ALCATEL-IND1-DRCTM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF routingIND1Tm FROM ALCATEL-IND1-BASE; alcatelIND1DrcTmMIB MODULE-IDENTITY LAST-UPDATED "200705241500Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of the Task Manager's global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { routingIND1Tm 1 } alcatelIND1DrcTmMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIB 1 } alaDrcTmConfig OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 1 } alaDrcTmDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 2 } alaDrcTmRipDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 3 } alaDrcTmOspfDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 4 } alaDrcTmBgpDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 5 } alaDrcTmDvmrpDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 6 } alaDrcTmPimDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 7 } alaDrcTmRipngDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 8 } alaDrcTmIprmDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 9 } alaDrcTmIpmrmDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 10 } alaDrcTmOspf3Debug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 11 } alaDrcTmLogDestination OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 12 } alaDrcTmIsisDebug OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 13 } alaDrcTmIPRouterPrimaryAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Primary IP Address of this Router." ::= {alaDrcTmConfig 1 } alaDrcTmIPRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Router-id for this Router." ::= {alaDrcTmConfig 2 } alaDrcTmIPRipStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of RIP on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 3 } alaDrcTmIPOspfStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of OSPF on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 4 } alaDrcTmIPBgpStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of BGP on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 5 } alaDrcTmIPDvmrpStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of DVMRP on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 6 } alaDrcTmIPPimStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of PIM on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 7 } alaDrcTmIPMsdpStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of MSDP on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 8 } alaDrcTmIPRipngStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of Ripng on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 9 } alaDrcTmIPOspf3Status OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of OSPFv3 on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 10 } alaDrcTmIPIsisStatus OBJECT-TYPE SYNTAX INTEGER { loaded(1), notloaded(2), loading(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the load status of ISIS on this router. Loaded(1) is the only valid Set value." DEFVAL { notloaded } ::= {alaDrcTmConfig 11 } -- ************************************************************************ -- DRC log Configuration -- ************************************************************************ alaDrcTmLogToSysFacility OBJECT-TYPE SYNTAX INTEGER { printf(1), session(2), swLog(3), sysTrace(4), sysLog(5), truncBuffer(6), ringBuffer(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Logs the DRC log messages to one of the System's Facility" DEFVAL { printf } ::= {alaDrcTmLogDestination 1} alaDrcTmLogToSessionId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Session Id of Switch's telnet/ssh session where DRC log messages shall be logged. Default is console." DEFVAL { 0 } ::= {alaDrcTmLogDestination 2 } alaDrcTmLogBufferSize OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Size of the Buffer in Kbytes where DRC log messages shall be logged." DEFVAL { 100 } ::= {alaDrcTmLogDestination 3 } alaDrcTmLogBufferDumpfile OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0..32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "Redirect/Dump Log Buffer to the specified File. If filename is left null, Buffer is dumped to Console." ::= {alaDrcTmLogDestination 4 } alaDrcTmLogCriticalBufferDumpfile OBJECT-TYPE SYNTAX DisplayString ( SIZE( 0..32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "Redirect/Dump Critical Ring Buffer to the specified File. If filename is left null, Buffer is dumped to Console." ::= {alaDrcTmLogDestination 5 } alaDrcTmLogShowTask OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables/disables showing of Task Names in DRC log messages." DEFVAL { enable } ::= {alaDrcTmLogDestination 6 } alaDrcTmLogShowFunction OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables/disables showing of Function Names in DRC log messages." DEFVAL { enable } ::= {alaDrcTmLogDestination 7 } alaDrcTmLogShowLine OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables/disables showing of Line Numbers in DRC log messages." DEFVAL { disable } ::= {alaDrcTmLogDestination 8 } alaDrcTmLogShowDate OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables/disables showing of Date in TimeStamp of DRC log messages." DEFVAL { disable } ::= {alaDrcTmLogDestination 9 } alaDrcTmLogShowTime OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "enables/disables showing of Seconds in TimeStamp of DRC log messages." DEFVAL { disable } ::= {alaDrcTmLogDestination 10 } alaDrcTmLogClearBuffer OBJECT-TYPE SYNTAX INTEGER { buffer (1), criticalbuffer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "clears