ALCATEL-IND1-LAG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, Counter32, TimeTicks FROM SNMPv2-SMI DisplayString, MacAddress, TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC NOTIFICATION-TYPE FROM SNMPv2-SMI NOTIFICATION-GROUP FROM SNMPv2-CONF MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB PortList FROM Q-BRIDGE-MIB LacpKey,LacpState,ChurnState FROM IEEE8023-LAG-MIB lnkaggTraps, softentIND1LnkAgg FROM ALCATEL-IND1-BASE ; alcatelIND1LAGMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Link Aggregation module for managing ALCATEL FALCON product This MIB is an image of the 802.3ad standard. The aim of this proprietary MIB is to allow the creation of aggregate objects with their size. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" ::= { softentIND1LnkAgg 1 } alcatelIND1LAGMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1LAGMIB 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- -- - Local Declares LacpType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The object supports or not (Omnichannel) the LACP protocol ." SYNTAX INTEGER { lacpOff(0), lacpOn(1) } -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- groups in the LAG MIB -- ------------------------------------------------------------- alclnkaggAgg OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 1 } alclnkaggAggPort OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 2 } -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- The Tables Last Changed Object -- ------------------------------------------------------------- alclnkaggTablesLastChanged OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time of the most recent change to the alclnkaggAggTable, alclnkaggAggPortListTable, or alclnkaggAggPortTable." ::= { alcatelIND1LAGMIBObjects 3 } -- ------------------------------------------------------------- -- The Aggregator Configuration Table -- ------------------------------------------------------------- alclnkaggAggTable OBJECT-TYPE SYNTAX SEQUENCE OF AlclnkaggAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every Aggregator that is associated with this System. To create specify alclnkaggAggIndex,alclnkaggAggSize and alclnkaggAggLacpType. " REFERENCE "IEEE 802.3 Subclause 30.7.1" ::= { alclnkaggAgg 1 } alclnkaggAggEntry OBJECT-TYPE SYNTAX AlclnkaggAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator." INDEX { alclnkaggAggIndex } ::= { alclnkaggAggTable 1 } AlclnkaggAggEntry ::= SEQUENCE { alclnkaggAggIndex InterfaceIndex, alclnkaggAggMACAddress MacAddress, alclnkaggAggActorSystemPriority INTEGER, alclnkaggAggActorSystemID MacAddress, alclnkaggAggPartnerAdminKey LacpKey, alclnkaggAggActorAdminKey LacpKey, alclnkaggAggActorOperKey LacpKey, alclnkaggAggPartnerSystemID MacAddress, alclnkaggAggPartnerSystemPriority INTEGER, alclnkaggAggPartnerOperKey LacpKey, -------------------------------- -- Specific Proprietary Part ------------------------------ alclnkaggAggSize INTEGER, alclnkaggAggNumber INTEGER, alclnkaggAggDescr DisplayString, alclnkaggAggName DisplayString, alclnkaggAggLacpType LacpType, alclnkaggAggAdminState -- Adminstate, INTEGER, alclnkaggAggOperState INTEGER, alclnkaggAggNbrSelectedPorts INTEGER, alclnkaggAggNbrAttachedPorts INTEGER, alclnkaggAggPrimaryPortIndex InterfaceIndex, alclnkaggAggPrimaryPortPosition INTEGER, alclnkaggAggRowStatus RowStatus, alclnkaggAggPreemptState INTEGER, alclnkaggAggPreemptValue Integer32 } alclnkaggAggIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.1" ::= { alclnkaggAggEntry 1 } alclnkaggAggMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.9" ::= { alclnkaggAggEntry 2 } alclnkaggAggActorSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "A 2-octet read-create value indicating the priority value associated with the Actor's System ID." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.5" ::= { alclnkaggAggEntry 3 } alclnkaggAggActorSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A 6-octet read-create MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed. objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see )." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.4" ::= { alclnkaggAggEntry 4 } alclnkaggAggPartnerAdminKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-create STATUS current DESCRIPTION "The current Administrative value of the Key accepted for the Aggregator's current protocol Partner. Optional this is a 16-bit read-create value. If the aggregation is manually configured, this Key value will be a value assigned by the local System. The administrative Key value may differ from the operational " REFERENCE " specific to ALCATEL " ::= { alclnkaggAggEntry 5 } alclnkaggAggActorAdminKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-create STATUS current DESCRIPTION "The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit, read-create value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.7" ::= { alclnkaggAggEntry 6 } alclnkaggAggActorOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit read-only value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.8" ::= { alclnkaggAggEntry 7 } alclnkaggAggPartnerSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A 6-octet read-create MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.10" ::= { alclnkaggAggEntry 8 } alclnkaggAggPartnerSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "A 2-octet read-create value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.11" ::= { alclnkaggAggEntry 9 } alclnkaggAggPartnerOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-create STATUS current DESCRIPTION "The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-create value. If the aggregation is manually configured, this Key value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.12" ::= { alclnkaggAggEntry 10 } ------------------------------------------------------------ -- Specific Proprietary Part ----------------------------------------------------------- alclnkaggAggSize OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum number of links that could be attached to this aggregator, This nominator is mandatory and is a required field in order to create a row in this table" REFERENCE "specific to ALCATEL" ::= { alclnkaggAggEntry 11 } alclnkaggAggNumber OBJECT-TYPE SYNTAX INTEGER(0..127) -- MAX-ACCESS read-create MAX-ACCESS read-only STATUS current DESCRIPTION -- "Aggreagtor number to assign a reference number at the creation of -- an aggregator mandatory for the Omnichhannel object creation" "Aggreagtor number reference the aggregate dedicated from the ifindex at the creation" REFERENCE " specific to ALCATEL" ::= { alclnkaggAggEntry 12 } -- alclnkaggAggDescr is equivalent to ifDescr in ifTable alclnkaggAggDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description is a human readable string which describes of the type of aggregator object OMNICHANNEL / LACP etc … " REFERENCE " IEEE 802.3 Subclause 30.7.1.1.2" ::= { alclnkaggAggEntry 13 } -- alclnkaggAggDescr is equivalent to ifDescr in ifXTable alclnkaggAggName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the aggregator is human readable string manually given by the operator" REFERENCE " IEEE 802.3 Subclause 30.7.1.1.3" ::= { alclnkaggAggEntry 14 } alclnkaggAggLacpType OBJECT-TYPE SYNTAX LacpType MAX-ACCESS read-create STATUS current DESCRIPTION "Aggreagtor set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the aggregator, cannot be modified later " REFERENCE " specific to ALCATEL" ::= { alclnkaggAggEntry 15 } -- alclnkaggAggAdminState is equivalent to ifAdminStatus in ifTable alclnkaggAggAdminState OBJECT-TYPE -- SYNTAX AdminState SYNTAX INTEGER { enable(1), -- ready to pass packets disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "status assigned by the admnistrator. The activation of the aggregator is managed by this nominator" REFERENCE " IEEE 802.3 Subclause 30.7.1.1.13" ::= { alclnkaggAggEntry 16 } -- alclnkaggAggOperState is similar to ifOperStatus in ifTable but the nominator -- does not take exactly the same values. alclnkaggAggOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), logicPortCreatFailed(3), qReservationFailed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the aggregator with proprietary values operational state from iftable corresponds to UP state " REFERENCE " IEEE 802.3 Subclause 30.7.1.1.14" ::= { alclnkaggAggEntry 17 } alclnkaggAggNbrSelectedPorts OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports selected at the momemt ." REFERENCE "Specific to ALCATEL" ::= { alclnkaggAggEntry 18 } alclnkaggAggNbrAttachedPorts OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports attached at the momemt ." REFERENCE "Specific to ALCATEL" ::= { alclnkaggAggEntry 19 } alclnkaggAggPrimaryPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "the ifindex of the primary port in the aggregator used to send BPDUs and flooding frames Zeo indicates no primary port is available ." REFERENCE "Specific to ALCATEL" ::= { alclnkaggAggEntry 20 } alclnkaggAggPrimaryPortPosition OBJECT-TYPE SYNTAX INTEGER (-1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "the port index number in the aggregator used to send BPDUs and flooding frames ." REFERENCE "Specific to ALCATEL" ::= { alclnkaggAggEntry 21 } alclnkaggAggRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the RowStatus (locking flag) for creating or deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType and must be supplied in the request to create a row, it is a required field." REFERENCE " specific to ALCATEL " ::= { alclnkaggAggEntry 22 } alclnkaggAggPreemptState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This sets the pre-emption state for an aggregate. The default value is disable." REFERENCE "specific to ALCATEL" ::={ alclnkaggAggEntry 23} alclnkaggAggPreemptValue OBJECT-TYPE SYNTAX Integer32 (30..300) MAX-ACCESS read-create STATUS current DESCRIPTION "This sets the pre-empt timer value in seconds for an aggregate. The default value is 30 seconds." REFERENCE "specific to ALCATEL" ::={ alclnkaggAggEntry 24} -- ------------------------------------------------------------- -- The Aggregation Port List Table -- ------------------------------------------------------------- alclnkaggAggPortListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlclnkaggAggPortListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains a list of all the ports associated with each Aggregator." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.31" ::= { alclnkaggAgg 2 } alclnkaggAggPortListEntry OBJECT-TYPE SYNTAX AlclnkaggAggPortListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator." INDEX { alclnkaggAggIndex } ::= { alclnkaggAggPortListTable 1 } AlclnkaggAggPortListEntry ::= SEQUENCE { alclnkaggAggPortListPorts PortList } alclnkaggAggPortListPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.31" ::= { alclnkaggAggPortListEntry 1 } -- ------------------------------------------------------------- -- The Aggregation Port Table -- ------------------------------------------------------------- alclnkaggAggPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AlclnkaggAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port." REFERENCE "IEEE 802.3 Subclause 30.7.2" ::= { alclnkaggAggPort 1 } alclnkaggAggPortEntry OBJECT-TYPE SYNTAX AlclnkaggAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device." INDEX { alclnkaggAggPortIndex } ::= { alclnkaggAggPortTable 1 } AlclnkaggAggPortEntry ::= SEQUENCE { alclnkaggAggPortIndex InterfaceIndex, alclnkaggAggPortActorSystemPriority INTEGER, alclnkaggAggPortActorSystemID MacAddress, alclnkaggAggPortActorAdminKey LacpKey, alclnkaggAggPortActorOperKey LacpKey, alclnkaggAggPortPartnerAdminSystemPriority INTEGER, alclnkaggAggPortPartnerOperSystemPriority INTEGER, alclnkaggAggPortPartnerAdminSystemID MacAddress, alclnkaggAggPortPartnerOperSystemID MacAddress, alclnkaggAggPortPartnerAdminKey LacpKey, alclnkaggAggPortPartnerOperKey LacpKey, alclnkaggAggPortSelectedAggID InterfaceIndex, alclnkaggAggPortAttachedAggID InterfaceIndex, alclnkaggAggPortActorPort INTEGER, alclnkaggAggPortActorPortPriority INTEGER, alclnkaggAggPortPartnerAdminPort INTEGER, alclnkaggAggPortPartnerOperPort INTEGER, alclnkaggAggPortPartnerAdminPortPriority INTEGER, alclnkaggAggPortPartnerOperPortPriority INTEGER, alclnkaggAggPortActorAdminState LacpState, alclnkaggAggPortActorOperState LacpState, alclnkaggAggPortPartnerAdminState LacpState, alclnkaggAggPortPartnerOperState LacpState, ------------------------------------------------------------ -- Specific Proprietary Part ----------------------------------------------------------- alclnkaggAggPortSelectedAggNumber INTEGER, alclnkaggAggPortGlobalPortNumber INTEGER, alclnkaggAggPortAdminState -- AdminState, INTEGER, alclnkaggAggPortOperState -- OperState, INTEGER, alclnkaggAggPortState INTEGER, alclnkaggAggPortLinkState INTEGER, alclnkaggAggPortPrimary INTEGER, alclnkaggAggPortLacpType LacpType, alclnkaggAggPortRowStatus RowStatus, alclnkaggAggPortStandbyState INTEGER } alclnkaggAggPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the port" REFERENCE "IEEE 802.3 Subclause 30.7.2.1.1" ::= { alclnkaggAggPortEntry 1 } alclnkaggAggPortActorSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "A 2-octet read-create value used to define the priority value associated with the Actor's System ID." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.2" ::= { alclnkaggAggPortEntry 2 } alclnkaggAggPortActorSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A 6-octet read-create MAC address value that defines the value of the System ID for the System that contains this Aggregation Port." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.3" ::= { alclnkaggAggPortEntry 3 } alclnkaggAggPortActorAdminKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-create STATUS current DESCRIPTION "The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-create value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.4" ::= { alclnkaggAggPortEntry 4 } alclnkaggAggPortActorOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.5" ::= { alclnkaggAggPortEntry 5 } alclnkaggAggPortPartnerAdminSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "A 2-octet read-create value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.6" ::= { alclnkaggAggPortEntry 6 } alclnkaggAggPortPartnerOperSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.7" ::= { alclnkaggAggPortEntry 7 } alclnkaggAggPortPartnerAdminSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A 6-octet read-create MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.8" ::= { alclnkaggAggPortEntry 8 } alclnkaggAggPortPartnerOperSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.9" ::= { alclnkaggAggPortEntry 9 } alclnkaggAggPortPartnerAdminKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-create STATUS current DESCRIPTION "The current administrative value of the Key for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.10" ::= { alclnkaggAggPortEntry 10 } alclnkaggAggPortPartnerOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.11" ::= { alclnkaggAggPortEntry 11 } alclnkaggAggPortSelectedAggID OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.12" ::= { alclnkaggAggPortEntry 12 } alclnkaggAggPortAttachedAggID OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.13" ::= { alclnkaggAggPortEntry 13 } alclnkaggAggPortActorPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.14" ::= { alclnkaggAggPortEntry 14 } alclnkaggAggPortActorPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value assigned to this Aggregation Port. This 16-bit value is read-create." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.15" ::= { alclnkaggAggPortEntry 15 } alclnkaggAggPortPartnerAdminPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The current administrative value of the port number for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.16" ::= { alclnkaggAggPortEntry 16 } alclnkaggAggPortPartnerOperPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.17" ::= { alclnkaggAggPortEntry 17 } alclnkaggAggPortPartnerAdminPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.18" ::= { alclnkaggAggPortEntry 18 } alclnkaggAggPortPartnerOperPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.19" ::= { alclnkaggAggPortEntry 19 } alclnkaggAggPortActorAdminState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-create STATUS current DESCRIPTION "A string of 8 bits, corresponding to the administrative values of Actor_State () as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-create." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.20" ::= { alclnkaggAggPortEntry 20 } alclnkaggAggPortActorOperState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in . This attribute value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.21" ::= { alclnkaggAggPortEntry 21 } alclnkaggAggPortPartnerAdminState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-create STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in . This attribute value is read-create. The assigned value is used in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.22" ::= { alclnkaggAggPortEntry 22 } alclnkaggAggPortPartnerOperState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in . In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.23" ::= { alclnkaggAggPortEntry 23 } ------------------------------------------------------------ -- Specific Proprietary Part ----------------------------------------------------------- alclnkaggAggPortSelectedAggNumber OBJECT-TYPE SYNTAX INTEGER(-1..127) MAX-ACCESS read-create STATUS current DESCRIPTION "Aggreagtor number to attach a port at its creation mandatory and only used for the Omnichhannel not allowed for LACP (-1) value displayed when it is not significant" REFERENCE " specific to ALCATEL" ::= { alclnkaggAggPortEntry 24 } alclnkaggAggPortGlobalPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Physical reference of the port " REFERENCE " specific to ALCATEL" ::= { alclnkaggAggPortEntry 25 } -- alclnkaggAggPortAdminState is equivalent to ifAdminStatus in ifTable alclnkaggAggPortAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), -- ready to pass packets disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "status assigned by the admnistrator. port activation done by iftable this nominator is equivalent to ifAdminStatus in ifTable " REFERENCE " IEEE 802.3 Subclause 30.7.1.1.13" ::= { alclnkaggAggPortEntry 26 } alclnkaggAggPortOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), notAttached(3), notAggregable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the port regarding the traffic" REFERENCE " specific to ALCATEL" ::= { alclnkaggAggPortEntry 27 } alclnkaggAggPortState OBJECT-TYPE SYNTAX INTEGER { created(1), configurable(2), configured(3), selected(4), reserved(5), attached(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "aggregation status of the port" REFERENCE " specific to ALCATEL" ::= { alclnkaggAggPortEntry 28 } alclnkaggAggPortLinkState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the link" REFERENCE " specific to ALCATEL" ::= { alclnkaggAggPortEntry 29 } -- alclnkaggAggPortLinkState is equivalent to ifOperStatus alclnkaggAggPortPrimary OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), notSignificant(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "port primary or not" REFERENCE " specific to ALCATEL" ::= { alclnkaggAggPortEntry 30 } alclnkaggAggPortLacpType OBJECT-TYPE SYNTAX LacpType MAX-ACCESS read-create -- STATUS mandatory STATUS current DESCRIPTION "Port set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the port" REFERENCE " specific to ALCATEL" ::= { alclnkaggAggPortEntry 31 } alclnkaggAggPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the RowStatus (locking flag) for creating or deleting aggregatable port objects. alclnkaggAggPortActorAdminKey and alclnkaggAggPortSlotSlice must be supplied in the request to create a row, it is a required field." REFERENCE " specific to ALCATEL " ::= { alclnkaggAggPortEntry 32 } alclnkaggAggPortStandbyState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This sets the standby state for a port. The default value is disable." ::= { alclnkaggAggPortEntry 33 } -- ------------------------------------------------------------- -- LACP Statistics Table -- ------------------------------------------------------------- alclnkaggAggPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlclnkaggAggPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port." REFERENCE "IEEE 802.3 Subclause 30.7.3" ::= { alclnkaggAggPort 2 } alclnkaggAggPortStatsEntry OBJECT-TYPE SYNTAX AlclnkaggAggPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Aggregation Control Protocol statistics for each port on this device." INDEX { alclnkaggAggPortIndex } ::= { alclnkaggAggPortStatsTable 1 } AlclnkaggAggPortStatsEntry ::= SEQUENCE { alclnkaggAggPortStatsLACPDUsRx Counter32, alclnkaggAggPortStatsMarkerPDUsRx Counter32, alclnkaggAggPortStatsMarkerResponsePDUsRx Counter32, alclnkaggAggPortStatsUnknownRx Counter32, alclnkaggAggPortStatsIllegalRx Counter32, alclnkaggAggPortStatsLACPDUsTx Counter32, alclnkaggAggPortStatsMarkerPDUsTx Counter32, alclnkaggAggPortStatsMarkerResponsePDUsTx Counter32 } alclnkaggAggPortStatsLACPDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid LACPDUs received on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.2" ::= { alclnkaggAggPortStatsEntry 1 } alclnkaggAggPortStatsMarkerPDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid Marker PDUs received on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.3" ::= { alclnkaggAggPortStatsEntry 2 } alclnkaggAggPortStatsMarkerResponsePDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.4" ::= { alclnkaggAggPortStatsEntry 3 } alclnkaggAggPortStatsUnknownRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received that either: - carry the Slow Protocols Ethernet Type value (), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (), but do not carry the Slow Protocols Ethernet Type. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.5" ::= { alclnkaggAggPortStatsEntry 4 } alclnkaggAggPortStatsIllegalRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received that carry the Slow Protocols Ethernet Type value (), but contain a badly formed PDU or an illegal value of Protocol Subtype (). This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.6" ::= { alclnkaggAggPortStatsEntry 5 } alclnkaggAggPortStatsLACPDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACPDUs transmitted on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.7" ::= { alclnkaggAggPortStatsEntry 6 } alclnkaggAggPortStatsMarkerPDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.8" ::= { alclnkaggAggPortStatsEntry 7 } alclnkaggAggPortStatsMarkerResponsePDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.9" ::= { alclnkaggAggPortStatsEntry 8 } -- ------------------------------------------------------------- -- LACP Debug Table -- ------------------------------------------------------------- alclnkaggAggPortDebugTable OBJECT-TYPE SYNTAX SEQUENCE OF AlclnkaggAggPortDebugEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port." REFERENCE "IEEE 802.3 Subclause 30.7.4" ::= { alclnkaggAggPort 3 } alclnkaggAggPortDebugEntry OBJECT-TYPE SYNTAX AlclnkaggAggPortDebugEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the debug parameters for a port." INDEX { alclnkaggAggPortIndex } ::= { alclnkaggAggPortDebugTable 1 } AlclnkaggAggPortDebugEntry ::= SEQUENCE { alclnkaggAggPortDebugRxState INTEGER, alclnkaggAggPortDebugLastRxTime TimeTicks, alclnkaggAggPortDebugMuxState INTEGER, alclnkaggAggPortDebugMuxReason DisplayString, alclnkaggAggPortDebugActorChurnState ChurnState, alclnkaggAggPortDebugPartnerChurnState ChurnState, alclnkaggAggPortDebugActorChurnCount Counter32, alclnkaggAggPortDebugPartnerChurnCount Counter32, alclnkaggAggPortDebugActorSyncTransitionCount Counter32, alclnkaggAggPortDebugPartnerSyncTransitionCount Counter32, alclnkaggAggPortDebugActorChangeCount Counter32, alclnkaggAggPortDebugPartnerChangeCount Counter32 } alclnkaggAggPortDebugRxState OBJECT-TYPE SYNTAX INTEGER { current(1), expired(2), defaulted(3), initialize(4), lacpDisabled(5), portDisabled(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine. is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or 'portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.2" ::= { alclnkaggAggPortDebugEntry 1 } alclnkaggAggPortDebugLastRxTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.3" ::= { alclnkaggAggPortDebugEntry 2 } alclnkaggAggPortDebugMuxState OBJECT-TYPE SYNTAX INTEGER { detached(1), waiting(2), attached(3), collecting(4), distributing(5), collectingDistributing(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.4" ::= { alclnkaggAggPortDebugEntry 3 } alclnkaggAggPortDebugMuxReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.5" ::= { alclnkaggAggPortDebugEntry 4 } alclnkaggAggPortDebugActorChurnState OBJECT-TYPE SYNTAX ChurnState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Actor Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.6" ::= { alclnkaggAggPortDebugEntry 5 } alclnkaggAggPortDebugPartnerChurnState OBJECT-TYPE SYNTAX ChurnState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Partner Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.7" ::= { alclnkaggAggPortDebugEntry 6 } alclnkaggAggPortDebugActorChurnCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.8" ::= { alclnkaggAggPortDebugEntry 7 } alclnkaggAggPortDebugPartnerChurnCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.9" ::= { alclnkaggAggPortDebugEntry 8 } alclnkaggAggPortDebugActorSyncTransitionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Actor's Mux state machine () has entered the IN_SYNC state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.10" ::= { alclnkaggAggPortDebugEntry 9 } alclnkaggAggPortDebugPartnerSyncTransitionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Partner's Mux state machine () has entered the IN_SYNC state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.11" ::= { alclnkaggAggPortDebugEntry 10 } alclnkaggAggPortDebugActorChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.12" ::= { alclnkaggAggPortDebugEntry 11 } alclnkaggAggPortDebugPartnerChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Partner's perception of the LAG ID (see ) for this Aggregation Port has changed. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.13" ::= { alclnkaggAggPortDebugEntry 12 } -- ------------------------------------------------------------- -- Link Aggregation additional parameters -- ------------------------------------------------------------- alclnkaggAggEniActivate OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This variable activates or deactivates link aggregation for ENI" ::= { alclnkaggAgg 3 } alclnkaggSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF AlclnkaggSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row in this table represents the link aggregation status for the associated slot. " REFERENCE "specific to Alcatel" ::= { alclnkaggAgg 4 } alclnkaggSlotEntry OBJECT-TYPE SYNTAX AlclnkaggSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for link aggregation." INDEX { alclnkaggSlotNum } ::= { alclnkaggSlotTable 1 } AlclnkaggSlotEntry ::= SEQUENCE { alclnkaggSlotNum INTEGER, alclnkaggSlotStatus INTEGER, alclnkaggMultipleAggPerSlot INTEGER } alclnkaggSlotNum OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot number." REFERENCE "specific to Alcatel" ::= { alclnkaggSlotEntry 1 } alclnkaggSlotStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Link aggregation enable/disable" ::= { alclnkaggSlotEntry 2 } alclnkaggMultipleAggPerSlot OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable multiple Link aggregation per slot" ::= { alclnkaggSlotEntry 3 } ---------------------------------------------------------------- -- Table for mapping LAG Id to the ifIndex of this aggregate --------------------------------------------------------------- alclnkaggAggIdIfIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF AlclnkaggAggIdIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row in this table represents the link aggregation aggregate id's corresponding ifIndex. " REFERENCE "specific to Alcatel" ::= { alclnkaggAgg 5 } alclnkaggAggIdIfIndexEntry OBJECT-TYPE SYNTAX AlclnkaggAggIdIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameters for link aggregation aggregate id relationship to ifIndex." INDEX { alclnkaggIfIndex } ::= { alclnkaggAggIdIfIndexTable 1 } AlclnkaggAggIdIfIndexEntry ::= SEQUENCE { alclnkaggIfIndex INTEGER, alclnkaggAggId INTEGER } alclnkaggIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfIndex for the given Aggregate ID" ::= { alclnkaggAggIdIfIndexEntry 1 } alclnkaggAggId OBJECT-TYPE SYNTAX INTEGER (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The aggregate id number." REFERENCE "specific to Alcatel" ::= { alclnkaggAggIdIfIndexEntry 2 } -- ------------------------------------------------------------- -- IEEE 802.3ad MIB - Conformance Information -- ------------------------------------------------------------- alcatelIND1LAGMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Link Aggregation Subsystem Conformance Information." ::= { alcatelIND1LAGMIB 2 } alcatelIND1LAGMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Link Aggregation Subsystem Units Of Conformance." ::= { alcatelIND1LAGMIBConformance 1 } alcatelIND1LAGMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Link Aggregation Subsystem Compliance Statements." ::= { alcatelIND1LAGMIBConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- alclnkaggAggGroup OBJECT-GROUP OBJECTS { alclnkaggAggActorSystemID, alclnkaggAggActorSystemPriority, alclnkaggAggActorAdminKey, alclnkaggAggMACAddress, alclnkaggAggActorOperKey, alclnkaggAggPartnerSystemID, alclnkaggAggPartnerSystemPriority, alclnkaggAggPartnerOperKey, -------------------------------- -- Specific Proprietary Part ------------------------------ alclnkaggAggSize, alclnkaggAggNumber, alclnkaggAggDescr, alclnkaggAggName, alclnkaggAggLacpType, alclnkaggAggAdminState, alclnkaggAggOperState, alclnkaggAggNbrSelectedPorts, alclnkaggAggNbrAttachedPorts, alclnkaggAggPrimaryPortIndex, alclnkaggAggPrimaryPortPosition, alclnkaggAggPreemptState, alclnkaggAggPreemptValue } STATUS current DESCRIPTION "A collection of objects providing information about an aggregation." ::= { alcatelIND1LAGMIBGroups 1 } alclnkaggAggPortListGroup OBJECT-GROUP OBJECTS { alclnkaggAggPortListPorts } STATUS current DESCRIPTION "A collection of objects providing information about every port in an aggregation." ::= { alcatelIND1LAGMIBGroups 2 } alclnkaggAggPortGroup OBJECT-GROUP OBJECTS { alclnkaggAggPortActorSystemPriority, alclnkaggAggPortActorSystemID, alclnkaggAggPortActorAdminKey, alclnkaggAggPortActorOperKey, alclnkaggAggPortPartnerAdminSystemPriority, alclnkaggAggPortPartnerOperSystemPriority, alclnkaggAggPortPartnerAdminSystemID, alclnkaggAggPortPartnerOperSystemID, alclnkaggAggPortPartnerAdminKey, alclnkaggAggPortPartnerOperKey, alclnkaggAggPortSelectedAggID, alclnkaggAggPortAttachedAggID, alclnkaggAggPortActorPort, alclnkaggAggPortActorPortPriority, alclnkaggAggPortPartnerAdminPort, alclnkaggAggPortPartnerOperPort, alclnkaggAggPortPartnerAdminPortPriority, alclnkaggAggPortPartnerOperPortPriority, alclnkaggAggPortActorAdminState, alclnkaggAggPortActorOperState, alclnkaggAggPortPartnerAdminState, alclnkaggAggPortPartnerOperState, alclnkaggAggPortSelectedAggNumber, alclnkaggAggPortGlobalPortNumber, alclnkaggAggPortAdminState, alclnkaggAggPortOperState, alclnkaggAggPortState, alclnkaggAggPortLinkState, alclnkaggAggPortPrimary, alclnkaggAggPortLacpType, alclnkaggAggPortStandbyState } STATUS current DESCRIPTION "A collection of objects providing information about every port in an