-- -- Juniper Enterprise Specific MIB: Fabric Chassis MIB -- -- Copyright (c) 2012, Juniper Networks, Inc. -- All rights reserved. -- JUNIPER-FABRIC-CHASSIS DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, TimeTicks FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC jnxDcfMibRoot, jnxFabricChassisTraps, jnxFabricChassisOKTraps FROM JUNIPER-SMI JnxChassisId FROM JUNIPER-MIB; jnxFabricAnatomy MODULE-IDENTITY LAST-UPDATED "201209130000Z" -- Thur Sept 13 00:00:00 2012 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "The MIB modules representing Juniper Networks' Quantum Fabric hardware components." REVISION "201209130000Z" -- Thur Sept 13 00:00:00 2012 UTC DESCRIPTION "Added director group device (DG) enum to JnxFabricContainersFamily." REVISION "201207260000Z" -- Thur July 26 00:00:00 2012 UTC DESCRIPTION "Modified the description for JnxFabricDeviceId. Added ufabric as part of JnxFabricContainersFamily." ::= { jnxDcfMibRoot 2 } jnxFabricAnatomyScalars OBJECT IDENTIFIER ::= { jnxFabricAnatomy 1 } jnxFabricAnatomyTables OBJECT IDENTIFIER ::= { jnxFabricAnatomy 2 } -- -- Textual Conventions -- JnxFabricDeviceId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The device identifier assigned to the individual devices across the fabric by SFC. This shall be a unique index for each of the devices constituting the fabric." SYNTAX Integer32 (1..2147483647) JnxFabricContainersFamily ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The family of container that defines the device." SYNTAX INTEGER { fabricChassis(1), fabricNode(2), ufabric(3), directorGroupDevice(4) } -- Juniper Fabric Anatomy MIB -- -- Fabric Scalar Objects jnxFabricClass OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The product line of the fabric switch." ::= { jnxFabricAnatomyScalars 1 } jnxFabricDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name, model, or detailed description of the fabric, indicating which product the fabric is about." ::= { jnxFabricAnatomyScalars 2 } jnxFabricSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this subject, blank if unknown or unavailable." ::= { jnxFabricAnatomyScalars 3 } jnxFabricRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision of this subject, blank if unknown or unavailable." ::= { jnxFabricAnatomyScalars 4 } jnxFabricFirmwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware (u-boot) revision of this subject, blank if unknown or unavailable." ::= { jnxFabricAnatomyScalars 5 } jnxFabricLastInstalled OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up." ::= { jnxFabricAnatomyScalars 6 } jnxFabricContentsLastChange OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the fabric contents table last changed. Zero if unknown or already existing when the agent was up." ::= { jnxFabricAnatomyScalars 7 } jnxFabricFilledLastChange OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the fabric filled status table last changed. Zero if unknown or already at that state when the agent was up." ::= { jnxFabricAnatomyScalars 8 } -- -- Fabric Device Table -- jnxFabricDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFabricDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of fabric device entries." ::= { jnxFabricAnatomyTables 1 } jnxFabricDeviceEntry OBJECT-TYPE SYNTAX JnxFabricDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of fabric device table." INDEX { jnxFabricDeviceIndex } ::= { jnxFabricDeviceTable 1 } JnxFabricDeviceEntry ::= SEQUENCE { jnxFabricDeviceIndex JnxFabricDeviceId, jnxFabricDeviceEntryContainersFamily JnxFabricContainersFamily, jnxFabricDeviceEntryClass OBJECT IDENTIFIER, jnxFabricDeviceEntryModel OBJECT IDENTIFIER, jnxFabricDeviceEntryDescr DisplayString, jnxFabricDeviceEntrySerialNo DisplayString, jnxFabricDeviceEntryName DisplayString, jnxFabricDeviceEntryRevision DisplayString, jnxFabricDeviceEntryFirmwareRevision DisplayString, jnxFabricDeviceEntryInstalled TimeTicks, jnxFabricDeviceEntryContentsLastChange TimeTicks, jnxFabricDeviceEntryFilledLastChange TimeTicks, jnxFabricDeviceEntryKernelMemoryUsedPercent Integer32 } jnxFabricDeviceIndex OBJECT-TYPE SYNTAX JnxFabricDeviceId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the device on which the contents of this row exists." ::= { jnxFabricDeviceEntry 1 } jnxFabricDeviceEntryContainersFamily OBJECT-TYPE SYNTAX JnxFabricContainersFamily MAX-ACCESS read-only STATUS current DESCRIPTION "The family of container that defines this device." ::= { jnxFabricDeviceEntry 2 } jnxFabricDeviceEntryClass OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The productline of the device entry." ::= { jnxFabricDeviceEntry 3 } jnxFabricDeviceEntryModel OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The model object identifier of the device entry." ::= { jnxFabricDeviceEntry 4 } jnxFabricDeviceEntryDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of the device entry." ::= { jnxFabricDeviceEntry 5 } jnxFabricDeviceEntrySerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this subject, blank