the buffer/critical buffer contents" DEFVAL { buffer } ::= {alaDrcTmLogDestination 11 } -- ************************************************************************ -- DRC TM Debug Configuration -- ************************************************************************ alaDrcTmDebugLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Sets the level of Debugging for the DRC TM on this router. A level of 0 indicates no debugging. This object is currently not used" DEFVAL { 0 } ::= {alaDrcTmDebug 1} alaDrcTmDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for DRC TM Error messages" DEFVAL { 1 } ::= {alaDrcTmDebug 2} alaDrcTmDebugUnusedA OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for UnusedA messages" DEFVAL { 0 } ::= {alaDrcTmDebug 3} alaDrcTmDebugTaskInfo OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for DRC TM Task Info messages" DEFVAL { 0 } ::= {alaDrcTmDebug 4} alaDrcTmDebugEvents OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for DRC TM Event messages" DEFVAL { 0 } ::= {alaDrcTmDebug 5} alaDrcTmDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for DRC TM MIP processing (including CLI/SNMP)" DEFVAL { 0 } ::= {alaDrcTmDebug 6} alaDrcTmDebugUnusedB OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for UnusedB messages" DEFVAL { 0 } ::= {alaDrcTmDebug 7} alaDrcTmDebugMisc OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for Misc DRC TM messages" DEFVAL { 0 } ::= {alaDrcTmDebug 8} alaDrcTmDebugUnused1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for Unused1 messages" DEFVAL { 0 } ::= {alaDrcTmDebug 9} alaDrcTmDebugUnused2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for Unused2 messages" DEFVAL { 0 } ::= {alaDrcTmDebug 10} alaDrcTmDebugUnused3 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for Unused3 messages" DEFVAL { 0 } ::= {alaDrcTmDebug 11} alaDrcTmDebugUnused4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for Unused4 messages" DEFVAL { 0 } ::= {alaDrcTmDebug 12} alaDrcTmDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the debug level for debugging of all DRC TM messages" DEFVAL { 0 } ::= {alaDrcTmDebug 13} -- ************************************************************************ -- DRC TM OSPF Debug Configuration -- ************************************************************************ alaDrcTmOspfDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 1} alaDrcTmOspfDebugWarning OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF Warning Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 2} alaDrcTmOspfDebugState OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF-State Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 3} alaDrcTmOspfDebugRecv OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the Packets received by OSPF on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 4} alaDrcTmOspfDebugSend OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the Packets sent by OSPF from this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 5} alaDrcTmOspfDebugFlood OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the flooding of LSAs in OSPF on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 6} alaDrcTmOspfDebugSPF OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's SPF calculations on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 7} alaDrcTmOspfDebugLsdb OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's LSDB-related operations on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 8} alaDrcTmOspfDebugRdb OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's RDB-relate operation on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 9} alaDrcTmOspfDebugAge OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's Aging process of LSA's on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 10} alaDrcTmOspfDebugVlink OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's virtual linkoperations on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 11} alaDrcTmOspfDebugRedist OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's route redistribution process on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 12} alaDrcTmOspfDebugSummary OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's all summarizations on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 13} alaDrcTmOspfDebugDbexch OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's Neighbors' database exchange on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 14} alaDrcTmOspfDebugHello OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's hello handshaking process on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 15} alaDrcTmOspfDebugAuth OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's authentication process on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 16} alaDrcTmOspfDebugArea OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's area events on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 17} alaDrcTmOspfDebugIntf OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's interface operations on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 18} alaDrcTmOspfDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the MIP processing of OSPF's specific commands on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 19} alaDrcTmOspfDebugInfo OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's Information on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 20} alaDrcTmOspfDebugSetup OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's Initialization setup on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 21} alaDrcTmOspfDebugTime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's Time related events on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 22} alaDrcTmOspfDebugTm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the OSPF's Task Manager communication events this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 23} alaDrcTmOspfDebugRestart OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for debugging of OSPF Graceful Restart events and information." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 24} alaDrcTmOspfDebugHelper OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for debugging of OSPF Graceful Restart Helper mode events and information." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 25} alaDrcTmOspfDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of OSPF debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspfDebug 26} -- ************************************************************************ -- DRC TM BGP Debug Configuration -- ************************************************************************ alaDrcTmBgpDebugDamp OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Damp Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 1} alaDrcTmBgpDebugFsm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP FSM Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 2} alaDrcTmBgpDebugRecvUpd OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP route update messages received from the neighbor. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 3} alaDrcTmBgpDebugSendUpd OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP route update messages sent to the neighbor. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 4} alaDrcTmBgpDebugOpen OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Open messages exchanged with the neighbor. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 5} alaDrcTmBgpDebugKeepAlive OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP KeepAlive messages exchanged with the neighbor. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 6} alaDrcTmBgpDebugNotify OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Notify Messages exchanged with the neighbor. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 7} alaDrcTmBgpDebugPolicy OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP policy Messages exchanged with the neighbor. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 8} alaDrcTmBgpDebugRoute OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Route messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 9} alaDrcTmBgpDebugSync OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Synchronization messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 10} alaDrcTmBgpDebugAggr OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Aggregation related messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 11} alaDrcTmBgpDebugTcp OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP tcp connection messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 12} alaDrcTmBgpDebugWarnings OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Warning messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 13} alaDrcTmBgpDebugErrors OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Error messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 14} alaDrcTmBgpDebugRedist OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Redistribute messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 15} alaDrcTmBgpDebugPeer OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP peer messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 16} alaDrcTmBgpDebugLocal OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP local messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 17} alaDrcTmBgpDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP MIP messages (including CLI/SNMP) on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 18} alaDrcTmBgpDebugTm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP and Task Manager Interaction messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 19} alaDrcTmBgpDebugInfo OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Information messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 20} alaDrcTmBgpDebugRestart OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP Graceful Restart messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 21} alaDrcTmBgpDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of BGP debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 22} alaDrcTmBgpDebugPeer6 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the BGP IPv6 Peer messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 23} alaDrcTmBgpDebugRoute6 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for BGP IPv6 route messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmBgpDebug 24} -- ************************************************************************ -- DRC TM RIP Debug Configuration -- ************************************************************************ alaDrcTmRipDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the RIP Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 1} alaDrcTmRipDebugWarning OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the RIP Warning Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 2} alaDrcTmRipDebugRecv OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the Packets received by RIP