-- ***************************************************************************** -- Juniper-ACCOUNTING-MIB -- -- Juniper Networks Enterprise MIB -- Accounting MIB -- -- Copyright (c) 1999 Redstone Communications, Inc. -- Copyright (c) 1999, 2002 Unisphere Networks, Inc. -- Copyright (c) 2002, 2003 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-ACCOUNTING-MIB DEFINITIONS ::= BEGIN IMPORTS Integer32, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, DisplayString FROM SNMPv2-TC InterfaceIndex FROM IF-MIB acctngSelectionEntry, acctngSelectionIndex, acctngFileEntry FROM ACCOUNTING-CONTROL-MIB juniMibs FROM Juniper-MIBs juniIfType FROM Juniper-UNI-IF-MIB JuniAcctngOperType, JuniAcctngAdminType, JuniInterfaceDescrFormat, JuniInterfaceLocation, JuniEnable FROM Juniper-TC JuniPolicyAttachmentType FROM Juniper-POLICY-MIB; juniAcctngMIB MODULE-IDENTITY LAST-UPDATED "200907161500Z" -- 16-Jul-09 10:0 AM EST ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "The accounting MIB for the Juniper Networks enterprise. This MIB augments with the Virtual Router Accounting MIB specified in RLI618." -- Revision History REVISION "200907161500Z" -- 16-Jul-09 10:0 AM EST - JUNOSe 11.0 DESCRIPTION "Added Qos Schema IDs" REVISION "200504261500Z" -- 26-Apr-05 10:00 AM EST - JUNOSe 7.1 DESCRIPTION "Key revisions include: o Added Virtual Router Based Accounting Config (RLI618)" REVISION "200302281500Z" -- 28-Feb-03 10:00 AM EST - JUNOSe 5.1 DESCRIPTION "Added IGMP schema IDs." REVISION "200212171537Z" -- 17-Dec-02 10:37 AM EST - JUNOSe 5.0 DESCRIPTION "Key revisions include: o Replaced Unisphere names with Juniper names. o Added juniAcctngInterfaceDescrFormat, juniAcctngInterfaceNumberingMode and juniAcctngFileFormat. o Changed the indexing scheme to the juniAcctngInterfaceTable to allow specification by interface type, fileIndex and interface location. Gave the table a new OID." REVISION "200112051416Z" -- 05-Dec-01 09:16 AM EST - JUNOSe 4.0 DESCRIPTION "Key revisions include: o Added juniAcctngSelectionPolicyName and juniAcctngSelectionPolicyType objects to juniAcctngSelectionTable o Added juniAcctngSelectionSchemaPolicy and associated policy statistic OIDs " REVISION "200111191900Z" -- 19-Nov-01 02:00 PM EST - JUNOSe 3.3 DESCRIPTION "Key revisions include: o Added juniAcctngifInMulticastPkts o Added juniAcctngifInBroadcastPkts o Added juniAcctngifOutMulticastPkts o Added juniAcctngifOutBroadcastPkts " REVISION "200103261322Z" -- 26-Mar-01 08:22 AM EST - JUNOSe 3.2 DESCRIPTION "Key revisions include: o Added juniAcctngSelectionSchemaSystem o Deprecated juniAcctngSelectionSubtreeType " REVISION "200011071900Z" -- 07-Nov-00 03:00 PM EDT - JUNOSe 2.6 DESCRIPTION "Key revisions include: o Added juniAcctngIfTimeOffset " REVISION "200007210000Z" -- 21-Jul-00 - JUNOSe 2.2 DESCRIPTION "Key revisions include: o Added juniAcctngIfCorrelator o Added juniAcctngIfInPolicedOctets o Added juniAcctngIfInPolicedPkts o Added juniAcctngIfInSpoofedPkts o Added juniAcctngIfOutPolicedOctets o Added juniAcctngIfOutPolicedPkts o Added juniAcctngIfOutSchedulerDropOctets o Added juniAcctngIfOutSchedulerDropPkts o Added juniAcctngIfLowerInterface " REVISION "200003200000Z" -- 20-Mar-00 - JUNOSe 2.0 DESCRIPTION "Key revisions include: o Moved juniAcctngSelectionMaxIfStackLevels o Added juniAcctngSelectionSubtreeType o Added juniAcctngIfCorrelator o Removed juniAcctngSelectionSchemaPpp " REVISION "200001170000Z" -- 17-Jan-00 - JUNOSe 1.3 DESCRIPTION "Key revisions include: o Added juniAcctngSelectionMaxIfStackLevels o Added juniAcctngSelectionIfStackStartTable o Added juniAcctngSelectionSchemaIfStack " REVISION "9910180000Z" -- 18-Oct-99 - JUNOSe 1.1 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 24 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- MIB Structure -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniAcctngMIBObjects OBJECT IDENTIFIER ::= { juniAcctngMIB 1 } juniAcctngSelectionControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 1 } juniAcctngFileControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 2 } juniAcctngInterfaceControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 3 } juniAcctngScalarGroup OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 4 } juniAcctngVirtualRouterControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 5 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- MIB Objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- -- The Juniper Accounting Scalar Group -- juniAcctngInterfaceDescrFormat OBJECT-TYPE SYNTAX JuniInterfaceDescrFormat MAX-ACCESS read-write STATUS current DESCRIPTION "The format of the interface descriptions reported by the accounting application." ::= { juniAcctngScalarGroup 1 } juniAcctngInterfaceNumberingMode OBJECT-TYPE SYNTAX INTEGER { proprietaryNumbering(0), rfc1213Number(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The format of the interface descriptions reported by the accounting application." ::= { juniAcctngScalarGroup 2 } juniAcctngFileFormat OBJECT-TYPE SYNTAX INTEGER { includeCR(0), includeCRLF(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The file format of the accounting file." ::= { juniAcctngScalarGroup 3 } -- -- The Accounting Information Selection table -- juniAcctngSelectionTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAcctngSelectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of accounting information selection entries. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection." ::= { juniAcctngSelectionControl 1 } juniAcctngSelectionEntry OBJECT-TYPE SYNTAX JuniAcctngSelectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry used to extend the the selection entry in acctngSelectionEntry. This conceptual row extension is used for Juniper accounting extensions for connectionless data collection." AUGMENTS { acctngSelectionEntry } ::= { juniAcctngSelectionTable 1 } JuniAcctngSelectionEntry ::= SEQUENCE { juniAcctngSelectionType BITS, juniAcctngSelectionMode INTEGER, juniAcctngSelectionSubtreeType INTEGER, juniAcctngSelectionMaxIfStackLevels Integer32, juniAcctngSelectionPolicyName DisplayString, juniAcctngSelectionPolicyType JuniPolicyAttachmentType, juniAcctngSelectionIfCreateDeleteStats JuniEnable, juniAcctngSelectionIfCreateDeleteStatsIfTypes BITS } juniAcctngSelectionType OBJECT-TYPE SYNTAX BITS { ietfAccountControl(0), connectionLessLayer2(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the types of connections for which the information selected by this entry are to be collected. The ietfAccountControl(0) bit position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType in the base conceptual row determines the selection type. All other bit positions for this object over-ride the acctngSelectionType in the base conceptual row. When the value of this object over-rides the acctngSelectionType object, the following objects have no meaning: ACCOUNTING-CONTROL-MIB.acctngFileCollectFailedAttempts ACCOUNTING-CONTROL-MIB.acctngFileMinAge because they control or are related to connection oriented accounting." ::= { juniAcctngSelectionEntry 1 } juniAcctngSelectionMode OBJECT-TYPE SYNTAX INTEGER { absoluteCounterValues(1), deltaCounterValues(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the data collection mode." DEFVAL { deltaCounterValues } ::= { juniAcctngSelectionEntry 2 } juniAcctngSelectionSubtreeType OBJECT-TYPE SYNTAX INTEGER { unknown(0), lineCard(1), systemController(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates the origin of the collection, given the row's subtree. The architecture implementation for statistics collection imposes that rows with distinct juniAcctngSelectionSubtreeType may not be collected into the same accounting file. Conversely, different files (configured from acctngSelectionFile) entries are necessary in order to collect from subtrees (configured from acctngSelectionSubtree) that imply into different subtree types (juniAcctngSelectionSubtreeType)." ::= { juniAcctngSelectionEntry 3 } juniAcctngSelectionMaxIfStackLevels OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the maximum number of levels in the ifStack table to be returned when using the ifStack accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaIfStack. When this object is zero, the entire stack above the starting point(s) given will be returned. When