ALCATEL-IND1-VRRP3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32 FROM SNMPv2-SMI RowStatus, MacAddress, TruthValue, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF softentIND1Vrrp FROM ALCATEL-IND1-BASE ifIndex FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB VrId FROM VRRP-MIB; alcatelIND1VRRP3MIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Proprietary VRRP MIB definitions for simultaneous support of IPv4 and IPv6 protocols. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" -- 02 April 2007 DESCRIPTION "The latest version of this MIB Module." ::= { softentIND1Vrrp 2 } -- -- VRRP MIB Groups -- alaVrrp3Operations OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 1 } alaVrrp3Statistics OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 2 } alaVrrp3Conformance OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 3 } -- -- Start of MIB objects -- alaVrrp3NotificationCntl OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the VRRP-enabled router will generate SNMP traps for events defined in this MIB. 'Enabled' results in SNMP traps; 'disabled', no traps are sent." DEFVAL { enabled } ::= { alaVrrp3Operations 1 } -- -- VRRP Operations Table -- alaVrrp3OperTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrp3OperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'alaVrrp3OperEntry' items." ::= { alaVrrp3Operations 2 } alaVrrp3OperEntry OBJECT-TYPE SYNTAX AlaVrrp3OperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alaVrrp3OperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IP version, VRID, and ifIndex. Note that rows in this table can be distinguished on a Multi-stacked device running both VRRP over IPv4 and IPv6 interfaces. Rows in the table cannot be modified unless the value of 'alaVrrp3OperAdminState' is 'disabled' and the 'alaVrrp3OperState' has transitioned to 'initialize'" INDEX { alaVrrp3OperIpVersion, alaVrrp3OperVrId, ifIndex } ::= { alaVrrp3OperTable 1 } AlaVrrp3OperEntry ::= SEQUENCE { alaVrrp3OperIpVersion INTEGER, alaVrrp3OperVrId VrId, alaVrrp3OperVirtualMacAddr MacAddress, alaVrrp3OperState INTEGER, alaVrrp3OperAdminState INTEGER, alaVrrp3OperPriority Integer32, alaVrrp3OperVersion INTEGER, alaVrrp3OperIpAddrCount Integer32, alaVrrp3OperMasterIpAddrType InetAddressType, alaVrrp3OperMasterIpAddr InetAddress, alaVrrp3OperPrimaryIpAddrType InetAddressType, alaVrrp3OperPrimaryIpAddr InetAddress, alaVrrp3OperAdvInterval Integer32, alaVrrp3OperPreemptMode TruthValue, alaVrrp3OperAcceptMode TruthValue, alaVrrp3OperUpTime TimeStamp, alaVrrp3OperRowStatus RowStatus } alaVrrp3OperIpVersion OBJECT-TYPE SYNTAX INTEGER { ipv4 (1), ipv6 (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the IP version on which this VRRP instance is running." ::= { alaVrrp3OperEntry 1 } alaVrrp3OperVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { alaVrrp3OperEntry 2 } alaVrrp3OperVirtualMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual MAC address of the virtual router. Although this object can be derived from the 'alaVrrp3OperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps." ::= { alaVrrp3OperEntry 3 } alaVrrp3OperState OBJECT-TYPE SYNTAX INTEGER { initialize (1), backup (2), master (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `alaVrrp3OperAdminState' object (below) Initiates transitions in the value of this object." ::= { alaVrrp3OperEntry 4 } alaVrrp3OperAdminState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `alaVrrp3OperPriority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state. The `alaVrrp3OperAdminState' object must be set to `down' prior to modifying the other read-create objects in the conceptual row. The value of the alaVrrp3OperRowStatus' object (below) must be `active', signifying that the conceptual row is valid (i.e., the objects are correctly set), in order for this object to be set to `up'." DEFVAL { down } ::= { alaVrrp3OperEntry 5 } alaVrrp3OperPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es)." DEFVAL { 100 } ::= { alaVrrp3OperEntry 6 } alaVrrp3OperVersion OBJECT-TYPE SYNTAX INTEGER { vrrpv2 (1), vrrpv3 (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the VRRP version this VRRP instance is running." ::= { alaVrrp3OperEntry 7 } alaVrrp3OperIpAddrCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP addresses associated with this virtual router. This number is equal to the number of rows in the alaVrrp3AssoIpAddrTable that correspond to a given combination of IP version, VRID, and ifIndex." ::= { alaVrrp3OperEntry 8 } alaVrrp3OperMasterIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the type of alaVrrp3OperMasterIpAddr in this row." ::= { alaVrrp3OperEntry 9 } alaVrrp3OperMasterIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The master router's real (primary for vrrp over IPv4) IP address. This is the IP address listed as the source in the advertisement last received by this virtual router. For IPv6, a link local address." ::= { alaVrrp3OperEntry 10 } alaVrrp3OperPrimaryIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the the type of alaVrrp3OperPrimaryIpAddr in this row." ::= { alaVrrp3OperEntry 11 } alaVrrp3OperPrimaryIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "For VRRP over IPv6 this is the link local address for a given ifIndex. For VRRP over IPv4, in the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the alaVrrp3OperMasterIpAddr', should the virtual router transition from backup to master." DEFVAL { '00000000'H } -- 0.0.0.0 or :: ::= { alaVrrp3OperEntry 12 } alaVrrp3OperAdvInterval OBJECT-TYPE SYNTAX Integer32 (1..4095) UNITS "centiseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval, in centiseconds, between sending advertisement messages. Only the master router sends VRRP advertisements." DEFVAL { 100 } ::= { alaVrrp3OperEntry 13 } alaVrrp3OperPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { alaVrrp3OperEntry 14 } alaVrrp3OperAcceptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a virtual router in the master state will accept packets addressed to the address owner's IPv6 address as its own it it is not the IP address owner. This is required only for rows indicating VRRP over IPv6. This object can be sparse and should not be implemented for rows indicating VRRP for Ipv4." DEFVAL { true } ::= { alaVrrp3OperEntry 15 } alaVrrp3OperUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This is the value of the `sysUpTime' object when this virtual router (i.e., the `alaVrrp3OperState') transitioned out of `initialized'." ::= { alaVrrp3OperEntry 16 } alaVrrp3OperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the alaVrrp3OperTable is constrained by the operational state of the corresponding virtual router. When `alaVrrp3OperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `alaVrrp3OperAdminState', can be modified. Prior to setting the `alaVrrp3OperRowStatus' object from `active' to a different value, the `alaVrrp3OperAdminState' object must be set to `down' and the `alaVrrp3OperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `alaVrrp3OperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `alaVrrp3OperVrId' has been set and there is at least one active row in the `alaVrrp3AssoIpAddrTable' defining an associated IP address for the virtual router." ::= { alaVrrp3OperEntry 17 } -- -- VRRP Associated Address Table -- alaVrrp3AssoIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVrrp3AssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addresses associated with this virtual router." ::= { alaVrrp3Operations 3 } alaVrrp3AssoIpAddrEntry OBJECT-TYPE SYNTAX AlaVrrp3AssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrId, and ifIndex will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'alaVrrp3OperIpAddrCount'). Rows in the