TIMETRA-SAP-MIB DEFINITIONS ::= BEGIN IMPORTS AtmTrafficDescrParamIndex, AtmVcIdentifier, AtmVpIdentifier FROM ATM-TC-MIB InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressIPv6, InetAddressPrefixLength, InetAddressType FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue FROM SNMPv2-TC TmnxEsaIdOrZero, TmnxEsaVmIdOrZero, TmnxHwIndexOrZero, tmnxCardSlotNum, tmnxChassisIndex, tmnxFPNum FROM TIMETRA-CHASSIS-MIB TConfigOrVsdFilterID, TFilterID FROM TIMETRA-FILTER-MIB timetraSRMIBModules FROM TIMETRA-GLOBAL-MIB tmnxPortCemStatsReportAlarm FROM TIMETRA-PORT-MIB TmnxMcFrClassIndex, tQosPolicerLevel, tSapEgrPolicerId, tSapIngPolicerId, tSchedulerPolicyName, tVirtualSchedulerName FROM TIMETRA-QOS-MIB BridgeId, CemSapEcid, CemSapReportAlarm, ConfigStatus, L2ptProtocols, MstiInstanceIdOrZero, MvplsPruneState, ServObjDesc, ServObjName, ServShcvOperState, ServType, StpExceptionCondition, StpPortRole, StpProtocol, TQosQueueAttribute, TSapEgrQueueId, TSapIngQueueId, TStpPortState, TVirtSchedAttribute, TdmOptionsCasTrunkFraming, TlsBpduTranslation, TlsLimitMacMove, TlsLimitMacMoveLevel, VpnId, custId, hostConnectivityChAddr, hostConnectivityCiAddr, hostConnectivityCiAddrType, protectedMacForNotify, staticHostDynamicMacConflict, staticHostDynamicMacIpAddress, svcDhcpClientLease, svcDhcpCoAError, svcDhcpLseStateNewChAddr, svcDhcpLseStateNewCiAddr, svcDhcpLseStateOldChAddr, svcDhcpLseStateOldCiAddr, svcDhcpLseStatePopulateError, svcDhcpPacketProblem, svcDhcpProxyError, svcDhcpSubAuthError, svcId, svcOperGrpName, svcTlsBackboneVplsSvcId, svcTlsMacMoveMaxRate, svcVpnId, tlsDHCPClientLease, tlsDhcpLseStateNewChAddr, tlsDhcpLseStateNewCiAddr, tlsDhcpLseStateOldChAddr, tlsDhcpLseStateOldCiAddr, tlsDhcpPacketProblem, tlsFdbBackboneDstMac, tlsFdbEvpnMplsEthSegId, tlsFdbEvpnMplsLabel, tlsFdbEvpnMplsTEPAddr, tlsFdbEvpnMplsTEPAddrType, tlsFdbType, tlsMstiInstanceId, tmnxCustomerBridgeId, tmnxCustomerRootBridgeId, tmnxOtherBridgeId, tmnxServConformance, tmnxServNotifications, tmnxServObjs, tstpTraps FROM TIMETRA-SERV-MIB DateAndTimeOrEmpty, QTag, QTagFullRangeOrNone, ServiceAdminStatus, ServiceOperStatus, SvcISID, TAdaptationRule, TBurstLimit, TBurstPercentOrDefault, TBurstSize, TBurstSizeBytes, TCIRPercentOverride, TCpmProtPolicyID, TCpmProtPolicyIDOrDefault, TDSCPNameOrEmpty, TEgrHsmdaPerPacketOffsetOvr, TEgrPolicerId, TEgressHsmdaCounterId, TEgressHsmdaQueueId, TEgressPerPacketOffsetOvr, TEgressPolicerId, TEgressQueueId, TFCSet, THPolCIRRateOverride, THPolPIRRateOverride, THPolVirtualScheCIRRate, THPolVirtualSchePIRRate, THSMDABurstSizeBytesOverride, THsmdaCIRKRateOverride, THsmdaPIRKRateOverride, THsmdaWrrWeightOverride, TIngHsmdaPerPacketOffsetOvr, TIngPolicerId, TIngressHsmdaCounterId, TIngressHsmdaQueueId, TIngressPolicerId, TIngressQueueId, TItemDescription, TItemLongDescription, TLNamedItemOrEmpty, TNamedItem, TNamedItemOrEmpty, TPIRPercentOverride, TPerPacketOffsetOvr, TPlcrBurstSizeBytesOverride, TPolicerBurstSizeBytesOverride, TPolicyStatementNameOrEmpty, TPortSchedulerAggRateLimitPIR, TPortSchedulerPIR, TQosQGrpInstanceIDorZero, TQosQueueCIRRate, TQosQueuePIRRate, TSapEgrEncapGroupActionType, TSapEgrEncapGroupType, TSapEgrEncapGrpQosPolicyIdOrZero, TSapEgressPolicyID, TSapIngressPolicyID, TTmplPolicyID, TWeight, TmnxActionType, TmnxAdminState, TmnxAncpStringOrZero, TmnxAuthAlgorithm, TmnxBsxAarpIdOrZero, TmnxBsxAarpServiceRefType, TmnxBsxTransPrefPolicyIdOrZero, TmnxBsxTransitIpPolicyIdOrZero, TmnxCustId, TmnxDefInterDestIdSource, TmnxDefSubIdSource, TmnxDistCpuProtActionDuration, TmnxDistCpuProtProtocolId, TmnxDistCpuProtState, TmnxEgrPolicerStatMode, TmnxEgrPolicerStatModeOverride, TmnxEnabledDisabled, TmnxEncapVal, TmnxEncrAlgorithm, TmnxEvpnMHEthSegStatus, TmnxHigh32, TmnxIPsecDirection, TmnxIPsecKeyingType, TmnxISID, TmnxIgmpVersion, TmnxIkePolicyDHGroupOrZero, TmnxIngPolicerStatMode, TmnxIngPolicerStatModeOverride, TmnxIsidMFibStatus, TmnxL2tpTunnelGroupNameOrEmpty, TmnxLagPerLinkHashClass, TmnxLagPerLinkHashWeight, TmnxLinkMapProfileIdOrZero, TmnxLow32, TmnxManagedRouteStatus, TmnxOperState, TmnxPortID, TmnxQosRateHigh32, TmnxQosRateLow32, TmnxRipListenerStatus, TmnxSapAASubScope, TmnxServId, TmnxSubIdentStringOrEmpty, TmnxSubShcvAction, TmnxSubShcvInterval, TmnxSubShcvRetryCount, TmnxSubShcvRetryTimeout, TmnxVRtrID, TmnxVRtrIDOrZero, TmnxVcIdOrNone, TmnxVeId FROM TIMETRA-TC-MIB ; timetraSvcSapMIBModule MODULE-IDENTITY LAST-UPDATED "202201200000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia SROS Support Web: http://www.nokia.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision the various services of the Nokia SROS system. Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "202201200000Z" DESCRIPTION "Rev 19.0 20 January 2022 00:00 22 release of the TIMETRA-SAP-MIB." REVISION "201903200000Z" DESCRIPTION "Rev 19.0 20 March 2019 00:00 19.0 release of the TIMETRA-SAP-MIB." REVISION "201703200000Z" DESCRIPTION "Rev 15.0 20 March 2017 00:00 15.0 release of the TIMETRA-SAP-MIB." REVISION "201502200000Z" DESCRIPTION "Rev 14.0 20 Feb 2015 00:00 14.0 release of the TIMETRA-SAP-MIB." REVISION "201402200000Z" DESCRIPTION "Rev 13.0 20 Feb 2014 00:00 13.0 release of the TIMETRA-SAP-MIB." REVISION "201401010000Z" DESCRIPTION "Rev 12.0 1 Jan 2014 00:00 12.0 release of the TIMETRA-SAP-MIB." REVISION "201102010000Z" DESCRIPTION "Rev 9.0 1 Feb 2011 00:00 9.0 release of the TIMETRA-SAP-MIB." REVISION "200902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-SAP-MIB." REVISION "200807010000Z" DESCRIPTION "Rev 6.1 01 Jul 2008 00:00 6.1 release of the TIMETRA-SAP-MIB." REVISION "200710010000Z" DESCRIPTION "Rev 1.0 01 OCT 2007 00:00 1.0 release of the TIMETRA-SAP-MIB from TIMETRA-SERV-MIB." ::= { timetraSRMIBModules 55 } TmnxSapAtmEncapsulation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxSapAtmEncapsulation data type is an enumerated integer that specifies the data encapsulation used over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and the ATM Forum LAN Emulation specification." SYNTAX INTEGER { vcMultiplexRoutedProtocol (1), vcMultiplexBridgedProtocol8023 (2), llcSnapRoutedProtocol (7), multiprotocolFrameRelaySscs (8), unknown (10), llcSnapBridgedProtocol8023 (11), vcMultiplexPpp (12), llcNlpidPpp (13), auto (14) } TmnxSapSubscriberLimit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxSapSubscriberLimit data type is an enumerated integer that specifies the maximum number of subscribers allowed on a SAP." SYNTAX Unsigned32 (0..131071) TmnxVlanGroupId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxVlanGroupId data type is an enumerated integer that specifies the VLAN range group identifier." SYNTAX Unsigned32 (1..4094) TmnxSapInstStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxSapInstStatus data type is an enumerated integer that indicates status of the SAP instantiating other SAPs controlled by this SAP." SYNTAX INTEGER { notApplicable (1), complete (2), inProgress (3), failed (4) } TmnxSapQtagManipulationAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxSapQtagManipulationAction data type is an enumerated integer that indicates the action to manipulate the q-tag(s) in the packets: notApplicable (0) - q-tag manipulation action is not allowed on this SAP. preserve (1) - keep all q-tag(s) in packets as received. pushOuter (2) - add outer q-tag with a specific value. popOuter (3) - remove outer q-tag in packets. replaceOuter (4) - replace the outer q-tag with a specific value. popOuterAndInner (5) - remove both inner and outer q-tags. popOuterAndReplaceInner (6) - remove outer q-tag and replace the inner q-tag with the a specific value replaceOuterAndInner (7) - replace both outer and inner q-tags with the specified values. pushOuterAndInner (8) - add both outer and inner q-tags with specific values. replaceAndPushOuter (9) - replace the q-tag and add an outer qtag with the specified outer q-tag value." SYNTAX INTEGER { notApplicable (0), preserve (1), pushOuter (2), popOuter (3), replaceOuter (4), popOuterAndInner (5), popOuterAndReplaceInner (6), replaceOuterAndInner (7), pushOuterAndInner (8), replaceAndPushOuter (9) } TmnxIpTunnelOperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxIpTunnelOperState data type is an enumerated integer that describes the values used to identify the current operational state of IP Tunnel functional modules." SYNTAX INTEGER { unknown (1), inService (2), outOfService (3), transition (4), limited (5) } topologyChangeSapMajorState NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue } STATUS current DESCRIPTION "The topologyChangeSapMajorState notification is generated when a SAP has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss." ::= { tstpTraps 1 } newRootSap NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue } STATUS current DESCRIPTION "The newRootSap notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. A new root bridge creates a new spanning tree topology and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss." ::= { tstpTraps 2 } tmnxSapObjs OBJECT IDENTIFIER ::= { tmnxServObjs 3 } sapNumEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of SAPs configured in this device." ::= { tmnxSapObjs 1 } sapBaseInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic SAP information." ::= { tmnxSapObjs 2 } sapBaseInfoEntry OBJECT-TYPE SYNTAX SapBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapBaseInfoTable 1 } SapBaseInfoEntry ::= SEQUENCE { sapPortId TmnxPortID, sapEncapValue TmnxEncapVal, sapRowStatus RowStatus, sapType ServType, sapDescription TItemLongDescription, sapAdminStatus ServiceAdminStatus, sapOperStatus INTEGER, sapIngressQosPolicyId TSapIngressPolicyID, sapIngressMacFilterId TConfigOrVsdFilterID, sapIngressIpFilterId TConfigOrVsdFilterID, sapEgressQosPolicyId TSapEgressPolicyID, sapEgressMacFilterId TFilterID, sapEgressIpFilterId TFilterID, sapMirrorStatus INTEGER, sapIesIfIndex InterfaceIndexOrZero, sapLastMgmtChange TimeStamp, sapCollectAcctStats TruthValue, sapAccountingPolicyId Unsigned32, sapVpnId VpnId, sapCustId TmnxCustId, sapCustMultSvcSite ServObjName, sapIngressQosSchedulerPolicy ServObjName, sapEgressQosSchedulerPolicy ServObjName, sapSplitHorizonGrp ServObjName, sapIngressSharedQueuePolicy ServObjName, sapIngressMatchQinQDot1PBits INTEGER, sapOperFlags BITS, sapLastStatusChange TimeStamp, sapAntiSpoofing INTEGER, sapIngressIpv6FilterId TConfigOrVsdFilterID, sapEgressIpv6FilterId TFilterID, sapTodSuite TNamedItemOrEmpty, sapIngUseMultipointShared TruthValue, sapEgressQinQMarkTopOnly TruthValue, sapEgressAggRateLimit TPortSchedulerAggRateLimitPIR, sapEndPoint ServObjName, sapIngressVlanTranslation INTEGER, sapIngressVlanTranslationId Integer32, sapSubType INTEGER, sapCpmProtPolicyId TCpmProtPolicyID, sapCpmProtMonitorMac TruthValue, sapEgressFrameBasedAccounting TruthValue, sapIngressAggRateLimit TPortSchedulerPIR, sapEgressHsmdaShaperOverride TNamedItemOrEmpty, sapIngressHsmdaPacketOffOvr TIngHsmdaPerPacketOffsetOvr, sapEgressHsmdaPacketOffOverride TEgrHsmdaPerPacketOffsetOvr, sapCallingStationId DisplayString, sapIsaAaApplicationProfile ServObjName, sapIngPolicerPolicy TNamedItemOrEmpty, sapEgrPolicerPolicy TNamedItemOrEmpty, sapTmplUsed TNamedItemOrEmpty, sapEthRingIndex Unsigned32, sapIngressFlowspec TruthValue, sapCpmProtEthCfmMonitorFlags BITS, sapTransitIpPolicyId TmnxBsxTransitIpPolicyIdOrZero, sapOperGrp TNamedItemOrEmpty, sapMonitorOperGrp TNamedItemOrEmpty, sapEgressHsmdaWrrPolicyOvr TNamedItemOrEmpty, sapTransitPrefixPolicyId TmnxBsxTransPrefPolicyIdOrZero, sapCpmProtMonitorIP TruthValue, sapHostsAdminState ServiceAdminStatus, sapHostLockoutPolicy TNamedItemOrEmpty, sapAarpId TmnxBsxAarpIdOrZero, sapIngressFPQGrp TNamedItemOrEmpty, sapIngressFPQGrpInstanceId TQosQGrpInstanceIDorZero, sapAarpServRefType TmnxBsxAarpServiceRefType, sapSiteName TNamedItemOrEmpty, sapIgnoreOperDown TruthValue, sapLagLinkMapProfile TmnxLinkMapProfileIdOrZero, sapIngressIPv6Flowspec TruthValue, sapEgressPortQGrp TNamedItemOrEmpty, sapEgressPortQGrpInstanceId TQosQGrpInstanceIDorZero, sapEtreeRootLeafTag TruthValue, sapEtreeLeafTag Integer32, sapEtreeLeafAc TruthValue, sapEgressAggRateLUB TruthValue, sapEgressAggRateLmtHi TmnxQosRateHigh32, sapEgressAggRateLmt TmnxQosRateLow32, sapMulticastSource TruthValue } sapPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the access port where this SAP is defined." ::= { sapBaseInfoEntry 1 } sapEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the label used to identify this SAP on the access port specified by sapPortId." ::= { sapBaseInfoEntry 2 } sapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'." ::= { sapBaseInfoEntry 3 } sapType OBJECT-TYPE SYNTAX ServType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of service where this SAP is defined." ::= { sapBaseInfoEntry 4 } sapDescription OBJECT-TYPE SYNTAX TItemLongDescription (SIZE (0..160)) MAX-ACCESS read-create STATUS current DESCRIPTION "Generic information about this SAP." DEFVAL { "" } ::= { sapBaseInfoEntry 5 } sapAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of this SAP." DEFVAL { up } ::= { sapBaseInfoEntry 6 } sapOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), ingressQosMismatch (3), egressQosMismatch (4), portMtuTooSmall (5), svcAdminDown (6), iesIfAdminDown (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapOperStatus indicates the operating state of this SAP." ::= { sapBaseInfoEntry 7 } sapIngressQosPolicyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapIngressQosPolicyId specifies the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified. The value 0 is needed for mirror SAPs that cannot have a QoS policy assigned." DEFVAL { 1 } ::= { sapBaseInfoEntry 8 } sapIngressMacFilterId OBJECT-TYPE SYNTAX TConfigOrVsdFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapIngressMacFilterId specifies the row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapBaseInfoEntry 9 } sapIngressIpFilterId OBJECT-TYPE SYNTAX TConfigOrVsdFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapIngressIpFilterId specifies the row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapBaseInfoEntry 10 } sapEgressQosPolicyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified." DEFVAL { 1 } ::= { sapBaseInfoEntry 11 } sapEgressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapBaseInfoEntry 12 } sapEgressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapBaseInfoEntry 13 } sapMirrorStatus OBJECT-TYPE SYNTAX INTEGER { ingress (1), egress (2), ingressAndEgress (3), disabled (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether traffic mirroring has been enabled on this SAP." ::= { sapBaseInfoEntry 14 } sapIesIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of sapType is 'ies' this object specifies the index of the IES interface where this SAP is defined. The value of this object can be set only when the row is created and cannot be changed while the row status is 'active'. This object is otherwise not significant and should have the value zero." ::= { sapBaseInfoEntry 15 } sapLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent management-initiated change to this SAP." ::= { sapBaseInfoEntry 16 } sapCollectAcctStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the agent collects accounting statistics on this SAP." DEFVAL { false } ::= { sapBaseInfoEntry 17 } sapAccountingPolicyId OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the policy to use to collect accounting statistics on this SAP. The value zero indicates that the agent should use the default accounting policy, if one exists." DEFVAL { 0 } ::= { sapBaseInfoEntry 18 } sapVpnId OBJECT-TYPE SYNTAX VpnId MAX-ACCESS read-only STATUS current DESCRIPTION "The VPN ID of the associated service." ::= { sapBaseInfoEntry 19 } sapCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID of the associated service." ::= { sapBaseInfoEntry 20 } sapCustMultSvcSite OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object, when not null, specifies the Multi-Service Site this SAP is a member of. This information is used to configure the ingress and egress QoS schedulers for this SAP." DEFVAL { "" } ::= { sapBaseInfoEntry 21 } sapIngressQosSchedulerPolicy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be set only when sapCustMultSvcSite is null. It specifies the ingress QoS scheduler for this SAP." DEFVAL { "" } ::= { sapBaseInfoEntry 22 } sapEgressQosSchedulerPolicy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be set only when sapCustMultSvcSite is null. It specifies the egress QoS scheduler for this SAP." DEFVAL { "" } ::= { sapBaseInfoEntry 23 } sapSplitHorizonGrp OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the name of the split-horizon group where the SAP belongs to. This object can be set only at the time the row is created and is mutually exclusive with sapMulticastSource. Per default a SAP does not belong to any split-horizon group. The name specified must correspond to an existing split- horizon group in the TLS service where this SAP is defined." DEFVAL { "" } ::= { sapBaseInfoEntry 24 } sapIngressSharedQueuePolicy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the ingress shared queue policy used by this SAP. When the value of this object is null it means that the SAP will use individual ingress QoS queues, instead of the shared ones." DEFVAL { "" } ::= { sapBaseInfoEntry 25 } sapIngressMatchQinQDot1PBits OBJECT-TYPE SYNTAX INTEGER { default (1), top (2), bottom (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object applies only to SAPs defined on a port configured for qinq service encapsulation. It specifies which 802.1P bits will be used to match a QoS or a MAC filter policy when a double-tagged frame is received on this SAP." DEFVAL { default } ::= { sapBaseInfoEntry 26 } sapOperFlags OBJECT-TYPE SYNTAX BITS { sapAdminDown (0), svcAdminDown (1), iesIfAdminDown (2), portOperDown (3), portMtuTooSmall (4), l2OperDown (5), ingressQosMismatch (6), egressQosMismatch (7), relearnLimitExceeded (8), recProtSrcMac (9), subIfAdminDown (10), sapIpipeNoCeIpAddr (11), reserved12 (12), reserved13 (13), sapParamMismatch (14), sapCemNoEcidOrMacAddr (15), sapStandbyForMcRing (16), sapSvcMtuTooSmall (17), ingressNamedPoolMismatch (18), egressNamedPoolMismatch (19), ipMirrorNoMacAddr (20), sapEpipeNoRingNode (21), mcStandby (22), mhStandby (23), oamDownMepFault (24), oamUpMepFault (25), ethTunTagMisconfig (26), ingressPolicerMismatch (27), egressPolicerMismatch (28), sapTlsNoRingNode (29), ethRingPathBlocked (30), oamTunnelMepFault (31), operGrpDown (32), portBouncing (33), sapEgressHQosMgmtMismatch (34), evpnP2mpConflict (35), l2tpv3TunnelDown (36), labelStackLimitExceeded (37), sapIngQGrpRedirMismatch (38), sapEgrQGrpRedirMismatch (39) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This object indicates all the conditions that affect the operating status of this SAP. The bit values are: sapAdminDown (0) - SAP is admin down. svcAdminDown (1) - Service is admin down. iesIfAdminDown (2) - IP interface is admin down (IES and VPRN only). portOperDown (3) - Access port is oper down. portMtuTooSmall (4) - Access port's MTU is < Service MTU l2OperDown (5) - L2 PVC/PVP is oper down (FR and ATM only). ingressQosMismatch (6) - Mismatch between ingress QoS and Scheduler policies. egressQosMismatch (7) - Mismatch between egress QoS and Scheduler policies. relearnLimitExceeded (8) - MAC relearn limit was exceeded (TLS only). recProtSrcMac (9) - Received a packet with a protected source MAC (TLS only). subIfAdminDown (10) - Subscriber interface is admin down (group-interface SAP only). sapIpipeNoCeIpAddr (11) - CE IP Address not configured for Ipipe SAP (IPIPE SAP only). reserved12 (12) reserved13 (13) sapParamMismatch (14) - Service specific local parameter mismatch. sapCemNoEcidOrMacAddr (15) - ECID or MAC address not configured (CEM SAP only). sapStandbyForMcRing (16) - mc-ring keeps this SAP standby for the corresponding SAP on peer. sapSvcMtuTooSmall (17) - Service MTU is < SAP payload. ingressNamedPoolMismatch (18) - Invalid named pool on the ingress side. egressNamedPoolMismatch (19) - Invalid named pool on the egress side. ipMirrorNoMacAddr (20) - No MAC Address configured for the IP mirror. sapEpipeNoRingNode (21) - No TIMETRA-MC-REDUNDANCY-MIB ::tmnxMcEpipeSapEntry object configured for Epipe SAP (EPIPE SAP only). mcStandby (22) - indicates the SAP is standby because of a multi-chassis protocol. mhStandby (23) - indicates the SAP is standby because of a BGP multi-home protocol. oamDownMepFault (24) - ETH-CFM down MEP fault detected. oamUpMepFault (25) - ETH-CFM up MEP fault detected. ethTunTagMisconfig (26) - Missing Eth-tunnel SAP tag(s). ingressPolicerMismatch (27) - indicate ingress policer is parented to non-existent arbiter egressPolicerMismatch (28) - indicate egress policer is parented to non-existent arbiter. sapTlsNoRingNode (29) - No TIMETRA-MC-REDUNDANCY-MIB ::tmnxMcTlsSapEntry object configured for TLS SAP (VPLS SAP only). ethRingPathBlocked (30) - indicates eth-ring path is blocked. oamTunnelMepFault (31) - ETH-CFM Tunnel MEP fault detected. operGrpDown (32) - indicates operational-group is down. portBouncing (33) - indicates port is oper down and bouncing. sapEgressHQosMgmtMismatch (34) - indicates the policer is in orphaned operational state as scheduler policy does not exist. evpnP2mpConflict (35) - Conflict with evpn p2mp. l2tpv3TunnelDown (36) - indicates l2tpv3 tunnel status. labelStackLimitExceeded (37) - label stack overhead exceeding the egress IOM limitation. sapIngQGrpRedirMismatch (38) - indicates an instance in the SAP's ingress QGrp redirect list is not present on the FP. sapEgrQGrpRedirMismatch (39) - indicates an instance in the SAP's egress QGrp redirect list is not present on the port. This object is replaced by tmnxSapOperFlags." ::= { sapBaseInfoEntry 27 } sapLastStatusChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent operating status change to this SAP." ::= { sapBaseInfoEntry 28 } sapAntiSpoofing OBJECT-TYPE SYNTAX INTEGER { disabled (0), sourceIpAddr (1), sourceMacAddr (2), sourceIpAndMacAddr (3), nextHopIpAndMacAddr (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapAntiSpoofing specifies the type of anti-spoof filtering applicable on this SAP." DEFVAL { disabled } ::= { sapBaseInfoEntry 29 } sapIngressIpv6FilterId OBJECT-TYPE SYNTAX TConfigOrVsdFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified." DEFVAL { 0 } ::= { sapBaseInfoEntry 30 } sapEgressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified." DEFVAL { 0 } ::= { sapBaseInfoEntry 31 } sapTodSuite OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object sapTodSuite specifies the Time of Day (ToD) suite to be applied on this SAP. An empty string indicates that no ToD suite is applied on this SAP. A set request will only be allowed, if the indicated suite is defined in TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable. This object is obsoleted in 14.0 release." DEFVAL { ''H } ::= { sapBaseInfoEntry 32 } sapIngUseMultipointShared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of sapIngressSharedQueuePolicy is not null, the value of the object sapIngUseMultipointShared specifies whether this SAP uses the multipoint-shared queues of the shared policy." DEFVAL { false } ::= { sapBaseInfoEntry 33 } sapEgressQinQMarkTopOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the encapsulation type of the access port where this SAP is defined is qinq, the value of the object sapEgressQinQMarkTopOnly specifies which P-bits to mark during packet egress. When the value is false both set of P-bits are marked. When the value is true, only the P-bits in the top Q-tag are marked." DEFVAL { false } ::= { sapBaseInfoEntry 34 } sapEgressAggRateLimit OBJECT-TYPE SYNTAX TPortSchedulerAggRateLimitPIR UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object sapEgressAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit. This object is obsoleted in 13.0 release and replaced by sapEgressAggRateLmt." DEFVAL { -1 } ::= { sapBaseInfoEntry 35 } sapEndPoint OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapEndPoint specifies the service endpoint to which this SAP is attached. The svcId of the SAP MUST match the svcId of the service endpoint." DEFVAL { "" } ::= { sapBaseInfoEntry 36 } sapIngressVlanTranslation OBJECT-TYPE SYNTAX INTEGER { none (1), vlanId (2), copyOuter (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressVlanTranslation specifies the desired Ingress Vlan Translation. A value of 'vlanId' specifies that the value of sapIngressVlanTranslationId is to be used to overwrite the preserved VLAN id in the packet. A value of 'copyOuter' specifies that the outer VLAN id should be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslation to 'vlanId' and sapIngressVlanTranslationId is set to '-1'." DEFVAL { none } ::= { sapBaseInfoEntry 37 } sapIngressVlanTranslationId OBJECT-TYPE SYNTAX Integer32 (-1 | 0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressVlanTranslationId specifies the VLAN id to be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslationId to other than '-1' and sapIngressVlanTranslation is not set to 'vlanId'." DEFVAL { -1 } ::= { sapBaseInfoEntry 38 } sapSubType OBJECT-TYPE SYNTAX INTEGER { regular (0), capture (1), managed (2), video (3), internal (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapSubType specifies the sub type for this SAP. A value of 'regular' indicates a standard SAP. A value of 'capture' specifies a capturing SAP in which triggering packets will be sent to the CPM. Non-triggering packets captured by the 'capture' SAP will be dropped. A value of 'managed' indicates a managed SAP which was created dynamically after receiving triggering packets on a SAP with a sapSubType value of 'capture'. Entries with a value of 'managed' are not user editable and are not maintained in the configuration file. A value of 'video' indicates a video SAP which terminates on a video SAP. Entries with a value of 'video' are not user editable and are not maintained in the configuration file. A value of 'internal' indicates an internal SAP which was created by the system. Entries with a value of 'internal' are not user editable and are not maintained in the configuration file. Whereas any of the five values may be returned in in response to an SNMP GET request, only two values may be specified in an SNMP SET request: 'regular' and 'capture'. An attempt to specify a value of 'managed', 'video' or 'internal' in an SNMP SET request will fail with an error of 'inconsistentValue'. The value of this object cannot be changed after creation." DEFVAL { regular } ::= { sapBaseInfoEntry 39 } sapCpmProtPolicyId OBJECT-TYPE SYNTAX TCpmProtPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapCpmProtPolicyId associates a CPM Protection policy with a SAP. A value of zero (0) specifies that no CPM Protection policy is associated with this SAP. A value of 254 specifies that the default CPM Protection policy is associated with this SAP. If no value for sapCpmProtPolicyId is specified when the sapBaseInfoEntry is created, the system assigns a default value as follows: if the system creates a corresponding entry in the sapSubMgmtInfoTable, the default value is 254; otherwise, the default value is 'zero'. This means that all SAPs that support Enhanced Subscriber Management get a default value of 254. If a SAP would get a default value of 254, it is not allowed to set the value of sapCpmProtPolicyId to 'zero'. If a SAP would get a default value of 'zero', it is not allowed to modify the value of sapCpmProtPolicyId. This object is not supported on 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'." ::= { sapBaseInfoEntry 40 } sapCpmProtMonitorMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapCpmProtMonitorMac specifies whether or not to apply the tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy to packets served by the SAP, on a per source MAC address basis. For example, suppose sapCpmProtMonitorMac is 'true', and this SAP's sapCpmProtPolicyId points to a policy table row with tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two source MAC addresses each send 150 packets/second to this SAP. Approx. 50 packets/second from each source will be discarded. If the value of sapCpmProtPolicyId is equal to zero, the value of sapCpmProtMonitorMac is irrelevant and will be ignored. At most one of the following options can be enabled on this SAP: 1. sapCpmProtMonitorMac, 2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sapCpmProtMonitorIP. This object is not supported on 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'." DEFVAL { false } ::= { sapBaseInfoEntry 41 } sapEgressFrameBasedAccounting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressFrameBasedAccounting specifies whether to use frame-based accounting when evaluating sapEgressAggRateLmt for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used." DEFVAL { false } ::= { sapBaseInfoEntry 42 } sapIngressAggRateLimit OBJECT-TYPE SYNTAX TPortSchedulerPIR UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object sapIngressAggRateLimit specifies the maximum total rate of all ingress queues for this SAP. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release." DEFVAL { -1 } ::= { sapBaseInfoEntry 43 } sapEgressHsmdaShaperOverride OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object sapEgressHsmdaShaperOverride specifies the name of the secondary shaper for this SAP. The value must correspond to an entry in the tmnxPortEgrShaperTable. If the empty string is specified, the default secondary shaper will be used." DEFVAL { "" } ::= { sapBaseInfoEntry 44 } sapIngressHsmdaPacketOffOvr OBJECT-TYPE SYNTAX TIngHsmdaPerPacketOffsetOvr UNITS "bytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngressHsmdaPacketOffOvr specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting on ingress. This object is obsoleted in 10.0 Release." DEFVAL { -128 } ::= { sapBaseInfoEntry 45 } sapEgressHsmdaPacketOffOverride OBJECT-TYPE SYNTAX TEgrHsmdaPerPacketOffsetOvr UNITS "bytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgressHsmdaPacketOffOverride specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting on ingress." DEFVAL { -128 } ::= { sapBaseInfoEntry 46 } sapCallingStationId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapCallingStationId specifies the calling-station-id to be included in all RADIUS authentication and accounting requests if configured to be included in the corresponding RADIUS authentication or accounting policy. If the empty string is specified, no calling-station-id will be included." DEFVAL { "" } ::= { sapBaseInfoEntry 47 } sapIsaAaApplicationProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIsaAaApplicationProfile specifies the ISA-AA application profile for this sap. The specified application profile needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable." DEFVAL { "" } ::= { sapBaseInfoEntry 48 } sapIngPolicerPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPolicerPolicy specifies the ingress policer control policy applicable to this subscriber profile." DEFVAL { ''H } ::= { sapBaseInfoEntry 49 } sapEgrPolicerPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPolicerPolicy specifies the egress policer control policy applicable to this subscriber profile." DEFVAL { ''H } ::= { sapBaseInfoEntry 50 } sapTmplUsed OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTmplUsed indicates the name of the sap-template used to create this sap. A value of empty string indicates that this sap was not created using a sap-template." ::= { sapBaseInfoEntry 51 } sapEthRingIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthRingIndex specifies the Ethernet Ring associated with this SAP. This object, if required, MUST be configured during the row creation of the sapBaseInfoTable row, and MUST reference an existing row in TIMETRA-ETH-RING-MIB::tmnxEthRingConfigTable. The value zero, the default value, specifies there is no Ethernet Ring associated with this SAP. This object can not be changed once set; the SAP MUST be destroyed and recreated to change the sapEthRingIndex object." DEFVAL { 0 } ::= { sapBaseInfoEntry 52 } sapIngressFlowspec OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngressFlowspec specifies whether IPv4 ingress Flowspec is enabled for this sap." DEFVAL { false } ::= { sapBaseInfoEntry 53 } sapCpmProtEthCfmMonitorFlags OBJECT-TYPE SYNTAX BITS { ethCfmMonitor (0), ethCfmMonitorAggregate (1), ethCfmMonitorCommittedAccessRate (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the SAP. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on this SAP. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on this SAP. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SAP's sapCpmProtPolicyId. At most one of the following options can be enabled on this SAP: 1. sapCpmProtMonitorMac, 2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sapCpmProtMonitorIP. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SAP, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SAP, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting." DEFVAL { {} } ::= { sapBaseInfoEntry 54 } sapTransitIpPolicyId OBJECT-TYPE SYNTAX TmnxBsxTransitIpPolicyIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTransitIpPolicyId specifies the transit IP policy to be associated with this SAP. The value must either be '0' indicating an invalid transit IP policy or the specified transit IP policy needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxTransitIpPolicyTable. At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can be non-zero." DEFVAL { 0 } ::= { sapBaseInfoEntry 55 } sapOperGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the sapOperGrp specifies the Operational-Group identifier associated with this SAP. An 'inconsistentValue' error is returned when both sapOperGrp and sapMonitorOperGrp are set together and at least one of them to a non-default value." DEFVAL { "" } ::= { sapBaseInfoEntry 56 } sapMonitorOperGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the sapMonitorOperGrp specifies the Operational-Group identifier which will affect the state of this SAP. An 'inconsistentValue' error is returned when both sapOperGrp and sapMonitorOperGrp are set together and at least one of them to a non-default value." DEFVAL { "" } ::= { sapBaseInfoEntry 57 } sapEgressHsmdaWrrPolicyOvr OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the sapEgressHsmdaWrrPolicyOvr specifies the egress hsmda weighted round-robin policy override for this SAP. When no policy is given, the hsmda weighted round-robin policy specified in the sap-egress policy is honored. When a valid policy is given, it is used instead of the hsmda weighted round-robin policy given in the sap-egress policy." DEFVAL { "" } ::= { sapBaseInfoEntry 58 } sapTransitPrefixPolicyId OBJECT-TYPE SYNTAX TmnxBsxTransPrefPolicyIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTransitPrefixPolicyId specifies the transit prefix policy to be associated with this SAP. The value must either be '0' indicating an invalid transit prefix policy or the specified transit prefix policy needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxTransPrefPolicyTable. At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can be non-zero." DEFVAL { 0 } ::= { sapBaseInfoEntry 59 } sapCpmProtMonitorIP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapCpmProtMonitorIP specifies whether or not to apply the tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy to IPv4 DHCP packets served by the SAP, on a per source IP address basis. For example, suppose sapCpmProtMonitorIP is 'true', and this SAP's sapCpmProtPolicyId points to a policy table row with tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two source IP addresses (e.g. 138.120.141.173 and 138.120.141.174) each send 150 DHCP packets/second to this SAP. Approx. 50 DHCP packets/second from each source will be discarded. If the value of sapCpmProtPolicyId is equal to zero, the value of sapCpmProtMonitorIP is irrelevant and will be ignored. At most one of the following options can be enabled on this SAP: 1. sapCpmProtMonitorMac, 2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sapCpmProtMonitorIP." DEFVAL { false } ::= { sapBaseInfoEntry 60 } sapHostsAdminState OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapHostsAdminState specifies the administrative state of all hosts on this SAP. If set to 'down' no dynamic subscriber hosts can be created, and any active dynamic host on the SAP will be removed." DEFVAL { up } ::= { sapBaseInfoEntry 61 } sapHostLockoutPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapHostLockoutPolicy specifies the Host Lockout Policy for this SAP." DEFVAL { "" } ::= { sapBaseInfoEntry 62 } sapAarpId OBJECT-TYPE SYNTAX TmnxBsxAarpIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapAarpId specifies the AA Redundancy Protocol (AARP) instance associated with this SAP. If set to 0, no AARP instance is associated with this SAP." DEFVAL { 0 } ::= { sapBaseInfoEntry 63 } sapIngressFPQGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressFPQGrp specifies the forwarding-plane queue group Policy for this SAP. This object must be set along with sapIngressFPQGrpInstanceId object. An 'inconsistentValue' error is returned if sapIngressFPQGrp is set to a non-default value and an entry corresponding to tmnxFPNum to which this SAP belongs does not exist in tmnxFPAccIngQGrpTable." DEFVAL { "" } ::= { sapBaseInfoEntry 64 } sapIngressFPQGrpInstanceId OBJECT-TYPE SYNTAX TQosQGrpInstanceIDorZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressFPQGrpInstanceId specifies the instance of the forwarding-plane ingress Queue Group for this SAP. This object must be set along with sapIngressFPQGrp object. An 'inconsistentValue' error is returned if sapIngressFPQGrp is set to a non-default value and an entry corresponding to tmnxFPNum to which this SAP belongs does not exist in tmnxFPAccIngQGrpTable." DEFVAL { 0 } ::= { sapBaseInfoEntry 65 } sapAarpServRefType OBJECT-TYPE SYNTAX TmnxBsxAarpServiceRefType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapAarpServRefType specifies the role of the SAP referenced by the AA Redundancy Protocol (AARP) instance identified by sapAarpId. If sapAarpId is the invalid AARP instance '0', then the service reference type is 'none(0)'." DEFVAL { none } ::= { sapBaseInfoEntry 66 } sapSiteName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapSiteName indicates the site-name associated with this SAP." ::= { sapBaseInfoEntry 67 } sapIgnoreOperDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIgnoreOperDown specifies whether service will ignore when sap is operationally down." DEFVAL { false } ::= { sapBaseInfoEntry 68 } sapLagLinkMapProfile OBJECT-TYPE SYNTAX TmnxLinkMapProfileIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapLagLinkMapProfile specifies the LAG link map profile identifier associated with this SAP." DEFVAL { 0 } ::= { sapBaseInfoEntry 69 } sapIngressIPv6Flowspec OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngressIPv6Flowspec specifies whether IPv6 ingress Flowspec is enabled for this sap." DEFVAL { false } ::= { sapBaseInfoEntry 70 } sapEgressPortQGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressPortQGrp specifies the egress access port queue-group policy for this SAP. This object must be set along with sapEgressPortQGrpInstanceId object. An 'inconsistentValue' error is returned if sapEgressPortQGrp and sapEgressPortQGrpInstanceId are set to non-default values and an entry in tmnxPortPortID to which this SAP belongs does not exist in tPortAccEgrQGrpTable." DEFVAL { ''H } ::= { sapBaseInfoEntry 71 } sapEgressPortQGrpInstanceId OBJECT-TYPE SYNTAX TQosQGrpInstanceIDorZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressPortQGrpInstanceId specifies the egress access port queue-group policy for this SAP. This object must be set along with sapEgressPortQGrp object. An 'inconsistentValue' error is returned if sapEgressPortQGrp and sapEgressPortQGrpInstanceId are set to non-default values and an entry in tmnxPortPortID to which this SAP belongs does not exist in tPortAccEgrQGrpTable." DEFVAL { 0 } ::= { sapBaseInfoEntry 72 } sapEtreeRootLeafTag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEtreeRootLeafTag specifies whether or not this SAP is etree tagging in this service, with the first VLAN tag in the SAP identifier being the VLAN tag for etree root traffic. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when TIMETRA-SERV-MIB::svcType for the service is not set to 'tls'. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the service is set to 'false'. An 'inconsistentValue' error is returned if the value of sapEtreeRootLeafTag and sapEtreeLeafTag are not set together. An 'inconsistentValue' error is returned if sapEtreeRootLeafTag and sapEtreeLeafTag are set to non-default values and sapEtreeLeafAc is also set to a non-default value for the same SAP instance. The value of this object can be set only during the creation of the SAP instance." DEFVAL { false } ::= { sapBaseInfoEntry 74 } sapEtreeLeafTag OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEtreeLeafTag specifies the VLAN tag to be used for etree leaf traffic in the service. An 'inconsistentValue' error is returned if the value of sapEtreeRootLeafTag and sapEtreeLeafTag are not set together. An 'inconsistentValue' error is returned if sapEtreeRootLeafTag and sapEtreeLeafTag are set to non-default values and sapEtreeLeafAc is also set to a non-default value for the same SAP instance. The value of this object can be set only during the creation of the SAP instance." DEFVAL { 0 } ::= { sapBaseInfoEntry 75 } sapEtreeLeafAc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEtreeLeafAc specifies whether or not this SAP is an etree leaf access circuit of the service. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the service is set to 'false'. An 'inconsistentValue' error is returned if sapEtreeLeafAc is set to a non-default value and sapEtreeRootLeafTag and sapEtreeLeafTag are also set to non-default values for the same SAP instance. The value of this object can be set only during the creation of the SAP instance." DEFVAL { false } ::= { sapBaseInfoEntry 76 } sapEgressAggRateLUB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressAggRateLUB specifies whether to limit the unused bandwidth and allow a tighter control in allocation of bandwidth by HQos. When the value of sapEgressAggRateLUB is set to 'true', HQos algorithm distributes any unused aggregate bandwidth between queues operating below their fair share rates. This allows a simplified aggregate rate protection while allocating bandwidth by HQos scheduling algorithm." DEFVAL { false } ::= { sapBaseInfoEntry 77 } sapEgressAggRateLmtHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressAggRateLmtHi specifies the upper 32 bits of the maximum total rate of all egress queues for this SAP. This value should always be set along with sapEgressAggRateLmt, otherwise an 'inconsistentValue' error is returned. When the value of sapEgressAggRateLmtHi along with the value of sapEgressAggRateLmt is set to 4294967295 (0xFFFFFFFF), rate for this SAP indicates maximum total rate of all egress queues." DEFVAL { 4294967295 } ::= { sapBaseInfoEntry 79 } sapEgressAggRateLmt OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressAggRateLmt specifies the maximum total rate of all egress queues for this SAP. The value of 4294967295 (0xFFFFFFFF) means that there is no limit. When the value of sapEgressAggRateLmtHi along with the value of sapEgressAggRateLmt is set to 4294967295 (0xFFFFFFFF), rate for this SAP indicates maximum total rate of all egress queues." DEFVAL { 4294967295 } ::= { sapBaseInfoEntry 80 } sapMulticastSource OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapMulticastSource specifies whether or not the multicast source is enabled on the SAP. This object can only be set at the time the row is created and is mutually exclusive with sapSplitHorizonGrp." DEFVAL { false } ::= { sapBaseInfoEntry 81 } sapTlsInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TLS SAP information." ::= { tmnxSapObjs 3 } sapTlsInfoEntry OBJECT-TYPE SYNTAX SapTlsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTlsInfoTable 1 } SapTlsInfoEntry ::= SEQUENCE { sapTlsStpAdminStatus TmnxEnabledDisabled, sapTlsStpPriority Integer32, sapTlsStpPortNum Integer32, sapTlsStpPathCost Integer32, sapTlsStpRapidStart TmnxEnabledDisabled, sapTlsStpBpduEncap INTEGER, sapTlsStpPortState TStpPortState, sapTlsStpDesignatedBridge BridgeId, sapTlsStpDesignatedPort Integer32, sapTlsStpForwardTransitions Gauge32, sapTlsStpInConfigBpdus Gauge32, sapTlsStpInTcnBpdus Gauge32, sapTlsStpInBadBpdus Gauge32, sapTlsStpOutConfigBpdus Gauge32, sapTlsStpOutTcnBpdus Gauge32, sapTlsStpOperBpduEncap INTEGER, sapTlsVpnId VpnId, sapTlsCustId TmnxCustId, sapTlsMacAddressLimit Integer32, sapTlsNumMacAddresses Integer32, sapTlsNumStaticMacAddresses Integer32, sapTlsMacLearning TmnxEnabledDisabled, sapTlsMacAgeing TmnxEnabledDisabled, sapTlsStpOperEdge TruthValue, sapTlsStpAdminPointToPoint INTEGER, sapTlsStpPortRole StpPortRole, sapTlsStpAutoEdge TmnxEnabledDisabled, sapTlsStpOperProtocol StpProtocol, sapTlsStpInRstBpdus Gauge32, sapTlsStpOutRstBpdus Gauge32, sapTlsLimitMacMove TlsLimitMacMove, sapTlsDhcpSnooping TmnxEnabledDisabled, sapTlsMacPinning TmnxEnabledDisabled, sapTlsDiscardUnknownSource TmnxEnabledDisabled, sapTlsMvplsPruneState MvplsPruneState, sapTlsMvplsMgmtService TmnxServId, sapTlsMvplsMgmtPortId TmnxPortID, sapTlsMvplsMgmtEncapValue TmnxEncapVal, sapTlsArpReplyAgent INTEGER, sapTlsStpException StpExceptionCondition, sapTlsAuthenticationPolicy TPolicyStatementNameOrEmpty, sapTlsL2ptTermination TmnxEnabledDisabled, sapTlsBpduTranslation TlsBpduTranslation, sapTlsStpRootGuard TruthValue, sapTlsStpInsideRegion TruthValue, sapTlsEgressMcastGroup TNamedItemOrEmpty, sapTlsStpInMstBpdus Gauge32, sapTlsStpOutMstBpdus Gauge32, sapTlsRestProtSrcMac TruthValue, sapTlsRestUnprotDstMac TruthValue, sapTlsStpRxdDesigBridge BridgeId, sapTlsStpRootGuardViolation TruthValue, sapTlsShcvAction TmnxSubShcvAction, sapTlsShcvSrcIp IpAddress, sapTlsShcvSrcMac MacAddress, sapTlsShcvInterval TmnxSubShcvInterval, sapTlsMvplsMgmtMsti MstiInstanceIdOrZero, sapTlsMacMoveNextUpTime Unsigned32, sapTlsMacMoveRateExcdLeft Unsigned32, sapTlsRestProtSrcMacAction INTEGER, sapTlsL2ptForceBoundary TruthValue, sapTlsLimitMacMoveLevel TlsLimitMacMoveLevel, sapTlsBpduTransOper INTEGER, sapTlsDefMsapPolicy TPolicyStatementNameOrEmpty, sapTlsL2ptProtocols L2ptProtocols, sapTlsL2ptForceProtocols L2ptProtocols, sapTlsPppoeMsapTrigger TruthValue, sapTlsDhcpMsapTrigger TruthValue, sapTlsMrpJoinTime Unsigned32, sapTlsMrpLeaveTime Unsigned32, sapTlsMrpLeaveAllTime Unsigned32, sapTlsMrpPeriodicTime Unsigned32, sapTlsMrpPeriodicEnabled TruthValue, sapTlsPppoePolicy TNamedItemOrEmpty, sapTlsArpMsapTrigger TruthValue, sapTlsDefMsapService TmnxServId, sapTlsDefMsapGroupIf TNamedItemOrEmpty, sapTlsMrpPolicy TNamedItemOrEmpty, sapTlsSiteName TNamedItemOrEmpty, sapTlsDhcp6MsapTrigger TruthValue, sapTlsShcvRetryTimeout TmnxSubShcvRetryTimeout, sapTlsShcvRetryCount TmnxSubShcvRetryCount, sapTlsDataSapInstStatus TmnxSapInstStatus, sapTlsDataSapInstLastErr DisplayString, sapTlsMvrpAdminStatus TmnxEnabledDisabled, sapTlsMvrpOperStatus TmnxEnabledDisabled, sapTlsInTcBitBpdus Counter32, sapTlsOutTcBitBpdus Counter32, sapTlsPppMsapTrigger TruthValue, sapTlsPppPolicy TNamedItemOrEmpty, sapTlsTrackSrrpInst Unsigned32, sapTlsPppUserDb TNamedItemOrEmpty, sapTlsPppoeUserDb TNamedItemOrEmpty, sapTlsDhcpUserDb TNamedItemOrEmpty, sapTlsAutoLearnMacProtect TruthValue, sapTlsDhcp6UserDb TNamedItemOrEmpty, sapTlsShcvPolicyIpv4 TNamedItemOrEmpty, sapTlsDataMsapTrigger TruthValue, sapTlsRestProtSrcMacOper TruthValue, sapTlsRestProtSrcMacOperAct INTEGER, sapTlsLastMgmtChange TimeStamp } sapTlsStpAdminStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpAdminStatus specifies whether this SAP participates in the TLS's Spanning Tree Protocol. A SAP with a non-zero sapEthRingIndex does not participate in the TLS's Spanning Tree Protocol. The default value for sapTlsStpAdminStatus for these SAPs is 'disabled' and may not be set to 'enabled'." DEFVAL { enabled } ::= { sapTlsInfoEntry 1 } sapTlsStpPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240." DEFVAL { 128 } ::= { sapTlsInfoEntry 2 } sapTlsStpPortNum OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SAP. Values in the range 2048..4094 are automatically assigned by the agent when the SAP is created or when the value of this object is set to zero via management. Values in the range 1..2047 can be set via management, to allow this object to have a deterministic value across system reboots." ::= { sapTlsInfoEntry 3 } sapTlsStpPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port." DEFVAL { 10 } ::= { sapTlsInfoEntry 4 } sapTlsStpRapidStart OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpRapidStart specifies whether Rapid Start is enabled on this SAP. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SAP are driven by the value of the 'HelloTime' instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state. This parameter is also referred to as 'adminEdge'. " DEFVAL { disabled } ::= { sapTlsInfoEntry 5 } sapTlsStpBpduEncap OBJECT-TYPE SYNTAX INTEGER { dynamic (1), dot1d (2), pvst (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SAP." DEFVAL { dynamic } ::= { sapTlsInfoEntry 6 } sapTlsStpPortState OBJECT-TYPE SYNTAX TStpPortState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state." ::= { sapTlsInfoEntry 7 } sapTlsStpDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." ::= { sapTlsInfoEntry 8 } sapTlsStpDesignatedPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment." ::= { sapTlsInfoEntry 9 } sapTlsStpForwardTransitions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state." ::= { sapTlsInfoEntry 10 } sapTlsStpInConfigBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SAP." ::= { sapTlsInfoEntry 11 } sapTlsStpInTcnBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SAP." ::= { sapTlsInfoEntry 12 } sapTlsStpInBadBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of bad BPDUs received on this SAP." ::= { sapTlsInfoEntry 13 } sapTlsStpOutConfigBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SAP." ::= { sapTlsInfoEntry 14 } sapTlsStpOutTcnBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of Topology Change Notification BPDUs sent out this SAP." ::= { sapTlsInfoEntry 15 } sapTlsStpOperBpduEncap OBJECT-TYPE SYNTAX INTEGER { dynamic (1), dot1d (2), pvst (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SAP." ::= { sapTlsInfoEntry 16 } sapTlsVpnId OBJECT-TYPE SYNTAX VpnId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsVpnId indicates the VPN ID of the associated service." ::= { sapTlsInfoEntry 17 } sapTlsCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID of the associated service." ::= { sapTlsInfoEntry 18 } sapTlsMacAddressLimit OBJECT-TYPE SYNTAX Integer32 (0..511999) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB of this SAP. The value 0 means: no limit for this SAP. The maximum value of sapTlsMacAddressLimit depends on the platform/chassis mode." DEFVAL { 0 } ::= { sapTlsInfoEntry 19 } sapTlsNumMacAddresses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SAP (Both learned and static MAC addresses are counted)." ::= { sapTlsInfoEntry 20 } sapTlsNumStaticMacAddresses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SAP." ::= { sapTlsInfoEntry 21 } sapTlsMacLearning OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsMacLearning specifies whether the MAC learning process is enabled for this SAP. The value is ignored if MAC learning is disabled on service level." DEFVAL { enabled } ::= { sapTlsInfoEntry 22 } sapTlsMacAgeing OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsMacAgeing specifies whether the MAC aging process is enabled for this SAP. the value is ignored if MAC aging is disabled on service level." DEFVAL { enabled } ::= { sapTlsInfoEntry 23 } sapTlsStpOperEdge OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sapTlsStpRapidStart and is set FALSE on reception of a BPDU." REFERENCE "IEEE 802.1t clause 14.8.2, 18.3.4" ::= { sapTlsInfoEntry 24 } sapTlsStpAdminPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue (0), forceFalse (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sap. The value 'forceTrue' means that this port should always be treated as if it is connected to a point-to-point link. The value of 'forceFalse' means that this port should be treated as having a shared media connection." REFERENCE "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" DEFVAL { forceTrue } ::= { sapTlsInfoEntry 25 } sapTlsStpPortRole OBJECT-TYPE SYNTAX StpPortRole MAX-ACCESS read-only STATUS current DESCRIPTION "sapTlsStpPortRole indicates the current role of the sap as defined by the Rapid Spanning Tree Protocol." ::= { sapTlsInfoEntry 26 } sapTlsStpAutoEdge OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "sapTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol." DEFVAL { enabled } ::= { sapTlsInfoEntry 27 } sapTlsStpOperProtocol OBJECT-TYPE SYNTAX StpProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "sapTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this SAP. If the protocol is not enabled on this SAP, the value notApplicable is returned." ::= { sapTlsInfoEntry 28 } sapTlsStpInRstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs received on this SAP." ::= { sapTlsInfoEntry 29 } sapTlsStpOutRstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs sent out on this SAP." ::= { sapTlsInfoEntry 30 } sapTlsLimitMacMove OBJECT-TYPE SYNTAX TlsLimitMacMove MAX-ACCESS read-write STATUS current DESCRIPTION "When sapTlsLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on this SAP, and it will block it when the relearn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SAP will not be blocked, and another blockable SAP will be blocked instead." DEFVAL { blockable } ::= { sapTlsInfoEntry 31 } sapTlsDhcpSnooping OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of the object sapTlsDhcpSnooping specifies whether or not DHCP packets received on this SAP will be snooped. This object was made obsolete in the 3.0 release." DEFVAL { disabled } ::= { sapTlsInfoEntry 32 } sapTlsMacPinning OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsMacPinning specifies whether or not MAC address pinning is active on this SAP. The value will be set by default to disabled. However for a SAP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator. Setting the value to enable disables relearning of MAC addresses on other SAPs or spoke-SDPs within the same VPLS; the MAC address will hence remain attached to the SAP for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP." ::= { sapTlsInfoEntry 33 } sapTlsDiscardUnknownSource OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "with the object sapTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SAP. When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sapTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead." DEFVAL { disabled } ::= { sapTlsInfoEntry 34 } sapTlsMvplsPruneState OBJECT-TYPE SYNTAX MvplsPruneState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvplsPruneState indicates the mVPLS prune state of the SAP. The object will be set to notApplicable if the SAP is not managed by a mVPLS. If the SAP is managed the state reflects whether or not the SAP is pruned by the STP instance running in the mVPLS instance." ::= { sapTlsInfoEntry 35 } sapTlsMvplsMgmtService OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable." ::= { sapTlsInfoEntry 36 } sapTlsMvplsMgmtPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvplsMgmtPortId indicates the SAP port Id of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable." ::= { sapTlsInfoEntry 37 } sapTlsMvplsMgmtEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvplsMgmtEncapValue indicates the SAP Encap value of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable." ::= { sapTlsInfoEntry 38 } sapTlsArpReplyAgent OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), enabledWithSubscrIdent (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with this SAP. disabled: the ARP reply function is not operational enabled: the ARP reply function is enabled without subscriber identification. enabledWithSubscrIdent: the ARP reply function is enabled with subscriber identification." DEFVAL { disabled } ::= { sapTlsInfoEntry 39 } sapTlsStpException OBJECT-TYPE SYNTAX StpExceptionCondition MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpException indicates whether an STP exception condition is present on this Sap. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link." ::= { sapTlsInfoEntry 40 } sapTlsAuthenticationPolicy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsAuthenticationPolicy specifies which subscriber authentication policy must be applied when a DHCP msg is received on the interface. The authentication policies must be defined in tmnxSubAuthPlcyTable. The policy will only be applied when sapTlsDhcpSnoop is enabled." DEFVAL { ''H } ::= { sapTlsInfoEntry 41 } sapTlsL2ptTermination OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsL2ptTermination specifies whether received Layer 2 Protocol Tunnel (L2PT) PDUs are terminated on this port or sap." DEFVAL { disabled } ::= { sapTlsInfoEntry 42 } sapTlsBpduTranslation OBJECT-TYPE SYNTAX TlsBpduTranslation MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsBpduTranslation specifies whether received L2 Protocol Tunnel PDUs are translated before being sent out on this port or sap." DEFVAL { disabled } ::= { sapTlsInfoEntry 43 } sapTlsStpRootGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity." DEFVAL { false } ::= { sapTlsInfoEntry 44 } sapTlsStpInsideRegion OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpInsideRegion indicates whether the network connected to the SAP is in the same MST region. It corresponds to the parameter 'infoInternal' in 802.1Q." ::= { sapTlsInfoEntry 45 } sapTlsEgressMcastGroup OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of the object sapTlsEgressMcastGroup specifies the Egress Multicast Group this SAP belongs to." DEFVAL { "" } ::= { sapTlsInfoEntry 46 } sapTlsStpInMstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs received on this SAP." ::= { sapTlsInfoEntry 47 } sapTlsStpOutMstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs sent out on this SAP." ::= { sapTlsInfoEntry 48 } sapTlsRestProtSrcMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of sapTlsRestProtSrcMacAction is 'disable', then the SAP where the protected source MAC was seen will be brought operationally down." DEFVAL { false } ::= { sapTlsInfoEntry 49 } sapTlsRestUnprotDstMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsRestUnprotDstMac specifies how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped." DEFVAL { false } ::= { sapTlsInfoEntry 50 } sapTlsStpRxdDesigBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SAP. It identifies which bridge is connected to the SAP." ::= { sapTlsInfoEntry 51 } sapTlsStpRootGuardViolation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsStpRootGuardViolation indicates whether there is a root-guard violation at the present time. This can only happen when sapTlsStpRootGuard is set to true." ::= { sapTlsInfoEntry 52 } sapTlsShcvAction OBJECT-TYPE SYNTAX TmnxSubShcvAction MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsShcvAction indicates whether any action should be triggered when the connectivity check fails." DEFVAL { alarm } ::= { sapTlsInfoEntry 53 } sapTlsShcvSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified." ::= { sapTlsInfoEntry 54 } sapTlsShcvSrcMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified." ::= { sapTlsInfoEntry 55 } sapTlsShcvInterval OBJECT-TYPE SYNTAX TmnxSubShcvInterval UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking." DEFVAL { 0 } ::= { sapTlsInfoEntry 56 } sapTlsMvplsMgmtMsti OBJECT-TYPE SYNTAX MstiInstanceIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMvplsMgmtMsti indicates the MST-instance in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. A value of 0 indicates the CIST. This object is only valid if sapTlsMvplsPruneState is different from notApplicable." ::= { sapTlsInfoEntry 57 } sapTlsMacMoveNextUpTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMacMoveNextUpTime counts down the time in seconds until a SAP that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, tmnxSapOperFlags 'relearnLimitExceeded', is automatically brought up again. When this value is 0xffff, the SAP will never be automatically brought up. When sapOperStatus is 'up', this object counts down the time in seconds until the value of sapTlsMacMoveRateExcdLeft is reset." ::= { sapTlsInfoEntry 58 } sapTlsMacMoveRateExcdLeft OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMacMoveRateExcdLeft counts down the number of times this SAP can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up." ::= { sapTlsInfoEntry 59 } sapTlsRestProtSrcMacAction OBJECT-TYPE SYNTAX INTEGER { disable (1), alarm-only (2), discardFrame (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarm-only', the SAP will be left up and only a notification, sapReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SAP will start discarding the frame in addition to generating sapReceivedProtSrcMac notification." DEFVAL { disable } ::= { sapTlsInfoEntry 60 } sapTlsL2ptForceBoundary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsL2ptForceBoundary specifies if sapTlsL2ptTermination is enforced for its managed SAPs. Setting the value of the object sapTlsL2ptForceBoundary of a SAP in a Management VPLS to `true' forces all its managed SAPs to have sapTlsL2ptTermination enabled. This value can only be `true' if the SAP belongs to a management VPLS. If this SAP has managed SAPs already with sapTlsL2ptTermination disabled, it is not allowed to set sapTlsL2ptForceBoundary to `true'." DEFVAL { false } ::= { sapTlsInfoEntry 61 } sapTlsLimitMacMoveLevel OBJECT-TYPE SYNTAX TlsLimitMacMoveLevel MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsLimitMacMoveLevel specifies the hierarchy in which SAPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)" DEFVAL { tertiary } ::= { sapTlsInfoEntry 62 } sapTlsBpduTransOper OBJECT-TYPE SYNTAX INTEGER { undefined (1), disabled (2), pvst (3), stp (4), pvst-rw (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsBpduTransOper indicates the operational bpdu encapsulation used for BPDU translated frames." ::= { sapTlsInfoEntry 63 } sapTlsDefMsapPolicy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDefMsapPolicy specifies the default Managed SAP policy to use to create Managed SAPs when the response from the Radius server does not specify a Managed SAP policy. The value of sapTlsDefMsapPolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The Managed SAP policy must be defined in msapPlcyTable, otherwise an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { sapTlsInfoEntry 64 } sapTlsL2ptProtocols OBJECT-TYPE SYNTAX L2ptProtocols MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsL2ptProtocols specifies which L2 Protocol Tunnel PDUs are terminated on this port or sap." DEFVAL { {stp} } ::= { sapTlsInfoEntry 65 } sapTlsL2ptForceProtocols OBJECT-TYPE SYNTAX L2ptProtocols MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsL2ptForceProtocols specifies which L2 Protocol Tunnel PDUs must be terminated by SAPs managed by this SAP. This object is only relevant if the value of the object sapTlsL2ptForceBoundary is 'true'. For every SAP managed by this SAP, each L2 protocol specified by sapTlsL2ptForceProtocols must be terminated, while other L2 protocols may or may not be terminated, depending on the value of sapTlsL2ptProtocols of that managed SAP." DEFVAL { {stp} } ::= { sapTlsInfoEntry 66 } sapTlsPppoeMsapTrigger OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsPppoeMsapTrigger specifies whether the receipt of PPPoE trigger packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error." DEFVAL { false } ::= { sapTlsInfoEntry 67 } sapTlsDhcpMsapTrigger OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpMsapTrigger specifies whether the receipt of DHCP trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsDhcpMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error." DEFVAL { false } ::= { sapTlsInfoEntry 68 } sapTlsMrpJoinTime OBJECT-TYPE SYNTAX Unsigned32 (1..10) UNITS "deciseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsMrpJoinTime specifies a timer value in 10ths of seconds which determines the maximum rate at which attribute join messages can be sent on the SAP." DEFVAL { 2 } ::= { sapTlsInfoEntry 69 } sapTlsMrpLeaveTime OBJECT-TYPE SYNTAX Unsigned32 (30..60) UNITS "deciseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsMrpLeaveTime specifies a timer value in 10ths of seconds which determines the amount of time a registered attribute is held in leave state before the registration is removed." DEFVAL { 30 } ::= { sapTlsInfoEntry 70 } sapTlsMrpLeaveAllTime OBJECT-TYPE SYNTAX Unsigned32 (60..300) UNITS "deciseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsMrpLeaveAllTime specifies the a timer value in 10ths of seconds which determines the frequency where all attribute declarations on the SAP are all refreshed." DEFVAL { 100 } ::= { sapTlsInfoEntry 71 } sapTlsMrpPeriodicTime OBJECT-TYPE SYNTAX Unsigned32 (10..100) UNITS "deciseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsMrpPeriodicTime specifies a timer value in 10ths of seconds which determines the frequency of retransmission of attribute declarations." DEFVAL { 10 } ::= { sapTlsInfoEntry 72 } sapTlsMrpPeriodicEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsMrpPeriodicEnabled specifies whether retransmission of attribute declarations is enabled." DEFVAL { false } ::= { sapTlsInfoEntry 73 } sapTlsPppoePolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsPppoePolicy specifies the PPPoE policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs via PPPoE with PAP/CHAP authentication. The value of sapTlsPppoePolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppoePolicy is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oE' or 'oEoA'. In general, the default value is empty; for a SAP with a sapSubType value of 'capture', the default value is equal to default." DEFVAL { "" } ::= { sapTlsInfoEntry 74 } sapTlsArpMsapTrigger OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsArpMsapTrigger specifies whether the receipt of ARP trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsArpMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error." DEFVAL { false } ::= { sapTlsInfoEntry 75 } sapTlsDefMsapService OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDefMsapService specifies the service ID of the service where Managed SAPs are created when there is no Radius server available, or the Radius server does not specify the service ID. The value of sapTlsDefMsapService is only relevant for a SAP with a sapSubType value of 'capture'. While the value of sapTlsDefMsapService is equal to zero, no Managed SAPs are created when there is no Radius server-specified service ID available. For a SAP with a sapSubType value other than 'capture', zero is the only value allowed." DEFVAL { 0 } ::= { sapTlsInfoEntry 76 } sapTlsDefMsapGroupIf OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDefMsapGroupIf specifies the name of the group interface where Managed SAPs are created when there is no Radius server available, or the Radius server does not specify the group interface. The value of sapTlsDefMsapGroupIf is only relevant for a SAP with a sapSubType value of 'capture'. While the value of sapTlsDefMsapGroupIf is the empty string, no Managed SAPs are created when there is no Radius server-specified group interface available. For a SAP with a sapSubType value other than 'capture', zero is the only value allowed." DEFVAL { "" } ::= { sapTlsInfoEntry 77 } sapTlsMrpPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsMrpPolicy specifies the mrp policy to control which Group BMAC attributes will advertise on the egress SAP-SDP." DEFVAL { "" } ::= { sapTlsInfoEntry 78 } sapTlsSiteName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsSiteName indicates the site-name associated with this SAP." ::= { sapTlsInfoEntry 79 } sapTlsDhcp6MsapTrigger OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcp6MsapTrigger specifies whether the receipt of DHCPv6 trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsDhcp6MsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error." DEFVAL { false } ::= { sapTlsInfoEntry 80 } sapTlsShcvRetryTimeout OBJECT-TYPE SYNTAX TmnxSubShcvRetryTimeout UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsShcvRetryTimeout specifies the timeout in seconds before a connectivity check retransmission." DEFVAL { 10 } ::= { sapTlsInfoEntry 81 } sapTlsShcvRetryCount OBJECT-TYPE SYNTAX TmnxSubShcvRetryCount MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsShcvRetryCount specifies the number of connectivity check retransmissions. Setting the value to n specifies that, for any given host, at most (n+1) probes are done each interval, and (n+1) missed replies are considered as a connectivity failure." DEFVAL { 2 } ::= { sapTlsInfoEntry 82 } sapTlsDataSapInstStatus OBJECT-TYPE SYNTAX TmnxSapInstStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsDataSapInstStatus indicates the status of the SAP which is instantiating other SAPs controlled by this SAP. This object is valid for services with TIMETRA-SERV-MIB::svcMgmtVpls set to 'true'." ::= { sapTlsInfoEntry 83 } sapTlsDataSapInstLastErr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsDataSapInstLastErr indicates last error encountered while instantiating SAPs controlled by this SAP. This object is valid for services with TIMETRA-SERV-MIB::svcMgmtVpls set to 'true'." ::= { sapTlsInfoEntry 84 } sapTlsMvrpAdminStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsMvrpAdminStatus specifies whether MVRP is enabled on this SAP. The default value of sapTlsMvrpAdminStatus is set to 'enabled' for MVRP enabled services." DEFVAL { disabled } ::= { sapTlsInfoEntry 85 } sapTlsMvrpOperStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvrpOperStatus indicates operational status of MVRP on this SAP." ::= { sapTlsInfoEntry 86 } sapTlsInTcBitBpdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsInTcBitBpdus indicates the number of BPDUs received on this SAP with the Topology Change bit set." ::= { sapTlsInfoEntry 87 } sapTlsOutTcBitBpdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsOutTcBitBpdus indicates the number of BPDUs sent out this SAP with the Topology Change bit set." ::= { sapTlsInfoEntry 88 } sapTlsPppMsapTrigger OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsPppMsapTrigger specifies whether the receipt of PPP trigger packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error." DEFVAL { false } ::= { sapTlsInfoEntry 89 } sapTlsPppPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsPppPolicy specifies the policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs via PPP with PAP/CHAP authentication. The value of sapTlsPppPolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppPolicy is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oA', as opposed to 'oE' or 'oEoA'. In general, the default value is empty; for a SAP with a sapSubType value of 'capture', the default value is equal to default." DEFVAL { "" } ::= { sapTlsInfoEntry 90 } sapTlsTrackSrrpInst OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsTrackSrrpInst specifies the SRRP instance to track." DEFVAL { 0 } ::= { sapTlsInfoEntry 91 } sapTlsPppUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsPppUserDb specifies the local user database to use for PPP PAP/CHAP based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of sapTlsPppUserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppUserDb is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oA', as opposed to 'oE' or 'oEoA'." DEFVAL { "" } ::= { sapTlsInfoEntry 92 } sapTlsPppoeUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsPppoeUserDb specifies the local user database to use for PPPoE PADI PAP/CHAP based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of sapTlsPppoeUserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppoeUserDb is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oE' or 'oEoA', as opposed to 'oA'." DEFVAL { "" } ::= { sapTlsInfoEntry 93 } sapTlsDhcpUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpUserDb specifies the local user database to use for DHCP based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of sapTlsDhcpUserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { sapTlsInfoEntry 94 } sapTlsAutoLearnMacProtect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the associated SAP." DEFVAL { false } ::= { sapTlsInfoEntry 95 } sapTlsDhcp6UserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcp6UserDb specifies the local user database to use for DHCP6 based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of sapTlsDhcp6UserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { sapTlsInfoEntry 96 } sapTlsShcvPolicyIpv4 OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsShcvPolicyIpv4 specifies the Subscriber Host Connectivity Verification (SHCV) policy for IPv4 only. A non empty value must correspond to a conceptual row in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubShcvPlcyTable. A non empty value is only allowed while the value of sapTlsShcvInterval is equal to zero." DEFVAL { "" } ::= { sapTlsInfoEntry 98 } sapTlsDataMsapTrigger OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDataMsapTrigger specifies if the receipt of data packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsDataMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error." DEFVAL { false } ::= { sapTlsInfoEntry 99 } sapTlsRestProtSrcMacOper OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsRestProtSrcMacOper indicates the operational state of the Restrict Protected Source MAC feature." ::= { sapTlsInfoEntry 100 } sapTlsRestProtSrcMacOperAct OBJECT-TYPE SYNTAX INTEGER { disable (1), alarm-only (2), discardFrame (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsRestProtSrcMacOperAct indicates the operation state of the Restrict Protected Source MAC action." ::= { sapTlsInfoEntry 101 } sapTlsLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsLastMgmtChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { sapTlsInfoEntry 102 } sapAtmInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapAtmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ATM SAP information." ::= { tmnxSapObjs 4 } sapAtmInfoEntry OBJECT-TYPE SYNTAX SapAtmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific ATM SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapAtmInfoTable 1 } SapAtmInfoEntry ::= SEQUENCE { sapAtmEncapsulation TmnxSapAtmEncapsulation, sapAtmIngressTrafficDescIndex AtmTrafficDescrParamIndex, sapAtmEgressTrafficDescIndex AtmTrafficDescrParamIndex, sapAtmOamAlarmCellHandling ServiceAdminStatus, sapAtmOamTerminate ServiceAdminStatus, sapAtmOamPeriodicLoopback ServiceAdminStatus, sapAtmLLFAdminStatus ServiceAdminStatus, sapAtmLLFOperStatus INTEGER, sapAtmSubPppIndex Unsigned32, sapAtmDetectedEncapsulation TmnxSapAtmEncapsulation, sapAtmIngressTrafficDescIndexOvr AtmTrafficDescrParamIndex, sapAtmEgressTrafficDescIndexOvr AtmTrafficDescrParamIndex } sapAtmEncapsulation OBJECT-TYPE SYNTAX TmnxSapAtmEncapsulation MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the data encapsulation used over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification. The default value depends on the value of the object TIMETRA-SERV-MIB::svcType of the parent service, and, in layer-3 services, on the value of the object iesIfType of the parent interface: svcType (iesIfType) | default sapAtmEncapsulation (name) ----------------------------------------------------------------------- epipe | llcSnapBridgedProtocol8023 (aal5snap-bridged) tls | llcSnapBridgedProtocol8023 (aal5snap-bridged) vprn (service) | llcSnapRoutedProtocol (aal5snap-routed) ies (service) | llcSnapRoutedProtocol (aal5snap-routed) vprn (group) | llcSnapBridgedProtocol8023 (aal5snap-bridged) ies (group) | llcSnapBridgedProtocol8023 (aal5snap-bridged) mirror | llcSnapRoutedProtocol (aal5snap-routed) apipe | not applicable fpipe | not applicable ipipe | llcSnapRoutedProtocol (aal5snap-routed) cpipe | not applicable intTls | not applicable." ::= { sapAtmInfoEntry 1 } sapAtmIngressTrafficDescIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the ingress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification." DEFVAL { 1 } ::= { sapAtmInfoEntry 2 } sapAtmEgressTrafficDescIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the egress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification." DEFVAL { 1 } ::= { sapAtmInfoEntry 3 } sapAtmOamAlarmCellHandling OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "A value of up specifies that the OAM status of a pvc affects the sap operational status and OAM AIS/RDI cell generation upon a sap operational status of down. A value of down specifies that the OAM status of a pvc will not affect the operational status of the associated sap and no OAM AIS/RDI cells are generated." DEFVAL { up } ::= { sapAtmInfoEntry 4 } sapAtmOamTerminate OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The sapAtmOamTerminate object specifies whether this SAP will act as an OAM termination point. If enabled, OAM cells will be sunk by the SAP and can affect the SAP's operational status (if sapAtmOamAlarmCellHandling is also enabled). Otherwise the OAM cells will be passed into the APIPE service. This object is only configurable for ATM SAPs that are part of an APIPE service SDU or VCC mode. If the sapPortId belongs to an Multi-Chassis APS port, the default value is up." DEFVAL { down } ::= { sapAtmInfoEntry 5 } sapAtmOamPeriodicLoopback OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The sapAtmOamPeriodicLoopback object specifies whether this SAP will run periodic OAM loopbacks or not. If enabled, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is not received and tAtmSysOamRetryDown consecutive retries also result in failure, the endpoint will transition to the eteAisLoc state. Once in the eteAisLoc state, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is received for the periodic loopback and tAtmSysOamRetryUp consecutive retries also each receive a response, the endpoint will transition back to the up state. This object is only configurable on IES or VPRN service endpoints." DEFVAL { down } ::= { sapAtmInfoEntry 6 } sapAtmLLFAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "sapAtmLLFAdminStatus specifies whether or not Link- Loss Forwarding is enabled ('up'). When this object is set to 'up' the underlying port will be forced into the operationally 'down' state if the service is operationally 'down', or any of the 'sdpBindPwPeerStatusBits' are set, and will set the underlying port's tmnxPortReasonDownFlags 'linklossFwd' bit. Setting this object to 'down' will clear the 'linklossFwd' reason. sapAtmLLFAdminStatus can only be enabled on saps configured for an APIPE service using an port with the tmnxPortEncapType set to 'atmEncap' and sapEncapValue set for ATM ports." DEFVAL { down } ::= { sapAtmInfoEntry 7 } sapAtmLLFOperStatus OBJECT-TYPE SYNTAX INTEGER { fault (1), clear (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "sapAtmLLFOperStatus indicates whether or not the underlying port is forced operationally 'down' due to the service being operationally 'down' or an sdpBindPwPeerStatusBits bit is set. sapAtmLLFOperStatus is set to 'fault' when the sapAtmLLFAdminStatus is set to 'up,' and either a fault has occurred on the pseudo-wire, or the service is down, otherwise sapAtmLLFOperStatus is set to 'clear.'" ::= { sapAtmInfoEntry 8 } sapAtmSubPppIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapAtmSubPppIndex indicates the local identifier of the subscriber PPP session. It is the index of the corresponding conceptual row in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppTable. The value zero indicates that there is no subscriber PPP session associated with this SAP." ::= { sapAtmInfoEntry 10 } sapAtmDetectedEncapsulation OBJECT-TYPE SYNTAX TmnxSapAtmEncapsulation MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the AAL5 data encapsulation detected by PPPoA (PPP over ATM) or PPPoEoA (PPP over Ethernet over ATM). The value is only applicable if sapAtmEncapsulation is set to 'auto' and returns 'unknown' as long as no encapsulation is detected. If sapAtmEncapsulation is set to a value different than 'auto', sapAtmDetectedEncapsulation always returns the same value as sapAtmEncapsulation." ::= { sapAtmInfoEntry 11 } sapAtmIngressTrafficDescIndexOvr OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex (0 | 1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the index of the ATM ingress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given." ::= { sapAtmInfoEntry 12 } sapAtmEgressTrafficDescIndexOvr OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex (0 | 1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the index of the ATM egress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given." ::= { sapAtmInfoEntry 13 } sapBaseStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic SAP statistics. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip." ::= { tmnxSapObjs 6 } sapBaseStatsEntry OBJECT-TYPE SYNTAX SapBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic statistics about a specific SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapBaseStatsTable 1 } SapBaseStatsEntry ::= SEQUENCE { sapBaseStatsIngressPchipDroppedPackets Counter64, sapBaseStatsIngressPchipDroppedOctets Counter64, sapBaseStatsIngressPchipOfferedHiPrioPackets Counter64, sapBaseStatsIngressPchipOfferedHiPrioOctets Counter64, sapBaseStatsIngressPchipOfferedLoPrioPackets Counter64, sapBaseStatsIngressPchipOfferedLoPrioOctets Counter64, sapBaseStatsIngressQchipDroppedHiPrioPackets Counter64, sapBaseStatsIngressQchipDroppedHiPrioOctets Counter64, sapBaseStatsIngressQchipDroppedLoPrioPackets Counter64, sapBaseStatsIngressQchipDroppedLoPrioOctets Counter64, sapBaseStatsIngressQchipForwardedInProfPackets Counter64, sapBaseStatsIngressQchipForwardedInProfOctets Counter64, sapBaseStatsIngressQchipForwardedOutProfPackets Counter64, sapBaseStatsIngressQchipForwardedOutProfOctets Counter64, sapBaseStatsEgressQchipDroppedInProfPackets Counter64, sapBaseStatsEgressQchipDroppedInProfOctets Counter64, sapBaseStatsEgressQchipDroppedOutProfPackets Counter64, sapBaseStatsEgressQchipDroppedOutProfOctets Counter64, sapBaseStatsEgressQchipForwardedInProfPackets Counter64, sapBaseStatsEgressQchipForwardedInProfOctets Counter64, sapBaseStatsEgressQchipForwardedOutProfPackets Counter64, sapBaseStatsEgressQchipForwardedOutProfOctets Counter64, sapBaseStatsCustId TmnxCustId, sapBaseStatsIngressPchipOfferedUncoloredPackets Counter64, sapBaseStatsIngressPchipOfferedUncoloredOctets Counter64, sapBaseStatsAuthenticationPktsDiscarded Counter32, sapBaseStatsAuthenticationPktsSuccess Counter32, sapBaseStatsLastClearedTime TimeStamp, sapBaseStatsIngressCPMPackets Counter64, sapBaseStatsIngressCPMPacketsHi Counter32, sapBaseStatsIngressCPMPacketsLo Counter32, sapBaseStatsIngressCPMOctets Counter64, sapBaseStatsIngressCPMOctetsHi Counter32, sapBaseStatsIngressCPMOctetsLo Counter32, sapBaseStatsIngPchipRcvdValidPkt Counter64, sapBaseStatsIngPchipRcvdValidOct Counter64, sapBaseStatsIngAggregateOffPkts Counter64, sapBaseStatsIngAggregateOffOcts Counter64, sapBaseStatsIngAggregateFwdPkts Counter64, sapBaseStatsIngAggregateFwdOcts Counter64, sapBaseStatsEgrAggregateFwdPkts Counter64, sapBaseStatsEgrAggregateFwdOcts Counter64, sapBaseStatsIngAggregateDropPkts Counter64, sapBaseStatsIngAggregateDropOcts Counter64, sapBaseStatsEgrAggregateDropPkts Counter64, sapBaseStatsEgrAggregateDropOcts Counter64 } sapBaseStatsIngressPchipDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc." ::= { sapBaseStatsEntry 1 } sapBaseStatsIngressPchipDroppedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc." ::= { sapBaseStatsEntry 2 } sapBaseStatsIngressPchipOfferedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 3 } sapBaseStatsIngressPchipOfferedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 4 } sapBaseStatsIngressPchipOfferedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 5 } sapBaseStatsIngressPchipOfferedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 6 } sapBaseStatsIngressQchipDroppedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 7 } sapBaseStatsIngressQchipDroppedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 8 } sapBaseStatsIngressQchipDroppedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 9 } sapBaseStatsIngressQchipDroppedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 10 } sapBaseStatsIngressQchipForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip." ::= { sapBaseStatsEntry 11 } sapBaseStatsIngressQchipForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip." ::= { sapBaseStatsEntry 12 } sapBaseStatsIngressQchipForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip." ::= { sapBaseStatsEntry 13 } sapBaseStatsIngressQchipForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip." ::= { sapBaseStatsEntry 14 } sapBaseStatsEgressQchipDroppedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 15 } sapBaseStatsEgressQchipDroppedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 16 } sapBaseStatsEgressQchipDroppedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 17 } sapBaseStatsEgressQchipDroppedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 18 } sapBaseStatsEgressQchipForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the egress Qchip." ::= { sapBaseStatsEntry 19 } sapBaseStatsEgressQchipForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the egress Qchip." ::= { sapBaseStatsEntry 20 } sapBaseStatsEgressQchipForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapBaseStatsEntry 21 } sapBaseStatsEgressQchipForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapBaseStatsEntry 22 } sapBaseStatsCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { sapBaseStatsEntry 23 } sapBaseStatsIngressPchipOfferedUncoloredPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 24 } sapBaseStatsIngressPchipOfferedUncoloredOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 25 } sapBaseStatsAuthenticationPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP packets discarded as result of authentication." ::= { sapBaseStatsEntry 26 } sapBaseStatsAuthenticationPktsSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP packets successfully authenticated." ::= { sapBaseStatsEntry 27 } sapBaseStatsLastClearedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsLastClearedTime indicates the sysUpTime when the counters in this table were last cleared." ::= { sapBaseStatsEntry 28 } sapBaseStatsIngressCPMPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngressCPMPackets indicates ingress traffic in terms of packets destined to CPM associated with this SAP." ::= { sapBaseStatsEntry 29 } sapBaseStatsIngressCPMPacketsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngressCPMPacketsHi indicates upper 32 bits of sapBaseStatsIngressCPMPackets object." ::= { sapBaseStatsEntry 30 } sapBaseStatsIngressCPMPacketsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngressCPMPacketsLo indicates lower 32 bits of sapBaseStatsIngressCPMPackets object." ::= { sapBaseStatsEntry 31 } sapBaseStatsIngressCPMOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngressCPMOctets indicates ingress traffic in terms of bytes destined to CPM associated with this SAP." ::= { sapBaseStatsEntry 32 } sapBaseStatsIngressCPMOctetsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngressCPMOctetsHi indicates upper 32 bits of sapBaseStatsIngressCPMOctets object." ::= { sapBaseStatsEntry 33 } sapBaseStatsIngressCPMOctetsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngressCPMOctetsLo indicates lower 32 bits of sapBaseStatsIngressCPMOctets object." ::= { sapBaseStatsEntry 34 } sapBaseStatsIngPchipRcvdValidPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngPchipRcvdValidPkt indicates number of received valid packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 35 } sapBaseStatsIngPchipRcvdValidOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngPchipRcvdValidOct indicates number of received valid octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapBaseStatsEntry 36 } sapBaseStatsIngAggregateOffPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngAggregateOffPkts indicates the aggregate number of hi, lo priority and uncolour packets offered by the ingress Pchip to Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 37 } sapBaseStatsIngAggregateOffOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngAggregateOffOcts indicates the aggregate number of hi, lo priority and uncolour octets offered by the ingress Pchip to Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 38 } sapBaseStatsIngAggregateFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngAggregateFwdPkts indicates the aggregate number of in and out-of profile packets (rate above CIR) forwarded by the ingress Qchip." ::= { sapBaseStatsEntry 39 } sapBaseStatsIngAggregateFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngAggregateFwdOcts indicates the aggregated number of in and out-of profile octets (rate above CIR) forwarded by the ingress Qchip." ::= { sapBaseStatsEntry 40 } sapBaseStatsEgrAggregateFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsEgrAggregateFwdPkts indicates the aggregate number of in and out-of profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapBaseStatsEntry 41 } sapBaseStatsEgrAggregateFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsEgrAggregateFwdOcts indicates the aggregated number of in and out-of profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapBaseStatsEntry 42 } sapBaseStatsIngAggregateDropPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngAggregateDropPkts indicates the aggregate number of hi and lo profile packets discarded by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 43 } sapBaseStatsIngAggregateDropOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsIngAggregateDropOcts indicates the aggregate number of hi and lo profile octets discarded by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 44 } sapBaseStatsEgrAggregateDropPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsEgrAggregateDropPkts indicates the aggregate number of in and out-of profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 45 } sapBaseStatsEgrAggregateDropOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseStatsEgrAggregateDropOcts indicates the aggregate number of in and out-of profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapBaseStatsEntry 46 } sapIngQosQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ingress QoS queue SAP statistics." ::= { tmnxSapObjs 7 } sapIngQosQueueStatsEntry OBJECT-TYPE SYNTAX SapIngQosQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress statistics about a specific SAP's QoS queue." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosQueueId } ::= { sapIngQosQueueStatsTable 1 } SapIngQosQueueStatsEntry ::= SEQUENCE { sapIngQosQueueId TSapIngQueueId, sapIngQosQueueStatsOfferedHiPrioPackets Counter64, sapIngQosQueueStatsDroppedHiPrioPackets Counter64, sapIngQosQueueStatsOfferedLoPrioPackets Counter64, sapIngQosQueueStatsDroppedLoPrioPackets Counter64, sapIngQosQueueStatsOfferedHiPrioOctets Counter64, sapIngQosQueueStatsDroppedHiPrioOctets Counter64, sapIngQosQueueStatsOfferedLoPrioOctets Counter64, sapIngQosQueueStatsDroppedLoPrioOctets Counter64, sapIngQosQueueStatsForwardedInProfPackets Counter64, sapIngQosQueueStatsForwardedOutProfPackets Counter64, sapIngQosQueueStatsForwardedInProfOctets Counter64, sapIngQosQueueStatsForwardedOutProfOctets Counter64, sapIngQosCustId TmnxCustId, sapIngQosQueueStatsUncoloredPacketsOffered Counter64, sapIngQosQueueStatsUncoloredOctetsOffered Counter64 } sapIngQosQueueId OBJECT-TYPE SYNTAX TSapIngQueueId MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ingress QoS queue of this SAP." ::= { sapIngQosQueueStatsEntry 1 } sapIngQosQueueStatsOfferedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosQueueStatsEntry 2 } sapIngQosQueueStatsDroppedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosQueueStatsEntry 3 } sapIngQosQueueStatsOfferedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosQueueStatsEntry 4 } sapIngQosQueueStatsDroppedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosQueueStatsEntry 5 } sapIngQosQueueStatsOfferedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosQueueStatsEntry 6 } sapIngQosQueueStatsDroppedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosQueueStatsEntry 7 } sapIngQosQueueStatsOfferedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosQueueStatsEntry 8 } sapIngQosQueueStatsDroppedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosQueueStatsEntry 9 } sapIngQosQueueStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngQosQueueStatsEntry 10 } sapIngQosQueueStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngQosQueueStatsEntry 11 } sapIngQosQueueStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngQosQueueStatsEntry 12 } sapIngQosQueueStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngQosQueueStatsEntry 13 } sapIngQosCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { sapIngQosQueueStatsEntry 14 } sapIngQosQueueStatsUncoloredPacketsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored packets offered to the ingress Qchip." ::= { sapIngQosQueueStatsEntry 15 } sapIngQosQueueStatsUncoloredOctetsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored octets offered to the ingress Qchip." ::= { sapIngQosQueueStatsEntry 16 } sapEgrQosQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains egress QoS queue SAP statistics." ::= { tmnxSapObjs 8 } sapEgrQosQueueStatsEntry OBJECT-TYPE SYNTAX SapEgrQosQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific SAP's QoS queue." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosQueueId } ::= { sapEgrQosQueueStatsTable 1 } SapEgrQosQueueStatsEntry ::= SEQUENCE { sapEgrQosQueueId TSapEgrQueueId, sapEgrQosQueueStatsForwardedInProfPackets Counter64, sapEgrQosQueueStatsDroppedInProfPackets Counter64, sapEgrQosQueueStatsForwardedOutProfPackets Counter64, sapEgrQosQueueStatsDroppedOutProfPackets Counter64, sapEgrQosQueueStatsForwardedInProfOctets Counter64, sapEgrQosQueueStatsDroppedInProfOctets Counter64, sapEgrQosQueueStatsForwardedOutProfOctets Counter64, sapEgrQosQueueStatsDroppedOutProfOctets Counter64, sapEgrQosCustId TmnxCustId, sapEgrQosQStatsFwdExdProfPkts Counter64, sapEgrQosQStatsDrpExdProfPkts Counter64, sapEgrQosQStatsFwdExdProfOcts Counter64, sapEgrQosQStatsDrpExdProfOcts Counter64, sapEgrQosQStatsFwdInPlusProfPkts Counter64, sapEgrQosQStatsDrpInPlusProfPkts Counter64, sapEgrQosQStatsFwdInPlusProfOcts Counter64, sapEgrQosQStatsDrpInPlusProfOcts Counter64, sapEgrQosQStatsFwdPkts Counter64, sapEgrQosQStatsDrpPkts Counter64, sapEgrQosQStatsFwdOcts Counter64, sapEgrQosQStatsDrpOcts Counter64 } sapEgrQosQueueId OBJECT-TYPE SYNTAX TSapEgrQueueId MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the egress QoS queue of this SAP." ::= { sapEgrQosQueueStatsEntry 1 } sapEgrQosQueueStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosQueueStatsEntry 2 } sapEgrQosQueueStatsDroppedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosQueueStatsEntry 3 } sapEgrQosQueueStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosQueueStatsEntry 4 } sapEgrQosQueueStatsDroppedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosQueueStatsEntry 5 } sapEgrQosQueueStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosQueueStatsEntry 6 } sapEgrQosQueueStatsDroppedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosQueueStatsEntry 7 } sapEgrQosQueueStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosQueueStatsEntry 8 } sapEgrQosQueueStatsDroppedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosQueueStatsEntry 9 } sapEgrQosCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { sapEgrQosQueueStatsEntry 10 } sapEgrQosQStatsFwdExdProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of exceed-profile packets forwarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 11 } sapEgrQosQStatsDrpExdProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of exceed-profile packets discarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 12 } sapEgrQosQStatsFwdExdProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of exceed-profile octets forwarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 13 } sapEgrQosQStatsDrpExdProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of exceed-profile octets discarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 14 } sapEgrQosQStatsFwdInPlusProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inplus-profile packets forwarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 15 } sapEgrQosQStatsDrpInPlusProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inplus-profile packets discarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 16 } sapEgrQosQStatsFwdInPlusProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inplus-profile octets forwarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 17 } sapEgrQosQStatsDrpInPlusProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inplus-profile octets discarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 18 } sapEgrQosQStatsFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets forwarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 19 } sapEgrQosQStatsDrpPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 20 } sapEgrQosQStatsFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets forwarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 21 } sapEgrQosQStatsDrpOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets discarded on this egress queue." ::= { sapEgrQosQueueStatsEntry 22 } sapIngQosSchedStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ingress QoS queue SAP statistics." ::= { tmnxSapObjs 9 } sapIngQosSchedStatsEntry OBJECT-TYPE SYNTAX SapIngQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress statistics about a specific SAP's QoS queue." INDEX { svcId, sapPortId, sapEncapValue, IMPLIED sapIngQosSchedName } ::= { sapIngQosSchedStatsTable 1 } SapIngQosSchedStatsEntry ::= SEQUENCE { sapIngQosSchedName TNamedItem, sapIngQosSchedStatsForwardedPackets Counter64, sapIngQosSchedStatsForwardedOctets Counter64, sapIngQosSchedCustId TmnxCustId } sapIngQosSchedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the ingress QoS scheduler of this SAP." ::= { sapIngQosSchedStatsEntry 1 } sapIngQosSchedStatsForwardedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapIngQosSchedStatsEntry 2 } sapIngQosSchedStatsForwardedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapIngQosSchedStatsEntry 3 } sapIngQosSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { sapIngQosSchedStatsEntry 4 } sapEgrQosSchedStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ingress QoS queue SAP statistics." ::= { tmnxSapObjs 10 } sapEgrQosSchedStatsEntry OBJECT-TYPE SYNTAX SapEgrQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific SAP's QoS queue." INDEX { svcId, sapPortId, sapEncapValue, IMPLIED sapEgrQosSchedName } ::= { sapEgrQosSchedStatsTable 1 } SapEgrQosSchedStatsEntry ::= SEQUENCE { sapEgrQosSchedName TNamedItem, sapEgrQosSchedStatsForwardedPackets Counter64, sapEgrQosSchedStatsForwardedOctets Counter64, sapEgrQosSchedCustId TmnxCustId } sapEgrQosSchedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the egress QoS scheduler of this SAP." ::= { sapEgrQosSchedStatsEntry 1 } sapEgrQosSchedStatsForwardedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of forwarded packets by the egress Qchip, as determined by the SAP egress scheduler policy." ::= { sapEgrQosSchedStatsEntry 2 } sapEgrQosSchedStatsForwardedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of forwarded octets by the egress Qchip, as determined by the SAP egress scheduler policy." ::= { sapEgrQosSchedStatsEntry 3 } sapEgrQosSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { sapEgrQosSchedStatsEntry 4 } sapTlsManagedVlanListTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsManagedVlanListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used only for SAPs that are part of a management VPLS. It indicates for each SAP the ranges of associated VLANs that will be affected when the SAP changes state." ::= { tmnxSapObjs 11 } sapTlsManagedVlanListEntry OBJECT-TYPE SYNTAX SapTlsManagedVlanListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row specifies a range of VLANs associated with a SAP of a MVPLS. Ranges may contains overlapping sections only for Mvpls SAPs that belong to the same service." INDEX { svcId, sapPortId, sapEncapValue, sapTlsMvplsMinVlanTag, sapTlsMvplsMaxVlanTag } ::= { sapTlsManagedVlanListTable 1 } SapTlsManagedVlanListEntry ::= SEQUENCE { sapTlsMvplsMinVlanTag Unsigned32, sapTlsMvplsMaxVlanTag Unsigned32, sapTlsMvplsRowStatus RowStatus } sapTlsMvplsMinVlanTag OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapTlsMvplsMinVlanTag specifies the left bound (i.e. min. value) of a range of VLANs that are associated with the Mvpls SAP. sapTlsMvplsMinVlanTag must be smaller than (or equal to) sapTlsMvplsMaxVlanTag. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP." ::= { sapTlsManagedVlanListEntry 1 } sapTlsMvplsMaxVlanTag OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapTlsMvplsMaxVlanTag specifies the right bound (i.e. max. value) of a range of VLANs that are associated with the Mvpls SAP. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP." ::= { sapTlsManagedVlanListEntry 2 } sapTlsMvplsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTlsMvplsRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. A row (i.e. a range of VLAN tags) can be destroyed only if there are no SAPs defined in regular VPLSes in this range." ::= { sapTlsManagedVlanListEntry 3 } sapAntiSpoofTable OBJECT-TYPE SYNTAX SEQUENCE OF SapAntiSpoofEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The sapAntiSpoofTable contains information about anti-spoofing filters on a SAP." ::= { tmnxSapObjs 12 } sapAntiSpoofEntry OBJECT-TYPE SYNTAX SapAntiSpoofEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the sapAntiSpoofTable." INDEX { sapPortId, sapEncapValue, sapAntiSpoofIpAddress, sapAntiSpoofMacAddress } ::= { sapAntiSpoofTable 1 } SapAntiSpoofEntry ::= SEQUENCE { sapAntiSpoofIpAddress IpAddress, sapAntiSpoofMacAddress MacAddress } sapAntiSpoofIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapAntiSpoofIpAddress indicates the IP address for which this table entry contains information." ::= { sapAntiSpoofEntry 1 } sapAntiSpoofMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapAntiSpoofMacAddress indicates the MAC address for which this table entry contains information." ::= { sapAntiSpoofEntry 2 } sapStaticHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SapStaticHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapStaticHostTable is used to configure static hosts on a SAP." ::= { tmnxSapObjs 13 } sapStaticHostEntry OBJECT-TYPE SYNTAX SapStaticHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information on a statically configured host. Entries can be created and deleted via SNMP SET operations." INDEX { svcId, sapPortId, sapEncapValue, sapStaticHostIpAddress, sapStaticHostMacAddress } ::= { sapStaticHostTable 1 } SapStaticHostEntry ::= SEQUENCE { sapStaticHostRowStatus RowStatus, sapStaticHostIpAddress IpAddress, sapStaticHostMacAddress MacAddress, sapStaticHostSubscrIdent TmnxSubIdentStringOrEmpty, sapStaticHostSubProfile ServObjName, sapStaticHostSlaProfile ServObjName, sapStaticHostShcvOperState INTEGER, sapStaticHostShcvChecks Unsigned32, sapStaticHostShcvReplies Unsigned32, sapStaticHostShcvReplyTime TimeStamp, sapStaticHostDynMacAddress MacAddress, sapStaticHostRetailerSvcId TmnxServId, sapStaticHostRetailerIf InterfaceIndexOrZero, sapStaticHostFwdingState TmnxOperState, sapStaticHostAncpString TmnxAncpStringOrZero, sapStaticHostSubIdIsSapId TruthValue, sapStaticHostAppProfile ServObjName, sapStaticHostIntermediateDestId DisplayString, sapStaticHostAdminStatus ServiceAdminStatus, sapStaticHostFilterProfile TNamedItemOrEmpty, sapStaticHostAdminRetailSvcId TmnxServId, sapStaticHostRipPolicy TNamedItemOrEmpty, sapStatHostAppProfileScope TmnxSapAASubScope } sapStaticHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStaticHostRowStatus controls the creation and deletion of rows in this table." ::= { sapStaticHostEntry 1 } sapStaticHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapStaticHostIpAddress specifies the IP address associated with this static host. The value 0.0.0.0 indicates that no host IP address is specified." ::= { sapStaticHostEntry 2 } sapStaticHostMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapStaticHostMacAddress specifies the MAC address associated with this static host. The value 0:0:0:0:0:0 indicates that no host MAC address is specified." ::= { sapStaticHostEntry 3 } sapStaticHostSubscrIdent OBJECT-TYPE SYNTAX TmnxSubIdentStringOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStaticHostSubscrIdent specifies the subscriber identification for this static host." DEFVAL { "" } ::= { sapStaticHostEntry 4 } sapStaticHostSubProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStaticHostSubProfile specifies the subscriber profile for this static host. The specified subscriber profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable." DEFVAL { "" } ::= { sapStaticHostEntry 5 } sapStaticHostSlaProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStaticHostSlaProfile specifies the SLA profile for this static host. The specified SLA profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable." DEFVAL { "" } ::= { sapStaticHostEntry 6 } sapStaticHostShcvOperState OBJECT-TYPE SYNTAX INTEGER { disabled (1), undefined (2), down (3), up (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStaticHostShcvOperState gives the state of the subscriber host connectivity check for this static host." ::= { sapStaticHostEntry 7 } sapStaticHostShcvChecks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStaticHostShcvChecks indicates the number of connectivity checks for this static host." ::= { sapStaticHostEntry 8 } sapStaticHostShcvReplies OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStaticHostShcvReplies indicates the number of host replies for this static host." ::= { sapStaticHostEntry 9 } sapStaticHostShcvReplyTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStaticHostShcvReplyTime gives the timestamp of the last successful connectivity check for this static host." ::= { sapStaticHostEntry 10 } sapStaticHostDynMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStaticHostDynMacAddress gives the MAC address learned via ARP in case this is an IP-only static host (sapStaticHostMacAddress is set to 0:0:0:0:0:0). The value 0:0:0:0:0:0 indicates that no MAC address is learned yet." ::= { sapStaticHostEntry 11 } sapStaticHostRetailerSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStaticHostRetailerSvcId indicates the service ID of the retailer VPRN service to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN." ::= { sapStaticHostEntry 12 } sapStaticHostRetailerIf OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStaticHostRetailerIf indicates the interface index of the retailer VPRN interface to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN." ::= { sapStaticHostEntry 13 } sapStaticHostFwdingState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStaticHostFwdingState indicates the forwarding state of this static host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded." ::= { sapStaticHostEntry 14 } sapStaticHostAncpString OBJECT-TYPE SYNTAX TmnxAncpStringOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostAncpString specifies the ancp-string associated to this SAP host." DEFVAL { "" } ::= { sapStaticHostEntry 15 } sapStaticHostSubIdIsSapId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStaticHostSubIdIsSapId specifies whether the SAP-id is taken as subscriber identification for this static host." DEFVAL { false } ::= { sapStaticHostEntry 16 } sapStaticHostAppProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostAppProfile specifies the application profile for this static host. The specified application profile needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable." DEFVAL { "" } ::= { sapStaticHostEntry 17 } sapStaticHostIntermediateDestId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostIntermediateDestId specifies to which intermediate destination (for example a DSLAM) this host belongs." DEFVAL { "" } ::= { sapStaticHostEntry 18 } sapStaticHostAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostAdminStatus specifies the administrative status of this host." DEFVAL { down } ::= { sapStaticHostEntry 19 } sapStaticHostFilterProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStaticHostFilterProfile specifies the filter profile for this static host. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable." DEFVAL { "" } ::= { sapStaticHostEntry 20 } sapStaticHostAdminRetailSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostAdminRetailSvcId specifies the forwarding service ID for an unnumbered static host in a wholesale/retail context." DEFVAL { 0 } ::= { sapStaticHostEntry 21 } sapStaticHostRipPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStaticHostRipPolicy specifies the RIP/RIP-NG policy for this static host." DEFVAL { "" } ::= { sapStaticHostEntry 22 } sapStatHostAppProfileScope OBJECT-TYPE SYNTAX TmnxSapAASubScope MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHostAppProfileScope specifies the scope of IPv4 static host application profile. The value of sapStatHostAppProfileScope can only be set along with sapStaticHostAppProfile object, optionally. The value of sapStatHostAppProfileScope cannot be modified once set." DEFVAL { subscriber } ::= { sapStaticHostEntry 23 } sapTlsDhcpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsDhcpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sapTlsDhcpInfoTable contains DHCP information related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system." ::= { tmnxSapObjs 14 } sapTlsDhcpInfoEntry OBJECT-TYPE SYNTAX SapTlsDhcpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " DHCP specific information for a TLS SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTlsDhcpInfoTable 1 } SapTlsDhcpInfoEntry ::= SEQUENCE { sapTlsDhcpAdminState TmnxEnabledDisabled, sapTlsDhcpDescription ServObjDesc, sapTlsDhcpSnoop TmnxEnabledDisabled, sapTlsDhcpLeasePopulate Unsigned32, sapTlsDhcpOperLeasePopulate Unsigned32, sapTlsDhcpInfoAction INTEGER, sapTlsDhcpCircuitId INTEGER, sapTlsDhcpRemoteId INTEGER, sapTlsDhcpRemoteIdString DisplayString, sapTlsDhcpProxyAdminState TmnxEnabledDisabled, sapTlsDhcpProxyServerAddr IpAddress, sapTlsDhcpProxyLeaseTime Unsigned32, sapTlsDhcpProxyLTRadiusOverride TruthValue, sapTlsDhcpVendorIncludeOptions BITS, sapTlsDhcpVendorOptionString DisplayString, sapTlsDhcpRemoteIdHex OCTET STRING, sapTlsDhcpCircuitIdHex OCTET STRING } sapTlsDhcpAdminState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpAdminState specifies the overall enable/disable state of all DHCP related actions on this Sap. The value 'disabled' allows the user to configure individual DHCP commands but administratively disable them." DEFVAL { disabled } ::= { sapTlsDhcpInfoEntry 1 } sapTlsDhcpDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpDescription specifies a user provided description for DHCP on this Sap. It consists of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } ::= { sapTlsDhcpInfoEntry 2 } sapTlsDhcpSnoop OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpSnoop specifies the enable/disable state for DHCP snooping on this Sap. Note that in order for snooping to be enabled the object sapTlsDhcpAdminState must also have the value enabled." DEFVAL { disabled } ::= { sapTlsDhcpInfoEntry 3 } sapTlsDhcpLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..131071) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on this SAP." DEFVAL { 0 } ::= { sapTlsDhcpInfoEntry 4 } sapTlsDhcpOperLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..131071) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP." ::= { sapTlsDhcpInfoEntry 5 } sapTlsDhcpInfoAction OBJECT-TYPE SYNTAX INTEGER { replace (1), drop (2), keep (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option 82 information is also present. 'keep' - retain the existing relay information." DEFVAL { keep } ::= { sapTlsDhcpInfoEntry 6 } sapTlsDhcpCircuitId OBJECT-TYPE SYNTAX INTEGER { none (0), asciiTuple (1), vlanAsciiTuple (2), circuitIdHex (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: - 'none' the circuit-id suboption will not be part of the information option (Option 82). - 'asciiTuple' the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface name is used. - 'vlanAsciiTuple' the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet. - 'circuitIdHex' the circuit-id suboption contains the value of the object sapTlsDhcpCircuitIdHex. " DEFVAL { asciiTuple } ::= { sapTlsDhcpInfoEntry 7 } sapTlsDhcpRemoteId OBJECT-TYPE SYNTAX INTEGER { none (1), mac (2), remoteIdString (3), remoteIdHex (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remoteIdString', sapTlsDhcpRemoteIdString will represent the remote-id. If the value of this object is set to 'remoteIdHex', the remote-id suboption contains the value of the object sapTlsDhcpRemoteIdHex. By default, the remote-id value is none." DEFVAL { none } ::= { sapTlsDhcpInfoEntry 8 } sapTlsDhcpRemoteIdString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpRemoteIdString specifies a remote-id string. a non-empty value is only supported while the value of sapTlsDhcpRemoteId is equal to 'remoteIdString'." DEFVAL { "" } ::= { sapTlsDhcpInfoEntry 9 } sapTlsDhcpProxyAdminState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpProxyAdminState specifies the desired administrative state of the proxy server on this interface. Note that in order for the proxy server to be enabled, the value of sapTlsDhcpAdminState must also be 'enabled'." DEFVAL { disabled } ::= { sapTlsDhcpInfoEntry 10 } sapTlsDhcpProxyServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server in the context of this VPLS SAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by this VPLS." DEFVAL { '00000000'H } ::= { sapTlsDhcpInfoEntry 11 } sapTlsDhcpProxyLeaseTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 300..315446399) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time." DEFVAL { 0 } ::= { sapTlsDhcpInfoEntry 12 } sapTlsDhcpProxyLTRadiusOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy server will always make use of sapTlsDhcpProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When sapTlsDhcpProxyLTRadiusOverride is set to 'true', the proxy server will use the lease time information provided by the RADIUS server, regardless of the configured one." DEFVAL { false } ::= { sapTlsDhcpInfoEntry 13 } sapTlsDhcpVendorIncludeOptions OBJECT-TYPE SYNTAX BITS { systemId (0), clientMac (1), serviceId (2), sapId (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpVendorIncludeOptions specifies what is encoded in the Nokia vendor specific sub-option of option 82. The value of this object is only used when sapTlsDhcpInfoAction is 'replace'." DEFVAL { {} } ::= { sapTlsDhcpInfoEntry 14 } sapTlsDhcpVendorOptionString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDhcpVendorOptionString specifies the string that goes into the Nokia vendor specific sub-option of option 82. This string is only used when sapTlsDhcpInfoAction is set to 'replace'." DEFVAL { "" } ::= { sapTlsDhcpInfoEntry 15 } sapTlsDhcpRemoteIdHex OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpRemoteIdHex specifies a binary remote-id; a non-empty value is only supported while the value of sapTlsDhcpRemoteId is equal to 'remoteIdHex'." DEFVAL { ''H } ::= { sapTlsDhcpInfoEntry 16 } sapTlsDhcpCircuitIdHex OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcpCircuitIdHex specifies a binary circuit-id; a non-empty value is only supported while the value of sapTlsDhcpCircuitId is equal to 'circuitIdHex'." DEFVAL { ''H } ::= { sapTlsDhcpInfoEntry 17 } sapTlsDhcpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsDhcpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sapTlsDhcpStatsTable contains DHCP statistics related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system." ::= { tmnxSapObjs 15 } sapTlsDhcpStatsEntry OBJECT-TYPE SYNTAX SapTlsDhcpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " DHCP statistics for a TLS SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTlsDhcpStatsTable 1 } SapTlsDhcpStatsEntry ::= SEQUENCE { sapTlsDhcpStatsClntSnoopdPckts Counter32, sapTlsDhcpStatsSrvrSnoopdPckts Counter32, sapTlsDhcpStatsClntForwdPckts Counter32, sapTlsDhcpStatsSrvrForwdPckts Counter32, sapTlsDhcpStatsClntDropdPckts Counter32, sapTlsDhcpStatsSrvrDropdPckts Counter32, sapTlsDhcpStatsClntProxRadPckts Counter32, sapTlsDhcpStatsClntProxLSPckts Counter32, sapTlsDhcpStatsGenReleasePckts Counter32, sapTlsDhcpStatsGenForceRenPckts Counter32, sapTlsDhcpStatsClntProxUDBPckts Counter32, sapTlsDhcpStatsClntProxNqPckts Counter32 } sapTlsDhcpStatsClntSnoopdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsClntSnoopdPckts indicates the number of DHCP client packets that have been snooped on this SAP." ::= { sapTlsDhcpStatsEntry 1 } sapTlsDhcpStatsSrvrSnoopdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsSrvrSnoopdPckts indicates the number of DHCP server packets that have been snooped on this SAP." ::= { sapTlsDhcpStatsEntry 2 } sapTlsDhcpStatsClntForwdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsClntForwdPckts indicates the number of DHCP client packets that have been forwarded on this SAP." ::= { sapTlsDhcpStatsEntry 3 } sapTlsDhcpStatsSrvrForwdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsSrvrForwdPckts indicates the number of DHCP server packets that have been forwarded on this SAP." ::= { sapTlsDhcpStatsEntry 4 } sapTlsDhcpStatsClntDropdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsClntDropdPckts indicates the number of DHCP client packets that have been dropped on this SAP." ::= { sapTlsDhcpStatsEntry 5 } sapTlsDhcpStatsSrvrDropdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsSrvrDropdPckts indicates the number of DHCP server packets that have been dropped on this SAP." ::= { sapTlsDhcpStatsEntry 6 } sapTlsDhcpStatsClntProxRadPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsClntProxRadPckts indicates the number of DHCP client packets that have been proxied on this SAP based on data received from a RADIUS server." ::= { sapTlsDhcpStatsEntry 7 } sapTlsDhcpStatsClntProxLSPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsClntProxLSPckts indicates the number of DHCP client packets that have been proxied on this SAP based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality." ::= { sapTlsDhcpStatsEntry 8 } sapTlsDhcpStatsGenReleasePckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsGenReleasePckts indicates the number of DHCP RELEASE messages spoofed on this SAP to the DHCP server." ::= { sapTlsDhcpStatsEntry 9 } sapTlsDhcpStatsGenForceRenPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsGenForceRenPckts indicates the number of DHCP FORCERENEW messages spoofed on this SAP to the DHCP clients." ::= { sapTlsDhcpStatsEntry 10 } sapTlsDhcpStatsClntProxUDBPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsClntProxUDBPckts indicates the number of DHCP client packets that have been proxied on this SAP based on the local user database." ::= { sapTlsDhcpStatsEntry 11 } sapTlsDhcpStatsClntProxNqPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsDhcpStatsClntProxNqPckts indicates the number of DHCP client packets that have been proxied on this SAP based on data received from a Diameter NASREQ server." ::= { sapTlsDhcpStatsEntry 12 } sapTlsDhcpLeaseStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsDhcpLeaseStateEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "sapTlsDhcpLeaseStateTable contains DHCP lease state info for a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system. The content of this table is moved to the svcDhcpLeaseStateTable." ::= { tmnxSapObjs 16 } sapTlsDhcpLeaseStateEntry OBJECT-TYPE SYNTAX SapTlsDhcpLeaseStateEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "DHCP Lease State information on a TLS SAP." INDEX { svcId, sapPortId, sapEncapValue, sapTlsDhcpLseStateCiAddr, sapTlsDhcpLseStateChAddr } ::= { sapTlsDhcpLeaseStateTable 1 } SapTlsDhcpLeaseStateEntry ::= SEQUENCE { sapTlsDhcpLseStateCiAddr IpAddress, sapTlsDhcpLseStateChAddr MacAddress, sapTlsDhcpLseStateRemainLseTime Unsigned32, sapTlsDhcpLseStateOption82 OCTET STRING, sapTlsDhcpLseStatePersistKey Unsigned32 } sapTlsDhcpLseStateCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of the object sapTlsDhcpLseStateCiAddr indicates the IP address of the DHCP lease state." ::= { sapTlsDhcpLeaseStateEntry 1 } sapTlsDhcpLseStateChAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of the object sapTlsDhcpLseStateChAddr indicates the MAC address of the DHCP lease state." ::= { sapTlsDhcpLeaseStateEntry 2 } sapTlsDhcpLseStateRemainLseTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapTlsDhcpLseStateRemainLseTime indicates the remaining lease time of the Ip address of the DHCP lease state. This object was made obsolete in the 4.0 release." ::= { sapTlsDhcpLeaseStateEntry 3 } sapTlsDhcpLseStateOption82 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapTlsDhcpLseStateOption82 indicates the content of the Option82 for this DHCP lease state. This object was made obsolete in the 4.0 release." ::= { sapTlsDhcpLeaseStateEntry 4 } sapTlsDhcpLseStatePersistKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapTlsDhcpLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file. This object was made obsolete in the 4.0 release." ::= { sapTlsDhcpLeaseStateEntry 5 } sapPortIdIngQosSchedStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapPortIdIngQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdIngQosSchedStatsTable contains ingress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS." ::= { tmnxSapObjs 17 } sapPortIdIngQosSchedStatsEntry OBJECT-TYPE SYNTAX SapPortIdIngQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the ingress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapPortIdIngQosSchedName, sapPortIdIngPortId } ::= { sapPortIdIngQosSchedStatsTable 1 } SapPortIdIngQosSchedStatsEntry ::= SEQUENCE { sapPortIdIngQosSchedName TNamedItem, sapPortIdIngPortId TmnxPortID, sapPortIdIngQosSchedFwdPkts Counter64, sapPortIdIngQosSchedFwdOctets Counter64, sapPortIdIngQosSchedCustId TmnxCustId } sapPortIdIngQosSchedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapPortIdIngQosSchedName is used as an index of the ingress QoS scheduler of this SAP." ::= { sapPortIdIngQosSchedStatsEntry 1 } sapPortIdIngPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapPortIdIngPortId is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied." ::= { sapPortIdIngQosSchedStatsEntry 2 } sapPortIdIngQosSchedFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapPortIdIngQosSchedStatsEntry 3 } sapPortIdIngQosSchedFwdOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapPortIdIngQosSchedStatsEntry 4 } sapPortIdIngQosSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosSchedCustId indicates the Customer ID for the associated service." ::= { sapPortIdIngQosSchedStatsEntry 5 } sapPortIdEgrQosSchedStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapPortIdEgrQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdEgrQosSchedStatsTable contains egress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS." ::= { tmnxSapObjs 18 } sapPortIdEgrQosSchedStatsEntry OBJECT-TYPE SYNTAX SapPortIdEgrQosSchedStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the egress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapPortIdEgrQosSchedName, sapPortIdEgrPortId } ::= { sapPortIdEgrQosSchedStatsTable 1 } SapPortIdEgrQosSchedStatsEntry ::= SEQUENCE { sapPortIdEgrQosSchedName TNamedItem, sapPortIdEgrPortId TmnxPortID, sapPortIdEgrQosSchedFwdPkts Counter64, sapPortIdEgrQosSchedFwdOctets Counter64, sapPortIdEgrQosSchedCustId TmnxCustId } sapPortIdEgrQosSchedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapPortIdEgrQosSchedName is used as an index of the egress QoS scheduler of this SAP." ::= { sapPortIdEgrQosSchedStatsEntry 1 } sapPortIdEgrPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapPortIdEgrPortId is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied." ::= { sapPortIdEgrQosSchedStatsEntry 2 } sapPortIdEgrQosSchedFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip." ::= { sapPortIdEgrQosSchedStatsEntry 3 } sapPortIdEgrQosSchedFwdOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip." ::= { sapPortIdEgrQosSchedStatsEntry 4 } sapPortIdEgrQosSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosSchedCustId indicates the Customer ID for the associated service." ::= { sapPortIdEgrQosSchedStatsEntry 5 } sapIngQosQueueInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosQueueInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to override the base parameters of a queue, as defined in the associated SAP ingress QoS policy." ::= { tmnxSapObjs 19 } sapIngQosQueueInfoEntry OBJECT-TYPE SYNTAX SapIngQosQueueInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Override values for the specified SAP ingress QoS queue. These values override the corresponding ones specified in the associated SAP ingress QoS policy." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosQId } ::= { sapIngQosQueueInfoTable 1 } SapIngQosQueueInfoEntry ::= SEQUENCE { sapIngQosQId TIngressQueueId, sapIngQosQRowStatus RowStatus, sapIngQosQLastMgmtChange TimeStamp, sapIngQosQOverrideFlags TQosQueueAttribute, sapIngQosQCBS TBurstSize, sapIngQosQMBS TBurstSize, sapIngQosQHiPrioOnly TBurstPercentOrDefault, sapIngQosQCIRAdaptation TAdaptationRule, sapIngQosQPIRAdaptation TAdaptationRule, sapIngQosQAdminPIR TQosQueuePIRRate, sapIngQosQAdminCIR TQosQueueCIRRate, sapIngQosQMBSBytes TBurstSizeBytes, sapIngQosQWeight TWeight, sapIngQosQCIRWeight TWeight, sapIngQosQAdminPIRPercent Unsigned32, sapIngQosQAdminCIRPercent Unsigned32, sapIngQosQMonitorDepth TruthValue, sapIngQosQDrpTailLowReductnMbs TBurstPercentOrDefault, sapIngQosQAdminPIRHi TmnxQosRateHigh32, sapIngQosQAdminPIRLo TmnxQosRateLow32, sapIngQosQAdminCIRHi TmnxQosRateHigh32, sapIngQosQAdminCIRLo TmnxQosRateLow32, sapIngQosQMonitorQueueDepth TruthValue, sapIngQosQFastPolling TruthValue } sapIngQosQId OBJECT-TYPE SYNTAX TIngressQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapIngQosQId indicates the ID of the queue whose parameters are to be overridden." ::= { sapIngQosQueueInfoEntry 1 } sapIngQosQRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQRowStatus controls the creation and deletion of rows in this table." ::= { sapIngQosQueueInfoEntry 2 } sapIngQosQLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row." ::= { sapIngQosQueueInfoEntry 3 } sapIngQosQOverrideFlags OBJECT-TYPE SYNTAX TQosQueueAttribute MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy." ::= { sapIngQosQueueInfoEntry 4 } sapIngQosQCBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilobytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQCBS specifies the amount of reserved buffer space (in kilobytes) for this queue." DEFVAL { -1 } ::= { sapIngQosQueueInfoEntry 5 } sapIngQosQMBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilobytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosQMBS specifies the maximum amount of buffer space (in kilobytes) allowed for this queue." DEFVAL { -1 } ::= { sapIngQosQueueInfoEntry 6 } sapIngQosQHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault UNITS "percent" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with sapIngQosQDrpTailLowReductnMbs object." DEFVAL { -1 } ::= { sapIngQosQueueInfoEntry 7 } sapIngQosQCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset." DEFVAL { closest } ::= { sapIngQosQueueInfoEntry 8 } sapIngQosQPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset." DEFVAL { closest } ::= { sapIngQosQueueInfoEntry 9 } sapIngQosQAdminPIR OBJECT-TYPE SYNTAX TQosQueuePIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosQAdminPIR specifies the desired PIR value for this queue. This object is obsoleted in 15.0 release and has been replaced with sapIngQosQAdminPIRHi and sapIngQosQAdminPIRLo objects." DEFVAL { -1 } ::= { sapIngQosQueueInfoEntry 10 } sapIngQosQAdminCIR OBJECT-TYPE SYNTAX TQosQueueCIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosQAdminCIR specifies the desired CIR value for this queue. This object is obsoleted in 15.0 release and has been replaced with sapIngQosQAdminCIRHi and sapIngQosQAdminCIRLo objects." DEFVAL { -1 } ::= { sapIngQosQueueInfoEntry 11 } sapIngQosQMBSBytes OBJECT-TYPE SYNTAX TBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQMBSBytes specifies the maximum amount of buffer space (in bytes) allowed for this queue." DEFVAL { -1 } ::= { sapIngQosQueueInfoEntry 12 } sapIngQosQWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { sapIngQosQueueInfoEntry 13 } sapIngQosQCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQCIRWeight specifies the weight that should be assigned to this queue by the parent scheduler among all the entities feeding into the parent, when the traffic is conforming to the committed rate. A value of '0' specifies that the queue will not receive bandwidth for the 'within-cir' pass on its parent scheduler." DEFVAL { 1 } ::= { sapIngQosQueueInfoEntry 14 } sapIngQosQAdminPIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQAdminPIRPercent specifies the desired PIR value for this queue as a percentage." DEFVAL { 10000 } ::= { sapIngQosQueueInfoEntry 15 } sapIngQosQAdminCIRPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQAdminCIRPercent specifies the desired CIR value for this queue as a percentage." DEFVAL { 0 } ::= { sapIngQosQueueInfoEntry 16 } sapIngQosQMonitorDepth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosQMonitorDepth specifies whether to enable queue depth monitoring for this specified queue. This object is obsoleted in 21.2 Release. It is replaced by sapIngQosQMonitorQueueDepth." DEFVAL { false } ::= { sapIngQosQueueInfoEntry 17 } sapIngQosQDrpTailLowReductnMbs OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by sapIngQosQMBSBytes." DEFVAL { -1 } ::= { sapIngQosQueueInfoEntry 18 } sapIngQosQAdminPIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQAdminPIRHi specifies the upper 32 bits of the desired PIR value for this queue. This value should always be set along with sapIngQosQAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosQAdminPIRHi along with the value of sapIngQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 4294967295 } ::= { sapIngQosQueueInfoEntry 19 } sapIngQosQAdminPIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQAdminPIRLo specifies the lower 32 bits of the desired PIR value for this queue. This value should always be set along with sapIngQosQAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosQAdminPIRHi along with the value of sapIngQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 4294967295 } ::= { sapIngQosQueueInfoEntry 20 } sapIngQosQAdminCIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQAdminCIRHi specifies the upper 32 bits of the desired CIR value for this queue. This value should always be set along with sapIngQosQAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosQAdminCIRHi along with the value of sapIngQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 0 } ::= { sapIngQosQueueInfoEntry 21 } sapIngQosQAdminCIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQAdminCIRLo specifies the lower 32 bits of the desired CIR value for this queue. This value should always be set along with sapIngQosQAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosQAdminCIRHi along with the value of sapIngQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 0 } ::= { sapIngQosQueueInfoEntry 22 } sapIngQosQMonitorQueueDepth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQMonitorQueueDepth specifies whether to enable queue depth monitoring for this specified queue." DEFVAL { false } ::= { sapIngQosQueueInfoEntry 23 } sapIngQosQFastPolling OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosQFastPolling indicates that the depth monitoring should use the new Embedded Control Processor fast-polling." DEFVAL { false } ::= { sapIngQosQueueInfoEntry 24 } sapEgrQosQueueInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosQueueInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to override the base parameters of a queue, as defined in the associated SAP egress QoS policy." ::= { tmnxSapObjs 20 } sapEgrQosQueueInfoEntry OBJECT-TYPE SYNTAX SapEgrQosQueueInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Override values for the specified SAP egress QoS queue. These values override the corresponding ones specified in the associated SAP egress QoS policy." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosQId } ::= { sapEgrQosQueueInfoTable 1 } SapEgrQosQueueInfoEntry ::= SEQUENCE { sapEgrQosQId TEgressQueueId, sapEgrQosQRowStatus RowStatus, sapEgrQosQLastMgmtChange TimeStamp, sapEgrQosQOverrideFlags TQosQueueAttribute, sapEgrQosQCBS TBurstSize, sapEgrQosQMBS TBurstSize, sapEgrQosQHiPrioOnly TBurstPercentOrDefault, sapEgrQosQCIRAdaptation TAdaptationRule, sapEgrQosQPIRAdaptation TAdaptationRule, sapEgrQosQAdminPIR TQosQueuePIRRate, sapEgrQosQAdminCIR TQosQueueCIRRate, sapEgrQosQAvgOverhead Unsigned32, sapEgrQosQMBSBytes TBurstSizeBytes, sapEgrQosQWeight TWeight, sapEgrQosQCIRWeight TWeight, sapEgrQosQAdminPIRPercent Unsigned32, sapEgrQosQAdminCIRPercent Unsigned32, sapEgrQosQMonitorDepth TruthValue, sapEgrQosQDrpTailLowReductnMbs TBurstPercentOrDefault, sapEgrQosQAdminPIRHi TmnxQosRateHigh32, sapEgrQosQAdminPIRLo TmnxQosRateLow32, sapEgrQosQAdminCIRHi TmnxQosRateHigh32, sapEgrQosQAdminCIRLo TmnxQosRateLow32, sapEgrQosQHsWrrWeight Unsigned32, sapEgrQosQHsClassWeight Unsigned32, sapEgrQosQHsWredQSlopePlcy TNamedItemOrEmpty, sapEgrQosQBurstLimit TBurstLimit, sapEgrQosQMonitorQueueDepth TruthValue, sapEgrQosQFastPolling TruthValue, sapEgrQosQViolationThreshold Unsigned32 } sapEgrQosQId OBJECT-TYPE SYNTAX TEgressQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrQosQId indicates the ID of the queue whose parameters are to be overridden." ::= { sapEgrQosQueueInfoEntry 1 } sapEgrQosQRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQRowStatus controls the creation and deletion of rows in this table." ::= { sapEgrQosQueueInfoEntry 2 } sapEgrQosQLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row." ::= { sapEgrQosQueueInfoEntry 3 } sapEgrQosQOverrideFlags OBJECT-TYPE SYNTAX TQosQueueAttribute MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy. The sapEgrQosQMonitorQueueDepth, sapEgrQosQFastPolling and sapEgrQosQViolationThreshold objects are not set in sapEgrQosQOverrideFlags when overridden on this queue and can not be cleared using sapEgrQosQOverrideFlags flag." ::= { sapEgrQosQueueInfoEntry 4 } sapEgrQosQCBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilobytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQCBS specifies the amount of reserved buffer space (in kilobytes) for this queue." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 5 } sapEgrQosQMBS OBJECT-TYPE SYNTAX TBurstSize UNITS "kilobytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosQMBS specifies the maximum amount of buffer space (in kilobytes) allowed for this queue." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 6 } sapEgrQosQHiPrioOnly OBJECT-TYPE SYNTAX TBurstPercentOrDefault UNITS "percent" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with sapEgrQosQDrpTailLowReductnMbs object." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 7 } sapEgrQosQCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset." DEFVAL { closest } ::= { sapEgrQosQueueInfoEntry 8 } sapEgrQosQPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset." DEFVAL { closest } ::= { sapEgrQosQueueInfoEntry 9 } sapEgrQosQAdminPIR OBJECT-TYPE SYNTAX TQosQueuePIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosQAdminPIR specifies the desired PIR value for this queue. This object is obsoleted in 15.0 release and has been replaced with sapEgrQosQAdminPIRHi and sapEgrQosQAdminPIRLo objects." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 10 } sapEgrQosQAdminCIR OBJECT-TYPE SYNTAX TQosQueueCIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosQAdminCIR specifies the desired CIR value for this queue. This object is obsoleted in 15.0 release and has been replaced with sapEgrQosQAdminCIRHi and sapEgrQosQAdminCIRLo objects." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 11 } sapEgrQosQAvgOverhead OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQAvgOverhead specifies the encapsulation overhead, in centipercent, used to translate packet-based rate to frame-based rate and vice versa." DEFVAL { 0 } ::= { sapEgrQosQueueInfoEntry 12 } sapEgrQosQMBSBytes OBJECT-TYPE SYNTAX TBurstSizeBytes UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQMBSBytes specifies the maximum amount of buffer space (in bytes) allowed for this queue." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 13 } sapEgrQosQWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { sapEgrQosQueueInfoEntry 14 } sapEgrQosQCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQCIRWeight specifies the weight that should be assigned to this queue by the parent scheduler among all the entities feeding into the parent, when the traffic is conforming to the committed rate. A value of '0' specifies that the queue will not receive bandwidth for the 'within-cir' pass on its parent scheduler." DEFVAL { 1 } ::= { sapEgrQosQueueInfoEntry 15 } sapEgrQosQAdminPIRPercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQAdminPIRPercent specifies the desired PIR value for this queue as a percentage." DEFVAL { 10000 } ::= { sapEgrQosQueueInfoEntry 16 } sapEgrQosQAdminCIRPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQAdminCIRPercent specifies the desired CIR value for this queue as a percentage." DEFVAL { 0 } ::= { sapEgrQosQueueInfoEntry 17 } sapEgrQosQMonitorDepth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosQMonitorDepth specifies whether to enable queue depth monitoring for this specified queue. This object is obsoleted in 21.2 Release. It is replaced by sapEgrQosQMonitorQueueDepth." DEFVAL { false } ::= { sapEgrQosQueueInfoEntry 18 } sapEgrQosQDrpTailLowReductnMbs OBJECT-TYPE SYNTAX TBurstPercentOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by sapEgrQosQMBSBytes." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 19 } sapEgrQosQAdminPIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQAdminPIRHi specifies the upper 32 bits of the desired PIR value for this queue. This value should always be set along with sapEgrQosQAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosQAdminPIRHi along with the value of sapEgrQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 4294967295 } ::= { sapEgrQosQueueInfoEntry 20 } sapEgrQosQAdminPIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQAdminPIRLo specifies the lower 32 bits of the desired PIR value for this queue. This value should always be set along with sapEgrQosQAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosQAdminPIRHi along with the value of sapEgrQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 4294967295 } ::= { sapEgrQosQueueInfoEntry 21 } sapEgrQosQAdminCIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQAdminCIRHi specifies the upper 32 bits of the desired CIR value for this queue. This value should always be set along with sapEgrQosQAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosQAdminCIRHi along with the value of sapEgrQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 0 } ::= { sapEgrQosQueueInfoEntry 22 } sapEgrQosQAdminCIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQAdminCIRLo specifies the lower 32 bits of the desired CIR value for this queue. This value should always be set along with sapEgrQosQAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosQAdminCIRHi along with the value of sapEgrQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate." DEFVAL { 0 } ::= { sapEgrQosQueueInfoEntry 23 } sapEgrQosQHsWrrWeight OBJECT-TYPE SYNTAX Unsigned32 (1..127) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQHsWrrWeight specifies the Weighted Round Robin (WRR) weight which this queue should parent into the scheduler. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class." DEFVAL { 1 } ::= { sapEgrQosQueueInfoEntry 24 } sapEgrQosQHsClassWeight OBJECT-TYPE SYNTAX Unsigned32 (1 | 2 | 4 | 8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQHsClassWeight specifies the weight of the scheduling class." DEFVAL { 1 } ::= { sapEgrQosQueueInfoEntry 25 } sapEgrQosQHsWredQSlopePlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQHsWredQSlopePlcy specifies the name of the slope policy." DEFVAL { "" } ::= { sapEgrQosQueueInfoEntry 26 } sapEgrQosQBurstLimit OBJECT-TYPE SYNTAX TBurstLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQBurstLimit specifies the explicit shaping burst size of a queue." DEFVAL { -1 } ::= { sapEgrQosQueueInfoEntry 27 } sapEgrQosQMonitorQueueDepth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQMonitorQueueDepth specifies whether to enable queue depth monitoring for this specified queue. When overridden this object does not update sapEgrQosQOverrideFlags." DEFVAL { false } ::= { sapEgrQosQueueInfoEntry 28 } sapEgrQosQFastPolling OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQFastPolling indicates that the depth monitoring should use the new Embedded Control Processor fast-polling. When overridden this object does not update sapEgrQosQOverrideFlags." DEFVAL { false } ::= { sapEgrQosQueueInfoEntry 29 } sapEgrQosQViolationThreshold OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..9999) UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQViolationThreshold indicates percent of the depth of the queue above which a violation is registered. This is applicable to both the existing queue depth monitoring feature and the fast-polling feature. When overridden this object does not update sapEgrQosQOverrideFlags." DEFVAL { 0 } ::= { sapEgrQosQueueInfoEntry 30 } sapIngQosSchedInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosSchedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP ingress scheduler policy." ::= { tmnxSapObjs 21 } sapIngQosSchedInfoEntry OBJECT-TYPE SYNTAX SapIngQosSchedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Override values for the specified SAP ingress virtual scheduler. These values override the corresponding ones specified in the associated SAP ingress scheduler policy." INDEX { svcId, sapPortId, sapEncapValue, IMPLIED sapIngQosSName } ::= { sapIngQosSchedInfoTable 1 } SapIngQosSchedInfoEntry ::= SEQUENCE { sapIngQosSName TNamedItem, sapIngQosSRowStatus RowStatus, sapIngQosSLastMgmtChange TimeStamp, sapIngQosSOverrideFlags TVirtSchedAttribute, sapIngQosSPIR THPolVirtualSchePIRRate, sapIngQosSCIR THPolVirtualScheCIRRate, sapIngQosSSummedCIR TruthValue, sapIngQosSPIRHi TmnxQosRateHigh32, sapIngQosSPIRLo TmnxQosRateLow32, sapIngQosSCIRHi TmnxQosRateHigh32, sapIngQosSCIRLo TmnxQosRateLow32, sapIngQosSParentWeight TWeight, sapIngQosSParentCIRWeight TWeight } sapIngQosSName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden." ::= { sapIngQosSchedInfoEntry 1 } sapIngQosSRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSRowStatus controls the creation and deletion of rows in this table." ::= { sapIngQosSchedInfoEntry 2 } sapIngQosSLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row." ::= { sapIngQosSchedInfoEntry 3 } sapIngQosSOverrideFlags OBJECT-TYPE SYNTAX TVirtSchedAttribute MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy." ::= { sapIngQosSchedInfoEntry 4 } sapIngQosSPIR OBJECT-TYPE SYNTAX THPolVirtualSchePIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosSPIR specifies the desired PIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by sapIngQosSPIRHi and sapIngQosSPIRLo." DEFVAL { -1 } ::= { sapIngQosSchedInfoEntry 5 } sapIngQosSCIR OBJECT-TYPE SYNTAX THPolVirtualScheCIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosSCIR specifies the desired CIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by sapIngQosSCIRHi and sapIngQosSCIRLo." DEFVAL { -1 } ::= { sapIngQosSchedInfoEntry 6 } sapIngQosSSummedCIR OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapIngQosSCIR) loses its meaning." DEFVAL { true } ::= { sapIngQosSchedInfoEntry 7 } sapIngQosSPIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSPIRHi specifies upper 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with sapIngQosSPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosSPIRHi along with the value of sapIngQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapIngQosSchedInfoEntry 8 } sapIngQosSPIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSPIRLo specifies lower 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with sapIngQosSPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosSPIRHi along with the value of sapIngQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapIngQosSchedInfoEntry 9 } sapIngQosSCIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSCIRHi specifies upper 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with sapIngQosSCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosSCIRHi along with the value of sapIngQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapIngQosSchedInfoEntry 10 } sapIngQosSCIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSCIRLo specifies lower 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with sapIngQosSCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngQosSCIRHi along with the value of sapIngQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapIngQosSchedInfoEntry 11 } sapIngQosSParentWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSParentWeight specifies the weight that needs to be used by this virtual scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { sapIngQosSchedInfoEntry 12 } sapIngQosSParentCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQosSParentCIRWeight specifies the weight that needs to be used until the committed rate by this virtual scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { sapIngQosSchedInfoEntry 13 } sapEgrQosSchedInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosSchedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP egress scheduler policy." ::= { tmnxSapObjs 22 } sapEgrQosSchedInfoEntry OBJECT-TYPE SYNTAX SapEgrQosSchedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Override values for the specified SAP egress virtual scheduler. These values override the corresponding ones specified in the associated SAP egress scheduler policy." INDEX { svcId, sapPortId, sapEncapValue, IMPLIED sapEgrQosSName } ::= { sapEgrQosSchedInfoTable 1 } SapEgrQosSchedInfoEntry ::= SEQUENCE { sapEgrQosSName TNamedItem, sapEgrQosSRowStatus RowStatus, sapEgrQosSLastMgmtChange TimeStamp, sapEgrQosSOverrideFlags TVirtSchedAttribute, sapEgrQosSPIR THPolVirtualSchePIRRate, sapEgrQosSCIR THPolVirtualScheCIRRate, sapEgrQosSSummedCIR TruthValue, sapEgrQosSPIRHi TmnxQosRateHigh32, sapEgrQosSPIRLo TmnxQosRateLow32, sapEgrQosSCIRHi TmnxQosRateHigh32, sapEgrQosSCIRLo TmnxQosRateLow32, sapEgrQosSParentWeight TWeight, sapEgrQosSParentCIRWeight TWeight } sapEgrQosSName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden." ::= { sapEgrQosSchedInfoEntry 1 } sapEgrQosSRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSRowStatus controls the creation and deletion of rows in this table." ::= { sapEgrQosSchedInfoEntry 2 } sapEgrQosSLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row." ::= { sapEgrQosSchedInfoEntry 3 } sapEgrQosSOverrideFlags OBJECT-TYPE SYNTAX TVirtSchedAttribute MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's egress scheduler policy." ::= { sapEgrQosSchedInfoEntry 4 } sapEgrQosSPIR OBJECT-TYPE SYNTAX THPolVirtualSchePIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosSPIR specifies the desired PIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by sapEgrQosSPIRHi and sapEgrQosSPIRLo." DEFVAL { -1 } ::= { sapEgrQosSchedInfoEntry 5 } sapEgrQosSCIR OBJECT-TYPE SYNTAX THPolVirtualScheCIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosSCIR specifies the desired CIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by sapEgrQosSCIRHi and sapEgrQosSCIRLo." DEFVAL { -1 } ::= { sapEgrQosSchedInfoEntry 6 } sapEgrQosSSummedCIR OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapEgrQosSCIR) loses its meaning." DEFVAL { true } ::= { sapEgrQosSchedInfoEntry 7 } sapEgrQosSPIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSPIRHi specifies upper 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with sapEgrQosSPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosSPIRHi along with the value of sapEgrQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapEgrQosSchedInfoEntry 8 } sapEgrQosSPIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSPIRLo specifies lower 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with sapEgrQosSPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosSPIRHi along with the value of sapEgrQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapEgrQosSchedInfoEntry 9 } sapEgrQosSCIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSCIRHi specifies upper 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with sapEgrQosSCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosSCIRHi along with the value of sapEgrQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapEgrQosSchedInfoEntry 10 } sapEgrQosSCIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSCIRLo specifies lower 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with sapEgrQosSCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrQosSCIRHi along with the value of sapEgrQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this virtual scheduler indicates maximum rate." DEFVAL { 4294967295 } ::= { sapEgrQosSchedInfoEntry 11 } sapEgrQosSParentWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSParentWeight specifies the weight that needs to be used by this virtual scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { sapEgrQosSchedInfoEntry 12 } sapEgrQosSParentCIRWeight OBJECT-TYPE SYNTAX TWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosSParentCIRWeight specifies the weight that needs to be used until the committed rate by this virtual scheduler to which this queue would be feeding." DEFVAL { 1 } ::= { sapEgrQosSchedInfoEntry 13 } sapSubMgmtInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapSubMgmtInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP subscriber management information." ::= { tmnxSapObjs 23 } sapSubMgmtInfoEntry OBJECT-TYPE SYNTAX SapSubMgmtInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Subscriber management specific information about a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapSubMgmtInfoTable 1 } SapSubMgmtInfoEntry ::= SEQUENCE { sapSubMgmtAdminStatus TmnxEnabledDisabled, sapSubMgmtDefSubProfile ServObjName, sapSubMgmtDefSlaProfile ServObjName, sapSubMgmtSubIdentPolicy ServObjName, sapSubMgmtSubscriberLimit TmnxSapSubscriberLimit, sapSubMgmtProfiledTrafficOnly TruthValue, sapSubMgmtNonSubTrafficSubIdent TmnxSubIdentStringOrEmpty, sapSubMgmtNonSubTrafficSubProf ServObjName, sapSubMgmtNonSubTrafficSlaProf ServObjName, sapSubMgmtMacDaHashing TruthValue, sapSubMgmtDefSubIdent TmnxDefSubIdSource, sapSubMgmtDefSubIdentString TmnxSubIdentStringOrEmpty, sapSubMgmtDefAppProfile ServObjName, sapSubMgmtNonSubTrafficAppProf ServObjName, sapSubMgmtDefInterDestId TmnxDefInterDestIdSource, sapSubMgmtDefInterDestIdString DisplayString, sapSubMgmtDefFilterProfile TNamedItemOrEmpty } sapSubMgmtAdminStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtAdminStatus specifies whether enhanced subscriber management is enabled on this SAP." DEFVAL { disabled } ::= { sapSubMgmtInfoEntry 1 } sapSubMgmtDefSubProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtDefSubProfile specifies the default subscriber profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable. A value of 'default' is not allowed for this object." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 2 } sapSubMgmtDefSlaProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtDefSlaProfile specifies the default SLA profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 3 } sapSubMgmtSubIdentPolicy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtSubIdentPolicy specifies the subscriber identification policy applicable on this SAP. The corresponding policy is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 4 } sapSubMgmtSubscriberLimit OBJECT-TYPE SYNTAX TmnxSapSubscriberLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for this SAP. If the value is 0, there is no limit. Only if the value is 1, the 'single-sub-parameters' defined with objects sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubProf and sapSubMgmtNonSubTrafficSlaProf are meaningful." DEFVAL { 1 } ::= { sapSubMgmtInfoEntry 5 } sapSubMgmtProfiledTrafficOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtProfiledTrafficOnly specifies whether only profiled traffic is applicable for this SAP. If set to 'true', all SAP queues will be deleted. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1." DEFVAL { false } ::= { sapSubMgmtInfoEntry 6 } sapSubMgmtNonSubTrafficSubIdent OBJECT-TYPE SYNTAX TmnxSubIdentStringOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtNonSubTrafficSubIdent specifies the subscriber identification applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 7 } sapSubMgmtNonSubTrafficSubProf OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtNonSubTrafficSubProf specifies the subscriber profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 8 } sapSubMgmtNonSubTrafficSlaProf OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtNonSubTrafficSlaProf specifies the SLA profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 9 } sapSubMgmtMacDaHashing OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG SAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id. The value of this object is only meaningful if sapSubMgmtAdminStatus is set to 'enabled' and can only be configured for TLS services." DEFVAL { false } ::= { sapSubMgmtInfoEntry 10 } sapSubMgmtDefSubIdent OBJECT-TYPE SYNTAX TmnxDefSubIdSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtDefSubIdent specifies what is used as the default subscriber identification applicable on this SAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this objects is set to 'useSapId', the SAP-id is used as the default subscriber identification string. In this case, sapSubMgmtDefSubIdentString must contain the empty string. If the value of this objects is set to 'useAutoId', the auto-generated subscriber identification string, as defined in tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber identification string. In this case, sapSubMgmtDefSubIdentString must contain the empty string. If the value of this object is set to 'useString', the value of sapSubMgmtDefSubIdentString is used as the default subscriber identification string. In this case, an empty sapSubMgmtDefSubIdentString means that there is no default subscriber identification configured." DEFVAL { useString } ::= { sapSubMgmtInfoEntry 11 } sapSubMgmtDefSubIdentString OBJECT-TYPE SYNTAX TmnxSubIdentStringOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtDefSubIdentString specifies the default subscriber identification string applicable on this SAP." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 12 } sapSubMgmtDefAppProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtDefAppProfile specifies the default application profile applicable on this SAP. The corresponding profile is defined in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 13 } sapSubMgmtNonSubTrafficAppProf OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtNonSubTrafficAppProf specifies the application profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 14 } sapSubMgmtDefInterDestId OBJECT-TYPE SYNTAX TmnxDefInterDestIdSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtDefInterDestId specifies what is used as the default intermediate destination identifier applicable on this SAP. This value is used in case no other source (like Radius) provides an intermediate destination identifier. If the value of this object is set to 'useString', the value of sapSubMgmtDefInterDestIdString is used as the default intermediate destination identifier. In this case, an empty sapSubMgmtDefInterDestIdString means that there is no default intermediate destination identifier configured. If the value of this object is set to 'useTopQTag', the top q-tag of this SAP is used as the default intermediate destination identifier. In this case, sapSubMgmtDefInterDestIdString must contain the empty string. If the value of this object is set to 'useVpi', the ATM VPI of this SAP is used as the default intermediate destination identifier. In this case, sapSubMgmtDefInterDestIdString must contain the empty string." DEFVAL { useString } ::= { sapSubMgmtInfoEntry 15 } sapSubMgmtDefInterDestIdString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapSubMgmtDefInterDestIdString specifies the default intermediate destination identifier applicable on this SAP." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 16 } sapSubMgmtDefFilterProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapSubMgmtDefFilterProfile specifies the default filter profile for this SAP. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable." DEFVAL { "" } ::= { sapSubMgmtInfoEntry 17 } sapTlsMstiTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsMstiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Multiple Spanning Tree Instance information for the SAP. Each management VPLS running MSTP can have up to 15 MSTI. An entry in this table is automatically created when a tlsMstiEntry is created." ::= { tmnxSapObjs 24 } sapTlsMstiEntry OBJECT-TYPE SYNTAX SapTlsMstiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific MSTI for a SAP." INDEX { svcId, sapPortId, sapEncapValue, tlsMstiInstanceId } ::= { sapTlsMstiTable 1 } SapTlsMstiEntry ::= SEQUENCE { sapTlsMstiPriority Integer32, sapTlsMstiPathCost Integer32, sapTlsMstiLastMgmtChange TimeStamp, sapTlsMstiPortRole StpPortRole, sapTlsMstiPortState TStpPortState, sapTlsMstiDesignatedBridge BridgeId, sapTlsMstiDesignatedPort Integer32 } sapTlsMstiPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsMstiPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP and MSTI. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240." DEFVAL { 128 } ::= { sapTlsMstiEntry 1 } sapTlsMstiPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsMstiPathCost specifies the contribution of this port to the MSTI path cost of paths towards the spanning tree regional root which include this port." DEFVAL { 10 } ::= { sapTlsMstiEntry 2 } sapTlsMstiLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMstiLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this SAP MSTI information." ::= { sapTlsMstiEntry 3 } sapTlsMstiPortRole OBJECT-TYPE SYNTAX StpPortRole MAX-ACCESS read-only STATUS current DESCRIPTION "sapTlsMstiPortRole indicates the current role of the sap in the MSTI as defined by the Spanning Tree Protocol." ::= { sapTlsMstiEntry 4 } sapTlsMstiPortState OBJECT-TYPE SYNTAX TStpPortState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMstiPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state." ::= { sapTlsMstiEntry 5 } sapTlsMstiDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMstiDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment for this MSTI." ::= { sapTlsMstiEntry 6 } sapTlsMstiDesignatedPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMstiDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment for this MSTI." ::= { sapTlsMstiEntry 7 } sapIpipeInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIpipeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains IPIPE specific SAP information." ::= { tmnxSapObjs 25 } sapIpipeInfoEntry OBJECT-TYPE SYNTAX SapIpipeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPIPE specific information about a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapIpipeInfoTable 1 } SapIpipeInfoEntry ::= SEQUENCE { sapIpipeCeInetAddressType InetAddressType, sapIpipeCeInetAddress InetAddress, sapIpipeMacRefreshInterval Unsigned32, sapIpipeMacAddress MacAddress, sapIpipeArpedMacAddress MacAddress, sapIpipeArpedMacAddressTimeout Unsigned32, sapIpipeDiscoveredCeInetAddrType InetAddressType, sapIpipeDiscoveredCeInetAddr InetAddress, sapIpipeUseBroadcastMac TruthValue, sapIpipeUsingBroadcastMac TruthValue, sapIpipeIpv6LinkLocalCeInetAddr InetAddress, sapIpipeIpv6GlobalCeInetAddr InetAddress, sapIpipeIpv6DiscoveredMacAddress MacAddress, sapIpipeLegacyFaultNotification TruthValue, sapIpipeRemainRecoveryTimer Unsigned32 } sapIpipeCeInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapIpipeCeInetAddressType specifies the addresstype of the local end host IP of an IPIPE. This object is only configurable if the value of 'svcIpipeCeAddressDiscovery' is 'disabled." ::= { sapIpipeInfoEntry 1 } sapIpipeCeInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The type of this address is determined by the value of the sapIpipeCeInetAddressType object. This object specifies the IPv4 address of the local end host of an IPIPE. This object is only configurable if the value of 'svcIpipeCeAddressDiscovery' is 'disabled." ::= { sapIpipeInfoEntry 2 } sapIpipeMacRefreshInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapIpipeMacRefreshInterval specifies the interval between successive attempts to refresh the MAC address of the CE device associated with an Ethernet ipipe SAP. If no other event (such as reception of an ARP request from the CE) occurs that would refresh the MAC address before the end of the interval, an ARP request will be originated from the IPIPE SAP." DEFVAL { 14400 } ::= { sapIpipeInfoEntry 3 } sapIpipeMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapIpipeMacAddress specifies the MAC address of an IPIPE Ethernet SAP." DEFVAL { '000000000000'H } ::= { sapIpipeInfoEntry 4 } sapIpipeArpedMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpipeArpedMacAddress indicates the MAC address of the local end host." ::= { sapIpipeInfoEntry 5 } sapIpipeArpedMacAddressTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpipeArpedMacAddressTimeout indicates the number of seconds to wait for the sapIpipeArpedMacAddress to be re-refreshed." ::= { sapIpipeInfoEntry 6 } sapIpipeDiscoveredCeInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpipeDiscoveredCeInetAddrType indicates the addresstype of the local end discovered host IP of an IPIPE SAP." ::= { sapIpipeInfoEntry 7 } sapIpipeDiscoveredCeInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this address is determined by the value of the sapIpipeDiscoveredCeInetAddrType object. This object indicates the IPv4 address of the discovered local end host of an IPIPE SAP." ::= { sapIpipeInfoEntry 8 } sapIpipeUseBroadcastMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapIpipeUseBroadcastMac specifies whether to use a broadcast MAC address to forward traffic from the Ethernet Ipipe SAP when sapIpipeArpedMacAddress is not a valid MAC address (no ARPed MAC address). If svcIpipeCeAddressDiscovery is set to 'disabled (2)', this value cannot be changed from the default value. For non-Ethernet SAPs this value cannot be changed from the default value." DEFVAL { false } ::= { sapIpipeInfoEntry 9 } sapIpipeUsingBroadcastMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIpipeUsingBroadcastMac indicates whether a broadcast MAC address is currently being used to forward traffic from the Ethernet Ipipe SAP." ::= { sapIpipeInfoEntry 10 } sapIpipeIpv6LinkLocalCeInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the discovered link local IPv6 address of the local end host of an IPIPE SAP." ::= { sapIpipeInfoEntry 11 } sapIpipeIpv6GlobalCeInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the discovered global IPv6 address of the local end host of an IPIPE SAP." ::= { sapIpipeInfoEntry 12 } sapIpipeIpv6DiscoveredMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpipeIpv6DiscoveredMacAddress indicates the MAC address of the IPv6 local end host." ::= { sapIpipeInfoEntry 13 } sapIpipeLegacyFaultNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIpipeLegacyFaultNotification indicates whether SAP will propagate fault towards the legacy side." ::= { sapIpipeInfoEntry 14 } sapIpipeRemainRecoveryTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "deciseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIpipeRemainRecoveryTimer indicates remaining value for the recovery timer. A value of zero indicates that the timer is not ongoing." ::= { sapIpipeInfoEntry 15 } sapTodMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTodMonitorEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This table contains information on configurable objects on SAP level, that can be modified by a scheduled policy. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 26 } sapTodMonitorEntry OBJECT-TYPE SYNTAX SapTodMonitorEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information about ToD policy modifiable config data for a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTodMonitorTable 1 } SapTodMonitorEntry ::= SEQUENCE { sapCurrentIngressIpFilterId TFilterID, sapCurrentIngressIpv6FilterId TFilterID, sapCurrentIngressMacFilterId TFilterID, sapCurrentIngressQosPolicyId TSapIngressPolicyID, sapCurrentIngressQosSchedPlcy ServObjName, sapCurrentEgressIpFilterId TFilterID, sapCurrentEgressIpv6FilterId TFilterID, sapCurrentEgressMacFilterId TFilterID, sapCurrentEgressQosPolicyId TSapEgressPolicyID, sapCurrentEgressQosSchedPlcy ServObjName, sapIntendedIngressIpFilterId TFilterID, sapIntendedIngressIpv6FilterId TFilterID, sapIntendedIngressMacFilterId TFilterID, sapIntendedIngressQosPolicyId TSapIngressPolicyID, sapIntendedIngressQosSchedPlcy ServObjName, sapIntendedEgressIpFilterId TFilterID, sapIntendedEgressIpv6FilterId TFilterID, sapIntendedEgressMacFilterId TFilterID, sapIntendedEgressQosPolicyId TSapEgressPolicyID, sapIntendedEgressQosSchedPlcy ServObjName } sapCurrentIngressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpFilterId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 1 } sapCurrentIngressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpv6FilterId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 2 } sapCurrentIngressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressMacFilterId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 3 } sapCurrentIngressQosPolicyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressQosPolicyId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 4 } sapCurrentIngressQosSchedPlcy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentIngressQosSchedPlcy indicates the ingress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapIngressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-service this SAP belongs to. " ::= { sapTodMonitorEntry 5 } sapCurrentEgressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpFilterId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 6 } sapCurrentEgressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpv6FilterId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 7 } sapCurrentEgressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressMacFilterId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 8 } sapCurrentEgressQosPolicyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressQosPolicyId in case it is overruled by a ToD Suite policy." ::= { sapTodMonitorEntry 9 } sapCurrentEgressQosSchedPlcy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapCurrentEgressQosSchedPlcy indicates the Egress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapEgressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-customer this SAP belongs to." ::= { sapTodMonitorEntry 10 } sapIntendedIngressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress IP filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 11 } sapIntendedIngressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 12 } sapIntendedIngressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter that should be applied on this SAP. If it deviates from sapCurrentIngressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 13 } sapIntendedIngressQosPolicyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos policy that should be applied on this SAP. If it deviates from sapCurrentIngressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 14 } sapIntendedIngressQosSchedPlcy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedIngressQosSchedPlcy indicates the ingress QoS scheduler that should be applied on this SAP. If it deviates from sapCurrentIngressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 15 } sapIntendedEgressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress IP filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 16 } sapIntendedEgressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress IPv6 filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 17 } sapIntendedEgressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress mac filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 18 } sapIntendedEgressQosPolicyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 19 } sapIntendedEgressQosSchedPlcy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIntendedEgressQosSchedPlcy indicates the index in the tSapEgressTable corresponding to the Egress Qos Scheduler policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal." ::= { sapTodMonitorEntry 20 } sapIngrQosPlcyStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngrQosPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains Ingress Qos policy related statistics for a SAP. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 27 } sapIngrQosPlcyStatsEntry OBJECT-TYPE SYNTAX SapIngrQosPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Statistics about a specific Ingress Qos Policy applied on a specific SAP." INDEX { svcId, sapPortId, sapEncapValue, sapIgQosPlcyId } ::= { sapIngrQosPlcyStatsTable 1 } SapIngrQosPlcyStatsEntry ::= SEQUENCE { sapIgQosPlcyId TSapIngressPolicyID, sapIgQosPlcyDroppedHiPrioPackets Counter64, sapIgQosPlcyDroppedHiPrioOctets Counter64, sapIgQosPlcyDroppedLoPrioPackets Counter64, sapIgQosPlcyDroppedLoPrioOctets Counter64, sapIgQosPlcyForwardedInProfPackets Counter64, sapIgQosPlcyForwardedInProfOctets Counter64, sapIgQosPlcyForwardedOutProfPackets Counter64, sapIgQosPlcyForwardedOutProfOctets Counter64 } sapIgQosPlcyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified." ::= { sapIngrQosPlcyStatsEntry 1 } sapIgQosPlcyDroppedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngrQosPlcyStatsEntry 2 } sapIgQosPlcyDroppedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyDroppedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngrQosPlcyStatsEntry 3 } sapIgQosPlcyDroppedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngrQosPlcyStatsEntry 4 } sapIgQosPlcyDroppedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngrQosPlcyStatsEntry 5 } sapIgQosPlcyForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngrQosPlcyStatsEntry 6 } sapIgQosPlcyForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngrQosPlcyStatsEntry 7 } sapIgQosPlcyForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngrQosPlcyStatsEntry 8 } sapIgQosPlcyForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngrQosPlcyStatsEntry 9 } sapEgrQosPlcyStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains Egress Qos policy related statistics for a SAP. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 28 } sapEgrQosPlcyStatsEntry OBJECT-TYPE SYNTAX SapEgrQosPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Statistics about a specific Egress Qos Policy applied on a specific SAP." INDEX { svcId, sapPortId, sapEncapValue, sapEgQosPlcyId } ::= { sapEgrQosPlcyStatsTable 1 } SapEgrQosPlcyStatsEntry ::= SEQUENCE { sapEgQosPlcyId TSapEgressPolicyID, sapEgQosPlcyDroppedInProfPackets Counter64, sapEgQosPlcyDroppedInProfOctets Counter64, sapEgQosPlcyDroppedOutProfPackets Counter64, sapEgQosPlcyDroppedOutProfOctets Counter64, sapEgQosPlcyForwardedInProfPackets Counter64, sapEgQosPlcyForwardedInProfOctets Counter64, sapEgQosPlcyForwardedOutProfPackets Counter64, sapEgQosPlcyForwardedOutProfOctets Counter64 } sapEgQosPlcyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyId indicates the row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified." ::= { sapEgrQosPlcyStatsEntry 1 } sapEgQosPlcyDroppedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyDroppedInProfPackets indicates the number of in-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyStatsEntry 2 } sapEgQosPlcyDroppedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyDroppedInProfOctets indicates the number of in-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyStatsEntry 3 } sapEgQosPlcyDroppedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyDroppedOutProfPackets indicates the number of out-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyStatsEntry 4 } sapEgQosPlcyDroppedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyDroppedOutProfOctets indicates the number of out-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyStatsEntry 5 } sapEgQosPlcyForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyStatsEntry 6 } sapEgQosPlcyForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyStatsEntry 7 } sapEgQosPlcyForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyStatsEntry 8 } sapEgQosPlcyForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyStatsEntry 9 } sapIngQosPlcyQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosPlcyQueueStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains ingress QoS queue SAP statistics, per Ingress QoS Policy the queue was used by. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 29 } sapIngQosPlcyQueueStatsEntry OBJECT-TYPE SYNTAX SapIngQosPlcyQueueStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Ingress statistics about a specific SAP's QoS queue for a given Qos policy." INDEX { svcId, sapPortId, sapEncapValue, sapIgQosPlcyQueuePlcyId, sapIgQosPlcyQueueId } ::= { sapIngQosPlcyQueueStatsTable 1 } SapIngQosPlcyQueueStatsEntry ::= SEQUENCE { sapIgQosPlcyQueuePlcyId TSapIngressPolicyID, sapIgQosPlcyQueueId TSapIngQueueId, sapIgQosPlcyQueueStatsOfferedHiPrioPackets Counter64, sapIgQosPlcyQueueStatsDroppedHiPrioPackets Counter64, sapIgQosPlcyQueueStatsOfferedLoPrioPackets Counter64, sapIgQosPlcyQueueStatsDroppedLoPrioPackets Counter64, sapIgQosPlcyQueueStatsOfferedHiPrioOctets Counter64, sapIgQosPlcyQueueStatsDroppedHiPrioOctets Counter64, sapIgQosPlcyQueueStatsOfferedLoPrioOctets Counter64, sapIgQosPlcyQueueStatsDroppedLoPrioOctets Counter64, sapIgQosPlcyQueueStatsForwardedInProfPackets Counter64, sapIgQosPlcyQueueStatsForwardedOutProfPackets Counter64, sapIgQosPlcyQueueStatsForwardedInProfOctets Counter64, sapIgQosPlcyQueueStatsForwardedOutProfOctets Counter64, sapIgQosPlcyQueueCustId TmnxCustId, sapIgQosPlcyQueueStatsUncoloredPacketsOffered Counter64, sapIgQosPlcyQueueStatsUncoloredOctetsOffered Counter64 } sapIgQosPlcyQueuePlcyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyQueuePlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy." ::= { sapIngQosPlcyQueueStatsEntry 1 } sapIgQosPlcyQueueId OBJECT-TYPE SYNTAX TSapIngQueueId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The index of the ingress QoS queue of this SAP used by the policy indicated by sapIgQosPlcyQueuePlcyId." ::= { sapIngQosPlcyQueueStatsEntry 2 } sapIgQosPlcyQueueStatsOfferedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyQueueStatsEntry 3 } sapIgQosPlcyQueueStatsDroppedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyQueueStatsEntry 4 } sapIgQosPlcyQueueStatsOfferedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyQueueStatsEntry 5 } sapIgQosPlcyQueueStatsDroppedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyQueueStatsEntry 6 } sapIgQosPlcyQueueStatsOfferedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyQueueStatsEntry 7 } sapIgQosPlcyQueueStatsDroppedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyQueueStatsEntry 8 } sapIgQosPlcyQueueStatsOfferedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyQueueStatsEntry 9 } sapIgQosPlcyQueueStatsDroppedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyQueueStatsEntry 10 } sapIgQosPlcyQueueStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngQosPlcyQueueStatsEntry 11 } sapIgQosPlcyQueueStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngQosPlcyQueueStatsEntry 12 } sapIgQosPlcyQueueStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngQosPlcyQueueStatsEntry 13 } sapIgQosPlcyQueueStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngQosPlcyQueueStatsEntry 14 } sapIgQosPlcyQueueCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyQueueCustId indicates the Customer ID for the associated service." ::= { sapIngQosPlcyQueueStatsEntry 15 } sapIgQosPlcyQueueStatsUncoloredPacketsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered indicates the number of uncolored packets offered to the ingress Qchip." ::= { sapIngQosPlcyQueueStatsEntry 16 } sapIgQosPlcyQueueStatsUncoloredOctetsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered indicates the number of uncolored octets offered to the ingress Qchip." ::= { sapIngQosPlcyQueueStatsEntry 17 } sapEgrQosPlcyQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosPlcyQueueStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains egress QoS queue SAP statistics per Egress QoS Policy the queue was used by. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 30 } sapEgrQosPlcyQueueStatsEntry OBJECT-TYPE SYNTAX SapEgrQosPlcyQueueStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Egress statistics about a specific SAP's QoS queue for a given Qos policy." INDEX { svcId, sapPortId, sapEncapValue, sapEgQosPlcyQueuePlcyId, sapEgQosPlcyQueueId } ::= { sapEgrQosPlcyQueueStatsTable 1 } SapEgrQosPlcyQueueStatsEntry ::= SEQUENCE { sapEgQosPlcyQueuePlcyId TSapEgressPolicyID, sapEgQosPlcyQueueId TSapEgrQueueId, sapEgQosPlcyQueueStatsForwardedInProfPackets Counter64, sapEgQosPlcyQueueStatsDroppedInProfPackets Counter64, sapEgQosPlcyQueueStatsForwardedOutProfPackets Counter64, sapEgQosPlcyQueueStatsDroppedOutProfPackets Counter64, sapEgQosPlcyQueueStatsForwardedInProfOctets Counter64, sapEgQosPlcyQueueStatsDroppedInProfOctets Counter64, sapEgQosPlcyQueueStatsForwardedOutProfOctets Counter64, sapEgQosPlcyQueueStatsDroppedOutProfOctets Counter64, sapEgQosPlcyQueueCustId TmnxCustId } sapEgQosPlcyQueuePlcyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The row index in the tSapEgressTable corresponding to this egress QoS policy." ::= { sapEgrQosPlcyQueueStatsEntry 1 } sapEgQosPlcyQueueId OBJECT-TYPE SYNTAX TSapEgrQueueId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueId indicates index of the egress QoS queue of this SAP." ::= { sapEgrQosPlcyQueueStatsEntry 2 } sapEgQosPlcyQueueStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyQueueStatsEntry 3 } sapEgQosPlcyQueueStatsDroppedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedInProfPackets indicates the number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyQueueStatsEntry 4 } sapEgQosPlcyQueueStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyQueueStatsEntry 5 } sapEgQosPlcyQueueStatsDroppedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedOutProfPackets indicates the number out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyQueueStatsEntry 6 } sapEgQosPlcyQueueStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyQueueStatsEntry 7 } sapEgQosPlcyQueueStatsDroppedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedInProfOctets indicates the number in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyQueueStatsEntry 8 } sapEgQosPlcyQueueStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyQueueStatsEntry 9 } sapEgQosPlcyQueueStatsDroppedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedOutProfOctets indicates the number out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyQueueStatsEntry 10 } sapEgQosPlcyQueueCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyQueueCustId indicates the Customer ID for the associated service." ::= { sapEgrQosPlcyQueueStatsEntry 11 } sapDhcpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapDhcpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sapDhcpInfoTable contains DHCP information related to a routed CO subscriber SAP. This table complements sapBaseInfoTable, and contains an entry for each routed CO subscriber SAP. Rows in this table are created and deleted automatically by the system." ::= { tmnxSapObjs 31 } sapDhcpInfoEntry OBJECT-TYPE SYNTAX SapDhcpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP specific information for a routed CO subscriber SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapDhcpInfoTable 1 } SapDhcpInfoEntry ::= SEQUENCE { sapDhcpOperLeasePopulate Unsigned32 } sapDhcpOperLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP." ::= { sapDhcpInfoEntry 1 } sapIngSchedPlcyStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngSchedPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains ingress QoS queue statistics for the SAPs, organized by scheduler policy. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 32 } sapIngSchedPlcyStatsEntry OBJECT-TYPE SYNTAX SapIngSchedPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Statistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies." INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName, IMPLIED sapIngQosSchedName } ::= { sapIngSchedPlcyStatsTable 1 } SapIngSchedPlcyStatsEntry ::= SEQUENCE { sapIngSchedPlcyStatsFwdPkt Counter64, sapIngSchedPlcyStatsFwdOct Counter64 } sapIngSchedPlcyStatsFwdPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapIngSchedPlcyStatsEntry 1 } sapIngSchedPlcyStatsFwdOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapIngSchedPlcyStatsEntry 2 } sapEgrSchedPlcyStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrSchedPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains egress QoS scheduler statistics for the SAPs, organized by scheduler policy. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 33 } sapEgrSchedPlcyStatsEntry OBJECT-TYPE SYNTAX SapEgrSchedPlcyStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Statistics about a specific SAP's egress QoS scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies." INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName, IMPLIED sapEgrQosSchedName } ::= { sapEgrSchedPlcyStatsTable 1 } SapEgrSchedPlcyStatsEntry ::= SEQUENCE { sapEgrSchedPlcyStatsFwdPkt Counter64, sapEgrSchedPlcyStatsFwdOct Counter64 } sapEgrSchedPlcyStatsFwdPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of packets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy." ::= { sapEgrSchedPlcyStatsEntry 1 } sapEgrSchedPlcyStatsFwdOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of octets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy." ::= { sapEgrSchedPlcyStatsEntry 2 } sapIngSchedPlcyPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngSchedPlcyPortStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The sapIngSchedPlcyPortStatsTable contains ingress QoS scheduler statistics for the SAPs, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 34 } sapIngSchedPlcyPortStatsEntry OBJECT-TYPE SYNTAX SapIngSchedPlcyPortStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Statistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies." INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName, tVirtualSchedulerName, sapPortIdIngPortId } ::= { sapIngSchedPlcyPortStatsTable 1 } SapIngSchedPlcyPortStatsEntry ::= SEQUENCE { sapIngSchedPlcyPortStatsPort TmnxPortID, sapIngSchedPlcyPortStatsFwdPkt Counter64, sapIngSchedPlcyPortStatsFwdOct Counter64 } sapIngSchedPlcyPortStatsPort OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of sapIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied." ::= { sapIngSchedPlcyPortStatsEntry 1 } sapIngSchedPlcyPortStatsFwdPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapIngSchedPlcyPortStatsEntry 2 } sapIngSchedPlcyPortStatsFwdOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip." ::= { sapIngSchedPlcyPortStatsEntry 3 } sapEgrSchedPlcyPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrSchedPlcyPortStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The sapEgrSchedPlcyPortStatsTable contains egress QoS scheduler statistics for the SAPs, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 35 } sapEgrSchedPlcyPortStatsEntry OBJECT-TYPE SYNTAX SapEgrSchedPlcyPortStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Statistics about a specific SAP's egress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies." INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName, tVirtualSchedulerName, sapPortIdEgrPortId } ::= { sapEgrSchedPlcyPortStatsTable 1 } SapEgrSchedPlcyPortStatsEntry ::= SEQUENCE { sapEgrSchedPlcyPortStatsPort TmnxPortID, sapEgrSchedPlcyPortStatsFwdPkt Counter64, sapEgrSchedPlcyPortStatsFwdOct Counter64 } sapEgrSchedPlcyPortStatsPort OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of sapEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied." ::= { sapEgrSchedPlcyPortStatsEntry 1 } sapEgrSchedPlcyPortStatsFwdPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip." ::= { sapEgrSchedPlcyPortStatsEntry 2 } sapEgrSchedPlcyPortStatsFwdOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip." ::= { sapEgrSchedPlcyPortStatsEntry 3 } sapCemInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapCemInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains CEM SAP information." ::= { tmnxSapObjs 40 } sapCemInfoEntry OBJECT-TYPE SYNTAX SapCemInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific CEM SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapCemInfoTable 1 } SapCemInfoEntry ::= SEQUENCE { sapCemLastMgmtChange TimeStamp, sapCemEndpointType INTEGER, sapCemBitrate Unsigned32, sapCemCasTrunkFraming TdmOptionsCasTrunkFraming, sapCemPayloadSize Unsigned32, sapCemJitterBuffer Unsigned32, sapCemUseRtpHeader TruthValue, sapCemDifferential TruthValue, sapCemTimestampFreq Unsigned32, sapCemReportAlarm CemSapReportAlarm, sapCemReportAlarmStatus CemSapReportAlarm, sapCemLocalEcid CemSapEcid, sapCemRemoteMacAddr MacAddress, sapCemRemoteEcid CemSapEcid, sapCemJitterBufPackets Unsigned32, sapCemPlayoutBufPacketsThreshold Unsigned32 } sapCemLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapCemLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this CEM SAP information." ::= { sapCemInfoEntry 1 } sapCemEndpointType OBJECT-TYPE SYNTAX INTEGER { unstructuredE1 (1), unstructuredT1 (2), unstructuredE3 (3), unstructuredT3 (4), nxDS0 (5), nxDS0WithCas (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the CEM SAP endpoint type." ::= { sapCemInfoEntry 2 } sapCemBitrate OBJECT-TYPE SYNTAX Unsigned32 (0..699) UNITS "sixty-four kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the bit-rate in multiples of 64 Kbit/s of the CEM SAP." ::= { sapCemInfoEntry 3 } sapCemCasTrunkFraming OBJECT-TYPE SYNTAX TdmOptionsCasTrunkFraming MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the CAS trunk framing mode of the CEM SAP." ::= { sapCemInfoEntry 4 } sapCemPayloadSize OBJECT-TYPE SYNTAX Unsigned32 (0 | 16..2048) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the payload size (in bytes) of packets transmitted to the Packet Service Network (PSN) by the CEM SAP. This determines the size of the data that will be transmitted over the service. As well, if the size of the data received is not consistent with the payload size then the packet is considered malformed. The default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 64 bytes | | +-----------+----------------------- | | N = 2..4 | N x 32 bytes | | +-----------+----------------------- | | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | N x 24 bytes | --------------------------------------------------------- For 'nxDS0WithCas', the sapCemPayloadSize cannot be changed away from the default value. For '1xDS0', sapCemPayloadSize must be a multiple of 2. For 'NxDS0', where N > 1, sapCemPayloadSize must be a multiple of the number of timeslots (sapCemBitrate). For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3' and 'unstructuredT3', sapCemPayloadSize must be a multiple of 32 bytes. Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffers is not allowed. For all endpoint types except for 'nxDS0WithCas', the minimum payload size is given below: --------------------------------------------------------- | Endpoint Type | Timeslots | Minimum payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1) | N = 1..4 | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (T1) | N = 1..4 | N x 24 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- For all endpoints types except for 'nxDS0WithCas', the maximum payload size is 2048 bytes. Setting this object to 0 sets it back to the default value." ::= { sapCemInfoEntry 5 } sapCemJitterBuffer OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..250) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the jitter buffer size in milliseconds (ms). Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default jitter buf. | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 32 ms | | +-----------+----------------------- | | N = 2..4 | 16 ms | | +-----------+----------------------- | | N = 5..15 | 8 ms | | +-----------+----------------------- | | N >= 16 | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | 8 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | 12 ms | --------------------------------------------------------- Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffers is not allowed. The valid range is 1 to 250 ms. Setting this object to 0 sets it back to the default value." ::= { sapCemInfoEntry 6 } sapCemUseRtpHeader OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether a RTP header is used when packets are transmitted to the Packet Service Network (PSN) by the CEM SAP." DEFVAL { false } ::= { sapCemInfoEntry 7 } sapCemDifferential OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether this CEM SAP is in differential mode." ::= { sapCemInfoEntry 8 } sapCemTimestampFreq OBJECT-TYPE SYNTAX Unsigned32 UNITS "8 KHz" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of the differential timestamp frequency in multiples of 8 KHz for this CEM SAP." REFERENCE "RFC 5287, section 3.8 'TDM Options'." ::= { sapCemInfoEntry 9 } sapCemReportAlarm OBJECT-TYPE SYNTAX CemSapReportAlarm MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapCemReportAlarm determines when and if to generate notifications for the CEM SAP." DEFVAL { {strayPkts, malformedPkts, pktLoss, bfrOverrun, bfrUnderrun} } ::= { sapCemInfoEntry 10 } sapCemReportAlarmStatus OBJECT-TYPE SYNTAX CemSapReportAlarm MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemReportAlarmStatus indicates the current alarms on this CEM SAP." ::= { sapCemInfoEntry 11 } sapCemLocalEcid OBJECT-TYPE SYNTAX CemSapEcid MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapCemLocalEcid specifies the local ECID. Only valid if CEM SAP belongs to an EPIPE service." DEFVAL { 0 } ::= { sapCemInfoEntry 12 } sapCemRemoteMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapCemRemoteMacAddr specifies the remote MAC address. Only valid if CEM SAP belongs to an EPIPE service." DEFVAL { '000000000000'H } ::= { sapCemInfoEntry 13 } sapCemRemoteEcid OBJECT-TYPE SYNTAX CemSapEcid MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapCemRemoteEcid specifies the remote ECID. Only valid if CEM SAP belongs to an EPIPE service." DEFVAL { 0 } ::= { sapCemInfoEntry 14 } sapCemJitterBufPackets OBJECT-TYPE SYNTAX Unsigned32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the jitter buffer length in number of packet buffers." ::= { sapCemInfoEntry 15 } sapCemPlayoutBufPacketsThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the playout buffer packets threshold in number of packet buffers." ::= { sapCemInfoEntry 16 } sapCemStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapCemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains CEM SAP statistics." ::= { tmnxSapObjs 41 } sapCemStatsEntry OBJECT-TYPE SYNTAX SapCemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for a specific CEM SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapCemStatsTable 1 } SapCemStatsEntry ::= SEQUENCE { sapCemStatsIngressForwardedPkts Counter32, sapCemStatsIngressDroppedPkts Counter32, sapCemStatsEgressForwardedPkts Counter32, sapCemStatsEgressDroppedPkts Counter32, sapCemStatsEgressMissingPkts Counter32, sapCemStatsEgressPktsReOrder Counter32, sapCemStatsEgressJtrBfrUnderruns Counter32, sapCemStatsEgressJtrBfrOverruns Counter32, sapCemStatsEgressMisOrderDropped Counter32, sapCemStatsEgressMalformedPkts Counter32, sapCemStatsEgressLBitDropped Counter32, sapCemStatsEgressMultipleDropped Counter32, sapCemStatsEgressESs Counter32, sapCemStatsEgressSESs Counter32, sapCemStatsEgressUASs Counter32, sapCemStatsEgressFailureCounts Counter32, sapCemStatsEgressUnderrunCounts Counter32, sapCemStatsEgressOverrunCounts Counter32, sapCemStatsEgressJtrBfrDepth Gauge32 } sapCemStatsIngressForwardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsIngressForwardedPkts indicates the number of packets that were successfully forwarded." ::= { sapCemStatsEntry 1 } sapCemStatsIngressDroppedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsIngressDroppedPkts indicates the total number of packets that were dropped due to errors." ::= { sapCemStatsEntry 2 } sapCemStatsEgressForwardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressForwardedPkts indicates the number of packets that were successfully forwarded." ::= { sapCemStatsEntry 3 } sapCemStatsEgressDroppedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressDroppedPkts indicates the total number of packets that were dropped due to errors." ::= { sapCemStatsEntry 4 } sapCemStatsEgressMissingPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressMissingPkts indicates the number of missing packets (as detected via control word sequence number gaps)." ::= { sapCemStatsEntry 5 } sapCemStatsEgressPktsReOrder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressPktsReOrder indicates the number of packets detected out of sequence (via control word sequence number), but successfully re-ordered." ::= { sapCemStatsEntry 6 } sapCemStatsEgressJtrBfrUnderruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressJtrBfrUnderruns indicates the number of times a packet needed to be played out and the jitter buffer was empty." ::= { sapCemStatsEntry 7 } sapCemStatsEgressJtrBfrOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressJtrBfrOverruns indicates the number of times a packet was dropped because it could not fit in the jitter buffer." ::= { sapCemStatsEntry 8 } sapCemStatsEgressMisOrderDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressMisOrderDropped indicates the number of packets detected out of order (via control word sequence numbers), and could not be re-ordered, or could not be placed in the jitter buffer because it was out of the current window." ::= { sapCemStatsEntry 9 } sapCemStatsEgressMalformedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressMalformedPkts indicates the number of packets detected with unexpected size, or bad headers' stack." ::= { sapCemStatsEntry 10 } sapCemStatsEgressLBitDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressLBitDropped indicates the number of packets dropped due to the L bit set by the far end." ::= { sapCemStatsEntry 11 } sapCemStatsEgressMultipleDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressMultipleDropped indicates the number of packets dropped due to multiple sequence numbers." ::= { sapCemStatsEntry 12 } sapCemStatsEgressESs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressESs indicates the number of Error Seconds (ESs) encountered. Any malformed packet, seq. error, LOPS and similar are considered as error seconds." ::= { sapCemStatsEntry 13 } sapCemStatsEgressSESs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressSESs indicates the number of Severely Error Seconds (SESs) encountered. This is when more than 30 percent of the packets within a one second window are missing." ::= { sapCemStatsEntry 14 } sapCemStatsEgressUASs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressUASs indicates the number of Unavailable Seconds (UASs) encountered. Any consecutive ten seconds of SESs are counted as one UAS." ::= { sapCemStatsEntry 15 } sapCemStatsEgressFailureCounts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressFailureCounts indicates the number failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared." ::= { sapCemStatsEntry 16 } sapCemStatsEgressUnderrunCounts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressUnderrunCounts indicates the number of times the jitter buffer went into an underrun state." ::= { sapCemStatsEntry 17 } sapCemStatsEgressOverrunCounts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressOverrunCounts indicates the number of times the jitter buffer went into an overrun state." ::= { sapCemStatsEntry 18 } sapCemStatsEgressJtrBfrDepth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapCemStatsEgressJtrBfrDepth indicates the current packet depth of the jitter buffer." ::= { sapCemStatsEntry 19 } sapTlsL2ptStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsL2ptStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP Layer 2 Protocol Tunneling Statistics. This table complements sapTlsInfoTable. Rows in this table are created and deleted automatically by the system." ::= { tmnxSapObjs 42 } sapTlsL2ptStatsEntry OBJECT-TYPE SYNTAX SapTlsL2ptStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Layer 2 Protocol Tunneling Statistics for a specific SAP. The statistics are provided for each combination of Destination Address and LLC SNAP type." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTlsL2ptStatsTable 1 } SapTlsL2ptStatsEntry ::= SEQUENCE { sapTlsL2ptStatsLastClearedTime TimeStamp, sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32, sapTlsL2ptStatsStpConfigBpdusRx Counter32, sapTlsL2ptStatsStpConfigBpdusTx Counter32, sapTlsL2ptStatsStpRstBpdusRx Counter32, sapTlsL2ptStatsStpRstBpdusTx Counter32, sapTlsL2ptStatsStpTcnBpdusRx Counter32, sapTlsL2ptStatsStpTcnBpdusTx Counter32, sapTlsL2ptStatsPvstConfigBpdusRx Counter32, sapTlsL2ptStatsPvstConfigBpdusTx Counter32, sapTlsL2ptStatsPvstRstBpdusRx Counter32, sapTlsL2ptStatsPvstRstBpdusTx Counter32, sapTlsL2ptStatsPvstTcnBpdusRx Counter32, sapTlsL2ptStatsPvstTcnBpdusTx Counter32, sapTlsL2ptStatsOtherBpdusRx Counter32, sapTlsL2ptStatsOtherBpdusTx Counter32, sapTlsL2ptStatsOtherL2ptBpdusRx Counter32, sapTlsL2ptStatsOtherL2ptBpdusTx Counter32, sapTlsL2ptStatsOtherInvalidBpdusRx Counter32, sapTlsL2ptStatsOtherInvalidBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32, sapTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32, sapTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32, sapTlsL2ptStatsCdpBpdusRx Counter32, sapTlsL2ptStatsCdpBpdusTx Counter32, sapTlsL2ptStatsVtpBpdusRx Counter32, sapTlsL2ptStatsVtpBpdusTx Counter32, sapTlsL2ptStatsDtpBpdusRx Counter32, sapTlsL2ptStatsDtpBpdusTx Counter32, sapTlsL2ptStatsPagpBpdusRx Counter32, sapTlsL2ptStatsPagpBpdusTx Counter32, sapTlsL2ptStatsUdldBpdusRx Counter32, sapTlsL2ptStatsUdldBpdusTx Counter32 } sapTlsL2ptStatsLastClearedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet." ::= { sapTlsL2ptStatsEntry 1 } sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the number of L2PT encapsulated STP config bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 2 } sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the number of L2PT encapsulated STP config bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 3 } sapTlsL2ptStatsL2ptEncapStpRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the number of L2PT encapsulated STP rst bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 4 } sapTlsL2ptStatsL2ptEncapStpRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the number of L2PT encapsulated STP rst bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 5 } sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the number of L2PT encapsulated STP tcn bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 6 } sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the number of L2PT encapsulated STP tcn bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 7 } sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the number of L2PT encapsulated PVST config bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 8 } sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the number of L2PT encapsulated PVST config bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 9 } sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the number of L2PT encapsulated PVST rst bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 10 } sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the number of L2PT encapsulated PVST rst bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 11 } sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the number of L2PT encapsulated PVST tcn bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 12 } sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 13 } sapTlsL2ptStatsStpConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsStpConfigBpdusRx indicates the number of STP config bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 14 } sapTlsL2ptStatsStpConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsStpConfigBpdusTx indicates the number of STP config bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 15 } sapTlsL2ptStatsStpRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsStpRstBpdusRx indicates the number of STP rst bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 16 } sapTlsL2ptStatsStpRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsStpRstBpdusTx indicates the number of STP rst bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 17 } sapTlsL2ptStatsStpTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsStpTcnBpdusRx indicates the number of STP tcn bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 18 } sapTlsL2ptStatsStpTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsStpTcnBpdusTx indicates the number of STP tcn bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 19 } sapTlsL2ptStatsPvstConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the number of PVST config bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 20 } sapTlsL2ptStatsPvstConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the number of PVST config bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 21 } sapTlsL2ptStatsPvstRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPvstRstBpdusRx indicates the number of PVST rst bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 22 } sapTlsL2ptStatsPvstRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPvstRstBpdusTx indicates the number of PVST rst bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 23 } sapTlsL2ptStatsPvstTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the number of PVST tcn bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 24 } sapTlsL2ptStatsPvstTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the number of PVST tcn bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 25 } sapTlsL2ptStatsOtherBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsOtherBpdusRx indicates the number of other bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 26 } sapTlsL2ptStatsOtherBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsOtherBpdusTx indicates the number of other bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 27 } sapTlsL2ptStatsOtherL2ptBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the number of other L2PT bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 28 } sapTlsL2ptStatsOtherL2ptBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the number of other L2PT bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 29 } sapTlsL2ptStatsOtherInvalidBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the number of other invalid bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 30 } sapTlsL2ptStatsOtherInvalidBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the number of other invalid bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 31 } sapTlsL2ptStatsL2ptEncapCdpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number of L2PT encapsulated CDP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 32 } sapTlsL2ptStatsL2ptEncapCdpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number of L2PT encapsulated CDP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 33 } sapTlsL2ptStatsL2ptEncapVtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number of L2PT encapsulated VTP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 34 } sapTlsL2ptStatsL2ptEncapVtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number of L2PT encapsulated VTP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 35 } sapTlsL2ptStatsL2ptEncapDtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number of L2PT encapsulated DTP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 36 } sapTlsL2ptStatsL2ptEncapDtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number of L2PT encapsulated DTP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 37 } sapTlsL2ptStatsL2ptEncapPagpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number of L2PT encapsulated PAGP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 38 } sapTlsL2ptStatsL2ptEncapPagpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number of L2PT encapsulated PAGP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 39 } sapTlsL2ptStatsL2ptEncapUdldBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number of L2PT encapsulated UDLD bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 40 } sapTlsL2ptStatsL2ptEncapUdldBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number of L2PT encapsulated UDLD bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 41 } sapTlsL2ptStatsCdpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsCdpBpdusRx indicates the number of CDP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 42 } sapTlsL2ptStatsCdpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsCdpBpdusTx indicates the number of CDP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 43 } sapTlsL2ptStatsVtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsVtpBpdusRx indicates the number of VTP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 44 } sapTlsL2ptStatsVtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsVtpBpdusTx indicates the number of VTP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 45 } sapTlsL2ptStatsDtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsDtpBpdusRx indicates the number of DTP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 46 } sapTlsL2ptStatsDtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsDtpBpdusTx indicates the number of DTP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 47 } sapTlsL2ptStatsPagpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPagpBpdusRx indicates the number of