ALCATEL-IND1-VRRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32 FROM SNMPv2-SMI RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF softentIND1Vrrp FROM ALCATEL-IND1-BASE ifIndex, InterfaceIndexOrZero FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB vrrpOperVrId, vrrpOperEntry FROM VRRP-MIB alaVrrp3OperVrId, alaVrrp3OperIpVersion, alaVrrp3OperEntry FROM ALCATEL-IND1-VRRP3-MIB; alcatelIND1VRRPMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary VRRP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { softentIND1Vrrp 1 } alcatelIND1VRRPMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIB 1 } -- ******************************************************************* -- Textual Conventions -- ******************************************************************* AlaVrTrackId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number that serves to uniquely identify a tracking policy." SYNTAX Integer32 (1..255) AlaVrGroupId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number that serves to uniquely identify a virtual router group." SYNTAX Integer32 (1..255) -- -- Alcatel VRRP Configuration -- alaVRRPConfig OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 1 } alaVrrpTracking OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 2 } alaVrrpOperations OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 3 } alaVRRPv2Config OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 4 } alaVrrpGroup OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 5 } alaVRRPStartDelay OBJECT-TYPE SYNTAX Integer32 (0..180) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Once VRRP's initial configuration is complete at startup, this object specifies the number of seconds VRRP will delay before leaving the initialize state. This delay is to allow external protocols (spanning tree, OSPF, etc.) time to converge so that when a VRRP virtual router becomes master it will be able to forward traffic." DEFVAL { 30 } ::= { alaVRRPConfig 1 } alaVrrpBfdStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the BFD for VRRP." ::= { alaVRRPConfig 2} alaVRRPDefaultInterval OBJECT-TYPE SYNTAX Integer32 (1..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The VRRP Router default time interval, in seconds, between sending advertisement messages." DEFVAL { 1 } ::= { alaVRRPv2Config 1 } alaVRRPDefaultPriority OBJECT-TYPE SYNTAX Integer32 (1..254) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VRRP Router default priority to be used for the virtual router master election process. Higher values imply higher priority." DEFVAL { 100 } ::= { alaVRRPv2Config 2 } alaVRRPDefaultPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The VRRP Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { alaVRRPv2Config 3 } alaVRRPAdminState OBJECT-TYPE SYNTAX INTEGER { allEnable(1), enable(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to force a change in to the vrrpOperAdminState of virtual routers in the vrrpOperTable. Setting a value of allEnable will cause the vrrpOperAdminState of each entry in the table to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set." ::= { alaVRRPv2Config 4 } alaVRRPSetParam OBJECT-TYPE SYNTAX INTEGER { none(1), all(2), interval(3), priority(4), preempt(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to force the virtual routers in the vrrpOperTable to revert to the default parameter values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. Unless alaVRRPOverride is set to true only virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set." ::= { alaVRRPv2Config 5 } alaVRRPOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used in combination with the alaVRRPSetParam object to force all virtual routers in the vrrpOperTable to revert to the default values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. This object is of little value when read but will return the last value to which it was set." ::= { alaVRRPv2Config 6 } -- ******************************************************************* -- Start of VRRP Tracking MIB objects -- ******************************************************************* -- ******************************************************************* -- VRRP Tracking Policy Table -- ******************************************************************* alaVrrpTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrpTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VRRP Tracking Policy table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpTrackEntry' items." ::= { alaVrrpTracking 1 } alaVrrpTrackEntry OBJECT-TYPE SYNTAX AlaVrrpTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vrrpTrackTable containing the operational characteristics of a VRRP tracking policy. Rows in the table cannot be modified unless the value of `vrrpTrackAdminState' is `disabled'." INDEX { alaVrrpTrackId } ::= { alaVrrpTrackTable 1 } AlaVrrpTrackEntry ::= SEQUENCE { alaVrrpTrackId AlaVrTrackId, alaVrrpTrackState INTEGER, alaVrrpTrackAdminState INTEGER, alaVrrpTrackEntityType INTEGER, alaVrrpTrackEntityVlan INTEGER, alaVrrpTrackEntityPort InterfaceIndexOrZero, alaVrrpTrackEntityIpAddress IpAddress, alaVrrpTrackPriority Integer32, alaVrrpTrackRowStatus RowStatus, alaVrrpTrackEntityInterface InterfaceIndexOrZero, alaVrrpTrackEntityIpv6Interface InterfaceIndexOrZero, alaVrrpTrackEntityIpAddrType InetAddressType, alaVrrpTrackEntityIpAddr InetAddress, alaVrrpTrackBfdStatus INTEGER } alaVrrpTrackId OBJECT-TYPE SYNTAX AlaVrTrackId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Tracking Policy Identifier (TRACKID)." ::= { alaVrrpTrackEntry 1 } alaVrrpTrackState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The conditional state of the tracking policy entity." ::= { alaVrrpTrackEntry 2 } alaVrrpTrackAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object will enable/disable the tracking policy function." DEFVAL { enable } ::= { alaVrrpTrackEntry 3 } alaVrrpTrackEntityType OBJECT-TYPE