ITF-MIB-EXT DEFINITIONS ::= BEGIN -- =========================================================================== -- This specification is published by Alcatel under Non-Disclosure -- Agreement(s) (NDA) with specific parties and has to be considered as -- Confidential Information as defined in such NDA. -- Alcatel reserves the right to revise this document for any reason, -- including but not limited to conformity with standards promulgated by -- various agencies, utilisation of advances in the state of the technical -- areas, or the reflection of changes in the design of any equipment, -- techniques, or procedures described or referred to herein. -- The product specifications and other technical or performance information -- contained herein are subject to change without notice. -- Updates of this document will be issued under the above NDA's. -- Alcatel makes no representation or warranty, expressed or implied, with -- respect to the sufficiency, accuracy, or utility of any information or -- opinion contained herein. Alcatel expressly advises that any use of for -- any purpose or reliance upon this technical reference is at the risk of -- the user and that Alcatel shall not be liable for any damage or injury -- incurred by any person arising out of the sufficiency, accuracy, or -- utility of any information or opinion contained herein. -- This document is not to be construed as a suggestion to any manufacturer -- to modify or change any of its products, nor does this document represent -- any commitment by Alcatel to sell or purchase any product. -- Nothing contained herein shall be construed as conferring by implication, -- estoppel, or otherwise any license or right under any patent, whether or -- not the use of any information herein necessarily employs an invention of -- any existing or later issued patent. -- Alcatel reserves the right not to offer any or all of these products and -- to withdraw any or all of them at any future time. -- Copyright (C) 2004, Alcatel. All Rights Reserved. -- =========================================================================== -- MODULE IDENTITY -- LAST-UPDATED "201609160000Z" -- ORGANIZATION "Alcatel-Lucent" -- CONTACT-INFO "email:asam.mibsupport@alcatel-lucent.com" -- DESCRIPTION -- "Alcatel proprietary extensions to the Interface MIB." -- -- REVISION "201709210000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E -- Change: -- asamLluRelayActionTimer: must have range 0..864000 -- -- -- REVISION "201709130000Z" -- DESCRIPTION -- Editor: Marita Saveyn -- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E -- Change: -- 1. asamLluRelayActionTime: must have range 0..864000, and default 50 -- -- REVISION "201708180000Z" -- DESCRIPTION -- Editor: Alfredo Alvarez -- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E -- Change: -- 1. Added asamLluRelayActionTimer -- -- REVISION "201707200000Z" -- DESCRIPTION -- Editor: Alfredo Alvarez -- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E -- Change: -- 1. Added 'disconnectTimed' to the list of possible relay status -- 2. Added asamLluRelayOperStatus and asamLluRelayActionTime -- -- REVISION "201609160000Z" -- DESCRIPTION -- Version: 3EC36485EDAA_V5.6.0.0.0 -- Editor : Ravichandran P -- Reason for Change: RCR ALU02254841- NNI support on NDLT-G -- Change : Added New Table asamIfPortTypeTable. -- -- REVISION "201510150000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V5.3.0.0.0 -- Editor: Rommy Volders -- Reason for change: ALU02136586 -- Change: Add extra value for asamLluRelayStatus. -- -- REVISION "201410080000Z" -- DESCRIPTION -- Editor: Siva Sankar -- Reason for change: Updated based on review comments for REVISION "201410030000Z" -- Change: 1. Changed the order of new tables asamIfIndexToExtIfIndexMappingTable -- and asamExtIfIndexToIfIndexMappingTable. -- 2. Gauge type is used instead of INTEGER for ExtIfIndex identifiers. -- -- REVISION "201410030000Z" -- DESCRIPTION -- Editor: Siva Sankar -- Reason for change: 3HH-11754-AGAB-DFZZA, Extended Inteface Index Support -- Change: Added new Tables asamIfIndexToExtIfIndexMappingTable -- and asamExtIfIndexToIfIndexMappingTable -- -- REVISION "201304250000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.6.0.0.0 -- Editor: Balagopal Velusamy -- Reason for change: ALU00204502, EFM