ALCATEL-IND1-LBD-MIB DEFINITIONS ::= BEGIN IMPORTS Unsigned32, Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, OBJECT-IDENTITY FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB softentIND1Lbd, alaLbdTraps FROM ALCATEL-IND1-BASE; alcatelIND1LBDMIB MODULE-IDENTITY LAST-UPDATED "200812100000Z" ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel Internetworking, Incorporated (Division 1, Formerly XYLAN Corporation) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://www.ind.alcatel.com File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line LBD for detection loopback. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE" REVISION "200812100000Z" DESCRIPTION "The LBD mib defines a set of LBD related management objects for ports that support Loop Back Detection(LBD) mechanism. LBD mechanism monitors the physical configuration of cables and detect when a loopback detection exists due to any physical or logical problem. In case such problem, it shall take appropriate measures for the port based upon the configured mode of operation and raise a trap to the user." ::= { softentIND1Lbd 1} -- -------------------------------------------------------------- alcatelIND1LBDMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Loopback-Detection Subsystem Managed Objects." ::= { alcatelIND1LBDMIB 1 } alcatelIND1LBDMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for LBD Module MIB Subsystem Conformance Information." ::= { alcatelIND1LBDMIB 2 } alcatelIND1LBDMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for LBD Module MIB Subsystem Units of Conformance." ::= { alcatelIND1LBDMIBConformance 1 } alcatelIND1LBDMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for LBD Module MIB Subsystem Compliance Statements." ::= { alcatelIND1LBDMIBConformance 2 } -- -------------------------------------------------------------- -- Texual Convention -- -------------------------------------------------------------- AlaLbdPortConfigLbdOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the current operational state of this port." SYNTAX INTEGER { inactive (0), -- Specifies that the operational state is inactive. normal (1), -- Specifies that the operational state is normal. shutdown (2) -- Specifies that the port is shutdown in state. } AlaLbdCurrentStateCVAorAR ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the state of the port, where LBD was running, after auto-recovery or issuing clear-violation-all." SYNTAX INTEGER { inactive (0), -- Specifies that the operational state is inactive. normal (1) -- Specifies that the state is normal. } -- -------------------------------------------------------------- -- Global LBD Objects -- LBD - Loop Back Detection -- -------------------------------------------------------------- alaLbdGlobalConfigStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable LBD on the switch. The value enable (1) indicates that LBD should be enabled on the switch. The value disable (2) is used to disable LBD on the switch." DEFVAL { disable } ::= { alcatelIND1LBDMIBObjects 1 } alaLbdGlobalConfigTransmissionTimer OBJECT-TYPE SYNTAX Unsigned32 ( 5 .. 600 ) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the transmission timer for LBD feature globally. It is allowed to modify the timer at any instance but the new timer value will be effective from next time the timer restarts." DEFVAL { 30 } ::= { alcatelIND1LBDMIBObjects 2 } alaLbdGlobalClearPortStat OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear statistics control for port for LBD. default(0) - default value for this object, reset(1) - indicates that LBD should clear all statistic counters related to all ports in the system." DEFVAL { default } ::= { alcatelIND1LBDMIBObjects 3 } alaLbdGlobalConfigAutorecoveryTimer OBJECT-TYPE SYNTAX Unsigned32 ( 30 .. 