ALCATEL-IND1-AAA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB softentIND1AAA, alaAaaTraps FROM ALCATEL-IND1-BASE; alcatelIND1AAAMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Authentication, Authorization, and Accounting (AAA) Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { softentIND1AAA 1 } alcatelIND1AAAMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Managed Objects." ::= { alcatelIND1AAAMIB 1 } alcatelIND1AAAMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Conformance Information." ::= { alcatelIND1AAAMIB 2 } alcatelIND1AAAMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Units Of Conformance." ::= { alcatelIND1AAAMIBConformance 1 } alcatelIND1AAAMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Compliance Statements." ::= { alcatelIND1AAAMIBConformance 2 } -- Overview of the AAA MIB -- -- this MIB provides configuration of the AAA services including the -- servers and the local user database -- -- AAA server MIB aaaServerMIB OBJECT IDENTIFIER ::= { alcatelIND1AAAMIBObjects 1 } -- -- Server configuration table -- aaaServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for each AAA server." ::= { aaaServerMIB 1 } aaaServerEntry OBJECT-TYPE SYNTAX AaaServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An AAA server configuration identified by its protocol and its index. An entry is created/removed when a server is defined or undefined with IOS configuration commands via CLI or by issuing appropriate sets to this table using snmp." INDEX { aaasName } ::= { aaaServerTable 1 } AaaServerEntry ::= SEQUENCE { aaasName DisplayString, aaasProtocol INTEGER, aaasHostName DisplayString, aaasIpAddress IpAddress, aaasHostName2 DisplayString, aaasIpAddress2 IpAddress, aaasRetries INTEGER, aaasTimout INTEGER, aaasRadKey DisplayString, aaasRadAuthPort INTEGER, aaasRadAcctPort INTEGER, aaasLdapPort INTEGER, aaasLdapDn DisplayString, aaasLdapPasswd DisplayString, aaasLdapSearchBase DisplayString, aaasLdapServType INTEGER, aaasLdapEnableSsl INTEGER, aaasAceClear INTEGER, aaasRowStatus RowStatus, aaasTacacsKey DisplayString, aaasTacacsPort INTEGER, aaasHttpPort INTEGER, aaasHttpDirectory DisplayString, aaasHttpProxyHostName DisplayString, aaasHttpProxyIpAddress IpAddress, aaasHttpProxyPort INTEGER, aaasVrfName DisplayString } aaasName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. This name is given by the operator to refer the server." ::= { aaaServerEntry 1} aaasProtocol OBJECT-TYPE SYNTAX INTEGER { radius(1), ldap(2), ace(3), tacacs(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol used with the server: radius(1) - RADIUS ldap(2) - LDAP ace(3) - ACE tacacs(4) - TACACS+" ::= { aaaServerEntry 2} aaasHostName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "DNS name of the server host." ::= { aaaServerEntry 3} aaasIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the server host." ::= { aaaServerEntry 4} aaasHostName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "DNS name of the backup server host." ::= { aaaServerEntry 5} aaasIpAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the backup server host." ::= { aaaServerEntry 6} aaasRetries OBJECT-TYPE SYNTAX INTEGER ( 0 .. 32 ) MAX-ACCESS read-create STATUS current DESCRIPTION " Number of retries the switch makes to the server to authenticate a user before trying the next backup server. The default value is 3." DEFVAL { 3 } ::= { aaaServerEntry 7} aaasTimout OBJECT-TYPE SYNTAX INTEGER ( 0 .. 512 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Time-out for server replies to authentication requests. The default value is 2." DEFVAL { 2 } ::= { aaaServerEntry 8} aaasRadKey OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The shared secret is a string of characters known to the switch and to the RADIUS server, but it is not sent out over the network. The secret can be any text string and must be configured here as well as on the server. The secret is stored encrypted using a two way algorithm." ::= { aaaServerEntry 9} aaasRadAuthPort OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For RADIUS server only. Port number for authentication request; the host is not used for authentication if set to 0. The default value is 1645." DEFVAL { 1645 } ::= { aaaServerEntry 10} aaasRadAcctPort OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For RADIUS server only. Port number for accounting request; the host is not used for authentication if set to 0. The default value is 1646." DEFVAL { 1646 } ::= { aaaServerEntry 11} aaasLdapPort OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For LDAP server only. Port number for LDAP server host." DEFVAL { 0 } ::= { aaaServerEntry 12} aaasLdapDn OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 255 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "For LDAP server only. the super user dn, i.e., the administrative distinguished name recognized by the LDAP-enabled directory servers (e.g., cn=manager)" ::= { aaaServerEntry 13} aaasLdapPasswd OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "For LDAP server only. the super user password, i.e., the administrative password recognized by LDAP-enabled directory servers (e.g., secret). The secret is stored encrypted using a two way algorithm." ::= { aaaServerEntry 14} aaasLdapSearchBase OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "For LDAP server only. Search base recognized by LDAP-enabled directory servers (e.g.,o=company, c=US)." ::= { aaaServerEntry 15} aaasLdapServType OBJECT-TYPE SYNTAX INTEGER { ns(0), generic(1), netscape(2), novell(3), sun(4), microsoft(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "For LDAP server only. Directory server type used in LDAP Authentication: ns(0) - non significant value generic(1) - Generic Schema netscape(2) - Netscape Directory Server novell(3) - Novell NDS sun(4) - Sun Directory Services microsoft(5) - Microsoft Active Directory" DEFVAL { netscape } ::= { aaaServerEntry 16} aaasLdapEnableSsl OBJECT-TYPE SYNTAX INTEGER { ns(0), true(1), false(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Only for LDAP server. Specify if the connection between the swtich and the LDAP server use a SSL session." DEFVAL { false } ::= { aaaServerEntry 17} aaasAceClear OBJECT-TYPE SYNTAX INTEGER { ns(0), true(1), false(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Only for ACE server. The ACE/Server generates a secrets that it sends to clients for authentication. While you cannot configure the secret on the switch, you can clear it. To clear the current ACE/Server secret, set this OID. After clearing the secret on the switch, you must also clear the secret from the ACE server." DEFVAL { false } ::= { aaaServerEntry 18} aaasRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaServerEntry 19} aaasTacacsKey OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The shared secret is a string of characters known to the switch and to the TACACS+ server, but it is not sent out over the network. The secret can be any text string and must be configured here as well as on the server. The secret is stored encrypted using a two way algorithm." ::= { aaaServerEntry 20} aaasTacacsPort OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For TACACS+ server only. Port number for LDAP server host." DEFVAL { 49 } ::= { aaaServerEntry 21} aaasHttpPort OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For HTTP server only. Port number for LDAP server host." ::= { aaaServerEntry 22} aaasHttpDirectory OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "For HTTP server only. A combination of directory tree and filename where the CRL can be found." ::= { aaaServerEntry 23} aaasHttpProxyHostName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "For HTTP server only. DNS name of the proxy server." ::= { aaaServerEntry 24} aaasHttpProxyIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "For HTTP server only. IP address of the proxy server." ::= { aaaServerEntry 25} aaasHttpProxyPort OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For HTTP server only. Port number for HTTP proxy server." ::= { aaaServerEntry 26} aaasVrfName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the VRF that the server is on. This VRF name is valid only when the server type is RADIUS. (aaasProtocol = 1 (Radius)." ::= { aaaServerEntry 27} -- AAA authentication accounting MIB aaaAuthAcctMIB OBJECT IDENTIFIER ::= { alcatelIND1AAAMIBObjects 2 } -- -- Authenticated Vlan configuration table -- aaaAuthVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAuthVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allow to display and modify the configuration of the authentication servers for the authenticated vlans." ::= { aaaAuthAcctMIB 1 } aaaAuthVlanEntry OBJECT-TYPE SYNTAX AaaAuthVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There can be one or several entries in this table. In case of single authority, all vlan are authenticated by the same set of servers, the aaatvVlan index is then equal to 0. In case of multiple authorities, each authenticated vlan has its own list of servers." INDEX { aaatvVlan } ::= { aaaAuthVlanTable 1 } AaaAuthVlanEntry ::= SEQUENCE { aaatvVlan INTEGER, aaatvName1 DisplayString, aaatvName2 DisplayString, aaatvName3 DisplayString, aaatvName4 DisplayString, aaatvRowStatus RowStatus, aaatvCertificate INTEGER } aaatvVlan OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "It indicate the vlan number authenticated by the servers. The value (0) means that all vlan are authenticated by the same servers (single mode configuration)." ::= { aaaAuthVlanEntry 1} aaatvName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand." ::= { aaaAuthVlanEntry 2} aaatvName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand." DEFVAL { "" } ::= { aaaAuthVlanEntry 3} aaatvName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand." DEFVAL { "" } ::= { aaaAuthVlanEntry 4} aaatvName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand." DEFVAL { "" } ::= { aaaAuthVlanEntry 5} aaatvRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAuthVlanEntry 6} aaatvCertificate OBJECT-TYPE SYNTAX INTEGER { noCertificate(0), certificateOnly(1), certificateWithPassword(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "use of x509 user certificate during the HTTPs session establisment. noCertificate(0)- no user certificate is required, certificateOnly(1) - the DN from the certifiicate is used to access to the authorization data of the user certificateWithPassword(2) - the user must execute a log-in procedure with user name and password after his certificate validation" DEFVAL { noCertificate } ::= { aaaAuthVlanEntry 7} -- -- Authenticated switch access configuration table -- aaaAuthSATable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAuthSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allow to display and modify the configuration of the authentication servers for the switch accesses." ::= { aaaAuthAcctMIB 2 } aaaAuthSAEntry OBJECT-TYPE SYNTAX AaaAuthSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A switch access authentication entry is specified by the type of access." INDEX { aaatsInterface} ::= { aaaAuthSATable 1 } AaaAuthSAEntry ::= SEQUENCE { aaatsInterface INTEGER, aaatsName1 DisplayString, aaatsName2 DisplayString, aaatsName3 DisplayString, aaatsName4 DisplayString, aaatsRowStatus RowStatus, aaatsCertificate INTEGER } aaatsInterface OBJECT-TYPE SYNTAX INTEGER { default(1), console(2), telnet(3), ftp(4), http(5), snmp(6), ssh(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of connection that must be authenticated default(1) -define the default authentication method for console, telnet, ftp, snmp , http and ssh. If the operator interface is not especially configured the default value is applied to this interface." ::= { aaaAuthSAEntry 1} aaatsName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database." ::= { aaaAuthSAEntry 2} aaatsName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database." DEFVAL { "" } ::= { aaaAuthSAEntry 3} aaatsName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database." DEFVAL { "" } ::= { aaaAuthSAEntry 4} aaatsName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database." DEFVAL { "" } ::= { aaaAuthSAEntry 5} aaatsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAuthSAEntry 7} aaatsCertificate OBJECT-TYPE SYNTAX INTEGER { noCertificate(0), certificateOnly(1), certificateWithPassword(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "use of x509 user certificate during the HTTPs session establisment. noCertificate(0)- no user certificate is required, certificateOnly(1) - the DN from the certifiicate is used to access to the authorization data of the user certificateWithPassword(2) - the user must execute a log-in procedure with user name and password after his certificate validation" DEFVAL { noCertificate } ::= { aaaAuthSAEntry 8} -- -- Accounting configuration table for vlan -- aaaAcctVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAcctVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows to display and configure the accounting servers for authenticated Vlans." ::= { aaaAuthAcctMIB 3 } aaaAcctVlanEntry OBJECT-TYPE SYNTAX AaaAcctVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There can be one or several entries in this table. In case of single authority, accounting information for all vlans are sent to the same set of