-- ***************************************************************************** -- Juniper-SNMP-MIB -- -- Juniper Networks Enterprise MIB -- SNMP MIB -- -- Copyright (c) 1998, 1999 Redstone Communications, Inc. -- Copyright (c) 2000, 2001 Unisphere Networks, Inc. -- Copyright (c) 2002, 2004 Juniper Networks, Inc. -- Copyright (c) 2005, 2006 Juniper Networks, Inc. -- Copyright (c) 2007, 2008 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-SNMP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, IpAddress, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB JuniEnable FROM Juniper-TC juniMibs FROM Juniper-MIBs; juniSnmpMIB MODULE-IDENTITY LAST-UPDATED "200809300659Z" -- 30-Sep-08 12:29 PM EST ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "MIB objects for configuring SNMP-based management access into Juniper E-series products." -- Revision History REVISION "200809300659Z" -- 30-Sep-08 12:29 PM EST - JUNOSe 10.2 DESCRIPTION "Added juniSnmpIntfCompTable. This provides option for interface compression based on table type. The behavior of juniSnmpInterfaceCompress scalars get modified becuase of this." REVISION "200804031029Z" -- 03-Apr-08 03:59 PM EST - JUNOSe 9.3 DESCRIPTION "Added juniSnmpTrapSeverityFilterTable. Added support for more traps in JuniSnmpTrapMask textual convention." REVISION "200609180809Z" -- 18-Sep-06 04:09 AM EDT - JUNOSe 8.2 DESCRIPTION "Added support for mrouter Traps." REVISION "200604261349Z" -- 26-Apr-06 09:49 AM EDT - JUNOSe 8.1 DESCRIPTION "Updated JuniSnmpTrapMask textual convention to support 64 trap categories." REVISION "200601010000Z" -- 01-Jan-06 00:00 AM EDT - JUNOSe 7.3 DESCRIPTION "Added support for DOS Protection Traps." REVISION "200506231349Z" -- 23-Jun-05 09:49 AM EDT - JUNOSe 7.2 DESCRIPTION "Added support for dynamic SNMP MIB views and secure traps." REVISION "200505122153Z" -- 12-May-05 05:53 PM EDT - JUNOSe 7.1 DESCRIPTION "RLI 1925: Added support for ip traps." REVISION "200406231349Z" -- 23-Jun-04 09:49 AM EDT - JUNOSe 6.1 DESCRIPTION "RLI 1684: Added support for route table traps." REVISION "200401051609Z" -- 05-Jan-04 11:09 AM EST - JUNOSe 5.3 DESCRIPTION "Added support for DHCP traps." REVISION "200312101500Z" -- 10-Dec-03 10:00 AM EST - JUNOSe 5.1 DESCRIPTION "Added juniSnmpManagementApplicationTable and juniSnmpAccessPermission. Added support for PIM and Disman Event traps." REVISION "200302052224Z" -- 05-Feb-03 05:24 PM EST - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200211201440Z" -- 20-Nov-02 09:40 AM EST - JUNOSe 4.1 DESCRIPTION "Added support for SONET layer, NTP and RADIUS client traps. Added support for ping time window and notification log data inclusion in trap varbinds." REVISION "200208152018Z" -- 15-Aug-02 04:18 PM EDT - JUNOSe 4.0 DESCRIPTION "Added support for SNMPv3 trap." REVISION "200208141909Z" -- 14-Aug-02 03:09 PM EDT - JUNOSe 3.4 DESCRIPTION "Added support for proxy enable/disable feature. Added support for the VRRP trap catagory." REVISION "200111071709Z" -- 07-Nov-01 12:09 PM EST - JUNOSe 3.3 DESCRIPTION "Added support for interface compress. New textual convention: JuniSnmpIntfCompRestrictedMask New objects: juniSnmpIntfCompCompressed juniSnmpIntfCompEnhanced juniSnmpIntfCompEnhancedDisplay juniSnmpIntfCompRestricted juniSnmpIntfCompRestrictedDisplay Obsoleted object: juniSnmpInterfaceMode Added support for trap severities and trap severity filtering at the global and host levels. New textual convention: JuniTrapSeverity New objects: juniSnmpTrapHostDiscards juniSnmpTrapHostSeverityFilter juniSnmpTrapTrapSeverity juniSnmpTrapGlobalDiscards juniSnmpTrapGlobalSeverityFilter" REVISION "200111071500Z" -- 07-Nov-01 10:00 AM EST - JUNOSe 3.2 DESCRIPTION "Added support for DVMRP and local address pool and ATM ping trap categories." REVISION "200105081206Z" -- 08-May-01 08:06 AM EDT - JUNOSe 3.0 DESCRIPTION "Make it SMIv2 conformant." REVISION "200008020000Z" -- 2-Aug-00 - JUNOSe 2.3 DESCRIPTION "Added juniSnmpInterfaceMode." REVISION "200005090000Z" -- 9-May-00 - JUNOSe 2.0 DESCRIPTION "Added View support. Added Named Access List support." REVISION "9902170000Z" -- 17-Feb-99 - JUNOSe 1.0 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 16 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ JuniSnmpCommunityName ::= TEXTUAL-CONVENTION DISPLAY-HINT "31a" STATUS current DESCRIPTION "An SNMP community name. Represents textual information taken from the NVT ASCII character set. The character repertoire of the string is restricted to printable, non-whitespace characters (codes 33 through 126)." REFERENCE "RFC 854: NVT ASCII character set." SYNTAX OCTET STRING (SIZE(1..31)) JuniSnmpAccessListName ::= TEXTUAL-CONVENTION DISPLAY-HINT "31a" STATUS current DESCRIPTION "An IP Access List name. Represents textual information taken from the NVT ASCII character set. The character repertoire of the string is restricted to printable, non-whitespace characters (codes 33 through 126)." REFERENCE "RFC 854: NVT ASCII character set." SYNTAX OCTET STRING (SIZE(0..31)) JuniSnmpTrapMask ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This octet string is interpreted as a bit mask, in which each bit corresponds to a category of SNMP trap. Bit definitions are as follows, where bit 63 is the most significant bit of the first octet, and bit 0 is the least significant bit of the eighth octet: Bit Category ----- ----------------------------------------------- 0 SNMP standard coldStart/warmStart/authenticationFailure traps 1 Standard linkUp/linkDown traps 2 Platform inventory traps 3 Environment (power, temperature, fan and memory) traps 4 Accounting (bulk statistics) traps 5 File transfer status trap 6 BGP traps 7 Log configuration traps 8 CLI security alert trap 9 Ping traps 10 OSPF traps 11 TraceRoute traps 12 Standard DVMRP traps 