ALCATEL-IND1-CONFIG-MGR-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF softentIND1Confmgr FROM ALCATEL-IND1-BASE ; alcatelIND1ConfigMgrMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Manager Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { softentIND1Confmgr 1} alcatelIND1ConfigMgrMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Configuration Manager Subsystem Managed Objects." ::= { alcatelIND1ConfigMgrMIB 1 } alcatelIND1ConfigMgrMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Configuration Manager Subsystem Conformance Information." ::= { alcatelIND1ConfigMgrMIB 2 } alcatelIND1ConfigMgrMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Configuration Manager Subsystem Units Of Conformance." ::= { alcatelIND1ConfigMgrMIBConformance 1 } alcatelIND1ConfigMgrMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Configuration Manager Subsystem Compliance Statements." ::= { alcatelIND1ConfigMgrMIBConformance 2 } -- -- Configuration Manager -- configManager OBJECT IDENTIFIER ::= { alcatelIND1ConfigMgrMIBObjects 1 } configFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the configuration file to be read by the device. The file specified should be present on the device." DEFVAL { "" } ::= { configManager 1 } configFileAction OBJECT-TYPE SYNTAX INTEGER { none(1), checkSyntaxOnly(2), apply(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Triggers application of the configuration file specified by the configInputFileName. A value of checkSyntax causes configInputFile to be checked for syntax, with no changes to device configuration. A value of checkSyntaxAndApply causes the configInputFile to be applied to the device configuration.A value of none indicates no action has been triggered." DEFVAL { none } ::= { configManager 2 } configErrorFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the file containing the error messages generated by the device during file configuration." DEFVAL { "" } ::= { configManager 3 } configFileStatus OBJECT-TYPE SYNTAX INTEGER { noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of most recent application of configuration file to the device." DEFVAL { noneAvail } ::= { configManager 4 } configFileMode OBJECT-TYPE SYNTAX INTEGER { none(1), verbose(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The verbose mode displays all configuration commands and errors when the file is applied on the console screen. Ignored unless set from command line interface." DEFVAL { none } ::= { configManager 5 } configTimerFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the configuration file to be read later by the device." DEFVAL { "" } ::= { configManager 6 } configTimerFileTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The local time when the configuration file will be read by the device. This object is only set if the configInputFile must be applied at a later time. The following formats are valid: MM/DD/YYYY hh:mm MM/DD/YY hh:mm MM/DD hh:mm - uses current year if after current date and time, next year otherwise. hh:mm - uses today's date if later than current time, tommorow's date otherwise. where YY - year (0-38,99) MM - month (1-12) DD - day (1-31) hh - hour (0-23) mm - minute (0-59)" DEFVAL { "" } ::= { configManager 7 } configTimerFileStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), pending(2), inProgress(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the ASCII configuration timer." DEFVAL { idle } ::= { configManager 8 } configTimerClear OBJECT-TYPE SYNTAX INTEGER (1..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes the ASCII configuration timer to be cleared." DEFVAL { 1 } ::= { configManager 9 } configSnapshotFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the configuration snap-shot file to be generated by the device." DEFVAL { "" } ::= { configManager 10 } configSnapshotAction OBJECT-TYPE SYNTAX INTEGER (1..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes the configuration snap-shot to be generated by the device." DEFVAL { 1 } ::= { configManager 11 } configSnapshotAllSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes all application configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 12 } configSnapshotVlanSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes Vlan configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 13 } configSnapshotSpanningTreeSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes Spanning Tree configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 14 } configSnapshotQOSSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes QOS configuration data to be included in the snap-shot file generated by the the device." DEFVAL { 0 } ::= { configManager 15 } configSnapshotIPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes IP configuration data to be included in the snap-shot file generated by the the device." DEFVAL { 0 } ::= { configManager 16 } configSnapshotIPXSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes IPX configuration data to be included in the snap-shot file generated by the the device." DEFVAL { 0 } ::= { configManager 17 } configSnapshotIPMSSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes IPMS configuration data to be included in the snap-shot file generated by the the device." DEFVAL { 0 } ::= { configManager 18 } configSnapshotAAASelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes AAA configuration data to be included in the snap-shot file generated by the the device." DEFVAL { 0 } ::= { configManager 19 } configSnapshotSNMPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes SNMP configuration data to be included in the snap-shot file generated by the the device." DEFVAL { 0 } ::= { configManager 20 } configSnapshot8021QSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes 802.1Q configuration data to be included in the snap-shot file generated by the the device." DEFVAL { 0 } ::= { configManager 21 } configSnapshotLinkAggregateSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes link aggregation configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 22 } configSnapshotPortMirrorSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes port mirroring configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 23 } configSnapshotXIPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes proprietary inter-switch protocol configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 24 } configSnapshotHealthMonitorSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes health monitoring configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 25 } configSnapshotBootPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes bootp configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 26 } configSnapshotBridgeSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes source-learning configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 27 } configSnapshotChassisSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes the chassis configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 28 } configSnapshotInterfaceSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes ethernet interface configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 29 } configSnapshotPolicySelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes policy manager configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 30 } configSnapshotSessionSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes the user-session configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 31 } configSnapshotServerLoadBalanceSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes server load balancing configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 32 } configSnapshotSystemServiceSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes system services configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 33 } configSnapshotVRRPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes VRRP configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 34 } configSnapshotWebSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes web manager configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 35 } configSnapshotRIPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes RIP configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 36 } configSnapshotOSPFSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes OSPF configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 37 } configSnapshotBGPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes BGP configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 38 } configSnapshotIPRMSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes IPRM routing configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 39 } configSnapshotIPMRSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes IP multicast routing configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 40 } configSnapshotModuleSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes module configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 41 } configTechSupportLogAction OBJECT-TYPE SYNTAX INTEGER { notSiginificant(0), techSupportBasic(1), techSupportL2(2), techSupportL3(3), techSupportL3Rip(4), techSupportL3Ipx(5), techSupportL3Ospf(6), techSupportL3Bgp(7), techSupportL3Pimsm(8), techSupportL3Mroute(9), techSupportL3Dvmrp(10), techSupportL3IPv6(11), techSupportL3RIPng(12), techSupportL3OSPF3(13), techSupportL3Isis(14), techSupportL3Pim6(15), techSupportL3IPsec(16), techSupportL3Bfd(17) } MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes a tech_support.log file to be created containing switch information useful to a technical support group." DEFVAL { 1 } ::= { configManager 42 } configWriteMemory OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes the entire switch snap-shot configuration to be stored in the boot.cfg file in the working directory." DEFVAL { 0 } ::= { configManager 43 } configErrorFileMaximum OBJECT-TYPE SYNTAX INTEGER (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of error files which may be present on a switch. Each time a new error file is created, all but the newest configErrorFileMaxNum error files are deleted." DEFVAL { 1 } ::= { configManager 44 } configChangeStatus OBJECT-TYPE SYNTAX INTEGER { identical(1), different(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the running configuration with respect to the saved configuration." DEFVAL { identical } ::= { configManager 45 } configSnapshotRDPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes RDP configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 46 } configSnapshotIPv6Select OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes IPv6 configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 47 } configSnapshotRIPngSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes RIPng configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 48 } configSnapshotAtmSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes ATM configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED." DEFVAL { 0 } ::= { configManager 