ASAM-EQUIP-MIB DEFINITIONS ::= BEGIN -- ========================================================================== -- This specification is published by Alcatel-Lucent under Non-Disclosure -- Agreement(s) (NDA) with specific parties and has to be considered as -- Confidential Information as defined in such NDA. -- Alcatel-Lucent reserves the right to revise this document for any reason, -- including but not limited to conformity with standards promulgated by -- various agencies, utilisation of advances in the state of the technical -- areas, or the reflection of changes in the design of any equipment, -- techniques, or procedures described or referred to herein. -- The product specifications and other technical or performance information -- contained herein are subject to change without notice. -- Updates of this document will be issued under the above NDA's. -- Alcatel-Lucent makes no representation or warranty, expressed or implied, -- with respect to the sufficiency, accuracy, or utility of any information -- or opinion contained herein. Alcatel-Lucent expressly advises that any -- use of for any purpose or reliance upon this technical reference is at -- the risk of the user and that Alcatel-Lucent shall not be liable for any -- damage or injury incurred by any person arising out of the sufficiency, -- accuracy, or utility of any information or opinion contained herein. -- This document is not to be construed as a suggestion to any manufacturer -- to modify or change any of its products, nor does this document represent -- any commitment by Alcatel-Lucent to sell or purchase any product. -- Nothing contained herein shall be construed as conferring by implication, -- estoppel, or otherwise any license or right under any patent, whether or -- not the use of any information herein necessarily employs an invention of -- any existing or later issued patent. -- Alcatel-Lucent reserves the right not to offer any or all of these -- products and to withdraw any or all of them at any future time. -- Copyright (C) 2001-2009, Alcatel-Lucent. All Rights Reserved. -- =========================================================================== -- -- MODULE-IDENTITY -- LAST-UPDATED "201512130000Z" -- ORGANIZATION "Alcatel-Lucent" -- CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.com" -- -- REVISION "201702100000Z" -- DESCRIPTION -- "Editor: Bart De Vos -- Reason for change: add support for an RFT-C power module on SX-48U (SRNT-K) -- -- REVISION "201611070000Z" -- DESCRIPTION -- "Editor: Yangxiong Xia -- Reason for change: add new shelf mode ngpon-port-reduced(9) to eqptHolderMode object for isam 7362 SF 16-GW and DF 16-GW Low capacity -- -- REVISION "201610210000Z" -- DESCRIPTION -- "Editor: Lut Mertens -- Reason for change: Replace EqptHolderIndex by EqptPowerSupplyIndex in eqptPowerSupplyId object -- -- REVISION "201610170000Z" -- DESCRIPTION -- Version: 3EC36485EDAA_V5.6.0.0.0 -- Editor: Mani Batta -- Reason for change: RCR: ALU01872170 (Reset LT restart counter) -- Change: Introduced two MIBs- eqptBoardRestartCountPerLt and eqptBoardClearRestartCountPerLt in ASAM-EQUIP-MIB.mib. -- -- REVISION "201608290000Z" -- DESCRIPTION -- "Editor: Weihai LU -- Reason for change: add new shelf mode ngpon_supported(7) and gpon_supported(8) to eqptHolderMode object -- -- -- REVISION "201602080000Z" -- DESCRIPTION -- "Editor: Eirini Tzimi -- Reason for change: add new shelf mode ntbntioextlt-unsupported(4) to eqptHolderMode object -- -- -- REVISION "201512220000Z" -- DESCRIPTION -- "Editor: Qiong K WU -- Reason for change: ALU02004304 (Next generation NT-FANT-G) -- Change: add new eqptPortMappingPhyPortType: cfp(14) -- -- REVISION "201512130000Z" -- DESCRIPTION -- "Editor: Laurent Carlier -- Reason for change: add eqptPowerSupplyTable table -- -- -- REVISION "201404150000Z" -- DESCRIPTION -- "Editor: Bala Amudha Pal Samy -- Changes : -- Added a new mode ntb-unsupported(3) to eqptHolderMode object (ALU01919868) -- -- REVISION "201310230000Z" -- DESCRIPTION -- "Editor: Qiong K WU -- Reason for change: ALU01870122 ISR50 DPoE data path redundancy (Phase I) -- Change: Add new reason for eqptProtElementStandbyStatuschangeReason -- Add new reason for eqptProtGroupLastSwitchoverReason -- -- REVISION "201309180000Z" -- DESCRIPTION -- "Editor: Tom Van Peteghem -- Reason for change: ALU01873072 NELT-B VLAN/QoS resource pooling -- Change: Add eqptBoardPlannedResourceTable -- -- REVISION "201304250000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.6.0.0.3 -- Editor: Karel Meijfroidt -- Reason for change: ALU01815260, Alarm Mechanism Improvement -- Change: change the RANGE in the description of the eqptCustAlarmProfileSeverity. -- -- REVISION "201304090000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.6.0.0.2 -- Editor: Marita Saveyn -- Reason for change: ALU01873776, eqptPortMapping attributes returns NoSuch Instance for ISAM4501, FANT-F board -- Change: EqptPortMappingTable: changes to eqptPortMappingLogPortType (add 4) and eqptPortMappingPhyPortSlot (desc) -- eqptPortMappingPhyPortType (add 13) and eqptPortMappingPhyPortNbr (desc) -- -- REVISION "201303260000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.6.0.0.1 -- Editor: Vanapatla Ramana -- Reason for change: ALU01868639, MIB readiness for 2.5G Expansion links on NRNT-A -- Change: eqptSlotPlannedCapabilityProfile: change to description. -- -- REVISION "201303200000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.6.0.0.0 -- Editor: Long Zhigang -- Changes: Add three new attributes in eqptHolderTable (RCR ALU01814646) -- - eqptHolderSerialNumber -- - eqptHolderVariant -- - eqptHolderICScode -- -- REVISION "201201008000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.5.0.0.0 -- Editor: Dirk De la Marche -- Changes: Change to description of CTRL functionality (NRCD-C introduction) -- -- REVISION "201208220000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.5.0.0.0 -- Editor: Vijayakumar Kanniah -- Changes: eqptHolderMode: change to description (RCR ALU01807846) -- -- -- REVISION "201208100000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.4.0.3.0 -- Editor: Marita Saveyn -- Changes: eqptProtGroupTable: change to description (ALU01810586) -- -- -- REVISION "201202090000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.4.0.0.0 -- Editor: Danny Sioncke -- Changes: Added eqptPortProtectionTable (RCR ALU00123609) -- Added eqptPortProtectionLookupTable (RCR ALU00123609) -- -- -- REVISION "201104290000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.3.0.0.1 -- Editor: Vijayakumar Kanniah -- Changes: Added eqptBoardOperError download-ongoing for supporting NRCD-B Automatic download (IR ALU01198543) -- -- -- REVISION "201103040000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.3.0.0.0 -- Editor: Lieve Dierick -- Changes : -- ALU01096382 : new MIB object to store the intelligent FAN mode (IR ALU01096386) -- -- REVISION "201008090000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.2.0.1.4 -- Editor: Tom Van Peteghem -- Changes : -- ALU00492406 : MIB description of the eqptBoardInventorySerialNumber -- must be extended with year/week info -- -- REVISION "201005110000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.2.0.0.1 -- Editor: Jean Samoise -- Changes : -- AALU00117331 : -- Add scalar global change counter for remote lt portmapping changes. --- -- REVISION "201003290000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.2.0.0.0 -- Editor: Jean Samoise -- Changes : -- AALU00117331 : -- Generate trap at configuration change of the PortMapping data. -- -- -- REVISION "201003040000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.2.0.0.0 -- Editor: Jean SamoiseIR context drop NRNT-A -- Changes : -- ALU00159858 : -- Add eth,vp, mcast to eqptPortMappingPhyPortType --- REVISION "200910010000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.0.0.0.0 -- Editor: Rik Verstraete -- Changes : -- ANTmt71411 ISAM/FTTU Merge Equipment Domain -- Add eqptBoardIfSlotId to eqptBoardTable -- -- REVISION "200908250000Z " -- DESCRIPTION -- "Version: 3EC36485EAAA_V4.1.0.0.2 -- Editor : Peter Van Mele -- Reason for change: ANTmt72355, licensing of load balancing/redundancy -- Change: default value of the NT redundancy protection group is disabled. -- -- REVISION "2009071300000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V4.1.0.0.1 -- Editor: Dirk De la Marche -- Changes : -- eqptProtElementStandbyStatuschangeReason : new additions -- due to NANT-D redundancy (See ANTms38234) -- new values: (18), (19) and (20) -- -- REVISION "20090630" -- DESCRIPTION -- "Version: 3EC36485EAAA_V4.1.0.0.0 -- Editor : Sven Dhuyvetter -- Reason for change: ANTms80204, 'Up/Downlink faceplate nr mapping for O -- Change: Add new PortMapping table definition. -- -- REVISION "2009012210007Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V4.0.0.0.1 -- Editor: Viviane Verswijvel -- Changes : -- eqptProtElementStandbyStatuschangeReason : new desccriptions -- to be compatible with XVPS (See FR ANTmt34321) -- -- REVISION "200803040000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.7.0.0.3 -- Editor: Furqan Haq -- Changes : -- Added a new mode ntio-unsupported(6) to eqptHolderMode object -- Added a new mnemonics NOT_ALLOWED to eqptSlotPlannedType -- Added new error type to eqptBoardOperError for reporting -- BoardInsertedInIncompatibleSlot -- -- REVISION "200803104000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.7.0.0.0 -- Editor: Viviane Verswijvel -- Changes: -- Add 2 new reasons for switch over -- Add reason for standby change state reason -- => Hitless Redundancy R3.7 -- -- REVISION "200711080000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.6.0.0.2 -- Editor: Danny Sioncke -- Changes: -- In eqptBoardTable, eqptBoardDualHostIPAddress and -- eqptBoardDualHostLsmLocation are added. -- REVISION "200707260000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.6.0.0.0 -- Editor: Lu Hao -- Changes: -- Add a new table, eqptBoardThermalSensorTable to eqptEquipmentMIB -- -- REVISION "200707240000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.5.0.0.3 -- Editor: Bo Liu -- Changes: -- restartFromDefaultPresOAM and restartFromDefaultTotal are no longer -- supported in eqptAsamRestart. -- -- REVISION "200706010000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.5.0.0.2 -- Editor: Bo Liu -- Changes: -- Add the new equipment practice LEWW in the description of -- eqptHolderPlannedType. -- -- REVISION "200705230000Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.5.0.0.1 -- Editor: Wang Jianglin -- Changes: -- Add the xVPS identifier to equipment table. -- -- REVISION "200705210900Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.5.0.0.0 -- Editor: Liu Jie -- Changes: -- - Add the test head type for four-wire or two-wire test -- -- -- MODULE-IDENTITY -- LAST-UPDATED "200704241735Z" -- ORGANIZATION "Alcatel" -- CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.be" -- -- DESCRIPTION -- "The ASAM Equipment Management MIB is a vendor-specific MIB that is -- used to manage the equipment (racks, shelves, and pluggable equipment) -- of the ASAM subsystem in the ESAM. -- -- REVISION "200706151600Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.4.0.0.2 -- Editor: Sven Dhuyvetter -- Changes: -- - restartFromDefaultPresOAM and restartFromDefaultTotal no longer -- supported in eqptAsamRestart. -- -- REVISION "200703291600Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.4.0.0.1 -- Editor: Danny Sioncke -- Changes: -- - CTRL added in descriptions where applicable. -- -- REVISION "200702021600Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.4.0.0.0 -- Editor: He Yang -- Changes: -- - Add three parameter in eqptboardtable: eqptBoardLastRestartCause, -- eqptBoardLastRestartTime, eqptBoardRestartNumberOfChanges. -- - Add eqptRestartNumberOfChanges -- -- REVISION "200704241735Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.3.0.2.2 -- Editor: John Chuah -- Changes: -- - reverted EqptTestChainEntry and eqptTestChainShelfToTapUp to -- match the definition that was already shipped since R3.1" -- -- REVISION "200704191800Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.3.0.2.1 -- Editor: Furqan Haq -- Changes: -- - reverted the index order of eqptProfileApplicabilityEntry to -- match the definition that was already shipped since R2.5" -- -- REVISION "200701041600Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.3.0.2.0 -- Editor: Sven Dhuyvetter -- Changes: -- - update DEFVALUE in ALCATEL NOTE. -- -- REVISION "200612182245Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_V3.3.0.1.0 -- Editor: John Chuah -- Changes: -- - increased upper range of eqptMaxRacksPerAsam from 6 to 7 and -- eqptMaxShelvesPerRack from 3 to 4. -- - increased rack and shelf ranges for LEEU, LEUS and LNEU in -- eqptHolderPlannedType. -- -- REVISION "200609161200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E3.3.0.0 -- Editor: Zhu Sunbin -- Changes: -- - eqptProtGroupTable tablesize from 1 row to rows number depending on -- shelf type in Alcatel Notes. -- - eqptProtElementTable tablesize from 2 rows to rows number depending on -- shelf type in Alcatel Notes. -- - eqptProtElementGroupId DEFVALUE from 1 to NA -- - eqptProtGroupId DEFVALUE from 1 to NA -- - added notInService(2) in Alcatel Notes for eqptProtGroupRowStatus -- -- REVISION "200606161200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E3.1.0.0.3 -- Editor: Lucien Marcotte -- Changes: -- - For HYNT, changed eqptMaxSlotsPerShelf from 21 to 22 in Alcatel Notes. -- -- REVISION "200606011200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E3.1.0.0.2 -- Editor: Bo Liu -- Changes: ITSC -- - Added eqptTestChainTable. -- -- REVISION "200605231200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E3.0.0.4 -- Editor: Danny Sioncke -- Changes: - eqptCustAlarmProfile non-REM introduced items put to -- "SUPPORT: NO". -- -- REVISION "200604211200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E3.0.0.3 -- Editor: Danny Sioncke -- Changes: - eqptCustAlarmProfile id changed from nr. 7 to nr. 8, -- solving conflict with eqptTestChainTable (ITSC). -- - references to asamCustAlarm-xxx corrected to -- eqptCustAlarm-xxx -- -- REVISION "200512131200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E3.0.0.2 -- Editor: Sven Dhuyvetter -- Changes: update for 8 PVC (BDFhw31519) -- - add eqptSlotPlannedCapabilityProfile to eqptBoardTable -- - add eqptProfileApplicabilityTable -- - add eqptProfileTable -- - add eqptProfileDescriptionTable -- Editor: Danny Sioncke -- Changes: update for REM (BDFhw36030) -- - add eqptCustAlarmProfileTable -- - add eqptCustAlarmProfileMappingTable -- -- REVISION "200511301200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E3.0.0.1 -- Editor: zhu jianhua -- Changes: update for NEP (BDFhw62300), add eqptHolderMode -- -- REVISION "200509161200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E2.4.0.0 -- Editor: vairamuthu karuppiah -- Changes: "Added eqptBoardOperError sem-power-fail,sem-ups-fail" -- -- REVISION "200506031200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E2.3.0.1 -- Editor: Bart Geldof/Christophe De Ras -- Changes: ODM Framework -- - Added ODM Eqt Boardtype treated as unmanaged board. -- -- REVISION "200504281200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E2.3.0.0 -- Editor: Lucien Marcotte -- Changes: HYNT FGR1.0 (new product release) -- - Added the new Eqt Board current and planned type EXT_MANAGED. -- -- REVISION "200412061200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E2.2.0.0 -- Editor: FAN Min -- Changes: support the eqptProt