ALCATEL-IND1-VLAN-STACKING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF softentIND1VlanStackingMgt FROM ALCATEL-IND1-BASE RowStatus FROM SNMPv2-TC InterfaceIndex FROM IF-MIB ; alcatelIND1VLANStackingMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "The parameters for configuration of the VLAN Stacking feature, including the association between ports and svlans. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" ::= { softentIND1VlanStackingMgt 1} alcatelIND1VLANStackingMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Stacking Managed Objects." ::= { alcatelIND1VLANStackingMIB 1 } alcatelIND1VLANStackingMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Stacking Conformance Information." ::= { alcatelIND1VLANStackingMIB 2 } alcatelIND1VLANStackingMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Stacking Units Of Conformance." ::= { alcatelIND1VLANStackingMIBConformance 1 } alcatelIND1VLANStackingMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Stacking Compliance Statements." ::= { alcatelIND1VLANStackingMIBConformance 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- The VLAN Stacking Port Table alaVlanStackingPort OBJECT IDENTIFIER ::= { alcatelIND1VLANStackingMIBObjects 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaVstkPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVstkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains port-specific information for the VLAN Stacking feature. An entry in this table is created when a port is configured with VLAN stacking capability, OR when a port is configured with a specific vendor ethertype, a particular bridge protocol action." ::= { alaVlanStackingPort 1 } alaVstkPortEntry OBJECT-TYPE SYNTAX AlaVstkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VLAN Stacking port entry." INDEX { alaVstkPortNumber } ::= { alaVstkPortTable 1 } AlaVstkPortEntry ::= SEQUENCE { alaVstkPortNumber InterfaceIndex, alaVstkPortType INTEGER, alaVstkPortVendorTpid Integer32, alaVstkPortBpduTreatment INTEGER, alaVstkPortAcceptFrameType INTEGER, alaVstkPortLookupMiss INTEGER, alaVstkPortDefaultSvlan INTEGER, alaVstkPortRowStatus RowStatus, alaVstkPortLegacyStpBpdu INTEGER } alaVstkPortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The port ifindex of the port for which this entry contains VLAN Stacking management information. " ::= { alaVstkPortEntry 1 } alaVstkPortType OBJECT-TYPE SYNTAX INTEGER { userCustomer (1), userProvider (2), network (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of this VLAN Stacking port. User-customer (1) is a VLAN Stacking user port connected to customer network. User-provider (2) is a VLAN Stacking user port used to run provider management traffic. Network (2) indicates a network facing port." DEFVAL { userCustomer } ::= { alaVstkPortEntry 2 } alaVstkPortVendorTpid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The TPID for this port. It is used for the incoming data traffic parsing and it is substituted to the 802.1Q standard Tpid for the outgoing data traffic. This is used for compatibility with other vendor equipment. The default value is the standard value 0x88a8." DEFVAL { 34984 } ::= { alaVstkPortEntry 3 } alaVstkPortBpduTreatment OBJECT-TYPE SYNTAX INTEGER { flooded (1), dropped (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The customer bpdu treatment for this port. It defines the type of processing applied to the user's bridge protocol data unit. The bridge protocol treatment (flooded) floods any user's bridge protocol data unit to all user ports and network ports on the same SVLAN. The bridge protocol (dropped) drops any user's bridge protocol data unit." DEFVAL { flooded } ::= { alaVstkPortEntry 4 } alaVstkPortAcceptFrameType OBJECT-TYPE SYNTAX INTEGER { tagged (1), untagged (2), all (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The acceptable frame types on this port." DEFVAL { all } ::= { alaVstkPortEntry 5 } alaVstkPortLookupMiss OBJECT-TYPE SYNTAX INTEGER { drop (1), default (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Treatment of tagged packets upon vlan lookup miss. Drop (1) means that on lookup miss the packets will be dropped. Default (2) means that on lookup miss the default SVLAN for that port will be used to tunnel the packets. This is significant only for user port." DEFVAL { default } ::= { alaVstkPortEntry 6 } alaVstkPortDefaultSvlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The default svlan of this port." ::= { alaVstkPortEntry 7 } alaVstkPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this table entry. The supported value supported for set are createAndGo (4) and destroy(6), to create or remove a vlan-stacking port." ::= { alaVstkPortEntry 8 } alaVstkPortLegacyStpBpdu OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The legacy STP BPDU treatment for this port. It defines the type of processing applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be enabled/disabled by this object.By default the value is disabled i.e provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports." DEFVAL { disable } ::= { alaVstkPortEntry 9 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- The VLAN Stacking svlan/port association Table alaVlanStackingSvlanPort OBJECT IDENTIFIER ::= { alcatelIND1VLANStackingMIBObjects 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaVstkSvlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVstkSvlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains svlan/ipmvlan-port association for the VLAN Stacking feature." ::= { alaVlanStackingSvlanPort 1 } alaVstkSvlanPortEntry OBJECT-TYPE SYNTAX AlaVstkSvlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The svlan/ipmvlan-port association." INDEX { alaVstkSvlanPortSvlanNumber, alaVstkSvlanPortPortNumber, alaVstkSvlanPortCvlanNumber} ::= { alaVstkSvlanPortTable 1 } AlaVstkSvlanPortEntry ::= SEQUENCE { alaVstkSvlanPortSvlanNumber INTEGER, alaVstkSvlanPortPortNumber InterfaceIndex, alaVstkSvlanPortCvlanNumber INTEGER, alaVstkSvlanPortMode INTEGER, alaVstkSvlanPortRowStatus RowStatus } alaVstkSvlanPortSvlanNumber OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Number identifying the svlan/ipmvlan." ::= { alaVstkSvlanPortEntry 1 } alaVstkSvlanPortPortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The port ifindex of the port associated to the svlan/ipmvlan." ::= { alaVstkSvlanPortEntry 2 } alaVstkSvlanPortCvlanNumber OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The customer vlan id associated to the svlan/ipmvlan." ::= { alaVstkSvlanPortEntry 3 } alaVstkSvlanPortMode OBJECT-TYPE SYNTAX INTEGER { doubleTag (1), translate (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan stacking mode: double tagging (1) or vlan translation/mapping (2). Only translation mode is valid in case of IPM Vlans" ::= { alaVstkSvlanPortEntry 4 } alaVstkSvlanPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove an svlan-port association." ::= { alaVstkSvlanPortEntry 5 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- COMPLIANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1VLANStackingMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for VLAN Stacking." MODULE MANDATORY-GROUPS { vlanStackingPortGroup, vlanStackingSvlanPortGroup } ::= { alcatelIND1VLANStackingMIBCompliances 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- UNITS OF CONFORMANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanStackingPortGroup OBJECT-GROUP OBJECTS { alaVstkPortNumber, -- The VLAN Stacking Port Table alaVstkPortType, alaVstkPortVendorTpid, alaVstkPortBpduTreatment, alaVstkPortAcceptFrameType, alaVstkPortLookupMiss, alaVstkPortDefaultSvlan, alaVstkPortRowStatus } STATUS current DESCRIPTION "Collection of objects for management of VLAN Stacking Ports." ::= { alcatelIND1VLANStackingMIBGroups 1 } vlanStackingSvlanPortGroup OBJECT-GROUP OBJECTS { alaVstkSvlanPortSvlanNumber, alaVstkSvlanPortPortNumber, alaVstkSvlanPortCvlanNumber, alaVstkSvlanPortMode, alaVstkSvlanPortRowStatus } STATUS current DESCRIPTION "Collection of objects for svlan-port associations." ::= { alcatelIND1VLANStackingMIBGroups 2 } END