ALCATEL-IND1-SAA-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-GROUP,MODULE-COMPLIANCE FROM SNMPv2-CONF DateAndTime, DisplayString, TruthValue, RowStatus, MacAddress FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB softentIND1Saa FROM ALCATEL-IND1-BASE Dot1agCfmMaintDomainName, Dot1agCfmMaintAssocName FROM IEEE8021-CFM-MIB; alcatelIND1SaaMIB MODULE-IDENTITY LAST-UPDATED "200907210000Z" -- 07/21/2009 00:00GMT ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel Internetworking, Incorporated (Division 1, Formerly XYLAN Corporation) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://www.ind.alcatel.com File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Service Assurance agent. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE" REVISION "200907210000Z" DESCRIPTION "The mib for SAA module" ::= { softentIND1Saa 1} -- -------------------------------------------------------------- -- -- Sections of the Saa MIB -- -------------------------------------------------------------- alcatelIND1SaaNotifications OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Saa Notifications." ::= { alcatelIND1SaaMIB 0 } alcatelIND1SaaMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Saa Objects." ::= { alcatelIND1SaaMIB 1 } alcatelIND1SaaMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Saa Module MIB Subsystem Conformance Information." ::= { alcatelIND1SaaMIB 2 } alcatelIND1SaaMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Saa Module MIB Subsystem Units of Conformance." ::= { alcatelIND1SaaMIBConformance 1 } alcatelIND1SaaMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Saa Module MIB Subsystem Compliance Statements." ::= { alcatelIND1SaaMIBConformance 2 } -- -------------------------------------------------------------- -- DESCRIPTION: -- "control table data for the Saa Module. -- " -- -------------------------------------------------------------- alaSaaCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 1 } alaSaaCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSaaCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the SAA control table for providing, via SNMP, the capability of performing SAA test operations. " ::= { alaSaaCtrlConfig 1 } alaSaaCtrlEntry OBJECT-TYPE SYNTAX AlaSaaCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alaSaaCtrlTable table, containing information on the Saa function for a single instance of the Saa. " INDEX { alaSaaCtrlOwnerIndex, alaSaaCtrlTestIndex } ::= { alaSaaCtrlTable 1 } AlaSaaCtrlEntry ::= SEQUENCE { alaSaaCtrlOwnerIndex SnmpAdminString, alaSaaCtrlTestIndex SnmpAdminString, alaSaaCtrlRowStatus RowStatus, alaSaaCtrlDescr DisplayString, alaSaaCtrlAdminStatus INTEGER, alaSaaCtrlTestMode INTEGER, alaSaaCtrlRuns Counter32, alaSaaCtrlFailures Counter32, alaSaaCtrlLastRunResult INTEGER, alaSaaCtrlLastRunTime DateAndTime, alaSaaCtrlInterval Integer32, alaSaaCtrlStartAt DateAndTime, alaSaaCtrlStopAt DateAndTime, alaSaaCtrlMaxHistoryRows Integer32 } alaSaaCtrlOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Owner name to identify entries in the table. This is currently not supported and its value will always be the string 'USER'. " DEFVAL { "USER" } ::= { alaSaaCtrlEntry 1 } alaSaaCtrlTestIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique name to identify the entries in the table. The name is unique across various SNMP users. " ::= { alaSaaCtrlEntry 2 } alaSaaCtrlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the table. " ::= { alaSaaCtrlEntry 3 } alaSaaCtrlDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "User provided description string for the SAA. " DEFVAL { "DEFAULT" } ::= { alaSaaCtrlEntry 4 } alaSaaCtrlAdminStatus OBJECT-TYPE SYNTAX INTEGER { start(0), stop(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates wether to start or stop the SAA test. " ::= { alaSaaCtrlEntry 5 } alaSaaCtrlTestMode OBJECT-TYPE SYNTAX INTEGER { undefined(0), ipSaa(1), ethSaa(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of SAA test to be performed. The undefined value corresponds to the case when an entry is created in the alaSaaCtrlTable table without specifying a value for this object. This value shall be updated when the user creates an entry for the corresponding saa in the alaSaaIpCtrlTable table or alaSaaEthoamCtrlTable table. " DEFVAL { undefined } ::= { alaSaaCtrlEntry 6 } alaSaaCtrlRuns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of times SAA test has