TIMETRA-CELLULAR-MIB DEFINITIONS ::= BEGIN

IMPORTS
    InetAddress, InetAddressType
                                                         FROM INET-ADDRESS-MIB
    MODULE-COMPLIANCE, NOTIFICATION-GROUP,
    OBJECT-GROUP
                                                         FROM SNMPv2-CONF
    Integer32, MODULE-IDENTITY,
    NOTIFICATION-TYPE, OBJECT-TYPE,
    Unsigned32
                                                         FROM SNMPv2-SMI
    DateAndTime, DisplayString, RowStatus,
    TEXTUAL-CONVENTION, TimeStamp,
    TruthValue
                                                         FROM SNMPv2-TC
    tmnxCardSlotNum, tmnxMDASlotNum
                                                         FROM TIMETRA-CHASSIS-MIB
    timetraSRMIBModules, tmnxSRConfs,
    tmnxSRNotifyPrefix, tmnxSRObjs
                                                         FROM TIMETRA-GLOBAL-MIB
    tmnxPortNotifyPortId, tmnxPortPortID
                                                         FROM TIMETRA-PORT-MIB
    TItemDescription, TNamedItemOrEmpty,
    TmnxAuthPassword, TmnxEnabledDisabled,
    TmnxEnabledDisabledAdminState
                                                         FROM TIMETRA-TC-MIB
    ;

timetraCellularMIBModule         MODULE-IDENTITY
    LAST-UPDATED "201607180000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia SROS Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module for the Nokia SROS implementation
         of cellular ports.

         Copyright 2016-2018 Nokia. All rights reserved. Reproduction of this
         document is authorized on the condition that the foregoing copyright
         notice is included.

         This SNMP MIB module (Specification) embodies Nokia's
         proprietary intellectual property.  Nokia retains all
         title and ownership in the Specification, including any
         revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied `as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "201607180000Z"
    DESCRIPTION
        "Rev 1.0               18 Jul 2016 00:00
         Initial version of the TIMETRA-PORT-CELLULAR-MIB."

    ::= { timetraSRMIBModules 109 }

TmnxCellularPdnProfileId         ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxCellularPdnProfileId identifies a specific Packet Data Network
         profile in the system."
    SYNTAX      Unsigned32 (0..15)

TmnxCellularAccessPointName      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxCellularAccessPointName represents a cellular Access
         Point Name (APN)."
    REFERENCE
        "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Core Network
         and Terminals; Numbering, addressing and identification',
         3GPP, June 2016, Section 9, 'Definition of Access Point Name'"
    SYNTAX      DisplayString (SIZE (0..100))

TmnxCellularImei                 ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "2a-6a-6a-2a"
    STATUS      current
    DESCRIPTION
        "The data type TmnxCellularImei represents an International Mobile
         Station Equipment Identity (IMEI) number."
    REFERENCE
        "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Core Network
         and Terminals; Numbering, addressing and identification',
         3GPP, June 2016, Section 6, 'International Mobile Station
         Equipment Identity and Software Version Number'"
    SYNTAX      DisplayString (SIZE (0|15..16))

TmnxCellularSimCardNumber        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxCellularSimCardNumber identifies a specific cellular Subscriber
         Identity Module (SIM) card in a system."
    SYNTAX      Unsigned32 (1..2)

TmnxCellularSimCardIccid         ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxCellularSimCardIccid represents an Integrated
         Circuit Card Identifier (ICCID).  Each SIM card has a unique
         ICCID."
    REFERENCE
        "ITU-T E.118, 'The international telecommunication charge card',
         ITU-T, May 2006, Section 4, 'Numbering system'"
    SYNTAX      DisplayString (SIZE (0..20))

TmnxCellularImsi                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxCellularImsi represents an International
         Mobile Subscriber Identity.  An IMSI uniquely identifies a
         mobile subscriber."
    REFERENCE
        "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Core Network
         and Terminals; Numbering, addressing and identification',
         3GPP, June 2016, Section 2, 'Identification of mobile subscribers'"
    SYNTAX      DisplayString (SIZE (0..15))

TmnxCellularPdnId                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxCellularPdnId identifies a specific Packet Data Network (PDN) on a
         cellular port."
    SYNTAX      Unsigned32 (1)

TmnxCellularChannelNumber        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxCellularChannelNumber identifies an channel number.  For LTE,
         this is an E-UTRA Absolute Radio Frequency Channel Number (EARFCN),
         as described in 3GPP TS 36.101."
    REFERENCE
        "3GPP TS 36.101 version 14.1.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Radio Access
         Network; Evolved Universal Terrestrial Radio Access (E-UTRA);
         User Equipment (UE) radio transmission and reception (Release 14),
         3GPP, September 2016, Table 5.7.3-1, 'E-UTRA channel numbers"
    SYNTAX      Unsigned32 (0..262143)

TmnxCellularBearerRate           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxCellularBearerRate identifies a bit rate of a bearer on a cellular
         interface, in kbit/s."
    SYNTAX      Unsigned32 (0..100000)

tmnxCellularObjs                 OBJECT IDENTIFIER ::= { tmnxSRObjs 109 }

tmnxCellularConfigObjs           OBJECT IDENTIFIER ::= { tmnxCellularObjs 2 }

tmnxCellularConfigTimestamps     OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 1 }

tmnxCellPdnProfileTblLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfileTblLastChanged indicates the sysUpTime
         at the time of the most recent management-initiated change to the
         table tmnxCellularPdnProfileTable."
    ::= { tmnxCellularConfigTimestamps 1 }

tmnxCellSimCardTableLastChanged  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardTableLastChanged indicates the sysUpTime
         at the time of the most recent management-initiated change to the
         table tmnxCellularSimCardTable."
    ::= { tmnxCellularConfigTimestamps 2 }

tmnxCellPdnTblLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnTblLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to the table
         tmnxCellularPdnTable."
    ::= { tmnxCellularConfigTimestamps 3 }

tmnxCellPortTblLastChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortTblLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to the table
         tmnxCellularPortTable."
    ::= { tmnxCellularConfigTimestamps 4 }

tmnxCellPortCbsdAuthCfgTblLstChg OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthCfgTblLstChg indicates the sysUpTime
         at the time of the most recent management-initiated change to the
         table tmnxCellPortCbsdAuthCfgTable."
    ::= { tmnxCellularConfigTimestamps 5 }

tmnxCellularSystemConfigObjs     OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 2 }

tmnxCellularPdnProfileTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellPdnProfileEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularPdnProfileTable has a series of configurations,
         applicable to cellular Packet Data Networks, which are indexed by a
         PDN profile number."
    ::= { tmnxCellularSystemConfigObjs 1 }

tmnxCellPdnProfileEntry          OBJECT-TYPE
    SYNTAX      TmnxCellPdnProfileEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a specific PDN profile.

         The system automatically creates one entry, at index 0, to represent
         the default PDN profile.  The user cannot modify the configuration
         of this default profile.

         Other entries can be created and deleted via SNMP SET operations, and
         the user can modify the configuration of those entries."
    INDEX       { tmnxCellPdnProfileId }
    ::= { tmnxCellularPdnProfileTable 1 }

TmnxCellPdnProfileEntry          ::= SEQUENCE
{
    tmnxCellPdnProfileId             TmnxCellularPdnProfileId,
    tmnxCellPdnProfRowStatus         RowStatus,
    tmnxCellPdnProfLastChanged       TimeStamp,
    tmnxCellPdnProfDescription       TItemDescription,
    tmnxCellPdnProfApn               TmnxCellularAccessPointName,
    tmnxCellPdnProfAuthType          INTEGER,
    tmnxCellPdnProfUsername          DisplayString,
    tmnxCellPdnProfPassword          TmnxAuthPassword,
    tmnxCellPdnProfProtocol          INTEGER
}

tmnxCellPdnProfileId             OBJECT-TYPE
    SYNTAX      TmnxCellularPdnProfileId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfileId specifies the number of a specific
         PDN profile configured in the system.

         The value 0 is reserved for a default profile, which is automatically
         created by the system, and cannot be modified or deleted by the user."
    ::= { tmnxCellPdnProfileEntry 1 }

tmnxCellPdnProfRowStatus         OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfRowStatus specifies the row status of the
         PDN profile entry.  It is used to control the creation and deletion of
         PDN profiles.

         The user cannot delete the PDN profile whose tmnxCellPdnProfileId has
         a value of 0."
    ::= { tmnxCellPdnProfileEntry 2 }

tmnxCellPdnProfLastChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to this table row.

         For the default PDN profile, tmnxCellPdnProfLastChanged has a value of
         0"
    ::= { tmnxCellPdnProfileEntry 3 }

tmnxCellPdnProfDescription       OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfDescription specifies a user provided
         description for this PDN profile.

         For the default PDN profile, tmnxCellPdnProfDescription has a value of
         'default profile'"
    DEFVAL      { ''H }
    ::= { tmnxCellPdnProfileEntry 4 }

tmnxCellPdnProfApn               OBJECT-TYPE
    SYNTAX      TmnxCellularAccessPointName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfApn specifies the APN for this PDN.

         The cellular service provider may require the user to program the APN
         value in order to use the service.

         For the default PDN profile, tmnxCellPdnProfApn has a value of the
         empty string"
    DEFVAL      { ''H }
    ::= { tmnxCellPdnProfileEntry 5 }

tmnxCellPdnProfAuthType          OBJECT-TYPE
    SYNTAX      INTEGER {
        none (0),
        pap  (1),
        chap (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfAuthType specifies the method of
         authentication used on the PDN.

         For the default PDN profile, tmnxCellPdnProfAuthType has a value of
         'none (0)'."
    DEFVAL      { none }
    ::= { tmnxCellPdnProfileEntry 6 }

tmnxCellPdnProfUsername          OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfUsername specifies the username when
         authenticating the PDN.