servers, the aaatVlan index is then equal to 0. In case of multiple authorities, each authenticated vlan has its own list of servers." INDEX { aaacvVlan } ::= { aaaAcctVlanTable 1 } AaaAcctVlanEntry ::= SEQUENCE { aaacvVlan INTEGER, aaacvName1 DisplayString, aaacvName2 DisplayString, aaacvName3 DisplayString, aaacvName4 DisplayString, aaacvRowStatus RowStatus } aaacvVlan OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Current vlan number. The value (0) for avlan interface means that all authenticated vlans use the same servers for authentication." ::= { aaaAcctVlanEntry 1} aaacvName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." ::= { aaaAcctVlanEntry 2} aaacvName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." DEFVAL { "" } ::= { aaaAcctVlanEntry 3} aaacvName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." DEFVAL { "" } ::= { aaaAcctVlanEntry 4} aaacvName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." DEFVAL { "" } ::= { aaaAcctVlanEntry 5} aaacvRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAcctVlanEntry 6} -- -- Accounting configuration table for switch accesses -- aaaAcctSATable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAcctSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for Switch access accounting." ::= { aaaAuthAcctMIB 4 } aaaAcctSAEntry OBJECT-TYPE SYNTAX AaaAcctSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accounting configuration for switch access." INDEX { aaacsInterface } ::= { aaaAcctSATable 1 } AaaAcctSAEntry ::= SEQUENCE { aaacsInterface INTEGER, aaacsName1 DisplayString, aaacsName2 DisplayString, aaacsName3 DisplayString, aaacsName4 DisplayString, aaacsRowStatus RowStatus } aaacsInterface OBJECT-TYPE SYNTAX INTEGER ( 1 .. 1 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1)." DEFVAL { 1 } ::= { aaaAcctSAEntry 1} aaacsName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." ::= { aaaAcctSAEntry 2} aaacsName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." DEFVAL { "" } ::= { aaaAcctSAEntry 3} aaacsName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." DEFVAL { "" } ::= { aaaAcctSAEntry 4} aaacsName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting." DEFVAL { "" } ::= { aaaAcctSAEntry 5} aaacsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAcctSAEntry 6} -- -- Authenticated 802.1x configuration table -- aaaAuth8021xTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAuth8021xEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for 802.1X authentication." ::= { aaaAuthAcctMIB 5 } aaaAuth8021xEntry OBJECT-TYPE SYNTAX AaaAuth8021xEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "configuration for 802.1X authentication." INDEX { aaatxInterface } ::= { aaaAuth8021xTable 1 } AaaAuth8021xEntry ::= SEQUENCE { aaatxInterface INTEGER, aaatxName1 DisplayString, aaatxName2 DisplayString, aaatxName3 DisplayString, aaatxName4 DisplayString, aaatxOpen INTEGER, aaatxRowStatus RowStatus } aaatxInterface OBJECT-TYPE SYNTAX INTEGER ( 1 .. 1 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For now, the index is always (1)." DEFVAL { 1 } ::= { aaaAuth8021xEntry 1} aaatxName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." ::= { aaaAuth8021xEntry 2} aaatxName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAuth8021xEntry 3} aaatxName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAuth8021xEntry 4} aaatxName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAuth8021xEntry 5} aaatxOpen OBJECT-TYPE SYNTAX INTEGER { global(1), unique(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of port openning after authentication. If open-global(1) the port treats packet with unknown MAC addresses like an un-authenticated port. If open-unique(2), the port drops incomming packet with unknown MAC addresses." DEFVAL { unique} ::= { aaaAuth8021xEntry 6} aaatxRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAuth8021xEntry 7} -- -- Accounting configuration table for 802.1x -- aaaAcct8021xTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAcct8021xEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for 802.1X accounting." ::= { aaaAuthAcctMIB 6 } aaaAcct8021xEntry OBJECT-TYPE SYNTAX AaaAcct8021xEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for 802.1X accounting." INDEX { aaacxInterface } ::= { aaaAcct8021xTable 1 } AaaAcct8021xEntry ::= SEQUENCE { aaacxInterface INTEGER, aaacxName1 DisplayString, aaacxName2 DisplayString, aaacxName3 DisplayString, aaacxName4 DisplayString, aaacxRowStatus RowStatus } aaacxInterface OBJECT-TYPE SYNTAX INTEGER ( 1 .. 1 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For now, the index is always (1)." DEFVAL { 1 } ::= { aaaAcct8021xEntry 1} aaacxName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." ::= { aaaAcct8021xEntry 2} aaacxName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAcct8021xEntry 3} aaacxName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAcct8021xEntry 4} aaacxName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAcct8021xEntry 5} aaacxRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAcct8021xEntry 6} -- -- PKI agent configuration -- aaaPkiTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaPkiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for PKI." ::= { aaaAuthAcctMIB 7 } aaaPkiEntry OBJECT-TYPE SYNTAX AaaPkiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for PKI." INDEX { aaatpInterface } ::= { aaaPkiTable 1 } AaaPkiEntry ::= SEQUENCE { aaatpInterface INTEGER, aaatpName1 DisplayString, aaatpName2 DisplayString, aaatpName3 DisplayString, aaatpName4 DisplayString, aaatpLevel INTEGER, aaatpRowStatus RowStatus } aaatpInterface OBJECT-TYPE SYNTAX INTEGER ( 1 .. 1 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For now, the index is always (1)." DEFVAL { 1 } ::= { aaaPkiEntry 1} aaatpName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable" ::= { aaaPkiEntry 2} aaatpName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable" DEFVAL { "" } ::= { aaaPkiEntry 3} aaatpName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable" DEFVAL { "" } ::= { aaaPkiEntry 4} aaatpName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable" DEFVAL { "" } ::= { aaaPkiEntry 5} aaatpLevel OBJECT-TYPE SYNTAX INTEGER { certificate(1), notRevoked(2), repository(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "level of control to do on the user certificate. certificate means that there is a valid chain of certificate between the user certificate and a root certificate known by the switch. The root certificates are managed using specific pki commands. All certificates are valid and well signed. not-revoked means that using CRL or other ways configuring using pki commands the non-revocation