LINKSYS-rlInterfaces DEFINITIONS ::= BEGIN -- Title: LINKSYS Switch Interfaces Private -- Version: 7.45 -- Date: 07 May 2006 -- 30-Nov-2004 Added type AutoNegCapabilitiesBits -- 30-Nov-2004 Added fields swIfAdminSpeedDuplexAutoNegotiationLocalCapabilities -- swIfOperSpeedDuplexAutoNegotiationLocalCapabilities -- swIfSpeedDuplexNegotiationRemoteCapabilities to swIfEntry -- 22-Nov-2005 Obsoleted field swIfPhysAddressType -- 22-Nov-2005 Added rlIfBaseMACAddressPerIfIndex -- 30-Oct-2005 Added swIfExtTable -- 30-Nov-2005 Added fields swIfAdminComboMode -- swIfOperComboMode swIfExtTable to swIfEntry -- 05-Dec-2005 Added rlFlowControlCascadeMode and rlFlowControlCascadeType -- 23-Feb-2005 Added rlFlowControlRxPerSystem -- 07-May-2006 Added rlCascadePortProtectionAction -- 04-Jun-2006 Added multiple-auth enum to swIfHostMode -- 11-Jun-2008 Added rlManagementIfIndex -- 06-Jun-2009 Added rlIfClearPortMacAddresses IMPORTS rnd, rlIfInterfaces FROM LINKSYS-MIB ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB PortList FROM Q-BRIDGE-MIB Unsigned32, Integer32, Counter32, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus, TruthValue, TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; swInterfaces MODULE-IDENTITY LAST-UPDATED "201304010000Z" -- April 1, 2013 ORGANIZATION "Linksys LLC." CONTACT-INFO "www.linksys.com/business/support" DESCRIPTION "The MIB module describes the private MIB for Switch Interfaces supported by Linksys MTS software and products." REVISION "201304010000Z" -- April 1, 2013 DESCRIPTION "Added MODULE-IDENTITY" ::= { rnd 43 } -- These bits can be set in any combination (except unknown) -- for field swIfAdminSpeedDuplexAutoNegotiationLocalCapabilities -- and will take affect when field swIfSpeedDuplexAutoNegotiation -- will be set to enabled. -- In addition these fields can be read for operative values of -- auto negotiation capabilities AutoNegCapabilitiesBits ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Auto negotiation capabilities bits." SYNTAX BITS { default(0), unknown(1), tenHalf(2), tenFull(3), fastHalf(4), fastFull(5), gigaHalf(6), gigaFull(7), tenGigaFull(8) } -- -- swTable -- swIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SwIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch media specific information and configuration of the device interfaces." ::= { swInterfaces 1 } swIfEntry OBJECT-TYPE SYNTAX SwIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each line in the swIfTable table." INDEX { swIfIndex } ::= { swIfTable 1 } SwIfEntry ::= SEQUENCE { swIfIndex INTEGER, swIfPhysAddressType INTEGER, swIfDuplexAdminMode INTEGER, swIfDuplexOperMode INTEGER, swIfBackPressureMode INTEGER, swIfTaggedMode INTEGER, swIfTransceiverType INTEGER, swIfLockAdminStatus INTEGER, swIfLockOperStatus INTEGER, swIfType INTEGER, swIfDefaultTag INTEGER, swIfDefaultPriority INTEGER, swIfStatus RowStatus, swIfFlowControlMode INTEGER, swIfSpeedAdminMode INTEGER, swIfSpeedDuplexAutoNegotiation INTEGER, swIfOperFlowControlMode INTEGER, swIfOperSpeedDuplexAutoNegotiation INTEGER, swIfOperBackPressureMode INTEGER, swIfAdminLockAction INTEGER, swIfOperLockAction INTEGER, swIfAdminLockTrapEnable TruthValue, swIfOperLockTrapEnable TruthValue, swIfOperSuspendedStatus TruthValue, swIfLockOperTrapCount INTEGER, swIfLockAdminTrapFrequency INTEGER, swIfReActivate TruthValue, swIfAdminMdix INTEGER, swIfOperMdix INTEGER, swIfHostMode INTEGER, swIfSingleHostViolationAdminAction INTEGER, swIfSingleHostViolationOperAction INTEGER, swIfSingleHostViolationAdminTrapEnable TruthValue, swIfSingleHostViolationOperTrapEnable TruthValue, swIfSingleHostViolationOperTrapCount INTEGER, swIfSingleHostViolationAdminTrapFrequency INTEGER, swIfLockLimitationMode INTEGER, swIfLockMaxMacAddresses INTEGER, swIfLockMacAddressesCount INTEGER, swIfAdminSpeedDuplexAutoNegotiationLocalCapabilities AutoNegCapabilitiesBits, swIfOperSpeedDuplexAutoNegotiationLocalCapabilities AutoNegCapabilitiesBits, swIfSpeedDuplexNegotiationRemoteCapabilities AutoNegCapabilitiesBits, swIfAdminComboMode INTEGER, swIfOperComboMode INTEGER, swIfAutoNegotiationMasterSlavePreference INTEGER } swIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the swIfTable. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIB II)." ::= { swIfEntry 1 } swIfPhysAddressType OBJECT-TYPE SYNTAX INTEGER { default(1), reserve(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION " This variable indicates whether the physical address assigned to this interface should be the default one or be chosen from the set of reserved physical addresses of the device." DEFVAL { default } ::= { swIfEntry 2 } swIfDuplexAdminMode OBJECT-TYPE SYNTAX INTEGER { none(1), half(2), full(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies whether this interface should operate in half duplex or full duplex mode. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 'none' is returned if a value of the variable hasn't been set." DEFVAL { none } ::= { swIfEntry 3 } swIfDuplexOperMode OBJECT-TYPE SYNTAX INTEGER { half(1), full(2), hybrid(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " This variable indicates whether this interface operates in half duplex or full duplex mode. This variable can have the values hybrid or unknown only for a trunk. unknown - only if trunk operative status is not present." ::= { swIfEntry 4 } swIfBackPressureMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether this interface activates back pressure when congested." ::= { swIfEntry 5 } swIfTaggedMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enable, this interface operates in tagged mode, i.e all frames sent out through this interface will have the 802.1Q header. If disabled the frames will not be tagged." DEFVAL { disable } ::= { swIfEntry 6 } swIfTransceiverType OBJECT-TYPE SYNTAX INTEGER { regular(1), fiberOptics(2), comboRegular(3), comboFiberOptics(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " This variable indicates the transceiver type of this interface." ::= { swIfEntry 7 } swIfLockAdminStatus OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether this interface should operate in locked or unlocked mode. In unlocked mode the device learns all MAC addresses from this port and forwards all frames arrived at this port. In locked mode no new MAC addresses are learned and only frames with known source MAC addresses are forwarded." DEFVAL { unlocked } ::= { swIfEntry 8 } swIfLockOperStatus OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable defines whether this interface operates in locked or unlocked mode. It is locked in each of the following two cases: 1) if swLockAdminStatus is set to locked 2) no IP/IPX interface is defined over this interface and no VLAN contains this interface. In unlocked mode the device learns all MAC addresses from this port and forwards all frames arrived at this port. In locked mode no new MAC addresses are learned and only frames with known source MAC addresses are forwarded." ::= { swIfEntry 9 } swIfType OBJECT-TYPE SYNTAX INTEGER { eth10M(1), eth100M(2), eth1000M(3), eth10G(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " This variable specifies the type of interface." ::= { swIfEntry 10 } swIfDefaultTag OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable specifies the default VLAN tag which will be attached to outgoing frames if swIfTaggedMode for this interface is enabled." DEFVAL { 0 } ::= { swIfEntry 11 } swIfDefaultPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " This variable specifies the default port priority." DEFVAL { 0 } ::= { swIfEntry 12 } swIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { swIfEntry 13 } swIfFlowControlMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), autoNegotiation(3), enabledRx(4), enabledTx(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "on - Flow control will be enabled on this interface according to the IEEE 802.3x standard. off - Flow control is disabled. autoNegotiation - Flow control will be enabled or disabled on this interface. If enabled, it will operate as specified by the IEEE 802.3x standard. enabledRx - Flow control will be enabled on this interface for recieved frames. enabledTx - Flow control will be enabled on this interface for transmitted frames. An attempt to set this object to 'enabledRx(4)' or 'enabledTx(5)' will fail on interfaces that do not support operation at greater than 100 Mb/s. In any case, flow control can work only if swIfDuplexOperMode is full." ::= { swIfEntry 14} swIfSpeedAdminMode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies the required speed of this interface in bits per second. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set." DEFVAL { 0 } ::= { swIfEntry 15 } swIfSpeedDuplexAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled the speed and duplex mode will be set by the device through the autonegotiation process. Otherwise these characteristics will be set according to the values of swIfSpeedAdminMode and swIfSpeedDuplexAutoNegotiation." ::= { swIfEntry 16 } swIfOperFlowControlMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), enabledRx(3), enabledTx(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "on - Flow control is enabled on this interface according to the IEEE 802.3x standard. off - Flow control is disabled. enabledRx - Flow control is enabled on this interface for recieved frames. enabledTx - Flow control is enabled on this interface for transmitted frames." ::= { swIfEntry 17} swIfOperSpeedDuplexAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), hybrid(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "If enabled the speed and duplex are determined by the device through the autonegotiation process. If disabled these characteristics are determined according to the values of swIfSpeedAdminMode and swIfDuplexAdminMode. hybrid - only for a trunk. unknown - only for ports that there operative status is not present." ::= { swIfEntry 18 } swIfOperBackPressureMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), hybrid(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the operative back pressure mode of this interface." ::= { swIfEntry 19 } swIfAdminLockAction OBJECT-TYPE SYNTAX INTEGER { discard(1), forwardNormal(2), discardDisable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates which action this interface should be taken in locked mode and therefore relevant only in locked mode. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port." --DEFVAL { discard } changed to product specific ::= { swIfEntry 20 } swIfOperLockAction OBJECT-TYPE SYNTAX INTEGER { discard(1), forwardNormal (2), discardDisable(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates which action this interface actually takes in locked mode and therefore relevant only in locked mode. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port." ::= { swIfEntry 21 } swIfAdminLockTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether to create a SNMP trap in the locked mode." --DEFVAL { false } changed to product specific ::= { swIfEntry 22 } swIfOperLockTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates whether a SNMP trap can be created in the locked mode." ::= { swIfEntry 23 } swIfOperSuspendedStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates whether the port is suspended or not due to some feature. After reboot this value is false" ::= { swIfEntry 24 } swIfLockOperTrapCount OBJECT-TYPE SYNTAX INTEGER (0 .. 2147483647 ) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the trap counter status per ifIndex (i.e. number of received packets since the last trap sent due to a packet which was received on this ifIndex). It's relevant only in locked mode while trap is enabled." ::= { swIfEntry 25 } swIfLockAdminTrapFrequency OBJECT-TYPE SYNTAX INTEGER (1 .. 1000000) -- UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the minimal frequency (in seconds) of sending a trap per ifIndex. It's relevant only in locked mode and in trap enabled." --DEFVAL { 10 } changed to product specific ::= { swIfEntry 26 } swIfReActivate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable reactivates (enables) an ifIndex (which was suspended)" DEFVAL { false } ::= { swIfEntry 27 } swIfAdminMdix OBJECT-TYPE SYNTAX INTEGER { cross(1), normal(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration is on a physical port, not include trunks. cross - The interface should force crossover. normal - The interface should not force crossover. auto - Auto mdix is enabled on the interface." ::= { swIfEntry 28 } swIfOperMdix OBJECT-TYPE SYNTAX INTEGER { cross(1), normal(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "cross - The interface is in crossover mode. normal - The interface is not in crossover mode. unknown - Only for port that its