SYNTAX INTEGER { vlan(1), port(2), ipaddress(3), interface(4), ipv6Interface(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the tracking policy entity type currently in use." ::= { alaVrrpTrackEntry 4 } alaVrrpTrackEntityVlan OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object contains the Tracking Policy Entity. A vlan id. The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type." ::= { alaVrrpTrackEntry 5 } alaVrrpTrackEntityPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the Tracking Policy Entity. A port ifIndex or 0 if not significant. The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type." ::= { alaVrrpTrackEntry 6 } alaVrrpTrackEntityIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object contains the Tracking Policy Entity. IP Address. The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type." ::= { alaVrrpTrackEntry 7 } alaVrrpTrackPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the value by which the priority of virtual routers associated with the tracking policy will be decremented when the tracked entity's operational state transitions from up to down, or will be incremented when the tracked entity's operational state transitions from down to up." DEFVAL { 25 } ::= { alaVrrpTrackEntry 8 } alaVrrpTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpTrackRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instances of `vrrpTrackId', and either one of : alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, or alaVrrpTrackEntityInterface have been set." ::= { alaVrrpTrackEntry 9 } alaVrrpTrackEntityInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the Tracking Policy Entity. An interface. The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type." ::= { alaVrrpTrackEntry 10 } alaVrrpTrackEntityIpv6Interface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the Tracking Policy Entity. An Ipv6 interface. The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type." ::= { alaVrrpTrackEntry 11 } alaVrrpTrackEntityIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the Tracking Policy Entity IP Address type." ::= { alaVrrpTrackEntry 12 } alaVrrpTrackEntityIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the Tracking Policy Entity. An IPv4 for or IPv6 Address based on alaVrrpTrackEntityIpAddrType. The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type." ::= { alaVrrpTrackEntry 13 } alaVrrpTrackBfdStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Enables BFD for a VRRP track." ::= { alaVrrpTrackEntry 14} -- ******************************************************************* -- VRRP Associated Tracking Policy Table -- ******************************************************************* alaVrrpAssoTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrpAssoTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of tracking policies associated with this virtual router." ::= { alaVrrpTracking 2 } alaVrrpAssoTrackEntry OBJECT-TYPE SYNTAX AlaVrrpAssoTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrpTrackCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the 'vrrpOperState' has transitioned to `initialize'." INDEX { ifIndex, vrrpOperVrId, alaVrrpAssoTrackId } ::= { alaVrrpAssoTrackTable 1 } AlaVrrpAssoTrackEntry ::= SEQUENCE { alaVrrpAssoTrackId AlaVrTrackId, alaVrrpAssoTrackRowStatus RowStatus } alaVrrpAssoTrackId OBJECT-TYPE SYNTAX AlaVrTrackId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the tracking policy the virtual router is responsible for monitoring." ::= { alaVrrpAssoTrackEntry 1 } alaVrrpAssoTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent." ::= { alaVrrpAssoTrackEntry 2 } -- ******************************************************************* -- VRRP Group Table -- ******************************************************************* alaVrrpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VRRP Group table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpGroupEntry' items." ::= { alaVrrpGroup 1 } alaVrrpGroupEntry OBJECT-TYPE SYNTAX AlaVrrpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vrrpGroupTable containing the characteristics of a VRRP group." INDEX { alaVrrpGroupId } ::= { alaVrrpGroupTable 1 } AlaVrrpGroupEntry ::= SEQUENCE { alaVrrpGroupId AlaVrGroupId, alaVrrpGroupInterval Integer32, alaVrrpGroupPriority Integer32, alaVrrpGroupPreemptMode TruthValue, alaVrrpGroupAdminState INTEGER, alaVrrpGroupSetParam INTEGER, alaVrrpGroupOverride TruthValue, alaVrrpGroupRowStatus RowStatus } alaVrrpGroupId OBJECT-TYPE SYNTAX AlaVrGroupId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Tracking Policy Identifier (GROUPID)." ::= { alaVrrpGroupEntry 1 } alaVrrpGroupInterval OBJECT-TYPE SYNTAX Integer32 (1..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP Group time interval, in seconds, between sending advertisement messages." DEFVAL { 1 } ::= { alaVrrpGroupEntry 2 } alaVrrpGroupPriority OBJECT-TYPE SYNTAX Integer32 (1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the VRRP Group priority to be used for the virtual router master election process. Higher values imply higher priority." DEFVAL { 100 } ::= { alaVrrpGroupEntry 3 } alaVrrpGroupPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { alaVrrpGroupEntry 4 } alaVrrpGroupAdminState OBJECT-TYPE SYNTAX INTEGER { allEnable(1), enable(2), disable(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to force a change in to the vrrpOperAdminState of virtual routers in the corresponding alaVRRPAssoGroupTable entry. Setting a value of allEnable will cause the vrrpOperAdminState of each vrrpOperEntry to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers in the group whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVrrpGroupAdminState or alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set." ::= { alaVrrpGroupEntry 5 } alaVrrpGroupSetParam OBJECT-TYPE SYNTAX INTEGER { none(1), all(2), interval(3), priority(4), preempt(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to