JUNIPER-L2CP-FEATURES-MIB DEFINITIONS ::= BEGIN

IMPORTS

    OBJECT-TYPE, MODULE-IDENTITY,
    NOTIFICATION-TYPE FROM SNMPv2-SMI
    DisplayString, TruthValue  FROM SNMPv2-TC
    InterfaceIndex, ifIndex  FROM IF-MIB
    dot1dStpPort, dot1dStpPortEntry  FROM BRIDGE-MIB
    jnxL2cpMibRoot FROM JUNIPER-SMI;

jnxL2cpFeaturesMIB MODULE-IDENTITY
    LAST-UPDATED "201609230000Z"
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
        "Juniper Technical Assistance Center
         Juniper Networks, Inc.
         1133 Innovation Way
         Sunnyvale, CA 94089
         E-mail: support@juniper.net"
    DESCRIPTION
        "This mib module is for Juniper Networks Proprietory
         Layer 2 control protocol (L2CP) features"

    REVISION     "201206250000Z"    -- June 25, 2012
    DESCRIPTION  "Modifying max access for LacpTimeOut trap objects."

    REVISION     "201208150000Z"    -- Aug 15, 2012
    DESCRIPTION  "Added new mib jnxLacpAggTimeout."

    REVISION     "201006110000Z"    -- June 11, 2010
    DESCRIPTION  "Added new trap jnxLacpTimeOut."

    REVISION     "201609230000Z"    -- Sep 23, 2016
    DESCRIPTION  "Adding  jnxL2cpLoopDetectObjects"

    ::= { jnxL2cpMibRoot 1 }


jnxL2cpObjects  OBJECT IDENTIFIER ::=  { jnxL2cpFeaturesMIB 1 }

jnxL2cpNotifications  OBJECT IDENTIFIER ::=  { jnxL2cpFeaturesMIB 2 }

jnxL2cpStpProtectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 1 }

jnxL2cpBpduProtectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 2 }

jnxDot1dStpPortProtectTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF JnxDot1dStpPortProtectEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines the jnxDot1dStp Port Table for providing enterprise specific
         extensions for Root Protect and Loop Protect to the corresponding 
         dot1dStpPortTable entry."
   ::= { jnxL2cpStpProtectObjects 1 }

jnxDot1dStpPortProtectEntry OBJECT-TYPE
    SYNTAX      JnxDot1dStpPortProtectEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the jnxDot1dStpPortProtectTable.  This essentially
         augments the dot1dStpPortTable with additional objects."
    AUGMENTS    { dot1dStpPortEntry }
    ::= { jnxDot1dStpPortProtectTable 1 }

JnxDot1dStpPortProtectEntry ::=
    SEQUENCE {
        jnxDot1dStpPortRootProtectEnabled  TruthValue,
        jnxDot1dStpPortRootProtectState    INTEGER,    
        jnxDot1dStpPortLoopProtectEnabled  TruthValue,
        jnxDot1dStpPortLoopProtectState    INTEGER    
    }

jnxDot1dStpPortRootProtectEnabled  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A Boolean value set by management indicating whether Root protect 
         functionality is enabled on the port. If TRUE causes the Port not
         to be selected as Root Port, even it has the best spanning tree 
         priority vector. This parameter should be FALSE by default. "
    ::= { jnxDot1dStpPortProtectEntry 1 }

jnxDot1dStpPortRootProtectState OBJECT-TYPE
    SYNTAX      INTEGER {
                    no-error (0),
                    root-prevented (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates whether the port was prevented from being a root port.
         This parameter will always return 'no-error (0)' if 
         jnxDot1dStpPortRootProtectEnabled is FALSE. "
    ::= { jnxDot1dStpPortProtectEntry 2 }

jnxDot1dStpPortLoopProtectEnabled  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A Boolean value set by management indicating whether Loop protect 
         functionality is enabled on the port. If TRUE causes the Port not
         to be selected as Designated Port when the received superior BPDU 
         is aged out. This parameter should be FALSE by default. "
    ::= { jnxDot1dStpPortProtectEntry 3 }

jnxDot1dStpPortLoopProtectState OBJECT-TYPE
    SYNTAX      INTEGER {
                    no-error (0),
                    loop-prevented (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates whether a potential Loop was prevented on the port
         This parameter will always return 'no-error (0)' if 
         jnxDot1dStpPortLoopProtectEnabled is FALSE. "
    ::= { jnxDot1dStpPortProtectEntry 4 }

jnxL2cpBpduProtectPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF JnxL2cpBpduProtectPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a Port Table for BPDU Protect information. This contains 
         only those ports on which BPDU Protect can be configured."
    ::= { jnxL2cpBpduProtectObjects 1 }

jnxL2cpBpduProtectPortEntry OBJECT-TYPE
    SYNTAX      JnxL2cpBpduProtectPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the jnxL2cpBpduProtectPortTable.  A list
         containing BPDU Protect information for each Port."
    INDEX  { ifIndex }
    ::= { jnxL2cpBpduProtectPortTable 1 }