Inteface Counter Support -- Change: Added new Table asamIfExtCounterSupportTable -- Indicates supported counters for an Interface. -- -- REVISION "201304250000Z" -- DESCRIPTION -- "Version: 3EC36485EDAA_V4.6.0.0.0 -- Editor: Karel Meijfroidt -- Reason for change: ALU01815260, Alarm Mechanism Improvement -- Change: change the RANGE in the description of -- the asamIfExtAlmReportingSeverityDefault. -- -- REVISION "2012101111200Z" -- DESCRIPTION -- "Version: 3EC15505EAAA_V4.5.0.0.0 -- Editor: Ludwig Pauwels -- Changes: -- * Remove LLU Relay Status Table. -- -- REVISION "201206071200Z" -- DESCRIPTION -- "Version: 3EC15505EAAA_V4.4.4.0.0 -- Editor: Ludwig Pauwels -- Changes: -- * Addition of LLU Relay Status Table. -- -- REVISION "20080108200Z" -- DESCRIPTION -- "Version: 3EC15506EAAA_V3.5.0.0.0 -- Editor: Xia Hui -- Changes: Add one values for asamItfMetallicTestTypes and four values for asamItfMetallicTestCodes -- *asamItfMetallicTestResetTimer -- *asamItfLineAdminOperAbnormal -- *asamItfLineAnotherLineTestInProgress -- *asamItfTestNotPossible -- *asamItfLineBusy -- -- REVISION "20060621200Z" -- DESCRIPTION -- "Version: 3EC15506EAAA_V3.5.0.0.0 -- Editor: Liu Jie -- Changes: Add two values for asamItfMetallicTestTypes -- * asamItfMetallicTestInwardOnly -- * asamItfMetallicTestOutwardOnly -- -- REVISION "20060529200Z" -- DESCRIPTION -- "Version: 3EC15506EAAA_V3.2.0.0.0 -- Editor: Sven Dhuyvetter -- Changes: BDFhw36810: Open SNMP -- -- REVISION "20060323200Z" -- DESCRIPTION -- "Version: 3EC15505EAAA_V3.1.0.0.0 -- Editor: Ma liya -- Changes: -- * Extend Customer Id length to support a maximum of 64 characters." -- -- REVISION "200601231200Z" -- DESCRIPTION -- "Version: 3EC15506EAAA_V2.4.0.0.0 -- Editor: Bart Bogaert -- Changes: Implemented BDFhw70643: strict syntax checks (smilint)" -- -- REVISION "200506151200Z" -- DESCRIPTION -- "Version: 3EC15505EAAA_V2.3.1.0.0 -- Editor: Pradeep Hosaritthi -- Changes: -- * Addition of LLU Relay Status Table." -- -- REVISION "200404081200Z" -- DESCRIPTION -- "Version: 3EC15506EAAA_E1.1.0.0 -- Editor: Rafael Van Driessche -- Changes: addition of asamIfExtIfSpecific." -- -- REVISION "200401121200Z" -- DESCRIPTION -- "Version: 3EC15506EAAA_E1.0.0.0 -- Editor: Rafael Van Driessche -- Changes: revision for iSAM with only editorial changes." -- -- REVISION "200205131200Z" -- DESCRIPTION -- "Version: 3EC15506AAAA_E5.0.0.1 -- Editor: Frank Devolder -- Changes: -- * object asamPhyItfChangeOccurredTrapEnable obsoleted (BDFaa44804)." -- -- REVISION "200106031200Z" -- DESCRIPTION -- "Version: 3EC15506AAAA_E5.0.0.0 -- Editor: Frank Devolder -- Changes: -- * add asamShelfPhyItfSummaryTable to support hierarchical summary -- bitmaps for physical interfaces and make ASAM-level interface -- bitmaps obsolete." -- -- REVISION "200011161200Z" -- DESCRIPTION -- "Version 3EC15506AAAA_E4.2.0.0 -- Editor: Dominic Chorafakis -- Changes: -- * Documenting MAX_PIF size for R4.2: 24 line boards with IMA." -- -- REVISION "200007111200Z" -- DESCRIPTION -- "Version: TBC -- Editor: H. Dedecker -- Changes: -- * ITF_MIB_EXT extended with line test (BDFaa26075)." -- -- REVISION "199907081200Z" -- DESCRIPTION -- "Version: 3EC15506AAAA_R2.0.1 -- Editor: K. Van Eynde -- Changes: -- * AsamItfSeverityFilterType extended with noAlarms (BDFaa18947)." -- -- REVISION "199904301200Z" -- DESCRIPTION -- "Version: 3EC15506AAAA_R2.0.0 -- Editor: K. Van Eynde -- Changes: updates to supporte severity per line feature: -- * define new type AsamItfSeverityFilterType -- * extend AsamIfExtEntry with new column asamIfExtAlmReportingSeverity -- * add table asamIfExtAlmReportingSeverityDefaultTable for default -- severity per interface type." -- =========================================================================== IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB Counter, Gauge FROM RFC1155-SMI asam FROM SYSTEM-MIB ifIndex, InterfaceIndex FROM ITF-MIB IANAifType FROM IANAifType-MIB AsamAlarmSeverityType FROM ASAM-ALARM-MIB eqptHolderId FROM ASAM-EQUIP-MIB; AsamItfSeverityFilterType ::= INTEGER { indeterminate (1), -- Not a definite known severity warning (2), -- Just to inform as a warning minor (3), -- Not service affecting major (4), -- Service affecting critical (5), -- Service breaking noAlarms (254), -- do not report alarm default (255) -- take default as specified in -- asamIfExtAlmReportingSeverityDefaultTable } asamItfMIB OBJECT IDENTIFIER ::= { asam 6 } -- Extensions to MIB-II asamPhyItfOperStatus OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS obsolete DESCRIPTION "The bitmap for the operational status of the physical interfaces. MAX_PIF: the maximum number of interface per board SLOTS: the number of slots in the system Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF ========== ========== ========== 0 1 ... SLOTS-1 Up = 1, Down = 0 ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NA INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: This object is not supported." ::= {asamItfMIB 1} asamPhyItfBitmap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS obsolete DESCRIPTION "The bitmap for the physical interfaces. MAX_PIF: the maximum number of interface per board SLOTS: the number of slots in the system Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF ========== ========== ========== 0 1 ... SLOTS-1 Present = 1, Not present = 0 ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NA INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: This object is not supported." ::= {asamItfMIB 2} asamPhyItfChangeOccurredTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Boolean indicating wether the changeOccurredTrap should be sent or not. The trap will not be sent if the linkUpDownTrap was already sent (regardless of the value asamChangeOccurredTrapEnable). ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NA INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: This object is not supported." ::= {asamItfMIB 3} asamPhyItfNumberChangeOccurred OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a counter indicating the number of state changes of the physical line. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPARSE: NA DESCR: NA" ::= {asamItfMIB 4} asamIfExtTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamIfExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An extension to the ifTable defined in ITF-MIB. ALCATEL NOTE: TABLESIZE: DEP same size as the ifTable." ::= {asamItfMIB 5} asamIfExtEntry OBJECT-TYPE SYNTAX AsamIfExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing management information applicable to a particular interface." INDEX { ifIndex } ::= {asamIfExtTable 1} AsamIfExtEntry ::= SEQUENCE { asamIfExtCustomerId DisplayString, asamIfExtAlmReportingSeverity AsamItfSeverityFilterType, asamIfExtIfSpecific OBJECT IDENTIFIER } asamIfExtCustomerId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "A textual string identifying the customer assigned to this interface. Following strings have a special meaning: 'reserved' : the interface is reserved by an operator; 'faulty' : the interface is indicated by an operator as being faulty; 'available': the interface has no customer assigned to it. This object is only supported for physical interfaces. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" DEFVAL {"available"} ::= {asamIfExtEntry 1} asamIfExtAlmReportingSeverity OBJECT-TYPE SYNTAX AsamItfSeverityFilterType ACCESS read-write STATUS mandatory DESCRIPTION "This objects specifies for a certain physical interface and all interface above in the interface hierarchy the minimal severity for an alarm to be reported. If no value is provided for this object, it will obtain the value 'default', which means the actual value is as specified in the asamIfExtAlmReportingSeverityDefaultTable. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES RANGE: NA DEFVALUE: 'default' UNITS: NA SPARSE: NA DESCR: NA" ::= {asamIfExtEntry 2} asamIfExtIfSpecific OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular media being used to realize the interface. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= {asamIfExtEntry 3} asamNextAvailablePortType OBJECT-TYPE SYNTAX IANAifType ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the ifType for which the next available physical interface can be retrieved. Only values of ifType that represent physical interfaces are allowed. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: YES RANGE: NA DEFVALUE: xdslLine UNITS: NA SPARSE: NA DESCR: NA" ::= {asamItfMIB 6} asamNextAvailablePort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the next available physical interface for which the ifType is as specified in asamNextAvailablePortType. A physical interface is considered available if its asamIfExtCustomerId has the value 'available' and its internal ASAM state is 'reachable'. If no interface of the desired type is available an error (genErr) is returned when a get-request is issued for this object. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= {asamItfMIB 7} asamIfExtAlmReportingSeverityDefaultTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamIfExtAlmReportingSeverityDefaultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table specifying for each of the supported interface types for asamIfExtAlmReportingSeverity its default minimal severity. ALCATEL NOTE: TABLESIZE: DEP number of supported interface types." ::= {asamItfMIB 8} asamIfExtAlmReportingSeverityDefaultEntry OBJECT-TYPE SYNTAX AsamIfExtAlmReportingSeverityDefaultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the asamIfExtAlmReportingSeverityDefaultTable. " INDEX { asamIfExtIfType } ::= {asamIfExtAlmReportingSeverityDefaultTable 1} AsamIfExtAlmReportingSeverityDefaultEntry ::= SEQUENCE { asamIfExtIfType IANAifType, asamIfExtAlmReportingSeverityDefault AsamAlarmSeverityType } asamIfExtIfType OBJECT-TYPE SYNTAX IANAifType ACCESS read-only STATUS mandatory DESCRIPTION "The type of the interface. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtAlmReportingSeverityDefaultEntry 1 } asamIfExtAlmReportingSeverityDefault OBJECT-TYPE SYNTAX AsamAlarmSeverityType ACCESS read-write STATUS mandatory DESCRIPTION "The default minimal severity for an alarm to be reported that will be used for interfaces of the type specified in asamIfExtIfType. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: YES RANGE: 1-5 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" DEFVAL {major} ::= { asamIfExtAlmReportingSeverityDefaultEntry 2 } asamItfTest OBJECT IDENTIFIER ::= {asamItfMIB 9} -- Extension to EXT MIB-II for line test asamItfMetallicTestGroup OBJECT IDENTIFIER ::= {asamItfTest 1} -- First subgroup identifying metallic test group asamItfMetallicTestTypes OBJECT IDENTIFIER ::= {asamItfMetallicTestGroup 1} -- First subgroup identifying metallic test types asamItfMetallicTestLimited OBJECT IDENTIFIER ::= {asamItfMetallicTestTypes 1} asamItfMetallicTestTapLooped OBJECT IDENTIFIER ::= {asamItfMetallicTestTypes 2} asamItfMetallicTestMonitor OBJECT IDENTIFIER ::= {asamItfMetallicTestTypes 3} asamItfMetallicTestSplitAccess OBJECT IDENTIFIER ::= {asamItfMetallicTestTypes 4} asamItfMetallicTestInwardOnly OBJECT IDENTIFIER ::= {asamItfMetallicTestTypes 5} asamItfMetallicTestOutwardOnly OBJECT IDENTIFIER ::= {asamItfMetallicTestTypes 6} asamItfMetallicTestResetTimer OBJECT IDENTIFIER ::= {asamItfMetallicTestTypes 7} asamItfMetallicTestCodes OBJECT IDENTIFIER ::= {asamItfMetallicTestGroup 2} -- Second subgroup identifying metallic test codes asamItfLineNotReachable OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 1} asamItfPreparingMetallicTest OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 2} asamItfAnotherMetallicTestInProgress OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 3} asamItfTestAppliqueNotReachable OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 4} asamItfPotsSplitterNotReachable OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 5} asamItfWcapNotReachable OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 6} -- reserved for ASAM asamItfLineBusy OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 7} -- To indicate the line status is not in either idle or power down or parking mode. Currently only for narrowband MTA asamItfLineAdminOperAbnormal OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 8} -- To indicate the line is either admin lock or oper disable -- Crrently only for narrowband MTA asamItfLineAnotherLineTestInProgress OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 9} -- To indicate another line test is in progress. Currently only for NB MTA asamItfTestNotPossible OBJECT IDENTIFIER ::= {asamItfMetallicTestCodes 10} asamShelfPhyItfSummaryTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamShelfPhyItfSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Shelf summary table, summarizing status information of physical interfaces of boards which can be