Table for ISAM R2.2 NT Redundancy Feature -- * eqptProtGroupLastSwitchoverReason : add "LanxFailure(13)"" -- -- REVISION "200411251200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E1.0.0.0 -- Editor: Steven Luykx -- Changes: changes in comment, version is not stepped up" -- -- REVISION "200401291200Z" -- DESCRIPTION -- "Version: 3EC36485EAAA_E1.0.0.0 -- Editor: Rafael Van Driessche -- Changes: first version for ESAM R1.0 and ESAM R1.1" -- -- REVISION "200304241200Z" -- DESCRIPTION -- "Version: 3EC36485AAAA_E5.0.0.3 -- Editor: Eric De Backer -- Changes: -- * eqptBoardInventoryLastFailedTest: change object type to OCTET string -- (BDFaa50395)" -- -- REVISION "200303261200Z" -- DESCRIPTION -- "Version: 3EC36485AAAA_E5.0.1.0 -- Editor: Koen Van de Weyer -- Changes: -- * eqptBoardOperError: add "board-not-licensed" (BDFaa51682)" -- -- REVISION "200309241200Z" -- DESCRIPTION -- "Version: 3EC36485AAAA_E5.0.0.2 -- Editor: Frank Devolder -- Changes: -- * Decrease size of eqptHolderDescription from 255 to 127 bytes -- (BDFaa46015). -- * Remove eqptHwChangeOccurredTrap & eqptProtChangeOccurredTrap -- (BDFaa44804). -- * add initialValue(255) to definition of eqptBoardRestart -- (BDFaa45317). -- -- REVISION "200201151200Z" -- DESCRIPTION -- "Version: 3EC36485AAAA_E5.0.0.1 -- Editor: Frank Devolder -- Changes: -- * eqptHolderAvailStatus: add state "offLine" and remove state -- "unknown". -- * eqptBoardSwOverruleStatus: only supported for LSMs. -- * line-up enum values of: -- eqptBoardOperError & eqptHolderOperError; -- eqptBoardAvailStatus & eqptHolderAvailStatus; -- eqptBoardRestart & eqptAsamRestart. -- * Add object eqptBoardInventoryLastFailedTest. -- * eqptBoardRestart: for ACU boards, only a restart without selftest is -- supported." -- -- REVISION "200106081200Z" -- DESCRIPTION -- "Version: 3EC36485AAAA_E5.0.0.0 -- Editor: Frank Devolder -- Changes: creation of new Equipment MIB for ASAM R5.0." -- -- ============================================================================= IMPORTS IpAddress, TimeTicks, Counter FROM RFC1155-SMI DisplayString, RowStatus, TruthValue FROM SNMPv2-TC asam FROM SYSTEM-MIB OBJECT-TYPE FROM RFC-1212 InterfaceIndex FROM ITF-MIB AsamAlarmSeverityType FROM ASAM-ALARM-MIB AsamNextProfileIndex, AsamProfileRefCount, AsamProfilePointer, AsamProfileIndex, AsamProfileName, NetworkTimeInSeconds FROM ASAM-TC-MIB; -- asam OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6) -- internet(1) private(4) enterprises(1) -- alcatel(637) asd(61) asam(1) } asamEquipmentMIB OBJECT IDENTIFIER ::= { asam 23 } -- MAX-INDEX ::= 2147483647 (= 7FFFFFFF HEX) -- Start type definitions == EqptHolderIndex ::= INTEGER (1..255) EqptPowerSupplyIndex ::= INTEGER (1..255) EqptPowerRftcIndex ::= INTEGER (1..255) EqptPowerRftcLineStatus ::= INTEGER { ok(0), notconnected(1), highimpedant(2), earthfault(3)} EqptHolderIndexOrZero ::= INTEGER (0..255) EqptSlotIndex ::= INTEGER (1..65535) EqptCustAlarmProfileOutputType ::= INTEGER { triggered(1), -- alarm output is triggered notTriggered(2)} -- alarm output is not triggered EqptCustAlarmProfilePolarityType ::= INTEGER { inversed(1), -- inversed alarm polarity normal(2)} -- normal alarm polarity EqptPortMappingIndex ::= INTEGER -- End type definitions == eqptAsam OBJECT IDENTIFIER ::= { asamEquipmentMIB 1 } -- Note on appliques: -- -- The Equipment MIB is only used to manage appliques that are contained -- in LT shelves or combo shelves. Appliques that are contained in separate -- splitter shelves cannot be managed. Therefore, whenever this MIB -- mentions an "applique", it is implicitly understood that this applique -- is contained in the applique area of a combo shelf, or that it is the -- NT-I/O applique in case of an LT shelf. -- ================================================================== -- | START ASAM FIELDS | -- ================================================================== eqptAsamId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Unique identifier of the system. In practice, this attribute contains the serial number of the most recently equipped SMAS board within the main shelf. Notice however that there are also shelves in which the SMAS is replaced by a GFC board (e.g ARAM-B) or even shelves without SMAS/GFC in which the serial number of the ACU is taken. This attribute is used internally by the system in case both NTs start-up simultaneously to determine whether either the database on NT-A or the database on NT-B should be used as the systems database. It's not the intention to make this attribute visible to an operator. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: '' UNITS: -" ::= { eqptAsam 1 } eqptAsamRestart OBJECT-TYPE SYNTAX INTEGER { restartWithSelfTest (1), -- restart with selftest restartWithoutSelfTest (2), -- restart without selftest -- restartFromDefaultPresOAM (3), -- restart with removal of persistent data, but preserving the -- management channel configuration data -- restartFromDefaultTotal (4), -- restart with removal of all persistent data, including the -- management channel configuration data restartHot (5), -- system hot restart initialValue (255) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to restart the system. The persistent data is preserved. Contains previous restart reason, if not available it contains value 255. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: initialValue (255) UNITS: -" ::= { eqptAsam 2 } eqptMaxRacksPerAsam OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is initialized by the system and specifies the maximum number of racks supported by the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..7 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptAsam 3 } eqptMaxShelvesPerRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is initialized by the system and specifies the maximum number of shelves which can be equipped within one rack. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptAsam 4 } eqptMaxSlotsPerShelf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is initialized by the system and specifies the maximum number of regular slots supported by one shelf. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..22 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptAsam 5 } eqptHwNumberOfChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter which indicates the number of configuration or status changes in the Equipment MIB objects. This counter is incremented each time any of the summary table objects change. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptAsam 6 } eqptProtNumberOfChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter which indicates the overall number of status changes in the equipment protection MIB objects. This counter is incremented each time any of the eqptProtGroupNumberOfChanges counters is incremented. ALCATEL NOTE: SUPPORT:YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptAsam 7 } eqptRestartNumberOfChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter which indicates the overall number of status changes in the eqptBoardRestartNumberOfChanges objects in eqptBoardTable. This counter is incremented each time any of the eqptBoardRestartNumberOfChanges counters is incremented. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptAsam 8 } eqptFanMode OBJECT-TYPE SYNTAX INTEGER { default (0), eco (1), protect (2), classic (3) } ACCESS read-write STATUS mandatory DESCRIPTION " Parameter indicates the actually applied FAN tray mode: 'default': the fan packs run in average mode, predefined thermal margins are used for defining/adapting the fan speeds 'eco': the fan packs run in 'green' mode, t.i. the most economical mode, minimal thermal margins wrt default settings 'protect': the fan packs run in a heavy mode, t.i. wider thermal margins wrt default settings 'classic': fixed speed settings apply wrt the fan - no SW control ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { eqptAsam 9 } -- ================================================================== -- | STOP ASAM FIELDS | -- ================================================================== -- ================================================================== -- | START HOLDER TABLE | -- ================================================================== eqptHolderTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptHolderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Equipment holder table, representing the system, the racks and the shelves. This table contains one row for the system, one row per rack, and one row per shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 2 } eqptHolderEntry OBJECT-TYPE SYNTAX EqptHolderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the equipment holder table. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptHolderId } ::= { eqptHolderTable 1 } EqptHolderEntry ::= SEQUENCE { eqptHolderId EqptHolderIndex, eqptHolderClass INTEGER, eqptHolderPlannedType DisplayString, eqptHolderActualType DisplayString, eqptHolderAdminStatus INTEGER, eqptHolderOperStatus INTEGER, eqptHolderOperError INTEGER, eqptHolderAvailStatus INTEGER, eqptHolderDescription DisplayString, eqptHolderContainerId INTEGER, eqptHolderContainerOffset INTEGER, eqptHolderMode INTEGER, eqptHolderSerialNumber DisplayString, eqptHolderVariant DisplayString, eqptHolderICScode DisplayString } eqptHolderId OBJECT-TYPE SYNTAX EqptHolderIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "Index in equipment holder Table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 1 } eqptHolderClass OBJECT-TYPE SYNTAX INTEGER { mainIqHcl (1), -- main shelf supporting both IQ-based and -- HCL-based traffic extIq (2), -- extension shelf supporting only IQ-based traffic extHcl (3), -- extension shelf supporting only HCL-based traffic mainEthernet (4), -- main shelf supporting Ethernet-based traffic extEthernet (5) -- extension shelf supporting Ethernet-based traffic } ACCESS read-write STATUS mandatory DESCRIPTION "Classification of shelves. This object has no meaning for the system and the rack equipment holders. Note: for ISAM, only the values mainEthernet (4) and extEthernet (5) are allowed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 1..5 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 2 } eqptHolderPlannedType OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "A string representing the planned type of equipment holder. If the equipment holder is planned, the string consists of a mnemonic, identifying the holder type. This object is only writable for the entries that represent a shelf. Other entries get a value corresponding to the detected equipment practice type. Following values are valid: System-types: ============= LAUS Large ASAM US market (6 racks, 3 shelves per rack) LAEU Large ASAM EU market (6 racks, 3 shelves per rack) LEEU Large ESAM EU market (7 racks, 4 shelves per rack) LEUS Large ESAM US market (7 racks, 4 shelves per rack) LNEU Large New EquipmentPractise EU market(7 racks, 4 shelves per rack) LEWW Large ESAM World Wide (7 racks, 4 shelves per rack) LNWW Large ESAM World Wide (7 racks, 4 shelves per rack) Rack-types: =========== ALTR-A ADSL Line Termination Rack version A (US) ALTR-E ADSL Line Termination Rack version E (ETSI 2200mm) Shelf-types: ============ A shelf of a specific type. Refer to the ETSI Configurations and US Configurations documents for the list of shelf types that are supported in a given system release. NOT_PLANNED The shelf is not planned. NOT_ALLOWED Shelf planning is not allowed in this position. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: See above PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -" ::= { eqptHolderEntry 3 } eqptHolderActualType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string representing the actual equipment holder type. Following values are possible: Indicates the detected equipment holder-type. Uses same mnemonics as described in object eqptHolderPlannedType. EMPTY Equipment holder is not detected UNKNOWN The type of the detected holder is unknown. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 4 } eqptHolderAdminStatus OBJECT-TYPE SYNTAX INTEGER { unlock(1), lock(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used by the administrator to lock or unlock an equipment holder. This attribute is only supported for shelves. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 1 UNITS: -" ::= { eqptHolderEntry 5 } eqptHolderOperStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute identifies whether or not the equipment holder is capable of performing its normal functions. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 6 } eqptHolderOperError OBJECT-TYPE SYNTAX INTEGER { no-error(1), -- no-error or admin state = Down type-mismatch(2), holder-missing(3), holder-installation-missing(4), defense(15) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes for what reason the equipment holder is not operational. These values correspond with the alarms that are generated in case of a failure. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4, 15 PERSIST: NO DEFVALUE: 1 UNITS: -" ::= { eqptHolderEntry 7 } eqptHolderAvailStatus OBJECT-TYPE SYNTAX INTEGER { available(1), -- equipment holder is available failed (3), -- equipment holder is detected but faulty notInstalled (5), -- equipment holder is not installed offLine (6) -- equipment holder has been disabled } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the equipment holder is available or not. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 8 } eqptHolderDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) ACCESS read-write STATUS mandatory DESCRIPTION "Text-field, which can for instance be used to describe the location of the equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: '' UNITS: -" ::= { eqptHolderEntry 9 } eqptHolderContainerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes in which equipment holder the equipment holder is contained. This object is only meaningful for racks and shelves, since the system itself has no containing equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 10 } eqptHolderContainerOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the position of the equipment holder in the containing equipment holder. This object is only meaningful for racks and shelves, since the system itself has no containing equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 11 } eqptHolderMode OBJECT-TYPE SYNTAX INTEGER{ ntbntio-supported(1), ntbntio-unsupported(2), ntb-unsupported(3), ntbntioextlt-unsupported(4), ntio-unsupported(6), ngpon-supported(7), gpon-supported(8), ngpon-port-reduced(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the holder mode and is used by both the NEP shelf and the ARAM-E shelf: ntbntio-supported: this mode works in the same manner as iSAM XD. The LSM can only be used on LSM slot. NT in NTB is supported. NTIO is also supported. ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as LT slot. So, two more LSM can be supported in this mode. Therefore, NTIO/NTB board is not supported. ntb-unsupported: In this mode, NTB slot can be used as LT slot. So one more LT can be supported in this mode. Therefore, NTB board will not be supported. This mode is applicable for NFXS-B shelf only. ntio-unsupported: In this mode, there is no NTIO; the slot can be used for an LSM. DEFAULTVALUE: The default Value of the eqptHolderMode depends on the shelf type. In the case of ARAM-E, default will be ntio-unsupported. All other shelves will default to ntbntio-supported mode. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: Yes DEFVALUE: See above UNITS: -" ::= { eqptHolderEntry 12 } eqptHolderSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the serial number of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 13 } eqptHolderVariant OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the ALU code of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 14 } eqptHolderICScode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the Item Change Status iteration code of the shelf. NOT available If FIM < 25 in RI, this attribute could not be retrieved. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptHolderEntry 15 } -- ================================================================== -- | STOP HOLDER TABLE | -- ================================================================== -- ================================================================== -- | START BOARD TABLE | -- ================================================================== eqptBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table representing the slots of all planned shelves. Each slot can hold a board of one of the following types: NT, EXT, LSM, ACU, CTRL, applique. This table has a row for each slot in each planned shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 3 } eqptBoardEntry OBJECT-TYPE SYNTAX EqptBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the eqptBoardTable. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptSlotId } ::= { eqptBoardTable 1 } EqptBoardEntry ::= SEQUENCE { eqptSlotId EqptSlotIndex, eqptSlotPlannedType DisplayString, eqptSlotActualType DisplayString, eqptSlotPowerStatus INTEGER, eqptBoardAdminStatus INTEGER, eqptBoardOperStatus INTEGER, eqptBoardOperError INTEGER, eqptBoardAvailStatus INTEGER, eqptBoardRestart INTEGER, eqptBoardSwOverruleStatus INTEGER, eqptBoardContainerId INTEGER, eqptBoardContainerOffset INTEGER, eqptBoardInventoryAlcatelCompanyId DisplayString, eqptBoardInventoryTypeName DisplayString, eqptBoardInventoryPBACode DisplayString, eqptBoardInventoryFPBACode DisplayString, eqptBoardInventoryICScode DisplayString, eqptBoardInventoryCLEICode DisplayString, eqptBoardInventorySerialNumber DisplayString, eqptBoardInventoryLastFailedTest OCTET STRING (SIZE(4)), eqptSlotPlannedCapabilityProfile AsamProfilePointer, eqptBoardCustAlarmProfile AsamProfilePointer, eqptBoardLastRestartCause INTEGER, eqptBoardLastRestartTime NetworkTimeInSeconds, eqptBoardRestartNumberOfChanges Counter, eqptBoardRelatedMgntEntityIPAddress IpAddress, eqptBoardRelatedMgntEntityPairedNumber INTEGER, eqptBoardDualHostIPAddress IpAddress, eqptBoardDualHostLsmLocation EqptHolderIndexOrZero, eqptBoardIfSlotId INTEGER, eqptBoardRestartCountPerLt Counter, eqptBoardClearRestartCountPerLt TruthValue } eqptSlotId OBJECT-TYPE SYNTAX EqptSlotIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value to identify a slot position. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 1 } eqptSlotPlannedType OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that is planned in the slot. If the board is planned, the string consists of a mnemonic that identifies the board-type. Following mnemonics are valid: A board of a specific type. Refer to the ETSI and US Configurations documents for the list of boards that are supported in a given release. ODM board types are planned with the board mnemonic, they are treated as unmanaged boards. EXT_MANAGED The presence of the LT module can be detected but it is not managed by this NT in the HYNT module. The LT type must be planned on the other NT. UNMANAGED Unmanaged board: this means that the presence of the board can be detected and that the board can be reset and powered-down but that it is not possible to establish communication with the board in software. NOT_PLANNED No board is planned in the slot. NOT_ALLOWED Slot planning is not allowed in this position. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -" ::= { eqptBoardEntry 2 } eqptSlotActualType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that is actually present in the slot. Following values are possible: Indicates the detected board-type. Uses same mnemonics as described in object eqptSlotPlannedType. EMPTY No board plugged within this slot. EXT_MANAGED The presence of the LT module can be detected but it is not managed by this NT in the HYNT module. The LT type must be planned on the other NT. UNMANAGED The type of the detected board is unknown and the planned board type is UNMANAGED or ODMboardtype. UNKNOWN The type of the detected board is unknown and the planned board type is not UNMANAGED and the planned board type is not EXT_MANAGED. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 3 } eqptSlotPowerStatus OBJECT-TYPE SYNTAX INTEGER { powerUp(1), powerDown(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used by the operator to power-up or power-down an LSM slot. This attribute is not supported for other type of slots. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: 1 UNITS: -" ::= { eqptBoardEntry 4 } eqptBoardAdminStatus OBJECT-TYPE SYNTAX INTEGER { unlock(1), lock(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used by the operator to lock or unlock the board. This attribute is only supported for the following type of boards: NT (but notice that the system will refuse a request to lock the NT of a simplex system), EXT and LSM (if managed). This attribute has no meaning for an unmanaged or externally managed (EXT_MANAGED) LSM, for an ACU, CTRL or for an applique. An exception is the NRCD-C, CTRL board of the FD-REM, that has LT capabilities next to the regular CTRL capabilities. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: 1 UNITS: -" ::= { eqptBoardEntry 5 } eqptBoardOperStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute informs the operator whether the plug-in unit is able to perform its normal operation. This attribute is supported for all type of boards: NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 6 } eqptBoardOperError OBJECT-TYPE SYNTAX INTEGER { no-error(1), -- no-error or admin state = Down type-mismatch(2), board-missing(3), board-installation-missing(4), no-planned-board(5), waiting-for-sw(6), init-boot-failed(7), init-download-failed(8), init-connection-failed(9), init-configuration-failed(10), board-reset-protection(11), invalid-parameter(12), temperature-alarm(13), tempshutdown(14), defense(15), board-not-licensed(16), sem-power-fail(17), sem-ups-fail(18), board-in-incompatible-slot(19), download-ongoing(21), unknown-error(255) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes for what reason the board is not operational. These values correspond with the alarms which are generated in case of a failure. This attribute is supported for all type of boards: NT, EXT, LSM, ACU, CTRL, applique. Default value is no-error, replaced by result from startup sequence. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..15, 255 PERSIST: NO DEFVALUE: 1 UNITS: -" ::= { eqptBoardEntry 7 } eqptBoardAvailStatus OBJECT-TYPE SYNTAX INTEGER { available(1), -- board is available, after successfull selftest inTest(2), -- during selftest or init, after reset or power up failed(3), -- error, error in selftest or timeout powerOff(4), -- board is powered off notInstalled(5), -- board is not plugged in offLine(6), -- board has been disabled dependency(7) -- board cannot operate because some other resource -- on which it depends is unavailable } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute provides further information regarding the state of the board. It is set to available after a successfull selftest of the board (if applicable). This attribute is supported for all type of boards: NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..7 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 8 } eqptBoardRestart OBJECT-TYPE SYNTAX INTEGER { with-selftest(1), without-selftest(2), hot-restart(5), initialValue (255) } ACCESS read-write STATUS mandatory DESCRIPTION "Writing a valid value to this object will restart the board in the specified mode. This attribute is only supported for the following type of boards: NT, EXT, managed LSM, ACU, CTRL. For ACU and CTRL boards, only a restart without selftest is supported. An exception is the NRCD-C, FD-REM CTRL board, that has LT capabilities (restart with/without selftest) next to the regular CTRL capabilities. Contains previous restart reason, if not available it has value 255. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1, 2, 5, 255 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 9 } eqptBoardSwOverruleStatus OBJECT-TYPE SYNTAX INTEGER { no-overrule(1), overrule(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to overrule the default software version for this board. This attribute is only supported for managed LSMs. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: NO DEFVALUE: 1 UNITS: -" ::= { eqptBoardEntry 10 } eqptBoardContainerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes in which equipment holder the slot is contained. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 11 } eqptBoardContainerOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the position of the slot in the containing equipment holder. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 12 } -- The following attributes are used to represent the board inventory data. -- Board inventory data is retrieved for the following board-types: NT, EXT, -- managed LSM, ACU, CTRL, applique. -- Board inventory data is not retrieved for unmanaged ,externally managed -- (EXT_MANAGED) LSMs and ODM boardtypes. eqptBoardInventoryAlcatelCompanyId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the company of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 13 } eqptBoardInventoryTypeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the name of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 14 } eqptBoardInventoryPBACode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the Alcatel Printed Board Assembly code of of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 15 } eqptBoardInventoryFPBACode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the Alcatel Printed Board Assembly code of the board, which also identifies the boot software. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 16 } eqptBoardInventoryICScode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the Item Change Status iteration code of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 17 } eqptBoardInventoryCLEICode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the (USA) Common Language Equipment Identification code of the board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 18 } eqptBoardInventorySerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the serial number of the board. Breakdown of a sample serial number is : sample NANT-D serial number is AA1003ZA028 AA 10 03 ZA028 --- ==== ========== | | |=====' Production Plant Code | | | |==============' Week | |====================' Year ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 19 } eqptBoardInventoryLastFailedTest OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the last failing test by means of 4 numbers, from MSB to LSB: - Table number (1 byte) - Segment number (1 byte) - Case number (1 byte) - Check number (1 byte) As long as there has been no failing selftest, the value of this object will be 0. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptBoardEntry 20 } eqptSlotPlannedCapabilityProfile OBJECT-TYPE SYNTAX AsamProfilePointer ACCESS read-write STATUS mandatory DESCRIPTION "A pointer to the capability profile that will be used for this slot. Capability profiles are only applicable for LT cards that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTIO cards. Planning the profile should always be done at the same moment the LT/NTIO is planned. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 22 } eqptBoardCustAlarmProfile OBJECT-TYPE SYNTAX AsamProfilePointer ACCESS read-write STATUS mandatory DESCRIPTION "A pointer to the customizable alarms profile which will be associated to NT for all shelves except FD-REM where the customizable alarms profile will be associated to master LT. In redundant NT shelves the profile will be associated to both NTA and NTB while associating customizable alarms profile to NTA or NTB. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 23 } eqptBoardLastRestartCause OBJECT-TYPE SYNTAX INTEGER { poweron(1), unknown(2), watchdog(3), coldreset(4), warmreset(5), hotreset(6), hotreload(7), cleandata(8), emergencybuild(9), poweronreset(10), commitfailure(11), timezonemodified(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the last restart cause for board. Currently only LSM board can support. Considering future safe, only use default value for other board entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: unknown UNITS: -" ::= { eqptBoardEntry 24 } eqptBoardLastRestartTime OBJECT-TYPE SYNTAX NetworkTimeInSeconds ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the last restart time. Currently only LSM board can support. Considering future safe, only use default value for other board entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 25 } eqptBoardRestartNumberOfChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter which indicates the number of restart times. This counter is incremented each time eqptBoardLastRestartTime changes. Considering future safe, only use default value for other board entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 26 } eqptBoardRelatedMgntEntityIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Network address. It is a public OAM IP address related to xVPS. For single OAM IP is introduced, multi-xVPS boards existing on a same shelf may use one single OAM IP. This IP is configured on NT which manages these xVPS boards. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 27 } eqptBoardRelatedMgntEntityPairedNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " For single OAM IP is introduced, one public OAM IP can not identify an xVPS, so community string is introduced. Each active xVPS will have different community string in one shelf. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 28 } eqptBoardDualHostIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Network address. Only applicable for FD REM connected to dual host. It is the public OAM IP address of the host connecting the Lsm in this externally managed slot. It is instantiated with default value and can only be set when the planned type is EXT_MANAGED. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 29 } eqptBoardDualHostLsmLocation OBJECT-TYPE SYNTAX EqptHolderIndexOrZero ACCESS read-write STATUS mandatory DESCRIPTION " Only applicable for FD REM connected to dual host. It is the Rack/Shelf identifying the location of this externally managed slot, within the scope of the host connecting the Lsm. The slot component is implicitly present in the key. It is instantiated with default value and can only be set when the planned type is EXT_MANAGED. The type corresponds to the type EqptHolderIndex, except for the fact that this field can be 0, which is the default value. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { eqptBoardEntry 30 } eqptBoardIfSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This object gives the slot's linear number, which could be used by an external manager to help in mapping a given IfIndex to a physical slot location. It is a numerical value that consists of 6 bits. For a slot that does not carry any interfaces (e.g. applique or NTIO slot), the value is always '0xFF'. Note that this linear slot number is persistent across system restarts, i.e. the same linear slot number will be used for the same slot even after a restart of the ISAM system. However, it is not guaranteed that the same linear slot number will used after a migration to a new release. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 0xFF UNITS: -" ::= { eqptBoardEntry 32 } eqptBoardRestartCountPerLt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter which indicates the number of restart times per LT. This counter is incremented each time eqptBoardLastRestartTime changes.This counter will reset to zero when LT replaced or unplanned. Note:This counter is Per LT basis. LTs are distinguished based on serialNumber. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: NA" ::= { eqptBoardEntry 33 } eqptBoardClearRestartCountPerLt OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object is a button-like object to reset the eqptBoardRestartCountPerLt counter. When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is cleared. A value set to false(2) or other is ignored.. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: FALSE UNITS: NA" ::= { eqptBoardEntry 34 } -- ================================================================== -- | STOP BOARD TABLE | -- ================================================================== -- ================================================================== -- | START SHELF SUMMARY TABLE | -- ================================================================== eqptShelfSummaryTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptShelfSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Shelf summary table, summarizing slot or board related status changes within each shelf. This table has one row per planned shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above." ::= { asamEquipmentMIB 4 } eqptShelfSummaryEntry OBJECT-TYPE SYNTAX EqptShelfSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the shelf summary table. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptHolderId } ::= { eqptShelfSummaryTable 1 } EqptShelfSummaryEntry ::= SEQUENCE { eqptShelfHwNumberOfChanges Counter, eqptShelfSlotSummaryOccupation OCTET STRING, eqptShelfBoardSummaryAdmin OCTET STRING, eqptShelfBoardSummaryAvail OCTET STRING, eqptShelfBoardSummaryOper OCTET STRING, eqptShelfBoardSummaryTypeMismatch OCTET STRING, eqptShelfBoardSummaryAlarm OCTET STRING } eqptShelfHwNumberOfChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter which indicates the number of configuration or status changes for slots/boards within this shelf. This counter is incremented each time any of the summary table objects of this shelf changes. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptShelfSummaryEntry 1 } eqptShelfSlotSummaryOccupation OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Bitmap of the occupation of slots (0 = empty, 1 = full) Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptShelfSummaryEntry 2 } eqptShelfBoardSummaryAdmin OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Bitmap of the administrative state of the boards (0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptShelfSummaryEntry 3 } eqptShelfBoardSummaryAvail OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Bitmap of the availability state of the boards (0 = not available, 1 = available). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptShelfSummaryEntry 4 } eqptShelfBoardSummaryOper OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Bitmap of the operational state of the boards (0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptShelfSummaryEntry 5 } eqptShelfBoardSummaryTypeMismatch OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Bitmap of the mismatch between the actual board-type and the planned board-type (0 = mismatch, 1 = no mismatch). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptShelfSummaryEntry 6 } eqptShelfBoardSummaryAlarm OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Bitmap of the boards which generated an alarm (0 = alarm, 1 = no alarm). Applicable for NT, EXT, LSM, ACU, CTRL, applique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptShelfSummaryEntry 7 } -- ================================================================== -- | STOP SHELF SUMMARY TABLE | -- ================================================================== eqptProt OBJECT IDENTIFIER ::= { asamEquipmentMIB 5 } eqptProtNextProtGroupId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for eqptProtGroupId when creating entries in the eqptProtGroupTable. The value 0 indicates that no unassigned entries are available. After each retrieval, the agent will modify the value to the next unassigned index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= {eqptProt 1} -- ================================================================== -- | START PROTECTIONGROUP TABLE | -- ================================================================== eqptProtGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptProtGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table representing groups of protected or protecting elements. Only one row for NT protection group which will always be created and cannot be deleted. From ISAM R4.1.02 the default created NT protection group will be locked. (before it was unlocked). From R3.3 onwards, each LT protection group (comprised of 2 adjacent slots LT n and LT n+1, where n is a odd number), also has a row. The protection groups are created by default even though the protection groups are not used. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above " ::= { eqptProt 2 } eqptProtGroupEntry OBJECT-TYPE SYNTAX EqptProtGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the eqptProtGroupTable. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptProtGroupId } ::= { eqptProtGroupTable 1 } EqptProtGroupEntry ::= SEQUENCE { eqptProtGroupId INTEGER, eqptProtGroupType INTEGER, eqptProtGroupNumberOfChanges Counter, eqptProtGroupSwitchoverCount Counter, eqptProtGroupLastSwitchoverReason INTEGER, eqptProtGroupEpsQuenchfactor TimeTicks, eqptProtGroupAlarmBitmap INTEGER, eqptProtGroupAdminStatus INTEGER, eqptProtGroupAdminProtElement INTEGER, eqptProtGroupOperProtElement INTEGER, eqptProtGroupRowStatus RowStatus } eqptProtGroupId OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value to identify a protection group. The value 1 is reserved for the NT protection group, which is always present and cannot be deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptProtGroupEntry 1} eqptProtGroupType OBJECT-TYPE SYNTAX INTEGER { one-plus-one(1), one-for-N(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attributes distinguishes between 1+1 and 1:N protection groups. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: one-plus-one(1) UNITS: -" ::= { eqptProtGroupEntry 2 } eqptProtGroupNumberOfChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter which indicates the number of status changes in this protection group as well as the status changes for the protecting elements within this group: eqptProtGroupSwitchoverCount; eqptProtGroupLastSwitchoverReason; eqptProtGroupAlarmBitmap; eqptProtElementStandbyStatus. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptProtGroupEntry 3 } eqptProtGroupSwitchoverCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter for the number of switchovers being performed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { eqptProtGroupEntry 4 } eqptProtGroupLastSwitchoverReason OBJECT-TYPE SYNTAX INTEGER { noSwitchOver(1), -- no switch over has been performed yet forcedActive(2), -- chain is forced active boardNotPresent(3), -- board is removed or not reachable extenderChainFailure(4), -- extender chain failure linkFailure(5), -- link failure watchDogTimeOut(6), -- redundancy watchdog fileSystemCorrupt(7), -- curruption of file system configurationMismatch(8), -- mismatch in boardType or Swversion boardUnplanned(9), -- board has been unplanned boardLocked(10), -- board has been locked shelfDefense(11), -- shelf-error detected by defense revertiveSwitchOver(12), -- switchover because protected board is -- operational again (in case of 1:N) lanxFailure(13), -- lanx not alive lanxHwFailure(14), -- active Lanx has detected a -- hardware failure lanxSdkFailure(15), -- active Lanx has detected a -- SDK-failure dpoeAppFailure(16), -- active DPoE has detected application failure dpoeUnreachable(17) -- DPoE is not reachable } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the reason of the last switch over. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..17 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptProtGroupEntry 5 } eqptProtGroupEpsQuenchfactor OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "This object contains a timervalue in 1/100 sec. The EpsQuench timer is used to prevent continuous switch-overs in case of unstable EPS. Value equal to zero means the quenching mechanism is disabled. Configuration of the EPS quenchfactor has mainly be foreseen for test purposes. Operators should preferably not be able to reconfigure the default value. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: 1440000 UNITS: 0.01 seconds" DEFVAL { 1440000} -- 4 hours ::= { eqptProtGroupEntry 6 } eqptProtGroupAlarmBitmap OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Status bitmap: bit 0 set means No defect at all bit 1 : if bit set, Standby degradation alarm is set (excludes bit 0 setting) bit 2 .. 31 : reserved for future extensions. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0x00000001 UNITS: -" ::= { eqptProtGroupEntry 7 } eqptProtGroupAdminStatus OBJECT-TYPE SYNTAX INTEGER { unlock(1), lock(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used by the administrator to disable or enable protection within that protection group. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: unlock(1) UNITS: -" ::= { eqptProtGroupEntry 8 } eqptProtGroupAdminProtElement OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Only supported for 1:N protection groups. In case of a forced switchover to the spare element, this attribute is used to specify the element to be protected. The value 0 means that no element is specified. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptProtGroupEntry 9 } eqptProtGroupOperProtElement OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Only supported for 1:N protection groups. Indicates which element is currently protected by the spare element. The value 0 means that currently the spare element is not protecting any element. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptProtGroupEntry 10 } eqptProtGroupRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Entries in the eqptProtGroupTable can only be created at once, by specifying eqptProtGroupRowStatus=createAndGo(4). For NT protection group, if all values are valid then the entry is made active(1). For LT protection group, if the group is in service then the entry is made active(1). If the group is not in service then the entry is made notInService(2). If the object is set to destroy(6), the entry is deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above PERSIST: NO DEFVALUE: active(1) UNITS: -" ::= { eqptProtGroupEntry 11 } -- ================================================================== -- | STOP PROTECTIONGROUP TABLE | -- ================================================================== -- ================================================================== -- | START PROTECTIONELEMENT TABLE | -- ================================================================== eqptProtElementTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptProtElementEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table representing the protected or protecting elements. An element can be either a board or an extension chain. Both are identified by the corresponding slot identifier (extension chain is identified by slot of corresponding NT board). This table has only two rows from ISAM R2.2 to R3.2. From R3.3 onwards, this table has a row for each slots in the main shelf. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above " ::= { eqptProt 3 } eqptProtElementEntry OBJECT-TYPE SYNTAX EqptProtElementEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the eqptProtElementTable. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptSlotId } ::= { eqptProtElementTable 1 } EqptProtElementEntry ::= SEQUENCE { eqptProtElementGroupId INTEGER, eqptProtElementType INTEGER, eqptProtElementStandbyStatus INTEGER, eqptProtElementRedcyCtrlStatus INTEGER, eqptProtElementRowStatus RowStatus, eqptProtElementStandbyStatuschangeReason INTEGER } eqptProtElementGroupId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This attributes identifies the protection group to which this element belongs. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptProtElementEntry 1} eqptProtElementType OBJECT-TYPE SYNTAX INTEGER { normal(1), spare(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to distinguish between normal elements of a protection group and the spare element of a 1:N protection group. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: normal(1) UNITS: -" ::= { eqptProtElementEntry 2} eqptProtElementStandbyStatus OBJECT-TYPE SYNTAX INTEGER { providing-service(1), --active and providing service hot-standby(2), --standby and ready to become active cold-standby(3), --standby but not synchronized idle(4) --not able to protect peer board } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the standby status of the protection group element. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptProtElementEntry 3} eqptProtElementRedcyCtrlStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), forced-active(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to force a switchover between elements of a protection group or to keep one of the elements active. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: normal(1) UNITS: -" ::= { eqptProtElementEntry 4} eqptProtElementRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Entries in the eqptProtElementTable can only be created at once, by specifying eqptProtEelementRowStatus=createAndGo(4). If all values are valid then the entry is made active(1). If the object is set to destroy(6), the entry is deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: active(1) UNITS: -" ::= { eqptProtElementEntry 5} eqptProtElementStandbyStatuschangeReason OBJECT-TYPE SYNTAX INTEGER { none(0), -- standby state is hot standby -- or not applicable (default value) protectionGroupLocked(1), -- redundancy is not enabled forcedActive(2), -- active board is put to forced active peerLinkUnAvailable(3), -- standby NT link is not available peerLocked(4), -- standby board is locked peerNotPlanned(5), -- standby board is not planned peerNotPluggedIn(6), -- standby board is not plugged in databaseNotInSync(7), -- data base is not synchronized lanxDynamicDataNotSynced(8), -- lanx has not synchronized its data lanxSdkFailure(9), -- standby Lanx has detected a -- non recoverable SDK-failure lanxRecovSdkFailure(10), -- standby Lanx has deteced a -- recoverable SDK-failure lanxHwFailure(11), -- standby Lanx has deteced a hardware failure lanxDynDataSyncFailure(12), -- standby lanx could not -- synchronize its dynamic data lanxStaticSyncFailure(13), -- standby lanx could not -- synchronize its static data lanxPeerCommFailure(14), -- standby Lanx has lost communication -- with the active lanx lanxFailure(15), -- standby lanx not alive linkGroupNotAvailable(16), -- link group not available ltNotEnabled(17), -- for LT redundancy : LT not enabled lanxHiGigFailure(18), -- lanx (act or stb has detected a HiGiG -- failure lanxReconcileFailure(19), -- lanx has detected a failure in the -- reconcile phase (a.k.a. bulk sync phase) lanxDiscoveryFailure(20), -- act lanx is not able to detect the mate -- although the HiGig is up and running. dpoeAppFailure(21), -- standby DPoE has detected application -- failure dpoeCommFailure(22), -- standby DPoE has lost communication with -- active DPoE dpoeSyncFailure(23), -- standby DPoE could not do synchronization -- with active DPoE dpoeUnreachable(24) -- standby DPoE is not reachable } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the reason why the standby status of the protection group element has changed. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..24 PERSIST: NO DEFVALUE: none(0) UNITS: -" ::= { eqptProtElementEntry 6} -- ================================================================== -- | STOP PROTECTIONELEMENT TABLE | -- ================================================================== eqptProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 6 } -- ================================================================== -- | START PROFILE TABLE | -- ================================================================== eqptProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table holding the mapping between the profileId and the corresponding profile name. This table has a row for every profile in the system. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { eqptProfile 1 } eqptProfileEntry OBJECT-TYPE SYNTAX EqptProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the eqptProfileTable. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptProfileId } ::= { eqptProfileTable 1 } EqptProfileEntry ::= SEQUENCE { eqptProfileId AsamProfileIndex, eqptProfileName AsamProfileName, eqptProfileDescription DisplayString } eqptProfileId OBJECT-TYPE SYNTAX AsamProfileIndex ACCESS read-only STATUS mandatory DESCRIPTION "A value identifying a profile. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptProfileEntry 1 } eqptProfileName OBJECT-TYPE SYNTAX AsamProfileName ACCESS read-only STATUS mandatory DESCRIPTION "The corresponding name for a given profile id. The name corresponding to the ProfileId must also be unique. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptProfileEntry 2 } eqptProfileDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A short description for the given profile, explaining the key attributes. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptProfileEntry 3 } -- ================================================================== -- | STOP PROFILE TABLE | -- ================================================================== -- ================================================================== -- | START PROFILE APPLICABILITY TABLE | -- ================================================================== eqptProfileApplicabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptProfileApplicabilityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists for every defined profile in the system for which boards it is applicable. One profile can be applicable for multiple board types. Multiple profiles can be applicable for the same board type. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { eqptProfile 2 } eqptProfileApplicabilityEntry OBJECT-TYPE SYNTAX EqptProfileApplicabilityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the eqptProfileApplicabilityTable. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptProfileId, eqptBoardType } ::= { eqptProfileApplicabilityTable 1 } EqptProfileApplicabilityEntry ::= SEQUENCE { eqptBoardType DisplayString, eqptDefaultProfile TruthValue } eqptBoardType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string representing the board for which the profile is applicable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptProfileApplicabilityEntry 1 } eqptDefaultProfile OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A flag indicating if this is the default profile for a specific board type. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptProfileApplicabilityEntry 2 } -- ================================================================== -- | STOP PROFILE APPLICABILITY TABLE | -- ================================================================== eqptTestChainTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptTestChainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table contains the test chain configuration indicating which shelf is connected to the TAP_UP or whether an external test head is connected to the TAP_UP. This table has one row for each planned shelf. ALCATEL NOTE: TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 7 } eqptTestChainEntry OBJECT-TYPE SYNTAX EqptTestChainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the eqptTestChainTable." INDEX { eqptHolderId } ::= { eqptTestChainTable 1 } EqptTestChainEntry ::= SEQUENCE { eqptTestChainShelfToTapUp INTEGER, eqptTestChainExtTestHeadToTapUp INTEGER } eqptTestChainShelfToTapUp OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "A unique value to identify a shelf position which is connected to the TAP_UP. The value '0' (default value) indicates that it is not connected. This parameter is used if eqptTestChainExtTestHeadToTapUp is set to '1' (i.e., 'no') and is ignored if eqptTestChainExtTestHeadToTapUp is set to '2' (i.e., 'yes'). ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: DEP / 0 plus the range of eqptHolderId of the shelves. DEFVALUE: 0 / this means that no shelf is configured to be connected to the TAP_UP. UNITS: NA SPARSE: NO DESCR: NA " ::= { eqptTestChainEntry 1 } eqptTestChainExtTestHeadToTapUp OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used to indicate whether an external test head is connected to the TAP_UP. no (1): no external test head is connected to the TAP_UP. yes (2): an external test head is connected to the TAP_UP. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1 UNITS: NA SPARSE: NO DESCR: NA " ::= { eqptTestChainEntry 2 } eqptCustAlarmProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 8 } -- ================================================================== -- | START CUSTOMIZABLE ALARMS PROFILE TABLE | -- ================================================================== eqptCustAlarmProfileIndexNext OBJECT-TYPE SYNTAX AsamNextProfileIndex ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for eqptCustAlarmProfileIndex when creating entries in the associated profile table. The value 0 indicates that no unassigned entries are available. To obtain the profile index value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index." ::= { eqptCustAlarmProfile 1 } eqptCustAlarmProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptCustAlarmProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table representing the configurable attributes of the customizable alarms : a description, and the corresponding Alarm Outputs to be activated when this alarm occurs. This table has a row for each external alarms profile. It offers data for a maximum of 5 external alarms. Alarms that are not defined for a particular profile, need to contain default values in the fields corresponding to that alarm number. Independent of the alarm number, the name of the profile is also present, as well as the row status. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { eqptCustAlarmProfile 2} eqptCustAlarmProfileEntry OBJECT-TYPE SYNTAX EqptCustAlarmProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the eqptCustAlarmProfileTable. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptCustAlarmProfileIndex } ::= { eqptCustAlarmProfileTable 1 } EqptCustAlarmProfileEntry ::= SEQUENCE { eqptCustAlarmProfileIndex AsamProfileIndex, eqptCustAlarmProfileName AsamProfileName, eqptCustAlarmProfileUsedStatus AsamProfileRefCount, eqptCustAlarmProfileRowStatus RowStatus, eqptCustAlarmProfileMnemonic1 DisplayString, eqptCustAlarmProfileDescription1 DisplayString, eqptCustAlarmProfileVisibleOutput1 EqptCustAlarmProfileOutputType, eqptCustAlarmProfileAudibleOutput1 EqptCustAlarmProfileOutputType, eqptCustAlarmProfilePolarity1 EqptCustAlarmProfilePolarityType, eqptCustAlarmProfileSeverity1 AsamAlarmSeverityType, eqptCustAlarmProfileMnemonic2 DisplayString, eqptCustAlarmProfileDescription2 DisplayString, eqptCustAlarmProfileVisibleOutput2 EqptCustAlarmProfileOutputType, eqptCustAlarmProfileAudibleOutput2 EqptCustAlarmProfileOutputType, eqptCustAlarmProfilePolarity2 EqptCustAlarmProfilePolarityType, eqptCustAlarmProfileSeverity2 AsamAlarmSeverityType, eqptCustAlarmProfileMnemonic3 DisplayString, eqptCustAlarmProfileDescription3 DisplayString, eqptCustAlarmProfileVisibleOutput3 EqptCustAlarmProfileOutputType, eqptCustAlarmProfileAudibleOutput3 EqptCustAlarmProfileOutputType, eqptCustAlarmProfilePolarity3 EqptCustAlarmProfilePolarityType, eqptCustAlarmProfileSeverity3 AsamAlarmSeverityType, eqptCustAlarmProfileMnemonic4 DisplayString, eqptCustAlarmProfileDescription4 DisplayString, eqptCustAlarmProfileVisibleOutput4 EqptCustAlarmProfileOutputType, eqptCustAlarmProfileAudibleOutput4 EqptCustAlarmProfileOutputType, eqptCustAlarmProfilePolarity4 EqptCustAlarmProfilePolarityType, eqptCustAlarmProfileSeverity4 AsamAlarmSeverityType, eqptCustAlarmProfileMnemonic5 DisplayString, eqptCustAlarmProfileDescription5 DisplayString, eqptCustAlarmProfileVisibleOutput5 EqptCustAlarmProfileOutputType, eqptCustAlarmProfileAudibleOutput5 EqptCustAlarmProfileOutputType, eqptCustAlarmProfilePolarity5 EqptCustAlarmProfilePolarityType, eqptCustAlarmProfileSeverity5 AsamAlarmSeverityType } eqptCustAlarmProfileIndex OBJECT-TYPE SYNTAX AsamProfileIndex ACCESS read-only STATUS mandatory DESCRIPTION "The Customizale Alarms Profile Index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptCustAlarmProfileEntry 1 } eqptCustAlarmProfileName OBJECT-TYPE SYNTAX AsamProfileName ACCESS read-write STATUS mandatory DESCRIPTION "A textual name uniquely identifying this profile. Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptCustAlarmProfileEntry 2 } eqptCustAlarmProfileUsedStatus OBJECT-TYPE SYNTAX AsamProfileRefCount ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of entities using this profile. If the reference count is greater than 0, then this profile is 'in use', and may NOT be deleted. If the value is 0, then this profile is 'not in use', and can be deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptCustAlarmProfileEntry 3 } eqptCustAlarmProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Entries in the eqptCustAlarmProfileTable can only be created at once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4). If all values are valid then the entry is made active(1). If the object is set to destroy(6), the entry is deleted. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: active(1) UNITS: -" ::= { eqptCustAlarmProfileEntry 4 } eqptCustAlarmProfileMnemonic1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 1. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -" ::= { eqptCustAlarmProfileEntry 5 } eqptCustAlarmProfileDescription1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "The description of the customizable alarm, for given Profile Index, for external alarm number 1. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -" ::= { eqptCustAlarmProfileEntry 6 } eqptCustAlarmProfileVisibleOutput1 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 7 } eqptCustAlarmProfileAudibleOutput1 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 8 } eqptCustAlarmProfilePolarity1 OBJECT-TYPE SYNTAX EqptCustAlarmProfilePolarityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 9 } eqptCustAlarmProfileSeverity1 OBJECT-TYPE SYNTAX AsamAlarmSeverityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows the severity of the alarm, for given Profile Index, for external alarm number 1. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -" ::= { eqptCustAlarmProfileEntry 10 } eqptCustAlarmProfileMnemonic2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 2. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -" ::= { eqptCustAlarmProfileEntry 11 } eqptCustAlarmProfileDescription2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "The description of the customizable alarm, for given Profile Index, for external alarm number 2. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -" ::= { eqptCustAlarmProfileEntry 12 } eqptCustAlarmProfileVisibleOutput2 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 13 } eqptCustAlarmProfileAudibleOutput2 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 14 } eqptCustAlarmProfilePolarity2 OBJECT-TYPE SYNTAX EqptCustAlarmProfilePolarityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2), UNITS: -" ::= { eqptCustAlarmProfileEntry 15 } eqptCustAlarmProfileSeverity2 OBJECT-TYPE SYNTAX AsamAlarmSeverityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows the severity of the alarm, for given Profile Index, for external alarm number 2. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -" ::= { eqptCustAlarmProfileEntry 16 } eqptCustAlarmProfileMnemonic3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 3. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -" ::= { eqptCustAlarmProfileEntry 17 } eqptCustAlarmProfileDescription3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "The description of the customizable alarm, for given Profile Index, for external alarm number 3. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -" ::= { eqptCustAlarmProfileEntry 18 } eqptCustAlarmProfileVisibleOutput3 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 19 } eqptCustAlarmProfileAudibleOutput3 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 20 } eqptCustAlarmProfilePolarity3 OBJECT-TYPE SYNTAX EqptCustAlarmProfilePolarityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 21 } eqptCustAlarmProfileSeverity3 OBJECT-TYPE SYNTAX AsamAlarmSeverityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows the severity of the alarm, for given Profile Index, for external alarm number 3. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -" ::= { eqptCustAlarmProfileEntry 22 } eqptCustAlarmProfileMnemonic4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 4. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -" ::= { eqptCustAlarmProfileEntry 23 } eqptCustAlarmProfileDescription4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "The description of the customizable alarm, for given Profile Index, for external alarm number 4. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -" ::= { eqptCustAlarmProfileEntry 24 } eqptCustAlarmProfileVisibleOutput4 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 25 } eqptCustAlarmProfileAudibleOutput4 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 26 } eqptCustAlarmProfilePolarity4 OBJECT-TYPE SYNTAX EqptCustAlarmProfilePolarityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 27 } eqptCustAlarmProfileSeverity4 OBJECT-TYPE SYNTAX AsamAlarmSeverityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows the severity of the alarm, for given Profile Index, for external alarm number 4. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -" ::= { eqptCustAlarmProfileEntry 28 } eqptCustAlarmProfileMnemonic5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The mnemonic of the customizable alarm, for given Profile Index, for external alarm number 5. Maximum length is 16, allowed characters A-Z. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -" ::= { eqptCustAlarmProfileEntry 29 } eqptCustAlarmProfileDescription5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "The description of the customizable alarm, for given Profile Index, for external alarm number 5. Maximum length is 40. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 'Undefined' UNITS: -" ::= { eqptCustAlarmProfileEntry 30 } eqptCustAlarmProfileVisibleOutput5 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the visible alarm output, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 31 } eqptCustAlarmProfileAudibleOutput5 OBJECT-TYPE SYNTAX EqptCustAlarmProfileOutputType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether or not to trigger the audible alarm output, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 32 } eqptCustAlarmProfilePolarity5 OBJECT-TYPE SYNTAX EqptCustAlarmProfilePolarityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows whether the alarm polarity is normal or inversed, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: normal(2) UNITS: -" ::= { eqptCustAlarmProfileEntry 33 } eqptCustAlarmProfileSeverity5 OBJECT-TYPE SYNTAX AsamAlarmSeverityType ACCESS read-write STATUS mandatory DESCRIPTION "Shows the severity of the alarm, for given Profile Index, for external alarm number 5. ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: 1-5 PERSIST: YES DEFVALUE: major(4) UNITS: -" ::= { eqptCustAlarmProfileEntry 34 } -- ================================================================== -- | STOP CUSTOMIZABLE ALARMS PROFILE TABLE | -- ================================================================== -- ================================================================== -- | START CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE | -- ================================================================== eqptCustAlarmProfileMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptCustAlarmProfileMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table listing the profile name to profile Index Mapping." ::= { eqptCustAlarmProfile 3} eqptCustAlarmProfileMappingEntry OBJECT-TYPE SYNTAX EqptCustAlarmProfileMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) representing the Customizable Alarm Profile Name to Index mapping. The system automatically creates an entry in this table for each corresponding entry (custAlarm-profile) created in the eqptCustAlarmProfileTable. Similarly, when a profile is deleted, the corresponding entry in this table is also automatically deleted by the system." INDEX {eqptCustAlarmProfileMappingName } ::= {eqptCustAlarmProfileMappingTable 1} EqptCustAlarmProfileMappingEntry ::= SEQUENCE { eqptCustAlarmProfileMappingName AsamProfileName, eqptCustAlarmProfileMappingIndex AsamProfileIndex } eqptCustAlarmProfileMappingName OBJECT-TYPE SYNTAX AsamProfileName ACCESS not-accessible STATUS mandatory DESCRIPTION "A textual name uniquely identifying this profile. This name has to be unique within the assigned scope. Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptCustAlarmProfileMappingEntry 1 } eqptCustAlarmProfileMappingIndex OBJECT-TYPE SYNTAX AsamProfileIndex ACCESS read-only STATUS mandatory DESCRIPTION "The Customizale Alarms Profile Index. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { eqptCustAlarmProfileMappingEntry 2 } -- ================================================================== -- | STOP CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE | -- ================================================================== -- ================================================================== -- | START MTA FIELD | -- ================================================================== eqptMtaTest OBJECT IDENTIFIER ::= { asamEquipmentMIB 9 } eqptMtaTestHeadType OBJECT-TYPE SYNTAX INTEGER { four-wire(1), two-wire(2) } ACCESS read-write STATUS mandatory DESCRIPTION "setting the MTA test head type, four-wire mode or two-wire mode. This object should be consistent with external test head equipment, MTA subsystem will operate different relays based on this object. MTA commands will have differentiation between these two mode. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1 UNITS: NA SPARSE: NO DESCR: NA" ::= { eqptMtaTest 1 } -- ================================================================== -- | STOP MTA FIELD | -- ================================================================== -- ================================================================== -- | START BOARD THERMAL SENSOR TABLE | -- ================================================================== eqptBoardThermalSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptBoardThermalSensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table representing the actual value and thresholds of Thermal Sensor(s) on boards. One entry corresponds to each sensor on board. The entries are presented only when the board is plugged in, operationally up, has thermal sensors on it, and when operator put a read request for it. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 10 } eqptBoardThermalSensorEntry OBJECT-TYPE SYNTAX EqptBoardThermalSensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the equipment thermal sensor table on boards ALCATEL NOTE: SUPPORT: YES" INDEX {eqptSlotId, eqptBoardThermalSensorId} ::= {eqptBoardThermalSensorTable 1} EqptBoardThermalSensorEntry ::= SEQUENCE{ eqptBoardThermalSensorId INTEGER, eqptBoardThermalSensorActualTemperature INTEGER, eqptBoardThermalSensorTcaThresholdLow INTEGER, eqptBoardThermalSensorTcaThresholdHigh INTEGER, eqptBoardThermalSensorShutdownThresholdLow INTEGER, eqptBoardThermalSensorShutdownThresholdHigh INTEGER } eqptBoardThermalSensorId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of thermal sensors on board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..15 PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptBoardThermalSensorEntry 1} eqptBoardThermalSensorActualTemperature OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Actual Temperature value read from thermal sensor on board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: -40..150 PERSIST: NO DEFVALUE: NA UNITS: degree Celsius" ::={ eqptBoardThermalSensorEntry 2} eqptBoardThermalSensorTcaThresholdLow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Low Tca threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius" ::= { eqptBoardThermalSensorEntry 3} eqptBoardThermalSensorTcaThresholdHigh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "High Tca threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius" ::={ eqptBoardThermalSensorEntry 4} eqptBoardThermalSensorShutdownThresholdLow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Low Shutdown threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius" ::={ eqptBoardThermalSensorEntry 5} eqptBoardThermalSensorShutdownThresholdHigh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "High Shutdown threshold of thermal sensor on Board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: degree Celsius" ::={ eqptBoardThermalSensorEntry 6} -- ================================================================== -- | STOP BOARD THERMAL SENSOR TABLE | -- ================================================================== -- ================================================================== -- | START PORTMAPPING TABLE | -- ================================================================== eqptPortMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptPortMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Equipment PortMapping table, showing the mapping between logical ports and physical ports (faceplate numbering). This table contains one row per logical port on the xHUB. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 13 } eqptPortMappingEntry OBJECT-TYPE SYNTAX EqptPortMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the equipment PortMapping table. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptPortMappingLogPortNbr } ::= { eqptPortMappingTable 1 } EqptPortMappingEntry ::= SEQUENCE { eqptPortMappingLogPortNbr EqptPortMappingIndex, eqptPortMappingLogPortType INTEGER, eqptPortMappingPhyPortSlot EqptSlotIndex, eqptPortMappingPhyPortType INTEGER, eqptPortMappingPhyPortNbr INTEGER, eqptPortMappingLSMSlot EqptSlotIndex, eqptPortMappingChanges Counter } eqptPortMappingLogPortNbr OBJECT-TYPE SYNTAX EqptPortMappingIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "Index in equipment PortMapping Table: corresponds to the logical port id on the xHUB. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptPortMappingEntry 1 } eqptPortMappingLogPortType OBJECT-TYPE SYNTAX INTEGER { uplink (1), -- downlink (2), -- hostlink (3), -- internal (4) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The logical port type corresponds to the link classification. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptPortMappingEntry 2 } eqptPortMappingPhyPortSlot OBJECT-TYPE SYNTAX EqptSlotIndex ACCESS read-only STATUS mandatory DESCRIPTION "The equipment slot index of the physical port. This slot will point to either a NT or NTIO slot position. This field is not applicable for hostlinks or internal, in which case it gets the value 0xFFFF ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptPortMappingEntry 3 } eqptPortMappingPhyPortType OBJECT-TYPE SYNTAX INTEGER { not-applicable(1), sfp(2), xfp(3), vp(5), eth(10), mcast(11), ai(12), ieee(13), cfp(14) } ACCESS read-only STATUS mandatory DESCRIPTION "The physcial port type. This field is not applicable for hostlinks. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14 PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptPortMappingEntry 4 } eqptPortMappingPhyPortNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The pysical port number, which corresponds to the faceplate number of the sfp/xfp port. This field is not applicable for hostlinks or internal, in which case it gets the value 0xFF. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptPortMappingEntry 5 } eqptPortMappingLSMSlot OBJECT-TYPE SYNTAX EqptSlotIndex ACCESS read-only STATUS mandatory DESCRIPTION "The equipment slot index of the corresponding LSM slot. This field is only applicable for hostlinks, and downlinks to which a remote LSM slot is assigned. In other cases it gets the value 0xFFFF. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptPortMappingEntry 6 } eqptPortMappingChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { eqptPortMappingEntry 7} eqptPortMappingGlobalChangeCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter represents the number of global PortMapping configuration changes. It is a wraparound counter between 0 and MAX. SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX PERSIST: NO DEFVALUE: 0 UNITS: -" ::= { asamEquipmentMIB 14 } -- ================================================================== -- | STOP PORTMAPPING TABLE | -- ================================================================== -- ================================================================== -- | START ANY-TO-ANY PORTPROTECTION TABLE | -- ================================================================== eqptPortProtectionTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptPortProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table holds the port protection groups" ::= { asamEquipmentMIB 15 } eqptPortProtectionEntry OBJECT-TYPE SYNTAX EqptPortProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry represents a protection group which consists of two ports. These two ports can be on the same LT board, or on different LT's." INDEX { eqptPortProtectionPortId } ::= { eqptPortProtectionTable 1 } EqptPortProtectionEntry ::= SEQUENCE { eqptPortProtectionPortId InterfaceIndex, eqptPortProtectionRowStatus RowStatus, eqptPortProtectionPairedPortId InterfaceIndex, eqptPortProtectionPortStatus INTEGER, eqptPortProtectionPairedPortStatus INTEGER, eqptPortProtectionSwitchCommand InterfaceIndex, eqptPortProtectionLastSwitchReason INTEGER, eqptPortProtectionNumberOfSwitchovers INTEGER } eqptPortProtectionPortId OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Each row is indexed by the IfIndex of the primary port of the protection group, the one which is protected. Only PON ports can be selected." ::= { eqptPortProtectionEntry 1 } eqptPortProtectionRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "All rows instantiated using 'create-and-go' to mate 2 ports in a protection group. Set to 'destroy' to eliminate the protection group. RULE 1 - Cannot create a protection group on an LT card that doesn't support any-to-any redundancy. RULE 2 - Cannot mate two ports in a protection group if the paired port has already one or more interface(s) defined on top of the physical link interface. RULE 3 - Cannot delete a protection group if paired port is Admin UP." ::= { eqptPortProtectionEntry 2 } eqptPortProtectionPairedPortId OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION " This attribute represents the IfIndex of the paired port. Only PON ports can be selected. Must satisfy the following VALIDATIONs (otherwise OLT should reject): 1) IfIndex must represent a real port. 2) PON cannot have any provisioned (planned) ONTs. 3) Cannot mate a PON with itself. 4) Cannot mate with a PON that is already mated in a protection scheme." ::= { eqptPortProtectionEntry 3 } eqptPortProtectionPortStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This attribute represents the status of the primary port. Following DEFINITIONS apply: Active - means the port is used for transmission. Inactive - means the system is NOT using the port for transmission. Up - means the port is capable of being used for transmission/reception. Down - means the port is NOT capable of being used for transmission/reception (this includes a port that is ADMIN down as well as a port that is down due to an operational fault). Enumerations are as follows: 1 = Active Up 2 = Active Down 3 = Inactive Up 4 = Inactive Down" ::= { eqptPortProtectionEntry 4 } eqptPortProtectionPairedPortStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This attribute represents the status of the paired port. Following DEFINITIONS apply: Active - means the port is used for transmission. Inactive - means the system is NOT using the port for transmission. Up - means the port is capable of being used for transmission/reception. Down - means the port is NOT capable of being used for transmission/reception (this includes a port that is ADMIN down as well as a port that is down due to an operational fault). Enumerations are as follows: 1 = Active Up 2 = Active Down 3 = Inactive Up 4 = Inactive Down" ::= { eqptPortProtectionEntry 5 } eqptPortProtectionSwitchCommand OBJECT-TYPE SYNTAX InterfaceIndex ACCESS write-only STATUS mandatory DESCRIPTION " This attribute represents the IfIndex of the desired port to switch over to. Must satisfy the following VALIDATIONs (otherwise OLT should reject): 1) IfIndex must represent a real port. 2) IfIndex must be part of a protection group. 3) IfIndex must be either the primary or the paired port of the protection group on which the switchover is triggered." ::= { eqptPortProtectionEntry 6 } eqptPortProtectionLastSwitchReason OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This attribute contains the reason for the last port switchover (if any). 0 = No switch has occurred (since last LT startup). 1 = Manual switch due to port Admin State change. 2 = Manual switch due to usage of Switch command. 3 = Automatic switch due to system determination. 