this object is set to 1, only ifIndexes stacked above the starting point(s) given will be returned." DEFVAL { 0 } ::= { juniAcctngSelectionEntry 4 } juniAcctngSelectionPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the name of the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPolicy." DEFVAL { "" } ::= { juniAcctngSelectionEntry 5 } juniAcctngSelectionPolicyType OBJECT-TYPE SYNTAX JuniPolicyAttachmentType MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the attachment point for the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPolicy." DEFVAL { noPolicy } ::= { juniAcctngSelectionEntry 6 } juniAcctngSelectionIfCreateDeleteStats OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable interfaces create and delete statistics collection." DEFVAL { disable } ::= { juniAcctngSelectionEntry 7 } juniAcctngSelectionIfCreateDeleteStatsIfTypes OBJECT-TYPE SYNTAX BITS { ip(0), ppp(1), atm1483(2), vlan(3), mplsMajor(4), mplsL2Shim(5), mplsMinor(6)} MAX-ACCESS read-write STATUS current DESCRIPTION "The interface-types that are used in the configuration of the create/delete statistics collection. Allowed interface-types are IP, ATM1483, PPP and VLAN. These interface-types are allowed to configure if the interfaces create/delete stats feature is enabled i.e juniAcctngSelectionIfCreateDeleteStats == enable." ::= { juniAcctngSelectionEntry 8 } -- -- The Accounting Information ifStack Selection -- juniAcctngSelectionIfStackStartTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAcctngSelectionIfStackStartEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ifIndexes to be used as starting point when using the ifStack selection schema. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection." ::= { juniAcctngSelectionControl 3 } juniAcctngSelectionIfStackStartEntry OBJECT-TYPE SYNTAX JuniAcctngSelectionIfStackStartEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry used to determine the starting point entry when using the ifStack schema." INDEX { acctngSelectionIndex, juniAcctngSelectionIfStackIfIndex } ::= { juniAcctngSelectionIfStackStartTable 1 } JuniAcctngSelectionIfStackStartEntry ::= SEQUENCE { juniAcctngSelectionIfStackIfIndex InterfaceIndex, juniAcctngSelectionIfStackRowStatus RowStatus } juniAcctngSelectionIfStackIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex to be used as a starting point in the interface stack configuration. The interfaces to be returned in the ifStack schema will start from this value, going up." ::= { juniAcctngSelectionIfStackStartEntry 1 } juniAcctngSelectionIfStackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table." ::= { juniAcctngSelectionIfStackStartEntry 2 } -- -- The Accounting File Table -- juniAcctngFileTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAcctngFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value identifying the file transfer behavior and the the file to where accounting data is to be stored." ::= { juniAcctngFileControl 1 } juniAcctngFileEntry OBJECT-TYPE SYNTAX JuniAcctngFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry used to extend the file management of acctngFileEntry. This conceptual row extension is used for Juniper accounting extensions to automate the transfer of accounting data to remote hosts." AUGMENTS { acctngFileEntry } ::= { juniAcctngFileTable 1 } JuniAcctngFileEntry ::= SEQUENCE { juniAcctngFileXferMode INTEGER, juniAcctngFileXferIndex INTEGER, juniAcctngFileXferSecondaryIndex INTEGER } juniAcctngFileXferMode OBJECT-TYPE SYNTAX INTEGER { juniAcctngManualTransfer(1), juniAcctngAutomatedTransfer(2), juniAcctngTransferOnFileFull(3), juniAcctngRedundantTransfer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mode to use for transfering accounting data to remote client. juniAcctngManualTransfer - Administrator is responsible for manually transfering collected accounting data off of the system. juniAcctngAutomatedTransfer - The agent will automatically transfer the collected accounting data based at a acctngFileIntervals using an entry in the juniFileXferTable pointed to by juniAcctngFileXferIndex. If a manager sets this object to this value, a corresponding row in