LINKSYS-IpRouter DEFINITIONS ::= BEGIN -- Title: LINKSYS IP Router Private Extension -- Version: 7.50.00.00 -- Date: 30 Nov 2010 IMPORTS rip2Spec, ipRedundancy, ipRouteLeaking, ipRipFilter, rlIpRoutingProtPreference, rlOspf, ipSpec FROM LINKSYS-IP rip2IfConfEntry FROM RIPv2-MIB ospfIfEntry, AreaID, RouterID, ospfVirtIfEntry FROM OSPF-MIB Unsigned32, Integer32, Counter32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; rlIpRouter MODULE-IDENTITY LAST-UPDATED "200406010000Z" ORGANIZATION "Linksys LLC." CONTACT-INFO "www.linksys.com/business/support" DESCRIPTION "The private MIB module definition for RND router MIB." REVISION "200406010000Z" DESCRIPTION "Initial version of this MIB." ::= { ipSpec 18 } -- -- RIP -- rsRip2IfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF RsRip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is extension of rip2IfConfTable (RFC 1724 ,RIP 2)" ::= { rip2Spec 1 } rsRip2IfConfEntry OBJECT-TYPE SYNTAX RsRip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { rsRip2IfConfAddress } ::= { rsRip2IfConfTable 1 } RsRip2IfConfEntry ::= SEQUENCE { rsRip2IfConfAddress IpAddress, rsRip2IfConfVirtualDis INTEGER, rlRip2IfConfKeyChain DisplayString, rlRip2IfConfAdminStatus INTEGER, rlRip2IfConfInFilteringType INTEGER, rlRip2IfConfOutFilteringType INTEGER, rlRip2IfConfInFilterListName DisplayString, rlRip2IfConfOutFilterListName DisplayString, rlRip2IfConfDefInfOriginate INTEGER } rsRip2IfConfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The IP Address of this system on the indicated subnet. " ::= { rsRip2IfConfEntry 1 } rsRip2IfConfVirtualDis OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm." DEFVAL { 1 } ::= { rsRip2IfConfEntry 2 } rlRip2IfConfKeyChain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the key-chain which rip2 interface uses for md5 authentication" ::= { rsRip2IfConfEntry 3 } rlRip2IfConfAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable defines administrative status of RIP interface. " DEFVAL {enable} ::= { rsRip2IfConfEntry 4 } rlRip2IfConfInFilteringType OBJECT-TYPE SYNTAX INTEGER { none (1), stdIpAcl (2), pefixList (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Rx filtering (ACL, Prefix List etc)." DEFVAL {none} ::= { rsRip2IfConfEntry 5 } rlRip2IfConfOutFilteringType OBJECT-TYPE SYNTAX INTEGER { none (1), stdIpAcl (2), pefixList (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Tx filtering (ACL, Prefix List etc)." DEFVAL {none} ::= { rsRip2IfConfEntry 6 } rlRip2IfConfInFilterListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of a filtering list. The list defines which networks are to be received and which are to be suppressed in routing updates. List type is defined by rlRip2IfConfFilteringType." ::= { rsRip2IfConfEntry 7 } rlRip2IfConfOutFilterListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of a filtering list. The list defines which networks are to be sent and which are to be suppressed. List type is defined by rlRip2IfConfFilteringType." ::= { rsRip2IfConfEntry 8 } rlRip2IfConfDefInfOriginate OBJECT-TYPE SYNTAX INTEGER { global (1), disabled (2), enabled (3), passiveOnly (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "if set to global RIP behavior is specified by the value of rlRip2GlobalDefaultInformationOriginate scalar if set to enabled RIP will advertise default route on this interfaces if set to passiveOnly RIP will advertise default route on this interfaces only if it is configured to passive mode" DEFVAL { global } ::= { rsRip2IfConfEntry 9 } rlRip2MibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 2." ::= { rip2Spec 2 } rlRip2RedistDefaultMetric OBJECT-TYPE SYNTAX Unsigned32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default metric value when RIP advertises routes, derived by other protocols." DEFVAL { 1 } ::= { rip2Spec 3 } rlRip2RedistStaticTransparent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to TRUE causes RIP to use the routing table