JUNIPER-DFC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Counter64 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 2571 InterfaceIndex FROM IF-MIB jnxMibs, jnxDfcNotifications FROM JUNIPER-SMI; jnxDfc MODULE-IDENTITY LAST-UPDATED "200507082153Z" -- Fri Jul 08 21:53:48 2005 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "This is Juniper Networks' implementation of enterprise specific MIB for Dynamic Flow Capture (DFC)" ::= { jnxMibs 33 } jnxDfcCSTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxDfcCSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics information for Control Source." ::= { jnxDfc 1 } jnxDfcCSEntry OBJECT-TYPE SYNTAX JnxDfcCSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of DFC Control Source table." INDEX { jnxDfcGrpName, jnxDfcCSId } ::= { jnxDfcCSTable 1 } JnxDfcCSEntry ::= SEQUENCE { jnxDfcGrpName DisplayString, jnxDfcCSId DisplayString, jnxDfcCSControlProtocolAddRequests Counter64, jnxDfcCSCriteriaAdded Counter64, jnxDfcCSCriteriaAdditionFailed Counter64, jnxDfcCSControlProtocolDeleteRequests Counter64, jnxDfcCSCriteriaDeleted Counter64, jnxDfcCSCriteriaDeletionFailed Counter64, jnxDfcCSCriteriaDeletedTimeoutIdle Counter64, jnxDfcCSCriteriaDeletedTimeoutTotal Counter64, jnxDfcCSCriteriaDeletedPackets Counter64, jnxDfcCSCriteriaDeletedBytes Counter64, jnxDfcCSControlProtocolRefreshRequests Counter64, jnxDfcCSCriteriaRefreshed Counter64, jnxDfcCSCriteriaRefreshFailed Counter64, jnxDfcCSControlProtocolListRequests Counter64, jnxDfcCSListSuccess Counter64, jnxDfcCSListFailed Counter64, jnxDfcCSControlProtocolNoopRequests Counter64, jnxDfcCSNoopSuccess Counter64, jnxDfcCSNoopFailed Counter64, jnxDfcCSDynamicCriteriaActive Counter64, jnxDfcCSStaticCriteriaActive Counter64, jnxDfcCSBadRequest Counter64, jnxDfcCSResponseSuccessful Counter64, jnxDfcCSResponseImproperCriteria Counter64, jnxDfcCSResponseUnknownContentDest Counter64, jnxDfcCSResponseUnknownCriteriaId Counter64, jnxDfcCSResponseImproperTimeout Counter64, jnxDfcCSResponseInvalidAuthentication Counter64, jnxDfcCSResponseInvalidSequenceNumber Counter64, jnxDfcCSResponseInternalError Counter64, jnxDfcCSNotificationRestart Counter64, jnxDfcCSNotificationRollover Counter64, jnxDfcCSNotificationNoop Counter64, jnxDfcCSNotificationTimeout Counter64, jnxDfcCSNotificationCongestion Counter64, jnxDfcCSNotificationCongestionDelete Counter64, jnxDfcCSNotificationDuplicatesDropped Counter64, jnxDfcCSAddRequestRate Counter64, jnxDfcCSAddRequestPeakRate Counter64, jnxDfcCSAggrCriteriaBandwidth Counter64, jnxDfcCSSequenceNumber Counter64 } jnxDfcGrpName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name assigned to a DFC group. A DFC group defines a set of DFC PICs that share same static/dynamic configuration." ::= { jnxDfcCSEntry 1 } jnxDfcCSId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Control Source identifier. Control Source identifies Juniper router with one unique Control IP address. There can be multiple IP addresses from which a Control Source can send Control protocol request to Juniper router." ::= { jnxDfcCSEntry 2 } jnxDfcCSControlProtocolAddRequests OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Control protocol Add requests received. The add request specifies a new filter criteria to be merged with the existing tasking list for a given Control Source and Content Destination." ::= { jnxDfcCSEntry 3 } jnxDfcCSCriteriaAdded OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of filter criteria added successfully by the Control Source." ::= { jnxDfcCSEntry 4 } jnxDfcCSCriteriaAdditionFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of filter criteria addition failed." ::= { jnxDfcCSEntry 5 } jnxDfcCSControlProtocolDeleteRequests OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Control protocol delete requests received. The delete request removes a particular filter criterion." ::= { jnxDfcCSEntry 6 } jnxDfcCSCriteriaDeleted OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of filter criteria deleted successfully as requested by Control Source." ::= { jnxDfcCSEntry 7 } jnxDfcCSCriteriaDeletionFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of filter criteria deletion failed." ::= { jnxDfcCSEntry 8 } jnxDfcCSCriteriaDeletedTimeoutIdle OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of criteria deleted by timeout idle." ::= { jnxDfcCSEntry 9 } jnxDfcCSCriteriaDeletedTimeoutTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of criteria deleted by timeout total." ::= { jnxDfcCSEntry 10 } jnxDfcCSCriteriaDeletedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of criteria deleted by packets." ::= { jnxDfcCSEntry 11 } jnxDfcCSCriteriaDeletedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of criteria deleted by bytes." ::= { jnxDfcCSEntry 12 } jnxDfcCSControlProtocolRefreshRequests OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Control protocol Refresh requests received. The refresh request updates the timeout for a particular filter criterion or set of filter criteria for the particular Control Source to a particular Content Destination." ::= { jnxDfcCSEntry 13 } jnxDfcCSCriteriaRefreshed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of filter criteria refreshed successfully as requested by Control Source." ::= { jnxDfcCSEntry 14 } jnxDfcCSCriteriaRefreshFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of filter criteria refresh request failed." ::= { jnxDfcCSEntry 15 } jnxDfcCSControlProtocolListRequests OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Control protocol List requests received. The List request returns a list of all criteria that a particular Control Source has added and are currently active." ::= { jnxDfcCSEntry 16 } jnxDfcCSListSuccess OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of list commands processed successfully as requested by Control Source." ::= { jnxDfcCSEntry 17 } jnxDfcCSListFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of list commands that could not be processed successfully." ::= { jnxDfcCSEntry 18 } jnxDfcCSControlProtocolNoopRequests OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Control protocol Noop requests received. The purpose of this request is to verify the end-to-end connectivity between Control Source and DFC PIC." ::= { jnxDfcCSEntry 19 } jnxDfcCSNoopSuccess OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Noop requests processed successfully as requested by Control Source." ::= { jnxDfcCSEntry 20 } jnxDfcCSNoopFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Noop requests that could not be processed successfully." ::= { jnxDfcCSEntry 21 } jnxDfcCSDynamicCriteriaActive OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active dynamic filter criteria." ::= { jnxDfcCSEntry 22 } jnxDfcCSStaticCriteriaActive OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active static filter criteria." ::= { jnxDfcCSEntry 23 } jnxDfcCSBadRequest OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Bad requests received." ::= { jnxDfcCSEntry 24 } jnxDfcCSResponseSuccessful OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful response(s) corresponding to the requests (add, delete, refresh, list and noop) sent out to the Control Source." ::= { jnxDfcCSEntry 25 } jnxDfcCSResponseImproperCriteria OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of response(s) generated because of improper filter criterion specification in the add request." ::= { jnxDfcCSEntry 26 } jnxDfcCSResponseUnknownContentDest OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of response(s) generated because of unknown Content Destination specified in the add, delete, refresh and list request." ::= { jnxDfcCSEntry 27 } jnxDfcCSResponseUnknownCriteriaId OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of response(s) generated because of unknown Criteria Identifier specified in the delete, refresh and list request." ::= { jnxDfcCSEntry 28 } jnxDfcCSResponseImproperTimeout OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of response(s) generated because of improper timeout specified in the add and refresh request." ::= { jnxDfcCSEntry 29 } jnxDfcCSResponseInvalidAuthentication OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of response(s) generated because of invalid authentication specified in the add, delete, refresh, list and noop request." ::= { jnxDfcCSEntry 30 } jnxDfcCSResponseInvalidSequenceNumber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of response(s) generated because of invalid Sequence Number specified in the add, delete, refresh, list and noop request." ::= { jnxDfcCSEntry 31 } jnxDfcCSResponseInternalError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of response(s) generated because of internal error at the DFC PIC in processing a request." ::= { jnxDfcCSEntry 32 } jnxDfcCSNotificationRestart OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Restart notifications sent to configured notification-recipients. This notification will be generated when the system experiences a failure such that all the DFC filter criteria are lost." ::= { jnxDfcCSEntry 33 } jnxDfcCSNotificationRollover OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Rollover notifications sent to configured notification-recipients. This notification will be generated when the DFC PIC experiences a sequence