ALCATEL-IND1-DOT3-OAM-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, Integer32, Counter32, NOTIFICATION-TYPE FROM SNMPv2-SMI OBJECT-GROUP,MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString, RowStatus FROM SNMPv2-TC ifIndex FROM IF-MIB dot3OamEntry, dot3OamLoopbackEntry, dot3OamEventLogTimestamp, dot3OamEventLogOui, dot3OamEventLogType, dot3OamEventLogLocation, dot3OamEventLogWindowHi, dot3OamEventLogWindowLo, dot3OamEventLogThresholdHi, dot3OamEventLogThresholdLo, dot3OamEventLogValue, dot3OamEventLogRunningTotal, dot3OamEventLogEventTotal, dot3OamStatsEntry FROM DOT3-OAM-MIB softentIND1Dot3Oam FROM ALCATEL-IND1-BASE; alcatelIND1Dot3OamMIB MODULE-IDENTITY LAST-UPDATED "200902250000Z" -- 02/25/2009 00:00GMT ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel Internetworking, Incorporated (Division 1, Formerly XYLAN Corporation) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://www.ind.alcatel.com File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Ethernet in First Mile OAM. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE" REVISION "200902250000Z" DESCRIPTION "Ethernet in First Mile (EFM) module for managing IEEE 802.3ah. This 802.3ah (EFM) OAM MIB extends standard 802.3ah. The set of objects defined in this MIB, do not duplicate, nor conflict with any MIB object definitions defined in the RFC 4878 MIB (dot3-oam-mib.mib)." ::= { softentIND1Dot3Oam 1} -- -------------------------------------------------------------- -- -- Extension to - Dot3-OAM-MIB -- Sections of the Ethernet OAM MIB -- alcatelIND1Dot3OamNotifications OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for 802.3ah OAM Notifications." ::= { alcatelIND1Dot3OamMIB 0 } alcatelIND1Dot3OamMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For 802.3ah OAM Objects." ::= { alcatelIND1Dot3OamMIB 1 } alcatelIND1Dot3OamMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for 802.3ah Module MIB Subsystem Conformance Information." ::= { alcatelIND1Dot3OamMIB 2 } alcatelIND1Dot3OamMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for 802.3ah Module MIB Subsystem Units of Conformance." ::= { alcatelIND1Dot3OamMIBConformance 1 } alcatelIND1Dot3OamMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for 802.3ah Module MIB Subsystem Compliance Statements." ::= { alcatelIND1Dot3OamMIBConformance 2 } -------------------------------------------------------------- alaDot3OamStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status requested by management for 802.3ah. The value enabled(1) indicates that 802.3ah should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), 802.3ah is disabled on all ports and all 802.3ah packets will be dropped. A transition from disabled(2) to enabled(1) will cause a reset of all 802.3ah state machines on all ports." DEFVAL { disabled } ::= { alcatelIND1Dot3OamMIBObjects 1 } alaDot3OamGlobalClearStats OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear statistics control for Dot3OAM. The value reset (1) indicates that clear all statistic counters related to all ports in the system. By default, this object contains a zero value." DEFVAL { default } ::= { alcatelIND1Dot3OamMIBObjects 2 } alaDot3OamGlobalClearEventLogs OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear event logs control for Dot3OAM. The value reset (1) indicates that clear all event logs related to all ports in the system. By default, this object contains a zero value." DEFVAL { default } ::= { alcatelIND1Dot3OamMIBObjects 3 } alaDot3OamGlobalClearVariableTransactions OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear variable transactions control for Dot3OAM. The value reset (1) indicates that clear all transactions related to all ports in the system. By default, this object contains a zero value." DEFVAL { default } ::= { alcatelIND1Dot3OamMIBObjects 4 } alaDot3OamMultiplePduCount OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the number of PDUs that will be sent, when OAM needs to send multiple event notification PDUs. " DEFVAL { 3 } ::= { alcatelIND1Dot3OamMIBObjects 5 } -- *************************************************************** -- DESCRIPTION: -- "Port configuration information -- data for the 802.3ah Module. -- Implementation of this group is mandantory" alaDot3OamPortConfig OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 8 } alaDot3OamTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDot3OamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the primary controls and status for the OAM capabilities of an Ethernet like interface. There will be one row in this table for each Ethernet like interface in the system that supports the OAM functions defined in [802.3ah]. " ::= { alaDot3OamPortConfig 1 } alaDot3OamEntry OBJECT-TYPE SYNTAX AlaDot3OamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information on the Ethernet OAM function for a single Ethernet like interface. Entries in the table are created automatically for each interface supporting Ethernet OAM. The status of the row entry can be determined from dot3OamOperStatus. A alaDot3OamEntry is indexed in the alaDot3OamTable by the ifIndex object of the Interfaces MIB. " AUGMENTS { dot3OamEntry } ::= { alaDot3OamTable 1 } AlaDot3OamEntry ::= SEQUENCE { alaDot3OamKeepAliveInterval Integer32, alaDot3OamHelloInterval Integer32, alaDot3OamNextTransactionId Integer32 } alaDot3OamKeepAliveInterval OBJECT-TYPE SYNTAX Integer32 (5..120) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the timer in seconds to restart the discovery process if no PDUs are received in this time frame. " DEFVAL { 5 } ::= { alaDot3OamEntry 1 } alaDot3OamHelloInterval OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the interval between two OAMPDUs " DEFVAL { 1 } ::= { alaDot3OamEntry 2 } alaDot3OamNextTransactionId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to fetch the next available transaction id required for MIB variable retrieval requests on this interface. To read the remote entity's MIB variables, a unique transaction id is generated for each request. The administrator first needs to get the next available transaction id for the interface, and provide this as index to the alaDot3OamRetrieveRequestTable. " ::= { alaDot3OamEntry 3 } -- *************************************************************** -- DESCRIPTION: -- "Port loopback information -- for the 802.3ah Module. -- Implementation of this group is mandantory" alaDot3OamPortLoopbackControl OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 9 } alaDot3OamLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDot3OamLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains controls for the loopback state of the local link as well as indicating the status of the loopback function. There is one entry in this table for each entry in dot3OamTable that supports loopback functionality (where dot3OamFunctionsSupported includes the loopbackSupport bit set). " ::= { alaDot3OamPortLoopbackControl 1 } alaDot3OamLoopbackEntry OBJECT-TYPE SYNTAX AlaDot3OamLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information on the L1 ping. One record/entry shall be maintained per interface. This record shall be automatically created when L1 ping is initiated for the first time on the interface. Subsequent ping operations shall replace the record. Loopback capabilities of the interface can be determined from the dot3OamLoopbackStatus object. " AUGMENTS { dot3OamLoopbackEntry } ::= { alaDot3OamLoopbackTable 1 } AlaDot3OamLoopbackEntry ::= SEQUENCE { alaDot3OamPortL1PingFramesConf Integer32, alaDot3OamPortL1PingFramesDelay Integer32, alaDot3OamPortL1PingStatus INTEGER, alaDot3OamPortL1PingFramesSent Counter32, alaDot3OamPortL1PingFramesReceived Counter32, alaDot3OamPortL1PingAverageRoundTripDelay Integer32 } alaDot3OamPortL1PingFramesConf OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the number of frames to be transmitted from the interface during L1 ping. " DEFVAL { 5 } ::= { alaDot3OamLoopbackEntry 1 } alaDot3OamPortL1PingFramesDelay OBJECT-TYPE SYNTAX Integer32 (100..1000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the delay between two frames transmitted during L1 ping. " DEFVAL { 1000 } ::= { alaDot3OamLoopbackEntry 2 } alaDot3OamPortL1PingStatus OBJECT-TYPE SYNTAX INTEGER { default(0), start(1), running(2), operationSuccessful(3), operationUnsuccessful(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to start the L1 ping operation. Operator can set only start(1) value and setting of start(1) value is not valid if object value is start(1) or running(2). Whenever efm gets enabled on any port, this object has default(0) value. Default(0) value implies that loopback session has not been started even for a single time. Running(2) is corresponding