ALCATEL-IND1-BGP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, IpAddress, Counter32, Gauge32, Unsigned32 FROM SNMPv2-SMI DisplayString,RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF Ipv6Address FROM IPV6-TC routingIND1Bgp FROM ALCATEL-IND1-BASE; alcatelIND1BGPMIB MODULE-IDENTITY LAST-UPDATED "200809140900Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Of Global BGP Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" ::= { routingIND1Bgp 1} alcatelIND1BGPMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Border Gateway Protocol (BGP) Subsystem Managed Objects." ::= { alcatelIND1BGPMIB 1 } alcatelIND1BGPMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Border Gateway Protocol (BGP) Subsystem Conformance Information." ::= { alcatelIND1BGPMIB 2 } alcatelIND1BGPMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Border Gateway Protocol (BGP) Subsystem Units Of Conformance." ::= { alcatelIND1BGPMIBConformance 1 } alcatelIND1BGPMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Border Gateway Protocol (BGP) Subsystem Compliance Statements." ::= { alcatelIND1BGPMIBConformance 2 } -- -- BGP Global configuration parameters -- alaBgpGlobal OBJECT IDENTIFIER ::= { alcatelIND1BGPMIBObjects 1 } alaBgpProtoStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable BGP protocol" DEFVAL { disable } ::= { alaBgpGlobal 1 } alaBgpAutonomousSystemNumber OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Autonomous System Number." DEFVAL { 1 } ::= { alaBgpGlobal 2 } alaBgpRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Configured BGP router ID." DEFVAL { '00000000'H } ::= { alaBgpGlobal 3 } alaBgpIgpSynchStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable BGP IGP Synchronization." DEFVAL { disable } ::= { alaBgpGlobal 4 } alaBgpMedAlways OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable BGP Metric MULTI_EXIT_DISC comparison between routes from different Autonomous Systems." DEFVAL { disable } ::= { alaBgpGlobal 5 } alaBgpDefaultLocalPref OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The default LOCAL_PREF to be applied to routes learnt from neighbouring autonomous system." DEFVAL { 100 } ::= { alaBgpGlobal 6 } alaBgpMissingMed OBJECT-TYPE SYNTAX INTEGER { worst(1), best(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how to a missing med in a path attribute." DEFVAL { worst } ::= { alaBgpGlobal 7 } alaBgpManualTag OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Manual tag to be used. A value of 0 means no manual tagging." DEFVAL { 0 } ::= { alaBgpGlobal 8 } alaBgpPromiscuousNeighbours OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Enable/Disable BGP to accept connections from neighbours that are not configured." DEFVAL { disable } ::= { alaBgpGlobal 9 } alaBgpConfedId OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Confederation identifier. A value of 0 means this local speaker is not a member of any confederation" DEFVAL { 0 } ::= { alaBgpGlobal 10 } alaBgpDampening OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable BGP route dampening" DEFVAL { disable } ::= { alaBgpGlobal 11 } alaBgpDampHalfLifeReach OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains reachable. Obsoleted by the variable alaBgpDampHalfLife." DEFVAL { 300 } ::= { alaBgpGlobal 12 } alaBgpDampHalfLifeUnReach OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains unreachable. Obsoleted by the variable alaBgpDampHalfLife." DEFVAL { 900 } ::= { alaBgpGlobal 13 } alaBgpDampMaxFlapHistory OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds the flap history of a route is retained." DEFVAL { 1800 } ::= { alaBgpGlobal 14 } alaBgpDebugLevel OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object has been deprecated in favour of alaDrcTmBgpDebug Configuration." DEFVAL { 0 } ::= { alaBgpGlobal 15 } alaBgpFastExternalFailOver OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Resetting session immediately if a link to a directly connected external peer is operationally down." DEFVAL { disable } ::= { alaBgpGlobal 16 } alaBgpPeerChanges OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable logging of peer state changes to the syslog." DEFVAL { disable } ::= { alaBgpGlobal 17 } alaBgpVersion OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Version in use." ::= { alaBgpGlobal 18 } alaBgpProtoOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP protocol operational state." ::= { alaBgpGlobal 19 } alaBgpMaxPeers OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum BGP peers supported." DEFVAL { 32 } ::= { alaBgpGlobal 20 } alaBgpNumActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active known routes in the BGP routing table" ::= { alaBgpGlobal 21 } alaBgpNumEstabExternalPeers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of External Peers that are in ESTABLISHED state." ::= { alaBgpGlobal 22 } alaBgpNumEstabInternalPeers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Internal Peers that are in ESTABLISHED state." ::= { alaBgpGlobal 23 } alaBgpNumPaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of paths known to the system." ::= { alaBgpGlobal 24 } alaBgpNumFeasiblePaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of feasible paths known to the system." ::= { alaBgpGlobal 25 } alaBgpNumDampenedPaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of dampened paths known to the system." ::= { alaBgpGlobal 26 } alaBgpNumIgpSyncWaitPaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of paths learnt from internal peers that are waiting to be synchronized with IGP." ::= { alaBgpGlobal 27 } alaBgpNumPolicyChgPaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of paths that are currently rejected but stored anticipating an inbound policy change for an external peer which is configured to accept dynamic policy changes." ::= { alaBgpGlobal 28 } alaBgpMultiPath OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Equal-Cost MultiPaths" DEFVAL { disable } ::= { alaBgpGlobal 29 } alaBgpRouteReflection OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Route reflection" DEFVAL { disable } ::= { alaBgpGlobal 30 } alaBgpClusterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The local cluster id of this route reflection cluster." DEFVAL { '00000000'H } ::= { alaBgpGlobal 31 } alaBgpDampeningClear OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Writing a value of clear into this variable will clear the dampening history." DEFVAL { clear } ::= { alaBgpGlobal 32 } alaBgpDampCutOff OBJECT-TYPE SYNTAX INTEGER ( 1 .. 9999 ) MAX-ACCESS read-write STATUS current DESCRIPTION "When a route's figure of merit reaches this value, the route is considered damped. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 ,a value of 9.45 is encoded as 945." DEFVAL { 300 } ::= { alaBgpGlobal 33 } alaBgpDampReuse OBJECT-TYPE SYNTAX INTEGER ( 1 .. 9999 ) MAX-ACCESS read-write STATUS current DESCRIPTION "When a route's figure of merit decays to this value, the route can be reused. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 , a value of 9.45 is encoded as 945." DEFVAL { 200 } ::= { alaBgpGlobal 34 } alaBgpDampCeil OBJECT-TYPE SYNTAX INTEGER ( 100 .. 9999 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value that the figure of merit of a route can attain. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945." DEFVAL { 1600 } ::= { alaBgpGlobal 35 } alaBgpAspathCompare OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether to include aspath comparison in route selection." DEFVAL { enable } ::= { alaBgpGlobal 36 } alaBgpAsOriginInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum interval in seconds between successive updates advertising the networks belonging to the local autonomous system." DEFVAL { 15 } ::= { alaBgpGlobal 37 } alaBgpDampHalfLife OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds in which the penalty to a flapping route decreases to half its initial value." DEFVAL { 300 } ::= { alaBgpGlobal 38 } alaBgpGracefulRestart OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables BGP graceful restart capability." DEFVAL { enable } ::= { alaBgpGlobal 39 } alaBgpRestartInterval OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines how long, in seconds, peering BGP routers are told to wait for this router to complete graceful restart and re-establish peering session. It is recommended that this value not be more than the configured Hold Time interval." DEFVAL { 90 } ::= { alaBgpGlobal 40 } alaBgpRestartStatus OBJECT-TYPE SYNTAX INTEGER { notRestarting(1), inProgress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the router is currently performing a graceful restart." ::= { alaBgpGlobal 41 } alaBgpMultiProtocolIpv4 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether IPv4 BGP4 capability is enabled." DEFVAL { enabled } ::= { alaBgpGlobal 42 } alaBgpMultiProtocolIpv6 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether IPv6 BGP4 capability is enabled." DEFVAL { disabled } ::= { alaBgpGlobal 43 } alaBgpBfdStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables BFd for BGP protocol." DEFVAL { disabled } ::= { alaBgpGlobal 44} alaBgpBfdAllNeighborStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables BFd for all BGP Neighbors." DEFVAL { disabled } ::= { alaBgpGlobal 45} --- --- BGP IPv4 Peer Table --- alaBgpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP IPv4 peer table." ::= { alcatelIND1BGPMIBObjects 2 } alaBgpPeerEntry OBJECT-TYPE SYNTAX AlaBgpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP IPv4 Peer configuration entry." INDEX { alaBgpPeerAddr } ::= { alaBgpPeerTable 1 } AlaBgpPeerEntry ::= SEQUENCE { alaBgpPeerAddr IpAddress, alaBgpPeerAS INTEGER, alaBgpPeerPassive INTEGER, alaBgpPeerName DisplayString, alaBgpPeerMultiHop INTEGER, alaBgpPeerMaxPrefix Gauge32, alaBgpPeerMaxPrefixWarnOnly INTEGER, alaBgpPeerNextHopSelf INTEGER, alaBgpPeerSoftReconfig INTEGER, alaBgpPeerInSoftReset INTEGER, alaBgpPeerIpv4Unicast INTEGER, alaBgpPeerIpv4Multicast INTEGER, alaBgpPeerRcvdRtRefreshMsgs Counter32, alaBgpPeerSentRtRefreshMsgs Counter32, alaBgpPeerRouteMapOut DisplayString, alaBgpPeerRouteMapIn DisplayString, alaBgpPeerLocalAddr IpAddress, alaBgpPeerLastDownReason INTEGER, alaBgpPeerLastDownTime TimeTicks, alaBgpPeerLastReadTime TimeTicks, alaBgpPeerRcvdNotifyMsgs Counter32, alaBgpPeerSentNotifyMsgs Counter32, alaBgpPeerLastSentNotifyReason INTEGER, alaBgpPeerLastRecvNotifyReason INTEGER, alaBgpPeerRcvdPrefixes Counter32, alaBgpPeerDownTransitions Counter32, alaBgpPeerType INTEGER, alaBgpPeerAutoReStart INTEGER, alaBgpPeerClientStatus INTEGER, alaBgpPeerConfedStatus INTEGER, alaBgpPeerRemovePrivateAs INTEGER, alaBgpPeerClearCounter INTEGER, alaBgpPeerTTL INTEGER, alaBgpPeerAspathListOut DisplayString, alaBgpPeerAspathListIn DisplayString, alaBgpPeerPrefixListOut DisplayString, alaBgpPeerPrefixListIn DisplayString, alaBgpPeerCommunityListOut DisplayString, alaBgpPeerCommunityListIn DisplayString, alaBgpPeerRestart INTEGER, alaBgpPeerDefaultOriginate INTEGER, alaBgpPeerReconfigureInBound INTEGER, alaBgpPeerReconfigureOutBound INTEGER, alaBgpPeerMD5Key DisplayString, alaBgpPeerMD5KeyEncrypt OCTET STRING, alaBgpPeerRowStatus RowStatus, alaBgpPeerUpTransitions Counter32, alaBgpPeerLastWriteTime TimeTicks, alaBgpPeerRcvdMsgs Counter32, alaBgpPeerSentMsgs Counter32, alaBgpPeerRcvdUpdMsgs Counter32, alaBgpPeerSentUpdMsgs Counter32, alaBgpPeerLastTransitionTime TimeTicks, alaBgpPeerLastUpTime TimeTicks, alaBgpPeerBgpId IpAddress, alaBgpPeerLocalIntfName DisplayString, alaBgpPeerRestartTime INTEGER, alaBgpPeerRestartState INTEGER, alaBgpPeerRestartFwdState INTEGER, alaBgpPeerIpv6Unicast INTEGER, alaBgpPeerIpv6NextHop Ipv6Address, alaBgpPeerLocalPort INTEGER, alaBgpPeerTcpWindowSize INTEGER, alaBgpPeerActivateIpv6 INTEGER, alaBgpPeerBfdStatus INTEGER, alaBgpPeerPrefix6ListOut DisplayString, alaBgpPeerPrefix6ListIn DisplayString } alaBgpPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ip Address of the peer." ::= { alaBgpPeerEntry 1 } alaBgpPeerAS OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Autonomous