-- ***************************************************************************** -- Juniper-DS3-MIB -- -- Juniper Networks Enterprise MIB -- DS3 MIB -- -- Copyright (c) 1998, 1999 Redstone Communications, Inc. -- Copyright (c) 1999, 2002 Unisphere Networks, Inc. -- Copyright (c) 2002, 2003 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-DS3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndexOrZero FROM IF-MIB TruthValue, RowStatus, DisplayString FROM SNMPv2-TC JuniNextIfIndex FROM Juniper-TC juniMibs FROM Juniper-MIBs PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB dsx3FarEndCurrentEntry, dsx3FarEndIntervalEntry, dsx3FarEndTotalEntry, dsx3FarEndConfigEntry FROM DS3-MIB; juniDs3MIB MODULE-IDENTITY LAST-UPDATED "200309301211Z" -- 30-Sep-03 08:11 AM EDT ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net" DESCRIPTION "The DS3 MIB for the Juniper Networks enterprise. This MIB contains managed objects for DS3/E3 interfaces. Management objects are provided to supplement those found in the standard DS3-MIB (RFC 2496)." -- Revision History REVISION "200410120651Z" -- 12-Oct-04 01:51 AM EST - RX 5.0.4 DESCRIPTION "Changed the upper bound value of juniDsx3LineLength from 64000 to 137 meters." REVISION "200309301211Z" -- 30-Sep-03 08:11 AM EDT - JUNOSe 5.3 DESCRIPTION "Changed the standard MIB support from the RFC1407-MIB (SMIv1) to the DS3-MIB (SMIv2)." REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200209121659Z" -- 12-Sep-02 12:59 PM EDT - JUNOSe 4.1 DESCRIPTION "Added support for far end MDL generator number and port number. Added support for far end MDL carrier." REVISION "200204041407Z" -- 04-Apr-02 09:07 AM EST - JUNOSe 4.0 DESCRIPTION "Added invalid seconds objects to the far end statistics tables and more configuration objects." REVISION "200202222121Z" -- 22-Feb-02 04:21 PM EST - JUNOSe 3.3 DESCRIPTION "Modified the valid range for juniDsx3Ds3Channel" REVISION "200104271949Z" -- 27-Apr-01 03:49 PM EDT - JUNOSe 3.0 DESCRIPTION "Added dynamic DS3 interface support." REVISION "200102050000Z" -- 05-Feb-01 - JUNOSe 2.6 DESCRIPTION "Added following objects: juniDsx3Ds3DsuMode juniDsx3Ds3BandwidthLimit juniDsx3Ds3DsuScrambleMode" REVISION "9907270000Z" -- 27-Jul-99 - JUNOSe 1.1 DESCRIPTION "Added juniDsx3LineType and juniDsx3CellScramblerConfig." REVISION "9811130000Z" -- 13-Nov-98 - JUNOSe 1.0 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 4 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniDs3Objects OBJECT IDENTIFIER ::= { juniDs3MIB 1 } -- ///////////////////////////////////////////////////////////////////////////// -- -- DS3 Interfaces -- -- ///////////////////////////////////////////////////////////////////////////// -- -- The DS3 Configuration Table -- juniDsx3ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDsx3ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for DS3/E3 interfaces present in the system." ::= { juniDs3Objects 1 } juniDsx3ConfigEntry OBJECT-TYPE SYNTAX JuniDsx3ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an DS3/E3 interface." INDEX { ifIndex } ::= { juniDsx3ConfigTable 1 } JuniDsx3ConfigEntry ::= SEQUENCE { juniDsx3LineLength Integer32, juniDsx3LineType INTEGER, juniDsx3CellScramblerConfig INTEGER, juniDsx3Channelization TruthValue, juniDsx3InterfaceType INTEGER, juniDsx3Application INTEGER, juniDsx3Ds3Channel INTEGER, juniDsx3LowerIfIndex InterfaceIndexOrZero, juniDsx3RowStatus RowStatus, juniDsx3Ds3DsuMode INTEGER, juniDsx3Ds3BandwidthLimit INTEGER, juniDsx3Ds3DsuScrambleMode INTEGER, juniDsx3MdlCarrier INTEGER, juniDsx3MdlTransmit INTEGER, juniDsx3MdlEic DisplayString, juniDsx3MdlLic DisplayString, juniDsx3MdlFic DisplayString, juniDsx3MdlUnit DisplayString, juniDsx3MdlPfi DisplayString, juniDsx3MdlPort DisplayString, juniDsx3MdlGenerator DisplayString } juniDsx3LineLength OBJECT-TYPE SYNTAX Integer32 (0..137) UNITS "meters" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry." ::= { juniDsx3ConfigEntry 1 } juniDsx3LineType OBJECT-TYPE SYNTAX INTEGER { juniDsx3other(1), juniDsx3M23(2), juniDsx3SYNTRAN(3), juniDsx3CbitParity(4), juniDsx3ClearChannel(5), juniE3G832(6), juniE3Framed(7), juniE3Plcp(8), juniDsx3M23Plcp(18), juniDsx3CbitParityPlcp(20) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. Note that this object represents the actual