ALCATEL-IND1-IPX-MIB DEFINITIONS ::= BEGIN

IMPORTS
	RowStatus, TEXTUAL-CONVENTION
		FROM SNMPv2-TC
	OBJECT-IDENTITY, OBJECT-TYPE, MODULE-IDENTITY
		FROM SNMPv2-SMI
	MODULE-COMPLIANCE, OBJECT-GROUP
            FROM SNMPv2-CONF
	routingIND1Ipx
		FROM ALCATEL-IND1-BASE;

alcatelIND1IPXMIB       MODULE-IDENTITY

	LAST-UPDATED "200704030000Z"
	ORGANIZATION "Alcatel-Lucent"
	CONTACT-INFO
            "Please consult with Customer Service to ensure the most appropriate
              version of this document is used with the products in question:
         
        	       	    Alcatel-Lucent, Enterprise Solutions Division
               		    (Formerly Alcatel Internetworking, Incorporated)
                           	26801 West Agoura Road
                        	Agoura Hills, CA  91301-5122
                          	United States Of America
        
             Telephone:              North America  +1 800 995 2696
                                     Latin America  +1 877 919 9526
                                     Europe         +31 23 556 0100
                                     Asia           +65 394 7933
                                     All Other      +1 818 878 4507
        
            Electronic Mail:         support@ind.alcatel.com
            World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
            File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

	DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):
         
             This is the proprietary MIB for the IPX routing sub-sytem.
         
         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.
         
         No liability shall be assumed for any incidental, indirect, special, or
         consequential damages whatsoever arising from or related to this
         document or the information contained herein.
         
         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.
         
                     Copyright (C) 1995-2007 Alcatel-Lucent
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200704030000Z"
    DESCRIPTION
        "The latest version of this MIB Module."
	::= {routingIND1Ipx 1}

alcatelIND1IPXMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPXMIB 1 }

-- 

NetNumber ::= TEXTUAL-CONVENTION
	STATUS	current
	DESCRIPTION
		"IPX network number.  It is a 32-bit value divided into 
		4 octets."
	SYNTAX OCTET STRING(SIZE(4))

HostAddress ::= TEXTUAL-CONVENTION
	STATUS	current
	DESCRIPTION
		"IPX host MAC address.  It is a group of the 6 octets from the
		MAC address."
	SYNTAX OCTET STRING(SIZE(6))

-- Object groups

alaIpxRoutingGroup	OBJECT-IDENTITY
					STATUS	current
					DESCRIPTION
					"IPX routing information."
					::= {alcatelIND1IPXMIBObjects 1}
alaIpxFilterGroup 	OBJECT-IDENTITY
					STATUS	current
					DESCRIPTION
					"IPX filtering information."
					::= {alcatelIND1IPXMIBObjects 2}
alaIpxTimerGroup 	OBJECT-IDENTITY
					STATUS	current
					DESCRIPTION
					"IPX timer information."
					::= {alcatelIND1IPXMIBObjects 3}

-- Objects

--Static Routes Table
	-- This table contains the information about all the static routes
	-- defined.There may be more than one static route to any given
	-- destination.Only the route currently being used will also be
	-- present in the Destination Table defined above.

alaIpxStaticRouteTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXStaticRouteEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION 
		"The Static Routes table is used and add entries and extract 
		information from the static routes configured in the system."
	::= {alaIpxRoutingGroup 1}

alaIpxStaticRouteEntry OBJECT-TYPE
	SYNTAX IPXStaticRouteEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"Each entry corresponds to one static route."
	INDEX {
		alaIpxStaticRouteNetNum
	}
	::= {alaIpxStaticRouteTable 1}

IPXStaticRouteEntry ::= SEQUENCE {
	alaIpxStaticRouteNetNum
		NetNumber,
	alaIpxStaticRouteNextHopNet
		NetNumber,
	alaIpxStaticRouteNextHopNode
		HostAddress,
	alaIpxStaticRouteTicks
		INTEGER,
	alaIpxStaticRouteHopCount
		INTEGER,
	alaIpxStaticRouteRowStatus
		RowStatus
	}

alaIpxStaticRouteNetNum OBJECT-TYPE
	SYNTAX NetNumber
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX network number of the route's destination."
	DEFVAL { '00000000'h }
	::= {alaIpxStaticRouteEntry 1}