if unknown or unavailable." ::= { jnxFabricDeviceEntry 6 } jnxFabricDeviceEntryName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this subject which is same as the serial number unless a device alias has been configured." ::= { jnxFabricDeviceEntry 7 } jnxFabricDeviceEntryRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision of this subject, blank if unknown or unavailable." ::= { jnxFabricDeviceEntry 8 } jnxFabricDeviceEntryFirmwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware (u-boot) revision of this subject, blank if unknown or unavailable." ::= { jnxFabricDeviceEntry 9 } jnxFabricDeviceEntryInstalled OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up." ::= { jnxFabricDeviceEntry 10 } jnxFabricDeviceEntryContentsLastChange OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the contents table last changed. Zero if unknown or already existing when the agent was up." ::= { jnxFabricDeviceEntry 11 } jnxFabricDeviceEntryFilledLastChange OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the filled status table last changed. Zero if unknown or already at that state when the agent was up." ::= { jnxFabricDeviceEntry 12 } jnxFabricDeviceEntryKernelMemoryUsedPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of kernel memory used of this subject. 0 if unavailable or inapplicable." ::= { jnxFabricDeviceEntry 13 } -- -- Fabric Containers Table -- jnxFabricContainersTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFabricContainersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of containers entries." ::= { jnxFabricAnatomyTables 2 } jnxFabricContainersEntry OBJECT-TYPE SYNTAX JnxFabricContainersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of containers table. Each entry is indexed by the container table type and the container index." INDEX { jnxFabricContainersFamily, jnxFabricContainersIndex } ::= { jnxFabricContainersTable 1 } JnxFabricContainersEntry ::= SEQUENCE { jnxFabricContainersFamily JnxFabricContainersFamily, jnxFabricContainersIndex Integer32, jnxFabricContainersView BITS, jnxFabricContainersLevel INTEGER, jnxFabricContainersWithin Integer32, jnxFabricContainersType OBJECT IDENTIFIER, jnxFabricContainersDescr DisplayString, jnxFabricContainersCount Integer32 } jnxFabricContainersFamily OBJECT-TYPE SYNTAX JnxFabricContainersFamily MAX-ACCESS read-only STATUS current DESCRIPTION "The family of container." ::= { jnxFabricContainersEntry 1 } jnxFabricContainersIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index for this entry." ::= { jnxFabricContainersEntry 2 } jnxFabricContainersView OBJECT-TYPE SYNTAX BITS { viewFront(0), viewRear(1), viewTop(2), viewBottom(3), viewLeftHandSide(4), viewRightHandSide(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The view(s) from which the specific container appears. This variable indicates that the specific container is embedded and accessible from the corresponding view(s). The value is a bit map represented as a sum. If multiple bits are set, the specified container(s) are located and accessible from that set of views. The various values representing the bit positions and its corresponding views are: 1 front 2 rear 4 top 8 bottom 16 leftHandSide 32 rightHandSide Note 1: LefHandSide and rightHandSide are referred to based on the view from the front. Note 2: If the specified containers are scattered around various views, the numbering is according to the following sequence: front -> rear -> top -> bottom -> leftHandSide -> rightHandSide For each view plane, the numbering sequence is first from left to right, and then from up to down. Note 3: Even though the value in chassis hardware (e.g. slot number) may be labelled from 0, 1, 2, and up, all the indices in MIB start with 1 (not 0) according to network management convention." ::= { jnxFabricContainersEntry 3 } jnxFabricContainersLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The abstraction level of the chassis or device. It is enumerated from the outside to the inside, from the outer layer to the inner layer. For example, top level (i.e. level 0) refers to chassis frame, level 1 FPC slot within chassis frame, level 2 PIC space within FPC slot." ::= { jnxFabricContainersEntry 4 } jnxFabricContainersWithin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of its next higher level container housing this entry. The associated jnxFabricContainersIndex in the jnxFabricContainersTable represents its next higher level container." ::= { jnxFabricContainersEntry 5 } jnxFabricContainersType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this container." ::= { jnxFabricContainersEntry 6 } jnxFabricContainersDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFabricContainersEntry 7 } jnxFabricContainersCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of containers of this level per container of the next higher level. e.g. if there are six level 2 containers in level 1 container, then jnxFabricContainersCount for level 2 is six." ::= { jnxFabricContainersEntry 