         For the default PDN profile, tmnxCellPdnProfUsername has a value of
         the empty string."
    DEFVAL      { ''H }
    ::= { tmnxCellPdnProfileEntry 7 }

tmnxCellPdnProfPassword          OBJECT-TYPE
    SYNTAX      TmnxAuthPassword
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfPassword specifies the password when
         authenticating the PDN.

         A get request on this object always returns an empty string.

         For the default PDN profile, tmnxCellPdnProfPassword has a value of
         the empty string."
    DEFVAL      { ''H }
    ::= { tmnxCellPdnProfileEntry 8 }

tmnxCellPdnProfProtocol          OBJECT-TYPE
    SYNTAX      INTEGER {
        ipv4 (1),
        ipv6 (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfProtocol specifies whether the PDN shall
         use IPv4 or IPv6 addresses.

         For the default PDN profile, tmnxCellPdnProfProtocol has a value of
         ipv4."
    DEFVAL      { ipv4 }
    ::= { tmnxCellPdnProfileEntry 9 }

tmnxCellularPortConfigObjs       OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 3 }

tmnxCellularSimCardTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularSimCardEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularSimCardTable has an entry for each SIM card in the
         system."
    ::= { tmnxCellularPortConfigObjs 1 }

tmnxCellularSimCardEntry         OBJECT-TYPE
    SYNTAX      TmnxCellularSimCardEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a SIM card for a cellular port in the
         system. Entries are automatically created by the system, and cannot be
         created or deleted via SNMP SET operations.

         The system creates an entry for each possible SIM card that can
         be installed into the system.  Each SIM card is associated with a
         specific cellular port in the system."
    INDEX       {
        tmnxPortPortID,
        tmnxCellSimCardId
    }
    ::= { tmnxCellularSimCardTable 1 }

TmnxCellularSimCardEntry         ::= SEQUENCE
{
    tmnxCellSimCardId                TmnxCellularSimCardNumber,
    tmnxCellSimCardLastChanged       TimeStamp,
    tmnxCellSimCardDescription       TItemDescription,
    tmnxCellSimCardPin               OCTET STRING,
    tmnxCellSimCardFailureDuration   Unsigned32,
    tmnxCellSimCardPortStateSwitch   TruthValue,
    tmnxCellSimCardBgpStateSwitch    TruthValue
}

tmnxCellSimCardId                OBJECT-TYPE
    SYNTAX      TmnxCellularSimCardNumber
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardId specifies a SIM card on a cellular
         port."
    ::= { tmnxCellularSimCardEntry 1 }

tmnxCellSimCardLastChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to this table row."
    ::= { tmnxCellularSimCardEntry 2 }

tmnxCellSimCardDescription       OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardDescription specifies a user provided
         description for this SIM card."
    DEFVAL      { ''H }
    ::= { tmnxCellularSimCardEntry 3 }

tmnxCellSimCardPin               OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0|4..8))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardPin specifies the Personal
         Identification Number of the SIM card.  This is required
         in order to access a locked SIM card.

         A get request on this object always returns an empty string."
    DEFVAL      { ''H }
    ::= { tmnxCellularSimCardEntry 4 }

tmnxCellSimCardFailureDuration   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "minutes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardFailureDuration specifies the amount or
         time that the system will wait before switching SIM cards.

         The system will only automatically switch SIM cards if
         tmnxCellMdaAdminActiveSim is set to 'automatic', and
         if the failover criteria is met.  The value of
         tmnxCellSimCardPortStateSwitch and tmnxCellSimCardBgpStateSwitch
         control the failover criteria."
    DEFVAL      { 5 }
    ::= { tmnxCellularSimCardEntry 5 }

tmnxCellSimCardPortStateSwitch   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardPortStateSwitch specifies whether or not
         the system will automatically switch to the other SIM card if the port
         corresponding to this SIM card remains operationally down for the
         duration specified by tmnxCellSimCardFailureDuration.

         The system will only automatically switch SIM cards if
         tmnxCellMdaAdminActiveSim is set to 'automatic'.

         At least one of the SIM switch criteria tmnxCellSimCardPortStateSwitch
         or tmnxCellSimCardBgpStateSwitch must be enabled for a given SIM card."
    DEFVAL      { true }
    ::= { tmnxCellularSimCardEntry 6 }

tmnxCellSimCardBgpStateSwitch    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardBgpStateSwitch specifies whether or not
         the system will automatically switch to the other SIM card if all BGP
         sessions corresponding to this SIM card are not established for the
         duration specified by tmnxCellSimCardFailureDuration.

         The system will only automatically switch SIM cards if
         tmnxCellMdaAdminActiveSim is set to 'automatic'.

         At least one of the SIM switch criteria tmnxCellSimCardPortStateSwitch
         or tmnxCellSimCardBgpStateSwitch must be enabled for a given SIM card."
    DEFVAL      { false }
    ::= { tmnxCellularSimCardEntry 7 }

tmnxCellularPdnTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularPdnEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularPdnTable has a series of configurations for Packet
         Data Networks (PDNs), which are configured against a cellular port and
         associated with a specific SIM card."
    ::= { tmnxCellularPortConfigObjs 2 }

tmnxCellularPdnEntry             OBJECT-TYPE
    SYNTAX      TmnxCellularPdnEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a specific Packet Data Network.

         A Packet Data Network is associated with a specific cellular port and
         SIM card.

         Entries can be created and deleted via SNMP SET operations."
    INDEX       {
        tmnxPortPortID,
        tmnxCellPdnId
    }
    ::= { tmnxCellularPdnTable 1 }

TmnxCellularPdnEntry             ::= SEQUENCE
{
    tmnxCellPdnId                    TmnxCellularPdnId,
    tmnxCellPdnRowStatus             RowStatus,
    tmnxCellPdnLastChanged           TimeStamp,
    tmnxCellPdnProfile               TmnxCellularPdnProfileId
}

tmnxCellPdnId                    OBJECT-TYPE
    SYNTAX      TmnxCellularPdnId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnId specifies a Packet Data Network on a
         cellular port."
    ::= { tmnxCellularPdnEntry 1 }

tmnxCellPdnRowStatus             OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnRowStatus specifies the row status of the PDN
         entry.  It is used to control the creation and deletion of Packet Data
         Networks on a cellular port."
    ::= { tmnxCellularPdnEntry 2 }

tmnxCellPdnLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to this table row."
    ::= { tmnxCellularPdnEntry 3 }

tmnxCellPdnProfile               OBJECT-TYPE
    SYNTAX      TmnxCellularPdnProfileId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnProfile specifies the PDN profile that
         is associated with this Packet Data Network.  The configuration of a
         PDN is contained corresponding table row of
         tmnxCellularPdnProfileTable."
    DEFVAL      { 0 }
    ::= { tmnxCellularPdnEntry 4 }

tmnxCellularPortTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularPortTable has an entry for each cellular port in the
         system."
    ::= { tmnxCellularPortConfigObjs 3 }

tmnxCellularPortEntry            OBJECT-TYPE
    SYNTAX      TmnxCellularPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a cellular port in the system. Entries are
         automatically created by the system, and cannot be created or deleted
         via SNMP SET operations."
    INDEX       { tmnxPortPortID }
    ::= { tmnxCellularPortTable 1 }

TmnxCellularPortEntry            ::= SEQUENCE
{
    tmnxCellPortLastChanged          TimeStamp,
    tmnxCellPortBand125MaxPowerLevel Unsigned32,
    tmnxCellPortSyncSysTime          TruthValue
}

tmnxCellPortLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to this table row."
    ::= { tmnxCellularPortEntry 1 }

tmnxCellPortBand125MaxPowerLevel OBJECT-TYPE
    SYNTAX      Unsigned32 (1..20)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBand125MaxPowerLevel specifies the maximum
         power level that may be transmitted by the band 125 LTE radio on some
         variants of the SAR-Hm.

         A value of 1 specifies that the radio may transmit at its maximum
         power level.  Higher values reduce the maximum transmitted power
         level of the band 125 radio, with a value of 20 specifying the lowest
         maximum power level."
    REFERENCE
        "7705 SAR-Hm, Release 15.0.R4, 'SAR-Hm Chassis Installation Guide',
         Nokia, October 2017, Section 4.9 'Site Preparation and Engineering
         Guidelines for 7705 SAR-Hm B125 Antennas'"
    DEFVAL      { 1 }
    ::= { tmnxCellularPortEntry 2 }

tmnxCellPortSyncSysTime          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortSyncSysTime specifies whether the system time
         is synchronized on the cellular port."
    DEFVAL      { false }
    ::= { tmnxCellularPortEntry 3 }

tmnxCellularMdaTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularMdaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularMdaTable has an entry for each cellular MDA in the
         system."
    ::= { tmnxCellularPortConfigObjs 4 }

tmnxCellularMdaEntry             OBJECT-TYPE
    SYNTAX      TmnxCellularMdaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a cellular MDA in the system. Entries are
         automatically created by the system, and cannot be created or deleted
         via SNMP SET operations."
    INDEX       {
        tmnxCardSlotNum,
        tmnxMDASlotNum
    }
    ::= { tmnxCellularMdaTable 1 }

TmnxCellularMdaEntry             ::= SEQUENCE
{
    tmnxCellMdaLastChanged           TimeStamp,
    tmnxCellMdaAdminActiveSim        INTEGER,
    tmnxCellMdaDownResetInterval     Unsigned32,
    tmnxCellMdaDownResetCriteria     BITS,
    tmnxCellMdaDownResetPending      TruthValue,
    tmnxCellMdaDownResetTime         Unsigned32,
    tmnxCellMdaPreferredSim          TmnxCellularSimCardNumber,
    tmnxCellMdaOperActiveSim         TmnxCellularSimCardNumber,
    tmnxCellMdaSimCardSwitchPending  TruthValue,
    tmnxCellMdaSimCardSwitchTime     Unsigned32,
    tmnxCellMdaSimCardLastSwitchTime TimeStamp,
    tmnxCellMdaSimLastSwitchReason   INTEGER,
    tmnxCellMdaSpecFirmwareVersion   DisplayString,
    tmnxCellMdaMaxTxPower            Integer32
}

tmnxCellMdaLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to this table row."
    ::= { tmnxCellularMdaEntry 1 }

tmnxCellMdaAdminActiveSim        OBJECT-TYPE
    SYNTAX      INTEGER {
        sim-1     (1),
        sim-2     (2),
        automatic (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaAdminActiveSim specifies which SIM card shall
         be active on the MDA.

