-- ***************************************************************************** -- Juniper-ATM-1483-Profile-MIB -- -- Juniper Networks Enterprise MIB -- ATM 1483 Profile MIB -- -- Copyright (c) 2004 Juniper Networks, Inc. All Rights Reserved. -- Copyright (c) 2003, 2004 Juniper Networks, Inc. All Rights Reserved. -- ***************************************************************************** Juniper-ATM-1483-Profile-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Gauge32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC juniMibs FROM Juniper-MIBs JuniEnable, JuniSetMap FROM Juniper-TC JuniProfileIfEncaps FROM Juniper-PROFILE-MIB; juniAtm1483ProfileMIB MODULE-IDENTITY LAST-UPDATED "200511181407Z" -- 18-Nov-05 2:07 PM EST ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "The ATM Profile MIB for the Juniper Networks, Inc. enterprise." -- Revision History REVISION "200511181407Z" -- 18-Nov-05 2:07 PM EST - JUNOSe 7.3 DESCRIPTION "Added ATM VC class support." REVISION "200411022107Z" -- 02-Nov-04 04:07 PM EST - JUNOSe 7.0 DESCRIPTION "Added Encapsulation Type Lockout objects." REVISION "200411022107Z" -- 02-Nov-04 04:07 PM EST - JUNOSe 5.3 DESCRIPTION "Added ifALias support to profile entries. Added advisoryRxSpeed to profile entries." REVISION "200411022107Z" -- 02-Nov-04 04:07 PM EST - JUNOSe 5.1 DESCRIPTION "Initial version of this MIB module. Added OAM support to profile entries." ::= { juniMibs 58 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniAtm1483ProfileObjects OBJECT IDENTIFIER ::= { juniAtm1483ProfileMIB 1 } juniAtm1483Profile OBJECT IDENTIFIER ::= { juniAtm1483ProfileObjects 1 } -- -- This MIB defines configuration profile structure for ATM interfaces. -- The creation/deletion of profiles and mapping of profile names to profile -- indices is coordinated in the Juniper-PROFILE-MIB. -- -- -- The ATM 1483 Profile Table -- juniAtm1483ProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAtm1483ProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains profiles for configuring bulk ATM circuits. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB." ::= { juniAtm1483Profile 1 } juniAtm1483ProfileEntry OBJECT-TYPE SYNTAX JuniAtm1483ProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A profile describing VCC configuration of an ATM subinterface." INDEX { juniAtm1483ProfileId } ::= { juniAtm1483ProfileTable 1 } JuniAtm1483ProfileEntry ::= SEQUENCE { juniAtm1483ProfileId Unsigned32, juniAtm1483ProfileSetMap JuniSetMap, juniAtm1483ProfileVccType INTEGER, juniAtm1483ProfileVccServiceCategory INTEGER, juniAtm1483ProfileVccPcr Gauge32, juniAtm1483ProfileVccScr Gauge32, juniAtm1483ProfileVccMbs Gauge32, juniAtm1483ProfileIfAlias DisplayString, juniAtm1483ProfileAdvisoryRxSpeed Integer32, juniAtm1483ProfileVccOamAdminStatus INTEGER, juniAtm1483ProfileVccOamLoopbackFrequency Unsigned32, juniAtm1483ProfileVcClassName DisplayString } juniAtm1483ProfileId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable." ::= { juniAtm1483ProfileEntry 1 } juniAtm1483ProfileSetMap OBJECT-TYPE SYNTAX JuniSetMap MAX-ACCESS read-write STATUS current DESCRIPTION "A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring JuniSetMap." ::= { juniAtm1483ProfileEntry 2 } juniAtm1483ProfileVccType OBJECT-TYPE SYNTAX INTEGER { rfc1483VcMux(0), rfc1483Llc(1), autoconfig(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. 