LINKSYS-vlanVoice-MIB DEFINITIONS ::= BEGIN IMPORTS vlan FROM LINKSYS-vlan-MIB TruthValue, RowStatus,MacAddress, DisplayString FROM SNMPv2-TC ifIndex FROM IF-MIB MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI VlanIndex FROM Q-BRIDGE-MIB VlanPriority FROM LINKSYS-MIB; vlanVoice MODULE-IDENTITY LAST-UPDATED "201001090000Z" ORGANIZATION "Linksys LLC." CONTACT-INFO "Linksys.com" DESCRIPTION "The private MIB module definition for voice vlan support in Linksys devices." REVISION "201009260000Z" DESCRIPTION "Editorial changes to support new MIB compilers." REVISION "201009260000Z" DESCRIPTION "Initial version of this MIB." ::= { vlan 54 } -- voice vlan -- start from 6 since 1..5 are deprecated voice vlanVoiceAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(0), auto-enabled(1), auto-triggered(2), oui-enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " administrative voice vlan status " ::= { vlanVoice 6 } vlanVoiceOperState OBJECT-TYPE SYNTAX INTEGER { disabled(0), auto-enabled(1), auto-triggered(2), oui-enabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " operational voice vlan status " ::= { vlanVoice 7 } vlanVoiceAdminVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "1-4094 actual vlan (must exist in dot1qvlan static table)" DEFVAL { 1 } ::= { vlanVoice 8 } vlanVoiceOperVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION " operational Voice Vlan ID" ::= { vlanVoice 9 } -- Voice VLAN local configuration configuration Table vlanVoiceUcDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanVoiceUcDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static default and UC directly connected to device configuration." ::= { vlanVoice 10 } vlanVoiceUcDeviceEntry OBJECT-TYPE SYNTAX VlanVoiceUcDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static and dynamic per port information for a voice VLAN." INDEX { vlanVoiceUcDeviceType, vlanVoiceUcDeviceMacAddress, vlanVoiceUcDeviceInterface } ::= { vlanVoiceUcDeviceTable 1 } VlanVoiceUcDeviceEntry ::= SEQUENCE { vlanVoiceUcDeviceType INTEGER { default(0), static(1), uc(2) }, vlanVoiceUcDeviceMacAddress MacAddress, vlanVoiceUcDeviceInterface INTEGER, vlanVoiceUcDeviceVid INTEGER (1..4094), vlanVoiceUcDeviceVpt INTEGER (0..7), vlanVoiceUcDeviceDscp INTEGER (0..63), vlanVoiceUcDeviceIsBest TruthValue } vlanVoiceUcDeviceType OBJECT-TYPE SYNTAX INTEGER { default(0), static(1), uc(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "type of entry" ::= { vlanVoiceUcDeviceEntry 1 } vlanVoiceUcDeviceMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac address of UC" ::= { vlanVoiceUcDeviceEntry 2 } vlanVoiceUcDeviceInterface OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Mac interface on which UC is connected" ::= { vlanVoiceUcDeviceEntry 3 } vlanVoiceUcDeviceVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The Voice Vlan ID" ::= { vlanVoiceUcDeviceEntry 4 } vlanVoiceUcDeviceVpt OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The entry VPT" ::= { vlanVoiceUcDeviceEntry 5 } vlanVoiceUcDeviceDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The entry DSCP value" ::= { vlanVoiceUcDeviceEntry 6 } vlanVoiceUcDeviceIsBest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this entry is used as best local configuration" ::= { vlanVoiceUcDeviceEntry 7 } -- voice vlan auto vlanVoiceAuto OBJECT IDENTIFIER ::= { vlanVoice 11 } -- voice vlan auto admin vlanVoiceAutoAdmin OBJECT IDENTIFIER ::= { vlanVoiceAuto 1 } vlanVoiceAutoAdminVpt OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "user configured VPT for Voice Vlan operation" DEFVAL { 0 } ::= { vlanVoiceAutoAdmin 1 } vlanVoiceAutoAdminDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "user configured DSCP for Voice Vlan operation" DEFVAL { 0 } ::= { vlanVoiceAutoAdmin 2 } -- voice vlan auto oper vlanVoiceAutoOper OBJECT IDENTIFIER ::= { vlanVoiceAuto 2 } vlanVoiceAutoOperVpt OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-only STATUS current DESCRIPTION "operational VPT for Voice Vlan operation" ::= { vlanVoiceAutoOper 1 } vlanVoiceAutoOperDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "user configured DSCP for Voice Vlan operation" ::= { vlanVoiceAutoOper 2 } vlanVoiceAutoOperSource OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Mac address of the switch by which we've selected the VVID" ::= {vlanVoiceAutoOper 3 } vlanVoiceAutoOperPriority OBJECT-TYPE SYNTAX INTEGER { staticActive(0), -- VVID selected according to user configuration of an active device staticInActive(1), -- VVID selected according to user configuration of an inactive device ucActive(2), -- VVID selected according to UC device + UC device is active ucInActive(3), -- VVID selected according to UC device + UC device is inactive default(6), -- VVID is at default (no UC device + no static configuration in lan) disabled(10) -- Voice Vlan is disabled } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for which Voice Vlan ID was selected." ::= { vlanVoiceAutoOper 4 } vlanVoiceAutoRefresh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the MIB to True, VSDP refresh will be executed." ::= { vlanVoiceAuto 3 } vlanVoiceAutoAgreedVlanLastChange OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) MAX-ACCESS read-only STATUS current DESCRIPTION "date format is DDMMYYHHMMSS" ::= { vlanVoiceAuto 4 } -- voice vlan OUI vlanVoiceOUIBased OBJECT IDENTIFIER ::= { vlanVoice 12 } vlanVoiceOUIBasedAdminPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge." DEFVAL { 6 } ::= { vlanVoiceOUIBased 1 } vlanVoiceOUIBasedAdminRemark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Remark VPT on tagged frames egress the voice vlan according. to priority true.false" DEFVAL { false } ::= { vlanVoiceOUIBased 2 } vlanVoiceOUIBasedSetToDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The vlanVoiceOUIBasedSetToDefault indicates that vlanVoiceOUIBasedTable should be set to it's default values if existed (OUI default prefixes). To do so the vlanVoiceOUIBasedTable should be previously deleted by usual entries destroying. This object behaviors as write-only than reading this object will always return 'false'." DEFVAL{ false } ::= { vlanVoiceOUIBased 3 } -- Voice VLAN OUI Table vlanVoiceOUIBasedTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanVoiceOUIBasedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static global configuration information for Voice VLANs OUI MAC Prefixes. All entries are permanent and will be restored after the device is reset." ::= { vlanVoiceOUIBased 4 } vlanVoiceOUIBasedEntry OBJECT-TYPE SYNTAX VlanVoiceOUIBasedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information for a voice VLANs OUI MAC Prefixes configured into the device by management." INDEX { vlanVoiceOUIBasedPrefix } ::= { vlanVoiceOUIBasedTable 1 } VlanVoiceOUIBasedEntry ::= SEQUENCE { vlanVoiceOUIBasedPrefix OCTET STRING, vlanVoiceOUIBasedDescription DisplayString, vlanVoiceOUIBasedEntryRowStatus RowStatus } vlanVoiceOUIBasedPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUIBasedTable. Voice VLANs OUI Prefix is the first 3 most significant octets of the MAC address." ::= { vlanVoiceOUIBasedEntry 1 } vlanVoiceOUIBasedDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "An optional text that describes the OUI." DEFVAL {""} ::= { vlanVoiceOUIBasedEntry 2 } vlanVoiceOUIBasedEntryRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { vlanVoiceOUIBasedEntry 3 } -- Voice VLAN per Port configuration Table vlanVoiceOUIBasedPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanVoiceOUIBasedPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static and dynamic per port configuration information for Voice VLAN. All entries are permanent and will be restored after the device is reset." ::= { vlanVoiceOUIBased 5 } vlanVoiceOUIBasedPortEntry OBJECT-TYPE SYNTAX VlanVoiceOUIBasedPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static and dynamic per port information for a voice VLAN." INDEX { ifIndex } ::= { vlanVoiceOUIBasedPortTable 1 } VlanVoiceOUIBasedPortEntry ::= SEQUENCE { vlanVoiceOUIBasedPortEnable TruthValue, vlanVoiceOUIBasedPortVlanIndex VlanIndex, vlanVoiceOUIBasedPortSecure TruthValue, vlanVoiceOUIBasedPortCurrentMembership INTEGER {active(1),notActive(2)}, vlanVoiceOUIBasedPortQosMode INTEGER {src(1),all(2)} } vlanVoiceOUIBasedPortEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable this port to be a candidate to be added into the Voice VLAN." DEFVAL{ false } ::= { vlanVoiceOUIBasedPortEntry 1 } vlanVoiceOUIBasedPortVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The Voice VLAN-ID the port is a candidate to be in." DEFVAL{ 4095 } ::= { vlanVoiceOUIBasedPortEntry 2 } vlanVoiceOUIBasedPortSecure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped." DEFVAL{ false } ::= { vlanVoiceOUIBasedPortEntry 3 } vlanVoiceOUIBasedPortCurrentMembership OBJECT-TYPE SYNTAX INTEGER { active(1), notActive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that port is a candidate to be in Voice VLAN or disabled." ::= { vlanVoiceOUIBasedPortEntry 4 } vlanVoiceOUIBasedPortQosMode OBJECT-TYPE SYNTAX INTEGER { src(1), all(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan." ::= { vlanVoiceOUIBasedPortEntry 5 } vlanVoiceOUIBasedAgingTimeout OBJECT-TYPE SYNTAX INTEGER (1..43200) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The vlanVoiceAgingTimeout indicates the time (in units of minutes) from when the last OUI MAC was ageout from the FDB the port will be removed from the Voice VLAN. The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours). The value of this object must be restored from non-volatile storage after a re-initialization of the management system." DEFVAL { 1440 } ::= { vlanVoiceOUIBased 6 } END