to the state, when L1 ping is going on, operationSuccessful(3) is corresponding to the state, when L1 ping operation is done successfully. operationUnsuccessful(4) is corresponding to state when operation gets failed due to some reason. " ::= { alaDot3OamLoopbackEntry 3 } alaDot3OamPortL1PingFramesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to keep the actual frames sent during last L1 ping operation. " ::= { alaDot3OamLoopbackEntry 4 } alaDot3OamPortL1PingFramesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to keep the number of frames received during last L1 ping operation. " ::= { alaDot3OamLoopbackEntry 5 } alaDot3OamPortL1PingAverageRoundTripDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to keep the average delay taken by frames during last L1 ping. " ::= { alaDot3OamLoopbackEntry 6 } -- *************************************************************** -- DESCRIPTION: -- "Port statistics information -- for the 802.3ah Module. -- Implementation of this group is mandantory" alaDot3OamPortStats OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 10 } alaDot3OamStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDot3OamStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics for the OAM function on a particular Ethernet like interface. There is an entry in the table for every entry in the dot3OamStatsTable. The counters in this table are defined as 32-bit entries to match the counter size as defined in [802.3ah]. Given the OA protocol is a slow protocol, the counters increment at a slow rate. " ::= { alaDot3OamPortStats 1 } alaDot3OamStatsEntry OBJECT-TYPE SYNTAX AlaDot3OamStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics information on the Ethernet OAM function for a single Ethernet like interface. Entries are automatically created for every entry in the dot3OamStatsTable. Counters are maintained across transitions in dot3OamOperStatus. " AUGMENTS { dot3OamStatsEntry } ::= { alaDot3OamStatsTable 1 } AlaDot3OamStatsEntry ::= SEQUENCE { alaDot3OamPortClearStats INTEGER } alaDot3OamPortClearStats OBJECT-TYPE SYNTAX INTEGER { default (0), reset (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all statistics parameters corresponding to this port By default, this objects contains a zero value. " DEFVAL { default } ::= { alaDot3OamStatsEntry 1 } -- *************************************************************** -- DESCRIPTION: -- "Port event logs information -- for the 802.3ah Module. -- Implementation of this group is mandantory" alaDot3OamPortEventLogs OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 11 } alaDot3OamEventLogTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDot3OamEventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in locally generated OAMPDUs, and remotely detected events, which are detected by the OAM peer entity and signaled to the local entity via Ethernet OAM. Ethernet OAM events can be signaled by Event Notification OAMPDUs or by the flags field in any OAMPDU. " ::= { alaDot3OamPortEventLogs 1 } alaDot3OamEventLogEntry OBJECT-TYPE SYNTAX AlaDot3OamEventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dot3OamEventLogTable. Entries are automatically created whenever Ethernet OAM events occur at the local OAM entity, and when Event Notification OAMPDUs are received at the local OAM entity (indicating events have occurred at the peer OAM entity). The size of the table is implementation dependent, but when the table becomes full, older events are automatically deleted to make room for newer events. The table index dot3OamEventLogIndex increments for each new entry, and when the maximum value is reached the value restarts at zero. " INDEX { ifIndex } ::= { alaDot3OamEventLogTable 1 } AlaDot3OamEventLogEntry ::= SEQUENCE { alaDot3OamPortClearEventLogs INTEGER } alaDot3OamPortClearEventLogs OBJECT-TYPE SYNTAX INTEGER { default (0), reset (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all event logs corresponding to this port By default, this objects contains a zero value. " DEFVAL { default } ::= { alaDot3OamEventLogEntry 1 } -- ------------------------------------------------------------- -- ETHERNET OAM MIB RETRIEVAL Request Table -- ------------------------------------------------------------- -- DESCRIPTION: -- "MIB Retrieval requests -- for the 802.3ah Module. -- Implementation of this group is mandantory" alaDot3OamRetrieveRequest OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 12 } alaDot3OamRetrieveRequestTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDot3OamRetrieveRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing MIB variable retrieval request information" ::= { alaDot3OamRetrieveRequest 1 } alaDot3OamRetrieveRequestEntry OBJECT-TYPE SYNTAX AlaDot3OamRetrieveRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 802.3ah MIB variable retrieval request entry." INDEX { ifIndex, alaDot3OamTransactionId, alaDot3OamVariableRequestBranch, alaDot3OamVariableRequestLeaf } ::= { alaDot3OamRetrieveRequestTable 1 } AlaDot3OamRetrieveRequestEntry ::= SEQUENCE { alaDot3OamTransactionId Integer32, alaDot3OamVariableRequestBranch INTEGER, alaDot3OamVariableRequestLeaf Integer32, alaDot3OamVariableRequestRetrieveStatus INTEGER, alaDot3OamVariableRequestRowStatus RowStatus, alaDot3OamPortClearVariableTransactions INTEGER } alaDot3OamTransactionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to set the available transaction id for retrieving the remote MIB variable for this interface. The value for this is obtained from alaDot3OamNextTransactionId, which is part of alaDot3OamTable. " ::= { alaDot3OamRetrieveRequestEntry 1 } alaDot3OamVariableRequestBranch OBJECT-TYPE SYNTAX INTEGER { object(3), package(4), attribute(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to set the branch to reference the MIB object to be retrieved. This is set to attribute, package or object depending upon the request for getting the MIB variables. " DEFVAL { attribute } ::= { alaDot3OamRetrieveRequestEntry 2 } alaDot3OamVariableRequestLeaf OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to set the leaf to reference the MIB object to be retrieved. " ::= { alaDot3OamRetrieveRequestEntry 3 } alaDot3OamVariableRequestRetrieveStatus OBJECT-TYPE SYNTAX INTEGER { active(1), failed(2), success(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to check the status of a MIB request, Active means that the request is currently in progress), failed means that the request has failed, and success means that the request returned successfully. " ::= { alaDot3OamRetrieveRequestEntry 4 } alaDot3OamVariableRequestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for initiating a MIB retrieval request. " ::= { alaDot3OamRetrieveRequestEntry 5 } alaDot3OamPortClearVariableTransactions OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reset all variable transactions corresponding to this port By default, this objects contains a zero value. " DEFVAL { default } ::= { alaDot3OamRetrieveRequestEntry 6 } -- ------------------------------------------------------------- -- ETHERNET OAM MIB RETRIEVAL Response Table -- ------------------------------------------------------------- -- DESCRIPTION: -- "MIB Retrieval response -- for the 802.3ah Module. -- Implementation of this group is mandantory" alaDot3OamRetrieveResponse OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 13 } alaDot3OamRetrieveResponseTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDot3OamRetrieveResponseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing MIB variable retrieval response information" ::= { alaDot3OamRetrieveResponse 1 } alaDot3OamRetrieveResponseEntry OBJECT-TYPE SYNTAX AlaDot3OamRetrieveResponseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 802.3ah MIB variable retrieval response entry." INDEX { ifIndex, alaDot3OamTransactionId, alaDot3OamVariableResponseBranch, alaDot3OamVariableResponseLeaf } ::= { alaDot3OamRetrieveResponseTable 1 } AlaDot3OamRetrieveResponseEntry ::= SEQUENCE { alaDot3OamVariableResponseBranch INTEGER, alaDot3OamVariableResponseLeaf Integer32, alaDot3OamVariableResponseValue DisplayString } alaDot3OamVariableResponseBranch OBJECT-TYPE SYNTAX INTEGER { object(3), package(4), attribute(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The branch to reference the MIB object retrieved. " ::= { alaDot3OamRetrieveResponseEntry 1 } alaDot3OamVariableResponseLeaf OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The leaf to reference the MIB object retrieved. " ::= { alaDot3OamRetrieveResponseEntry 2 } alaDot3OamVariableResponseValue OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the retrived attribute. " ::= { alaDot3OamRetrieveResponseEntry 3 } -- ------------------------------------------------------------- -- 