ALCATEL-IND1-MLD-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks
        FROM SNMPv2-SMI
    RowStatus
        FROM SNMPv2-TC
    InetAddressIPv6,InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    InterfaceIndex
        FROM IF-MIB
    softentIND1Mld
        FROM ALCATEL-IND1-BASE;

alcatelIND1MldMIB MODULE-IDENTITY
    LAST-UPDATED "200809100000Z" 
    ORGANIZATION "Alcatel-Lucent"
    CONTACT-INFO
        "Please consult with Customer Service to ensure the most appropriate
         version of this document is used with the products in question:
         
                    Alcatel-Lucent, Enterprise Solutions Division
                   (Formerly Alcatel Internetworking, Incorporated)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America
        
        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507
        
        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):
         
             Proprietary IPv6 Multicast MIB definitions
         
         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.
         
         No liability shall be assumed for any incidental, indirect, special,
         or consequential damages whatsoever arising from or related to this
         document or the information contained herein.
         
         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.
         
                     Copyright (C) 1995-2007 Alcatel-Lucent
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200809100000Z"
    DESCRIPTION
        "Add flood unknown object"
    REVISION      "200808080000Z"
    DESCRIPTION
        "The latest version of this MIB Module. Added maximum group limit objects."
    REVISION      "200704030000Z"
    DESCRIPTION
        "The revised version of this MIB Module."

    ::= { softentIND1Mld 1 }

alcatelIND1MldMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1MldMIB 1 }


--
--  System Configuration
--

alaMld OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 1 }

alaMldStatus OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable IPv6 multicast switching and routing 
         on the system."
    DEFVAL        { disable }
    ::= { alaMld 1 }

alaMldQuerying OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Querying on the system."
    DEFVAL        { disable }
    ::= { alaMld 2 }

alaMldSpoofing OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Spoofing on the system."
    DEFVAL        { disable }
    ::= { alaMld 3 }

alaMldZapping OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Zapping on the system."
    DEFVAL        { disable }
    ::= { alaMld 4 }

alaMldVersion OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the default MLD protocol Version running on the system."
    DEFVAL        { 1 }
    ::= { alaMld 5 }

alaMldRobustness OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Robustness variable used on the system."
    DEFVAL        { 2 }
    ::= { alaMld 6 }

alaMldQueryInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Query Interval used on the system."
    DEFVAL        { 125 }
    ::= { alaMld 7 }

alaMldQueryResponseInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliseconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Query Response Interval on the system."
    DEFVAL        { 10000 }
    ::= { alaMld 8 }

alaMldLastMemberQueryInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliseconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Last Member Query Interval on the system."
    DEFVAL        { 1000 }
    ::= { alaMld 9 }

alaMldRouterTimeout OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The MLD Router Timeout on the system."
    DEFVAL        { 90 }
    ::= { alaMld 10 }

alaMldSourceTimeout OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The MLD Source Timeout on the system."
    DEFVAL        { 30 }
    ::= { alaMld 11 }

alaMldProxying OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Proxying on the system."
    DEFVAL        { disable }
    ::= { alaMld 12 }

alaMldUnsolicitedReportInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The MLD Unsolicited Report Interval on the system."
    DEFVAL        { 1 }
    ::= { alaMld 13 }

alaMldQuerierForwarding OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Querier Forwarding on the system."
    DEFVAL        { disable }
    ::= { alaMld 14 }

alaMldMaxGroupLimit OBJECT-TYPE
    SYNTAX          Unsigned32  
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The global limit on maximum number of MLD Group memberships that can be learnt on each 
	port/vlan instance."
    DEFVAL 		{0}
    ::= { alaMld 15 }

alaMldMaxGroupExceedAction OBJECT-TYPE
    SYNTAX          INTEGER { none(0), drop(1), replace(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The global configuration of action to be taken when MLD group membership limit is exceeded on a 
	port/vlan instance."
    DEFVAL        { none }
    ::= { alaMld 16 }
alaMldFloodUnknown OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable flooding of multicast data packets during flow
    learning and setup."
    DEFVAL        { disable }
    ::= { alaMld 17 }


