ALCATEL-IND1-IPSEC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddressType, InetAddress FROM INET-ADDRESS-MIB softentIND1IPsec FROM ALCATEL-IND1-BASE; alcatelIND1IPsecMIB MODULE-IDENTITY LAST-UPDATED "200707020000Z" ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Proprietary IPsec MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200707020000Z" DESCRIPTION "The latest version of this MIB Module." ::= { softentIND1IPsec 1 } alcatelIND1IPsecMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPsecMIB 1 } -- -- Textual Conventions -- IPsecName ::= TEXTUAL-CONVENTION DISPLAY-HINT "20a" STATUS current DESCRIPTION "The name of a table entry." SYNTAX OCTET STRING (SIZE(1..20)) IPsecDescription ::= TEXTUAL-CONVENTION DISPLAY-HINT "200a" STATUS current DESCRIPTION "Optional description of a table entry." SYNTAX OCTET STRING (SIZE(0..200)) IPsecPortNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A port number value. 0 is the wildcard value to match any port." SYNTAX INTEGER (0..65535) IPsecPrefixLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Significant bits in an IPv6 address prefix. 0..32 is the valid range for IPv4 addresses. 0..128 is valid for IPv6 addresses" SYNTAX INTEGER (0..128) IPsecULProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An upper-layer protocol number. 255 is the wildcard value to match any protocol." SYNTAX INTEGER (0..255) IPsecAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Administrative state." SYNTAX INTEGER { enabled(1), disabled(2) } IPsecSAType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "SA type." SYNTAX INTEGER { ah(2), esp(3) } IPsecESPAlgorithm ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESP algorithms." SYNTAX INTEGER { none(0), descbc(2), des3cbc(3), null(11), aescbc(12), aesctr(13) } IPsecAHAlgorithm ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "AH algorithms." SYNTAX INTEGER { none(0), hmacmd5(2), hmacsha1(3), aesxcbcmac(9) } IPsecOperationalState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational state. enabled(1) - The entry is enabled. disabled(2) - The entry is administratively disabled or DNS resolution has experienced a permanent failure. dnspending(3) - Awaiting DNS resolution before making the entry active." SYNTAX INTEGER { enabled(1), disabled(2), dnspending(3) } -- -- Global IPsec Configuration -- alaIPsecConfig OBJECT IDENTIFIER ::= { alcatelIND1IPsecMIBObjects 1 } alaIPsecSecurityKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIPsecSecurityKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table allowing the configuration of the switch's IPsec security key. The security key is used to encrypt and IPsec related information retained in permanent storage. There is always a single row in this table with an index value of 1." ::= { alaIPsecConfig 1 } alaIPsecSecurityKeyEntry OBJECT-TYPE SYNTAX AlaIPsecSecurityKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The security key entry." INDEX { alaIPsecSecurityKeyID } ::= { alaIPsecSecurityKeyTable 1 } AlaIPsecSecurityKeyEntry ::= SEQUENCE { alaIPsecSecurityKeyID Unsigned32, alaIPsecSecurityKeyCurrent OCTET STRING, alaIPsecSecurityKeyNew OCTET STRING } alaIPsecSecurityKeyID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row's identifier. Only one entry is ever present, with an ID value of 1." ::= { alaIPsecSecurityKeyEntry 1 } alaIPsecSecurityKeyCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The current value of the IPsec security key. If an attempt is made to read the value of this object, a zero-length octet string will be returned." ::= { alaIPsecSecurityKeyEntry 2 } alaIPsecSecurityKeyNew OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set a new value for the IPsec security key. Both alaIPsecSecurityKeyCurrent (with its correct value) and alaIPsecSecurityKeyNew must be specified in the same SNMP SET message. If alaIPsecSecurityKeyCurrent is not present, or if its value is incorrect, the attempt to set a new key will fail." ::= { alaIPsecSecurityKeyEntry 3 } -- -- IPsec Statistics Table -- alaIPsecStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIPsecStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table allowing the IPv6 statistics to be retrieved." ::= { alaIPsecConfig 2 } alaIPsecStatisticsEntry OBJECT-TYPE SYNTAX AlaIPsecStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics entry." INDEX { alaIPsecStatisticsProtocol } ::= { alaIPsecStatisticsTable 1 } AlaIPsecStatisticsEntry ::= SEQUENCE { alaIPsecStatisticsProtocol INTEGER, alaIPsecStatisticsInSuccessful Counter32, alaIPsecStatisticsInPolicyViolation Counter32, alaIPsecStatisticsInNoSA Counter32, alaIPsecStatisticsInUnknownSPI Counter32, alaIPsecStatisticsInAHReplay Counter32, alaIPsecStatisticsInESPReplay Counter32, alaIPsecStatisticsInAHAuthenticationSuccess Counter32, alaIPsecStatisticsInAHAuthenticationFail Counter32, alaIPsecStatisticsInESPAuthenticationSuccess Counter32, alaIPsecStatisticsInESPAuthenticationFail Counter32, alaIPsecStatisticsInBadPacket Counter32, alaIPsecStatisticsInNoMemory Counter32, alaIPsecStatisticsOutSuccessful Counter32, alaIPsecStatisticsOutPolicyViolation Counter32, alaIPsecStatisticsOutNoSA Counter32, alaIPsecStatisticsOutBadPacket Counter32, alaIPsecStatisticsOutNoMemory Counter32, alaIPsecStatisticsInDiscarded Counter32, alaIPsecStatisticsOutDiscarded Counter32 } alaIPsecStatisticsProtocol OBJECT-TYPE SYNTAX INTEGER { ipv6(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP protocol version covered by the IPsec statistics." ::= { alaIPsecStatisticsEntry 1 } alaIPsecStatisticsInSuccessful OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets requiring IPsec processing that were successfully handled." ::= { alaIPsecStatisticsEntry 2 } alaIPsecStatisticsInPolicyViolation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets that were dropped because of policy violations." ::= { alaIPsecStatisticsEntry 3 } alaIPsecStatisticsInNoSA OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets dropped because no matching SA was found." ::= { alaIPsecStatisticsEntry 4 } alaIPsecStatisticsInUnknownSPI OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets dropped because the SPI was unknown." ::= { alaIPsecStatisticsEntry 5 } alaIPsecStatisticsInAHReplay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets that failed the AH replay check." ::= { alaIPsecStatisticsEntry 6 } alaIPsecStatisticsInESPReplay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets taht failed the ESP replay check." ::= { alaIPsecStatisticsEntry 7 } alaIPsecStatisticsInAHAuthenticationSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets that successfully passed AH authentication." ::= { alaIPsecStatisticsEntry 8 } alaIPsecStatisticsInAHAuthenticationFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets that failed AH authentication." ::= { alaIPsecStatisticsEntry 9 } alaIPsecStatisticsInESPAuthenticationSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets that successfully passed ESP authentication." ::= { alaIPsecStatisticsEntry 10 } alaIPsecStatisticsInESPAuthenticationFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets that failed ESP authentication." ::= { alaIPsecStatisticsEntry 11 } alaIPsecStatisticsInBadPacket OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets requiring IPsec processing that were not valid." ::= { alaIPsecStatisticsEntry 12 } alaIPsecStatisticsInNoMemory OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming IPsec packets dropped because no memory was available." ::= { alaIPsecStatisticsEntry 13 } alaIPsecStatisticsOutSuccessful OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing packets requiring IPsec processing that were successfully handled." ::= { alaIPsecStatisticsEntry 14 } alaIPsecStatisticsOutPolicyViolation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing packets dropped because of a policy violation." ::= { alaIPsecStatisticsEntry 15 } alaIPsecStatisticsOutNoSA OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing packets dropped because no matching SA was found." ::= { alaIPsecStatisticsEntry 16 } alaIPsecStatisticsOutBadPacket OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing packets requiring IPsec processing that were not valid." ::= { alaIPsecStatisticsEntry 17 } alaIPsecStatisticsOutNoMemory OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing IPsec packets dropped because no memory was available." ::= { alaIPsecStatisticsEntry 18 } alaIPsecStatisticsInDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming packets dropped because they matched a discard policy." ::= { alaIPsecStatisticsEntry 19 } alaIPsecStatisticsOutDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing packets dropped because they matched a discard policy." ::= { alaIPsecStatisticsEntry 20 } -- -- Security Policy Table -- alaIPsecSecurityPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIPsecSecurityPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table allowing the configuration of IPsec security policies." ::= { alcatelIND1IPsecMIBObjects 2 } alaIPsecSecurityPolicyEntry OBJECT-TYPE SYNTAX AlaIPsecSecurityPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A security policy entry." INDEX { alaIPsecSecurityPolicyID } ::= { alaIPsecSecurityPolicyTable 1 } AlaIPsecSecurityPolicyEntry ::= SEQUENCE { alaIPsecSecurityPolicyID Unsigned32, alaIPsecSecurityPolicySourceType InetAddressType, alaIPsecSecurityPolicySource InetAddress, alaIPsecSecurityPolicySourcePrefixLength IPsecPrefixLength, alaIPsecSecurityPolicySourcePort IPsecPortNumber, alaIPsecSecurityPolicyDestinationType InetAddressType, alaIPsecSecurityPolicyDestination InetAddress, alaIPsecSecurityPolicyDestinationPrefixLength IPsecPrefixLength, alaIPsecSecurityPolicyDestinationPort IPsecPortNumber, alaIPsecSecurityPolicyULProtocol IPsecULProtocol, alaIPsecSecurityPolicyICMPv6Type INTEGER, alaIPsecSecurityPolicyDirection INTEGER, alaIPsecSecurityPolicyName IPsecName, alaIPsecSecurityPolicyDescription IPsecDescription, alaIPsecSecurityPolicyAction INTEGER, alaIPsecSecurityPolicyAdminState IPsecAdminState, alaIPsecSecurityPolicyOperationalState IPsecOperationalState, alaIPsecSecurityPolicyPriority INTEGER, alaIPsecSecurityPolicyRowStatus RowStatus } alaIPsecSecurityPolicyID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique identifier for this security policy. When creating a new policy, a zero value must be specified. An available policy ID will then be automatically assigned to the policy." ::= { alaIPsecSecurityPolicyEntry 1 } alaIPsecSecurityPolicySourceType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of source address specified. Currently only ipv6(2) is allowed." ::= { alaIPsecSecurityPolicyEntry 2 } alaIPsecSecurityPolicySource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The source of packets covered by this policy." ::= { alaIPsecSecurityPolicyEntry 3 } alaIPsecSecurityPolicySourcePrefixLength OBJECT-TYPE SYNTAX IPsecPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The number of bits of the source address used to determine which packets are covered by this policy. The default value varies depending upon the type of source address specified: IPv4 - 32 IPv6 - 128 DNS name - 0 (any other value is ignored)" ::= { alaIPsecSecurityPolicyEntry 4 } alaIPsecSecurityPolicySourcePort OBJECT-TYPE SYNTAX IPsecPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The source port of packets covered by this policy. To match packets from any port, specify the 0 wildcard value. A wildcard policy will only be used when there is no exact match to a destination port in another entry." DEFVAL { 0 } ::= { alaIPsecSecurityPolicyEntry 5 } alaIPsecSecurityPolicyDestinationType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of destination address specified. Currently only ipv6(2) is allowed." ::= { alaIPsecSecurityPolicyEntry 6 } alaIPsecSecurityPolicyDestination OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The destination of packets covered by this policy." ::= { alaIPsecSecurityPolicyEntry 7 } alaIPsecSecurityPolicyDestinationPrefixLength OBJECT-TYPE SYNTAX IPsecPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The number