LINKSYS-COPY-MIB DEFINITIONS ::= BEGIN IMPORTS rnd, rndNotifications FROM LINKSYS-MIB rndErrorDesc , rndErrorSeverity FROM LINKSYS-DEVICEPARAMS-MIB OBJECT-TYPE, IpAddress, Unsigned32,Counter32, TimeTicks, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC InetAddressType,InetAddress FROM INET-ADDRESS-MIB RlSecSdAccessType FROM LINKSYS-SECSD-MIB; -- RFC2851 rlCopy MODULE-IDENTITY LAST-UPDATED "201005110000Z" ORGANIZATION "Linksys LLC." CONTACT-INFO "www.linksys.com/business/support" DESCRIPTION "Added field rlCopyInetSpecificCopyInfo" REVISION "201007250000Z" DESCRIPTION "Added USB file type." REVISION "201005110000Z" DESCRIPTION "Added objects rlCopyInetDestinationUnitList,rlCopyHistoryInetDestinationUnitList,rlCopyInetUnitStatusList,rlCopyHistoryInetUnitStatusList." REVISION "201002170000Z" DESCRIPTION "Added mirror-config and MIB rlCopyMirrorTimeout." REVISION "200908100000Z" DESCRIPTION "The private MIB module definition for file copy in Linksys devices." REVISION "200602020000Z" DESCRIPTION "Added objects rlCopyMessagesTable and rlCopyMessagesTableRemoveEntries." REVISION "200309220000Z" DESCRIPTION "Initial version of this MIB." ::= { rnd 87 } RlCopyApplicationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies management application" SYNTAX INTEGER { mcli(1), cli(2), ewb(3), nms(4), initerm(5), serial(6) } RlCopyLocationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies file location" SYNTAX INTEGER { local(1), anotherUnit(2), tftp(3), xmodem(4), scp(5), serial(6), http(7), https(8), http-xml(9), https-xml(10) } RlCopyFileType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The File type" SYNTAX INTEGER { other(1), runningConfig(2), startupConfig(3), backupConfig(4), runningMibConfig(5), startupMibConfig(6), backupMibConfig(7), image(8), boot(9), null(10), logging(11), mirrorConfig(12), usb(13) } RlCopySecSdAccessType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Sec sd access type" SYNTAX INTEGER { exclude(1), include-encrypted(2), include-decrypted(3), default(4) } rlCopyMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Copy support version. The current version is 1." ::= {rlCopy 1 } rlCopyTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action." ::= {rlCopy 2 } rlCopyEntry OBJECT-TYPE SYNTAX RlCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the CopyTable." INDEX {rlCopyIndex } ::= {rlCopyTable 1 } RlCopyEntry ::= SEQUENCE { rlCopyIndex INTEGER, rlCopyApplicationId RlCopyApplicationType, rlCopySourceLocation RlCopyLocationType, rlCopySourceIpAddress IpAddress, rlCopySourceUnitNumber INTEGER, rlCopySourceFileName DisplayString, rlCopySourceFileType RlCopyFileType, rlCopyDestinationLocation RlCopyLocationType, rlCopyDestinationIpAddress IpAddress, rlCopyDestinationUnitNumber INTEGER, rlCopyDestinationFileName DisplayString, rlCopyDestinationFileType RlCopyFileType, rlCopyUpTime TimeTicks, rlCopyOperationState INTEGER, rlCopyBytesTransferred INTEGER, rlCopyInBackground INTEGER, rlCopyRowStatus RowStatus, rlCopyHistoryIndex INTEGER } rlCopyIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The row index in the table." ::= { rlCopyEntry 1 } rlCopyApplicationId OBJECT-TYPE SYNTAX RlCopyApplicationType MAX-ACCESS read-only STATUS current DESCRIPTION "The applicatione activated this comand" ::= { rlCopyEntry 2} rlCopySourceLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Source File Location" ::= { rlCopyEntry 3 } rlCopySourceIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Ip address of the source remote host" ::= { rlCopyEntry 4 } rlCopySourceUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the source unit" ::= { rlCopyEntry 5 } rlCopySourceFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the source file." ::= { rlCopyEntry 6 } rlCopySourceFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the source file." ::= { rlCopyEntry 7 } rlCopyDestinationLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Destination File Location" ::= { rlCopyEntry 8 } rlCopyDestinationIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Ip address of the destination remote host" ::= { rlCopyEntry 9 } rlCopyDestinationUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the destination unit, value 257 means all units" ::= { rlCopyEntry 10 } rlCopyDestinationFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the destination file." ::= { rlCopyEntry 11 } rlCopyDestinationFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the destination file." ::= { rlCopyEntry 12 } rlCopyUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since this entry was created." ::= { rlCopyEntry 13 } rlCopyOperationState OBJECT-TYPE SYNTAX INTEGER { uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the copy operation." ::= { rlCopyEntry 14 } rlCopyBytesTransferred OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes that were transferred by the copy operation." ::= { rlCopyEntry 15 } rlCopyInBackground OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled the copy operation is done in the background." DEFVAL { disable } ::= { rlCopyEntry 16 } rlCopyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to insert or delete an entry" ::= { rlCopyEntry 17 } -- Robi 9/5/2003 rlCopyHistoryIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation." DEFVAL { 0 } ::= { rlCopyEntry 18 } rlCopyFreeHistoryIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Gives the next free index in the rlCopyHistoryTable (i.e., the next available value for rlCopyHistoryHistoryIndex)" ::= { rlCopy 3 } rlCopyHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCopyHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action." ::= {rlCopy 4 } rlCopyHistoryEntry OBJECT-TYPE SYNTAX RlCopyHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the rlCopyHistoryTable." INDEX {rlCopyHistoryHistoryIndex } ::= {rlCopyHistoryTable 1 } RlCopyHistoryEntry ::= SEQUENCE { rlCopyHistoryHistoryIndex INTEGER, rlCopyHistoryApplicationId RlCopyApplicationType, rlCopyHistorySourceLocation RlCopyLocationType, rlCopyHistorySourceIpAddress IpAddress, rlCopyHistorySourceUnitNumber INTEGER, rlCopyHistorySourceFileName DisplayString, rlCopyHistorySourceFileType RlCopyFileType, rlCopyHistoryDestinationLocation RlCopyLocationType, rlCopyHistoryDestinationIpAddress IpAddress, rlCopyHistoryDestinationUnitNumber INTEGER, rlCopyHistoryDestinationFileName DisplayString, rlCopyHistoryDestinationFileType RlCopyFileType, rlCopyHistoryUpTime TimeTicks, rlCopyHistoryOperationState INTEGER, rlCopyHistoryBytesTransferred INTEGER, rlCopyHistoryInBackground INTEGER, rlCopyHistoryRowStatus RowStatus, rlCopyHistoryErrorMessage DisplayString } rlCopyHistoryHistoryIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The row index in the table." ::= { rlCopyHistoryEntry 1 } rlCopyHistoryApplicationId OBJECT-TYPE SYNTAX RlCopyApplicationType MAX-ACCESS read-only STATUS current DESCRIPTION "The application that activated this comand" ::= { rlCopyHistoryEntry 2} rlCopyHistorySourceLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Source File Location" ::= { rlCopyHistoryEntry 3 } rlCopyHistorySourceIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the source remote host" ::= { rlCopyHistoryEntry 4 } rlCopyHistorySourceUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the source unit" ::= { rlCopyHistoryEntry 5 } rlCopyHistorySourceFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the source file." ::= { rlCopyHistoryEntry 6 } rlCopyHistorySourceFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the source file." ::= { rlCopyHistoryEntry 7 } rlCopyHistoryDestinationLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Destination File Location" ::= { rlCopyHistoryEntry 8 } rlCopyHistoryDestinationIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the destination remote host" ::= { rlCopyHistoryEntry 9 } rlCopyHistoryDestinationUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the destination unit" ::= { rlCopyHistoryEntry 10 } rlCopyHistoryDestinationFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the destination file." ::= { rlCopyHistoryEntry 11 } rlCopyHistoryDestinationFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the destination file." ::= { rlCopyHistoryEntry 12 } rlCopyHistoryUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since this entry was created." ::= { rlCopyHistoryEntry 13 } rlCopyHistoryOperationState OBJECT-TYPE SYNTAX INTEGER { uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the copy operation." ::= { rlCopyHistoryEntry 14 } rlCopyHistoryBytesTransferred OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes that were transferred by the copy operation." ::= { rlCopyHistoryEntry 15 } rlCopyHistoryInBackground OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled the copy operation is done in the background." DEFVAL { disable } ::= { rlCopyHistoryEntry 16 } rlCopyHistoryRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only." ::= { rlCopyHistoryEntry 17 } rlCopyHistoryErrorMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Error message as a result of failed copy action." ::= { rlCopyHistoryEntry 18 } --- File Copy auditing control (SysLog) rlCopyAuditingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether SysLog messages should be issued on file copy events" DEFVAL { true } ::= { rlCopy 5 } rlCopyMessagesTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCopyMessagesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table listing the messages issued during a COPY operation." ::= {rlCopy 6 } rlCopyMessagesEntry OBJECT-TYPE SYNTAX RlCopyMessagesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the rlCopyMessagesTable." INDEX {rlCopyMessagesCopyIndex, rlCopyMessagesMessageIndex } ::= {rlCopyMessagesTable 1 } RlCopyMessagesEntry ::= SEQUENCE { rlCopyMessagesCopyIndex INTEGER, rlCopyMessagesMessageIndex INTEGER, rlCopyMessagesMessageText DisplayString, rlCopyMessagesStatus RowStatus } rlCopyMessagesCopyIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the copy operation whose messages are displayed." ::= { rlCopyMessagesEntry 1 } rlCopyMessagesMessageIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the displayed message." ::= { rlCopyMessagesEntry 2 } rlCopyMessagesMessageText OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The text of the message occurred in the copy operation." ::= { rlCopyMessagesEntry 3 } rlCopyMessagesStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Only destroy is supported." ::= { rlCopyMessagesEntry 4 } rlCopyMessagesTableRemoveEntries OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object with value n will remove all entries associated with copy operation represented by the value n from the rlCopyMessagesTable, i.e. all the entries with rlCopyMessagesCopyIndex = n." ::= { rlCopy 7 } -- -- Copy Notifications -- rlCopyFinished NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity } STATUS current DESCRIPTION "Informational trap indicating that the device has finished a copy operation successfully." ::= { rndNotifications 180 } rlCopyFailed NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity } STATUS current DESCRIPTION "Informational trap indicating that the copy operation has failed." ::= { rndNotifications 181 } rlCopySWFinished NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity } STATUS current DESCRIPTION "A trap indicating that the device has finished a copy operation of image successfully." ::= { rndNotifications 211 } rlCopySWToUnits NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity, rlCopyUnitsList } STATUS current DESCRIPTION "A trap indicating to master unit that remote units have finished a copy operation of image successfully." ::= { rndNotifications 212 } rlCopyMirrorFileIllegal NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity } STATUS current DESCRIPTION "A trap indicating that the mirror configuration file is illegal due to failure of prevoius copy operation/s to mirror-config." ::= { rndNotifications 220 } -- AlexeyK 30/11/06 IPv6 support rlCopyInetTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCopyInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action." ::= {rlCopy 8 } rlCopyInetEntry OBJECT-TYPE SYNTAX RlCopyInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the CopyTable." INDEX {rlCopyInetIndex } ::= {rlCopyInetTable 1 } RlCopyInetEntry ::= SEQUENCE { rlCopyInetIndex INTEGER, rlCopyInetApplicationId RlCopyApplicationType, rlCopyInetSourceLocation RlCopyLocationType, rlCopyInetSourceIpAddressType InetAddressType, rlCopyInetSourceIpAddress InetAddress, rlCopyInetSourceUnitNumber INTEGER, rlCopyInetSourceFileName DisplayString, rlCopyInetSourceFileType RlCopyFileType, rlCopyInetDestinationLocation RlCopyLocationType, rlCopyInetDestinationIpAddressType InetAddressType, rlCopyInetDestinationIpAddress InetAddress, rlCopyInetDestinationUnitNumber INTEGER, rlCopyInetDestinationFileName DisplayString, rlCopyInetDestinationFileType RlCopyFileType, rlCopyInetUpTime TimeTicks, rlCopyInetOperationState INTEGER, rlCopyInetBytesTransferred INTEGER, rlCopyInetInBackground INTEGER, rlCopyInetRowStatus RowStatus, rlCopyInetHistoryIndex INTEGER, rlCopyInetDestinationUnitList INTEGER, rlCopyInetUnitStatusList INTEGER, rlCopyInetSpecificCopyInfo DisplayString } rlCopyInetIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The row index in the table." ::= { rlCopyInetEntry 1 } rlCopyInetApplicationId OBJECT-TYPE SYNTAX RlCopyApplicationType MAX-ACCESS read-only STATUS current DESCRIPTION "The applicatione activated this comand" ::= { rlCopyInetEntry 2} rlCopyInetSourceLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Source File Location" ::= { rlCopyInetEntry 3 } rlCopyInetSourceIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address type of the source remote host" ::= { rlCopyInetEntry 4 } rlCopyInetSourceIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address of the source remote host" ::= { rlCopyInetEntry 5 } rlCopyInetSourceUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the source unit" ::= { rlCopyInetEntry 6 } rlCopyInetSourceFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the source file." ::= { rlCopyInetEntry 7 } rlCopyInetSourceFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the source file." ::= { rlCopyInetEntry 8 } rlCopyInetDestinationLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Destination File Location" ::= { rlCopyInetEntry 9 } rlCopyInetDestinationIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address type of the destination remote host" ::= { rlCopyInetEntry 10 } rlCopyInetDestinationIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address of the destination remote host" ::= { rlCopyInetEntry 11 } rlCopyInetDestinationUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the destination unit, value 257 means all units" ::= { rlCopyInetEntry 12 } rlCopyInetDestinationFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the destination file." ::= { rlCopyInetEntry 13 } rlCopyInetDestinationFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the destination file." ::= { rlCopyInetEntry 14 } rlCopyInetUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since this entry was created." ::= { rlCopyInetEntry 15 } rlCopyInetOperationState OBJECT-TYPE SYNTAX INTEGER { uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the copy operation." ::= { rlCopyInetEntry 16 } rlCopyInetBytesTransferred OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes that were transferred by the copy operation." ::= { rlCopyInetEntry 17 } rlCopyInetInBackground OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled the copy operation is done in the background." DEFVAL { disable } ::= { rlCopyInetEntry 18 } rlCopyInetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to insert or delete an entry" ::= { rlCopyInetEntry 19 } rlCopyInetHistoryIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation." DEFVAL { 0 } ::= { rlCopyInetEntry 20 } -- Liran 17-Feb-2010 rlCopyInetDestinationUnitList OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "A bitmap of destination units for copy operation." DEFVAL { 0 } ::= { rlCopyInetEntry 21 } rlCopyInetUnitStatusList OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A bitmap of copy operation status for each unit." ::= { rlCopyInetEntry 22 } rlCopyInetSpecificCopyInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Copy application specific information. For example: for SCP copy this field can be used to pass username and password information." DEFVAL { "" } ::= { rlCopyInetEntry 23 } -- AlexeyK 30/11/06 IPv6 rlCopyHistoryInetTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCopyHistoryInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action." ::= {rlCopy 9 } rlCopyHistoryInetEntry OBJECT-TYPE SYNTAX RlCopyHistoryInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the rlCopyHistoryTable." INDEX {rlCopyHistoryInetHistoryIndex } ::= {rlCopyHistoryInetTable 1 } RlCopyHistoryInetEntry ::= SEQUENCE { rlCopyHistoryInetHistoryIndex INTEGER, rlCopyHistoryInetApplicationId RlCopyApplicationType, rlCopyHistoryInetSourceLocation RlCopyLocationType, rlCopyHistoryInetSourceIpAddressType InetAddressType, rlCopyHistoryInetSourceIpAddress InetAddress, rlCopyHistoryInetSourceUnitNumber INTEGER, rlCopyHistoryInetSourceFileName DisplayString, rlCopyHistoryInetSourceFileType RlCopyFileType, rlCopyHistoryInetDestinationLocation RlCopyLocationType, rlCopyHistoryInetDestinationIpAddressType InetAddressType, rlCopyHistoryInetDestinationIpAddress InetAddress, rlCopyHistoryInetDestinationUnitNumber INTEGER, rlCopyHistoryInetDestinationFileName DisplayString, rlCopyHistoryInetDestinationFileType RlCopyFileType, rlCopyHistoryInetUpTime TimeTicks, rlCopyHistoryInetOperationState INTEGER, rlCopyHistoryInetBytesTransferred INTEGER, rlCopyHistoryInetInBackground INTEGER, rlCopyHistoryInetRowStatus RowStatus, rlCopyHistoryInetErrorMessage DisplayString, rlCopyHistoryInetDestinationUnitList INTEGER, rlCopyHistoryInetUnitStatusList INTEGER } rlCopyHistoryInetHistoryIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The row index in the table." ::= { rlCopyHistoryInetEntry 1 } rlCopyHistoryInetApplicationId OBJECT-TYPE SYNTAX RlCopyApplicationType MAX-ACCESS read-only STATUS current DESCRIPTION "The application that activated this comand" ::= { rlCopyHistoryInetEntry 2} rlCopyHistoryInetSourceLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Source File Location" ::= { rlCopyHistoryInetEntry 3 } rlCopyHistoryInetSourceIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address type of the source remote host" ::= { rlCopyHistoryInetEntry 4 } rlCopyHistoryInetSourceIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address of the source remote host" ::= { rlCopyHistoryInetEntry 5 } rlCopyHistoryInetSourceUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the source unit" ::= { rlCopyHistoryInetEntry 6 } rlCopyHistoryInetSourceFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the source file." ::= { rlCopyHistoryInetEntry 7 } rlCopyHistoryInetSourceFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the source file." ::= { rlCopyHistoryInetEntry 8 } rlCopyHistoryInetDestinationLocation OBJECT-TYPE SYNTAX RlCopyLocationType MAX-ACCESS read-write STATUS current DESCRIPTION "Destination File Location" ::= { rlCopyHistoryInetEntry 9 } rlCopyHistoryInetDestinationIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address type of the destination remote host" ::= { rlCopyHistoryInetEntry 10 } rlCopyHistoryInetDestinationIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet address of the destination remote host" ::= { rlCopyHistoryInetEntry 11 } rlCopyHistoryInetDestinationUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number of the destination unit" ::= { rlCopyHistoryInetEntry 12 } rlCopyHistoryInetDestinationFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the destination file." ::= { rlCopyHistoryInetEntry 13 } rlCopyHistoryInetDestinationFileType OBJECT-TYPE SYNTAX RlCopyFileType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the destination file." ::= { rlCopyHistoryInetEntry 14 } rlCopyHistoryInetUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since this entry was created." ::= { rlCopyHistoryInetEntry 15 } rlCopyHistoryInetOperationState OBJECT-TYPE SYNTAX INTEGER { uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the copy operation." ::= { rlCopyHistoryInetEntry 16 } rlCopyHistoryInetBytesTransferred OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes that were transferred by the copy operation." ::= { rlCopyHistoryInetEntry 17 } rlCopyHistoryInetInBackground OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled the copy operation is done in the background." DEFVAL { disable } ::= { rlCopyHistoryInetEntry 18 } rlCopyHistoryInetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only." ::= { rlCopyHistoryInetEntry 19 } rlCopyHistoryInetErrorMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Error message as a result of failed copy action." ::= { rlCopyHistoryInetEntry 20 } -- Liran 17-Feb-2010 rlCopyHistoryInetDestinationUnitList OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "A bitmap of destination units for copy operation." DEFVAL { 0 } ::= { rlCopyHistoryInetEntry 21 } rlCopyHistoryInetUnitStatusList OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A bitmap of copy operation status for each unit." ::= { rlCopyHistoryInetEntry 22 } rlCopyUnitsList OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Potential list of units used by trap rlCopySWToUnits" ::= {rlCopy 10} rlCopyMirrorTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " This MIB should be used in order to change the time-interval of automatic copy of startup-config to mirror-config. The MIB is for debugging purposes only, and given value should be the number of minutes for time-interval of this copy." ::= { rlCopy 11 } rlCopyOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCopyOptionsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes more field options for the copy operation." ::= {rlCopy 12 } rlCopyOptionsEntry OBJECT-TYPE SYNTAX RlCopyOptionsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the rlCopyOptionsTable." INDEX {rlCopyOptionsIndex } ::= { rlCopyOptionsTable 1 } RlCopyOptionsEntry ::= SEQUENCE { rlCopyOptionsIndex Unsigned32, rlCopyOptionsRequestedSsdAccess RlCopySecSdAccessType } rlCopyOptionsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index should be equal to the value of rlCopyInetIndex of the relevant rlCopyInetEntry." ::= { rlCopyOptionsEntry 1 } rlCopyOptionsRequestedSsdAccess OBJECT-TYPE SYNTAX RlCopySecSdAccessType MAX-ACCESS read-create STATUS current DESCRIPTION "The requested format for sensitive data in the copy. Relevant only for configuration file upload" DEFVAL { default } ::= { rlCopyOptionsEntry 2 } rlCopyMirror OBJECT IDENTIFIER ::= { rlCopy 13 } rlCopyMirrorEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This MIB should be used in order to enable/disable automatic copy of startup-config to mirror-config." ::= { rlCopyMirror 1 } --- File Copy downgrade status rlCopyStaticDowngradeStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Controls whether static downgrade in progress " DEFVAL { false } ::= { rlCopy 14 } END