JnxL2cpBpduProtectPortEntry ::=
    SEQUENCE {
        jnxL2cpBpduProtectPortEnabled  TruthValue,
        jnxL2cpPortBpduError           INTEGER
    }

jnxL2cpBpduProtectPortEnabled  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A Boolean value set by management indicating whether BPDU protect 
         functionality is enabled on the port. If TRUE causes the Port to be
         disabled (link down) upon receipt of a BPDU. This parameter should be
         FALSE by default. "
    ::= { jnxL2cpBpduProtectPortEntry 1 }

jnxL2cpPortBpduError OBJECT-TYPE
    SYNTAX      INTEGER {
                    no-error (0),
                    detected (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates whether a BPDU was received on the port.
         This parameter will always return 'no-error (0)' if 
         jnxL2cpBpduProtectPortEnabled is FALSE. "
    ::= { jnxL2cpBpduProtectPortEntry 2 }

jnxL2cpBpduProtectDisableTimeout OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Returns the value of time (in seconds) after which a port on
         which BPDU error was detected will be re-enabled. A returned
         value of 0 indicates that port will not be re-enabled 
         automatically."
    ::= { jnxL2cpBpduProtectObjects 2 }

jnxL2cpProtectTraps  OBJECT IDENTIFIER ::= { jnxL2cpNotifications 0 }

jnxPortRootProtectStateChangeTrap NOTIFICATION-TYPE
    OBJECTS {
        jnxDot1dStpPortRootProtectState
    }
    STATUS             current
    DESCRIPTION
        "Generated when the ports Root-protect state (no-error or root-prevented) 
         changes."
   ::= { jnxL2cpProtectTraps 1 }

jnxPortLoopProtectStateChangeTrap NOTIFICATION-TYPE
    OBJECTS {
        jnxDot1dStpPortLoopProtectState
    }
    STATUS             current
    DESCRIPTION
        "Generated when the ports Loop-protect state (no-error or loop-prevented) 
         changes."
   ::= { jnxL2cpProtectTraps 2 }

jnxPortBpduErrorStatusChangeTrap NOTIFICATION-TYPE
    OBJECTS {
        jnxL2cpPortBpduError
    }
    STATUS             current
    DESCRIPTION
        "Generated when the ports BPDU error state (no-error or detected) 
         changes."
   ::= { jnxL2cpProtectTraps 3 }

    -- ***************************************************************
    --  Lacp Traps / Notifications Section
    -- ***************************************************************

    -- Lacp Notification Variables/Objects

    jnxLacpNotifyVars OBJECT IDENTIFIER ::=  { jnxL2cpObjects 3 }

    jnxLacpAggTimeout OBJECT IDENTIFIER ::=  { jnxL2cpObjects 4 }

    jnxLacpNotificationsPrefix OBJECT IDENTIFIER ::= { jnxL2cpNotifications 1 }

LacpState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The Actor and Partner State values from the LACPDU."
    SYNTAX      BITS {
                    lacpActivity(0),
                    lacpTimeout(1),
                    aggregation(2),
                    synchronization(3),
                    collecting(4),
                    distributing(5),
                    defaulted(6),
                    expired(7)
                }

    jnxLacpInterfaceName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  accessible-for-notify
        STATUS      current
        DESCRIPTION
            "Lacp member interface."
        ::= { jnxLacpNotifyVars 1 }

    jnxLacpifIndex  OBJECT-TYPE 
        SYNTAX      InterfaceIndex 
        MAX-ACCESS  accessible-for-notify
        STATUS      current 
        DESCRIPTION 
            "Snmp ifIndex of member interface." 
        ::= { jnxLacpNotifyVars 2 } 

    jnxLacpAggregateInterfaceName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  accessible-for-notify
        STATUS      current
        DESCRIPTION
            "Lacp Aggregate interface."
        ::= { jnxLacpNotifyVars 3 }