13 Proprietary DVMRP trap 14 Local address pool traps 15 ATM ping traps 16 VRRP traps 17 SONET layer traps 18 NTP traps 19 Radius clients trap 20 DisMan Event traps 21 DHCP traps 22 PIM traps 23 High Availability Redundancy traps 24 Route Table traps 25 IP Traps 26 Mirror Traps 27 Vpn Traps 28 Bfd Traps 29 Dos Protection Platform Traps 30 Mrouter Traps 31 Ldp Traps 32 Mobile IPv4 Traps 33 ISSU Traps 34-63 Undefined." SYNTAX OCTET STRING (SIZE(8)) JuniTrapSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The set of trap severity values: trapEmergency(0) - system is unusable trapAlert(1) - action must be taken immediately trapCritical(2) - critical conditions trapError(3) - error conditions trapWarning(4) - warning conditions trapNotice(5) - normal but significant condition trapInformational(6) - informational messages trapDebug(7) - debug-level messages " SYNTAX INTEGER { trapEmergency(0), trapAlert(1), trapCritical(2), trapError(3), trapWarning(4), trapNotice(5), trapInformational(6), trapDebug(7) } JuniSnmpIntfCompRestrictedMask ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This octet string is interpreted as a bit mask, in which each bit corresponds to an interface restriction. The DESCRIPTION clause of a MIB object having this SYNTAX should specify the semantics of bit values '1' and '0'. Bit definitions are as follows, where bit 31 is the most significant bit of the first octet, and bit 0 is the least significant bit of the fourth octet: Bit interface restriction ----- ----------------------------------------------- 0 ifAdminStatus Down 1-31 Undefined." SYNTAX OCTET STRING (SIZE(4)) JuniSnmpManagementApplicationIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifies a management application: eventMgr - disman event MIB application " SYNTAX INTEGER { eventMgr(1) } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- MIB Structure -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniSnmpObjects OBJECT IDENTIFIER ::= { juniSnmpMIB 1 } juniSnmpConformance OBJECT IDENTIFIER ::= { juniSnmpMIB 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- -- Object Groups -- juniSnmpGeneral OBJECT IDENTIFIER ::= { juniSnmpObjects 1 } juniSnmpInterfaceCompress OBJECT IDENTIFIER ::= { juniSnmpGeneral 3 } juniSnmpCommunity OBJECT IDENTIFIER ::= { juniSnmpObjects 2 } juniSnmpTrap OBJECT IDENTIFIER ::= { juniSnmpObjects 3 } juniSnmpAuthFailId OBJECT IDENTIFIER ::= { juniSnmpObjects 4 } -- -- General objects -- juniSnmpMaxPduSize OBJECT-TYPE SYNTAX Integer32 (484..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum sized SNMP PDU, in bytes, that this agent is capable of handling. The default is 1500 bytes. The possibility of IP fragmentation should be considered when setting this object to large values." ::= { juniSnmpGeneral 1 } juniSnmpInterfaceMode OBJECT-TYPE SYNTAX INTEGER { verbose(1), compress(2), enhanced(3) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The interface table mode for the SNMP agent(s) associated with this system. verbose(1) - the standard ifTable, ifXTable and ifStackTable contain entries for every standard and proprietary interface type supported by this system. compress(2) - the standard ifTable, ifXTable and ifStackTable contain a subset of interface types. Certain interface types like HDLC and IP and others are excluded from the standard tables but are manageable from proprietary MIBs. enhanced(3) - the standard ifTable, ifXTable and ifStackTable contain a subset of interface types. Enhanced mode cannot by configured at this time via SNMP. Attempts to set this value will fail. This object became obsolete when individual objects were added for each mode." ::= { juniSnmpGeneral 2 } juniSnmpProxyStatus OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable SNMP proxy between virtual routers." DEFVAL { enable } ::= { juniSnmpGeneral 4 } juniSnmpAccessPermission OBJECT-TYPE SYNTAX INTEGER { noAccess(1), readAccess(2), readWriteAccess(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The access permission to the MIB objects of this SNMP agent. noAccess - No access permission granted. readAccess - Read access permission granted. readWriteAccess - Read and write access permission granted." DEFVAL { noAccess } ::= { juniSnmpGeneral 5 } juniSnmpIntfCompCompressed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1) - the standard ifTable, ifXTable and ifStackTable contain a subset of interface types. Certain interface types like HDLC and IP and others are excluded from the standard tables but are manageable from proprietary MIBs. false(2) - the standard ifTable, ifXTable and ifStackTable contain entries for every standard and proprietary interface type supported by this system. This configuration is applicable to all interface related tables until interface compression based on interface table-types is applied. If interface table-type based compression is applied, get operation on this object will correspond only to ifTable/ifXTable/juniIfTable and set operation on this object will fail." DEFVAL { false } ::= { juniSnmpInterfaceCompress 1 } juniSnmpIntfCompEnhanced OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object governs which interface types are visible to SNMP management clients that use the standard ifTable, ifXTable and ifStackTable. The object is a variable length octet string that is interpreted as a bit mask. Each bit respresents a specific Juniper interface type that can be included or excluded in the standard interface tables. For each bit position in each octet of the string, a '1' or '0' indicates the corresponding interface type is either removed (compressed) from the standard interface MIB tables, or included respectively. Individual bit definitions follow the JuniIfType convention defined in the Juniper-UNI-IF-MIB. For example, ip(0) and