operative status is not present or down." ::= { swIfEntry 29 } swIfHostMode OBJECT-TYPE SYNTAX INTEGER { single(1), multiple(2), multiple-auth(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the 802.1X host mode of a port. Relevant when the port's 802.1X control is auto. In addtion multiple-auth was added." DEFVAL { single } ::= { swIfEntry 30 } swIfSingleHostViolationAdminAction OBJECT-TYPE SYNTAX INTEGER { discard(1), forwardNormal (2), discardDisable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates which action this interface should take in single authorized. Possible actions: discard - every packet is dropped. forwardNormal - every packet is forwarded according to the DST address. discardDisable - drops the first packet and suspends the port." DEFVAL { discard } ::= { swIfEntry 31 } swIfSingleHostViolationOperAction OBJECT-TYPE SYNTAX INTEGER { discard(1), forwardNormal (2), discardDisable(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates which action this interface actually takes in single authorized. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port." DEFVAL { discard } ::= { swIfEntry 32 } swIfSingleHostViolationAdminTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether to create a SNMP trap in single authorized." DEFVAL { false } ::= { swIfEntry 33 } swIfSingleHostViolationOperTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates whether a SNMP trap can be created in the single authorized." ::= { swIfEntry 34 } swIfSingleHostViolationOperTrapCount OBJECT-TYPE SYNTAX INTEGER (0 .. 2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the trap counter status per ifIndex (i.e. number of received packets since the last trap sent due to a packet which was received on this ifIndex). It's relevant only in single authorized while trap is enabled." ::= { swIfEntry 35 } swIfSingleHostViolationAdminTrapFrequency OBJECT-TYPE SYNTAX INTEGER (0 .. 1000000) -- UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the minimal frequency (in seconds) of sending a trap per ifIndex. It's relevant only in single authorized and in trap enabled. A value of 0 means that trap is disabled." DEFVAL { 0 } ::= { swIfEntry 36 } swIfLockLimitationMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), dynamic(2), secure-permanent(3), secure-delete-on-reset(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates what is the learning limitation on the locked interface. Possible values: disabled - learning is stopped. The dynamic addresses associated with the port are not aged out or relearned on other port as long as the port is locked. dynamic - dynamic addresses can be learned up to the maximum dynamic addresses allowed on the port. Relearning and aging of the dynamic addresses are enabled. The learned addresses aren't kept after reset. secure-permanent - secure addresses can be learned up to the maximum addresses allowed on the port. Relearning and aging of addresses are disabled. The learned addresses are kept after reset. secure-delete-on-reset - secure addresses can be learned up to the maximum addresses allowed on the port. Relearning and aging of addresses are disabled. The learned addresses are not kept after reset." --DEFVAL { disabled } changed to product specific ::= { swIfEntry 37 } swIfLockMaxMacAddresses OBJECT-TYPE SYNTAX INTEGER (0 .. 2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable defines the maximum number of dynamic addresses that can be asscoiated with the locked interface. It isn't relevant in disabled limitation mode." DEFVAL { 1 } ::= { swIfEntry 38 } swIfLockMacAddressesCount OBJECT-TYPE SYNTAX INTEGER (0 .. 2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the actual number of dynamic addresses that can be asscoiated with the locked interface. It isn't relevant in disabled limitation mode." ::= { swIfEntry 39 } swIfAdminSpeedDuplexAutoNegotiationLocalCapabilities OBJECT-TYPE SYNTAX AutoNegCapabilitiesBits MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative auto negotiation capabilities of the interface that can be advertised when swIfSpeedDuplexAutoNegotiation is enabled. default bit means advertise all the port's capabilities according to its type." DEFVAL { {default} } ::= { swIfEntry 40 } swIfOperSpeedDuplexAutoNegotiationLocalCapabilities