         A value of 'sim-1' or 'sim-2' specifies that the system will use the SIM card
         in that slot as the active SIM card.   If there is no SIM card in that
         slot, or if the system cannot establish service using that SIM card, the
         system will continue to use that SIM card, regardless of the contents of
         the other SIM card slot.

         A value of 'automatic' specifies that the system will automatically
         switch between SIM cards if it cannot establish service."
    DEFVAL      { sim-1 }
    ::= { tmnxCellularMdaEntry 2 }

tmnxCellMdaDownResetInterval     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..240)
    UNITS       "minutes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaDownResetInterval specifies the interval, in
         minutes, after which the system will reset if it cannot establish
         service over the cellular interface.

         A value of 0 specifies that the system will not reset if it cannot
         establish service over the cellular interface."
    DEFVAL      { 0 }
    ::= { tmnxCellularMdaEntry 3 }

tmnxCellMdaDownResetCriteria     OBJECT-TYPE
    SYNTAX      BITS {
        port (0),
        bgp  (1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaDownResetCriteria specifies the criteria to
         decide whether or not service is operational over the cellular
         interface.

         If the 'port' bit is set, cellular service is deemed inoperational if
         no cellular port is operationally up.

         If the 'bgp' bit is set, cellular service is deemed inoperational if
         there is no BGP peer established with a configured local address
         corresponding to a cellular interface.

         Multiple bits may be set simultaneously.  If so, the system evaluates
         each criterion independently."
    DEFVAL      { { port } }
    ::= { tmnxCellularMdaEntry 4 }

tmnxCellMdaDownResetPending      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaDownResetPending indicates if the current
         state of the system will cause the system to reset, due to the
         criteria configured by tmnxCellMdaDownResetCriteria.

         If the system remains in this state for the duration indicated by
         tmnxCellMdaDownResetInterval, it will automatically reset.

         This value will only be true if tmnxCellMdaDownResetInterval is
         configured to a non-zero value."
    ::= { tmnxCellularMdaEntry 5 }

tmnxCellMdaDownResetTime         OBJECT-TYPE
    SYNTAX      Unsigned32 (0..14400)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaDownResetTime indicates the amount of time
         remaining before the system will reset, due to the criteria specified
         by tmnxCellMdaDownResetCriteria.

         If tmnxCellMdaDownResetPending is false, tmnxCellMdaDownResetTime will
         have a value of 0."
    ::= { tmnxCellularMdaEntry 6 }

tmnxCellMdaPreferredSim          OBJECT-TYPE
    SYNTAX      TmnxCellularSimCardNumber
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaPreferredSim specifies which SIM card shall be
         used as the active SIM upon system initialization when
         tmnxCellMdaAdminActiveSim is set to 'automatic'."
    DEFVAL      { 1 }
    ::= { tmnxCellularMdaEntry 7 }

tmnxCellMdaOperActiveSim         OBJECT-TYPE
    SYNTAX      TmnxCellularSimCardNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaOperActiveSim indicates which SIM card is
         active on the MDA."
    ::= { tmnxCellularMdaEntry 8 }

tmnxCellMdaSimCardSwitchPending  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaSimCardSwitchPending indicates if the current
         state of the system will cause a SIM switch.

         If the system remains in this state for the duration indicated by
         tmnxCellMdaSimCardSwitchTime, it will automatically switch the MDA to
         use the other SIM card.

         This value will only be true if tmnxCellMdaAdminActiveSim is set to
         'automatic'."
    ::= { tmnxCellularMdaEntry 9 }

tmnxCellMdaSimCardSwitchTime     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..3600)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaSimCardSwitchTime indicates the amount of time
         remaining before the system will automatically switch SIM cards if the
         system remains in its current state.

         If tmnxCellMdaSimCardSwitchPending is false,
         tmnxCellMdaSimCardSwitchTime will have a value of 0."
    ::= { tmnxCellularMdaEntry 10 }

tmnxCellMdaSimCardLastSwitchTime OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaSimCardLastSwitchTime indicates the value of
         sysUpTime the last time that the system switched the operationally
         active SIM card on the cellular MDA.

         If the system has not switched the active SIM card,
         tmnxCellMdaSimCardLastSwitchTime will have a value of 0."
    ::= { tmnxCellularMdaEntry 11 }

tmnxCellMdaSimLastSwitchReason   OBJECT-TYPE
    SYNTAX      INTEGER {
        none                 (0),
        manual-configuration (1),
        forced-switch        (2),
        cellular-port-down   (3),
        no-bgp-neighbor      (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaSimLastSwitchReason indicates the reason why
         the system last switched the operationally active SIM card on the
         cellular MDA.

         If the system has not switched the active SIM card,
         tmnxCellMdaSimLastSwitchReason will have a value of 'none'."
    ::= { tmnxCellularMdaEntry 12 }

tmnxCellMdaSpecFirmwareVersion   OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaSpecFirmwareVersion indicates the firmware
         version that the system is configured to use on the cellular modem.

         An empty string indicates that the user has not specified that the
         system should use different modem firmware than the version that is
         bundled within SROS."
    ::= { tmnxCellularMdaEntry 13 }

tmnxCellMdaMaxTxPower            OBJECT-TYPE
    SYNTAX      Integer32 (1..23)
    UNITS       "decibel-milliwatts"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaMaxTxPower specifies the maximum transmit
         power of the cellular interface on the MDA.  This object only applies
         to platforms with cellular interfaces that support Citizen's Broadband
         Radio Service (CBRS) frequency bands.  On those platforms, this value
         specifies the maximum transmit power regardless of the frequency band.
         On platforms that do not support CBRS frequency bands, the value of
         tmnxCellMdaMaxTxPower has no effect."
    DEFVAL      { 23 }
    ::= { tmnxCellularMdaEntry 14 }

tmnxCellPortCbsdAuthCfgTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellPortCbsdAuthCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellPortCbsdAuthCfgTable has an entry for each cellular port
         in the system pertaining to CBSD authorization configuration."
    ::= { tmnxCellularPortConfigObjs 5 }

tmnxCellPortCbsdAuthCfgEntry     OBJECT-TYPE
    SYNTAX      TmnxCellPortCbsdAuthCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents the CBSD authorization configuration for a
         cellular port in the system. Entries are automatically created by the
         system, and cannot be created or deleted via SNMP SET operations."
    AUGMENTS    { tmnxCellularPortEntry }
    ::= { tmnxCellPortCbsdAuthCfgTable 1 }

TmnxCellPortCbsdAuthCfgEntry     ::= SEQUENCE
{
    tmnxCellPortCbsdAuthCfgLstChange TimeStamp,
    tmnxCellPortCbsdAuthAdminState   TmnxEnabledDisabledAdminState,
    tmnxCellPortCbsdAuthUserId       DisplayString,
    tmnxCellPortCbsdAuthAntennaGain  Unsigned32,
    tmnxCellPortCbsdAuthClntTlsProf  TNamedItemOrEmpty,
    tmnxCellPortCbsdAuthPriSasSvrUrl DisplayString,
    tmnxCellPortCbsdAuthSecSasSvrUrl DisplayString,
    tmnxCellPortCbsdAuthCategory     INTEGER
}

tmnxCellPortCbsdAuthCfgLstChange OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthCfgLstChange indicates the sysUpTime
         at the time of the most recent management-initiated change to this
         table row."
    ::= { tmnxCellPortCbsdAuthCfgEntry 1 }

tmnxCellPortCbsdAuthAdminState   OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabledAdminState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthAdminState specifies the
         administrative state of the CBSD authorization for the cellular port."
    DEFVAL      { disabled }
    ::= { tmnxCellPortCbsdAuthCfgEntry 2 }

tmnxCellPortCbsdAuthUserId       OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..253))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthUserId specifies the CBSD
         authorization user ID for the cellular port."
    DEFVAL      { "" }
    ::= { tmnxCellPortCbsdAuthCfgEntry 3 }

tmnxCellPortCbsdAuthAntennaGain  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..14)
    UNITS       "decibel-milliwatts"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthAntennaGain specifies the CBSD
         authorization antenna gain for the cellular port."
    DEFVAL      { 0 }
    ::= { tmnxCellPortCbsdAuthCfgEntry 4 }

tmnxCellPortCbsdAuthClntTlsProf  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthClntTlsProf specifies the CBSD
         authorization client TLS profile name for the cellular port."
    DEFVAL      { "" }
    ::= { tmnxCellPortCbsdAuthCfgEntry 5 }

tmnxCellPortCbsdAuthPriSasSvrUrl OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthPriSasSvrUrl specifies the CBSD
         authorization primary SAS server for the cellular port."
    DEFVAL      { "" }
    ::= { tmnxCellPortCbsdAuthCfgEntry 6 }

tmnxCellPortCbsdAuthSecSasSvrUrl OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthSecSasSvrUrl specifies the CBSD
         authorization secondary SAS server for the cellular port."
    DEFVAL      { "" }
    ::= { tmnxCellPortCbsdAuthCfgEntry 7 }

tmnxCellPortCbsdAuthCategory     OBJECT-TYPE
    SYNTAX      INTEGER {
        a (1),
        b (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthCategory specifies the CBSD
         authorization category."
    DEFVAL      { a }
    ::= { tmnxCellPortCbsdAuthCfgEntry 8 }

tmnxCellularStatusObjs           OBJECT IDENTIFIER ::= { tmnxCellularObjs 3 }

tmnxCellularPortStatusObjs       OBJECT IDENTIFIER ::= { tmnxCellularStatusObjs 1 }

tmnxCellularPortStatusTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularPortStatusTable has an entry for each cellular port in
         the system."
    ::= { tmnxCellularPortStatusObjs 1 }

tmnxCellularPortStatusEntry      OBJECT-TYPE
    SYNTAX      TmnxCellularPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a cellular port in the system.  Entries
         are automatically created by the system, and cannot be created or
         deleted via SNMP SET operations.