been executed. " ::= { alaSaaCtrlEntry 7 } alaSaaCtrlFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of times this SAA test has failed. " ::= { alaSaaCtrlEntry 8 } alaSaaCtrlLastRunResult OBJECT-TYPE SYNTAX INTEGER { undetermined(0), success(1), failed(2), aborted(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the latest SAA test iteration. " ::= { alaSaaCtrlEntry 9 } alaSaaCtrlLastRunTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the last iteration of the SAA was run. " ::= { alaSaaCtrlEntry 10 } alaSaaCtrlInterval OBJECT-TYPE SYNTAX Integer32 (10..1500) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Interval, in minutes, between two iterations of the SAA test. " DEFVAL { 150 } ::= { alaSaaCtrlEntry 11 } alaSaaCtrlStartAt OBJECT-TYPE SYNTAX DateAndTime (SIZE(8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the time at which the SAA test is to be started. The deci-seconds specified in DateAndTime has no significance in scheduling SAA. The year in DateAndTime must be in the range from 1970 to 2037. " ::= { alaSaaCtrlEntry 12 } alaSaaCtrlStopAt OBJECT-TYPE SYNTAX DateAndTime (SIZE(8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the time at which the SAA test is to be stopped.Special value for DataAndTime which is 9999-12-31,23:59:59.0 is used to reset the existing configured value of this object, indicating that the SAA test should never stop. The deci-seconds in the DateAndTime has no significance in scheduling SAA.The year in DateAndTime must be in the range from 1970 to 2037. " ::= { alaSaaCtrlEntry 13 } alaSaaCtrlMaxHistoryRows OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum number of iterations for which history data is maintained. " DEFVAL { 5 } ::= { alaSaaCtrlEntry 14 } -- *************************************************************** -- DESCRIPTION: -- "control table data for the Ip-Saa. -- " -- *************************************************************** alaSaaIpCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 2 } alaSaaIpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSaaIpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It defines the ping Control Table for providing the ping capability via SNMP. The results of these tests are stored in the alaSaaIpResultsTable and alaSaaIpHistoryTable. " ::= { alaSaaIpCtrlConfig 1 } alaSaaIpCtrlEntry OBJECT-TYPE SYNTAX AlaSaaIpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for the alaSaaIpCtrl table. " INDEX { alaSaaIpCtrlOwnerIndex, alaSaaIpCtrlTestIndex } ::= { alaSaaIpCtrlTable 1 } AlaSaaIpCtrlEntry ::= SEQUENCE { alaSaaIpCtrlOwnerIndex SnmpAdminString, alaSaaIpCtrlTestIndex SnmpAdminString, alaSaaIpCtrlRowStatus RowStatus, alaSaaIpCtrlTestMode INTEGER, alaSaaIpCtrlTgtAddrType InetAddressType, alaSaaIpCtrlTgtAddress InetAddress, alaSaaIpCtrlSrcAddrType InetAddressType, alaSaaIpCtrlSrcAddress InetAddress, alaSaaIpCtrlPayloadSize Integer32, alaSaaIpCtrlNumPkts Integer32, alaSaaIpCtrlInterPktDelay Integer32, alaSaaIpCtrlTypeOfService Integer32, alaSaaIpCtrlVRFId Integer32, alaSaaIpCtrlTotalPktsSent Counter32, alaSaaIpCtrlTotalPktsRcvd Counter32, alaSaaIpCtrlMinRTT Integer32, alaSaaIpCtrlAvgRTT Integer32, alaSaaIpCtrlMaxRTT Integer32, alaSaaIpCtrlMinJitter Integer32, alaSaaIpCtrlAvgJitter Integer32, alaSaaIpCtrlMaxJitter Integer32, alaSaaIpCtrlTSMinRTT DateAndTime, alaSaaIpCtrlTSMaxRTT DateAndTime, alaSaaIpCtrlTSMinJitter DateAndTime, alaSaaIpCtrlTSMaxJitter DateAndTime } alaSaaIpCtrlOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Owner name to identify entries in the table. This is currently not supported and its value will always be the string 'USER'. " DEFVAL { "USER" } ::= { alaSaaIpCtrlEntry 1 } alaSaaIpCtrlTestIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique name to identify the entries in the table. This name is unique across various SNMP users. " ::= { alaSaaIpCtrlEntry 2 } alaSaaIpCtrlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Allows entries to be created and deleted in the table. createAndWait value is not supported for this object. " ::= { alaSaaIpCtrlEntry 3 } alaSaaIpCtrlTestMode OBJECT-TYPE SYNTAX INTEGER { icmpEcho(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of ping test defined by this entry. " ::= { alaSaaIpCtrlEntry 4 } alaSaaIpCtrlTgtAddrType OBJECT-TYPE SYNTAX InetAddressType(1) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the InetAddress type of host address to be used as the