-- ***************************************************************************** -- Juniper-SLEP-MIB -- -- Juniper Networks Enterprise MIB -- Serial Line Encapsulation Protocol MIB -- -- Copyright (c) 2000, 2001 Unisphere Networks, Inc. -- Copyright (c) 2002 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-SLEP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32 FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB juniMibs FROM Juniper-MIBs JuniNextIfIndex, JuniEnable FROM Juniper-TC; juniSlepMIBS MODULE-IDENTITY LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net" DESCRIPTION "The Serial Line Encapulation Protocol (SLEP) MIB for the Juniper Networks enterprise." -- Revision History REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200104031910Z" -- 03-Apr-01 03:10 PM EDT - JUNOSe 3.1 DESCRIPTION "Add juniSledDownWhenLooped attribute." REVISION "200001030000Z" -- 3-Jan-00 - JUNOSe 1.3 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 15 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniSlepObjects OBJECT IDENTIFIER ::= { juniSlepMIBS 1 } -- -- This MIB contains managed objects for the Serial Line Encapulation -- Protocol sublayer interface. -- -- Management objects are provided to query for an available -- interface index, and to create/delete interfaces of that type. -- Creating/deleting these interface types using this MIB has the -- side effect of creating/deleting corresponding entries in the -- Interface MIB ifTable/ifXTable, and in the Juniper Enterprise -- Interface MIB juniIfTable. -- juniSlepIfLayer OBJECT IDENTIFIER ::= { juniSlepObjects 1 } -- ////////////////////////////////////////////////////////////////////// -- -- Serial Line Encapulation Interface Layer -- -- This layer is managed with the following elements: -- -- o NextIfIndex (generator for SLEP Ifndex selection) -- o Interface Table (creation/configuration/deletion of SLEP interfaces) -- -- ////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new SLEP interfaces -- juniSlepNextIfIndex OBJECT-TYPE SYNTAX JuniNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in juniSlepIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously." ::= { juniSlepIfLayer 1 } -- -- The Slep Interface Table -- juniSlepIfTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniSlepIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters for the SLEP service on this interface." ::= { juniSlepIfLayer 2 } juniSlepIfEntry OBJECT-TYPE SYNTAX JuniSlepIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Parameters for a particular SLEP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable." INDEX { juniSlepIfIndex } ::= { juniSlepIfTable 1 } JuniSlepIfEntry ::= SEQUENCE { juniSlepIfIndex InterfaceIndex, juniSlepKeepAliveTimer INTEGER, juniSlepIfLowerIfIndex InterfaceIndexOrZero, juniSlepIfRowStatus RowStatus, juniSlepDownWhenLooped JuniEnable } juniSlepIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { juniSlepIfEntry 1 } juniSlepKeepAliveTimer OBJECT-TYPE SYNTAX INTEGER (0..6553) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The interface keep alive timer for this entry. The time in seconds that this entity will wait for sending a keep-alive-message to the remote SLEP entity, and the time in seconds that this entity will wait for the reception of a keep-alive-message from the remote SLEP entity." DEFVAL { 10 } ::= { juniSlepIfEntry 2 } juniSlepIfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of an interface over which this SLEP interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { juniSlepIfEntry 3 } juniSlepIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniSlepIfRowStatus juniSlepIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniSlepIfIndex must have been determined previously, by reading juniSlepNextIfIndex. The interface identified by juniSlepIfLowerIfIndex must exist, and must be an interface type that permits layering of SLEP Interface above it. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table." ::= { juniSlepIfEntry 4 } juniSlepDownWhenLooped OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-create STATUS current DESCRIPTION "The down-when-looped control for this entry. This attribute determines if loop detection is enabled for the interface. If set to disable, loop detection is disabled for the interface." DEFVAL { disable } ::= { juniSlepIfEntry 5 } -- -- The Slep Interface Statistics Table -- juniSlepIfStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniSlepIfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics for the SLEP service on this interface." ::= { juniSlepIfLayer 3 } juniSlepIfStatisticsEntry OBJECT-TYPE SYNTAX JuniSlepIfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics for a particular SLEP interface." INDEX { juniSlepIfStatsIndex } ::= { juniSlepIfStatisticsTable 1 } JuniSlepIfStatisticsEntry ::= SEQUENCE { juniSlepIfStatsIndex InterfaceIndex, juniSlepKeepAliveFailures Counter32, juniSlepLinkStatusTooLongPackets Counter32, juniSlepLinkStatusBadFCSs Counter32 } juniSlepIfStatsIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of that identifies this entry." ::= { juniSlepIfStatisticsEntry 1 } juniSlepKeepAliveFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link drops due to keep-alive failures." ::= { juniSlepIfStatisticsEntry 2 } juniSlepLinkStatusTooLongPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that were too long for this SLEP entity." ::= { juniSlepIfStatisticsEntry 3 } juniSlepLinkStatusBadFCSs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FCS's errors for this SLEP entity." ::= { juniSlepIfStatisticsEntry 4 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholders follow. -- juniSlepTrapControl OBJECT IDENTIFIER ::= { juniSlepMIBS 2 } -- juniSlepTraps OBJECT IDENTIFIER ::= { juniSlepMIBS 3 } -- juniSlepPrefix OBJECT IDENTIFIER ::= { juniSlepTraps 0 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniSlepConformance OBJECT IDENTIFIER ::= { juniSlepMIBS 4 } juniSlepCompliances OBJECT IDENTIFIER ::= { juniSlepConformance 1 } juniSlepGroups OBJECT IDENTIFIER ::= { juniSlepConformance 2 } -- -- compliance statements -- juniSlepCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper SLEP MIB. This compliance statement became obsolete when the juniSlepDownWhenLooped object was added." MODULE -- this module MANDATORY-GROUPS { juniSlepGroup } ::= { juniSlepCompliances 1 } -- JUNOSe 1.3 juniSlepCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper SLEP MIB." MODULE -- this module MANDATORY-GROUPS { juniSlepGroup2 } ::= { juniSlepCompliances 2 } -- JUNOSe 3.1 -- -- units of conformance -- juniSlepGroup OBJECT-GROUP OBJECTS { juniSlepNextIfIndex, juniSlepKeepAliveTimer, juniSlepIfLowerIfIndex, juniSlepIfRowStatus, juniSlepKeepAliveFailures, juniSlepLinkStatusTooLongPackets, juniSlepLinkStatusBadFCSs } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of SLEP interfaces in a Juniper product. This group became obsolete when the juniSlepDownWhenLooped object was added." ::= { juniSlepGroups 1 } juniSlepGroup2 OBJECT-GROUP OBJECTS { juniSlepNextIfIndex, juniSlepKeepAliveTimer, juniSlepIfLowerIfIndex, juniSlepIfRowStatus, juniSlepDownWhenLooped, juniSlepKeepAliveFailures, juniSlepLinkStatusTooLongPackets, juniSlepLinkStatusBadFCSs } STATUS current DESCRIPTION "A collection of objects providing management of SLEP interfaces in a Juniper product." ::= { juniSlepGroups 2 } END