table cannot be modified unless the value of `alaVrrp3OperAdminState' is `disabled' and the `alaVrrp3OperState' has transitioned to`initialize'." INDEX { alaVrrp3OperIpVersion, alaVrrp3OperVrId, ifIndex, alaVrrp3AssoIpAddrType, alaVrrp3AssoIpAddr } ::= { alaVrrp3AssoIpAddrTable 1 } AlaVrrp3AssoIpAddrEntry ::= SEQUENCE { alaVrrp3AssoIpAddrType InetAddressType, alaVrrp3AssoIpAddr InetAddress, alaVrrp3AssoIpAddrRowStatus RowStatus } alaVrrp3AssoIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP addresses type of alaVrrp3AssoIpAddr in this row." ::= { alaVrrp3AssoIpAddrEntry 1 } alaVrrp3AssoIpAddr OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The assigned IP addresses that a virtual router is responsible for backing up." ::= { alaVrrp3AssoIpAddrEntry 2 } alaVrrp3AssoIpAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated address for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated address from the virtual router. The use of other values is implementation-dependent." ::= { alaVrrp3AssoIpAddrEntry 3 } -- -- VRRP Router Statistics -- alaVrrp3RouterChecksumErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRRP checksum value." ::= { alaVrrp3Statistics 1 } alaVrrp3RouterVersionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an unknown or unsupported version number." ::= { alaVrrp3Statistics 2 } alaVrrp3RouterVrIdErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRID for this virtual router." ::= { alaVrrp3Statistics 3 } -- -- VRRP Router Statistics Table -- alaVrrp3RouterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVRRP3RouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router statistics." ::= { alaVrrp3Statistics 4 } alaVrrp3RouterStatsEntry OBJECT-TYPE SYNTAX AlaVRRP3RouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics information about a given virtual router." INDEX { alaVrrp3OperIpVersion, alaVrrp3OperVrId, ifIndex } ::= { alaVrrp3RouterStatsTable 1 } AlaVRRP3RouterStatsEntry ::= SEQUENCE { alaVrrp3StatsBecomeMaster Counter32, alaVrrp3StatsAdvertiseRcvd Counter32, alaVrrp3StatsAdvIntervalErrors Counter32, alaVrrp3StatsIpTtlErrors Counter32, alaVrrp3StatsPriZeroPktsRcvd Counter32, alaVrrp3StatsPriZeroPktsSent Counter32, alaVrrp3StatsInvldTypePktsRcvd Counter32, alaVrrp3StatsAddressListErrors Counter32, alaVrrp3StatsInvldAuthType Counter32, alaVrrp3StatsPacketLengthErrors Counter32 } alaVrrp3StatsBecomeMaster OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times that this virtual router's state has transitioned to MASTER." ::= { alaVrrp3RouterStatsEntry 1 } alaVrrp3StatsAdvertiseRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisements received by this virtual router." ::= { alaVrrp3RouterStatsEntry 2 } alaVrrp3StatsAdvIntervalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router." ::= { alaVrrp3RouterStatsEntry 3 } alaVrrp3StatsIpTtlErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. It also indicates the number of VRRPv3 packets received by the virtual router with IPv6 hop limit not equal to 255." ::= { alaVrrp3RouterStatsEntry 4 } alaVrrp3StatsPriZeroPktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with a priority of '0'." ::= { alaVrrp3RouterStatsEntry 5 } alaVrrp3StatsPriZeroPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets sent by the virtual router with a priority of '0'." ::= { alaVrrp3RouterStatsEntry 6 } alaVrrp3StatsInvldTypePktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VRRP packets received by the virtual router with an invalid value in the 'type' field." ::= { alaVrrp3RouterStatsEntry 7 } alaVrrp3StatsAddressListErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received for which the address list does not match the locally configured list for the virtual router." ::= { alaVrrp3RouterStatsEntry 8 } alaVrrp3StatsInvldAuthType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with 'Auth Type' not