of the certificate is checked. repository means that after the precedent control, there is a binary comparison of the certificate on the server and the one received during the authorization (instantaneous revocation possible) This verification is only possible when the access handler is configured with certificateOnly" DEFVAL { certificate } ::= { aaaPkiEntry 6} aaatpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaPkiEntry 7} -- -- Servers used for MAC based authentication -- aaaAuthMACTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAuthMACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for non-suplicant ( MAC based ) authentication." ::= { aaaAuthAcctMIB 8 } aaaAuthMACEntry OBJECT-TYPE SYNTAX AaaAuthMACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "configuration for MAC based authentication." INDEX { aaatxInterface } ::= { aaaAuthMACTable 1 } AaaAuthMACEntry ::= SEQUENCE { aaaMacInterface INTEGER, aaaMacSrvrName1 DisplayString, aaaMacSrvrName2 DisplayString, aaaMacSrvrName3 DisplayString, aaaMacSrvrName4 DisplayString, aaaMacSrvrRowStatus RowStatus } aaaMacInterface OBJECT-TYPE SYNTAX INTEGER ( 1 .. 1 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For now, the index is always (1)." DEFVAL { 1 } ::= { aaaAuthMACEntry 1} aaaMacSrvrName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." ::= { aaaAuthMACEntry 2} aaaMacSrvrName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAuthMACEntry 3} aaaMacSrvrName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAuthMACEntry 4} aaaMacSrvrName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand." DEFVAL { "" } ::= { aaaAuthMACEntry 5} aaaMacSrvrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAuthMACEntry 6} -- -- Accounting configuration table for commands -- aaaAcctCmdTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAcctCmdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the commands that will be logged during an accounting session. This feature is valid only for Tacacs+ accounting" ::= { aaaAuthAcctMIB 9 } aaaAcctCmdEntry OBJECT-TYPE SYNTAX AaaAcctCmdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tacacs+ Accounting configuration for executed commands." INDEX { aaacmdInterface } ::= { aaaAcctCmdTable 1 } AaaAcctCmdEntry ::= SEQUENCE { aaacmdInterface INTEGER, aaacmdSrvName1 DisplayString, aaacmdSrvName2 DisplayString, aaacmdSrvName3 DisplayString, aaacmdSrvName4 DisplayString, aaacmdRowStatus RowStatus } aaacmdInterface OBJECT-TYPE SYNTAX INTEGER ( 1 .. 1 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1)." DEFVAL { 1 } ::= { aaaAcctCmdEntry 1} aaacmdSrvName1 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Tacacs+ server. Other name correspond to an index value of the aaaServerTable" ::= { aaaAcctCmdEntry 2} aaacmdSrvName2 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable" DEFVAL { "" } ::= { aaaAcctCmdEntry 3} aaacmdSrvName3 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable" DEFVAL { "" } ::= { aaaAcctCmdEntry 4} aaacmdSrvName4 OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable" DEFVAL { "" } ::= { aaaAcctCmdEntry 5} aaacmdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaAcctCmdEntry 6} -- -- user local database configuration table -- aaaUserMIB OBJECT IDENTIFIER ::= { alcatelIND1AAAMIBObjects 3 } aaaUserTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for the local user database." ::= { aaaUserMIB 1 } aaaUserEntry OBJECT-TYPE SYNTAX AaaUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An user configuration identified by its user name." INDEX { aaauUserName } ::= { aaaUserTable 1 } AaaUserEntry ::= SEQUENCE { aaauUserName DisplayString, aaauPassword DisplayString, aaauReadRight1 Unsigned32, aaauReadRight2 Unsigned32, aaauWriteRight1 Unsigned32, aaauWriteRight2 Unsigned32, aaauProfile INTEGER, aaauSnmpLevel INTEGER, aaauSnmpAuthKey OCTET STRING, aaauRowStatus RowStatus, aaauOldPassword DisplayString, aaauEndUserProfile DisplayString, aaauPasswordExpirationDate DisplayString, aaauPasswordExpirationInMinute INTEGER, aaauPasswordAllowModifyDate DisplayString, aaauPasswordLockoutEnable INTEGER, aaauBadAtempts INTEGER } aaauUserName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 63 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the user." ::= { aaaUserEntry 1} aaauPassword OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 47 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Password of the user. For get response the password in encoded in a one way method. This makes the password readable by noone." ::= { aaaUserEntry 2} aaauReadRight1 OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 4294967295 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.First part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken" ::= { aaaUserEntry 3} aaauReadRight2 OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 4294967295 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.Second part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken" ::= { aaaUserEntry 4} aaauWriteRight1 OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 4294967295 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family. First part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken" ::= { aaaUserEntry 5} aaauWriteRight2 OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 4294967295 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family. Second part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken" ::= { aaaUserEntry 6} aaauProfile OBJECT-TYPE SYNTAX INTEGER ( 0 .. 2147483647 ) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Specifies the profile number. A profile number in the user account database represents the geographic privilege. This number points to an entry in the table of the user profiles." DEFVAL { 0 } ::= { aaaUserEntry 7} aaauSnmpLevel OBJECT-TYPE SYNTAX INTEGER { no(1), noauth(2), sha(3), md5(4), shaDes(5), md5Des(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies if the user is authorized to use SNMP and if yes its security level. no(1) - Not authorized to use SNMP. noauth(2) - SNMPv1,SNMPv2c or SNMPv3 without authentication. sha(3) - SNMPv3 with SHA authentication and no encryption. md5(4) - SNMPv3 with MD5 authentication and no encryption. sha-des(5) - SNMPv3 with SHA authentication and encryption. md5-des(6) - SNMPv3 with MD5 authentication and encryption. If the value is not specified, the value configured for the 'default' user is taken" ::= { aaaUserEntry 8} aaauSnmpAuthKey OBJECT-TYPE SYNTAX OCTET STRING ( SIZE( 0 .. 