line type when the corresponding value of dsx3LineType is dsx3other(1). The values, in sequence, describe: TITLE: SPECIFICATION: dsx3M23 ANSI T1.107-1988 dsx3SYNTRAN ANSI T1.107-1988 dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987 e3G832 ITU-T G.832 e3Framed ITU-T G.751 e3Plcp ETSI T/NA(91)18. dsx3M23Plcp ATM Forum af-phy-0054.000 dsx3CbitParityPlcp ATM Forum af-phy-0054.000 " ::= { juniDsx3ConfigEntry 2 } juniDsx3CellScramblerConfig OBJECT-TYPE SYNTAX INTEGER { scramblerOn(1), scramblerOff(2), notSupported(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this object returns the value notSupported(3)." ::= { juniDsx3ConfigEntry 3 } juniDsx3Channelization OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization." ::= { juniDsx3ConfigEntry 4 } juniDsx3InterfaceType OBJECT-TYPE SYNTAX INTEGER { ds3T3(0), ds3E3(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The DS3 interface type setting." ::= { juniDsx3ConfigEntry 5 } juniDsx3Application OBJECT-TYPE SYNTAX INTEGER { ds3FrameOverDs3(0), ds3AtmOverDs3(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The interface application setting." ::= { juniDsx3ConfigEntry 6 } juniDsx3Ds3Channel OBJECT-TYPE SYNTAX INTEGER (1..28) MAX-ACCESS read-create STATUS current DESCRIPTION "The DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface." ::= { juniDsx3ConfigEntry 7 } juniDsx3LowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { juniDsx3ConfigEntry 8 } juniDsx3RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support setting the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniDsx3RowStatus juniDsx3LowerIfIndex In addition, when creating an entry the following conditions must hold: A value for ifIndex must have been determined previously, by reading juniDsx3NextIfIndex. The interface identified by juniDsx3LowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table." ::= { juniDsx3ConfigEntry 9 } juniDsx3Ds3DsuMode OBJECT-TYPE SYNTAX INTEGER { ds3DsuModeNone(0), ds3DsuLarsCom(2), ds3DsuDigitalLink(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The DSU configuration setting for this entry." DEFVAL { ds3DsuModeNone } ::= { juniDsx3ConfigEntry 10 } juniDsx3Ds3BandwidthLimit OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "The DSU bandwidth configuration for this entry." DEFVAL { 0 } ::= { juniDsx3ConfigEntry 11 } juniDsx3Ds3DsuScrambleMode OBJECT-TYPE SYNTAX INTEGER { ds3DsuScrambleDisabled(0), ds3DsuScrambleEnable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The DSU scramble mode setting for this entry." DEFVAL { ds3DsuScrambleDisabled } ::= { juniDsx3ConfigEntry 12 } juniDsx3MdlCarrier OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the interface is used in carrier environment." DEFVAL { disabled } ::= { juniDsx3ConfigEntry 13 } juniDsx3MdlTransmit OBJECT-TYPE SYNTAX INTEGER { path(1), idlesignal(2), pathIdlesignal(3), testsignal(4), pathTestsignal(5), idlesignalTestsignal(6), pathIdlesignalTestsignal(7), none(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies transmission enabling." DEFVAL { none } ::= { juniDsx3ConfigEntry 14 } juniDsx3MdlEic OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the equipment identification code." DEFVAL { "" } ::= { juniDsx3ConfigEntry 15 } juniDsx3MdlLic OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the location identification code." DEFVAL { "" } ::= { juniDsx3ConfigEntry 16 } juniDsx3MdlFic OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the frame identification code." DEFVAL { "" } ::= { juniDsx3ConfigEntry 17 } juniDsx3MdlUnit OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the unit identification code." ::= { juniDsx3ConfigEntry 18 } juniDsx3MdlPfi OBJECT-TYPE SYNTAX DisplayString (SIZE(0..38)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the facility identification code to send in the MDL path message." DEFVAL { "" } ::= { juniDsx3ConfigEntry 19 } juniDsx3MdlPort OBJECT-TYPE SYNTAX DisplayString (SIZE(0..38)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the equipment port number to send in the MDL idle signal message." ::= { juniDsx3ConfigEntry 20 } juniDsx3MdlGenerator OBJECT-TYPE SYNTAX DisplayString (SIZE(0..38)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the generator number to send in the MDL test signal message." ::= { juniDsx3ConfigEntry 