NBS-ROADM-MIB DEFINITIONS ::= BEGIN IMPORTS Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI InterfaceIndex, ifAlias FROM IF-MIB nbs, NbsTcMilliDb, NbsTcMHz, NbsTcStagingCommit FROM NBS-MIB DisplayString, RowStatus FROM SNMPv2-TC; nbsRoadmMib MODULE-IDENTITY LAST-UPDATED "201504300000Z" -- April 30, 2015 ORGANIZATION "NBS" CONTACT-INFO "For technical support, please contact your service channel" DESCRIPTION "Reconfigurable Optical Add/Drop Multiplexing" ::= { nbs 235 } -- ******************************************************************* -- NBS-ROADM-MIB local defines -- ******************************************************************* nbsRoadmCommonGrp OBJECT-IDENTITY STATUS current DESCRIPTION "Channels per Common port" ::= { nbsRoadmMib 10 } nbsRoadmFlexgridGrp OBJECT-IDENTITY STATUS current DESCRIPTION "Describes Flexgrid centerline and bandwidth capabilities " ::= { nbsRoadmMib 20 } nbsRoadmStagingGrp OBJECT-IDENTITY STATUS current DESCRIPTION "Scratchpad for users to configure channels and WSS setup" ::= { nbsRoadmMib 30 } nbsRoadmCommittedGrp OBJECT-IDENTITY STATUS current DESCRIPTION "Administratively active channel and WSS setup." ::= { nbsRoadmMib 31 } nbsRoadmRedundantGrp OBJECT-IDENTITY STATUS current DESCRIPTION "Current active port." ::= { nbsRoadmMib 32 } nbsRoadmTraps OBJECT-IDENTITY STATUS current DESCRIPTION "SNMP Traps or Notifications" ::= { nbsRoadmMib 100 } nbsRoadmEvent OBJECT-IDENTITY STATUS current DESCRIPTION "Event Notification Definitions" ::= { nbsRoadmTraps 0 } -- ******************************************************************* -- -- the nbsRoadmCommonGrp -- -- ******************************************************************* nbsRoadmCommonTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in nbsRoadmCommonTable" ::= { nbsRoadmCommonGrp 1 } nbsRoadmCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF NbsRoadmCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WSS Switch Configuration" ::= { nbsRoadmCommonGrp 2 } NbsRoadmCommonEntry ::= SEQUENCE { nbsRoadmCommonIfIndex InterfaceIndex, nbsRoadmCommonStagingQuickCfg INTEGER, nbsRoadmCommonStagingCommit NbsTcStagingCommit, nbsRoadmCommonStagingAddCaps INTEGER, nbsRoadmCommonStagingDropCaps INTEGER, nbsRoadmCommonCommittedGridType INTEGER, nbsRoadmCommonCommittedChannels INTEGER } nbsRoadmCommonEntry OBJECT-TYPE SYNTAX NbsRoadmCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { nbsRoadmCommonIfIndex } ::= { nbsRoadmCommonTable 1 } nbsRoadmCommonIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's trunk port." ::= { nbsRoadmCommonEntry 1 } nbsRoadmCommonStagingQuickCfg OBJECT-TYPE SYNTAX INTEGER { notSupported (1), supported (2), std100Ghz (3), std50Ghz (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse object used to replace this port's current nbsRoadmStagingTable entries with a known configuration. Users may create the nbsRoadmStagingTable manually, a row at a time. Often it would save the users much work if they could initially populate this table with a standard or known configuration and then customize it to their own requirements. When read, this object will indicate whether this feature is available by reporting either notSupported(1) or supported(2). The value std100Ghz(3) overwrites this port's nbsRoadmStagingTable with all the standard 100 GHz ITU grid channels which are supported by this port. The value std50Ghz(4) overwrites this port's nbsRoadmStagingTable with all the standard 50 GHz ITU grid channels which are supported by this port. Overwriting the nbsRoadmStagingTable entries has no effect on the live configuration until committed using nbsRoadmCommonStagingCommit" ::= { nbsRoadmCommonEntry 10 } nbsRoadmCommonStagingAddCaps OBJECT-TYPE SYNTAX INTEGER { notSupported (1), capable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if this port is capable of Add" ::= { nbsRoadmCommonEntry 13 } nbsRoadmCommonStagingDropCaps OBJECT-TYPE SYNTAX INTEGER { notSupported (1), capable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if this port is capable of Drop" ::= { nbsRoadmCommonEntry 14 } nbsRoadmCommonStagingCommit OBJECT-TYPE SYNTAX NbsTcStagingCommit MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse object used to rewrite the entire WSS configuration. In order to protect users against accidentally dropping traffic streams, a two-step process is used. In the first step, users 'stage' a WSS configuration. The nbsRoadmStagingTable is like a scratchpad where users can build and modify the entire WSS configuration without affecting the live network. Here users assign channels to WSS ports, and for flex-grids, define the channels. The second step is to replace the existing WSS configuration (which can be read from the nbsRoadmCommittedTable). To replace the existing setup with the configuration specified in the nbsRoadmStagingTable, users set this object to apply(4). To discard all changes done to nbsRoadmStagingTable, users set this object to revertToCommitted(3), which will synchronize the Staging table to the Staged configuation. When read, this object will report the action last requested until that action is completed, after which it will report supported(2)." ::= { nbsRoadmCommonEntry 20 } nbsRoadmCommonCommittedGridType OBJECT-TYPE SYNTAX INTEGER { notSupported (1), reserved (2), customized (3), std100Ghz (4), std50Ghz (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is automatically updated in association with writes to nbsRoadmCommonStagingApply. It indicates whether or not this port's updated nbsRoadmCommittedTable is equivalent to a standard ITU grid such as would come from nbsRoadmCommonStagingQuickCfg. If the nbsRoadmCommittedTable matches the results from a nbsRoadmCommonStagingQuickCfg of std100Ghz(4), then this object will report std100Ghz(4). If the nbsRoadmCommittedTable matches the results from a nbsRoadmCommonStagingQuickCfg of std50Ghz(5), then this object will report std50Ghz(5). If the nbsRoadmCommittedTable matches neither the results from a nbsRoadmCommonStagingQuickCfg of std100Ghz(4) or std50Ghz(5), then this object will report customized(3)." ::= { nbsRoadmCommonEntry 30 } nbsRoadmCommonCommittedChannels OBJECT-TYPE SYNTAX INTEGER (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of channels for this wdm port in the nbsRoadmCommittedTable." ::= { nbsRoadmCommonEntry 40 } -- ******************************************************************* -- -- the nbsRoadmFlexgridGrp -- -- ******************************************************************* nbsRoadmFlexgridTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in nbsRoadmFlexgridTable." ::= { nbsRoadmFlexgridGrp 1 } nbsRoadmFlexgridTable OBJECT-TYPE SYNTAX SEQUENCE OF NbsRoadmFlexgridEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Flexgrid channel creation parameters" ::= { nbsRoadmFlexgridGrp 2 } NbsRoadmFlexgridEntry ::= SEQUENCE { nbsRoadmFlexgridIfIndex InterfaceIndex, nbsRoadmFlexgridCenterlineMin NbsTcMHz, nbsRoadmFlexgridCenterlineMax NbsTcMHz, nbsRoadmFlexgridCenterlineIncr NbsTcMHz, nbsRoadmFlexgridBandwidthMin NbsTcMHz, nbsRoadmFlexgridBandwidthMax NbsTcMHz, nbsRoadmFlexgridBandwidthIncr NbsTcMHz } nbsRoadmFlexgridEntry OBJECT-TYPE SYNTAX NbsRoadmFlexgridEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { nbsRoadmFlexgridIfIndex } ::= { nbsRoadmFlexgridTable 1 } nbsRoadmFlexgridIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of the Common port." ::= { nbsRoadmFlexgridEntry 1 } nbsRoadmFlexgridCenterlineMin OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency of the lowest centerline possible." DEFVAL { 190100000 } ::= { nbsRoadmFlexgridEntry 21 } nbsRoadmFlexgridCenterlineMax OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency of the highest centerline possible." DEFVAL { 197250000 } ::= { nbsRoadmFlexgridEntry 22 } nbsRoadmFlexgridCenterlineIncr OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "Centerline increment - the minimum possible difference, in MHz, between adjacent channels' centerlines." DEFVAL { 12500 } ::= { nbsRoadmFlexgridEntry 23 } nbsRoadmFlexgridBandwidthMin OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum bandwidth possible. Each channel must be at least this wide." DEFVAL { 25000 } ::= { nbsRoadmFlexgridEntry 31 } nbsRoadmFlexgridBandwidthMax OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum bandwidth possible. Each channel must be at most this wide." DEFVAL { 25000 } ::= { nbsRoadmFlexgridEntry 32 } nbsRoadmFlexgridBandwidthIncr OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The granularity of bandwidths possible. Each channel's bandwidth must be a multiple of this number." DEFVAL { 25000 } ::= { nbsRoadmFlexgridEntry 33 } -- ******************************************************************* -- -- the nbsRoadmStagingGrp -- -- ******************************************************************* nbsRoadmStagingTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in nbsRoadmStagingTable" ::= { nbsRoadmStagingGrp 1 } nbsRoadmStagingTable OBJECT-TYPE SYNTAX SEQUENCE OF NbsRoadmStagingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Scratchpad where users can specify a new WSS configuration. Changes to this table have no effect on the system until they are committed using nbsRoadmCommonStagingApply." ::= { nbsRoadmStagingGrp 2 } nbsRoadmStagingEntry OBJECT-TYPE SYNTAX NbsRoadmStagingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { nbsRoadmStagingIfIndex, nbsRoadmStagingCenterline } ::= { nbsRoadmStagingTable 1 } NbsRoadmStagingEntry ::= SEQUENCE { nbsRoadmStagingIfIndex InterfaceIndex, nbsRoadmStagingCenterline NbsTcMHz, nbsRoadmStagingBandwidth NbsTcMHz, nbsRoadmStagingChannelName DisplayString, nbsRoadmStagingAddPort InterfaceIndex, nbsRoadmStagingDropPort InterfaceIndex, nbsRoadmStagingSecondaryPort InterfaceIndex, nbsRoadmStagingSecondAttenu NbsTcMilliDb, nbsRoadmStagingAddAttenu NbsTcMilliDb, nbsRoadmStagingDropAttenu NbsTcMilliDb, nbsRoadmStagingItuName DisplayString, nbsRoadmStagingRowStatus RowStatus } nbsRoadmStagingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's Common port." ::= { nbsRoadmStagingEntry 1 } nbsRoadmStagingCenterline OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The center frequency of this channel, in MHz" ::= { nbsRoadmStagingEntry 2 } nbsRoadmStagingBandwidth OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of spectrum allocated for this channel, in MHz" DEFVAL { 100000 } ::= { nbsRoadmStagingEntry 10 } nbsRoadmStagingChannelName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "User-assigned name for this channel. The assigned name must be unique within this agent system." ::= { nbsRoadmStagingEntry 30 } nbsRoadmStagingAddPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's Add port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 blocks the channel on all Add ports. Not supported value : -1" ::= { nbsRoadmStagingEntry 41 } nbsRoadmStagingDropPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's Drop port. This channel will be blocked on all Drop ports except the port specified here. Setting this object to 0 blocks the channel on all Drop ports. Not supported value : -1" ::= { nbsRoadmStagingEntry 42 } nbsRoadmStagingSecondaryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's Secondary port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 removes the secondary." ::= { nbsRoadmStagingEntry 43 } nbsRoadmStagingSecondAttenu OBJECT-TYPE SYNTAX NbsTcMilliDb MAX-ACCESS read-create STATUS current DESCRIPTION "Attenuation actually being applied to the secondary port, in millidecibels (mdB)." DEFVAL { -1000000 } ::= { nbsRoadmStagingEntry 44 } nbsRoadmStagingAddAttenu OBJECT-TYPE SYNTAX NbsTcMilliDb MAX-ACCESS read-create STATUS current DESCRIPTION "Attenuation to be applied to Add channel, expressed in millidecibels (mdB). Default is the blocked value as defined in NbsTcMilliDb" DEFVAL { -1000000 } ::= { nbsRoadmStagingEntry 51 } nbsRoadmStagingDropAttenu OBJECT-TYPE SYNTAX NbsTcMilliDb MAX-ACCESS read-create STATUS current DESCRIPTION "Attenuation to be applied to Drop channel, expressed in millidecibels (mdB). Default is the blocked value as defined in NbsTcMilliDb" DEFVAL { -1000000 } ::= { nbsRoadmStagingEntry 52 } nbsRoadmStagingItuName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "If this channel's centerline and bandwidth match a channel specified in the ITU grid DWDM standard, the name of that ITU channel will be shown here. The