255 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication key of the user. The key is encoded in a two way method. The encryption key is deducted from this key." ::= { aaaUserEntry 9} aaauRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." DEFVAL { notInService } ::= { aaaUserEntry 10} aaauOldPassword OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 47 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Internal use" ::= { aaaUserEntry 11} aaauEndUserProfile OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the END user profile name." ::= { aaaUserEntry 12} aaauPasswordExpirationDate OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 16 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The local time of when the password would be expired. This date will be reset once the value of aaaAsaDefaultPasswordExpirationInDays is updated. Only the following format is valid: mm/dd/yyyy hh:mm where mm - month (1-12) dd - day (1-31) yyyy - year (2000-2050) hh - hour (1-24) mm - minute (1-59) Password will not be expired if set to empty string" ::= { aaaUserEntry 13} aaauPasswordExpirationInMinute OBJECT-TYPE SYNTAX INTEGER ( -1 .. 216000 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of minutes from now till the password expiration time. Setting this object will update aaauPasswordExpirationDate. If -1, password will not be expired. If 0, password has been expired." ::= { aaaUserEntry 14} aaauPasswordAllowModifyDate OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 16 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The local time of when the password can be start to be modified. This date will be reset once the value of aaauPasswordAllowModifyDate is updated. Only the following format is valid: mm/dd/yyyy hh:mm where mm - month (1-12) dd - day (1-31) yyyy - year (2000-2050) hh - hour (1-24) mm - minute (1-59) Password will not be expired if set to empty string" ::= { aaaUserEntry 15} aaauPasswordLockoutEnable OBJECT-TYPE SYNTAX INTEGER {lockout(1),unlock(2),expired(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate whether this account is locked out." DEFVAL { unlock } ::= { aaaUserEntry 16} aaauBadAtempts OBJECT-TYPE SYNTAX INTEGER ( 0 .. 999 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Number bad password attempts in the observation window." DEFVAL { 0 } ::= { aaaUserEntry 17} -- -- Authenticated users table -- aaaAuthenticatedUserTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAuthenticatedUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provide the list of users currently authenticated into the switch for bridging purpose." ::= { alcatelIND1AAAMIBObjects 4 } aaaAuthenticatedUserEntry OBJECT-TYPE SYNTAX AaaAuthenticatedUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the AaaAuthenticatedUserTable." INDEX {aaaaMacAddress} ::= { aaaAuthenticatedUserTable 1 } AaaAuthenticatedUserEntry ::= SEQUENCE { aaaaMacAddress MacAddress, aaaaUserName DisplayString, aaaaSlot INTEGER, aaaaPort INTEGER, aaaaVlan INTEGER, aaaaDrop INTEGER } aaaaMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac address of the user's device." ::= { aaaAuthenticatedUserEntry 1 } aaaaUserName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Login name of the user." ::= { aaaAuthenticatedUserEntry 2 } aaaaSlot OBJECT-TYPE SYNTAX INTEGER ( 0 .. 2147483647 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Slot number on which user is connected." ::= { aaaAuthenticatedUserEntry 3 } aaaaPort OBJECT-TYPE SYNTAX INTEGER ( 0 .. 2147483647 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Port number on which the user is connected." ::= { aaaAuthenticatedUserEntry 4 } aaaaVlan OBJECT-TYPE SYNTAX INTEGER ( 0 .. 65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan number on which the user is authenticated." ::= { aaaAuthenticatedUserEntry 5 } aaaaDrop OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow to remove a Mac address from a Vlan. The corresponding user is logged out of the network." DEFVAL { false } ::= { aaaAuthenticatedUserEntry 6 } -- Authenticated vlan specific configuration MIB aaaAvlanConfig OBJECT IDENTIFIER ::= { alcatelIND1AAAMIBObjects 5 } -- -- Authenticated vlan configuration group -- aaaAvlanDnsName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0 .. 255 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Dns name used to get the authentication Web page when authenticating using http." ::= { aaaAvlanConfig 1} aaaAvlanDhcpDefGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address that is used as the DHCP gateway address before the user get authenticated.It specifies the subnet into which a client receives its IP address prior to authentication" ::= { aaaAvlanConfig 2} aaaAvlanDefaultTraffic OBJECT-TYPE SYNTAX INTEGER { ns(0), true(1), false(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable the traffic in the default vlan prior to authentication if the value is true" ::= { aaaAvlanConfig 3} aaaAvlanPortBound OBJECT-TYPE SYNTAX INTEGER { ns(0), true(1), false(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Associate a MAC address to a specific Vlan on an authenticated port (printers, ...)" ::= { aaaAvlanConfig 4} aaaAvlanLanguage OBJECT-TYPE SYNTAX INTEGER { ns(0), true(1), false(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Force to read the language specific file for HTTP AVLAN (label.txt)" ::= { aaaAvlanConfig 5} -- ASA specific configuration MIB aaaAsaConfig OBJECT IDENTIFIER ::= { alcatelIND1AAAMIBObjects 6 } -- -- ASA configuration group -- aaaAsaPasswordSizeMin OBJECT-TYPE SYNTAX INTEGER ( 0 .. 14 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of digits of the passwords ( nominator aaauPassword)." DEFVAL { 0 } ::= { aaaAsaConfig 1} aaaAsaDefaultPasswordExpirationInDays OBJECT-TYPE SYNTAX INTEGER ( 0 .. 150 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Default password expiration time in days to be applied to all users. Updating this object will reset aaauPasswordExpirationDate. Password expiration will not be enforced if set to 0." DEFVAL { 0 } ::= { aaaAsaConfig 2} aaaAsaPasswordContainUserName OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate whether check password contains username or not." DEFVAL { disable } ::= { aaaAsaConfig 3} aaaAsaPasswordMinUpperCase OBJECT-TYPE SYNTAX INTEGER ( 0 .. 7 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of English uppercase characters required for password. 0 is disable" DEFVAL { 0 } ::= { aaaAsaConfig 4} aaaAsaPasswordMinLowerCase OBJECT-TYPE SYNTAX INTEGER ( 0 .. 7 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of English lowercase characters required for password 0 is disable." DEFVAL { 0 } ::= { aaaAsaConfig 5} aaaAsaPasswordMinDigit OBJECT-TYPE SYNTAX INTEGER ( 0 .. 7 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of base-10 digits required for password. 