ALCATEL-IND1-UDP-RELAY-MIB DEFINITIONS ::= BEGIN IMPORTS RowStatus FROM SNMPv2-TC IpAddress, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32, Counter32 FROM SNMPv2-SMI DisplayString, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF routingIND1UdpRelay, alaDhcpClientTraps FROM ALCATEL-IND1-BASE InterfaceIndex FROM IF-MIB; alcatelIND1UDPRelayMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel -Architects Of An Internet World " CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line UDP Relay to forward BOOTP/DHCP requests across VLANs The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= {routingIND1UdpRelay 1} alcatelIND1UDPRelayMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For UDP Relay Subsystem Managed Objects." ::= { alcatelIND1UDPRelayMIB 1 } alcatelIND1UDPRelayMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For UDP Relay Subsystem Conformance Information." ::= { alcatelIND1UDPRelayMIB 2 } alcatelIND1UDPRelayMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For UDP Relay Subsystem Units Of Conformance." ::= { alcatelIND1UDPRelayMIBConformance 1 } alcatelIND1UDPRelayMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For UDP Relay Subsystem Compliance Statements." ::= { alcatelIND1UDPRelayMIBConformance 2 } iphelperMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 1 } IphelperServIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IphelperServIndex provides a means to specify a service to be forwarded by UDP Relay. Some values indicate a specfic protocol and associated UDP port(s): ---------------- ---------- ----------- Value Protocol UDP port(s) ---------------- ---------- ----------- iphelperBootp BOOTP/DHCP 67/68 iphelperNbnsNbdd NBNS/NBDD 137/138 iphelperNbdd NBDD 138 iphelperDns DNS 53 iphelperTacacs TACACS 65 iphelperTftp TFTP 69 iphelperNtp NTP 123 The remaining values are to be used for other services: ---------------- ---------- ----------- Value Protocol UDP port ---------------- ---------- ----------- iphelperOther1 ? user-specified iphelperOther2 ? user-specified iphelperOther3 ? user-specified iphelperOther4 ? user-specified iphelperOther5 ? user-specified iphelperOther6 ? user-specified iphelperOther7 ? user-specified iphelperOther8 ? user-specified iphelperOther9 ? user-specified iphelperOther10 ? user-specified " SYNTAX INTEGER { iphelperBootp(1), iphelperNbnsNbdd(2), iphelperNbdd(3), iphelperDns(4), iphelperTacacs(5), iphelperTftp(6), iphelperNtp(7), iphelperOther1(8), iphelperOther2(9), iphelperOther3(10), iphelperOther4(11), iphelperOther5(12), iphelperOther6(13), iphelperOther7(14), iphelperOther8(15), iphelperOther9(16), iphelperOther10(17), iphelperOther11(18), iphelperOther12(19), iphelperOther13(20), iphelperOther14(21), iphelperOther15(22), iphelperOther16(23), iphelperOther17(24), iphelperOther18(25), iphelperOther19(26), iphelperOther20(27), iphelperOther21(28), iphelperOther22(29), iphelperOther23(30), iphelperOther24(31), iphelperOther25(32) } IphelpereOption82ASCIIFieldType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Ip helper Option 82 Format ASCII field type" SYNTAX INTEGER { none(0), macAddress(1), systemName(2), userString(3), interfaceAlias(4), vlan(5), interface(6) } iphelperTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of active UDP Relay Service instances." ::= { iphelperMIB 1 } iphelperEntry OBJECT-TYPE SYNTAX IphelperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in UDP Relay table" INDEX { iphelperService, iphelperForwAddr ,iphelperVlan } ::= { iphelperTable 1 } IphelperEntry ::= SEQUENCE { iphelperService IphelperServIndex, iphelperForwAddr IpAddress, iphelperVlan Unsigned32, iphelperStatus RowStatus } iphelperService OBJECT-TYPE SYNTAX IphelperServIndex MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies a service to be forwarded by UDP Relay." ::= { iphelperEntry 1 } iphelperForwAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies relayed service's forwarding address. For entries with iphelperService equal to iphelperBootp(1): This object can either be set to a distinct IP address (e.g. the address of a server), to an IP broadcast address or a