4 = Automatic switch due to LT failure." ::= { eqptPortProtectionEntry 7 } eqptPortProtectionNumberOfSwitchovers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This attribute contains the number of switchovers since last LT startup." ::= { eqptPortProtectionEntry 8 } -- ================================================================== -- | STOP ANY-TO-ANY PORTPROTECTION TABLE | -- ================================================================== -- ================================================================== -- | START ANY-TO-ANY PORTPROTECTION LOOKUP TABLE | -- ================================================================== eqptPortProtectionLookupTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptPortProtectionLookupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table holds the lookup port protection groups" ::= { asamEquipmentMIB 16 } eqptPortProtectionLookupEntry OBJECT-TYPE SYNTAX EqptPortProtectionLookupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry represents a lookup protection group which consists of two ports. The key is either a primary or a paired port in the eqptPortProtectionTable." INDEX { eqptPortProtectionLookupPortId } ::= { eqptPortProtectionLookupTable 1 } EqptPortProtectionLookupEntry ::= SEQUENCE { eqptPortProtectionLookupPortId InterfaceIndex, eqptPortProtectionLookupPrimaryPortId InterfaceIndex } eqptPortProtectionLookupPortId OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Each row is indexed by the IfIndex of a port in a protection group, either a primary or a paired port. Only PON ports can be selected." ::= { eqptPortProtectionLookupEntry 1 } eqptPortProtectionLookupPrimaryPortId OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION " This attribute represents the IfIndex of the primary port of the protection group to which the key port belongs. Only PON ports can be selected." ::= { eqptPortProtectionLookupEntry 2 } -- ================================================================== -- | STOP ANY-TO-ANY PORTPROTECTION LOOKUP TABLE | -- ================================================================== -- ================================================================== -- | START PLANNED RESOURCE TABLE | -- ================================================================== eqptBoardPlannedResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptBoardPlannedResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table representing the actual values of configured hardware resources on boards. This table only displays entries for resources on the boards that support this view. These are boards for which the relation between HW resource consumption and system configuration is not trivial. If the board is not supporting this view, then no entries will be displayed. The board does not physically need to be present for displaying the resources. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 17 } eqptBoardPlannedResourceEntry OBJECT-TYPE SYNTAX EqptBoardPlannedResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the equipment planned resource table ALCATEL NOTE: SUPPORT: YES" INDEX {eqptSlotId, eqptBoardPlannedResourceId} ::= {eqptBoardPlannedResourceTable 1} EqptBoardPlannedResourceEntry ::= SEQUENCE{ eqptBoardPlannedResourceId INTEGER, eqptBoardPlannedResourceCurrentValue INTEGER, eqptBoardPlannedResourceMaxValue INTEGER, eqptBoardPlannedResourceDescription DisplayString } eqptBoardPlannedResourceId OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Index of the planned resource for a board ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptBoardPlannedResourceEntry 1} eqptBoardPlannedResourceCurrentValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The actual planned value for the resource ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - " ::={ eqptBoardPlannedResourceEntry 2} eqptBoardPlannedResourceMaxValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value that the board supports for this resource. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - " ::={ eqptBoardPlannedResourceEntry 3} eqptBoardPlannedResourceDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string describing the planned resource for this board. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: - " ::={ eqptBoardPlannedResourceEntry 4} -- ================================================================== -- | STOP PLANNED RESOURCE TABLE | -- ================================================================== -- ================================================================== -- | START POWER MANAGEMENT TABLE | -- ================================================================== eqptPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptPowerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Equipment power table, representing the power management objects per system, rack or shelf. This table contains one row for the system, rack or shelf that is subject to power management. In other cases no entry is instantiated. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 18 } eqptPowerEntry OBJECT-TYPE SYNTAX EqptPowerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the equipment power table. An entry will be instantiated for a system/rack or shelf with active power management functionality. At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned RANI-B/RPNI-B comply to this requirement. ALCATEL NOTE: SUPPORT: YES " INDEX { eqptPowerId } ::= { eqptPowerTable 1 } EqptPowerEntry ::= SEQUENCE { eqptPowerId EqptHolderIndex, eqptPowerAdminMode INTEGER, eqptPowerOperMode INTEGER, eqptPowerBatType INTEGER, eqptPowerBatStartCapacity INTEGER, eqptPowerBatPlannedLifetime INTEGER, eqptPowerBatState INTEGER, eqptPowerBatFailure INTEGER, eqptPowerBatTemperature INTEGER, eqptPowerBatActualCapacity INTEGER, eqptPowerBatDefenseMode INTEGER, eqptPowerBatDefenseThreshold INTEGER, eqptPowerACState INTEGER, eqptPowerACFailure INTEGER, eqptPowerNDCaState INTEGER, eqptPowerNDCaFailure INTEGER, eqptPowerNDCbState INTEGER, eqptPowerNDCbFailure INTEGER, eqptPowerLDCaState INTEGER, eqptPowerLDCaFailure INTEGER, eqptPowerLDCbState INTEGER, eqptPowerLDCbFailure INTEGER, eqptPowerInVoltage INTEGER, eqptPowerInCurrent INTEGER, eqptPowerInConsumedPower INTEGER } eqptPowerId OBJECT-TYPE SYNTAX EqptHolderIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "Index in equipment Power Table. Index gives the shelf identification. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptPowerEntry 1 } eqptPowerAdminMode OBJECT-TYPE SYNTAX INTEGER { no-powermgnt (0), ac (1), ac-and-dc-local (2), dc-network (3), dc-network-and-dc-local (4), dc-local (5) } ACCESS read-write STATUS mandatory DESCRIPTION "The eqptPowerAdminMode shows the configured power mode. This configured mode will be used to mask any failures detected for non-supported modes. Enumeration is as follows: 0 = no powermanagement mode configured 1 = AC -> failures on DC local and DC network suppressed 2 = AC + DC local -> failures on DC network suppressed 3 = DC network -> failures on AC or DC local suppressed 4 = DC network + DC local -> failures on AC suppressed 5 = DC local -> failures on DC network or AC suppressed Configuration of the eqptPowerAdminMode is not mandatory and will not impact the behavior of the power module. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 2} eqptPowerOperMode OBJECT-TYPE SYNTAX INTEGER { no-powermgnt (0), ac (1), ac-and-dc-local (2), dc-network (3), dc-network-and-dc-local (4), dc-local (5), battery-fallback (6) } ACCESS read-only STATUS mandatory DESCRIPTION "The eqptPowerOperMode shows the power mode the NE is using at the moment of reading. The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO (e.g. RANI-B or RPNI-B) will provide valid information for this object. Other systems without Power mode support get no-powermgnt (0). Enumeration is as follows: 0 = system without an active power management 1 = AC 2 = AC + DC local 3 = DC network 4 = DC network + DC local 5 = DC local 6 = Battery fallback, i.e. only battery provides power to the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 3} eqptPowerBatType OBJECT-TYPE SYNTAX INTEGER { not-configured (0), agm-vrla-PbCa-battery (1), agm-vrla-Pure-Pb-battery (2), flooded-battery (3), gel-battery (4) } ACCESS read-write STATUS mandatory DESCRIPTION " This object is used to configure the battery type. This configuration only possible for planned powermanagement devices, in this case a planned RANI-B or RPNI-B. Only values for supported battery types are possible (e.g. in R51 only AGM/VRLA Lead Calcium BATTERY (1) is supported for the RANI-B/RPNI-B) The configured value is used to configure the power management driver. The link between the configurable value and the battery type is: 0 = no battery configured 1 = AGM/VRLA Lead Calcium BATTERY 2 = AGM/VRLA Pure Lead BATTERY 3 = FLOODED BATTERY 4 = GEL BATTERY ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 4} eqptPowerBatStartCapacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The capacity (Ah) of the battery at the moment of installation. The value of the capacity is in 1/100 Ah. Instatiated when eqptPowerBatType is configured. The configuration of this object is mandatory together with the configuration of the eqptPowerBatType ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1000 .. 10000 PERSIST: YES DEFVALUE: 1000 UNITS: 1/10O Ah " ::= { eqptPowerEntry 5} eqptPowerBatPlannedLifetime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Planned lifetime of the installed battery in 1/10 year. The planned lifetime, together with the start capacity, is used to calculate the actual maximal capacity of the battery. Instatiated when eqptPowerBatType is configured. The configuration of this object is mandatory together with the configuration of the eqptPowerBatType ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 150 PERSIST: YES DEFVALUE: 0 UNITS: 1/10 Year " ::= { eqptPowerEntry 6} eqptPowerBatState OBJECT-TYPE SYNTAX INTEGER { not-configured (0), no-data (1), charging (2), charged (3), discharging (4) } ACCESS read-only STATUS mandatory DESCRIPTION " The battery state will provide a view on the state of the battery. Possible states are: charging, charged and discharging. This operational state has meaning for devices that have a configured eqptPowerBatType. Other devices get a not-configured (0) value returned. Enumeration is as follows: 1 = no data available, e.g. battery configured, but not connected 2 = charging 3 = charged 4 = discharging ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 7} eqptPowerBatFailure OBJECT-TYPE SYNTAX INTEGER { not-applicable (0), voltage-good (1), voltage-out-of-range (2), over-voltage (3), over-temperature (4), battery-depleted (5) } ACCESS read-only STATUS mandatory DESCRIPTION " The battery failure state will provide an view on the failure state of the battery. This failure state has meaning for devices that have a configured eqptPowerBatType and eqptPowerBatState different from default or no-data. Other devices get a not-applicable (0) value returned. Specific ranges for the failure cases strongly depend on the battery type used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not applicable 1 = voltage good 2 = voltage out of range 3 = over-voltage 4 = over-temperature alarm on local temperature sensor 5 = battery depleted ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 8} eqptPowerBatTemperature OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Measured temperature of the battery in 1/10 Celcius The value is only readable when the battery type (eqptPowerBatType) is configured and the battery is installed and reachable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: -1000 .. 1000 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Celcius " ::= { eqptPowerEntry 9} eqptPowerBatActualCapacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The capacity (in % of a fully charged battery) of the battery. The value is only readable when the battery type (eqptPowerBatType) is configured and the battery is installed and reachable. Default value of 0% is returned when the battery is not reachable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 - 100 PERSIST: NO DEFVALUE: 0 UNITS: % " ::= { eqptPowerEntry 10} eqptPowerBatDefenseMode OBJECT-TYPE SYNTAX INTEGER { no-defense (0), voice-priority (1) } ACCESS read-write STATUS mandatory DESCRIPTION " The battery defense modes offers the operator the possibility to select the preferred power defense mode in case the system falls back to the battery mode. The power defense mode is a way to optimize the power consumption. In R5001 two options are possible. In later releases additional defense modes will be introduced. - no battery defense. In this mode the system will run normally, offering regular service until the battery runs out and the regular hw defenses are started (Dying Gasp) - voice priority. In this mode when the system falls back to the battery the regular service will be maintained until the battery drains until 90% and will then give priority to the voice LT's by powering down the DSL LT's. Voice service will be maintained until the battery runs out and the regular hw defenses are started (Dying Gasp). This configuration only possible for planned powermanagement devices, in this case a planned RANI-B or RPNI-B. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 11} eqptPowerBatDefenseThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The threshold gives an indication of the remaining capacity of the battery at the moment the defense defined in eqptPowerBatDefenseMode should be started. The value is in %. In the default case the configured defense mode is immediately activated. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0-100 PERSIST: YES DEFVALUE: 80 UNITS: % " ::= { eqptPowerEntry 12} eqptPowerACState OBJECT-TYPE SYNTAX INTEGER { no-powermgnt (0), active (1), active-failure (2), failure (3) } ACCESS read-only STATUS mandatory DESCRIPTION " The AC power state will provide an view on the state of the AC Power supply. The value is different from no-powermgnt (0) for devices with power management functionality and AC input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 13} eqptPowerACFailure OBJECT-TYPE SYNTAX INTEGER { not-applicable (0), voltage-good (1), voltage-out-of-range (2) } ACCESS read-only STATUS mandatory DESCRIPTION " The AC failure state will provide an view on the failure state of the AC power supply. This failure state has meaning when eqptPowerACstate different from default. In other cases not-applicable (0) is returned. Specific ranges for the failure cases strongly depend on the AC power used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not-applicable 1 = voltage good 2 = voltage out of range ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 14} eqptPowerNDCaState OBJECT-TYPE SYNTAX INTEGER { no-powermgnt (0), active (1), active-failure (2), failure (3) } ACCESS read-only STATUS mandatory DESCRIPTION " The NDCa (Network DC a) state will provide an view on the state of the Network DC Power supply. The value is different from no-powermgnt (0) for devices with power management functionality and NDC a input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 15} eqptPowerNDCaFailure OBJECT-TYPE SYNTAX INTEGER { not-applicable (0), voltage-good (1), low-voltage(2), under-voltage(3) } ACCESS read-only STATUS mandatory DESCRIPTION " The NDCa failure state will provide an view on the failure state of the Network DC a power supply. This failure state has meaning when eqptPowerNDCaState different from default. In other cases not-applicable (0) is returned. Specific ranges for the failure cases strongly depend on the DC power used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not-applicable 1 = voltage-good 2 = low-voltage 3 = under-voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 16} eqptPowerNDCbState OBJECT-TYPE SYNTAX INTEGER { no-powermgnt (0), active (1), active-failure (2), failure (3) } ACCESS read-only STATUS mandatory DESCRIPTION " The NDCb (Network DC a) state will provide an view on the state of the Network DC b power supply. The value is different from no-powermgnt (0) for devices with power management functionality and NDC b input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 17} eqptPowerNDCbFailure OBJECT-TYPE SYNTAX INTEGER { not-applicable (0), voltage-good (1), low-voltage(2), under-voltage(3) } ACCESS read-only STATUS mandatory DESCRIPTION " The NDCb failure state will provide an view on the failure state of the Network DC b power supply. This failure state has meaning when eqptPowerNDCbState different from default. In other cases not-applicable (0) is returned. Specific ranges for the failure cases strongly depend on the DC power used. The ranges will be detailed in the customer documentation. Enumeration is as follows: 0 = not-applicable 1 = voltage-good 2 = low-voltage 3 = under-voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 18} eqptPowerLDCaState OBJECT-TYPE SYNTAX INTEGER { no-powermgnt (0), active (1), active-failure (2), failure (3) } ACCESS read-only STATUS mandatory DESCRIPTION " The LDCa power state will provide an view on the state of the local DC a power supply. The value is different from no-powermgnt (0) for devices with power management functionality and LDC a input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 19} eqptPowerLDCaFailure OBJECT-TYPE SYNTAX INTEGER { not-applicable (0), voltage-good (1), voltage-out-of-range (2) } ACCESS read-only STATUS mandatory DESCRIPTION " The LDCa failure state will provide an view on the failure state of the local DC a power supply. This failure state has meaning when eqptPowerLDCaState different from default. In other cases not-applicable (0) is returned. Enumeration is as follows: 0 = not-applicable 1 = voltage good 2 = voltage out of range ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 20} eqptPowerLDCbState OBJECT-TYPE SYNTAX INTEGER { no-powermgnt (0), active (1), active-failure (2), failure (3) } ACCESS read-only STATUS mandatory DESCRIPTION " The LDCb power state will provide an view on the state of the local DC b power suply. The value is different from no-powermgnt (0) for devices with power management functionality and LDC b input available. Enumeration is as follows: 0 = no-powermgnt 1 = active 2 = active-failure, i.e. in failure, but still providing power 3 = failure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 21} eqptPowerLDCbFailure OBJECT-TYPE SYNTAX INTEGER { not-applicable (0), voltage-good (1), voltage-out-of-range (2) } ACCESS read-only STATUS mandatory DESCRIPTION " The LDCb failure state will provide an view on the failure state of the local DC b power supply. This failure state has meaning when eqptPowerLDCbState different from default. In other cases not-applicable (0) is returned. Enumeration is as follows: 0 = not-applicable 1 = voltage good 2 = voltage out of range ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: 0 UNITS: - " ::= { eqptPowerEntry 22} eqptPowerInVoltage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Measured incoming voltage in 1/10 Volt Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 2650 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Volt " ::= { eqptPowerEntry 23} eqptPowerInCurrent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Measured incoming current in 1/10 Ampere Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 60 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Ampere " ::= { eqptPowerEntry 24} eqptPowerInConsumedPower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Calculated incoming consumed power in 1/10 Watt Only supported for devices that host an extended power management function (e.g RANI-B and RPNI-B). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 6000 PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Watt " ::= { eqptPowerEntry 25} -- ================================================================== -- | STOP POWER MANAGEMENT OBJECTS | -- ================================================================== -- ================================================================== -- | START POWER SUPPLY MANAGEMENT TABLE | -- ================================================================== eqptPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Equipment power table, representing the power suplly management objects This table contains one row per power supply supported on the system. In other cases no entry is instantiated. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { asamEquipmentMIB 19 } eqptPowerSupplyEntry OBJECT-TYPE SYNTAX EqptPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the equipment power table. An entry will be instantiated per power supply supported on the system. ALCATEL NOTE: SUPPORT: YES " INDEX { eqptPowerSupplyId } ::= { eqptPowerSupplyTable 1 } EqptPowerSupplyEntry ::= SEQUENCE { eqptPowerSupplyId EqptPowerSupplyIndex, eqptPowerSupplyPartNumber OCTET STRING, eqptPowerSupplyCleiCode OCTET STRING, eqptPowerSupplySerNumber OCTET STRING, eqptPowerSupplyVin INTEGER, eqptPowerSupplyIin INTEGER, eqptPowerSupplyVout INTEGER, eqptPowerSupplyIout INTEGER, eqptPowerSupplyTemperature INTEGER, eqptPowerSupplyFaultVin INTEGER, eqptPowerSupplyFaultVout INTEGER, eqptPowerSupplyFaultIin INTEGER, eqptPowerSupplyFaultIout INTEGER, eqptPowerSupplyFaultTemperature INTEGER, eqptPowerSupplyFaultCml INTEGER, eqptPowerSupplyPresent INTEGER, eqptPowerSupplyFaultDetected INTEGER } eqptPowerSupplyId OBJECT-TYPE SYNTAX EqptPowerSupplyIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "Index in equipment Power Supply Table. This is a number representing the Nth power supply present in the system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptPowerSupplyEntry 1} eqptPowerSupplyPartNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(13)) ACCESS read-only STATUS mandatory DESCRIPTION " Report the part number of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 2} eqptPowerSupplyCleiCode OBJECT-TYPE SYNTAX OCTET STRING(SIZE(11)) ACCESS read-only STATUS mandatory DESCRIPTION " Report the CLEI code of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 3} eqptPowerSupplySerNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(19)) ACCESS read-only STATUS mandatory DESCRIPTION " Report the serial number of the installed power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 4} eqptPowerSupplyVin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Report the incoming voltage arriving at the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 5} eqptPowerSupplyIin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Report the incoming current arriving at the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 6} eqptPowerSupplyVout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Report the output voltage provided by the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 7} eqptPowerSupplyIout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Report the output current provided by the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 8} eqptPowerSupplyTemperature OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Report the temperature of the power supply in millidegree ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 9} eqptPowerSupplyFaultVin OBJECT-TYPE SYNTAX INTEGER { no-error (0), input-overvoltage-fault (1), input-overvoltage-warning (2), input-undervoltage-warning (3), input-undervoltage-fault (4), input-ac-nok-fault (5), input-ac-nok-warning (6), unit-off-for-insufficient-input-voltage (7) } ACCESS read-only STATUS mandatory DESCRIPTION " Report the fault or warning occurring for the input voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 10} eqptPowerSupplyFaultVout OBJECT-TYPE SYNTAX INTEGER { no-error (0), output-overvoltage-fault (1), output-overvoltage-warning (2), output-undervoltage-warning (3), output-undervoltage-fault (4) } ACCESS read-only STATUS mandatory DESCRIPTION " Report the fault or warning occurring for the output voltage ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 11} eqptPowerSupplyFaultIin OBJECT-TYPE SYNTAX INTEGER { no-error (0), input-overcurrent-fault (1), input-overcurrent-warning (2), input-overpower-warning (3) } ACCESS read-only STATUS mandatory DESCRIPTION " Report the fault or warning occurring for the input current ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 12} eqptPowerSupplyFaultIout OBJECT-TYPE SYNTAX INTEGER { no-error (0), output-overcurrent-fault (1), output-overcurrent-warning (2), output-undercurrent-warning (3), output-undercurrent-fault (4) } ACCESS read-only STATUS mandatory DESCRIPTION " Report the fault or warning occurring for the output current ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 13} eqptPowerSupplyFaultTemperature OBJECT-TYPE SYNTAX INTEGER { no-error (0), overtemperature-fault (1), overtemperature-warning (2), undertemperature-warning (3), undertemperature-fault (4) } ACCESS read-only STATUS mandatory DESCRIPTION " Report the fault or warning occurring for the tempertaure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 14} eqptPowerSupplyFaultCml OBJECT-TYPE SYNTAX INTEGER { no-error (0), invalid-or-unsupported-command-received (1), invalid-or-unsupported-data-received (2), packet-error-check-failed (3), memory-fault-detected (4), processor-fault-detected (5), other-communication-fault (6), other-memory-or-logic-fault (7) } ACCESS read-only STATUS mandatory DESCRIPTION " Report the fault or warning occurring for the tempertaure ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 15} eqptPowerSupplyPresent OBJECT-TYPE SYNTAX INTEGER { yes (0), no (1) } ACCESS read-only STATUS mandatory DESCRIPTION " Report if the power supply is present. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 16} eqptPowerSupplyFaultDetected OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } ACCESS read-only STATUS mandatory DESCRIPTION " Report if a fault has been detected. If yes, then eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout, eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut, eqptPowerSupplyFaultTemperature or eqptPowerSupplyFaultCml is reporting an error. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerSupplyEntry 17} -- ================================================================== -- | STOP POWER SUPPLY MANAGEMENT TABLE | -- ================================================================== eqptPowerSupplyRftc OBJECT IDENTIFIER ::= { asamEquipmentMIB 20 } -- ================================================================== -- | START POWER SUPPLY RFT-C COMMON TABLE | -- ================================================================== eqptPowerRftcTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptPowerRftcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Equipment RFT-C power table, representing the RFT-C management objects This table contains one row per RFT-C module supported on the system. In other cases no entry is instantiated. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { eqptPowerSupplyRftc 1 } eqptPowerRftcEntry OBJECT-TYPE SYNTAX EqptPowerRftcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the equipment RFT-C power table. ALCATEL NOTE: SUPPORT: YES " INDEX { eqptPowerRftcId } ::= { eqptPowerRftcTable 1 } EqptPowerRftcEntry ::= SEQUENCE { eqptPowerRftcId EqptHolderIndex, eqptPowerRftcVCommon INTEGER, eqptPowerRftcICommon INTEGER, eqptPowerRftcTHotspot INTEGER, eqptPowerRftcTAmbient INTEGER, eqptPowerRftcSWVersion DisplayString, eqptPowerRftcHWVersion DisplayString, eqptPowerRftcHWRevision INTEGER, eqptPowerRftcSerialnumber DisplayString, eqptPowerRftcManufacturer DisplayString, eqptPowerRftcLineCount INTEGER } eqptPowerRftcId OBJECT-TYPE SYNTAX EqptHolderIndex ACCESS read-only STATUS mandatory DESCRIPTION "Index in equipment Power RFT-C Table. This is a number represents the shelf containting the RFT-C module. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptPowerRftcEntry 1} eqptPowerRftcVCommon OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Report the common voltage arriving at the power supply in millivolt ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: mV " ::= { eqptPowerRftcEntry 2} eqptPowerRftcICommon OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Report the common current arriving at the power supply in milliampere ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: mA " ::= { eqptPowerRftcEntry 3} eqptPowerRftcTHotspot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Report the temperature of the power supplys hotspot in degrees celcius ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: °C" ::= { eqptPowerRftcEntry 4} eqptPowerRftcTAmbient OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Report the ambient temperature of the power supply in degrees celcius ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: °C" ::= { eqptPowerRftcEntry 5} eqptPowerRftcSWVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " Report the software version of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerRftcEntry 6} eqptPowerRftcHWVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " Report the hardware version of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerRftcEntry 7} eqptPowerRftcHWRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Report hardware revision of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerRftcEntry 8} eqptPowerRftcSerialnumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " Report serial number of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerRftcEntry 9} eqptPowerRftcManufacturer OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION " Report the manufacturer code of the RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerRftcEntry 10} eqptPowerRftcLineCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Report the number of lines used on this RFT-C power supply ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - " ::= { eqptPowerRftcEntry 11} -- ================================================================== -- | STOP POWER SUPPLY RFT-C COMMON TABLE | -- ================================================================== -- ================================================================== -- | START POWER SUPPLY RFT-C LINE TABLE | -- ================================================================== eqptPowerRftcLineTable OBJECT-TYPE SYNTAX SEQUENCE OF EqptPowerRftcLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above" ::= { eqptPowerSupplyRftc 2 } eqptPowerRftcLineEntry OBJECT-TYPE SYNTAX EqptPowerRftcLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the eqptPowerRftcLineTable. ALCATEL NOTE: SUPPORT: YES" INDEX { eqptPowerRftcId, eqptPowerRftcLineId } ::= { eqptPowerRftcLineTable 1 } EqptPowerRftcLineEntry ::= SEQUENCE { eqptPowerRftcLineId INTEGER, eqptPowerRftcLineStatus EqptPowerRftcLineStatus } eqptPowerRftcLineId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Report the line number ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptPowerRftcLineEntry 1 } eqptPowerRftcLineStatus OBJECT-TYPE SYNTAX EqptPowerRftcLineStatus ACCESS read-only STATUS mandatory DESCRIPTION "Report the line status. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { eqptPowerRftcLineEntry 2 } END