OBJECT-TYPE SYNTAX AutoNegCapabilitiesBits MAX-ACCESS read-only STATUS current DESCRIPTION "Operative auto negotiation capabilities of the remote link. unknown bit means that port operative status is not up." ::= { swIfEntry 41 } swIfSpeedDuplexNegotiationRemoteCapabilities OBJECT-TYPE SYNTAX AutoNegCapabilitiesBits MAX-ACCESS read-only STATUS current DESCRIPTION "Operative auto negotiation capabilities of the remote link. unknown bit means that port operative status is not up, or auto negotiation process not complete, or remote link is not auto negotiation able." ::= { swIfEntry 42 } swIfAdminComboMode OBJECT-TYPE SYNTAX INTEGER { force-fiber(1), force-copper(2), prefer-fiber(3), prefer-copper(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies the administrative mode of a combo Ethernet interface." DEFVAL { prefer-fiber } ::= { swIfEntry 43 } swIfOperComboMode OBJECT-TYPE SYNTAX INTEGER { fiber(1), copper(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable specifies the operative mode of a combo Ethernet interface." ::= { swIfEntry 44 } swIfAutoNegotiationMasterSlavePreference OBJECT-TYPE SYNTAX INTEGER { preferMaster(1), preferSlave(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies the administrative mode of the Maste-Slave preference in auto negotiation." -- DEFVAL - according to MTSC parameter ::= { swIfEntry 45 } -- -- swIfMibVersion -- swIfMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The swIfTable Mib's version, the current version is 3." ::= { swInterfaces 2 } -- -- swIfPortLockSupport -- swIfPortLockSupport OBJECT-TYPE SYNTAX INTEGER { supported (1), notSupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "indicates if the locked port package is supported." ::= { swInterfaces 3 } -- -- swIfPortLockActionSupport -- swIfPortLockActionSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "indicates which port lock actions are supported: (bit 0 is the most significant bit) bit 0 - discard bit 1 - forwardNormal bit 2 - discardDisable" ::= { swInterfaces 4 } -- -- swIfPortLockTrapSupport -- swIfPortLockTrapSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "indicates with which port lock actions the trap option is supported (e.g. discard indicates that trap is supported only when the portlock action is discard): (bit 0 is the most significant bit) bit 0 - discard bit 1 - forwardNormal bit 2 - discardDisable" ::= { swInterfaces 5 } -- -- swIfPortLockIfRangeTable -- swIfPortLockIfRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF SwIfPortLockIfRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port lock interfaces range configuration" ::= { swInterfaces 6 } swIfPortLockIfRangeEntry OBJECT-TYPE SYNTAX SwIfPortLockIfRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each line in the swIfPortLockIfRangeTable table." INDEX { swIfPortLockIfRangeIndex } ::= { swIfPortLockIfRangeTable 1 } SwIfPortLockIfRangeEntry ::= SEQUENCE { swIfPortLockIfRangeIndex INTEGER, swIfPortLockIfRange PortList, swIfPortLockIfRangeLockStatus INTEGER, swIfPortLockIfRangeAction INTEGER, swIfPortLockIfRangeTrapEn TruthValue, swIfPortLockIfRangeTrapFreq INTEGER } swIfPortLockIfRangeIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the swIfPortLockIfRangeTable." ::= { swIfPortLockIfRangeEntry 1 } swIfPortLockIfRange OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The set of interfaces to which the port lock parameters should be configured" ::= { swIfPortLockIfRangeEntry 2 } swIfPortLockIfRangeLockStatus OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the interfaces range should operate in locked or unlocked mode. In unlocked mode the device learns all MAC addresses from these interfaces and forwards all frames arrived at these interfaces. In locked mode no new MAC addresses are learned and only frames with known source MAC addresses are forwarded." DEFVAL { unlocked } ::= { swIfPortLockIfRangeEntry 3 } swIfPortLockIfRangeAction OBJECT-TYPE SYNTAX INTEGER { discard(1), forwardNormal(2), discardDisable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates which action for these interfaces should be take in locked mode and therefore relevant only in locked mode. Possible actions: discard(1) - every packet is dropped. forwardNormal(2) - every packet is forwarded according to the DST address. discardDisable(3) - drops the first packet and suspends the port." --DEFVAL { discard } changed to product specific ::= { swIfPortLockIfRangeEntry 4 } swIfPortLockIfRangeTrapEn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether to create a SNMP trap in the locked mode." --DEFVAL { false } changed to product specific ::= { swIfPortLockIfRangeEntry 5 } swIfPortLockIfRangeTrapFreq OBJECT-TYPE SYNTAX INTEGER (1 .. 