21 } juniDs3NextIfIndex OBJECT-TYPE SYNTAX JuniNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in juniDsx3ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously." ::= { juniDs3Objects 2 } -- -- The DS3 Far End Current -- -- The DS3 Far End current table contains statistics being -- collected for the current 15 minute interval. -- juniDsx3FarEndCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDsx3FarEndCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for DS3/E3 interfaces present in the system." ::= { juniDs3Objects 3 } juniDsx3FarEndCurrentEntry OBJECT-TYPE SYNTAX JuniDsx3FarEndCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an DS3/E3 interface." AUGMENTS { dsx3FarEndCurrentEntry } ::= { juniDsx3FarEndCurrentTable 1 } JuniDsx3FarEndCurrentEntry ::= SEQUENCE { juniDsx3FarEndCurrentInvalidSeconds PerfCurrentCount } juniDsx3FarEndCurrentInvalidSeconds OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the current 15 minute interval." ::= { juniDsx3FarEndCurrentEntry 1 } -- -- the DS3 Far End Interval -- The DS3 Far End Interval Table contains statistics collected by each DS3 -- Interface over the previous 24 hours of operation. The past 24 hours are -- broken into 96 completed 15 minute intervals. -- juniDsx3FarEndIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDsx3FarEndIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for DS3/E3 interfaces present in the system." ::= { juniDs3Objects 4 } juniDsx3FarEndIntervalEntry OBJECT-TYPE SYNTAX JuniDsx3FarEndIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an DS3/E3 interface." AUGMENTS { dsx3FarEndIntervalEntry } ::= { juniDsx3FarEndIntervalTable 1 } JuniDsx3FarEndIntervalEntry ::= SEQUENCE { juniDsx3FarEndIntervalInvalidSeconds PerfIntervalCount } juniDsx3FarEndIntervalInvalidSeconds OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in one of the previous 96 individual 15 minute intervals." ::= { juniDsx3FarEndIntervalEntry 1 } -- -- the DS3 Far End Total -- The DS3 Far End Total Table contains the cumulative sum of the -- statistics for the 24 hour period preceding the current interval. -- juniDsx3FarEndTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDsx3FarEndTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for DS3/E3 interfaces present in the system." ::= { juniDs3Objects 5 } juniDsx3FarEndTotalEntry OBJECT-TYPE SYNTAX JuniDsx3FarEndTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an DS3/E3 interface." AUGMENTS { dsx3FarEndTotalEntry } ::= { juniDsx3FarEndTotalTable 1 } JuniDsx3FarEndTotalEntry ::= SEQUENCE { juniDsx3FarEndTotalInvalidSeconds PerfTotalCount } juniDsx3FarEndTotalInvalidSeconds OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the previous 24 hour interval." ::= { juniDsx3FarEndTotalEntry 1 } -- -- The DS3 Far End Configuration Table -- -- The DS3 Far End Configuration Table contains -- configuration information -- reported in the C-bits from the remote end. juniDsx3FarEndConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDsx3FarEndConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for DS3/E3 interfaces present in the system." ::= { juniDs3Objects 6 } juniDsx3FarEndConfigEntry OBJECT-TYPE SYNTAX JuniDsx3FarEndConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the far end configuration characteristics of an DS3/E3 interface." AUGMENTS { dsx3FarEndConfigEntry } ::= { juniDsx3FarEndConfigTable 1 } JuniDsx3FarEndConfigEntry ::= SEQUENCE { juniDsx3FarEndPortNumber DisplayString, juniDsx3FarEndGeneratorNumber DisplayString, juniDsx3FarEndCarrier INTEGER } juniDsx3FarEndPortNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..38)) MAX-ACCESS read-write STATUS current DESCRIPTION "This code identifies the port number of the Far End DS3. It is sent within the Idle Signal Message." ::= { juniDsx3FarEndConfigEntry 1 } juniDsx3FarEndGeneratorNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..38)) MAX-ACCESS read-write STATUS current DESCRIPTION "This code identifies the Far End DS3 Generator Number. It is sent within the Test Signal Message." ::= { juniDsx3FarEndConfigEntry 2 } juniDsx3FarEndCarrier OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the interface is used in carrier environment. It is sent with MDL messages." ::= { juniDsx3FarEndConfigEntry 3 