number rollover." ::= { jnxDfcCSEntry 34 } jnxDfcCSNotificationNoop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Noop notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC receives a Noop message with the SendAsync parameter present." ::= { jnxDfcCSEntry 35 } jnxDfcCSNotificationTimeout OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Timeout notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC times out a filter criterion on any one of its configured timeout parameters and the criterion contains a SendTimeoutAsync parameter." ::= { jnxDfcCSEntry 36 } jnxDfcCSNotificationCongestion OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Congestion notifications sent to configured notification-recipents. This notification will be generated when the 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured soft limit for that destination." ::= { jnxDfcCSEntry 37 } jnxDfcCSNotificationCongestionDelete OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Congestion Delete notifications sent to configured notification-recipents. This notification will be generated when the total 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured hard limit for that destination." ::= { jnxDfcCSEntry 38 } jnxDfcCSNotificationDuplicatesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Duplicates Dropped notifications sent to configured notification-recipents. This notification will be generated when the configurable Maximum Duplicates parameter has been exceeded in such a way as to cause packets matching criteria added by the corresponding Control Source to be dropped." ::= { jnxDfcCSEntry 39 } jnxDfcCSAddRequestRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The request processing rate (requests processed/second)." ::= { jnxDfcCSEntry 40 } jnxDfcCSAddRequestPeakRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak request processing rate (requests processed/second)." ::= { jnxDfcCSEntry 41 } jnxDfcCSAggrCriteriaBandwidth OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bandwidth in bits/second." ::= { jnxDfcCSEntry 42 } jnxDfcCSSequenceNumber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol sequence number." ::= { jnxDfcCSEntry 43 } ------------------------------------------------------------ jnxDfcCDTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxDfcCDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics information for content destination." ::= { jnxDfc 2 } jnxDfcCDEntry OBJECT-TYPE SYNTAX JnxDfcCDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of DFC Content-Destination table." INDEX { jnxDfcGrpName, jnxDfcCDId } ::= { jnxDfcCDTable 1 } JnxDfcCDEntry ::= SEQUENCE { jnxDfcCDId DisplayString, jnxDfcCDCriteria Counter64, jnxDfcCDByteRate Counter64, jnxDfcCDMatchedPackets Counter64, jnxDfcCDMatchedBytes Counter64, jnxDfcCDCongestionNotification Counter64 } jnxDfcCDId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Content Destination identifier. A Content Destination is the recipient of the extracted data, once it is forwarded by the Server." ::= { jnxDfcCDEntry 1 } jnxDfcCDCriteria OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of filter criteria configured for the Content Destination." ::= { jnxDfcCDEntry 2 } jnxDfcCDByteRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average data rate (in bytes/second) summed over all active filter criteria to a configured Content Destination." ::= { jnxDfcCDEntry 3 } jnxDfcCDMatchedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets matching the filter criteria configured for the Content Destination." ::= { jnxDfcCDEntry 4 } jnxDfcCDMatchedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes matching the filter criteria configured for the Content Destination." ::= { jnxDfcCDEntry 5 } jnxDfcCDCongestionNotification OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Congestion Notifications sent to a configured notification-recipient." ::= { jnxDfcCDEntry 6 } -- -- DFC PIC Notification objects -- jnxDfcNotifyVars OBJECT-IDENTITY STATUS current DESCRIPTION "Notification object definitions." ::= { jnxDfc 3 } jnxDfcInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The textual name of the DFC interface." ::= { jnxDfcNotifyVars 1 } jnxDfcInputPktRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "data packet rate (in packets per second)." ::= { jnxDfcNotifyVars 2 } jnxDfcPpsSoftOverloadLowWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Configured lowest value for data packet rate (in packets per second)." ::= { jnxDfcNotifyVars 3 } jnxDfcPpsSoftOverloadHighWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Configured highest value for data packet rate (in