         The tmnxCellularPortStatusEntry contains attributes that are unique to
         the Cellular TmnxPortType."
    INDEX       { tmnxPortPortID }
    ::= { tmnxCellularPortStatusTable 1 }

TmnxCellularPortStatusEntry      ::= SEQUENCE
{
    tmnxCellPortImei                 TmnxCellularImei,
    tmnxCellPortRegistrationStatus   INTEGER,
    tmnxCellPortWirelessTechnology   INTEGER,
    tmnxCellPortFrequencyBand        Unsigned32,
    tmnxCellPortChannelNumber        TmnxCellularChannelNumber,
    tmnxCellPortAreaCode             DisplayString,
    tmnxCellPortCellIdentity         DisplayString,
    tmnxCellPortRssi                 Integer32,
    tmnxCellPortRsrp                 Integer32,
    tmnxCellPortRscp                 Integer32,
    tmnxCellPortRsrq                 Integer32,
    tmnxCellPortSinr                 Integer32
}

tmnxCellPortImei                 OBJECT-TYPE
    SYNTAX      TmnxCellularImei
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortImei indicates the International Mobile
         Station Equipment Identity number assigned to this cellular port."
    ::= { tmnxCellularPortStatusEntry 1 }

tmnxCellPortRegistrationStatus   OBJECT-TYPE
    SYNTAX      INTEGER {
        not-registered             (0),
        registered-home            (1),
        searching                  (2),
        denied                     (3),
        no-network                 (4),
        registered-roaming         (5),
        sms-only-home              (6),
        sms-only-roaming           (7),
        emergency-only             (8),
        csfb-not-preferred-home    (9),
        csfb-not-preferred-roaming (10)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortRegistrationStatus indicates the Evolved
         Packet System (EPS) network registration status of the cellular port."
    REFERENCE
        "3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project;
         Technical Specification Group Core Network and Terminals; AT command
         set for User Equipment (UE)', 3GPP, December 2016, Section 10.1.22,
         'EPS network registration status +CEREG'"
    ::= { tmnxCellularPortStatusEntry 2 }

tmnxCellPortWirelessTechnology   OBJECT-TYPE
    SYNTAX      INTEGER {
        none  (0),
        lte   (1),
        wcdma (2),
        gsm   (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortWirelessTechnology indicates the wireless
         technology currently in use on the cellular port."
    ::= { tmnxCellularPortStatusEntry 3 }

tmnxCellPortFrequencyBand        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortFrequencyBand indicates the frequency band
         currently in use by the cellular port.

         For LTE, this is an E-UTRA Operating Band, as listed in Table 5.5-1 of
         3GPP TS 36.101."
    REFERENCE
        "3GPP TS 36.101 version 14.1.0 (2016-09), '3rd Generation
         Partnership Project; Technical Specification Group Radio Access
         Network; Evolved Universal Terrestrial Radio Access (E-UTRA);
         User Equipment (UE) radio transmission and reception,
         3GPP, September 2016, Table 5.5-1, 'E-UTRA operating bands'"
    ::= { tmnxCellularPortStatusEntry 4 }

tmnxCellPortChannelNumber        OBJECT-TYPE
    SYNTAX      TmnxCellularChannelNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortChannelNumber indicates the channel number
         currently in use."
    ::= { tmnxCellularPortStatusEntry 5 }

tmnxCellPortAreaCode             OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..4))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortAreaCode indicates the tracking area code or
         location area code currently in use."
    REFERENCE
        "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Core Network
         and Terminals; Numbering, addressing and identification',
         3GPP, June 2016, Section 19.4.2.3 'Tracking Area Identity (TAI)';
         Section 4.1, 'Composition of the Location Area Identification (LAI)'"
    ::= { tmnxCellularPortStatusEntry 6 }

tmnxCellPortCellIdentity         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCellIdentity indicates the
         GERAN/UTRAN/E-UTRAN cell identity of the cell currently in use."
    REFERENCE
        "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Core Network
         and Terminals; Numbering, addressing and identification',
         3GPP, June 2016, Section 4.3.1 'Cell Identity (CI) and Cell Global
         Identification (CGI)'"
    ::= { tmnxCellularPortStatusEntry 7 }

tmnxCellPortRssi                 OBJECT-TYPE
    SYNTAX      Integer32 (-113..-51 | 0)
    UNITS       "decibel-milliwatts"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortRssi indicates the received signal strength,
         in decibel-milliwatts.

         A value of -113 indicates that the signal strength is -113 dBm or
         less, while a value of -51 indicates that the signal strength is -51
         dBm or greater.

         A value of 0 indicates that the signal strength is not known or not
         detectable."
    ::= { tmnxCellularPortStatusEntry 8 }

tmnxCellPortRsrp                 OBJECT-TYPE
    SYNTAX      Integer32 (-140..-44 | 0)
    UNITS       "decibel-milliwatts"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortRsrp indicates the reference signal received
         power, in decibel-milliwatts.

         A value of -140 indicates that the received power is -140 dBm or less,
         while a value of -44 indicates that the received power is -44 dBm or
         greater.

         A value of 0 indicates that the reference signal received power has
         not been measured."
    REFERENCE
        "3GPP TS 36.133 version 14.3.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Radio
         Access Network; Evolved Universal Terrestrial Radio Access
         (E-UTRA); Requirements for support of radio resource management',
         3GPP, March 2017, Section 9.1.4 'RSRP Measurement Report Mapping'"
    ::= { tmnxCellularPortStatusEntry 9 }

tmnxCellPortRscp                 OBJECT-TYPE
    SYNTAX      Integer32 (-120..-25 | 0)
    UNITS       "decibel-milliwatts"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortRscp indicates the received signal code
         power, in decibel-milliwatts.

         A value of -120 indicates that the received power is -120 dBm or less,
         while a value of -25 indicates that the received power is -25 dBm or
         greater.

         A value of 0 indicates that the received signal code power is not
         known or not detectable."
    REFERENCE
        "3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project;
         Technical Specification Group Core Network and Terminals; AT command
         set for User Equipment (UE)', 3GPP, December 2016, Section 8.69,
         'Extended signal quality +CESQ'"
    ::= { tmnxCellularPortStatusEntry 10 }

tmnxCellPortRsrq                 OBJECT-TYPE
    SYNTAX      Integer32 (-20..-3 | 0)
    UNITS       "decibel"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortRsrq indicates the reference signal received
         quality, in decibel.

         A value of -20 indicates that the received signal quality is
         -20 dB or less, while a value of -3 indicates that the
         received signal quality is -3 dB or greater.

         A value of 0 indicates that the reference signal received quality has
         not been measured."
    REFERENCE
        "3GPP TS 36.133 version 14.3.0 Release 14, '3rd Generation
         Partnership Project; Technical Specification Group Radio
         Access Network; Evolved Universal Terrestrial Radio Access
         (E-UTRA); Requirements for support of radio resource management',
         3GPP, March 2017, Section 9.1.7 'RSRQ Measurement Report Mapping'"
    ::= { tmnxCellularPortStatusEntry 11 }

tmnxCellPortSinr                 OBJECT-TYPE
    SYNTAX      Integer32 (-200..400)
    UNITS       "0.1 decibel"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortSinr indicates the signal to interface and
         noise ratio, in tenths of decibel.

