ALCATEL-IND1-SESSION-MGR-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-IDENTITY,
	OBJECT-TYPE,
	NOTIFICATION-TYPE,
	IpAddress            FROM SNMPv2-SMI
	DisplayString,
	RowStatus            FROM SNMPv2-TC
        MODULE-COMPLIANCE,
	OBJECT-GROUP,
	NOTIFICATION-GROUP   FROM SNMPv2-CONF
	softentIND1Sesmgr,
	switchMgtTraps       FROM ALCATEL-IND1-BASE;

alcatelIND1SessionMgrMIB MODULE-IDENTITY
	LAST-UPDATED "200704030000Z"
	ORGANIZATION "Alcatel-Lucent"
	CONTACT-INFO
	    "Please consult with Customer Service to ensure the most appropriate
	     version of this document is used with the products in question:

			Alcatel-Lucent, Enterprise Solutions Division
		       (Formerly Alcatel Internetworking, Incorporated)
			       26801 West Agoura Road
			    Agoura Hills, CA  91301-5122
			      United States Of America

	    Telephone:               North America  +1 800 995 2696
				     Latin America  +1 877 919 9526
				     Europe         +31 23 556 0100
				     Asia           +65 394 7933
				     All Other      +1 818 878 4507

	    Electronic Mail:         support@ind.alcatel.com
	    World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
	    File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
	DESCRIPTION
	    "This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):

                 For the Birds Of Prey Product Line
                 User Sessions Manager Subsystem.

             The right to make changes in specification and other information
             contained in this document without prior notice is reserved.

             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.

             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.

                         Copyright (C) 1995-2007 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"
	::= { softentIND1Sesmgr 1}

    alcatelIND1SessionMgrMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Session Manager Subsystem Managed Objects."
        ::= { alcatelIND1SessionMgrMIB 1 }


    alcatelIND1SessionMgrMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Session Manager Subsystem Conformance Information."
        ::= { alcatelIND1SessionMgrMIB 2 }


    alcatelIND1SessionMgrMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Session Manager Subsystem Units Of Conformance."
        ::= { alcatelIND1SessionMgrMIBConformance 1 }


    alcatelIND1SessionMgrMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Session Manager Subsystem Compliance Statements."
        ::= { alcatelIND1SessionMgrMIBConformance 2 }

    sessionMgr  OBJECT IDENTIFIER ::= { alcatelIND1SessionMgrMIBObjects 1 }

-- Session configuration table

	sessionConfigTable  OBJECT-TYPE
	    SYNTAX  SEQUENCE OF SessionConfigEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
	    DESCRIPTION
		"The configuration parameters of a user session."
	    ::= { sessionMgr 1 }

	sessionConfigEntry  OBJECT-TYPE
	    SYNTAX  SessionConfigEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
	    DESCRIPTION
		"An entry of the session configuration table."
	    INDEX { sessionType }
	    ::= { sessionConfigTable 1 }

	SessionConfigEntry ::= SEQUENCE {
	    sessionType			INTEGER,
	    sessionBannerFileName	DisplayString,
	    sessionInactivityTimerValue	INTEGER,
	    sessionDefaultPromptString	DisplayString
	    }

	sessionType  OBJECT-TYPE
	    SYNTAX  INTEGER {
		cli (1),
		http (2),
		ftp (3),
		snmp (4)
	    }
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The type of the session interface."
	    ::= { sessionConfigEntry 1 }

	sessionBannerFileName  OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..255))
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"Optional Banner File Name.
		For CLI, HTTP, and FTP sessions only."
            DEFVAL  { "" }
	    ::= { sessionConfigEntry 2 }

	sessionInactivityTimerValue  OBJECT-TYPE
	    SYNTAX  INTEGER (1..596523)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The inactivity timer value for this type
		of session, in minutes."
            DEFVAL  { 4 }
	    ::= { sessionConfigEntry 3 }

	sessionDefaultPromptString  OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..31))
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"Prompt string.
		For CLI sessions only."
            DEFVAL  { "-> " }
	    ::= { sessionConfigEntry 4 }


-- Session active table

	sessionActiveTable  OBJECT-TYPE
	    SYNTAX  SEQUENCE OF SessionActiveEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
	    DESCRIPTION
		"A list of active users sessions."
	    ::= { sessionMgr 2 }

	sessionActiveEntry  OBJECT-TYPE
	    SYNTAX  SessionActiveEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
	    DESCRIPTION
		"An entry in the session active table."
	    INDEX { sessionIndex }
	    ::= { sessionActiveTable 1 }

	SessionActiveEntry ::= SEQUENCE {
	    sessionIndex		INTEGER,
	    sessionAccessType		INTEGER,
	    sessionPhysicalPort		INTEGER,
	    sessionUserName		DisplayString,
	    sessionUserReadPrivileges	OCTET STRING,
	    sessionUserWritePrivileges	OCTET STRING,
	    sessionUserProfileName  	DisplayString,
	    sessionUserIpAddress	IpAddress,
	    sessionRowStatus		RowStatus
	    }

	sessionIndex  OBJECT-TYPE
	    SYNTAX  INTEGER (0..63)
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The index of the session."
	    ::= { sessionActiveEntry 1 }

	sessionAccessType  OBJECT-TYPE
	    SYNTAX  INTEGER {
		console (1),
		telnet (2),
		ftp (3),
		http (4),
		ssh (5)
	    }
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The access type of the session."
	    ::= { sessionActiveEntry 2 }