--
--  VLAN Configuration Table
--

alaMldVlan OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 2 }

alaMldVlanTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldVlanEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The VLAN table contains the information on which IPv6 multicast
         switching and routing is configured."
    ::= { alaMldVlan 1 }

alaMldVlanEntry OBJECT-TYPE
    SYNTAX          MldVlanEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponds to a VLAN on which IPv6 multicast switching
         and routing is configured."
    INDEX         { 
                    alaMldVlanIndex 
                  }
    ::= { alaMldVlanTable 1 }

MldVlanEntry ::= SEQUENCE {
    alaMldVlanIndex                       Unsigned32,
    alaMldVlanStatus                      INTEGER,
    alaMldVlanQuerying                    INTEGER,
    alaMldVlanSpoofing                    INTEGER,
    alaMldVlanZapping                     INTEGER,
    alaMldVlanVersion                     Unsigned32,
    alaMldVlanRobustness                  Unsigned32,
    alaMldVlanQueryInterval               Unsigned32,
    alaMldVlanQueryResponseInterval       Unsigned32,
    alaMldVlanLastMemberQueryInterval     Unsigned32,
    alaMldVlanRouterTimeout               Unsigned32,
    alaMldVlanSourceTimeout               Unsigned32,
    alaMldVlanProxying                    INTEGER,
    alaMldVlanUnsolicitedReportInterval   Unsigned32,
    alaMldVlanQuerierForwarding           INTEGER,
    alaMldVlanMaxGroupLimit  		  Unsigned32,
    alaMldVlanMaxGroupExceedAction        INTEGER,
    alaMldVlanSpoofAddressType		  InetAddressType,
    alaMldVlanSpoofAddress                InetAddress
}

alaMldVlanIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The VLAN on which IPv6 multicast switching and routing 
         is configured."
    ::= { alaMldVlanEntry 1 }

alaMldVlanStatus OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable IPv6 multicast switching and routing 
         on the VLAN."
    ::= { alaMldVlanEntry 2 }

alaMldVlanQuerying OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Querying on the VLAN."
    ::= { alaMldVlanEntry 3 }

alaMldVlanSpoofing OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Spoofing on the VLAN."
    ::= { alaMldVlanEntry 4 }

alaMldVlanZapping OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Zapping on the VLAN."
    ::= { alaMldVlanEntry 5 }

alaMldVlanVersion OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the default MLD protocol Version running on the VLAN."
    ::= { alaMldVlanEntry 6 }

alaMldVlanRobustness OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Robustness variable used on the VLAN."
    ::= { alaMldVlanEntry 7 }

alaMldVlanQueryInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Query Interval used on the VLAN."
    ::= { alaMldVlanEntry 8 }

alaMldVlanQueryResponseInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliseconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Query Response Interval on the VLAN."
    ::= { alaMldVlanEntry 9 }

alaMldVlanLastMemberQueryInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliseconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Last Member Query Interval on the VLAN."
    ::= { alaMldVlanEntry 10 }

alaMldVlanRouterTimeout OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Router Timeout on the VLAN."
    ::= { alaMldVlanEntry 11 }

alaMldVlanSourceTimeout OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Source Timeout on the VLAN."
    ::= { alaMldVlanEntry 12 }

alaMldVlanProxying OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Proxying on the VLAN."
    ::= { alaMldVlanEntry 13 }

alaMldVlanUnsolicitedReportInterval OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Set the MLD Unsolicited Report Interval on the VLAN."
    ::= { alaMldVlanEntry 14 }

alaMldVlanQuerierForwarding OBJECT-TYPE
    SYNTAX          INTEGER { none(0), enable(1), disable(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively enable MLD Querier Forwarding on the VLAN."
    ::= { alaMldVlanEntry 15 }

alaMldVlanMaxGroupLimit OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The maximum number of MLD Group memberships that can be learnt on the VLAN."
    DEFVAL 		{0}
    ::= { alaMldVlanEntry 16 }

alaMldVlanMaxGroupExceedAction OBJECT-TYPE
    SYNTAX          INTEGER { none(0), drop(1), replace(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The action to be taken when the MLD group membership limit is exceeded on the VLAN."
    DEFVAL        { none }
    ::= { alaMldVlanEntry 17 }