         A value of -200 indicates that the signal to noise and  interface
         ratio is -20 dB or less, while a value of 400 indicates that the
         signal to noise and interface ratio is 40 dB or greater."
    ::= { tmnxCellularPortStatusEntry 12 }

tmnxCellularSimCardStatusTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularSimCardStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularSimCardStatusTable has an entry for each SIM card in
         the system."
    ::= { tmnxCellularPortStatusObjs 3 }

tmnxCellularSimCardStatusEntry   OBJECT-TYPE
    SYNTAX      TmnxCellularSimCardStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a SIM card in the system.  Entries
         are automatically created by the system, and cannot be created or
         deleted via SNMP SET operations."
    AUGMENTS    { tmnxCellularSimCardEntry }
    ::= { tmnxCellularSimCardStatusTable 1 }

TmnxCellularSimCardStatusEntry   ::= SEQUENCE
{
    tmnxCellSimCardEquipped          TruthValue,
    tmnxCellSimCardIccid             TmnxCellularSimCardIccid,
    tmnxCellSimCardImsi              TmnxCellularImsi,
    tmnxCellSimCardLocked            TruthValue,
    tmnxCellSimCardPinStatus         INTEGER,
    tmnxCellSimCardPinRetries        Unsigned32,
    tmnxCellSimCardPukRetries        Unsigned32,
    tmnxCellSimCardFirmwareVersion   DisplayString
}

tmnxCellSimCardEquipped          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardEquipped indicates whether or not the SIM
         card is installed in the system."
    ::= { tmnxCellularSimCardStatusEntry 1 }

tmnxCellSimCardIccid             OBJECT-TYPE
    SYNTAX      TmnxCellularSimCardIccid
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardIccid indicates the International
         Integrated Circuit Card Identifier assigned to this SIM card by the
         manufacturer."
    ::= { tmnxCellularSimCardStatusEntry 2 }

tmnxCellSimCardImsi              OBJECT-TYPE
    SYNTAX      TmnxCellularImsi
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardImsi indicates the International Mobile
         Subscriber Identity (IMSI) assigned to the SIM card."
    ::= { tmnxCellularSimCardStatusEntry 3 }

tmnxCellSimCardLocked            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardLocked indicates whether the SIM card is
         locked and requires a PIN."
    ::= { tmnxCellularSimCardStatusEntry 4 }

tmnxCellSimCardPinStatus         OBJECT-TYPE
    SYNTAX      INTEGER {
        unknown         (0),
        waiting-for-pin (1),
        waiting-for-puk (2),
        ready           (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardPinStatus indicates whether the SIM card
         is waiting for a password, which could be either the PIN or the PIN
         Unlock Key (PUK)."
    REFERENCE
        "3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project;
         Technical Specification Group Core Network and Terminals; AT command
         set for User Equipment (UE)', 3GPP, December 2016, Section 8.3,
         'Enter PIN +CPIN'"
    ::= { tmnxCellularSimCardStatusEntry 5 }

tmnxCellSimCardPinRetries        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardPinRetries indicates the number of
         remaining times the PIN can be attempted before the SIM card will be
         locked and require a PIN Unlock Key (PUK) to unlock."
    ::= { tmnxCellularSimCardStatusEntry 6 }

tmnxCellSimCardPukRetries        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardPukRetries indicates the number of
         remaining times the PIN Unlock Key (PUK) can be attempted before the
         SIM card is rendered inoperational."
    ::= { tmnxCellularSimCardStatusEntry 7 }

tmnxCellSimCardFirmwareVersion   OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellSimCardFirmwareVersion indicates the firmware
         version that the system will use on the cellular modem when this SIM
         card is the active sim card.

         If the user has not specified a version of firmware to use with a SIM
         card, tmnxCellSimCardFirmwareVersion has a value of an empty string."
    ::= { tmnxCellularSimCardStatusEntry 8 }

tmnxCellularPdnStatusTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularPdnStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularPdnStatusTable has an entry for each cellular Packet
         Data Network in the system."
    ::= { tmnxCellularPortStatusObjs 4 }

tmnxCellularPdnStatusEntry       OBJECT-TYPE
    SYNTAX      TmnxCellularPdnStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a cellular PDN in the system.  Entries
         are automatically created by the system, and cannot be created or
         deleted via SNMP SET operations."
    AUGMENTS    { tmnxCellularPdnEntry }
    ::= { tmnxCellularPdnStatusTable 1 }

TmnxCellularPdnStatusEntry       ::= SEQUENCE
{
    tmnxCellPdnConnectionState       INTEGER,
    tmnxCellPdnIpAddrType            InetAddressType,
    tmnxCellPdnIpAddress             InetAddress,
    tmnxCellPdnPrimaryDnsAddrType    InetAddressType,
    tmnxCellPdnPrimaryDnsAddress     InetAddress,
    tmnxCellPdnSecondaryDnsAddrType  InetAddressType,
    tmnxCellPdnSecondaryDnsAddress   InetAddress,
    tmnxCellPdnApn                   TmnxCellularAccessPointName,
    tmnxCellPdnMtu                   Unsigned32
}

tmnxCellPdnConnectionState       OBJECT-TYPE
    SYNTAX      INTEGER {
        notConnected (0),
        connected    (1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnConnectionState indicates whether or not the
         packet data network connection has been successfully established."
    ::= { tmnxCellularPdnStatusEntry 1 }

tmnxCellPdnIpAddrType            OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnIpAddrType indicates, along with
         tmnxCellPdnIpAddress, the IP address assigned to the PDN by the
         cellular network."
    ::= { tmnxCellularPdnStatusEntry 2 }

tmnxCellPdnIpAddress             OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnIpAddress indicates, along with
         tmnxCellPdnIpAddrType, the IP address assigned to the PDN by the
         cellular network."
    ::= { tmnxCellularPdnStatusEntry 3 }

tmnxCellPdnPrimaryDnsAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnPrimaryDnsAddrType indicates, along with
         tmnxCellPdnPrimaryDnsAddress, the IP address assigned of the primary
         DNS server in the PDN."
    ::= { tmnxCellularPdnStatusEntry 4 }

tmnxCellPdnPrimaryDnsAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnPrimaryDnsAddress indicates, along with
         tmnxCellPdnPrimaryDnsAddrType, the IP address assigned of the primary
         DNS server in the PDN."
    ::= { tmnxCellularPdnStatusEntry 5 }

tmnxCellPdnSecondaryDnsAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnSecondaryDnsAddrType indicates, along with
         tmnxCellPdnSecondaryDnsAddress, the IP address assigned of the
         secondary DNS server in the PDN."
    ::= { tmnxCellularPdnStatusEntry 6 }

tmnxCellPdnSecondaryDnsAddress   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnSecondaryDnsAddress indicates, along with
         tmnxCellPdnSecondaryDnsAddrType, the IP address assigned of the
         secondary DNS server in the PDN."
    ::= { tmnxCellularPdnStatusEntry 7 }

tmnxCellPdnApn                   OBJECT-TYPE
    SYNTAX      TmnxCellularAccessPointName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnApn indicates the APN in use by the PDN."
    ::= { tmnxCellularPdnStatusEntry 8 }

tmnxCellPdnMtu                   OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bytes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPdnMtu indicates the operational value of the IP
         MTU on this PDN."
    ::= { tmnxCellularPdnStatusEntry 9 }

tmnxCellularPortBearerTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularPortBearerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularPortBearerTable has an entry for each bearer created
         on a cellular port in the system."
    ::= { tmnxCellularPortStatusObjs 5 }

tmnxCellularPortBearerEntry      OBJECT-TYPE
    SYNTAX      TmnxCellularPortBearerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a bearer created on a cellular port in the system.
         Entries are automatically created and deleted by the system as the cellular
         network creates and deletes bearers on the cellular port.  Entries cannot be
         created or deleted via SNMP SET operations."
    INDEX       {
        tmnxPortPortID,
        tmnxCellPortBearerId
    }
    ::= { tmnxCellularPortBearerTable 1 }

TmnxCellularPortBearerEntry      ::= SEQUENCE
{
    tmnxCellPortBearerId             Unsigned32,
    tmnxCellPortBearerType           INTEGER,
    tmnxCellPortBearerQci            Unsigned32,
    tmnxCellPortBearerUlGbr          TmnxCellularBearerRate,
    tmnxCellPortBearerUlMbr          TmnxCellularBearerRate,
    tmnxCellPortBearerDlGbr          TmnxCellularBearerRate,
    tmnxCellPortBearerDlMbr          TmnxCellularBearerRate
}

tmnxCellPortBearerId             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..15)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBearerId indicates the Evolved Packet System
         (EPS) Bearer Id of this bearer."
    REFERENCE
        "3GPP TS 23.401 version 11.11.0 Release 11, '3rd Generation Partnership Project;
         Technical Specification Group Core Services and System Aspects;
         General Packet Radio Service (GPRS) enhancements for Evolved Universal
         Terrestrial Radio Access Network (E-UTRAN) access', 3GPP, December 2014,
         Section 5.2.1, 'EPS bearer identity'"
    ::= { tmnxCellularPortBearerEntry 1 }

tmnxCellPortBearerType           OBJECT-TYPE
    SYNTAX      INTEGER {
        default   (1),
        dedicated (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBearerType indicates the type of this bearer."
    ::= { tmnxCellularPortBearerEntry 2 }

tmnxCellPortBearerQci            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..254)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBearerQci indicates the Quality of Service
         (QoS) Class Identifier of this bearer."
    REFERENCE
        "3GPP TS 23.401 version 11.11.0 Release 11, '3rd Generation Partnership Project;
         Technical Specification Group Core Services and System Aspects;
         General Packet Radio Service (GPRS) enhancements for Evolved Universal
         Terrestrial Radio Access Network (E-UTRAN) access', 3GPP, December 2014,
         Section 4.7.3, 'Bearer level QoS parameters'"
    ::= { tmnxCellularPortBearerEntry 3 }

tmnxCellPortBearerUlGbr          OBJECT-TYPE
    SYNTAX      TmnxCellularBearerRate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBearerUlGbr indicates the Guaranteed Bit Rate
         of the uplink for this bearer.  For a non-GBR bearer,
         tmnxCellPortBearerUlGbr has a value of zero."
    ::= { tmnxCellularPortBearerEntry 4 }

tmnxCellPortBearerUlMbr          OBJECT-TYPE
    SYNTAX      TmnxCellularBearerRate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBearerUlMbr indicates the Maximum Bit Rate
         of the uplink for this bearer.  For a non-GBR bearer,
         tmnxCellPortBearerUlMbr has a value of zero."
    ::= { tmnxCellularPortBearerEntry 5 }

tmnxCellPortBearerDlGbr          OBJECT-TYPE
    SYNTAX      TmnxCellularBearerRate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBearerDlGbr indicates the Guaranteed Bit Rate
         of the downlink for this bearer.  For a non-GBR bearer,
         tmnxCellPortBearerDlGbr has a value of zero."
    ::= { tmnxCellularPortBearerEntry 6 }

tmnxCellPortBearerDlMbr          OBJECT-TYPE
    SYNTAX      TmnxCellularBearerRate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortBearerDlMbr indicates the Maximum Bit Rate
         of the downlink for this bearer.  For a non-GBR bearer,
         tmnxCellPortBearerDlMbr has a value of zero."
    ::= { tmnxCellularPortBearerEntry 7 }

tmnxCellularPortTftTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellularPortTftEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellularPortTftTable contains information about the traffic
         flow templates (TFTs) created on the cellular port."
    ::= { tmnxCellularPortStatusObjs 6 }

tmnxCellularPortTftEntry         OBJECT-TYPE
    SYNTAX      TmnxCellularPortTftEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a packet filter created on a specific bearer.
         Entries are automatically created and deleted by the system as the cellular
         network creates and deletes bearers on the cellular port.  Entries cannot be
         created or deleted via SNMP SET operations."
    INDEX       {
        tmnxPortPortID,
        tmnxCellPortBearerId,
        tmnxCellPortTftPacketFilterId
    }
    ::= { tmnxCellularPortTftTable 1 }