equipped within the corresponding shelf. ALCATEL NOTE: TABLESIZE: DEP number of shelves." ::= { asamItfMIB 10 } asamShelfPhyItfSummaryEntry OBJECT-TYPE SYNTAX AsamShelfPhyItfSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of the shelf physical interface summary table. " INDEX { eqptHolderId } ::= { asamShelfPhyItfSummaryTable 1 } AsamShelfPhyItfSummaryEntry ::= SEQUENCE { asamShelfPhyItfNumberChangeOccurred Counter, asamShelfPhyItfOperStatus OCTET STRING, asamShelfPhyItfBitmap OCTET STRING } asamShelfPhyItfNumberChangeOccurred OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a counter indicating the number of state changes of physical lines, equipped on boards within this shelf. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: state change SPARSE: NA DESCR: NA" ::= { asamShelfPhyItfSummaryEntry 1 } asamShelfPhyItfOperStatus OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The bitmap for the operational status of the physical interfaces of boards which can be equipped within this shelf. MAX_PIF: the maximum number of physical interfaces per board (lines + IMA). SLOTS: the maximum number of slots within a shelf Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF ========== ========== ========== 0 1 ... SLOTS-1 Up = 1, Down = 0. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: DEP: #slots*#interfaces per board DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamShelfPhyItfSummaryEntry 2 } asamShelfPhyItfBitmap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The bitmap for the presence of the physical interfaces of boards which can be equipped within this shelf. MAX_PIF: the maximum number of physical interfaces per board (lines + IMA). SLOTS: the maximum number of slots within a shelf Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF ========== ========== ========== 0 1 ... SLOTS-1 Present = 1, Not present = 0. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: DEP: #slots*#interfaces per board DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamShelfPhyItfSummaryEntry 3 } -- ========================================================= -- the following table is supported from R5.3 onwards (e.g. 7367 ISAM SX-16P) -- ========================================================= asamLluTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamLluEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Local Loop Unbundling Table. ALCATEL NOTE: TABLESIZE: DEP same size as the ifTable" ::= {asamItfMIB 11} asamLluEntry OBJECT-TYPE SYNTAX AsamLluEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the asamLluTable. There will be an entry for each physical interface line (xdslLine) if the corresponding board is configured/planned and if the corresponding board supports LLU, i.e. no entries are auto-created in the MIB - for boards that are not planned, - for boards that are planned but for which the HW does not support LLU. the operator cannot create an entry nor delete an entry in this table" INDEX { ifIndex } ::= { asamLluTable 1} AsamLluEntry ::= SEQUENCE { asamLluRelayStatus AsamLluRelayStatus, asamLluRelayActionTime Gauge, asamLluRelayOperStatus AsamLluRelayStatus, asamLluRelayActionTimer Gauge } AsamLluRelayStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Handling of relay for Local Loop Unbundling. unbundle (1),-- unbundling LLU relay on the particular physical line mentioned by a valid physical interface ifIndex. If LLURelay is unbundled, then the line is throughconnected to an external connector allowing to connect the line to another exchange. connect(2), -- connecting LLU relay on the particular physical line mentioned by a valid physical interface ifIndex. If LLURelay state of a particular line is connected then the line is served by the LT. For a DSL line this means it will pass to the card its low and high pass filter. The effect is that DSL signal is supported by the card, the POTS/ISDN signal is brought to an external connector. connectForMelt(3), -- connecting LLU relay for Melt on the particular physical line mentioned by a valid physical interface ifIndex. If LLURelay state of a particular line is connected with Melt then the line is served by the LT and the MELT test block can be used. For a DSL line this means it will pass to the card its low and high pass filter and a MELT measurement