ALCATEL-IND1-TRAP-MGR-MIB DEFINITIONS ::= BEGIN

IMPORTS
	OBJECT-TYPE,
	MODULE-IDENTITY,
	OBJECT-IDENTITY,
	IpAddress,
	Unsigned32,
	NOTIFICATION-TYPE 	FROM SNMPv2-SMI
	RowStatus,
	DisplayString 		FROM SNMPv2-TC
        MODULE-COMPLIANCE,
	OBJECT-GROUP,
	NOTIFICATION-GROUP 	FROM SNMPv2-CONF
	softentIND1TrapMgr,
	trapMgrTraps 		FROM ALCATEL-IND1-BASE
        InetAddressType, InetAddress    FROM INET-ADDRESS-MIB;


alcatelIND1TrapMgrMIB  MODULE-IDENTITY
	LAST-UPDATED  "200708070000Z"
	ORGANIZATION "Alcatel-Lucent"
	CONTACT-INFO
	    "Please consult with Customer Service to ensure the most appropriate
	     version of this document is used with the products in question:
 
			Alcatel-Lucent, Enterprise Solutions Division
		       (Formerly Alcatel Internetworking, Incorporated)
			       26801 West Agoura Road
			    Agoura Hills, CA  91301-5122
			      United States Of America
	
	    Telephone:               North America  +1 800 995 2696
				     Latin America  +1 877 919 9526
				     Europe         +31 23 556 0100
				     Asia           +65 394 7933
				     All Other      +1 818 878 4507
	
	    Electronic Mail:         support@ind.alcatel.com
	    World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
	    File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
	DESCRIPTION
	    "This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):
         
                 For the Birds Of Prey Product Line
                 Trap Manager Subsystem.
         
             The right to make changes in specification and other information
             contained in this document without prior notice is reserved.
         
             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.
         
             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.
         
                         Copyright (C) 1995-2007 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"

	REVISION      "200708070000Z"
        DESCRIPTION
            "The latest version of this MIB Module."
	::= { softentIND1TrapMgr 1 }


    alcatelIND1TrapMgrMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Trap Manager Subsystem Managed Objects."
        ::= { alcatelIND1TrapMgrMIB 1 }


    alcatelIND1TrapMgrMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Trap Manager Subsystem Conformance Information."
        ::= { alcatelIND1TrapMgrMIB 2 }


    alcatelIND1TrapMgrMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Trap Manager Subsystem Units Of Conformance."
        ::= { alcatelIND1TrapMgrMIBConformance 1 }


    alcatelIND1TrapMgrMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For SNMP Agent Subsystem Compliance Statements."
        ::= { alcatelIND1TrapMgrMIBConformance 2 }

-- 
-- Trap Manager configuration
-- 

trapMgt  OBJECT IDENTIFIER ::= { alcatelIND1TrapMgrMIBObjects 1 }


trapConfigTable  OBJECT-TYPE
	SYNTAX  SEQUENCE OF TrapConfigEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The trap configuration table."
	::= { trapMgt 1 }

trapConfigEntry  OBJECT-TYPE
	SYNTAX  TrapConfigEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A trap configuration entry."
	INDEX { trapIndex }
	::= { trapConfigTable 1 }

TrapConfigEntry ::= SEQUENCE {
	trapIndex		INTEGER,
	trapName		DisplayString,
	trapFamily		DisplayString, 
	trapAbsorbPeriod	INTEGER}

trapIndex  OBJECT-TYPE
	SYNTAX  INTEGER (0..1024)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Trap identifier."
	::= { trapConfigEntry 1 }

trapName  OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (1..64))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Trap name."
	::= { trapConfigEntry 2 }

trapFamily  OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (1..64))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Trap family name."
	::= { trapConfigEntry 3 }

trapAbsorbPeriod  OBJECT-TYPE
	SYNTAX  INTEGER (0..3600)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"at maximum, one instance of this trap
		 is sent out within the period.
		 value 0 : the trap is not absorbed."
	::= { trapConfigEntry 4 }


trapStationTable  OBJECT-TYPE
	SYNTAX  SEQUENCE OF TrapStationEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A list of management stations."
	::= { trapMgt 2 }

trapStationEntry  OBJECT-TYPE
	SYNTAX  TrapStationEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A management station entry."
	INDEX { trapStationIP }
	::= { trapStationTable 1 }