TmnxCellularPortTftEntry         ::= SEQUENCE
{
    tmnxCellPortTftPacketFilterId    Unsigned32,
    tmnxCellPortTftEvalPrecedence    Unsigned32,
    tmnxCellPortTftDirection         INTEGER,
    tmnxCellPortTftTos               Unsigned32,
    tmnxCellPortTftTosMask           Unsigned32
}

tmnxCellPortTftPacketFilterId    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortTftPacketFilterId identifies a packet filter
         on a particular bearer."
    REFERENCE
        "3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project;
         Technical Specification Group Core Network and Terminals; AT command
         set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25,
         'Traffic flow template read dynamic parameters +CGTFTRDP'

         3GPP TS 24.008 version 11.17.1 Release 11, '3rd Generation Partnership Project;
         Technical Specification Group Core Network and Terminals;
         Mobile radio interface Layer 3 specification;
         Core network protocols; Stage 3', 3GPP, January 2018,
         Section 10.5.6.12, 'Traffic Flow Template'"
    ::= { tmnxCellularPortTftEntry 1 }

tmnxCellPortTftEvalPrecedence    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortTftEvalPrecedence indicates the evaluation
         precedence index of the packet filter."
    REFERENCE
        "3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project;
         Technical Specification Group Core Network and Terminals; AT command
         set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25,
         'Traffic flow template read dynamic parameters +CGTFTRDP'

         3GPP TS 23.060 version 11.12.0 Release 11, '3rd Generation Partnership Project;
         Technical Specification Group Services and System Aspects; General
         Packet Radio Service (GPRS); Service description; Stage 2', 3GPP, December 2014,
         Section 9.3, 'Packet Routeing and Transfer Function'"
    ::= { tmnxCellularPortTftEntry 2 }

tmnxCellPortTftDirection         OBJECT-TYPE
    SYNTAX      INTEGER {
        pre-release-7 (0),
        uplink        (1),
        downlink      (2),
        bidirectional (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortTftDirection indicates the direction to apply
         this packet filter."
    REFERENCE
        "3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project;
         Technical Specification Group Core Network and Terminals; AT command
         set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25,
         'Traffic flow template read dynamic parameters +CGTFTRDP'"
    ::= { tmnxCellularPortTftEntry 3 }

tmnxCellPortTftTos               OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortTftTos indicates, along with
         tmnxCellPortTftTosMask, the values of the IPv4 Type of Service (ToS)
         that match this packet filter."
    ::= { tmnxCellularPortTftEntry 4 }

tmnxCellPortTftTosMask           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortTftTosMask indicates, along with
         tmnxCellPortTftTos, the values of the IPv4 Type of Service (ToS) that
         match this packet filter."
    ::= { tmnxCellularPortTftEntry 5 }

tmnxCellPortCbsdAuthStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxCellPortCbsdAuthStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxCellPortCbsdAuthStatsTable has an entry for each cellular port
         in the system and pertains to CBSD authorization status and statistic
         information."
    ::= { tmnxCellularPortStatusObjs 7 }

tmnxCellPortCbsdAuthStatsEntry   OBJECT-TYPE
    SYNTAX      TmnxCellPortCbsdAuthStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents the CBSD authorization status and statistics
         information for a cellular port in the system. Entries are
         automatically created by the system, and cannot be created or deleted
         via SNMP SET operations."
    AUGMENTS    { tmnxCellPortCbsdAuthCfgEntry }
    ::= { tmnxCellPortCbsdAuthStatsTable 1 }

TmnxCellPortCbsdAuthStatsEntry   ::= SEQUENCE
{
    tmnxCellPortCbsdAuthOperState    TmnxEnabledDisabled,
    tmnxCellPortCbsdAuthId           DisplayString,
    tmnxCellPortCbsdAuthGrantId      DisplayString,
    tmnxCellPortCbsdAuthFccId        DisplayString,
    tmnxCellPortCbsdAuthRegState     INTEGER,
    tmnxCellPortCbsdAuthGrantState   INTEGER,
    tmnxCellPortCbsdAuthGrantExpTime DateAndTime,
    tmnxCellPortCbsdAuthTxExpTime    DateAndTime,
    tmnxCellPortCbsdAuthHeartbeatInt Unsigned32,
    tmnxCellPortCbsdAuthChanType     INTEGER,
    tmnxCellPortCbsdAuthCurSasSvr    INTEGER,
    tmnxCellPortCbsdAuthCurSasSvrIpT InetAddressType,
    tmnxCellPortCbsdAuthCurSasSvrIp  InetAddress,
    tmnxCellPortCbsdAuthRegRequest   Unsigned32,
    tmnxCellPortCbsdAuthRegRspSuc    Unsigned32,
    tmnxCellPortCbsdAuthRegRspFail   Unsigned32,
    tmnxCellPortCbsdAuthGrantRequest Unsigned32,
    tmnxCellPortCbsdAuthGrantRspSuc  Unsigned32,
    tmnxCellPortCbsdAuthGrantRspFail Unsigned32,
    tmnxCellPortCbsdAuthHrtbtRequest Unsigned32,
    tmnxCellPortCbsdAuthHrtbtRspSuc  Unsigned32,
    tmnxCellPortCbsdAuthHrtbtRspFail Unsigned32
}

tmnxCellPortCbsdAuthOperState    OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthOperState indicates the operational
         state of the CBSD authorization for the cellular port."
    ::= { tmnxCellPortCbsdAuthStatsEntry 1 }

tmnxCellPortCbsdAuthId           OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthId indicates the CBSD authorization
         identifier."
    ::= { tmnxCellPortCbsdAuthStatsEntry 2 }

tmnxCellPortCbsdAuthGrantId      OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthGrantId indicates the CBSD
         authorization grant identifier."
    ::= { tmnxCellPortCbsdAuthStatsEntry 3 }

tmnxCellPortCbsdAuthFccId        OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthFccId indicates the CBSD
         authorization Federal Communications Commission identifier."
    ::= { tmnxCellPortCbsdAuthStatsEntry 4 }

tmnxCellPortCbsdAuthRegState     OBJECT-TYPE
    SYNTAX      INTEGER {
        unregistered (0),
        registered   (1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthRegState indicates the CBSD
         authorization registration state."
    ::= { tmnxCellPortCbsdAuthStatsEntry 5 }

tmnxCellPortCbsdAuthGrantState   OBJECT-TYPE
    SYNTAX      INTEGER {
        idle       (1),
        granted    (2),
        authorized (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthGrantState indicates the CBSD
         authorization grant state."
    ::= { tmnxCellPortCbsdAuthStatsEntry 6 }

tmnxCellPortCbsdAuthGrantExpTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthGrantExpTime indicates the CBSD
         authorization time the grant will expire."
    ::= { tmnxCellPortCbsdAuthStatsEntry 7 }

tmnxCellPortCbsdAuthTxExpTime    OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthTxExpTime indicates the CBSD
         authorization time the transmission will expire."
    ::= { tmnxCellPortCbsdAuthStatsEntry 8 }

tmnxCellPortCbsdAuthHeartbeatInt OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthHeartbeatInt indicates the CBSD
         authorization heartbeat interval."
    ::= { tmnxCellPortCbsdAuthStatsEntry 9 }

tmnxCellPortCbsdAuthChanType     OBJECT-TYPE
    SYNTAX      INTEGER {
        gaa (1),
        pal (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthChanType indicates the CBSD
         authorization channel type."
    ::= { tmnxCellPortCbsdAuthStatsEntry 10 }

tmnxCellPortCbsdAuthCurSasSvr    OBJECT-TYPE
    SYNTAX      INTEGER {
        none      (0),
        primary   (1),
        secondary (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthCurSasSvr indicates the CBSD
         authorization SAS server that is currently being used."
    ::= { tmnxCellPortCbsdAuthStatsEntry 11 }

tmnxCellPortCbsdAuthCurSasSvrIpT OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthCurSasSvrIpT indicates the IP address
         type of the current SAS server being used in CBSD authorization ."
    ::= { tmnxCellPortCbsdAuthStatsEntry 12 }

tmnxCellPortCbsdAuthCurSasSvrIp  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthCurSasSvrIp indicates the IP address
         of the current SAS server being used in CBSD authorization ."
    ::= { tmnxCellPortCbsdAuthStatsEntry 13 }

tmnxCellPortCbsdAuthRegRequest   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthRegRequest indicates the number of
         CBSD authorization registration requests attempted."
    ::= { tmnxCellPortCbsdAuthStatsEntry 14 }

