ALCATEL-IND1-MAC-ADDRESS-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, MODULE-IDENTITY, Unsigned32 FROM SNMPv2-SMI ifIndex FROM IF-MIB MacAddress, RowStatus, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC dot1qVlanIndex FROM Q-BRIDGE-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF softentIND1MacAddress, sourceLearningTraps FROM ALCATEL-IND1-BASE; alcatelIND1MacAddressMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line, this is the MIB module for address learning mac addresses entity. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The MIB module for Source Learning Mac Address entity." ::= { softentIND1MacAddress 1} -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Hook into the Alcatel Tree -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1MacAddressMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Source Learning Module MIB Subsystem Managed Objects." ::= { alcatelIND1MacAddressMIB 1 } alcatelIND1MacAddressMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Source Learning Module MIB Subsystem Conformance Information." ::= { alcatelIND1MacAddressMIB 2 } alcatelIND1MacAddressMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Source Learning Module MIB Subsystem Units of Conformance." ::= { alcatelIND1MacAddressMIBConformance 1 } alcatelIND1MacAddressMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Source Learning Module MIB Subsystem Compliance Statements." ::= { alcatelIND1MacAddressMIBConformance 2 } -- --textual conventions -- MacAddressProtocolType ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "Protocol value should be displayed in hex format" SYNTAX INTEGER (0..2147483647) -- -- Source Learning Common Definitions -- -- -------------------------------------------------------------------------------------------- -- Following (slMacAddressTable) table is deprecated. The new table is "alaSlMacAddressGlobalTable". -- This new table will handle both VLAN and VPLS domain MAC addresses. -- The reason we keep this "slMacAddressTable" here is to be compatible with current -- existing application, say OmniVista". At some point in the future this table will be removed. -- -------------------------------------------------------------------------------------------- -- Source Learning MAC Address Table -- The Static Unicast Database for Transparent VLAN Bridges. -- Similar to the dot1qStaticUnicastTable of 802.1Q, -- It mainly allows the user to configure static Unicast -- MAC address. slMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SlMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains source addresses which can be configured as permanent (not aged out), delete on reset, delete on timeout in the MAC address table, and those dynamic learned addresses which can be viewed and deleted." ::= { alcatelIND1MacAddressMIBObjects 1 } slMacAddressEntry OBJECT-TYPE SYNTAX SlMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defninition of the Mac Addresses entries for which the switch has information. For creation of a Mac Address, the following 6 fields in slMacAddressEntry are required: ifIndex dot1qVlanIndex slMacAddress slMacAddressManagement slMacAddressDisposition slMacAddressStatus: must be set last Dynamic mac addresses can not be created manually. For deletion of a Mac Address, the following 4 fields in slMacAddressEntry are required: ifIndex dot1qVlanIndex slMacAddress slMacAddressStatus: must be set last" INDEX { ifIndex, dot1qVlanIndex, slMacAddress } ::= { slMacAddressTable 1 } SlMacAddressEntry ::= SEQUENCE { slMacAddress MacAddress, slMacAddressManagement INTEGER, slMacAddressDisposition INTEGER, slMacAddressRowStatus RowStatus, slMacAddressProtocol MacAddressProtocolType } slMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for this entry." ::= { slMacAddressEntry 1 } slMacAddressManagement OBJECT-TYPE SYNTAX INTEGER { permanent(1), deleteOnReset(2), deleteOnTimeout(3), learned(4), staticMulticast(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the management of this entry. permanent(1) - this entry is currently in use and will remain so after the user removing this entry. deleteOnReset(2) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(3) - this