1000000) -- UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the minimal frequency (in seconds) of sending a trap for these interfaces. It's relevant only in locked mode and in trap enabled." --DEFVAL { 10 } changed to product specific ::= { swIfPortLockIfRangeEntry 6 } -- -- swIfExtTable -- swIfExtTable OBJECT-TYPE SYNTAX SEQUENCE OF SwIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Display information and configuration of the device interfaces." ::= { swInterfaces 7 } swIfExtEntry OBJECT-TYPE SYNTAX SwIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each row in the swIfExtTable." INDEX { ifIndex } ::= { swIfExtTable 1 } SwIfExtEntry ::= SEQUENCE { swIfExtSFPSpeed INTEGER } swIfExtSFPSpeed OBJECT-TYPE SYNTAX INTEGER { default(1), eth100M(2), eth1G(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure speed of an SFP Ethernet interface." DEFVAL { default } ::= { swIfExtEntry 1 } -- -- rlIfInterfaces -- rlIfMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 1." ::= { rlIfInterfaces 1 } rlIfNumOfPhPorts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of physical ports on this device (including all stack units)" ::= { rlIfInterfaces 2 } rlIfMapOfOnPhPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Each bit in this octet string indicates that the correspondig port's ifOperStatus is ON if set. The mapping of port number to bits in this octet string is as follows: The port with the L2 interface number 1 is mapped to the least significant bit of the 1st octet, the port with L2 ifNumber 2 to the next significant bit in the 1st octet, port 8 to the most-significant bit of the in the 1st octet, port 9 to the least significant bit of the 2nd octet, etc. and in general, port n to bit corresponding to 2**((n mod 8) -1) in byte n/8 + 1" ::= { rlIfInterfaces 3 } rlIfClearPortMibCounters OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Each bit that is set in this portList represent a port that its mib counters should be reset." ::= { rlIfInterfaces 4 } rlIfNumOfUserDefinedPorts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user defined ports on this device." ::= { rlIfInterfaces 5 } rlIfFirstOutOfBandIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "First ifIndex of out-of-band port. This scalar exists only the device has out of band ports." ::= { rlIfInterfaces 6 } rlIfNumOfLoopbackPorts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback ports on this device." ::= { rlIfInterfaces 7 } rlIfFirstLoopbackIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "First ifIndex of loopback port. This scalar will exists only if rlIfNumOfLoopbackPorts is different from 0." ::= { rlIfInterfaces 8 } rlIfExistingPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates which ports/trunks exist in the system. It doesn't indicate which are present." ::= { rlIfInterfaces 9 } rlIfBaseMACAddressPerIfIndex OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if the system will assign a unique MAC per Ethernet port or not." ::= { rlIfInterfaces 10 } rlFlowControlCascadeMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enable disable flow control on cascade ports" ::= { rlIfInterfaces 11 } rlFlowControlCascadeType OBJECT-TYPE SYNTAX INTEGER { internalonly(1), internalexternal(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "define which type of ports will be affected by flow control on cascade ports" ::= { rlIfInterfaces 12 } rlFlowControlRxPerSystem OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "define if flow control RX is supported per system." ::= { rlIfInterfaces 13 } rlCascadePortProtectionAction OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "As a result of this set all of the local cascade ports will stop being consider unstable and will be force up." ::= { rlIfInterfaces 14 } rlManagementIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Specify L2 bound management interface index in a single IP address system when configurable management interface is supported." ::= { rlIfInterfaces 15 } rlIfClearStackPortsCounters OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "As a result of this set all counters of all external cascade ports will be cleared." ::= { rlIfInterfaces 16 } rlIfClearPortMacAddresses OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "if port is non secure, its all dynamic MAC addresses are cleared. if port is secure, its all secure MAC addresses which have learned or configured are cleared." ::= { rlIfInterfaces 17 } rlIfCutThroughPacketLength OBJECT-TYPE SYNTAX INTEGER (257 .. 16383) MAX-ACCESS read-write -- Obsolete STATUS current DESCRIPTION "The default packet length that is assigned to a packet in the Cut-Through mode." DEFVAL { 1522 } ::= { rlIfInterfaces 18 } rlIfCutPriorityZero OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 0." DEFVAL { false } ::= { rlIfInterfaces 19 } rlIfCutPriorityOne OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 1." DEFVAL { false } ::= { rlIfInterfaces 20 } rlIfCutPriorityTwo OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 2." DEFVAL { false } ::= { rlIfInterfaces 21 } rlIfCutPriorityThree OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 3." DEFVAL { false } ::= { rlIfInterfaces 22 } rlIfCutPriorityFour OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 4." DEFVAL { false } ::= { rlIfInterfaces 23 } rlIfCutPriorityFive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 5." DEFVAL { false } ::= { rlIfInterfaces 24 } rlIfCutPrioritySix OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 6." DEFVAL { false } ::= { rlIfInterfaces 25 } rlIfCutPrioritySeven OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-Through for priority 7." DEFVAL { false } ::= { rlIfInterfaces 26 } rlIfCutThroughTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIfCutThroughEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information and configuration of cut-through feature." ::= { rlIfInterfaces 27 } rlIfCutThroughEntry OBJECT-TYPE SYNTAX RlIfCutThroughEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each line in the swIfTable table." INDEX { swIfIndex } ::= { rlIfCutThroughTable 1 } RlIfCutThroughEntry ::= SEQUENCE { rlIfCutThroughPriorityEnable TruthValue, rlIfCutThroughUntaggedEnable TruthValue, rlIfCutThroughOperMode TruthValue } rlIfCutThroughPriorityEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-through for a priority for an interface." DEFVAL { false } ::= { rlIfCutThroughEntry 1 } rlIfCutThroughUntaggedEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cut-through for untagged packets for an interface." DEFVAL { false } ::= { rlIfCutThroughEntry 2 } rlIfCutThroughOperMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Operational mode of spesific cut-through interface." ::= { rlIfCutThroughEntry 3 } rlCutThroughPacketLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The default packet length that is assigned to a packet in the Cut-Through mode." ::= { rlIfInterfaces 28 } rlCutThroughPacketLengthAfterReset OBJECT-TYPE SYNTAX INTEGER (257 .. 16383) MAX-ACCESS read-write STATUS current DESCRIPTION "The default packet length that is assigned to a packet in the Cut-Through mode after reset." DEFVAL { 1522 } ::= { rlIfInterfaces 29 } rlCutThroughEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Cut-Through global enable mode." ::= { rlIfInterfaces 30 } rlCutThroughEnableAfterReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Cut-Through global enable mode after reset." DEFVAL { false } ::= { rlIfInterfaces 31 } rlFlowControlMode OBJECT-TYPE SYNTAX INTEGER { send-receive(1), receive-only(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Define which mode will be enabled on flow control enabled ports. The interfaces with enabled flow control will receive pause frames, but will not send flow control pause frames Send-receive: The interfaces with enabled flow control will receive and send pause frames. Receive-only: The interfaces with enabled flow control will receive pause frames, but will not send flow control pause frames." ::= { rlIfInterfaces 32 } END