system of the peer." DEFVAL { 1 } ::= { alaBgpPeerEntry 2 } alaBgpPeerPassive OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection." DEFVAL { disable } ::= { alaBgpPeerEntry 3 } alaBgpPeerName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..60)) MAX-ACCESS read-write STATUS current DESCRIPTION "A symbolic name for the neighbour." DEFVAL { "" } ::= { alaBgpPeerEntry 4 } alaBgpPeerMultiHop OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled the external peer is allowed to be multiple hops away." DEFVAL { disable } ::= { alaBgpPeerEntry 5 } alaBgpPeerMaxPrefix OBJECT-TYPE SYNTAX Gauge32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode." DEFVAL { 5000 } ::= { alaBgpPeerEntry 6 } alaBgpPeerMaxPrefixWarnOnly OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP debug for type 'warnings' must be activated and debug level set to 20." DEFVAL { enable } ::= { alaBgpPeerEntry 7 } alaBgpPeerNextHopSelf OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the ip address of the interface attached to this peer." DEFVAL { disable } ::= { alaBgpPeerEntry 8 } alaBgpPeerSoftReconfig OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic policy configurability on the connection to this peer." DEFVAL { disable } ::= { alaBgpPeerEntry 9 } alaBgpPeerInSoftReset OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Route refresh capability is Enabled/Disabled on the connection to this peer." DEFVAL { enabled } ::= { alaBgpPeerEntry 10 } alaBgpPeerIpv4Unicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer ." DEFVAL { enabled } ::= { alaBgpPeerEntry 11 } alaBgpPeerIpv4Multicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer ." DEFVAL { enabled } ::= { alaBgpPeerEntry 12 } alaBgpPeerRcvdRtRefreshMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of route refresh messages received from this peer." ::= { alaBgpPeerEntry 13 } alaBgpPeerSentRtRefreshMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of route refresh messages sent to this peer." ::= { alaBgpPeerEntry 14 } alaBgpPeerRouteMapOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName." DEFVAL { "" } ::= { alaBgpPeerEntry 15 } alaBgpPeerRouteMapIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName." DEFVAL { "" } ::= { alaBgpPeerEntry 16 } alaBgpPeerLocalAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Local Ip Address of this connection." DEFVAL { '00000000'H } ::= { alaBgpPeerEntry 17 } alaBgpPeerLastDownReason OBJECT-TYPE SYNTAX INTEGER { userRequest(1), connectionTimeout(2), holdTimeout(3), badMsg(4), fsmUnexpectedEvent(5), peerClosed(6), peerNotify(7), transportError(8), none(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The general reason for termination of last established session with the peer since the protocol was operationally up." ::= { alaBgpPeerEntry 18 } alaBgpPeerLastDownTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since the BGP session with the peer was terminated." ::= { alaBgpPeerEntry 19 } alaBgpPeerLastReadTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since we last read data from the peer." ::= { alaBgpPeerEntry 20 } alaBgpPeerRcvdNotifyMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of notification messages received from this peer." ::= { alaBgpPeerEntry 21 } alaBgpPeerSentNotifyMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of notification messages sent to this peer." ::= { alaBgpPeerEntry 22 } alaBgpPeerLastSentNotifyReason OBJECT-TYPE SYNTAX INTEGER { msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last notification reason sent." ::= { alaBgpPeerEntry 23 } alaBgpPeerLastRecvNotifyReason OBJECT-TYPE SYNTAX INTEGER { msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last notification reason received." ::= { alaBgpPeerEntry 24 } alaBgpPeerRcvdPrefixes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of prefixes received from this peer." ::= { alaBgpPeerEntry 25 } alaBgpPeerDownTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of times this peer session transitioned to IDLE state." ::= { alaBgpPeerEntry 26 } alaBgpPeerType OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether the peer belongs to the local autonomous system(internal) or another autonmous system." ::= { alaBgpPeerEntry 27 } alaBgpPeerClearCounter OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of clear into this variable will clear the per peer statistics." DEFVAL { clear } ::= { alaBgpPeerEntry 28 } alaBgpPeerAutoReStart OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state." DEFVAL { enable } ::= { alaBgpPeerEntry 29 } alaBgpPeerClientStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled this peer is a route reflection client." DEFVAL { disable } ::= { alaBgpPeerEntry 30 } alaBgpPeerConfedStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled this peer is a member of our confederation." DEFVAL { disable } ::= { alaBgpPeerEntry 31 } alaBgpPeerRemovePrivateAs OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled private as numbers are stripped out in the updates sent to this peer." DEFVAL { disable } ::= { alaBgpPeerEntry 32 } alaBgpPeerTTL OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL count for packets on this TCP connection." DEFVAL { 255 } ::= { alaBgpPeerEntry 33 } alaBgpPeerAspathListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 34 } alaBgpPeerAspathListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 35 } alaBgpPeerPrefixListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 36 } alaBgpPeerPrefixListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 37 } alaBgpPeerCommunityListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 38 } alaBgpPeerCommunityListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 39 } alaBgpPeerRestart OBJECT-TYPE SYNTAX INTEGER { restart(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of restart into this variable will restart the peer." DEFVAL { restart } ::= { alaBgpPeerEntry 40 } alaBgpPeerDefaultOriginate OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled a default route is sent to this neighbour." DEFVAL { disable } ::= { alaBgpPeerEntry 41 } alaBgpPeerReconfigureInBound OBJECT-TYPE SYNTAX INTEGER { reconfigure(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer." DEFVAL { reconfigure } ::= { alaBgpPeerEntry 42 } alaBgpPeerReconfigureOutBound OBJECT-TYPE SYNTAX INTEGER { reconfigure(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer." DEFVAL { reconfigure } ::= { alaBgpPeerEntry 43 } alaBgpPeerMD5Key OBJECT-TYPE SYNTAX DisplayString(SIZE(0..200)) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant." DEFVAL { "" } ::= { alaBgpPeerEntry 44 } alaBgpPeerMD5KeyEncrypt OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot." DEFVAL { "" } ::= { alaBgpPeerEntry 45 } alaBgpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable." DEFVAL { notInService } ::= { alaBgpPeerEntry 46 } alaBgpPeerUpTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of times this peer session transitioned to ESTABLISHED state." ::= { alaBgpPeerEntry 47 } alaBgpPeerLastWriteTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since we last sent data to the peer." ::= { alaBgpPeerEntry 48 } alaBgpPeerRcvdMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of messages received from the peer." ::= { alaBgpPeerEntry 49 } alaBgpPeerSentMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of messages sent to the peer." ::= { alaBgpPeerEntry 50 } alaBgpPeerRcvdUpdMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of update messages received from the peer." ::= { alaBgpPeerEntry 51 } alaBgpPeerSentUpdMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of update messages sent to the peer." ::= { alaBgpPeerEntry 52 } alaBgpPeerLastTransitionTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since the BGP session was operationally up or down to the peer." ::= { alaBgpPeerEntry 53 } alaBgpPeerLastUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since the BGP session with the peer was established." ::= { alaBgpPeerEntry 54 } alaBgpPeerBgpId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "BGP Identifier of the peer." ::= { alaBgpPeerEntry 55 } alaBgpPeerLocalIntfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The user defined name used to identify the local IP interface for this peer's TCP connection." ::= { alaBgpPeerEntry 56 } alaBgpPeerRestartTime OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability." ::= { alaBgpPeerEntry 57 } alaBgpPeerRestartState OBJECT-TYPE SYNTAX INTEGER { notRestarting(1), restarting(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart." ::= { alaBgpPeerEntry 58 } alaBgpPeerRestartFwdState OBJECT-TYPE SYNTAX INTEGER { notPreserved(1), preserved(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved." ::= { alaBgpPeerEntry 59 } alaBgpPeerIpv6Unicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message." ::= { alaBgpPeerEntry 60 } alaBgpPeerIpv6NextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 nexthop for IPv6 routes advertised to this peer." ::= { alaBgpPeerEntry 61 } alaBgpPeerLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The local port number for this peer's TCP connection." ::= { alaBgpPeerEntry 62 } alaBgpPeerTcpWindowSize OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the socket buffers, in bytes, used for this TCP connection." ::= { alaBgpPeerEntry 63 } alaBgpPeerActivateIpv6 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message." DEFVAL { disabled } ::= { alaBgpPeerEntry 64 } alaBgpPeerBfdStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables/Disables BFd for a particular Peer." ::= { alaBgpPeerEntry 65} alaBgpPeerPrefix6ListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 66 } alaBgpPeerPrefix6ListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId." DEFVAL { "" } ::= { alaBgpPeerEntry 67 } -- -- Bgp Aggregate configuration table -- alaBgpAggrTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Aggregate configuration table." ::= { alcatelIND1BGPMIBObjects 3 } alaBgpAggrEntry OBJECT-TYPE SYNTAX AlaBgpAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Aggregation entry." INDEX { alaBgpAggrAddr, alaBgpAggrMask } ::= { alaBgpAggrTable 1 } AlaBgpAggrEntry ::= SEQUENCE { alaBgpAggrAddr IpAddress, alaBgpAggrMask IpAddress, alaBgpAggrSummarize INTEGER, alaBgpAggrSet INTEGER, alaBgpAggrState INTEGER, alaBgpAggrMetric Gauge32, alaBgpAggrLocalPref Gauge32, alaBgpAggrCommunity DisplayString, alaBgpAggrRowStatus RowStatus } alaBgpAggrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregate address." ::= { alaBgpAggrEntry 1 } alaBgpAggrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregate Mask." ::= { alaBgpAggrEntry 2 } alaBgpAggrSummarize OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled only aggregate is advertised. Otherwise more specific routes are also advertised." DEFVAL { disable } ::= { alaBgpAggrEntry 3 } alaBgpAggrSet OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled aggregate all aspaths." DEFVAL { disable } ::= { alaBgpAggrEntry 4 } alaBgpAggrState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "if active the aggregate is actively being advertised." ::= { alaBgpAggrEntry 5 } alaBgpAggrMetric OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the MED to be used when advertising this aggregate to external peers. A value of 0 indicates not to send MED." DEFVAL { 0 } ::= { alaBgpAggrEntry 6 } alaBgpAggrLocalPref OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the override default LOCAL PREF to be used when advertising this aggregate to internal peers. A value of 0 indicates not to override the default." DEFVAL { 0 } ::= { alaBgpAggrEntry 7 } alaBgpAggrCommunity OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the COMMUNITY attribute when advertising this aggregate." DEFVAL { "" } ::= { alaBgpAggrEntry 8 } alaBgpAggrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable." DEFVAL { notInService } ::= { alaBgpAggrEntry 9 } -- -- Bgp Network configuration Table -- alaBgpNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Network configuration