packets per second)." ::= { jnxDfcNotifyVars 4 } jnxDfcPpsHardOverloadLowWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Recommended lowest value for data packet rate (in packets per second)." ::= { jnxDfcNotifyVars 5 } jnxDfcPpsHardOverloadHighWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Recommended highest value for data packet rate (in packets per second)." ::= { jnxDfcNotifyVars 6 } jnxDfcFlowsUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "% usage of total number of flows in system." ::= { jnxDfcNotifyVars 7 } jnxDfcCriteriaUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "% usage of matching criteria for all filters." ::= { jnxDfcNotifyVars 8 } jnxDfcMemSoftOverloadLowWatermark OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Configured lowest watermark percent for memory load." ::= { jnxDfcNotifyVars 9 } jnxDfcMemSoftOverloadHighWatermark OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Configured highest watermark percent for memory load." ::= { jnxDfcNotifyVars 10 } jnxDfcFlowLowWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Recommended lowest value for number of flows allowed in the system." ::= { jnxDfcNotifyVars 11 } jnxDfcFlowHighWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Recommended highest value for number of flows allowed in the system." ::= { jnxDfcNotifyVars 12 } jnxDfcCriteriaLowWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Recommended lowest value for number of criterias allowed in the system." ::= { jnxDfcNotifyVars 13 } jnxDfcCriteriaHighWatermark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Recommended highest value for number of criterias allowed in the system." ::= { jnxDfcNotifyVars 14 } -- -- DFC PIC Notification definitions -- jnxDfcNotificationPrefix OBJECT-IDENTITY STATUS current DESCRIPTION "All DFC notifications are registered under this branch." ::= { jnxDfcNotifications 0 } jnxDfcSoftPpsThresholdExceeded NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcInputPktRate, jnxDfcPpsSoftOverloadLowWatermark, jnxDfcPpsSoftOverloadHighWatermark} STATUS current DESCRIPTION "Notification of input packet rate (in packet per second) going beyond the configured limit." ::= { jnxDfcNotificationPrefix 1 } jnxDfcSoftPpsUnderThreshold NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcInputPktRate, jnxDfcPpsSoftOverloadLowWatermark, jnxDfcPpsSoftOverloadHighWatermark} STATUS current DESCRIPTION "Notification of input packet rate (in packet per second) dropping back to below the configured limit." ::= { jnxDfcNotificationPrefix 2 } jnxDfcHardPpsThresholdExceeded NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcInputPktRate, jnxDfcPpsHardOverloadLowWatermark, jnxDfcPpsHardOverloadHighWatermark} STATUS current DESCRIPTION "Notification of input packet rate (in packet per second) going beyond the recommended limit." ::= { jnxDfcNotificationPrefix 3 } jnxDfcHardPpsUnderThreshold NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcInputPktRate, jnxDfcPpsHardOverloadLowWatermark, jnxDfcPpsHardOverloadHighWatermark} STATUS current DESCRIPTION "Notification of input packet rate (in packet per second) dropping back to below the recommended limit." ::= { jnxDfcNotificationPrefix 4 } jnxDfcSoftMemThresholdExceeded NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcFlowsUsage, jnxDfcCriteriaUsage, jnxDfcMemSoftOverloadLowWatermark, jnxDfcMemSoftOverloadHighWatermark} STATUS current DESCRIPTION "Notification of memory overload condition i.e memory usage is going beyond the configured limit." ::= { jnxDfcNotificationPrefix 5 } jnxDfcSoftMemUnderThreshold NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcFlowsUsage, jnxDfcCriteriaUsage, jnxDfcMemSoftOverloadLowWatermark, jnxDfcMemSoftOverloadHighWatermark} STATUS current DESCRIPTION "Notification of memory usage dropping back to below the configured limit." ::= { jnxDfcNotificationPrefix 6 } jnxDfcHardMemThresholdExceeded NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcFlowsUsage, jnxDfcFlowLowWatermark, jnxDfcFlowHighWatermark, jnxDfcCriteriaUsage, jnxDfcCriteriaLowWatermark, jnxDfcCriteriaHighWatermark} STATUS current DESCRIPTION "Notification of memory overload condition i.e memory usage is going beyond the recommended limit." ::= { jnxDfcNotificationPrefix 7 } jnxDfcHardMemUnderThreshold NOTIFICATION-TYPE OBJECTS { jnxDfcInterfaceName, jnxDfcFlowsUsage, jnxDfcFlowLowWatermark, jnxDfcFlowHighWatermark, jnxDfcCriteriaUsage, jnxDfcCriteriaLowWatermark, jnxDfcCriteriaHighWatermark} STATUS current DESCRIPTION "Notification of memory usage dropping back to below the recommended limit." ::= { jnxDfcNotificationPrefix 8 } END