tmnxCellPortCbsdAuthRegRspSuc    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthRegRspSuc indicates the number of
         successful CBSD authorization registration responses."
    ::= { tmnxCellPortCbsdAuthStatsEntry 15 }

tmnxCellPortCbsdAuthRegRspFail   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthRegRspFail indicates the number of
         failed CBSD authorization registration responses."
    ::= { tmnxCellPortCbsdAuthStatsEntry 16 }

tmnxCellPortCbsdAuthGrantRequest OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthGrantRequest indicates the number of
         CBSD authorization grant requests attempted."
    ::= { tmnxCellPortCbsdAuthStatsEntry 17 }

tmnxCellPortCbsdAuthGrantRspSuc  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthGrantRspSuc indicates the number of
         successful CBSD authorization grant responses."
    ::= { tmnxCellPortCbsdAuthStatsEntry 18 }

tmnxCellPortCbsdAuthGrantRspFail OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthGrantRspFail indicates the number of
         failed CBSD authorization grant responses."
    ::= { tmnxCellPortCbsdAuthStatsEntry 19 }

tmnxCellPortCbsdAuthHrtbtRequest OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthHrtbtRequest indicates the number of
         CBSD authorization heartbeat requests."
    ::= { tmnxCellPortCbsdAuthStatsEntry 20 }

tmnxCellPortCbsdAuthHrtbtRspSuc  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthHrtbtRspSuc indicates the number of
         successful CBSD authorization heartbeat responses."
    ::= { tmnxCellPortCbsdAuthStatsEntry 21 }

tmnxCellPortCbsdAuthHrtbtRspFail OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellPortCbsdAuthHrtbtRspFail indicates the number of
         failed CBSD authorization heartbeat responses."
    ::= { tmnxCellPortCbsdAuthStatsEntry 22 }

tmnxCellularNotifyObjects        OBJECT IDENTIFIER ::= { tmnxCellularObjs 4 }

tmnxCellularNotifyPdnId          OBJECT-TYPE
    SYNTAX      TmnxCellularPdnId
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellularNotifyPdnId indicates the PDN for the
         notification."
    ::= { tmnxCellularNotifyObjects 1 }

tmnxCellMdaNoServiceResetReason  OBJECT-TYPE
    SYNTAX      INTEGER {
        cellular-port-down (1),
        no-bgp-neighbor    (2)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellMdaNoServiceResetReason indicates the specific
         reason why the system reset due to failure to establish service over
         the cellular interface."
    ::= { tmnxCellularNotifyObjects 2 }

tmnxCellCbsdAuthFailReason       OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..100))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellCbsdAuthFailReason indicates the specific reason
         why CBSD authorization request failed."
    ::= { tmnxCellularNotifyObjects 3 }

tmnxCellCbsdAuthRespCode         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..100))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellCbsdAuthRespCode indicates the CBSD authorization
         response code."
    ::= { tmnxCellularNotifyObjects 4 }

tmnxCellCbsdAuthPrevTransState   OBJECT-TYPE
    SYNTAX      INTEGER {
        idle       (1),
        authorized (2),
        granted    (3)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellCbsdAuthPrevTransState indicates the previous
         state when transitioning states during the CBSD authorization process."
    ::= { tmnxCellularNotifyObjects 5 }

tmnxCellCbsdAuthNewTransState    OBJECT-TYPE
    SYNTAX      INTEGER {
        idle       (1),
        authorized (2),
        granted    (3)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxCellCbsdAuthNewTransState indicates the new state
         when transitioning states during the CBSD authorization process."
    ::= { tmnxCellularNotifyObjects 6 }

tmnxCellularConformance          OBJECT IDENTIFIER ::= { tmnxSRConfs 109 }

tmnxCellularCompliances          OBJECT IDENTIFIER ::= { tmnxCellularConformance 1 }

tmnxCellularCompliance           MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the management of the cellular
         feature-set for Release 15.0 on Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxCellularConfigGroup,
            tmnxCellularStatusGroup
        }
    ::= { tmnxCellularCompliances 1 }

tmnxCellularComplianceV16v0      MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the management of the cellular
         feature-set for Release 16.0 on Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxCellularV16v0ConfigGroup,
            tmnxCellularV16v0StatusGroup,
            tmnxCellNotificationV16v0Group
        }
    ::= { tmnxCellularCompliances 2 }

tmnxCellularComplianceV19        MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the management of the cellular
         feature-set for Release 19 on Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxCellularV19ConfigGroup
        }
    ::= { tmnxCellularCompliances 3 }

tmnxCellularComplianceV20        MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the management of the cellular
         feature-set for Release 20 on Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxCellularV20ConfigGroup
        }
    ::= { tmnxCellularCompliances 4 }

tmnxCellularComplianceV21        MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the management of the cellular
         feature-set for Release 21 on Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxCellPortCbsdAuthGroupV21,
            tmnxCellularNotifyObjsGroupV21,
            tmnxCellNotificationGroupV21,
            tmnxCellularStatusGroupV21,
            tmnxCellularConfigGroupV21
        }
    ::= { tmnxCellularCompliances 5 }

tmnxCellularGroups               OBJECT IDENTIFIER ::= { tmnxCellularConformance 2 }

tmnxCellularV15v0Groups          OBJECT IDENTIFIER ::= { tmnxCellularGroups 1 }

tmnxCellularConfigGroup          OBJECT-GROUP
    OBJECTS     {
        tmnxCellPdnProfileTblLastChanged,
        tmnxCellPdnProfRowStatus,
        tmnxCellPdnProfLastChanged,
        tmnxCellPdnProfDescription,
        tmnxCellPdnProfApn,
        tmnxCellPdnProfAuthType,
        tmnxCellPdnProfUsername,
        tmnxCellPdnProfPassword,
        tmnxCellSimCardTableLastChanged,
        tmnxCellSimCardLastChanged,
        tmnxCellSimCardDescription,
        tmnxCellSimCardPin,
        tmnxCellPdnTblLastChanged,
        tmnxCellPdnRowStatus,
        tmnxCellPdnLastChanged,
        tmnxCellPdnProfile,
        tmnxCellPortTblLastChanged,
        tmnxCellPortLastChanged,
        tmnxCellPortBand125MaxPowerLevel
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port configuration on Nokia
         SROS series systems.  This group was introduced in Release 15.0."
    ::= { tmnxCellularV15v0Groups 1 }

tmnxCellularStatusGroup          OBJECT-GROUP
    OBJECTS     {
        tmnxCellPortImei,
        tmnxCellPortRegistrationStatus,
        tmnxCellPortWirelessTechnology,
        tmnxCellPortFrequencyBand,
        tmnxCellPortChannelNumber,
        tmnxCellPortAreaCode,
        tmnxCellPortCellIdentity,
        tmnxCellPortRssi,
        tmnxCellPortRsrp,
        tmnxCellPortRscp,
        tmnxCellSimCardEquipped,
        tmnxCellSimCardIccid,
        tmnxCellSimCardImsi,
        tmnxCellSimCardLocked,
        tmnxCellSimCardPinStatus,
        tmnxCellSimCardPinRetries,
        tmnxCellSimCardPukRetries,
        tmnxCellPdnConnectionState,
        tmnxCellPdnIpAddrType,
        tmnxCellPdnIpAddress,
        tmnxCellPdnPrimaryDnsAddrType,
        tmnxCellPdnPrimaryDnsAddress,
        tmnxCellPdnSecondaryDnsAddrType,
        tmnxCellPdnSecondaryDnsAddress,
        tmnxCellPdnApn,
        tmnxCellPdnMtu
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port status on Nokia
         SROS series systems.  This group was introduced in Release 15.0."
    ::= { tmnxCellularV15v0Groups 2 }

tmnxCellularV16v0Groups          OBJECT IDENTIFIER ::= { tmnxCellularGroups 2 }

tmnxCellularV16v0ConfigGroup     OBJECT-GROUP
    OBJECTS     {
        tmnxCellMdaLastChanged,
        tmnxCellMdaAdminActiveSim,
        tmnxCellMdaDownResetInterval,
        tmnxCellMdaDownResetCriteria,
        tmnxCellMdaDownResetPending,
        tmnxCellMdaDownResetTime,
        tmnxCellSimCardFailureDuration,
        tmnxCellSimCardPortStateSwitch,
        tmnxCellSimCardBgpStateSwitch
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port configuration on Nokia
         SROS series systems, introduced in Release 16.0."
    ::= { tmnxCellularV16v0Groups 1 }

tmnxCellularV16v0StatusGroup     OBJECT-GROUP
    OBJECTS     {
        tmnxCellPortBearerId,
        tmnxCellPortBearerType,
        tmnxCellPortBearerQci,
        tmnxCellPortBearerUlGbr,
        tmnxCellPortBearerUlMbr,
        tmnxCellPortBearerDlGbr,
        tmnxCellPortBearerDlMbr,
        tmnxCellPortTftPacketFilterId,
        tmnxCellPortTftEvalPrecedence,
        tmnxCellPortTftDirection,
        tmnxCellPortTftTos,
        tmnxCellPortTftTosMask,
        tmnxCellSimCardFirmwareVersion,
        tmnxCellMdaPreferredSim,
        tmnxCellMdaOperActiveSim,
        tmnxCellMdaSimCardSwitchPending,
        tmnxCellMdaSimCardSwitchTime,
        tmnxCellMdaSimCardLastSwitchTime,
        tmnxCellMdaSimLastSwitchReason
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining status of cellular ports on Nokia
         SROS series systems, introduced in Release 16.0."
    ::= { tmnxCellularV16v0Groups 2 }

