-- -- Juniper Enterprise Specific MIB: Vlan -- -- Copyright (c) 2007-2011, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-VLAN-MIB DEFINITIONS ::= BEGIN IMPORTS Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI MacAddress, TruthValue, DisplayString FROM SNMPv2-TC InterfaceIndex FROM IF-MIB InetAddress, InetAddressType, InetAddressPrefixLength FROM INET-ADDRESS-MIB Unsigned32 FROM SNMPv2-SMI jnxExVlan FROM JUNIPER-EX-SMI; jnxVlanMIBObjects MODULE-IDENTITY LAST-UPDATED "200901090000Z" -- Fri Jan 09 00:00:00 2009 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO "Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "This module contains definitions for management information for pre-standards IEEE 802.1Q VLANs and their association with a Lan Emulation Client (lec). Devices implementing these pre-standards maintain port groupings and associated filters used to form a 'virtual bridge'." REVISION "200901090000Z" -- Fri Jan 09 00:00:00 2009 UTC DESCRIPTION "Marked the deprecated Objects of jnxVlanTable, jnxVlanInterfaceTable and jnxVlanPortGroupTable as Obsolete." REVISION "200901200000Z" -- Mon Jan 20 00:00:00 2009 UTC DESCRIPTION "Added new Object jnxExVlanTag to represent Vlan Tag information for each Vlan." REVISION "201009070000Z" -- Tue Sep 7 00:00:00 2010 UTC DESCRIPTION "Added new Objects jnxExVlanPortTagness and jnxExVlanPortAccessMode as part of jnxExVlanPortGroupTable." ::= { jnxExVlan 1 } -------------------------------------------------------------------------------- -- VLAN Configuration -------------------------------------------------------------------------------- jnxVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxVlanEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table of VLAN names and characteristics." ::= { jnxVlanMIBObjects 1 } jnxVlanEntry OBJECT-TYPE SYNTAX JnxVlanEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table entry containing VLAN names and characteristics." INDEX { IMPLIED jnxVlanName } ::= { jnxVlanTable 1 } JnxVlanEntry ::= SEQUENCE { jnxVlanName DisplayString, jnxVlanID Integer32, jnxVlanType INTEGER, jnxVlanPortGroupInstance Integer32, jnxVlanMacListInstance Integer32 } jnxVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Vlan name is the textual name and this is the identifier that the user of a configuration utility will use." ::= { jnxVlanEntry 1 } jnxVlanID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This is the locally significant ID that is used internally by this device to reference this VLAN." ::= { jnxVlanEntry 2 } jnxVlanType OBJECT-TYPE SYNTAX INTEGER { static (1), dynamic(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The valn type can be static (1) Dynamic(2)" DEFVAL { 1 } ::= { jnxVlanEntry 3 } jnxVlanPortGroupInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "jnxVlanPortGroupInstance is the index that identifies that the sub tree in the jnxVlanPortGroupTable helps to retrieve the group of ports in this VLAN." ::= { jnxVlanEntry 4 } jnxVlanMacListInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "jnxVlanMacListInstance is the index , if this is a MAC-based VLAN which identifies the sub tree to retrieve the list of MAC address to allow into this VLAN. If this is not a MAC-based VLAN then the value is 0" DEFVAL { 0 } ::= { jnxVlanEntry 5 } jnxVlanInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxVlanInterfaceEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table of VLAN names and characteristics in layer 3." ::= { jnxVlanMIBObjects 2 } jnxVlanInterfaceEntry OBJECT-TYPE SYNTAX JnxVlanInterfaceEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table entry containing VLAN names and characteristics in layer 3." INDEX { IMPLIED jnxVlanName } ::= { jnxVlanInterfaceTable 1 } JnxVlanInterfaceEntry ::= SEQUENCE { jnxVlanInterfaceIpAddress InetAddress, jnxVlanInterfaceProtocol InetAddressType, jnxVlanInterfaceSubNetMask IpAddress, jnxVlanInterfaceBroadcastAddress IpAddress, jnxVlanInterfaceDescription DisplayString, jnxVlanInterfaceAdminStatus TruthValue, jnxVlanInterfaceOperStatus DisplayString, jnxVlanSnmpIfIndex InterfaceIndex } jnxVlanInterfaceIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This specifies the IPAddress of this interface. " ::= { jnxVlanInterfaceEntry 1 } jnxVlanInterfaceProtocol OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This specifies the protocol for ipv4." ::= { jnxVlanInterfaceEntry 2 } jnxVlanInterfaceSubNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This specifies the subnet mask address of the vlan ." ::= { jnxVlanInterfaceEntry 3 } jnxVlanInterfaceBroadcastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This specifies the broadcast address of the vlan." ::= { jnxVlanInterfaceEntry 4 } jnxVlanInterfaceDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "jnxvlanInterfaceDescription provides the description for the vlan." ::= { jnxVlanInterfaceEntry 5 } jnxVlanInterfaceAdminStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This takes care of administration status of the