VLAN. A value of 0.0.0.0 indicates that no forwarding address is being used. For entries with iphelperService not equal to ipHelperBootp(1), this object is not settable." ::= { iphelperEntry 2 } iphelperVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies a Vlan to which the service is to be forwarded. For entries with iphelperService equal to iphelperBootp(1), a value of 0 indicates that no vlan is being used. For entries with iphelperService not equal to ipHelperBootp(1), only non-zero values may be specified." ::= { iphelperEntry 3 } iphelperStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for creating/deleting" ::= { iphelperEntry 4 } iphelperStatTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This keeps statistics for each service by server address." ::= { iphelperMIB 2 } iphelperStatEntry OBJECT-TYPE SYNTAX IphelperStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the stat table." INDEX {iphelperServerAddress} ::= { iphelperStatTable 1 } IphelperStatEntry ::= SEQUENCE { iphelperServerAddress IpAddress, iphelperRxFromClient Unsigned32, iphelperTxToServer Unsigned32, iphelperMaxHopsViolation Unsigned32, iphelperForwDelayViolation Unsigned32, iphelperResetAll INTEGER, iphelperAgentInfoViolation Counter32, iphelperInvalidGatewayIP Counter32, iphelperInvalidAgentInfoOptFrmSrver Counter32 } iphelperServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the unique server address." ::= { iphelperStatEntry 1 } iphelperRxFromClient OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This keeps track of the number of packets recieved from the client." ::= { iphelperStatEntry 2 } iphelperTxToServer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This keeps track of the number of packets transmitted to the server." ::= { iphelperStatEntry 3} iphelperMaxHopsViolation OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This keeps track of the number of packets dropped due to max hops violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1)." ::= { iphelperStatEntry 4} iphelperForwDelayViolation OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to forward delay violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1)." ::= { iphelperStatEntry 5} iphelperResetAll OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter resets all the stats." ::= { iphelperStatEntry 6} iphelperAgentInfoViolation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to DHCP packet with giaddr field not equal to zero and Relay Agent Information option is present and also the Relay Agent Information Policy is set to DROP." ::= { iphelperStatEntry 7} iphelperInvalidGatewayIP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to giaddr matching a local subnet and Relay Agent Information option is present in the DHCP packet." ::= { iphelperStatEntry 8} iphelperInvalidAgentInfoOptFrmSrver OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to invalid from DHCP server with Relay Agent Information option in the DHCP packet." ::= { iphelperStatEntry 9} iphelperForwDelay OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. For other services it is ignored.It is typically set as seconds, but the value is totally client dependent.This relay will not forward frames until client frames have 'secs' field set to atleast the value iphelperForwDelay." ::= { iphelperMIB 3 } iphelperMaxHops OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the BOOTP/DHCP relay's maximum hops forwarding limit and is only used by the BOOTP/DHCP service. For other services it is ignored. If a frame arrives with hopcount greater than or equal to iphelperMaxHops, it will be dropped." ::= {iphelperMIB 4} iphelperForwardOption OBJECT-TYPE SYNTAX INTEGER { standard(1), avlanOnly(2), perVlanOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is only significant for the BOOTP/DHCP service. It allows the relay to forward DHCP requests only when they are issued by an Authenticated Vlan client.Needed to prevent having multiple relays enabled on the same vlan. Default value is standard" ::= {iphelperMIB 5} iphelperBootupOption OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of the relay to get