entry is currently in use and will remain so until it is aged out. learned(4) - this entry is currently in use and will remain so until it is aged out. staticMulticast(5) - this entry is only applicable to multicast destination addresses" DEFVAL { permanent } ::= { slMacAddressEntry 2 } slMacAddressDisposition OBJECT-TYPE SYNTAX INTEGER { bridging(1), filtering(2), quarantined(3), hostIntegrity(4), userNetworkProf(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the disposition of the entry. bridging(1) - this entry is currently in use for bridging. filtering(2) - this entry is currently in use for filtering. quarantined(3) - this entry is currently in use for quarantined mac. hostIntegrity check - the entry is currently under host integrity checking. userNetworkProf - the entry is currently under user network profile Qos. " DEFVAL { bridging } ::= { slMacAddressEntry 3 } slMacAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting the mac address." ::= { slMacAddressEntry 4 } slMacAddressProtocol OBJECT-TYPE SYNTAX MacAddressProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the protocol associated with a mac address." ::= { slMacAddressEntry 5 } -- Layer 2 Mac Address Aging Mib Table slMacAddressAgingTable OBJECT-TYPE SYNTAX SEQUENCE OF SlMacAddressAgingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of the timeout for those learned mac addresses and configured as deleted_on_timeout addresses." ::= { alcatelIND1MacAddressMIBObjects 2 } slMacAddressAgingEntry OBJECT-TYPE SYNTAX SlMacAddressAgingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the aging time for some specific vlan. For creation of the aging time, If the vlan Id is specified, then the aging time value will be applied to those mac addresses in that vlan. Otherwise, the aging time will be applied to all of the mac addresses throughout the vlans." INDEX { dot1qVlanIndex } ::= { slMacAddressAgingTable 1 } SlMacAddressAgingEntry ::= SEQUENCE { slMacAgingValue INTEGER, slMacAgingRowStatus RowStatus } slMacAgingValue OBJECT-TYPE SYNTAX INTEGER (10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the value of mac address aging time." DEFVAL { 300 } ::= { slMacAddressAgingEntry 1 } slMacAgingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting the aging time." ::= { slMacAddressAgingEntry 2 } -- layer 2 PesudoCAM Trap elements *********************** slPCamTrapObj OBJECT IDENTIFIER ::= { alcatelIND1MacAddressMIBObjects 3 } slPCAMSlotNumber OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The slot number of this Coronado." ::= { slPCamTrapObj 1 } slPCAMSliceNumber OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Slice Number of this Coronado." ::= { slPCamTrapObj 2 } slPCAMStatus OBJECT-TYPE SYNTAX INTEGER { lowWaterMark(1), highWaterMark(2), floodWaterMark(3), full(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The layer 2 pesudoCAM status of this Coronado." ::= { slPCamTrapObj 3 } slMacToPortMacTable OBJECT-TYPE SYNTAX SEQUENCE OF MacToPortMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Mac To Port Binding Mac address." ::= { alcatelIND1MacAddressMIBObjects 4 } slMacToPortMacEntry OBJECT-TYPE SYNTAX MacToPortMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac To Port Binding Mac address entry." INDEX { slMacToPortMacVlanId, slMacToPortMacAddress} ::= { slMacToPortMacTable 1 } MacToPortMacEntry ::= SEQUENCE { slMacToPortMacVlanId INTEGER, slMacToPortMacAddress MacAddress, slMacToPortMacRowStatus RowStatus } slMacToPortMacVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan Id in which the packet with this mac address is flooded" ::= { slMacToPortMacEntry 1 } slMacToPortMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A Mac address that is associated with the Mac To Port Binding." ::= { slMacToPortMacEntry 2 } slMacToPortMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This indicate whether to add or delete the mac address" ::= { slMacToPortMacEntry 3 } -- Layer 2 PesudoCAM Status Trap *********************** slPCAMStatusTrap NOTIFICATION-TYPE OBJECTS { slPCAMSlotNumber, slPCAMSliceNumber, slPCAMStatus } STATUS current DESCRIPTION "Trap Status of Layer 2 pesudoCAM on this Coronado." ::= { sourceLearningTraps 0 1 } -- BCM Table Hash Collision Traps ********************* bcmHashCollisionTrap NOTIFICATION-TYPE OBJECTS { bcmHashCollisionMac, bcmHashCollisionSlot, bcmHashCollisionPort, bcmHashCollisionVlan, bcmHashCollisionTable } STATUS current DESCRIPTION "Trap to notify the hash collision in BCM Table." ::= { sourceLearningTraps 0 3 } -- HAL Table Hash Collision Trap ********************* halHashCollisionTrap NOTIFICATION-TYPE OBJECTS { halHashCollisionMac, halHashCollisionSlot, halHashCollisionPort, halHashCollisionVlan, halHashCollisionTable } STATUS current DESCRIPTION "Trap to notify the hash collision in BCM Table." ::= { sourceLearningTraps 0 4 } -- Source Learning Global Configuration parameters slDistributedMacMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Distributed MAC Mode. When changed, the user must save the current configuration and reboot the switch for change to take effect." DEFVAL { disable } ::= { alcatelIND1MacAddressMIBObjects 5 } -- BCM Table Hash Collision Trap Parameters bcmHashCollisionTrapObj OBJECT IDENTIFIER ::= { alcatelIND1MacAddressMIBObjects 6 } -- MAC for which collision occured bcmHashCollisionMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MAC for which hash collision occured." ::= { bcmHashCollisionTrapObj 1 } -- Hash Collision on slot bcmHashCollisionSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Physical slot number on which the collision MAC is tried to add." ::= { bcmHashCollisionTrapObj 2 } -- Hash Collision on port bcmHashCollisionPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Physical port number on which the collision MAC is tried to add." ::= { bcmHashCollisionTrapObj 3 } -- Hash Collision on vlan bcmHashCollisionVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Vlan Id on which the collision MAC is tried to add." ::= { bcmHashCollisionTrapObj 4 } -- Hash Collision in Table bcmHashCollisionTable OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The BCM Table in which the collision occurred." ::= { bcmHashCollisionTrapObj 5 } -- HAL Table Hash Collision Trap Parameters halHashCollisionTrapObj OBJECT IDENTIFIER ::= { alcatelIND1MacAddressMIBObjects 10 } -- MAC for which collision occured halHashCollisionMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MAC for which hash collision occured." ::= { halHashCollisionTrapObj 1 } -- Hash Collision on slot halHashCollisionSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Physical slot number on which the collision MAC is tried to add." ::= { halHashCollisionTrapObj 2 } -- Hash Collision on port halHashCollisionPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Physical port number on which the collision MAC is tried to add." ::= { halHashCollisionTrapObj 3 } -- Hash Collision on vlan halHashCollisionVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Vlan Id on which the collision MAC is tried to add." ::= { halHashCollisionTrapObj 4 } -- Hash Collision in Table halHashCollisionTable OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The BCM Table in which the collision occurred." ::= { halHashCollisionTrapObj 5 } --layer 2 Mac Address Learning Table********************* slMacLearningControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SlMacLearningControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the control information about the mac learning on ports" ::= { alcatelIND1MacAddressMIBObjects 7} slMacLearningControlEntry OBJECT-TYPE SYNTAX SlMacLearningControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the control information about the mac learning on ports" INDEX { ifIndex } ::= { slMacLearningControlTable 1} SlMacLearningControlEntry ::= SEQUENCE { slMacLearningControlStatus INTEGER } slMacLearningControlStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of mac learning on port." DEFVAL { enabled } ::= { slMacLearningControlEntry 1} -- ------------------------------------------------------------------------ -- Following table deprecates the original "slMacAddressTable", since it is -- supports both VLAN and VPLS based MAC