metric for redistributed static routes as the RIP metric. If set to FALSE then the metric defined in rlRip2RedistDefaultMetric is used." DEFVAL { false } ::= { rip2Spec 4 } rlRip2ClearStatistics OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clears RIP statistics counters of all interfaces and all peers." DEFVAL { false } ::= { rip2Spec 5 } rlRip2IfConfGlobalPassiveInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "if set to TRUE all interfaces created will be created as passive (rip2IfConfSend = doNotSend)" DEFVAL { false } ::= { rip2Spec 6 } rlRip2GlobalDefInfOriginate OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), passiveOnly (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "if set to Enabled RIP will advertise default route on all RIP interfaces if set to PassiveOnly RIP will advertise default route on all RIP passive interfaces" DEFVAL { disabled } ::= { rip2Spec 7 } rlRip2RedistConnected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to TRUE causes RIP to redistribute directly connected interfaces, on which RIP is not enabled." DEFVAL { false } ::= { rip2Spec 8 } rlRip2RedistConnectedTransparent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to TRUE causes RIP to use the routing table metric for redistributed connected routes as the RIP metric. If set to FALSE then the metric defined in rlRip2RedistDefaultMetric is used." DEFVAL { false } ::= { rip2Spec 9 } rlRip2RedistConnectedMetric OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "User defined metric value when RIP advertises directly connected interfaces, on which RIP is not enabled." DEFVAL { 0 } ::= { rip2Spec 10 } -- -- LINKSYS Private IP Router Redundancy -- ipRedundAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls the IP Redundancy in the device. In case the parameter is Enable and the other router becomes inoperational, all the traffic is handled by this element." DEFVAL {disable } ::= { ipRedundancy 1 } ipRedundOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " obsolete " DEFVAL {inactive} ::= { ipRedundancy 2 } ipRedundRoutersTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRedundRoutersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of IP addresses backed up by this router." ::= {ipRedundancy 3 } ipRedundRoutersEntry OBJECT-TYPE SYNTAX IpRedundRoutersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The row definition for this table." INDEX {ipRedundRoutersIfAddr, ipRedundRoutersMainRouterAddr} ::= {ipRedundRoutersTable 1 } IpRedundRoutersEntry ::= SEQUENCE { ipRedundRoutersIfAddr IpAddress, ipRedundRoutersMainRouterAddr IpAddress, ipRedundRoutersOperStatus INTEGER, ipRedundRoutersPollInterval INTEGER, ipRedundRoutersTimeout INTEGER, ipRedundRoutersStatus INTEGER } ipRedundRoutersIfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Ip address of the IP interface on which the redundancy feature is operational." ::= { ipRedundRoutersEntry 1} ipRedundRoutersMainRouterAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Ip address of the polled main router." ::= { ipRedundRoutersEntry 2} ipRedundRoutersOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "If active, the main router is considered inoperational and the IP interface operates as its backup." ::= { ipRedundRoutersEntry 3 } ipRedundRoutersPollInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Polling interval for this router (in seconds). If 0 the router is not polled." DEFVAL { 3 } ::= { ipRedundRoutersEntry 4 } ipRedundRoutersTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup." DEFVAL { 12 } ::= { ipRedundRoutersEntry 5} ipRedundRoutersStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Entry status" ::= { ipRedundRoutersEntry 6} -- -- IP Routing Protol leaking -- ipLeakStaticToRip OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP." DEFVAL {enable} ::= { ipRouteLeaking 1 } ipLeakStaticToOspf OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes." DEFVAL {enable} ::= { ipRouteLeaking 2 } ipLeakOspfToRip OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP." DEFVAL {disable} ::= { ipRouteLeaking 3 } ipLeakRipToOspf OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes." DEFVAL {disable} ::= { ipRouteLeaking 4 } ipLeakExtDirectToOspf OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes." DEFVAL {enable} ::= { ipRouteLeaking 5 } -- -- RIP Filters -- -- Global RIP filter is defined per IP router. rsIpRipFilterGlbTable OBJECT-TYPE SYNTAX SEQUENCE OF RsIpRipFilterGlbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of RIP global filters per IP router." ::= { ipRipFilter 1 } rsIpRipFilterGlbEntry OBJECT-TYPE SYNTAX RsIpRipFilterGlbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the RIP global filter table " INDEX { rsIpRipFilterGlbType, rsIpRipFilterGlbNumber } ::= { rsIpRipFilterGlbTable 1 } RsIpRipFilterGlbEntry ::= SEQUENCE { rsIpRipFilterGlbType INTEGER, rsIpRipFilterGlbNumber INTEGER, rsIpRipFilterGlbStatus INTEGER, rsIpRipFilterGlbIpAddr IpAddress, rsIpRipFilterGlbNetworkMaskBits INTEGER, rsIpRipFilterGlbMatchBits INTEGER, rsIpRipFilterGlbAction INTEGER } rsIpRipFilterGlbType OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Type of filter - input/output " ::= {rsIpRipFilterGlbEntry 1} rsIpRipFilterGlbNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Number of RIP filter. " ::= {rsIpRipFilterGlbEntry 2} rsIpRipFilterGlbStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2), underCreation (3) } MAX-ACCESS read-write STATUS current DESCRIPTION " The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table." DEFVAL { valid } ::= {rsIpRipFilterGlbEntry 3} rsIpRipFilterGlbIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " network prefix IP address, as in the forwarding table. " DEFVAL {'00000000'H} ::= {rsIpRipFilterGlbEntry 4} rsIpRipFilterGlbNetworkMaskBits OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 " DEFVAL {0} ::= {rsIpRipFilterGlbEntry 5} rsIpRipFilterGlbMatchBits OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored. " DEFVAL {32} ::= {rsIpRipFilterGlbEntry 6} rsIpRipFilterGlbAction OBJECT-TYPE SYNTAX INTEGER { deny(1), permit(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Filter action - permit/deny for this network" DEFVAL { permit } ::= {rsIpRipFilterGlbEntry 7} -- Intf RIP filter is defined per IP Interface rsIpRipFilterLclTable OBJECT-TYPE SYNTAX SEQUENCE OF RsIpRipFilterLclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of input/output RIP filters used per IP Interface." ::= { ipRipFilter 2 } rsIpRipFilterLclEntry OBJECT-TYPE SYNTAX RsIpRipFilterLclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Intf RIP filter table" INDEX {rsIpRipFilterLclIpIntf, rsIpRipFilterLclType, rsIpRipFilterLclNumber} ::= { rsIpRipFilterLclTable 1 } RsIpRipFilterLclEntry ::= SEQUENCE { rsIpRipFilterLclIpIntf IpAddress, rsIpRipFilterLclType INTEGER, rsIpRipFilterLclNumber INTEGER, rsIpRipFilterLclStatus INTEGER, rsIpRipFilterLclIpAddr IpAddress, rsIpRipFilterLclNetworkMaskBits INTEGER, rsIpRipFilterLclMatchBits INTEGER, rsIpRipFilterLclAction INTEGER } rsIpRipFilterLclIpIntf OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr. " ::= {rsIpRipFilterLclEntry 1} rsIpRipFilterLclType OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Type of filter - input/output " ::= {rsIpRipFilterLclEntry 2} rsIpRipFilterLclNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Number of RIP filter for this Interface" ::= {rsIpRipFilterLclEntry 3} rsIpRipFilterLclStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2), underCreation (3) } MAX-ACCESS read-write STATUS current DESCRIPTION " The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table." DEFVAL { valid } ::= {rsIpRipFilterLclEntry 4} rsIpRipFilterLclIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " network prefix IP address, as in the forwarding table. " DEFVAL {'00000000'H} ::= {rsIpRipFilterLclEntry 5} rsIpRipFilterLclNetworkMaskBits OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 " DEFVAL {0} ::= {rsIpRipFilterLclEntry 6} rsIpRipFilterLclMatchBits OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored. " DEFVAL {32} ::= {rsIpRipFilterLclEntry 7} rsIpRipFilterLclAction OBJECT-TYPE SYNTAX INTEGER { deny(1), permit(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Filter action - permit/deny " DEFVAL { permit } ::= {rsIpRipFilterLclEntry 8} -- -- Ip Routing Protocol Preference -- -- Mib for Preferance among routing protocols: -- Range value 0..255 . O is most preferred, 255 never used for forwarding. -- only exception is direct which range 0..254 we prevent direct from becoming unreachable -- (according to RFC1812 section 5.2.4) rlIpRoutingProtPreferenceDirect OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is Local IP (i.e. IP interface in IpAddrTable) It is proposed that the value will be higher than dynamic routing protocols. The change of its value may lead to unexpected results, such as routing loops" DEFVAL { 20 } ::= {rlIpRoutingProtPreference 1} rlIpRoutingProtPreferenceStatic OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is Men configured by Net managment tools, i.e. Command line or SNMP configured." DEFVAL { 10 } ::= {rlIpRoutingProtPreference 2} -- For OSPF: rlIpRoutingProtPreferenceOspfInter OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is internal ospf Links. Relate to routes which are based on OSPF Link State Advertisements of type 1-4" DEFVAL { 30 } ::= {rlIpRoutingProtPreference 3} rlIpRoutingProtPreferenceOspfExt OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is external to OSPF i.e. routes imported by as OSPF AS Border router. Relate to routes which are based on OSPF Link State Advertisements of types 5 and 7" DEFVAL { 60 } ::= {rlIpRoutingProtPreference 4} rlIpRoutingProtPreferenceOspfReject OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is OSPF and Are inserted to cover gaps in net range" DEFVAL { 254 } ::= {rlIpRoutingProtPreference 5} --For Rip rlIpRoutingProtPreferenceRipNormal OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is RIP routing domain" DEFVAL { 60 } ::= {rlIpRoutingProtPreference 6} rlIpRoutingProtPreferenceRipAggregate OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is aggregation As a method of rip1 to handle the CIDR schema. The idea is that ripv1 aggregates route which fall into certion class of IP. This route is a discard route in effect, and is referenced, at forwarding route look up, if there is no beter match. (which means the route is not available)" DEFVAL { 254 } ::= {rlIpRoutingProtPreference 7} rlIpRoutingProtPreferenceBgp OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Preference given to routes whose origin is BGP ROUTERS (EBGP or IBGP)" DEFVAL { 80 } ::= {rlIpRoutingProtPreference 8} -- We may use it in the future to control -- the time scalars new values take effect -- rlRoutePrefChangeTakeEffectAT OBJECT-TYPE -- SYNTAX INTEGER { -- afterReset (1), -- immediate (2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The time the changes to preference of protocols will become in effect. -- options are: -- 1. At run time. -- 2. after rebboting the devise -- default value 2 to avoid masive routing change at run time -- " -- DEFVAL { afterReset } -- ::= {rlIpRoutingProtPreference 9} -- -- OSPF -- rlOspfMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 1." ::= { rlOspf 1 } rlOspfAutoInterfaceCreation OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable controls OSPF automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of OSPF Interface. If value is disable OSPF interface is created but not activated. The option is a platform parameter." ::= { rlOspf 2 } --Extention to ospfIfTable rlOspfIfExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOspfIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Table describes the interfaces from the viewpoint of OSPF." ::= { rlOspf 