alaIpxStaticRouteNextHopNet OBJECT-TYPE
	SYNTAX NetNumber
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"The IPX network number of the router used to
		reach the first hop in the static route."
	DEFVAL { '00000000'h }
	::= {alaIpxStaticRouteEntry 2}

alaIpxStaticRouteNextHopNode OBJECT-TYPE
	SYNTAX HostAddress
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"The IPX node number of the router used to
		reach the first hop in the static route."
	DEFVAL { '000000000000'h }
	::= {alaIpxStaticRouteEntry 3}

alaIpxStaticRouteTicks OBJECT-TYPE
	SYNTAX INTEGER(0..65535)
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"The delay, in ticks, to reach the route's destination."
	DEFVAL { 0 }
	::= {alaIpxStaticRouteEntry 4}

alaIpxStaticRouteHopCount OBJECT-TYPE
	SYNTAX INTEGER(0..16)
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"The number of hops necessary to reach the destination."
	DEFVAL { 0 }
	::= {alaIpxStaticRouteEntry 5}

alaIpxStaticRouteRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxStaticRouteTable is constrained
		by the operational state of the corresponding static route.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaIpxStaticRouteEntry 6}



--This table contains the information about the default route
-- for IPX.

alaIpxDefRouteTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXDefRouteEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The default route table contains information about
		the destinations to which all packets are sent when the
		destination network is not known."
	::= {alaIpxRoutingGroup 2}


alaIpxDefRouteEntry OBJECT-TYPE
	SYNTAX IPXDefRouteEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"One table entry per switch for default route."
	INDEX {
			alaIpxDefRouteVlanId
			}
	::= {alaIpxDefRouteTable 1}

IPXDefRouteEntry ::= SEQUENCE {
	alaIpxDefRouteVlanId
		INTEGER,
	alaIpxDefRouteNet
		NetNumber,
	alaIpxDefRouteNode
		HostAddress,
	alaIpxDefRouteRowStatus
		RowStatus
	}


alaIpxDefRouteVlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The VlanId for this filter.  If VlanId equals 0, the filter
		is applied globally."
	DEFVAL { 0 }
	::= {alaIpxDefRouteEntry 1}

alaIpxDefRouteNet OBJECT-TYPE
	SYNTAX NetNumber
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"The IPX network number of the router used to
		reach the first hop in the default route."
	DEFVAL { '00000000'h }
	::= {alaIpxDefRouteEntry 2}

alaIpxDefRouteNode OBJECT-TYPE
	SYNTAX HostAddress
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"The IPX node number of the router used to
		reach the first hop in the default route."
	DEFVAL { '000000000000'h }
	::= {alaIpxDefRouteEntry 3}

alaIpxDefRouteRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxDefRouteTable is constrained
		by the operational state of the corresponding default route entry.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaIpxDefRouteEntry 4}


--This table contains the information about the extended RIP / SAP
-- messages for IPX.


alaIpxExtMsgTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXExtMsgEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The extended RIP and SAP messages table contains information 
		about which vlans use extended RIP and SAP packets."
	::= {alaIpxRoutingGroup 3}

alaIpxExtMsgEntry OBJECT-TYPE
	SYNTAX IPXExtMsgEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"One table entry per Vlan."
	INDEX {
			alaIpxExtMsgVlanId
			}
	::= {alaIpxExtMsgTable 1}

IPXExtMsgEntry ::= SEQUENCE {
	alaIpxExtMsgVlanId
		INTEGER,
	alaIpxExtMsgMode
		INTEGER,
      alaIpxExtMsgRowStatus
                RowStatus
	}

alaIpxExtMsgVlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The VlanId for this filter.  If VlanId equals 0, the filter
		is applied globally."
	DEFVAL { 0 }
	::= {alaIpxExtMsgEntry 1}

alaIpxExtMsgMode OBJECT-TYPE
	SYNTAX INTEGER {
					disabled(1),
					enabled(2)
					}
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"Indicates whether extended RIP/SAP
		packets are sent and received."
	DEFVAL { disabled }
	::= {alaIpxExtMsgEntry 2}

alaIpxExtMsgRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
	  "The row status variable, used in accordance to installation
	        and removal conventions for conceptual rows.  The RowStatus of
	        a currenty active row in the alaIpxExtMsgTable is constrained
	        by the operational state of the corresponding watchdog entry.
	        The RowStatus values that are supported are the following:
	        	active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
	                        the system."
	::= {alaIpxExtMsgEntry 3}

alaIpxFlush OBJECT-TYPE
	SYNTAX INTEGER {rip(1), sap(2), both(3)}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION 
		"Flushes the routing and the SAP tables.  The tables will then
		be rebuilt from the broadcast messages received from the
		networks.  Reading this variable is undefined"
	::= {alaIpxRoutingGroup 4}