naming convention for 100GHz channels will be the two digit ITU channel number. For 50GHz channels, the convention will be to specify either the C or H band, followed by the two digit ITU channel number. For user-defined channels that don't match an ITU channel, this object will report 'N/A'." ::= { nbsRoadmStagingEntry 53 } nbsRoadmStagingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete channels in staging area" DEFVAL { active } ::= { nbsRoadmStagingEntry 99 } -- ******************************************************************* -- -- the nbsRoadmCommittedGrp -- -- ******************************************************************* nbsRoadmCommittedTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in nbsRoadmCommittedTable" ::= { nbsRoadmCommittedGrp 1 } nbsRoadmCommittedTable OBJECT-TYPE SYNTAX SEQUENCE OF NbsRoadmCommittedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current wss configuration" ::= { nbsRoadmCommittedGrp 2 } nbsRoadmCommittedEntry OBJECT-TYPE SYNTAX NbsRoadmCommittedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { nbsRoadmCommittedIfIndex, nbsRoadmCommittedCenterline } ::= { nbsRoadmCommittedTable 1 } NbsRoadmCommittedEntry ::= SEQUENCE { nbsRoadmCommittedIfIndex InterfaceIndex, nbsRoadmCommittedCenterline NbsTcMHz, nbsRoadmCommittedBandwidth NbsTcMHz, nbsRoadmCommittedChannelName DisplayString, nbsRoadmCommittedAddPort InterfaceIndex, nbsRoadmCommittedDropPort InterfaceIndex, nbsRoadmCommittedSecondaryPort InterfaceIndex, nbsRoadmCommittedSecondAttenu NbsTcMilliDb, nbsRoadmCommittedAddAttenu NbsTcMilliDb, nbsRoadmCommittedDropAttenu NbsTcMilliDb, nbsRoadmCommittedItuName DisplayString } nbsRoadmCommittedIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of the channel's Common port." ::= { nbsRoadmCommittedEntry 1 } nbsRoadmCommittedCenterline OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The center frequency of this channel, in MHz" ::= { nbsRoadmCommittedEntry 2 } nbsRoadmCommittedBandwidth OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of spectrum allocated for this channel, in MHz" DEFVAL { 100000 } ::= { nbsRoadmCommittedEntry 10 } nbsRoadmCommittedChannelName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "User-assigned name for this channel. The assigned name must be unique within this agent system. This object is equivalent to nbsWdmChannelCustomName." ::= { nbsRoadmCommittedEntry 30 } nbsRoadmCommittedAddPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's Add port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 blocks the channel on all ports. Not supported value : -1" ::= { nbsRoadmCommittedEntry 41 } nbsRoadmCommittedDropPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's Drop port. This channel will be blocked on all Drop ports except the port specified here. Setting this object to 0 blocks the channel on all ports. Not supported value : -1" ::= { nbsRoadmCommittedEntry 42 } nbsRoadmCommittedSecondaryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of this channel's Secondary Add port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 removes the secondary." ::= { nbsRoadmCommittedEntry 43 } nbsRoadmCommittedSecondAttenu OBJECT-TYPE SYNTAX NbsTcMilliDb MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation actually being applied to the secondary port, in millidecibels (mdB)." ::= { nbsRoadmCommittedEntry 44 } nbsRoadmCommittedAddAttenu OBJECT-TYPE SYNTAX NbsTcMilliDb MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation actually being applied to Add channel, in millidecibels (mdB)." ::= { nbsRoadmCommittedEntry 51 } nbsRoadmCommittedDropAttenu OBJECT-TYPE SYNTAX NbsTcMilliDb MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation actually being applied to Drop channel, in millidecibels (mdB)." ::= { nbsRoadmCommittedEntry 52 } nbsRoadmCommittedItuName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "If this channel's centerline and bandwidth match a channel specified in the ITU grid DWDM standard, the name of that ITU channel will be shown here. The naming convention for 100GHz channels will be the two digit ITU channel number. For 50GHz channels, the