86400 ) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to make up all the disabled ports which was caused due to loop-back detection." DEFVAL { 300 } ::= { alcatelIND1LBDMIBObjects 4 } -- ------------------------------------------------------------- -- LBD Config Table on Physical Port -- ------------------------------------------------------------- alaLbdPortConfig OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 5 } alaLbdPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaLbdPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing LBD user port configuration information." ::= { alaLbdPortConfig 1 } alaLbdPortConfigEntry OBJECT-TYPE SYNTAX AlaLbdPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A LBD user port configuration entry." INDEX { alaLbdPortConfigIfIndex } ::= { alaLbdPortConfigTable 1 } AlaLbdPortConfigEntry ::= SEQUENCE { alaLbdPortConfigIfIndex InterfaceIndex, alaLbdPortConfigLbdAdminStatus INTEGER, alaLbdPortConfigLbdOperStatus AlaLbdPortConfigLbdOperStatus } alaLbdPortConfigIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The physical identification number for this port." ::= { alaLbdPortConfigEntry 1 } alaLbdPortConfigLbdAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable loopback-detection per port. The value enable(1) indicates that loopback-detection is enabled on this port. The value disable(2) indicates that loopback-detection is disabled on this port. The LBD configuration per port can be applied and retained, irrespective of value of alaLbdGlobalConfigStatus, but the same shall be functionally unavailable when alaLbdGlobalConfigStatus is set to disable(2)." DEFVAL { disable } ::= { alaLbdPortConfigEntry 2 } alaLbdPortConfigLbdOperStatus OBJECT-TYPE SYNTAX AlaLbdPortConfigLbdOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current operational state of the corresponding port." ::= { alaLbdPortConfigEntry 3 } -- -------------------------------------------------------------- -- Loop Back Detection Statistics Table -- -- -------------------------------------------------------------- alaLbdPortStat OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 6 } alaLbdPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaLbdPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing Loop Back Detection information." ::= { alaLbdPortStat 1 } alaLbdPortStatsEntry OBJECT-TYPE SYNTAX AlaLbdPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A LBD Statistics entry on per port." INDEX { alaLbdPortStatsIfIndex } ::= { alaLbdPortStatsTable 1 } AlaLbdPortStatsEntry ::= SEQUENCE { alaLbdPortStatsIfIndex InterfaceIndex, alaLbdPortNumLbdInvalidRcvd Counter32, alaLbdPortLbdSent Counter32, alaLbdPortStatsClear INTEGER } alaLbdPortStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of the port on which LBD is running." ::= { alaLbdPortStatsEntry 1 } alaLbdPortNumLbdInvalidRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid packets received by a port." ::= { alaLbdPortStatsEntry 2 } alaLbdPortLbdSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LBD packets sent by a port." ::= { alaLbdPortStatsEntry 3 } alaLbdPortStatsClear OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to reset(1), all statistics parameters corresponding to this port gets cleared (reset)." DEFVAL { default } ::= { alaLbdPortStatsEntry 4 } -- -------------------------------------------------------------- -- Trap Description -- -------------------------------------------------------------- alaLbdTrapsDesc OBJECT IDENTIFIER ::= { alaLbdTraps 1 } alaLbdTrapsObj OBJECT IDENTIFIER ::= { alaLbdTraps 2 } alaLbdTrapsRoot OBJECT IDENTIFIER ::= { alaLbdTrapsDesc 0 } alaLbdStateChangeToShutdown NOTIFICATION-TYPE OBJECTS { alaLbdPortIfIndex, alaLbdPreviousState, alaLbdCurrentState } STATUS current DESCRIPTION "When the port state becomes shutdown, a notification is sent to the Management Entity with the LBD-state information." ::= { alaLbdTrapsRoot 1 } alaLbdStateChangeForClearViolationAll NOTIFICATION-TYPE OBJECTS { alaLbdPortIfIndex, alaLbdPreviousStateClearViolationAll, alaLbdCurrentStateClearViolationAll } STATUS current DESCRIPTION "When the the port state changes from shutdown due to clear-violation-all, a notification is sent to the Management Entity, with the LBD-state information." ::= { alaLbdTrapsRoot 2 } alaLbdStateChangeForAutoRecovery NOTIFICATION-TYPE OBJECTS { alaLbdPortIfIndex, alaLbdPreviousStateAutoRecovery, alaLbdCurrentStateAutoRecovery } STATUS current DESCRIPTION "When the port state changes from shutdown due to auto-recovery mechanism, a notification is sent to the Management Entity with the LBD-state information." ::= { alaLbdTrapsRoot 3 } -- ---------------------------------------------------------------------- -- Trap Objects -- -- ---------------------------------------------------------------------- alaLbdPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ifIndex of the port on which LBD trap is raised" ::= { alaLbdTrapsObj 1 } alaLbdPreviousState OBJECT-TYPE SYNTAX INTEGER { normal(1) -- Specifies that the operational state is normal. } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The previous state of the port on which LBD was running." ::= { alaLbdTrapsObj 2 } alaLbdCurrentState OBJECT-TYPE SYNTAX INTEGER { shutdown (1) -- State is shutdown } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current state of the port on which LBD was running." ::= { alaLbdTrapsObj 3 } alaLbdPreviousStateClearViolationAll OBJECT-TYPE SYNTAX INTEGER { shutdown (1) -- State is shutdown } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state of the the port where LBD was running before clear-violation-all applied." ::= { alaLbdTrapsObj 4 } alaLbdCurrentStateClearViolationAll OBJECT-TYPE SYNTAX AlaLbdCurrentStateCVAorAR MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state of the the port where LBD was running after clear-violation-all applied." ::= { alaLbdTrapsObj 5 } alaLbdPreviousStateAutoRecovery OBJECT-TYPE SYNTAX INTEGER { shutdown (1) -- State is shutdown } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state of the the port where LBD was running before auto-recovery." ::= { alaLbdTrapsObj 6 } alaLbdCurrentStateAutoRecovery OBJECT-TYPE SYNTAX AlaLbdCurrentStateCVAorAR MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state of the the port where LBD was running after auto-recovery." ::= { alaLbdTrapsObj 7 } -- ------------------------------------------------------------- -- COMPLIANCE -- ------------------------------------------------------------- alcatelIND1LBDMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for LBD." MODULE MANDATORY-GROUPS { alaLbdGlobalConfigGroup, alaLbdIntfConfigGroup, alaLbdPortStatusGroup, alaLbdStateTrapToShutdownGroup, alaLbdStateTrapForClearViolationAllGroup, alaLbdStateTrapForAutoRecoveryGroup } ::= { alcatelIND1LBDMIBCompliances 1 } -- ------------------------------------------------------------- -- UNITS OF CONFORMANCE -- ------------------------------------------------------------- alaLbdGlobalConfigGroup OBJECT-GROUP OBJECTS { alaLbdGlobalConfigStatus, alaLbdGlobalConfigTransmissionTimer, alaLbdGlobalClearPortStat, alaLbdGlobalConfigAutorecoveryTimer } STATUS current DESCRIPTION "Collection of objects for management of LBD Global Configuration." ::= { alcatelIND1LBDMIBGroups 1 } alaLbdIntfConfigGroup OBJECT-GROUP OBJECTS { alaLbdPortConfigLbdAdminStatus, alaLbdPortConfigLbdOperStatus } STATUS current DESCRIPTION "Collection of objects for management of LBD per port Configuration." ::= { alcatelIND1LBDMIBGroups 2 } alaLbdPortStatusGroup OBJECT-GROUP OBJECTS { alaLbdPortNumLbdInvalidRcvd, alaLbdPortLbdSent, alaLbdPortStatsClear } STATUS current DESCRIPTION "Collection of objects for LBD Statistics information." ::= { alcatelIND1LBDMIBGroups 3 } alaLbdStateTrapToShutdownGroup OBJECT-GROUP OBJECTS { alaLbdPreviousState, alaLbdCurrentState } STATUS current DESCRIPTION "Collection of objects for LBD State change to shutdown Traps ." ::= { alcatelIND1LBDMIBGroups 4 } alaLbdStateTrapForClearViolationAllGroup OBJECT-GROUP OBJECTS { alaLbdPreviousStateClearViolationAll, alaLbdCurrentStateClearViolationAll } STATUS current DESCRIPTION "Collection of objects for LBD State Traps due to issuing clear-violation-all." ::= { alcatelIND1LBDMIBGroups 5 } alaLbdStateTrapForAutoRecoveryGroup OBJECT-GROUP OBJECTS { alaLbdPreviousStateAutoRecovery, alaLbdCurrentStateAutoRecovery } STATUS current DESCRIPTION "Collection of objects for LBD State Traps due to auto-recovery mechanism." ::= { alcatelIND1LBDMIBGroups 6 } -- ------------------------------------------------------------- END