--RIP / SAP Filter Table
-- This table contains the information about all of the IPX RIP / SAP
-- filters that have been defined.

alaIpxRipSapFilterTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXRipSapFilterEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX Rip/Sap Filter Table contains information about
		all filters that have been defined."
	::= {alaIpxFilterGroup 1}

alaIpxRipSapFilterEntry OBJECT-TYPE
	SYNTAX IPXRipSapFilterEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"Each entry corresponds to one filter."
	INDEX {
		alaIpxRipSapFilterVlanId,
		alaIpxRipSapFilterType,
		alaIpxRipSapFilterNet,
		alaIpxRipSapFilterNetMask,
		alaIpxRipSapFilterNode,
		alaIpxRipSapFilterNodeMask,
		alaIpxRipSapFilterSvcType
	}
	::= {alaIpxRipSapFilterTable 1}

IPXRipSapFilterEntry ::= SEQUENCE {
	alaIpxRipSapFilterVlanId
	INTEGER,
	alaIpxRipSapFilterType
	INTEGER,
	alaIpxRipSapFilterNet
	NetNumber,
	alaIpxRipSapFilterNetMask
	NetNumber,
	alaIpxRipSapFilterNode
	HostAddress,
	alaIpxRipSapFilterNodeMask
	HostAddress,
	alaIpxRipSapFilterSvcType
	INTEGER,
	alaIpxRipSapFilterMode
	INTEGER,
	alaIpxRipSapFilterRowStatus
	RowStatus
}

alaIpxRipSapFilterVlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The VlanId for this filter.  If VlanId equals 0, the filter
		is applied globally."
	DEFVAL { 0 }
	::= {alaIpxRipSapFilterEntry 1}

alaIpxRipSapFilterType OBJECT-TYPE
	SYNTAX INTEGER {
				sapOutput(1),
				sapInput(2),
				gnsOutput(3),
				ripOutput(4),
				ripInput(5)
				}
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The type of filter. "
	DEFVAL { 1 }
	::= {alaIpxRipSapFilterEntry 2}

alaIpxRipSapFilterNet OBJECT-TYPE
	SYNTAX NetNumber
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX Network Address to filter.  A network address
		of all 0 's is used to denote All Networks."
	DEFVAL { '00000000'h }
	::= {alaIpxRipSapFilterEntry 3}

alaIpxRipSapFilterNetMask OBJECT-TYPE
	SYNTAX NetNumber
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX Network Mask to be used."
	DEFVAL { 'ffffffff'h }
	::= {alaIpxRipSapFilterEntry 4}

alaIpxRipSapFilterNode OBJECT-TYPE
	SYNTAX HostAddress
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX node address to filter. A node address
		of all 0 's is used to denote All Nodes."
	DEFVAL { '000000000000'h }
	::= {alaIpxRipSapFilterEntry 5}

alaIpxRipSapFilterNodeMask OBJECT-TYPE
	SYNTAX HostAddress	
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX node address mask to be used."
	DEFVAL { 'ffffffffffff'h }
	::= {alaIpxRipSapFilterEntry 6}

alaIpxRipSapFilterSvcType OBJECT-TYPE
	SYNTAX INTEGER(0..65535)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The SAP service type on which to filter.  The SAP
		service types are defined by Novell.A value of
		ALL(65535) indicates that all services will be filtered."
	DEFVAL { 65535 }
	::= {alaIpxRipSapFilterEntry 7}

alaIpxRipSapFilterMode OBJECT-TYPE
	SYNTAX INTEGER {
					allow(1),
					block(2)
					}
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"The action defined by this filter. block (1) means
		packets matching this filter will be blocked, and
		allow(0) means that packets matching this filter
		will be allowed."
	DEFVAL { allow }
	::= {alaIpxRipSapFilterEntry 8}

alaIpxRipSapFilterRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxRipSapFilterTable is constrained
		by the operational state of the corresponding filter entry.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaIpxRipSapFilterEntry 10}

--This table contains the information about the IPX Watchdog Spoofing
-- status of all of the WAN routing services.

alaIpxWatchdogSpoofTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXWatchdogSpoofEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX Watchdog Spoofing Table contains information about
		all of the current IPX WAN watchdog spoofing entry statuses."
	::= {alaIpxFilterGroup 2}

alaIpxWatchdogSpoofEntry OBJECT-TYPE
	SYNTAX IPXWatchdogSpoofEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"Each entry corresponds to one WAN routing service."
	INDEX {
			alaIpxWatchdogSpoofVlanId
			}
	::= {alaIpxWatchdogSpoofTable 1}

IPXWatchdogSpoofEntry ::= SEQUENCE {
	alaIpxWatchdogSpoofVlanId
		INTEGER,
	alaIpxWatchdogSpoofMode
		INTEGER,
	alaIpxWatchdogSpoofRowStatus
		RowStatus
	}

alaIpxWatchdogSpoofVlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The VlanId of the WAN routing service that this entry
		applies to.  If VlanId equals 0, the filter
		is applied globally to all WAN Vlans."
	DEFVAL { 0 }
	::= {alaIpxWatchdogSpoofEntry 1}

alaIpxWatchdogSpoofMode OBJECT-TYPE
	SYNTAX INTEGER {
					disabled(1),
					enabled(2)
					}
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"This controls whether the IPX Watchdog Spoofing is
		enabled or disabled.When enabled, this routing service
		will spoof IPX Watchdog packets.When disabled,
		this routing service will not spoof IPX Watchdog packets."
	DEFVAL { enabled }
	::= {alaIpxWatchdogSpoofEntry 2}

alaIpxWatchdogSpoofRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxWatchdogSpoofTable is constrained
		by the operational state of the corresponding watchdog entry.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaIpxWatchdogSpoofEntry 3}

--This table contains the information about the IPX Serialization
-- Filtering Status of all of the WAN routing services.

alaIpxSerialFilterTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXSerialFilterEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX Serialization Filtering Table contains information about
		all of the current IPX WAN serialization filtering entry statuses."
	::= {alaIpxFilterGroup 3}

alaIpxSerialFilterEntry OBJECT-TYPE
	SYNTAX IPXSerialFilterEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"Each entry corresponds to one WAN routing service."
	INDEX {
			alaIpxSerialFilterVlanId
			}
	::= {alaIpxSerialFilterTable 1}

IPXSerialFilterEntry ::= SEQUENCE {
	alaIpxSerialFilterVlanId
		INTEGER,
	alaIpxSerialFilterMode
		INTEGER,
	alaIpxSerialFilterRowStatus
		RowStatus
	}

alaIpxSerialFilterVlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The VlanId of the WAN routing service that this entry
		applies to.  If VlanId equals 0, the filter
		is applied globally to all WAN Vlans."
	DEFVAL { 0 }
	::= {alaIpxSerialFilterEntry 1}

alaIpxSerialFilterMode OBJECT-TYPE
	SYNTAX INTEGER {
					disabled(1),
					enabled(2)
					}
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"This controls whether the IPX Serialization Filtering is
		enabled or disabled.When enabled, this routing service
		will filter IPX Serialization packets.When disabled,
		this routing service will not filter IPX Serialization
		packets."
	DEFVAL { enabled }
	::= {alaIpxSerialFilterEntry 2}

alaIpxSerialFilterRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxSerialFilterTable is constrained
		by the operational state of the corresponding filter entry.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaIpxSerialFilterEntry 3}

--This table contains the information about the SPX Keepalive Spoofing
-- status of all of the WAN routing services.

alaSpxKeepaliveSpoofTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SPXKeepaliveSpoofEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The SPX Keepalive Spoofing Table contains information about
		all of the current IPX WAN SPX spoofing filtering entry statuses."
	::= {alaIpxFilterGroup 4}

alaSpxKeepaliveSpoofEntry OBJECT-TYPE
	SYNTAX SPXKeepaliveSpoofEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"Each entry corresponds to one WAN routing service."
	INDEX {
			alaSpxKeepaliveSpoofVlanId
			}
	::= {alaSpxKeepaliveSpoofTable 1}