the juniFileXferTable must exist, otherwise the set command will fail. juniActngTransferOnFileFull - The agent will automatically transfer the collected accounting data when the file reaches the maximum size defined by acctngFileMaximumSize. If a manager sets this object to this value, a corresponding row in the juniFileXferTable must exist, otherwise the set command will fail. juniAcctngRedundantTransfer - The agent will automatically transfer two copies of the accounting data based on the acctngFileInterval. One copy will go to the juniFileXferTable entry identified by juniAcctngFileXferIndex and one copy will go the the juniFileXferTable entry identified by juniAcctngFileXferSecondaryIndex." ::= { juniAcctngFileEntry 1 } juniAcctngFileXferIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies an entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the juniFileXferTable does not exist or it is not set to juniFileXferAcctngStatistics." ::= { juniAcctngFileEntry 2 } juniAcctngFileXferSecondaryIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies a backup or secondary entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the juniFileXferTable does not exist or it is not set to juniFileXferAcctngStatistics." ::= { juniAcctngFileEntry 3 } -- -- Obsolete Per-interface Type Control Table -- This table was obsoleted when the indexing changed. -- juniAcctngObsInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAcctngObsInterfaceEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This table was obsoleted when the indexing changed." ::= { juniAcctngInterfaceControl 1 } juniAcctngObsInterfaceEntry OBJECT-TYPE SYNTAX JuniAcctngObsInterfaceEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Obsolete table entry." INDEX { juniIfType } ::= { juniAcctngObsInterfaceTable 1 } JuniAcctngObsInterfaceEntry ::= SEQUENCE { juniAcctngObsInterfaceAdminStatus JuniAcctngAdminType, juniAcctngObsInterfaceOperStatus JuniAcctngOperType, juniAcctngObsInterfaceRowStatus RowStatus, juniAcctngObsInterfaceAccntgFileIndex Integer32 } juniAcctngObsInterfaceAdminStatus OBJECT-TYPE SYNTAX JuniAcctngAdminType MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Obsolete object." ::= { juniAcctngObsInterfaceEntry 1 } juniAcctngObsInterfaceOperStatus OBJECT-TYPE SYNTAX JuniAcctngOperType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete object." ::= { juniAcctngObsInterfaceEntry 2 } juniAcctngObsInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Obsolete object." ::= { juniAcctngObsInterfaceEntry 3 } juniAcctngObsInterfaceAccntgFileIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Obsolete object." ::= { juniAcctngObsInterfaceEntry 4 } -- -- Per-interface Type Control Table -- juniAcctngInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAcctngInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table controlling the collection of accounting data on specific interfaces types. This table provides an efficient mechanism to enable and/or disable data collection on all interfaces of a specified type. This table replaces the obsolete version with the same name." ::= { juniAcctngInterfaceControl 2 } juniAcctngInterfaceEntry OBJECT-TYPE SYNTAX JuniAcctngInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry which controls whether accounting data is to be collected on interfaces of a specific type, to a specific accounting file and by the systems interface location." INDEX { juniIfType, juniAcctngInterfaceFileIndex, juniAcctngInterfaceLocation } ::= { juniAcctngInterfaceTable 1 } JuniAcctngInterfaceEntry ::= SEQUENCE { juniAcctngInterfaceFileIndex Integer32, juniAcctngInterfaceLocation JuniInterfaceLocation, juniAcctngInterfaceAdminStatus JuniAcctngAdminType, juniAcctngInterfaceOperStatus JuniAcctngOperType, juniAcctngInterfaceRowStatus RowStatus } juniAcctngInterfaceFileIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object selects the acctngFileTable entry for the collection statistics for this interface type. The value of this object is the same as the acctngFileIndex and is used to cross reference accounting data files in the AcctngFileTable. If the value of this object is zero (special