an IP address at the time of system boot-up and assign that IP address as the router IP of the default VLAN. Default option is Disable." ::= {iphelperMIB 6} iphelperBootupPacketOption OBJECT-TYPE SYNTAX INTEGER { bootp(1), dhcp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is only significant for the BOOTP/DHCP service. It allows the user to select the packet format with the choices of BOOTP and DHCP to be used to get an IP address at the time of system boot-up. Default option is DHCP" ::= {iphelperMIB 7} iphelperxServicePortAssociationTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperxServicePortAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of services being forwarded with their associated ports. An entry in this table is allowed only for the services listed below: iphelperBootp iphelperNbnsNbdd iphelperNbdd iphelperDns iphelperTacacs iphelperTftp iphelperNtp " ::= { iphelperMIB 8 } iphelperxServicePortAssociationEntry OBJECT-TYPE SYNTAX IphelperxServicePortAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in UDP Relay PortAssociation table" INDEX { iphelperxServicePortAssociationService } ::= { iphelperxServicePortAssociationTable 1 } IphelperxServicePortAssociationEntry ::= SEQUENCE { iphelperxServicePortAssociationService IphelperServIndex, iphelperxServicePortAssociationPort Unsigned32, iphelperxServicePortAssociationName DisplayString, iphelperxServicePortAssociationStatus RowStatus } iphelperxServicePortAssociationService OBJECT-TYPE SYNTAX IphelperServIndex MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the service being forwarded. Legal values: iphelperBootp(1) iphelperNbnsNbdd(2) iphelperNbdd(3) iphelperDns(4) iphelperTacacs(5) iphelperTftp(6) iphelperNtp(7) " ::= { iphelperxServicePortAssociationEntry 1 } iphelperxServicePortAssociationPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP port for the service." ::= { iphelperxServicePortAssociationEntry 2 } iphelperxServicePortAssociationName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name and/or description of the service." ::= { iphelperxServicePortAssociationEntry 3 } iphelperxServicePortAssociationStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting" ::= { iphelperxServicePortAssociationEntry 4 } iphelperxPortServiceAssociationTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperxPortServiceAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of services being forwarded with their associated ports. An entry in this table is allowed only for those services NOT using one of the following well-known ports: 53 - DNS 65 - TACACS 67 - BOOTP/DHCP 68 - BOOTP/DHCP 69 - TFTP 123 - NTP 137 - NBNS 138 - NBDD " ::= { iphelperMIB 9 } iphelperxPortServiceAssociationEntry OBJECT-TYPE SYNTAX IphelperxPortServiceAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in UDP Relay PortAssociation table" INDEX { iphelperxPortServiceAssociationPort } ::= { iphelperxPortServiceAssociationTable 1 } IphelperxPortServiceAssociationEntry ::= SEQUENCE { iphelperxPortServiceAssociationService IphelperServIndex, iphelperxPortServiceAssociationPort Unsigned32, iphelperxPortServiceAssociationName DisplayString, iphelperxPortServiceAssociationStatus RowStatus } iphelperxPortServiceAssociationService OBJECT-TYPE SYNTAX IphelperServIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the service being forwarded." ::= { iphelperxPortServiceAssociationEntry 1 } iphelperxPortServiceAssociationPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "UDP port for the service. May not be one of the following well-known ports: 53 - DNS 65 - TACACS 67 - BOOTP/DHCP 68 - BOOTP/DHCP 69 - TFTP 123 - NTP 137 - NBNS 138 - NBDD " ::= { iphelperxPortServiceAssociationEntry 2 } iphelperxPortServiceAssociationName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name and/or description of the service." ::= { iphelperxPortServiceAssociationEntry 3 } iphelperxPortServiceAssociationStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting" ::= { iphelperxPortServiceAssociationEntry 4 } iphelperxPropertiesTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperPropertiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of