-- ***************************************************************************** -- Juniper-DVMRP-MIB -- -- Juniper Networks Enterprise MIB -- DVMRP MIB -- -- Copyright (c) 2001 Unisphere Networks, Inc. -- Copyright (c) 2002, 2003 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-DVMRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, NOTIFICATION-TYPE, IpAddress, TimeTicks FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB junidDvmrpInterfaceEntry FROM DVMRP-STD-MIB-JUNI juniMibs FROM Juniper-MIBs; juniDvmrpMIB MODULE-IDENTITY LAST-UPDATED "200301162055Z" -- 16-Jan-03 03:55 PM EST ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "The Enterprise MIB module for management of Juniper DVMRP routers." -- Revision History REVISION "200301162055Z" -- 16-Jan-03 03:55 PM EST - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names. Added support for unicast routing and the interface announce list name." REVISION "200111302124Z" -- 30-Nov-01 04:24 PM EST - JUNOSe 3.0 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 44 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniDvmrpMIBObjects OBJECT IDENTIFIER ::= { juniDvmrpMIB 1 } juniDvmrp OBJECT IDENTIFIER ::= { juniDvmrpMIBObjects 1 } juniDvmrpScalar OBJECT IDENTIFIER ::= { juniDvmrp 1 } -- -- Juniper DVMRP scalar objects. -- juniDvmrpAdminState OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether DVMRP is enabled or not." ::= { juniDvmrpScalar 1 } juniDvmrpMcastAdminState OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether multicast is enabled or not. This is settable via the multicast component." ::= { juniDvmrpScalar 2 } juniDvmrpRouteHogNotification OBJECT-TYPE SYNTAX Integer32 (0..134217727) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of routes allowed within a 1 minute interval before a trap is issued warning that there may be a route surge going on." ::= { juniDvmrpScalar 3 } juniDvmrpRouteLimit OBJECT-TYPE SYNTAX Integer32 (0..134217727) MAX-ACCESS read-write STATUS current DESCRIPTION "The limit on the number of routes that may be advertised on a DVMRP interface." ::= { juniDvmrpScalar 4 } juniDvmrpS32PrunesOnly OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies when DVMRP is sending prunes and grafts with only a 32 bit source masks." ::= { juniDvmrpScalar 5 } juniDvmrpUnicastRouting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the unicast routing portion of the DVMRP." ::= { juniDvmrpScalar 6 } -- -- The Juniper DVMRP access list distance neighbor group. -- juniDvmrpAclDistNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDvmrpAclDistNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the access lists distance for a list of neighbors." ::= { juniDvmrp 2 } juniDvmrpAclDistNbrEntry OBJECT-TYPE SYNTAX JuniDvmrpAclDistNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the juniDvmrpAclDistNbrTable." INDEX { juniDvmrpAclDistNbrIfIndex, juniDvmrpAclDistNbrAclListName } ::= { juniDvmrpAclDistNbrTable 1 } JuniDvmrpAclDistNbrEntry ::= SEQUENCE { juniDvmrpAclDistNbrIfIndex InterfaceIndex, juniDvmrpAclDistNbrAclListName DisplayString, juniDvmrpAclDistNbrDistance Integer32, juniDvmrpAclDistNbrNbrListName DisplayString, juniDvmrpAclDistNbrStatus RowStatus } juniDvmrpAclDistNbrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which DVMRP is enabled." ::= { juniDvmrpAclDistNbrEntry 1 } juniDvmrpAclDistNbrAclListName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..80)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the access list to be used in the filter." ::= { juniDvmrpAclDistNbrEntry 2 } juniDvmrpAclDistNbrDistance OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The administritive distance metric that will be used" DEFVAL { 1 } ::= { juniDvmrpAclDistNbrEntry 3 } juniDvmrpAclDistNbrNbrListName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the access list of nbrs for this accept-filter to be applied, this field must be supplied when the row is created" ::= { juniDvmrpAclDistNbrEntry 4 } juniDvmrpAclDistNbrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { juniDvmrpAclDistNbrEntry 