on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 3} alaDrcTmRipDebugSend OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the Packets sent by RIP from this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 4} alaDrcTmRipDebugRdb OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIP's Routing Database on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 5} alaDrcTmRipDebugAge OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIP's Aging messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 6} alaDrcTmRipDebugConfig OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIP's Configuration messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 7} alaDrcTmRipDebugRedist OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIP's route redistribution messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 8} alaDrcTmRipDebugInfo OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIP's Information on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 9} alaDrcTmRipDebugSetup OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIP's Initialization setup on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 10} alaDrcTmRipDebugTime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIP's Time related events on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 11} alaDrcTmRipDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of RIP debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipDebug 12} -- ************************************************************************ -- DRC TM IPMRM Debug Configuration -- ************************************************************************ alaDrcTmIpmrmDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the IPMRM Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 1 } ::= {alaDrcTmIpmrmDebug 1} alaDrcTmIpmrmDebugFib OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM FIB processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 2} alaDrcTmIpmrmDebugAging OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM's Aging messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 3} alaDrcTmIpmrmDebugProtos OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM's protos processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 4} alaDrcTmIpmrmDebugIpms OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM/IPMS processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 5} alaDrcTmIpmrmDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 6} alaDrcTmIpmrmDebugInit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM's Initialization setup on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 7} alaDrcTmIpmrmDebugTm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM and Task managerinteraction on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 8} alaDrcTmIpmrmDebugMisc OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPMRM's Miscellaneous messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 9} alaDrcTmIpmrmDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of IPMRM debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIpmrmDebug 10} -- ************************************************************************ -- DRC TM IPRM Debug Configuration -- ************************************************************************ alaDrcTmIprmDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the IPRM Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 1 } ::= {alaDrcTmIprmDebug 1} alaDrcTmIprmDebugAccesslist OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM AccessList handling on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 2} alaDrcTmIprmDebugIntf OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM Interface handling on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 3} alaDrcTmIprmDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the IPRM's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 4} alaDrcTmIprmDebugMisc OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for Miscellaneous IPRM issues. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 5} alaDrcTmIprmDebugNhs OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's NextHopSync handling on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 6} alaDrcTmIprmDebugPrefix OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's Prefix registration code on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 7} alaDrcTmIprmDebugRedist OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's Redistribution code this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 8} alaDrcTmIprmDebugRoute4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's handling of IPv4 routes on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 9} alaDrcTmIprmDebugRoute6 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's handling of IPv6 routes on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 10} alaDrcTmIprmDebugRoutemap OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's RouteMap handling on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 11} alaDrcTmIprmDebugRoutepref OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's RoutePreference code on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 12} alaDrcTmIprmDebugStatic OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's Static route handling on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 13} alaDrcTmIprmDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of IPRM debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 14} alaDrcTmIprmDebugBfd OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for IPRM's BFD support on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIprmDebug 15} -- ************************************************************************ -- DRC TM RIPNG Debug Configuration -- ************************************************************************ alaDrcTmRipngDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the RIPng Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 1 } ::= {alaDrcTmRipngDebug 1} alaDrcTmRipngDebugWarning OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the RIPng Warning Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 2} alaDrcTmRipngDebugRecv OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the Packets received by RIPng on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 3} alaDrcTmRipngDebugSend OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the Packets sent by RIPng from this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 4} alaDrcTmRipngDebugRdb OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Routing Database on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 5} alaDrcTmRipngDebugAge OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Aging messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 6} alaDrcTmRipngDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's MIP messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 7} alaDrcTmRipngDebugInfo OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Information on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 8} alaDrcTmRipngDebugSetup OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Initialization setup on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 9} alaDrcTmRipngDebugTime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Timer related events on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 10} alaDrcTmRipngDebugTm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng/Task Manager Interaction messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 11} alaDrcTmRipngDebugRouteFilter OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Route Filter messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 12} alaDrcTmRipngDebugNexthopFilter OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Nexthop Filter messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 13} alaDrcTmRipngDebugSummary OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the RIPng's Summarization messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 14} alaDrcTmRipngDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of RIPng debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 15} alaDrcTmRipngDebugRedist OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for RIPng redistribution messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmRipngDebug 16} -- ************************************************************************ -- DRC TM PIM Debug Configuration -- ************************************************************************ -- ************************************************************************ -- DRC TM PIMSM & PIMDM Debug Configuration -- ************************************************************************ alaDrcTmPimDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the PIM Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 1 } ::= {alaDrcTmPimDebug 1} alaDrcTmPimDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIM's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 2} alaDrcTmPimDebugInit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIM's Initialization setup on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 3} alaDrcTmPimDebugBootstrap OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for PIMSM bootstrap messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 4} alaDrcTmPimDebugCRP OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for PIMSM CRP processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 5} alaDrcTmPimDebugTime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM's Timer related events on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 6} alaDrcTmPimDebugSpt OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM's SPT related events on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 7} alaDrcTmPimDebugSmNbr OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the PIMSM Neighbor processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 8} alaDrcTmPimDebugSmHello OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the PIMSM Hello Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 9} alaDrcTmPimDebugSmRoute OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM's Route Processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 10} alaDrcTmPimDebugSmJoinPrune OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM Join/Prune processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 11} alaDrcTmPimDebugSmAssert OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM's Assert processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 12} alaDrcTmPimDebugSmIgmp OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM Igmp processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 13} alaDrcTmPimDebugSmIpmrm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM IPMRM Interaction on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 14} alaDrcTmPimDebugSmMisc OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMSM's Miscellaneous processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 