services being forwarded with their associated ports. There is an entry in this table for each service being forwarded by UDP Relay, including those with implied protocol/port associations." ::= { iphelperMIB 10 } iphelperxPropertiesEntry OBJECT-TYPE SYNTAX IphelperPropertiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in UDP Relay Service Properties table" INDEX { iphelperxPropertiesService } ::= { iphelperxPropertiesTable 1 } IphelperPropertiesEntry ::= SEQUENCE { iphelperxPropertiesService IphelperServIndex, iphelperxPropertiesPort Unsigned32, iphelperxPropertiesName DisplayString } iphelperxPropertiesService OBJECT-TYPE SYNTAX IphelperServIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the service to be forwarded." ::= { iphelperxPropertiesEntry 1 } iphelperxPropertiesPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP port for the service." ::= { iphelperxPropertiesEntry 2 } iphelperxPropertiesName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name/description of the service." ::= { iphelperxPropertiesEntry 3 } iphelperxStatTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperxStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This keeps statistics for each service by server address." ::= { iphelperMIB 11 } iphelperxStatEntry OBJECT-TYPE SYNTAX IphelperxStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the stat table." INDEX {iphelperxStatService, iphelperxStatServerAddress} ::= { iphelperxStatTable 1 } IphelperxStatEntry ::= SEQUENCE { iphelperxStatService IphelperServIndex, iphelperxStatServerAddress IpAddress, iphelperxStatVlan Unsigned32, iphelperxStatRxFromClient Unsigned32, iphelperxStatTxToServer Unsigned32, iphelperxStatReset INTEGER } iphelperxStatService OBJECT-TYPE SYNTAX IphelperServIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the service being forwarded." ::= { iphelperxStatEntry 1 } iphelperxStatServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the unique server address." ::= { iphelperxStatEntry 2 } iphelperxStatVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the unique Vlan of the server." ::= { iphelperxStatEntry 3 } iphelperxStatRxFromClient OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets recieved from the client." ::= { iphelperxStatEntry 4 } iphelperxStatTxToServer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " This keeps track of the number of packets transmitted to the server." ::= { iphelperxStatEntry 5} iphelperxStatReset OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter resets all the stats for this entry." ::= { iphelperxStatEntry 6} iphelperAgentInformation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of inserting the relay agent information option to the DHCP option field according to RFC 3046." ::= {iphelperMIB 12} iphelperAgentInformationPolicy OBJECT-TYPE SYNTAX INTEGER { drop(1), keep(2), replace(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is only significant for the BOOTP/DHCP service. It allows the user to select the policy of either drop, keep or replace the relay agent information option if it is already present in the DHCP packet." ::= {iphelperMIB 13} iphelperDhcpSnoopingVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperDhcpSnoopingVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vlans that have DHCP Snooping enabled." ::= { iphelperMIB 14 } iphelperDhcpSnoopingVlanEntry OBJECT-TYPE SYNTAX IphelperDhcpSnoopingVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DHCP Snooping VLAN entry." INDEX { iphelperDhcpSnoopingVlanNumber } ::= { iphelperDhcpSnoopingVlanTable 1 } IphelperDhcpSnoopingVlanEntry ::= SEQUENCE { iphelperDhcpSnoopingVlanNumber INTEGER, iphelperDhcpSnoopingVlanOpt82DataInsertionStatus INTEGER, iphelperDhcpSnoopingVlanMacAddrVerificationStatus INTEGER, iphelperDhcpSnoopingVlanTrafficSuppressionStatus INTEGER, iphelperDhcpSnoopingVlanStatus RowStatus } iphelperDhcpSnoopingVlanNumber OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { iphelperDhcpSnoopingVlanEntry 1 } iphelperDhcpSnoopingVlanOpt82DataInsertionStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Option-82 data insertion