convention will be to specify either the C or H band, followed by the two digit ITU channel number. For user-defined channels that don't match an ITU channel, this object will report 'N/A'." ::= { nbsRoadmCommittedEntry 60 } -- ******************************************************************* -- -- the nbsRoadmRedundantGrp -- -- ******************************************************************* nbsRoadmRedundantTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in nbsRoadmRedundantTable" ::= { nbsRoadmRedundantGrp 1 } nbsRoadmRedundantTable OBJECT-TYPE SYNTAX SEQUENCE OF NbsRoadmRedundantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current wss redundancy configuration" ::= { nbsRoadmRedundantGrp 2 } nbsRoadmRedundantEntry OBJECT-TYPE SYNTAX NbsRoadmRedundantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { nbsRoadmRedundantIfIndex, nbsRoadmRedundantCenterline } ::= { nbsRoadmRedundantTable 1 } NbsRoadmRedundantEntry ::= SEQUENCE { nbsRoadmRedundantIfIndex InterfaceIndex, nbsRoadmRedundantCenterline NbsTcMHz, nbsRoadmRedundantItuName DisplayString, nbsRoadmRedundantChannelName DisplayString, nbsRoadmRedundantMapPort InterfaceIndex, nbsRoadmRedundantSecondaryPort InterfaceIndex, nbsRoadmRedundantCurPort InterfaceIndex, nbsRoadmRedundantCurAttenu NbsTcMilliDb, nbsRoadmRedundantCurState INTEGER } nbsRoadmRedundantIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of the channel's Common port." ::= { nbsRoadmRedundantEntry 1 } nbsRoadmRedundantCenterline OBJECT-TYPE SYNTAX NbsTcMHz MAX-ACCESS read-only STATUS current DESCRIPTION "The center frequency of this channel, in MHz" ::= { nbsRoadmRedundantEntry 2 } nbsRoadmRedundantItuName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "If this channel's centerline and bandwidth match a channel specified in the ITU grid DWDM standard, the name of that ITU channel will be shown here. The naming convention for 100GHz channels will be the two digit ITU channel number. For 50GHz channels, the convention will be to specify either the C or H band, followed by the two digit ITU channel number. For user-defined channels that don't match an ITU channel, this object will report 'N/A'." ::= { nbsRoadmRedundantEntry 10 } nbsRoadmRedundantChannelName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "User-assigned name for this channel. The assigned name must be unique within this agent system. This object is equivalent to nbsWdmChannelCustomName." ::= { nbsRoadmRedundantEntry 20 } nbsRoadmRedundantMapPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of the current channel's map port." ::= { nbsRoadmRedundantEntry 29 } nbsRoadmRedundantSecondaryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of the current channel's Secondary port." ::= { nbsRoadmRedundantEntry 30 } nbsRoadmRedundantCurPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Mib2 ifIndex of the current channel's Secondary port." ::= { nbsRoadmRedundantEntry 40 } nbsRoadmRedundantCurAttenu OBJECT-TYPE SYNTAX NbsTcMilliDb MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation actually being applied to the redundant channel, in millidecibels (mdB)." ::= { nbsRoadmRedundantEntry 41 } nbsRoadmRedundantCurState OBJECT-TYPE SYNTAX INTEGER { switching (1), active (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the current redundant port." ::= { nbsRoadmRedundantEntry 50 } -- ******************************************************************* -- -- the nbsRoadmEvent group -- -- ******************************************************************* nbsRoadmEventStageAreaCommitted NOTIFICATION-TYPE OBJECTS { nbsRoadmCommonIfIndex, ifAlias, nbsRoadmCommonCommittedGridType, nbsRoadmCommonCommittedChannels } STATUS current DESCRIPTION "Sent after an nbsRoadmCommonStagingCommit request is fulfilled. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3)." ::= { nbsRoadmEvent 10 } nbsRoadmEventRedundancyTriggered NOTIFICATION-TYPE OBJECTS { nbsRoadmRedundantIfIndex, nbsRoadmRedundantCenterline } STATUS current DESCRIPTION "Sent after an channel redundancy takes effect. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3)." ::= { nbsRoadmEvent 20 } END