ppp(1) correspond to bit definitions 0 and 1 respectively. In each octet, bit 0 is least significant, bit 7 most significant. This configuration is applicable to all interface related tables until interface compression based on interface table-types is applied. If interface table-type based compression is applied, get operation on this object will correspond only to ifTable/ifXTable/juniIfTable and set operation on this object will fail." REFERENCE "Juniper-UNI-IF-MIB.JuniIfType" ::= { juniSnmpInterfaceCompress 2 } juniSnmpIntfCompEnhancedDisplay OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1000)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the excluded interface types in human readable form. Three dots (...) at the end of display string indicates that the output has been truncated. The syntax rules are the same as for SNMP-FRAMEWORK-MIB.SnmpAdminString, except for the size constraint. This configuration is applicable to all interface related tables until interface compression based on interface table-types is applied. If interface table-type based compression is applied, this object will be applicable only to ifTable/ifXTable/juniIfTable." ::= { juniSnmpInterfaceCompress 3 } juniSnmpIntfCompRestricted OBJECT-TYPE SYNTAX JuniSnmpIntfCompRestrictedMask MAX-ACCESS read-write STATUS current DESCRIPTION "This object governs which interface instances appear to SNMP management clients that use the standard ifTable, ifXTable and ifStackTable. The control is based on a set of interface restrictions defined by JuniSnmpInterfaceModeRestrictedMask. For each bit position in each octet of the string, a '1' or '0' controls whether an interface instance that matches the restriction is removed or included in the standard interface MIB tables. For example, setting the value of this object to 1 will remove all interface instances with an ifAdminStatus of down(2). In each octet, bit 0 is least significant, bit 7 most significant." ::= { juniSnmpInterfaceCompress 4 } juniSnmpIntfCompRestrictedDisplay OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the restrictions in human readable form. Three dots (...) at the end of display string indicates that the output has been truncated." ::= { juniSnmpInterfaceCompress 5 } juniSnmpIntfCompTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniSnmpIntfCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains enhanced compression bitmask based on table-type." ::= { juniSnmpInterfaceCompress 6 } juniSnmpIntfCompEntry OBJECT-TYPE SYNTAX JuniSnmpIntfCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a table type for which interface compression mask is applied." INDEX { juniSnmpIntfCompTableType } ::= { juniSnmpIntfCompTable 1 } JuniSnmpIntfCompEntry ::= SEQUENCE { juniSnmpIntfCompTableType INTEGER, juniSnmpIntfCompEntryCompressed TruthValue, juniSnmpIntfCompMask OCTET STRING, juniSnmpIntfCompMaskDisplay OCTET STRING } juniSnmpIntfCompTableType OBJECT-TYPE SYNTAX INTEGER { others (0), ifTables(1), ifStackTables(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "SNMP interface tables for which interface compression bitmask will be applicable. Supported values are: others : All the other interface related tables except ifTables and ifStackTables. Currently only ipNetToMediaTable is supported. ifTables : It consists of ifTable, ifXTable and juniIfTable. ifStackTables : It consists of ifStackTable, ifInvStackTable and juniIfInvStackTable. " ::= { juniSnmpIntfCompEntry 1 } juniSnmpIntfCompEntryCompressed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1) - the standard ifTable, ifXTable and ifStackTable contain a subset of interface types. Certain interface types like HDLC and IP and others are excluded from the standard tables but are manageable from proprietary MIBs. false(2) - the standard ifTable, ifXTable and ifStackTable contain entries for every standard and proprietary interface type supported by this system." DEFVAL { false } ::= { juniSnmpIntfCompEntry 2 } juniSnmpIntfCompMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object governs which interface types are visible to SNMP management clients. The object is a variable length octet string that is interpreted as a bit mask. Each bit respresents a specific Juniper interface type that can be included or excluded in the standard interface tables. For each bit position in each octet of the string, a '1' or '0' indicates the corresponding interface type is either filtered (compressed) from the interface MIB tables, or included respectively. Individual bit definitions follow the JuniIfType convention defined in the Juniper-UNI-IF-MIB. For example, ip(0) and ppp(1) correspond to bit definitions 0 and 1 respectively. In each octet, bit 0 is least significant, bit 7 most significant." REFERENCE "Juniper-UNI-IF-MIB.JuniIfType" ::= { juniSnmpIntfCompEntry 3 } juniSnmpIntfCompMaskDisplay OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1000)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the excluded interface types in human readable form. Three dots (...) at the end of display string indicates that the output has been truncated. The syntax rules are the same as for SNMP-FRAMEWORK-MIB.SnmpAdminString, except for the size constraint." ::= { juniSnmpIntfCompEntry 4 } -- -- The Management Application Table -- juniSnmpManagementApplicationTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniSnmpManagementApplicationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for each management application supported by the router entry created in the juniRouterTable." ::= { juniSnmpGeneral 6 } juniSnmpManagementApplicationEntry OBJECT-TYPE SYNTAX JuniSnmpManagementApplicationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry provides administrative control on a management application for the router