status. Default value is enabled, which means once the VLAN is enabled for DHCP snooping, the Option-82 field will be inserted in the DHCP packets between the Relay Agent and the DHCP Server, on all the ports belong to the VLAN." DEFVAL { enabled } ::= { iphelperDhcpSnoopingVlanEntry 2 } iphelperDhcpSnoopingVlanMacAddrVerificationStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping MAC Address verification status. Default value is enabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vlan port, it compares the source MAC address and the client Hardware Address in the DHCP packet. If mismatch, the packet will be dropped." DEFVAL { enabled } ::= { iphelperDhcpSnoopingVlanEntry 3 } iphelperDhcpSnoopingVlanTrafficSuppressionStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vlan port will not be flooded throughout the VLAN. The usage of UDP/DHCP Relay Agent will be enforced. Traffic will always be forwarded to CPU." DEFVAL { disabled } ::= { iphelperDhcpSnoopingVlanEntry 4 } iphelperDhcpSnoopingVlanStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting" ::= { iphelperDhcpSnoopingVlanEntry 5 } iphelperDhcpSnoopingPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperDhcpSnoopingPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ports that have DHCP Snooping trust status." ::= { iphelperMIB 15 } iphelperDhcpSnoopingPortEntry OBJECT-TYPE SYNTAX IphelperDhcpSnoopingPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DHCP Snooping Port entry." INDEX { iphelperDhcpSnoopingPortIfIndex } ::= { iphelperDhcpSnoopingPortTable 1 } IphelperDhcpSnoopingPortEntry ::= SEQUENCE { iphelperDhcpSnoopingPortIfIndex InterfaceIndex, iphelperDhcpSnoopingPortTrustMode INTEGER, iphelperDhcpSnoopingPortTrafficSuppression INTEGER, iphelperDhcpSnoopingPortMacAddrViolation Counter32, iphelperDhcpSnoopingPortDhcpServerViolation Counter32, iphelperDhcpSnoopingPortRelayAgentViolation Counter32, iphelperDhcpSnoopingPortOption82Violation Counter32, iphelperDhcpSnoopingPortBindingViolation Counter32, iphelperDhcpSnoopingPortIpSourceFiltering INTEGER } iphelperDhcpSnoopingPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex subindex identifying this instance." ::= { iphelperDhcpSnoopingPortEntry 1 } iphelperDhcpSnoopingPortTrustMode OBJECT-TYPE SYNTAX INTEGER { blocked(1), clientOnly(2), trusted(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping's VLAN port's trust mode. Default value is client-only, which means once the VLAN is enabled for DHCP snooping, the vlan ports only allow DHCP client packets. Blocked means all DHCP traffic is block on the port. Trusted means all DHCP traffic is allowed on the port" DEFVAL { clientOnly } ::= { iphelperDhcpSnoopingPortEntry 2 } iphelperDhcpSnoopingPortTrafficSuppression OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those ports will not be flooded instead will always be forwarded to CPU." DEFVAL { disabled } ::= { iphelperDhcpSnoopingPortEntry 3 } iphelperDhcpSnoopingPortMacAddrViolation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to DHCP packet with the source MAC Address not equal the client DHCP Hardware address in the DHCP packet." ::= { iphelperDhcpSnoopingPortEntry 4 } iphelperDhcpSnoopingPortDhcpServerViolation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to receiving an DHCP server packet on a DHCP Snooping enabled port." ::= { iphelperDhcpSnoopingPortEntry 5 } iphelperDhcpSnoopingPortOption82Violation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to a relay agent forards a packet that includes option 82 info to an untrusted port." ::= { iphelperDhcpSnoopingPortEntry 6 } iphelperDhcpSnoopingPortRelayAgentViolation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to an DHCP relay agent forwards a DHCP packate includes an relay agent ip address that is not 0.0.0.0." ::= { iphelperDhcpSnoopingPortEntry 7 } iphelperDhcpSnoopingPortBindingViolation OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This keeps track of the number of packets dropped due to receiving an DHCP Relase or DHCP Decline message that contains a MAC address in the DHCP snooping binding table, but the interface information in the