ALCATEL-IND1-CHASSIS-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, NOTIFICATION-TYPE, Unsigned32, Counter32 FROM SNMPv2-SMI PhysicalIndex, entPhysicalIndex FROM ENTITY-MIB hardentIND1Physical, chassisTraps, hardentIND1Chassis FROM ALCATEL-IND1-BASE SnmpAdminString FROM SNMP-FRAMEWORK-MIB DisplayString, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; alcatelIND1ChassisMIB MODULE-IDENTITY LAST-UPDATED "200706180000Z" ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple etwork Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line, this is the Chassis Supervision Chassis MIB for managing physical chassis objects not covered in the IETF Entity MIB (rfc 2737). The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200906090000Z" DESCRIPTION "Added new object chasEntPhysPowerType and TEXTUAL-CONVENTION ChasEntPhysPowerType." REVISION "200906260000Z" DESCRIPTION "Added new object chasEntPhysPowerControlChecksum." REVISION "200706180000Z" DESCRIPTION "Addressing discrepancies with Alcatel Standard." ::= { hardentIND1Chassis 1 } alcatelIND1ChassisMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Managed Objects." ::= { alcatelIND1ChassisMIB 1 } alcatelIND1ChassisMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Conformance Information." ::= { alcatelIND1ChassisMIB 2 } alcatelIND1ChassisMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Units Of Conformance." ::= { alcatelIND1ChassisMIBConformance 1 } alcatelIND1ChassisMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Compliance Statements." ::= { alcatelIND1ChassisMIBConformance 2 } alcatelIND1ChassisPhysMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Managed Objects." ::= { hardentIND1Physical 1 } alcatelIND1ChassisPhysMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Conformance Information." ::= { hardentIND1Physical 2 } alcatelIND1ChassisPhysMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Units Of Conformance." ::= { alcatelIND1ChassisPhysMIBConformance 1 } alcatelIND1ChassisPhysMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Compliance Statements." ::= { alcatelIND1ChassisPhysMIBConformance 2 } -- CONTROL MODULE TABLE chasControlModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasControlModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row for the primary control module." ::= { alcatelIND1ChassisMIBObjects 1 } chasControlModuleEntry OBJECT-TYPE SYNTAX ChasControlModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the primary control module. This table is an extension of the entity physical table but this class is instanciated only for a the primary control module that has a particular Index." INDEX { entPhysicalIndex } ::= { chasControlModuleTable 1 } ChasControlModuleEntry ::= SEQUENCE { chasControlRunningVersion INTEGER, chasControlActivateTimeout INTEGER, chasControlVersionMngt INTEGER, chasControlDelayedActivateTimer Unsigned32, chasControlCertifyStatus INTEGER, chasControlSynchronizationStatus INTEGER, chasControlAcrossCmmWorkingSynchroStatus INTEGER, chasControlAcrossCmmCertifiedSynchroStatus INTEGER } chasControlRunningVersion OBJECT-TYPE SYNTAX INTEGER { unknown(1), working(2), certified(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of the Running Version (or Running Configuration) for the control module. Note that the Running Version value of (1) unknown, (2) working, or (3) certified is returned." ::= { chasControlModuleEntry 1 } chasControlActivateTimeout OBJECT-TYPE SYNTAX INTEGER (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This value is in seconds. It represents how much time before the switch automatically falls back to the certified version. This value is set via the Activate(reload working) cli command. An Activate reboot must be initiated via the primary CMM and that the timeout value can be accessed via user interface to the primary CMM only. After the Activate reboot has been initiated, a timeout will occur (i.e., an Activate Timeout) at the timeout value specified by the user. If a reboot cancel has not been received prior to the timeout expiration, the primary CMM will automatically reboot (i.e., re-reboot) using the certified configuration. This ensures that an automatic backup reboot is available using the certified configuration in the event that the user is unable to interface with primary CMM as a result of the attempted Activate reboot. If the Activate reboot is successful, the user cancels the backup reboot via the normal reboot cancellation process (i.e., a zero value is written for the object chasControlDelayedRebootTimer)." ::= { chasControlModuleEntry 2 } chasControlVersionMngt OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), certifySynchro(2), certifyNoSynchro(3), flashSynchro(4), restore(5), activate(6), issu(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "For the primary this means: notSignificant - No command applied. certifySynchro - Copy the file from the working to the certified directory and from the primary to the secondary (reboot of the secondary). certifyNoSynchro - Copy the file from the working to the certified directory. flashSynchro - Copy the file from the primary to the secondary (reboot of the secondary). restore - Copy the file from the certified directory to the working directory. activate - Reload from the working directory. Activate can be scheduled. issu - In Service Software Upgrade (ISSU). Process can scheduled." ::= { chasControlModuleEntry 3 } chasControlDelayedActivateTimer OBJECT-TYPE SYNTAX Unsigned32 (0..31622400) MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value in seconds used to initiate a delayed activate of the primary CMM. Writing this object to a non-zero value results in CMM reboot of the working directory following expiration of the specified activate timer delay. Writing this object to zero results in an immediately activate process. It is now adjusted to wait a maximum of 366 days." ::= { chasControlModuleEntry 4 } chasControlCertifyStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), needCertify(2), certified(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the control module has been certified (that is the working directory matches the certified directory)" ::= { chasControlModuleEntry 5 } chasControlSynchronizationStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), monoControlModule(2), notSynchronized(3), synchronized(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s) if present). Returned value is monoControlModule when no other control module is present." ::= { chasControlModuleEntry 6 } chasControlAcrossCmmWorkingSynchroStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), monoCMM(2), no(3), yes(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if present)" ::= { chasControlModuleEntry 7 } chasControlAcrossCmmCertifiedSynchroStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), monoCMM(2), no(3), yes(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the /certified has been synchronized across the CMMs if present)" ::= { chasControlModuleEntry 8 } -- CONTROL REDUNDANT TABLE chasControlRedundantTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasControlRedundantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per control module. There is always at least one control module in the system." ::= { alcatelIND1ChassisMIBObjects 2 } chasControlRedundantEntry OBJECT-TYPE SYNTAX ChasControlRedundantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index." INDEX { entPhysicalIndex } ::= { chasControlRedundantTable 1 } ChasControlRedundantEntry ::= SEQUENCE { chasControlNumberOfTakeover Counter32, chasControlDelayedRebootTimer Unsigned32 } chasControlNumberOfTakeover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a count of the number of times the control module has changed from primary to secondary mode as a result of a Takeover. Note that this object can be accessed via user interface to either the primary or secondary CMM. The value returned is the number of times that the interfacing control module (either primary or secondary CMM) has changed from primary to secondary mode. This value does not reflect the total number of CMM Takeovers for the switch. To get the total number of Takeovers for the switch, it is necessary to read this value via user interface to each control module independently." ::= { chasControlRedundantEntry 1 } chasControlDelayedRebootTimer OBJECT-TYPE SYNTAX Unsigned32 (0.. 31622400) MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value (in seconds) used to initiate a delayed reboot of the primary or secondary CMM using the certified configuration. Writing this object to a non-zero value results in a CMM reboot following expiration of the specified reset timer delay. Writing this object to zero results in cancellation of a pending CMM delayed reboot. It is now adjusted to wait a maximum of 366 days." ::= { chasControlRedundantEntry 2 } -- CHASSIS TABLE chasChassisTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per chassis. There is always at least one chassis or many like for stackable product." ::= { alcatelIND1ChassisMIBObjects 3 } chasChassisEntry OBJECT-TYPE SYNTAX ChasChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index." INDEX { entPhysicalIndex } ::= { chasChassisTable 1 } ChasChassisEntry ::= SEQUENCE { chasFreeSlots Unsigned32, chasPowerLeft INTEGER, chasNumberOfResets Counter32, chasHardwareBoardTemp INTEGER, chasHardwareCpuTemp INTEGER, chasTempRange INTEGER, chasTempThreshold INTEGER, chasDangerTempThreshold INTEGER, chasPrimaryPhysicalIndex INTEGER } chasFreeSlots OBJECT-TYPE SYNTAX Unsigned32 (0..18) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of free NI front panel slots." ::= { chasChassisEntry 1 } chasPowerLeft OBJECT-TYPE SYNTAX INTEGER (-100000..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "The power still available on the chassis in Watts." ::= { chasChassisEntry 2 } chasNumberOfResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a count of the number of times this station has been reset since a cold-start." ::= { chasChassisEntry 3 } chasHardwareBoardTemp OBJECT-TYPE SYNTAX INTEGER (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for this chassis. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 4 } chasHardwareCpuTemp OBJECT-TYPE SYNTAX INTEGER (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the SPARC Temperature Sensor (degrees Centigrade) for this chassis. This object is not applicable for Hawk and 0 is returned" ::= { chasChassisEntry 5 } chasTempRange OBJECT-TYPE SYNTAX INTEGER { unknown(1), notPresent(2), underThreshold(3), overFirstThreshold(4), overDangerThreshold(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Temp Range is the value of the temperature sensor for the chassis. The Temp Range value reflects the temperature of the chassis relative to the Temp Threshold value (i.e., over vs. under the threshold)." ::= { chasChassisEntry 6 } chasTempThreshold OBJECT-TYPE SYNTAX INTEGER (1..150) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the threshold temperature in degrees Celsius for the chassis. Temp Threshold is the chassis temperature point at which, when reached due to an ascending or descending temperature transition, a temperature notification is provided to the user. When this threshold is exceeded, we start sending traps and other operator notification." ::= { chasChassisEntry 7 } chasDangerTempThreshold OBJECT-TYPE SYNTAX INTEGER (30..150) MAX-ACCESS read-only STATUS current DESCRIPTION "This Threshold is a second one which is hardcoded. When the Chassis Exceeds this value it starts shutting down NIs. This value will be set by the factory and not changeable." ::= { chasChassisEntry 8 } chasPrimaryPhysicalIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This value holds the Entity Table Physical Index for the Control Module that is currently primary. This is to allow snmp managers to determine which Control Module is currently primary so it knows what entry in the chasControlModuleTable to access for setting the chasControlVersionMngt values for controling the switch." ::= { chasChassisEntry 9 } -- Extension of the Entity physical table chasEntPhysicalTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasEntPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per physical entity. It is an extension for the entity physical table (rfc 2737) that is instantiated for every physical entity object. The fields are not always significant for every object." ::= { alcatelIND1ChassisPhysMIBObjects 1 } chasEntPhysicalEntry OBJECT-TYPE SYNTAX ChasEntPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular physical