designated by the first indice to this table. The second indice identifies the router management application. Entries in this table are created as a side-effect of row creation in the juniRouterTable." INDEX { juniSnmpManagementApplicationRouterIndex, juniSnmpManagementApplicationIndex } ::= { juniSnmpManagementApplicationTable 1 } JuniSnmpManagementApplicationEntry ::= SEQUENCE { juniSnmpManagementApplicationRouterIndex Unsigned32, juniSnmpManagementApplicationIndex JuniSnmpManagementApplicationIndex, juniSnmpManagementApplicationRowStatus RowStatus } juniSnmpManagementApplicationRouterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The routerIndex of this router. This object is the same as the juniRouterIndex object defined in the juniRouterTable." ::= { juniSnmpManagementApplicationEntry 1 } juniSnmpManagementApplicationIndex OBJECT-TYPE SYNTAX JuniSnmpManagementApplicationIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identities the management application." ::= { juniSnmpManagementApplicationEntry 2 } juniSnmpManagementApplicationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported." ::= { juniSnmpManagementApplicationEntry 3 } -- -- SNMP Community Objects -- juniSnmpCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniSnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SNMP management clients. Authentic SNMP clients are identified by a combination community name and IP address. Upon receipt of an SNMP request, this table is scanned for a matching community name. If an entry containing a matching community name is found, the entry's IP access list, if nonzero, is used to validate the source IP address received in the request; else, if the IP access list number in the matching entry is zero, the source IP address is accepted. Finally, the type of SNMP request is validated with respect to the access privilege of the matching entry (e.g. a SET Request is rejected for an entry having read-only privilege). Use of this table constitutes 'trivial authentication', i.e., no mechanism is employed to confirm the received SNMP request was indeed originated by the host identified by the IP source address." ::= { juniSnmpCommunity 1 } juniSnmpCommunityEntry OBJECT-TYPE SYNTAX JuniSnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry describing an authentic SNMP Community." INDEX { IMPLIED juniSnmpCommunityName } ::= { juniSnmpCommunityTable 1 } JuniSnmpCommunityEntry ::= SEQUENCE { juniSnmpCommunityName JuniSnmpCommunityName, juniSnmpCommunityRowStatus RowStatus, juniSnmpCommunityPrivilege INTEGER, juniSnmpCommunityAccessList Integer32, juniSnmpCommunityAccessListName JuniSnmpAccessListName, juniSnmpCommunityView SnmpAdminString } juniSnmpCommunityName OBJECT-TYPE SYNTAX JuniSnmpCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "An SNMP community name." ::= { juniSnmpCommunityEntry 1 } juniSnmpCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported." ::= { juniSnmpCommunityEntry 2 } juniSnmpCommunityPrivilege OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(2), admin(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The access privilege for an SNMP Community authenticated by this entry (used in conjunction with MIB view as specified via juniSnmpCommunityView). readOnly Read-only access to MIB with associated view. readWrite Read-write access to MIB with associated view. admin Read-write access to entire MIB (for backward compatibility, automatically defaults to 'everything' view and 'readWrite' privilege)." DEFVAL { readOnly } ::= { juniSnmpCommunityEntry 3 } juniSnmpCommunityAccessList OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "If nonzero, the number of an IP access list that describes the IP hosts permitted SNMP management access to this device via the corresponding community name contained in this entry." ::= { juniSnmpCommunityEntry 4 } juniSnmpCommunityAccessListName OBJECT-TYPE SYNTAX JuniSnmpAccessListName MAX-ACCESS read-create STATUS current DESCRIPTION "If not null, the name of an IP access list that describes the IP hosts permitted SNMP management access to this device via the corresponding community name contained in this entry." ::= { juniSnmpCommunityEntry 5 } juniSnmpCommunityView OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The view associated with an SNMP Community authenticated by this entry. Following is the list of built-in system views. everything Access to the entire MIB except packet mirror MIB. user Access to non-administrative portions of MIB. nothing No access. mirrorAdmin Access to packet mirror MIB. 'Administrative' portions of the MIB are those portions that pertain to management access into the managed device. Administrator can also create a new SNMP MIB view dynamically and assign it to community entry. Access to packet mirror MIB is only thorugh 'mirrorAdmin' view. A community with 'mirrorAdmin' view can be configure only through CLI administrator with mirror configuration privileges." DEFVAL { "user" } ::= { juniSnmpCommunityEntry 6 } -- -- SNMP Trap Filter Objects -- juniSnmpTrapGlobalFilter OBJECT-TYPE SYNTAX JuniSnmpTrapMask MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides global control over trap generation by this agent. For each bit position, a '1' or '0' indicates the corresponding trap category is enabled or disabled, respectively. For security reasons, ‘Mirror’ category will not be allowed to be configured through SNMP." ::= { juniSnmpTrap 1 } juniSnmpTrapSource OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex of the interface whose IP address is used as the source IP address for outbound SNMP traps. If zero, no interface is specified, the mechanism for selecting a source IP address is implementation-dependent, and may vary with each trap sent." ::= { juniSnmpTrap 2 } juniSnmpTrapHostTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniSnmpTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SNMP Trap recipient." ::= { juniSnmpTrap 3 } juniSnmpTrapHostEntry OBJECT-TYPE SYNTAX JuniSnmpTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry describing an SNMP Trap recipient." INDEX { juniSnmpTrapHostIpAddress } ::= { juniSnmpTrapHostTable 1 } JuniSnmpTrapHostEntry ::= SEQUENCE { juniSnmpTrapHostIpAddress IpAddress, juniSnmpTrapHostRowStatus RowStatus, juniSnmpTrapHostUdpPort Integer32, juniSnmpTrapHostCommunity JuniSnmpCommunityName, juniSnmpTrapHostProtocolVersion INTEGER, juniSnmpTrapHostFilter JuniSnmpTrapMask, juniSnmpTrapHostSends Counter32, juniSnmpTrapHostDiscards Counter32, juniSnmpTrapHostSeverityFilter JuniTrapSeverity, juniSnmpTrapHostPingTimeOut Integer32, juniSnmpTrapHostIncludeLogVarbinds TruthValue, juniSnmpTrapHostQueueSize Integer32, juniSnmpTrapHostQueueDrainRate Integer32, juniSnmpTrapHostQueueFull INTEGER, juniSnmpTrapHostBadEncodingDiscards Counter32, juniSnmpTrapHostQueueFullDiscards Counter32, juniSnmpTrapHostNoResponseDiscards Counter32 } juniSnmpTrapHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of an authorized SNMP Trap recipient. This must be a host IP address." ::= { juniSnmpTrapHostEntry 1 } juniSnmpTrapHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported." ::= { juniSnmpTrapHostEntry 2 } juniSnmpTrapHostUdpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP port to which traps will be sent." DEFVAL { 162 } -- default UDP port for SNMP traps ::= { juniSnmpTrapHostEntry 3 } juniSnmpTrapHostCommunity OBJECT-TYPE SYNTAX JuniSnmpCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "An SNMP community name to be used in traps sent to this destination." ::= { juniSnmpTrapHostEntry 4 } juniSnmpTrapHostProtocolVersion OBJECT-TYPE SYNTAX INTEGER { v1(0), v2c(1), v3(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The format of the SNMP trap PDU to be sent to this trap destination. v1 Trap-PDU defined in RFC1157, encapsulated in the message structure also defined in RFC1157. v2c SNMPv2-Trap-PDU defined in RFC1905, encapsulated in the message structure defined in RFC1901. v3 SNMPv2-Trap-PDU defined in RFC1905, encapsulated in the message structure defined in RFC2571." DEFVAL { v1 } ::= { juniSnmpTrapHostEntry 5 } juniSnmpTrapHostFilter OBJECT-TYPE SYNTAX JuniSnmpTrapMask MAX-ACCESS read-create STATUS current DESCRIPTION "Bit mask designating the specific trap types enabled for transmission to this trap destination. For each bit position, a '1' or '0' indicates the corresponding trap type is enabled or disabled, respectively. For security reasons, ‘Mirror’ category will not be allowed to be configured through SNMP. Note, trap generation is further constrained by the value juniSnmpTrapGlobalFilter." ::= { juniSnmpTrapHostEntry 6 } juniSnmpTrapHostSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of traps submitted for transmission to this destination." ::= { juniSnmpTrapHostEntry 7 } juniSnmpTrapHostDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded. A trap may be discarded because the trap type is either not a configured type in juniSnmpTrapHostFilter, or because the traps's priority is below the minimum trap severity filter defined by juniSnmpTrapHostSeverityFilter." ::= { juniSnmpTrapHostEntry 8 } juniSnmpTrapHostSeverityFilter OBJECT-TYPE SYNTAX JuniTrapSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum severity value an snmp trap must have in order to be forwarded to this host." ::= { juniSnmpTrapHostEntry 9 } juniSnmpTrapHostPingTimeOut OBJECT-TYPE SYNTAX Integer32 (0..90) UNITS "Minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum ping time window that this host gets pinged repeatedly." DEFVAL { 1 } ::= { juniSnmpTrapHostEntry 10 } juniSnmpTrapHostIncludeLogVarbinds OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The configuration setting for snmp trap message content. Enabling this management object configures the associated SNMP agent to include notification log name and the corresponding log index as part of the trap messages sent to this host." DEFVAL { false } ::= { juniSnmpTrapHostEntry 11 } juniSnmpTrapHostQueueSize OBJECT-TYPE SYNTAX Integer32 (32..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of traps to be kept in the queue." DEFVAL { 32 } ::= { juniSnmpTrapHostEntry 12 } juniSnmpTrapHostQueueDrainRate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of traps per second to be sent to the host. Zero value indicates that there is no control over queue drain rate." DEFVAL { 0 } ::= { juniSnmpTrapHostEntry 13 } juniSnmpTrapHostQueueFull OBJECT-TYPE SYNTAX INTEGER { dropLastIn(0), dropFirstIn(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the method for handling Queue-Full condition. dropLastIn -- When queue is full the most recent trap will be dropped. dropFirstIn -- When queue is full the oldest trap in the queue will be dropped." DEFVAL { dropLastIn } ::= { juniSnmpTrapHostEntry 14 } juniSnmpTrapHostBadEncodingDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded due to bad encoding." ::= { juniSnmpTrapHostEntry 15 } juniSnmpTrapHostQueueFullDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded due to the queue being full." ::= { juniSnmpTrapHostEntry 16 } juniSnmpTrapHostNoResponseDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded due to host not being available (not responding to the pings)." ::= { juniSnmpTrapHostEntry 17 } juniSnmpTrapProxy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration setting for snmp trap proxying. Enabling this management object configures the associated SNMP agent to proxy internally generated traps. Note that some implementations may support a single snmp trap proxy per system." ::= { juniSnmpTrap 4 } juniSnmpTrapTrapSeverity