destination for performing a ping operation. InetAddressIPv4(1) is the only type currently supported. " DEFVAL { 1 } ::= { alaSaaIpCtrlEntry 5 } alaSaaIpCtrlTgtAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the IP host address to be used as the destination for performing a ping operation. " ::= { alaSaaIpCtrlEntry 6 } alaSaaIpCtrlSrcAddrType OBJECT-TYPE SYNTAX InetAddressType(1) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the InetAddress type of host address to be used as the source for performing a ping operation. InetAddressIPv4(1) is the only type currently supported. " DEFVAL { 1 } ::= { alaSaaIpCtrlEntry 7 } alaSaaIpCtrlSrcAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the IP host address to be used as the source for performing a ping operation. The default value of this object is 0.0.0.0 if alaSaaIpCtrlSrcAddrType is set to ipv4. " ::= { alaSaaIpCtrlEntry 8 } alaSaaIpCtrlPayloadSize OBJECT-TYPE SYNTAX Integer32 (24..1472) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the size of the ICMP payload to be used for the ping operation. " DEFVAL { 24 } ::= { alaSaaIpCtrlEntry 9 } alaSaaIpCtrlNumPkts OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the number of packets to be sent in one ping iteration. " DEFVAL { 5 } ::= { alaSaaIpCtrlEntry 10 } alaSaaIpCtrlInterPktDelay OBJECT-TYPE SYNTAX Integer32 (100..1000) UNITS "milli-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the delay between two consecutive packets transmitted during a ping iteration.The value specified should be a multiple of 100. " DEFVAL { 1000 } ::= { alaSaaIpCtrlEntry 11 } alaSaaIpCtrlTypeOfService OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of service " DEFVAL { 0 } ::= { alaSaaIpCtrlEntry 12 } alaSaaIpCtrlVRFId OBJECT-TYPE SYNTAX Integer32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the VRF ID. Only the value '0' is currently supported. " ::= { alaSaaIpCtrlEntry 13 } alaSaaIpCtrlTotalPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total number of packets sent during all the ping iterations. " ::= { alaSaaIpCtrlEntry 14 } alaSaaIpCtrlTotalPktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total number of packets received during all the ping iterations. " ::= { alaSaaIpCtrlEntry 15 } alaSaaIpCtrlMinRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the minimum round trip time among all the iterations of the SAA. " ::= { alaSaaIpCtrlEntry 16 } alaSaaIpCtrlAvgRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the average round trip time of all the iterations of the SAA. " ::= { alaSaaIpCtrlEntry 17 } alaSaaIpCtrlMaxRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum round trip time among all the iterations of the SAA. " ::= { alaSaaIpCtrlEntry 18 } alaSaaIpCtrlMinJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the minimum jitter among all the iterations of the SAA. " ::= { alaSaaIpCtrlEntry 19 } alaSaaIpCtrlAvgJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the average jitter of all the iterations of the SAA. " ::= { alaSaaIpCtrlEntry 20 } alaSaaIpCtrlMaxJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum jitter among all the iterations of the SAA. " ::= { alaSaaIpCtrlEntry 21 } alaSaaIpCtrlTSMinRTT OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the timestamp of the iteration that gave the minimum packet delay. " ::= { alaSaaIpCtrlEntry 22 } alaSaaIpCtrlTSMaxRTT OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the timestamp of the iteration that gave the maximum packet delay. " ::= { alaSaaIpCtrlEntry 23 } alaSaaIpCtrlTSMinJitter OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the timestamp of the iteration that gave the minimum packet jitter. " ::= { alaSaaIpCtrlEntry 24 } alaSaaIpCtrlTSMaxJitter OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the timestamp of the iteration that gave the maximum packet jitter. " ::= { alaSaaIpCtrlEntry 25 } -- *************************************************************** -- DESCRIPTION: -- "Results table data for the Ip-Saa. -- " -- *************************************************************** alaSaaIpResults OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 3 } alaSaaIpResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSaaIpResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the IP Results Table for providing the capability of performing IP Ping operations. The results of these operations are stored in the alaSaaIpResultsTable and the alaSaaIpHistoryTable. An entry is removed from the alaSaaIpResultsTable when its corresponding alaSaaCtrlEntry is deleted. " ::= { alaSaaIpResults 1 } alaSaaIpResultsEntry OBJECT-TYPE SYNTAX AlaSaaIpResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for the alaSaaResults table. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaIpCtrlTable. " INDEX { alaSaaIpCtrlOwnerIndex, alaSaaIpCtrlTestIndex, alaSaaIpResultsTestRunIndex } ::= { alaSaaIpResultsTable 1 } AlaSaaIpResultsEntry ::= SEQUENCE { alaSaaIpResultsTestRunIndex Unsigned32, alaSaaIpResultsPktsSent Counter32, alaSaaIpResultsPktsRcvd Counter32, alaSaaIpResultsInterPktDelay Integer32, alaSaaIpResultsRunResult INTEGER, alaSaaIpResultsRunResultReason OCTET STRING, alaSaaIpResultsRunTime DateAndTime, alaSaaIpResultsMinRTT Integer32, alaSaaIpResultsAvgRTT Integer32, alaSaaIpResultsMaxRTT Integer32, alaSaaIpResultsMinJitter Integer32, alaSaaIpResultsAvgJitter Integer32, alaSaaIpResultsMaxJitter Integer32 } alaSaaIpResultsTestRunIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of alaSaaIpResultsTestRunIndex identifies the row entry that reports results for a single OAM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows. " ::= { alaSaaIpResultsEntry 1 } alaSaaIpResultsPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of packets sent during a single ping iteration. " ::= { alaSaaIpResultsEntry 2 } alaSaaIpResultsPktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of packets received during a single ping iteration. " ::= { alaSaaIpResultsEntry 3 } alaSaaIpResultsInterPktDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the inter-packet-delay with which the packets were sent in the iteration. " ::= { alaSaaIpResultsEntry 4 } alaSaaIpResultsRunResult OBJECT-TYPE SYNTAX INTEGER { undetermined(0), success(1), failed(2), aborted(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the iteration. " ::= { alaSaaIpResultsEntry 5 } alaSaaIpResultsRunResultReason OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. " ::= { alaSaaIpResultsEntry 6 } alaSaaIpResultsRunTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time at which the iteraton was run. " ::= { alaSaaIpResultsEntry 7 } alaSaaIpResultsMinRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum round trip time. " ::= { alaSaaIpResultsEntry 8 } alaSaaIpResultsAvgRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average round trip time. " ::= { alaSaaIpResultsEntry 9 } alaSaaIpResultsMaxRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum round trip time. " ::= { alaSaaIpResultsEntry 10 } alaSaaIpResultsMinJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minumum jitter value. " ::= { alaSaaIpResultsEntry 11 } alaSaaIpResultsAvgJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average jitter value. " ::= { alaSaaIpResultsEntry 12 } alaSaaIpResultsMaxJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum jitter value " ::= { alaSaaIpResultsEntry 13 } -- *************************************************************** -- DESCRIPTION: -- "Data for the stats history" -- *************************************************************** alaSaaIpHistory OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 4 } alaSaaIpHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSaaIpHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is the table for storing the results of a ping operation. An entry in this table is created when a ping operation is performed. Entries are removed from this table when its corresponding alaSaaCtrlEntry is deleted. " ::= { alaSaaIpHistory 1 } alaSaaIpHistoryEntry OBJECT-TYPE SYNTAX AlaSaaIpHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the alaSaaIpHistory table. " INDEX { alaSaaIpCtrlOwnerIndex, alaSaaIpCtrlTestIndex, alaSaaIpResultsTestRunIndex, alaSaaIpHistoryIndex } ::= { alaSaaIpHistoryTable 1 } AlaSaaIpHistoryEntry ::= SEQUENCE { alaSaaIpHistoryIndex Unsigned32, alaSaaIpHistoryPktRTT Integer32, alaSaaIpHistoryPktJitter Integer32 } alaSaaIpHistoryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created when the result of a ping iteration is determined. The initial 2 instance identifier index values identify the alaSaaIpPingCtrlEntry that a ping iteration result (alaSaaIpHistoryEntry) belongs to. The alaSaaIpHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to a maximum of alaSaaIpCtrlNumPkts. " ::= { alaSaaIpHistoryEntry 1 } alaSaaIpHistoryPktRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round trip time taken by a single packet in an iteration. " ::= { alaSaaIpHistoryEntry 2 } alaSaaIpHistoryPktJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The jitter value for a single packet in an iteration. " ::= { alaSaaIpHistoryEntry 3 } -- *************************************************************** -- DESCRIPTION: -- "control table data for the Eth-Saa. -- " -- *************************************************************** alaSaaEthoamCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 5 } alaSaaEthoamCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSaaEthoamCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the table for providing, via SNMP, the capability of performing Ethernet Loopback and DMM test operations. The results of these tests are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable." ::= { alaSaaEthoamCtrlConfig 1 } alaSaaEthoamCtrlEntry OBJECT-TYPE SYNTAX AlaSaaEthoamCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the alaSaaEthoamCtrlTable. " INDEX { alaSaaEthoamCtrlOwnerIndex, alaSaaEthoamCtrlTestIndex } ::= { alaSaaEthoamCtrlTable 1 } AlaSaaEthoamCtrlEntry ::= SEQUENCE { alaSaaEthoamCtrlOwnerIndex SnmpAdminString, alaSaaEthoamCtrlTestIndex SnmpAdminString, alaSaaEthoamCtrlRowStatus RowStatus, alaSaaEthoamCtrlTestMode INTEGER, alaSaaEthoamCtrlTgtMepId Integer32, alaSaaEthoamCtrlTgtMAC MacAddress, alaSaaEthoamCtrlSrcMepId Integer32, alaSaaEthoamCtrlDomainName Dot1agCfmMaintDomainName, alaSaaEthoamCtrlAssociationName Dot1agCfmMaintAssocName, alaSaaEthoamCtrlPktTimeOut Integer32, alaSaaEthoamCtrlNumPkts Integer32, alaSaaEthoamCtrlInterPktDelay Integer32, alaSaaEthoamCtrlPktData OCTET STRING, alaSaaEthoamCtrlVlanPriority Integer32, alaSaaEthoamCtrlDropEligible TruthValue, alaSaaEthoamCtrlTotalPktsRcvd Unsigned32, alaSaaEthoamCtrlTotalPktsSent Unsigned32, alaSaaEthoamCtrlMinRTT Integer32, alaSaaEthoamCtrlAvgRTT Integer32, alaSaaEthoamCtrlMaxRTT Integer32, alaSaaEthoamCtrlMinJitter Integer32, alaSaaEthoamCtrlAvgJitter Integer32, alaSaaEthoamCtrlMaxJitter Integer32, alaSaaEthoamCtrlTSMinRTT DateAndTime, alaSaaEthoamCtrlTSMaxRTT DateAndTime, alaSaaEthoamCtrlTSMinJitter DateAndTime, alaSaaEthoamCtrlTSMaxJitter DateAndTime } alaSaaEthoamCtrlOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "Owner name to identify entries in the table. This is currently not supported and its value will always be the string 'USER'. " DEFVAL { "USER" } ::= { alaSaaEthoamCtrlEntry 1 } alaSaaEthoamCtrlTestIndex OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique name to identify the entries in the table. This name is unique across various SNMP users. " ::= { alaSaaEthoamCtrlEntry 2 } alaSaaEthoamCtrlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the alaSaaEthoamCtrlTable. Deletion of an entry in this table results in all corresponding (same alaSaaEthoamCtrlOwnerIndex and alaSaaEthoamCtrlTestIndex index values) alaSaaEthoamResultsTable and alaSaaEthoamHistoryTable entries being deleted." ::= { alaSaaEthoamCtrlEntry 3 } alaSaaEthoamCtrlTestMode OBJECT-TYPE SYNTAX INTEGER { ethernetLoopback (1), ethernetDmm (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of Ethernet OAM test defined by this entry. ethernetLoopback - tests connectivity and round trip time by sending loopback requests. ethernetDmm - tests connectivity and round trip time by sending timestamped packets. " ::= { alaSaaEthoamCtrlEntry 4 } alaSaaEthoamCtrlTgtMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Mep-Id of the destination to which the Ethernet Loopback or DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry. " ::= { alaSaaEthoamCtrlEntry 5 } alaSaaEthoamCtrlTgtMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Target MAC Address of the destination to which the Ethernet Loopback or DMM message is to be sent: A unicast destination MAC address. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry. " ::= { alaSaaEthoamCtrlEntry 6 } alaSaaEthoamCtrlSrcMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Mep-Id of the source node initiating the Ethernet Loopback or DMM message." ::= { alaSaaEthoamCtrlEntry 7 } alaSaaEthoamCtrlDomainName OBJECT-TYPE SYNTAX Dot1agCfmMaintDomainName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the domain to which the source Mep belongs. " ::= { alaSaaEthoamCtrlEntry 8 } alaSaaEthoamCtrlAssociationName OBJECT-TYPE SYNTAX Dot1agCfmMaintAssocName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the association in the domain (specified by alaSaaEthoamCtrlDomainName) to which the source Mep belongs. " ::= { alaSaaEthoamCtrlEntry 9 } alaSaaEthoamCtrlPktTimeOut OBJECT-TYPE SYNTAX Integer32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum time to wait for the reply of the transmitted packet. " ::= { alaSaaEthoamCtrlEntry 10 } alaSaaEthoamCtrlNumPkts OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of packets to be sent in one iteration of Eth-LB/DMM test. " ::= { alaSaaEthoamCtrlEntry 11 } alaSaaEthoamCtrlInterPktDelay OBJECT-TYPE SYNTAX Integer32 (100..1000) UNITS "milli-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100. " ::= { alaSaaEthoamCtrlEntry 12 } alaSaaEthoamCtrlPktData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent." ::= { alaSaaEthoamCtrlEntry 13 } alaSaaEthoamCtrlVlanPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. " ::= { alaSaaEthoamCtrlEntry 14 } alaSaaEthoamCtrlDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame." DEFVAL { false } ::= { alaSaaEthoamCtrlEntry 15 } alaSaaEthoamCtrlTotalPktsRcvd OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total number of packets received during all the Eth-LB/DMM iterations." ::= { alaSaaEthoamCtrlEntry 16 } alaSaaEthoamCtrlTotalPktsSent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total number of packets sent during all the Eth-LB/DMM iterations." ::= { alaSaaEthoamCtrlEntry 17 } alaSaaEthoamCtrlMinRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the minimum round trip time among all the iterations of the SAA. " ::= { alaSaaEthoamCtrlEntry 18 } alaSaaEthoamCtrlAvgRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the average round trip time of all the iterations of the SAA. " ::= { alaSaaEthoamCtrlEntry 19 } alaSaaEthoamCtrlMaxRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum round trip time among all the iterations of the SAA. " ::= { alaSaaEthoamCtrlEntry 20 } alaSaaEthoamCtrlMinJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the minimum jitter among all the iterations of the SAA. " ::= { alaSaaEthoamCtrlEntry 21 } alaSaaEthoamCtrlAvgJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the average jitter of all the iterations of the SAA. " ::= { alaSaaEthoamCtrlEntry 22 } alaSaaEthoamCtrlMaxJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum jitter among all the iterations of the SAA. " ::= { alaSaaEthoamCtrlEntry 23 } alaSaaEthoamCtrlTSMinRTT OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the iteration that gave the minimum packet delay." ::= { alaSaaEthoamCtrlEntry 24 } alaSaaEthoamCtrlTSMaxRTT OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the iteration that gave the maximum packet delay." ::= { alaSaaEthoamCtrlEntry 25 } alaSaaEthoamCtrlTSMinJitter OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the iteration that gave the minimum packet jitter." ::= { alaSaaEthoamCtrlEntry 26 } alaSaaEthoamCtrlTSMaxJitter OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the iteration that gave the maximum packet jitter." ::= { alaSaaEthoamCtrlEntry 27 } -- *************************************************************** -- DESCRIPTION: -- "Results table data for the Eth-Saa. -- " -- *************************************************************** alaSaaEthoamResults OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 6 } alaSaaEthoamResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSaaEthoamResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Ethoam Results Table for providing the capability of performing Eth-LB/DMM operations. The results of these operations are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable. An entry is removed from the alaSaaEthoamResultsTable when its corresponding alaSaaCtrlEntry is deleted." ::= { alaSaaEthoamResults 1 } alaSaaEthoamResultsEntry OBJECT-TYPE SYNTAX AlaSaaEthoamResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the alaSaaEthoamResultsTable. The alaSaaEthoamResultsTable has the same indexing as the alaSaaEthoamCtrlTable in order for a alaSaaEthoamResultsEntry to correspond to the alaSaaEthoamCtrlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaEthoamCtrlTable." INDEX { alaSaaEthoamCtrlOwnerIndex, alaSaaEthoamCtrlTestIndex, alaSaaEthoamResultsTestRunIndex } ::= { alaSaaEthoamResultsTable 1 } AlaSaaEthoamResultsEntry ::= SEQUENCE { alaSaaEthoamResultsTestRunIndex Unsigned32, alaSaaEthoamResultsPktsSent