entity." INDEX { entPhysicalIndex } ::= { chasEntPhysicalTable 1 } ChasEntPhysLed ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber." SYNTAX INTEGER { notApplicable (0), off (1), greenOn (2), greenBlink (3), amberOn (4), amberBlink (5) } ChasEntPhysPowerType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual convention for type of power supply." SYNTAX INTEGER { notApplicable (0), -- entPhysicalClass for this physical entity -- is not powerSupply. ac (1), -- Power Supply is AC dc (2) -- Power Supply is DC } ChasEntPhysicalEntry ::= SEQUENCE { chasEntPhysAdminStatus INTEGER, chasEntPhysOperStatus INTEGER, chasEntPhysLedStatus BITS, chasEntPhysPower INTEGER, chasEntPhysModuleType SnmpAdminString, chasEntPhysMfgDate SnmpAdminString, chasEntPhysPartNumber SnmpAdminString, chasEntPhysLedStatusOk1 ChasEntPhysLed, chasEntPhysLedStatusOk2 ChasEntPhysLed, chasEntPhysLedStatusPrimaryCMM ChasEntPhysLed, chasEntPhysLedStatusSecondaryCMM ChasEntPhysLed, chasEntPhysLedStatusTemperature ChasEntPhysLed, chasEntPhysLedStatusFan ChasEntPhysLed, chasEntPhysLedStatusFan1 ChasEntPhysLed, chasEntPhysLedStatusFan2 ChasEntPhysLed, chasEntPhysLedStatusFan3 ChasEntPhysLed, chasEntPhysLedStatusBackupPS ChasEntPhysLed, chasEntPhysLedStatusInternalPS ChasEntPhysLed, chasEntPhysLedStatusControl ChasEntPhysLed, chasEntPhysLedStatusFabric ChasEntPhysLed, chasEntPhysLedStatusPSU ChasEntPhysLed, chasEntPhysAsicRev SnmpAdminString, chasEntPhysCpldRev SnmpAdminString, chasEntPhysDefaultMinibootRev SnmpAdminString, chasEntPhysBackUpMinibootRev SnmpAdminString, chasEntPhysBootromRev SnmpAdminString, chasEntPhysNiNum INTEGER, chasEntPhysGbicNum INTEGER, chasEntPhysWaveLen INTEGER, chasEntPhysUbootRev SnmpAdminString, chasEntPhysUbootMinibootRev SnmpAdminString, chasEntPhysMacAddress MacAddress, chasEntPhysPoeSwVersion SnmpAdminString, chasEntPhysC20LFailCont INTEGER, chasEntPhysCpuModel SnmpAdminString, chasEntPhysPowerType ChasEntPhysPowerType, chasEntPhysPowerControlChecksum SnmpAdminString } chasEntPhysAdminStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), powerOff(2), powerOn(3), reset(4), takeover(5), resetAll(6), standby(7), resetWithFabric(8), takeoverWithFabrc(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value: powerOn <=> powered up Control Module possible value: powerOn <=> CM up and running reset <=> CM reset takeover <=> Secondary CM takes over resetAll <=> resets the whole switch NI status possible value: powerOn <=> NI is either powered (up or down) or waiting to be powered whenever more power is available. This admin status has not full meaning without chasEntPhysOperStatus powerOff <=> NI down and unpowered and NI will not be powered until user requests it, a failover happens or a reboot happens reset <=> NI reset FABRIC status possible value: powerOn <=> FABRIC is powered powerOff <=> FABRIC is unpowered standby <=> FABRIC is powered and requested to be redundant (inactive) Daughter board status possible value: powerOn <=> DB up and running reset <=> DB reset (TO BE CONFIRMED) Power supply status possible value: powerOn <=> PS up" ::= { chasEntPhysicalEntry 1 } chasEntPhysOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), secondary(5), notPresent(6), unpowered(7), master(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value : up <=> powered up Control Module possible value : notPresent <=> CM not present up <=> CM up and running down <=> CM down and powered secondary <=> CM in secondary mode and running NI status possible value : notPresent <=> NI not present up <=> NI up and running down <=> NI down and powered unpowered <=> NI unpowered because there is not enough power in the system (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF (chasEntPhysAdminStatus = powerOff). This operational status has not full meaning without chasEntPhysAdminStatus Fabric status possible value : master <=> up and acting as master up <=> up and acting as slave secondary <=> secondary mode for redundancy Daughter board status possible value : notPresent <=> DB not present up <=> DB up and running down <=> DB down and powered Power supply status possible value : notPresent <=> PS not present up <=> PS up" ::= { chasEntPhysicalEntry 2 } chasEntPhysLedStatus OBJECT-TYPE SYNTAX BITS { ok1GreenLSBit(0), ok1GreenMSBit(1), ok1AmberLSBit(2), ok1AmberMSBit(3), ok2GreenLSBit(4), ok2GreenMSBit(5), ok2AmberLSBit(6), ok2AmberMSBit(7), controlGreenLSBit(8), controlGreenMSBit(9), controlAmberLSBIt(10), controlAmberMSBIt(11), fabricGreenLSBit(12), fabricGreenMSBit(13), fabricAmberLSBit(14), fabricAmberMSBit(15), tempGreenLSBit(16), tempGreenMSBit(17), tempAmberLSBit(18), tempAmberMSBit(19), fanGreenLSBit(20), fanGreenMSBit(21), fanAmberLSBit(22), fanAmberMSBit(23), powerSupGreenLSBit(24), powerSupGreenMSBit(25), powerSupAmberLSBit(26), powerSupAmberMSBit(27), backupPowerSupGreenLSBit(28), backupPowerSupGreenMSBit(29), backupPowerSupAmberLSBit(30), backupPowerSupAmberMSBit(31) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object has been deprecated because the other enumerated objects can provide the same information. A get to this object will return 0. The status of each of the LEDs of this module. Fuji CFM: [31:30] BPSU amber 00=off 01=on 10=reserved 11=blinking [29:28] PSU green 00=off 01=on 10=reserved 11=blinking [27:26] PSU amber 00=off 01=on 10=reserved 11=blinking [25:24] PSU green 00=off 01=on 10=reserved 11=blinking [23:22] Fan amber 00=off 01=on 10=reserved 11=blinking [21:20] Fan green 00=off 01=on 10=reserved 11=blinking [19:18] Temp amber 00=off 01=on 10=reserved 11=blinking [17:16] Temp green 00=off 01=on 10=reserved 11=blinking [15:14] Fabric amber 00=off 01=on 10=reserved 11=blinking [13:12] Fabric green 00=off 01=on 10=reserved 11=blinking [11:10] Control amber 00=off 01=on 10=reserved 11=blinking [9:8] Control green 00=off 01=on 10=reserved 11=blinking [7:6] OK2 amber 00=off 01=on 10=reserved 11=blinking [5:4] OK2 green 00=off 01=on 10=reserved 11=blinking [3:2] OK1 amber 00=off 01=on 10=reserved 11=blinking [1:0] OK1 green 00=off 01=on 10=reserved 11=blinking Falcon CMM: [11] Fan 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved Eagle CMM: [17:16] Fan 3 (rear) 00=amber 01=green 10=blink 11=reserved [15:14] Fan 2 (top right) 00=amber 01=green 10=blink 11=reserved [13:12] Fan 1 (top left) 00=amber 