can be performed. The effect is that DSL signal is supported by the card, the POTS/ISDN signal is not connected. disconnect(4), -- disconnecting LLU relay on the particular physical line mentioned by a valid physical interface ifIndex. If LLURelay state of a particular line is disconnected: -the line is open ended at the LT side -the MELT test block(if present) on LT is throughconnected to an external connector This particular state allows for two types of testing: -an open ended measurement can be performed at end user side -future: a MELT measurement can be performed for the external link towards another exchange(if MELT test block present) disconnectTimed(5), -- Temporarily disconnect LLU relay. After a timeout specified by asamLluRelayActionTime, the relay goes back to 'connect'" SYNTAX INTEGER { unbundle (1), connect (2), connectForMelt (3), disconnect (4), disconnectTimed (5) } asamLluRelayStatus OBJECT-TYPE SYNTAX AsamLluRelayStatus ACCESS read-write STATUS mandatory DESCRIPTION "Configured administrative status of the relay. This value is kept persistent ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: unbundle UNITS: NA SPARSE: NA DESCR: NA" ::= {asamLluEntry 1} asamLluRelayActionTime OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The delay in tenths of seconds during which the relay will be in disconnected state before switching to connected state after asamLluRelayStatus is configured to 'disconnectTimed' ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..864000 DEFVALUE: 50 UNITS: s/10 SPARSE: NA DESCR: NA" ::= {asamLluEntry 2} asamLluRelayOperStatus OBJECT-TYPE SYNTAX AsamLluRelayStatus ACCESS read-only STATUS mandatory DESCRIPTION "Operational status of the relay. This represents the actual status of the relay at any time. The value 'disconnectTimed' does not apply in this context ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= {asamLluEntry 3} asamLluRelayActionTimer OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Time in tenths of seconds remaining before switching to connected state after asamLluRelayStatus is configured to 'disconnectTimed'. 0 means that the timer associated with disconnectTimed is not active. This can happen when: - asamLluRelayStatus has never been configured to 'disconnectTimed' - The timer has been configured with asamLluRelayActionTime = 0 - The timer has expired ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..864000 DEFVALUE: 0 UNITS: s/10 SPARSE: NA DESCR: NA" ::= {asamLluEntry 4} asamIfExtCounterSupportTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamIfExtCounterSupportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Table listing the supported counters for a particular interface . ALCATEL NOTE: TABLESIZE: DEP number of supported interface types." ::= {asamItfMIB 12 } asamIfExtCounterSupportEntry OBJECT-TYPE SYNTAX AsamIfExtCounterSupportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing list of supported counter information applicable to a particular interface." INDEX { asamIfExtCounterIndex } ::= {asamIfExtCounterSupportTable 1} AsamIfExtCounterSupportEntry ::= SEQUENCE { asamIfExtCounterIndex IANAifType, asamifTblifDescr INTEGER, asamifTblifMtu INTEGER, asamifTblifSpeed INTEGER, asamifTblifPhysAddress INTEGER, asamifTblifAdminStatus INTEGER, asamifTblifOperStatus INTEGER, asamifTblifLastChange INTEGER, asamifTblifInOctets INTEGER, asamifTblifInUcastPkts INTEGER, asamifTblifInNUcastPkts INTEGER, asamifTblifInDiscards INTEGER, asamifTblifInErrors INTEGER, asamifTblifInUbknownProtos INTEGER, asamifTblifOutOctets INTEGER, asamifTblifOutUcastPkts INTEGER, asamifTblifOutNUcastPkts INTEGER, asamifTblifOutDiscards INTEGER, asamifTblifOutErrors INTEGER, asamifxTblifName INTEGER, asamifxTblifInMulticastPkts INTEGER, asamifxTblifInBroadcastPkts INTEGER, asamifxTblifOutMulticastPkts INTEGER, asamifxTblifOutBroadcastPkts INTEGER, asamifxTblifHCInOctets INTEGER, asamifxTblifHCInUcastPkts INTEGER, asamifxTblifHCInMulticastPkts INTEGER, asamifxTblifHCInBroadcastPkts INTEGER, asamifxTblifHCOutOctets INTEGER, asamifxTblifHCOutUcastPkts INTEGER, asamifxTblifHCOutMulticastPkts INTEGER, asamifxTblifHCOutBroadcastPkts INTEGER, asamifxTblifLinkUpDownTrapEnable INTEGER, asamifxTblifHighSpeed INTEGER, asamifxTblifPromiscuousMode INTEGER, asamifxTblifConnectorPresent