Unsigned32, alaSaaEthoamResultsPktsRcvd Unsigned32, alaSaaEthoamResultsInterPktDelay Integer32, alaSaaEthoamResultsRunResult INTEGER, alaSaaEthoamResultsRunResultReason OCTET STRING, alaSaaEthoamResultsRunTime DateAndTime, alaSaaEthoamResultsMinRTT Integer32, alaSaaEthoamResultsAvgRTT Integer32, alaSaaEthoamResultsMaxRTT Integer32, alaSaaEthoamResultsMinJitter Integer32, alaSaaEthoamResultsAvgJitter Integer32, alaSaaEthoamResultsMaxJitter Integer32 } alaSaaEthoamResultsTestRunIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of alaSaaEthoamResultsTestRunIndex identifies the row entry that reports results for a single Eth-LB/DMM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows." ::= { alaSaaEthoamResultsEntry 1 } alaSaaEthoamResultsPktsSent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of packets sent during a single Eth-LB/DMM iteration." ::= { alaSaaEthoamResultsEntry 2 } alaSaaEthoamResultsPktsRcvd OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of packets received during a single Eth-LB/DMM iteration" ::= { alaSaaEthoamResultsEntry 3 } alaSaaEthoamResultsInterPktDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the inter-packet-delay with which the packets were sent in the iteration. " ::= { alaSaaEthoamResultsEntry 4 } alaSaaEthoamResultsRunResult OBJECT-TYPE SYNTAX INTEGER { undetermined(0), success(1), failed(2), aborted(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the Eth-LB/DMM iteration." ::= { alaSaaEthoamResultsEntry 5 } alaSaaEthoamResultsRunResultReason OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. " ::= { alaSaaEthoamResultsEntry 6 } alaSaaEthoamResultsRunTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time at which the iteraton was run. " ::= { alaSaaEthoamResultsEntry 7 } alaSaaEthoamResultsMinRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum round trip time." ::= { alaSaaEthoamResultsEntry 8 } alaSaaEthoamResultsAvgRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average round trip time. " ::= { alaSaaEthoamResultsEntry 9 } alaSaaEthoamResultsMaxRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum round trip time. " ::= { alaSaaEthoamResultsEntry 10 } alaSaaEthoamResultsMinJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum jitter value. " ::= { alaSaaEthoamResultsEntry 11 } alaSaaEthoamResultsAvgJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average jitter value. " ::= { alaSaaEthoamResultsEntry 12 } alaSaaEthoamResultsMaxJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum jitter value. " ::= { alaSaaEthoamResultsEntry 13 } -- *************************************************************** -- DESCRIPTION: -- "History table data for the Eth-Saa. -- " -- *************************************************************** alaSaaEthoamHistory OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 7 } alaSaaEthoamHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSaaEthoamHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of an Eth-LB/DMM iteration. The number of entries in this table for a configured test are limited by the value of the corresponding alaSaaEthoamCtrlMaxRows object. An entry in this table is created when the result of an Eth-LB/DMM test is determined. An entry is removed from this table when its corresponding alaSaaEthoamCtrlEntry is deleted. The agent removes the oldest entry for a test in the alaSaaEthoamHistoryTable to allow the addition of a new entry for that test once the number of rows in the alaSaaEthoamHistoryTable reaches the value specified by alaSaaEthoamCtrlMaxRows." ::= { alaSaaEthoamHistory 1 } alaSaaEthoamHistoryEntry OBJECT-TYPE SYNTAX AlaSaaEthoamHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alaSaaEthoamCtrlOwnerIndex, alaSaaEthoamCtrlTestIndex, alaSaaEthoamResultsTestRunIndex, alaSaaEthoamHistoryIndex } ::= { alaSaaEthoamHistoryTable 1 } AlaSaaEthoamHistoryEntry ::= SEQUENCE { alaSaaEthoamHistoryIndex Unsigned32, alaSaaEthoamHistoryPktRTT Integer32, alaSaaEthoamHistoryPktJitter Integer32 } alaSaaEthoamHistoryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created when the result of an Eth-LB/DMM iteration is determined. The initial 2 instance identifier index values identify the alaSaaEthoamCtrlEntry that an Eth-LB/DMM iteration result (alaSaaEthoamHistoryEntry) belongs to. The alaSaaEthoamHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to a maximum of alaSaaEthoamCtrlNumPkts." ::= { alaSaaEthoamHistoryEntry 