01=green 10=blink 11=reserved [11] Status 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved Hawk Stack: [19] fanGroup 1=Green (ok) 0=amber (fail) [18] internalPS 1=Green (ok) 0=amber (fail) [11] backupPS 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved NI: [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved FABRIC (Eagle Only): [7:6] OK2 Yellow LED 01=on 00=off 10=blink 11=reserved [5:4] OK2 Green LED 01=on 00=off 10=blink 11=reserved [3:2] OK1 Yellow LED 01=on 00=off 10=blink 11=reserved [1:0] OK1 Green LED 01=on 00=off 10=blink 11=reserved NOTE: Due to European regulation, the LEDs will NEVER be illuminated RED! They in fact will be either green OR amber." ::= { chasEntPhysicalEntry 3 } chasEntPhysPower OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the NI, PS and Control Modules. It corresponds to a a static value for the power consumption of an NI module or Control Module. This value is in Watts." ::= { chasEntPhysicalEntry 4 } chasEntPhysModuleType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the unique Module Type or ID from the entities eeprom. This value is guarrantteed to be unique to each type of Module. This value is only intended for Alcatel internal use." ::= { chasEntPhysicalEntry 5 } chasEntPhysMfgDate OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..11)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the manufacturing date of the entity. Its format is mmm dd yyyy : NOV 27 2001." ::= { chasEntPhysicalEntry 6 } chasEntPhysPartNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Alcatel Part Number for the entity. This value is used to identify what is needed when placing orders with Alcatel." ::= { chasEntPhysicalEntry 7 } chasEntPhysLedStatusOk1 OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED OK1 status indication" ::= { chasEntPhysicalEntry 8 } chasEntPhysLedStatusOk2 OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED OK2 status indication" ::= { chasEntPhysicalEntry 9 } chasEntPhysLedStatusPrimaryCMM OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED Primary chassis indication" ::= { chasEntPhysicalEntry 10 } chasEntPhysLedStatusSecondaryCMM OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED Secondary chassis indication" ::= { chasEntPhysicalEntry 11 } chasEntPhysLedStatusTemperature OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED temperature status indication" ::= { chasEntPhysicalEntry 12 } chasEntPhysLedStatusFan OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "For Hawk stacks used as a fan group status LED. For eagle CMM's user instead: Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)" ::= { chasEntPhysicalEntry 13 } chasEntPhysLedStatusFan1 OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis fan status, Eagle (top left), Fuji (top right)" ::= { chasEntPhysicalEntry 14 } chasEntPhysLedStatusFan2 OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis fan status, Eagle (top right), Fuji (middle right)" ::= { chasEntPhysicalEntry 15 } chasEntPhysLedStatusFan3 OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis fan status, Eagle (rear), Fuji (bottom right)" ::= { chasEntPhysicalEntry 16 } chasEntPhysLedStatusBackupPS OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis backup power supply status indication" ::= { chasEntPhysicalEntry 17 } chasEntPhysLedStatusInternalPS OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis internal power supply status indication" ::= { chasEntPhysicalEntry 18 } chasEntPhysLedStatusControl OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis control status" ::= { chasEntPhysicalEntry 19 } chasEntPhysLedStatusFabric OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) Fabric status indication" ::= { chasEntPhysicalEntry 20 } chasEntPhysLedStatusPSU OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Power Supply Unit status indication" ::= { chasEntPhysicalEntry 21 } chasEntPhysAsicRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the ASIC revision Number of the ni entity" ::= { chasEntPhysicalEntry 22 } chasEntPhysCpldRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the CPLD revision Number of the ni entity" ::= { chasEntPhysicalEntry 23 } chasEntPhysDefaultMinibootRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the default miniboot version Number of the ni entity" ::= { chasEntPhysicalEntry 24 } chasEntPhysBackUpMinibootRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the backup miniboot version Number of the ni entity" ::= { chasEntPhysicalEntry 25 } chasEntPhysBootromRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the bootrom version Number of the ni entity" ::= { chasEntPhysicalEntry 26 } chasEntPhysNiNum OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the NI. It indicates an NI associated with this physicalEntry" ::= { chasEntPhysicalEntry 27 } chasEntPhysGbicNum OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the NI. It indicates a gbic associated with this ni" ::= { chasEntPhysicalEntry 28 } chasEntPhysWaveLen OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the wave length of a SFP device" ::= { chasEntPhysicalEntry 29 } chasEntPhysUbootRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the uboot version Number of the ni entity" ::= { chasEntPhysicalEntry 30 } chasEntPhysUbootMinibootRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the uboot miniboot version Number of the ni entity" ::= { chasEntPhysicalEntry 31 } chasEntPhysMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the MAC address of the ni entity" ::= { chasEntPhysicalEntry 32 } chasEntPhysPoeSwVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the POE SW Revision of the ni entity" ::= { chasEntPhysicalEntry 33 } chasEntPhysC20LFailCont OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the C20L upgrade failure count of the ni entity" ::= { chasEntPhysicalEntry 34 } chasEntPhysCpuModel OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the model description of the cmm/ni cpu" ::= { chasEntPhysicalEntry 35 } chasEntPhysPowerType OBJECT-TYPE SYNTAX ChasEntPhysPowerType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type(AC/DC) of power supply." ::= { chasEntPhysicalEntry 36 } chasEntPhysPowerControlChecksum OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the power control checksum." ::= { chasEntPhysicalEntry 