OBJECT-TYPE SYNTAX JuniTrapSeverity MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The severity level of the trap." ::= { juniSnmpTrap 5 } juniSnmpTrapGlobalDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded. A trap may be discarded because the trap type is either not globally configured in juniSnmpTrapGlobalFilter, or because the traps's priority is below the minimum trap severity filter defined by juniSnmpTrapGlobalSeverityFilter." ::= { juniSnmpTrap 6 } juniSnmpTrapGlobalSeverityFilter OBJECT-TYPE SYNTAX JuniTrapSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Traps flow through two levels of filtering: global and then host. The value of this object defines the global minimum severity level a trap must have in order to be forwarded to the host level trap processing. A trap will be discarded and counted in juniSnmpTrapGlobalDiscards if its severity level is less then the value of this object." ::= { juniSnmpTrap 7 } juniSnmpTrapTotalTrapsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of trap requests that this agent has received. Includes local submitted traps and proxied traps from other agents if this agent is the proxy agent." ::= { juniSnmpTrap 8 } juniSnmpTrapLocalTrapsSubmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local traps submitted to this agent." ::= { juniSnmpTrap 9 } juniSnmpTrapProxyTrapsSubmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of proxied traps submitted to this agent." ::= { juniSnmpTrap 10 } juniSnmpTrapTotalTrapsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of proxy traps submitted to this agent." ::= { juniSnmpTrap 11 } juniSnmpTrapNoMemoryDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded due to lack of system memory." ::= { juniSnmpTrap 12 } juniSnmpTrapNoQueueResourceDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded due to no queue resources. A trap may be discarded because the agent request queue is full juniSnmpTrapRequestQueueCongestionDiscards or the proxy agent reuest queue is full juniSnmpTrapProxyRequestQueueCongestion." ::= { juniSnmpTrap 13 } juniSnmpTrapAgentSnmpNotAbleDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of trap requests that were discarded due to SNMP agent being disabled." ::= { juniSnmpTrap 14 } juniSnmpTrapTotalTrapsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of trap requests sent to every host that is configured to receive traps from this agent." ::= { juniSnmpTrap 15 } juniSnmpTrapTotalProxyOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of trap requests sent to proxy virtual router." ::= { juniSnmpTrap 16 } juniSnmpTrapSeverityFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniSnmpTrapSeverityFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SNMP trap Severity filter." ::= { juniSnmpTrap 17 } juniSnmpTrapSeverityFilterEntry OBJECT-TYPE SYNTAX JuniSnmpTrapSeverityFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry specifying the trap severity filter for a particular trap category." INDEX { juniSnmpTrapCategory } ::= { juniSnmpTrapSeverityFilterTable 1 } JuniSnmpTrapSeverityFilterEntry ::= SEQUENCE { juniSnmpTrapCategory Integer32, juniSnmpTrapSeverityFilter JuniTrapSeverity } juniSnmpTrapCategory OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object is an integer which is same as the bit position specified for a particular trap category in JuniSnmpTrapMask. For example, value of juniSnmpTrapCategory object will be 6 for BGP traps." ::= { juniSnmpTrapSeverityFilterEntry 1 } juniSnmpTrapSeverityFilter OBJECT-TYPE SYNTAX JuniTrapSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Traps flow through two levels of filtering: severity of a particular trap category and trap destination. If the severity of a particular category is not defined, global trap severity is used for computation. The value of this object defines trap-category based minimum severity level, a trap must have in order to be forwarded for the destination level trap filtering. A trap will be discarded and counted in juniSnmpTrapGlobalDiscards if its severity level is less than the value of this object. For security reasons, ‘Mirror’ category will not be allowed to be configured through SNMP. Only those trap categories which are configured using per category based trap severity filter are displayed as part of this table. If the value of juniSnmpTrapGlobalSeverityFilter is modified, it will overwrite all the values specified in this table." ::= { juniSnmpTrapSeverityFilterEntry 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Traps & Trap Control -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- -- No traps are defined in this MIB. -- -- SNMP authentication failures can cause the SNMP standard -- 'authenticationFailure' trap to be generated. This trap and -- its associated control object are defined in SNMPv2-MIB (RFC 1907). -- The following objects are included in that trap to identify the -- host that failed authentication. -- juniSnmpAuthFailIdIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The source IP address contained in a received SNMP request that failed authentication." ::= { juniSnmpAuthFailId 1 } juniSnmpAuthFailIdUdpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The source UDP port contained in a received SNMP request that failed authentication." ::= { juniSnmpAuthFailId 2 } juniSnmpAuthFailIdCommunity OBJECT-TYPE SYNTAX OCTET STRING -- no defined limit on SIZE MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SNMP community contained in a received SNMP request that failed authentication." ::= { juniSnmpAuthFailId 3 } juniSnmpAuthFailIdReason OBJECT-TYPE SYNTAX INTEGER { other(0), badCommunityName(1), badCommmunityUse(2), hostDenied(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason a received SNMP request failed authentication: other