value), then the combined interface type/location defined by this entry is collected into all entries in the acctngFileTable, i.e., all accounting files." ::= { juniAcctngInterfaceEntry 1 } juniAcctngInterfaceLocation OBJECT-TYPE SYNTAX JuniInterfaceLocation MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface location specification for this entry. If the value of this entry is a zero length string, then all system locations are included for the interface type defined by juniIfType." ::= { juniAcctngInterfaceEntry 2 } juniAcctngInterfaceAdminStatus OBJECT-TYPE SYNTAX JuniAcctngAdminType MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for accounting data collection for interfaces defined by the type of this entry. The administrative scope is for all interfaces of the type defined by the corresponding juniIfType for this entry." ::= { juniAcctngInterfaceEntry 3 } juniAcctngInterfaceOperStatus OBJECT-TYPE SYNTAX JuniAcctngOperType MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for accounting data collection on for all interfaces corresponding to this entries type." ::= { juniAcctngInterfaceEntry 4 } juniAcctngInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table." ::= { juniAcctngInterfaceEntry 5 } -- -- Per-slot interface final stats transfer statistics Table -- juniAcctngIfFinalStatsXferStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAcctngIfFinalStatsXferStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to display line cards interfaces final statistics transfer statistics." ::= { juniAcctngInterfaceControl 3 } juniAcctngIfFinalStatsXferStatsEntry OBJECT-TYPE SYNTAX JuniAcctngIfFinalStatsXferStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is a display of one line card's interfaces final statistics transfer statistics." INDEX { juniAcctngIfFinalStatsXferStatsSlotNumber } ::= { juniAcctngIfFinalStatsXferStatsTable 1 } JuniAcctngIfFinalStatsXferStatsEntry ::= SEQUENCE { juniAcctngIfFinalStatsXferStatsSlotNumber Integer32, juniAcctngIfFinalStatsXferStatsReceived Unsigned32, juniAcctngIfFinalStatsXferStatsTransferred Unsigned32, juniAcctngIfFinalStatsXferStatsDropped Unsigned32 } juniAcctngIfFinalStatsXferStatsSlotNumber OBJECT-TYPE SYNTAX Integer32 (0..14) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object selects the slot number to display interfaces final statistics transfer statistics for the line module on that slot." ::= { juniAcctngIfFinalStatsXferStatsEntry 1 } juniAcctngIfFinalStatsXferStatsReceived OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total received interfaces final statistics records for the line module." ::= { juniAcctngIfFinalStatsXferStatsEntry 2 } juniAcctngIfFinalStatsXferStatsTransferred OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total transferred interfaces final statistics records for the line module." ::= { juniAcctngIfFinalStatsXferStatsEntry 3 } juniAcctngIfFinalStatsXferStatsDropped OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total dropped interfaces final statistics records for the line module." ::= { juniAcctngIfFinalStatsXferStatsEntry 4 } -- -- The Virtual Router Accounting Control Information -- juniAcctngVirtualRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAcctngVirtualRouterTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table stores the configuration of Virtual Routers per collector (File Index) basis. Multiple Virtual Routers can be configured per collector (file index)" ::= { juniAcctngVirtualRouterControl 1 } juniAcctngVirtualRouterTableEntry OBJECT-TYPE SYNTAX JuniAcctngVirtualRouterTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry used to determine the starting point entry when using the ifStack schema." INDEX { juniAcctngVirtualRouterTableIndex } ::= { juniAcctngVirtualRouterTable 1 } JuniAcctngVirtualRouterTableEntry ::= SEQUENCE { juniAcctngVirtualRouterTableIndex Integer32, juniAcctngVirtualRouterTableVRName DisplayString, juniAcctngVirtualRouterTableRowStatus RowStatus } juniAcctngVirtualRouterTableIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This Index to be used as a starting point in the Virtual Router Table configuration. The index to be