15} alaDrcTmPimDebugDmNbr OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the PIMDM Neighbor processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 16} alaDrcTmPimDebugDmHello OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the PIMDM Hello Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 17} alaDrcTmPimDebugDmRoute OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM's Route Processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 18} alaDrcTmPimDebugDmJoinPrune OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM Join/Prune processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 19} alaDrcTmPimDebugDmAssert OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM's Assert processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 20} alaDrcTmPimDebugDmIgmp OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM Igmp processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 21} alaDrcTmPimDebugDmIpmrm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM IPMRM Interaction on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 22} alaDrcTmPimDebugDmMisc OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM's Miscellaneous processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 23} alaDrcTmPimDebugGraft OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM's Graft processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 24} alaDrcTmPimDebugStateRefresh OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the PIMDM's State Refresh Processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 25} alaDrcTmPimDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of PIM debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmPimDebug 26} -- ************************************************************************ -- DRC TM DVMRP Debug Configuration -- ************************************************************************ alaDrcTmDvmrpDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the DVMRP Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 1 } ::= {alaDrcTmDvmrpDebug 1} alaDrcTmDvmrpDebugNbr OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the DVMRP Neighbor processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 2} alaDrcTmDvmrpDebugRoutes OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for DVMRP Route messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 3} alaDrcTmDvmrpDebugProbes OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for DVMRP Probes processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 4} alaDrcTmDvmrpDebugPrunes OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP Prunes Processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 5} alaDrcTmDvmrpDebugGrafts OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP Grafts processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 6} alaDrcTmDvmrpDebugTime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP's Timer related events on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 7} alaDrcTmDvmrpDebugIgmp OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP Igmp processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 8} alaDrcTmDvmrpDebugFlash OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP's flash processing on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 9} alaDrcTmDvmrpDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 10} alaDrcTmDvmrpDebugInit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP's Initialization setup on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 11} alaDrcTmDvmrpDebugTm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP Task Manager Interaction on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 12} alaDrcTmDvmrpDebugIpmrm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP IPMRM Interaction on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 13} alaDrcTmDvmrpDebugMisc OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debug messages for the DVMRP's Miscellaneous on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 14} alaDrcTmDvmrpDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of DVMRP debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmDvmrpDebug 15} -- ************************************************************************ -- DRC TM OSPF3 Debug Configuration -- ************************************************************************ alaDrcTmOspf3DebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 1 } ::= {alaDrcTmOspf3Debug 1} alaDrcTmOspf3DebugInfo OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Info Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 2} alaDrcTmOspf3DebugIntf OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Interface Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 3} alaDrcTmOspf3DebugRecv OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Recv Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 4} alaDrcTmOspf3DebugSend OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Send Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 5} alaDrcTmOspf3DebugNbr OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Nbr Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 6} alaDrcTmOspf3DebugState OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 State Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 7} alaDrcTmOspf3DebugArea OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Area Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 8} alaDrcTmOspf3DebugLsa OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Lsa Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 9} alaDrcTmOspf3DebugFlood OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Flood Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 10} alaDrcTmOspf3DebugSpf OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Spf Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 11} alaDrcTmOspf3DebugRdb OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Rdb Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 12} alaDrcTmOspf3DebugVlink OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Vlink Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 13} alaDrcTmOspf3DebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the OSPF3 Mip Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 14} alaDrcTmOspf3DebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for all types of OSPF3 debug messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmOspf3Debug 15} -- ************************************************************************ -- DRC TM ISIS Debug Configuration -- ************************************************************************ alaDrcTmIsisDebugError OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Error Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 1} alaDrcTmIsisDebugWarn OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Warning Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 2} alaDrcTmIsisDebugPkt OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Packet Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 3} alaDrcTmIsisDebugAdj OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Adjacency Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 4} alaDrcTmIsisDebugCkt OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Circuit Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 5} alaDrcTmIsisDebugSpf OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Spf Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 6} alaDrcTmIsisDebugLsp OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Lsp Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 7} alaDrcTmIsisDebugFlood OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Flood Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 8} alaDrcTmIsisDebugIntf OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Interface Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 9} alaDrcTmIsisDebugIprm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Iprm Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 10} alaDrcTmIsisDebugMip OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Mip Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 11} alaDrcTmIsisDebugMsg OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 12} alaDrcTmIsisDebugLeak OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Leak Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 13} alaDrcTmIsisDebugSummary OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Summary Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 14} alaDrcTmIsisDebugRestart OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the ISIS Restart Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 15} alaDrcTmIsisDebugAll OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the level of Debugging for the All ISIS Messages on this router. A level of 0 indicates no debugging." DEFVAL { 0 } ::= {alaDrcTmIsisDebug 16} -- conformance information alcatelIND1DrcTmMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIB 2 } alcatelIND1DrcTmMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBConformance 1 } alcatelIND1DrcTmMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBConformance 2 } -- compliance statements alaDrcTmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers running DRC Task Manager (TM) and implementing the ALCATEL-IND1-DRCTM MIB." MODULE -- this module MANDATORY-GROUPS { alaDrcTmConfigMIBGroup, alaDrcTmDebugMIBGroup, alaDrcTmRipDebugMIBGroup, alaDrcTmOspfDebugMIBGroup, alaDrcTmBgpDebugMIBGroup, alaDrcTmDvmrpDebugMIBGroup, alaDrcTmPimDebugMIBGroup, alaDrcTmRipngDebugMIBGroup, alaDrcTmIprmDebugMIBGroup, alaDrcTmIpmrmDebugMIBGroup, alaDrcTmOspf3DebugMIBGroup, alaDrcTmLogDestination, alaDrcTmIsisDebugMIBGroup } ::= { alcatelIND1DrcTmMIBCompliances 1 } -- units of conformance alaDrcTmConfigMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmIPRouterPrimaryAddress, alaDrcTmIPRouterId, alaDrcTmIPRipStatus, alaDrcTmIPOspfStatus, alaDrcTmIPBgpStatus, alaDrcTmIPDvmrpStatus, alaDrcTmIPPimStatus, alaDrcTmIPMsdpStatus, alaDrcTmIPRipngStatus, alaDrcTmIPOspf3Status, alaDrcTmIPIsisStatus } STATUS current DESCRIPTION "A collection of objects to support management of DRC Task Manager." ::= { alcatelIND1DrcTmMIBGroups 1 } alaDrcTmDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmDebugError, alaDrcTmDebugTaskInfo, alaDrcTmDebugEvents, alaDrcTmDebugMip, alaDrcTmDebugMisc, alaDrcTmDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of DRC TM." ::= { alcatelIND1DrcTmMIBGroups 2 } alaDrcTmRipDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmRipDebugError, alaDrcTmRipDebugWarning, alaDrcTmRipDebugRecv, alaDrcTmRipDebugSend, alaDrcTmRipDebugRdb, alaDrcTmRipDebugAge, alaDrcTmRipDebugConfig, alaDrcTmRipDebugRedist, alaDrcTmRipDebugInfo, alaDrcTmRipDebugSetup, alaDrcTmRipDebugTime, alaDrcTmRipDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of RIP DRC TM." ::= { alcatelIND1DrcTmMIBGroups 3 } alaDrcTmOspfDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmOspfDebugError, alaDrcTmOspfDebugWarning, alaDrcTmOspfDebugState, alaDrcTmOspfDebugRecv, alaDrcTmOspfDebugSend, alaDrcTmOspfDebugFlood, alaDrcTmOspfDebugSPF, alaDrcTmOspfDebugLsdb, alaDrcTmOspfDebugRdb, alaDrcTmOspfDebugAge, alaDrcTmOspfDebugVlink, alaDrcTmOspfDebugRedist, alaDrcTmOspfDebugSummary, alaDrcTmOspfDebugDbexch, alaDrcTmOspfDebugHello, alaDrcTmOspfDebugAuth, alaDrcTmOspfDebugArea, alaDrcTmOspfDebugIntf, alaDrcTmOspfDebugMip, alaDrcTmOspfDebugInfo, alaDrcTmOspfDebugSetup, alaDrcTmOspfDebugTime, alaDrcTmOspfDebugTm, alaDrcTmOspfDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of OSPF DRC TM." ::= { alcatelIND1DrcTmMIBGroups 4 } alaDrcTmBgpDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmBgpDebugDamp, alaDrcTmBgpDebugFsm, alaDrcTmBgpDebugRecvUpd, alaDrcTmBgpDebugSendUpd, alaDrcTmBgpDebugOpen, alaDrcTmBgpDebugKeepAlive, alaDrcTmBgpDebugNotify, alaDrcTmBgpDebugPolicy, alaDrcTmBgpDebugRoute, alaDrcTmBgpDebugSync, alaDrcTmBgpDebugAggr, alaDrcTmBgpDebugTcp, alaDrcTmBgpDebugWarnings, alaDrcTmBgpDebugErrors, alaDrcTmBgpDebugRedist, alaDrcTmBgpDebugPeer, alaDrcTmBgpDebugLocal, alaDrcTmBgpDebugMip, alaDrcTmBgpDebugTm, alaDrcTmBgpDebugInfo, alaDrcTmBgpDebugRestart, alaDrcTmBgpDebugAll, alaDrcTmBgpDebugPeer6, alaDrcTmBgpDebugRoute6 } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of BGP DRC TM." ::= { alcatelIND1DrcTmMIBGroups 5 } alaDrcTmDvmrpDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmDvmrpDebugError, alaDrcTmDvmrpDebugNbr, alaDrcTmDvmrpDebugRoutes, alaDrcTmDvmrpDebugProbes, alaDrcTmDvmrpDebugPrunes, alaDrcTmDvmrpDebugGrafts, alaDrcTmDvmrpDebugTime, alaDrcTmDvmrpDebugIgmp, alaDrcTmDvmrpDebugFlash, alaDrcTmDvmrpDebugMip, alaDrcTmDvmrpDebugInit, alaDrcTmDvmrpDebugTm, alaDrcTmDvmrpDebugIpmrm, alaDrcTmDvmrpDebugMisc, alaDrcTmDvmrpDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of DVMRP DRC TM." ::= { alcatelIND1DrcTmMIBGroups 6 } alaDrcTmPimDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmPimDebugError, alaDrcTmPimDebugMip, alaDrcTmPimDebugInit, alaDrcTmPimDebugBootstrap, alaDrcTmPimDebugCRP, alaDrcTmPimDebugTime, alaDrcTmPimDebugSpt, alaDrcTmPimDebugSmNbr, alaDrcTmPimDebugSmHello, alaDrcTmPimDebugSmRoute, alaDrcTmPimDebugSmJoinPrune, alaDrcTmPimDebugSmAssert, alaDrcTmPimDebugSmIgmp, alaDrcTmPimDebugSmIpmrm, alaDrcTmPimDebugSmMisc, alaDrcTmPimDebugDmNbr, alaDrcTmPimDebugDmHello, alaDrcTmPimDebugDmRoute, alaDrcTmPimDebugDmJoinPrune, alaDrcTmPimDebugDmAssert, alaDrcTmPimDebugDmIgmp, alaDrcTmPimDebugDmIpmrm, alaDrcTmPimDebugDmMisc, alaDrcTmPimDebugGraft, alaDrcTmPimDebugStateRefresh, alaDrcTmPimDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of PIM DRC TM." ::= { alcatelIND1DrcTmMIBGroups 7 } alaDrcTmRipngDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmRipngDebugError, alaDrcTmRipngDebugWarning, alaDrcTmRipngDebugRecv, alaDrcTmRipngDebugSend, alaDrcTmRipngDebugRdb, alaDrcTmRipngDebugAge, alaDrcTmRipngDebugMip, alaDrcTmRipngDebugInfo, alaDrcTmRipngDebugSetup, alaDrcTmRipngDebugTime, alaDrcTmRipngDebugTm, alaDrcTmRipngDebugRouteFilter, alaDrcTmRipngDebugNexthopFilter, alaDrcTmRipngDebugSummary, alaDrcTmRipngDebugAll, alaDrcTmRipngDebugRedist } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of RIPNG DRC TM." ::= { alcatelIND1DrcTmMIBGroups 8 } alaDrcTmIprmDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmIprmDebugError, alaDrcTmIprmDebugAccesslist, alaDrcTmIprmDebugIntf, alaDrcTmIprmDebugMip, alaDrcTmIprmDebugMisc, alaDrcTmIprmDebugNhs, alaDrcTmIprmDebugPrefix, alaDrcTmIprmDebugRedist, alaDrcTmIprmDebugRoute4, alaDrcTmIprmDebugRoute6, alaDrcTmIprmDebugRoutemap, alaDrcTmIprmDebugRoutepref, alaDrcTmIprmDebugStatic, alaDrcTmIprmDebugBfd, alaDrcTmIprmDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of IPRM DRC TM." ::= { alcatelIND1DrcTmMIBGroups 9 } alaDrcTmIpmrmDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmIpmrmDebugError, alaDrcTmIpmrmDebugFib, alaDrcTmIpmrmDebugAging, alaDrcTmIpmrmDebugProtos, alaDrcTmIpmrmDebugIpms, alaDrcTmIpmrmDebugMip, alaDrcTmIpmrmDebugInit, alaDrcTmIpmrmDebugTm, alaDrcTmIpmrmDebugMisc, alaDrcTmIpmrmDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of IPMRM DRC TM." ::= { alcatelIND1DrcTmMIBGroups 10 } alaDrcTmOspf3DebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmOspf3DebugError, alaDrcTmOspf3DebugInfo , alaDrcTmOspf3DebugIntf, alaDrcTmOspf3DebugRecv , alaDrcTmOspf3DebugSend, alaDrcTmOspf3DebugNbr , alaDrcTmOspf3DebugState , alaDrcTmOspf3DebugArea , alaDrcTmOspf3DebugLsa , alaDrcTmOspf3DebugFlood , alaDrcTmOspf3DebugSpf, alaDrcTmOspf3DebugRdb, alaDrcTmOspf3DebugVlink, alaDrcTmOspf3DebugMip , alaDrcTmOspf3DebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of OSPF3 DRC TM." ::= { alcatelIND1DrcTmMIBGroups 11 } alaDrcTmLogDestinationMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmLogToSysFacility, alaDrcTmLogToSessionId, alaDrcTmLogBufferSize } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of DRC TM LOG DESTINATION." ::= { alcatelIND1DrcTmMIBGroups 12 } alaDrcTmIsisDebugMIBGroup OBJECT-GROUP OBJECTS { alaDrcTmIsisDebugError,alaDrcTmIsisDebugWarn, alaDrcTmIsisDebugPkt,alaDrcTmIsisDebugAdj, alaDrcTmIsisDebugCkt,alaDrcTmIsisDebugSpf, alaDrcTmIsisDebugLsp,alaDrcTmIsisDebugFlood, alaDrcTmIsisDebugIntf,alaDrcTmIsisDebugIprm, alaDrcTmIsisDebugMip,alaDrcTmIsisDebugMsg, alaDrcTmIsisDebugLeak,alaDrcTmIsisDebugSummary, alaDrcTmIsisDebugRestart,alaDrcTmIsisDebugAll } STATUS current DESCRIPTION "A collection of optional objects to provide debugging support of ISIS DRC TM." ::= { alcatelIND1DrcTmMIBGroups 13 } END