37 } -- CHASSIS SUPERVISION RFS TABLES chasSupervisionRfsLsTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionRfsLsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of file on the remote chassis per directory." ::= { alcatelIND1ChassisMIBObjects 4 } chasSupervisionRfsLsEntry OBJECT-TYPE SYNTAX ChasSupervisionRfsLsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a remote file. A row in this table contains a file per directory per chassis" INDEX { chasSupervisionRfsLsFileIndex } ::= { chasSupervisionRfsLsTable 1 } ChasSupervisionRfsLsEntry ::= SEQUENCE { chasSupervisionRfsLsFileIndex INTEGER, chasSupervisionRfsLsSlot Unsigned32, chasSupervisionRfsLsDirName DisplayString (SIZE (0..255)), chasSupervisionRfsLsFileName DisplayString (SIZE (0..33)), chasSupervisionRfsLsFileType INTEGER, chasSupervisionRfsLsFileSize Unsigned32, chasSupervisionRfsLsFileAttr INTEGER, chasSupervisionRfsLsFileDateTime DisplayString (SIZE (0..16)) } chasSupervisionRfsLsFileIndex OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This value holds file Index for the RFS LS table." ::= { chasSupervisionRfsLsEntry 1} chasSupervisionRfsLsSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Slot where remote file is located." ::= { chasSupervisionRfsLsEntry 2} chasSupervisionRfsLsDirName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote directory name where remote file is located in" DEFVAL { "/flash" } ::= { chasSupervisionRfsLsEntry 3 } chasSupervisionRfsLsFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..33)) MAX-ACCESS read-only STATUS current DESCRIPTION "The file name of remote file" DEFVAL { "" } ::= { chasSupervisionRfsLsEntry 4 } chasSupervisionRfsLsFileType OBJECT-TYPE SYNTAX INTEGER { file(1), directory(2), undefined(3), tarArchive(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of a remote file" DEFVAL { undefined } ::= { chasSupervisionRfsLsEntry 5 } chasSupervisionRfsLsFileSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "size of this remote file" DEFVAL { 0 } ::= { chasSupervisionRfsLsEntry 6 } chasSupervisionRfsLsFileAttr OBJECT-TYPE SYNTAX INTEGER { undefined(1), readOnly(2), readWrite(3), writeOnly(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "attributes of this remote file" DEFVAL { undefined } ::= { chasSupervisionRfsLsEntry 7 } chasSupervisionRfsLsFileDateTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "the modification date and time of a remote file" DEFVAL { "" } ::= { chasSupervisionRfsLsEntry 8 } chasSupervisionRfsDfTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionRfsDfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about file system size and use." ::= { alcatelIND1ChassisMIBObjects 8 } chasSupervisionRfsDfEntry OBJECT-TYPE SYNTAX ChasSupervisionRfsDfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information about file system size and use." INDEX { chasSupervisionRfsDfSlot } ::= { chasSupervisionRfsDfTable 1 } ChasSupervisionRfsDfEntry ::= SEQUENCE { chasSupervisionRfsDfSlot INTEGER, chasSupervisionRfsDfFlashFree Unsigned32, chasSupervisionRfsDfFlashSize Unsigned32 } chasSupervisionRfsDfSlot OBJECT-TYPE SYNTAX INTEGER { slot1Flash(1), slot2Flash(2), slot3Flash(3), slot4Flash(4), slot5Flash(5), slot6Flash(6), slot7Flash(7), slot8Flash(8), slot9Flash(9), slot10Flash(10), slot11Flash(11), slot12Flash(12), slot13Flash(13), slot14Flash(14), slot15Flash(15), slot16Flash(16), slot1Uflash(17), slot2Uflash(18), slot3Uflash(19), slot4Uflash(20), slot5Uflash(21), slot6Uflash(22), slot7Uflash(23), slot8Uflash(24), slot9Uflash(25), slot10Uflash(26), slot11Uflash(27), slot12Uflash(28), slot13Uflash(29), slot14Uflash(30), slot15Uflash(31), slot16Uflash(32) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "CMM Slot where flash space is evaluated. Slot index 1-16 will return slot 1-16 flash drive information. Slot index 17-32 will return slot 1-16 uflash drive information." ::= { chasSupervisionRfsDfEntry 1} chasSupervisionRfsDfFlashFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number bytes free on the file system." ::= { chasSupervisionRfsDfEntry 2} chasSupervisionRfsDfFlashSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total bytes on the file system." ::= { chasSupervisionRfsDfEntry 3} chasSupervisionFlashMemTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionFlashMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the systems flash memory information." ::= { alcatelIND1ChassisMIBObjects 9 } chasSupervisionFlashMemEntry OBJECT-TYPE SYNTAX ChasSupervisionFlashMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This contains one entry for the flash memory table." INDEX { chasSupervisionSlot } ::= { chasSupervisionFlashMemTable 1 } ChasSupervisionFlashMemEntry ::= SEQUENCE { chasSupervisionSlot INTEGER, chasSupervisionFlashSize Unsigned32, chasSupervisionFlashFree Unsigned32, chasSupervisionFlashUsed INTEGER } chasSupervisionSlot OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "CMM Slot where flash space is evaluated." ::= { chasSupervisionFlashMemEntry 1} chasSupervisionFlashSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Flash memory size." ::= { chasSupervisionFlashMemEntry 2} chasSupervisionFlashFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number bytes free on file system." ::= { chasSupervisionFlashMemEntry 3} chasSupervisionFlashUsed OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A rounded up percentage of Flash Memory used." ::= { chasSupervisionFlashMemEntry 4} chasSupervisionCmmCertifiedTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionCmmCertifiedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains..." ::= { alcatelIND1ChassisMIBObjects 10 } chasSupervisionCmmCertifiedEntry OBJECT-TYPE SYNTAX ChasSupervisionCmmCertifiedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about..." INDEX { chasSupervisionCmmNum } ::= { chasSupervisionCmmCertifiedTable 1 } ChasSupervisionCmmCertifiedEntry ::= SEQUENCE { chasSupervisionCmmNum INTEGER, chasSupervisionCmmCertifiedStatus INTEGER } chasSupervisionCmmNum OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "CMM Slot where /certified directory is evaluated." ::= { chasSupervisionCmmCertifiedEntry 1} chasSupervisionCmmCertifiedStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(0), yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the CMM