SPXKeepaliveSpoofEntry ::= SEQUENCE {
	alaSpxKeepaliveSpoofVlanId
		INTEGER,
	alaSpxKeepaliveSpoofMode
		INTEGER,
	alaSpxKeepaliveSpoofRowStatus
		RowStatus
	}

alaSpxKeepaliveSpoofVlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible 
	STATUS current
	DESCRIPTION 
		"The VlanId of the WAN routing service that this entry
		applies to.  If VlanId equals 0, the filter
		is applied globally to all WAN Vlans."
	DEFVAL { 0 }
	::= {alaSpxKeepaliveSpoofEntry 1}

alaSpxKeepaliveSpoofMode OBJECT-TYPE
	SYNTAX INTEGER {
					disabled(1),
					enabled(2)
					}
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"This controls whether the SPX Keepalive Spoofing is
		enabled or disabled.When enabled, this routing service
		will spoof SPX Keepalive packets.When disabled,
		this routing service will not spoof SPX Keepalive packets."
	DEFVAL { enabled }
	::= {alaSpxKeepaliveSpoofEntry 2}

alaSpxKeepaliveSpoofRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxKeepaliveSpoofTable is constrained
		by the operational state of the corresponding keepalive entry.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaSpxKeepaliveSpoofEntry 3}

--This table contains the information about the IPX Type 20 packet
-- control for NetBios over IPX control.

alaIpxType20Table OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXType20Entry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX Type 20 Table contains information about
		all of the current Type 20 filtering entry statuses."
	::= {alaIpxFilterGroup 5}

alaIpxType20Entry OBJECT-TYPE
	SYNTAX IPXType20Entry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"Each entry corresponds to one Virtual LAN."
	INDEX {
			alaIpxType20VlanId
			}
	::= {alaIpxType20Table 1}

IPXType20Entry ::= SEQUENCE {
	alaIpxType20VlanId
		INTEGER,
	alaIpxType20Mode
		INTEGER,
	alaIpxType20RowStatus
		RowStatus
	}

alaIpxType20VlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The VLAN Id of the routing interface that this entry
		applies to.  If VlanId equals 0, the filter
		is applied globally."
	DEFVAL { 0 }
	::= {alaIpxType20Entry 1}

alaIpxType20Mode OBJECT-TYPE
	SYNTAX INTEGER {
					disabled(1),
					enabled(2)
					}
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"This controls whether IPX Type 20 packet are
		enabled or disabled.When enabled, this routing interface
		will forward Type 20 packets.When disabled,
		the packets will not."
	DEFVAL { enabled }
	::= {alaIpxType20Entry 2}

alaIpxType20RowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxType20Table is constrained
		by the operational state of the corresponding type 20 entry.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaIpxType20Entry 3}

--This table contains the information about the IPX RIP and SAP timer
-- control.

alaIpxTimerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IPXTimerEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The IPX Timer Table contains information about
		all of the current Timer adjustments entry statuses."
	::= {alaIpxTimerGroup 1}

alaIpxTimerEntry OBJECT-TYPE
	SYNTAX IPXTimerEntry
	MAX-ACCESS not-accessible
	STATUS current
    DESCRIPTION 
		"Each entry corresponds to one Virtual LAN."
	INDEX {
			alaIpxTimerVlanId
			}
	::= {alaIpxTimerTable 1}

IPXTimerEntry ::= SEQUENCE {
	alaIpxTimerVlanId
		INTEGER,
	alaIpxTimerRip
		INTEGER,
	alaIpxTimerSap
		INTEGER,
	alaIpxTimerRowStatus
		RowStatus
	}

alaIpxTimerVlanId OBJECT-TYPE
	SYNTAX INTEGER(0..4094)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION 
		"The VLAN Id of the routing interface that this entry
		applies to.  If VlanId equals 0, the filter
		is applied globally."
	DEFVAL { 0 }
	::= {alaIpxTimerEntry 1}

alaIpxTimerSap OBJECT-TYPE
	SYNTAX INTEGER(1..180)
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"This controls whether IPX SAP packet timer duration."
	DEFVAL { 60 }
	::= {alaIpxTimerEntry 2}

alaIpxTimerRip OBJECT-TYPE
	SYNTAX INTEGER(1..180)
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
		"This controls whether IPX RIP packet timer duration."
	DEFVAL { 60 }
	::= {alaIpxTimerEntry 3}

alaIpxTimerRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION 
        "The row status variable, used in accordance to installation
		and removal conventions for conceptual rows.  The RowStatus of
		a currenty active row in the alaIpxTimerTable is constrained
		by the operational state of the corresponding timer entry.
		The RowStatus values that are supported are the following:
			active:  This indicates that the row is active and valid.
			createAndGo:  This will create the row and activate it.
			destroy:  This value will deactivate the row and delete from 
				the system."
	::= {alaIpxTimerEntry 4}

