ASAM-SYSTEM-MIB DEFINITIONS ::= BEGIN -- ============================================================================= -- This specification is published by Alcatel-Lucent under Non-Disclosure -- Agreement(s) (NDA) with specific parties and has to be considered as -- Confidential Information as defined in such NDA. -- Alcatel-Lucent reserves the right to revise this document for any reason, -- including but not limited to conformity with standards promulgated by -- various agencies, utilisation of advances in the state of the technical -- areas, or the reflection of changes in the design of any equipment, -- techniques, or procedures described or referred to herein. -- The product specifications and other technical or performance information -- contained herein are subject to change without notice. -- Updates of this document will be issued under the above NDA's. -- Alcatel-Lucent makes no representation or warranty, expressed or implied, -- with respect to the sufficiency, accuracy, or utility of any information or -- opinion contained herein. Alcatel-Lucent expressly advises that any use of -- for any purpose or reliance upon this technical reference is at the risk of -- the user and that Alcatel-Lucent shall not be liable for any damage or -- injury incurred by any person arising out of the sufficiency, accuracy, or -- utility of any information or opinion contained herein. -- This document is not to be construed as a suggestion to any manufacturer -- to modify or change any of its products, nor does this document represent -- any commitment by Alcatel-Lucent to sell or purchase any product. -- Nothing contained herein shall be construed as conferring by implication, -- estoppel, or otherwise any license or right under any patent, whether or -- not the use of any information herein necessarily employs an invention of -- any existing or later issued patent. -- Alcatel-Lucent reserves the right not to offer any or all of these products -- and to withdraw any or all of them at any future time. -- Copyright (C) 2010, Alcatel-Lucent. All Rights Reserved. -- ============================================================================= -- -- MODULE-IDENTITY -- LAST-UPDATED "201609280000Z" -- ORGANIZATION "Nokia" -- CONTACT-INFO "email:asam.mibsupport@alcatel-lucent.com" -- DESCRIPTION -- "The ASAM System MIB contains objects from very diverse domains. -- Basically, it groups a number of objects that did not find a place -- in the other ASAM MIBs." -- -- REVISION "2017100600000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 105 DropStandbyLinkTraffic (ISR5602 ALU02391965: -- [MX][Static LAG] Standby link is forwarding traffic -- from network to LEMI - users) -- -- REVISION "201703100000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR57 ALU02331338, ALU02291323) -- 90 LimitedTL1ForXGSPON -- 91 IsAttAricentOntSupported -- -- REVISION "201703100000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5102q ALU02209041) -- 89 FwWatchdogFeatureForL2PlusLt -- -- REVISION "201703060000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5601 ALU02097716 ALU02097756 ALU02337081) -- 88 PmCdrCount5Min -- -- REVISION "201702230000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR56 ALU02097709 ALU02333221) -- 87 IsSipSelfRingingSupported -- -- REVISION "201701030000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5601 ALU02279440 ALU02331340) -- 86 MigrationNDLTCtoNDLTKAllowed -- -- REVISION "201701030000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR57 ALU02130289 ISR5601 ALU02327994) -- 85 DtagAlarmsForClockDefects -- -- REVISION "201701030000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5601 ALU02183319 ALU02326253) -- 84 EfmOamOrgSpecOlidSupport -- -- REVISION "201701030000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5501EF ALU02307618) -- 83 SupportNotTodOntClockSync -- -- REVISION "201612170000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR56 ALU02301192) -- 81 IsMegacoLawfulInterceptSupported -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR56 ALU02283589) -- 82 MiiUniversalBbServSupport -- -- REVISION "201611210000Z" -- DESCRIPTION -- Editor: James LUO -- Changes: -- Add new MIB:asamSystemMIB 62/63/64/65 (ISR56 ALU02270522). -- -- REVISION "201605240000Z" -- DESCRIPTION -- Editor: Erik Umans -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR56 ALU02287649) -- 79 ArpRemoteIdCheckDisable -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR56 ALU02287529) -- 80 VplusVectLowspectrumOnlySupported -- -- REVISION "201609280000Z" -- DESCRIPTION -- Editor: Giridhararoopan Gangatharan -- Changes: -- RCR ALU02171369: add new object asamRelayIdSyntax to asamSystemMIB -- Also add new field asamAccessNtPortSyntax to asamAccessLoopIdSyntax -- REVISION "201608290000Z" -- DESCRIPTION -- Editor: Murugan Balraj -- Changes: -- updated licenseFeatureIndex for ERPS Feature. -- REVISION "201605240000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR56 ALU02188042) -- 78 CablePairIdentificationEnhancement -- -- REVISION "201605240000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5501 ALU02272081) -- 77 ArpPollingAndSnooping -- -- REVISION "201605240000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5202d ALU02268809) -- 76 GponIsSupportingRunTimeSetMcPbit -- -- REVISION "201605240000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5302d ALU02253541, ISR5501 ALU02254714) -- 75 VvplsUnknownMcDrop -- -- REVISION "201605240000Z" -- DESCRIPTION -- Editor: Tom Van Peteghem -- Changes: -- FR ALU02212385 : asamTechSupportActionFile length is (0-255) in MIB, -- but Node not accepting empty string -- Changed range for -- asamTechSupportSessionFile OBJECT-TYPE -- asamTechSupportActionFile OBJECT-TYPE -- from 0..255 to 1..255 -- -- REVISION "201605240000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- RCR ALU02195802 -- Add new field asamSystemRFOverlayModule to enable or disable the RF Overlay Module -- -- REVISION "201605180000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5501 ALU02163221) -- 74 RemoveDhcpSessionIfPortAdminDown ALU02198126 -- -- REVISION "201605130000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended (ISR5501 ALU02163221) -- 73 SupportRemoteShelfOnLtPort -- -- REVISION "201605020000Z" -- DESCRIPTION -- Editor: Dominic L A J S -- Changes: -- RCR ALU02074765 : Zero-touch provisioning - solution -- Zero touch provision (ZTP) support for ISAM -- Add new field for Zero-touch provisioning state -- asamSystemZTPState -- -- REVISION "201603220000Z" -- DESCRIPTION -- Editor: Tom Van Peteghem -- Changes: -- RCR ALU02116497 : Operator triggered (on-demand) TS-file -- generation for datapath troubleshooting - Legacy Fiber LTs -- Add new fields for On Demand TechSupport file generation -- asamTechSupportOnDemandFreeSessionId -- asamTechSupportActionTable -- asamTechSupportSessionTable -- -- REVISION "201602010000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 72 IsStunnelMipSupported -- -- REVISION "201602010000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 69 MigrationRDLTCtoRDLTDAllowed -- 70 MigrationNDLTFtoNDLTJAllowed -- 71 MigrationNDLTGtoNDLTKAllowed -- -- REVISION "201602010000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended as they were missing -- 60 QosBandwidtProfileConfigOnUni -- 61 QosQueuesAggrConfigSupport -- 62 ModifyNbrOfPortsOnOntCardAllowed -- 63 LtBootPriority -- 64 NetworkItfMtuDefault -- -- REVISION "20151207100000Z" -- DESCRIPTION -- Editor: Patrick Codron -- Changes: -- TechSupport enable/disable + purge files -- Reset Root Cause Analyzer - Part Ia ISR54 ALU02033829 -- -- REVISION "201601040000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 68 LldpSubtypeInterfaceName ISR5404 -- -- REVISION "201511080000Z" -- DESCRIPTION -- "Editor:Qiong K WU -- Changes: -- RCR: ALU02004304, Next generation NT (FANT-G) -- Add two objects asamSystemScalingMode and asamSystemOperationalScalingMode " -- REVISION "201510160000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 67 ReducedPresenceIndicationTimeout ISR5403w -- -- REVISION "201512060000Z " -- DESCRIPTION -- Editor: LU Hao D -- Changes: -- Add licenseFeatureIndex for VULA in RCR ALU02023899 -- -- REVISION "20151027100000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 66 CpuFilterPortRange ISR54 ALU01999842 -- -- REVISION "201510160000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 64 NetworkItfMtuDefault ISR5202 -- 65 RemovePasswordSpecialCharReq ISR53 -- -- REVISION "201516100000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 59 IsQosMarkerProfInnerPbitSupported ISR5201 ALU02073027 ALU02091526 ALU02091549 -- -- REVISION "201506100000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 58 DisableSfpAlcatelStringCheckPtpLt ISR5201 ALU02064549 ALU02089457 ALU02089457 -- -- REVISION "201506080000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 57 MaskParityError ISR5201 ALU01861706 -- -- REVISION "201506060000Z" -- DESCRIPTION -- Editor: Tom Batsele -- Changes: -- systemmac applicable for ISAM 7367 SX/ 7363 MX systems (Standalone Single-board Vectoring Box and NGVR) -- ALU02074195 Show system MAC address on SX and MX -- -- REVISION "201504170000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 56 HguTr069Configuration ISR53 ALU02047957 ALU02069691 -- -- REVISION "201503130000Z " -- DESCRIPTION -- "Version: -- Editor: Sebastien Deronne -- Changes: RCR ALU01936333 : G.Fast support " -- -- REVISION "201502270000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtented -- 55 UseSpecificHoldOffTime ISR5201 ALU01977350 ALU02053292 -- -- REVISION "201502200000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 53 SwPoliceNdMldProtoAt100Pps ISR52 ALU02026722 -- 54 IsPPPOEDownstreamRelayEnabled ISR5201 ALU01894700 ALU01991513 -- -- REVISION "201501050000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- Add new bitpositions to asamSystemActivatedCDEExtended -- 49 EponUniDimensionScaleup -- 50 EontPerformanceMonitorOptimization -- 51 EponQuickPonCutover -- 52 PppDhcpTlv90Tlv91OptionAdd -- -- REVISION "201411050000Z " -- DESCRIPTION -- "Version: -- Editor: Gerda Mertens -- Changes: RCR ALU01985707 : Vplus support " -- -- REVISION "201410020000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Changes: -- * ALU01884252 Extend the CDE bitmap > 32 entries -- Added MIB Object asamSystemActivatedCDEExtented" -- -- REVISION "201405200000Z" -- DESCRIPTION -- "Editor: Liangming Cheng -- Changes: -- * RCR ALU01863065: Supporting of selection of voice image (H248/SIP) to run -- "Add a new OID: asamSystemVoiceOswp" -- -- REVISION "201310100000Z" -- DESCRIPTION -- "Editor: Balaji Thirunavukkarasu -- Changes: -- * R5.0 RCR ALU01878634 -- "Add asamSystemAutoSwitchAtmPtm and asamSystemAutoSwitchVdslStepUpDelay" -- -- REVISION "201310080000Z" -- DESCRIPTION -- "Editor: Zhigang B Long -- Changes: -- RCR ALU01887505 : NGVR support GPON uplink. -- * Add two new object IDs: asamSystemUplinkMode and -- asamSystemCurrentUplinkMode." -- -- REVISION "201309250000Z" -- DESCRIPTION -- "Editor: Sowrirajan Padmanabhan -- Changes: -- * Add extra licence key 38 -- "Ethernet OAM Y1731 Performance monitoring functions" -- -- REVISION "201309180000Z" -- DESCRIPTION -- "Editor: Tom Van Peteghem -- Changes: -- * Add extra licence key 37 -- "Vlan Translation Table Extended Usage" -- -- REVISION "201308010000Z" -- DESCRIPTION -- "Editor: Balaji Thirunavukkarasu -- Changes: RCR ALU01878634 : Auto-switching between ATMoADSL and PTMoVDSL -- * Add asamSystemAutoSwitchAtmPtm and asamSystemAutoSwitchVdslStepUpDelay -- -- REVISION "201303250000Z" -- DESCRIPTION -- Editor:Poongothai Kuppusamy Sampath -- Changes: -- * Modify description of 'NT MPLS' -- to 'MPLS Advanced Resiliency' -- -- REVISION "201303010000Z" -- DESCRIPTION -- "Editor:Stefan Sturm -- Changes: -- * remove asamEthernetShapingRate since obsolete for all NT typess -- -- REVISION "201302140000Z" -- DESCRIPTION -- "Version:3FE21961EAAA_FDT1238.V4.5.1.10.1 -- Editor:Karthik Chandra Bose S -- Changes: -- * Modify description of '802.1Q CCI enabled MEPS' -- to 'Ethernet OAM Advanced Monitoring Functions' -- -- REVISION "201301170000Z" -- DESCRIPTION -- "Version: -- Editor:Jianhong Fu -- Changes: -- * Add asamSystemCustomerId for ISR4.6 (RCR ALU01849954) -- -- REVISION "201209100000Z " -- DESCRIPTION -- "Version: -- Editor: Luc Hordies -- Changes: RCR ALU01802654 : Crosstalk cancellation from legacy lines into -- G.vector lines in DS " -- -- REVISION "201208310000Z" -- DESCRIPTION -- "Version: -- Editor:Lakshmi Eswaran -- Changes: -- * Add asamSystemALSState for ISR4.5 (ALU01809489) -- REVISION "201207180000Z" -- DESCRIPTION -- "Version: -- Editor:Feifei Shang -- Changes: -- * Add