addresses. -- ------------------------------------------------------------------------ alaSlMacAddressGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSlMacAddressGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains MAC addresses from both Vlan and VPLS domain. This table contains source addresses which can be configured as permanent (not aged out), delete on reset, delete on timeout in the MAC address table, and those dynamic learned addresses which can be viewed and deleted." ::= { alcatelIND1MacAddressMIBObjects 8 } alaSlMacAddressGlobalEntry OBJECT-TYPE SYNTAX AlaSlMacAddressGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defninition of the Mac Addresses entries for which the switch has information. For creation of a Mac Address in VLAN domain, the following fields in slMacAddressGlobalEntry are required: slMacDomain slOriginId - IfIndex slServiceId - Vlan ID slMacAddressGbl slMacAddressGblManagement slMacAddressGblDisposition slMacAddressGblStatus: must be set last Dynamic mac addresses can not be created manually. For creation of Mac Address in VPLS domain, following fields in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP/sBind slServiceId - VPLS Service ID slOriginId - SAP - PortId; sBind - SDPID slSubId - SAP - VlanId; sBind - VcID slMacAddressGbl slMacAddressGblStatus: must be set last Dynamic mac addresses can not be created manually. For deletion of a Mac Address in VLAN domain, the following fields in alaSlMacAddressGlobalEntry are required: slMacDomain slOriginId - IfIndex slServiceId - Vlan ID slMacAddressGbl slMacAddressGblManagement slMacAddressGblStatus: must be set last For deletion of a Mac Address in vpls based, following fileds in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP/sBind slServiceId - VPLS Service ID slOriginId - SAP - PortId; sBind - SDPID slSubId - SAP - VlanId; sBind - VcID slMacAddressGbl slMacAddressGblStatus: must be set last " INDEX {slMacDomain, slLocaleType, slOriginId, slServiceId, slSubId, slMacAddressGbl} ::= {alaSlMacAddressGlobalTable 1 } AlaSlMacAddressGlobalEntry ::= SEQUENCE { slMacDomain INTEGER, slLocaleType INTEGER, slOriginId INTEGER, slServiceId INTEGER, slSubId INTEGER, slMacAddressGbl MacAddress, slMacAddressGblManagement INTEGER, slMacAddressGblDisposition INTEGER, slMacAddressGblRowStatus RowStatus, slMacAddressGblProtocol MacAddressProtocolType } slMacDomain OBJECT-TYPE SYNTAX INTEGER { all(0), vlan(1), vpls(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates whether this MAC is learned on Vlan domain or vpls domain" DEFVAL { all } ::= {alaSlMacAddressGlobalEntry 1 } slLocaleType OBJECT-TYPE SYNTAX INTEGER { default(0), sap(1), sBind(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field is used only for VPLS, It defaults to default for vlan domain MACs" DEFVAL { default } ::= {alaSlMacAddressGlobalEntry 2} slOriginId OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This should be ifIndex for Vlan domain MAC; ifIndex for SAP of VPLS domain MAC; SDP_ID for sBind of VPLS domain MAC" ::= {alaSlMacAddressGlobalEntry 3} slServiceId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Depending on the domain type, Vlan based or VPLS based. If Vlan based learning, then this field holds the Vlan ID. If VPLS based learning, then this field holds the VPLS Service ID" ::= {alaSlMacAddressGlobalEntry 4 } slSubId OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is only meaningful in VPLS domain. If SAP, this is the encapsulation ID; If sBind, this is the vcID, This value will be default to -0- in VLAN domain" ::= {alaSlMacAddressGlobalEntry 5} slMacAddressGbl OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address for this entry." ::= {alaSlMacAddressGlobalEntry 6 } slMacAddressGblManagement OBJECT-TYPE SYNTAX INTEGER { permanent(1), deleteOnReset(2), deleteOnTimeout(3), learned(4), staticMulticast(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the management of this entry. permanent(1) - this entry is currently in use and will remain so after the user removing this entry. deleteOnReset(2) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(3) - this entry is currently in use and will remain so until it is aged out. learned(4) - this