alaMldVlanSpoofAddressType OBJECT-TYPE
    SYNTAX          InetAddressType(1..2)
    MAX-ACCESS      read-write
    STATUS          obsolete 
    DESCRIPTION
        "Set the type of SpoofAddress for the VLAN."
    ::= { alaMldVlanEntry 18 }

alaMldVlanSpoofAddress OBJECT-TYPE   
    SYNTAX          InetAddress        
    MAX-ACCESS      read-write   
    STATUS          obsolete   
    DESCRIPTION   
        "Set the SpoofAddress for the VLAN."   
    ::= { alaMldVlanEntry 19 } 

--
--  Group Membership Table
--

alaMldMember OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 3 }

alaMldMemberTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldMemberEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the MLD group membership information."
    ::= { alaMldMember 1 }

alaMldMemberEntry OBJECT-TYPE
    SYNTAX          MldMemberEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to an MLD group membership request."
    INDEX         { 
                    alaMldMemberVlan,
                    alaMldMemberIfIndex,
                    alaMldMemberGroupAddress,
                    alaMldMemberSourceAddress
                  }
    ::= { alaMldMemberTable 1 }

MldMemberEntry ::= SEQUENCE {
    alaMldMemberVlan                      Unsigned32,
    alaMldMemberIfIndex                   InterfaceIndex,
    alaMldMemberGroupAddress              InetAddressIPv6,
    alaMldMemberSourceAddress             InetAddressIPv6,
    alaMldMemberMode                      INTEGER,
    alaMldMemberCount                     Counter32,
    alaMldMemberTimeout                   TimeTicks
}

alaMldMemberVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The group membership request's VLAN."
    ::= { alaMldMemberEntry 1 }

alaMldMemberIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The group membership request's ifIndex."
    ::= { alaMldMemberEntry 2 }

alaMldMemberGroupAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The group membership request's IPv6 group address."
    ::= { alaMldMemberEntry 3 }

alaMldMemberSourceAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The group membership request's IPv6 source address."
    ::= { alaMldMemberEntry 4 }

alaMldMemberMode OBJECT-TYPE
    SYNTAX          INTEGER { include(1), exclude(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The group membership request's MLD source filter mode."
    ::= { alaMldMemberEntry 5 }

alaMldMemberCount OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The group membership request's counter."
    ::= { alaMldMemberEntry 6 }

alaMldMemberTimeout OBJECT-TYPE
    SYNTAX          TimeTicks
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The group membership request's timeout."
    ::= { alaMldMemberEntry 7 }


--
--  Static Group Membership Table
--

alaMldStaticMember OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 4 }

alaMldStaticMemberTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldStaticMemberEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the static MLD group membership information."
    ::= { alaMldStaticMember 1 }

alaMldStaticMemberEntry OBJECT-TYPE
    SYNTAX          MldStaticMemberEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to a static MLD group membership request."
    INDEX         { 
                    alaMldStaticMemberVlan,
                    alaMldStaticMemberIfIndex,
                    alaMldStaticMemberGroupAddress
                  }
    ::= { alaMldStaticMemberTable 1 }

MldStaticMemberEntry ::= SEQUENCE {
    alaMldStaticMemberVlan                Unsigned32,
    alaMldStaticMemberIfIndex             InterfaceIndex,
    alaMldStaticMemberGroupAddress        InetAddressIPv6,
    alaMldStaticMemberRowStatus           RowStatus
}

alaMldStaticMemberVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The static group membership request's VLAN."
    ::= { alaMldStaticMemberEntry 1 }

alaMldStaticMemberIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The static group membership request's ifIndex."
    ::= { alaMldStaticMemberEntry 2 }

alaMldStaticMemberGroupAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The static group membership request's IPv6 group address."
    ::= { alaMldStaticMemberEntry 3 }

alaMldStaticMemberRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Used in accordance with installation and removal conventions
         for conceptual rows."
    ::= { alaMldStaticMemberEntry 4 }