binding table does not match the interface on which the message was received." ::= { iphelperDhcpSnoopingPortEntry 8 } iphelperDhcpSnoopingPortIpSourceFiltering OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping IP Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IP address, MAC address and port will be allowed." DEFVAL { disabled } ::= { iphelperDhcpSnoopingPortEntry 9 } iphelperDhcpSnoopingBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF IphelperDhcpSnoopingBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP Snooping binding table." ::= { iphelperMIB 16 } iphelperDhcpSnoopingBindingEntry OBJECT-TYPE SYNTAX IphelperDhcpSnoopingBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DHCP Snooping binding entry." INDEX { iphelperDhcpSnoopingBindingMacAddress, iphelperDhcpSnoopingBindingIfIndex } ::= { iphelperDhcpSnoopingBindingTable 1 } IphelperDhcpSnoopingBindingEntry ::= SEQUENCE { iphelperDhcpSnoopingBindingMacAddress MacAddress, iphelperDhcpSnoopingBindingIfIndex InterfaceIndex, iphelperDhcpSnoopingBindingIpAddress IpAddress, iphelperDhcpSnoopingBindingVlan Unsigned32, iphelperDhcpSnoopingBindingLeaseTime Unsigned32, iphelperDhcpSnoopingBindingType INTEGER, iphelperDhcpSnoopingBindingRowStatus RowStatus } iphelperDhcpSnoopingBindingMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC Address subindex identifying this instance." ::= { iphelperDhcpSnoopingBindingEntry 1 } iphelperDhcpSnoopingBindingIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The IfIndex subindex identifying this instance. It is the the interface where the DHCP request is coming in from." ::= { iphelperDhcpSnoopingBindingEntry 2 } iphelperDhcpSnoopingBindingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Ip Address offered by the DHCP Server to the Client." ::= { iphelperDhcpSnoopingBindingEntry 3 } iphelperDhcpSnoopingBindingVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "It is the VLAN Id where the DHCP client belongs to." ::= { iphelperDhcpSnoopingBindingEntry 4 } iphelperDhcpSnoopingBindingLeaseTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lease time of the client's IP Address." ::= { iphelperDhcpSnoopingBindingEntry 5 } iphelperDhcpSnoopingBindingType OBJECT-TYPE SYNTAX INTEGER { dynamic(1), static(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The learning/configuration nature of the binding entry. Normally, the entries are learned dynamically, while it also can be statically/manually configured." DEFVAL { dynamic } ::= { iphelperDhcpSnoopingBindingEntry 6 } iphelperDhcpSnoopingBindingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting" ::= { iphelperDhcpSnoopingBindingEntry 7 } iphelperDhcpSnooping OBJECT-TYPE SYNTAX INTEGER { switchLevel(1), disabled(2), vlanLevel(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling DHCP Snooping at the switch level. For the vlan level, it is enabled implicitly when an individual vlan's DHCP Snooping is enbled." ::= {iphelperMIB 17} iphelperDhcpSnoopingOpt82DataInsertionStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Option-82 data insertion status at switch level. Default value is enabled, the Option-82 field will be inserted in the DHCP packets between the Relay Agent and the DHCP Server, on all the ports belong to the switch." DEFVAL { enabled } ::= { iphelperMIB 18 } iphelperDhcpSnoopingMacAddrVerificationStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping MAC Address verification status at switch level. Default value is enabled. Once enabled, for all the incoming DHCP traffic to the port, it compares the source MAC address and the client Hardware Address in the DHCP packet. If mismatch, the packet will be dropped." DEFVAL { enabled } ::= { iphelperMIB 19 } iphelperDhcpSnoopingTrafficSuppressionStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping Traffic Suppression status at switch level. Default value is disabled. Once enabled, for all the incoming DHCP traffic to the ports will not be flooded The usage of UDP/DHCP Relay Agent will be enforced. DHCP Traffic will always be forwarded to CPU." DEFVAL { disabled } ::= { iphelperMIB 20 } iphelperDhcpSnoopingBindingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the capability of building the DHCP Snooping Binding Table/Database is enable or not. By default, it is enabled. It is applicable for both switch-level or vlan-level DHCP Snooping." DEFVAL { enabled } ::= { iphelperMIB 21 } iphelperDhcpSnoopingBindingDatabaseSyncTimeout OBJECT-TYPE SYNTAX Unsigned32 (180..600) MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP Snooping Binding Database synchronization timeout value. It is used to specify the synchronization frequency, in seconds, between the binding table in memory and the binding file in flash." DEFVAL { 300 } ::= { iphelperMIB 22 } iphelperDhcpSnoopingBindingDatabaseLastSyncTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last successuful DHCP Snooping Binding Database synchronization." ::= { iphelperMIB 23 } iphelperDhcpSnoopingBindingDatabaseAction OBJECT-TYPE SYNTAX INTEGER { noaction(0), purge(1), renew(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the action to be performed. Purge: means to clear the binding table entries in the memory. Renew: means to populate the binding table entries from the flash file." ::= { iphelperMIB 24 } iphelperTrafficSuppressionStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP packet traffic suppression status. By default, it is disabled. Once enabled, all incoming DHCP packets will be sent to software only, and no longer be hardware flooded." DEFVAL { disabled } ::= { iphelperMIB 25 } iphelperDhcpSnoopingBypassOpt82CheckStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP bypass option-82 check status. By default, it is disabled. Once enabled, it will no longer enforce the check of option-82 field in the incoming DHCP Packets on those untrusted ports." DEFVAL { disabled } ::= { iphelperMIB 26 } iphelperDhcpOption82FormatType OBJECT-TYPE SYNTAX INTEGER { macAddress(1), systemName(2), userString(3), interfaceAlias(4), autoInterfaceAlias(5), ascii(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP option-82 defines the type of information carried in circuit id and remote id sub option fields. If the type selected is string the actual value of the string can be found in iphelperDhcpOption82StringValue. Format type ASCII will insert the configured fields in ASCII format." DEFVAL { macAddress } ::= { iphelperMIB 27 } iphelperDhcpOption82StringValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the string that will be used in the circuit id and remote id sub options." ::= { iphelperMIB 28 } iphelperPXESupport OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled the relay agent will replace the source IP address of the packet with the gateway IP address from the DHCP packet. The default value is disabled." DEFVAL { disabled } ::= { iphelperMIB 29 } iphelperDhcpSnoopingBindingPersistencyStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Snooping binding table persistency check status. By default, it is disabled. Once enabled, the binding entries expiry will be solely depend on Lease time" DEFVAL { disabled } ::= { iphelperMIB 30 } iphelperDhcpSnoopingOption82FormatASCIIField1 OBJECT-TYPE SYNTAX IphelpereOption82ASCIIFieldType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" DEFVAL { none } ::= { iphelperMIB 31 } iphelperDhcpSnoopingOption82FormatASCIIField1StringValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" ::= { iphelperMIB 32 } iphelperDhcpSnoopingOption82FormatASCIIField2 OBJECT-TYPE SYNTAX IphelpereOption82ASCIIFieldType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" DEFVAL { none } ::= { iphelperMIB 33 } iphelperDhcpSnoopingOption82FormatASCIIField2StringValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" ::= { iphelperMIB 34 } iphelperDhcpSnoopingOption82FormatASCIIField3 OBJECT-TYPE SYNTAX IphelpereOption82ASCIIFieldType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" DEFVAL { none } ::= { iphelperMIB 35 } iphelperDhcpSnoopingOption82FormatASCIIField3StringValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" ::= { iphelperMIB 36 } iphelperDhcpSnoopingOption82FormatASCIIField4 OBJECT-TYPE SYNTAX IphelpereOption82ASCIIFieldType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" DEFVAL { none } ::= { iphelperMIB 37 } iphelperDhcpSnoopingOption82FormatASCIIField4StringValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" ::= { iphelperMIB 38 } iphelperDhcpSnoopingOption82FormatASCIIField5 OBJECT-TYPE SYNTAX IphelpereOption82ASCIIFieldType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" DEFVAL { none } ::= { iphelperMIB 39 } iphelperDhcpSnoopingOption82FormatASCIIField5StringValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII" ::= { iphelperMIB 40 } iphelperDhcpSnoopingOption82FormatASCIIDelimiter OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the delimiter that is inserted between the fields in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This value is applicable only, if the option 82 format type is ASCII" ::= { iphelperMIB 41 } -- -------------------------------------------------------------- -- Trap Description -- -------------------------------------------------------------- alaDhcpClientTrapsDesc OBJECT IDENTIFIER ::= { alaDhcpClientTraps 1 } alaDhcpClientTrapsObj OBJECT IDENTIFIER ::= { alaDhcpClientTraps 2 } -- Notifications alaDhcpClientAddressAddTrap NOTIFICATION-TYPE OBJECTS { alaDhcpClientAddress } STATUS current DESCRIPTION "When new IP address is assigned to DHCP Client interface." ::= { alaDhcpClientTrapsDesc 0 1 } alaDhcpClientAddressExpiryTrap NOTIFICATION-TYPE OBJECTS { alaDhcpClientAddress } STATUS current DESCRIPTION "When the lease time expires or when DHCP client not able to renew/rebind an IP address." ::= { alaDhcpClientTrapsDesc 0 2 } alaDhcpClientAddressModifyTrap NOTIFICATION-TYPE OBJECTS { alaDhcpClientAddress, alaDhcpClientNewAddress } STATUS current DESCRIPTION "When the dhcp client not able to obtain the existing IP address and new IP address is assigned to the DHCP client." ::= { alaDhcpClientTrapsDesc 0 3 } -- Notification Objects alaDhcpClientAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the current IP address of the DHCP client." ::= { alaDhcpClientTrapsObj 1 } alaDhcpClientNewAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the new IP address assigned for the DHCP client." ::= { alaDhcpClientTrapsObj 2 } -- -- COMPLIANCE -- alcatelIND1UDPRelayMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for UDP Relay" MODULE MANDATORY-GROUPS { iphelperGroup, iphelperStatGroup, iphelperMiscGroup, alaDhcpClientTrapsGroup } ::={ alcatelIND1UDPRelayMIBCompliances 1} iphelperGroup OBJECT-GROUP OBJECTS { iphelperForwAddr, iphelperStatus } STATUS current DESCRIPTION " Collection of objects for the management of parameters of UDP Relay." ::= { alcatelIND1UDPRelayMIBGroups 1} iphelperStatGroup OBJECT-GROUP OBJECTS { iphelperServerAddress, iphelperRxFromClient, iphelperTxToServer, iphelperMaxHopsViolation, iphelperForwDelayViolation, iphelperResetAll, iphelperAgentInfoViolation, iphelperInvalidGatewayIP, iphelperInvalidAgentInfoOptFrmSrver } STATUS current DESCRIPTION " Collection of objects for management of statistics for UDP Relay." ::= { alcatelIND1UDPRelayMIBGroups 2} iphelperMiscGroup OBJECT-GROUP OBJECTS { iphelperForwDelay, iphelperMaxHops, iphelperForwardOption, iphelperBootupOption, iphelperBootupPacketOption, iphelperDhcpSnoopingOption82FormatASCIIField1, iphelperDhcpSnoopingOption82FormatASCIIField1StringValue, iphelperDhcpSnoopingOption82FormatASCIIField2, iphelperDhcpSnoopingOption82FormatASCIIField2StringValue, iphelperDhcpSnoopingOption82FormatASCIIField3, iphelperDhcpSnoopingOption82FormatASCIIField3StringValue, iphelperDhcpSnoopingOption82FormatASCIIField4, iphelperDhcpSnoopingOption82FormatASCIIField4StringValue, iphelperDhcpSnoopingOption82FormatASCIIField5, iphelperDhcpSnoopingOption82FormatASCIIField5StringValue, iphelperDhcpSnoopingOption82FormatASCIIDelimiter } STATUS current DESCRIPTION " Other independent objects of UDP Relay." ::= { alcatelIND1UDPRelayMIBGroups 3} alaDhcpClientTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { alaDhcpClientAddressAddTrap, alaDhcpClientAddressExpiryTrap, alaDhcpClientAddressModifyTrap } STATUS current DESCRIPTION "Collection of traps for management of DHCP Client " ::= { alcatelIND1UDPRelayMIBGroups 4} END