JUNIPER-BFD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI -- [RFC2578] bfdSessIndex FROM BFD-STD-MIB -- [jnx-bfd-exp] DisplayString, TimeStamp, TruthValue FROM SNMPv2-TC jnxBfdMibRoot -- [jnx-smi] FROM JUNIPER-SMI ; jnxBfdMib MODULE-IDENTITY LAST-UPDATED "200610121200Z" -- 12 Oct 2006 12:00:00 EST ORGANIZATION "IETF" CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "Provides BFD specific data." -- Revision history. REVISION "200610121200Z" -- 12 Oct 2006 12:00:00 EST DESCRIPTION "Initial version." ::= { jnxBfdMibRoot 1 } -- Top level components of this MIB module. jnxBfdNotification OBJECT IDENTIFIER ::= { jnxBfdMib 0 } jnxBfdObjects OBJECT IDENTIFIER ::= { jnxBfdMib 1 } jnxBfdNotifyObjects OBJECT IDENTIFIER ::= { jnxBfdMib 2 } -- BFD Session Extn Table -- This table is a juniper extn to jnxSessTable jnxBfdSessTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the jnxBfd Session Table for providing enterprise specific options to the corresponding bfdSessTable entry." ::= { jnxBfdObjects 1 } jnxBfdSessEntry OBJECT-TYPE SYNTAX JnxBfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the jnxBfdSessTable. This essentially augments the bfdSessTable with additional objects." INDEX { bfdSessIndex } ::= { jnxBfdSessTable 1 } JnxBfdSessEntry ::= SEQUENCE { jnxBfdSessThreshTxInterval Unsigned32, jnxBfdSessCurrTxInterval Unsigned32, jnxBfdSessThreshDectTime Unsigned32, jnxBfdSessCurrDectTime Unsigned32, jnxBfdSessIntfName DisplayString } jnxBfdSessThreshTxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold value for transmit interval in microseconds. If the current transmit interval value adapts to a value greater than the threshold value, jnxBfdSessTxIntervalHigh trap is raised." ::= { jnxBfdSessEntry 1} jnxBfdSessCurrTxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The current transmit interval in microseconds." ::= { jnxBfdSessEntry 2} jnxBfdSessThreshDectTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold value for detection time in microseconds. If the current detection time value is greater than the threshold value at the time when session state changes to up(1), jnxBfdSessDetectionTimeHigh trap is raised." ::= { jnxBfdSessEntry 3} jnxBfdSessCurrDectTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of detection time for the session." ::= { jnxBfdSessEntry 4} jnxBfdSessIntfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the interface associated with the bfd session" ::= { jnxBfdSessEntry 5} -- Notification Objects jnxBfdSessifName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object gives the Interface Name in the bfdSessUp and bfdSessDown trap. Even though this object doesnt appear in the OBJECTS list of these traps, but the agent relay this information as an extra parameter in the trap." ::= { jnxBfdNotifyObjects 1} -- Notification Configuration jnxBfdSessTxIntervalHigh NOTIFICATION-TYPE OBJECTS {jnxBfdSessThreshTxInterval, jnxBfdSessCurrTxInterval } STATUS current DESCRIPTION "This notification is generated when the threshold value for transmit interval (jnxBfdSessThreshTxInterval) is set and the bfd session transmit interval (jnxBfdSessCurrTxInterval) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The transmit interval can continue to adapt beyond the threshold value. Adaptation of transmit interval happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor." ::= { jnxBfdNotification 1 } jnxBfdSessDetectionTimeHigh NOTIFICATION-TYPE OBJECTS {jnxBfdSessThreshDectTime, jnxBfdSessCurrDectTime } STATUS current DESCRIPTION "This notification is generated when the threshold value for detection time (jnxBfdSessThreshDectTime) is set and the bfd session detection-time (jnxBfdSessCurrDectTime) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The detection-time can continue to adapt beyond the threshold value. Adaptation of detection-time happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor." ::= { jnxBfdNotification 2 } END