table." ::= { alcatelIND1BGPMIBObjects 4 } alaBgpNetworkEntry OBJECT-TYPE SYNTAX AlaBgpNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Network entry." INDEX { alaBgpNetworkAddr, alaBgpNetworkMask } ::= { alaBgpNetworkTable 1 } AlaBgpNetworkEntry ::= SEQUENCE { alaBgpNetworkAddr IpAddress, alaBgpNetworkMask IpAddress, alaBgpNetworkState INTEGER, alaBgpNetworkMetric Gauge32, alaBgpNetworkLocalPref Gauge32, alaBgpNetworkCommunity DisplayString, alaBgpNetworkRowStatus RowStatus } alaBgpNetworkAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregate address." ::= { alaBgpNetworkEntry 1 } alaBgpNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregate Mask." ::= { alaBgpNetworkEntry 2 } alaBgpNetworkState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the network is being actively advertised or not." ::= { alaBgpNetworkEntry 3 } alaBgpNetworkMetric OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED." DEFVAL { 0 } ::= { alaBgpNetworkEntry 4 } alaBgpNetworkLocalPref OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default." DEFVAL { 0 } ::= { alaBgpNetworkEntry 5 } alaBgpNetworkCommunity OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the COMMUNITY attribute when advertising this network." DEFVAL { "" } ::= { alaBgpNetworkEntry 6 } alaBgpNetworkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable." DEFVAL { notInService } ::= { alaBgpNetworkEntry 7 } -- -- Bgp Routing table -- alaBgpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Routing table." ::= { alcatelIND1BGPMIBObjects 5 } alaBgpRouteEntry OBJECT-TYPE SYNTAX AlaBgpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Route entry." INDEX { alaBgpRouteAddr, alaBgpRouteMask } ::= { alaBgpRouteTable 1 } AlaBgpRouteEntry ::= SEQUENCE { alaBgpRouteAddr IpAddress, alaBgpRouteMask IpAddress, alaBgpRouteState INTEGER, alaBgpRoutePaths Counter32, alaBgpRouteFeasiblePaths Counter32, alaBgpRouteNextHop IpAddress, alaBgpRouteIgpNextHop IpAddress, alaBgpRouteIsHidden INTEGER, alaBgpRouteIsAggregate INTEGER, alaBgpRouteIsAggregateContributor INTEGER, alaBgpRouteAdvNeighbors DisplayString, alaBgpRouteIsAggregateList INTEGER, alaBgpRouteIsAggregateWait INTEGER, alaBgpRouteIsOnEbgpChgList INTEGER, alaBgpRouteIsOnIbgpClientChgList INTEGER, alaBgpRouteIsOnIbgpChgList INTEGER, alaBgpRouteIsOnLocalChgList INTEGER, alaBgpRouteIsOnDeleteList INTEGER, alaBgpRouteIsDampened INTEGER } alaBgpRouteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination address." ::= { alaBgpRouteEntry 1 } alaBgpRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination Mask." ::= { alaBgpRouteEntry 2 } alaBgpRouteState OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is being actively advertised or not." ::= { alaBgpRouteEntry 3 } alaBgpRoutePaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total paths available to this destination." ::= { alaBgpRouteEntry 4 } alaBgpRouteFeasiblePaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Feasible paths available to this destination." ::= { alaBgpRouteEntry 5 } alaBgpRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Nexthop to reach this destination." ::= { alaBgpRouteEntry 6 } alaBgpRouteIgpNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IGP Nexthop to reach this destination." ::= { alaBgpRouteEntry 7 } alaBgpRouteIsHidden OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is hidden by an aggregate." ::= { alaBgpRouteEntry 8 } alaBgpRouteIsAggregate OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is an aggregate." ::= { alaBgpRouteEntry 9 } alaBgpRouteIsAggregateContributor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is a contributor to an aggregate." ::= { alaBgpRouteEntry 10 } alaBgpRouteAdvNeighbors OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "List of (addresses of) neighbours to whom this route has been advertised is encoded here." ::= { alaBgpRouteEntry 11 } alaBgpRouteIsAggregateList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is on an aggregate list." ::= { alaBgpRouteEntry 12 } alaBgpRouteIsAggregateWait OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is an aggregate waiting for a contributor." ::= { alaBgpRouteEntry 13 } alaBgpRouteIsOnEbgpChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of EBGP routes." ::= { alaBgpRouteEntry 14 } alaBgpRouteIsOnIbgpClientChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of IBGP reflector-client routes." ::= { alaBgpRouteEntry 15 } alaBgpRouteIsOnIbgpChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of IBGP non-reflector-client routes." ::= { alaBgpRouteEntry 16 } alaBgpRouteIsOnLocalChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of local routes." ::= { alaBgpRouteEntry 17 } alaBgpRouteIsOnDeleteList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on delete list." ::= { alaBgpRouteEntry 18 } alaBgpRouteIsDampened OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is being route flap dampened." ::= { alaBgpRouteEntry 19 } -- -- BGP path table -- alaBgpPathTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Path table." ::= { alcatelIND1BGPMIBObjects 6 } alaBgpPathEntry OBJECT-TYPE SYNTAX AlaBgpPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP path entry." INDEX { alaBgpPathAddr, alaBgpPathMask, alaBgpPathPeerAddr, alaBgpPathSrcProto } ::= { alaBgpPathTable 1 } AlaBgpPathEntry ::= SEQUENCE { alaBgpPathAddr IpAddress, alaBgpPathMask IpAddress, alaBgpPathPeerAddr IpAddress, alaBgpPathSrcProto INTEGER, alaBgpPathWeight INTEGER, alaBgpPathPref Gauge32, alaBgpPathState INTEGER, alaBgpPathOrigin INTEGER, alaBgpPathNextHop IpAddress, alaBgpPathAs DisplayString, alaBgpPathLocalPref INTEGER, alaBgpPathMed Gauge32, alaBgpPathAtomic INTEGER, alaBgpPathAggregatorAs INTEGER, alaBgpPathAggregatorAddr IpAddress, alaBgpPathCommunity DisplayString, alaBgpPathUnknownAttr OCTET STRING, alaBgpPathOriginatorId IpAddress, alaBgpPathClusterList DisplayString, alaBgpPathPeerInetType INTEGER, alaBgpPathPeerName DisplayString } alaBgpPathAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination address." ::= { alaBgpPathEntry 1 } alaBgpPathMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination Mask." ::= { alaBgpPathEntry 2 } alaBgpPathPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address or the BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0. For peers with an IPv4 address, the value will be the peer's IPv4 address, and the value of alaBgpPathPeerInetType will be ipv4. For peers with an IPv6 address, the value will be the peer's BGP Identifier, and the value of alaBgpPathPeerInetType will be ipv6." ::= { alaBgpPathEntry 3 } alaBgpPathSrcProto OBJECT-TYPE SYNTAX INTEGER { other(1), -- not specified local(2), -- local interfaces static(3), -- static routes directHost(4), -- hosts on a directly connected network rip(5), -- Routing Information Protocol ospf(6), -- Open Shortest Path First isis(7), -- IS-IS -- bgp(8) Border Gateway Protocol ebgp(9), -- External BGP ibgp(10), -- Internal BGP aggregate(11), -- Aggregate network(12) -- Network Command Route } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol from which the path was learnt." ::= { alaBgpPathEntry 4 } alaBgpPathWeight OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The weight assigned to this path." ::= { alaBgpPathEntry 5 } alaBgpPathPref OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The degree of preference assigned to this path." ::= { alaBgpPathEntry 6 } alaBgpPathState OBJECT-TYPE SYNTAX INTEGER { best(1), feasible(2), policyWait(3), unSynchronized(4), dampened(5), none(6), stale(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart." ::= { alaBgpPathEntry 7 } alaBgpPathOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1), egp(2), incomplete(3), none(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ORIGIN attribute of the path." ::= { alaBgpPathEntry 8 } alaBgpPathNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The NEXTHOP attribute of the path." ::= { alaBgpPathEntry 9 } alaBgpPathAs OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence of AS path segments. Each AS path segment is represented by a triple . The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;." ::= { alaBgpPathEntry 10 } alaBgpPathLocalPref OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute." ::= { alaBgpPathEntry 11 } alaBgpPathMed OBJECT-TYPE SYNTAX Gauge32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute." ::= { alaBgpPathEntry 12 } alaBgpPathAtomic OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this path is generated without selecting a less specific route." ::= { alaBgpPathEntry 13 } alaBgpPathAggregatorAs OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute." ::= { alaBgpPathEntry 14 } alaBgpPathAggregatorAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute." ::= { alaBgpPathEntry 15 } alaBgpPathCommunity OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The community attribute of the path. The communities are represented as series of 4 octet values." ::= { alaBgpPathEntry 16 } alaBgpPathUnknownAttr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object." ::= { alaBgpPathEntry 17 } alaBgpPathOriginatorId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7" ::= { alaBgpPathEntry 18 } alaBgpPathClusterList OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7" ::= { alaBgpPathEntry 19 } alaBgpPathPeerInetType OBJECT-TYPE SYNTAX INTEGER { unknown(0), -- unknown, for local routes ipv4(1), -- IPv4 peer address ipv6(2) -- IPv6 peer address } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the peer who sent this path has an IPv4 address or an IPv6 address. If set to ipv4, the peer has an IPv4 address, and the value of alaBgpPathPeerAddr is the peer's IPv4 address. If set to ipv6, the peer has an IPv6 address, and the value of alaBgpPathPeerAddr is the peer's BGP Identifier. For locally sourced routes, the value is set to unknown." ::= { alaBgpPathEntry 20 } alaBgpPathPeerName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..60)) MAX-ACCESS read-only STATUS current DESCRIPTION "The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'." DEFVAL { "" } ::= { alaBgpPathEntry 21 } --- --- BGP Dampening --- alaBgpDampTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpDampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Dampened paths table." ::= { alcatelIND1BGPMIBObjects 7 } alaBgpDampEntry OBJECT-TYPE SYNTAX AlaBgpDampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Network entry." INDEX { alaBgpDampAddr, alaBgpDampMask, alaBgpDampPeerAddr } ::= { alaBgpDampTable 1 } AlaBgpDampEntry ::= SEQUENCE { alaBgpDampAddr IpAddress, alaBgpDampMask IpAddress, alaBgpDampPeerAddr IpAddress, alaBgpDampFigureOfMerit INTEGER, alaBgpDampFlaps Counter32, alaBgpDampDuration TimeTicks, alaBgpDampLastUpdateTime TimeTicks, alaBgpDampReuseTime TimeTicks, alaBgpDampClear INTEGER } alaBgpDampAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination address." ::= { alaBgpDampEntry 1 } alaBgpDampMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination mask." ::= { alaBgpDampEntry 2 } alaBgpDampPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour address." ::= { alaBgpDampEntry 3 } alaBgpDampFigureOfMerit OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The figure of merit value. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945." ::= { alaBgpDampEntry 4 } alaBgpDampFlaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this route has flapped." ::= { alaBgpDampEntry 5 } alaBgpDampDuration OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time in seconds since the flap was noticed." ::= { alaBgpDampEntry 6 } alaBgpDampLastUpdateTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time in seconds since this damp entry (figure of merit) was last updated." ::= { alaBgpDampEntry 7 } alaBgpDampReuseTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time in seconds until this route will be reused." ::= { alaBgpDampEntry 8 } alaBgpDampClear OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "A value of clear will clear this damp history information." DEFVAL { clear } ::= { alaBgpDampEntry 9 } -- -- BGP Policy parameters -- alaBgpPolicy OBJECT IDENTIFIER ::= { alcatelIND1BGPMIBObjects 8 } --- Policy RoutemapList alaBgpRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Policy RouteMap table." ::= { alaBgpPolicy 1 } alaBgpRouteMapEntry OBJECT-TYPE SYNTAX AlaBgpRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Route Map Entry." INDEX { alaBgpRouteMapName, alaBgpRouteMapInst } ::= { alaBgpRouteMapTable 1 } AlaBgpRouteMapEntry ::= SEQUENCE { alaBgpRouteMapName DisplayString, alaBgpRouteMapInst INTEGER, alaBgpRouteMapAsPathMatchListId DisplayString, alaBgpRouteMapPrefixMatchListId DisplayString, alaBgpRouteMapCommunityMatchListId DisplayString, alaBgpRouteMapOrigin INTEGER, alaBgpRouteMapLocalPref Gauge32, alaBgpRouteMapLocalPrefMode INTEGER, alaBgpRouteMapMed Gauge32, alaBgpRouteMapMedMode INTEGER, alaBgpRouteMapAsPrepend DisplayString, alaBgpRouteMapSetCommunityMode INTEGER, alaBgpRouteMapCommunity DisplayString, alaBgpRouteMapMatchAsRegExp DisplayString, alaBgpRouteMapMatchPrefix IpAddress, alaBgpRouteMapMatchMask IpAddress, alaBgpRouteMapMatchCommunity DisplayString, alaBgpRouteMapWeight INTEGER, alaBgpRouteMapAction INTEGER, alaBgpRouteMapRowStatus RowStatus } alaBgpRouteMapName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the route map." ::= { alaBgpRouteMapEntry 1 } alaBgpRouteMapInst OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Instance of this route map." ::= { alaBgpRouteMapEntry 2 } alaBgpRouteMapAsPathMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is same as alaBgpAspathMatchListId. It identifies the matching criteria list of Autonomous system paths. Empty quotes indicate no autonomous system paths matching criteria is to be applied." DEFVAL { "" } ::= { alaBgpRouteMapEntry 3 } alaBgpRouteMapPrefixMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is same as alaBgpPrefixMatchListId. It identifies the matching criteria list of prefixes. Empty quotes indicate no prefix matching criteria is to be applied." DEFVAL { "" } ::= { alaBgpRouteMapEntry 4 } alaBgpRouteMapCommunityMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is same as alaBgpCommunityMatchListId. It identifies the matching criteria list of communities. Empty quotes indicate no community matching criteria is to be applied." DEFVAL { "" } ::= { alaBgpRouteMapEntry 5 } alaBgpRouteMapOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1), egp(2), incomplete(3), none(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the origin of the routes matched by this RouteMap instance. A value of none means no origin is to be set." DEFVAL { none } ::= { alaBgpRouteMapEntry 6 } alaBgpRouteMapLocalPref OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the LOCAL PREF attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the LOCAL PREF attribute in conjunction with the associated value of alaBgpRouteMapLocalPrefMode." DEFVAL { 0 } ::= { alaBgpRouteMapEntry 7 } alaBgpRouteMapLocalPrefMode OBJECT-TYPE SYNTAX INTEGER { none(1), inc(2), dec(3), rep(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies how alaBgpRouteMapLocalPref is to be operated on an existing LPREF attribute of a route on which this RouteMap instance is applied to." DEFVAL { none } ::= { alaBgpRouteMapEntry 8 } alaBgpRouteMapMed OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the MULTI EXIT DISC attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the MULTI EXIT DISC attribute in conjunction with the associated value of alaBgpRouteMapMedMode." DEFVAL { 0 } ::= { alaBgpRouteMapEntry 9 } alaBgpRouteMapMedMode OBJECT-TYPE SYNTAX INTEGER { none(1), inc(2), dec(3), rep(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies how alaBgpRouteMapMed is to be operated on an existing MULTI EXIT DISC attribute of a route on which this RouteMap instance is applied to." DEFVAL { none } ::= { alaBgpRouteMapEntry 10 } alaBgpRouteMapAsPrepend OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to prepend to the AS_PATH attribute of the routes matched by this RouteMap instance. Empty quotes indicates no AS_PATH prepending is to be done." DEFVAL { "" } ::= { alaBgpRouteMapEntry 11 } alaBgpRouteMapSetCommunityMode OBJECT-TYPE SYNTAX INTEGER { add(1), replace(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether alaBgpRouteMapCommunity will be adding to or replacing the COMMUNITY attribute of the routes matched by this RouteMap instance." DEFVAL { add } ::= { alaBgpRouteMapEntry 12 } alaBgpRouteMapCommunity OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the COMMUNITY attribute of the routes matched by this RouteMap instance." DEFVAL { "" } ::= { alaBgpRouteMapEntry 13 } alaBgpRouteMapMatchAsRegExp OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "AsPath regular expression matching primitive." DEFVAL { "" } ::= { alaBgpRouteMapEntry 14 } alaBgpRouteMapMatchPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Prefix match primitive." DEFVAL { 0 } ::= { alaBgpRouteMapEntry 15 } alaBgpRouteMapMatchMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Prefix match mask primitive" DEFVAL { 0 } ::= { alaBgpRouteMapEntry 16 } alaBgpRouteMapMatchCommunity OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "Community match primitive" DEFVAL { "" } ::= { alaBgpRouteMapEntry 17 } alaBgpRouteMapWeight OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the weight for the incoming route. This parameter has no effect on outbound policy." DEFVAL { 0 } ::= { alaBgpRouteMapEntry 18 } alaBgpRouteMapAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This determines whether to allow a matching route to pass through." DEFVAL { permit } ::= { alaBgpRouteMapEntry 19 } alaBgpRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable" DEFVAL { notInService } ::= { alaBgpRouteMapEntry 20 } --- Policy AspathList alaBgpAspathMatchListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpAspathMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Policy Aspath criteria matching table." ::= { alaBgpPolicy 2 } alaBgpAspathMatchListEntry OBJECT-TYPE SYNTAX AlaBgpAspathMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aspath matching entry ." INDEX { alaBgpAspathMatchListId, alaBgpAspathMatchListRegExp } ::= { alaBgpAspathMatchListTable 1 } AlaBgpAspathMatchListEntry ::= SEQUENCE { alaBgpAspathMatchListId DisplayString, alaBgpAspathMatchListRegExp DisplayString, alaBgpAspathMatchListPriority INTEGER, alaBgpAspathMatchListAction INTEGER, alaBgpAspathMatchListRowStatus RowStatus, alaBgpAspathMatchListSubIndex INTEGER } alaBgpAspathMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of this list of autonomous system path matching criteria." ::= { alaBgpAspathMatchListEntry 1 } alaBgpAspathMatchListRegExp OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "The regular expression identifying the autnomous system paths to be matched by this instance." ::= { alaBgpAspathMatchListEntry 2 } alaBgpAspathMatchListPriority OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathMatchListId." DEFVAL { 1 } ::= { alaBgpAspathMatchListEntry 3 } alaBgpAspathMatchListAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This determines whether to accept or reject a matching route." DEFVAL { deny } ::= { alaBgpAspathMatchListEntry 4 } alaBgpAspathMatchListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable" DEFVAL { notInService } ::= { alaBgpAspathMatchListEntry 5 } alaBgpAspathMatchListSubIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary index of this list." ::= { alaBgpAspathMatchListEntry 6 } --- Policy PrefixList alaBgpPrefixMatchListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpPrefixMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Policy prefix matching criteria table." ::= { alaBgpPolicy 3 } alaBgpPrefixMatchListEntry OBJECT-TYPE SYNTAX AlaBgpPrefixMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Prefix matching instance." INDEX { alaBgpPrefixMatchListId, alaBgpPrefixMatchListAddr, alaBgpPrefixMatchListMask } ::= { alaBgpPrefixMatchListTable 1 } AlaBgpPrefixMatchListEntry ::= SEQUENCE { alaBgpPrefixMatchListId DisplayString, alaBgpPrefixMatchListAddr IpAddress, alaBgpPrefixMatchListMask IpAddress, alaBgpPrefixMatchListGE INTEGER, alaBgpPrefixMatchListLE INTEGER, alaBgpPrefixMatchListAction INTEGER, alaBgpPrefixMatchListRowStatus RowStatus } alaBgpPrefixMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of this list of autonomous system path matching criteria." ::= { alaBgpPrefixMatchListEntry 1 } alaBgpPrefixMatchListAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address to be matched." ::= { alaBgpPrefixMatchListEntry 2 } alaBgpPrefixMatchListMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mask to be matched." ::= { alaBgpPrefixMatchListEntry 3 } alaBgpPrefixMatchListGE OBJECT-TYPE SYNTAX INTEGER(0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListGE must be > length of (alaBgpPrefixMatchListMask) and < alaBgpPrefixMatchListLE." DEFVAL { 0 } ::= { alaBgpPrefixMatchListEntry 4 } alaBgpPrefixMatchListLE OBJECT-TYPE SYNTAX INTEGER(0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListLE must be >= alaBgpPrefixMatchListGE and <= 32." DEFVAL { 0 } ::= { alaBgpPrefixMatchListEntry 5 } alaBgpPrefixMatchListAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This determines whether to accept or reject a matching route." DEFVAL { deny } ::= { alaBgpPrefixMatchListEntry 6 } alaBgpPrefixMatchListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable" DEFVAL { notInService } ::= { alaBgpPrefixMatchListEntry 7 } --- Policy CommunityList alaBgpCommunityMatchListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpCommunityMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Policy Community criteria matching table." ::= { alaBgpPolicy 4 } alaBgpCommunityMatchListEntry OBJECT-TYPE SYNTAX AlaBgpCommunityMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community matching entry ." INDEX { alaBgpCommunityMatchListId, alaBgpCommunityMatchListString } ::= { alaBgpCommunityMatchListTable 1 } AlaBgpCommunityMatchListEntry ::= SEQUENCE { alaBgpCommunityMatchListId DisplayString, alaBgpCommunityMatchListString DisplayString, alaBgpCommunityMatchListPriority INTEGER, alaBgpCommunityMatchListType INTEGER, alaBgpCommunityMatchListAction INTEGER, alaBgpCommunityMatchListRowStatus RowStatus, alaBgpCommunityMatchListSubIndex INTEGER } alaBgpCommunityMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of this list of communities matching criteria." ::= { alaBgpCommunityMatchListEntry 1 } alaBgpCommunityMatchListString OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string identifying the communities to be matched by this instance." ::= { alaBgpCommunityMatchListEntry 2 } alaBgpCommunityMatchListPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityMatchListId." DEFVAL { 0 } ::= { alaBgpCommunityMatchListEntry 3 } alaBgpCommunityMatchListType OBJECT-TYPE SYNTAX INTEGER { exact(1), -- match if community appears exactly as specified occur(2) -- match if community occurs in the -- attribute somewhere } MAX-ACCESS read-write STATUS current DESCRIPTION "This determines the matching type." DEFVAL { exact } ::= { alaBgpCommunityMatchListEntry 4 } alaBgpCommunityMatchListAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This determines whether to accept or reject a matching route." DEFVAL { deny } ::= { alaBgpCommunityMatchListEntry 5 } alaBgpCommunityMatchListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable." DEFVAL { notInService } ::= { alaBgpCommunityMatchListEntry 6 } alaBgpCommunityMatchListSubIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary index of this list." ::= { alaBgpCommunityMatchListEntry 7 } --- Policy AspathList sorted by priority alaBgpAspathPriMatchListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpAspathPriMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority sorted view of BGP Policy Aspath matching table." ::= { alaBgpPolicy 5 } alaBgpAspathPriMatchListEntry OBJECT-TYPE SYNTAX AlaBgpAspathPriMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aspath