of bits of the destination prefix used to determine which packets are covered by this policy. The default value varies depending upon the type of destination address specified: IPv4 - 32 IPv6 - 128 DNS name - 0 (any other value is ignored)" ::= { alaIPsecSecurityPolicyEntry 8 } alaIPsecSecurityPolicyDestinationPort OBJECT-TYPE SYNTAX IPsecPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The destination port of packets covered by this policy. To match packets from any port, specify the 0 wildcard value. A wildcard policy will only be used when there is no exact match to a destination port in another entry." DEFVAL { 0 } ::= { alaIPsecSecurityPolicyEntry 9 } alaIPsecSecurityPolicyULProtocol OBJECT-TYPE SYNTAX IPsecULProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "The upper-layer protocol of packets covered by this policy. To match all protocols, specify the 255 wildcard value. A wildcard policy will only be used when there is no exact match to the protocol value specified in another entry." DEFVAL { 255 } ::= { alaIPsecSecurityPolicyEntry 10 } alaIPsecSecurityPolicyICMPv6Type OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "If the upper-layer protocol is ICMPv6, an ICMPv6 type value may be specified to restrict the policy to a specific packet type. To match all ICMPv6 packets, the 0 wildcard value should be specified." DEFVAL { 0 } ::= { alaIPsecSecurityPolicyEntry 11 } alaIPsecSecurityPolicyDirection OBJECT-TYPE SYNTAX INTEGER { in(1), out(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The direction of traffic covered by this policy." ::= { alaIPsecSecurityPolicyEntry 12 } alaIPsecSecurityPolicyName OBJECT-TYPE SYNTAX IPsecName MAX-ACCESS read-create STATUS current DESCRIPTION "A name for this policy." ::= { alaIPsecSecurityPolicyEntry 13 } alaIPsecSecurityPolicyDescription OBJECT-TYPE SYNTAX IPsecDescription MAX-ACCESS read-create STATUS current DESCRIPTION "A detailed description of this policy." DEFVAL { "" } ::= { alaIPsecSecurityPolicyEntry 14 } alaIPsecSecurityPolicyAction OBJECT-TYPE SYNTAX INTEGER { discard(0), none(1), ipsec(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The action to take on traffic covered by this policy. discard(0) means that all traffic covered by the policy will be discarded. none(1) means that no IPsec processing will be done on the traffic covered by this policy. ipsec(2) means that IPsec processing will take place on the traffic. One or more rules should be defined in the IPsec Rule Table. If no rules are defined processing is identical to none(0) being specified." DEFVAL { ipsec } ::= { alaIPsecSecurityPolicyEntry 15 } alaIPsecSecurityPolicyAdminState OBJECT-TYPE SYNTAX IPsecAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "Allows a policy to be administratively enabled or disabled." DEFVAL { enabled } ::= { alaIPsecSecurityPolicyEntry 16 } alaIPsecSecurityPolicyOperationalState OBJECT-TYPE SYNTAX IPsecOperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of this policy." ::= { alaIPsecSecurityPolicyEntry 17 } alaIPsecSecurityPolicyPriority OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority for this policy. When traffic would be covered by multiple policies the policy with the highest priority value is used. If two policies have the same priority, the one configured first has precedence." DEFVAL { 100 } ::= { alaIPsecSecurityPolicyEntry 18 } alaIPsecSecurityPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to control the addition and removal of security policy entries." ::= { alaIPsecSecurityPolicyEntry 19 } -- -- Security Policy IPsec Rule Table -- alaIPsecSecurityPolicyRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIPsecSecurityPolicyRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table allowing the configuration of the IPsec rules for a security policy." ::= { alcatelIND1IPsecMIBObjects 3 } alaIPsecSecurityPolicyRuleEntry OBJECT-TYPE SYNTAX AlaIPsecSecurityPolicyRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A security policy entry." INDEX { alaIPsecSecurityPolicyID, alaIPsecSecurityPolicyRuleIndex } ::= { alaIPsecSecurityPolicyRuleTable 1 } AlaIPsecSecurityPolicyRuleEntry ::= SEQUENCE { alaIPsecSecurityPolicyRuleIndex Unsigned32, alaIPsecSecurityPolicyRuleProtocol INTEGER, alaIPsecSecurityPolicyRuleMode INTEGER, alaIPsecSecurityPolicyRuleRowStatus RowStatus } alaIPsecSecurityPolicyRuleIndex OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index specifying the order in which multiple rules for the same security policy will be applied. Rules are indexed by the order in which they are applied to the original payload. For example, for a security policy where an IPv6 payload should be protected by an ESP header, which should be protected by an AH header, there would be two Rule Table entries. The ESP entry would have an index of 1 (first rule applied to the payload). The AH entry would have an index of 2 (second rule applied)." ::= { alaIPsecSecurityPolicyRuleEntry 1 } alaIPsecSecurityPolicyRuleProtocol OBJECT-TYPE SYNTAX INTEGER { ah(1), esp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of header required by the rule." ::= { alaIPsecSecurityPolicyRuleEntry 2 } alaIPsecSecurityPolicyRuleMode OBJECT-TYPE SYNTAX INTEGER { transport(1) --tunnel(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode in which the rule's protocol is running. At present, only transport(1) is allowed. Until tunnel mode is supported, transport(1) will be treated as the default value." ::= { alaIPsecSecurityPolicyRuleEntry 3 } alaIPsecSecurityPolicyRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to control the addition and removal of security policy IPsec rule entries." ::= { alaIPsecSecurityPolicyRuleEntry 4 } -- -- IPsec Security Association Configuration Table -- alaIPsecSAConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIPsecSAConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table allowing the manual configuration of Security Associations in the Security Association Database (SAD)." ::= { alcatelIND1IPsecMIBObjects 4 } alaIPsecSAConfigEntry OBJECT-TYPE SYNTAX AlaIPsecSAConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Manually configured security association (SA) parameters." INDEX { alaIPsecSAConfigID } ::= { alaIPsecSAConfigTable 1 } AlaIPsecSAConfigEntry ::= SEQUENCE { alaIPsecSAConfigID Unsigned32, alaIPsecSAConfigType IPsecSAType, alaIPsecSAConfigSourceType InetAddressType, alaIPsecSAConfigSource InetAddress, alaIPsecSAConfigDestinationType InetAddressType, alaIPsecSAConfigDestination InetAddress, alaIPsecSAConfigSPI Unsigned32, alaIPsecSAConfigName IPsecName, alaIPsecSAConfigDescription IPsecDescription, alaIPsecSAConfigEncryptionAlgorithm IPsecESPAlgorithm, alaIPsecSAConfigEncryptionKeyLength Unsigned32, alaIPsecSAConfigAuthenticationAlgorithm IPsecAHAlgorithm, alaIPsecSAConfigAdminState IPsecAdminState, alaIPsecSAConfigOperationalState IPsecOperationalState, alaIPsecSAConfigRowStatus RowStatus } alaIPsecSAConfigID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique identifier for this manually configured SA. When creating a new SA, a zero value must be specified. An available ID will then be automatically assigned to the SA." ::= { alaIPsecSAConfigEntry 1 } alaIPsecSAConfigType OBJECT-TYPE SYNTAX IPsecSAType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of this SA: AH or ESP. Once set, the type may not be changed." ::= { alaIPsecSAConfigEntry 2 } alaIPsecSAConfigSourceType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of source address specified. Currently only ipv6(2) is allowed." ::= { alaIPsecSAConfigEntry 3 } alaIPsecSAConfigSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The source of packets covered by this SA." ::= { alaIPsecSAConfigEntry 4 } alaIPsecSAConfigDestinationType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of destination address specified. Currently only ipv6(2) is allowed." ::= { alaIPsecSAConfigEntry 5 } alaIPsecSAConfigDestination OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The destination of packets covered by this SA." ::= { alaIPsecSAConfigEntry 6 } alaIPsecSAConfigSPI OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Security Parameters Index (SPI) of this SA." ::= { alaIPsecSAConfigEntry 7 } alaIPsecSAConfigName OBJECT-TYPE SYNTAX IPsecName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of this manually configured SA." ::= { alaIPsecSAConfigEntry 8 } alaIPsecSAConfigDescription OBJECT-TYPE SYNTAX IPsecDescription MAX-ACCESS read-create STATUS current DESCRIPTION "A detailed description for the manually created IPsec SA." DEFVAL { "" } ::= { alaIPsecSAConfigEntry 9 } alaIPsecSAConfigEncryptionAlgorithm OBJECT-TYPE SYNTAX IPsecESPAlgorithm MAX-ACCESS read-create STATUS current DESCRIPTION "For an ESP SA, defines the encryption algorithm to be used. null(11) should be specified if ESP is being used for integrity only. If null(11) is specified, alaIPsecSAConfigAuthenticationAlgorithm may not be none(0). The value of this object is none(0) for AH SAs." DEFVAL { none } ::= { alaIPsecSAConfigEntry 10 } alaIPsecSAConfigEncryptionKeyLength OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "For those algorithms where multiple key lengths are supported, specifies the key length to be used. Zero may be specified to use the default key length." DEFVAL { 0 } ::= { alaIPsecSAConfigEntry 11 } alaIPsecSAConfigAuthenticationAlgorithm OBJECT-TYPE SYNTAX IPsecAHAlgorithm MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the authentication algorithm to be used. For ESP SAs, none(0) may be specified for encryption-only ESP. For ESP integrity-only, ESP integrity and encryption, or for AH SAs, hmacmd5(2), hmacsha1(3), or aesxcbcmac(9) must be specified." DEFVAL { none } ::= { alaIPsecSAConfigEntry 12 } alaIPsecSAConfigAdminState OBJECT-TYPE SYNTAX IPsecAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "Allows a manually configured SA to be administratively enabled or disabled." DEFVAL { enabled } ::= { alaIPsecSAConfigEntry 13 } alaIPsecSAConfigOperationalState OBJECT-TYPE SYNTAX IPsecOperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the manually configured SA." ::= { alaIPsecSAConfigEntry 14 } alaIPsecSAConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to control the addition and removal of manually configured IPsec SAs." ::= { alaIPsecSAConfigEntry 15 } -- -- IPsec Key Configuration Table -- alaIPsecKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIPsecKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used to configure the keys used by manually configured Security Associations in the IPsec Security Association Configuration table." ::= { alcatelIND1IPsecMIBObjects 5 } alaIPsecKeyEntry OBJECT-TYPE SYNTAX AlaIPsecKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPsec key. Keys in the table must be uniquely identified by the combination of key type and key name. However, since the key name can be up to 255 characters, beyond the 128-element size limit for SNMP index objects, the key ID is used to uniquely identify a key for SNMP access." INDEX { alaIPsecKeyID } ::= { alaIPsecKeyTable 1 } AlaIPsecKeyEntry ::= SEQUENCE { alaIPsecKeyID Unsigned32, alaIPsecKeyType INTEGER, alaIPsecKeyName OCTET STRING, alaIPsecKey OCTET STRING, alaIPsecKeyEncrypted TruthValue, alaIPsecKeyRowStatus RowStatus } alaIPsecKeyID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique identifier for this key. When creating a new key, a zero value must be specified. An available ID will then be automatically assigned to the key." ::= { alaIPsecKeyEntry 1 } alaIPsecKeyType OBJECT-TYPE SYNTAX INTEGER { saAuthentication(1), saEncryption(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if the key is to be used for encryption or authentication by a SA. Once a key is created, its type may not be changed." ::= { alaIPsecKeyEntry 2 } alaIPsecKeyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the key. For manually-configured SA keys, the name is limited to a maximum length of 20 characters and should correspond to an entry in the alaIPsecSAConfigTable. The key name may not be changed once a key is created." ::= { alaIPsecKeyEntry 3 } alaIPsecKey OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The key value. The value specified must match the required key length for the algorithm using the key. If an attempt is made to read the value of this object a zero-length octet string will be returned." ::= { alaIPsecKeyEntry 4 } alaIPsecKeyEncrypted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, the key value is specified in AOS encrypted form. For example, keys being restored from the configuration file." DEFVAL { false } ::= { alaIPsecKeyEntry 5 } alaIPsecKeyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to control the addition and removal of keys." ::= { alaIPsecKeyEntry 6 } -- -- conformance information -- alcatelIND1IPsecMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPsecMIB 2 } alcatelIND1IPsecMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1IPsecMIBConformance 1 } alcatelIND1IPsecMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1IPsecMIBConformance 2 } alaIPsecCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Alcatel switches implementing ALCATEL-IND1-IPSEC-MIB." MODULE MANDATORY-GROUPS { alaIPsecConfigGroup, alaIPsecSecurityPolicyGroup, alaIPsecSAConfigGroup, alaIPsecKeyGroup } ::= { alcatelIND1IPsecMIBCompliances 1 } -- -- units of conformance -- alaIPsecConfigGroup OBJECT-GROUP OBJECTS { -- alaIPsecSecurityKeyID, alaIPsecSecurityKeyCurrent, alaIPsecSecurityKeyNew, -- alaIPsecStatisticsProtocol, alaIPsecStatisticsInSuccessful, alaIPsecStatisticsInPolicyViolation, alaIPsecStatisticsInNoSA, alaIPsecStatisticsInUnknownSPI, alaIPsecStatisticsInAHReplay, alaIPsecStatisticsInESPReplay, alaIPsecStatisticsInAHAuthenticationSuccess, alaIPsecStatisticsInAHAuthenticationFail, alaIPsecStatisticsInESPAuthenticationSuccess, alaIPsecStatisticsInESPAuthenticationFail, alaIPsecStatisticsInBadPacket, alaIPsecStatisticsInNoMemory, alaIPsecStatisticsOutSuccessful, alaIPsecStatisticsOutPolicyViolation, alaIPsecStatisticsOutNoSA, alaIPsecStatisticsOutBadPacket, alaIPsecStatisticsOutNoMemory, alaIPsecStatisticsInDiscarded, alaIPsecStatisticsOutDiscarded } STATUS current DESCRIPTION "A collection of objects to support global configuration of IPsec." ::= { alcatelIND1IPsecMIBGroups 1 } alaIPsecSecurityPolicyGroup OBJECT-GROUP OBJECTS { -- alaIPsecSecurityPolicyID alaIPsecSecurityPolicySource, alaIPsecSecurityPolicySourceType, alaIPsecSecurityPolicySourcePrefixLength, alaIPsecSecurityPolicySourcePort, alaIPsecSecurityPolicyDestination, alaIPsecSecurityPolicyDestinationType, alaIPsecSecurityPolicyDestinationPrefixLength, alaIPsecSecurityPolicyDestinationPort, alaIPsecSecurityPolicyULProtocol, alaIPsecSecurityPolicyICMPv6Type, alaIPsecSecurityPolicyDirection, alaIPsecSecurityPolicyName, alaIPsecSecurityPolicyDescription, alaIPsecSecurityPolicyAction, alaIPsecSecurityPolicyAdminState, alaIPsecSecurityPolicyOperationalState, alaIPsecSecurityPolicyPriority, alaIPsecSecurityPolicyRowStatus, -- alaIPsecSecurityPolicyRuleIndex, alaIPsecSecurityPolicyRuleProtocol, alaIPsecSecurityPolicyRuleMode, alaIPsecSecurityPolicyRuleRowStatus } STATUS current DESCRIPTION "A collection of objects to support management of IPsec security policies." ::= { alcatelIND1IPsecMIBGroups 2 } alaIPsecSAConfigGroup OBJECT-GROUP OBJECTS { -- alaIPsecSAConfigID, alaIPsecSAConfigType, alaIPsecSAConfigSource, alaIPsecSAConfigSourceType, alaIPsecSAConfigDestination, alaIPsecSAConfigDestinationType, alaIPsecSAConfigSPI, alaIPsecSAConfigName, alaIPsecSAConfigDescription, alaIPsecSAConfigEncryptionAlgorithm, alaIPsecSAConfigEncryptionKeyLength, alaIPsecSAConfigAuthenticationAlgorithm, alaIPsecSAConfigAdminState, alaIPsecSAConfigOperationalState, alaIPsecSAConfigRowStatus } STATUS current DESCRIPTION "A collection of objects to support management of manually configured IPsec SAs." ::= { alcatelIND1IPsecMIBGroups 3 } alaIPsecKeyGroup OBJECT-GROUP OBJECTS { -- alaIPsecKeyID, alaIPsecKeyType, alaIPsecKeyName, alaIPsecKey, alaIPsecKeyEncrypted, alaIPsecKeyRowStatus } STATUS current DESCRIPTION "A collection of objects to support management of keys." ::= { alcatelIND1IPsecMIBGroups 4 } END