entry is currently in use and will remain so until it is aged out. staticMulticast(5) - this entry is only applicable to multicast destination addresses" DEFVAL { permanent } ::= {alaSlMacAddressGlobalEntry 7 } slMacAddressGblDisposition OBJECT-TYPE SYNTAX INTEGER { bridging(1), filtering(2), quarantined(3), hostIntegrity(4), userNetworkProf(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the disposition of the entry. bridging(1) - this entry is currently in use for bridging. filtering(2) - this entry is currently in use for filtering. quarantined(3) - this entry is currently in use for quarantined mac. hostIntegritycheck(4) - the entry is currently under host integrity checking. userNetworkProf(5) - the entry is currently under user network profile Qos. " DEFVAL { bridging } ::= {alaSlMacAddressGlobalEntry 8 } slMacAddressGblRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for creating/deleting the mac address." ::= {alaSlMacAddressGlobalEntry 9 } slMacAddressGblProtocol OBJECT-TYPE SYNTAX MacAddressProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the protocol associated with a mac address." ::= {alaSlMacAddressGlobalEntry 10} -- ------------------------------------------------------------------------ -- Following table provides number of MAC addresses count for -- VPLS based MAC addresses currently in CMM FDB. -- ------------------------------------------------------------------------ -- -- slMacAddrCountInfoTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SlMacAddrCountInfoEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Definition of the Mac Addresses count for VPLS MAC addresses" -- ::= {alcatelIND1MacAddressMIBObjects 9 } -- --slMacAddrCountInfoEntry OBJECT-TYPE -- SYNTAX SlMacAddrCountInfoEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "Definition of the Mac Addresses count for VPLS MAC addresses" -- AUGMENTS {slMacAddressGlobalEntry} -- ::= {slMacAddrCountInfoTable 1} -- --SlMacAddrCountInfoEntry ::= SEQUENCE --{ -- slStaticMacCount INTEGER, -- slDynamicMacCount INTEGER --} -- --slStaticMacCount OBJECT-TYPE -- SYNTAX INTEGER (1..2147483647) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object contains the MAC address count for Static configured MACs" -- ::= {slMacAddrCountInfoEntry 1 } -- --slDynamicMacCount OBJECT-TYPE -- SYNTAX INTEGER (1..2147483647) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object contains the MAC address count for dynamic learned MACs" -- ::= {slMacAddrCountInfoEntry 2 } -- -- -- -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- COMPLIANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1MacAddressMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for source learning." MODULE MANDATORY-GROUPS { slMacAddressGroup, slMacAgingGroup, slPCamNotificationGroup, slMacGeneralGroup, slMacLearningGroup } ::= { alcatelIND1MacAddressMIBCompliances 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- UNITS OF CONFORMANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx slMacAddressGroup OBJECT-GROUP OBJECTS { slMacAddress, slMacAddressManagement, slMacAddressDisposition, slMacAddressRowStatus, slMacAddressProtocol } STATUS current DESCRIPTION "Collection of objects for management of source learning Mac addresses." ::= { alcatelIND1MacAddressMIBGroups 1 } slMacAgingGroup OBJECT-GROUP OBJECTS { slMacAgingValue, slMacAgingRowStatus } STATUS current DESCRIPTION "Collection of objects for management of source learning Mac addresses aging-time." ::= { alcatelIND1MacAddressMIBGroups 2 } slPCamNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { slPCAMStatusTrap } STATUS current DESCRIPTION "Collection of notification of signaling Pesudo CAM event." ::= { alcatelIND1MacAddressMIBGroups 3 } slMacGeneralGroup OBJECT-GROUP OBJECTS { slDistributedMacMode } STATUS current DESCRIPTION "Collection of general sl objects." ::= { alcatelIND1MacAddressMIBGroups 4 } slMacLearningGroup OBJECT-GROUP OBJECTS { slMacLearningControlStatus } STATUS current DESCRIPTION "Collection of objects for management of enabling or disabling source learning on the ports." ::= { alcatelIND1MacAddressMIBGroups 5 } -- END *********************** END