802.3ah Event Notification -- ------------------------------------------------------------- alaDot3OamThresholdEventClear NOTIFICATION-TYPE OBJECTS { dot3OamEventLogTimestamp, dot3OamEventLogOui, dot3OamEventLogType, dot3OamEventLogLocation, dot3OamEventLogWindowHi, dot3OamEventLogWindowLo, dot3OamEventLogThresholdHi, dot3OamEventLogThresholdLo, dot3OamEventLogValue, dot3OamEventLogRunningTotal, dot3OamEventLogEventTotal } STATUS current DESCRIPTION "A alaDot3OamThresholdEventClear notification is sent when a local or remote threshold crossing event is recovered. The OAM entity can be derived from extracting the ifIndex from the variable bindings. The objects in the notification correspond to the values in a row instance in the dot3OamEventLogTable." ::= { alcatelIND1Dot3OamNotifications 1 } alaDot3OamNonThresholdEventClear NOTIFICATION-TYPE OBJECTS { dot3OamEventLogTimestamp, dot3OamEventLogOui, dot3OamEventLogType, dot3OamEventLogLocation, dot3OamEventLogEventTotal } STATUS current DESCRIPTION "A alaDot3OamNonThresholdEventClear notification is sent when a local or remote non-threshold crossing event is recovered. The OAM entity can be derived from extracting the ifIndex from the variable bindings. The objects in the notification correspond to the values in a row instance of the dot3OamEventLogTable." ::= { alcatelIND1Dot3OamNotifications 2 } -- ------------------------------------------------------------- -- COMPLIANCE -- ------------------------------------------------------------- alcatelIND1Dot3OamMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for 802.3ah." MODULE MANDATORY-GROUPS { alaDot3OamBaseGroup, alaDot3OamPortConfigGroup, alaDot3OamPortLoopbackControlGroup, alaDot3OamPortStatsGroup, alaDot3OamPortEventLogsGroup, alaDot3OamRetrieveRequestGroup, alaDot3OamRetrieveResponseGroup, alaDot3OamNotificationGroup } ::= { alcatelIND1Dot3OamMIBCompliances 1 } -- ------------------------------------------------------------- -- UNITS OF CONFORMANCE -- ------------------------------------------------------------- alaDot3OamBaseGroup OBJECT-GROUP OBJECTS { alaDot3OamStatus, alaDot3OamGlobalClearStats, alaDot3OamGlobalClearEventLogs, alaDot3OamGlobalClearVariableTransactions, alaDot3OamMultiplePduCount } STATUS current DESCRIPTION "Collection of objects for management of 802.3ah Base Group." ::= { alcatelIND1Dot3OamMIBGroups 1 } alaDot3OamPortConfigGroup OBJECT-GROUP OBJECTS { alaDot3OamKeepAliveInterval, alaDot3OamHelloInterval, alaDot3OamNextTransactionId } STATUS current DESCRIPTION "Collection of objects for management of 802.3ah Port Configuration Table." ::= { alcatelIND1Dot3OamMIBGroups 2 } alaDot3OamPortLoopbackControlGroup OBJECT-GROUP OBJECTS { alaDot3OamPortL1PingFramesConf, alaDot3OamPortL1PingFramesDelay, alaDot3OamPortL1PingStatus, alaDot3OamPortL1PingFramesSent, alaDot3OamPortL1PingFramesReceived, alaDot3OamPortL1PingAverageRoundTripDelay } STATUS current DESCRIPTION "Collection of objects for management of 802.3ah Loopback Table." ::= { alcatelIND1Dot3OamMIBGroups 3 } alaDot3OamPortStatsGroup OBJECT-GROUP OBJECTS { alaDot3OamPortClearStats } STATUS current DESCRIPTION "Collection of objects for management of 802.3ah Statistics Table." ::= { alcatelIND1Dot3OamMIBGroups 4 } alaDot3OamPortEventLogsGroup OBJECT-GROUP OBJECTS { alaDot3OamPortClearEventLogs } STATUS current DESCRIPTION "Collection of objects for management of 802.3ah Event Log Table." ::= { alcatelIND1Dot3OamMIBGroups 5 } alaDot3OamRetrieveRequestGroup OBJECT-GROUP OBJECTS { alaDot3OamVariableRequestRetrieveStatus, alaDot3OamVariableRequestRowStatus, alaDot3OamPortClearVariableTransactions } STATUS current DESCRIPTION "Collection of objects for management of 802.3ah Retrieve Request Table." ::= { alcatelIND1Dot3OamMIBGroups 6 } alaDot3OamRetrieveResponseGroup OBJECT-GROUP OBJECTS { alaDot3OamVariableResponseValue } STATUS current DESCRIPTION "Collection of objects for management of 802.3ah Retrieve Response Table." ::= { alcatelIND1Dot3OamMIBGroups 7 } alaDot3OamNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { alaDot3OamThresholdEventClear, alaDot3OamNonThresholdEventClear } STATUS current DESCRIPTION "A collection of notifications used by 802.3ah to signal to a management entity that local or remote events have recovered on a specified Ethernet link. " ::= { alcatelIND1Dot3OamMIBGroups 8 } END