equal to Authentication Type 0, No Authentication. This is required only for rows indicating VRRP over IPv4. This object can be sparse and should not be implemented for rows indicating VRRP for Ipv6." ::= { alaVrrp3RouterStatsEntry 9 } alaVrrp3StatsPacketLengthErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a packet length less than the length of the VRRP header." ::= { alaVrrp3RouterStatsEntry 10 } -- -- Trap Definitions -- alaVrrp3Notifications OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 0 } --- --- Objects used in the traps --- alaVrrp3TrapNewMasterReason OBJECT-TYPE SYNTAX INTEGER { priority (0), preempted (1), masterNoResponse (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This indicates the reason for NewMaster trap. Used by alaVrrp3TrapNewMaster trap." ::= { alaVrrp3Operations 4 } alaVrrp3TrapProtoErrReason OBJECT-TYPE SYNTAX INTEGER { hopLimitError (0), versionError (1), checksumError (2), vridError (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This indicates the reason for protocol error trap. Used by alaVrrp3TrapProtoError trap." ::= { alaVrrp3Operations 5 } alaVrrp3TrapNewMaster NOTIFICATION-TYPE OBJECTS { alaVrrp3OperMasterIpAddrType, alaVrrp3OperMasterIpAddr, alaVrrp3TrapNewMasterReason } STATUS current DESCRIPTION "The newMaster trap indicates that the sending agent has transitioned to 'Master' state." ::= { alaVrrp3Notifications 1 } alaVrrp3TrapProtoError NOTIFICATION-TYPE OBJECTS { alaVrrp3TrapProtoErrReason } STATUS current DESCRIPTION "The error trap indicates that the sending agent has encountered the protocol error indicated by ErrorReason." ::= { alaVrrp3Notifications 2 } -- -- Conformance Information -- alaVrrp3MIBCompliances OBJECT IDENTIFIER ::= { alaVrrp3Conformance 1 } alaVrrp3MIBGroups OBJECT IDENTIFIER ::= { alaVrrp3Conformance 2 } -- -- Compliance Statements -- alaVrrp3MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for switches with Alcatel VRRP and implementing ALCATEL-IND1-VRRP3-MIB." MODULE -- this module MANDATORY-GROUPS { alaVrrp3OperGroup, alaVrrp3StatsGroup, alaVrrp3TrapInfoGroup, alaVrrp3NotificationsGroup } OBJECT alaVrrp3OperPriority WRITE-SYNTAX Integer32 (1..255) DESCRIPTION "SETable values are from 1 to 255." ::= { alaVrrp3MIBCompliances 1 } -- -- Conformance Groups -- alaVrrp3OperGroup OBJECT-GROUP OBJECTS { alaVrrp3NotificationCntl, alaVrrp3OperVirtualMacAddr, alaVrrp3OperState, alaVrrp3OperAdminState, alaVrrp3OperPriority, alaVrrp3OperVersion, alaVrrp3OperIpAddrCount, alaVrrp3OperMasterIpAddrType, alaVrrp3OperMasterIpAddr, alaVrrp3OperPrimaryIpAddrType, alaVrrp3OperPrimaryIpAddr, alaVrrp3OperAdvInterval, alaVrrp3OperPreemptMode, alaVrrp3OperAcceptMode, alaVrrp3OperUpTime, alaVrrp3OperRowStatus, alaVrrp3AssoIpAddrRowStatus } STATUS current DESCRIPTION "A collection of objects to support management of Alcatel VRRP." ::= { alaVrrp3MIBGroups 1 } alaVrrp3StatsGroup OBJECT-GROUP OBJECTS { alaVrrp3RouterChecksumErrors, alaVrrp3RouterVersionErrors, alaVrrp3RouterVrIdErrors, alaVrrp3StatsBecomeMaster, alaVrrp3StatsAdvertiseRcvd, alaVrrp3StatsAdvIntervalErrors, alaVrrp3StatsPriZeroPktsRcvd, alaVrrp3StatsPriZeroPktsSent, alaVrrp3StatsInvldTypePktsRcvd, alaVrrp3StatsInvldAuthType, alaVrrp3StatsIpTtlErrors, alaVrrp3StatsAddressListErrors, alaVrrp3StatsPacketLengthErrors } STATUS current DESCRIPTION "A collection of objects to support management of Alcatel VRRP." ::= { alaVrrp3MIBGroups 2 } alaVrrp3TrapInfoGroup OBJECT-GROUP OBJECTS { alaVrrp3TrapNewMasterReason, alaVrrp3TrapProtoErrReason } STATUS current DESCRIPTION "A collection of objects to support management of Alcatel VRRP." ::= { alaVrrp3MIBGroups 3 } alaVrrp3NotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { alaVrrp3TrapNewMaster, alaVrrp3TrapProtoError } STATUS current DESCRIPTION "A collection of objects to support management of Alcatel VRRP." ::= { alaVrrp3MIBGroups 4 } END