timeZoneOffset(24) for ISR4.5 -- REVISION "201201270000Z" -- DESCRIPTION -- "Version:3EC15532AAAA_V4.4.0.0.2 -- Editor:Gerrit Verdickt -- Changes: -- * Add systemMaxLtLinkSpeed fortygbps(40) -- * Add licenseFeatureIndex for 40 Gbps enabled LT -- -- -- REVISION "201111170000Z" -- DESCRIPTION -- "Version:3EC15532AAAA_V4.4.0.0.1 -- Editor:Tom Batsele -- Changes: -- * Add 1 license counter for MPLS -- -- REVISION "201111090000Z" -- DESCRIPTION -- "Version:3EC15532AAAA_V4.4.0.0.0 -- Editor:Rommy Volders -- Changes: -- * Add 1 license counter for 802.1Q CCI enabled MEPS -- -- REVISION "201104261200Z" -- DESCRIPTION -- "Version:3EC15532EAAA_FDT1170.V4.3.0.3.1 -- Editor:Arulmurugan Velumani -- Changes: -- * Add new license counter for : Green DSL L2 mode -- -- REVISION "201101280000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_FDT1205.V4.3.0.2.1 -- Editor: Zhang YI M -- Changes: ALU00979025 Extend size of loop-id-syntax from 64 to 80" -- -- REVISION "201101140000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.3.0.0.0 -- Editor: Gerda Mertens -- Changes: RCR ALU00123664 Licensing support for Vectoring on VDSL2" -- -- REVISION "201010220000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.2.0.9.0 -- Editor: Bozhi Zheng -- Changes: RCR ALU00123702, comment the counter of license key shdsl-ctc" -- -- REVISION "201007290000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.2.0.5.0 -- Editor: Karel Meijfroidt -- Changes: ALU00721710 Extend size of asamMibVersion object" -- -- REVISION "201005310000Z" -- ORGANIZATION "Alcatel-Lucent" -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.2.0.5.0 -- Editor: Bart Libert -- Changes: -- * FR ALU00159851 -- removed clock related elements that are now in the NRT_MIB -- -- REVISION "201005270000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.2.0.0.1 -- Editor: Luc Gijselink -- Changes: Licensing support for Gxr (RAC) -- ALU00159917" -- -- REVISION "201005310000Z" -- ORGANIZATION "Alcatel-Lucent" -- DESCRIPTION -- "Version: 3EC15532AAAA_ V4.2.0.0.8 -- Editor: Gang Zhu -- Changes: -- * Licensing support for IPv6 security on RCR ALU00123682 -- -- REVISION "201005310000Z" -- ORGANIZATION "Alcatel-Lucent" -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.2.0.0.8 -- Editor: Gang Zhu -- Changes: -- * Licensing support for IPv6 security on RCR ALU00123682 -- -- REVISION "201004080000Z" -- ORGANIZATION "Alcatel-Lucent" -- DESCRIPTION -- "Version: 3EC15532EAAA_V4.1.0.1.3 -- Editor: Lieve Dierick -- Changes: -- * FR ALU00249381 -- asamShutdownBitMap range value (1..4294967295) replaced by (0..4294967295)" -- -- REVISION "201002110000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_ V4.2.0.0.2 -- Editor: Miranda De Bock -- Changes: IR ANTmt: -- - add 10Gbps and 20Gbps to asamSystemLicenseMgmtTable -- - add tengbps and twentyGbps to systemMaxLtLinkSpeed -- -- REVISION "201001280000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.2.0.0.1 -- Editor: Karel Meijfroidt -- Changes: License support for ARQ" -- -- REVISION "200911050000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_ V4.0.10.0.1 -- Editor: Yihui Zhang -- Changes: - Disable asamProtocolSyntaxConfigurationTable support, -- all syntax string and port number method object become system level configuration. -- New syntax string introduced for GPON LT. (BDFam52637)" -- -- REVISION "200910270000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_V4.2.0.0.0 -- Editor: Lieve Dierick -- Changes: Licensing support for SRA on VDSL2 -- ANTmt15167" -- -- REVISION "200909230000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_ V4.1.0.0.5 -- Editor: Peter Van Mele -- Changes: - Licensing support for SHSL cross-talk cancellation -- ANTmt76246 -- - Document how to see difference between ETSI and ANSI stream" -- -- REVISION "200908250000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_ V4.1.0.0.4 -- Editor: Peter Van Mele -- Changes: Licensing support for NT load balancing/redundancy -- ANTmt72355" -- -- REVISION "200907150000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V4.0.0.2.1 -- Editor: Patrick Swinkels -- Changes: -- * RCR ANTmt37998 - Synchronisation - DTAG requirements -- * RCR ANTmt52520 : Sync DTAG MIB impact drop in mainstream." -- -- REVISION "2009081350000Z " -- DESCRIPTION -- "Version: 3EC15532AAAA_ V4.1.0.0.6 -- Editor: Sven Dhuyvetter -- Changes: Management port on FD-REM -- ANTmt62854 - R3.7.01 (ARCOR maintenance release) -- ANTms55514 - R4.1 (general customer release). -- -- -- REVISION "200907100000Z" -* July 10, 2009 -- DESCRIPTION -- "Version: 3EC15532EAAA_V4.0.0.2.0 -- Editor: Jean Samoise -- Changes: -- * IR ANTmt55931: -- HighCap NT-LT auto-neg: add systemMaxLtLinkSpeed." -- -- REVISION "200906030000Z" -* June 3, 2009 -- DESCRIPTION "Version: 3EC37309EAAA_V4.0.0.3.0 -- Editor: Karel Meijfroidt -- * ANTmt55877: Rebase latest version of the MIB to R4.0.02." -- -- REVISION "200904070000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V4.0.0.2.0 -- Editor: Karel Meijfroidt -- Changes: -- * IR ANTmt52100 : -- Merged R3.7.10 version of the MIB to R4.0.02. This includes -- the changes done by Lucien Marcotte for SYNCE feature (Basic -- and Enhanced Clock Mgmt objects)." -- -- -- REVISION "200904150000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V4.1.0.1.0 -- Editor: Diankun Zhang -- Changes: -- * RCR ANTms03717 : -- Update description of item operateStatus of cpuLoadEntry : -- finished(4) should be idle(4)." -- -- REVISION "200902200000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V4.0.0.1.1 -- Editor: Karel Meijfroidt -- Changes: -- * FR ANTmt39491 : -- Change description of some of the license counters." -- -- REVISION "200807300000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.7.1.1.0 -- Editor: Sven Dhuyvetter -- Changes: -- * RCR ANTms79645 : Network port addressing change -- introduce new port addressing mode: sequential/slotBased." -- -- REVISION "200811210000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.7.0.0.1 -- Editor: Li Jie -- Changes: -- * update asamSysStatusBitMap description: -- Bit 8: this bit indicates that alarm 'Invalid xVPS Pair -- Redundancy Data' (LSM Redundancy 131 nbr 2) was raised. -- The purpose of using this bit is to clear this alarm -- by using asamSysStatusClearBitMap. -- The purpose of using this bit is to clear the alarms 'Invalid -- xVPS Pair Redundancy Data' by using asamSysStatusClearBitMap." -- -- REVISION "200806180000Z" -- DESCRIPTION -- "Version:3EC15532EAAA_V3.7.1.0.0 -- Editor: Shaistha Rumana -- Changes: -- *"additional object asamActualSysClkBITSMode is supported -- from R37 onwards." -- REVISION "200803130000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.7.0.0.0 -- Editor: Zheng Bozhi -- Change: -- * ANTms51673: Annex-J/M on IFX 72p MultiADSL ISDN" -- REVISION "200709260000Z" -- DESCRIPTION -- "Version:3EC15532EAAA_V3.5.0.2.1 -- Editor: Shwetha Bhaskar -- Changes: -- * additional value for actual-clock-priority removed -- from this release onwards. -- * new value removed under the type -- SysClkSrcPriorityScheme." -- -- REVISION "200710240000Z" -- DESCRIPTION -- "Version:3EC15532EAAA_V3.5.0.2.0 -- Editor: Shwteha Bhaskar -- Changes: -- * additional value for external-source supported -- from this release onwards.FR ANTms62849 triggering these changes. -- * new value added under the type -- asamSysClkBITSMode." -- -- REVISION "200710260000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.6.0.0.0 -- Editor: Daniel Gravelle -- Changes: -- * RCR ANTms35338: CDE Framework. -- Added MIB Objects asamSystemAccessOperatorID and -- asamSystemActivatedCDE for CDE Framework support." -- -- REVISION "200709260000Z" -- DESCRIPTION -- "Version:3EC15532EAAA_V3.4.0.2.0 -- Editor: Prashant Srivastava -- Changes: -- * additional value for actual-clock-priority supported -- from this release onwards. FR ANTms35449 triggering -- these changes. -- * new value added under the type -- SysClkSrcPriorityScheme." -- -- REVISION "200706260000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.5.0.0.3 -- Editor: Jean-Claude Del Col -- Changes: -- * RCR BDFhw77928 : VDSL2 IKA ADSL1/2 PSD shaping. -- Add a new license counter for ADSL1/2 PSD shaping : update -- of licenseFeatureIndex entry and licenseCounter." -- -- REVISION "200706140000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.5.0.0.2 -- Editor: Fan Min -- Changes: -- * update asamSysStatusBitMap description: -- Bit 7: this bit indicates that one or several alarms (PlugInUnit2 alarm nbr 11) -- were raised. -- The purpose of using this bit is to clear the alarms by -- using asamSysStatusClearBitMap." -- -- REVISION "200705290000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.5.0.0.1 -- Editor: Bakri Aboukarr -- Changes: -- * update asamSystemId description: Accept all printable characters" -- -- REVISION "200705030000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.5.0.0.0 -- Editor: Jean-Claude Del Col -- Changes: -- * Add new license counter for : -- 1.XDSL per-line Overrule. -- 2.Impulse Noise sensor." -- -- REVISION "200703120000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.4.0.0.1 -- Editor: Laurent Deru -- Changes: -- * Add new license counter for UPBO Policing : update of -- licenseFeatureIndex entry and licenseCounter entry." -- -- REVISION "200702150500Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.4.0.0.0 -- Editor: Kou Jinhai -- Changes: -- * Add swVersion group for show SW version. -- Add systemMonitor group for monitor CPU load and memory usage and -- show the result of monitoring." -- -- REVISION "200702141200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.3.0.3.0 -- Editor: Mohan Babu.M -- Changes: -- *Support for underscore character in the System Id." -- -- REVISION "20061113000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.3.0.2.0 -- Editor : Katrien SCHARRE -- Changes: -- *Add text convention RowConfigState." -- -- REVISION "20060926000Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V3.3.0.0.0 -- Editor: Kou Jinhai -- Changes: -- * Environment monitor relay group is added to support configurable -- enable/disable of this environment monitor relay feature." -- -- REVISION "20060100900Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_E3.1.0.0 -- Editor: ma liya -- Changes: -- * asamAccessLoopIdSyntax group is added to support configurable Line -- Id and the format of option82. -- The syntax of asamSystemID is changed to extend system ID to 64 -- characters from 20 characters." -- -- REVISION "200512021200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_E2.4.3.0.0 -- Editor: Satish Balagopalan -- Changes: -- * RCR BDFhw37384: Support for BITS two external clock sources." -- -- REVISION "20601231200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_V2.4.3.0.0 -- Editor: Manjunath.marigoudar@Wipro Technologies -- Changes: -- * (asamCraftLoginStatus) new variable added in changeOccuredtrap." -- -- REVISION "200507051200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_E2.4.0.0 -- Editor: Li Jing -- Changes: -- * RCR BDFhw34319 - an item of licenseFeatureIndex -- is added for IPOA-CC feature." -- -- REVISION "200506041200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_E2.3.0.0 -- Editor: Pradeep Hosaritthi -- Changes: -- * RCR BDFhw37384-Clock objects support from this -- release for BITS feature." -- -- REVISION "200411221200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_E2.0.0.0 -- Editor: Jun B Zhang -- Changes: -- * license key management added." -- -- REVISION "200410141200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_E2.0.0.0 -- Editor: Steven Luykx -- Changes: -- * RCR BDhw42976 System MAC adresses added." -- -- REVISION "200401201200Z" -- DESCRIPTION -- "Version: 3EC15532EAAA_E1.0.0.0 -- Editor: Rafael Van Driessche -- Changes: -- * A number of objects that have no use for ISAM have been indicated -- as not supported. -- * Object asamMibVersion has been indicated as being non-persistent. -- * The range of object asamEthernetShapingRate has been corrected." -- -- REVISION "200107121200Z" -- DESCRIPTION -- "Version: 3EC15532AAAA_E5.0.0.0 -- Editor: Rafael Van Driessche -- Changes: -- * Object asamSysStatusSetBitMap has been made obsolete. -- * Object asamAWSnumberOfSets has been made obsolete. -- * Object asamDiskStatusBitMap has been made obsolete. -- * Object asamNetworkPosition has been made obsolete. -- * Object asamMigrationStatus has been made obsolete. -- * Objects in asamSystemClockSelect group have been made obsolete. -- * Object asamShutdownBitMap has become supported. -- * Objects have been added related with selection of the system clock. -- * Object asamSystemInitProgress has been added." -- -- REVISION "199911051200Z" -- DESCRIPTION -- "Version: 3EC15532AAAA_R3.0.1 -- Editor: unknown -- Changes: -- * asamSysStatusBitMap: new values possible for backup/restore -- * asamMibVersion object added." -- -- REVISION "199904031200Z" -- DESCRIPTION -- "Version: 3EC15532AAAA_R3.0.0 -- Editor: unknown -- Changes: -- * Add asamSystemMigration group which contains: -- - asamMigrationStatus object for database migration control. -- * Add asamSystemClockSelect group which contains: -- - objects to allow clock selection; -- - objects to reflect clock state." -- -- =========================================================================== IMPORTS asam FROM SYSTEM-MIB Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 EqptSlotIndex FROM ASAM-EQUIP-MIB MacAddress FROM BRIDGE-MIB NetworkTimeInSeconds, NetworkTimeInMiliSeconds FROM ASAM-TC-MIB DateAndTime,RowStatus,TruthValue FROM SNMPv2-TC Unsigned32 FROM SNMPv2-SMI IpAddress FROM RFC1155-SMI ; asamSystemMIB OBJECT IDENTIFIER ::= { asam 9 } asamSysBootpInfo OBJECT IDENTIFIER ::= { asamSystemMIB 2 } asamSystemMigration OBJECT IDENTIFIER ::= { asamSystemMIB 11 } asamSystemClockSelect OBJECT IDENTIFIER ::= { asamSystemMIB 12 } asamSystemLicenseMgmt OBJECT IDENTIFIER ::= { asamSystemMIB 17 } asamSysMacAdresses OBJECT IDENTIFIER ::= { asamSystemMIB 22 } asamCraftLogin OBJECT IDENTIFIER ::= { asamSystemMIB 25 } asamAccessLoopIdSyntax OBJECT IDENTIFIER ::= { asamSystemMIB 26 } environmentMonitorRelay OBJECT IDENTIFIER ::= { asamSystemMIB 27 } swVersion OBJECT IDENTIFIER ::= { asamSystemMIB 28 } systemMonitor OBJECT IDENTIFIER ::= { asamSystemMIB 29 } asamRelayIdSyntax OBJECT IDENTIFIER ::= { asamSystemMIB 58 } -- -- Part 1: Objects to specify the OAM channel via which the BOOTP request -- must be issued. These objects are not applicable for ISAM. -- asamSystemIpAtmVcVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "To issue a BOOTP request over an ATM connection on the network interface, a PVC must be defined. This is the VPI value for that PVC. ALCATEL NOTE: SUPPORT: NO INSRVMOD: YES RANGE: 0..4095 PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { asamSysBootpInfo 1 } asamSystemIpAtmVcVci OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "To issue a BOOTP request over an ATM connection on the network interface, a PVC must be defined. This is the VCI value for that PVC. ALCATEL NOTE: SUPPORT: NO INSRVMOD: YES RANGE: 0..65535 PERSIST: YES DEFVALUE: 32 UNITS: -" ::= { asamSysBootpInfo 2 } -- -- Part 2: Various system objects. -- asamSystemID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The asamSystemID object represents the SID (System ID) of the NE and is used to identify the NE. The System ID may only include printable ASCII characters from '!' (33 Decimal, 21 Hex) to '~' (126 Decimal, 7E Hex) inclusive and must be unique for each NE in a managed network. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamSystemMIB 3 } asamSysStatusBitMap OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Status bitmap: Bit 0: bit 0 is set if and only if none of the other bits is set. Bit 1: bit 1 set indicates that persistent data has been lost including data necessary to establish OAM connectivity. Bit 2: bit 2 set indicates that persistent data has been lost but not including data necessary to establish OAM connectivity. Bit 3: bit 3 set indicates that a power-on reset has occured. Notice that this also means that all reset-safe data has been lost. Bit 4: bit 4 set indicates that a reset other than a power-on reset has occured. Bit 5: not used anymore. Bit 6: this bit indicates that alarm 'SHub configuration loss' (EQUIP alarm nbr 28) was raised. The purpose of using this bit is to clear this alarm by using asamSysStatusClearBitMap. Bit 7: this bit indicates that one or several 'xVPS configuration loss' alarms (PlugInUnit2 alarm nbr 11) were raised. The purpose of using this bit is to clear the alarms by using asamSysStatusClearBitMap. Bit 8: this bit indicates that alarm 'Invalid xVPS Pair Redundancy Data' (LSM Redundancy 131 nbr 2) was raised. The purpose of using this bit is to clear this alarm by using asamSysStatusClearBitMap. Bit 9 .. 31 : reserved for future extensions. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4294967295 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { asamSystemMIB 4 } asamSysStatusClearBitMap OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS write-only STATUS mandatory DESCRIPTION "Clear status bitmap: In order to be able to clear the status bitmap, e.g. to clear the loss of persistent data alarm, this bitmap has to be used by writing a 1 to the corresponding bit position. Bit 0 in the status bitmap cannot be cleared in this way. Therefore, the system will refuse a Set request that attempts to set bit 0 in the asamSysStatusClearBitMap. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..4294967295 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { asamSystemMIB 5 } asamSysStatusSetBitMap OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS write-only STATUS obsolete DESCRIPTION "Set status bitmap: In order to be able to set the status bitmap, this bitmap has to be used by writing a 1 to the corresponding bit position." ::= { asamSystemMIB 6 } asamAWSnumberOfSets OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Reserved for AWS for synchronisation purposes." ::= { asamSystemMIB 7 } asamDiskStatusBitMap OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-write STATUS obsolete DESCRIPTION "Disk status bitmap: Bit 0: by setting bit 0, all persistent data is synced (forced) to disk. Bit 1: by setting bit 1, the ASAM disk is locked, otherwise the ASAM disk is not locked. Disk locked means it is impossible to change persistent data --> any change by a manager is ignored. Bit 2..31 : reserved for future use." ::= { asamSystemMIB 8 } asamShutdownBitMap OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "Shutdown bitmap: Bit 0: by setting bit 0, the ASAM is prepared for shutdown; it is recommended to do this before extracting the active NT in a simplex system; the bit will be cleared again by extracting and reinserting the NT board. Bit 1..31 : reserved for future use. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 0..4294967295 PERSIST: NO DEFVALUE: NA UNITS: -" ::= { asamSystemMIB 9 } asamNetworkPosition OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-write STATUS obsolete DESCRIPTION "Indicates whether the ASAM is a hub-ASAM (1) or a subtending ASAM. The default is hub-ASAM." ::= { asamSystemMIB 10 } -- -- Part 3: Object related with system migration. This object is obsolete. -- asamMigrationStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), migrating (2), rollBackPossible (3), forceRollBack (4), removeRollBackDatabase (5) } ACCESS read-write STATUS obsolete DESCRIPTION "The asamMigrationStatus object represent the ASAM's status for what concerns its migration capabilities. Whereas two of the six values, viz. 'forceRollBack' and 'removeRollBackDatabase' may be specified in a management protocol set operation, three values wil be returned in response to a management protocol retrieval operation: 'idle', 'migrating' and 'rollBackPossible'. That is, when queried, this object can represent only three migration related states of the ASAM: the ASAM has no specific migration state, i.e. it is simply operational (the object has value 'idle'); the ASAM is busy migrating (the object has value 'migrating'); or, the ASAM has recently migrated but is still able to rol back to the previous configuration (the object has value 'rollBackPossible'. Whenever a management station wishes the ASAM to roll back to its previous configuration it has to set this object to value 'forceRollBack'. Setting the object to value 'removeRollBackDatabase' informs the ASAM it has not support the rollback feature anymore. As a result the ASAM will perform clean up operations (e.g. free the roll back database). Remark: this object is subject to improvement in future releases (e.g. coupling of data and software upgrade/rollback)." ::= { asamSystemMigration 1 } -- -- Part 4: Another bunch of system objects. -- asamMibVersion OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..28)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies the version of the management interface of the ASAM, i.e. it uniquely identifies the complete set of MIBs that together constitute the management interface. The version is a string of the form dccdddddcccc_Vx.x.x.y.z, with d representing a decimal digit, c representing an uppercase character, and x, y, z representing a decimal number between 0 and 99. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { asamSystemMIB 13 } -- asamEthernetShapingRate OBJECT-TYPE -- SYNTAX INTEGER (128..2000) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Ethernet frame shaping rate in kbit/s. -- -- This object is only meaningful for a system with an Ethernet based -- management interface, which is always the case for the ISAM. -- In such a case, the system will shape the outgoing Ethernet frames -- on its management interface to the configured rate. -- -- ALCATEL NOTE: -- SUPPORT: YES INSRVMOD: YES RANGE: 128..2000 -- PERSIST: YES DEFVALUE: 128 UNITS: kbit/s" -- ::= { asamSystemMIB 14 } asamSystemInitProgress OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "Progress of the system initialization indicated as a percentage. When the system starts its initialization, it will at first not be reachable for SNMP managers. However, as soon as the initialization has progressed far enough, the system will allow Get requests from managers on this object. From then on, managers can poll the value of this variable to monitor the progress of the initialization. Get requests on other objects and all Set requests will still be refused by the system. When the progress has reached 100% (initialization complete), the system will allow all SNMP access. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..100 PERSIST: NO DEFVALUE: NA UNITS: percent" ::= { asamSystemMIB 15 } asamPnPEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable allows the manager to enable/disable the Plug-and-Play functionality. When enabled, the ASAM will, upon installation, start up autonomously without intervention of a local craftsman. Otherwise, a Craft Terminal is required to provide the necessary configuration to the ASAM so that it can start up and set up communication with the manager. ALCATEL NOTE: SUPPORT: NO INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: enabled (1) UNITS: -" ::= { asamSystemMIB 16 } -- -- Part 6: Objects related with license key management. -- asamLicenseNumberOfChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Wrap around counter for the number of changes of the licenseCounter object. The counter is incremented each time the licenseCounter is incremented for one of the features. Not persistent data. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: -" ::= { asamSystemLicenseMgmt 1 } asamSystemLicenseMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamSystemLicenseMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The license key management table." ::= { asamSystemLicenseMgmt 2 } asamSystemLicenseMgmtEntry OBJECT-TYPE SYNTAX AsamSystemLicenseMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the asamSystemLicenseMgmtTable." INDEX {licenseFeatureIndex} ::= {asamSystemLicenseMgmtTable 1} AsamSystemLicenseMgmtEntry ::= SEQUENCE { licenseFeatureIndex INTEGER, licenseCounter INTEGER } licenseFeatureIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS not-accessible STATUS mandatory DESCRIPTION " This object is used by the asamSystemLicenseMgmtTable to identify a row of this table. Each row corresponds to a system feature that is monitored to support license management at the manager. Following integer values are defined: 1. ADSL2+ 2. READSL2 3. IGMP 4. BVB 5. Annex-M 6. IP-Forwarding 7. PPPoX Relay 8. PPPoX Termination 9. 802.1x 10. SELT 11. reserved 12. reserved 13. IPOA-CC and IPOA-RB 14. UPBO Policing 15. XDSL-PerLine-Overrule 16. Impulse Noise Sensor 17. ADSL1/2 PSD Shaping 18. Annex-J 19. SyncE Clock source 20. 2.5 Gbps enabled LT 21. NT load sharing + redundancy 22. SHDSL cross-talk cancellation 23. SRA on VDSL2 24. ARQ 25. 10 Gbps enabled LT 26. 20 Gbps enabled LT 27. Gxr 28. IPv6 security 29. Lawful Intercept 30. Vectoring crosstalk 31. Green DSL L2 mode 32. Ethernet OAM Advanced Monitoring Functions 33. MPLS Advanced Resiliency 34. 