ALCATEL-IND1-ETHERNET-OAM-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, Integer32, Unsigned32 FROM SNMPv2-SMI MacAddress FROM SNMPv2-TC OBJECT-GROUP,MODULE-COMPLIANCE FROM SNMPv2-CONF softentIND1EthernetOam FROM ALCATEL-IND1-BASE Dot1agCfmMepId, dot1agCfmMaIndex, Dot1agCfmMepIdOrZero, dot1agCfmMdIndex, dot1agCfmMepIdentifier, dot1agCfmMepEntry FROM IEEE8021-CFM-MIB; alcatelIND1EoamMIB MODULE-IDENTITY LAST-UPDATED "200909080000Z" -- 09/08/2009 00:00GMT ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel Internetworking, Incorporated (Division 1, Formerly XYLAN Corporation) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://www.ind.alcatel.com File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Ethernet OAM for the Connectivity Fault Management. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE" REVISION "200909080000Z" DESCRIPTION "Conectivity Fault Management module for managing IEEE 802.1ag. This CFM MIB extends standard draft 802.1ag 8.1. The set of objects defined in this MIB, do not duplicate, nor conflict with any MIB object definitions defined in the 802.1ag 7.0 draft MIB." ::= { softentIND1EthernetOam 1} -- -------------------------------------------------------------- -- -- Ethernet OAM MIB -- alcatelIND1CfmMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Connectivity Fault Management (Ethernet OAM) Objects." ::= { alcatelIND1EoamMIB 1 } -- ------------------------------------------------------------- -- groups in the Ethernet OAM MIB -- ------------------------------------------------------------- alaCfmBase OBJECT IDENTIFIER ::= { alcatelIND1CfmMIBObjects 1 } alaCfmMep OBJECT IDENTIFIER ::= { alcatelIND1CfmMIBObjects 2 } alaCfmDelayResult OBJECT IDENTIFIER ::= { alcatelIND1CfmMIBObjects 3 } -- ------------------------------------------------------------- alaCfmGlobalClearStats OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear statistics control for Ethernet OAM. The value reset (1) indicates that Ethernet OAM should clear all statistic counters related to all MEPs in the system. By default, this object contains a zero value." DEFVAL { default } ::= { alaCfmBase 1 } alaCfmGlobalOWDClear OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear of one-way-delay entries control for Ethernet OAM. The value reset (1) indicates that Ethernet OAM should remove all the one-way-delay entries in the delay result table. By default, this object contains a zero value." DEFVAL { default } ::= { alaCfmBase 2 } alaCfmGlobalTWDClear OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear of two-way-delay entries control for Ethernet OAM. The value reset (1) indicates that Ethernet OAM should remove all the two-way-delay entries in the delay result table. By default, this object contains a zero value." DEFVAL { default } ::= { alaCfmBase 3 } -- -- Augmentation of the dot1agCfmMepTable -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, dot1agCfmMepTable, and the augmenting table, -- alaCfmMepTable. This in effect extends the dot1agCfmMepTable with an -- additional column to clear statistics. Creation (or deletion) of a row in -- the dot1agCfmMepTable results in the same fate for the row in the -- alaCfmMepTable. alaCfmMepTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table augments the MEP table for clearing statistics based on MdIndex/MaIndex/MEPId. This table also contains the objects for initiating 1DM and DMM." ::= { alaCfmMep 1 } alaCfmMepEntry OBJECT-TYPE SYNTAX AlaCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the alaCfmMepTable represents additional column for proprietary extension to the existing MEP table. It provides the facility to clear the statistics based on uniquely identified MEP. It also provides the facility to intiate 1DM and DMM" AUGMENTS { dot1agCfmMepEntry } ::= { alaCfmMepTable 1 } AlaCfmMepEntry ::= SEQUENCE { alaCfmMepClearStats INTEGER, alaCfmMepOWDTMacAddress MacAddress, alaCfmMepOWDTRMepIdentifier Dot1agCfmMepId, alaCfmMepOWDTPriority Unsigned32, alaCfmMepTWDTMacAddress MacAddress, alaCfmMepTWDTRMepIdentifier Dot1agCfmMepId, alaCfmMepTWDTPriority Unsigned32 } alaCfmMepClearStats OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all statistics parameters corresponding to this MEP. By default, this objects contains a zero value." DEFVAL { default } ::= { alaCfmMepEntry 1 } alaCfmMepOWDTMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the MAC address used as a target for the One-Way-Delay Test (OWDT). Setting this object will trigger a One-Way-Delay test to the specified MAC address. The number of messages transmitted per initiation will be 2. Upon completion of the test, the MacAddress will revert to it's default value, indicating that another test is possible." DEFVAL { '000000000000'H } ::= { alaCfmMepEntry 2 } alaCfmMepOWDTRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Mep-Id