8 } -- -- Fabric Contents Table -- jnxFabricContentsTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFabricContentsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of contents entries." ::= { jnxFabricAnatomyTables 3 } jnxFabricContentsEntry OBJECT-TYPE SYNTAX JnxFabricContentsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of contents table." INDEX { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricContentsL3Index } ::= { jnxFabricContentsTable 1 } JnxFabricContentsEntry ::= SEQUENCE { jnxFabricContentsContainerIndex Integer32, jnxFabricContentsL1Index Integer32, jnxFabricContentsL2Index Integer32, jnxFabricContentsL3Index Integer32, jnxFabricContentsType OBJECT IDENTIFIER, jnxFabricContentsDescr DisplayString, jnxFabricContentsSerialNo DisplayString, jnxFabricContentsRevision DisplayString, jnxFabricContentsInstalled TimeTicks, jnxFabricContentsPartNo DisplayString, jnxFabricContentsChassisId JnxChassisId, jnxFabricContentsChassisDescr DisplayString, jnxFabricContentsChassisCleiCode DisplayString } jnxFabricContentsContainerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxFabricContainersIndex in the jnxFabricContainersTable." ::= { jnxFabricContentsEntry 1 } jnxFabricContentsL1Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFabricContentsEntry 2 } jnxFabricContentsL2Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFabricContentsEntry 3 } jnxFabricContentsL3Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFabricContentsEntry 4 } jnxFabricContentsType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this subject. zeroDotZero if unknown." ::= { jnxFabricContentsEntry 5 } jnxFabricContentsDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFabricContentsEntry 6 } jnxFabricContentsSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this subject, blank if unknown or unavailable." ::= { jnxFabricContentsEntry 7 } jnxFabricContentsRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision of this subject, blank if unknown or unavailable." ::= { jnxFabricContentsEntry 8 } jnxFabricContentsInstalled OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up." ::= { jnxFabricContentsEntry 9 } jnxFabricContentsPartNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The part number of this subject, blank if unknown or unavailable." ::= { jnxFabricContentsEntry 10 } jnxFabricContentsChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxFabricContentsEntry 11 } jnxFabricContentsChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxFabricContentsEntry 12 } jnxFabricContentsChassisCleiCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The clei code of this subject, blank if unknown or unavailable. A CLEI code is an intelligent code that consists of 10 alphanumeric characters with 4 data elements. The first data element is considered the basic code with the first 2 characters indicating the technology or equipment type, and the third and fourth characters denoting the functional sub-category. The second data element represents the features, and its three characters denote functional capabilities or changes. The third data element has one character and denotes a reference to a manufacturer, system ID, specification, or drawing. The fourth data element consists of two characters and contains complementary data. These two characters provide a means of differentiating or providing uniqueness between the eight character CLEI codes by identifying the manufacturing vintage of the product. Names are assigned via procedures defined in [GR485]. The assigned maintenance agent for the CLEI code, Telcordia Technologies, is responsible for assigning certain equipment and other identifiers (e.g., location, manufacturer/supplier) for the telecommunications industry." ::= { jnxFabricContentsEntry 13 } -- -- Fabric Filled Status Table -- -- This table show the empty/filled status of the container in the -- fabric containers table. -- jnxFabricFilledTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFabricFilledEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filled status entries." ::= { jnxFabricAnatomyTables 4 } jnxFabricFilledEntry OBJECT-TYPE SYNTAX JnxFabricFilledEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of filled status table." INDEX { jnxFabricDeviceIndex, jnxFabricFilledContainerIndex, jnxFabricFilledL1Index, jnxFabricFilledL2Index, jnxFabricFilledL3Index } ::= { jnxFabricFilledTable 1 } JnxFabricFilledEntry ::= SEQUENCE { jnxFabricFilledContainerIndex Integer32, jnxFabricFilledL1Index Integer32, jnxFabricFilledL2Index Integer32, jnxFabricFilledL3Index Integer32, jnxFabricFilledDescr DisplayString, jnxFabricFilledState INTEGER, jnxFabricFilledChassisId JnxChassisId, jnxFabricFilledChassisDescr DisplayString } jnxFabricFilledContainerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxFabricContainersIndex in the jnxFabricContainersTable." ::= { jnxFabricFilledEntry 1 } jnxFabricFilledL1Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFabricFilledEntry 2 } jnxFabricFilledL2Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFabricFilledEntry 3 } jnxFabricFilledL3Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFabricFilledEntry 4 } jnxFabricFilledDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFabricFilledEntry 5 } jnxFabricFilledState OBJECT-TYPE SYNTAX INTEGER { unknown(1), empty(2), filled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The filled state of this subject." ::= { jnxFabricFilledEntry 6 } jnxFabricFilledChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxFabricFilledEntry 7 } jnxFabricFilledChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxFabricFilledEntry 8 } -- -- Fabric Operating Status Table -- -- This table reveals the operating status of some subjects -- of interest in the fabric contents table. -- jnxFabricOperatingTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFabricOperatingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of operating status entries." ::= { jnxFabricAnatomyTables 5 } jnxFabricOperatingEntry OBJECT-TYPE SYNTAX JnxFabricOperatingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of operating status table." INDEX { jnxFabricDeviceIndex, jnxFabricOperatingContentsIndex, jnxFabricOperatingL1Index, jnxFabricOperatingL2Index, jnxFabricOperatingL3Index } ::= { jnxFabricOperatingTable 1 } JnxFabricOperatingEntry ::= SEQUENCE { jnxFabricOperatingContentsIndex Integer32, jnxFabricOperatingL1Index Integer32, jnxFabricOperatingL2Index Integer32, jnxFabricOperatingL3Index Integer32, jnxFabricOperatingDescr DisplayString, jnxFabricOperatingState INTEGER, jnxFabricOperatingTemp Integer32, jnxFabricOperatingCPU Integer32, jnxFabricOperatingISR Integer32, jnxFabricOperatingDRAMSize Integer32, jnxFabricOperatingBuffer Integer32, jnxFabricOperatingHeap Integer32, jnxFabricOperatingUpTime TimeTicks, jnxFabricOperatingLastRestart TimeTicks, jnxFabricOperatingMemory Integer32, jnxFabricOperatingStateOrdered INTEGER, jnxFabricOperatingChassisId JnxChassisId, jnxFabricOperatingChassisDescr DisplayString, jnxFabricOperatingRestartTime DateAndTime, jnxFabricOperating1MinLoadAvg Integer32, jnxFabricOperating5MinLoadAvg Integer32, jnxFabricOperating15MinLoadAvg Integer32 } jnxFabricOperatingContentsIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxFabricContentsContainerIndex in the jnxFabricContentsTable." ::= { jnxFabricOperatingEntry 1 } jnxFabricOperatingL1Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 2 } jnxFabricOperatingL2Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 3 } jnxFabricOperatingL3Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 4 } jnxFabricOperatingDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFabricOperatingEntry 5 } jnxFabricOperatingState OBJECT-TYPE SYNTAX INTEGER { unknown(1), running(2), -- up and running, -- as a active primary ready(3), -- ready to run, not running yet reset(4), -- held in reset, not ready yet runningAtFullSpeed(5), -- valid for fans only down(6), -- down or off, for power supply standby(7) -- running as a standby backup } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating state of this subject." ::= { jnxFabricOperatingEntry 6 } jnxFabricOperatingTemp OBJECT-TYPE SYNTAX Integer32 UNITS "Celsius (degrees C)" MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 7 } jnxFabricOperatingCPU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization in percentage of this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 8 } jnxFabricOperatingISR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization in percentage of this subject spending in interrupt service routine (ISR). Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 9 } jnxFabricOperatingDRAMSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The DRAM size in bytes of this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 10 } jnxFabricOperatingBuffer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The buffer pool utilization in percentage of this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 11 } jnxFabricOperatingHeap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The heap utilization in percentage of this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 12 } jnxFabricOperatingUpTime OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval in 10-millisecond period that this subject has been up and running. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 13 } jnxFabricOperatingLastRestart OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this subject last restarted. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 14 } jnxFabricOperatingMemory OBJECT-TYPE SYNTAX Integer32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The installed memory size in Megabytes of this subject. Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 15 } jnxFabricOperatingStateOrdered OBJECT-TYPE SYNTAX INTEGER { running(1), -- up and running, -- as a active primary standby(2), -- running as a standby backup ready(3), -- ready to run, not running yet runningAtFullSpeed(4), -- valid for fans only reset(5), -- held in reset, not ready yet down(6), -- down or off, for power supply unknown(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating state of this subject. Identical to jnxFabricOperatingState, but with enums ordered from 'most operational' to 'least operational' states." ::= { jnxFabricOperatingEntry 16 } jnxFabricOperatingChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxFabricOperatingEntry 17 } jnxFabricOperatingChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxFabricOperatingEntry 18 } jnxFabricOperatingRestartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which this entity last restarted." ::= { jnxFabricOperatingEntry 19 } jnxFabricOperating1MinLoadAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU Load Average over the last 1 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 20 } jnxFabricOperating5MinLoadAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU Load Average over the last 5 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 21 } jnxFabricOperating15MinLoadAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU Load Average over the last 15 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable." ::= { jnxFabricOperatingEntry 22 } -- -- Fabric Redundancy Information Table -- -- This table shows the internal configuration setting for the -- available redundant subsystems or components in the fabric. -- jnxFabricRedundancyTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFabricRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of redundancy information entries." ::= { jnxFabricAnatomyTables 6 } jnxFabricRedundancyEntry OBJECT-TYPE SYNTAX JnxFabricRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the redundancy information table." INDEX { jnxFabricDeviceIndex, jnxFabricRedundancyContentsIndex, jnxFabricRedundancyL1Index, jnxFabricRedundancyL2Index, jnxFabricRedundancyL3Index } ::= { jnxFabricRedundancyTable 1 } JnxFabricRedundancyEntry ::= SEQUENCE { jnxFabricRedundancyContentsIndex Integer32, jnxFabricRedundancyL1Index Integer32, jnxFabricRedundancyL2Index Integer32, jnxFabricRedundancyL3Index Integer32, jnxFabricRedundancyDescr DisplayString, jnxFabricRedundancyConfig INTEGER, jnxFabricRedundancyState INTEGER, jnxFabricRedundancySwitchoverCount Counter32, jnxFabricRedundancySwitchoverTime TimeTicks, jnxFabricRedundancySwitchoverReason INTEGER, jnxFabricRedundancyKeepaliveHeartbeat Integer32, jnxFabricRedundancyKeepaliveTimeout Integer32, jnxFabricRedundancyKeepaliveElapsed Integer32, jnxFabricRedundancyKeepaliveLoss Counter32, jnxFabricRedundancyChassisId JnxChassisId, jnxFabricRedundancyChassisDescr DisplayString } jnxFabricRedundancyContentsIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxFabricContentsContainerIndex in the jnxFabricContentsTable." ::= { jnxFabricRedundancyEntry 1 } jnxFabricRedundancyL1Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricRedundancyEntry 2 } jnxFabricRedundancyL2Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricRedundancyEntry 3 } jnxFabricRedundancyL3Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricRedundancyEntry 4 } jnxFabricRedundancyDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFabricRedundancyEntry 5 } jnxFabricRedundancyConfig OBJECT-TYPE SYNTAX INTEGER { unknown(1), master(2), -- election priority set as a master backup(3), -- election priority set as a backup disabled(4), -- election disabled notApplicable(5) -- any among the available can be master } MAX-ACCESS read-only STATUS current DESCRIPTION "The election priority of redundancy configuration for this subject. The value 'notApplicable' means no specific instance is configured to be master or backup; whichever component boots up first becomes a master." ::= { jnxFabricRedundancyEntry 6 } jnxFabricRedundancyState OBJECT-TYPE SYNTAX INTEGER { unknown(1), master(2), -- master backup(3), -- backup disabled(4) -- disabled } MAX-ACCESS read-only STATUS current DESCRIPTION "The current running state for this subject." ::= { jnxFabricRedundancyEntry 7 } jnxFabricRedundancySwitchoverCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of switchover as perceived by this subject since routing engine is up and running. The switchover is defined as a change in state of jnxFabricRedundancyState from master to backup or vice versa. Its value is reset when the routing engine is reset or rebooted." ::= { jnxFabricRedundancyEntry 8 } jnxFabricRedundancySwitchoverTime OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the jnxFabricRedundancyState of this subject was last switched over from master to backup or vice versa. Zero if unknown or never switched over since the routing engine is up and running." ::= { jnxFabricRedundancyEntry 9 } jnxFabricRedundancySwitchoverReason OBJECT-TYPE SYNTAX INTEGER { other(1), -- others neverSwitched(2), -- never switched userSwitched(3), -- user-initiated switchover autoSwitched(4) -- automatic switchover } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason of the last switchover for this subject." ::= { jnxFabricRedundancyEntry 10 } jnxFabricRedundancyKeepaliveHeartbeat OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The period of sending keepalive messages between the master and backup subsystems. It is a system-wide preset value in seconds used by internal mastership resolution. Zero if unavailable or inapplicable." ::= { jnxFabricRedundancyEntry 11 } jnxFabricRedundancyKeepaliveTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The timeout period in seconds, by the keepalive watchdog timer, before initiating a switch over to the backup subsystem. Zero if unavailable or inapplicable." ::= { jnxFabricRedundancyEntry 12 } jnxFabricRedundancyKeepaliveElapsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time in seconds by this subject since receiving the last keepalive message from the other subsystems. Zero if unavailable or inapplicable." ::= { jnxFabricRedundancyEntry 13 } jnxFabricRedundancyKeepaliveLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of losses on keepalive messages between the master and backup subsystems as perceived by this subject since the system is up and running. Zero if unavailable or inapplicable." ::= { jnxFabricRedundancyEntry 14 } jnxFabricRedundancyChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxFabricRedundancyEntry 15 } jnxFabricRedundancyChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxFabricRedundancyEntry 16 } -- -- FRU (Field Replaceable Unit) Status Table -- -- This table shows the status of the FRUs in the chassis' within the fabric -- jnxFabricFruTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFabricFruEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of FRU status entries." ::= { jnxFabricAnatomyTables 7 } jnxFabricFruEntry OBJECT-TYPE SYNTAX JnxFabricFruEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the FRU status table." INDEX { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index } ::= { jnxFabricFruTable 1 } JnxFabricFruEntry ::= SEQUENCE { jnxFabricFruContentsIndex Integer32, jnxFabricFruL1Index Integer32, jnxFabricFruL2Index Integer32, jnxFabricFruL3Index Integer32, jnxFabricFruName DisplayString, jnxFabricFruType INTEGER, jnxFabricFruSlot Integer32, jnxFabricFruState INTEGER, jnxFabricFruTemp Integer32, jnxFabricFruOfflineReason INTEGER, jnxFabricFruLastPowerOff TimeTicks, jnxFabricFruLastPowerOn TimeTicks, jnxFabricFruPowerUpTime TimeTicks, jnxFabricFruChassisId JnxChassisId, jnxFabricFruChassisDescr DisplayString, jnxFabricFruPsdAssignment Integer32 } jnxFabricFruContentsIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxFabricContentsContainerIndex in the jnxFabricContentsTable." ::= { jnxFabricFruEntry 1 } jnxFabricFruL1Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 2 } jnxFabricFruL2Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 3 } jnxFabricFruL3Index OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 4 } jnxFabricFruName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFabricFruEntry 5 } jnxFabricFruType OBJECT-TYPE SYNTAX INTEGER { other(1), -- unknown or others clockGenerator(2), -- CG flexiblePicConcentrator(3), -- FPC switchingAndForwardingModule(4), -- SFM controlBoard(5), -- CBD, SCB routingEngine(6), -- RE powerEntryModule(7), -- PEM frontPanelModule(8), -- FPM switchInterfaceBoard(9), -- SIB processorMezzanineBoardForSIB(10), -- SPMB portInterfaceCard(11), -- PIC craftInterfacePanel(12), -- CIP fan(13), -- fan lineCardChassis(14), -- LCC forwardingEngineBoard(15), -- FEB protectedSystemDomain(16) -- PSD } MAX-ACCESS read-only STATUS current DESCRIPTION "The FRU type for this subject." ::= { jnxFabricFruEntry 6 } jnxFabricFruSlot OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number of this subject. This is equivalent to jnxFabricFruL1Index in meaning. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 7 } jnxFabricFruState OBJECT-TYPE SYNTAX INTEGER { unknown(1), empty(2), present(3), ready(4), announceOnline(5), online(6), anounceOffline(7), offline(8), diagnostic(9), standby(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state for this subject." ::= { jnxFabricFruEntry 8 } jnxFabricFruTemp OBJECT-TYPE SYNTAX Integer32 UNITS "Celsius (degrees C)" MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 9 } jnxFabricFruOfflineReason OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- unknown or other none(2), -- none error(3), -- error noPower(4), -- no power configPowerOff(5), -- configured to power off configHoldInReset(6), -- configured to hold in reset cliCommand(7), -- offlined by cli command buttonPress(8), -- offlined by button press cliRestart(9), -- restarted by cli command overtempShutdown(10), -- overtemperature shutdown masterClockDown(11), -- master clock down singleSfmModeChange(12), -- single SFM mode change packetSchedulingModeChange(13), -- packet scheduling mode change physicalRemoval(14), -- physical removal unresponsiveRestart(15), -- restarting unresponsive board sonetClockAbsent(16), -- sonet out clock