	sessionPhysicalPort  OBJECT-TYPE
	    SYNTAX  INTEGER {
		notSignificant (0),
		emp (1),
		ni (2),
		local (3)
	    }
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The physical port type of the session.
		notSignificant : use for console port or
		when information is not available,
		emp : ethernet port on the CMM board,
		ni : ethernet port on a NI coupler board."
	    ::= { sessionActiveEntry 3 }

	sessionUserName  OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..31))
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The user name of the user logged-in."
	    ::= { sessionActiveEntry 4 }

	sessionUserReadPrivileges  OBJECT-TYPE
	    SYNTAX  OCTET STRING (SIZE (8))
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The read privileges of the user logged-in.
		These privileges are stored as a bitmap.
		Each bit represents a command family.
		The number of families may go up to 64.
		Applied for functional authorization
		(partitioned management)."
	    ::= { sessionActiveEntry 5 }

	sessionUserWritePrivileges  OBJECT-TYPE
	    SYNTAX  OCTET STRING (SIZE (8))
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The write privileges of the user logged-in.
		These privileges are stored as a bitmap.
		Each bit represents a command family.
		The number of families may go up to 64.
		Applied for functional authorization
		(partitioned management)."
	    ::= { sessionActiveEntry 6 }

	sessionUserProfileName  OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..31))
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The profile name of the user logged-in.
		Applied for the end-user partitioned management."
	    ::= { sessionActiveEntry 7 }

	sessionUserIpAddress  OBJECT-TYPE
	    SYNTAX  IpAddress
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The IP address of the user logged-in."
	    ::= { sessionActiveEntry 8 }

	sessionRowStatus  OBJECT-TYPE
	    SYNTAX  RowStatus
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The status of this table entry.
		An entry in this table is dynamically created when a user
		connects to the switch (through console, telnet, ftp or http).
		The only value supported for set is destroy(6),
		to kill a user session."
	    ::= { sessionActiveEntry 9 }


-- Session login timout

	sessionLoginTimeout  OBJECT-TYPE
	    SYNTAX  INTEGER (5..600)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"At login time, it is the time in seconds to get
		the password, after the username has been keyed in."
            DEFVAL  { 55 }
	    ::= { sessionMgr 3 }

-- Session login attempt

	sessionLoginAttempt  OBJECT-TYPE
	    SYNTAX  INTEGER (1..10)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The maximum number of login attempts for one session."
            DEFVAL  { 3 }
	    ::= { sessionMgr 4 }

-- CLI command log enable

	sessionCliCommandLogEnable  OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enable(1),
	    	disable(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"CLI command logging status. Enable(1) will save all CLI set command
		activilies on flash memory. Disable(2) will stop the record"
            DEFVAL  { disable }
	    ::= { sessionMgr 5 }

-- Session XonXoff enable

	sessionXonXoffEnable  OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enable(1),
	    	disable(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"Enable or disable xon-xoff flow control on console port"
            DEFVAL  { disable }
	    ::= { sessionMgr 6 }



--
-- Trap description
--

switchMgtTrapsDesc  OBJECT IDENTIFIER ::= { switchMgtTraps 1 }
switchMgtTrapsObj  OBJECT IDENTIFIER ::= { switchMgtTraps 2 }

    sessionAuthenticationTrap  NOTIFICATION-TYPE
        OBJECTS {
	    sessionAccessType,
	    sessionUserName,
	    sessionUserIpAddress,
	    sessionAuthFailure
	}
	STATUS  current
        DESCRIPTION
	    "Authentication Failure Trap is sent each time a user
	    authentication is refused."
	::= {switchMgtTrapsDesc 0 1 }

--
-- Object used in the trap
--

	sessionAuthFailure  OBJECT-TYPE
	    SYNTAX  INTEGER {
		unknownUser (1)
	    }
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The reason why the user authentication failed."
	    ::= { switchMgtTrapsObj 1 }


--
-- Compliance Statements
--

    alcatelIND1SessionMgrMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for Session Manager Subsystem."
        MODULE  -- this module
            MANDATORY-GROUPS
            {
                sessionConfigGroup,
                sessionActiveGroup,
                sessionTrapsGroup
            }

        ::= { alcatelIND1SessionMgrMIBCompliances 1 }


--
-- Units Of Conformance
--

    sessionConfigGroup OBJECT-GROUP
        OBJECTS
        {
	    sessionType,           -- Session configuration table
	    sessionBannerFileName,
	    sessionInactivityTimerValue,
	    sessionDefaultPromptString
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for management of Session Manager."
        ::= { alcatelIND1SessionMgrMIBGroups 1 }


    sessionActiveGroup OBJECT-GROUP
        OBJECTS
        {
	    sessionIndex,          -- Active users session table
	    sessionAccessType,
	    sessionPhysicalPort,
	    sessionUserName,
	    sessionUserReadPrivileges,
	    sessionUserWritePrivileges,
	    sessionUserProfileName,
	    sessionUserIpAddress,
	    sessionRowStatus
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for management of users sessions."
        ::= { alcatelIND1SessionMgrMIBGroups 2 }


    sessionTrapsGroup NOTIFICATION-GROUP
	NOTIFICATIONS {
	    sessionAuthenticationTrap
	}
        STATUS  current
        DESCRIPTION
            "Collection of Traps for management of users sessions."
        ::= { alcatelIND1SessionMgrMIBGroups 3 }


END