--
--  Neighbor Table
--

alaMldNeighbor OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 5 }

alaMldNeighborTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldNeighborEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the neighboring IP multicast routers."
    ::= { alaMldNeighbor 1 }

alaMldNeighborEntry OBJECT-TYPE
    SYNTAX          MldNeighborEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to an IP multicast router."
    INDEX         { 
                    alaMldNeighborVlan,
                    alaMldNeighborIfIndex,
                    alaMldNeighborHostAddress
                  }
    ::= { alaMldNeighborTable 1 }

MldNeighborEntry ::= SEQUENCE {
    alaMldNeighborVlan                    Unsigned32,
    alaMldNeighborIfIndex                 InterfaceIndex,
    alaMldNeighborHostAddress             InetAddressIPv6,
    alaMldNeighborCount                   Counter32,
    alaMldNeighborTimeout                 TimeTicks
}

alaMldNeighborVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast router's VLAN."
    ::= { alaMldNeighborEntry 1 }

alaMldNeighborIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast router's ifIndex."
    ::= { alaMldNeighborEntry 2 }

alaMldNeighborHostAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast router's IPv6 host address."
    ::= { alaMldNeighborEntry 3 }

alaMldNeighborCount OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast router's counter."
    ::= { alaMldNeighborEntry 4 }

alaMldNeighborTimeout OBJECT-TYPE
    SYNTAX          TimeTicks
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast router's timeout."
    ::= { alaMldNeighborEntry 5 }


--
--  Static Neighbor Table
--

alaMldStaticNeighbor OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 6 }

alaMldStaticNeighborTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldStaticNeighborEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the static IP multicast routers."
    ::= { alaMldStaticNeighbor 1 }

alaMldStaticNeighborEntry OBJECT-TYPE
    SYNTAX          MldStaticNeighborEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to a static IP multicast router."
    INDEX         { 
                    alaMldStaticNeighborVlan,
                    alaMldStaticNeighborIfIndex
                  }
    ::= { alaMldStaticNeighborTable 1 }

MldStaticNeighborEntry ::= SEQUENCE {
    alaMldStaticNeighborVlan              Unsigned32,
    alaMldStaticNeighborIfIndex           InterfaceIndex,
    alaMldStaticNeighborRowStatus         RowStatus
}

alaMldStaticNeighborVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The static IP multicast router's VLAN."
    ::= { alaMldStaticNeighborEntry 1 }

alaMldStaticNeighborIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The static IP multicast router's ifIndex."
    ::= { alaMldStaticNeighborEntry 2 }

alaMldStaticNeighborRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Used in accordance with installation and removal conventions
         for conceptual rows."
    ::= { alaMldStaticNeighborEntry 3 }


--
--  Querier Table
--

alaMldQuerier OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 7 }

alaMldQuerierTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldQuerierEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the neighboring MLD queriers."
    ::= { alaMldQuerier 1 }

alaMldQuerierEntry OBJECT-TYPE
    SYNTAX          MldQuerierEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to an MLD querier."
    INDEX         { 
                    alaMldQuerierVlan,
                    alaMldQuerierIfIndex,
                    alaMldQuerierHostAddress
                  }
    ::= { alaMldQuerierTable 1 }

MldQuerierEntry ::= SEQUENCE {
    alaMldQuerierVlan                     Unsigned32,
    alaMldQuerierIfIndex                  InterfaceIndex,
    alaMldQuerierHostAddress              InetAddressIPv6,
    alaMldQuerierCount                    Counter32,
    alaMldQuerierTimeout                  TimeTicks
}

alaMldQuerierVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The MLD querier's VLAN."
    ::= { alaMldQuerierEntry 1 }

alaMldQuerierIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The MLD querier's ifIndex."
    ::= { alaMldQuerierEntry 2 }

alaMldQuerierHostAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The MLD querier's IPv6 host address."
    ::= { alaMldQuerierEntry 3 }

alaMldQuerierCount OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The MLD querier's counter."
    ::= { alaMldQuerierEntry 4 }

alaMldQuerierTimeout OBJECT-TYPE
    SYNTAX          TimeTicks
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The MLD querier's timeout."
    ::= { alaMldQuerierEntry 5 }