absent rddPowerOff(17), -- RDD power off majorErrors(18), -- major errors minorErrors(19), -- minor errors lccHardRestart(20), -- LCC hard restart lccVersionMismatch(21), -- LCC version mismatch powerCycle(22), -- power cycle reconnect(23), -- reconnect overvoltage(24), -- overvoltage pfeVersionMismatch(25), -- PFE version mismatch febRddCfgChange(26), -- FEB redundancy cfg changed fpcMisconfig(27), -- FPC is misconfigured fruReconnectFail(28), -- FRU did not reconnect fruFwddReset(29), -- FWDD reset the fru fruFebSwitch(30), -- FEB got switched fruFebOffline(31), -- FEB was offlined fruInServSoftUpgradeError(32), -- In Service Software Upgrade Error fruChasdPowerRatingExceed(33), -- Chassis power rating exceeded fruConfigOffline(34), -- Configured offline fruServiceRestartRequest(35), -- restarting request from a service spuResetRequest(36), -- SPU reset request spuFlowdDown(37), -- SPU flowd down spuSpi4Down(38), -- SPU SPI4 down spuWatchdogTimeout(39), -- SPU Watchdog timeout spuCoreDump(40), -- SPU kernel core dump fpgaSpi4LinkDown(41), -- FPGA SPI4 link down i3Spi4LinkDown(42), -- I3 SPI4 link down cppDisconnect(43), -- CPP disconnect cpuNotBoot(44), -- CPU not boot spuCoreDumpComplete(45), -- SPU kernel core dump complete rstOnSpcSpuFailure(46), -- Rst on SPC SPU failure softRstOnSpcSpuFailure(47), -- Soft Reset on SPC SPU failure hwAuthenticationFailure(48), -- HW authentication failure reconnectFpcFail(49), -- Reconnect FPC fail fpcAppFailed(50), -- FPC app failed fpcKernelCrash(51), -- FPC kernel crash spuFlowdDownNoCore(52), -- SPU flowd down, no core dump spuFlowdCoreDumpIncomplete(53), -- SPU flowd crash with incomplete core dump spuFlowdCoreDumpComplete(54), -- SPU flowd crash with complete core dump spuIdpdDownNoCore(55), -- SPU idpd down, no core dump spuIdpdCoreDumpIncomplete(56), -- SPU idpd crash with incomplete core dump spuIdpdCoreDumpComplete(57), -- SPU idpd crash with complete core dump spuCoreDumpIncomplete(58), -- SPU kernel crash with incomplete core dump spuIdpdDown(59), -- SPU idpd down fruPfeReset(60), -- PFE reset fruReconnectNotReady(61), -- FPC not ready to reconnect fruSfLinkDown(62), -- FE - Fabric links down fruFabricDown(63), -- Fabric transitioned from up to down fruAntiCounterfeitRetry(64), -- FPC offlined due to Anti Counterfeit Retry fruFPCChassisClusterDisable(65), -- FPC offlined due to Chassis Cluster Disable spuFipsError(66), -- SPU fips error fruFPCFabricDownOffline(67), -- FPC offlined due to Fabric down febCfgChange(68), -- FEB config change routeLocalizationRoleChange(69), -- Route localization role change fruFpcUnsupported(70), -- FPC unsupported psdVersionMismatch(71), -- PSD version mismatch fruResetThresholdExceeded(72), -- FRU Reset Threshold Exceeded picBounce(73), -- PIC Bounce badVoltage(74), -- bad voltage fruFPCReducedFabricBW(75) -- FPC offlined due to Reduced Fabric Bandwidth } MAX-ACCESS read-only STATUS current DESCRIPTION "The offline reason of this subject." ::= { jnxFabricFruEntry 10 } jnxFabricFruLastPowerOff OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this subject was last powered off. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 11 } jnxFabricFruLastPowerOn OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this subject was last powered on. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 12 } jnxFabricFruPowerUpTime OBJECT-TYPE SYNTAX TimeTicks UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval in 10-millisecond period that this subject has been up and running since the last power on time. Zero if unavailable or inapplicable." ::= { jnxFabricFruEntry 13 } jnxFabricFruChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxFabricFruEntry 14 } jnxFabricFruChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxFabricFruEntry 15 } jnxFabricFruPsdAssignment OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "The PSD assignment of this subject. Zero if unavailable or not applicable." ::= { jnxFabricFruEntry 16 } -- -- definition of chassis related traps -- -- Traps for chassis alarm conditions jnxFabricPowerSupplyFailure NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricContentsL3Index, jnxFabricContentsDescr, jnxFabricOperatingState } STATUS current DESCRIPTION "A jnxFabricPowerSupplyFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has been in the failure (bad DC output) condition." ::= { jnxFabricChassisTraps 1 } jnxFabricFanFailure NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricContentsL3Index, jnxFabricContentsDescr, jnxFabricOperatingState } STATUS current DESCRIPTION "A jnxFabricFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition." ::= { jnxFabricChassisTraps 2 } jnxFabricOverTemperature NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricContentsL3Index, jnxFabricContentsDescr, jnxFabricOperatingTemp } STATUS current DESCRIPTION "A jnxFabricOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition." ::= { jnxFabricChassisTraps 3 } jnxFabricRedundancySwitchover NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricRedundancyContentsIndex, jnxFabricRedundancyL1Index, jnxFabricRedundancyL2Index, jnxFabricRedundancyL3Index, jnxFabricRedundancyDescr, jnxFabricRedundancyConfig, jnxFabricRedundancyState, jnxFabricRedundancySwitchoverCount, jnxFabricRedundancySwitchoverTime, jnxFabricRedundancySwitchoverReason } STATUS current DESCRIPTION "A jnxFabricRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxFabricRedundancyState from master to backup or vice versa." ::= { jnxFabricChassisTraps 4 } jnxFabricFruRemoval NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis." ::= { jnxFabricChassisTraps 5 } jnxFabricFruInsertion NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis." ::= { jnxFabricChassisTraps 6 } jnxFabricFruPowerOff NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot, jnxFabricFruOfflineReason, jnxFabricFruLastPowerOff, jnxFabricFruLastPowerOn } STATUS current DESCRIPTION "A jnxFabricFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis." ::= { jnxFabricChassisTraps 7 } jnxFabricFruPowerOn NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot, jnxFabricFruOfflineReason, jnxFabricFruLastPowerOff, jnxFabricFruLastPowerOn } STATUS current DESCRIPTION "A jnxFabricFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis." ::= { jnxFabricChassisTraps 8 } jnxFabricFruFailed NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due toi some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced." ::= { jnxFabricChassisTraps 9 } jnxFabricFruOffline NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot, jnxFabricFruOfflineReason, jnxFabricFruLastPowerOff, jnxFabricFruLastPowerOn } STATUS current DESCRIPTION "A jnxFabricFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone offline in the chassis." ::= { jnxFabricChassisTraps 10 } jnxFabricFruOnline NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis." ::= { jnxFabricChassisTraps 11 } jnxFabricFruCheck NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis." ::= { jnxFabricChassisTraps 12 } jnxFabricFEBSwitchover NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricFEBSwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FEB (Forwarding Engine Board) has switched over." ::= { jnxFabricChassisTraps 13 } jnxFabricHardDiskFailed NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxHardDiskFailed trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has encountered some operational errors and gone into failed state in the chassis." ::= { jnxFabricChassisTraps 14 } jnxFabricHardDiskMissing NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A DiskMissing trap signifies that the SNMP entity, acting in an agent role, has detected that hard disk in the specified outing Engine is missing from boot device list." ::= { jnxFabricChassisTraps 15 } jnxFabricBootFromBackup NOTIFICATION-TYPE OBJECTS { jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxBootFromBackup trap signifies that the SNMP entity, acting in an agent role, has detected that the specified routing-engine/member has booted from the back up root partition" ::= { jnxFabricChassisTraps 16 } jnxFabricHighPower NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricHighPowerConsumption trap signifies that the SNMP entity, acting in an agent role, has detected that the specified fabric ASIC consumes more power than expected" ::= { jnxFabricChassisTraps 17 } -- Traps for chassis alarm cleared conditions jnxFabricPowerSupplyOK NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricContentsL3Index, jnxFabricContentsDescr, jnxFabricOperatingState } STATUS current DESCRIPTION "A jnxFabricPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition." ::= { jnxFabricChassisOKTraps 1 } jnxFabricFanOK NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricContentsL3Index, jnxFabricContentsDescr, jnxFabricOperatingState } STATUS current DESCRIPTION "A jnxFabricFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition." ::= { jnxFabricChassisOKTraps 2 } jnxFabricTemperatureOK NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricContentsL3Index, jnxFabricContentsDescr, jnxFabricOperatingTemp } STATUS current DESCRIPTION "A jnxFabricTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition." ::= { jnxFabricChassisOKTraps 3 } jnxFabricFruOK NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricFruContentsIndex, jnxFabricFruL1Index, jnxFabricFruL2Index, jnxFabricFruL3Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricFabricFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis." ::= { jnxFabricChassisOKTraps 4 } jnxFabricHighPowerCleared NOTIFICATION-TYPE OBJECTS { jnxFabricDeviceIndex, jnxFabricContentsContainerIndex, jnxFabricContentsL1Index, jnxFabricContentsL2Index, jnxFabricFruName, jnxFabricFruType, jnxFabricFruSlot } STATUS current DESCRIPTION "A jnxFabricHighPowerCleared trap signifies that the SNMP entity, acting in an agent role, has detected that the specified fabric ASIC has cleared its high power condition" ::= { jnxFabricChassisOKTraps 5 } END