ALCATEL-IND1-UDLD-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE FROM SNMPv2-SMI InterfaceIndex FROM IF-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, MacAddress FROM SNMPv2-TC softentIND1Udld FROM ALCATEL-IND1-BASE; alcatelIND1UDLDMIB MODULE-IDENTITY LAST-UPDATED "200702140000Z" ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel Internetworking, Incorporated (Division 1, Formerly XYLAN Corporation) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://www.ind.alcatel.com File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line UDLD for detection and disabling unidirectional links. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE" REVISION "200702140000Z" DESCRIPTION "The UDLD MIB defines a set of UDLD related management objects for ports that support UniDirectional Link Detection (UDLD) Protocol. UDLD as a protocol provides mechanisms to detect and disable unidirectional links caused for instance by mis-wiring of fiber strands, interface malfunctions, media converters' faults, etc. It operates at Layer 2 in conjunction with IEEE 802.3's existing Layer 1 fault detection mechanisms. This MIB comprises proprietary managed objects as well the objects required for conforming to the protocol." ::= { softentIND1Udld 1} -- -------------------------------------------------------------- alcatelIND1UDLDMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For UDLD Subsystem Managed Objects." ::= { alcatelIND1UDLDMIB 1 } alcatelIND1UDLDMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for UDLD Module MIB Subsystem Conformance Information." ::= { alcatelIND1UDLDMIB 2 } alcatelIND1UDLDMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for UDLD Module MIB Subsystem Units of Conformance." ::= { alcatelIND1UDLDMIBConformance 1 } alcatelIND1UDLDMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for UDLD Module MIB Subsystem Compliance Statements." ::= { alcatelIND1UDLDMIBConformance 2 } -- -------------------------------------------------------------- -- -------------------------------------------------------------- -- UDLD MIB -- -------------------------------------------------------------- alaUdldGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable UDLD on the switch. The value enable (1) indicates that UDLD should be enabled on the switch. The value disable (2) is used to disable UDLD on the switch. By default, UDLD is disabled on the switch." DEFVAL { disable } ::= { alcatelIND1UDLDMIBObjects 1 } alaUdldGlobalClearStats OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear statistics control for UDLD. The value reset (1) indicates that UDLD should clear all statistic counters related to all ports in the system. By default, this object contains a zero value." DEFVAL { default } ::= { alcatelIND1UDLDMIBObjects 2 } alaUdldGlobalConfigUdldMode OBJECT-TYPE SYNTAX INTEGER { normal (1), aggressive (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the mode of operation of the UDLD protocol on the interface. normal - The UDLD state machines participates normally in UDLD protocol exchanges. The protocol determination at the end of detection process is always based upon information received in UDLD messages. aggressive - UDLD will shut down all port even in case it loses bidirectional connectivity with the neighbor for a defined period of time." DEFVAL { normal } ::= { alcatelIND1UDLDMIBObjects 3 } alaUdldGlobalConfigUdldProbeIntervalTimer OBJECT-TYPE SYNTAX Unsigned32 ( 7 .. 90 ) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum period of time after which the Probe message is expected from the neighbor. The range supported is 7-90 seconds." DEFVAL { 15 } ::= { alcatelIND1UDLDMIBObjects 4 } alaUdldGlobalConfigUdldDetectionPeriodTimer OBJECT-TYPE SYNTAX Unsigned32 (4 .. 15) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum period of time before which detection of neighbor is expected. If Reply to the Sent Echo message/(s) is not received before, the timer for detection period expires, the link is detected as faulty and the associated port state is marked Undetermined/Shutdown (depending upon the UDLD operation-mode is Normal/Aggressive)." DEFVAL { 8 } ::= { alcatelIND1UDLDMIBObjects 5 } -- ------------------------------------------------------------- -- UDLD Port Config Table -- ------------------------------------------------------------- -- DESCRIPTION: -- "Port configuration information -- data for the UDLD Module. -- Implementation of this group is mandantory" udldPortConfig OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIBObjects 6 } alaUdldPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaUdldPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing UDLD port configuration information." ::= { udldPortConfig 1 } alaUdldPortConfigEntry OBJECT-TYPE SYNTAX AlaUdldPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A UDLD port configuration entry." INDEX { alaUdldPortConfigIfIndex } ::= { alaUdldPortConfigTable 1 } AlaUdldPortConfigEntry ::= SEQUENCE { alaUdldPortConfigIfIndex InterfaceIndex, alaUdldPortConfigUdldStatus INTEGER, alaUdldPortConfigUdldMode INTEGER, alaUdldPortConfigUdldProbeIntervalTimer Unsigned32, alaUdldPortConfigUdldDetectionPeriodTimer Unsigned32, alaUdldPortConfigUdldOperationalStatus INTEGER } alaUdldPortConfigIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of the port on which UDLD is running" ::= { alaUdldPortConfigEntry 1 } alaUdldPortConfigUdldStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable UDLD on the interface. The value enable (1) indicates that UDLD should be enabled on the interface. The value disable (2) is used to disable UDLD on the interface. By default, UDLD is disabled on the interface." DEFVAL { disable } ::= { alaUdldPortConfigEntry 2 } alaUdldPortConfigUdldMode OBJECT-TYPE SYNTAX INTEGER { normal (1), aggressive (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the mode of operation of the UDLD protocol on the interface. normal - The UDLD state machines participates normally in UDLD protocol exchanges. The protocol determination at the end of detection process is always based upon information received in UDLD messages. aggressive - UDLD will shut down a port even in case it loses bidirectional connectivity with the neighbor for a defined period of time." DEFVAL { normal } ::= { alaUdldPortConfigEntry 3 } alaUdldPortConfigUdldProbeIntervalTimer OBJECT-TYPE SYNTAX Unsigned32 ( 7 .. 90 ) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum period of time after which the Probe message is expected from the neighbor. The range supported is 7-90 seconds." DEFVAL { 15 } ::= { alaUdldPortConfigEntry 4 } alaUdldPortConfigUdldDetectionPeriodTimer OBJECT-TYPE SYNTAX Unsigned32 (4 .. 15) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum period of time before which detection of neighbor is expected. If Reply to the Sent Echo message/(s) is not received before, the timer for detection period expires, the link is detected as faulty and the associated port state is marked Undetermined/Shutdown (depending upon the UDLD operation-mode is Normal/Aggressive)." DEFVAL { 8 } ::= { alaUdldPortConfigEntry 5 } alaUdldPortConfigUdldOperationalStatus OBJECT-TYPE SYNTAX INTEGER { notapplicable (0), shutdown (1), undetermined (2), bidirectional (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the interface as determined by UDLD operation." ::= { alaUdldPortConfigEntry 6 } -- ------------------------------------------------------------- -- UDLD Statistics Table -- ------------------------------------------------------------- -- DESCRIPTION: -- "Statistics parameters information -- data for the UDLD Module. -- Implementation of this group is mandantory" udldPortStats OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIBObjects 7 } alaUdldPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaUdldPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing UDLD statistics information." ::= { udldPortStats 1 } alaUdldPortStatsEntry OBJECT-TYPE SYNTAX AlaUdldPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A UDLD Statistics entry (per port)." INDEX { alaUdldPortStatsIfIndex } ::= { alaUdldPortStatsTable 1 } AlaUdldPortStatsEntry ::= SEQUENCE { alaUdldPortStatsIfIndex InterfaceIndex, alaUdldNumUDLDNeighbors Unsigned32, alaUdldPortStatsClear INTEGER, alaUdldPortNumProbeSent Counter32 , alaUdldPortNumEchoSent Counter32, alaUdldPortNumInvalidRcvd Counter32, alaUdldPortNumFlushRcvd Counter32 } alaUdldPortStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of the port on which UDLD is running" ::= { alaUdldPortStatsEntry 1 } alaUdldNumUDLDNeighbors OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 128 ) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of neighbors for the interface." ::= { alaUdldPortStatsEntry 2 } alaUdldPortStatsClear OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all statistics parameters corresponding to this port. By default, this objects contains a zero value." DEFVAL { default } ::= { alaUdldPortStatsEntry 3} alaUdldPortNumProbeSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Probe message sent by a port." ::= {alaUdldPortStatsEntry 4} alaUdldPortNumEchoSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Echo message sent by a port." ::= {alaUdldPortStatsEntry 5} alaUdldPortNumInvalidRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Invalid message received by a port." ::= {alaUdldPortStatsEntry 6} alaUdldPortNumFlushRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of UDLD-Flush message received by a port." ::= {alaUdldPortStatsEntry 7} udldPortNeighborStats OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIBObjects 8 } alaUdldPortNeighborStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaUdldPortNeighborStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "UDLD port's PDU related statistics for a neighbor." ::= { udldPortNeighborStats 