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholders follow. -- juniDs3TrapControl OBJECT IDENTIFIER ::= { juniDs3MIB 2 } -- juniDs3Traps OBJECT IDENTIFIER ::= { juniDs3MIB 3 } -- juniDs3TrapPrefix OBJECT IDENTIFIER ::= { juniDs3Traps 0 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniDs3Conformance OBJECT IDENTIFIER ::= { juniDs3MIB 4 } juniDs3Compliances OBJECT IDENTIFIER ::= { juniDs3Conformance 1 } juniDs3Groups OBJECT IDENTIFIER ::= { juniDs3Conformance 2 } -- -- compliance statements -- juniDs3Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for line type and cell scrambler objects." MODULE -- this module MANDATORY-GROUPS { juniDs3Group } ::= { juniDs3Compliances 1 } -- JUNOSe 1.0 juniDs3Compliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for DSU objects." MODULE -- this module MANDATORY-GROUPS { juniDs3Group2 } ::= { juniDs3Compliances 2 } -- JUNOSe 1.1 juniDs3Compliance3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for dynamic DS3 interface objects." MODULE -- this module MANDATORY-GROUPS { juniDs3Group3 } ::= { juniDs3Compliances 3 } -- JUNOSe 2.6 juniDs3Compliance4 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when far end invalid seconds objects and more configuration objects were added." MODULE -- this module MANDATORY-GROUPS { juniDs3Group4 } ::= { juniDs3Compliances 4 } -- JUNOSe 3.0 juniDs3Compliance5 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for far end generator number, port number and carrier." MODULE -- this module MANDATORY-GROUPS { juniDs3Group5, juniDs3FarEndGroup } ::= { juniDs3Compliances 5 } -- JUNOSe 4.0 juniDs3Compliance6 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper DS3/E3 MIB." MODULE -- this module MANDATORY-GROUPS { juniDs3Group5, juniDs3FarEndGroup2 } ::= { juniDs3Compliances 6 } -- JUNOSe 4.1 -- -- units of conformance -- juniDs3Group OBJECT-GROUP OBJECTS { juniDsx3LineLength } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for line type and cell scrambler objects." ::= { juniDs3Groups 1 } juniDs3Group2 OBJECT-GROUP OBJECTS { juniDsx3LineLength, juniDsx3LineType, juniDsx3CellScramblerConfig } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for DSU configuration objects." ::= { juniDs3Groups 2 } juniDs3Group3 OBJECT-GROUP OBJECTS { juniDsx3LineLength, juniDsx3LineType, juniDsx3CellScramblerConfig, juniDsx3Ds3DsuMode, juniDsx3Ds3BandwidthLimit, juniDsx3Ds3DsuScrambleMode } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for dynamic DS3 interface objects." ::= { juniDs3Groups 3 } juniDs3Group4 OBJECT-GROUP OBJECTS { juniDsx3LineLength, juniDsx3LineType, juniDsx3CellScramblerConfig, juniDsx3Channelization, juniDsx3InterfaceType, juniDsx3Application, juniDsx3Ds3Channel, juniDsx3LowerIfIndex, juniDsx3RowStatus, juniDsx3Ds3DsuMode, juniDsx3Ds3BandwidthLimit, juniDsx3Ds3DsuScrambleMode, juniDs3NextIfIndex } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when more configuration objects were added." ::= { juniDs3Groups 4 } juniDs3Group5 OBJECT-GROUP OBJECTS { juniDsx3LineLength, juniDsx3LineType, juniDsx3CellScramblerConfig, juniDsx3Channelization, juniDsx3InterfaceType, juniDsx3Application, juniDsx3Ds3Channel, juniDsx3LowerIfIndex, juniDsx3RowStatus, juniDsx3Ds3DsuMode, juniDsx3Ds3BandwidthLimit, juniDsx3Ds3DsuScrambleMode, juniDsx3MdlCarrier, juniDsx3MdlTransmit, juniDsx3MdlEic, juniDsx3MdlLic, juniDsx3MdlFic, juniDsx3MdlUnit, juniDsx3MdlPfi, juniDsx3MdlPort, juniDsx3MdlGenerator, juniDs3NextIfIndex } STATUS current DESCRIPTION "A collection of objects providing management of DS3/E3 interfaces in a Juniper product." ::= { juniDs3Groups 5 } juniDs3FarEndGroup OBJECT-GROUP OBJECTS { juniDsx3FarEndCurrentInvalidSeconds, juniDsx3FarEndIntervalInvalidSeconds, juniDsx3FarEndTotalInvalidSeconds } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product. This group became obsolete when remote port number, generator number and carrier objects were added." ::= { juniDs3Groups 6 } juniDs3FarEndGroup2 OBJECT-GROUP OBJECTS { juniDsx3FarEndCurrentInvalidSeconds, juniDsx3FarEndIntervalInvalidSeconds, juniDsx3FarEndTotalInvalidSeconds, juniDsx3FarEndPortNumber, juniDsx3FarEndGeneratorNumber, juniDsx3FarEndCarrier } STATUS current DESCRIPTION "A collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product." ::= { juniDs3Groups 7 } END