'autoconfig' will recognize both VcMux and LLC formats." DEFVAL { rfc1483VcMux } ::= { juniAtm1483ProfileEntry 3 } juniAtm1483ProfileVccServiceCategory OBJECT-TYPE SYNTAX INTEGER { ubr(0), ubrPcr(1), nrtVbr(2), cbr(3), rtVbr(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-realtime Variable Bit Rate. cbr Constant Bit Rate. rtVbr Realtime Variable Bit Rate." DEFVAL { ubr } ::= { juniAtm1483ProfileEntry 4 } juniAtm1483ProfileVccPcr OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bits per second" MAX-ACCESS read-write STATUS current DESCRIPTION "Peak Cell Rate, in kilo-bits per second (kbps), of this circuit. This parameter is only required when juniAtm1483ProfileVccServiceCategory is configured to have one of the following values: ubrPcr nrtVbr cbr rtVbr " DEFVAL { 0 } ::= { juniAtm1483ProfileEntry 5 } juniAtm1483ProfileVccScr OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bits per second" MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit. This parameter is only required when juniAtm1483ProfileVccServiceCategory is configured to have one of the following values: nrtVbr rtVbr " DEFVAL { 0 } ::= { juniAtm1483ProfileEntry 6 } juniAtm1483ProfileVccMbs OBJECT-TYPE SYNTAX Gauge32 UNITS "cells" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtm1483ProfileVccServiceCategory is configured to have one of the following values: nrtVbr rtVbr " DEFVAL { 0 } ::= { juniAtm1483ProfileEntry 7 } juniAtm1483ProfileIfAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. This object initializes ifAlias for the interface. Note, all interfaces created through the same profile entry will have identical values for ifAlias." ::= { juniAtm1483ProfileEntry 8 } juniAtm1483ProfileAdvisoryRxSpeed OBJECT-TYPE SYNTAX Integer32 (0..2147483647) UNITS "kilo-bits per second" MAX-ACCESS read-write STATUS current DESCRIPTION "Advisory receive speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for the underlying circuit receive speed. A value of 0 indicates that this feature is not enabled." DEFVAL { 0 } ::= { juniAtm1483ProfileEntry 9 } juniAtm1483ProfileVccOamAdminStatus OBJECT-TYPE SYNTAX INTEGER { oamAdminStateDisabled(1), oamAdminStateEnabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of OAM for the interface identified by this entry." DEFVAL { oamAdminStateDisabled } ::= { juniAtm1483ProfileEntry 10 } juniAtm1483ProfileVccOamLoopbackFrequency OBJECT-TYPE SYNTAX Unsigned32 (0..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The OAM loopback frequency for the interface identified by this entry." DEFVAL { 10 } ::= { juniAtm1483ProfileEntry 11 } juniAtm1483ProfileVcClassName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the ATM VC class assigned to this profile." ::= { juniAtm1483ProfileEntry 12 } -- -- ATM 1483 Auto-configuration Table -- juniAtm1483ProfileAutoConfTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAtm1483ProfileAutoConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures recognition of incoming data encapsulation types that trigger autoconfiguration on an interface." ::= { juniAtm1483Profile 2 } juniAtm1483ProfileAutoConfEntry OBJECT-TYPE SYNTAX JuniAtm1483ProfileAutoConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures recognition of an incoming data encapsulation type that triggers autoconfiguration on an interface." INDEX { juniAtm1483ProfileAutoConfId, juniAtm1483ProfileAutoConfEncaps } ::= { juniAtm1483ProfileAutoConfTable 1 } JuniAtm1483ProfileAutoConfEntry ::= SEQUENCE { juniAtm1483ProfileAutoConfId Unsigned32, juniAtm1483ProfileAutoConfEncaps JuniProfileIfEncaps, juniAtm1483ProfileAutoConfEnable JuniEnable, juniAtm1483ProfileAutoConfLockoutMin Integer32, juniAtm1483ProfileAutoConfLockoutMax Integer32 } juniAtm1483ProfileAutoConfId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable." ::= { juniAtm1483ProfileAutoConfEntry 1 } juniAtm1483ProfileAutoConfEncaps OBJECT-TYPE SYNTAX JuniProfileIfEncaps MAX-ACCESS not-accessible STATUS current DESCRIPTION "The encapsulating protocol type to which the autconfiguration information in this