matching entry ." INDEX { alaBgpAspathPriMatchListId, alaBgpAspathPriMatchListPriority, alaBgpAspathPriMatchListIntIdx } ::= { alaBgpAspathPriMatchListTable 1 } AlaBgpAspathPriMatchListEntry ::= SEQUENCE { alaBgpAspathPriMatchListId DisplayString, alaBgpAspathPriMatchListPriority INTEGER, alaBgpAspathPriMatchListIntIdx INTEGER, alaBgpAspathPriMatchListRegExp DisplayString, alaBgpAspathPriMatchListAction INTEGER, alaBgpAspathPriMatchListRowStatus RowStatus } alaBgpAspathPriMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of this list of autonomous system path matching criteria." ::= { alaBgpAspathPriMatchListEntry 1 } alaBgpAspathPriMatchListPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathPriMatchListId." ::= { alaBgpAspathPriMatchListEntry 2 } alaBgpAspathPriMatchListIntIdx OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the order in which the matching regular expressions are created in the list identified by alaBgpAspathPriMatchListId." ::= { alaBgpAspathPriMatchListEntry 3 } alaBgpAspathPriMatchListRegExp OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "The regular expression identifying the autnomous system paths to be matched by this instance" ::= { alaBgpAspathPriMatchListEntry 4 } alaBgpAspathPriMatchListAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This determines whether to accept or reject a matching route." ::= { alaBgpAspathPriMatchListEntry 5 } alaBgpAspathPriMatchListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Row status variable." ::= { alaBgpAspathPriMatchListEntry 6 } --- Policy CommunityList sorted by priority alaBgpCommunityPriMatchListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpCommunityPriMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority sorted view of BGP Policy Community matching table." ::= { alaBgpPolicy 6 } alaBgpCommunityPriMatchListEntry OBJECT-TYPE SYNTAX AlaBgpCommunityPriMatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community matching entry ." INDEX { alaBgpCommunityPriMatchListId, alaBgpCommunityPriMatchListPriority, alaBgpCommunityPriMatchListIntIdx } ::= { alaBgpCommunityPriMatchListTable 1 } AlaBgpCommunityPriMatchListEntry ::= SEQUENCE { alaBgpCommunityPriMatchListId DisplayString, alaBgpCommunityPriMatchListPriority INTEGER, alaBgpCommunityPriMatchListIntIdx INTEGER, alaBgpCommunityPriMatchListString DisplayString, alaBgpCommunityPriMatchListType INTEGER, alaBgpCommunityPriMatchListAction INTEGER, alaBgpCommunityPriMatchListRowStatus RowStatus } alaBgpCommunityPriMatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of this list of communities matching criteria." ::= { alaBgpCommunityPriMatchListEntry 1 } alaBgpCommunityPriMatchListPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityPriMatchListId." ::= { alaBgpCommunityPriMatchListEntry 2 } alaBgpCommunityPriMatchListIntIdx OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This determines the order in which the matching regular expressions are created in the list identified by alaBgpCommunityPriMatchListId." ::= { alaBgpCommunityPriMatchListEntry 3 } alaBgpCommunityPriMatchListString OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string identifying the communities to be matched by this instance." ::= { alaBgpCommunityPriMatchListEntry 4 } alaBgpCommunityPriMatchListType OBJECT-TYPE SYNTAX INTEGER { exact(1), -- match if community appears exactly as specified occur(2) -- match if community occurs in the -- attribute somewhere } MAX-ACCESS read-only STATUS current DESCRIPTION "This determines the matching type." ::= { alaBgpCommunityPriMatchListEntry 5 } alaBgpCommunityPriMatchListAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This determines whether to accept or reject a matching route." ::= { alaBgpCommunityPriMatchListEntry 6 } alaBgpCommunityPriMatchListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Row status variable" ::= { alaBgpCommunityPriMatchListEntry 7 } --- Policy Prefix6List alaBgpPrefix6MatchListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpPrefix6MatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Policy prefix6 matching criteria table." ::= { alaBgpPolicy 7 } alaBgpPrefix6MatchListEntry OBJECT-TYPE SYNTAX AlaBgpPrefix6MatchListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Prefix6 matching instance." INDEX { alaBgpPrefix6MatchListId, alaBgpPrefix6MatchListAddr, alaBgpPrefix6MatchListAddrLength } ::= { alaBgpPrefix6MatchListTable 1 } AlaBgpPrefix6MatchListEntry ::= SEQUENCE { alaBgpPrefix6MatchListId DisplayString, alaBgpPrefix6MatchListAddr Ipv6Address, alaBgpPrefix6MatchListAddrLength INTEGER, alaBgpPrefix6MatchListGE INTEGER, alaBgpPrefix6MatchListLE INTEGER, alaBgpPrefix6MatchListAction INTEGER, alaBgpPrefix6MatchListRowStatus RowStatus } alaBgpPrefix6MatchListId OBJECT-TYPE SYNTAX DisplayString(SIZE(1..70)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifier of this list of autonomous system path matching criteria." ::= { alaBgpPrefix6MatchListEntry 1 } alaBgpPrefix6MatchListAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Prefix to be matched. A value of 0 indicates default route prefix." ::= { alaBgpPrefix6MatchListEntry 2 } alaBgpPrefix6MatchListAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length in bits of the IPv6 prefix being matched. A value of 0 indicates default route prefix." ::= { alaBgpPrefix6MatchListEntry 3 } alaBgpPrefix6MatchListGE OBJECT-TYPE SYNTAX INTEGER(0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListGE must be > length of (alaBgpPrefix6MatchListAddrLength) and < alaBgpPrefix6MatchListLE." DEFVAL { 0 } ::= { alaBgpPrefix6MatchListEntry 4 } alaBgpPrefix6MatchListLE OBJECT-TYPE SYNTAX INTEGER(0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListLE must be >= alaBgpPrefix6MatchListGE and <= 32." DEFVAL { 0 } ::= { alaBgpPrefix6MatchListEntry 5 } alaBgpPrefix6MatchListAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This determines whether to accept or reject a matching route." DEFVAL { deny } ::= { alaBgpPrefix6MatchListEntry 6 } alaBgpPrefix6MatchListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status variable" DEFVAL { notInService } ::= { alaBgpPrefix6MatchListEntry 7 } -- -- Bgp Redistribution Route table -- alaBgpRedistRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpRedistRouteEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A configuration table which controls the routes to be redistributed by BGP from other routing protocols. This table has been deprecated. Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib." ::= { alcatelIND1BGPMIBObjects 9 } alaBgpRedistRouteEntry OBJECT-TYPE SYNTAX AlaBgpRedistRouteEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A configuration table which controls the routes to be redistributed by BGP from other routing protocols. This entry has been deprecated. Use the alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib." INDEX { alaBgpRedistRouteProto, alaBgpRedistRouteDest, alaBgpRedistRouteMask } ::= { alaBgpRedistRouteTable 1 } AlaBgpRedistRouteEntry ::= SEQUENCE { alaBgpRedistRouteProto INTEGER, alaBgpRedistRouteDest IpAddress, alaBgpRedistRouteMask IpAddress, alaBgpRedistRouteMetric Gauge32, alaBgpRedistRouteLocalPref Gauge32, alaBgpRedistRouteCommunity DisplayString, alaBgpRedistRouteSubnetMatch INTEGER, alaBgpRedistRouteEffect INTEGER, alaBgpRedistRouteRowStatus RowStatus } alaBgpRedistRouteProto OBJECT-TYPE SYNTAX INTEGER { local(2), -- local interfaces static(3), -- static routes rip(5), -- Routing Information Protocol ospf(6), -- Open Shortest Path First ospf2(38), -- 2nd OSPF Instance ospf3(70), -- 3rd OSPF Instance ospf4(102), -- 4th OSPF Instance ospf5(134), -- 5th OSPF Instance ospf6(166), -- 6th OSPF Instance ospf7(198), -- 7th OSPF Instance ospf8(230) -- 8th OSPF instance } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Protocol from where this route is to be imported from. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." ::= { alaBgpRedistRouteEntry 1 } alaBgpRedistRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The destination IP address of this route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." ::= { alaBgpRedistRouteEntry 2 } alaBgpRedistRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The network mask for this route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." ::= { alaBgpRedistRouteEntry 3 } alaBgpRedistRouteMetric OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The med to be sent to external peers. If 0, no med is sent. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." DEFVAL { 0 } ::= { alaBgpRedistRouteEntry 4 } alaBgpRedistRouteLocalPref OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The value to override the default local pref sent to internal peers. If 0, no override is applied. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." DEFVAL { 0 } ::= { alaBgpRedistRouteEntry 5 } alaBgpRedistRouteCommunity OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The value to set the COMMUNITY attribute when advertising this network. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." DEFVAL { "" } ::= { alaBgpRedistRouteEntry 6 } alaBgpRedistRouteSubnetMatch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Redistribute all the subnet routes if it is enabled. Otherwise, redistribute only matching network route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." DEFVAL { enable } ::= { alaBgpRedistRouteEntry 7 } alaBgpRedistRouteEffect OBJECT-TYPE SYNTAX INTEGER { redistribute(1), doNotRedistribute(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Controls the redistribution of routes in this range. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." DEFVAL { redistribute } ::= { alaBgpRedistRouteEntry 8 } alaBgpRedistRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Row status variable. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib." DEFVAL { notInService } ::= { alaBgpRedistRouteEntry 9 } -- -- Bgp logging table -- alaBgpDebugTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpDebugEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "BGP debugging table - has been deprecated in favour of alaDrcTmBgpDebug Configuration." ::= { alcatelIND1BGPMIBObjects 10 } alaBgpDebugEntry OBJECT-TYPE SYNTAX AlaBgpDebugEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "BGP debugging entry - has been deprecated in favour of alaDrcTmBgpDebug Configuration." INDEX { alaBgpDebugEvent } ::= { alaBgpDebugTable 1 } AlaBgpDebugEntry ::= SEQUENCE { alaBgpDebugEvent INTEGER, alaBgpDebugStatus INTEGER, alaBgpDebugDescription DisplayString } alaBgpDebugEvent OBJECT-TYPE SYNTAX INTEGER { damp(1), fsm(2), recvupd(3), sendupd(4), open(5), keepalive(6), notify(7), policy(8), route(9), sync(10), aggr(11), tcp(12), warnings(13), errors(14), redist(15), peer(16), local(17), mip(18), tm(19), info(20), restart(21), all(22) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration." ::= { alaBgpDebugEntry 1 } alaBgpDebugStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration." DEFVAL { disable } ::= { alaBgpDebugEntry 2 } alaBgpDebugDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration." ::= { alaBgpDebugEntry 3 } -- -- Bgp Network6 configuration Table (For IPv6) -- alaBgpNetwork6Table OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpNetwork6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Network6 configuration table." ::= { alcatelIND1BGPMIBObjects 11 } alaBgpNetwork6Entry OBJECT-TYPE SYNTAX AlaBgpNetwork6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Network6 entry." INDEX { alaBgpNetwork6Addr, alaBgpNetwork6MaskLen } ::= { alaBgpNetwork6Table 1 } AlaBgpNetwork6Entry ::= SEQUENCE { alaBgpNetwork6Addr Ipv6Address, alaBgpNetwork6MaskLen Unsigned32, alaBgpNetwork6State INTEGER, alaBgpNetwork6Metric Gauge32, alaBgpNetwork6LocalPref Gauge32, alaBgpNetwork6Community DisplayString, alaBgpNetwork6RowStatus RowStatus } alaBgpNetwork6Addr OBJECT-TYPE SYNTAX Ipv6Address (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the BGP Network." ::= { alaBgpNetwork6Entry 1 } alaBgpNetwork6MaskLen OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of bits that are significant in the IPv6 address prefix of the BGP Network." ::= { alaBgpNetwork6Entry 2 } alaBgpNetwork6State OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the network is being actively advertised or not." ::= { alaBgpNetwork6Entry 3 } alaBgpNetwork6Metric OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED." DEFVAL { 0 } ::= { alaBgpNetwork6Entry 4 } alaBgpNetwork6LocalPref OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default." DEFVAL { 0 } ::= { alaBgpNetwork6Entry 5 } alaBgpNetwork6Community OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the COMMUNITY attribute when advertising this network." DEFVAL { "" } ::= { alaBgpNetwork6Entry 6 } alaBgpNetwork6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable." DEFVAL { notInService } ::= { alaBgpNetwork6Entry 7 } -- -- Bgp IPv6 Routing table -- alaBgpRoute6Table OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpRoute6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP IPv6 Routing table." ::= { alcatelIND1BGPMIBObjects 12 } alaBgpRoute6Entry OBJECT-TYPE SYNTAX AlaBgpRoute6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Route entry." INDEX { alaBgpRoute6Addr, alaBgpRoute6MaskLen } ::= { alaBgpRoute6Table 1 } AlaBgpRoute6Entry ::= SEQUENCE { alaBgpRoute6Addr Ipv6Address, alaBgpRoute6MaskLen Unsigned32, alaBgpRoute6State INTEGER, alaBgpRoute6Paths Counter32, alaBgpRoute6FeasiblePaths Counter32, alaBgpRoute6NextHop Ipv6Address, alaBgpRoute6IgpNextHop Ipv6Address, alaBgpRoute6IsHidden INTEGER, alaBgpRoute6IsAggregate INTEGER, alaBgpRoute6IsAggregateContributor INTEGER, alaBgpRoute6AdvNeighbors DisplayString, alaBgpRoute6IsAggregateList INTEGER, alaBgpRoute6IsAggregateWait INTEGER, alaBgpRoute6IsOnEbgpChgList INTEGER, alaBgpRoute6IsOnIbgpClientChgList INTEGER, alaBgpRoute6IsOnIbgpChgList INTEGER, alaBgpRoute6IsOnLocalChgList INTEGER, alaBgpRoute6IsOnDeleteList INTEGER, alaBgpRoute6IsDampened INTEGER } alaBgpRoute6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Destination address." ::= { alaBgpRoute6Entry 1 } alaBgpRoute6MaskLen OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Destination address length." ::= { alaBgpRoute6Entry 2 } alaBgpRoute6State OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is being actively advertised or not." ::= { alaBgpRoute6Entry 3 } alaBgpRoute6Paths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total paths available to this destination." ::= { alaBgpRoute6Entry 4 } alaBgpRoute6FeasiblePaths OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Feasible paths available to this destination." ::= { alaBgpRoute6Entry 5 } alaBgpRoute6NextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Nexthop to reach this destination." ::= { alaBgpRoute6Entry 6 } alaBgpRoute6IgpNextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The IGP Nexthop to reach this destination." ::= { alaBgpRoute6Entry 7 } alaBgpRoute6IsHidden OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is hidden by an aggregate." ::= { alaBgpRoute6Entry 8 } alaBgpRoute6IsAggregate OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is an aggregate." ::= { alaBgpRoute6Entry 9 } alaBgpRoute6IsAggregateContributor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is a contributor to an aggregate." ::= { alaBgpRoute6Entry 10 } alaBgpRoute6AdvNeighbors OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "List of (addresses of) neighbours to whom this route has been advertised is encoded here." ::= { alaBgpRoute6Entry 11 } alaBgpRoute6IsAggregateList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is on an aggregate list." ::= { alaBgpRoute6Entry 12 } alaBgpRoute6IsAggregateWait OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is an aggregate waiting for a contributor." ::= { alaBgpRoute6Entry 13 } alaBgpRoute6IsOnEbgpChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of EBGP routes." ::= { alaBgpRoute6Entry 14 } alaBgpRoute6IsOnIbgpClientChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of IBGP reflector-client routes." ::= { alaBgpRoute6Entry 15 } alaBgpRoute6IsOnIbgpChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of IBGP non-reflector-client routes." ::= { alaBgpRoute6Entry 16 } alaBgpRoute6IsOnLocalChgList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on list of local routes." ::= { alaBgpRoute6Entry 17 } alaBgpRoute6IsOnDeleteList OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is placed on delete list." ::= { alaBgpRoute6Entry 18 } alaBgpRoute6IsDampened OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route is being route flap dampened." ::= { alaBgpRoute6Entry 19 } -- -- BGP path6 table -- alaBgpPath6Table OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpPath6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP Path table." ::= { alcatelIND1BGPMIBObjects 13 } alaBgpPath6Entry OBJECT-TYPE SYNTAX AlaBgpPath6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP path6 entry." INDEX { alaBgpPath6Addr, alaBgpPath6MaskLen, alaBgpPath6PeerBgpId, alaBgpPath6SrcProto } ::= { alaBgpPath6Table 1 } AlaBgpPath6Entry ::= SEQUENCE { alaBgpPath6Addr Ipv6Address, alaBgpPath6MaskLen Unsigned32, alaBgpPath6PeerBgpId IpAddress, alaBgpPath6SrcProto INTEGER, alaBgpPath6Weight INTEGER, alaBgpPath6Pref Gauge32, alaBgpPath6State INTEGER, alaBgpPath6Origin INTEGER, alaBgpPath6NextHop Ipv6Address, alaBgpPath6As DisplayString, alaBgpPath6LocalPref INTEGER, alaBgpPath6Med Gauge32, alaBgpPath6Atomic INTEGER, alaBgpPath6AggregatorAs INTEGER, alaBgpPath6AggregatorAddr IpAddress, alaBgpPath6Community DisplayString, alaBgpPath6UnknownAttr OCTET STRING, alaBgpPath6OriginatorId IpAddress, alaBgpPath6ClusterList DisplayString, alaBgpPath6PeerName DisplayString } alaBgpPath6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Destination address." ::= { alaBgpPath6Entry 1 } alaBgpPath6MaskLen OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Destination address length." ::= { alaBgpPath6Entry 2 } alaBgpPath6PeerBgpId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0." ::= { alaBgpPath6Entry 3 } alaBgpPath6SrcProto OBJECT-TYPE SYNTAX INTEGER { other(1), -- not specified local(2), -- local interfaces static(3), -- static routes directHost(4), -- hosts on a directly connected network rip(5), -- Routing Information Protocol ospf(6), -- Open Shortest Path First isis(7), -- IS-IS -- bgp(8) Border Gateway Protocol ebgp(9), -- External BGP ibgp(10), -- Internal BGP aggregate(11), -- Aggregate network(12) -- Network Command Route } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol from which the path was learnt." ::= { alaBgpPath6Entry 4 } alaBgpPath6Weight OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The weight assigned to this path." ::= { alaBgpPath6Entry 5 } alaBgpPath6Pref OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The degree of preference assigned to this path." ::= { alaBgpPath6Entry 6 } alaBgpPath6State OBJECT-TYPE SYNTAX INTEGER { best(1), feasible(2), policyWait(3), unSynchronized(4), dampened(5), none(6), stale(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart." ::= { alaBgpPath6Entry 7 } alaBgpPath6Origin OBJECT-TYPE SYNTAX INTEGER { igp(1), egp(2), incomplete(3), none(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ORIGIN attribute of the path." ::= { alaBgpPath6Entry 8 } alaBgpPath6NextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The NEXTHOP attribute of the path." ::= { alaBgpPath6Entry 9 } alaBgpPath6As OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence of AS path segments. Each AS path segment is represented by a triple . The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;" ::= { alaBgpPath6Entry 10 } alaBgpPath6LocalPref OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute." ::= { alaBgpPath6Entry 11 } alaBgpPath6Med OBJECT-TYPE SYNTAX Gauge32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute." ::= { alaBgpPath6Entry 12 } alaBgpPath6Atomic OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this path is generated without selecting a less specific route." ::= { alaBgpPath6Entry 13 } alaBgpPath6AggregatorAs OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute." ::= { alaBgpPath6Entry 14 } alaBgpPath6AggregatorAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute." ::= { alaBgpPath6Entry 15 } alaBgpPath6Community OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The community attribute of the path. The communities are represented as series of 4 octet values." ::= { alaBgpPath6Entry 16 } alaBgpPath6UnknownAttr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object." ::= { alaBgpPath6Entry 17 } alaBgpPath6OriginatorId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7" ::= { alaBgpPath6Entry 18 } alaBgpPath6ClusterList OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7" ::= { alaBgpPath6Entry 19 } alaBgpPath6PeerName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..60)) MAX-ACCESS read-only STATUS current DESCRIPTION "The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'." DEFVAL { "" } ::= { alaBgpPath6Entry 20 } --- --- BGP IPv6 Peer Table --- alaBgpPeer6Table OBJECT-TYPE SYNTAX SEQUENCE OF AlaBgpPeer6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP IPv6 peer table." ::= { alcatelIND1BGPMIBObjects 14 } alaBgpPeer6Entry OBJECT-TYPE SYNTAX AlaBgpPeer6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP IPv6 Peer configuration entry." INDEX { alaBgpPeer6Addr } ::= { alaBgpPeer6Table 1 } AlaBgpPeer6Entry ::= SEQUENCE { alaBgpPeer6Addr Ipv6Address, alaBgpPeer6AS INTEGER, alaBgpPeer6Passive INTEGER, alaBgpPeer6Name DisplayString, alaBgpPeer6MultiHop INTEGER, alaBgpPeer6MaxPrefix Gauge32, alaBgpPeer6MaxPrefixWarnOnly INTEGER, alaBgpPeer6NextHopSelf INTEGER, alaBgpPeer6SoftReconfig INTEGER, alaBgpPeer6InSoftReset INTEGER, alaBgpPeer6Ipv4Unicast INTEGER, alaBgpPeer6Ipv4Multicast INTEGER, alaBgpPeer6RcvdRtRefreshMsgs Counter32, alaBgpPeer6SentRtRefreshMsgs Counter32, alaBgpPeer6RouteMapOut DisplayString, alaBgpPeer6RouteMapIn DisplayString, alaBgpPeer6LocalAddr Ipv6Address, alaBgpPeer6LastDownReason INTEGER, alaBgpPeer6LastDownTime TimeTicks, alaBgpPeer6LastReadTime TimeTicks, alaBgpPeer6RcvdNotifyMsgs Counter32, alaBgpPeer6SentNotifyMsgs Counter32, alaBgpPeer6LastSentNotifyReason INTEGER, alaBgpPeer6LastRecvNotifyReason INTEGER, alaBgpPeer6RcvdPrefixes Counter32, alaBgpPeer6DownTransitions Counter32, alaBgpPeer6Type INTEGER, alaBgpPeer6AutoReStart INTEGER, alaBgpPeer6ClientStatus INTEGER, alaBgpPeer6ConfedStatus INTEGER, alaBgpPeer6RemovePrivateAs INTEGER, alaBgpPeer6ClearCounter INTEGER, alaBgpPeer6TTL INTEGER, alaBgpPeer6AspathListOut DisplayString, alaBgpPeer6AspathListIn DisplayString, alaBgpPeer6PrefixListOut DisplayString, alaBgpPeer6PrefixListIn DisplayString, alaBgpPeer6CommunityListOut DisplayString, alaBgpPeer6CommunityListIn DisplayString, alaBgpPeer6Restart INTEGER, alaBgpPeer6DefaultOriginate INTEGER, alaBgpPeer6ReconfigureInBound INTEGER, alaBgpPeer6ReconfigureOutBound INTEGER, alaBgpPeer6MD5Key DisplayString, alaBgpPeer6MD5KeyEncrypt OCTET STRING, alaBgpPeer6RowStatus RowStatus, alaBgpPeer6UpTransitions Counter32, alaBgpPeer6LastWriteTime TimeTicks, alaBgpPeer6RcvdMsgs Counter32, alaBgpPeer6SentMsgs Counter32, alaBgpPeer6RcvdUpdMsgs Counter32, alaBgpPeer6SentUpdMsgs Counter32, alaBgpPeer6LastTransitionTime TimeTicks, alaBgpPeer6LastUpTime TimeTicks, alaBgpPeer6BgpId IpAddress, alaBgpPeer6LocalIntfName DisplayString, alaBgpPeer6RestartTime INTEGER, alaBgpPeer6RestartState INTEGER, alaBgpPeer6RestartFwdState INTEGER, alaBgpPeer6Ipv6Unicast INTEGER, alaBgpPeer6HoldTime INTEGER, alaBgpPeer6KeepAlive INTEGER, alaBgpPeer6ConnRetryInterval INTEGER, alaBgpPeer6HoldTimeConfigured INTEGER, alaBgpPeer6KeepAliveConfigured INTEGER, alaBgpPeer6Ipv4NextHop IpAddress, alaBgpPeer6Ipv6NextHop Ipv6Address, alaBgpPeer6AdminStatus INTEGER, alaBgpPeer6State INTEGER, alaBgpPeer6LocalPort INTEGER, alaBgpPeer6TcpWindowSize INTEGER, alaBgpPeer6ActivateIpv6 INTEGER, alaBgpPeer6MinRouteAdvertisementInterval INTEGER, alaBgpPeer6Prefix6ListOut