force the virtual routers in the corresponding alaVRRPAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. Unless alaVrrpGroupOverride is set to true only virtual routers previously configured with default or group parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set." ::= { alaVrrpGroupEntry 6 } alaVrrpGroupOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used in combination with the alaVrrpGroupSetParam object to force all virtual routers in the corresponding alaVrrpAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. This object is of little value when read but will return the last value to which it was set." ::= { alaVrrpGroupEntry 7 } alaVrrpGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `alaVrrpGroupRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `alaVrrpGroupId' has been set." ::= { alaVrrpGroupEntry 8 } -- ******************************************************************* -- VRRP Associated Group Table -- ******************************************************************* alaVrrpAssoGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrpAssoGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of virtual routers associated with this group." ::= { alaVrrpGroup 2 } alaVrrpAssoGroupEntry OBJECT-TYPE SYNTAX AlaVrrpAssoGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains a virtual router id that is associated with a virtual router group." INDEX { alaVrrpGroupId, ifIndex, vrrpOperVrId } ::= { alaVrrpAssoGroupTable 1 } AlaVrrpAssoGroupEntry ::= SEQUENCE { alaVrrpAssoGroupRowStatus RowStatus } alaVrrpAssoGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group. Destroying the entry or setting it to notInService(2) removes the associated virtual router from the group. The use of other values is implementation-dependent." ::= { alaVrrpAssoGroupEntry 1 } -- **************************************************************** -- Extention of the Vrrp Oper Table from the standard mib -- **************************************************************** alaVrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router configuration info." ::= { alaVrrpOperations 1 } alaVrrpOperEntry OBJECT-TYPE SYNTAX AlaVrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, config information about a given virtual router." AUGMENTS { vrrpOperEntry } ::= { alaVrrpOperTable 1 } AlaVrrpOperEntry ::= SEQUENCE { alaVrrpCurrentPriority Integer32, alaVrrpTrackCount Integer32, alaVrrpGroupIdent Integer32 } alaVrrpCurrentPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es)." ::= { alaVrrpOperEntry 1 } alaVrrpTrackCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tracking policies associated with a virtual router." ::= { alaVrrpOperEntry 2 } alaVrrpGroupIdent OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group." ::= { alaVrrpOperEntry 3 } -- ******************************************************************* -- VRRP3 Associated Tracking Policy Table -- ******************************************************************* alaVrrp3AssoTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrp3AssoTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of tracking policies associated with this virtual router." ::= { alaVrrpTracking 3 } alaVrrp3AssoTrackEntry OBJECT-TYPE SYNTAX AlaVrrp3AssoTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given IP Version, VrId, and ifIndex will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrp3TrackCount'). Rows in the table cannot be modified unless the value of `alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'." INDEX { alaVrrp3OperIpVersion, alaVrrp3OperVrId, ifIndex, alaVrrp3AssoTrackId } ::= { alaVrrp3AssoTrackTable 1 } AlaVrrp3AssoTrackEntry ::= SEQUENCE { alaVrrp3AssoTrackId AlaVrTrackId, alaVrrp3AssoTrackRowStatus RowStatus } alaVrrp3AssoTrackId OBJECT-TYPE SYNTAX AlaVrTrackId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the tracking policy the virtual router is responsible for monitoring." ::= { alaVrrp3AssoTrackEntry 1 } alaVrrp3AssoTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent." ::= { alaVrrp3AssoTrackEntry 2 } -- **************************************************************** -- Extention of the alaVrrp3OperTable from the Alcatel VRRP3 mib -- **************************************************************** alaVrrp3OperExTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrp3OperExEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router configuration info." ::= { alaVrrpOperations 2 } alaVrrp3OperExEntry OBJECT-TYPE SYNTAX AlaVrrp3OperExEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, config information about a given virtual router." AUGMENTS { alaVrrp3OperEntry } ::= { alaVrrp3OperExTable 1 } AlaVrrp3OperExEntry ::= SEQUENCE { alaVrrp3CurrentPriority Integer32, alaVrrp3TrackCount Integer32, alaVrrp3GroupIdent Integer32 } alaVrrp3CurrentPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es)." ::= { alaVrrp3OperExEntry 1 } alaVrrp3TrackCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tracking policies associated with a virtual router." ::= { alaVrrp3OperExEntry 2 } alaVrrp3GroupIdent OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group." ::= { alaVrrp3OperExEntry 3 } -- -- conformance information -- alcatelIND1VRRPMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIB 2 } alcatelIND1VRRPMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBConformance 1 } alcatelIND1VRRPMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBConformance 2 } alaVRRPCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for switches with Alcatel VRRP and implementing ALCATEL-IND1-VRRP-MIB." MODULE MANDATORY-GROUPS { alaVRRPConfigGroup } ::= { alcatelIND1VRRPMIBCompliances 1 } -- -- units of conformance -- alaVRRPConfigGroup OBJECT-GROUP OBJECTS { alaVRRPStartDelay, alaVrrpBfdStatus } STATUS current DESCRIPTION "A collection of objects to support management of Alcatel VRRP." ::= { alcatelIND1VRRPMIBGroups 1 } END