1 } alaUdldPortNeighborStatsEntry OBJECT-TYPE SYNTAX AlaUdldPortNeighborStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A UDLD Statistics entry (per port, per neighbor)." INDEX { alaUdldPortNeighborStatsIfIndex, alaUdldNeighborIfIndex } ::= { alaUdldPortNeighborStatsTable 1 } AlaUdldPortNeighborStatsEntry ::= SEQUENCE { alaUdldPortNeighborStatsIfIndex InterfaceIndex, alaUdldNeighborIfIndex MacAddress, alaUdldNeighborName DisplayString, alaUdldNumHelloRcvd Counter32, alaUdldNumEchoRcvd Counter32 } alaUdldPortNeighborStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of the port on which UDLD is running" ::= { alaUdldPortNeighborStatsEntry 1 } alaUdldNeighborIfIndex OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the neighbor to which the Statistics belong" ::= { alaUdldPortNeighborStatsEntry 2 } alaUdldNeighborName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the neighbor" DEFVAL { "" } ::= {alaUdldPortNeighborStatsEntry 3} alaUdldNumHelloRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of hello messages recieved from the neighbor for this interface." ::= { alaUdldPortNeighborStatsEntry 4 } alaUdldNumEchoRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of echo messages received from the neighbor for this interface." ::= { alaUdldPortNeighborStatsEntry 5 } -- -------------------------------------------------------------- -- NOTIFICATIONS (TRAPS) -- These notifications will be sent to the management entity, whenever the UDLD-state -- of a port gets changed - -- whenever UDLD state of any port changes from BIDIRECTIONAL to UNDETERMINED -- whenever UDLD state of any port changes from BIDIRECTIONAL to SHUTDOWN -- whenever UDLD state of any port changes from UNDETERMINED to SHUTDOWN -- whenever UDLD state of any port changes from UNDETERMINED to BIDIRECTIONAL -- whenever UDLD state of any port changes from SHUTDOWN to BIDIRECTIONAL -- -------------------------------------------------------------- alaUdldPrevState OBJECT-TYPE SYNTAX INTEGER { notapplicable (0), shutdown (1), undetermined (2), bidirectional (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The previous UDLD state of the Port." ::= { alcatelIND1UDLDMIBObjects 9 } alaUdldCurrentState OBJECT-TYPE SYNTAX INTEGER { notapplicable (0), shutdown (1), undetermined (2), bidirectional (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current UDLD state of the Port." ::= { alcatelIND1UDLDMIBObjects 10 } alaUdldPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ifindex of the port on which UDLD trap is raised" ::= { alcatelIND1UDLDMIBObjects 11 } alaUdldEvents OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIB 3 } udldStateChange NOTIFICATION-TYPE OBJECTS { alaUdldPortIfIndex, alaUdldPrevState, alaUdldCurrentState } STATUS current DESCRIPTION "The UDLD-state of port has changed. Notify the user by raising the Trap. Notify the Management Entity the previous UDLD-state and UDLD-Current." ::= { alaUdldEvents 0 1 } -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- UNITS OF CONFORMANCE -- ------------------------------------------------------------- udldPortBaseGroup OBJECT-GROUP OBJECTS { alaUdldGlobalStatus, alaUdldGlobalClearStats, alaUdldPrevState, alaUdldCurrentState, alaUdldPortIfIndex } STATUS current DESCRIPTION "Collection of objects for management of UDLD Base Group." ::= { alcatelIND1UDLDMIBGroups 1 } udldPortConfigGroup OBJECT-GROUP OBJECTS { alaUdldPortConfigUdldStatus, alaUdldPortConfigUdldMode, alaUdldPortConfigUdldProbeIntervalTimer, alaUdldPortConfigUdldDetectionPeriodTimer, alaUdldPortConfigUdldOperationalStatus } STATUS current DESCRIPTION "Collection of objects for management of UDLD Port Configuration Table." ::= { alcatelIND1UDLDMIBGroups 2 } udldPortStatsGroup OBJECT-GROUP OBJECTS { alaUdldNumUDLDNeighbors, alaUdldPortStatsClear, alaUdldPortNumProbeSent, alaUdldPortNumEchoSent, alaUdldPortNumInvalidRcvd, alaUdldPortNumFlushRcvd } STATUS current DESCRIPTION "Collection of objects for management of UDLD Port Statistics Table." ::= { alcatelIND1UDLDMIBGroups 3 } udldPortNeighborStatsGroup OBJECT-GROUP OBJECTS { alaUdldNeighborName, alaUdldNumHelloRcvd, alaUdldNumEchoRcvd } STATUS current DESCRIPTION "Collection of objects for management of UDLD Port Neighbor Statistics Table." ::= { alcatelIND1UDLDMIBGroups 4 } udldPortTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { udldStateChange } STATUS current DESCRIPTION "Collection of objects for UDLD Traps." ::= { alcatelIND1UDLDMIBGroups 5 } -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- COMPLIANCE -- ------------------------------------------------------------- alcatelIND1UDLDMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for UDLD." MODULE MANDATORY-GROUPS { udldPortBaseGroup, udldPortConfigGroup, udldPortStatsGroup, udldPortNeighborStatsGroup, udldPortTrapGroup } ::= { alcatelIND1UDLDMIBCompliances 1 } -- ------------------------------------------------------------- END