0 is disable" DEFVAL { 0 } ::= { aaaAsaConfig 6} aaaAsaPasswordMinNonAlphan OBJECT-TYPE SYNTAX INTEGER ( 0 .. 7 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of non-alphanumeric required for password. 0 is disable" DEFVAL { 0 } ::= { aaaAsaConfig 7} aaaAsaPasswordHistory OBJECT-TYPE SYNTAX INTEGER ( 0 .. 24 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Password history feature will prevent users from repeatedly using the same password. 0 is disable" DEFVAL { 4 } ::= { aaaAsaConfig 8} aaaAsaPasswordMinAge OBJECT-TYPE SYNTAX INTEGER ( 0 .. 150 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The password can't be modified in these days. 0 is disable" DEFVAL { 0 } ::= { aaaAsaConfig 9} aaaAsaLockoutWindow OBJECT-TYPE SYNTAX INTEGER ( 0 .. 99999 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The window of time in which the system increments the bad logon count.(minutes) 0 is disable" DEFVAL { 0 } ::= { aaaAsaConfig 10} aaaAsaLockoutDuration OBJECT-TYPE SYNTAX INTEGER ( 0 .. 99999 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time that an account is locked due to the aaauLockoutThreshold being exceeded.(minutes) 0 is disable" DEFVAL { 0 } ::= { aaaAsaConfig 11} aaaAsaLockoutThreshold OBJECT-TYPE SYNTAX INTEGER ( 0 .. 999 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of invalid logon attempts that are permitted before the account is locked out. 0 is disable" DEFVAL { 0 } ::= { aaaAsaConfig 12} aaaAsaROUserPingTrtEnable OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Global user config to allow/deny ping and traceroute cmds for read-only user. 0 - disable 1 - enable " DEFVAL { disable } ::= { aaaAsaConfig 13} aaaAsaAccessPolicyAdminConsoleOnly OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable AdminUser console only restriction" DEFVAL { disable } ::= { aaaAsaConfig 14} -- Authenticated IP address vlan specific configuration MIB aaaAvlanAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaAvlanAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan authenticated IP address Table" ::= { alcatelIND1AAAMIBObjects 7 } aaaAvlanAddressEntry OBJECT-TYPE SYNTAX AaaAvlanAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan authenticated IP address entry" INDEX {aaaAvlanId} ::= { aaaAvlanAddressTable 1 } AaaAvlanAddressEntry ::= SEQUENCE { aaaAvlanId INTEGER, aaaAvlanIpAddress IpAddress } aaaAvlanId OBJECT-TYPE SYNTAX INTEGER ( 1 .. 4094 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan Id corresponding to the authenticated IP address" ::= { aaaAvlanAddressEntry 1 } aaaAvlanIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Authenticated IP address for this vlan id" ::= { aaaAvlanAddressEntry 2} -- User Network Profile Table configuration MIB aaaUserNetProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaUserNetProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User Network Profile Table" ::= { alcatelIND1AAAMIBObjects 8 } aaaUserNetProfileEntry OBJECT-TYPE SYNTAX AaaUserNetProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User Network Profile entry" INDEX {aaaUserNetProfileName} ::= { aaaUserNetProfileTable 1 } AaaUserNetProfileEntry ::= SEQUENCE { aaaUserNetProfileName DisplayString, aaaUserNetProfileVlanID INTEGER, aaaUserNetProfileRowStatus RowStatus, aaaUserNetProfileHICflag INTEGER, aaaUserNetProfileQosPolicyListName DisplayString } aaaUserNetProfileName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 1 .. 32 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of this profile." ::= { aaaUserNetProfileEntry 1 } aaaUserNetProfileVlanID OBJECT-TYPE SYNTAX INTEGER (1 .. 4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN id for this profile." ::= { aaaUserNetProfileEntry 2} aaaUserNetProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { aaaUserNetProfileEntry 3} aaaUserNetProfileHICflag OBJECT-TYPE SYNTAX INTEGER (1 .. 2) MAX-ACCESS read-create STATUS current DESCRIPTION "The flag to indicate if HIC is enabled (1) or disabled (2)." ::= { aaaUserNetProfileEntry 4} aaaUserNetProfileQosPolicyListName OBJECT-TYPE SYNTAX DisplayString ( SIZE( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device along with aaaUserNetProfileVlanID." ::= { aaaUserNetProfileEntry 5 } -- Radius Agent IP Information aaaRadAgentConfig OBJECT-TYPE SYNTAX INTEGER (1 .. 3) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The Agent Config Information 1 -- Default(Loopback0 or closest IP) 2 -- Non Loopback0 3 -- Interface IP Specified by User This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib" DEFVAL { 1 } ::= { alcatelIND1AAAMIBObjects 9} aaaRadAgentIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The Agent IP Address in Radius Packets. This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib" ::= { alcatelIND1AAAMIBObjects 10} -- START: AAA HIC-Related MIB ------------------ aaaHicConfig OBJECT IDENTIFIER ::= { alcatelIND1AAAMIBObjects 11 } -- HIC Server Table MIB -- aaaHicSvrTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaHicSvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows current configuration for each HIC server." ::= { aaaHicConfig 1 } aaaHicSvrEntry OBJECT-TYPE SYNTAX AaaHicSvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A HIC server configuration." INDEX { aaaHicSvrName } ::= { aaaHicSvrTable 1 } AaaHicSvrEntry ::= SEQUENCE { aaaHicSvrName SnmpAdminString, aaaHicSvrIpAddr IpAddress, aaaHicSvrPort INTEGER, aaaHicSvrKey SnmpAdminString, aaaHicSvrRowStatus RowStatus, aaaHicSvrStatus INTEGER } aaaHicSvrName OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 1 .. 31 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the server. This name is given by the operator to refer the server." ::= { aaaHicSvrEntry 1} aaaHicSvrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the server host." ::= { aaaHicSvrEntry 2} aaaHicSvrPort OBJECT-TYPE SYNTAX INTEGER ( 1025 .. 65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "For HIC server only. Port number for HIC request" DEFVAL { 11707 } ::= { aaaHicSvrEntry 3} aaaHicSvrKey OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 1 .. 