entry applies. The valid values are: ip(0), ppp(1), pppoe(17), bridgedEthernet(19) " ::= { juniAtm1483ProfileAutoConfEntry 2 } juniAtm1483ProfileAutoConfEnable OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, permits autoconfiguration of the specified interface when the specified encapsulation is recognized in an incoming data frame. This parameter can only be set when juniAtm1483ProfileAutoConfEncaps is configured to one of the following values: ip(0), ppp(1) pppoe(17), bridgedEthernet(19) " ::= { juniAtm1483ProfileAutoConfEntry 3 } juniAtm1483ProfileAutoConfLockoutMin OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This only takes effect if juniAtm1483ProfileAutoConfEnable is set to enable for the encapsulation type for this interface. The ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type is enabled by default. The initial lockout duration is this object's value and increases exponentially for each failure that occurs for the specified encapsulation type for the specified interface within the greater of 15 minutes and juniAtm1483ProfileAutoConfLockoutMax. The lockout duration for the specified encapsulation type will not exceed juniAtm1483ProfileAutoConfLockoutMax. If the time between creation errors for the specified encapsulation type for the specified interface is greater than the greater of 15 minutes and juniAtm1483ProfileAutoConfLockoutMax, then the lockout duration reverts to this object's value. To disable the ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type for the specified interface, the value of this object and juniAtm1483ProfileAutoConfLockoutMax must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes." DEFVAL { 1 } ::= { juniAtm1483ProfileAutoConfEntry 4 } juniAtm1483ProfileAutoConfLockoutMax OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This value must equal or exceed the value for juniAtm1483ProfileAutoConfLockoutMin. This only takes effect if juniAtm1483ProfileAutoConfEnable is set to enable for the encapsulation type for this interface. The ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type is enabled by default. The initial lockout duration is juniAtm1483ProfileAutoConfLockoutMin and increases exponentially for each failure that occurs for the specified encapsulation type for the specified interface within the greater of 15 minutes and this object's value. The lockout duration for the specified encapsulation type will not exceed this object's value. If the time between creation errors for the specified encapsulation type for the specified interface is greater than the greater of 15 minutes and this object's value, then the lockout duration reverts to juniAtm1483ProfileAutoConfLockoutMin. To disable the ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type for the specified interface, the value of this object and juniAtm1483ProfileAutoConfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes." DEFVAL { 300 } ::= { juniAtm1483ProfileAutoConfEntry 5 } -- -- ATM 1483 Profile Nested Profile Table -- juniAtm1483ProfileNestedProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAtm1483ProfileNestedProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies nested profiles for incoming data encapsulation types. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB." ::= { juniAtm1483Profile 3 } juniAtm1483ProfileNestedProfileEntry OBJECT-TYPE SYNTAX JuniAtm1483ProfileNestedProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies nested profile for incoming data encapsulation type." INDEX { juniAtm1483ProfileNestedProfileId, juniAtm1483ProfileNestedProfileEncaps } ::= { juniAtm1483ProfileNestedProfileTable 1 } JuniAtm1483ProfileNestedProfileEntry ::= SEQUENCE { juniAtm1483ProfileNestedProfileId Unsigned32, juniAtm1483ProfileNestedProfileEncaps JuniProfileIfEncaps, juniAtm1483ProfileNestedProfileUpperIfProfileName DisplayString } juniAtm1483ProfileNestedProfileId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable." ::= { juniAtm1483ProfileNestedProfileEntry 1 } juniAtm1483ProfileNestedProfileEncaps OBJECT-TYPE SYNTAX JuniProfileIfEncaps MAX-ACCESS not-accessible STATUS current DESCRIPTION "The encapsulating protocol type to which the nested profile specified in this entry applies. The valid values are: ip(0), ppp(1), pppoe(17), bridgedEthernet(19) " ::= { juniAtm1483ProfileNestedProfileEntry 2 } juniAtm1483ProfileNestedProfileUpperIfProfileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of profile used for the protocol type specified by juniAtm1483ProfileNestedProfileEncaps." ::= { juniAtm1483ProfileNestedProfileEntry 3 } -- -- ATM 1483 Profile Subscriber Table -- juniAtm1483ProfileSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniAtm1483ProfileSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures subscriber identity used in circumstances where the remote subscriber's identity cannot be queried directly (e.g. dynamic IPoA operation). Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB." ::= { juniAtm1483Profile 4 } juniAtm1483ProfileSubscriberEntry OBJECT-TYPE SYNTAX JuniAtm1483ProfileSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures subscriber identity used in circumstances where the remote subscriber's identity cannot be queried directly (e.g. dynamic IPoA operation)." INDEX { juniAtm1483ProfileSubscriberId, juniAtm1483ProfileSubscriberEncaps } ::= { juniAtm1483ProfileSubscriberTable 1 } JuniAtm1483ProfileSubscriberEntry ::= SEQUENCE { juniAtm1483ProfileSubscriberId Unsigned32, juniAtm1483ProfileSubscriberEncaps JuniProfileIfEncaps, juniAtm1483ProfileSubscriberNamePrefix JuniEnable, juniAtm1483ProfileSubscriberName DisplayString, juniAtm1483ProfileSubscriberPasswordPrefix JuniEnable, juniAtm1483ProfileSubscriberPassword DisplayString, juniAtm1483ProfileSubscriberDomain DisplayString } juniAtm1483ProfileSubscriberId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable." ::= { juniAtm1483ProfileSubscriberEntry 1 } juniAtm1483ProfileSubscriberEncaps OBJECT-TYPE SYNTAX JuniProfileIfEncaps MAX-ACCESS not-accessible STATUS current DESCRIPTION "The encapsulating protocol type to which the subscriber information in this entry applies. The valid values are: ip(0), bridgedEthernet(19) " ::= { juniAtm1483ProfileSubscriberEntry 2 } juniAtm1483ProfileSubscriberNamePrefix OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, indicates whether the value of juniSubscriberName is a prefix rather than a full name. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured to one of the following values: ip(0), bridgedEthernet(19) For all other values of juniAtm1483ProfileSubscriberEncaps it returns 'disable'." ::= { juniAtm1483ProfileSubscriberEntry 3 } juniAtm1483ProfileSubscriberName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "If juniAtm1483ProfileSubscriberNamePrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber name. The full name is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured to one of the following values: ip(0), bridgedEthernet(19) For all other values of juniAtm1483ProfileSubscriberEncaps it returns an empty string." ::= { juniAtm1483ProfileSubscriberEntry 4 } juniAtm1483ProfileSubscriberPasswordPrefix OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, indicates whether the value of juniAtm1483ProfileSubscriberPassword is a prefix rather than a full password. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured to one of the following values: ip(0), bridgedEthernet(19) For all other values of juniAtm1483ProfileSubscriberEncaps it returns an empty string." ::= { juniAtm1483ProfileSubscriberEntry 5 } juniAtm1483ProfileSubscriberPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The subscriber's password. If juniAtm1483ProfileSubscriberPasswordPrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber password. The full password is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured to one of the following values: ip(0), bridgedEthernet(19) For all other values of juniAtm1483ProfileSubscriberEncaps it returns an empty string." ::= { juniAtm1483ProfileSubscriberEntry 6 } juniAtm1483ProfileSubscriberDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The subscriber's domain. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured to one of the following values: ip(0), bridgedEthernet(19) For all other values of juniAtm1483ProfileSubscriberEncaps it returns an empty string." ::= { juniAtm1483ProfileSubscriberEntry 7 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniAtm1483ProfileConformance OBJECT IDENTIFIER ::= { juniAtm1483ProfileMIB 4 } juniAtm1483ProfileCompliances OBJECT IDENTIFIER ::= { juniAtm1483ProfileConformance 1 } juniAtm1483ProfileGroups OBJECT IDENTIFIER ::= { juniAtm1483ProfileConformance 2 } -- -- compliance statements -- juniAtm1483ProfileCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper ATM Profile MIB. This statement became obsolete when ifALias support was added to profile entries." MODULE -- this module MANDATORY-GROUPS { juniAtm1483ProfileGroup } ::= { juniAtm1483ProfileCompliances 1 } -- JUNOSe 5.1 juniAtm1483ProfileCompliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper ATM Profile MIB. This statement became obsolete when lockout objects were added to juniAtm1483ProfileAutoConfTable." MODULE -- this module MANDATORY-GROUPS { juniAtm1483ProfileGroup2 } ::= { juniAtm1483ProfileCompliances 2 } -- JUNOSe 5.3 juniAtm1483ProfileCompliance3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper ATM Profile MIB." MODULE -- this module MANDATORY-GROUPS { juniAtm1483ProfileGroup3 } ::= { juniAtm1483ProfileCompliances 3 } -- JUNOSe 7.0 juniAtm1483ProfileCompliance4 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper ATM Profile MIB." MODULE -- this module MANDATORY-GROUPS { juniAtm1483ProfileGroup6 } ::= { juniAtm1483ProfileCompliances 4 } -- JUNOSe 7.3 -- -- units of conformance -- juniAtm1483ProfileGroup OBJECT-GROUP OBJECTS { juniAtm1483ProfileSetMap, juniAtm1483ProfileVccType, juniAtm1483ProfileVccServiceCategory, juniAtm1483ProfileVccPcr, juniAtm1483ProfileVccScr, juniAtm1483ProfileVccMbs, juniAtm1483ProfileAutoConfEnable, juniAtm1483ProfileNestedProfileUpperIfProfileName, juniAtm1483ProfileSubscriberNamePrefix, juniAtm1483ProfileSubscriberName, juniAtm1483ProfileSubscriberPasswordPrefix, juniAtm1483ProfileSubscriberPassword, juniAtm1483ProfileSubscriberDomain } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of profile functionality for ATM subinterfaces in a Juniper product. This group became obsolete when ifALias support was added to profile entries." ::= { juniAtm1483ProfileGroups 1 } juniAtm1483ProfileGroup2 OBJECT-GROUP OBJECTS { juniAtm1483ProfileSetMap, juniAtm1483ProfileVccType, juniAtm1483ProfileVccServiceCategory, juniAtm1483ProfileVccPcr, juniAtm1483ProfileVccScr, juniAtm1483ProfileVccMbs, juniAtm1483ProfileIfAlias, juniAtm1483ProfileAdvisoryRxSpeed, juniAtm1483ProfileAutoConfEnable, juniAtm1483ProfileNestedProfileUpperIfProfileName, juniAtm1483ProfileSubscriberNamePrefix, juniAtm1483ProfileSubscriberName, juniAtm1483ProfileSubscriberPasswordPrefix, juniAtm1483ProfileSubscriberPassword, juniAtm1483ProfileSubscriberDomain } STATUS obsolete DESCRIPTION "Obolete collection of objects providing management of profile functionalityfor ATM subinterfaces in a Juniper product. This group became obsolete when OAM support was added to profile entries." ::= { juniAtm1483ProfileGroups 2 } juniAtm1483ProfileGroup3 OBJECT-GROUP OBJECTS { juniAtm1483ProfileSetMap, juniAtm1483ProfileVccType, juniAtm1483ProfileVccServiceCategory, juniAtm1483ProfileVccPcr, juniAtm1483ProfileVccScr, juniAtm1483ProfileVccMbs, juniAtm1483ProfileVccOamAdminStatus, juniAtm1483ProfileVccOamLoopbackFrequency, juniAtm1483ProfileAutoConfEnable, juniAtm1483ProfileNestedProfileUpperIfProfileName, juniAtm1483ProfileSubscriberNamePrefix, juniAtm1483ProfileSubscriberName, juniAtm1483ProfileSubscriberPasswordPrefix, juniAtm1483ProfileSubscriberPassword, juniAtm1483ProfileSubscriberDomain } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of profile functionality for ATM subinterfaces in a Juniper product. This group became obsolete when ifALias support was added to profile entries." ::= { juniAtm1483ProfileGroups 3 } juniAtm1483ProfileGroup4 OBJECT-GROUP OBJECTS { juniAtm1483ProfileSetMap, juniAtm1483ProfileVccType, juniAtm1483ProfileVccServiceCategory, juniAtm1483ProfileVccPcr, juniAtm1483ProfileVccScr, juniAtm1483ProfileVccMbs, juniAtm1483ProfileIfAlias, juniAtm1483ProfileAdvisoryRxSpeed, juniAtm1483ProfileVccOamAdminStatus, juniAtm1483ProfileVccOamLoopbackFrequency, juniAtm1483ProfileAutoConfEnable, juniAtm1483ProfileNestedProfileUpperIfProfileName, juniAtm1483ProfileSubscriberNamePrefix, juniAtm1483ProfileSubscriberName, juniAtm1483ProfileSubscriberPasswordPrefix, juniAtm1483ProfileSubscriberPassword, juniAtm1483ProfileSubscriberDomain } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of profile functionality for ATM subinterfaces in a Juniper product. This group became obsolete when Encapsulation Type Lockout objects were added to profile entries." ::= { juniAtm1483ProfileGroups 4 } juniAtm1483ProfileGroup5 OBJECT-GROUP OBJECTS { juniAtm1483ProfileSetMap, juniAtm1483ProfileVccType, juniAtm1483ProfileVccServiceCategory, juniAtm1483ProfileVccPcr, juniAtm1483ProfileVccScr, juniAtm1483ProfileVccMbs, juniAtm1483ProfileIfAlias, juniAtm1483ProfileAdvisoryRxSpeed, juniAtm1483ProfileVccOamAdminStatus, juniAtm1483ProfileVccOamLoopbackFrequency, juniAtm1483ProfileAutoConfEnable, juniAtm1483ProfileAutoConfLockoutMin, juniAtm1483ProfileAutoConfLockoutMax, juniAtm1483ProfileNestedProfileUpperIfProfileName, juniAtm1483ProfileSubscriberNamePrefix, juniAtm1483ProfileSubscriberName, juniAtm1483ProfileSubscriberPasswordPrefix, juniAtm1483ProfileSubscriberPassword, juniAtm1483ProfileSubscriberDomain } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of profile functionality for ATM subinterfaces in a Juniper product." ::= { juniAtm1483ProfileGroups 5 } juniAtm1483ProfileGroup6 OBJECT-GROUP OBJECTS { juniAtm1483ProfileSetMap, juniAtm1483ProfileVccType, juniAtm1483ProfileVccServiceCategory, juniAtm1483ProfileVccPcr, juniAtm1483ProfileVccScr, juniAtm1483ProfileVccMbs, juniAtm1483ProfileIfAlias, juniAtm1483ProfileAdvisoryRxSpeed, juniAtm1483ProfileVccOamAdminStatus, juniAtm1483ProfileVccOamLoopbackFrequency, juniAtm1483ProfileVcClassName, juniAtm1483ProfileAutoConfEnable, juniAtm1483ProfileAutoConfLockoutMin, juniAtm1483ProfileAutoConfLockoutMax, juniAtm1483ProfileNestedProfileUpperIfProfileName, juniAtm1483ProfileSubscriberNamePrefix, juniAtm1483ProfileSubscriberName, juniAtm1483ProfileSubscriberPasswordPrefix, juniAtm1483ProfileSubscriberPassword, juniAtm1483ProfileSubscriberDomain } STATUS current DESCRIPTION "A collection of objects providing management of profile functionality for ATM subinterfaces in a Juniper product." ::= { juniAtm1483ProfileGroups 6 } END