--
--  Static Querier Table
--

alaMldStaticQuerier OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 8 }

alaMldStaticQuerierTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldStaticQuerierEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the static MLD queriers."
    ::= { alaMldStaticQuerier 1 }

alaMldStaticQuerierEntry OBJECT-TYPE
    SYNTAX          MldStaticQuerierEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to a static MLD querier."
    INDEX         { 
                    alaMldStaticQuerierVlan,
                    alaMldStaticQuerierIfIndex
                  }
    ::= { alaMldStaticQuerierTable 1 }

MldStaticQuerierEntry ::= SEQUENCE {
    alaMldStaticQuerierVlan               Unsigned32,
    alaMldStaticQuerierIfIndex            InterfaceIndex,
    alaMldStaticQuerierRowStatus          RowStatus
}

alaMldStaticQuerierVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The static MLD querier's VLAN."
    ::= { alaMldStaticQuerierEntry 1 }

alaMldStaticQuerierIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The static MLD querier's ifIndex."
    ::= { alaMldStaticQuerierEntry 2 }

alaMldStaticQuerierRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Used in accordance with installation and removal conventions
         for conceptual rows."
    ::= { alaMldStaticQuerierEntry 3 }


--
--  Source Table
--

alaMldSource OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 9 }

alaMldSourceTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldSourceEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the IP multicast source information."
    ::= { alaMldSource 1 }

alaMldSourceEntry OBJECT-TYPE
    SYNTAX          MldSourceEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to an IP multicast source flow."
    INDEX         { 
                    alaMldSourceVlan,
                    alaMldSourceGroupAddress,
                    alaMldSourceHostAddress,
                    alaMldSourceDestAddress,
                    alaMldSourceOrigAddress
                  }
    ::= { alaMldSourceTable 1 }

MldSourceEntry ::= SEQUENCE {
    alaMldSourceVlan                      Unsigned32,
    alaMldSourceIfIndex                   InterfaceIndex,
    alaMldSourceGroupAddress              InetAddressIPv6,
    alaMldSourceHostAddress               InetAddressIPv6,
    alaMldSourceDestAddress               InetAddressIPv6,
    alaMldSourceOrigAddress               InetAddressIPv6,
    alaMldSourceType                      INTEGER
}

alaMldSourceVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast source flow's VLAN."
    ::= { alaMldSourceEntry 1 }

alaMldSourceIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast source flow's ifIndex."
    ::= { alaMldSourceEntry 2 }

alaMldSourceGroupAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast source flow's IPv6 group address."
    ::= { alaMldSourceEntry 3 }

alaMldSourceHostAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast source flow's IPv6 host address."
    ::= { alaMldSourceEntry 4 }

alaMldSourceDestAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast source flow's IPv6 tunnel destination address."
    ::= { alaMldSourceEntry 5 }

alaMldSourceOrigAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast source flow's IPv6 tunnel source address."
    ::= { alaMldSourceEntry 6 }

alaMldSourceType OBJECT-TYPE
    SYNTAX          INTEGER { mcast(1), pim(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast source flow's encapsulation type."
    ::= { alaMldSourceEntry 7 }


--
--  Forward Table
--

alaMldForward OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 10 }

alaMldForwardTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldForwardEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the IP multicast forward information."
    ::= { alaMldForward 1 }

alaMldForwardEntry OBJECT-TYPE
    SYNTAX          MldForwardEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to an IP multicast forwarded flow."
    INDEX         { 
                    alaMldForwardVlan,
                    alaMldForwardGroupAddress,
                    alaMldForwardHostAddress,
                    alaMldForwardDestAddress,
                    alaMldForwardOrigAddress,
                    alaMldForwardNextVlan,
                    alaMldForwardNextIfIndex
                  }
    ::= { alaMldForwardTable 1 }