31 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The shared secret is a string of characters known to the switch and to the HIC server. It is used to compute the digest to preserve the integrity between the HIC server and the AoS Switch. The secret is stored encrypted using a two way algorithm." ::= { aaaHicSvrEntry 4} aaaHicSvrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { aaaHicSvrEntry 5} aaaHicSvrStatus OBJECT-TYPE SYNTAX INTEGER {down(1), up(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "HIC server status." DEFVAL { down } ::= { aaaHicSvrEntry 6} -- HIC Allowed/Exception IP Table MIB -- aaaHicAllowedTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaHicAllowedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of allowed/exception IP Addresses the the HIC hosts allowed to access during HIC. Those are the IP addresses of the Remediation/Patch servers, and the Web Agent Download server." ::= { aaaHicConfig 2 } aaaHicAllowedEntry OBJECT-TYPE SYNTAX AaaHicAllowedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Remediation server configuration." INDEX { aaaHicAllowedName } ::= { aaaHicAllowedTable 1 } AaaHicAllowedEntry ::= SEQUENCE { aaaHicAllowedName SnmpAdminString, aaaHicAllowedIpAddr IpAddress, aaaHicAllowedIpMask IpAddress, aaaHicAllowedRowStatus RowStatus } aaaHicAllowedName OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 1 .. 31 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the server. This name is given by the operator to refer the server." ::= { aaaHicAllowedEntry 1} aaaHicAllowedIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the allowed entry." ::= { aaaHicAllowedEntry 2} aaaHicAllowedIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Mask of the allowed entry." DEFVAL { 'ffffffff'h } ::= { aaaHicAllowedEntry 3} aaaHicAllowedRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { aaaHicAllowedEntry 4} -- HIC Override MAC Table MIB -- aaaHicOverrideTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaHicOverrideEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows list of MAC addresses that overrides the existing HIC status." ::= { aaaHicConfig 3 } aaaHicOverrideEntry OBJECT-TYPE SYNTAX AaaHicOverrideEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HIC MAC override list configuration." INDEX { aaaHicOverrideMac } ::= { aaaHicOverrideTable 1 } AaaHicOverrideEntry ::= SEQUENCE { aaaHicOverrideMac MacAddress, aaaHicOverrideStatus INTEGER, aaaHicOverrideRowStatus RowStatus } aaaHicOverrideMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static MAC address index to each override entry." ::= { aaaHicOverrideEntry 1} aaaHicOverrideStatus OBJECT-TYPE SYNTAX INTEGER {enforce(1),bypass(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Overriding status of each static MAC address." DEFVAL { enforce } ::= { aaaHicOverrideEntry 2} aaaHicOverrideRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { aaaHicOverrideEntry 3} -- HIC Host Table MIB -- aaaHicHostTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaHicHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows list of HIC Hosts and their active HIC status." ::= { aaaHicConfig 4 } aaaHicHostEntry OBJECT-TYPE SYNTAX AaaHicHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HIC Host status information." INDEX { aaaHicHostMac } ::= { aaaHicHostTable 1 } AaaHicHostEntry ::= SEQUENCE { aaaHicHostMac MacAddress, aaaHicHostStatus INTEGER } aaaHicHostMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static MAC address index to each override entry." ::= { aaaHicHostEntry 1} aaaHicHostStatus OBJECT-TYPE SYNTAX INTEGER {inprogress(1),success(2),fail(3),timeout(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "HIC status of each HIC Host." DEFVAL { fail } ::= { aaaHicHostEntry 2} -- Global HIC Configuration Information -- aaaHicConfigInfo OBJECT IDENTIFIER ::= { aaaHicConfig 5 } aaaHicStatus OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "HIC Status. The HIC server has to be configured before HIC can be enabled." DEFVAL { disable } ::= { aaaHicConfigInfo 1} aaaHicAllowed1Name OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 0 .. 31 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the rem server. This name is given by the operator to refer the remediation server." ::= { aaaHicConfigInfo 2} aaaHicAllowed2Name OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 0 .. 31 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the rem server. This name is given by the operator to refer the alternate remediation server." ::= { aaaHicConfigInfo 3} aaaHicAllowed3Name OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 0 .. 31 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the rem server. This name is given by the operator to refer the alternate remediation server." ::= { aaaHicConfigInfo 4} aaaHicAllowed4Name OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 0 .. 31 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the rem server. This name is given by the operator to refer the alternate remediation server." ::= { aaaHicConfigInfo 5 } aaaHicWebAgentDownloadUrl OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 0 .. 127 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The URL for web agent download." ::= { aaaHicConfigInfo 6} aaaHicCustomHttpProxyPort OBJECT-TYPE SYNTAX INTEGER ( 1025 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The custom HTTP port for QoS to intercept the host's initial HTTP request." DEFVAL { 8080 } ::= { aaaHicConfigInfo 7} -- END: AAA HIC-Related MIB ------------------ -- AAA Classification IP network address rule *** aaaUNPIpNetRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaUNPIpNetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IP network address rules. This is used to match the InetAddress of a packet to a User Network Profile entry." ::= { alcatelIND1AAAMIBObjects 12 } aaaUNPIpNetRuleEntry OBJECT-TYPE SYNTAX AaaUNPIpNetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP network address rule entry." INDEX { aaaUNPIpNetRuleAddrType, aaaUNPIpNetRuleAddr, aaaUNPIpNetRuleMask } ::= { aaaUNPIpNetRuleTable 1 } AaaUNPIpNetRuleEntry ::= SEQUENCE { aaaUNPIpNetRuleAddrType InetAddressType, aaaUNPIpNetRuleAddr InetAddress, aaaUNPIpNetRuleMask InetAddress, aaaUNPIpNetRuleProfileName SnmpAdminString, aaaUNPIpNetRuleRowStatus RowStatus } aaaUNPIpNetRuleAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP network address type used for VLAN classification. For now Only IPv4 is supported." ::= { aaaUNPIpNetRuleEntry 1 } aaaUNPIpNetRuleAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP network address used for VLAN classification. Only IPv4 is supported." ::= { aaaUNPIpNetRuleEntry 2 } aaaUNPIpNetRuleMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP network mask applying to the IP network address." ::= { aaaUNPIpNetRuleEntry 3 } aaaUNPIpNetRuleProfileName OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The profile name in the User Network Profile Table to be applied." ::= { aaaUNPIpNetRuleEntry 4 } aaaUNPIpNetRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { aaaUNPIpNetRuleEntry 5 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- AAA Classification MAC address rule *** aaaUNPMacRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaUNPMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MAC