49 } configSnapshotSonetSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes Sonet configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED." DEFVAL { 0 } ::= { configManager 50 } configSnapshotNTPSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes NTP configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 51 } configSnapshotPortMappingSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes Port Mapping configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 52 } configSnapshotOSPF3Select OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes OSPF3 configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 53 } configWriteMemoryStatus OBJECT-TYPE SYNTAX INTEGER { noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of most recent wwrite memory action." DEFVAL { noneAvail } ::= { configManager 54 } configSnapshotStackSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes STack Manager configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 55 } configSnapshotISISSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes ISIS configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 56 } configSnapshotEOAMSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes Ethernet OAM configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 57 } configSnapshotUDLDSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes UDLD configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 58 } configSnapshotNETSECSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes NETSEC configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 59 } configSnapshotIPsecSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes IP Security configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 60 } configSnapshotBFDSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes BFD configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 61 } configSnapshotErpSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes ERP configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 62 } configSnapshotMPLSSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes MPLS configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 63 } configSnapshotEFMOAMSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes EFMOAM configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 64 } configSnapshotLBDSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes Loop Back Detection configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 65 } configSnapshotSAASelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes SAA configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 66 } configSnapshotDhcpSrvSelect OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "A set of this object causes DHCP Server configuration data to be included in the snap-shot file generated by the device." DEFVAL { 0 } ::= { configManager 67 } -- -- Compliance Statements -- alcatelIND1ConfigMgrMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Configuration Manager Subsystem." MODULE -- this module MANDATORY-GROUPS { configFileGroup, configTimerFileGroup, configSnapshotGroup, configTechSupportLogGroup, configWriteMemoryGroup } ::= { alcatelIND1ConfigMgrMIBCompliances 1 } -- -- Units of Conformance -- configFileGroup OBJECT-GROUP OBJECTS { configFileName, configFileAction, configErrorFileName, configFileStatus, configFileMode, configErrorFileMaximum, configChangeStatus } STATUS current DESCRIPTION "Collection of objects for file configuration." ::= { alcatelIND1ConfigMgrMIBGroups 1} configTimerFileGroup OBJECT-GROUP OBJECTS { configTimerFileName, configTimerFileTime, configTimerFileStatus, configTimerClear } STATUS current DESCRIPTION "Collection of objects for timer file configuration." ::= { alcatelIND1ConfigMgrMIBGroups 2} configSnapshotGroup OBJECT-GROUP OBJECTS { configSnapshotAllSelect, configSnapshotVlanSelect, configSnapshotSpanningTreeSelect, configSnapshotQOSSelect, configSnapshotIPSelect, configSnapshotIPXSelect, configSnapshotIPMSSelect, configSnapshotAAASelect, configSnapshotSNMPSelect, configSnapshot8021QSelect, configSnapshotLinkAggregateSelect, configSnapshotPortMirrorSelect, configSnapshotXIPSelect, configSnapshotHealthMonitorSelect, configSnapshotBootPSelect, configSnapshotBridgeSelect, configSnapshotChassisSelect, configSnapshotInterfaceSelect, configSnapshotPolicySelect, configSnapshotSessionSelect, configSnapshotServerLoadBalanceSelect, configSnapshotSystemServiceSelect, configSnapshotVRRPSelect, configSnapshotWebSelect, configSnapshotRIPSelect, configSnapshotOSPFSelect, configSnapshotBGPSelect, configSnapshotIPRMSelect, configSnapshotIPMRSelect, configSnapshotModuleSelect, configSnapshotRDPSelect, configSnapshotIPv6Select, configSnapshotOSPF3Select, configSnapshotStackSelect, configWriteMemoryStatus, configSnapshotISISSelect, configSnapshotEOAMSelect, configSnapshotUDLDSelect, configSnapshotNETSECSelect, configSnapshotIPsecSelect, configSnapshotBFDSelect, configSnapshotErpSelect, configSnapshotEFMOAMSelect, configSnapshotLBDSelect, configSnapshotSAASelect } STATUS current DESCRIPTION "Collection of objects for snapshot configuration." ::= { alcatelIND1ConfigMgrMIBGroups 3} configTechSupportLogGroup OBJECT-GROUP OBJECTS { configTechSupportLogAction } STATUS current DESCRIPTION "Collection of objects for technical support log file." ::= { alcatelIND1ConfigMgrMIBGroups 4} configWriteMemoryGroup OBJECT-GROUP OBJECTS { configWriteMemory } STATUS current DESCRIPTION "Collection of objects for write memory." ::= { alcatelIND1ConfigMgrMIBGroups 5} END