MldForwardEntry ::= SEQUENCE {
    alaMldForwardVlan                     Unsigned32,
    alaMldForwardIfIndex                  InterfaceIndex,
    alaMldForwardGroupAddress             InetAddressIPv6,
    alaMldForwardHostAddress              InetAddressIPv6,
    alaMldForwardDestAddress              InetAddressIPv6,
    alaMldForwardOrigAddress              InetAddressIPv6,
    alaMldForwardType                     INTEGER,
    alaMldForwardNextVlan                 Unsigned32,
    alaMldForwardNextIfIndex              InterfaceIndex,
    alaMldForwardNextType                 INTEGER
}

alaMldForwardVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's VLAN."
    ::= { alaMldForwardEntry 1 }

alaMldForwardIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's ifIndex."
    ::= { alaMldForwardEntry 2 }

alaMldForwardGroupAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's IPv6 group address."
    ::= { alaMldForwardEntry 3 }

alaMldForwardHostAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's IPv6 host address."
    ::= { alaMldForwardEntry 4 }

alaMldForwardDestAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's IPv6 tunnel destination address."
    ::= { alaMldForwardEntry 5 }

alaMldForwardOrigAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's IPv6 tunnel source address."
    ::= { alaMldForwardEntry 6 }

alaMldForwardType OBJECT-TYPE
    SYNTAX          INTEGER { mcast(1), pim(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's encapsulation type."
    ::= { alaMldForwardEntry 7 }

alaMldForwardNextVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's next VLAN."
    ::= { alaMldForwardEntry 8 }

alaMldForwardNextIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's next ifIndex."
    ::= { alaMldForwardEntry 9 }

alaMldForwardNextType OBJECT-TYPE
    SYNTAX          INTEGER { mcast(1), pim(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast forwarded flow's next encapsulation type."
    ::= { alaMldForwardEntry 10 }


--
--  Tunnel Table
--

alaMldTunnel OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 11 }

alaMldTunnelTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF MldTunnelEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the IP multicast tunnel information."
    ::= { alaMldTunnel 1 }

alaMldTunnelEntry OBJECT-TYPE
    SYNTAX          MldTunnelEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to an IP multicast tunneled flow."
    INDEX         { 
                    alaMldTunnelVlan,
                    alaMldTunnelGroupAddress,
                    alaMldTunnelHostAddress,
                    alaMldTunnelDestAddress,
                    alaMldTunnelOrigAddress,
                    alaMldTunnelNextDestAddress
                  }
    ::= { alaMldTunnelTable 1 }

MldTunnelEntry ::= SEQUENCE {
    alaMldTunnelVlan                      Unsigned32,
    alaMldTunnelIfIndex                   InterfaceIndex,
    alaMldTunnelGroupAddress              InetAddressIPv6,
    alaMldTunnelHostAddress               InetAddressIPv6,
    alaMldTunnelDestAddress               InetAddressIPv6,
    alaMldTunnelOrigAddress               InetAddressIPv6,
    alaMldTunnelType                      INTEGER,
    alaMldTunnelNextDestAddress           InetAddressIPv6,
    alaMldTunnelNextType                  INTEGER
}

alaMldTunnelVlan OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's VLAN."
    ::= { alaMldTunnelEntry 1 }

alaMldTunnelIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's ifIndex."
    ::= { alaMldTunnelEntry 2 }

alaMldTunnelGroupAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's IPv6 group address."
    ::= { alaMldTunnelEntry 3 }

alaMldTunnelHostAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's IPv6 host address."
    ::= { alaMldTunnelEntry 4 }

alaMldTunnelDestAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's IPv6 tunnel destination address."
    ::= { alaMldTunnelEntry 5 }

alaMldTunnelOrigAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's IPv6 tunnel source address."
    ::= { alaMldTunnelEntry 6 }

alaMldTunnelType OBJECT-TYPE
    SYNTAX          INTEGER { mcast(1), pim(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's encapsulation type."
    ::= { alaMldTunnelEntry 7 }

alaMldTunnelNextDestAddress OBJECT-TYPE
    SYNTAX          InetAddressIPv6
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's next IPv6 tunnel destination address."
    ::= { alaMldTunnelEntry 8 }

alaMldTunnelNextType OBJECT-TYPE
    SYNTAX          INTEGER { mcast(1), pim(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The IP multicast tunneled flow's next encapsulation type."
    ::= { alaMldTunnelEntry 9 }