INTEGER, asamifxTblifAlias INTEGER, asamifxTblifCounterDiscontinuityTime INTEGER } asamIfExtCounterIndex OBJECT-TYPE SYNTAX IANAifType ACCESS read-only STATUS mandatory DESCRIPTION "A unique non-zero value representing an interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 1 } asamifTblifDescr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 2 } asamifTblifMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 3 } asamifTblifSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 4 } asamifTblifPhysAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 5 } asamifTblifAdminStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 6 } asamifTblifOperStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 7 } asamifTblifLastChange OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 8 } asamifTblifInOctets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 9 } asamifTblifInUcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 10 } asamifTblifInNUcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 11 } asamifTblifInDiscards OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 12 } asamifTblifInErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 13 } asamifTblifInUbknownProtos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 14 } asamifTblifOutOctets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 15 } asamifTblifOutUcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 16 } asamifTblifOutNUcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 17 } asamifTblifOutDiscards OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 18 } asamifTblifOutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 19 } asamifxTblifName OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 20 } asamifxTblifInMulticastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 21 } asamifxTblifInBroadcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 22 } asamifxTblifOutMulticastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 23 } asamifxTblifOutBroadcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 24 } asamifxTblifHCInOctets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 25 } asamifxTblifHCInUcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 26 } asamifxTblifHCInMulticastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 27 } asamifxTblifHCInBroadcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 28 } asamifxTblifHCOutOctets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 29 } asamifxTblifHCOutUcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 30 } asamifxTblifHCOutMulticastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 31 } asamifxTblifHCOutBroadcastPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 32 } asamifxTblifLinkUpDownTrapEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 33 } asamifxTblifHighSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 34 } asamifxTblifPromiscuousMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 35 } asamifxTblifConnectorPresent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 36 } asamifxTblifAlias OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 37 } asamifxTblifCounterDiscontinuityTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A value of 1 indicates that this parameter is supported for the specified interface A value of 0 indicates that this parameter is not supported for the specified interface . ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 0..1 DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfExtCounterSupportEntry 38 } -- ********************************************* -- -- IF-INDEX TO EXTENDED IF-INDEX MAPPING TABLE -- -- This table is a helper table. -- -- It contains the mapping of the ifIndex to extended ifIndex -- of all interfaces that have a linear value -- -- ********************************************* asamIfIndexToExtIfIndexMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamIfIndexToExtIfIndexMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ifIndex to extended ifIndex Mapping Table. ALCATEL NOTE: TABLESIZE: DEP same size as the ifTable." ::= { asamItfMIB 13 } asamIfIndexToExtIfIndexMappingEntry OBJECT-TYPE SYNTAX AsamIfIndexToExtIfIndexMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing mapping from ifIndex to extended ifIndex of interfaces." INDEX { ifIndex } ::= { asamIfIndexToExtIfIndexMappingTable 1 } AsamIfIndexToExtIfIndexMappingEntry ::= SEQUENCE { asamExtIfIndexId1 Gauge, asamExtIfIndexId2 Gauge, asamExtIfIndexId3 Gauge } asamExtIfIndexId1 OBJECT-TYPE SYNTAX Gauge (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the first indentifier of the extended-ifIndex INTEGER.xxxx.xxxx. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: Gauge DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfIndexToExtIfIndexMappingEntry 1 } asamExtIfIndexId2 OBJECT-TYPE SYNTAX Gauge (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the second indentifier of the extended-ifIndex xxxx.INTEGER.xxxx. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: Gauge DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfIndexToExtIfIndexMappingEntry 2 } asamExtIfIndexId3 OBJECT-TYPE SYNTAX Gauge (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the third indentifier of the extended-ifIndex xxxx.xxxx.INTEGER. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: Gauge DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamIfIndexToExtIfIndexMappingEntry 3 } -- ********************************************* -- -- EXTENDED IF-INDEX TO IF-INDEX MAPPING TABLE -- -- This table is a helper table. -- -- It contains the mapping of the extended-ifIndex to ifIndex -- of all interfaces that have a linear value -- -- ********************************************* asamExtIfIndexToIfIndexMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamExtIfIndexToIfIndexMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extended-ifIndex to ifIndex Mapping Table. ALCATEL NOTE: TABLESIZE: DEP same size as the ifTable." ::= { asamItfMIB 14 } asamExtIfIndexToIfIndexMappingEntry OBJECT-TYPE SYNTAX AsamExtIfIndexToIfIndexMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing mapping from extended-ifIndex to ifIndex of interfaces." -- Type : INTEGER.INTEGER.INTEGER (total 96 bit) -- asamExtIfIndexId1 -> INTEGER.xxxx.xxxx -- asamExtIfIndexId2 -> xxxx.INTEGER.xxxx -- asamExtIfIndexId3 -> xxxx.xxxx.INTEGER INDEX { asamExtIfIndexId1, asamExtIfIndexId2, asamExtIfIndexId3 } ::= { asamExtIfIndexToIfIndexMappingTable 1 } AsamExtIfIndexToIfIndexMappingEntry ::= SEQUENCE { asamIfIndex InterfaceIndex } asamIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the ifIndex of the interface. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: ifIndex DEFVALUE: NA UNITS: NA SPARSE: NA DESCR: NA" ::= { asamExtIfIndexToIfIndexMappingEntry 1 } asamIfPortTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF AsamIfPortTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "EFM Interface PortType Table. ALCATEL NOTE: TABLESIZE: Entry will be equivalent to number of EFM interfaces exist." ::= { asamItfMIB 15 } asamIfPortTypeEntry OBJECT-TYPE SYNTAX AsamIfPortTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry appears in this table for each EFM interface exist in the system." INDEX { ifIndex } ::= { asamIfPortTypeTable 1 } AsamIfPortTypeEntry ::= SEQUENCE { asamIfPortType INTEGER } asamIfPortType OBJECT-TYPE SYNTAX INTEGER { uni(1), nni(2), huni(3), uplink(4), lemi(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the whole network service model based on this interface. User Network Interface (UNI) is an interface which specifies one untrust subscriber is connected. Network to Network Interface (NNI) is an interface which specifies one trust networks in connected. Hicap User Network Interface (HUNI) is an interface which specifies one untrust subscriber is connected, but with hicapacity services. Uplink specifies the interface is at the upside of the ISAM, i.e. connecting the ISAM to the network. Lemi is a local ethernet management interface. It is supported only on a restricted set of systems/cards. ALCATEL NOTE: ACCESS : NA USAGE : NA PERSIST: YES INSRVMOD: NA RANGE : NA DEFVALUE: uni UNITS : NA SPARSE : NA DESCR : This Object is supported only for few LTs.Setting of portType is not allowed for native ethernet interfaces.Setting portType as UNI is allowed for all interfaces except native ethernet.Setting portType as NNI is allowed only for EFM intefaces on supported LTs.For ethernet interfaces (native Ethernet) get command will display the portType from extendEtherPortCtrlTable" ::= { asamIfPortTypeEntry 1 } END