vlan" ::= { jnxVlanInterfaceEntry 6 } jnxVlanInterfaceOperStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This specifies the operational status of the vlan" ::= { jnxVlanInterfaceEntry 7 } jnxVlanSnmpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This specifies the SNMP IF Index ." ::= { jnxVlanInterfaceEntry 8 } ------------------------------------------------------------------------------- -- Port Group Table -------------------------------------------------------------------------------- jnxVlanPortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxVlanPortGroupEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table of port groupings." ::= { jnxVlanMIBObjects 3 } jnxVlanPortGroupEntry OBJECT-TYPE SYNTAX JnxVlanPortGroupEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table entry containing a port number" INDEX { jnxVlanPortGroupIndex, jnxVlanPort } ::= { jnxVlanPortGroupTable 1 } JnxVlanPortGroupEntry ::= SEQUENCE { jnxVlanPortGroupIndex Integer32, jnxVlanPort Integer32, jnxVlanPortStatus INTEGER } jnxVlanPortGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index used so that there can be many different port groups" ::= { jnxVlanPortGroupEntry 1 } jnxVlanPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vlanPort specifies the port in the vlan.By adding a port here, that port will now be part of any VLAN(s) that this port group is associated with." ::= { jnxVlanPortGroupEntry 2 } jnxVlanPortStatus OBJECT-TYPE SYNTAX INTEGER { autoActive (1), allowed (2), allowedActive (3), allowedNotAvail (4), notAssociated (5) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The status of this port relative to the VLAN that points at this port group.[1.autoactive , 2.allowed, 3.allowedActive 4.allowedNotAvail, 5.notAssociated] autoActive : Means that the port is part of this VLAN because the switch automatically added it. allowed : Means that the port has been configured so that if all other criteria (if any) are met, this port is allowed to be in this VLAN. allowedActive : Means the same as allowed plus the fact that there is a device attached to this port and participating in the VLAN. allowedNotAvail: This value is only needed for devices that don't allow a port to be in more than one VLAN at a time. This value means that this port also exists in some other VLAN(s) and is active in another VLAN. Therefore this port is not available to be used in this VLAN. notAssociated : Means that the Port Group is not currently associated with any VLAN." DEFVAL { allowed } ::= { jnxVlanPortGroupEntry 3 } -------------------------------------------------------------------------------- -- MAC List Table -------------------------------------------------------------------------------- jnxVlanMacListTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxVlanMacListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "jnxVlanMacListTable is the table of MAC Lists. " ::= { jnxVlanMIBObjects 4 } jnxVlanMacListEntry OBJECT-TYPE SYNTAX JnxVlanMacListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing MAC Addresses" INDEX { jnxVlanMacListIndex } ::= { jnxVlanMacListTable 1 } JnxVlanMacListEntry ::= SEQUENCE { jnxVlanMacListIndex Integer32, jnxVlanMacAddress MacAddress } jnxVlanMacListIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "jnxVlanMacListIndex can be used beacuse there can be many different MAC Lists" ::= { jnxVlanMacListEntry 1 } jnxVlanMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "jnxVlanMacAddress is the MAC Address that belongs to this group." ::= { jnxVlanMacListEntry 2 } -------------------------------------------------------------------------------- -- Ex VLAN Configuration -------------------------------------------------------------------------------- jnxExVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxExVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of VLAN names and characteristics." ::= { jnxVlanMIBObjects 5 } jnxExVlanEntry OBJECT-TYPE SYNTAX JnxExVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing VLAN names and characteristics." INDEX { jnxExVlanID } ::= { jnxExVlanTable 1 } JnxExVlanEntry ::= SEQUENCE { jnxExVlanID Integer32, jnxExVlanName DisplayString, jnxExVlanType INTEGER, jnxExVlanPortGroupInstance Integer32, jnxExVlanTag Unsigned32 } jnxExVlanID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the locally significant ID that is used internally by this device to reference this VLAN." ::= { jnxExVlanEntry 1 } jnxExVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan name is the textual name." ::= { jnxExVlanEntry 2 } jnxExVlanType OBJECT-TYPE SYNTAX INTEGER { static (1), dynamic(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan type can be static (1) Dynamic(2)" DEFVAL { 1 } ::= { jnxExVlanEntry 3 } jnxExVlanPortGroupInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "jnxExVlanPortGroupInstance is the index that identifies that the sub tree in the jnxVlanPortGroupTable helps to retrieve the group of ports in this VLAN." ::= { jnxExVlanEntry 4 } jnxExVlanTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "jnxExVlanTag gives the Vlan Tag details for each Vlan." ::= { jnxExVlanEntry 5 } -------------------------------------------------------------------------------- -- Ex VLAN Interface Table -------------------------------------------------------------------------------- jnxExVlanInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxExVlanInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of VLAN names and characteristics in layer 3." ::= { jnxVlanMIBObjects 6 } jnxExVlanInterfaceEntry OBJECT-TYPE SYNTAX JnxExVlanInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing VLAN names and characteristics in layer 3." INDEX { jnxExVlanID } ::= { jnxExVlanInterfaceTable 1 } JnxExVlanInterfaceEntry ::= SEQUENCE { jnxExVlanInterfaceProtocol InetAddressType, jnxExVlanInterfaceIpAddress InetAddress, jnxExVlanInterfacePrefixLength InetAddressPrefixLength, jnxExVlanInterfaceBroadcastAddress InetAddress, jnxExVlanInterfaceDescription DisplayString, jnxExVlanInterfaceAdminStatus INTEGER, jnxExVlanInterfaceOperStatus INTEGER, jnxExVlanSnmpIfIndex InterfaceIndex } jnxExVlanInterfaceProtocol OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the protocol for ipv4." ::= { jnxExVlanInterfaceEntry 1 } jnxExVlanInterfaceIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the IPAddress of this interface. " ::= { jnxExVlanInterfaceEntry 2 } jnxExVlanInterfacePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the length of subnet mask address of the vlan ." ::= { jnxExVlanInterfaceEntry 3 } jnxExVlanInterfaceBroadcastAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the broadcast address of the vlan." ::= { jnxExVlanInterfaceEntry 4 } jnxExVlanInterfaceDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "jnxExvlanInterfaceDescription provides the description for the vlan." ::= { jnxExVlanInterfaceEntry 5 } jnxExVlanInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This takes care of administration status of the vlan" ::= { jnxExVlanInterfaceEntry 6 } jnxExVlanInterfaceOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the operational status of the vlan" ::= { jnxExVlanInterfaceEntry 7 } jnxExVlanSnmpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the SNMP IF Index ." ::= { jnxExVlanInterfaceEntry 8 } ------------------------------------------------------------------------------- -- Ex Port Group Table -------------------------------------------------------------------------------- jnxExVlanPortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxExVlanPortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of port groupings." ::= { jnxVlanMIBObjects 7 } jnxExVlanPortGroupEntry OBJECT-TYPE SYNTAX JnxExVlanPortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing a port number" INDEX { jnxExVlanPortGroupIndex, jnxExVlanPort } ::= { jnxExVlanPortGroupTable 1 } JnxExVlanPortGroupEntry ::= SEQUENCE { jnxExVlanPortGroupIndex Integer32, jnxExVlanPort Integer32, jnxExVlanPortStatus INTEGER, jnxExVlanPortTagness INTEGER, jnxExVlanPortAccessMode INTEGER } jnxExVlanPortGroupIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used so that there can be many different port groups" ::= { jnxExVlanPortGroupEntry 1 } jnxExVlanPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlanPort specifies the port in the vlan.By adding a port here, that port will now be part of any VLAN(s) that this port group is associated with." ::= { jnxExVlanPortGroupEntry 2 } jnxExVlanPortStatus OBJECT-TYPE SYNTAX INTEGER { autoActive (1), allowed (2), allowedActive (3), allowedNotAvail (4), notAssociated (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this port relative to the VLAN that points at this port group.[1.autoactive , 2.allowed, 3.allowedActive 4.allowedNotAvail, 5.notAssociated] autoActive : Means that the port is part of this VLAN because the switch automatically added it. allowed : Means that the port has been configured so that if all other criteria (if any) are met, this port is allowed to be in this VLAN. allowedActive : Means the same as allowed plus the fact that there is a device attached to this port and participating in the VLAN. allowedNotAvail: This value is only needed for devices that don't allow a port to be in more than one VLAN at a time. This value means that this port also exists in some other VLAN(s) and is active in another VLAN. Therefore this port is not available to be used in this VLAN. notAssociated : Means that the Port Group is not currently associated with any VLAN." DEFVAL { allowed } ::= { jnxExVlanPortGroupEntry 3 } jnxExVlanPortTagness OBJECT-TYPE SYNTAX INTEGER { tagged (1), untagged (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VlanPortTaqness gives whether the Port is tagged or untagged." ::= { jnxExVlanPortGroupEntry 4 } jnxExVlanPortAccessMode OBJECT-TYPE SYNTAX INTEGER { access (1), trunk (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VlanPortAccessMode gives whether the Port is Access or Trunk." ::= { jnxExVlanPortGroupEntry 5 } END