    jnxLacpAggregateifIndex  OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  accessible-for-notify
        STATUS      current
        DESCRIPTION
            "Snmp ifIndex of Aggregator."
        ::= { jnxLacpNotifyVars 4 } 

    jnxLacpAggPortActorOperState OBJECT-TYPE
        SYNTAX       DisplayString
        MAX-ACCESS   accessible-for-notify
        STATUS       current
        DESCRIPTION
            "Port actor operational state."
        ::= { jnxLacpNotifyVars 5 }

    jnxLacpTimeOut NOTIFICATION-TYPE
        OBJECTS         { jnxLacpInterfaceName,
                          jnxLacpifIndex,
                          jnxLacpAggregateInterfaceName,
                          jnxLacpAggregateifIndex,
                          jnxLacpAggPortActorOperState
                        }
        STATUS          current
        DESCRIPTION
            "Lacp times out"
        ::= { jnxLacpNotificationsPrefix  1 }

dot3adAggPortTimeoutTable OBJECT-TYPE  
    SYNTAX      SEQUENCE OF Dot3adAggPortTimeoutEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains Link Aggregation Timeout information
        about a port that is associated with this device.
        A row appears in this table for each physical port."
    REFERENCE
        "IEEE 802.3"
    ::= { jnxLacpAggTimeout 1 }

dot3adAggPortTimeoutEntry OBJECT-TYPE
    SYNTAX      Dot3adAggPortTimeoutEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of Link Aggregation Control Protocol timeout information
        for a port on this device."
    INDEX { ifIndex }
    ::= { dot3adAggPortTimeoutTable 1 }
    
Dot3adAggPortTimeoutEntry ::=
    SEQUENCE {
        dot3adInterfaceName
            DisplayString,
        dot3adOperState
            LacpState,
        dot3adAggname
            DisplayString,
        dot3adInterfaceTimeout
            TimeTicks
    }

dot3adInterfaceName OBJECT-TYPE
    SYNTAX       DisplayString 
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Physical port that is associated with
        Aggregation Port. This value is read-only."
    REFERENCE
        "IEEE 802.3"
    ::= { dot3adAggPortTimeoutEntry 1 }

dot3adOperState OBJECT-TYPE
    SYNTAX       LacpState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A string of 8 bits, corresponding to the current
        operational values of Actor_State as transmitted by the
        Actor in LACPDUs. The bit allocations are as defined in
        30.7.2.1.20. This attribute value is read-only."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.2.1.21"
    ::= { dot3adAggPortTimeoutEntry 2 }

dot3adAggname OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Aggregation Port where Physical port 
        is associated with. This value is read-only."
    REFERENCE
        "IEEE 802.3"
    ::= { dot3adAggPortTimeoutEntry 3 }

dot3adInterfaceTimeout OBJECT-TYPE
    SYNTAX       TimeTicks
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This object represents the time elapsed in seconds
         since lacp experienced timeout.
         This value is read-only."
    REFERENCE
        "IEEE 802.3"
    ::= { dot3adAggPortTimeoutEntry 4 }

jnxL2cpLoopDetectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 5 }

jnxL2cpLoopDetectPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF JnxL2cpLoopDetectPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a Port Table for Loop Detect information. This contains
         only those ports on which Loop Detect is configured."
    ::= { jnxL2cpLoopDetectObjects 1 }

jnxL2cpLoopDetectPortEntry OBJECT-TYPE
    SYNTAX      JnxL2cpLoopDetectPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the jnxL2cpLoopDetectPortTable.  A list
         containing Loop Detect information for each Port."
    INDEX  { ifIndex }
    ::= { jnxL2cpLoopDetectPortTable 1 }

JnxL2cpLoopDetectPortEntry ::=
    SEQUENCE {
        jnxL2cpLoopDetectPortEnabled  TruthValue,
        jnxL2cpLoopDetectPduError INTEGER
    }

jnxL2cpLoopDetectPortEnabled  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A Boolean value set by management indicating whether Loop Detect
         functionality is enabled on the port. If TRUE causes the Port to be
         disabled (link down) upon receipt of a Loop Detect PDU. This parameter should be
         FALSE by default. "
    ::= { jnxL2cpLoopDetectPortEntry 1 }

jnxL2cpLoopDetectPduError OBJECT-TYPE
    SYNTAX      INTEGER {
                    no-error (0),
                    detected (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates whether a Loop Detect PDU was received on the port.
         This parameter will always return 'no-error (0)' if
         jnxL2cpLoopDetectPortEnabled is FALSE. "
    ::= { jnxL2cpLoopDetectPortEntry 2 }

END