assigned to the Remote MEP." ::= { alaCfmMepEntry 3 } alaCfmMepOWDTPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the priority used in the generated test frame for the One-Way-Delay test." DEFVAL { 7 } ::= { alaCfmMepEntry 4 } alaCfmMepTWDTMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the MAC address used as a target for the Two-Way-Delay Test (TWDT). Setting this object will trigger a Two-Way-Delay test to the specified MAC address. The number of messages transmitted per initiation will be 2. Upon completion of the test, the MacAddress will revert to it's default value, indicating that another test is possible." DEFVAL { '000000000000'H } ::= { alaCfmMepEntry 5 } alaCfmMepTWDTRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Mep-Id assigned to the Remote MEP." ::= { alaCfmMepEntry 6 } alaCfmMepTWDTPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the priority used in the generated test frame for the Two-Way-Delay test." DEFVAL { 7 } ::= { alaCfmMepEntry 7 } -- -- MEP Delay Result Table -- alaCfmDelayResultTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaCfmDelayResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the results of all the One-Way/Two-Way Delay Tests from the originating MAC addresses. This table is not persistent over reboots of the chassis." ::= { alaCfmDelayResult 1 } alaCfmDelayResultEntry OBJECT-TYPE SYNTAX AlaCfmDelayResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP delay result table." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, alaCfmDelayResultType, alaCfmDelayResultRMepMacAddress } ::= { alaCfmDelayResultTable 1 } AlaCfmDelayResultEntry ::= SEQUENCE { alaCfmDelayResultType INTEGER, alaCfmDelayResultRMepMacAddress MacAddress, alaCfmDelayResultRMepIdentifier Dot1agCfmMepIdOrZero, alaCfmDelayResultTestDelay Integer32, alaCfmDelayResultVariation Unsigned32 } alaCfmDelayResultType OBJECT-TYPE SYNTAX INTEGER { oneWayTest (1), twoWayTest (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of test this row details." ::= { alaCfmDelayResultEntry 1 } alaCfmDelayResultRMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the MAC address of the Remote MEP." ::= { alaCfmDelayResultEntry 2 } alaCfmDelayResultRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Mep-Id of the Remote MEP. Valid only in the case of two-way delay. When initiated for a target Mep-Id contains the Mep-Id of the target, else if two-way delay initiated for a target mac-address contains '0'." ::= { alaCfmDelayResultEntry 3 } alaCfmDelayResultTestDelay OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the amount of time, measured in microseconds, from when the test-frame was transmitted to the time it was received minus the local processing time taken by the remote system." ::= { alaCfmDelayResultEntry 4 } alaCfmDelayResultVariation OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the amount of time delay variation, measured in microseconds, from the two most recent time delay measurements" ::= { alaCfmDelayResultEntry 5 } -- -------------------------------------------------------------- -- IEEE 802.1ag MIB - Conformance Information -- -------------------------------------------------------------- alaCfmConformance OBJECT IDENTIFIER ::= { alcatelIND1EoamMIB 2 } alaCfmGroups OBJECT IDENTIFIER ::= { alaCfmConformance 1 } alaCfmCompliances OBJECT IDENTIFIER ::= { alaCfmConformance 2 } -- -------------------------------------------------------------- -- -------------------------------------------------------------- -- Units of conformance -- -------------------------------------------------------------- alaCfmBaseGroup OBJECT-GROUP OBJECTS { alaCfmGlobalClearStats, alaCfmGlobalOWDClear, alaCfmGlobalTWDClear } STATUS current DESCRIPTION "Mandatory objects for the Base group" ::= { alaCfmGroups 1 } alaCfmMepGroup OBJECT-GROUP OBJECTS { alaCfmMepClearStats, alaCfmMepOWDTMacAddress, alaCfmMepOWDTRMepIdentifier, alaCfmMepOWDTPriority, alaCfmMepTWDTMacAddress, alaCfmMepTWDTRMepIdentifier, alaCfmMepTWDTPriority } STATUS current DESCRIPTION "Mandatory objects for the MEP group. Proprietary extension to support statistics clearing and one-way and two-way delay tests." ::= { alaCfmGroups 2 } alaCfmDelayResultGroup OBJECT-GROUP OBJECTS { alaCfmDelayResultRMepIdentifier, alaCfmDelayResultTestDelay, alaCfmDelayResultVariation } STATUS current DESCRIPTION "Mandatory objects for the Delay Result Group." ::= { alaCfmGroups 3 } -- -------------------------------------------------------------- -- Compliance statements -- -------------------------------------------------------------- alaCfmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of CFM." MODULE MANDATORY-GROUPS { alaCfmBaseGroup, alaCfmMepGroup, alaCfmDelayResultGroup } ::= { alaCfmCompliances 1 } -- -------------------------------------------------------------- END