returned in the Virtual Router Table will start from this value, going up." ::= { juniAcctngVirtualRouterTableEntry 1 } juniAcctngVirtualRouterTableVRName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Virtual Router name(s) space separated." ::= { juniAcctngVirtualRouterTableEntry 2 } juniAcctngVirtualRouterTableRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table." ::= { juniAcctngVirtualRouterTableEntry 3 } -- -- enterprise schema information -- juniAcctngSelectionSchema OBJECT-IDENTITY STATUS current DESCRIPTION "The root OBJECT IDENTIFIER under which accounting selection tree objects are assigned." ::= { juniAcctngMIB 2 } juniAcctngSelectionSchemaIf OBJECT IDENTIFIER ::= { juniAcctngSelectionSchema 1 } juniAcctngIfInOctets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 1 } juniAcctngIfInUcastPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 2 } juniAcctngIfInDiscards OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 3 } juniAcctngIfInErrors OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 4 } juniAcctngIfInUnknownProtos OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 5 } juniAcctngIfOutOctets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 6 } juniAcctngIfOutUcastPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 7 } juniAcctngIfOutDiscards OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 8 } juniAcctngIfOutErrors OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 9 } juniAcctngIfCorrelator OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 10 } juniAcctngIfInPolicedOctets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 11 } juniAcctngIfInPolicedPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 12 } juniAcctngIfInSpoofedPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 13 } juniAcctngIfOutPolicedOctets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 14 } juniAcctngIfOutPolicedPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 15 } juniAcctngIfOutSchedulerDropOctets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 16 } juniAcctngIfOutSchedulerDropPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 17 } juniAcctngIfLowerInterface OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 18 } juniAcctngIfTimeOffset OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 19 } juniAcctngifInMulticastPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 20 } juniAcctngifInBroadcastPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 21 } juniAcctngifOutMulticastPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 22 } juniAcctngifOutBroadcastPkts OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIf 23 } juniAcctngSelectionSchemaIfStack OBJECT IDENTIFIER ::= { juniAcctngSelectionSchema 3 } juniAcctngSelectionSchemaSystem OBJECT IDENTIFIER ::= { juniAcctngSelectionSchema 4 } juniAcctngSelectionSchemaPolicy OBJECT IDENTIFIER ::= { juniAcctngSelectionSchema 5 } juniAcctngSelectionSchemaIgmp OBJECT IDENTIFIER ::= { juniAcctngSelectionSchema 6 } juniAcctngSelectionSchemaQos OBJECT IDENTIFIER ::= { juniAcctngSelectionSchema 7 } juniAcctngGreenPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 1 } juniAcctngUpperGreenPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 2 } juniAcctngYellowPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 3 } juniAcctngUpperYellowPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 4 } juniAcctngRedPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 5 } juniAcctngUpperRedPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 6 } juniAcctngGreenBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 7 } juniAcctngUpperGreenBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 8 } juniAcctngYellowBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 9 } juniAcctngUpperYellowBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 10 } juniAcctngRedBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 11 } juniAcctngUpperRedBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaPolicy 12 } juniAcctngIgmpLowerIndex OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIgmp 1 } juniAcctngIgmpRouterIndex OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIgmp 2 } juniAcctngIgmpDestAddr OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIgmp 3 } juniAcctngIgmpSourceIndex OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIgmp 4 } juniAcctngIgmpMulticastGroup OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIgmp 5 } juniAcctngIgmpLowerIgmpCommand OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIgmp 6 } juniAcctngIgmpLowerTimeStamp OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaIgmp 7 } juniAcctngParentShapingRate OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 1 } juniAcctngParentSharedShapRate OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 2 } juniAcctngParentChildWeight OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 3 } juniAcctngQueueLength OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 4 } juniAcctngForwardedRate OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 5 } juniAcctngAggDropRate OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 6 } juniAcctngForwardedPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 7 } juniAcctngForwardedBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 8 } juniAcctngGreenDropPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 9 } juniAcctngGreenDropBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 10 } juniAcctngYellowDropPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 11 } juniAcctngYellowDropBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 12 } juniAcctngRedDropPackets OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 13 } juniAcctngRedDropBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 14 } juniAcctngDropProfile OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 15 } juniAcctngQueueProfile OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 16 } juniAcctngSchedulerProfile OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 17 } juniAcctngStatisticsProfile OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 18 } juniAcctngShapingMode OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 19 } juniAcctngShapingRate OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 20 } juniAcctngBurst OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 21 } juniAcctngAssuredRate OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 22 } juniAcctngWeight OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 23 } juniAcctngRedEnabled OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 24 } juniAcctngSharedShapingMode OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 25 } juniAcctngSharedShapingRate OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 26 } juniAcctngByteAdjType OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 27 } juniAcctngByteAdjBytes OBJECT IDENTIFIER ::= { juniAcctngSelectionSchemaQos 28 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniAcctngConformance OBJECT IDENTIFIER ::= { juniAcctngMIB 3 } juniAcctngGroups OBJECT IDENTIFIER ::= { juniAcctngConformance 1 } juniAcctngCompliances OBJECT IDENTIFIER ::= { juniAcctngConformance 2 } -- -- compliance statements -- juniAcctngCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the juniAcctngSelectionSubtreeType object was deprecated." MODULE -- this module MANDATORY-GROUPS { juniAcctngBasicGroup } ::= { juniAcctngCompliances 1 } -- JUNOSe 2.0 juniAcctngCompliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when selection policy name and type objects were added." MODULE -- this module MANDATORY-GROUPS { juniAcctngBasicGroup2 } ::= { juniAcctngCompliances 2 } -- JUNOSe 3.2 juniAcctngCompliance3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the interface control table was modified." MODULE -- this module MANDATORY-GROUPS { juniAcctngBasicGroup3 } ::= { juniAcctngCompliances 3 } -- JUNOSe 4.0 juniAcctngCompliance4 MODULE-COMPLIANCE STATUS current DESCRIPTION "Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the selection control table was modified." MODULE -- this module MANDATORY-GROUPS { juniAcctngBasicGroup4 } ::= { juniAcctngCompliances 4 } -- JUNOSe 5.0 juniAcctngCompliance5 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for switches that implement the Juniper Accounting Control MIB." MODULE -- this module MANDATORY-GROUPS { juniAcctngBasicGroup5 } ::= { juniAcctngCompliances 5 } -- JUNOSe x.0 juniAcctngCompliance6 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for switches that implement the Juniper Accounting Control MIB." MODULE -- this module MANDATORY-GROUPS { juniAcctngBasicGroup6 } ::= { juniAcctngCompliances 6 } -- JUNOSe 7.1 -- -- units of conformance -- juniAcctngBasicGroup OBJECT-GROUP OBJECTS { juniAcctngSelectionType, juniAcctngSelectionMode, juniAcctngSelectionSubtreeType, juniAcctngSelectionMaxIfStackLevels, juniAcctngSelectionIfStackRowStatus, juniAcctngFileXferMode, juniAcctngFileXferIndex, juniAcctngFileXferSecondaryIndex, juniAcctngObsInterfaceAdminStatus, juniAcctngObsInterfaceOperStatus, juniAcctngObsInterfaceRowStatus, juniAcctngObsInterfaceAccntgFileIndex } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when juniAcctngSelectionSubtreeType was deprecated." ::= { juniAcctngGroups 1 } juniAcctngBasicGroup2 OBJECT-GROUP OBJECTS { juniAcctngSelectionType, juniAcctngSelectionMode, juniAcctngSelectionMaxIfStackLevels, juniAcctngSelectionIfStackRowStatus, juniAcctngFileXferMode, juniAcctngFileXferIndex, juniAcctngFileXferSecondaryIndex, juniAcctngObsInterfaceAdminStatus, juniAcctngObsInterfaceOperStatus, juniAcctngObsInterfaceRowStatus, juniAcctngObsInterfaceAccntgFileIndex } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when selection policy name and type objects were added." ::= { juniAcctngGroups 2 } juniAcctngBasicGroup3 OBJECT-GROUP OBJECTS { juniAcctngSelectionType, juniAcctngSelectionMode, juniAcctngSelectionMaxIfStackLevels, juniAcctngSelectionPolicyName, juniAcctngSelectionPolicyType, juniAcctngSelectionIfStackRowStatus, juniAcctngFileXferMode, juniAcctngFileXferIndex, juniAcctngFileXferSecondaryIndex, juniAcctngObsInterfaceAdminStatus, juniAcctngObsInterfaceOperStatus, juniAcctngObsInterfaceRowStatus, juniAcctngObsInterfaceAccntgFileIndex } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when the inteface control table was modified." ::= { juniAcctngGroups 3 } juniAcctngDeprecatedGroup OBJECT-GROUP OBJECTS { juniAcctngSelectionSubtreeType } STATUS deprecated DESCRIPTION "This group contains a deprecated object that is no longer recommended but may still be supported on some implemtations for backward compatibility." ::= { juniAcctngGroups 4 } juniAcctngBasicGroup4 OBJECT-GROUP OBJECTS { juniAcctngInterfaceDescrFormat, juniAcctngInterfaceNumberingMode, juniAcctngFileFormat, juniAcctngSelectionType, juniAcctngSelectionMode, juniAcctngSelectionMaxIfStackLevels, juniAcctngSelectionPolicyName, juniAcctngSelectionPolicyType, juniAcctngSelectionIfStackRowStatus, juniAcctngFileXferMode, juniAcctngFileXferIndex, juniAcctngFileXferSecondaryIndex, juniAcctngInterfaceAdminStatus, juniAcctngInterfaceOperStatus, juniAcctngInterfaceRowStatus } STATUS current DESCRIPTION "Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when the selection control table was modified." ::= { juniAcctngGroups 5 } juniAcctngBasicGroup5 OBJECT-GROUP OBJECTS { juniAcctngInterfaceDescrFormat, juniAcctngInterfaceNumberingMode, juniAcctngFileFormat, juniAcctngSelectionType, juniAcctngSelectionMode, juniAcctngSelectionMaxIfStackLevels, juniAcctngSelectionPolicyName, juniAcctngSelectionPolicyType, juniAcctngSelectionIfStackRowStatus, juniAcctngSelectionIfCreateDeleteStats, juniAcctngSelectionIfCreateDeleteStatsIfTypes, juniAcctngFileXferMode, juniAcctngFileXferIndex, juniAcctngFileXferSecondaryIndex, juniAcctngInterfaceAdminStatus, juniAcctngInterfaceOperStatus, juniAcctngInterfaceRowStatus, juniAcctngIfFinalStatsXferStatsReceived, juniAcctngIfFinalStatsXferStatsTransferred, juniAcctngIfFinalStatsXferStatsDropped } STATUS obsolete DESCRIPTION "A collection of objects providing control of the basic collection of accounting data for connection-less networks." ::= { juniAcctngGroups 6 } juniAcctngBasicGroup6 OBJECT-GROUP OBJECTS { juniAcctngVirtualRouterTableIndex, juniAcctngVirtualRouterTableVRName, juniAcctngVirtualRouterTableRowStatus } STATUS current DESCRIPTION "A collection of objects providing control of the Virtual Router based accounting." ::= { juniAcctngGroups 7 } END