TrapStationEntry ::= SEQUENCE {
	trapStationIP		IpAddress,
	trapStationPort		Unsigned32,
	trapStationRowStatus	RowStatus,
	trapStationProtocol	INTEGER,
	trapStationUser		DisplayString,
	trapStationReplay	Unsigned32,
	trapStationNextSeq	Unsigned32 }

trapStationIP  OBJECT-TYPE
	SYNTAX  IpAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The IP address of this management entity."
	::= { trapStationEntry 1 }

trapStationPort  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The UDP port used by this management entity.
		 This defaults to the SNMP-TRAP port 162."
	DEFVAL { 162 }
	::= { trapStationEntry 2 }

trapStationRowStatus  OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Reading or writting values :
		 - active (1) : traps enabled to the station
		 - notInService (2) : traps disabled to the station
		 Only reading values :
		 - notReady (3) : missing parameters for the station
		 Only writting values :
		 - createAndGo (4) : to create an active station
		 - createAndWait (5) : to create a notInService station
		 - destroy (6) : to remove a station."
	::= { trapStationEntry 3 }
 
trapStationProtocol  OBJECT-TYPE
	SYNTAX  INTEGER {
		v1 (1),
		v2 (2),
		v3 (3) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The type of protocol used to send the traps
		 to the station.
		 The different values are :
		 v1 : the traps are sent using SNMPv1.
		 v2 : the traps are sent using SNMPv2.
		 v3 : the traps are sent using SNMPv3."
	DEFVAL { v3 }
	::= { trapStationEntry 4 }

trapStationUser  OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (1..32))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"User name used to send the trap to the station.
		 This name must correspond to an existing user
		 account name."
	::= { trapStationEntry 5 }

trapStationReplay  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The replay value. The switch is required
		 to send the last known traps for this station 
		 from the replay value."
	DEFVAL { 0 }
	::= { trapStationEntry 6 }


trapStationNextSeq  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The sequence number of the next trap generated
		 for this station."
	DEFVAL { 0 }
	::= { trapStationEntry 7 }


trapFilterTable  OBJECT-TYPE
	SYNTAX  SEQUENCE OF TrapFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The trap filtering table for each individual trap."
	::= { trapMgt 3 }

trapFilterEntry  OBJECT-TYPE
	SYNTAX  TrapFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A trap filter entry."
	INDEX { trapStationIP, trapIndex }
	::= { trapFilterTable 1 }

TrapFilterEntry ::= SEQUENCE {
	trapFilterStatus	INTEGER }

trapFilterStatus  OBJECT-TYPE
	SYNTAX  INTEGER { on(1), off(2) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"For the individual filtering :
		 on :  the filter is activated, the traps identified
		       by trapFilterId can not be sent to the SNMP
		       manager identified by trapStationIP.
		 off : no filter is activated."
	DEFVAL { off }
	::= { trapFilterEntry 1 }


trapAbsorption OBJECT-TYPE
	SYNTAX  INTEGER {
		enable(1),
		disable(2) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"enable : the trap absorption service is enabled
		 disable : the trap absorption service is disabled."
	DEFVAL { enable }
	::= { trapMgt 4 }

trapToWebView OBJECT-TYPE
	SYNTAX  INTEGER {
		enable(1),
		disable(2) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"enable : the traps are forwarded to WebView
		 disable : the traps are not forwarded to WebView."
	DEFVAL { enable }
	::= { trapMgt 5 }


alaTrapInetStationTable  OBJECT-TYPE
	SYNTAX  SEQUENCE OF AlaTrapInetStationEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A list of management stations."
	::= { trapMgt 6 }

alaTrapInetStationEntry  OBJECT-TYPE
	SYNTAX  AlaTrapInetStationEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A management station entry."
	INDEX { alaTrapInetStationIPType, alaTrapInetStationIP }
	::= { alaTrapInetStationTable 1 }

AlaTrapInetStationEntry ::= SEQUENCE {
	alaTrapInetStationIPType	InetAddressType,
	alaTrapInetStationIP		InetAddress,
	alaTrapInetStationPort		Unsigned32,
	alaTrapInetStationRowStatus	RowStatus,
	alaTrapInetStationProtocol	INTEGER,
	alaTrapInetStationUser		DisplayString,
	alaTrapInetStationReplay	Unsigned32,
	alaTrapInetStationNextSeq	Unsigned32 }

alaTrapInetStationIPType  OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The value of alaTrapInetStationIPType indicates the IP 
 	address type for alaTrapInetStationIP."
	::= { alaTrapInetStationEntry 1 }

alaTrapInetStationIP  OBJECT-TYPE
	SYNTAX  InetAddress (SIZE (4 | 16))
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The IP address of this management entity. The address type of 
 	alaTrapInetStationIP is indicated by alaTrapInetStationIPType."
	::= { alaTrapInetStationEntry 2 }

alaTrapInetStationPort  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-create
	STATUS  current
	DESCRIPTION
		"The UDP port used by this management entity.
		 This defaults to the SNMP-TRAP port 162."
	DEFVAL { 162 }
	::= { alaTrapInetStationEntry 3 }

alaTrapInetStationRowStatus  OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS  read-create
	STATUS  current
	DESCRIPTION
		"Reading or writting values :
		 - active (1) : traps enabled to the station
		 - notInService (2) : traps disabled to the station
		 Only reading values :
		 - notReady (3) : missing parameters for the station
		 Only writting values :
		 - createAndGo (4) : to create an active station
		 - createAndWait (5) : to create a notInService station
		 - destroy (6) : to remove a station."
	::= { alaTrapInetStationEntry 4 }
 
