ALCATEL-IND1-ROUTEMAP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddress, InetAddressType FROM INET-ADDRESS-MIB routingIND1Iprm FROM ALCATEL-IND1-BASE ; alcatelIND1RouteMapMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IP Route Maps global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { routingIND1Iprm 3 } alcatelIND1RouteMapMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIB 1 } alaRouteMapConfig OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIBObjects 1 } -- Textual Convention AlaRouteMapType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The set of Route Map Match and Route Map Set Elements." SYNTAX INTEGER { matchIpAccesList(1), matchIpAddress(2), matchIpNextHopAccessList(3), matchIpNextHopAddress(4), matchIpv6AccessList(5), matchIpv6Address(6), matchIpv6nExtHopAccessList(7), matchIpv6NextHopAddress(8), matchTag(9), matchIpv4Interface(10), matchIpv6Interface(11), matchMetric(12), matchRouteType(13), setMetric(129), setMetricType(130), setTag(131), setCommunity(132), setLocalPreference(133), setLevel(134), setIpNexthop(135), setIpv6Nexthop(136) } AlaRouteMapAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Determines whether a Route Map or Access List address should be permitted or denied." SYNTAX INTEGER { permit(1), deny(2) } AlaRouteMapRedistControl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "allSubnets matches all subnets of this prefix. noSubnets only matches the exact prefix. aggregate matches all subnets of the prefix, but only redistributes the prefix." SYNTAX INTEGER { allSubnets(1), noSubnets(2), aggregate(3) } -- route redistribution table alaRouteMapRedistProtoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRouteMapRedistProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Protocol based configuration for route redistribution." ::= { alaRouteMapConfig 1 } alaRouteMapRedistProtoEntry OBJECT-TYPE SYNTAX AlaRouteMapRedistProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the source protocol and Route Map to be matched for route redistribution. If the route matches one of the source protocols Route Maps, and the Route Map is of type permit, then the route will be redistributed to the destination protocol." INDEX { alaRouteMapRedistSrcProtoId, alaRouteMapRedistDestProtoId, alaRouteMapRedistRouteMapIndex } ::= { alaRouteMapRedistProtoTable 1 } AlaRouteMapRedistProtoEntry ::= SEQUENCE { alaRouteMapRedistSrcProtoId INTEGER, alaRouteMapRedistDestProtoId INTEGER, alaRouteMapRedistRouteMapIndex Unsigned32, alaRouteMapRedistStatus INTEGER, alaRouteMapRedistAddressType InetAddressType, alaRouteMapRedistRowStatus RowStatus } alaRouteMapRedistSrcProtoId OBJECT-TYPE SYNTAX INTEGER { other(1), -- not specified local(2), -- local interfaces static(3), -- static routes rip(4), -- Routing Information Protocol ospf(5), -- Open Shortest Path First bgp(6), -- Border Gateway Protocol ripng(7), -- Routing Information Protocol Next Generation ospfv3(8), -- Open Shortest Path First Version 3 bgp6(9), -- Border Gateway Protocol IPv6 isis(10), -- ISIS IPv4 isis6(11) -- ISIS IPv6 } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source protocol of the route to be redistributed." DEFVAL { other } ::= { alaRouteMapRedistProtoEntry 1 } alaRouteMapRedistDestProtoId OBJECT-TYPE SYNTAX INTEGER { rip(1), -- Routing Information Protocol ospf(2) , -- Open Shortest Path First bgp(3), -- Border Gateway Protocol ripng(4), -- Routing Information Protocol Next Generation ospfv3(5), -- Open Shortest Path First Version 3 bgp6(6), -- Border Gateway Protocol isis(7), -- ISIS IPv4 isis6(8) -- ISIS IPv6 } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol that a route is distributed into." ::= { alaRouteMapRedistProtoEntry 2 } alaRouteMapRedistRouteMapIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index indicating Route Map to use for redistribution match. In the destroy case the value 0 indicates all route-maps." ::= { alaRouteMapRedistProtoEntry 3 } alaRouteMapRedistStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), -- if Route Map matches, redistribute disable(2) -- if Route Map matches, do not redistribute } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the reditribution of routes into the specified protocol." DEFVAL { enable } ::= { alaRouteMapRedistProtoEntry 4 } alaRouteMapRedistAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the source and destination protocols. The set is constrained to ipv4 and ipv6." ::= { alaRouteMapRedistProtoEntry 5 } alaRouteMapRedistRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation and deletion of Row Status entries." ::= { alaRouteMapRedistProtoEntry 6 } -- access-list name table alaRouteMapAccessListNameTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRouteMapAccessListNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing Access List name to Access List bindings." ::= { alaRouteMapConfig 2 } alaRouteMapAccessListNameEntry OBJECT-TYPE SYNTAX AlaRouteMapAccessListNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry binds an Access List Name to an Access List index." INDEX { alaRouteMapAccessListName } ::= { alaRouteMapAccessListNameTable 1 } AlaRouteMapAccessListNameEntry ::= SEQUENCE { alaRouteMapAccessListName DisplayString, alaRouteMapAccessListNameIndex Unsigned32, alaRouteMapAccessListNameAddressType InetAddressType, alaRouteMapAccessListNameRowStatus RowStatus } alaRouteMapAccessListName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of an Access List." ::= { alaRouteMapAccessListNameEntry 1 } alaRouteMapAccessListNameIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index associated with the Access List name." ::= { alaRouteMapAccessListNameEntry 2 } alaRouteMapAccessListNameAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address in this Access List. The set is constrained to ipv4 and ipv6." ::= { alaRouteMapAccessListNameEntry 3 } alaRouteMapAccessListNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation and deletion of Row Status entries." ::= { alaRouteMapAccessListNameEntry 4 } -- access-list alaRouteMapAccessListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRouteMapAccessListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all Access Lists configured on the switch." ::= { alaRouteMapConfig 3 } alaRouteMapAccessListEntry OBJECT-TYPE SYNTAX AlaRouteMapAccessListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry identifies an IPv4 or IPv6 address or subnet to match for route redistribution." INDEX { alaRouteMapAccessListIndex, alaRouteMapAccessListAddressType, alaRouteMapAccessListAddress, alaRouteMapAccessListPrefixLength } ::= { alaRouteMapAccessListTable 1 } AlaRouteMapAccessListEntry ::= SEQUENCE { alaRouteMapAccessListIndex Unsigned32, alaRouteMapAccessListAddressType InetAddressType, alaRouteMapAccessListAddress InetAddress, alaRouteMapAccessListPrefixLength Unsigned32, alaRouteMapAccessListRedistControl AlaRouteMapRedistControl, alaRouteMapAccessListAction AlaRouteMapAction, alaRouteMapAccessListRowStatus RowStatus } alaRouteMapAccessListIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index associated with the Access List name." ::= { alaRouteMapAccessListEntry 1 } alaRouteMapAccessListAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of address in this Access List Table Entry. The set is constrained to ipv4 and ipv6." ::= { alaRouteMapAccessListEntry 2 } alaRouteMapAccessListAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv4 or IPv6 address associated with this access list entry. The type is identified by alaRouteMapAccessListAddressType." ::= { alaRouteMapAccessListEntry 3 } alaRouteMapAccessListPrefixLength OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length in bits of the IPv4 or IPv6 address associated with this Access List entry. The maximum for IPv4 is 32." ::= { alaRouteMapAccessListEntry 4 } alaRouteMapAccessListRedistControl OBJECT-TYPE SYNTAX AlaRouteMapRedistControl MAX-ACCESS read-create STATUS current DESCRIPTION "Controls how a route is matched and redistributed. allSubnets matches all subnets of the prefix. noSubnets only matches the exact prefix. aggregate matches all subnets of the prefix, but only redistributes the prefix." ::= { alaRouteMapAccessListEntry 5 } alaRouteMapAccessListAction OBJECT-TYPE SYNTAX AlaRouteMapAction MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether an address should be redistributed or denied, if an Access list entry is matched." ::= { alaRouteMapAccessListEntry 6 } alaRouteMapAccessListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation and deletion of Row Status entries." ::= { alaRouteMapAccessListEntry 7 } -- route map name table alaRouteMapNameTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRouteMapNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing Route Map name to Route Map index bindings." ::= { alaRouteMapConfig 4 } alaRouteMapNameEntry OBJECT-TYPE SYNTAX AlaRouteMapNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry binds a Route Map Name to a Route Map index." INDEX { alaRouteMapName } ::= { alaRouteMapNameTable 1 } AlaRouteMapNameEntry ::= SEQUENCE { alaRouteMapName DisplayString, alaRouteMapNameIndex Unsigned32, alaRouteMapNameRowStatus RowStatus } alaRouteMapName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a Route Map." ::= { alaRouteMapNameEntry 1 } alaRouteMapNameIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index associated with the Route Map name." ::= { alaRouteMapNameEntry 2 } alaRouteMapNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation and deletion of Row Status entries." ::= { alaRouteMapNameEntry 3 } -- sequence table alaRouteMapSequenceTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRouteMapSequenceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table binds a sequence to a Route Map." ::= { alaRouteMapConfig 5 } alaRouteMapSequenceEntry OBJECT-TYPE SYNTAX AlaRouteMapSequenceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry binds a Route Map and a Sequence." INDEX { alaRouteMapSequenceIndex, alaRouteMapSequenceNumber } ::= { alaRouteMapSequenceTable 1 } AlaRouteMapSequenceEntry ::= SEQUENCE { alaRouteMapSequenceIndex Unsigned32, alaRouteMapSequenceNumber Unsigned32, alaRouteMapSequenceAction AlaRouteMapAction, alaRouteMapSequenceRowStatus RowStatus } alaRouteMapSequenceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Route Map Index." ::= { alaRouteMapSequenceEntry 1 } alaRouteMapSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Sequence Number indicating the position of sequences with the same Route Map index." DEFVAL { 50 } ::= { alaRouteMapSequenceEntry 2 } alaRouteMapSequenceAction OBJECT-TYPE SYNTAX AlaRouteMapAction MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a sequence, if matched, should be redistributed or denied." ::= { alaRouteMapSequenceEntry 3 } alaRouteMapSequenceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation and deletion of Row Status entries." ::= { alaRouteMapSequenceEntry 4 } -- route map table alaRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Protocol based configuration for route redistribution." ::= { alaRouteMapConfig 6 } alaRouteMapEntry OBJECT-TYPE SYNTAX AlaRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes a match or set clause in a Route Map." INDEX { alaRouteMapIndex, alaRouteMapSequence, alaRouteMapType, alaRouteMapValue } ::= { alaRouteMapTable 1 } AlaRouteMapEntry ::= SEQUENCE { alaRouteMapIndex Unsigned32, alaRouteMapSequence Unsigned32, alaRouteMapType AlaRouteMapType, alaRouteMapValue DisplayString, alaRouteMapRowStatus RowStatus } alaRouteMapIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index associated with the Route Map name." ::= { alaRouteMapEntry 1 } alaRouteMapSequence OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route Maps are linked together using sequence numbers. All Route Maps with the same index and with different sequence numbers are linked together and processed in order of increasing sequence number." DEFVAL { 50 } ::= { alaRouteMapEntry 2 } alaRouteMapType OBJECT-TYPE SYNTAX AlaRouteMapType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of match or set command in this entry. Route Map rows with the same Route Map Name, Sequence Number and Match/Set Type form a group. An entry within the group is uniquely identified by this Route Map Table object. Any match within the group is considered a successful match for the entire group, and matching will continue with the next group." ::= { alaRouteMapEntry 3 } alaRouteMapValue OBJECT-TYPE SYNTAX DisplayString (SIZE(1..128)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The string following the match or set keyword in a Route Map CLI command." ::= { alaRouteMapEntry 4 } alaRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation and deletion of Row Status entries." ::= { alaRouteMapEntry 5 } -- conformance information alcatelIND1RouteMapMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIB 2 } alcatelIND1RouteMapMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIBConformance 1 } alcatelIND1RouteMapMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIBConformance 2 } -- compliance statements alaRouteMapCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers running Route Maps and implementing the ALCATEL-IND1-ROUTEMAP MIB." MODULE -- this module MANDATORY-GROUPS { alaRouteMapConfigMIBGroup } ::= { alcatelIND1RouteMapMIBCompliances 1 } -- units of conformance alaRouteMapConfigMIBGroup OBJECT-GROUP OBJECTS { alaRouteMapAccessListNameIndex, alaRouteMapAccessListNameAddressType, alaRouteMapAccessListNameRowStatus, alaRouteMapAccessListRedistControl, alaRouteMapAccessListAction, alaRouteMapAccessListRowStatus, alaRouteMapNameIndex, alaRouteMapNameRowStatus, alaRouteMapSequenceAction, alaRouteMapSequenceRowStatus, alaRouteMapRowStatus } STATUS current DESCRIPTION "A collection of objects to support management of global configuration parameters of the Route Map Module." ::= { alcatelIND1RouteMapMIBGroups 1 } END