40 Gpbs enabled LT 35. Type-B protection 36. Vectoring Legacy FEXT cancellation 37. Vlan Translation Table Extended Usage 38. Ethernet OAM Y1731 Performance Monitoring Functions 39. Vplus 40. GFast 41. VULA 42. Multi-vsg 43. Ethernet Ring Protection Switching ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..43 PERSIST: NO DEFVALUE: NA UNITS: -" ::= {asamSystemLicenseMgmtEntry 1} licenseCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the monitoring of the feature that corresponds to the licenseFeatureIndex value. 1. For ADSL2+, the counter indicates the number of XDSL lines for which an ADSL2+ operational mode (POTS and/or ISDN) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. 2. For READSL2, the counter indicates the number of XDSL lines for which a READSL2 operational mode (US mode 1 and/or US mode2) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped.. 3. For IGMP, the counter indicates the number of DSL subscriber lines for which an IGMP control channel has been configured. 4. For BVB, the counter indicates whether BVB is enabled (value 1) or Disabled (value 0) in the ASAM and in ISAM this item is reserved. 5. For xDSL Annex-M, the counter indicates the number of DSL subscriber line which is configured for Annex-M. 6. For IP-Forwarding, the counter indicates the number of DSL subscriber lines configured for Layer-3, such as IP forwarding, RFC1483R/Br with virtual routers, Layer-3 QoS features, IP anti-spoofing, IP filters. 7. For PPPoX Relay, the counter indicates the number of DSL subscriber lines for which PPP CrossConnect has been configured. 8. For PPPoX Termination, the counter indicates the number of DSL subscriber line for which PPPoE termination or PPPoA termination has been configured. 9. For 802.1x, the counter indicates the number of DSL subscriber lines for which 802.1x has been configured as 'enabled' 10. For SELT, the counter indicates the number of DSL subscriber lines configured for G.selt usage and enables the collection of line test data. 11. (reserved) 12. (reserved) 13. For IPoA-CC and IPoA-RB, the counter indicates the number of DSL subscriber lines which are configured for IPoA cross connect or IPoA with ehanced i-bridge mode. 14. For UPBO Policing, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which UPBO Policing pbo mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 15. For XDSL-Perline-Overrule, the counter indicates the number of XDSL lines for which the per-line overrule data has been used in its configuration and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 16. For Impulse Noise Sensor, the counter indicates the number of XDSL lines for which the Impulse Noise Sensor is enabled (insEnable set to 1 in the Line Conf Table) and for which the XDSL board is equipped. The counter is decremented if the XDSL line is unconfigured ( once the INS feature has been enabled, it cannot be disabled anymore unless the line is unconfigured ). 17. For ADSL1/2 PSD Shaping, the counter indicates the number of XDSL lines for which ADSL1 or ADSL2 opMode is enabled with DBPO shaping in its configuration. The counter is incremented when a XDSL line has its operating mode enabled for ADSL1 or ADSL2 and a DPBO profile is assigned to that line (DPBO board profile or a line profile) and the respective board is equipped and planned and supports ADSL1/2 PSD Shaping. The counter is decremented when the DPBO profile (DPBO board or line profile) of a xDSL line is unassigned or a xDSL line has its operating mode disabled for ADSL1 or ADSL2. 18. For xDSL Annex-J, the counter indicates the number of DSL subscriber line which is configured for Annex-J. 19. For syncE clock source, the counter indicates the number of Synchronous Ethernet ports are configured as a clock source. 20. For 2.5 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 2.5 Gbps speed. 21. When NT load sharing + redundancy is supported, the counter indicates 1, else the counter indicates 0. 22. For SHDSL CTC, the counter indicates actual the number of SHDSL subscriber lines for which cross-talk cancellation (CTC) is enabled and for which the SHDSL board is equipped. In current, this key isn't used, and the counter always keep as zero. 23. For SRA on VDSL2, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which SRA mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 24. For ARQ, the counter indicates the number of XDSL lines for which ARQ is enabled in the configuration, supported by the LT board and for which the XDSL board is equipped. 25. For 10 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 10 Gbps speed. 26. For 20 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 20 Gbps speed. 27. For Gxr, the counter indicates the number of lines that are enabled for resource control via Diameter Gxr interface. 28. For IPv6 security, the counter indicates the number of access lines (DSL, Ethernet or ONT UNI) where one or more IPv6 security features are activated. 29. For Higig NT, the counter indicates whether lawful intercept is enabled (value 1) or Disabled (value 0). 30. For Vectoring crosstalk, the counter indicates the number of XDSL lines on which a vectoring profile has been assigned to by configuration, supported by the LT board and for which the XDSL board is equipped. 31. For Green DSL L2 mode, the counter indicates the number of xDSL lines which are equipped and configured with L2 mode enabled. 32. For Ethernet OAM Advanced Monitoring Functions, the counter indicates the numberof MEPS which can send and/or receive CFM Continuity Check Messages. 33. For Higig NT, the counter indicates whether MPLS-FRR or MPLS LSR is being used (value 1) or not used (value 0).The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as MPLS-FRR and MPLS LSR are not supported. 34. For 40 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 40 Gbps speed. 35. For Type-B protection, the counter indicates the number of protection groups in the system that are configured by the operator. The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as protection group creation is not allowed. The value is between 0 (no protection group) and 62 (maximum allowed by the system). 36. For Vectoring Legacy FEXT Cancellation, the counter indicates the number of XDSL lines on which one of the Legacy FEXT Cancellation methods has been enabled by configuration, supported by the LT board and for which the XDSL board is equipped. 37. For Vlan Translation Table Extended Usage, the counter indicates the number of line cards making use of Vlan Translation Resources in an extended way. 38. For Ethernet OAM Y1731 Performance monitoring functions, the counter indicates the number of MEPs in the system in which Y1731 performance monitoring functions have been enabled. 39. For Vplus, the counter indicates the number of XDSL lines for which a vplus opmode has been selected by configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when this condition is not met anymore. 40. For GFast, the counter indicates the number of XDSL lines for which 41. For VULA, the counter indicates the number of FELT-B planned as uplink mode 42. For Multiple SG, the counter indicates the number of SIP terminations created in the local access node the G.fast operational mode is enabled by the configuration, supported by the LT board and for which the LT board is equipped. 43. For Ethernet Ring Protection Switching, the counter indicates whether Ethernet Ring Protection Switching is enabled (value 1) or Disabled (value 0). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: -" ::= {asamSystemLicenseMgmtEntry 2} systemMaxLtLinkSpeed OBJECT-TYPE SYNTAX INTEGER { onegbps(1), twodot5gbps (2), tengbps(10), twentygbps(20), fortygbps(40) } ACCESS read-write STATUS mandatory DESCRIPTION "An enum indicating high capacity is enabled. Applicable for high capacity NT's. This object is not applicable to ISAM 7367 SX / 7363 MX systems (Standalone Single-board Vectoring Box and NGVR). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 1,2,10,20 or 40 PERSIST: YES DEFVALUE: onegbps UNITS: NA" ::= { asamSystemLicenseMgmt 3 } --OID 18..21 are reserved for ASAM applications systemMac OBJECT-TYPE SYNTAX OCTET STRING(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "On ISAM FD with SHUB: Specifies MAC address of the LANX interface(100baseT) of the NT This field should/must only be modified when the shelf does not support the SMAS functionality. On ISAM 7367 SX/ 7363 MX systems (Standalone Single-board Vectoring Box and NGVR) this object is read only. It allows to get the MAC address of the system (e.g used for IP communication) ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { asamSysMacAdresses 1 } lanxBaseMac OBJECT-TYPE SYNTAX OCTET STRING(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the LANX MAC start adress. This field should/must only be modified when the shelf does not support the SMAS functionality. This object is not applicable to ISAM 7367 SX / 7363 MX systems (Standalone Single-board Vectoring Box and NGVR) SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { asamSysMacAdresses 2 } lanxRangeMac OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the range of MAC adresses on LANX. The LANX MAC address range is currently equal to 24(number of LANX interfaces). This field should/must only be modified when the shelf does not support the SMAS functionality. This object is not applicable to ISAM 7367 SX/ 7363 MX systems (Standalone Single-board Vectoring Box and NGVR) SUPPORT: YES INSRVMOD: NA RANGE: 0..65535 PERSIST: YES DEFVALUE: 24 UNITS: -" ::= { asamSysMacAdresses 3 } outbandManMac OBJECT-TYPE SYNTAX OCTET STRING(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies Outband Management MACAddress. This field should/must only be modified when the shelf does not support the SMAS functionality. This object is not applicable to ISAM 7367 SX/ 7363 MX systems (Standalone Single-board Vectoring Box and NGVR) SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { asamSysMacAdresses 4 } asamSuperuserAuthByRadius OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The TL1/CLI user ID SUPERUSER/isadmin is optionally authenticated by RADIUS based on this object. When disabled, SUPERUSER/isadmin is always authenticated by the local user database. When enabled, SUPERUSER/ isadminauthentication is initially attempted with RADIUS, but the authentication will fall back to the local TL1/CLI user database, if all RADIUS servers are disabled, or the RADIUS servers are not responding successfully to the authentication request. ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: 1..2 DEFVALUE: 2 UNITS: NA" DEFVAL { disabled } ::= { asamSystemMIB 20 } timeZoneOffset OBJECT-TYPE SYNTAX INTEGER (-780..840) ACCESS read-write STATUS mandatory DESCRIPTION "This object allows a manager to set the Time Zone Offset of the system. ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: -780...840 DEFVALUE: 0 UNITS: minutes" ::= { asamSystemMIB 24 } asamCraftLoginStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies whether user has been logged in or not 1-user logged in 0-no user logged in. SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -" ::= { asamCraftLogin 1 } asamPortNumberingMethodSystem OBJECT-TYPE SYNTAX INTEGER { logicalSlotId (1), positionBasedSlotId (2), typeBasedSlotId (3), legacyPositionBasedSlotId (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the Line ID format at the system level. logicalSlotId (1) is a numbering method defined for equipment identification in the MIB. positionBasedSlotId (2) numbers all boards from left to rightor from bottom to top starting from 1. typeBasedSlotId (3) numbers -per slot-type- as indicated on the shelf, in case there is no indication on the shelf it numbers -per slot-type- from left to right or from bottom to top starting with 1. legacyPositionBasedSlotId (4) is identical to position-based numbering except for aram-b/d where the numbering corresponds with the logicalSlotId based numbering plus 1. ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: see above DEFVALUE: 1 UNITS: NA" ::= { asamAccessLoopIdSyntax 1 } asamAccessLoopAtmBasedDslSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a loop id for ATM based DSL lines terminated by DSL LT. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamAccessLoopIdSyntax 3 } asamAccessLoopEthBasedDslSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a loop id for Ethernet based DSL lines terminated by DSL LT and for Ethernet lines terminated by Ethernet LT. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamAccessLoopIdSyntax 4 } asamAccessLoopEthBasedPonSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a loop id for Ethernet based DSL line terminated by GPON ONTs, and for Ethernet lines terminated by GPON ONTs. GPON ONTs are connected to the system via a GPON transmission technology. It is a string to define a specified format at the system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamAccessLoopIdSyntax 5 } asamAccessLoopEthBasedEPonSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a loop id for Ethernet based DSL line terminated by EPON ONTs, and for Ethernet lines terminated by EPON ONTs. EPON ONTs are connected to the system via an EPON transmission technology. It is a string to define a specified format at the system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamAccessLoopIdSyntax 6 } asamAccessLoopEthBasedNgpon2Syntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a loop id for Ethernet based DSL line terminated by NGPON2 ONTs, and for Ethernet lines terminated by NGPON2 ONTs. NGPON2 ONTs are connected to the system via a NGPON2 transmission technology. It is a string to define a specified format at the system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamAccessLoopIdSyntax 7 } asamAccessLoopNtPortSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a access loop id for NT ports. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamAccessLoopIdSyntax 8 } environmentMonitorRelayMode OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION " This variable allows the manager to enable/disable the environment monitoring relay functionality. When enabled, the environment data will be relayed between monitoring box and supervision server. Otherwise, it will stop the relay. ALCATEL NOTE: SUPPORT: NO INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: disable (2) UNITS: -" ::= {environmentMonitorRelay 1} swEtsiVersion OBJECT-TYPE -- SYNTAX DisplayString(SIZE(0..50)) -- Use no DisplayString instead of OCTET STRING SYNTAX OCTET STRING(SIZE(0..50)) ACCESS read-only STATUS mandatory DESCRIPTION " This object holds the Software version for ETSI market. (e.g. R4.1). It will be empty if not supported for ETSI market. To ease parsing by AMS, the format of this string is constrained as to be Rn.n*.n* where n is any integer value, and * is any string of ASCII character only containing alphabetic [a-zA-Z] characters combined with _ and -. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NA INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= {swVersion 1} swAnsiVersion OBJECT-TYPE -- SYNTAX DisplayString(SIZE(0..50)) -- Use no DisplayString instead of OCTET STRING SYNTAX OCTET STRING(SIZE(0..50)) ACCESS read-only STATUS mandatory DESCRIPTION " This object holds the Software version for ANSI market. (such as FGN4.1.0). It will be empty if not supported for ANSI market. To ease parsing by AMS, the format of this string is constrained as to be Rn.n*.n* where n is any integer value, and * is any string of ASCII character only containing alphabetic [a-zA-Z] characters combined with _ and -. Examples: R4.5.02c, R4.8b, R04.07.10 ... ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NA INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= {swVersion 2} cpuLoadTable OBJECT-TYPE SYNTAX SEQUENCE OF CpuLoadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CPU load monitor table. ALCATEL NOTE: TABLESIZE: max nmbr of slots " ::= { systemMonitor 1 } asamRelayAtmBasedDslSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a relay id for Atm based DSL lines terminated by DSL LT. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamRelayIdSyntax 1 } asamRelayEthBasedDslSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a relay id for Ethernet based DSL lines terminated by DSL LT and for Ethernet lines terminated by Ethernet LT. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamRelayIdSyntax 2 } asamRelayNtPortSyntax OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines the syntax for generating a relay id for NT ports. It is a string to define a specified format at system level. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: UNITS: -" ::= { asamRelayIdSyntax 3 } cpuLoadEntry OBJECT-TYPE SYNTAX CpuLoadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the cpuLoadTable. The index of the entry is slotId. An entry represents the CPU load of the board in the slot. The CPU load includes detail value and average value respectively. The slot can be NT slot or LT slot. Row creation : An entry is created by the system when a board is planning Row deletion : An entry is deleted by the system when a board is unplanning. Index usage : the index is the slot id. Note that entries will be presented to the SNMP manager in full lexicographical order." INDEX { slotId } ::= { cpuLoadTable 1} CpuLoadEntry ::= SEQUENCE { slotId INTEGER (1..65535), startMonitorTime NetworkTimeInSeconds, cpuLoadDetail OCTET STRING(SIZE(180)), cpuLoadAverage Gauge, operateStatus INTEGER } slotId OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " the slotId has the same value as eqptSlotId of ASAM-EQUIP-MIB. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPARSE: NO DESCR: NA" ::= { cpuLoadEntry 1} startMonitorTime OBJECT-TYPE SYNTAX NetworkTimeInSeconds ACCESS read-only STATUS mandatory DESCRIPTION "The start timestamp of CPU load monitor is the network time in seconds. It indicates the start time of last 3 minutes or less monitoring. The startMonitorTime is the time at which the last CPU load detail & average was computed - reset every second after 3 minutes from monitor start time. The startMonitorTime is the monitor task start time if the interval time between start and stop is less than 3 minutes. The startMonitorTime is (stop monitor task time - 3 minutes) if the interval time between start and stop is larger than 3 minutes. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPARSE: NO DESCR: NA" ::= { cpuLoadEntry 2} cpuLoadDetail OBJECT-TYPE SYNTAX OCTET STRING(SIZE(180)) ACCESS read-only STATUS mandatory DESCRIPTION " The cpuLoadDetail object represents the CPU load percent value (x100%) in detail for 180 measurement points. The length of this object is always 180 octets. One octet represents one CPU load value of one measurement. One measurement generates one sample value. The measure time of a sample is a second. The maximum measure time is 180 seconds. So the maximum number of samples is 180. The interval time between start and stop (or show) operation may be less 180 seconds. So the sample number may be less than 180. The left octet will be padded with H'FF if the sample number is less than 180 and keeps the octet length always 180. The type of cpuLoadDetail variable is OCTET STRING. Each octet can be intepreted as a double-digit (binary ecoded value) integer. The cpuLoadDetail indicates 180 double-digit (binary value) integers. Each integer indicates the CPU load percent value of a measurement. The order of measurement value is: In case of the measurement time is >= 180 seconds, only the last 180 samples are keeped; the 1st octet is the 1st measurement value of the last 180 sample; the 2nd octet is the 2nd measurement value of the last 180 sample; the 180th octet is the 180th measurement value of the last 180 sample. A wrap around buffer will be used to store the measurement values. In case of the measurement time is < 180 seconds, the samples are less than 180, the 1st octet is the measurement value of 1st sample; the 2nd octet is the measurement value of 2nd sample; the left octet will be padded with H'FF; so the 180th octet is H'FF. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: 'FFh' UNITS: NA SPARSE: NO DESCR: NA" ::= { cpuLoadEntry 3} cpuLoadAverage OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The average value of CPU load. It is percent value (x100%). It is the average of detail CPU load value. One sample is generated for each second during CPU load measurement time. The maximum measurement time is 180 seconds. The maximum sample number is 180. cpuLoadAverage is average of all 180 sample values if the monitoring time is equal or longer than 180 seconds. It should be the average of sample values measured in the time between start monitor and stop monitor if the interval time between start and stop is less than 180 seconds. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..100 DEFVALUE: 0 UNITS: percentage SPARSE: NO DESCR: NA" ::= { cpuLoadEntry 4} operateStatus OBJECT-TYPE SYNTAX INTEGER{ start(1), stop(2), proceeding(3), idle(4), not-operational(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The operate status for start/stop CPU load monitoring operation. The maximum measurement time is 180 seconds. One sample is generated for a second. The maximum sample number is 180. Only the latest 180 sample values are kept. The previous value beyond 180 is overwritten. The operator should start monitor firstly, then show the CPU load and stop monitor. The and are for operation (action). The , , and indicate the states of the monitor. =================== =============== | not-operational | --- board planning ===> | idle | =================== =============== =================== =============== | idle | --- start monitor ===> | proceeding | =================== =============== =================== =============== | proceeding | --- stop monitor ===> | idle | =================== =============== =================== ================== | idle,proceeding | --- board unplanning ===> |not-operational | =================== ================== ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: YES RANGE: NA DEFVALUE: idle UNITS: NA SPARSE: NO DESCR: NA" ::= { cpuLoadEntry 5} memUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF MemUsageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The memory usage monitor table." ::= { systemMonitor 2 } memUsageEntry OBJECT-TYPE SYNTAX MemUsageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the memUsageTable. The index of the entry is slotId. An entry represents the memory usage of the board in the slot. The memory usage includes total size and used size respectively. The solt can be NT slot or LT slot." INDEX { slotId } ::= { memUsageTable 1} MemUsageEntry ::= SEQUENCE { totalMemSize Gauge, memAbsoluteUsage Gauge } totalMemSize OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total memory size on board. It just indicates the size of total semi and dynamical memory. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: Mbyte" ::= { memUsageEntry 1} memAbsoluteUsage OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The used memory size in absolute value. It indicates total used size of semi and dynamical memory. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: Mbyte" ::= { memUsageEntry 2} -- OID 30..32 are reserved for other applications. -- (7342 FTTU, 7354 FTTB, LiteSpan ANIT-A) asamSystemAccessOperatorID OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Access Operator ID is a unique identifier representing an operator. This identifier is randomly generated by ALU, then assigned to an operator. The identifier is configured at the operator's premises. A value of ZERO signifies that an access operator ID has not been configured. Decimal values 1 to 15 are reserved for future use. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES RANGE: 0..65535 DEFVALUE: 0 UNITS: NA SPARSE: NA DESCR: NA" ::= { asamSystemMIB 33 } asamSystemActivatedCDE OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The Activated CDE is a bitmap listing the CDE features that are active. CDE features are activated during system startup only, and are based on the configured Access Operator ID. This field can display upto 32 bits (big endian) Following list specifies which CDE feature is defined for each bit: 1 NASPortIDWithTwoDigits 2 VRRPProxyForEiBridge 3 MgntVLANpbit6 4 IgmpAntiSpoofingDisabled 5 TL1UdpModifiedBehaviour 6 vMACPortIdFromLine 7 IsdnBATextBasedIID 8 MCTransparencyForiBridge 9 ActivateStdConfForIhubNT 10 TransactionManagement 11 MACAddressMobility 12 UniversalSFP 13 ShdslCTC 14 UpLoopAttenuationOffset 15 L2DslLtSwARPRelay 16 MigrationNVLTDtoNDLTGAllowed 17 pre-R35PPPQoSHandling 18 XdslAutoswitchSupported 19 IsSFPReassignmentAllowed 20 IsVMACLogicalSlotidSupported 21 ShdslParametersNotReportedWhenPairCut 22 DualXfpAllowedNCNCH 23 GPONRemoteDSTagsTreatment 24 XdslDefaultProfileModelTR165 25 IsIpv6LightLlaIpantispoofingSupport 26 MultipleExternalSFTPServers 27 IsdnBaPermanentL2Agw 28 EmopOnuMulticastProvision 29 IsCodetelLegacyModeSupport 30 IsRtpDelayInMsecSupported 31 TL1pre-R4010Behaviour 32 DSPSyncDelaySupported ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NA INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamSystemMIB 34 } asamSystemPortAddressingMode OBJECT-TYPE SYNTAX INTEGER { sequential (1), slotBased (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows the manager to configure the faceplate port addressing mode used by operators in CLI and TL1. With the mode set to , the operator must specify the port as a sequential number that span the various cards in the system. With the mode set to , the operator must specify the ports as a combination of card type, rack/slot, port type and faceplate port number. In the current release this object is still read only, in future releases the default mode for legacy ports and systems can be changed to . New systems with non-legacy ports (overlapping port numbers, XFPs), this object is set to and cannot be changed. The default for this object is on legacy systems and on new systems. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: see above UNITS: -" ::= { asamSystemMIB 35 } peripheralMgntMacFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF PeripheralMgntMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The peripheral management mac filter table. For enhanced security in remote cabinets, it is possible to restrict allowed destination MAC addresses in upstream Ethernet traffic on the peripheral port to a white-list of 20 allowed MAC address ranges. Each entry of this list consists of an Original manufacturer Unique Identifier (OUI) value, covering the 3 Most Significant Bytes (MSB) of the public MAC address. A begin and end value of a single consecutive range of MAC addresses for the above OUI covers at maximum the full 3 Least Significant Bytes (LSB) of the public MAC address. ALCATEL NOTE: TABLESIZE: 20 DESCR: NA" ::= { asamSystemMIB 36 } peripheralMgntMacFilterEntry OBJECT-TYPE SYNTAX PeripheralMgntMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A filter entry in the management mac filter table. On the NRCD-B the filter is a filter on the destination mac address of the frames received over this port. On other cards/systems, the filter is a filter on the source mac address of the frames received over this port. Unused filter entries have a start and end MAC address of 00.00.00.00.00.00, which is the default. A special filter entry 7F.FF.FF.00.00.00 - 7F.FF.FF.FF.FF.FF is provided to always match with any mac address. Adding this entry therefore disables the MAC filter. Both MAC addresses in a single filter entry always have the same OUI. " INDEX { peripheralMgntMacFilterIndex } ::= { peripheralMgntMacFilterTable 1} PeripheralMgntMacFilterEntry ::= SEQUENCE { peripheralMgntMacFilterIndex INTEGER (1..20), peripheralMgntMacFilterMacRangeFirst MacAddress, peripheralMgntMacFilterMacRangeLast MacAddress } peripheralMgntMacFilterIndex OBJECT-TYPE SYNTAX INTEGER (1..20) ACCESS not-accessible STATUS mandatory DESCRIPTION "The index for the peripheralMgntMacFilter table. A maximum of 20 mac filters is supported. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: NA" ::= { peripheralMgntMacFilterEntry 1} peripheralMgntMacFilterMacRangeFirst OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the first MAC address of the allowed range. Default value 00.00.00.00.00.00 ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { peripheralMgntMacFilterEntry 2 } peripheralMgntMacFilterMacRangeLast OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the last MAC address of the allowed range. At least the OUI part should match the OUI of the peripheralMgntMacFilterMacRangeFirst MAC address. Default value 00.00.00.00.00.00 ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -" ::= { peripheralMgntMacFilterEntry 3 } asamLiSeparate OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION " Parameter used to create a separate LI management plane; i.e to restrict creation/modification of operators that can access lawful intercept data. This object is not applicable to ISAM 7367 SX / 7363 MX systems (Standalone Single-board Vectoring Box and NGVR). 'disabled': CLI user with security privileges can: -set li-user,li-admin user privileges -create a LI view -attach a LI view to a usergroup -modify a LI view SNMP user with view on USM,VACM MIB's can: -create a LI view -attach a LI view to a usergroup -modify a LI view 'enabled': CLI user with security and li-admin user privilege can: -set li-user,li-admin user privileges -create a LI view -attach a LI view to a usergroup -modify a LI view SNMP user with view on USM,VACM and IHUB LI ADMIN MIB's can: -create a LI view -attach a LI view to a usergroup -modify a LI view Notes: LI view= view with access on IHUB LI MIB and/or IHUB LI ADMIN MIB Before setting this value to enabled make sure that: - a CLI user exist with li-admin privilege. - a SNMP user exist with access to IHUB LI ADMIN MIB ALCATEL NOTE: Applicable to higig NTs SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: disabled UNITS: NA " DEFVAL { disabled } ::= { asamSystemMIB 37 } asamSystemALSState OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter used to enable / disable ALS (Automatic Laser Shutdown) system wide. ALS enable / disable will be applied only for NT & NTIO xFPs. 'disabled': System wide ALS is disabled 'enabled': System wide ALS is enabled Notes: Applicable to xFP type : Optical only NTs : NANT-D, FANT-F xFPs NTIOs : NCNC-B/C/D/E/F/H xFPs ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: NA PERSIST: YES DEFVALUE: enabled UNITS: NA " DEFVAL { enabled } ::= { asamSystemMIB 41 } asamSystemCustomerId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "A textual string identifying the customer assigned in system level. Default value is 'available', which means system customer id is not configured. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: NA PERSIST: YES DEFVALUE: available UNITS: -" ::= { asamSystemMIB 43 } asamSystemAutoSwitchAtmPtm OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the manager to enable or disable an Auto-Switching between ATMoADSLx and PTMoVDSLx at system wide. The supported values are, 1 (enable) - enables auto-switching between ATM and PTM at system wide. 2 (disable) - disables auto-switching between ATM and PTM at system wide. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: NA PERSIST: YES DEFVALUE: disable UNITS: NA " DEFVAL { disable } ::= { asamSystemMIB 44 } asamSystemAutoSwitchVdslStepUpDelay OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the manager to set delay time (in seconds) for auto-switch stepup to VDSL service. The auto-switch step-up request for VDSL service will be considered for the xdsl line failure (LOS/LPR) which received after this delay time from the time of fallback to ATMoADSLx service. The supported values are 0 to 65535. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 0..65535 PERSIST: YES DEFVALUE: 3600 UNITS: seconds " DEFVAL { 3600 } ::= { asamSystemMIB 45 } asamSystemUplinkMode OBJECT-TYPE SYNTAX INTEGER { auto (1), ptp (2), gpon (3), bonded (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter used to configure uplink mode. Notes: After changing uplink-mode, new value only takes effect after system reboot. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: NA PERSIST: YES DEFVALUE: auto UNITS: NA " DEFVAL { auto } ::= { asamSystemMIB 46 } asamSystemCurrentUplinkMode OBJECT-TYPE SYNTAX INTEGER { ptp (1), gpon (2), bonded (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Parameter used to current uplink mode. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA " ::= { asamSystemMIB 47 } asamSystemVoiceOswp OBJECT-TYPE SYNTAX INTEGER { novoice (0), h248 (1), sip (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The voice software when system startup. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 0..2 PERSIST: YES DEFVALUE: sip(2) UNITS: -" DEFVAL { sip } ::= { asamSystemMIB 48 } asamSystemActivatedCDEExtended OBJECT-TYPE SYNTAX OCTET STRING(SIZE(32)) ACCESS read-only STATUS mandatory DESCRIPTION "The Activated CDE is a bitmap listing the CDE features that are active. CDE features are activated during system startup only, and are based on the configured Access Operator ID. This field can display upto 256 bits (big endian) Following list specifies which CDE feature is defined for each bit: 1 NASPortIDWithTwoDigits 2 VRRPProxyForEiBridge 3 MgntVLANpbit6 4 IgmpAntiSpoofingDisabled 5 TL1UdpModifiedBehaviour 6 vMACPortIdFromLine 7 IsdnBATextBasedIID 8 MCTransparencyForiBridge 9 ActivateStdConfForIhubNT 10 TransactionManagement 11 MACAddressMobility 12 UniversalSFP 13 ShdslCTC 14 UpLoopAttenuationOffset 15 L2DslLtSwARPRelay 16 MigrationNVLTDtoNDLTGAllowed 17 pre-R35PPPQoSHandling 18 XdslAutoswitchSupported 19 IsSFPReassignmentAllowed 20 IsVMACLogicalSlotidSupported 21 ShdslParametersNotReportedWhenPairCut 22 DualXfpAllowedNCNCH 23 GPONRemoteDSTagsTreatment 24 XdslDefaultProfileModelTR165 25 IsIpv6LightLlaIpantispoofingSupport 26 MultipleExternalSFTPServers 27 IsdnBaPermanentL2Agw 28 EmopOnuMulticastProvision 29 IsCodetelLegacyModeSupport 30 IsRtpDelayInMsecSupported 31 TL1pre-R4010Behaviour 32 DSPSyncDelaySupported 33 DhcpOption82Transparent 34 AutomaticPMCollection 35 LineIdDisplayPANIHeader 36 ANCP-RFC6320CompliantentProtocolSupported 37 CVlanPBitBasedSchedulingDS 38 IsLineShaperEnabled 39 CVLANRangeBasedCtrlProtocolAwareness 40 FourQueuesUpstreamCatan 41 CMCCInteroperabilityNPBridgeFiltering 42 IsPTMLineShaperDisabled 43 PopulateDHCPOption82.2InHex 44 L3Multicast 45 IGMPMarkPriorityBitToValue6 46 ItfSubnetScale32 47 IsAutoPortResetSupported 48 ReducedDsObcPolicer 49 EponUniDimensionScaleup 50 EontPerformanceMonitorOptimization 51 EponQuickPonCutover 52 PppDhcpTlv90Tlv91OptionAdd 53 SwPoliceNdMldProtoAt100Pps 54 IsPPPOEDownstreamRelayEnabled 55 UseSpecificHoldOffTime 56 HguTr069Configuration 57 MaskParityError 58 DisableSfpAlcatelStringCheckPtpLt 59 IsQosMarkerProfInnerPbitSupported 60 QosBandwidtProfileConfigOnUni 61 QosQueuesAggrConfigSupport 62 ModifyNbrOfPortsOnOntCardAllowed 63 LtBootPriority 64 NetworkItfMtuDefault 65 RemovePasswordSpecialCharReq 66 CpuFilterPortRange 67 ReducedPresenceIndicationTimeout 68 LldpSubtypeInterfaceName 69 MigrationRDLTCtoRDLTDAllowed 70 MigrationNDLTFtoNDLTJAllowed 71 MigrationNDLTGtoNDLTKAllowed 72 IsStunnelMipSupported 73 SupportRemoteShelfOnLtPort 74 RemoveDhcpSessionIfPortAdminDown 75 VvplsUnknownMcDrop 76 GponIsSupportingRunTimeSetMcPbit 77 ArpPollingAndSnooping 78 CablePairIdentificationEnhancement 79 ArpRemoteIdCheckDisable 80 VplusVectLowspectrumOnlySupported 81 IsMegacoLawfulInterceptSupported 82 MiiUniversalBbServSupport 83 SupportNotTodOntClockSync 84 EfmOamOrgSpecOlidSupport 85 DtagAlarmsForClockDefects 86 MigrationNDLTCtoNDLTKAllowed 87 IsSipSelfRingingSupported 88 PmCdrCount5Min 89 FwWatchdogFeatureForL2PlusLt 90 LimitedTL1ForXGSPON 91 IsAttAricentOntSupported 92 IsSipQuickLinetestSupported 93 IsMegacoQuickLinetestSupported 94 SupportIgmpRowidSyncByMibReset 95 OnuProvisioningBasedOnOnuType 96 IfNameIncludesAidInfo 97 CrossVlanPolicerSharing 98 StunnelCvlanPbitRemark 99 MaxMacPerUplinkMx 100 OperatorSpecificTrapsSupported 101 DhcpTransparency 105 DropStandbyLinkTraffic ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NA INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamSystemMIB 49 } asamSuperuserAuthByTacacsPlus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The TL1/CLI user ID SUPERUSER/isadmin is optionally authenticated by Tacacs+ based protocol on this object. When disabled, SUPERUSER/isadmin is always authenticated by the local user database. When enabled, SUPERUSER/isadmin authentication is initially attempted with Tacacs+,but the authentication will fall back to the local TL1/CLI user database, if all Tacacs+ servers are disabled, or the Tacacs+ servers are not responding successfully to the authentication request. Note that Tacacs+ is applicable only for CLI user from R5.2 onwards. ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: 1..2 DEFVALUE: 2 UNITS: NA" DEFVAL { disabled } ::= { asamSystemMIB 50 } asamExternalLedsStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This MIB object is used to administratively turn off LEDs which are visible from the outside on some equipment practices like sealed remotes. By default, LEDs are enabled which means they are working normally and represent the actual status of the concerned item. If LEDs are disabled, they won't show any light even though an error status should be reported. This MIB object is only supported on some equipment practices. If not supported this MIB object will return enabled when read. ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: 1..2 DEFVALUE: 1 UNITS: NA" DEFVAL { enabled } ::= { asamSystemMIB 51 } asamSystemMirrorVoice OBJECT-TYPE SYNTAX INTEGER { disabled(1), ingress(2), egress(3), both(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable voice mirror of ingress/egress/both voice packets. Default value is Disabled ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: 1..4 DEFVALUE: 1[disabled] UNITS: NA SPARSE: NA DESCR: NA" DEFVAL { disabled } ::= { asamSystemMIB 52 } -- ================================================================== -- | START TECH SUPPORT OBJECTS | -- ================================================================== techSupport OBJECT IDENTIFIER ::= { asamSystemMIB 53 } asamTechSupportEnableDisable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable the techSupport functionality This attribute is only available on equipment practices that support this feature. When not supported noSuchName will be returned. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: NO DEFVALUE: enabled (2) UNITS: NA" DEFVAL { enabled } ::= { techSupport 1 } TechSupportSessionId ::= INTEGER (0..65535) TechSupportSessionType ::= INTEGER { crashLog(1), boardOnDemand(2), ifIndexOnDemand(3) } asamTechSupportPurgeFiles OBJECT-TYPE SYNTAX INTEGER { noAction(1), purge (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is a button-like object and is used to clear all collected TechSupport files. Next to the Tech Support files related to board crashes, also all on-demand files wil be removed. Setting this object with value noAction will be accepted but has no effect. Value noAction will be returned when read. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: 1 UNITS: NA" DEFVAL { noAction } ::= { techSupport 2 } asamTechSupportOnDemandFreeSessionId OBJECT-TYPE SYNTAX TechSupportSessionId ACCESS read-only STATUS mandatory DESCRIPTION "This object provides a free session id that can be used for launching an on demand Tech Support file session via asamTechSupportActionTable ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..65535 PERSIST: NO DEFVALUE: NA UNITS: NA" ::= { techSupport 3 } asamTechSupportActionTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamTechSupportActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The TechSupport Action Table Use this table to launch On Demand Tech Support File generation" ::= { techSupport 4 } asamTechSupportActionEntry OBJECT-TYPE SYNTAX AsamTechSupportActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the asamTechSupportSessionTable." INDEX { asamTechSupportActionId} ::= {asamTechSupportActionTable 1} AsamTechSupportActionEntry ::= SEQUENCE { asamTechSupportActionId INTEGER, asamTechSupportActionEvent INTEGER, asamTechSupportActionSessionId TechSupportSessionId, asamTechSupportActionType TechSupportSessionType, asamTechSupportActionObject INTEGER, asamTechSupportActionServerIP IpAddress, asamTechSupportActionFile OCTET STRING(SIZE(1..255)) } asamTechSupportActionId OBJECT-TYPE SYNTAX INTEGER (1..1) ACCESS read-write STATUS mandatory DESCRIPTION "The index of the Tech Support Action Table Session Entry with id 1 exists and is to be used for creating new tech support on demand requets. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 0..65535 PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportActionEntry 1} asamTechSupportActionEvent OBJECT-TYPE SYNTAX INTEGER { generate (1), clear (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicate which action to trigger. The Following scenarios are possible: - Generate an On Demand TS File A set with the below fields specified will generate an on-demand Tech Support file generation for a dedicated board. It will result in the creation of a row in the asamTechSupportSessionTable by which the progress of the generation can be followed. When the Session goes into done state, then the corresponding file can be retrieved from /pub/TS/ONDEMAND The Mandatory fields to be set in one PDU are asamTechSupportActionEvent : MUST be generate (1) asamTechSupportActionType : MUST be boardOnDemand (2) asamTechSupportActionObject : Equipment Slot ID asamTechSupportActionFile : filename to write In case a dedicated SessionId is wanted, it can be set via the following optional field: asamTechSupportActionSessionId : requested session id asamTechSupportActionServerIP is also an optional fields which if set should be fixed to value 0 - Clear an On Demand TS File A set with the below fields will results in the removal of the entry from the asamTechSupportSessionTable and the corresponding file from disk. The Mandatory fields to e set in 1 PDU are asamTechSupportActionEvent : MUST be clear(2) asamTechSupportActionSessionId : SessionId to remove ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: 1 UNITS: NA" DEFVAL { generate } ::= { asamTechSupportActionEntry 2 } asamTechSupportActionSessionId OBJECT-TYPE SYNTAX TechSupportSessionId ACCESS read-write STATUS mandatory DESCRIPTION "Specify this value in case a dedicated session ID is to be used for this request. To find a good unique session-id, a read can be done to asamTechSupportOnDemandFreeSessionId. If a value of 0 is given, then the system will automatically select a session Id. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 0..65535 PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportActionEntry 3} asamTechSupportActionType OBJECT-TYPE SYNTAX TechSupportSessionType ACCESS read-write STATUS mandatory DESCRIPTION "The type corresponding to the stored or requested Tech Support File. - crashLog : type for auto generated crashlog TS files for boards - boardOnDemand : type for requesting an on-demand TS file for boards - ifIndexOnDemand : type for requesting an on-demand TS file for a specific ifIndex Currently only boardOnDemand is supported. The other values will be rejected. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 2 or 3 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { asamTechSupportActionEntry 4 } asamTechSupportActionObject OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifier that indicates for which object that the Tech Support File was generated or requested. For a boardOnDemand(2) request, the asamTechSupportSessionObject needs to be set to the Equipment Slot Id of the board for which the Tech Support file is to be generated. For a ifIndexOnDemand(3) request, the asamTechSupportSessionObject needs to be set to the if-index corresponding to the PON or ONT. Currently only boardOnDemand(2) requests are supported, hence the value for this field needs to be populated with the Equipment Slot Id. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportActionEntry 5} asamTechSupportActionServerIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the server where the Tech Support File will be uploaded to. or 0.0.0.0 in case the file needs to be stored locally on the node. Currently only a value of 0 is accepted as input. This field is an optional field, but if specified, then it must be set to 0. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportActionEntry 6} asamTechSupportActionFile OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The filename that identifies the Tech Support File. 2 restrictions apply - For storing locally on the Node identified via asamTechSupportActionServerIP = 0 size of asamTechSupportActionFile is max 13 characters structure : filename (only ._- allowed as special characters) - For storing on a remote server server is identified via asamTechSupportActionServerIP = a.b.c.d allowed length of asamTechSupportActionFile is max 255 chars structure : path/filename ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportActionEntry 7} asamTechSupportSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamTechSupportSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The TechSupport Session Table" ::= { techSupport 5 } asamTechSupportSessionEntry OBJECT-TYPE SYNTAX AsamTechSupportSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the asamTechSupportSessionTable." INDEX { asamTechSupportSessionId} ::= {asamTechSupportSessionTable 1} AsamTechSupportSessionEntry ::= SEQUENCE { asamTechSupportSessionId TechSupportSessionId, asamTechSupportSessionType TechSupportSessionType, asamTechSupportSessionObject INTEGER, asamTechSupportSessionServerIP IpAddress, asamTechSupportSessionFile OCTET STRING(SIZE(1..255)), asamTechSupportSessionStatus INTEGER, asamTechSupportSessionError INTEGER, asamTechSupportSessionSize INTEGER, asamTechSupportSessionTime NetworkTimeInSeconds } asamTechSupportSessionId OBJECT-TYPE SYNTAX TechSupportSessionId ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value to identify a Tech Support Session ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 0..65535 PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 1} asamTechSupportSessionType OBJECT-TYPE SYNTAX TechSupportSessionType ACCESS read-only STATUS mandatory DESCRIPTION "The type corresponding to the stored or requested Tech Support File. - crashLog : type for auto generated crashlog TS files for boards - boardOnDemand : type for requesting an on-demand TS file for boards - ifIndexOnDemand : type for requesting an on-demand TS file for a specific ifIndex ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 1,2 or 3 PERSIST: YES DEFVALUE: NA UNITS: -" ::= { asamTechSupportSessionEntry 2 } asamTechSupportSessionObject OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier that indicates for which object that the Tech Support File was generated or requested. 2 cases exist: - asamTechSupportSessionObject = slotId for asamTechSupportSessionType crashLog or boardOnDemand - asamTechSupportSessionObject = ifIndex for asamTechSupportSessionType ifIndexOnDemand ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 3} asamTechSupportSessionServerIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the server where the Tech Support File will be uploaded to. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 4} asamTechSupportSessionFile OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The filename that identifies the Tech Support File. format - filename [max 13 characters] - fileserver:path/filename [ max 255 chars] ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 5} asamTechSupportSessionStatus OBJECT-TYPE SYNTAX INTEGER { busy(1), failed(2), done(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the status for a session-entry. The initial status is busy(1). When the generation completes successfully, then it goes to done(3). In case of an error, then it goes to failed(2) state and the failure reason can be found by reading the asamTechSupportSessionError field. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 6} asamTechSupportSessionError OBJECT-TYPE SYNTAX INTEGER { no-error(1), conv-error(2), send-ping(3), ts-not-avail(4), inv-ping-resp(5), send-gen(6), gen-timeout(7), inv-gen-resp(8), send-info(9), info-timeout(10), inv-info-resp(11), request-data(12), data-timeout(13), inv-data-resp(14), res-acquiring(15), res-acq-timeout(16), incomplete(17), res-not-avai(18), disk-file-error(19), encrytion-error(20) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows error information for a failed session-entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 7} asamTechSupportSessionSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object shows the size of the collected TS file ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 8} asamTechSupportSessionTime OBJECT-TYPE SYNTAX NetworkTimeInSeconds ACCESS read-only STATUS mandatory DESCRIPTION "Shows the Time in seconds from 1900 when the TS-entry was collected. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: -" ::= {asamTechSupportSessionEntry 9} -- ================================================================== -- | END TECH SUPPORT OBJECTS | -- ================================================================== asamSystemScalingMode OBJECT-TYPE SYNTAX INTEGER { l2plus(1), l3plusHost(2), l3plusLPM(3) } ACCESS read-write STATUS mandatory DESCRIPTION "An enum indicating configured scaling mode of BroadCom switch. Applicable for FX next generation NT(FANT-G). l2plus-Mode with L2 FDB table having higher scaling of 256K with l3 scaling as in legacy FANT-F ( L3 host -16K + L3 LPM- 16K) l3plusHost-Mode with L3 host/ARP table having higher scaling of 16K -IPv4 + 32K - IPv6 + 4K -IPMC with L2 FDB - 96K & L3 LPM -16K as in legacy FANT-F l3plusLPM-Mode with L3 LPM/route table having higher scaling of 16K - IPv4 + 24K - IPv6 with L2 FDB - 32K & L3 host as in l3plus_host mode This object is not applicable to ISAM 7367 SX/ 7363 MX systems (Standalone Single-board Vectoring Box and NGVR). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 1..3 PERSIST: YES DEFVALUE: 1 UNITS: NA" ::= { asamSystemMIB 54 } asamSystemOperationalScalingMode OBJECT-TYPE SYNTAX INTEGER { l2plus(1), l3plusHost(2), l3plusLPM(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An enum indicating operational scaling mode of BroadCom switch. Applicable for FX next generation NT(FANT-G). l2plus-Mode with L2 FDB table having higher scaling of 256K with l3 scaling as in legacy FANT-F ( L3 host -16K + L3 LPM- 16K) l3plusHost-Mode with L3 host/ARP table having higher scaling of 16K -IPv4 + 32K - IPv6 + 4K -IPMC with L2 FDB - 96K & L3 LPM -16K as in legacy FANT-F l3plusLPM-Mode with L3 LPM/route table having higher scaling of 16K - IPv4 + 24K - IPv6 with L2 FDB - 32K & L3 host as in l3plus_host mode This object is not applicable to ISAM 7367 SX/ 7363 MX systems (Standalone Single-board Vectoring Box and NGVR). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 1..3 PERSIST: NO DEFVALUE: 1 UNITS: NA" ::= { asamSystemMIB 55 } asamSystemZTPState OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable/disable the ZTP (Zero Touch Provision) functionality This attribute is only available on equipment practices that support this feature. If not supported this MIB object will return disabled when read. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: NA PERSIST: YES DEFVALUE: disabled (1) UNITS: NA " DEFVAL { disabled } ::= { asamSystemMIB 56 } asamSystemRFOverlayModule OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This MIB object is used to enable or disable the RF Overlay Module (SX-8F and SX-16F only). This MIB object is only supported on some equipment practices. If not supported this MIB object will return disabled when read. ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: 1..2 DEFVALUE: 1 UNITS: NA " DEFVAL { disabled } ::= { asamSystemMIB 57 } asamSystemArpPollingInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of the object asamSystemArpPollingInterval specifies ARP polling interval. The range of the value is from 120s to 1096s.The default polling interval is 120s. ALCATEL NOTE: ACCESS: RW USAGE: MAND PERSIST: YES INSRVMOD: NO RANGE: 120..1096 DEFVALUE: 120 UNITS: NA SPARSE: NA DESCR: NA " DEFVAL { 120 } ::= { asamSystemMIB 59 } asamUplinkOutbandMgntIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This MIB object is used to save uplink based out-band manangement IP. This MIB object is only supported on 7363 MX and 7367 8F/16F/48U SX (Spumante based IWF). ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: YES RANGE: NA DEFVALUE: 0.0.0.0 UNITS: NA " DEFVAL { 120 } ::= { asamSystemMIB 60 } asamUplinkOutbandMgntNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This MIB object is used to save uplink based out-band manangement IP's netmask. This MIB object is only supported on 7363 MX and 7367 8F/16F/48U SX (Spumante based IWF). ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: YES RANGE: NA DEFVALUE: 0.0.0.0 UNITS: NA " ::= { asamSystemMIB 61 } asamDstRecurringConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamDstRecurringConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The asamDstRecurringConfTable has an entry for each daylight saving time zone information with the specified week and weekday repeatedly. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA" ::= { asamSystemMIB 62 } asamDstRecurringConfEntry OBJECT-TYPE SYNTAX AsamDstRecurringConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row entry contains information about a daylight saving time zone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA" INDEX {asamDstRecurringZoneIndex} ::= { asamDstRecurringConfTable 1 } AsamDstRecurringConfEntry ::= SEQUENCE { asamDstRecurringZoneIndex INTEGER, asamDstConfStartWeekDay INTEGER, asamDstConfStartWeek INTEGER, asamDstConfStartMonth INTEGER, asamDstConfStartHour INTEGER, asamDstConfStartMinute INTEGER, asamDstConfEndWeekDay INTEGER, asamDstConfEndWeek INTEGER, asamDstConfEndMonth INTEGER, asamDstConfEndHour INTEGER, asamDstConfEndMinute INTEGER, asamDstRecurringAdjustment INTEGER, asamDstRecurringIsAffectedSrc TruthValue, asamDstRecurringRowStatus RowStatus } asamDstRecurringZoneIndex OBJECT-TYPE SYNTAX INTEGER (-780..840) ACCESS not-accessible STATUS mandatory DESCRIPTION "This represents a daylight saving time zone. This index must be unique amongst the table entries. Because snmp index can't recognise negative integer,so we shift the zone range to [0...1620] as a workaround ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: -780..840 PERSIST: YES DEFVALUE: NA UNITS: NA" ::= { asamDstRecurringConfEntry 1 } asamDstConfStartWeekDay OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The starting day of the week when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..6 PERSIST: YES DEFVALUE: sunday(0) UNITS: NA" DEFVAL { sunday } ::= { asamDstRecurringConfEntry 2 } asamDstConfStartWeek OBJECT-TYPE SYNTAX INTEGER { first(0), second(1), third(2), fourth(3), last(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The starting week of the month when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..4 PERSIST: YES DEFVALUE: first(0) UNITS: NA" DEFVAL { first } ::= { asamDstRecurringConfEntry 3 } asamDstConfStartMonth OBJECT-TYPE SYNTAX INTEGER { january(0), february(1), march(2), april(3), may(4), june(5), july(6), august(7), september(8), october(9), november(10), december(11) } ACCESS read-write STATUS mandatory DESCRIPTION "The starting month of the year when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..11 PERSIST: YES DEFVALUE: january(0) UNITS: NA" DEFVAL { january } ::= { asamDstRecurringConfEntry 4 } asamDstConfStartHour OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-write STATUS mandatory DESCRIPTION "The hour at which the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..23 PERSIST: YES DEFVALUE: 0 UNITS: hours" DEFVAL { 0 } ::= { asamDstRecurringConfEntry 5 } asamDstConfStartMinute OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "The number of minutes after the hours defined by asamDstConfStartHour when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..59 PERSIST: YES DEFVALUE: 0 UNITS: minutes" DEFVAL { 0 } ::= { asamDstRecurringConfEntry 6 } asamDstConfEndWeekDay OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The day of the week when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..6 PERSIST: YES DEFVALUE: sunday(0) UNITS: NA" DEFVAL { sunday } ::= { asamDstRecurringConfEntry 7 } asamDstConfEndWeek OBJECT-TYPE SYNTAX INTEGER { first(0), second(1), third(2), fourth(3), last(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The week of the month when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..4 PERSIST: YES DEFVALUE: first(0) UNITS: NA" DEFVAL { first } ::= { asamDstRecurringConfEntry 8 } asamDstConfEndMonth OBJECT-TYPE SYNTAX INTEGER { january(0), february(1), march(2), april(3), may(4), june(5), july(6), august(7), september(8), october(9), november(10), december(11) } ACCESS read-write STATUS mandatory DESCRIPTION "The month of the year when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..11 PERSIST: YES DEFVALUE: january(0) UNITS: NA" DEFVAL { january } ::= { asamDstRecurringConfEntry 9 } asamDstConfEndHour OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-write STATUS mandatory DESCRIPTION "The hour at which the summer time will stop taking effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..23 PERSIST: YES DEFVALUE: 0 UNITS: hours" DEFVAL { 0 } ::= { asamDstRecurringConfEntry 10 } asamDstConfEndMinute OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "The number of minutes after the hours defined by asamDstConfEndHour when the summer time will stop taking effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..59 PERSIST: YES DEFVALUE: 0 UNITS: minutes" DEFVAL { 0 } ::= { asamDstRecurringConfEntry 11 } asamDstRecurringAdjustment OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "The number of minutes that will be added to the time when daylight saving time takes effect. The same number of minutes will be subtracted from the time when the daylight saving time ends. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..60 PERSIST: YES DEFVALUE: 60 UNITS: NA" DEFVAL { 60 } ::= { asamDstRecurringConfEntry 12 } asamDstRecurringIsAffectedSrc OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "The value of asamDstRecurringIsAffectedSrc indicates whether this configuration entry match the OLT timezone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: 2 UNITS: NA" DEFVAL { 2 } ::= { asamDstRecurringConfEntry 13 } asamDstRecurringRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The row status used to create and delete rows in this table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA" ::= { asamDstRecurringConfEntry 14 } asamDstDateConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamDstDateConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The asamDstDateConfTable has an entry for each daylight saving time zone information with the specified with the corresponding specified days some year. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA" ::= { asamSystemMIB 63 } asamDstDateConfEntry OBJECT-TYPE SYNTAX AsamDstDateConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row entry contains information about a daylight saving time zone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA" INDEX {asamDstDateZoneIndex} ::= { asamDstDateConfTable 1 } AsamDstDateConfEntry ::= SEQUENCE { asamDstDateZoneIndex INTEGER, asamDstConfStartDate Unsigned32, asamDstConfEndDate Unsigned32, asamDstDateAdjustment INTEGER, asamDstDateIsAffectedSrc TruthValue, asamDstDateRowStatus RowStatus } asamDstDateZoneIndex OBJECT-TYPE SYNTAX INTEGER (-780..840) ACCESS not-accessible STATUS mandatory DESCRIPTION "This represents a daylight saving time zone. This index must be unique amongst the table entries. Because snmp index can't recognise negative integer,so we shift the zone range to [0...1620] as a workaround ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: -780~840 PERSIST: YES DEFVALUE: NA UNITS: minutes" ::= { asamDstDateConfEntry 1 } asamDstConfStartDate OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "The time when the daylight saving time will take effect means the number of standard seconds since 0h on 1 January 1900. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4294967295 PERSIST: YES DEFVALUE: NA UNITS: seconds" ::= { asamDstDateConfEntry 2 } asamDstConfEndDate OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "The time when daylight saving time will end means the number of standard seconds since0h on 1 January 1900. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4294967295 PERSIST: YES DEFVALUE: NA UNITS: seconds" ::= { asamDstDateConfEntry 3 } asamDstDateAdjustment OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "The number of minutes that will be added to the time when daylight saving time takes effect. The same number of minutes will be subtracted from the time when the daylight saving time ends. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..60 PERSIST: YES DEFVALUE: 60 UNITS: minutes" DEFVAL { 60 } ::= { asamDstDateConfEntry 4 } asamDstDateIsAffectedSrc OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "The value of asamDstDateIsAffectedSrc indicates whether this configuration entry match the OLT timezone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: 2 UNITS: NA" ::= { asamDstDateConfEntry 5 } asamDstDateRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The row status used to create and delete rows in this table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA" ::= { asamDstDateConfEntry 6 } asamDstEnableDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This node indicates the status of daylight saving time. If the value of this node is enable, means that daylight saving time is enabled. If the value is disable, means that daylight saving time is disabled. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: disable(2) UNITS: NA" DEFVAL { disable } ::= { asamSystemMIB 64 } asamDstIsAffected OBJECT-TYPE SYNTAX INTEGER { affected(1), notAffected(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This node indicates whether daylight saving time comes into effect or not. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: notAffected(2) UNITS: NA" DEFVAL { notAffected } ::= { asamSystemMIB 65 } asamSystemBSNAPState OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to enable of disable BSNAP ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: 1..2 DEFVALUE: 1 UNITS: NA " DEFVAL {disabled} ::= { asamSystemMIB 66 } asamSystemBSNAPServerIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to set the BSNAP server IP ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0.0.0.0 UNITS: NA " ::= { asamSystemMIB 67 } asamSystemBSNAPServerPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "BSNAP is a trace mechanism to keep binary snapshot trace of an sw error deteted, and this MIB object is used to set the BSNAP server UDP port ALCATEL NOTE: SUPPORT: YES PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA " ::= { asamSystemMIB 68 } END