-- conformance information

alcatelIND1IPXMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPXMIB 2 }
alcatelIND1IPXMIBCompliances OBJECT IDENTIFIER
			 ::= { alcatelIND1IPXMIBConformance 1 }

alcatelIND1IPXMIBGroups OBJECT IDENTIFIER 
			::= { alcatelIND1IPXMIBConformance 2 }

--

alcatelIND1IPXMIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for IPX Subsystem and
            ALCATEL-IND1-IPX-MIB."
    MODULE  -- this module
	MANDATORY-GROUPS { alcatelIND1IPXMIBStaticRouteGroup, alcatelIND1IPXMIBDefRouteGroup,
			alcatelIND1IPXMIBExtMsgGroup, alcatelIND1IPXMIBFlushGroup,
			alcatelIND1IPXMIBRipSapFilterGroup, alcatelIND1IPXMIBWatchdogSpoofGroup,
			alcatelIND1IPXMIBSerialFilterGroup, alcatelIND1IPXMIBKeepaliveSpoofGroup,
			alcatelIND1IPXMIBType20Group, alcatelIND1IPXMIBTimerGroup }

    ::= { alcatelIND1IPXMIBCompliances 1 }

-- units of conformance

alcatelIND1IPXMIBStaticRouteGroup OBJECT-GROUP
    OBJECTS {   alaIpxStaticRouteNextHopNet, alaIpxStaticRouteNextHopNode,
		alaIpxStaticRouteTicks, alaIpxStaticRouteHopCount,
		alaIpxStaticRouteRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from Static Route Table."
    ::= { alcatelIND1IPXMIBGroups 1 }

alcatelIND1IPXMIBDefRouteGroup OBJECT-GROUP
    OBJECTS {   alaIpxDefRouteNet, alaIpxDefRouteNode, alaIpxDefRouteRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from Default Route Table."
    ::= { alcatelIND1IPXMIBGroups 2 }

alcatelIND1IPXMIBExtMsgGroup OBJECT-GROUP
    OBJECTS { alaIpxExtMsgMode, alaIpxExtMsgRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from Extended Message Table."
    ::= { alcatelIND1IPXMIBGroups 3 }

alcatelIND1IPXMIBFlushGroup OBJECT-GROUP
    OBJECTS {   alaIpxFlush
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to flush the RIP and SAP tables."
    ::= { alcatelIND1IPXMIBGroups 4 }

alcatelIND1IPXMIBRipSapFilterGroup OBJECT-GROUP
    OBJECTS {   alaIpxRipSapFilterMode, alaIpxRipSapFilterRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from  the RIP and SAP Filter tables."
    ::= { alcatelIND1IPXMIBGroups 5 }

alcatelIND1IPXMIBWatchdogSpoofGroup OBJECT-GROUP
    OBJECTS {   alaIpxWatchdogSpoofMode, alaIpxWatchdogSpoofRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from the Watchdog spoof tables."
    ::= { alcatelIND1IPXMIBGroups 6 }

alcatelIND1IPXMIBSerialFilterGroup OBJECT-GROUP
    OBJECTS {   alaIpxSerialFilterMode, alaIpxSerialFilterRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from the Serialization Filter tables."
    ::= { alcatelIND1IPXMIBGroups 7 }

alcatelIND1IPXMIBKeepaliveSpoofGroup OBJECT-GROUP
    OBJECTS {  alaSpxKeepaliveSpoofMode, alaSpxKeepaliveSpoofRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from the Keepalive Spoof tables."
    ::= { alcatelIND1IPXMIBGroups 8 }

alcatelIND1IPXMIBType20Group OBJECT-GROUP
    OBJECTS {  alaIpxType20Mode, alaIpxType20RowStatus 
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from the Type 20 packet tables."
    ::= { alcatelIND1IPXMIBGroups 9 }

alcatelIND1IPXMIBTimerGroup OBJECT-GROUP
    OBJECTS { alaIpxTimerRip, alaIpxTimerSap, alaIpxTimerRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects from the RIP and SAP Timer tables."
    ::= { alcatelIND1IPXMIBGroups 10 }

END