5 } -- -- The Juniper DVMRP Local Address table. -- This is used to retrive all of the addresses configured -- on a DVMRP interface. -- juniDvmrpLocalAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDvmrpLocalAddrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the local addresses. This is used to retrive all of the addresses configured on a DVMRP interface." ::= { juniDvmrp 3 } juniDvmrpLocalAddrTableEntry OBJECT-TYPE SYNTAX JuniDvmrpLocalAddrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the juniDvmrpLocalAddrTable." INDEX { juniDvmrpLocalAddrIfIndex, juniDvmrpLocalAddrAddrOrIfIndex } ::= { juniDvmrpLocalAddrTable 1 } JuniDvmrpLocalAddrTableEntry ::= SEQUENCE { juniDvmrpLocalAddrIfIndex InterfaceIndex, juniDvmrpLocalAddrAddrOrIfIndex Unsigned32, juniDvmrpLocalAddrMask IpAddress } juniDvmrpLocalAddrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which DVMRP is enabled." ::= { juniDvmrpLocalAddrTableEntry 1 } juniDvmrpLocalAddrAddrOrIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "For unnumbered interfaces, this takes on the value of the ifIndex. For numbered interfaces, this is the address of one of the addresses associated with the interface." ::= { juniDvmrpLocalAddrTableEntry 2 } juniDvmrpLocalAddrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address mask associated with this entry." ::= { juniDvmrpLocalAddrTableEntry 3 } -- -- The Juniper DVMRP Summary Address table. -- This is used to retrive all of the summary address configured -- on a DVMRP interface. -- juniDvmrpSummaryAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDvmrpSummaryAddrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the DVMRP summary addresses. This is used to retrive all of the summary address configured on a DVMRP interface." ::= { juniDvmrp 4 } juniDvmrpSummaryAddrTableEntry OBJECT-TYPE SYNTAX JuniDvmrpSummaryAddrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the juniDvmrpSummaryAddrTable." INDEX { juniDvmrpSummaryAddrIfIndex, juniDvmrpSummaryAddrAddress, juniDvmrpSummaryAddrMask } ::= { juniDvmrpSummaryAddrTable 1 } JuniDvmrpSummaryAddrTableEntry ::= SEQUENCE { juniDvmrpSummaryAddrIfIndex InterfaceIndex, juniDvmrpSummaryAddrAddress IpAddress, juniDvmrpSummaryAddrMask IpAddress, juniDvmrpSummaryAddrCost Integer32, juniDvmrpSummaryAddrStatus RowStatus } juniDvmrpSummaryAddrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which DVMRP is enabled." ::= { juniDvmrpSummaryAddrTableEntry 1 } juniDvmrpSummaryAddrAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the summary address that will be created." ::= { juniDvmrpSummaryAddrTableEntry 2 } juniDvmrpSummaryAddrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mask of the summary address to be created." ::= { juniDvmrpSummaryAddrTableEntry 3 } juniDvmrpSummaryAddrCost OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The administritive distance metric used to actually calculate distance vectors." DEFVAL { 1 } ::= { juniDvmrpSummaryAddrTableEntry 4 } juniDvmrpSummaryAddrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { juniDvmrpSummaryAddrTableEntry 5 } -- -- The Juniper DVMRP Interface Table. -- juniDvmrpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDvmrpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's multicast-capable interfaces. This table augments the DvmrpInterfaceTable." ::= { juniDvmrp 5 } juniDvmrpInterfaceEntry OBJECT-TYPE SYNTAX JuniDvmrpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the juniDvmrpInterfaceTable. This row extends ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides." AUGMENTS { junidDvmrpInterfaceEntry } ::= { juniDvmrpInterfaceTable 1 } JuniDvmrpInterfaceEntry ::= SEQUENCE { juniDvmrpInterfaceAutoSummary INTEGER, juniDvmrpInterfaceMetricOffsetOut Integer32, juniDvmrpInterfaceMetricOffsetIn Integer32, juniDvmrpInterfaceAdminState INTEGER, juniDvmrpInterfaceAnnounceListName DisplayString } juniDvmrpInterfaceAutoSummary OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disable auto-summarization on this interface." ::= { juniDvmrpInterfaceEntry 3 } juniDvmrpInterfaceMetricOffsetOut OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS read-create STATUS current DESCRIPTION "The distance metric for this interface which is used to calculate outbound distance vectors." DEFVAL { 0 } ::= { juniDvmrpInterfaceEntry 4 } juniDvmrpInterfaceMetricOffsetIn OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS read-create STATUS current DESCRIPTION "The distance metric for this interface which is used to calculate inbound distance vectors." DEFVAL { 1 } ::= { juniDvmrpInterfaceEntry 5 } juniDvmrpInterfaceAdminState OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether DVMRP is enabled or not." ::= { juniDvmrpInterfaceEntry 6 } juniDvmrpInterfaceAnnounceListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Configures the name of the acceptance announce filter for the IP access list." ::= { juniDvmrpInterfaceEntry 7 } -- -- The Juniper DVMRP Prune Table -- juniDvmrpPruneTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDvmrpPruneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's upstream prune state." ::= { juniDvmrp 6 } juniDvmrpPruneEntry OBJECT-TYPE SYNTAX JuniDvmrpPruneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the juniDvmrpPruneTable." INDEX { juniDvmrpPruneGroup, juniDvmrpPruneSource, juniDvmrpPruneSourceMask } ::= { juniDvmrpPruneTable 1 } JuniDvmrpPruneEntry ::= SEQUENCE { juniDvmrpPruneGroup IpAddress, juniDvmrpPruneSource IpAddress, juniDvmrpPruneSourceMask IpAddress, juniDvmrpPruneIIFIfIndex InterfaceIndex, juniDvmrpPruneUpTime TimeTicks } juniDvmrpPruneGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address which has been pruned." ::= { juniDvmrpPruneEntry 1 } juniDvmrpPruneSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the source or source network which has been pruned." ::= { juniDvmrpPruneEntry 2 } juniDvmrpPruneSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the source or source network which has been pruned. The mask must either be all 1's, or else juniDvmrpPruneSource and juniDvmrpPruneSourceMask must match juniDvmrpRouteSource and juniDvmrpRouteSourceMask for some entry in the juniDvmrpRouteTable." ::= { juniDvmrpPruneEntry 3 } juniDvmrpPruneIIFIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the upstream interface for this source group entry." ::= { juniDvmrpPruneEntry 4 } juniDvmrpPruneUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This is the amount of time that this prune has remained valid." ::= { juniDvmrpPruneEntry 5 } -- -- The Juniper DVMRP source group OIF table -- juniDvmrpSrcGrpOifTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniDvmrpSrcGrpOifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) OIFs for particular source group entries." ::= { juniDvmrp 7 } juniDvmrpSrcGrpOifEntry OBJECT-TYPE SYNTAX JuniDvmrpSrcGrpOifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the juniDvmrpSrcGrpOifTable." INDEX { juniDvmrpSrcGrpOifGroup, juniDvmrpSrcGrpOifSource, juniDvmrpSrcGrpOifSourceMask, juniDvmrpSrcGrpOifOIFIfIndex } ::= { juniDvmrpSrcGrpOifTable 1 } JuniDvmrpSrcGrpOifEntry ::= SEQUENCE { juniDvmrpSrcGrpOifGroup IpAddress, juniDvmrpSrcGrpOifSource IpAddress, juniDvmrpSrcGrpOifSourceMask IpAddress, juniDvmrpSrcGrpOifOIFIfIndex InterfaceIndex, juniDvmrpSrcGrpOifOIFPruned INTEGER, juniDvmrpSrcGrpOifOIFDnTTL TimeTicks } juniDvmrpSrcGrpOifGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address which has been pruned." ::= { juniDvmrpSrcGrpOifEntry 1 } juniDvmrpSrcGrpOifSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the source or source network which has been pruned." ::= { juniDvmrpSrcGrpOifEntry 2 } juniDvmrpSrcGrpOifSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the source or source network which has been pruned. The mask must either be all 1's, or else juniDvmrpPruneSource and juniDvmrpPruneSourceMask must match juniDvmrpRouteSource and juniDvmrpRouteSourceMask for some entry in the juniDvmrpRouteTable." ::= { juniDvmrpSrcGrpOifEntry 3 } juniDvmrpSrcGrpOifOIFIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of one of the downstream interfaces for this source