Unspecified reason. badCommunityName The community is not recognized. badCommunityUse The community does not have privilege for the SNMP request type (e.g. SET request with a community having read-only privilege). hostDenied The host IP address was denied by the community's associated access list." ::= { juniSnmpAuthFailId 4 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniSnmpCompliances OBJECT IDENTIFIER ::= { juniSnmpConformance 1 } juniSnmpGroups OBJECT IDENTIFIER ::= { juniSnmpConformance 2 } -- -- compliance statements -- juniSnmpCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when View support and Named Access List support were added." MODULE -- this module MANDATORY-GROUPS { juniSnmpGroup, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 1 } -- JUNOSe 1.0 juniSnmpCompliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when juniSnmpInterfaceMode was added." MODULE -- this module MANDATORY-GROUPS { juniSnmpGroup2, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 2 } -- JUNOSe 2.0 juniSnmpCompliance3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when support for interface compress, trap severities and trap severity filtering was added and juniSnmpInterfaceMode was obsoleted." MODULE -- this module MANDATORY-GROUPS { juniSnmpGroup3, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 3 } -- JUNOSe 2.3 juniSnmpCompliance4 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when trap proxy enable/disable support was added." MODULE -- this module MANDATORY-GROUPS { juniSnmpGeneralGroup, juniSnmpAccessGroup, juniSnmpTrapGroup, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 4 } -- JUNOSe 3.3 juniSnmpCompliance5 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when support was added for ping time window and notification log data inclusion in trap varbinds." MODULE -- this module MANDATORY-GROUPS { juniSnmpGeneralGroup2, juniSnmpAccessGroup, juniSnmpTrapGroup, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 5 } -- JUNOSe 3.4 juniSnmpCompliance6 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when support was added for access permission and management application table." MODULE -- this module MANDATORY-GROUPS { juniSnmpGeneralGroup2, juniSnmpAccessGroup, juniSnmpTrapGroup2, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 6 } -- JUNOSe 4.1 juniSnmpCompliance7 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when support was added for trap severity filter table." MODULE -- this module MANDATORY-GROUPS { juniSnmpGeneralGroup3, juniSnmpAccessGroup, juniSnmpTrapGroup2, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 7 } -- JUNOSe 5.1 juniSnmpCompliance8 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Juniper SNMP MIB. This statement became obsolete when support was added for table type based interface compression." MODULE -- this module MANDATORY-GROUPS { juniSnmpGeneralGroup3, juniSnmpAccessGroup, juniSnmpTrapGroup3, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 8 } -- JUNOSe 9.3 juniSnmpCompliance9 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper SNMP MIB." MODULE -- this module MANDATORY-GROUPS { juniSnmpGeneralGroup4, juniSnmpAccessGroup, juniSnmpTrapGroup3, juniSnmpAuthFailGroup } ::= { juniSnmpCompliances 9 } -- JUNOSe 10.2 -- -- units of conformance -- juniSnmpGroup OBJECT-GROUP OBJECTS { -- General objects juniSnmpMaxPduSize, -- Manager objects juniSnmpCommunityName, juniSnmpCommunityRowStatus, juniSnmpCommunityPrivilege, juniSnmpCommunityAccessList, -- Trap objects juniSnmpTrapGlobalFilter, juniSnmpTrapSource, juniSnmpTrapProxy, juniSnmpTrapHostIpAddress, juniSnmpTrapHostRowStatus, juniSnmpTrapHostUdpPort, juniSnmpTrapHostCommunity, juniSnmpTrapHostProtocolVersion, juniSnmpTrapHostFilter, juniSnmpTrapHostSends } STATUS obsolete DESCRIPTION "Obsolete collection of management objects pertaining to SNMP Agent capability in a Juniper product. This group became obsolete when View support and Named Access List support were added." ::= { juniSnmpGroups 1 } -- JUNOSe 1.0 juniSnmpAuthFailGroup OBJECT-GROUP OBJECTS { juniSnmpAuthFailIdIpAddress, juniSnmpAuthFailIdUdpPort, juniSnmpAuthFailIdCommunity, juniSnmpAuthFailIdReason } STATUS current DESCRIPTION "A collection of management objects pertaining to an SNMP authentication failure in a Juniper product." ::= { juniSnmpGroups 2 } -- JUNOSe 1.0 juniSnmpGroup2 OBJECT-GROUP OBJECTS { -- General objects juniSnmpMaxPduSize, -- Manager objects juniSnmpCommunityName, juniSnmpCommunityRowStatus, juniSnmpCommunityPrivilege, juniSnmpCommunityAccessList, juniSnmpCommunityAccessListName, juniSnmpCommunityView, -- Trap objects juniSnmpTrapGlobalFilter, juniSnmpTrapSource, juniSnmpTrapProxy, juniSnmpTrapHostIpAddress, juniSnmpTrapHostRowStatus, juniSnmpTrapHostUdpPort, juniSnmpTrapHostCommunity, juniSnmpTrapHostProtocolVersion, juniSnmpTrapHostFilter, juniSnmpTrapHostSends } STATUS obsolete DESCRIPTION "Obsolete collection of management objects pertaining to SNMP Agent capability in a Juniper product. This group became obsolete when juniSnmpInterfaceMode was added." ::= { juniSnmpGroups 3 } -- JUNOSe 2.0 juniSnmpGroup3 OBJECT-GROUP OBJECTS { -- General objects juniSnmpMaxPduSize, juniSnmpInterfaceMode, -- Manager objects juniSnmpCommunityName, juniSnmpCommunityRowStatus, juniSnmpCommunityPrivilege, juniSnmpCommunityAccessList, juniSnmpCommunityAccessListName, juniSnmpCommunityView, -- Trap objects juniSnmpTrapGlobalFilter, juniSnmpTrapSource, juniSnmpTrapProxy, juniSnmpTrapHostIpAddress, juniSnmpTrapHostRowStatus, juniSnmpTrapHostUdpPort, juniSnmpTrapHostCommunity, juniSnmpTrapHostProtocolVersion, juniSnmpTrapHostFilter, juniSnmpTrapHostSends } STATUS obsolete DESCRIPTION "Obsolete collection of management objects pertaining to SNMP Agent capability in a Juniper product. This group became