3 } rlOspfIfExtEntry OBJECT-TYPE SYNTAX RlOspfIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF interface table extension for md5 authentication" AUGMENTS { ospfIfEntry } ::= { rlOspfIfExtTable 1 } RlOspfIfExtEntry ::= SEQUENCE { rlOspfifKeyChain DisplayString } rlOspfifKeyChain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the key-chain which ospf interface uses for md5 authentication" ::= { rlOspfIfExtEntry 1 } -- OSPF Link State Advertisements -- OSPF Router LSA rlOspfRtrLnkTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOspfRtrLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Router Link State Advertisement." ::= { rlOspf 4 } rlOspfRtrLnkEntry OBJECT-TYPE SYNTAX RlOspfRtrLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry from Router LSA." INDEX { rlOspfRtrLnkAreaId, rlOspfRtrLnkLsid, rlOspfRtrLnkRouterId, rlOspfRtrLnkIdx } ::= { rlOspfRtrLnkTable 1 } RlOspfRtrLnkEntry ::= SEQUENCE { rlOspfRtrLnkAreaId AreaID, rlOspfRtrLnkLsid IpAddress, rlOspfRtrLnkRouterId RouterID, rlOspfRtrLnkIdx Unsigned32, rlOspfRtrLnkSequence Integer32, rlOspfRtrLnkAge Integer32, rlOspfRtrLnkChecksum Integer32, rlOspfRtrLnkLength Unsigned32, rlOspfRtrLnkBitV INTEGER, rlOspfRtrLnkBitE INTEGER, rlOspfRtrLnkBitB INTEGER, rlOspfRtrLnkLinks Unsigned32, rlOspfRtrLnkLinkID IpAddress, rlOspfRtrLnkLinkData IpAddress, rlOspfRtrLnkType INTEGER, rlOspfRtrLnkMetric Unsigned32 } rlOspfRtrLnkAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { rlOspfRtrLnkEntry 1 } rlOspfRtrLnkLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { rlOspfRtrLnkEntry 2 } rlOspfRtrLnkRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { rlOspfRtrLnkEntry 3 } rlOspfRtrLnkIdx OBJECT-TYPE SYNTAX Unsigned32 (1.. 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries." ::= { rlOspfRtrLnkEntry 4 } rlOspfRtrLnkSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { rlOspfRtrLnkEntry 5 } rlOspfRtrLnkAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state advertisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { rlOspfRtrLnkEntry 6 } rlOspfRtrLnkChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { rlOspfRtrLnkEntry 7 } rlOspfRtrLnkLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lenth in bytes of the LSA. This includes the 20 byte LSA header." ::= { rlOspfRtrLnkEntry 8 } rlOspfRtrLnkBitV OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint)." ::= { rlOspfRtrLnkEntry 9 } rlOspfRtrLnkBitE OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When set, the router is an AS boundary router (E is for external)." ::= { rlOspfRtrLnkEntry 10 } rlOspfRtrLnkBitB OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When set, the router is an area border router (B is for border)." ::= { rlOspfRtrLnkEntry 11 } rlOspfRtrLnkLinks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of router links described in this LSA. This must be the total collection of router links (i.e., interfaces) to the area." ::= { rlOspfRtrLnkEntry 12 } rlOspfRtrLnkLinkID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the object that this router link connects to. Value depends on the link's Type." ::= { rlOspfRtrLnkEntry 13 } rlOspfRtrLnkLinkData OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Value depends on the link's Type field." ::= { rlOspfRtrLnkEntry 14 } rlOspfRtrLnkType OBJECT-TYPE SYNTAX INTEGER { pointToPoint(1), transitNetwork(2), stubNetwork(3), virtualLink(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A quick description of the router link." ::= { rlOspfRtrLnkEntry 15 } rlOspfRtrLnkMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of using this router link." ::= { rlOspfRtrLnkEntry 16 } -- OSPF Network LSA rlOspfNetLnkTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOspfNetLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network Link State Advertisement." ::= { rlOspf 5 } rlOspfNetLnkEntry OBJECT-TYPE SYNTAX RlOspfNetLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry from Network LSA." INDEX { rlOspfNetLnkAreaId, rlOspfNetLnkLsid, rlOspfNetLnkRouterId, rlOspfNetLnkIdx } ::= { rlOspfNetLnkTable 1 } RlOspfNetLnkEntry ::= SEQUENCE { rlOspfNetLnkAreaId AreaID, rlOspfNetLnkLsid IpAddress, rlOspfNetLnkRouterId RouterID, rlOspfNetLnkIdx Unsigned32, rlOspfNetLnkSequence Integer32, rlOspfNetLnkAge Integer32, rlOspfNetLnkChecksum Integer32, rlOspfNetLnkLength Unsigned32, rlOspfNetLnkMask IpAddress, rlOspfNetLnkAttRouter IpAddress } rlOspfNetLnkAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { rlOspfNetLnkEntry 1 } rlOspfNetLnkLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { rlOspfNetLnkEntry 2 } rlOspfNetLnkRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { rlOspfNetLnkEntry 3 } rlOspfNetLnkIdx OBJECT-TYPE SYNTAX Unsigned32 (1.. 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries." ::= { rlOspfNetLnkEntry 4 } rlOspfNetLnkSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { rlOspfNetLnkEntry 5 } rlOspfNetLnkAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state advertisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { rlOspfNetLnkEntry 6 } rlOspfNetLnkChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { rlOspfNetLnkEntry 7 } rlOspfNetLnkLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lenth in bytes of the LSA. This includes the 20 byte LSA header." ::= { rlOspfNetLnkEntry 8 } rlOspfNetLnkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address mask for the network." ::= { rlOspfNetLnkEntry 9 } rlOspfNetLnkAttRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Router IDs of each of the routers attached to the network." ::= { rlOspfNetLnkEntry 10 } -- OSPF Summary LSA (Type 3) rlOspfSumLnkTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOspfSumLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Summary Link State Advertisement for network (Type 3)." ::= { rlOspf 6 } rlOspfSumLnkEntry OBJECT-TYPE SYNTAX RlOspfSumLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry from Summary LSA." INDEX { rlOspfSumLnkAreaId, rlOspfSumLnkLsid, rlOspfSumLnkRouterId} ::= { rlOspfSumLnkTable 1 } RlOspfSumLnkEntry ::= SEQUENCE { rlOspfSumLnkAreaId AreaID, rlOspfSumLnkLsid IpAddress, rlOspfSumLnkRouterId RouterID, rlOspfSumLnkSequence Integer32, rlOspfSumLnkAge Integer32, rlOspfSumLnkChecksum Integer32, rlOspfSumLnkLength Unsigned32, rlOspfSumLnkMask IpAddress, rlOspfSumLnkMetric Unsigned32 } rlOspfSumLnkAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { rlOspfSumLnkEntry 1 } rlOspfSumLnkLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { rlOspfSumLnkEntry 2 } rlOspfSumLnkRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { rlOspfSumLnkEntry 3 } rlOspfSumLnkSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { rlOspfSumLnkEntry 4 } rlOspfSumLnkAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state advertisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { rlOspfSumLnkEntry 5 } rlOspfSumLnkChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { rlOspfSumLnkEntry 6 } rlOspfSumLnkLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lenth in bytes of the LSA. This includes the 20 byte LSA header." ::= { rlOspfSumLnkEntry 7 } rlOspfSumLnkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Value depends on the link's Type field." ::= { rlOspfSumLnkEntry 8 } rlOspfSumLnkMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of using this router link." ::= { rlOspfSumLnkEntry 9 } -- OSPF Summary LSA (Type 4) rlOspfAsbLnkTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOspfAsbLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Summary Link State Advertisement for ASBR (Type 4)." ::= { rlOspf 7 } rlOspfAsbLnkEntry OBJECT-TYPE SYNTAX RlOspfAsbLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry from Summary LSA." INDEX { rlOspfAsbLnkAreaId, rlOspfAsbLnkLsid, rlOspfAsbLnkRouterId} ::= { rlOspfAsbLnkTable 1 } RlOspfAsbLnkEntry ::= SEQUENCE { rlOspfAsbLnkAreaId AreaID, rlOspfAsbLnkLsid