group entry." ::= { juniDvmrpSrcGrpOifEntry 4 } juniDvmrpSrcGrpOifOIFPruned OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "If true this OIF has been pruned." ::= { juniDvmrpSrcGrpOifEntry 5 } juniDvmrpSrcGrpOifOIFDnTTL OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The timeout for this OIF. If juniDvmrpSrcGrpOifOIFPruned is false then this is undefined." ::= { juniDvmrpSrcGrpOifEntry 6 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniDvmrpTraps OBJECT IDENTIFIER ::= { juniDvmrp 0 } juniDvmrpRouteHogNotificationTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This is an indication that the route hog notification limit has been exceeded during the past minute. It may mean that a route surge is going on." ::= { juniDvmrpTraps 1 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniDvmrpConformance OBJECT IDENTIFIER ::= { juniDvmrpMIB 4 } juniDvmrpCompliances OBJECT IDENTIFIER ::= { juniDvmrpConformance 1 } juniDvmrpGroups OBJECT IDENTIFIER ::= { juniDvmrpConformance 2 } -- -- compliance statements -- juniDvmrpCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper DVMRP MIB. This statement became obsolete when new objects were added." MODULE -- this module MANDATORY-GROUPS { juniDvmrpBaseGroup, juniDvmrpAclDistNbrGroup, juniDvmrpInterfaceGroup, juniDvmrpSourceGroup } ::= { juniDvmrpCompliances 1 } -- JUNOSe 3.0 juniDvmrpCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper DVMRP MIB." MODULE -- this module MANDATORY-GROUPS { juniDvmrpBaseGroup2, juniDvmrpAclDistNbrGroup, juniDvmrpInterfaceGroup2, juniDvmrpSourceGroup } ::= { juniDvmrpCompliances 2 } -- JUNOSe 5.0 -- -- units of conformance -- juniDvmrpBaseGroup OBJECT-GROUP OBJECTS { juniDvmrpAdminState, juniDvmrpMcastAdminState, juniDvmrpRouteHogNotification, juniDvmrpRouteLimit, juniDvmrpS32PrunesOnly } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing basic management of DVMRP in a Juniper product. This group became obsolete when support was added for the DVMRP unicast routing object." ::= { juniDvmrpGroups 1 } juniDvmrpAclDistNbrGroup OBJECT-GROUP OBJECTS { juniDvmrpAclDistNbrDistance, juniDvmrpAclDistNbrNbrListName, juniDvmrpAclDistNbrStatus } STATUS current DESCRIPTION "A collection of objects providing management of DVMRP access list distance neighbors in a Juniper product." ::= { juniDvmrpGroups 2 } juniDvmrpInterfaceGroup OBJECT-GROUP OBJECTS { juniDvmrpLocalAddrMask, juniDvmrpSummaryAddrCost, juniDvmrpSummaryAddrStatus, juniDvmrpInterfaceAutoSummary, juniDvmrpInterfaceMetricOffsetOut, juniDvmrpInterfaceMetricOffsetIn, juniDvmrpInterfaceAdminState } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of a DVMRP interface in a Juniper product. This group became obsolete when support for the DVMRP interface announce list name object was added." ::= { juniDvmrpGroups 3 } juniDvmrpSourceGroup OBJECT-GROUP OBJECTS { juniDvmrpPruneIIFIfIndex, juniDvmrpPruneUpTime, juniDvmrpSrcGrpOifOIFPruned, juniDvmrpSrcGrpOifOIFDnTTL } STATUS current DESCRIPTION "A collection of objects providing management of a DVMRP source group in a Juniper product." ::= { juniDvmrpGroups 4 } juniDvmrpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { juniDvmrpRouteHogNotificationTrap } STATUS current DESCRIPTION "A notification for signaling important DVMRP events." ::= { juniDvmrpGroups 5 } juniDvmrpBaseGroup2 OBJECT-GROUP OBJECTS { juniDvmrpAdminState, juniDvmrpMcastAdminState, juniDvmrpRouteHogNotification, juniDvmrpRouteLimit, juniDvmrpS32PrunesOnly, juniDvmrpUnicastRouting } STATUS current DESCRIPTION "A collection of objects providing basic management of DVMRP in a Juniper product." ::= { juniDvmrpGroups 6 } juniDvmrpInterfaceGroup2 OBJECT-GROUP OBJECTS { juniDvmrpLocalAddrMask, juniDvmrpSummaryAddrCost, juniDvmrpSummaryAddrStatus, juniDvmrpInterfaceAutoSummary, juniDvmrpInterfaceMetricOffsetOut, juniDvmrpInterfaceMetricOffsetIn, juniDvmrpInterfaceAdminState , juniDvmrpInterfaceAnnounceListName } STATUS current DESCRIPTION "A collection of objects providing management of a DVMRP interface in a Juniper product." ::= { juniDvmrpGroups 7 } END