   
--
--  Port Table for IPv6 Multicast objects managed per port
--
		
alaMldPort  OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 12 }

alaMldPortTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF AlaMldPortEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION 
       "The table listing the IPv6 Multicast port information."   
     ::= { alaMldPort 1 }
   
alaMldPortEntry OBJECT-TYPE
     SYNTAX     AlaMldPortEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION 
       "An entry corresponding to IPv6 Multicast port information."
     INDEX        { 
                    alaMldPortIfIndex
                  }
    ::= { alaMldPortTable 1 }
   
AlaMldPortEntry ::=
     SEQUENCE {
       alaMldPortIfIndex   	  	InterfaceIndex,
       alaMldPortMaxGroupLimit   	Unsigned32,
       alaMldPortMaxGroupExceedAction   INTEGER
     }
 
alaMldPortIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IP multicast port's ifIndex."
    ::= { alaMldPortEntry 1 }

alaMldPortMaxGroupLimit OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The maximum number of MLD Group memberships that can be learnt 
	on the interface."
    DEFVAL 		{0}
    ::= { alaMldPortEntry 2 }

alaMldPortMaxGroupExceedAction OBJECT-TYPE
    SYNTAX          INTEGER { none(0), drop(1), replace(2) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The action to be taken when MLD group membership limit is 
	exceeded for the interface."
    DEFVAL        { none }
    ::= { alaMldPortEntry 3 }


--
--  Port Vlan Table
--

alaMldPortVlan OBJECT IDENTIFIER ::= { alcatelIND1MldMIBObjects 13 }

alaMldPortVlanTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF AlaMldPortVlanEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The table listing the MLD group membership limit information
	for a port/vlan instance."
    ::= { alaMldPortVlan 1 }

alaMldPortVlanEntry OBJECT-TYPE
    SYNTAX          AlaMldPortVlanEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry corresponding to MLD group membership limit on a port/vlan."
    INDEX         { 
                    alaMldPortIfIndex,
		    alaMldVlanId
                  }
    ::= { alaMldPortVlanTable 1 }

AlaMldPortVlanEntry ::= SEQUENCE {
    alaMldVlanId                        Unsigned32,
    alaMldPortVlanCurrentGroupCount     Unsigned32,
    alaMldPortVlanMaxGroupLimit 	Unsigned32,
    alaMldPortVlanMaxGroupExceedAction  INTEGER
}

alaMldVlanId 	    OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The IPv6 multicast group membership VLAN."
    ::= { alaMldPortVlanEntry 1 }

alaMldPortVlanCurrentGroupCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The current IPv6 multicast group memberships on a port/vlan 
	instance."
    ::= { alaMldPortVlanEntry 2 }

alaMldPortVlanMaxGroupLimit OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Maximum MLD Group memberships on the port/vlan instance."
    ::= { alaMldPortVlanEntry 3 }

alaMldPortVlanMaxGroupExceedAction OBJECT-TYPE
    SYNTAX          INTEGER { none(0), drop(1), replace(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The action to be taken when MLD group membership limit is
	exceeded for the port/vlan instance."
    ::= { alaMldPortVlanEntry 4 }


--
--  Conformance Table
--

alcatelIND1MldMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1MldMIB 2 }

alcatelIND1MldMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1MldMIBConformance 1 }

alaMldCompliance MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "The compliance statement for systems running IPv6 multicast switch 
         and routing and implementing ALCATEL-IND1-MLD-MIB."
    MODULE
    MANDATORY-GROUPS { alaMldGroup, alaMldVlanGroup, alaMldMemberGroup,
                       alaMldStaticMemberGroup, alaMldNeighborGroup,
                       alaMldStaticNeighborGroup, alaMldQuerierGroup,
                       alaMldStaticQuerierGroup, alaMldSourceGroup,
                       alaMldForwardGroup, alaMldTunnelGroup,
                       alaMldPortGroup, alaMldPortVlanGroup }
    ::= { alcatelIND1MldMIBCompliances 1 }

alcatelIND1MldMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1MldMIBConformance 2 }