IpAddress, rlOspfAsbLnkRouterId RouterID, rlOspfAsbLnkSequence Integer32, rlOspfAsbLnkAge Integer32, rlOspfAsbLnkChecksum Integer32, rlOspfAsbLnkLength Unsigned32, rlOspfAsbLnkMetric Unsigned32 } rlOspfAsbLnkAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { rlOspfAsbLnkEntry 1 } rlOspfAsbLnkLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { rlOspfAsbLnkEntry 2 } rlOspfAsbLnkRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { rlOspfAsbLnkEntry 3 } rlOspfAsbLnkSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { rlOspfAsbLnkEntry 4 } rlOspfAsbLnkAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state advertisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { rlOspfAsbLnkEntry 5 } rlOspfAsbLnkChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { rlOspfAsbLnkEntry 6 } rlOspfAsbLnkLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lenth in bytes of the LSA. This includes the 20 byte LSA header." ::= { rlOspfAsbLnkEntry 7 } rlOspfAsbLnkMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of using this router link." ::= { rlOspfAsbLnkEntry 8 } -- OSPF External LSA rlOspfAseLnkTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOspfAseLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "External Link State Advertisement." ::= { rlOspf 8 } rlOspfAseLnkEntry OBJECT-TYPE SYNTAX RlOspfAseLnkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry from External LSA." INDEX { rlOspfAseLnkLsid, rlOspfAseLnkRouterId} ::= { rlOspfAseLnkTable 1 } RlOspfAseLnkEntry ::= SEQUENCE { rlOspfAseLnkLsid IpAddress, rlOspfAseLnkRouterId RouterID, rlOspfAseLnkSequence Integer32, rlOspfAseLnkAge Integer32, rlOspfAseLnkChecksum Integer32, rlOspfAseLnkLength Unsigned32, rlOspfAseLnkMask IpAddress, rlOspfAseLnkFrwAddress IpAddress, rlOspfAseLnkBitE INTEGER, rlOspfAseLnkMetric Unsigned32, rlOspfAseLnkTag Unsigned32 } rlOspfAseLnkLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { rlOspfAseLnkEntry 1 } rlOspfAseLnkRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { rlOspfAseLnkEntry 2 } rlOspfAseLnkSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { rlOspfAseLnkEntry 3 } rlOspfAseLnkAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state advertisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { rlOspfAseLnkEntry 4 } rlOspfAseLnkChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { rlOspfAseLnkEntry 5 } rlOspfAseLnkLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lenth in bytes of the LSA. This includes the 20 byte LSA header." ::= { rlOspfAseLnkEntry 6 } rlOspfAseLnkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Value depends on the link's Type field." ::= { rlOspfAseLnkEntry 7 } rlOspfAseLnkFrwAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router)." ::= { rlOspfAseLnkEntry 8 } rlOspfAseLnkBitE OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of external metric. If bit E is set, the metric specified is a Type 2 external metric." ::= { rlOspfAseLnkEntry 9 } rlOspfAseLnkMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of this route." ::= { rlOspfAseLnkEntry 10 } rlOspfAseLnkTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit field attached to each external route." ::= { rlOspfAseLnkEntry 11 } --Extention to ospfVirtIfTable rlospfVirtIfExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RlospfVirtIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Virtual Interface Table describes the virtual links that the OSPF Process is configured to carry on." ::= { rlOspf 9 } rlospfVirtIfExtEntry OBJECT-TYPE SYNTAX RlospfVirtIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF virtual interface table extension for md5 authentication" AUGMENTS { ospfVirtIfEntry } ::= { rlospfVirtIfExtTable 1 } RlospfVirtIfExtEntry ::= SEQUENCE { rlospfVirtifKeyChain DisplayString } rlospfVirtifKeyChain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the key-chain which ospf virtual interface uses for md5 authentication" ::= { rlospfVirtIfExtEntry 1 } END