certified directory - certified or not." ::= { chasSupervisionCmmCertifiedEntry 2} -- CHASSIS SUPERVISION FAN STATUS TABLE alaChasEntPhysFanTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaChasEntPhysFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per physical fan entity." ::= { alcatelIND1ChassisMIBObjects 11 } alaChasEntPhysFanEntry OBJECT-TYPE SYNTAX AlaChasEntPhysFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular fan in a chassis physical entity." INDEX { entPhysicalIndex, alaChasEntPhysFanLocalIndex } ::= { alaChasEntPhysFanTable 1 } AlaChasEntPhysFanEntry ::= SEQUENCE { alaChasEntPhysFanLocalIndex INTEGER, alaChasEntPhysFanStatus INTEGER } alaChasEntPhysFanLocalIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index to a chassis fan entity" ::={ alaChasEntPhysFanEntry 1 } alaChasEntPhysFanStatus OBJECT-TYPE SYNTAX INTEGER { noStatus(0), notRunning(1), running(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis fan operational status" ::={alaChasEntPhysFanEntry 2} -- CHASSIS SUPERVISION HASH CONTROL GLOBAL OBJECTS alaChasHashMode OBJECT-TYPE SYNTAX INTEGER { brief(1), extended(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to brief, Hash mode is enabled. When set to Extended, Hash mode is disabled." DEFVAL { extended } ::= { alcatelIND1ChassisMIBObjects 12 } alaChasUdpTcpPortMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The control is used to enable or disable UDP TCP port hashing. This option is applicable only when Hash mode is set to disabled (i.e. extended)" DEFVAL { disabled } ::= { alcatelIND1ChassisMIBObjects 13 } -- CHASSIS SUPERVISION NON UCAST HASH CONTROL GLOBAL OBJECTS alaChasNonUCHashControl OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This control is used to enable/disable Load balance for non unicast traffic." DEFVAL { disable } ::= { alcatelIND1ChassisMIBObjects 14 } -- CHASSIS SUPERVISION RFS COMMANDS alcatelIND1ChassisSupervisionRfsCommands OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision RFS commands. For rrm command the Slot, Command and SrcFileName are mandatory. For rcp command the Slot, Command, SrcFileName and DestFileName are mandatory. For rdf command the Slot and Command are mandatory" ::= { alcatelIND1ChassisMIBObjects 5 } chasSupervisionRfsCommandsSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Slot where RFS command should be executed." ::= { alcatelIND1ChassisSupervisionRfsCommands 1} chasSupervisionRfsCommandsCommand OBJECT-TYPE SYNTAX INTEGER { notSignificant(0), rrm(1), rcp(2), rls(3), rdf(4), reserved(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies which of the above Actions is to be performed. The commands are as follows: - rrm Remote file remove - rcp Remote file copy - rls Remote directory listing - rdf Remote flash disk space free" ::= { alcatelIND1ChassisSupervisionRfsCommands 2 } chasSupervisionRfsCommandsSrcFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The remote file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rrm or rcp." ::= { alcatelIND1ChassisSupervisionRfsCommands 3 } chasSupervisionRfsCommandsDestFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rcp." ::= { alcatelIND1ChassisSupervisionRfsCommands 4 } chasSupervisionRfsCommandsRlsDirName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The remote directory name where remote file is located in. This is used when command set to rls." DEFVAL { "/flash" } ::= { alcatelIND1ChassisSupervisionRfsCommands 5 } chasSupervisionRfsCommandsRlsFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..33)) MAX-ACCESS read-create STATUS current DESCRIPTION "The remote file name where remote file is located in. This is used when command set to rls." ::= { alcatelIND1ChassisSupervisionRfsCommands 6 } chasSupervisionRfsCommandsProcessingState OBJECT-TYPE SYNTAX INTEGER { inProgress(1), ready(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "command executing state for the previous set operation." ::= { alcatelIND1ChassisSupervisionRfsCommands 7 } chasSupervisionRfsCommandsStatusCode OBJECT-TYPE SYNTAX INTEGER { success(1), slotIsPrimary(2), slotNotExist(3), directoryNotExist(4), fileNotExist(5), maximumFilesExceed(6), noDiskSpace(7), systemBusy(8), systemError(9), directoryNotAllowToRemove(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "command completetion status error code." ::= { alcatelIND1ChassisSupervisionRfsCommands 8 } -- CHASSIS CONTROL RELOAD STATUS chasControlReloadStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasControlReloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing reload status of each network interface slot or stack module" ::= { alcatelIND1ChassisMIBObjects 6 } chasControlReloadEntry OBJECT-TYPE SYNTAX ChasControlReloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of a network interface reload status" INDEX { chasControlReloadIndex } ::={ chasControlReloadStatusTable 1 } ChasControlReloadEntry ::= SEQUENCE { chasControlReloadIndex INTEGER, chasControlReloadStatus INTEGER } chasControlReloadIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of a network interface reload status" ::= { chasControlReloadEntry 1 } chasControlReloadStatus OBJECT-TYPE SYNTAX INTEGER { reloadEnabled(1), reloadDisabled(2), noInterface(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the network interface module is enabled or disabled for reload." DEFVAL { reloadDisabled } ::= { chasControlReloadEntry 2 } -- CHASSIS GLOBAL CONTROL OBJECTS chasGlobalControl OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 7 } chasGlobalControlDelayedResetAll OBJECT-TYPE SYNTAX INTEGER (-1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to schedule a delayed reset all action. If set to -1 - cancel the timer, 0 - reset all immediately, any other value will start counting down the time until reset." DEFVAL { -1 } ::= { chasGlobalControl 1 } chasGlobalControlLongCommand OBJECT-TYPE SYNTAX INTEGER { none(1), certifySynchro(2), certifyNoSynchro(3), flashSynchro(4), restore(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to indicate whether a long-term action is in progress, and if so, what the action is." DEFVAL { none } ::= { chasGlobalControl 2 } chasGlobalControlLongCommandStatus OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), completeSuccess(3), completeFailure(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object