aggregation." ::= { alcatelIND1LAGMIBGroups 3 } alclnkaggAggPortStatsGroup OBJECT-GROUP OBJECTS { alclnkaggAggPortStatsLACPDUsRx, alclnkaggAggPortStatsMarkerPDUsRx, alclnkaggAggPortStatsMarkerResponsePDUsRx, alclnkaggAggPortStatsUnknownRx, alclnkaggAggPortStatsIllegalRx, alclnkaggAggPortStatsLACPDUsTx, alclnkaggAggPortStatsMarkerPDUsTx, alclnkaggAggPortStatsMarkerResponsePDUsTx } STATUS current DESCRIPTION "A collection of objects providing information about every port in an aggregation." ::= { alcatelIND1LAGMIBGroups 4 } alclnkaggAggPortDebugGroup OBJECT-GROUP OBJECTS { alclnkaggAggPortDebugRxState, alclnkaggAggPortDebugLastRxTime, alclnkaggAggPortDebugActorChurnState, alclnkaggAggPortDebugPartnerChurnState, alclnkaggAggPortDebugActorChurnCount, alclnkaggAggPortDebugPartnerChurnCount, alclnkaggAggPortDebugActorSyncTransitionCount, alclnkaggAggPortDebugPartnerSyncTransitionCount, alclnkaggAggPortDebugActorChangeCount, alclnkaggAggPortDebugPartnerChangeCount } STATUS current DESCRIPTION "A collection of objects providing debug information about. every aggregated port." ::= { alcatelIND1LAGMIBGroups 5 } alclnkaggTablesLastChangedGroup OBJECT-GROUP OBJECTS { alclnkaggTablesLastChanged } STATUS current DESCRIPTION "A collection of objects providing information about the time of changes to the configuration of aggregations and their ports." ::= { alclnkaggAggGroup 6 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- alclnkaggAggCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for device support of Link Aggregation." MODULE MANDATORY-GROUPS { alclnkaggAggGroup, alclnkaggAggPortGroup, alclnkaggTablesLastChangedGroup, lnkaggNotificationVarsGroup } GROUP alclnkaggAggPortListGroup DESCRIPTION "This group is optional." GROUP alclnkaggAggPortStatsGroup DESCRIPTION "This group is optional." GROUP alclnkaggAggPortDebugGroup DESCRIPTION "This group is optional." ::= { alcatelIND1LAGMIBCompliances 1 } lnkaggNotificationVarsGroup OBJECT-GROUP OBJECTS { traplnkaggAggId, traplnkaggPortIfIndex } STATUS current DESCRIPTION "Collection of objects which appear only in notifications." ::= {alcatelIND1LAGMIBGroups 7 } lnkaggTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { lnkaggAggUp, lnkaggAggDown, lnkaggPortJoin, lnkaggPortLeave, lnkaggPortRemove, lnkaggPortReserve } STATUS current DESCRIPTION "Collection of Traps for Link Aggregation ." ::= { alcatelIND1LAGMIBGroups 8 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx lnkaggNotificationVars OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx traplnkaggAggId OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Index Value of Link Aggregation group ." ::= {lnkaggNotificationVars 1 } traplnkaggPortIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Port of Link Aggregate group ." ::= {lnkaggNotificationVars 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- NOTIFICATIONS -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx lnkaggAggUp NOTIFICATION-TYPE OBJECTS { traplnkaggAggId, traplnkaggPortIfIndex } STATUS current DESCRIPTION "The Link Aggregation is active . This trap is sent when any one port of the link aggregation goes to attached state." ::= { lnkaggTraps 0 1 } lnkaggAggDown NOTIFICATION-TYPE OBJECTS { traplnkaggAggId, traplnkaggPortIfIndex } STATUS current DESCRIPTION "The Link Aggregation is not active . This trap is sent when all ports of the link aggregation goes out of attached state." ::= { lnkaggTraps 0 2 } lnkaggPortJoin NOTIFICATION-TYPE OBJECTS { traplnkaggAggId, traplnkaggPortIfIndex } STATUS current DESCRIPTION "The Link Aggregation port joins the aggregate . This trap is sent when given port of the link aggregation goes to attached state." ::= { lnkaggTraps 0 3 } lnkaggPortLeave NOTIFICATION-TYPE OBJECTS { traplnkaggAggId, traplnkaggPortIfIndex } STATUS current DESCRIPTION "The Link Aggregation port leaves the aggregate . This trap is sent when given port of the link aggregation goes out of attached state." ::= { lnkaggTraps 0 4 } lnkaggPortRemove NOTIFICATION-TYPE OBJECTS { traplnkaggAggId, traplnkaggPortIfIndex } STATUS current DESCRIPTION "The Link Aggregation port removed from the aggregate . This trap is sent when given port of the link aggregation removed due to invalid configuration ." ::= { lnkaggTraps 0 5 } lnkaggPortReserve NOTIFICATION-TYPE OBJECTS { traplnkaggAggId, traplnkaggPortIfIndex } STATUS current DESCRIPTION "The Link Aggregation port is reserved for this aggregate . This trap is sent when given port of the link aggregation goes to reserved state." ::= { lnkaggTraps 0 6 } END