-- ******************************************************************* -- Juniper enterprise specific QoS based Interface Accounting MIB. -- -- Copyright (c) 2001-2006, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- ******************************************************************* JUNIPER-IF-ACCOUNTING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64 FROM SNMPv2-SMI CounterBasedGauge64 FROM HCNUM-TC InterfaceIndex FROM IF-MIB JnxCosFcIdentifier FROM JUNIPER-COS-MIB ifJnx FROM JUNIPER-IF-MIB; jnxIfAccountingStats MODULE-IDENTITY LAST-UPDATED "201312250000Z" -- Wed Dec 25 12:00:00 2013 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO "Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "MIB module to define Forwarding Class based Interface statistics. The statistics will provide protocol specific statistics value which includes L2 overhead bytes. The mib is currently supported only on MX platforms." REVISION "201305151223Z" -- Wed May 25 12:23:51 2013 UTC DESCRIPTION "MIB module to define QoS based Interface accounting." REVISION "201312250000Z" -- Wed Dec 25 12:00:00 2013 UTC DESCRIPTION "MIB module extended to support inline accounting for Per Forwarding-class stats table for Aggregate (all types of traffic) pkt/byte counters & rate" ::= { ifJnx 10 } -- *************************************************************** -- Per Forwarding-class stats table -- *************************************************************** jnxIfFcAccountStatTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxIfFcAccountStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table presents the per forwarding-class and per protocol type statistics." ::= { jnxIfAccountingStats 1 } jnxIfFcAccountStatEntry OBJECT-TYPE SYNTAX JnxIfFcAccountStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table presents the per forwarding-class and per protocol type statistics. The indices of the table are Interface Index, Forwarding class Index and Protocol type" INDEX { jnxIfFcIfIndex, jnxIfFcFcIndex, jnxIfFcProtocol } ::= { jnxIfFcAccountStatTable 1 } JnxIfFcAccountStatEntry ::= SEQUENCE { jnxIfFcIfIndex InterfaceIndex, jnxIfFcFcIndex JnxCosFcIdentifier, jnxIfFcProtocol INTEGER, -- input packet/byte stats for unicast traffic jnxIfFcHCInUcastPkts Counter64, jnxIfFcHCInUcastOctets Counter64, -- output packet/byte stats for unicast traffic jnxIfFcHCOutUcastPkts Counter64, jnxIfFcHCOutUcastOctets Counter64, -- input packet/byte stats for multicast traffic jnxIfFcHCInMcastPkts Counter64, jnxIfFcHCInMcastOctets Counter64, -- output packet/byte stats for multicast traffic jnxIfFcHCOutMcastPkts Counter64, jnxIfFcHCOutMcastOctets Counter64 } jnxIfFcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface." ::= { jnxIfFcAccountStatEntry 1 } jnxIfFcFcIndex OBJECT-TYPE SYNTAX JnxCosFcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Forwarding Class Index of the interface." ::= { jnxIfFcAccountStatEntry 2 } --Protocol family for accounting all is aggregate of all types jnxIfFcProtocol OBJECT-TYPE SYNTAX INTEGER { all (1), ipv4 (2), ipv6 (3), mpls (4), layer2 (5), other (6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol type of the entry's traffic." ::= { jnxIfFcAccountStatEntry 3 } --input packet/byte stats for unicast traffic jnxIfFcHCInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast packets ingressed." ::= { jnxIfFcAccountStatEntry 4 } --input packet/byte stats for unicast traffic jnxIfFcHCInUcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast bytes ingressed." ::= { jnxIfFcAccountStatEntry 5 } --output packet/byte stats for unicast traffic jnxIfFcHCOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast packets egressed." ::= { jnxIfFcAccountStatEntry 6 } --output packet/byte stats for unicast traffic jnxIfFcHCOutUcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast bytes egressed." ::= { jnxIfFcAccountStatEntry 7 } --input packet/byte stats for multicast traffic jnxIfFcHCInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast packets ingressed." ::= { jnxIfFcAccountStatEntry 8 } --input packet/byte stats for multicast traffic jnxIfFcHCInMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast bytes ingressed." ::= { jnxIfFcAccountStatEntry 9 } --output packet/byte stats for multicast traffic jnxIfFcHCOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast packets egressed." ::= { jnxIfFcAccountStatEntry 10 } --output packet/byte stats for multicast traffic jnxIfFcHCOutMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast bytes egressed." ::= { jnxIfFcAccountStatEntry 11 } -- *************************************************************** -- Per Forwarding-class stats table for Aggregate(all types of traffic) pkt/byte counters & rate -- *************************************************************** jnxIfFcInlineAccountingStatTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxIfFcInlineAccountingStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table presents the per forwarding-class and per family statistics without considering the traffic types." ::= { jnxIfAccountingStats 2 } jnxIfFcInlineAccountingStatEntry OBJECT-TYPE SYNTAX JnxIfFcInlineAccountingStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table presents the per forwarding-class and per protocol type statistics. The indices of the table are Interface Index, Forwarding class Index and protocol(family) type as defined below." INDEX { jnxIfFcIfIndex, jnxIfFcFcIndex, jnxIfFcProtocol } ::= { jnxIfFcInlineAccountingStatTable 1 } JnxIfFcInlineAccountingStatEntry ::= SEQUENCE { -- Indices of the table jnxIfFcIfIndex InterfaceIndex, jnxIfFcFcIndex JnxCosFcIdentifier, jnxIfFcProtocol INTEGER, -- input packet & rate stats for all types of traffic jnxIfFcInlineHCInPkts Counter64, jnxIfFcInlineHCInPktsSecRate CounterBasedGauge64, -- input bytes & rate stats for all types of traffic jnxIfFcInlineHCInOctets Counter64, jnxIfFcInlineHCInOctetsSecRate CounterBasedGauge64, -- output packet & rate stats for all types of traffic jnxIfFcInlineHCOutPkts Counter64, jnxIfFcInlineHCOutPktsSecRate CounterBasedGauge64, -- output bytes & rate stats for all types of traffic jnxIfFcInlineHCOutOctets Counter64, jnxIfFcInlineHCOutOctetsSecRate CounterBasedGauge64 } --input packet stats for all types of traffic jnxIfFcInlineHCInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets ingressed." ::= { jnxIfFcInlineAccountingStatEntry 1 } --input packets per sec rate jnxIfFcInlineHCInPktsSecRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The packets rate ingressed per second." ::= { jnxIfFcInlineAccountingStatEntry 2 } --input byte stats for all types of traffic jnxIfFcInlineHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes ingressed." ::= { jnxIfFcInlineAccountingStatEntry 3 } --input bytes per sec for all types of traffic jnxIfFcInlineHCInOctetsSecRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The bytes rate ingressed per second." ::= { jnxIfFcInlineAccountingStatEntry 4 } --output packets stats for all types of traffic jnxIfFcInlineHCOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets egressed." ::= { jnxIfFcInlineAccountingStatEntry 5 } --output packets per sec for all types of traffic jnxIfFcInlineHCOutPktsSecRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The packets rate egressed per second." ::= { jnxIfFcInlineAccountingStatEntry 6 } --output byte stats for all types of traffic jnxIfFcInlineHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes egressed." ::= { jnxIfFcInlineAccountingStatEntry 7 } --output bytes per sec for all types of traffic jnxIfFcInlineHCOutOctetsSecRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The bytes rate egressed per second." ::= { jnxIfFcInlineAccountingStatEntry 8 } END