1 } alaSaaEthoamHistoryPktRTT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round trip time taken by a single packet in an iteration. " ::= { alaSaaEthoamHistoryEntry 2 } alaSaaEthoamHistoryPktJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The jitter value for a single packet in an iteration. " ::= { alaSaaEthoamHistoryEntry 3 } -- ------------------------------------------------------------- -- COMPLIANCE -- ------------------------------------------------------------- alcatelIND1SaaMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Saa." MODULE MANDATORY-GROUPS { alaSaaCtrlConfigGroup, alaSaaIpCtrlConfigGroup, alaSaaIpResultsGroup, alaSaaIpHistoryGroup, alaSaaEthoamCtrlConfigGroup, alaSaaEthoamResultsGroup, alaSaaEthoamHistoryGroup } ::= { alcatelIND1SaaMIBCompliances 1 } -- ------------------------------------------------------------- -- UNITS OF CONFORMANCE -- ------------------------------------------------------------- alaSaaCtrlConfigGroup OBJECT-GROUP OBJECTS { alaSaaCtrlRowStatus, alaSaaCtrlDescr, alaSaaCtrlAdminStatus, alaSaaCtrlTestMode, alaSaaCtrlRuns, alaSaaCtrlFailures, alaSaaCtrlLastRunResult, alaSaaCtrlLastRunTime, alaSaaCtrlInterval, alaSaaCtrlStartAt, alaSaaCtrlStopAt, alaSaaCtrlMaxHistoryRows } STATUS current DESCRIPTION "Collection of objects for management of Saa control Group." ::= { alcatelIND1SaaMIBGroups 1 } alaSaaIpCtrlConfigGroup OBJECT-GROUP OBJECTS { alaSaaIpCtrlRowStatus, alaSaaIpCtrlTestMode, alaSaaIpCtrlTgtAddrType, alaSaaIpCtrlTgtAddress, alaSaaIpCtrlSrcAddrType, alaSaaIpCtrlSrcAddress, alaSaaIpCtrlPayloadSize, alaSaaIpCtrlNumPkts, alaSaaIpCtrlInterPktDelay, alaSaaIpCtrlTypeOfService, alaSaaIpCtrlVRFId, alaSaaIpCtrlTotalPktsSent, alaSaaIpCtrlTotalPktsRcvd, alaSaaIpCtrlMinRTT, alaSaaIpCtrlAvgRTT, alaSaaIpCtrlMaxRTT, alaSaaIpCtrlMinJitter, alaSaaIpCtrlAvgJitter, alaSaaIpCtrlMaxJitter, alaSaaIpCtrlTSMinRTT, alaSaaIpCtrlTSMaxRTT, alaSaaIpCtrlTSMinJitter, alaSaaIpCtrlTSMaxJitter } STATUS current DESCRIPTION "Collection of objects for management of Saa Ip Configuration Table." ::= { alcatelIND1SaaMIBGroups 2 } alaSaaIpResultsGroup OBJECT-GROUP OBJECTS { alaSaaIpResultsPktsSent, alaSaaIpResultsPktsRcvd, alaSaaIpResultsInterPktDelay, alaSaaIpResultsRunResult, alaSaaIpResultsRunResultReason, alaSaaIpResultsRunTime, alaSaaIpResultsMinRTT, alaSaaIpResultsAvgRTT, alaSaaIpResultsMaxRTT, alaSaaIpResultsMinJitter, alaSaaIpResultsAvgJitter, alaSaaIpResultsMaxJitter } STATUS current DESCRIPTION "Collection of objects for management of Saa Ip Results Table." ::= { alcatelIND1SaaMIBGroups 3 } alaSaaIpHistoryGroup OBJECT-GROUP OBJECTS { alaSaaIpHistoryPktRTT, alaSaaIpHistoryPktJitter } STATUS current DESCRIPTION "Collection of objects for management of Saa Ip history table." ::= { alcatelIND1SaaMIBGroups 4 } alaSaaEthoamCtrlConfigGroup OBJECT-GROUP OBJECTS { alaSaaEthoamCtrlRowStatus, alaSaaEthoamCtrlTestMode, alaSaaEthoamCtrlTgtMepId, alaSaaEthoamCtrlTgtMAC, alaSaaEthoamCtrlSrcMepId, alaSaaEthoamCtrlDomainName, alaSaaEthoamCtrlAssociationName, alaSaaEthoamCtrlPktTimeOut, alaSaaEthoamCtrlNumPkts, alaSaaEthoamCtrlInterPktDelay, alaSaaEthoamCtrlPktData, alaSaaEthoamCtrlVlanPriority, alaSaaEthoamCtrlDropEligible, alaSaaEthoamCtrlTotalPktsRcvd, alaSaaEthoamCtrlTotalPktsSent, alaSaaEthoamCtrlMinRTT, alaSaaEthoamCtrlAvgRTT, alaSaaEthoamCtrlMaxRTT, alaSaaEthoamCtrlMinJitter, alaSaaEthoamCtrlAvgJitter, alaSaaEthoamCtrlMaxJitter, alaSaaEthoamCtrlTSMinRTT, alaSaaEthoamCtrlTSMaxRTT, alaSaaEthoamCtrlTSMinJitter, alaSaaEthoamCtrlTSMaxJitter } STATUS current DESCRIPTION "Collection of objects for management of Saa Ethoam Configuration Table." ::= { alcatelIND1SaaMIBGroups 5 } alaSaaEthoamResultsGroup OBJECT-GROUP OBJECTS { alaSaaEthoamResultsPktsSent, alaSaaEthoamResultsPktsRcvd, alaSaaEthoamResultsInterPktDelay, alaSaaEthoamResultsRunResult, alaSaaEthoamResultsRunResultReason, alaSaaEthoamResultsRunTime, alaSaaEthoamResultsMinRTT, alaSaaEthoamResultsAvgRTT, alaSaaEthoamResultsMaxRTT, alaSaaEthoamResultsMinJitter, alaSaaEthoamResultsAvgJitter, alaSaaEthoamResultsMaxJitter } STATUS current DESCRIPTION "Collection of objects for management of Saa Ethoam Results Table." ::= { alcatelIND1SaaMIBGroups 6 } alaSaaEthoamHistoryGroup OBJECT-GROUP OBJECTS { alaSaaEthoamHistoryPktRTT, alaSaaEthoamHistoryPktJitter } STATUS current DESCRIPTION "Collection of objects for management of Saa Ethoam history table." ::= { alcatelIND1SaaMIBGroups 7 } END