it indicates the final disposition of the most recent long-term action." DEFVAL { none } ::= { chasGlobalControl 3 } -- --Chassis traps mib : chassisTraps -- --chassisTraps OBJECT IDENTIFIER ::= { notificationIND1Traps 4 } --Chassis traps definition chassisTrapsDesc OBJECT IDENTIFIER ::= { chassisTraps 1 } chassisTrapsObj OBJECT IDENTIFIER ::= { chassisTraps 2 } -- --textual conventions -- ChassisTrapsStrLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "enumerated value which provide the urgency level of the STR." SYNTAX INTEGER { strNotFatal (1), --recorverable strApplicationFatal (2), --not recorverable for the application strFatal (3) --not recorverable for the board } ChassisTrapsStrAppID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Application Identification number" SYNTAX INTEGER (0..255) ChassisTrapsStrSnapID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs." SYNTAX INTEGER (0..255) ChassisTrapsStrfileLineNb ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__." SYNTAX INTEGER (1..65535) ChassisTrapsStrErrorNb ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Fault identifier. The error number identifies the kind the detected fault and allows a mapping of the data contained in chassisTrapsdataInfo." SYNTAX INTEGER (0..65535) ChassisTrapsStrdataInfo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes." SYNTAX OCTET STRING (SIZE (0..63)) ChassisTrapsObjectType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value which provides the object type involved in the alert trap." SYNTAX INTEGER { chassis (1), ni (2), powerSuply (3), fan (4), cmm (5), fabric (6), gbic (7) } ChassisTrapsObjectNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number defining the order of the object in the set. EX: The number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. An instance of the appearance of the trap could be: failure on a module. Power supply 3. " SYNTAX INTEGER (0..255) ChassisTrapsAlertNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "this number identify the alert among all the possible chassis alert causes." SYNTAX INTEGER { runningWorking (1), -- The working version is used runningCertified (2), -- The certified version is used certifyStarted (3), -- CERTIFY process started certifyFlashSyncStarted (4), -- CERTIFY w/FLASH SYNCHRO process started certifyCompleted (5), -- CERTIFY process completed successfully certifyFailed (6), -- CERTIFY process failed synchroStarted (7), -- Flash Synchronization process started synchroCompleted (8), -- Flash Synchronization completed successfully synchroFailed (9), -- Flash Synchronization failed restoreStarted (10), -- RESTORE process started restoreCompleted (11), -- RESTORE process completed successfully restoreFailed (12), -- RESTORE process failed takeoverStarted (13), -- CMM take-over being processed takeoverDeferred (14), -- CMM take-over deferred takeoverCompleted (15), -- CMM take-over completed macAllocFailed (16), -- CMS MAC allocation failed macRangeFailed (17), -- CMS MAC range addition failed fanFailed (18), -- One or more of the fans is inoperable fanOk (19), -- Fan is operable fansOk (20), -- All fans are operable tempOverThreshold (21), -- CMM temperature over the threshold tempUnderThreshold (22), -- CMM temperature under the threshold tempOverDangerThreshold (23), -- CMM temperature over danger threshold powerMissing (24), -- Not enough power available psNotOperational (25), -- Power Supply is not operational psOperational (26), -- Power supply is operational psAllOperational (27), -- All power supplies are operational redundancyNotSupported (28), -- Hello protocol disabled, Redundancy not supported redundancyDisabledCertifyNeeded (29), -- Hello protocol disabled, Certify needed cmmStartingAsPrimary (30), -- CMM started as primary cmmStartingAsSecondary (31), -- CMM started as secondary cmmStartupCompleted (32), -- end of CMM start up cmmAPlugged (33), -- cmm a plugged cmmBPlugged (34), -- cmm b plugged cmmAUnPlugged (35), -- cmm a unplugged cmmBUnPlugged (36), -- cmm b unplugged lowNvramBattery (37), -- NV RAM battery is low notEnoughFabricsOperational (38), -- Not enough Fabric boards operational simplexNoSynchro (39), -- Only simplex CMM no flash synchro done secAutoActivate (40), -- secondary CMM autoactivating secAutoCertifyStarted (41), -- secondary CMM autocertifying secAutoCertifyCompleted (42), -- secondary CMM autocertify end secInactiveReset (43), -- cmm b unplugged activateScheduled (44), -- ACTIVATE process scheduled activateStarted (45), -- secondary CMM reset because of inactivity getAfileCompleted (46), -- Get A file process completed getAfileFailed (47), -- Failed to get a file from other CMM/Stack sysUpdateStart (48), -- sysUpdate starts sysUpdateInProgress (49), -- sysUpdate in progress sysUpdateError (50), -- sysUpdate error sysUpdateEnd (51), -- sysUpdate ends reloadInProgress (52), -- the system is already in reload workign process c20UpgradeOk (53), -- the c20 license upgrade ok c20UpgradeFailed (54), -- the c20 license upgrade failed c20RestoreOk (55), -- the c20 license restore ok c20RestoreFailed (56), -- the c20 license restore failed c20NiFailed (57) -- the c20 ni board reports failure } -- --object i.e. trap description -- chassisTrapsStr NOTIFICATION-TYPE OBJECTS { chassisTrapsStrLevel , chassisTrapsStrAppID , chassisTrapsStrSnapID , chassisTrapsStrfileName , chassisTrapsStrfileLineNb , chassisTrapsStrErrorNb , chassisTrapsStrcomments , chassisTrapsStrdataInfo } STATUS current DESCRIPTION "A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to aware the user of for maintenance purpose. " ::= { chassisTrapsDesc 0 1 } chassisTrapsAlert NOTIFICATION-TYPE OBJECTS { physicalIndex , chassisTrapsObjectType , chassisTrapsObjectNumber , chassisTrapsAlertNumber , chassisTrapsAlertDescr } STATUS current DESCRIPTION "generic trap notifying something changed in the chassis whatever it's a failure or not " ::= { chassisTrapsDesc 0 2 } chassisTrapsStateChange NOTIFICATION-TYPE OBJECTS { physicalIndex , chassisTrapsObjectType , chassisTrapsObjectNumber , chasEntPhysOperStatus } STATUS current DESCRIPTION "A status change was detected" ::= { chassisTrapsDesc 0 3 } -- -- objects used in the traps. -- chassisTrapsStrLevel OBJECT-TYPE SYNTAX ChassisTrapsStrLevel MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value which provides the urgency level of the STR." ::= {chassisTrapsObj 1} chassisTrapsStrAppID OBJECT-TYPE SYNTAX ChassisTrapsStrAppID MAX-ACCESS read-only STATUS current DESCRIPTION "Application Identification number" ::= {chassisTrapsObj 2} chassisTrapsStrSnapID OBJECT-TYPE SYNTAX ChassisTrapsStrSnapID MAX-ACCESS read-only STATUS current DESCRIPTION "Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs." ::= {chassisTrapsObj 3} chassisTrapsStrfileName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the source file where the fault was detected. This is given by the C ANSI macro __FILE__. The path shouldn't appear." ::= {chassisTrapsObj 4} chassisTrapsStrfileLineNb OBJECT-TYPE SYNTAX ChassisTrapsStrfileLineNb MAX-ACCESS read-only STATUS current DESCRIPTION "Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__." ::= {chassisTrapsObj 5} chassisTrapsStrErrorNb OBJECT-TYPE SYNTAX ChassisTrapsStrErrorNb MAX-ACCESS read-only STATUS current DESCRIPTION "Fault identificator. The error number identify the kind the detected fault and allow a mapping of the data contained in chassisTrapsdataInfo." ::= {chassisTrapsObj 6} chassisTrapsStrcomments OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "comment text explaning the fault." ::= {chassisTrapsObj 7} chassisTrapsStrdataInfo OBJECT-TYPE SYNTAX ChassisTrapsStrdataInfo MAX-ACCESS read-only STATUS current DESCRIPTION "Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes." ::= {chassisTrapsObj 8} chassisTrapsObjectType OBJECT-TYPE SYNTAX ChassisTrapsObjectType MAX-ACCESS read-only STATUS current DESCRIPTION "enumerated value which provide the object type involved in the alert trap." ::= {chassisTrapsObj 9} chassisTrapsObjectNumber OBJECT-TYPE SYNTAX ChassisTrapsObjectNumber MAX-ACCESS read-only STATUS current DESCRIPTION "number defining the order of the object in the set. EX: number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. A instance of the appearance of the trap could be: failure on a module. Power supply 3. " ::= {chassisTrapsObj 10} chassisTrapsAlertNumber OBJECT-TYPE SYNTAX ChassisTrapsAlertNumber MAX-ACCESS read-only STATUS current DESCRIPTION "this number identify the alert among all the possible chassis alert causes." ::= {chassisTrapsObj 11} chassisTrapsAlertDescr OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "description of the alert matching chassisTrapsAlertNumber" ::= {chassisTrapsObj 12} physicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Physical index of the involved object." ::= { chassisTrapsObj 13 } -- END Trap Objects -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- COMPLIANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1ChassisMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Chassis Supervision." MODULE MANDATORY-GROUPS { chasControlModuleGroup , chasControlRedundantGroup , chasChassisGroup , chasControlReloadStatusGroup , chasGlobalControlGroup , chassisNotificationGroup , alaChasEntPhysFanGroup , alaChasHashControlGroup } ::= { alcatelIND1ChassisMIBCompliances 1 } alcatelIND1ChassisPhysMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Chassis Supervision Physical." MODULE MANDATORY-GROUPS { chasEntPhysicalGroup , chassisPhysNotificationGroup } ::= { alcatelIND1ChassisPhysMIBCompliances 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- UNITS OF CONFORMANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx chasControlModuleGroup OBJECT-GROUP OBJECTS { chasControlRunningVersion , chasControlActivateTimeout , chasControlVersionMngt , chasControlDelayedActivateTimer } STATUS current DESCRIPTION "Chassis Supervision Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 1 } chasControlRedundantGroup OBJECT-GROUP OBJECTS { chasControlNumberOfTakeover , chasControlDelayedRebootTimer } STATUS current DESCRIPTION "Chassis Supervision Redundant Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 2 } chasChassisGroup OBJECT-GROUP OBJECTS { chasFreeSlots , chasPowerLeft , chasNumberOfResets , chasHardwareBoardTemp , chasHardwareCpuTemp , chasTempRange , chasTempThreshold , chasDangerTempThreshold , chasPrimaryPhysicalIndex } STATUS current DESCRIPTION "Chassis Supervision Chassis Group." ::= { alcatelIND1ChassisMIBGroups 3 } chasControlReloadStatusGroup OBJECT-GROUP OBJECTS { chasControlReloadStatus } STATUS current DESCRIPTION "Chassis Supervision NI Reload Status Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 4 } chasGlobalControlGroup OBJECT-GROUP OBJECTS { chasGlobalControlDelayedResetAll, chasGlobalControlLongCommand, chasGlobalControlLongCommandStatus } STATUS current DESCRIPTION "Chassis Supervision Global Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 5 } chassisNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { chassisTrapsStr , chassisTrapsAlert } STATUS current DESCRIPTION "Chassis Supervision Notification Group." ::= { alcatelIND1ChassisMIBGroups 6 } alaChasEntPhysFanGroup OBJECT-GROUP OBJECTS { alaChasEntPhysFanStatus } STATUS current DESCRIPTION "Chassis Supervision Physical Fan Group." ::= { alcatelIND1ChassisMIBGroups 7 } alaChasHashControlGroup OBJECT-GROUP OBJECTS { alaChasHashMode, alaChasUdpTcpPortMode } STATUS current DESCRIPTION "Chassis Supervision Hash Control Group." ::= { alcatelIND1ChassisMIBGroups 8 } chasEntPhysicalGroup OBJECT-GROUP OBJECTS { chasEntPhysAdminStatus , chasEntPhysOperStatus , chasEntPhysLedStatus , chasEntPhysPower , chasEntPhysModuleType , chasEntPhysMfgDate , chasEntPhysPartNumber , chasEntPhysLedStatusOk1 , chasEntPhysLedStatusOk2 , chasEntPhysLedStatusPrimaryCMM , chasEntPhysLedStatusSecondaryCMM , chasEntPhysLedStatusTemperature , chasEntPhysLedStatusFan , chasEntPhysLedStatusFan1 , chasEntPhysLedStatusFan2 , chasEntPhysLedStatusFan3 , chasEntPhysLedStatusBackupPS , chasEntPhysLedStatusInternalPS , chasEntPhysLedStatusControl , chasEntPhysLedStatusFabric , chasEntPhysLedStatusPSU , chasEntPhysPowerType , chasEntPhysPowerControlChecksum } STATUS current DESCRIPTION "Chassis (inclosure) Entity Physical Group." ::= { alcatelIND1ChassisPhysMIBGroups 1 } chassisPhysNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { chassisTrapsStr , chassisTrapsAlert , chassisTrapsStateChange } STATUS current DESCRIPTION "Chassis Supervision Physical Notification Group." ::= { alcatelIND1ChassisPhysMIBGroups 2 } END