address rules. This is used to match the MAC Address of a packet to a User Network Profile entry " ::= { alcatelIND1AAAMIBObjects 13 } aaaUNPMacRuleEntry OBJECT-TYPE SYNTAX AaaUNPMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC rule entry." INDEX {aaaUNPMacRuleAddr } ::= { aaaUNPMacRuleTable 1 } AaaUNPMacRuleEntry ::= SEQUENCE { aaaUNPMacRuleAddr MacAddress, aaaUNPMacRuleProfileName SnmpAdminString, aaaUNPMacRuleRowStatus RowStatus } aaaUNPMacRuleAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address used for VLAN classification." ::= { aaaUNPMacRuleEntry 1 } aaaUNPMacRuleProfileName OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The profile name in the User Network Profile Table to be applied." ::= { aaaUNPMacRuleEntry 2 } aaaUNPMacRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { aaaUNPMacRuleEntry 3 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- AAA Classification MAC range rule *** aaaUNPMacRangeRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AaaUNPMacRangeRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MAC range rules. This is used to match the MAC Address Range of a packet to a User Network Profile entry." ::= { alcatelIND1AAAMIBObjects 14 } aaaUNPMacRangeRuleEntry OBJECT-TYPE SYNTAX AaaUNPMacRangeRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC range rule entry." INDEX {aaaUNPMacRangeRuleLoAddr } ::= { aaaUNPMacRangeRuleTable 1 } AaaUNPMacRangeRuleEntry ::= SEQUENCE { aaaUNPMacRangeRuleLoAddr MacAddress, aaaUNPMacRangeRuleHiAddr MacAddress, aaaUNPMacRangeRuleProfileName SnmpAdminString, aaaUNPMacRangeRuleRowStatus RowStatus } aaaUNPMacRangeRuleLoAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The lower bound of MAC address range used for VLAN classification." ::= { aaaUNPMacRangeRuleEntry 1 } aaaUNPMacRangeRuleHiAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The upper bound of MAC address range used for VLAN classification." ::= { aaaUNPMacRangeRuleEntry 2 } aaaUNPMacRangeRuleProfileName OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "The profile name in the User Network Profile Table to be applied." ::= { aaaUNPMacRangeRuleEntry 3 } aaaUNPMacRangeRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { aaaUNPMacRangeRuleEntry 4 } -- -- AAA-HIC Trap description -- alaAaaTrapsDesc OBJECT IDENTIFIER ::= { alaAaaTraps 1 } alaAaaTrapsDescRoot OBJECT IDENTIFIER ::= { alaAaaTrapsDesc 0 } alaAaaTrapsObj OBJECT IDENTIFIER ::= { alaAaaTraps 2 } aaaHicServerTrap NOTIFICATION-TYPE OBJECTS { aaaHSvrIpAddress } STATUS current DESCRIPTION "AAA HIC server down Trap is sent when the HIC server is down." ::= {alaAaaTrapsDescRoot 1 } -- -- Object used in the trap -- aaaHSvrIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "HIC/Rem/WebDL server's IP address." ::= { alaAaaTrapsObj 1 } -- -- Compliance Statements -- alcatelIND1AAAMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Authentication, Authorization, and Accounting (AAA) Subsystem." MODULE -- this module MANDATORY-GROUPS { aaaServerMIBGroup, aaaAuthAcctGroup, aaaUserMIBGroup } ::= { alcatelIND1AAAMIBCompliances 1 } -- -- Units Of Conformance -- aaaServerMIBGroup OBJECT-GROUP OBJECTS { aaasName, -- Server configuration table aaasProtocol, aaasHostName, aaasIpAddress, aaasHostName2, aaasIpAddress2, aaasRetries, aaasTimout, aaasRadKey, aaasRadAuthPort, aaasRadAcctPort, aaasLdapPort, aaasLdapDn, aaasLdapPasswd, aaasLdapSearchBase, aaasLdapServType, aaasLdapEnableSsl, aaasAceClear, aaasRowStatus, aaasTacacsKey, aaasTacacsPort, aaasHttpPort, aaasHttpDirectory, aaasHttpProxyHostName, aaasHttpProxyIpAddress, aaasHttpProxyPort, aaasVrfName } STATUS current DESCRIPTION "Collection of objects for management of AAA Server." ::= { alcatelIND1AAAMIBGroups 1 } aaaAuthAcctGroup OBJECT-GROUP OBJECTS { aaatvVlan, -- Authenticated Vlan configuration table aaatvName1, aaatvName2, aaatvName3, aaatvName4, aaatvRowStatus, aaatvCertificate, aaatsInterface, -- Authenticated switch access configuration table aaatsName1, aaatsName2, aaatsName3, aaatsName4, aaatsRowStatus, aaatsCertificate, aaacvVlan, -- Accounting configuration table for vlan aaacvName1, aaacvName2, aaacvName3, aaacvName4, aaacvRowStatus, aaacsInterface, -- Accounting configuration table for switch accesses aaacsName1, aaacsName2, aaacsName3, aaacsName4, aaacsRowStatus, aaatxInterface, -- Authentication configuration table for 802.1x aaatxName1, aaatxName2, aaatxName3, aaatxName4, aaatxOpen, aaatxRowStatus, aaacxInterface, -- Accounting configuration table for 802.1x aaacxName1, aaacxName2, aaacxName3, aaacxName4, aaacxRowStatus, aaatpInterface, -- PKI agent configuration aaatpName1, aaatpName2, aaatpName3, aaatpName4, aaatpLevel, aaatpRowStatus, aaacmdInterface, aaacmdSrvName1, aaacmdSrvName2, aaacmdSrvName3, aaacmdSrvName4, aaacmdRowStatus } STATUS current DESCRIPTION "Collection of objects for management of AAA Authentication Accounting." ::= { alcatelIND1AAAMIBGroups 2 } aaaUserMIBGroup OBJECT-GROUP OBJECTS { aaauUserName, -- User local database configuration table aaauPassword, aaauReadRight1, aaauReadRight2, aaauWriteRight1, aaauWriteRight2, aaauProfile, aaauSnmpLevel, aaauSnmpAuthKey, aaauRowStatus, aaauOldPassword, aaauEndUserProfile, aaauPasswordExpirationDate, aaauPasswordExpirationInMinute, aaauPasswordAllowModifyDate, aaauPasswordLockoutEnable , aaauBadAtempts, aaaAsaPasswordSizeMin, -- ASA specific configuration MIB aaaAsaDefaultPasswordExpirationInDays, aaaAsaPasswordContainUserName, aaaAsaPasswordMinUpperCase, aaaAsaPasswordMinLowerCase, aaaAsaPasswordMinDigit, aaaAsaPasswordMinNonAlphan, aaaAsaPasswordHistory, aaaAsaPasswordMinAge, aaaAsaLockoutWindow, aaaAsaLockoutDuration, aaaAsaLockoutThreshold, aaaAsaROUserPingTrtEnable, aaaAsaAccessPolicyAdminConsoleOnly } STATUS current DESCRIPTION "Collection of objects for management of AAA User Local Database." ::= { alcatelIND1AAAMIBGroups 3 } aaaHicGroup OBJECT-GROUP OBJECTS { -- HIC Server table aaaHicSvrIpAddr, aaaHicSvrPort, aaaHicSvrKey, aaaHicSvrRowStatus, aaaHicSvrStatus, -- Allowed/Exception IP Address table aaaHicAllowedIpAddr, aaaHicAllowedRowStatus, -- HIC Override table aaaHicOverrideStatus, aaaHicOverrideRowStatus, -- HIC Host status table aaaHicHostStatus, aaaHicStatus, -- Global HIC config data aaaHicAllowed1Name, aaaHicAllowed2Name, aaaHicAllowed3Name, aaaHicAllowed4Name, aaaHicWebAgentDownloadUrl, aaaHicCustomHttpProxyPort } STATUS current DESCRIPTION "Collection of objects for management of AAA HIC." ::= { alcatelIND1AAAMIBGroups 4 } aaaTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { aaaHicServerTrap } STATUS current DESCRIPTION "Collection of Traps for AAA HIC servers." ::= { alcatelIND1AAAMIBGroups 5 } END