alaMldGroup OBJECT-GROUP
    OBJECTS { alaMldStatus, alaMldQuerying, alaMldSpoofing, alaMldZapping, 
              alaMldVersion, alaMldRobustness, alaMldQueryInterval,
              alaMldQueryResponseInterval, alaMldLastMemberQueryInterval,
              alaMldRouterTimeout, alaMldSourceTimeout, alaMldProxying,
              alaMldUnsolicitedReportInterval, alaMldQuerierForwarding,
              alaMldMaxGroupLimit, alaMldMaxGroupExceedAction,
              alaMldFloodUnknown }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support management of IPv6 multicast switching
         and routing system configuration."
    ::= { alcatelIND1MldMIBGroups 1 }

alaMldVlanGroup OBJECT-GROUP
    OBJECTS { alaMldVlanStatus, alaMldVlanQuerying, alaMldVlanSpoofing, 
              alaMldVlanZapping, alaMldVlanVersion, alaMldVlanRobustness, 
              alaMldVlanQueryInterval, alaMldVlanQueryResponseInterval, 
              alaMldVlanLastMemberQueryInterval, alaMldVlanRouterTimeout, 
              alaMldVlanSourceTimeout, alaMldVlanProxying,
              alaMldVlanUnsolicitedReportInterval, alaMldVlanQuerierForwarding, 
	      alaMldVlanMaxGroupLimit, alaMldVlanMaxGroupExceedAction,
              alaMldVlanSpoofAddressType, alaMldVlanSpoofAddress }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support management of IPv6 multicast switching
         and routing vlan configuration."
    ::= { alcatelIND1MldMIBGroups 2 }

alaMldMemberGroup OBJECT-GROUP
    OBJECTS { alaMldMemberMode, alaMldMemberCount, alaMldMemberTimeout }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         group membership information."
    ::= { alcatelIND1MldMIBGroups 3 }

alaMldStaticMemberGroup OBJECT-GROUP
    OBJECTS { alaMldStaticMemberRowStatus }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         static group membership information tables."
    ::= { alcatelIND1MldMIBGroups 4 }

alaMldNeighborGroup OBJECT-GROUP
    OBJECTS { alaMldNeighborCount, alaMldNeighborTimeout }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         IP multicast router information."
    ::= { alcatelIND1MldMIBGroups 5 }

alaMldStaticNeighborGroup OBJECT-GROUP
    OBJECTS { alaMldStaticNeighborRowStatus }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         static IP multicast router information."
    ::= { alcatelIND1MldMIBGroups 6 }

alaMldQuerierGroup OBJECT-GROUP
    OBJECTS { alaMldQuerierCount, alaMldQuerierTimeout }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         MLD querier information."
    ::= { alcatelIND1MldMIBGroups 7 }

alaMldStaticQuerierGroup OBJECT-GROUP
    OBJECTS { alaMldStaticQuerierRowStatus }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         static MLD querier information."
    ::= { alcatelIND1MldMIBGroups 8 }

alaMldSourceGroup OBJECT-GROUP
    OBJECTS { alaMldSourceIfIndex, alaMldSourceType }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         IP multicast source information."
    ::= { alcatelIND1MldMIBGroups 9 }

alaMldForwardGroup OBJECT-GROUP
    OBJECTS { alaMldForwardIfIndex, alaMldForwardType, alaMldForwardNextType }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         IP multicast forward information."
    ::= { alcatelIND1MldMIBGroups 10 }

alaMldTunnelGroup OBJECT-GROUP
    OBJECTS { alaMldTunnelIfIndex, alaMldTunnelType, alaMldTunnelNextType }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching and routing 
         IP multicast tunnel information."
    ::= { alcatelIND1MldMIBGroups 11 }

alaMldPortGroup OBJECT-GROUP
    OBJECTS { alaMldPortMaxGroupLimit, alaMldPortMaxGroupExceedAction }
    STATUS          current
    DESCRIPTION
        "A collection of objects to support IPv6 multicast switching configuration."
    ::= { alcatelIND1MldMIBGroups 12 }

alaMldPortVlanGroup OBJECT-GROUP
    OBJECTS { alaMldPortVlanCurrentGroupCount, alaMldPortVlanMaxGroupLimit, alaMldPortVlanMaxGroupExceedAction }
    STATUS          current
    DESCRIPTION
        "An object to support IPv6 multicast switching group limit information 
	for a port/vlan instance."
    ::= { alcatelIND1MldMIBGroups 13 }


END