obsolete when support for interface compress, trap severities and trap severity filtering was added and juniSnmpInterfaceMode was obsoleted." ::= { juniSnmpGroups 4 } -- JUNOSe 2.3 juniSnmpGeneralGroup OBJECT-GROUP OBJECTS { juniSnmpMaxPduSize, juniSnmpIntfCompCompressed, juniSnmpIntfCompEnhanced, juniSnmpIntfCompEnhancedDisplay, juniSnmpIntfCompRestricted, juniSnmpIntfCompRestrictedDisplay } STATUS obsolete DESCRIPTION "Obsolete collection of management objects pertaining to general SNMP Agent capabilities in a Juniper product. This group became obsolete when proxy enable/disable support was added." ::= { juniSnmpGroups 5 } -- JUNOSe 3.3 juniSnmpAccessGroup OBJECT-GROUP OBJECTS { juniSnmpCommunityName, juniSnmpCommunityRowStatus, juniSnmpCommunityPrivilege, juniSnmpCommunityAccessList, juniSnmpCommunityAccessListName, juniSnmpCommunityView } STATUS current DESCRIPTION "A collection of management objects pertaining to SNMP Agent access capabilities in a Juniper product." ::= { juniSnmpGroups 6 } -- JUNOSe 3.3 juniSnmpTrapGroup OBJECT-GROUP OBJECTS { juniSnmpTrapGlobalFilter, juniSnmpTrapSource, juniSnmpTrapProxy, juniSnmpTrapHostIpAddress, juniSnmpTrapHostRowStatus, juniSnmpTrapHostUdpPort, juniSnmpTrapHostCommunity, juniSnmpTrapHostProtocolVersion, juniSnmpTrapHostFilter, juniSnmpTrapHostSends, juniSnmpTrapHostDiscards, juniSnmpTrapHostSeverityFilter, juniSnmpTrapTrapSeverity, juniSnmpTrapGlobalDiscards, juniSnmpTrapGlobalSeverityFilter } STATUS obsolete DESCRIPTION "Obsolete collection of management objects pertaining to SNMP Agent trap capabilities in a Juniper product. This group became obsolete when support was added for ping time window and notification log data inclusion in trap varbinds." ::= { juniSnmpGroups 7 } -- JUNOSe 3.3 juniSnmpGeneralGroup2 OBJECT-GROUP OBJECTS { juniSnmpMaxPduSize, juniSnmpProxyStatus, juniSnmpIntfCompCompressed, juniSnmpIntfCompEnhanced, juniSnmpIntfCompEnhancedDisplay, juniSnmpIntfCompRestricted, juniSnmpIntfCompRestrictedDisplay } STATUS obsolete DESCRIPTION "A collection of management objects pertaining to general SNMP Agent capabilities in a Juniper product. This group became obsolete when access permission was added." ::= { juniSnmpGroups 8 } -- JUNOSe 3.4 juniSnmpTrapGroup2 OBJECT-GROUP OBJECTS { juniSnmpTrapGlobalFilter, juniSnmpTrapSource, juniSnmpTrapProxy, juniSnmpTrapHostIpAddress, juniSnmpTrapHostRowStatus, juniSnmpTrapHostUdpPort, juniSnmpTrapHostCommunity, juniSnmpTrapHostProtocolVersion, juniSnmpTrapHostFilter, juniSnmpTrapHostSends, juniSnmpTrapHostDiscards, juniSnmpTrapHostSeverityFilter, juniSnmpTrapHostPingTimeOut, juniSnmpTrapHostIncludeLogVarbinds, juniSnmpTrapHostQueueSize, juniSnmpTrapHostQueueDrainRate, juniSnmpTrapHostQueueFull, juniSnmpTrapHostBadEncodingDiscards, juniSnmpTrapHostQueueFullDiscards, juniSnmpTrapHostNoResponseDiscards, juniSnmpTrapTrapSeverity, juniSnmpTrapGlobalDiscards, juniSnmpTrapGlobalSeverityFilter, juniSnmpTrapTotalTrapsReceived, juniSnmpTrapLocalTrapsSubmitted, juniSnmpTrapProxyTrapsSubmitted, juniSnmpTrapTotalTrapsDiscarded, juniSnmpTrapNoMemoryDiscards, juniSnmpTrapNoQueueResourceDiscards, juniSnmpTrapAgentSnmpNotAbleDiscards, juniSnmpTrapTotalTrapsOut, juniSnmpTrapTotalProxyOut } STATUS obsolete DESCRIPTION "Obsolete collection of management objects pertaining to SNMP Agent trap capabilities in a Juniper product. This group became obsolete when support was added for trap severity filter table." ::= { juniSnmpGroups 9 } -- JUNOSe 4.1 juniSnmpGeneralGroup3 OBJECT-GROUP OBJECTS { juniSnmpMaxPduSize, juniSnmpProxyStatus, juniSnmpAccessPermission, juniSnmpIntfCompCompressed, juniSnmpIntfCompEnhanced, juniSnmpIntfCompEnhancedDisplay, juniSnmpIntfCompRestricted, juniSnmpIntfCompRestrictedDisplay, juniSnmpManagementApplicationRowStatus } STATUS obsolete DESCRIPTION "A collection of management objects pertaining to general SNMP Agent capabilities in a Juniper product. This group became obsolete when support for interface compression based on interface table type was added." ::= { juniSnmpGroups 10 } -- JUNOSe 5.1 juniSnmpTrapGroup3 OBJECT-GROUP OBJECTS { juniSnmpTrapGlobalFilter, juniSnmpTrapSource, juniSnmpTrapProxy, juniSnmpTrapHostIpAddress, juniSnmpTrapHostRowStatus, juniSnmpTrapHostUdpPort, juniSnmpTrapHostCommunity, juniSnmpTrapHostProtocolVersion, juniSnmpTrapHostFilter, juniSnmpTrapHostSends, juniSnmpTrapHostDiscards, juniSnmpTrapHostSeverityFilter, juniSnmpTrapHostPingTimeOut, juniSnmpTrapHostIncludeLogVarbinds, juniSnmpTrapHostQueueSize, juniSnmpTrapHostQueueDrainRate, juniSnmpTrapHostQueueFull, juniSnmpTrapHostBadEncodingDiscards, juniSnmpTrapHostQueueFullDiscards, juniSnmpTrapHostNoResponseDiscards, juniSnmpTrapTrapSeverity, juniSnmpTrapGlobalDiscards, juniSnmpTrapGlobalSeverityFilter, juniSnmpTrapTotalTrapsReceived, juniSnmpTrapLocalTrapsSubmitted, juniSnmpTrapProxyTrapsSubmitted, juniSnmpTrapTotalTrapsDiscarded, juniSnmpTrapNoMemoryDiscards, juniSnmpTrapNoQueueResourceDiscards, juniSnmpTrapAgentSnmpNotAbleDiscards, juniSnmpTrapTotalTrapsOut, juniSnmpTrapTotalProxyOut, juniSnmpTrapSeverityFilter } STATUS current DESCRIPTION "A collection of management objects pertaining to SNMP Agent trap capabilities in a Juniper product." ::= { juniSnmpGroups 11 } -- JUNOSe 9.3 juniSnmpGeneralGroup4 OBJECT-GROUP OBJECTS { juniSnmpMaxPduSize, juniSnmpProxyStatus, juniSnmpAccessPermission, juniSnmpIntfCompCompressed, juniSnmpIntfCompEnhanced, juniSnmpIntfCompEnhancedDisplay, juniSnmpIntfCompRestricted, juniSnmpIntfCompRestrictedDisplay, juniSnmpManagementApplicationRowStatus, juniSnmpIntfCompEntryCompressed, juniSnmpIntfCompMask, juniSnmpIntfCompMaskDisplay } STATUS current DESCRIPTION "A collection of management objects pertaining to general SNMP Agent capabilities in a Juniper product." ::= { juniSnmpGroups 12 } -- JUNOSe 10.1 END