DisplayString, alaBgpPeer6Prefix6ListIn DisplayString } alaBgpPeer6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Ipv6 Address of the peer." ::= { alaBgpPeer6Entry 1 } alaBgpPeer6AS OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Autonomous system of the peer." DEFVAL { 1 } ::= { alaBgpPeer6Entry 2 } alaBgpPeer6Passive OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection." DEFVAL { disable } ::= { alaBgpPeer6Entry 3 } alaBgpPeer6Name OBJECT-TYPE SYNTAX DisplayString(SIZE(0..60)) MAX-ACCESS read-write STATUS current DESCRIPTION "A symbolic name for the neighbour." DEFVAL { "" } ::= { alaBgpPeer6Entry 4 } alaBgpPeer6MultiHop OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled the external peer is allowed to be multiple hops away." DEFVAL { disable } ::= { alaBgpPeer6Entry 5 } alaBgpPeer6MaxPrefix OBJECT-TYPE SYNTAX Gauge32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode." DEFVAL { 5000 } ::= { alaBgpPeer6Entry 6 } alaBgpPeer6MaxPrefixWarnOnly OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP debug for type 'warnings' must be activated and debug level set to 20." DEFVAL { enable } ::= { alaBgpPeer6Entry 7 } alaBgpPeer6NextHopSelf OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the IPv6 address of the interface attached to this peer." DEFVAL { disable } ::= { alaBgpPeer6Entry 8 } alaBgpPeer6SoftReconfig OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic policy configurability on the connection to this peer." DEFVAL { disable } ::= { alaBgpPeer6Entry 9 } alaBgpPeer6InSoftReset OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Route refresh capability is Enabled/Disabled on the connection to this peer." DEFVAL { enabled } ::= { alaBgpPeer6Entry 10 } alaBgpPeer6Ipv4Unicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer ." DEFVAL { enabled } ::= { alaBgpPeer6Entry 11 } alaBgpPeer6Ipv4Multicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer ." DEFVAL { enabled } ::= { alaBgpPeer6Entry 12 } alaBgpPeer6RcvdRtRefreshMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of route refresh messages received from this peer." ::= { alaBgpPeer6Entry 13 } alaBgpPeer6SentRtRefreshMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of route refresh messages sent to this peer." ::= { alaBgpPeer6Entry 14 } alaBgpPeer6RouteMapOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName." DEFVAL { "" } ::= { alaBgpPeer6Entry 15 } alaBgpPeer6RouteMapIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName." DEFVAL { "" } ::= { alaBgpPeer6Entry 16 } alaBgpPeer6LocalAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "Local IPv6 address of this connection." ::= { alaBgpPeer6Entry 17 } alaBgpPeer6LastDownReason OBJECT-TYPE SYNTAX INTEGER { userRequest(1), connectionTimeout(2), holdTimeout(3), badMsg(4), fsmUnexpectedEvent(5), peerClosed(6), peerNotify(7), transportError(8), none(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The general reason for termination of last established session with the peer since the protocol was operationally up." ::= { alaBgpPeer6Entry 18 } alaBgpPeer6LastDownTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since the BGP session with the peer was terminated." ::= { alaBgpPeer6Entry 19 } alaBgpPeer6LastReadTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since we last read data from the peer." ::= { alaBgpPeer6Entry 20 } alaBgpPeer6RcvdNotifyMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of notification messages received from this peer." ::= { alaBgpPeer6Entry 21 } alaBgpPeer6SentNotifyMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of notification messages sent to this peer." ::= { alaBgpPeer6Entry 22 } alaBgpPeer6LastSentNotifyReason OBJECT-TYPE SYNTAX INTEGER { msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last notification reason sent." ::= { alaBgpPeer6Entry 23 } alaBgpPeer6LastRecvNotifyReason OBJECT-TYPE SYNTAX INTEGER { msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last notification reason received." ::= { alaBgpPeer6Entry 24 } alaBgpPeer6RcvdPrefixes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of prefixes received from this peer." ::= { alaBgpPeer6Entry 25 } alaBgpPeer6DownTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of times this peer session transitioned to IDLE state." ::= { alaBgpPeer6Entry 26 } alaBgpPeer6Type OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether the peer belongs to the local autonomous system(internal) or another autonomous system." ::= { alaBgpPeer6Entry 27 } alaBgpPeer6ClearCounter OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of clear into this variable will clear the per peer statistics." DEFVAL { clear } ::= { alaBgpPeer6Entry 28 } alaBgpPeer6AutoReStart OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state." DEFVAL { enable } ::= { alaBgpPeer6Entry 29 } alaBgpPeer6ClientStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled this peer is a route reflection client." DEFVAL { disable } ::= { alaBgpPeer6Entry 30 } alaBgpPeer6ConfedStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled this peer is a member of our confederation." DEFVAL { disable } ::= { alaBgpPeer6Entry 31 } alaBgpPeer6RemovePrivateAs OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled private as numbers are stripped out in the updates sent to this peer." DEFVAL { disable } ::= { alaBgpPeer6Entry 32 } alaBgpPeer6TTL OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL count for packets on this TCP connection." DEFVAL { 255 } ::= { alaBgpPeer6Entry 33 } alaBgpPeer6AspathListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 34 } alaBgpPeer6AspathListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 35 } alaBgpPeer6PrefixListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 36 } alaBgpPeer6PrefixListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 37 } alaBgpPeer6CommunityListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 38 } alaBgpPeer6CommunityListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 39 } alaBgpPeer6Restart OBJECT-TYPE SYNTAX INTEGER { restart(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of restart into this variable will restart the peer." DEFVAL { restart } ::= { alaBgpPeer6Entry 40 } alaBgpPeer6DefaultOriginate OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled a default route is sent to this neighbour." DEFVAL { disable } ::= { alaBgpPeer6Entry 41 } alaBgpPeer6ReconfigureInBound OBJECT-TYPE SYNTAX INTEGER { reconfigure(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer." DEFVAL { reconfigure } ::= { alaBgpPeer6Entry 42 } alaBgpPeer6ReconfigureOutBound OBJECT-TYPE SYNTAX INTEGER { reconfigure(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer." DEFVAL { reconfigure } ::= { alaBgpPeer6Entry 43 } alaBgpPeer6MD5Key OBJECT-TYPE SYNTAX DisplayString(SIZE(0..200)) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant." DEFVAL { "" } ::= { alaBgpPeer6Entry 44 } alaBgpPeer6MD5KeyEncrypt OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot." DEFVAL { "" } ::= { alaBgpPeer6Entry 45 } alaBgpPeer6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status variable." DEFVAL { notInService } ::= { alaBgpPeer6Entry 46 } alaBgpPeer6UpTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of times this peer session transitioned to ESTABLISHED state." ::= { alaBgpPeer6Entry 47 } alaBgpPeer6LastWriteTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since we last sent data to the peer." ::= { alaBgpPeer6Entry 48 } alaBgpPeer6RcvdMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of messages received from the peer." ::= { alaBgpPeer6Entry 49 } alaBgpPeer6SentMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of messages sent to the peer." ::= { alaBgpPeer6Entry 50 } alaBgpPeer6RcvdUpdMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of update messages received from the peer." ::= { alaBgpPeer6Entry 51 } alaBgpPeer6SentUpdMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of update messages sent to the peer." ::= { alaBgpPeer6Entry 52 } alaBgpPeer6LastTransitionTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since the BGP session was operationally up or down to the peer." ::= { alaBgpPeer6Entry 53 } alaBgpPeer6LastUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed since the BGP session with the peer was established." ::= { alaBgpPeer6Entry 54 } alaBgpPeer6BgpId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "BGP Identifier of the peer." ::= { alaBgpPeer6Entry 55 } alaBgpPeer6LocalIntfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user defined name used to identify the local IPv6 interface for this peer's TCP connection." ::= { alaBgpPeer6Entry 56 } alaBgpPeer6RestartTime OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability." ::= { alaBgpPeer6Entry 57 } alaBgpPeer6RestartState OBJECT-TYPE SYNTAX INTEGER { notRestarting(1), restarting(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart." ::= { alaBgpPeer6Entry 58 } alaBgpPeer6RestartFwdState OBJECT-TYPE SYNTAX INTEGER { notPreserved(1), preserved(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved." ::= { alaBgpPeer6Entry 59 } alaBgpPeer6Ipv6Unicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message." ::= { alaBgpPeer6Entry 60 } alaBgpPeer6HoldTime OBJECT-TYPE SYNTAX INTEGER (0 | 3..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in alaBgpPeer6HoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the session has not been established with the peer, or, the value of alaBgpPeer6HoldTimeConfigured is zero (0)." ::= { alaBgpPeer6Entry 61 } alaBgpPeer6KeepAlive OBJECT-TYPE SYNTAX INTEGER (0 | 1..21845) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with alaBgpPeer6HoldTime, it has the same proportion as what alaBgpPeer6KeepAliveConfigured has when compared with alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), it indicates that the session has not been established with the peer, or, the value of alaBgpPeer6KeepAliveConfigured is zero (0)." ::= { alaBgpPeer6Entry 62 } alaBgpPeer6ConnRetryInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds." ::= { alaBgpPeer6Entry 63 } alaBgpPeer6HoldTimeConfigured OBJECT-TYPE SYNTAX INTEGER (0 | 3..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (alaBgpPeer6HoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be negotiated with the peer. The suggested value for this timer is 90 seconds." ::= { alaBgpPeer6Entry 64 } alaBgpPeer6KeepAliveConfigured OBJECT-TYPE SYNTAX INTEGER (0 | 1..21845) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in alaBgpPeer6HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by alaBgpPeer6KeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds." ::= { alaBgpPeer6Entry 65 } alaBgpPeer6Ipv4NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 nexthop address to be used for IPv4 routes advertised to this peer." ::= { alaBgpPeer6Entry 66 } alaBgpPeer6Ipv6NextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 nexthop address to be used for IPv6 routes advertised to this peer." ::= { alaBgpPeer6Entry 67 } alaBgpPeer6AdminStatus OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication." ::= { alaBgpPeer6Entry 68 } alaBgpPeer6State OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP peer connection state." ::= { alaBgpPeer6Entry 69 } alaBgpPeer6LocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The local port number for this peer's TCP connection." ::= { alaBgpPeer6Entry 70 } alaBgpPeer6TcpWindowSize OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the socket buffers, in bytes, used for this TCP connection." ::= { alaBgpPeer6Entry 71 } alaBgpPeer6ActivateIpv6 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message." DEFVAL { disabled } ::= { alaBgpPeer6Entry 72 } alaBgpPeer6MinRouteAdvertisementInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the MinRouteAdvertisementInterval timer." DEFVAL { 30 } ::= { alaBgpPeer6Entry 73 } alaBgpPeer6Prefix6ListOut OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 74 } alaBgpPeer6Prefix6ListIn OBJECT-TYPE SYNTAX DisplayString(SIZE(0..70)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId." DEFVAL { "" } ::= { alaBgpPeer6Entry 75 } -- compliance statements alcatelIND1BGPMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the BGP4 mib." MODULE -- this module MANDATORY-GROUPS { alabgpMIBGlobalsGroup, alabgpMIBPeerGroup, alabgpMIBAggrGroup, alabgpMIBNetworkGroup, alabgpMIBRouteGroup, alabgpMIBPathAttrGroup, alabgpMIBDampGroup, alabgpMIBRouteMapGroup, alabgpMIBAspathListGroup, alabgpMIBPrefixListGroup, alabgpMIBCommunityListGroup, alabgpMIBAspathPriListGroup, alabgpMIBCommunityPriListGroup, alabgpMIBRedistRouteGroup, alabgpMIBDebugGroup, alabgpMIBNetwork6Group, alabgpMIBRoute6Group, alabgpMIBPath6AttrGroup, alabgpMIBPeer6Group } ::= { alcatelIND1BGPMIBCompliances 1 } -- units of conformance alabgpMIBGlobalsGroup OBJECT-GROUP OBJECTS { alaBgpProtoStatus, alaBgpAutonomousSystemNumber, alaBgpRouterId, alaBgpIgpSynchStatus, alaBgpMedAlways, alaBgpDefaultLocalPref, alaBgpMissingMed, alaBgpManualTag, alaBgpPromiscuousNeighbours, alaBgpConfedId, alaBgpDampening, alaBgpDampHalfLife, alaBgpDampMaxFlapHistory, alaBgpDebugLevel, alaBgpFastExternalFailOver, alaBgpPeerChanges, alaBgpVersion, alaBgpProtoOperState, alaBgpMaxPeers, alaBgpNumActiveRoutes, alaBgpNumEstabExternalPeers, alaBgpNumEstabInternalPeers, alaBgpNumPaths, alaBgpNumFeasiblePaths, alaBgpNumDampenedPaths, alaBgpNumIgpSyncWaitPaths, alaBgpNumPolicyChgPaths, alaBgpMultiPath, alaBgpRouteReflection, alaBgpClusterId, alaBgpDampeningClear, alaBgpDampCutOff, alaBgpDampReuse, alaBgpDampCeil, alaBgpAspathCompare, alaBgpAsOriginInterval, alaBgpMultiProtocolIpv4, alaBgpMultiProtocolIpv6, alaBgpBfdStatus, alaBgpBfdAllNeighborStatus } STATUS current DESCRIPTION "A collection of objects providing information on global BGP state." ::= { alcatelIND1BGPMIBGroups 1 } alabgpMIBPeerGroup OBJECT-GROUP OBJECTS { alaBgpPeerAddr, alaBgpPeerAS, alaBgpPeerPassive, alaBgpPeerName, alaBgpPeerMultiHop, alaBgpPeerMaxPrefix, alaBgpPeerMaxPrefixWarnOnly, alaBgpPeerNextHopSelf, alaBgpPeerSoftReconfig, alaBgpPeerInSoftReset, alaBgpPeerIpv4Unicast, alaBgpPeerIpv4Multicast, alaBgpPeerRcvdRtRefreshMsgs, alaBgpPeerSentRtRefreshMsgs, alaBgpPeerRouteMapOut, alaBgpPeerRouteMapIn, alaBgpPeerLocalAddr, alaBgpPeerLastDownReason, alaBgpPeerLastDownTime, alaBgpPeerLastReadTime, alaBgpPeerRcvdNotifyMsgs, alaBgpPeerSentNotifyMsgs, alaBgpPeerLastSentNotifyReason, alaBgpPeerLastRecvNotifyReason, alaBgpPeerRcvdPrefixes, alaBgpPeerDownTransitions, alaBgpPeerType, alaBgpPeerAutoReStart, alaBgpPeerClientStatus, alaBgpPeerConfedStatus, alaBgpPeerRemovePrivateAs, alaBgpPeerClearCounter, alaBgpPeerTTL, alaBgpPeerAspathListOut, alaBgpPeerAspathListIn, alaBgpPeerPrefixListOut, alaBgpPeerPrefixListIn, alaBgpPeerCommunityListOut, alaBgpPeerCommunityListIn, alaBgpPeerRestart, alaBgpPeerDefaultOriginate, alaBgpPeerReconfigureInBound, alaBgpPeerReconfigureOutBound, alaBgpPeerMD5Key, alaBgpPeerMD5KeyEncrypt, alaBgpPeerRowStatus, alaBgpPeerUpTransitions, alaBgpPeerLastWriteTime, alaBgpPeerRcvdMsgs, alaBgpPeerSentMsgs, alaBgpPeerRcvdUpdMsgs, alaBgpPeerSentUpdMsgs, alaBgpPeerIpv6Unicast, alaBgpPeerIpv6NextHop, alaBgpPeerLocalPort, alaBgpPeerTcpWindowSize, alaBgpPeerActivateIpv6, alaBgpPeerBfdStatus, alaBgpPeerPrefix6ListOut, alaBgpPeerPrefix6ListIn } STATUS current DESCRIPTION "A collection of objects for managing BGP peers." ::= { alcatelIND1BGPMIBGroups 2 } alabgpMIBAggrGroup OBJECT-GROUP OBJECTS { alaBgpAggrAddr, alaBgpAggrMask, alaBgpAggrSummarize, alaBgpAggrSet, alaBgpAggrState, alaBgpAggrMetric, alaBgpAggrLocalPref, alaBgpAggrCommunity, alaBgpAggrRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP aggregates." ::= { alcatelIND1BGPMIBGroups 3 } alabgpMIBNetworkGroup OBJECT-GROUP OBJECTS { alaBgpNetworkAddr, alaBgpNetworkMask, alaBgpNetworkState, alaBgpNetworkMetric, alaBgpNetworkLocalPref, alaBgpNetworkCommunity, alaBgpNetworkRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP networks." ::= { alcatelIND1BGPMIBGroups 4 } alabgpMIBRouteGroup OBJECT-GROUP OBJECTS { alaBgpRouteAddr, alaBgpRouteMask, alaBgpRouteState, alaBgpRoutePaths, alaBgpRouteFeasiblePaths, alaBgpRouteNextHop, alaBgpRouteIgpNextHop, alaBgpRouteIsHidden, alaBgpRouteIsAggregate, alaBgpRouteIsAggregateContributor, alaBgpRouteAdvNeighbors, alaBgpRouteIsAggregateList, alaBgpRouteIsAggregateWait, alaBgpRouteIsOnEbgpChgList, alaBgpRouteIsOnIbgpClientChgList, alaBgpRouteIsOnIbgpChgList, alaBgpRouteIsOnLocalChgList, alaBgpRouteIsOnDeleteList, alaBgpRouteIsDampened } STATUS current DESCRIPTION "A collection of objects for managing BGP routes." ::= { alcatelIND1BGPMIBGroups 5 } alabgpMIBPathAttrGroup OBJECT-GROUP OBJECTS { alaBgpPathAddr, alaBgpPathMask, alaBgpPathPeerAddr, alaBgpPathSrcProto, alaBgpPathWeight, alaBgpPathPref, alaBgpPathState, alaBgpPathOrigin, alaBgpPathNextHop, alaBgpPathAs, alaBgpPathLocalPref, alaBgpPathMed, alaBgpPathAtomic, alaBgpPathAggregatorAs, alaBgpPathAggregatorAddr, alaBgpPathCommunity, alaBgpPathUnknownAttr, alaBgpPathOriginatorId, alaBgpPathClusterList, alaBgpPathPeerInetType, alaBgpPathPeerName } STATUS current DESCRIPTION "A collection of objects for managing BGP paths attributes." ::= { alcatelIND1BGPMIBGroups 6 } alabgpMIBDampGroup OBJECT-GROUP OBJECTS { alaBgpDampAddr, alaBgpDampMask, alaBgpDampPeerAddr, alaBgpDampFigureOfMerit, alaBgpDampFlaps, alaBgpDampDuration, alaBgpDampLastUpdateTime, alaBgpDampReuseTime, alaBgpDampClear } STATUS current DESCRIPTION "A collection of objects for managing BGP dampening." ::= { alcatelIND1BGPMIBGroups 7 } alabgpMIBRouteMapGroup OBJECT-GROUP OBJECTS { alaBgpRouteMapName, alaBgpRouteMapInst, alaBgpRouteMapAsPathMatchListId, alaBgpRouteMapPrefixMatchListId, alaBgpRouteMapCommunityMatchListId, alaBgpRouteMapOrigin, alaBgpRouteMapLocalPref, alaBgpRouteMapLocalPrefMode, alaBgpRouteMapMed, alaBgpRouteMapMedMode, alaBgpRouteMapAsPrepend, alaBgpRouteMapSetCommunityMode, alaBgpRouteMapCommunity, alaBgpRouteMapMatchAsRegExp, alaBgpRouteMapMatchPrefix, alaBgpRouteMapMatchMask, alaBgpRouteMapMatchCommunity, alaBgpRouteMapWeight, alaBgpRouteMapAction, alaBgpRouteMapRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP route maps." ::= { alcatelIND1BGPMIBGroups 8 } alabgpMIBAspathListGroup OBJECT-GROUP OBJECTS { alaBgpAspathMatchListId, alaBgpAspathMatchListRegExp, alaBgpAspathMatchListPriority, alaBgpAspathMatchListAction, alaBgpAspathMatchListRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP aspath lists." ::= { alcatelIND1BGPMIBGroups 9 } alabgpMIBPrefixListGroup OBJECT-GROUP OBJECTS { alaBgpPrefixMatchListId, alaBgpPrefixMatchListAddr, alaBgpPrefixMatchListMask, alaBgpPrefixMatchListGE, alaBgpPrefixMatchListLE, alaBgpPrefixMatchListAction, alaBgpPrefixMatchListRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP prefix lists." ::= { alcatelIND1BGPMIBGroups 10 } alabgpMIBCommunityListGroup OBJECT-GROUP OBJECTS { alaBgpCommunityMatchListId, alaBgpCommunityMatchListString, alaBgpCommunityMatchListPriority, alaBgpCommunityMatchListType, alaBgpCommunityMatchListAction, alaBgpCommunityMatchListRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP community lists." ::= { alcatelIND1BGPMIBGroups 11 } alabgpMIBAspathPriListGroup OBJECT-GROUP OBJECTS { alaBgpAspathPriMatchListId, alaBgpAspathPriMatchListPriority, alaBgpAspathPriMatchListIntIdx, alaBgpAspathPriMatchListRegExp, alaBgpAspathPriMatchListAction, alaBgpAspathPriMatchListRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP aspath lists by priority." ::= { alcatelIND1BGPMIBGroups 12 } alabgpMIBCommunityPriListGroup OBJECT-GROUP OBJECTS { alaBgpCommunityPriMatchListId, alaBgpCommunityPriMatchListPriority, alaBgpCommunityPriMatchListIntIdx, alaBgpCommunityPriMatchListString, alaBgpCommunityPriMatchListType, alaBgpCommunityPriMatchListAction, alaBgpCommunityPriMatchListRowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP community lists by priority." ::= { alcatelIND1BGPMIBGroups 13 } alabgpMIBRedistRouteGroup OBJECT-GROUP OBJECTS { alaBgpRedistRouteProto, alaBgpRedistRouteDest, alaBgpRedistRouteMask, alaBgpRedistRouteMetric, alaBgpRedistRouteLocalPref, alaBgpRedistRouteCommunity, alaBgpRedistRouteSubnetMatch, alaBgpRedistRouteEffect, alaBgpRedistRouteRowStatus } STATUS deprecated DESCRIPTION "A collection of objects for managing BGP redistribution routes. These objects have been deprecated, and this group is no longer mandatory." ::= { alcatelIND1BGPMIBGroups 14 } alabgpMIBDebugGroup OBJECT-GROUP OBJECTS { alaBgpDebugEvent, alaBgpDebugStatus, alaBgpDebugDescription } STATUS current DESCRIPTION "A collection of objects for managing BGP debug infos. These objects have been deprecated, and this group is no longer mandatory." ::= { alcatelIND1BGPMIBGroups 15 } alabgpMIBNetwork6Group OBJECT-GROUP OBJECTS { alaBgpNetwork6Addr, alaBgpNetwork6MaskLen, alaBgpNetwork6State, alaBgpNetwork6Metric, alaBgpNetwork6LocalPref, alaBgpNetwork6Community, alaBgpNetwork6RowStatus } STATUS current DESCRIPTION "A collection of objects for managing BGP IPv6 networks." ::= { alcatelIND1BGPMIBGroups 16 } alabgpMIBRoute6Group OBJECT-GROUP OBJECTS { alaBgpRoute6Addr, alaBgpRoute6MaskLen, alaBgpRoute6State, alaBgpRoute6Paths, alaBgpRoute6FeasiblePaths, alaBgpRoute6NextHop, alaBgpRoute6IgpNextHop, alaBgpRoute6IsHidden, alaBgpRoute6IsAggregate, alaBgpRoute6IsAggregateContributor, alaBgpRoute6AdvNeighbors, alaBgpRoute6IsAggregateList, alaBgpRoute6IsAggregateWait, alaBgpRoute6IsOnEbgpChgList, alaBgpRoute6IsOnIbgpClientChgList, alaBgpRoute6IsOnIbgpChgList, alaBgpRoute6IsOnLocalChgList, alaBgpRoute6IsOnDeleteList, alaBgpRoute6IsDampened } STATUS current DESCRIPTION "A collection of objects for managing BGP routes." ::= { alcatelIND1BGPMIBGroups 17 } alabgpMIBPath6AttrGroup OBJECT-GROUP OBJECTS { alaBgpPath6Addr, alaBgpPath6MaskLen, alaBgpPath6PeerBgpId, alaBgpPath6SrcProto, alaBgpPath6Weight, alaBgpPath6Pref, alaBgpPath6State, alaBgpPath6Origin, alaBgpPath6NextHop, alaBgpPath6As, alaBgpPath6LocalPref, alaBgpPath6Med, alaBgpPath6Atomic, alaBgpPath6AggregatorAs, alaBgpPath6AggregatorAddr, alaBgpPath6Community, alaBgpPath6UnknownAttr, alaBgpPath6OriginatorId, alaBgpPath6ClusterList, alaBgpPath6PeerName } STATUS current DESCRIPTION "A collection of objects for managing BGP paths attributes." ::= { alcatelIND1BGPMIBGroups 18 } alabgpMIBPeer6Group OBJECT-GROUP OBJECTS { alaBgpPeer6Addr, alaBgpPeer6AS, alaBgpPeer6Passive, alaBgpPeer6Name, alaBgpPeer6MultiHop, alaBgpPeer6MaxPrefix, alaBgpPeer6MaxPrefixWarnOnly, alaBgpPeer6NextHopSelf, alaBgpPeer6SoftReconfig, alaBgpPeer6InSoftReset, alaBgpPeer6Ipv4Unicast, alaBgpPeer6Ipv4Multicast, alaBgpPeer6RcvdRtRefreshMsgs, alaBgpPeer6SentRtRefreshMsgs, alaBgpPeer6RouteMapOut, alaBgpPeer6RouteMapIn, alaBgpPeer6LocalAddr, alaBgpPeer6LastDownReason, alaBgpPeer6LastDownTime, alaBgpPeer6LastReadTime, alaBgpPeer6RcvdNotifyMsgs, alaBgpPeer6SentNotifyMsgs, alaBgpPeer6LastSentNotifyReason, alaBgpPeer6LastRecvNotifyReason, alaBgpPeer6RcvdPrefixes, alaBgpPeer6DownTransitions, alaBgpPeer6Type, alaBgpPeer6AutoReStart, alaBgpPeer6ClientStatus, alaBgpPeer6ConfedStatus, alaBgpPeer6RemovePrivateAs, alaBgpPeer6ClearCounter, alaBgpPeer6TTL, alaBgpPeer6AspathListOut, alaBgpPeer6AspathListIn, alaBgpPeer6PrefixListOut, alaBgpPeer6PrefixListIn, alaBgpPeer6CommunityListOut, alaBgpPeer6CommunityListIn, alaBgpPeer6Restart, alaBgpPeer6DefaultOriginate, alaBgpPeer6ReconfigureInBound, alaBgpPeer6ReconfigureOutBound, alaBgpPeer6MD5Key, alaBgpPeer6MD5KeyEncrypt, alaBgpPeer6RowStatus, alaBgpPeer6UpTransitions, alaBgpPeer6LastWriteTime, alaBgpPeer6RcvdMsgs, alaBgpPeer6SentMsgs, alaBgpPeer6RcvdUpdMsgs, alaBgpPeer6SentUpdMsgs, alaBgpPeer6Ipv6Unicast, alaBgpPeer6HoldTime, alaBgpPeer6KeepAlive, alaBgpPeer6ConnRetryInterval, alaBgpPeer6HoldTimeConfigured, alaBgpPeer6KeepAliveConfigured, alaBgpPeer6Ipv4NextHop, alaBgpPeer6Ipv6NextHop, alaBgpPeer6AdminStatus, alaBgpPeer6State, alaBgpPeer6LocalPort, alaBgpPeer6TcpWindowSize, alaBgpPeer6ActivateIpv6, alaBgpPeer6MinRouteAdvertisementInterval, alaBgpPeer6Prefix6ListOut, alaBgpPeer6Prefix6ListIn } STATUS current DESCRIPTION "A collection of objects for managing BGP peers." ::= { alcatelIND1BGPMIBGroups 19 } END