tmnxCellularNotifyObjsGroup      OBJECT-GROUP
    OBJECTS     {
        tmnxCellularNotifyPdnId,
        tmnxCellMdaNoServiceResetReason
    }
    STATUS      current
    DESCRIPTION
        "The group of objects used in notifications generated on cellular ports
         on Nokia SROS series systems.  This group was introduced in Release 16.0."
    ::= { tmnxCellularV16v0Groups 3 }

tmnxCellNotificationV16v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxCellularBearerCreated,
        tmnxCellularBearerDeleted,
        tmnxCellularBearerModified,
        tmnxCellularNoServiceReset,
        tmnxCellularActiveSimChange
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications for cellular ports on Nokia SROS series
         systems, introduced in Release 16.0."
    ::= { tmnxCellularV16v0Groups 4 }

tmnxCellularV19Groups            OBJECT IDENTIFIER ::= { tmnxCellularGroups 3 }

tmnxCellularV19ConfigGroup       OBJECT-GROUP
    OBJECTS     {
        tmnxCellPdnProfProtocol
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port configuration on Nokia
         SROS series systems, introduced in Release 19."
    ::= { tmnxCellularV19Groups 1 }

tmnxCellularV20Groups            OBJECT IDENTIFIER ::= { tmnxCellularGroups 4 }

tmnxCellularV20ConfigGroup       OBJECT-GROUP
    OBJECTS     {
        tmnxCellMdaSpecFirmwareVersion,
        tmnxCellMdaMaxTxPower
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port configuration and
         status on Nokia SROS series systems, introduced in Release 20."
    ::= { tmnxCellularV20Groups 1 }

tmnxCellularV21Groups            OBJECT IDENTIFIER ::= { tmnxCellularGroups 5 }

tmnxCellPortCbsdAuthGroupV21     OBJECT-GROUP
    OBJECTS     {
        tmnxCellPortCbsdAuthCfgTblLstChg,
        tmnxCellPortCbsdAuthCfgLstChange,
        tmnxCellPortCbsdAuthAdminState,
        tmnxCellPortCbsdAuthUserId,
        tmnxCellPortCbsdAuthAntennaGain,
        tmnxCellPortCbsdAuthClntTlsProf,
        tmnxCellPortCbsdAuthPriSasSvrUrl,
        tmnxCellPortCbsdAuthSecSasSvrUrl,
        tmnxCellPortCbsdAuthOperState,
        tmnxCellPortCbsdAuthCategory,
        tmnxCellPortCbsdAuthId,
        tmnxCellPortCbsdAuthGrantId,
        tmnxCellPortCbsdAuthFccId,
        tmnxCellPortCbsdAuthRegState,
        tmnxCellPortCbsdAuthGrantState,
        tmnxCellPortCbsdAuthGrantExpTime,
        tmnxCellPortCbsdAuthTxExpTime,
        tmnxCellPortCbsdAuthHeartbeatInt,
        tmnxCellPortCbsdAuthChanType,
        tmnxCellPortCbsdAuthCurSasSvr,
        tmnxCellPortCbsdAuthCurSasSvrIp,
        tmnxCellPortCbsdAuthCurSasSvrIpT,
        tmnxCellPortCbsdAuthRegRequest,
        tmnxCellPortCbsdAuthRegRspSuc,
        tmnxCellPortCbsdAuthRegRspFail,
        tmnxCellPortCbsdAuthGrantRequest,
        tmnxCellPortCbsdAuthGrantRspSuc,
        tmnxCellPortCbsdAuthGrantRspFail,
        tmnxCellPortCbsdAuthHrtbtRequest,
        tmnxCellPortCbsdAuthHrtbtRspSuc,
        tmnxCellPortCbsdAuthHrtbtRspFail
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port CBSD authorization
         capabilities on Nokia SROS series systems, introduced in release 21."
    ::= { tmnxCellularV21Groups 1 }

tmnxCellularNotifyObjsGroupV21   OBJECT-GROUP
    OBJECTS     {
        tmnxCellCbsdAuthFailReason,
        tmnxCellCbsdAuthRespCode,
        tmnxCellCbsdAuthPrevTransState,
        tmnxCellCbsdAuthNewTransState
    }
    STATUS      current
    DESCRIPTION
        "The group of objects used in notifications generated on cellular ports
         Nokia SROS series systems, introduced in release 21."
    ::= { tmnxCellularV21Groups 2 }

tmnxCellNotificationGroupV21     NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxCellPortCbsdRegistered,
        tmnxCellPortCbsdUnregistered,
        tmnxCellPortCbsdGranted,
        tmnxCellPortCbsdAuthorized,
        tmnxCellPortCbsdTransDown
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications for cellular ports on Nokia SROS series
         systems, introduced in release 21."
    ::= { tmnxCellularV21Groups 3 }

tmnxCellularStatusGroupV21       OBJECT-GROUP
    OBJECTS     {
        tmnxCellPortRsrq,
        tmnxCellPortSinr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port status on Nokia SROS
         series systems, introduced in release 21."
    ::= { tmnxCellularV21Groups 4 }

tmnxCellularConfigGroupV21       OBJECT-GROUP
    OBJECTS     {
        tmnxCellPortSyncSysTime
    }
    STATUS      current
    DESCRIPTION
        "The group of objects maintaining cellular port configuration on Nokia
         SROS series systems, introduced in release 21."
    ::= { tmnxCellularV21Groups 5 }

tmnxCellularNotifyPrefix         OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 109 }

tmnxCellularNotifications        OBJECT IDENTIFIER ::= { tmnxCellularNotifyPrefix 0 }

tmnxCellularBearerCreated        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellularNotifyPdnId,
        tmnxCellPortBearerId
    }
    STATUS      current
    DESCRIPTION
        "The tmnxCellularBearerCreated notification is generated when the
         network creates a dedicated bearer on a cellular port."
    ::= { tmnxCellularNotifications 1 }

tmnxCellularBearerDeleted        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellularNotifyPdnId,
        tmnxCellPortBearerId
    }
    STATUS      current
    DESCRIPTION
        "The tmnxCellularBearerDeleted notification is generated when the
         network removes a dedicated bearer on a cellular port."
    ::= { tmnxCellularNotifications 2 }

tmnxCellularBearerModified       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellularNotifyPdnId,
        tmnxCellPortBearerId
    }
    STATUS      current
    DESCRIPTION
        "The tmnxCellularBearerModified notification is generated when the
         network modifies a bearer on a cellular port."
    ::= { tmnxCellularNotifications 3 }

tmnxCellularNoServiceReset       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxPortNotifyPortId,
        tmnxCellMdaNoServiceResetReason
    }
    STATUS      current
    DESCRIPTION
        "The tmnxCellularNoServiceReset notification is generated before the
         system resets because it could not establish service over the cellular
         interface."
    ::= { tmnxCellularNotifications 4 }

tmnxCellularActiveSimChange      NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellMdaAdminActiveSim,
        tmnxCellMdaOperActiveSim,
        tmnxCellMdaSimLastSwitchReason
    }
    STATUS      current
    DESCRIPTION
        "The tmnxCellularActiveSimChange notification is generated when the
         active SIM card on the cellular MDA changes."
    ::= { tmnxCellularNotifications 5 }

tmnxCellPortCbsdRegistered       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellPortCbsdAuthId,
        tmnxCellPortCbsdAuthCurSasSvrIp,
        tmnxCellPortCbsdAuthCurSasSvrIpT
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxCellPortCbsdRegistered notification is generated when
         the CBSD successfully registers with the SAS.

         [EFFECT] After this notification is generated the CBSD continues the
         CBSD authorization procedures.

         [RECOVERY] Not applicable."
    ::= { tmnxCellularNotifications 6 }

tmnxCellPortCbsdUnregistered     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellPortCbsdAuthId,
        tmnxCellCbsdAuthFailReason,
        tmnxCellCbsdAuthRespCode
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxCellPortCbsdUnregistered notification is generated
         when the CBSD is declared unregistered with the SAS.

         [EFFECT] The CBSD restarts the registration procedures with the SAS.

         [RECOVERY] Not applicable."
    ::= { tmnxCellularNotifications 7 }

tmnxCellPortCbsdGranted          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellPortCbsdAuthId,
        tmnxCellPortCbsdAuthGrantId,
        tmnxCellPortCbsdAuthGrantExpTime,
        tmnxCellPortCbsdAuthHeartbeatInt
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxCellPortCbsdGranted notification is generated when the
         CBSD has received a grant Id from the SAS. The CBSD is not authorized
         until after the authorized notification is generated.

         [EFFECT] The CBSD is awaiting authorization from the SAS.

         [RECOVERY] Not applicable."
    ::= { tmnxCellularNotifications 8 }

tmnxCellPortCbsdAuthorized       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellPortCbsdAuthId,
        tmnxCellPortCbsdAuthGrantId,
        tmnxCellPortCbsdAuthGrantExpTime,
        tmnxCellPortCbsdAuthHeartbeatInt
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxCellPortCbsdAuthorized notification is generated when
         the CBSD is authorized by the SAS.

         [EFFECT] The CBSD enables SR-OS on the cellular interface.

         [RECOVERY] Not applicable."
    ::= { tmnxCellularNotifications 9 }

tmnxCellPortCbsdTransDown        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxCellPortCbsdAuthId,
        tmnxCellPortCbsdAuthGrantId,
        tmnxCellCbsdAuthPrevTransState,
        tmnxCellCbsdAuthNewTransState,
        tmnxCellCbsdAuthFailReason,
        tmnxCellCbsdAuthRespCode
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxCellPortCbsdTransDown notification is generated when
         the CBSD is transitioning to a lower state.

         [EFFECT] The CBSD proceeds to complete authorization with the SAS from
         the state the CBSD has transitioned to.

         [RECOVERY] Not applicable."
    ::= { tmnxCellularNotifications 10 }

END