alaTrapInetStationProtocol  OBJECT-TYPE
	SYNTAX  INTEGER {
		v1 (1),
		v2 (2),
		v3 (3) }
	MAX-ACCESS  read-create
	STATUS  current
	DESCRIPTION
		"The type of protocol used to send the traps
		 to the station.
		 The different values are :
		 v1 : the traps are sent using SNMPv1.
		 v2 : the traps are sent using SNMPv2.
		 v3 : the traps are sent using SNMPv3."
	DEFVAL { v3 }
	::= { alaTrapInetStationEntry 5 }

alaTrapInetStationUser  OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (1..32))
	MAX-ACCESS  read-create
	STATUS  current
	DESCRIPTION
		"User name used to send the trap to the station.
		 This name must correspond to an existing user
		 account name."
	::= { alaTrapInetStationEntry 6 }

alaTrapInetStationReplay  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-create
	STATUS  current
	DESCRIPTION
		"The replay value. The switch is required
		 to send the last known traps for this station 
		 from the replay value."
	DEFVAL { 0 }
	::= { alaTrapInetStationEntry 7 }


alaTrapInetStationNextSeq  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The sequence number of the next trap generated
		 for this station."
	DEFVAL { 0 }
	::= { alaTrapInetStationEntry 8 }


alaTrapInetFilterTable  OBJECT-TYPE
	SYNTAX  SEQUENCE OF AlaTrapInetFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The trap filtering table for each individual trap."
	::= { trapMgt 7 }

alaTrapInetFilterEntry  OBJECT-TYPE
	SYNTAX  AlaTrapInetFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A trap filter entry."
	INDEX { alaTrapInetStationIPType, alaTrapInetStationIP, trapIndex }
	::= { alaTrapInetFilterTable 1 }

AlaTrapInetFilterEntry ::= SEQUENCE {
	alaTrapInetFilterStatus	INTEGER }

alaTrapInetFilterStatus  OBJECT-TYPE
	SYNTAX  INTEGER { on(1), off(2) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"For the individual filtering :
		 on :  the filter is activated, the traps identified
		       by trapFilterId can not be sent to the SNMP
		       manager identified by alaTrapInetStationIP.
		 off : no filter is activated."
	DEFVAL { off }
	::= { alaTrapInetFilterEntry 1 }


--
-- Trap description
--

trapAbsorptionTrap  NOTIFICATION-TYPE
	OBJECTS
	{
		trapAbsorStamp,
		trapAbsorTrapId,
		trapAbsorCounter,
		trapAbsorTime
	}
	STATUS  current
	DESCRIPTION
		"The absorption Trap is sent when a trap has been
		 absorbed at least once."
	::= { trapMgrTraps 0 1 }

--
-- Objects used in the absorption trap
--

trapNotif  OBJECT IDENTIFIER ::= { alcatelIND1TrapMgrMIBObjects 3 }

trapAbsorStamp  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The time stamp of the absorbed trap."
	::= { trapNotif 1 }

trapAbsorTrapId  OBJECT-TYPE
	SYNTAX  INTEGER (0..1024)
	MAX-ACCESS  accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The trap identifier of the absorbed trap."
	::= { trapNotif 2 }

trapAbsorCounter  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  accessible-for-notify
	STATUS  current
	DESCRIPTION   
		"The number of the iterations of the absorbed trap."
	::= { trapNotif 3 }

trapAbsorTime  OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The time stamp of the last iteration."
	::= { trapNotif 4 }


--
-- Compliance Statements
--

    alcatelIND1TrapMgrMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for Trap Manager Subsystem."
        MODULE  -- this module

            MANDATORY-GROUPS
            {
                trapMgtGroup,
                trapTrapsGroup,
                trapNotifGroup
            }

        ::= { alcatelIND1TrapMgrMIBCompliances 1 }


--
-- Units Of Conformance
--

     trapMgtGroup OBJECT-GROUP
        OBJECTS
        {
	    trapIndex,
	    trapName,
	    trapFamily,
	    trapAbsorbPeriod,
	    trapStationIP,
	    trapStationPort,
	    trapStationRowStatus,
	    trapStationProtocol,
	    trapStationUser,
	    trapStationReplay,
	    trapStationNextSeq,
	    trapFilterStatus,
	    trapAbsorption,
	    trapToWebView,
	    alaTrapInetStationPort,
	    alaTrapInetStationRowStatus,
	    alaTrapInetStationProtocol,
	    alaTrapInetStationUser,
	    alaTrapInetStationReplay,
	    alaTrapInetStationNextSeq,
	    alaTrapInetFilterStatus
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for Trap Management."
        ::= { alcatelIND1TrapMgrMIBGroups 1 }


    trapTrapsGroup NOTIFICATION-GROUP
	NOTIFICATIONS
	{
	    trapAbsorptionTrap
	}
        STATUS  current
        DESCRIPTION
            "Collection of notifications for Trap Management."
        ::= { alcatelIND1TrapMgrMIBGroups 2 }


     trapNotifGroup OBJECT-GROUP
        OBJECTS
        {
	    trapAbsorStamp,
	    trapAbsorTrapId,
	    trapAbsorCounter,
	    trapAbsorTime
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects
	     for Trap Management notifications."
        ::= { alcatelIND1TrapMgrMIBGroups 3 }


END