PAGP bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 48 } sapTlsL2ptStatsPagpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsPagpBpdusTx indicates the number of PAGP bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 49 } sapTlsL2ptStatsUdldBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsUdldBpdusRx indicates the number of UDLD bpdus received on this SAP." ::= { sapTlsL2ptStatsEntry 50 } sapTlsL2ptStatsUdldBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsL2ptStatsUdldBpdusTx indicates the number of UDLD bpdus transmitted on this SAP." ::= { sapTlsL2ptStatsEntry 51 } sapEthernetInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEthernetInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Ethernet SAP information." ::= { tmnxSapObjs 43 } sapEthernetInfoEntry OBJECT-TYPE SYNTAX SapEthernetInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific Ethernet SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapEthernetInfoTable 1 } SapEthernetInfoEntry ::= SEQUENCE { sapEthernetLLFAdminStatus ServiceAdminStatus, sapEthernetLLFOperStatus INTEGER } sapEthernetLLFAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "sapEthernetLLFAdminStatus specifies whether or not Link- Loss Forwarding is enabled ('up'). When this object is set to 'up' the underlying port will be forced into the operationally 'down' state if the service is operationally 'down', or any of the 'sdpBindPwPeerStatusBits' are set, and will set the underlying port's tmnxPortEtherReasonDownFlags 'linklossFwd' bit. Setting this object to 'down' will clear the 'linklossFwd' reason. sapEthernetLLFAdminStatus can only be enabled on saps configured for an EPIPE service using an Ethernet port with the tmnxPortEncapType set to 'nullEncap.'" DEFVAL { down } ::= { sapEthernetInfoEntry 1 } sapEthernetLLFOperStatus OBJECT-TYPE SYNTAX INTEGER { fault (1), clear (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "sapEthernetLLFOperStatus indicates whether or not the underlying port is forced operationally 'down' due to the service being operationally 'down' or an sdpBindPwPeerStatusBits bit is set. sapEthernetLLFOperStatus is set to 'fault' when the sapEthernetLLFAdminStatus is set to 'up,' and either a fault has occurred on the pseudo-wire, or the service is down, otherwise sapEthernetLLFOperStatus is set to 'clear.'" ::= { sapEthernetInfoEntry 2 } msapPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The msapPlcyTable has an entry for each managed SAP(MSAP) policy configured in the system." ::= { tmnxSapObjs 44 } msapPlcyEntry OBJECT-TYPE SYNTAX MsapPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the configuration for a managed SAP(MSAP) policy. The values for each entry will be used to populate the following tables when the MSAP policy is applied to a MSAP: TIMETRA-SAP-MIB::sapBaseInfoTable TIMETRA-SAP-MIB::sapSubMgmtInfoTable" INDEX { msapPlcyName } ::= { msapPlcyTable 1 } MsapPlcyEntry ::= SEQUENCE { msapPlcyName TNamedItem, msapPlcyRowStatus RowStatus, msapPlcyLastChanged TimeStamp, msapPlcyDescription TItemDescription, msapPlcyCpmProtPolicyId TCpmProtPolicyID, msapPlcyCpmProtMonitorMac TruthValue, msapPlcySubMgmtDefSubId TmnxDefSubIdSource, msapPlcySubMgmtDefSubIdStr TLNamedItemOrEmpty, msapPlcySubMgmtDefSubProfile TNamedItemOrEmpty, msapPlcySubMgmtDefSlaProfile TNamedItemOrEmpty, msapPlcySubMgmtDefAppProfile TNamedItemOrEmpty, msapPlcySubMgmtSubIdPlcy TPolicyStatementNameOrEmpty, msapPlcySubMgmtSubscriberLimit TmnxSapSubscriberLimit, msapPlcySubMgmtProfiledTrafOnly TruthValue, msapPlcySubMgmtNonSubTrafSubId TLNamedItemOrEmpty, msapPlcySubMgmtNonSubTrafSubProf TNamedItemOrEmpty, msapPlcySubMgmtNonSubTrafSlaProf TNamedItemOrEmpty, msapPlcySubMgmtNonSubTrafAppProf TNamedItemOrEmpty, msapPlcyAssociatedMsaps Counter32, msapPlcySubMgmtDefInterDestId TmnxDefInterDestIdSource, msapPlcySubMgmtDefInterDestIdStr TNamedItemOrEmpty, msapPlcyIgmpTrkExpiryTime Unsigned32, msapPlcyIgmpTrkImportPlcy TPolicyStatementNameOrEmpty, msapPlcyIgmpTrkMaxNbrGrps Unsigned32, msapPlcyIgmpTrkMaxNbrSrcs Unsigned32, msapPlcySubMgmtDefFilterProfile TNamedItemOrEmpty, msapPlcyLagLinkMapProfile TmnxLinkMapProfileIdOrZero, msapPlcyIgmpTrkMaxNbrGrpSrcs Unsigned32, msapPlcyDCpuProtPolicy TNamedItemOrEmpty, msapPlcyCpmProtMonitorIP TruthValue, msapPlcySticky TruthValue, msapPlcyStickyTimeout Unsigned32 } msapPlcyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of msapPlcyName specifies the name of the MSAP policy." ::= { msapPlcyEntry 1 } msapPlcyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyRowStatus is used for the creation and deletion of MSAP policies." ::= { msapPlcyEntry 2 } msapPlcyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { msapPlcyEntry 3 } msapPlcyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyDescription specifies the description of the MSAP policy." DEFVAL { "" } ::= { msapPlcyEntry 4 } msapPlcyCpmProtPolicyId OBJECT-TYPE SYNTAX TCpmProtPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyCpmProtPolicyId specifies a CPM Protection policy for the MSAP policy. If a corresponding policy is not defined in TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue' error will be returned. A value of 254 specifies that the default CPM Protection policy is associated with the Managed SAP. This object is not supported on 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtPolicyId to a non-zero value on one of these unsupported chassis types will return an 'inconsistentValue' error." DEFVAL { 254 } ::= { msapPlcyEntry 5 } msapPlcyCpmProtMonitorMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy, as specified by msapPlcyCpmProtPolicyId, must be applied. If the value of msapPlcyCpmProtMonitorMac is 'true', the per-source rate limit must be applied. If the value of msapPlcyCpmProtPolicyId is equal to zero, the value of msapPlcyCpmProtMonitorMac is irrelevant and will be ignored. This object is not supported on 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtMonitorMac to 'true' on one of these unsupported chassis types will return an 'inconsistentValue' error." DEFVAL { false } ::= { msapPlcyEntry 6 } msapPlcySubMgmtDefSubId OBJECT-TYPE SYNTAX TmnxDefSubIdSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefSubId specifies what will be used as the default subscriber identification applicable on the MSAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this object is set to 'useSapId', the SAP-id will be used as the default subscriber identification string. In this case, msapPlcySubMgmtDefSubIdStr must contain the empty string, so any non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty string. If the value of this object is set to 'useAutoId', the auto-generated subscriber identification string, as defined in tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber identification string. In this case, msapPlcySubMgmtDefSubIdStr must contain the empty string, so any non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty string. If the value of this object is set to 'useString', the value of msapPlcySubMgmtDefSubIdStr will be used as the default subscriber identification string. In this case, an empty msapPlcySubMgmtDefSubIdStr means that there is no default subscriber identification configured." DEFVAL { useString } ::= { msapPlcyEntry 7 } msapPlcySubMgmtDefSubIdStr OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefSubIdStr specifies the default subscriber identification string applicable on this MSAP." DEFVAL { "" } ::= { msapPlcyEntry 8 } msapPlcySubMgmtDefSubProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefSubProfile specifies the default subscriber profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSubProfileTable, an 'inconsistentValue' error will be returned. A value of 'default' is not allowed for this object." DEFVAL { "" } ::= { msapPlcyEntry 9 } msapPlcySubMgmtDefSlaProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefSlaProfile specifies the default SLA profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSLAProfileTable, an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { msapPlcyEntry 10 } msapPlcySubMgmtDefAppProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefAppProfile specifies the default application profile applicable on the MSAP. If a corresponding profile is not defined in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable, an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { msapPlcyEntry 11 } msapPlcySubMgmtSubIdPlcy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtSubIdPlcy specifies the subscriber identification policy applicable on the MSAP. If a corresponding profile is not defined in tmnxSubIdentPolicyTable, an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { msapPlcyEntry 12 } msapPlcySubMgmtSubscriberLimit OBJECT-TYPE SYNTAX TmnxSapSubscriberLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for the MSAP. A value is 0 means there is no limit. The values for the objects msapPlcySubMgmtProfiledTrafOnly, msapPlcySubMgmtNonSubTrafSubProf, and msapPlcySubMgmtNonSubTrafSlaProf are only meaningful when the value of msapPlcySubMgmtSubscriberLimit is 1 and will not be used when the value of msapPlcySubMgmtSubscriberLimit is not 1." DEFVAL { 1 } ::= { msapPlcyEntry 13 } msapPlcySubMgmtProfiledTrafOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtProfiledTrafOnly specifies whether only profiled traffic is applicable for the MSAP. If set to 'true', the MSAP queues will be deleted. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1." DEFVAL { false } ::= { msapPlcyEntry 14 } msapPlcySubMgmtNonSubTrafSubId OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtNonSubTrafSubId specifies the subscriber identification applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { msapPlcyEntry 15 } msapPlcySubMgmtNonSubTrafSubProf OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtNonSubTrafSubProf specifies the subscriber profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { msapPlcyEntry 16 } msapPlcySubMgmtNonSubTrafSlaProf OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtNonSubTrafSlaProf specifies the SLA profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { msapPlcyEntry 17 } msapPlcySubMgmtNonSubTrafAppProf OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtNonSubTrafAppProf specifies the Application profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1." DEFVAL { "" } ::= { msapPlcyEntry 18 } msapPlcyAssociatedMsaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapPlcyAssociatedMsaps indicates the number of MSAPs associated with this MSAP policy." ::= { msapPlcyEntry 19 } msapPlcySubMgmtDefInterDestId OBJECT-TYPE SYNTAX TmnxDefInterDestIdSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefInterDestId specifies what will be used as the default intermediate destination identifier applicable on the MSAP. This value is used in case no other source (like Radius) provides an intermediate destination identifier. If the value of this object is set to 'useString', the value of msapPlcySubMgmtDefInterDestIdStr will be used as the default intermediate destination identifier. In this case, an empty msapPlcySubMgmtDefInterDestIdStr means that there is no default intermediate destination identifier configured. If the value of this object is set to 'useTopQTag', the top q-tag of the MSAP will be used as the default intermediate destination identifier. In this case, msapPlcySubMgmtDefInterDestIdStr must contain the empty string. If the value of this object is set to 'useVpi', the ATM VPI of the MSAP will be used as the default intermediate destination identifier. In this case, msapPlcySubMgmtDefInterDestIdStr must contain the empty string." DEFVAL { useString } ::= { msapPlcyEntry 20 } msapPlcySubMgmtDefInterDestIdStr OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefInterDestIdStr specifies the default subscriber identification string applicable on this MSAP." DEFVAL { "" } ::= { msapPlcyEntry 21 } msapPlcyIgmpTrkExpiryTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyIgmpTrkExpiryTime specifies the time in seconds that this system continues to track an inactive host. The value zero specifies that the value must be set to the actual value of the object svcIgmpTrkExpiryTime of the service an MSAP belongs to." DEFVAL { 0 } ::= { msapPlcyEntry 22 } msapPlcyIgmpTrkImportPlcy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object msapPlcyIgmpTrkImportPlcy specifies the policy statement that must be applied to all incoming IGMP messages on the MSAP." DEFVAL { "" } ::= { msapPlcyEntry 23 } msapPlcyIgmpTrkMaxNbrGrps OBJECT-TYPE SYNTAX Unsigned32 (0..16000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object msapPlcyIgmpTrkMaxNbrGrps specifies how many group addresses are allowed for the MSAP. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { msapPlcyEntry 24 } msapPlcyIgmpTrkMaxNbrSrcs OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object msapPlcyIgmpTrkMaxNbrSrcs specifies how many source addresses are allowed per group address for the MSAP. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { msapPlcyEntry 25 } msapPlcySubMgmtDefFilterProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySubMgmtDefFilterProfile specifies the default filter profile applicable on the MSAP. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable." DEFVAL { "" } ::= { msapPlcyEntry 26 } msapPlcyLagLinkMapProfile OBJECT-TYPE SYNTAX TmnxLinkMapProfileIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyLagLinkMapProfile specifies the LAG link map profile identifier associated with this MSAP policy." DEFVAL { 0 } ::= { msapPlcyEntry 27 } msapPlcyIgmpTrkMaxNbrGrpSrcs OBJECT-TYPE SYNTAX Unsigned32 (0..32000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object msapPlcyIgmpTrkMaxNbrGrpSrcs specifies how many combinations of group and source are allowed. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { msapPlcyEntry 28 } msapPlcyDCpuProtPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyDCpuProtPolicy associates Distributed CPU Protection Policy with a MSAP policy." DEFVAL { ''H } ::= { msapPlcyEntry 29 } msapPlcyCpmProtMonitorIP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyCpmProtMonitorIP specifies whether or not to apply the tmnxCpmProtPolPerSrcRateLimit of this MSAP policy's CPM Protection policy to IPv4 DHCP packets served by the MSAP policy, on a per source IP address basis. For example, suppose msapPlcyCpmProtMonitorIP is 'true', and this MSAP policy's msapPlcyCpmProtPolicyId points to a policy table row with tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two source IP addresses (e.g. 138.120.141.173 and 138.120.141.174) each send 150 DHCP packets/second to this SAP. Approx. 50 DHCP packets/second from each source will be discarded. If the value of msapPlcyCpmProtPolicyId is equal to zero, the value of msapPlcyCpmProtMonitorIP is irrelevant and will be ignored. This object is not supported on 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtMonitorIP to a non-zero value on one of these unsupported chassis types will return an 'inconsistentValue' error." DEFVAL { false } ::= { msapPlcyEntry 30 } msapPlcySticky OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcySticky specifies if the associated managed SAPs are sticky. The system does not remove a sticky managed SAP automatically when it becomes idle. A sticky managed SAP is only removed upon explicit request of a management client or when the timeout specified in msapPlcyStickyTimeout expires ." DEFVAL { false } ::= { msapPlcyEntry 33 } msapPlcyStickyTimeout OBJECT-TYPE SYNTAX Unsigned32 (0 | 5..604800) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapPlcyStickyTimeout specifies the timeout period to be used for sticky managed SAPs. The value '0' has the meaning of 'infinite'" DEFVAL { 0 } ::= { msapPlcyEntry 34 } msapTlsPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapTlsPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The msapTlsPlcyTable has an entry for each managed SAP (MSAP) policy configured in the system." ::= { tmnxSapObjs 45 } msapTlsPlcyEntry OBJECT-TYPE SYNTAX MsapTlsPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the VPLS-related configuration for a managed SAP (MSAP) policy. The values for each entry will be used to populate the following VPLS-related tables when the MSAP policy is applied to a MSAP: TIMETRA-SAP-MIB::sapTlsInfoTable TIMETRA-SAP-MIB::sapTlsDhcpInfoTable ALCATEL-IGMP-SNOOPING-MIB::tlsIgmpSnpgConfigTable" AUGMENTS { msapPlcyEntry } ::= { msapTlsPlcyTable 1 } MsapTlsPlcyEntry ::= SEQUENCE { msapTlsPlcyLastChanged TimeStamp, msapTlsPlcySplitHorizonGrp TNamedItemOrEmpty, msapTlsPlcyArpReplyAgent INTEGER, msapTlsPlcySubMgmtMacDaHashing TruthValue, msapTlsPlcyDhcpLeasePopulate Unsigned32, msapTlsPlcyDhcpPrxyAdminState TmnxEnabledDisabled, msapTlsPlcyDhcpPrxyServAddrType InetAddressType, msapTlsPlcyDhcpPrxyServAddr InetAddress, msapTlsPlcyDhcpPrxyLeaseTime Unsigned32, msapTlsPlcyDhcpPrxyLTRadOverride TruthValue, msapTlsPlcyDhcpInfoAction INTEGER, msapTlsPlcyDhcpCircuitId INTEGER, msapTlsPlcyDhcpRemoteId INTEGER, msapTlsPlcyDhcpRemoteIdString TNamedItemOrEmpty, msapTlsPlcyDhcpVendorInclOpts BITS, msapTlsPlcyDhcpVendorOptStr TNamedItemOrEmpty, msapTlsPlcyEgressMcastGroup TNamedItemOrEmpty, msapTlsPlcyIgmpSnpgImportPlcy TPolicyStatementNameOrEmpty, msapTlsPlcyIgmpSnpgFastLeave TmnxEnabledDisabled, msapTlsPlcyIgmpSnpgSendQueries TmnxEnabledDisabled, msapTlsPlcyIgmpSnpgGenQueryIntv Unsigned32, msapTlsPlcyIgmpSnpgQueryRespIntv Unsigned32, msapTlsPlcyIgmpSnpgRobustCount Unsigned32, msapTlsPlcyIgmpSnpgLastMembIntvl Unsigned32, msapTlsPlcyIgmpSnpgMaxNbrGrps Unsigned32, msapTlsPlcyIgmpSnpgMvrFromVplsId TmnxServId, msapTlsPlcyIgmpSnpgVersion TmnxIgmpVersion, msapTlsPlcyIgmpSnpgMcacPlcyName TPolicyStatementNameOrEmpty, msapTlsPlcyIgmpSnpgMcacUncnstBW Integer32, msapTlsPlcyIgmpSnpgMcacPrRsvMnBW Integer32, msapTlsPlcyArpHostMaxNumHosts Unsigned32, msapTlsPlcyArpHostMinAuthIntvl Unsigned32, msapTlsPlcyIgmpSnpgMcacUsePortWt TruthValue, msapTlsPlcyIngQosPolicyId TSapIngressPolicyID, msapTlsPlcyIngQosQueueingType INTEGER, msapTlsPlcyIgmpSnpgMcIfPlcyName TPolicyStatementNameOrEmpty, msapTlsPlcyEgrQosPolicyId TSapEgressPolicyID } msapTlsPlcyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapTlsPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { msapTlsPlcyEntry 1 } msapTlsPlcySplitHorizonGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcySplitHorizonGrp specifies the name of the split-horizon group for the MSAP. If the name specified does not correspond to a tlsShgInfoEntry for the VPLS service, the creation of the MSAP will fail. Additionally, if msapTlsPlcySplitHorizonGrp is set to a new value, the sapSplitHorizonGrp object for any existing MSAPs created by this policy will not be updated." DEFVAL { "" } ::= { msapTlsPlcyEntry 2 } msapTlsPlcyArpReplyAgent OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), enabledWithSubscrIdent (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with the MSAP. 'disabled' - the ARP reply function is not operational 'enabled' - the ARP reply function is enabled without subscriber identification. 'enabledWithSubscrIdent' - the ARP reply function is enabled with subscriber identification." DEFVAL { disabled } ::= { msapTlsPlcyEntry 3 } msapTlsPlcySubMgmtMacDaHashing OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcySubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG MSAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id." DEFVAL { false } ::= { msapTlsPlcyEntry 4 } msapTlsPlcyDhcpLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (1..131071) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on the MSAP." DEFVAL { 1 } ::= { msapTlsPlcyEntry 5 } msapTlsPlcyDhcpPrxyAdminState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired administrative state of the proxy server on the interface." DEFVAL { disabled } ::= { msapTlsPlcyEntry 6 } msapTlsPlcyDhcpPrxyServAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type of msapTlsPlcyDhcpPrxyServAddr." DEFVAL { unknown } ::= { msapTlsPlcyEntry 7 } msapTlsPlcyDhcpPrxyServAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the which will be used as the source address of the emulated DHCP server in the context of the VPLS MSAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by the VPLS." DEFVAL { ''H } ::= { msapTlsPlcyEntry 8 } msapTlsPlcyDhcpPrxyLeaseTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 300..315446399) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long a DHCP client is allowed to use the offered IP address. A value of 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A value of 7 days (315446399 seconds) is used when RADIUS does not provide a lease time." DEFVAL { 0 } ::= { msapTlsPlcyEntry 9 } msapTlsPlcyDhcpPrxyLTRadOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy server will always make use of msapTlsPlcyDhcpPrxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When msapTlsPlcyDhcpPrxyLTRadOverride is set to 'true', the proxy server will use the lease time information provided by the RADIUS server, regardless of the configured lease time." DEFVAL { false } ::= { msapTlsPlcyEntry 10 } msapTlsPlcyDhcpInfoAction OBJECT-TYPE SYNTAX INTEGER { replace (1), drop (2), keep (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option 82 information is also present 'keep' - retain the existing relay information" DEFVAL { keep } ::= { msapTlsPlcyEntry 11 } msapTlsPlcyDhcpCircuitId OBJECT-TYPE SYNTAX INTEGER { none (0), asciiTuple (1), vlanAsciiTuple (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: none - the circuit-id suboption will not be part of the information option (Option 82). asciiTuple - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface name is used. vlanAsciiTuple - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet." DEFVAL { asciiTuple } ::= { msapTlsPlcyEntry 12 } msapTlsPlcyDhcpRemoteId OBJECT-TYPE SYNTAX INTEGER { none (1), mac (2), remote-id (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remote-id', msapTlsPlcyDhcpRemoteIdString will represent the remote-id. By default, the remote-id value is none." DEFVAL { none } ::= { msapTlsPlcyEntry 13 } msapTlsPlcyDhcpRemoteIdString OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The value of this object is ignored if msapTlsPlcyDhcpRemoteId does not have the value of 'remote-id'." DEFVAL { "" } ::= { msapTlsPlcyEntry 14 } msapTlsPlcyDhcpVendorInclOpts OBJECT-TYPE SYNTAX BITS { systemId (0), clientMac (1), serviceId (2), sapId (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the Nokia vendor specific sub-option of option 82. The value of this object is only used when msapTlsPlcyDhcpInfoAction is 'replace'." DEFVAL { {} } ::= { msapTlsPlcyEntry 15 } msapTlsPlcyDhcpVendorOptStr OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes into the Nokia vendor specific sub-option of option 82. This string is only used when msapTlsPlcyDhcpInfoAction is set to 'replace'." DEFVAL { "" } ::= { msapTlsPlcyEntry 16 } msapTlsPlcyEgressMcastGroup OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast Group for the MSAP." DEFVAL { "" } ::= { msapTlsPlcyEntry 17 } msapTlsPlcyIgmpSnpgImportPlcy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement that is be applied to all incoming IGMP messages on the MSAP." DEFVAL { "" } ::= { msapTlsPlcyEntry 18 } msapTlsPlcyIgmpSnpgFastLeave OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgFastLeave specifies whether fast leave is allowed on this MSAP. If set to 'enabled', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout." DEFVAL { disabled } ::= { msapTlsPlcyEntry 19 } msapTlsPlcyIgmpSnpgSendQueries OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgSendQueries specifies whether the system generates General Queries by itself on the MSAP." DEFVAL { disabled } ::= { msapTlsPlcyEntry 20 } msapTlsPlcyIgmpSnpgGenQueryIntv OBJECT-TYPE SYNTAX Unsigned32 (2..1024) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies the interval (in seconds) between two consecutive general queries sent by the system on the MSAP. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'." DEFVAL { 125 } ::= { msapTlsPlcyEntry 21 } msapTlsPlcyIgmpSnpgQueryRespIntv OBJECT-TYPE SYNTAX Unsigned32 (1..1023) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'." DEFVAL { 10 } ::= { msapTlsPlcyEntry 22 } msapTlsPlcyIgmpSnpgRobustCount OBJECT-TYPE SYNTAX Unsigned32 (2..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgRobustCount specifies the robustness variable on the MSAP. This object allows tuning for the expected packet loss on the MSAP. If a MSAP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'." DEFVAL { 2 } ::= { msapTlsPlcyEntry 23 } msapTlsPlcyIgmpSnpgLastMembIntvl OBJECT-TYPE SYNTAX Unsigned32 (1..50) UNITS "deciseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the Max Response Time (in deciseconds) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group." DEFVAL { 10 } ::= { msapTlsPlcyEntry 24 } msapTlsPlcyIgmpSnpgMaxNbrGrps OBJECT-TYPE SYNTAX Unsigned32 (0..16000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group addresses are allowed for the MSAP. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { msapTlsPlcyEntry 25 } msapTlsPlcyIgmpSnpgMvrFromVplsId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which VPLS the multicast streams corresponding to the groups learned via the MSAP are copied. Groups which cannot be joined to the corresponding MVR VPLS (because MVR is not up or the configured MVR policy rejects the group) copy the multicast streams from the local VPLS if IGMP snooping is up (i.e. tlsIgmpSnpgCfgAdminState is 'enabled')." DEFVAL { 0 } ::= { msapTlsPlcyEntry 26 } msapTlsPlcyIgmpSnpgVersion OBJECT-TYPE SYNTAX TmnxIgmpVersion MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgVersion specifies the version of IGMP running on the MSAP." DEFVAL { version3 } ::= { msapTlsPlcyEntry 27 } msapTlsPlcyIgmpSnpgMcacPlcyName OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name of the multicast CAC (Connection Admission Control) policy." DEFVAL { "" } ::= { msapTlsPlcyEntry 28 } msapTlsPlcyIgmpSnpgMcacUncnstBW OBJECT-TYPE SYNTAX Integer32 (-1 | 0..2147483647) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilobit(s) per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface." DEFVAL { -1 } ::= { msapTlsPlcyEntry 29 } msapTlsPlcyIgmpSnpgMcacPrRsvMnBW OBJECT-TYPE SYNTAX Integer32 (-1 | 0..2147483647) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilobit(s) per second(kbps). If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is '0', no mandatory channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is '-1', then all mandatory and optional channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is equal to the value of msapTlsPlcyIgmpSnpgMcacUncnstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW should always be less than or equal to that of msapTlsPlcyIgmpSnpgMcacUncnstBW. An attempt to set the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW greater than that of msapTlsPlcyIgmpSnpgMcacUncnstBW will result in 'inconsistentValue' error." DEFVAL { -1 } ::= { msapTlsPlcyEntry 30 } msapTlsPlcyArpHostMaxNumHosts OBJECT-TYPE SYNTAX Unsigned32 (1..131071) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyArpHostMaxNumHosts specifies the maximum number of ARP hosts allowed on the TLS MSAP." DEFVAL { 1 } ::= { msapTlsPlcyEntry 31 } msapTlsPlcyArpHostMinAuthIntvl OBJECT-TYPE SYNTAX Unsigned32 (1..6000) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyArpHostMinAuthIntvl specifies the minimum interval between two consecutive authentication attempts for the same ARP host." DEFVAL { 15 } ::= { msapTlsPlcyEntry 32 } msapTlsPlcyIgmpSnpgMcacUsePortWt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgMcacUsePortWt specifies if this system must use the LAG port weight while calculating Multicast CAC constraints. The LAG port weight is configured with the object TIMETRA-LAG-MIB::tLagPortWeightSpeed." DEFVAL { false } ::= { msapTlsPlcyEntry 33 } msapTlsPlcyIngQosPolicyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIngQosPolicyId specifies the ingress QoS policy applicable to this MSAP policy in VPLS (L2) services. The corresponding policy is defined in TIMETRA-QOS-MIB::tSapIngressTable." DEFVAL { 1 } ::= { msapTlsPlcyEntry 34 } msapTlsPlcyIngQosQueueingType OBJECT-TYPE SYNTAX INTEGER { multipointShared (1), serviceQueueing (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIngQosQueueingType specifies the ingress queueing type applicable to this MSAP policy in VPLS (L2) services." DEFVAL { multipointShared } ::= { msapTlsPlcyEntry 35 } msapTlsPlcyIgmpSnpgMcIfPlcyName OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyIgmpSnpgMcIfPlcyName specifies the name of the multicast CAC (Connection Admission Control) interface policy." DEFVAL { "" } ::= { msapTlsPlcyEntry 36 } msapTlsPlcyEgrQosPolicyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyEgrQosPolicyId specifies the egress QoS policy applicable to this MSAP policy in VPLS (L2) services. The value must correspond to a conceptual row in the TIMETRA-QOS-MIB::tSapEgressTable." DEFVAL { 1 } ::= { msapTlsPlcyEntry 37 } msapIgmpSnpgMcacLevelTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapIgmpSnpgMcacLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The msapIgmpSnpgMcacLevelTable has an entry for each multicast CAC policy constraint level configured for a Managed SAP policy." ::= { tmnxSapObjs 46 } msapIgmpSnpgMcacLevelEntry OBJECT-TYPE SYNTAX MsapIgmpSnpgMcacLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a multicast CAC policy bundle level constraints for a particular Managed SAP policy. Entries are created and deleted by the user." INDEX { msapPlcyName, msapIgmpSnpgMcacLevelId } ::= { msapIgmpSnpgMcacLevelTable 1 } MsapIgmpSnpgMcacLevelEntry ::= SEQUENCE { msapIgmpSnpgMcacLevelId Unsigned32, msapIgmpSnpgMcacLevelRowStatus RowStatus, msapIgmpSnpgMcacLevelLastChanged TimeStamp, msapIgmpSnpgMcacLevelBW Unsigned32 } msapIgmpSnpgMcacLevelId OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLevelId indicates the level id of the multicast CAC policy bundle constraint. The value of level 1 has the highest priority and level 8 the lowest." ::= { msapIgmpSnpgMcacLevelEntry 1 } msapIgmpSnpgMcacLevelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLevelRowStatus is used for creation and deletion of level constraint in a CAC for a Managed SAP policy." ::= { msapIgmpSnpgMcacLevelEntry 2 } msapIgmpSnpgMcacLevelLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLevelLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { msapIgmpSnpgMcacLevelEntry 3 } msapIgmpSnpgMcacLevelBW OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLevelBW specifies the bandwidth in kilobit(s) per second (kbps) for the level." DEFVAL { 1 } ::= { msapIgmpSnpgMcacLevelEntry 4 } msapIgmpSnpgMcacLagTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapIgmpSnpgMcacLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The msapIgmpSnpgMcacLagTable has an entry for each lag port configured for a multicast CAC policy bundle configured for a Managed SAP policy." ::= { tmnxSapObjs 47 } msapIgmpSnpgMcacLagEntry OBJECT-TYPE SYNTAX MsapIgmpSnpgMcacLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular multicast CAC lag port constraints for a Managed SAP policy.. Entries are created and deleted by the user." INDEX { msapPlcyName, msapIgmpSnpgMcacLagPortsDown } ::= { msapIgmpSnpgMcacLagTable 1 } MsapIgmpSnpgMcacLagEntry ::= SEQUENCE { msapIgmpSnpgMcacLagPortsDown Unsigned32, msapIgmpSnpgMcacLagRowStatus RowStatus, msapIgmpSnpgMcacLagLastChanged TimeStamp, msapIgmpSnpgMcacLagLevel Unsigned32 } msapIgmpSnpgMcacLagPortsDown OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLagPortsDown indicates the configured number of ports in a lag group that are down. If the number of ports available in the lag is reduced by the number of ports configured for msapIgmpSnpgMcacLagPortsDown object then bandwidth allowed for bundle will be updated to the value of msapIgmpSnpgMcacLevelBW indexed by msapIgmpSnpgMcacLagLevel value." ::= { msapIgmpSnpgMcacLagEntry 1 } msapIgmpSnpgMcacLagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLagRowStatus is used for creation and deletion of lag constraint in a CAC policy." ::= { msapIgmpSnpgMcacLagEntry 2 } msapIgmpSnpgMcacLagLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLagLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { msapIgmpSnpgMcacLagEntry 3 } msapIgmpSnpgMcacLagLevel OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLagLevel specifies the level id to use when the value of msapIgmpSnpgMcacLagPortsDown matches the actual number of ports down in a lag. Using the value of msapIgmpSnpgMcacLagLevel as an index, the operational MSAP unconstrained bandwidth will be set to msapIgmpSnpgMcacLevelBW. By default, for all lag constraints the link level will be set to 1 at row creation." DEFVAL { 1 } ::= { msapIgmpSnpgMcacLagEntry 4 } msapInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Managed SAP information." ::= { tmnxSapObjs 48 } msapInfoEntry OBJECT-TYPE SYNTAX MsapInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific Managed SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { msapInfoTable 1 } MsapInfoEntry ::= SEQUENCE { msapInfoCreationSapPortEncapVal TmnxEncapVal, msapInfoCreationPlcyName TNamedItem, msapInfoReEvalPolicy TmnxActionType, msapInfoLastChanged TimeStamp, msapInfoIsIdle TruthValue, msapInfoIsSticky TruthValue, msapInfoStickyExpiryTime DateAndTimeOrEmpty } msapInfoCreationSapPortEncapVal OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapInfoCreationSapPortEncapVal indicates the port encapsulation value of the SAP with a sapSubType value of 'capture' that created this MSAP." ::= { msapInfoEntry 1 } msapInfoCreationPlcyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapInfoCreationPlcyName indicates the value of the msapPlcyName object for MSAP policy used to create this MSAP." ::= { msapInfoEntry 2 } msapInfoReEvalPolicy OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of msapInfoReEvalPolicy specifies whether to reapply the Managed SAP policy associated with this MSAP. When a SET of this object is done with a value of 'doAction', the system will attempt to reapply the MSAP policy indicated by msapInfoCreationPlcyName. If this action is successful, 'noError' will be returned. If this action is unsuccessful, an 'inconsistentValue' error will be returned. Attempting to SET this object with a value of 'notApplicable' will have no effect and will return 'noError'. SNMP GET and GETNEXT requests on this object will return 'notApplicable'." DEFVAL { notApplicable } ::= { msapInfoEntry 3 } msapInfoLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapInfoLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { msapInfoEntry 4 } msapInfoIsIdle OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapInfoIsIdle indicates if this managed SAP is 'idle', meaning that there are no hosts associated with this managed SAP." ::= { msapInfoEntry 5 } msapInfoIsSticky OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapInfoIsSticky indicates if this managed SAP is 'sticky'. The system will remove a 'sticky' managed SAP only upon explicit request of a management client." ::= { msapInfoEntry 6 } msapInfoStickyExpiryTime OBJECT-TYPE SYNTAX DateAndTimeOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapInfoStickyExpiryTime indicates when this sticky managed SAP will be removed." ::= { msapInfoEntry 7 } msapCaptureSapStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapCaptureSapStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains statistics for SAPs with a sapSubType value of 'capture'." ::= { tmnxSapObjs 49 } msapCaptureSapStatsEntry OBJECT-TYPE SYNTAX MsapCaptureSapStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for a specific 'capture' SAP." INDEX { svcId, sapPortId, sapEncapValue, msapCaptureSapStatsTriggerType } ::= { msapCaptureSapStatsTable 1 } MsapCaptureSapStatsEntry ::= SEQUENCE { msapCaptureSapStatsTriggerType INTEGER, msapCaptureSapStatsPktsRecvd Counter32, msapCaptureSapStatsPktsRedirect Counter32, msapCaptureSapStatsPktsDropped Counter32 } msapCaptureSapStatsTriggerType OBJECT-TYPE SYNTAX INTEGER { dhcp (1), pppoe (2), arp (3), dhcp6 (4), ppp (5), rtrsol (6), data (7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of msapCaptureSapStatsTriggerType indicates the type of trigger packets this entry is for." ::= { msapCaptureSapStatsEntry 1 } msapCaptureSapStatsPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapCaptureSapStatsPktsRecvd indicates the number of packets received on this 'capture' SAP." ::= { msapCaptureSapStatsEntry 2 } msapCaptureSapStatsPktsRedirect OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapCaptureSapStatsPktsRedirect indicates the number of packets redirected on this 'capture' SAP." ::= { msapCaptureSapStatsEntry 3 } msapCaptureSapStatsPktsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapCaptureSapStatsPktsDropped indicates the number of packets dropped on this 'capture' SAP." ::= { msapCaptureSapStatsEntry 4 } sapTlsMrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsMrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapTlsMrpTable augments sapTlsInfoTable with attributes of the Multiple Registration Protocol (MRP) feature for the TLS SAP." ::= { tmnxSapObjs 50 } sapTlsMrpEntry OBJECT-TYPE SYNTAX SapTlsMrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MRP specific information about a SAP in a TLS." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTlsMrpTable 1 } SapTlsMrpEntry ::= SEQUENCE { sapTlsMrpRxPdus Counter32, sapTlsMrpDroppedPdus Counter32, sapTlsMrpTxPdus Counter32, sapTlsMrpRxNewEvent Counter32, sapTlsMrpRxJoinInEvent Counter32, sapTlsMrpRxInEvent Counter32, sapTlsMrpRxJoinEmptyEvent Counter32, sapTlsMrpRxEmptyEvent Counter32, sapTlsMrpRxLeaveEvent Counter32, sapTlsMrpTxNewEvent Counter32, sapTlsMrpTxJoinInEvent Counter32, sapTlsMrpTxInEvent Counter32, sapTlsMrpTxJoinEmptyEvent Counter32, sapTlsMrpTxEmptyEvent Counter32, sapTlsMrpTxLeaveEvent Counter32 } sapTlsMrpRxPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpRxPdus indicates the number of MRP packets received on this SAP." ::= { sapTlsMrpEntry 1 } sapTlsMrpDroppedPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpDroppedPdus indicates the number of dropped MRP packets on this SAP." ::= { sapTlsMrpEntry 2 } sapTlsMrpTxPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpTxPdus indicates the number of MRP packets transmitted on this SAP." ::= { sapTlsMrpEntry 3 } sapTlsMrpRxNewEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP events received on this SAP." ::= { sapTlsMrpEntry 4 } sapTlsMrpRxJoinInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In' MRP events received on this SAP." ::= { sapTlsMrpEntry 5 } sapTlsMrpRxInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpRxInEvent indicates the number of 'In' MRP events received on this SAP." ::= { sapTlsMrpEntry 6 } sapTlsMrpRxJoinEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpRxJoinEmptyEvent indicates the number of 'Join Empty' MRP events received on this SAP." ::= { sapTlsMrpEntry 7 } sapTlsMrpRxEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP events received on this SAP." ::= { sapTlsMrpEntry 8 } sapTlsMrpRxLeaveEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP events received on this SAP." ::= { sapTlsMrpEntry 9 } sapTlsMrpTxNewEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP events transmitted on this SAP." ::= { sapTlsMrpEntry 10 } sapTlsMrpTxJoinInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In' MRP events transmitted on this SAP." ::= { sapTlsMrpEntry 11 } sapTlsMrpTxInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpTxInEvent indicates the number of 'In' MRP events transmitted on this SAP." ::= { sapTlsMrpEntry 12 } sapTlsMrpTxJoinEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpTxJoinEmptyEvent indicates the number of 'Join Empty' MRP events transmitted on this SAP." ::= { sapTlsMrpEntry 13 } sapTlsMrpTxEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP events transmitted on this SAP." ::= { sapTlsMrpEntry 14 } sapTlsMrpTxLeaveEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP events transmitted on this SAP." ::= { sapTlsMrpEntry 15 } sapTlsMmrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsMmrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each MAC address managed by Multiple MAC Registration Protocol (MMRP) on the SAP for the TLS. Entries are dynamically created and destroyed by the system as the MAC Addresses are registered or declared in MMRP." ::= { tmnxSapObjs 51 } sapTlsMmrpEntry OBJECT-TYPE SYNTAX SapTlsMmrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MMRP specific information about a MAC address managed by MMRP on a SAP in a TLS." INDEX { svcId, sapPortId, sapEncapValue, sapTlsMmrpMacAddr } ::= { sapTlsMmrpTable 1 } SapTlsMmrpEntry ::= SEQUENCE { sapTlsMmrpMacAddr MacAddress, sapTlsMmrpDeclared TruthValue, sapTlsMmrpRegistered TruthValue, sapTlsMmrpEndStation TruthValue } sapTlsMmrpMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapTlsMmrpMacAddr indicates an ethernet MAC address which is being managed by MMRP on this SAP." ::= { sapTlsMmrpEntry 1 } sapTlsMmrpDeclared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMmrpDeclared indicates whether the MRP applicant on this SAP is declaring this MAC address on behalf of MMRP." ::= { sapTlsMmrpEntry 2 } sapTlsMmrpRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMmrpRegistered indicates whether the MRP registrant on this SAP has notified MMRP of a registration of this MAC address." ::= { sapTlsMmrpEntry 3 } sapTlsMmrpEndStation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMmrpEndStation indicates whether the MRP registrant on this SAP is registered per end station." ::= { sapTlsMmrpEntry 4 } sapIngQosHsmdaQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosHsmdaQueueEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The sapIngQosHsmdaQueueTable has an entry for each Hsmda SAP-level ingress queue override configured on the system. This table is obsoleted in 10.0 release." ::= { tmnxSapObjs 52 } sapIngQosHsmdaQueueEntry OBJECT-TYPE SYNTAX SapIngQosHsmdaQueueEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry represents a Hsmda SAP-level ingress queue override record. Entries are created and deleted via SNMP SET operations on sapIngQosHsmdaQueueRowStatus." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosHsmdaQueueId } ::= { sapIngQosHsmdaQueueTable 1 } SapIngQosHsmdaQueueEntry ::= SEQUENCE { sapIngQosHsmdaQueueId TIngressHsmdaQueueId, sapIngQosHsmdaQueueRowStatus RowStatus, sapIngQosHsmdaQueueLastChanged TimeStamp, sapIngQosHsmdaQueueAdminPIR THsmdaPIRKRateOverride, sapIngQosHsmdaQueueAdminCIR THsmdaCIRKRateOverride, sapIngQosHsmdaQueueSlopePolicy TNamedItemOrEmpty } sapIngQosHsmdaQueueId OBJECT-TYPE SYNTAX TIngressHsmdaQueueId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of sapIngQosHsmdaQueueId index specifies the Hsmda egress queue which this override record will affect." ::= { sapIngQosHsmdaQueueEntry 1 } sapIngQosHsmdaQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosHsmdaQueueRowStatus specifies..." ::= { sapIngQosHsmdaQueueEntry 2 } sapIngQosHsmdaQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngQosHsmdaQueueLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { sapIngQosHsmdaQueueEntry 3 } sapIngQosHsmdaQueueAdminPIR OBJECT-TYPE SYNTAX THsmdaPIRKRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosHsmdaQueueAdminPIR specifies the PIR rate in kbps allowed for this Hsmda ingress queue." DEFVAL { -2 } ::= { sapIngQosHsmdaQueueEntry 4 } sapIngQosHsmdaQueueAdminCIR OBJECT-TYPE SYNTAX THsmdaCIRKRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosHsmdaQueueAdminCIR specifies the CIR rate in kbps allowed for this Hsmda ingress queue." DEFVAL { -2 } ::= { sapIngQosHsmdaQueueEntry 5 } sapIngQosHsmdaQueueSlopePolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngQosHsmdaQueueSlopePolicy specifies the slope policy that defines the RED slopes for this Hsmda ingress queue." DEFVAL { "" } ::= { sapIngQosHsmdaQueueEntry 6 } sapIngQosHsmdaQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosHsmdaQueueStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains ingress QoS HSMDA queue SAP statistics. This table is obsoleted in 10.0 release." ::= { tmnxSapObjs 53 } sapIngQosHsmdaQueueStatsEntry OBJECT-TYPE SYNTAX SapIngQosHsmdaQueueStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Ingress statistics about a specific SAP's QoS HSMDA queue." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosHsmdaQueueId } ::= { sapIngQosHsmdaQueueStatsTable 1 } SapIngQosHsmdaQueueStatsEntry ::= SEQUENCE { sapIngHsmdaQStatCustId TmnxCustId, sapIngHsmdaQStatHiPktsDropped Counter64, sapIngHsmdaQStatLoPktsDropped Counter64, sapIngHsmdaQStatHiOctsDropped Counter64, sapIngHsmdaQStatLoOctsDropped Counter64, sapIngHsmdaQStatInProfPktsFwd Counter64, sapIngHsmdaQStatOutProfPktsFwd Counter64, sapIngHsmdaQStatInProfOctsFwd Counter64, sapIngHsmdaQStatOutProfOctsFwd Counter64, sapIngHsmdaQStatAllPktsOffered Counter64, sapIngHsmdaQStatAllOctsOffered Counter64 } sapIngHsmdaQStatCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatCustId indicates the customer ID for the statistics." ::= { sapIngQosHsmdaQueueStatsEntry 1 } sapIngHsmdaQStatHiPktsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatHiPktsDropped indicates the number of high priority packets dropped on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 2 } sapIngHsmdaQStatLoPktsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatLoPktsDropped indicates the number of low-priority packets dropped on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 3 } sapIngHsmdaQStatHiOctsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatHiOctsDropped indicates the number of high priority octets dropped on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 4 } sapIngHsmdaQStatLoOctsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatLoOctsDropped indicates the number of low-priority octets dropped on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 5 } sapIngHsmdaQStatInProfPktsFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatInProfPktsFwd indicates the number of in-profile packets forwarded on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 6 } sapIngHsmdaQStatOutProfPktsFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatOutProfPktsFwd indicates the number of out-of-profile packets forwarded on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 7 } sapIngHsmdaQStatInProfOctsFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatInProfOctsFwd indicates the number of out-of-profile packets forwarded on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 8 } sapIngHsmdaQStatOutProfOctsFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatOutProfOctsFwd indicates the number of out-of-profile packets forwarded on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 9 } sapIngHsmdaQStatAllPktsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatAllPktsOffered indicates the total number of packets offered on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 10 } sapIngHsmdaQStatAllOctsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaQStatAllOctsOffered indicates the total number of octets offered on ingress on this SAP." ::= { sapIngQosHsmdaQueueStatsEntry 11 } sapIngQosHsmdaCntrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosHsmdaCntrStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains ingress QoS HSMDA counter SAP statistics. This table is obsoleted in 10.0 release." ::= { tmnxSapObjs 54 } sapIngQosHsmdaCntrStatsEntry OBJECT-TYPE SYNTAX SapIngQosHsmdaCntrStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Ingress statistics about a specific SAP's QoS HSMDA counter." INDEX { svcId, sapPortId, sapEncapValue, sapIngHsmdaCntrStCntrId } ::= { sapIngQosHsmdaCntrStatsTable 1 } SapIngQosHsmdaCntrStatsEntry ::= SEQUENCE { sapIngHsmdaCntrStCntrId TIngressHsmdaCounterId, sapIngHsmdaCntrStCustId TmnxCustId, sapIngHsmdaCntrStHiPktDrop Counter64, sapIngHsmdaCntrStLoPktDrop Counter64, sapIngHsmdaCntrStHiOctDrop Counter64, sapIngHsmdaCntrStLoOctDrop Counter64, sapIngHsmdaCntrStInProfPktFwd Counter64, sapIngHsmdaCntrStOutProfPktFwd Counter64, sapIngHsmdaCntrStInProfOctFwd Counter64, sapIngHsmdaCntrStOutProfOctFwd Counter64, sapIngHsmdaCntrStAllPktOffered Counter64, sapIngHsmdaCntrStAllOctOffered Counter64 } sapIngHsmdaCntrStCntrId OBJECT-TYPE SYNTAX TIngressHsmdaCounterId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStCntrId indicates the counter ID for the statistics." ::= { sapIngQosHsmdaCntrStatsEntry 1 } sapIngHsmdaCntrStCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStCustId indicates the customer ID for the statistics." ::= { sapIngQosHsmdaCntrStatsEntry 2 } sapIngHsmdaCntrStHiPktDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStHiPktDrop indicates the number of high priority packets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 3 } sapIngHsmdaCntrStLoPktDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStLoPktDrop indicates the number of low-priority packets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 4 } sapIngHsmdaCntrStHiOctDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStHiOctDrop indicates the number of high priority octets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 5 } sapIngHsmdaCntrStLoOctDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStLoOctDrop indicates the number of low-priority octets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 6 } sapIngHsmdaCntrStInProfPktFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStInProfPktFwd indicates the number of in-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 7 } sapIngHsmdaCntrStOutProfPktFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStOutProfPktFwd indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 8 } sapIngHsmdaCntrStInProfOctFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStInProfOctFwd indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 9 } sapIngHsmdaCntrStOutProfOctFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStOutProfOctFwd indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 10 } sapIngHsmdaCntrStAllPktOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStAllPktOffered indicates the total number of packets offered on ingress on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 11 } sapIngHsmdaCntrStAllOctOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIngHsmdaCntrStAllOctOffered indicates the total number of octets offered on ingress on this SAP." ::= { sapIngQosHsmdaCntrStatsEntry 12 } sapEgrQosHsmdaQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosHsmdaQueueEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The sapEgrQosHsmdaQueueTable has an entry for each Hsmda SAP-level egress queue override configured on the system." ::= { tmnxSapObjs 55 } sapEgrQosHsmdaQueueEntry OBJECT-TYPE SYNTAX SapEgrQosHsmdaQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Hsmda SAP-level egress queue override record. Entries are created and deleted via SNMP SET operations on sapEgrQosHsmdaQueueRowStatus." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosHsmdaQueueId } ::= { sapEgrQosHsmdaQueueTable 1 } SapEgrQosHsmdaQueueEntry ::= SEQUENCE { sapEgrQosHsmdaQueueId TEgressHsmdaQueueId, sapEgrQosHsmdaQueueRowStatus RowStatus, sapEgrQosHsmdaQueueLastChanged TimeStamp, sapEgrQosHsmdaQueueAdminPIR THsmdaPIRKRateOverride, sapEgrQosHsmdaQueueAdminCIR THsmdaCIRKRateOverride, sapEgrQosHsmdaQueueSlopePolicy TNamedItemOrEmpty, sapEgrQosHsmdaQueueWrrWeight THsmdaWrrWeightOverride, sapEgrQosHsmdaQueueMBS THSMDABurstSizeBytesOverride } sapEgrQosHsmdaQueueId OBJECT-TYPE SYNTAX TEgressHsmdaQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrQosHsmdaQueueId index specifies the Hsmda egress queue which this override record will affect." ::= { sapEgrQosHsmdaQueueEntry 1 } sapEgrQosHsmdaQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosHsmdaQueueRowStatus controls the creation and deletion of rows in this table." ::= { sapEgrQosHsmdaQueueEntry 2 } sapEgrQosHsmdaQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrQosHsmdaQueueLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { sapEgrQosHsmdaQueueEntry 3 } sapEgrQosHsmdaQueueAdminPIR OBJECT-TYPE SYNTAX THsmdaPIRKRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosHsmdaQueueAdminPIR specifies the PIR rate in kbps allowed for this Hsmda ingress queue." DEFVAL { -2 } ::= { sapEgrQosHsmdaQueueEntry 4 } sapEgrQosHsmdaQueueAdminCIR OBJECT-TYPE SYNTAX THsmdaCIRKRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosHsmdaQueueAdminCIR specifies the CIR rate in kbps allowed for this Hsmda ingress queue. This object is obsoleted in 10.0 Release." DEFVAL { -2 } ::= { sapEgrQosHsmdaQueueEntry 5 } sapEgrQosHsmdaQueueSlopePolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosHsmdaQueueSlopePolicy specifies the slope policy that defines the RED slopes for this Hsmda ingress queue." DEFVAL { "" } ::= { sapEgrQosHsmdaQueueEntry 6 } sapEgrQosHsmdaQueueWrrWeight OBJECT-TYPE SYNTAX THsmdaWrrWeightOverride MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosHsmdaQueueWrrWeight specifies the weighted round-robin weight override for the given egress hsmda queue on this SAP. When set to default value, the weighted round-robin weight is not overridden and the weighted round-robin weight from the sap-egress qos policy is honored. When a non-default value is given, that is used instead of the weighted round-robin weight given in the sap-egress policy." DEFVAL { -2 } ::= { sapEgrQosHsmdaQueueEntry 7 } sapEgrQosHsmdaQueueMBS OBJECT-TYPE SYNTAX THSMDABurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrQosHsmdaQueueMBS specifies the maximum buffer space (MBS) override in bytes for the given egress hsmda queue on this SAP. When set to default value, the MBS is not overridden and the MBS from the sap-egress qos policy is honored. When a non-default value is given, that is used instead of the MBS given in the sap-egress policy." DEFVAL { -2 } ::= { sapEgrQosHsmdaQueueEntry 8 } sapEgrQosHsmdaQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosHsmdaQueueStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains egress QoS HSMDA queue SAP statistics." ::= { tmnxSapObjs 56 } sapEgrQosHsmdaQueueStatsEntry OBJECT-TYPE SYNTAX SapEgrQosHsmdaQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific SAP's QoS HSMDA queue." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosHsmdaQueueId } ::= { sapEgrQosHsmdaQueueStatsTable 1 } SapEgrQosHsmdaQueueStatsEntry ::= SEQUENCE { sapEgrHsmdaQStatCustId TmnxCustId, sapEgrHsmdaQStatInProfPktFwd Counter64, sapEgrHsmdaQStatInProfPktDropd Counter64, sapEgrHsmdaQStatOutProfPktFwd Counter64, sapEgrHsmdaQStatOutProfPktDropd Counter64, sapEgrHsmdaQStatInProfOctFwd Counter64, sapEgrHsmdaQStatInProfOctDropd Counter64, sapEgrHsmdaQStatOutProfOctFwd Counter64, sapEgrHsmdaQStatOutProfOctDropd Counter64 } sapEgrHsmdaQStatCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatCustId indicates the customer ID for the statistics." ::= { sapEgrQosHsmdaQueueStatsEntry 1 } sapEgrHsmdaQStatInProfPktFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatInProfPktFwd indicates the number of in-profile packets forwarded on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 2 } sapEgrHsmdaQStatInProfPktDropd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatInProfPktDropd indicates the number of in-profile packets dropped on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 3 } sapEgrHsmdaQStatOutProfPktFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatOutProfPktFwd indicates the number of out-of-profile packets forwarded on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 4 } sapEgrHsmdaQStatOutProfPktDropd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatOutProfPktDropd indicates the number of out-of-profile packets dropped on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 5 } sapEgrHsmdaQStatInProfOctFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatInProfOctFwd indicates the number of out-of-profile packets forwarded on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 6 } sapEgrHsmdaQStatInProfOctDropd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatInProfOctDropd indicates the number of out-of-profile packets dropped on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 7 } sapEgrHsmdaQStatOutProfOctFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatOutProfOctFwd indicates the number of out-of-profile packets forwarded on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 8 } sapEgrHsmdaQStatOutProfOctDropd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaQStatOutProfOctDropd indicates the number of out-of-profile packets dropped on egress on this SAP." ::= { sapEgrQosHsmdaQueueStatsEntry 9 } sapEgrQosHsmdaCntrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosHsmdaCntrStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains egress QoS HSMDA counter SAP statistics." ::= { tmnxSapObjs 57 } sapEgrQosHsmdaCntrStatsEntry OBJECT-TYPE SYNTAX SapEgrQosHsmdaCntrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific SAP's QoS HSMDA counter." INDEX { svcId, sapPortId, sapEncapValue, sapEgrHsmdaCntrStCntrId } ::= { sapEgrQosHsmdaCntrStatsTable 1 } SapEgrQosHsmdaCntrStatsEntry ::= SEQUENCE { sapEgrHsmdaCntrStCntrId TEgressHsmdaCounterId, sapEgrHsmdaCntrStCustId TmnxCustId, sapEgrHsmdaCntrStInProfPktFwd Counter64, sapEgrHsmdaCntrStInProfPktDrop Counter64, sapEgrHsmdaCntrStOutProfPktFwd Counter64, sapEgrHsmdaCntrStOutProfPktDrop Counter64, sapEgrHsmdaCntrStInProfOctFwd Counter64, sapEgrHsmdaCntrStInProfOctDrop Counter64, sapEgrHsmdaCntrStOutProfOctFwd Counter64, sapEgrHsmdaCntrStOutProfOctDrop Counter64 } sapEgrHsmdaCntrStCntrId OBJECT-TYPE SYNTAX TEgressHsmdaCounterId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStCntrId indicates the counter ID for the statistics." ::= { sapEgrQosHsmdaCntrStatsEntry 1 } sapEgrHsmdaCntrStCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStCustId indicates the customer ID for the statistics." ::= { sapEgrQosHsmdaCntrStatsEntry 2 } sapEgrHsmdaCntrStInProfPktFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStInProfPktFwd indicates the number of in-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 3 } sapEgrHsmdaCntrStInProfPktDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStInProfPktDrop indicates the number of in-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 4 } sapEgrHsmdaCntrStOutProfPktFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStOutProfPktFwd indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 5 } sapEgrHsmdaCntrStOutProfPktDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStOutProfPktDrop indicates the number of out-of-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 6 } sapEgrHsmdaCntrStInProfOctFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStInProfOctFwd indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 7 } sapEgrHsmdaCntrStInProfOctDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStInProfOctDrop indicates the number of out-of-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 8 } sapEgrHsmdaCntrStOutProfOctFwd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStOutProfOctFwd indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 9 } sapEgrHsmdaCntrStOutProfOctDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgrHsmdaCntrStOutProfOctDrop indicates the number of out-of-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP." ::= { sapEgrQosHsmdaCntrStatsEntry 10 } msapL3PlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapL3PlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The msapL3PlcyTable has an entry for each managed SAP (MSAP) policy configured in the system." ::= { tmnxSapObjs 58 } msapL3PlcyEntry OBJECT-TYPE SYNTAX MsapL3PlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the L3-related configuration for a managed SAP (MSAP) policy." AUGMENTS { msapPlcyEntry } ::= { msapL3PlcyTable 1 } MsapL3PlcyEntry ::= SEQUENCE { msapL3PlcyLastChanged TimeStamp, msapL3PlcyAntiSpoof INTEGER, msapL3PlcyIngQosPolicyId TSapIngressPolicyID, msapL3PlcyIngQosQueueingType INTEGER, msapL3PlcyEgrQosPolicyId TSapEgressPolicyID } msapL3PlcyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapL3PlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { msapL3PlcyEntry 1 } msapL3PlcyAntiSpoof OBJECT-TYPE SYNTAX INTEGER { sourceIpAndMacAddr (3), nextHopIpAndMacAddr (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object msapL3PlcyAntiSpoof specifies the type of anti-spoof filtering applicable on this MSAP." DEFVAL { sourceIpAndMacAddr } ::= { msapL3PlcyEntry 2 } msapL3PlcyIngQosPolicyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapL3PlcyIngQosPolicyId specifies the ingress QoS policy applicable to this MSAP policy in IES/VPRN (L3) services. The corresponding policy is defined in TIMETRA-QOS-MIB::tSapIngressTable." DEFVAL { 1 } ::= { msapL3PlcyEntry 3 } msapL3PlcyIngQosQueueingType OBJECT-TYPE SYNTAX INTEGER { sharedQueueing (1), serviceQueueing (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapL3PlcyIngQosQueueingType specifies the ingress queueing type applicable to this MSAP policy in IES/VPRN (L3) services." DEFVAL { sharedQueueing } ::= { msapL3PlcyEntry 4 } msapL3PlcyEgrQosPolicyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapL3PlcyEgrQosPolicyId specifies the egress QoS policy applicable to this MSAP policy in IES/VPRN (L3) services. The value must correspond to a conceptual row in the TIMETRA-QOS-MIB::tSapEgressTable." DEFVAL { 1 } ::= { msapL3PlcyEntry 5 } msapPlcyTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 59 } msapTlsPlcyTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapTlsPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapTlsPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 60 } msapIgmpSnpgMcacLvlTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLvlTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLevelTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 61 } msapIgmpSnpgMcacLagTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapIgmpSnpgMcacLagTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLagTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 62 } msapInfoTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapInfoTblLastChgd indicates the sysUpTime at the time of the last modification of msapInfoTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 63 } msapL3PlcyTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapL3PlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapL3PlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 64 } sapStaticHostMRtTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStaticHostMRtTblLastChgd indicates the sysUpTime at the time of the last modification of sapStaticHostMRtTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, this object contains a zero value." ::= { tmnxSapObjs 65 } sapStaticHostMRtTable OBJECT-TYPE SYNTAX SEQUENCE OF SapStaticHostMRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapStaticHostMRtTable contains managed routes of SAP static hosts. Entries can be created and deleted via SNMP SET operations." ::= { tmnxSapObjs 66 } sapStaticHostMRtEntry OBJECT-TYPE SYNTAX SapStaticHostMRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information on a specific managed route." INDEX { svcId, sapPortId, sapEncapValue, sapStaticHostIpAddress, sapStaticHostMacAddress, sapStaticHostMRtAddrType, sapStaticHostMRtAddr, sapStaticHostMRtPrefixLen } ::= { sapStaticHostMRtTable 1 } SapStaticHostMRtEntry ::= SEQUENCE { sapStaticHostMRtAddrType InetAddressType, sapStaticHostMRtAddr InetAddress, sapStaticHostMRtPrefixLen InetAddressPrefixLength, sapStaticHostMRtRowStatus RowStatus, sapStaticHostMRtLastMgmtChange TimeStamp, sapStaticHostMRtStatus TmnxManagedRouteStatus, sapStaticHostMRtMetric Unsigned32, sapStaticHostMRtPreference Unsigned32, sapStaticHostMRtTag Unsigned32 } sapStaticHostMRtAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapStaticHostMRtAddrType indicates the address type of sapStaticHostMRtAddr." ::= { sapStaticHostMRtEntry 1 } sapStaticHostMRtAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapStaticHostMRtAddr indicates the IP address of the managed route." ::= { sapStaticHostMRtEntry 2 } sapStaticHostMRtPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapStaticHostMRtPrefixLen indicates the prefix length of the subnet associated with sapStaticHostMRtAddr." ::= { sapStaticHostMRtEntry 3 } sapStaticHostMRtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostMRtRowStatus controls the creation and deletion of rows in this table." ::= { sapStaticHostMRtEntry 4 } sapStaticHostMRtLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStaticHostMRtLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row." ::= { sapStaticHostMRtEntry 5 } sapStaticHostMRtStatus OBJECT-TYPE SYNTAX TmnxManagedRouteStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStaticHostMRtStatus indicates the state of this managed route." ::= { sapStaticHostMRtEntry 6 } sapStaticHostMRtMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostMRtMetric specifies the route metric. The value of the metric is compared with the metric of other routes with the same preference." DEFVAL { 0 } ::= { sapStaticHostMRtEntry 7 } sapStaticHostMRtPreference OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostMRtPreference specifies the route preference. The value of the preference is compared with the preference of the routes coming from routing protocols." DEFVAL { 0 } ::= { sapStaticHostMRtEntry 8 } sapStaticHostMRtTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStaticHostMRtTag specifies the route tag." DEFVAL { 0 } ::= { sapStaticHostMRtEntry 9 } sapTlsArpHostTableLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsArpHostTableLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to the sapTlsArpHostTable." ::= { tmnxSapObjs 67 } sapTlsArpHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsArpHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ARP host configuration information about a SAP in a TLS." ::= { tmnxSapObjs 68 } sapTlsArpHostEntry OBJECT-TYPE SYNTAX SapTlsArpHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ARP host specific information about a SAP in a TLS." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTlsArpHostTable 1 } SapTlsArpHostEntry ::= SEQUENCE { sapTlsArpHostLastMgmtChange TimeStamp, sapTlsArpHostAdminState TmnxAdminState, sapTlsArpHostMaxNumHosts Unsigned32, sapTlsArpHostMinAuthIntvl Unsigned32 } sapTlsArpHostLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsArpHostLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { sapTlsArpHostEntry 1 } sapTlsArpHostAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsArpHostAdminState specifies the administrative state of the ARP host functionality on this TLS SAP." DEFVAL { outOfService } ::= { sapTlsArpHostEntry 2 } sapTlsArpHostMaxNumHosts OBJECT-TYPE SYNTAX Unsigned32 (1..131071) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsArpHostMaxNumHosts specifies the maximum number of ARP hosts allowed on this TLS SAP." DEFVAL { 1 } ::= { sapTlsArpHostEntry 3 } sapTlsArpHostMinAuthIntvl OBJECT-TYPE SYNTAX Unsigned32 (1..6000) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsArpHostMinAuthIntvl specifies the minimum interval between two consecutive authentication attempts for the same ARP host." DEFVAL { 15 } ::= { sapTlsArpHostEntry 4 } sapIgmpTrkTableLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIgmpTrkTableLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to the sapIgmpTrkTable." ::= { tmnxSapObjs 69 } sapIgmpTrkTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIgmpTrkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains IGMP host tracking configuration information about SAPs. The system automatically creates an entry in this table for each SAP where it creates a corresponding entry in the sapSubMgmtInfoTable. This means that all SAPs that support Enhanced Subscriber Management have en entry in this table." ::= { tmnxSapObjs 70 } sapIgmpTrkEntry OBJECT-TYPE SYNTAX SapIgmpTrkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP host tracking specific information about a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapIgmpTrkTable 1 } SapIgmpTrkEntry ::= SEQUENCE { sapIgmpTrkLastMgmtChange TimeStamp, sapIgmpTrkExpiryTime Unsigned32, sapIgmpTrkImportPlcy TPolicyStatementNameOrEmpty, sapIgmpTrkMaxNbrGrps Unsigned32, sapIgmpTrkNbrGrps Gauge32, sapIgmpTrkMaxNbrSrcs Unsigned32, sapIgmpTrkDisRtrAlertChk TruthValue, sapIgmpTrkMaxNbrGrpSrcs Unsigned32 } sapIgmpTrkLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIgmpTrkLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { sapIgmpTrkEntry 1 } sapIgmpTrkExpiryTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapIgmpTrkExpiryTime specifies the time in seconds that this system continues to track an inactive host. The value zero specifies that the value must be set to the actual value of the object svcIgmpTrkExpiryTime of the service this SAP belongs to." DEFVAL { 0 } ::= { sapIgmpTrkEntry 2 } sapIgmpTrkImportPlcy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapIgmpTrkImportPlcy specifies the policy statement that must be applied to all incoming IGMP messages on this SAP." DEFVAL { "" } ::= { sapIgmpTrkEntry 3 } sapIgmpTrkMaxNbrGrps OBJECT-TYPE SYNTAX Unsigned32 (0..16000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapIgmpTrkMaxNbrGrps specifies how many group addresses are allowed for this SAP. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { sapIgmpTrkEntry 4 } sapIgmpTrkNbrGrps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIgmpTrkNbrGrps indicates how many group addresses are tracked for this SAP." ::= { sapIgmpTrkEntry 5 } sapIgmpTrkMaxNbrSrcs OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapIgmpTrkMaxNbrSrcs specifies how many source addresses are allowed per group address for this SAP. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { sapIgmpTrkEntry 6 } sapIgmpTrkDisRtrAlertChk OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "sapIgmpTrkDisRtrAlertChk is used to enable/disable router alert checking for IGMP messages received on this sap. If this flag is set to 'true', checking is disabled." DEFVAL { false } ::= { sapIgmpTrkEntry 7 } sapIgmpTrkMaxNbrGrpSrcs OBJECT-TYPE SYNTAX Unsigned32 (0..32000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapIgmpTrkMaxNbrGrpSrcs specifies how many group source addresses are allowed per group address for this SAP. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { sapIgmpTrkEntry 8 } sapFrInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapFrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains FR SAP information." ::= { tmnxSapObjs 71 } sapFrInfoEntry OBJECT-TYPE SYNTAX SapFrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific FR SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapFrInfoTable 1 } SapFrInfoEntry ::= SEQUENCE { sapFrInfoFrf12Mode TmnxEnabledDisabled, sapFrInfoSchedulingClass TmnxMcFrClassIndex, sapFrInfoLastChanged TimeStamp } sapFrInfoFrf12Mode OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapFrInfoFrf12Mode enables or disables the use of FRF12 headers. This must be set to disabled for this entry to be added to a mlfr bundle." DEFVAL { disabled } ::= { sapFrInfoEntry 1 } sapFrInfoSchedulingClass OBJECT-TYPE SYNTAX TmnxMcFrClassIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapFrInfoSchedulingClass specifies the scheduling class to use for this sap. This object is only applicable for a sapPortId that has tmnxBundleType set to 'mlfr', sapFrInfoFrf12Mode SAPs set to 'enabled' or tmnxFrIntfFrf12Mode set to 'enabled' and sapFrf12InfoInterleave set to 'disabled'." DEFVAL { 3 } ::= { sapFrInfoEntry 2 } sapFrInfoLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapFrInfoLastChanged indicates the sysUpTime at the time of the last modification of this entry." ::= { sapFrInfoEntry 3 } sapFrf12InfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapFrf12InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains FRF12 SAP information." ::= { tmnxSapObjs 74 } sapFrf12InfoEntry OBJECT-TYPE SYNTAX SapFrf12InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific FR SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapFrf12InfoTable 1 } SapFrf12InfoEntry ::= SEQUENCE { sapFrf12InfoFragmentThreshold Unsigned32, sapFrf12InfoLastChanged TimeStamp, sapFrf12InfoInterleave TmnxEnabledDisabled } sapFrf12InfoFragmentThreshold OBJECT-TYPE SYNTAX Unsigned32 (128..512) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapFrf12InfoFragmentThreshold specifies the maximum length of a fragment to be transmitted." DEFVAL { 128 } ::= { sapFrf12InfoEntry 1 } sapFrf12InfoLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapFrf12InfoLastChanged indicates the sysUpTime at the time of the last modification of this entry.." ::= { sapFrf12InfoEntry 2 } sapFrf12InfoInterleave OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapFrf12InfoInterleave specifies whether or not FRF12 interleave is enabled. If enabled, sapFrInfoSchedulingClass is not applicable." DEFVAL { disabled } ::= { sapFrf12InfoEntry 3 } sapArpHostStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SapArpHostStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ARP host status and statistics information about SAPs." ::= { tmnxSapObjs 75 } sapArpHostStatEntry OBJECT-TYPE SYNTAX SapArpHostStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ARP host specific status and statistics information about a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapArpHostStatTable 1 } SapArpHostStatEntry ::= SEQUENCE { sapArpHostStatLastClearedTime TimeStamp, sapArpHostStatNumHosts Gauge32, sapArpHostStatTriggersRx Counter32, sapArpHostStatTriggersIgnored Counter32, sapArpHostStatTrigIgnQFull Counter32, sapArpHostStatNumForcedVerif Counter32, sapArpHostStatNumCreated Counter32, sapArpHostStatNumDeleted Counter32, sapArpHostStatNumUpdated Counter32, sapArpHostStatNumAuthReq Counter32 } sapArpHostStatLastClearedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet." ::= { sapArpHostStatEntry 1 } sapArpHostStatNumHosts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatNumHosts indicates the actual number of ARP hosts on this SAP." ::= { sapArpHostStatEntry 2 } sapArpHostStatTriggersRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatTriggersRx indicates the number of ARP triggers received on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { sapArpHostStatEntry 3 } sapArpHostStatTriggersIgnored OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatTriggersIgnored indicates the number of ARP triggers received on this SAP that did not result in the creation of a new ARP host since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared. This number does not include the number indicated by sapArpHostStatTrigIgnQFull." ::= { sapArpHostStatEntry 4 } sapArpHostStatTrigIgnQFull OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatTrigIgnQFull indicates the number of ARP triggers received on this SAP that did not result in the creation of a new ARP host because the internal ARP trigger event queue of the system was full, since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { sapArpHostStatEntry 5 } sapArpHostStatNumForcedVerif OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatNumForcedVerif indicates the number of times that the system started a forced subscriber host connectivity verification for an ARP host on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { sapArpHostStatEntry 6 } sapArpHostStatNumCreated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatNumCreated indicates the number of times that an ARP host was created on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { sapArpHostStatEntry 7 } sapArpHostStatNumDeleted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatNumDeleted indicates the number of times that an ARP host was deleted on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { sapArpHostStatEntry 8 } sapArpHostStatNumUpdated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatNumUpdated indicates the number of times that an ARP host was updated on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { sapArpHostStatEntry 9 } sapArpHostStatNumAuthReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapArpHostStatNumAuthReq indicates the number of times that the system initiated an authentication request for an ARP host on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { sapArpHostStatEntry 10 } sapPbbTable OBJECT-TYPE SYNTAX SEQUENCE OF SapPbbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Provider Backbone Bridging (PBB/IEEE 802.1ah) SAP information." ::= { tmnxSapObjs 76 } sapPbbEntry OBJECT-TYPE SYNTAX SapPbbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PBB I-Component instance-specific information about a specific SAP in the B-Component instance. Entries in this table can be created or deleted via SNMP operations." INDEX { sapPbbSvcIdIVpls, sapPbbSvcIdBVpls, sapPbbPortId, sapPbbEncapValue } ::= { sapPbbTable 1 } SapPbbEntry ::= SEQUENCE { sapPbbSvcIdIVpls TmnxServId, sapPbbSvcIdBVpls TmnxServId, sapPbbPortId TmnxPortID, sapPbbEncapValue TmnxEncapVal, sapPbbRowStatus RowStatus, sapPbbLastMgmtChange TimeStamp, sapPbbIgmpSnpgMRouter TruthValue, sapPbbMldSnpgMRouter TruthValue } sapPbbSvcIdIVpls OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapPbbSvcIdIVpls specifies the Service identifier of the I-Component instance." ::= { sapPbbEntry 1 } sapPbbSvcIdBVpls OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapPbbSvcIdBVpls specifies the Service identifier of the B-Component instance." ::= { sapPbbEntry 2 } sapPbbPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapPbbPortId specifies the ID of the access port in the B-Component instance where this SAP is defined." ::= { sapPbbEntry 3 } sapPbbEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapPbbEncapValue specifies the value of the label used to identify this SAP in the B-Component instance on the access port specified by sapPortId." ::= { sapPbbEntry 4 } sapPbbRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapPbbRowStatus specifies the row status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'." ::= { sapPbbEntry 5 } sapPbbLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPbbLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { sapPbbEntry 6 } sapPbbIgmpSnpgMRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapPbbIgmpSnpgMRouter specifies if a multicast router is attached behind this SAP." DEFVAL { false } ::= { sapPbbEntry 7 } sapPbbMldSnpgMRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapPbbMldSnpgMRouter specifies if a multicast router is attached behind this SAP." DEFVAL { false } ::= { sapPbbEntry 8 } sapFPropBMacAddrTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapFPropBMacAddrTblLastChgd indicates the sysUpTime of the last modification of sapFPropBMacAddrTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains a zero value." ::= { tmnxSapObjs 77 } sapFPropBMacAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SapFPropBMacAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sapFPropBMacAddrTable contains the optional configured backbone MAC (BMac) addresses (or MAC names) for each SAP. This table extends the information in sapBaseInfoTable." ::= { tmnxSapObjs 78 } sapFPropBMacAddrEntry OBJECT-TYPE SYNTAX SapFPropBMacAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sapFPropBMacAddrEntry defines a row in the sapFPropBMacAddrTable. The first three index objects reside in sapBaseInfoTable. Rows are created and destroyed using sapFPropBMacAddrRowStatus." INDEX { svcId, sapPortId, sapEncapValue, sapFPropBMacAddrMacNameOrAddrTag, sapFPropBMacAddrMacNameOrAddr } ::= { sapFPropBMacAddrTable 1 } SapFPropBMacAddrEntry ::= SEQUENCE { sapFPropBMacAddrMacNameOrAddrTag INTEGER, sapFPropBMacAddrMacNameOrAddr TNamedItem, sapFPropBMacAddrRowStatus RowStatus } sapFPropBMacAddrMacNameOrAddrTag OBJECT-TYPE SYNTAX INTEGER { macName (1), macAddr (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapFPropBMacAddrMacNameOrAddrTag specifies whether sapFPropBMacAddrMacNameOrAddr contains a MAC name, or a MAC address." ::= { sapFPropBMacAddrEntry 1 } sapFPropBMacAddrMacNameOrAddr OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapFPropBMacAddrMacNameOrAddr specifies a MAC name or MAC address configured against a index triple. When sapFPropBMacAddrMacNameOrAddrTag is 'macName (1)', sapFPropBMacAddrMacNameOrAddr must contain a MAC name which is present in the svcMacName column of the svcMacNameTable. When sapFPropBMacAddrMacNameOrAddrTag is 'macAddr (2)', sapFPropBMacAddrMacNameOrAddr must contain a MAC address, encoded in network byte order and IEEE 802.3 canonical bit order as defined in IEEE Std 802-2001. All the MAC addresses configured for a particular SAP (whether configured as MAC addresses, or via MAC names) must refer to one B-VPLS on the remote system." ::= { sapFPropBMacAddrEntry 2 } sapFPropBMacAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapFPropBMacAddrRowStatus specifies the status of this row." ::= { sapFPropBMacAddrEntry 3 } sapIpv6HostInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIpv6HostInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sapIpv6HostInfoTable contains IPv6 information related to a routed CO subscriber SAP. This table complements sapBaseInfoTable, and contains an entry for each routed CO subscriber SAP. Rows in this table are created and deleted automatically by the system." ::= { tmnxSapObjs 79 } sapIpv6HostInfoEntry OBJECT-TYPE SYNTAX SapIpv6HostInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 specific information for a routed CO subscriber SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapIpv6HostInfoTable 1 } SapIpv6HostInfoEntry ::= SEQUENCE { sapIpv6HostInfoIpoeDhcp6Hosts Unsigned32, sapIpv6HostInfoPppDhcp6Hosts Unsigned32, sapIpv6HostInfoPppSLAACHosts Unsigned32, sapIpv6HostInfoIpoeSLAACHosts Unsigned32, sapIpv6HostInfoStaticHostsUp Unsigned32 } sapIpv6HostInfoIpoeDhcp6Hosts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpv6HostInfoIpoeDhcp6Hosts indicates the number of IPoE DHCPv6 hosts for this SAP." ::= { sapIpv6HostInfoEntry 1 } sapIpv6HostInfoPppDhcp6Hosts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpv6HostInfoPppDhcp6Hosts indicates the number of PPP DHCPv6 hosts for this SAP." ::= { sapIpv6HostInfoEntry 2 } sapIpv6HostInfoPppSLAACHosts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpv6HostInfoPppSLAACHosts indicates the number of PPP SLAAC hosts for this SAP." ::= { sapIpv6HostInfoEntry 3 } sapIpv6HostInfoIpoeSLAACHosts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpv6HostInfoIpoeSLAACHosts indicates the number of IPoE SLAAC hosts for this SAP." ::= { sapIpv6HostInfoEntry 4 } sapIpv6HostInfoStaticHostsUp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapIpv6HostInfoStaticHostsUp indicates the number of IPv6 static IPoE hosts for this SAP where the value of sapStatHost6AdminStatus is equal to 'up'." ::= { sapIpv6HostInfoEntry 5 } sapIngPlcrCtrlOvrTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapIngPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to the sapIngPlcrCtrlOvrTable." ::= { tmnxSapObjs 80 } sapIngPlcrCtrlOvrTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngPlcrCtrlOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP ingress policer control override information." ::= { tmnxSapObjs 81 } sapIngPlcrCtrlOvrEntry OBJECT-TYPE SYNTAX SapIngPlcrCtrlOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policer control override information about a specific SAP on the ingress side." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapIngPlcrCtrlOvrTable 1 } SapIngPlcrCtrlOvrEntry ::= SEQUENCE { sapIngPlcrCtrlOvrRowStatus RowStatus, sapIngPlcrCtrlOvrLastChgd TimeStamp, sapIngPlcrCtrlOvrMaxRate THPolPIRRateOverride, sapIngPlcrCtrlOvrMinMBSSep TPlcrBurstSizeBytesOverride, sapIngPlcrCtrlOvrMaxRateHi TmnxQosRateHigh32, sapIngPlcrCtrlOvrMaxRateLo TmnxQosRateLow32 } sapIngPlcrCtrlOvrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table." ::= { sapIngPlcrCtrlOvrEntry 1 } sapIngPlcrCtrlOvrLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngPlcrCtrlOvrLastChgd indicates the timestamp of last change to this row in sapIngPlcrCtrlOvrTable." ::= { sapIngPlcrCtrlOvrEntry 2 } sapIngPlcrCtrlOvrMaxRate OBJECT-TYPE SYNTAX THPolPIRRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapIngPlcrCtrlOvrMaxRate specifies the maximum frame based bandwidth limit of this policer override. This object is obsoleted in 15.0 release and has been replaced with sapIngPlcrCtrlOvrMaxRateHi and sapIngPlcrCtrlOvrMaxRateLo objects." DEFVAL { -2 } ::= { sapIngPlcrCtrlOvrEntry 3 } sapIngPlcrCtrlOvrMinMBSSep OBJECT-TYPE SYNTAX TPlcrBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrCtrlOvrMinMBSSep specifies the minimum amount of separation buffer space (in bytes) allowed by this policer override." DEFVAL { -2 } ::= { sapIngPlcrCtrlOvrEntry 4 } sapIngPlcrCtrlOvrMaxRateHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrCtrlOvrMaxRateHi specifies the upper 32 bits of the desired frame based bandwidth limit of this policer override. This value should always be set along with sapIngPlcrCtrlOvrMaxRateLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngPlcrCtrlOvrMaxRateHi along with the value of sapIngPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapIngPlcrCtrlOvrMaxRateHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967295 } ::= { sapIngPlcrCtrlOvrEntry 5 } sapIngPlcrCtrlOvrMaxRateLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrCtrlOvrMaxRateLo specifies the lower 32 bits of the desired frame based bandwidth limit of this policer override. This value should always be set along with sapIngPlcrCtrlOvrMaxRateHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngPlcrCtrlOvrMaxRateHi along with the value of sapIngPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapIngPlcrCtrlOvrMaxRateHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967294 } ::= { sapIngPlcrCtrlOvrEntry 6 } sapIngPlcrCtrlOvrLvlTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapIngPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change to the sapIngPlcrCtrlOvrLvlTable." ::= { tmnxSapObjs 82 } sapIngPlcrCtrlOvrLvlTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngPlcrCtrlOvrLvlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP ingress policer control override information for the priority level." ::= { tmnxSapObjs 83 } sapIngPlcrCtrlOvrLvlEntry OBJECT-TYPE SYNTAX SapIngPlcrCtrlOvrLvlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policer control priority level override information about a specific SAP on the ingress side. Entries are created/deleted automatically by the system when entries are created/delete in the sapIngPlcrCtrlOvrTable." INDEX { svcId, sapPortId, sapEncapValue, tQosPolicerLevel } ::= { sapIngPlcrCtrlOvrLvlTable 1 } SapIngPlcrCtrlOvrLvlEntry ::= SEQUENCE { sapIngPlcrCtrlOvrLvlLastChgd TimeStamp, sapIngPlcrCtrlOvrLvlMBS TPlcrBurstSizeBytesOverride } sapIngPlcrCtrlOvrLvlLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngPlcrCtrlOvrLvlLastChgd indicates the timestamp of last change to this row in sapIngPlcrCtrlOvrLvlTable." ::= { sapIngPlcrCtrlOvrLvlEntry 1 } sapIngPlcrCtrlOvrLvlMBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrCtrlOvrLvlMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by the policer of this sap." DEFVAL { -2 } ::= { sapIngPlcrCtrlOvrLvlEntry 2 } sapIngPlcrOvrTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapIngPlcrOvrTblLastChgd indicates the timestamp of last change to the sapIngPlcrOvrTable." ::= { tmnxSapObjs 86 } sapIngPlcrOvrTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngPlcrOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP ingress policer control override information." ::= { tmnxSapObjs 87 } sapIngPlcrOvrEntry OBJECT-TYPE SYNTAX SapIngPlcrOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policer control override information about a specific policer of the SAP on the ingress side." INDEX { svcId, sapPortId, sapEncapValue, tSapIngPolicerId } ::= { sapIngPlcrOvrTable 1 } SapIngPlcrOvrEntry ::= SEQUENCE { sapIngPlcrOvrRowStatus RowStatus, sapIngPlcrOvrLastChgd TimeStamp, sapIngPlcrOvrAdminPIR THPolPIRRateOverride, sapIngPlcrOvrAdminCIR THPolCIRRateOverride, sapIngPlcrOvrStatMode TmnxIngPolicerStatModeOverride, sapIngPlcrOvrMBS TPolicerBurstSizeBytesOverride, sapIngPlcrOvrPktOffset TPerPacketOffsetOvr, sapIngPlcrOvrCBS TPolicerBurstSizeBytesOverride, sapIngPlcrOvrAdminPIRPercent TPIRPercentOverride, sapIngPlcrOvrAdminCIRPercent TCIRPercentOverride, sapIngPlcrOvrAdminPIRHi TmnxQosRateHigh32, sapIngPlcrOvrAdminPIRLo TmnxQosRateLow32, sapIngPlcrOvrAdminCIRHi TmnxQosRateHigh32, sapIngPlcrOvrAdminCIRLo TmnxQosRateLow32 } sapIngPlcrOvrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table." ::= { sapIngPlcrOvrEntry 1 } sapIngPlcrOvrLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngPlcrOvrLastChgd indicates the timestamp of last change to this row in sapIngPlcrOvrTable." ::= { sapIngPlcrOvrEntry 2 } sapIngPlcrOvrAdminPIR OBJECT-TYPE SYNTAX THPolPIRRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "sapIngPlcrOvrAdminPIR specifies the administrative PIR specified by the user. This object is obsoleted on 15.1 release and replaced by sapIngPlcrOvrAdminPIRHi and sapIngPlcrOvrAdminPIRLo." DEFVAL { -2 } ::= { sapIngPlcrOvrEntry 3 } sapIngPlcrOvrAdminCIR OBJECT-TYPE SYNTAX THPolCIRRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "sapIngPlcrOvrAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted on 15.1 release and replaced by sapIngPlcrOvrAdminCIRHi and sapIngPlcrOvrAdminCIRLo." DEFVAL { -2 } ::= { sapIngPlcrOvrEntry 4 } sapIngPlcrOvrStatMode OBJECT-TYPE SYNTAX TmnxIngPolicerStatModeOverride MAX-ACCESS read-create STATUS current DESCRIPTION "sapIngPlcrOvrStatMode specifies the mode of statistics collected by this policer on this sap." DEFVAL { noOverride } ::= { sapIngPlcrOvrEntry 5 } sapIngPlcrOvrMBS OBJECT-TYPE SYNTAX TPolicerBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "sapIngPlcrOvrMBS specifies the maximum amount of buffer space (in bytes) allowed for the queue by this policer on this sap." DEFVAL { -2 } ::= { sapIngPlcrOvrEntry 6 } sapIngPlcrOvrPktOffset OBJECT-TYPE SYNTAX TPerPacketOffsetOvr UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "sapIngPlcrOvrPktOffset specifies the packet byte offset for addition of policing information by this policer on this sap." DEFVAL { -128 } ::= { sapIngPlcrOvrEntry 7 } sapIngPlcrOvrCBS OBJECT-TYPE SYNTAX TPolicerBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "sapIngPlcrOvrCBS specifies the amount of reserved buffer space (in bytes) for the queue set by this policer on this sap." DEFVAL { -2 } ::= { sapIngPlcrOvrEntry 8 } sapIngPlcrOvrAdminPIRPercent OBJECT-TYPE SYNTAX TPIRPercentOverride UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrOvrAdminPIRPercent specifies the desired administrative PIR value for this policer as a percentage." DEFVAL { -2 } ::= { sapIngPlcrOvrEntry 9 } sapIngPlcrOvrAdminCIRPercent OBJECT-TYPE SYNTAX TCIRPercentOverride UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrOvrAdminCIRPercent specifies the desired administrative CIR value for this policer as a percentage." DEFVAL { -2 } ::= { sapIngPlcrOvrEntry 10 } sapIngPlcrOvrAdminPIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrOvrAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with sapIngPlcrOvrAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngPlcrOvrAdminPIRHi along with the value of sapIngPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapIngPlcrOvrAdminPIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminPIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967295 } ::= { sapIngPlcrOvrEntry 11 } sapIngPlcrOvrAdminPIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrOvrAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with sapIngPlcrOvrAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngPlcrOvrAdminPIRHi along with the value of sapIngPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapIngPlcrOvrAdminPIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminPIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967294 } ::= { sapIngPlcrOvrEntry 12 } sapIngPlcrOvrAdminCIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrOvrAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with sapIngPlcrOvrAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngPlcrOvrAdminCIRHi along with the value of sapIngPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapIngPlcrOvrAdminCIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminCIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967295 } ::= { sapIngPlcrOvrEntry 13 } sapIngPlcrOvrAdminCIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngPlcrOvrAdminCIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with sapIngPlcrOvrAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngPlcrOvrAdminCIRHi along with the value of sapIngPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapIngPlcrOvrAdminCIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminCIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967294 } ::= { sapIngPlcrOvrEntry 14 } sapEgrPlcrCtrlOvrTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapEgrPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to the sapEgrPlcrCtrlOvrTable." ::= { tmnxSapObjs 88 } sapEgrPlcrCtrlOvrTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrPlcrCtrlOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP egress policer control override information." ::= { tmnxSapObjs 89 } sapEgrPlcrCtrlOvrEntry OBJECT-TYPE SYNTAX SapEgrPlcrCtrlOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policer control override information about a specific SAP on the egress side." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapEgrPlcrCtrlOvrTable 1 } SapEgrPlcrCtrlOvrEntry ::= SEQUENCE { sapEgrPlcrCtrlOvrRowStatus RowStatus, sapEgrPlcrCtrlOvrLastChgd TimeStamp, sapEgrPlcrCtrlOvrMaxRate THPolPIRRateOverride, sapEgrPlcrCtrlOvrMinMBSSep TPlcrBurstSizeBytesOverride, sapEgrPlcrCtrlOvrMaxRateHi TmnxQosRateHigh32, sapEgrPlcrCtrlOvrMaxRateLo TmnxQosRateLow32 } sapEgrPlcrCtrlOvrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table." ::= { sapEgrPlcrCtrlOvrEntry 1 } sapEgrPlcrCtrlOvrLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrPlcrCtrlOvrLastChgd indicates the timestamp of last change to this row in sapEgrPlcrCtrlOvrTable." ::= { sapEgrPlcrCtrlOvrEntry 2 } sapEgrPlcrCtrlOvrMaxRate OBJECT-TYPE SYNTAX THPolPIRRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of sapEgrPlcrCtrlOvrMaxRate specifies the maximum frame based bandwidth limit of this policer override. This object is obsoleted in 15.0 release and has been replaced with sapEgrPlcrCtrlOvrMaxRateHi and sapEgrPlcrCtrlOvrMaxRateLo objects." DEFVAL { -2 } ::= { sapEgrPlcrCtrlOvrEntry 3 } sapEgrPlcrCtrlOvrMinMBSSep OBJECT-TYPE SYNTAX TPlcrBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrCtrlOvrMinMBSSep specifies the minimum amount of separation buffer space (in bytes) allowed by this policer override." DEFVAL { -2 } ::= { sapEgrPlcrCtrlOvrEntry 4 } sapEgrPlcrCtrlOvrMaxRateHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrCtrlOvrMaxRateHi specifies the upper 32 bits of the desired frame based bandwidth limit of this policer override. This value should always be set along with sapEgrPlcrCtrlOvrMaxRateLo, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrPlcrCtrlOvrMaxRateHi along with the value of sapEgrPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapEgrPlcrCtrlOvrMaxRateHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967295 } ::= { sapEgrPlcrCtrlOvrEntry 5 } sapEgrPlcrCtrlOvrMaxRateLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrCtrlOvrMaxRateLo specifies the lower 32 bits of the desired frame based bandwidth limit of this policer override. This value should always be set along with sapEgrPlcrCtrlOvrMaxRateHi, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrPlcrCtrlOvrMaxRateHi along with the value of sapEgrPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapEgrPlcrCtrlOvrMaxRateHi is set to 4294967295 (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967294 } ::= { sapEgrPlcrCtrlOvrEntry 6 } sapEgrPlcrCtrlOvrLvlTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapEgrPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change to the sapEgrPlcrCtrlOvrLvlTable." ::= { tmnxSapObjs 90 } sapEgrPlcrCtrlOvrLvlTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrPlcrCtrlOvrLvlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP egress policer control override information for the priority level." ::= { tmnxSapObjs 91 } sapEgrPlcrCtrlOvrLvlEntry OBJECT-TYPE SYNTAX SapEgrPlcrCtrlOvrLvlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policer control priority level override information about a specific SAP on the egress side. Entries are created/deleted automatically by the system when entries are created/delete in the sapEgrPlcrCtrlOvrTable." INDEX { svcId, sapPortId, sapEncapValue, tQosPolicerLevel } ::= { sapEgrPlcrCtrlOvrLvlTable 1 } SapEgrPlcrCtrlOvrLvlEntry ::= SEQUENCE { sapEgrPlcrCtrlOvrLvlLastChgd TimeStamp, sapEgrPlcrCtrlOvrLvlMBS TPlcrBurstSizeBytesOverride } sapEgrPlcrCtrlOvrLvlLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrPlcrCtrlOvrLvlLastChgd indicates the timestamp of last change to this row in sapEgrPlcrCtrlOvrLvlTable." ::= { sapEgrPlcrCtrlOvrLvlEntry 1 } sapEgrPlcrCtrlOvrLvlMBS OBJECT-TYPE SYNTAX TPlcrBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrCtrlOvrLvlMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by the policer of this sap." DEFVAL { -2 } ::= { sapEgrPlcrCtrlOvrLvlEntry 2 } sapEgrPlcrOvrTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapEgrPlcrOvrTblLastChgd indicates the timestamp of last change to the sapEgrPlcrOvrTable." ::= { tmnxSapObjs 94 } sapEgrPlcrOvrTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrPlcrOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP egress policer control override information." ::= { tmnxSapObjs 95 } sapEgrPlcrOvrEntry OBJECT-TYPE SYNTAX SapEgrPlcrOvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policer control override information about a specific policer of the SAP on the egress side." INDEX { svcId, sapPortId, sapEncapValue, tSapEgrPolicerId } ::= { sapEgrPlcrOvrTable 1 } SapEgrPlcrOvrEntry ::= SEQUENCE { sapEgrPlcrOvrRowStatus RowStatus, sapEgrPlcrOvrLastChgd TimeStamp, sapEgrPlcrOvrAdminPIR THPolPIRRateOverride, sapEgrPlcrOvrAdminCIR THPolCIRRateOverride, sapEgrPlcrOvrStatMode TmnxEgrPolicerStatModeOverride, sapEgrPlcrOvrMBS TPolicerBurstSizeBytesOverride, sapEgrPlcrOvrPktOffset TEgressPerPacketOffsetOvr, sapEgrPlcrOvrCBS TPolicerBurstSizeBytesOverride, sapEgrPlcrOvrAdminPIRPercent TPIRPercentOverride, sapEgrPlcrOvrAdminCIRPercent TCIRPercentOverride, sapEgrPlcrOvrAdminPIRHi TmnxQosRateHigh32, sapEgrPlcrOvrAdminPIRLo TmnxQosRateLow32, sapEgrPlcrOvrAdminCIRHi TmnxQosRateHigh32, sapEgrPlcrOvrAdminCIRLo TmnxQosRateLow32 } sapEgrPlcrOvrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table." ::= { sapEgrPlcrOvrEntry 1 } sapEgrPlcrOvrLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrPlcrOvrLastChgd indicates the timestamp of last change to this row in sapEgrPlcrOvrTable." ::= { sapEgrPlcrOvrEntry 2 } sapEgrPlcrOvrAdminPIR OBJECT-TYPE SYNTAX THPolPIRRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "sapEgrPlcrOvrAdminPIR specifies the administrative PIR specified by the user. This object is obsoleted on 15.1 release and replaced by sapEgrPlcrOvrAdminPIRHi and sapEgrPlcrOvrAdminPIRLo." DEFVAL { -2 } ::= { sapEgrPlcrOvrEntry 3 } sapEgrPlcrOvrAdminCIR OBJECT-TYPE SYNTAX THPolCIRRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "sapEgrPlcrOvrAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted on 15.1 release and replaced by sapEgrPlcrOvrAdminCIRHi and sapEgrPlcrOvrAdminCIRLo." DEFVAL { -2 } ::= { sapEgrPlcrOvrEntry 4 } sapEgrPlcrOvrStatMode OBJECT-TYPE SYNTAX TmnxEgrPolicerStatModeOverride MAX-ACCESS read-create STATUS current DESCRIPTION "sapEgrPlcrOvrStatMode specifies the mode of statistics collected by this policer on this sap." DEFVAL { noOverride } ::= { sapEgrPlcrOvrEntry 5 } sapEgrPlcrOvrMBS OBJECT-TYPE SYNTAX TPolicerBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "sapEgrPlcrOvrMBS specifies the maximum amount of buffer space (in bytes) allowed for the queue by this policer on this sap." DEFVAL { -2 } ::= { sapEgrPlcrOvrEntry 6 } sapEgrPlcrOvrPktOffset OBJECT-TYPE SYNTAX TEgressPerPacketOffsetOvr MAX-ACCESS read-create STATUS current DESCRIPTION "sapEgrPlcrOvrPktOffset specifies the packet byte offset for addition of policing information by this policer on this sap." DEFVAL { -128 } ::= { sapEgrPlcrOvrEntry 7 } sapEgrPlcrOvrCBS OBJECT-TYPE SYNTAX TPolicerBurstSizeBytesOverride UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "sapEgrPlcrOvrCBS specifies the amount of reserved buffer space (in bytes) for the queue set by this policer on this sap." DEFVAL { -2 } ::= { sapEgrPlcrOvrEntry 8 } sapEgrPlcrOvrAdminPIRPercent OBJECT-TYPE SYNTAX TPIRPercentOverride UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrOvrAdminPIRPercent specifies the desired administrative PIR value for this policer as a percentage." DEFVAL { -2 } ::= { sapEgrPlcrOvrEntry 9 } sapEgrPlcrOvrAdminCIRPercent OBJECT-TYPE SYNTAX TCIRPercentOverride UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrOvrAdminCIRPercent specifies the desired administrative CIR value for this policer as a percentage." DEFVAL { -2 } ::= { sapEgrPlcrOvrEntry 10 } sapEgrPlcrOvrAdminPIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrOvrAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with sapEgrPlcrOvrAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrPlcrOvrAdminPIRHi along with the value of sapEgrPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapEgrPlcrOvrAdminPIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminPIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967295 } ::= { sapEgrPlcrOvrEntry 11 } sapEgrPlcrOvrAdminPIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrOvrAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with sapEgrPlcrOvrAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrPlcrOvrAdminPIRHi along with the value of sapEgrPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapEgrPlcrOvrAdminPIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminPIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967294 } ::= { sapEgrPlcrOvrEntry 12 } sapEgrPlcrOvrAdminCIRHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrOvrAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with sapEgrPlcrOvrAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrPlcrOvrAdminCIRHi along with the value of sapEgrPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapEgrPlcrOvrAdminCIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminCIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967295 } ::= { sapEgrPlcrOvrEntry 13 } sapEgrPlcrOvrAdminCIRLo OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrPlcrOvrAdminCIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with sapEgrPlcrOvrAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrPlcrOvrAdminCIRHi along with the value of sapEgrPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate. When the value of sapEgrPlcrOvrAdminCIRHi is set to 4294967295 (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminCIRLo is set to 4294967294 (0xFFFFFFFE), rate for this policer indicates no override." DEFVAL { 4294967294 } ::= { sapEgrPlcrOvrEntry 14 } sapIngQosPolicerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ingress QoS policer SAP statistics." ::= { tmnxSapObjs 96 } sapIngQosPolicerStatsEntry OBJECT-TYPE SYNTAX SapIngQosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress statistics about a specific SAP's QoS policer." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosPStatsPolId } ::= { sapIngQosPolicerStatsTable 1 } SapIngQosPolicerStatsEntry ::= SEQUENCE { sapIngQosPStatsPolId TIngressPolicerId, sapIngQosPStatsCustId TmnxCustId, sapIngQosPStatsMode TmnxIngPolicerStatMode, sapIngQosPStatsOffHiPrioPkts Counter64, sapIngQosPStatsOffHiPrioPktsLo Counter32, sapIngQosPStatsOffHiPrioPktsHi Counter32, sapIngQosPStatsDrpHiPrioPkts Counter64, sapIngQosPStatsDrpHiPrioPktsLo Counter32, sapIngQosPStatsDrpHiPrioPktsHi Counter32, sapIngQosPStatsOffLoPrioPkts Counter64, sapIngQosPStatsOffLoPrioPktsLo Counter32, sapIngQosPStatsOffLoPrioPktsHi Counter32, sapIngQosPStatsDrpLoPrioPkts Counter64, sapIngQosPStatsDrpLoPrioPktsLo Counter32, sapIngQosPStatsDrpLoPrioPktsHi Counter32, sapIngQosPStatsOffHiPrioOcts Counter64, sapIngQosPStatsOffHiPrioOctsLo Counter32, sapIngQosPStatsOffHiPrioOctsHi Counter32, sapIngQosPStatsDrpHiPrioOcts Counter64, sapIngQosPStatsDrpHiPrioOctsLo Counter32, sapIngQosPStatsDrpHiPrioOctsHi Counter32, sapIngQosPStatsOffLoPrioOcts Counter64, sapIngQosPStatsOffLoPrioOctsLo Counter32, sapIngQosPStatsOffLoPrioOctsHi Counter32, sapIngQosPStatsDrpLoPrioOcts Counter64, sapIngQosPStatsDrpLoPrioOctsLo Counter32, sapIngQosPStatsDrpLoPrioOctsHi Counter32, sapIngQosPStatsFwdInProfPkts Counter64, sapIngQosPStatsFwdInProfPktsLo Counter32, sapIngQosPStatsFwdInProfPktsHi Counter32, sapIngQosPStatsFwdOutProfPkts Counter64, sapIngQosPStatsFwdOutProfPktsLo Counter32, sapIngQosPStatsFwdOutProfPktsHi Counter32, sapIngQosPStatsFwdInProfOcts Counter64, sapIngQosPStatsFwdInProfOctsLo Counter32, sapIngQosPStatsFwdInProfOctsHi Counter32, sapIngQosPStatsFwdOutProfOcts Counter64, sapIngQosPStatsFwdOutProfOctsLo Counter32, sapIngQosPStatsFwdOutProfOctsHi Counter32, sapIngQosPStatsUncolPktsOff Counter64, sapIngQosPStatsUncolPktsOffLo Counter32, sapIngQosPStatsUncolPktsOffHi Counter32, sapIngQosPStatsUncolOctsOff Counter64, sapIngQosPStatsUncolOctsOffLo Counter32, sapIngQosPStatsUncolOctsOffHi Counter32, sapIngQosPStatsDrpExdProfPkts Counter64, sapIngQosPStatsDrpExdProfOcts Counter64 } sapIngQosPStatsPolId OBJECT-TYPE SYNTAX TIngressPolicerId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the ingress QoS policer of this SAP." ::= { sapIngQosPolicerStatsEntry 1 } sapIngQosPStatsCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { sapIngQosPolicerStatsEntry 2 } sapIngQosPStatsMode OBJECT-TYPE SYNTAX TmnxIngPolicerStatMode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosPStatsMode indicates the stat mode used by the policer." ::= { sapIngQosPolicerStatsEntry 3 } sapIngQosPStatsOffHiPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPolicerStatsEntry 4 } sapIngQosPStatsOffHiPrioPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsOffHiPrioPkts." ::= { sapIngQosPolicerStatsEntry 5 } sapIngQosPStatsOffHiPrioPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsOffHiPrioPkts." ::= { sapIngQosPolicerStatsEntry 6 } sapIngQosPStatsDrpHiPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPolicerStatsEntry 7 } sapIngQosPStatsDrpHiPrioPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsDrpHiPrioPkts." ::= { sapIngQosPolicerStatsEntry 8 } sapIngQosPStatsDrpHiPrioPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsDrpHiPrioPkts." ::= { sapIngQosPolicerStatsEntry 9 } sapIngQosPStatsOffLoPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPolicerStatsEntry 10 } sapIngQosPStatsOffLoPrioPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsOffLoPrioPkts." ::= { sapIngQosPolicerStatsEntry 11 } sapIngQosPStatsOffLoPrioPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsOffLoPrioPkts." ::= { sapIngQosPolicerStatsEntry 12 } sapIngQosPStatsDrpLoPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPolicerStatsEntry 13 } sapIngQosPStatsDrpLoPrioPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsDrpLoPrioPkts." ::= { sapIngQosPolicerStatsEntry 14 } sapIngQosPStatsDrpLoPrioPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsDrpLoPrioPkts." ::= { sapIngQosPolicerStatsEntry 15 } sapIngQosPStatsOffHiPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPolicerStatsEntry 16 } sapIngQosPStatsOffHiPrioOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsOffHiPrioOcts." ::= { sapIngQosPolicerStatsEntry 17 } sapIngQosPStatsOffHiPrioOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsOffHiPrioOcts." ::= { sapIngQosPolicerStatsEntry 18 } sapIngQosPStatsDrpHiPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPolicerStatsEntry 19 } sapIngQosPStatsDrpHiPrioOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsDrpHiPrioOcts." ::= { sapIngQosPolicerStatsEntry 20 } sapIngQosPStatsDrpHiPrioOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsDrpHiPrioOcts." ::= { sapIngQosPolicerStatsEntry 21 } sapIngQosPStatsOffLoPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Pchip." ::= { sapIngQosPolicerStatsEntry 22 } sapIngQosPStatsOffLoPrioOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsOffLoPrioOcts." ::= { sapIngQosPolicerStatsEntry 23 } sapIngQosPStatsOffLoPrioOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsOffLoPrioOcts." ::= { sapIngQosPolicerStatsEntry 24 } sapIngQosPStatsDrpLoPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPolicerStatsEntry 25 } sapIngQosPStatsDrpLoPrioOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsDrpLoPrioOcts." ::= { sapIngQosPolicerStatsEntry 26 } sapIngQosPStatsDrpLoPrioOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsDrpLoPrioOcts." ::= { sapIngQosPolicerStatsEntry 27 } sapIngQosPStatsFwdInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the ingress Pchip." ::= { sapIngQosPolicerStatsEntry 28 } sapIngQosPStatsFwdInProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsFwdInProfPkts." ::= { sapIngQosPolicerStatsEntry 29 } sapIngQosPStatsFwdInProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsFwdInProfPkts." ::= { sapIngQosPolicerStatsEntry 30 } sapIngQosPStatsFwdOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the ingress Pchip." ::= { sapIngQosPolicerStatsEntry 31 } sapIngQosPStatsFwdOutProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsFwdOutProfPkts." ::= { sapIngQosPolicerStatsEntry 32 } sapIngQosPStatsFwdOutProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsFwdOutProfPkts." ::= { sapIngQosPolicerStatsEntry 33 } sapIngQosPStatsFwdInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the ingress Pchip." ::= { sapIngQosPolicerStatsEntry 34 } sapIngQosPStatsFwdInProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsFwdInProfOcts." ::= { sapIngQosPolicerStatsEntry 35 } sapIngQosPStatsFwdInProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsFwdInProfOcts." ::= { sapIngQosPolicerStatsEntry 36 } sapIngQosPStatsFwdOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the ingress Pchip." ::= { sapIngQosPolicerStatsEntry 37 } sapIngQosPStatsFwdOutProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsFwdOutProfOcts." ::= { sapIngQosPolicerStatsEntry 38 } sapIngQosPStatsFwdOutProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsFwdOutProfOcts." ::= { sapIngQosPolicerStatsEntry 39 } sapIngQosPStatsUncolPktsOff OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored packets offered to the ingress Pchip." ::= { sapIngQosPolicerStatsEntry 40 } sapIngQosPStatsUncolPktsOffLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsUncolPktsOff." ::= { sapIngQosPolicerStatsEntry 41 } sapIngQosPStatsUncolPktsOffHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsUncolPktsOff." ::= { sapIngQosPolicerStatsEntry 42 } sapIngQosPStatsUncolOctsOff OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored octets offered to the ingress Pchip." ::= { sapIngQosPolicerStatsEntry 43 } sapIngQosPStatsUncolOctsOffLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsUncolOctsOff." ::= { sapIngQosPolicerStatsEntry 44 } sapIngQosPStatsUncolOctsOffHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsUncolOctsOff." ::= { sapIngQosPolicerStatsEntry 45 } sapIngQosPStatsDrpExdProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosPStatsDrpExdProfPkts indicates the number of exceed-profile packets dropped." ::= { sapIngQosPolicerStatsEntry 46 } sapIngQosPStatsDrpExdProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosPStatsDrpExdProfOcts indicates the number of exceed-profile octets dropped." ::= { sapIngQosPolicerStatsEntry 47 } sapEgrQosPolicerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains egress QoS policer SAP statistics." ::= { tmnxSapObjs 97 } sapEgrQosPolicerStatsEntry OBJECT-TYPE SYNTAX SapEgrQosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific SAP's QoS policer." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosPStatsPolId } ::= { sapEgrQosPolicerStatsTable 1 } SapEgrQosPolicerStatsEntry ::= SEQUENCE { sapEgrQosPStatsPolId TEgressPolicerId, sapEgrQosPStatsCustId TmnxCustId, sapEgrQosPStatsMode TmnxEgrPolicerStatMode, sapEgrQosPStatsOffInProfPkts Counter64, sapEgrQosPStatsOffInProfPktsLo Counter32, sapEgrQosPStatsOffInProfPktsHi Counter32, sapEgrQosPStatsFwdInProfPkts Counter64, sapEgrQosPStatsFwdInProfPktsLo Counter32, sapEgrQosPStatsFwdInProfPktsHi Counter32, sapEgrQosPStatsDrpInProfPkts Counter64, sapEgrQosPStatsDrpInProfPktsLo Counter32, sapEgrQosPStatsDrpInProfPktsHi Counter32, sapEgrQosPStatsOffOutProfPkts Counter64, sapEgrQosPStatsOffOutProfPktsLo Counter32, sapEgrQosPStatsOffOutProfPktsHi Counter32, sapEgrQosPStatsFwdOutProfPkts Counter64, sapEgrQosPStatsFwdOutProfPktsLo Counter32, sapEgrQosPStatsFwdOutProfPktsHi Counter32, sapEgrQosPStatsDrpOutProfPkts Counter64, sapEgrQosPStatsDrpOutProfPktsLo Counter32, sapEgrQosPStatsDrpOutProfPktsHi Counter32, sapEgrQosPStatsOffInProfOcts Counter64, sapEgrQosPStatsOffInProfOctsLo Counter32, sapEgrQosPStatsOffInProfOctsHi Counter32, sapEgrQosPStatsFwdInProfOcts Counter64, sapEgrQosPStatsFwdInProfOctsLo Counter32, sapEgrQosPStatsFwdInProfOctsHi Counter32, sapEgrQosPStatsDrpInProfOcts Counter64, sapEgrQosPStatsDrpInProfOctsLo Counter32, sapEgrQosPStatsDrpInProfOctsHi Counter32, sapEgrQosPStatsOffOutProfOcts Counter64, sapEgrQosPStatsOffOutProfOctsLo Counter32, sapEgrQosPStatsOffOutProfOctsHi Counter32, sapEgrQosPStatsFwdOutProfOcts Counter64, sapEgrQosPStatsFwdOutProfOctsLo Counter32, sapEgrQosPStatsFwdOutProfOctsHi Counter32, sapEgrQosPStatsDrpOutProfOcts Counter64, sapEgrQosPStatsDrpOutProfOctsLo Counter32, sapEgrQosPStatsDrpOutProfOctsHi Counter32, sapEgrQosPStatsUncolPktsOff Counter64, sapEgrQosPStatsUncolPktsOffLo Counter32, sapEgrQosPStatsUncolPktsOffHi Counter32, sapEgrQosPStatsUncolOctsOff Counter64, sapEgrQosPStatsUncolOctsOffLo Counter32, sapEgrQosPStatsUncolOctsOffHi Counter32, sapEgrQosPStatsFwdExdProfPkts Counter64, sapEgrQosPStatsDrpExdProfPkts Counter64, sapEgrQosPStatsFwdExdProfOcts Counter64, sapEgrQosPStatsDrpExdProfOcts Counter64, sapEgrQosPStatsOffExdProfPkts Counter64, sapEgrQosPStatsOffExdProfOcts Counter64, sapEgrQosPStatsOffInPlusProfPkts Counter64, sapEgrQosPStatsFwdInPlusProfPkts Counter64, sapEgrQosPStatsDrpInPlusProfPkts Counter64, sapEgrQosPStatsOffInPlusProfOcts Counter64, sapEgrQosPStatsFwdInPlusProfOcts Counter64, sapEgrQosPStatsDrpInPlusProfOcts Counter64 } sapEgrQosPStatsPolId OBJECT-TYPE SYNTAX TEgressPolicerId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the egress QoS queue of this SAP." ::= { sapEgrQosPolicerStatsEntry 1 } sapEgrQosPStatsCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { sapEgrQosPolicerStatsEntry 2 } sapEgrQosPStatsMode OBJECT-TYPE SYNTAX TmnxEgrPolicerStatMode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsMode indicates the stat mode used by the policer." ::= { sapEgrQosPolicerStatsEntry 3 } sapEgrQosPStatsOffInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) offered by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 4 } sapEgrQosPStatsOffInProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsOffInProfPkts." ::= { sapEgrQosPolicerStatsEntry 5 } sapEgrQosPStatsOffInProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsOffInProfPkts." ::= { sapEgrQosPolicerStatsEntry 6 } sapEgrQosPStatsFwdInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 7 } sapEgrQosPStatsFwdInProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsFwdInProfPkts." ::= { sapEgrQosPolicerStatsEntry 8 } sapEgrQosPStatsFwdInProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsFwdInProfPkts." ::= { sapEgrQosPolicerStatsEntry 9 } sapEgrQosPStatsDrpInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPolicerStatsEntry 10 } sapEgrQosPStatsDrpInProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsDrpInProfPkts." ::= { sapEgrQosPolicerStatsEntry 11 } sapEgrQosPStatsDrpInProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsDrpInProfPkts." ::= { sapEgrQosPolicerStatsEntry 12 } sapEgrQosPStatsOffOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) offered by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 13 } sapEgrQosPStatsOffOutProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsOffOutProfPkts." ::= { sapEgrQosPolicerStatsEntry 14 } sapEgrQosPStatsOffOutProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsOffOutProfPkts." ::= { sapEgrQosPolicerStatsEntry 15 } sapEgrQosPStatsFwdOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 16 } sapEgrQosPStatsFwdOutProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsFwdOutProfPkts." ::= { sapEgrQosPolicerStatsEntry 17 } sapEgrQosPStatsFwdOutProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsFwdOutProfPkts." ::= { sapEgrQosPolicerStatsEntry 18 } sapEgrQosPStatsDrpOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPolicerStatsEntry 19 } sapEgrQosPStatsDrpOutProfPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsDrpOutProfPkts." ::= { sapEgrQosPolicerStatsEntry 20 } sapEgrQosPStatsDrpOutProfPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsDrpOutProfPkts." ::= { sapEgrQosPolicerStatsEntry 21 } sapEgrQosPStatsOffInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) offered by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 22 } sapEgrQosPStatsOffInProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsOffInProfOcts." ::= { sapEgrQosPolicerStatsEntry 23 } sapEgrQosPStatsOffInProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsOffInProfOcts." ::= { sapEgrQosPolicerStatsEntry 24 } sapEgrQosPStatsFwdInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 25 } sapEgrQosPStatsFwdInProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsFwdInProfOcts." ::= { sapEgrQosPolicerStatsEntry 26 } sapEgrQosPStatsFwdInProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsFwdInProfOcts." ::= { sapEgrQosPolicerStatsEntry 27 } sapEgrQosPStatsDrpInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPolicerStatsEntry 28 } sapEgrQosPStatsDrpInProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsDrpInProfOcts." ::= { sapEgrQosPolicerStatsEntry 29 } sapEgrQosPStatsDrpInProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsDrpInProfOcts." ::= { sapEgrQosPolicerStatsEntry 30 } sapEgrQosPStatsOffOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 31 } sapEgrQosPStatsOffOutProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsOffOutProfOcts." ::= { sapEgrQosPolicerStatsEntry 32 } sapEgrQosPStatsOffOutProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsOffOutProfOcts." ::= { sapEgrQosPolicerStatsEntry 33 } sapEgrQosPStatsFwdOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 34 } sapEgrQosPStatsFwdOutProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsFwdOutProfOcts." ::= { sapEgrQosPolicerStatsEntry 35 } sapEgrQosPStatsFwdOutProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsFwdOutProfOcts." ::= { sapEgrQosPolicerStatsEntry 36 } sapEgrQosPStatsDrpOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPolicerStatsEntry 37 } sapEgrQosPStatsDrpOutProfOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapEgrQosPStatsDrpOutProfOcts." ::= { sapEgrQosPolicerStatsEntry 38 } sapEgrQosPStatsDrpOutProfOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapEgrQosPStatsDrpOutProfOcts." ::= { sapEgrQosPolicerStatsEntry 39 } sapEgrQosPStatsUncolPktsOff OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored packets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 40 } sapEgrQosPStatsUncolPktsOffLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsUncolPktsOff." ::= { sapEgrQosPolicerStatsEntry 41 } sapEgrQosPStatsUncolPktsOffHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsUncolPktsOff." ::= { sapEgrQosPolicerStatsEntry 42 } sapEgrQosPStatsUncolOctsOff OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored octets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 43 } sapEgrQosPStatsUncolOctsOffLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lower 32 bits of sapIngQosPStatsUncolOctsOff." ::= { sapEgrQosPolicerStatsEntry 44 } sapEgrQosPStatsUncolOctsOffHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upper 32 bits of sapIngQosPStatsUncolOctsOff." ::= { sapEgrQosPolicerStatsEntry 45 } sapEgrQosPStatsFwdExdProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsFwdExdProfPkts indicates the number of exceed-profile packets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 46 } sapEgrQosPStatsDrpExdProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsDrpExdProfPkts indicates the number of exceed-profile packets discarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 47 } sapEgrQosPStatsFwdExdProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsFwdExdProfOcts indicates the number of exceed-profile octets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 48 } sapEgrQosPStatsDrpExdProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsDrpExdProfOcts indicates the number of exceed-profile octets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 49 } sapEgrQosPStatsOffExdProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsOffExdProfPkts indicates the number of exceed-profile packets offered by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 50 } sapEgrQosPStatsOffExdProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsOffExdProfOcts indicates the number of exceed-profile octets offered by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 51 } sapEgrQosPStatsOffInPlusProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsOffInPlusProfPkts indicates the number of inplus-profile packets offered by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 52 } sapEgrQosPStatsFwdInPlusProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsFwdInPlusProfPkts indicates the number of inplus-profile packets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 53 } sapEgrQosPStatsDrpInPlusProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsDrpInPlusProfPkts indicates the number of inplus-profile packets discarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 54 } sapEgrQosPStatsOffInPlusProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsOffInPlusProfOcts indicates the number of inplus-profile octets offered by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 55 } sapEgrQosPStatsFwdInPlusProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsFwdInPlusProfOcts indicates the number of inplus-profile octets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 56 } sapEgrQosPStatsDrpInPlusProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosPStatsDrpInPlusProfOcts indicates the number of inplus-profile octets forwarded by the egress Pchip." ::= { sapEgrQosPolicerStatsEntry 57 } sapIngQosPlcyPolicerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosPlcyPolicerStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains ingress QoS policer SAP statistics, per Ingress QoS Policy the policer was used by. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 98 } sapIngQosPlcyPolicerStatsEntry OBJECT-TYPE SYNTAX SapIngQosPlcyPolicerStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Ingress statistics about a specific SAP's QoS policer for a given Qos policy." INDEX { svcId, sapPortId, sapEncapValue, sapIgQosPlcyPStatPlcyId, sapIgQosPlcyPStatPolId } ::= { sapIngQosPlcyPolicerStatsTable 1 } SapIngQosPlcyPolicerStatsEntry ::= SEQUENCE { sapIgQosPlcyPStatPlcyId TSapIngressPolicyID, sapIgQosPlcyPStatPolId TIngPolicerId, sapIgQosPlcyPStatCustId TmnxCustId, sapIgQosPlcyPStatMode TmnxIngPolicerStatMode, sapIgQosPlcyPStatOffHiPrioPkts Counter64, sapIgQosPlcyPStatOffHiPrioPktsL Counter32, sapIgQosPlcyPStatOffHiPrioPktsH Counter32, sapIgQosPlcyPStatDrpHiPrioPkts Counter64, sapIgQosPlcyPStatDrpHiPrioPktsL Counter32, sapIgQosPlcyPStatDrpHiPrioPktsH Counter32, sapIgQosPlcyPStatOffLoPrioPkts Counter64, sapIgQosPlcyPStatOffLoPrioPktsL Counter32, sapIgQosPlcyPStatOffLoPrioPktsH Counter32, sapIgQosPlcyPStatDrpLoPrioPkts Counter64, sapIgQosPlcyPStatDrpLoPrioPktsL Counter32, sapIgQosPlcyPStatDrpLoPrioPktsH Counter32, sapIgQosPlcyPStatOffHiPrioOcts Counter64, sapIgQosPlcyPStatOffHiPrioOctsL Counter32, sapIgQosPlcyPStatOffHiPrioOctsH Counter32, sapIgQosPlcyPStatDrpHiPrioOcts Counter64, sapIgQosPlcyPStatDrpHiPrioOctsL Counter32, sapIgQosPlcyPStatDrpHiPrioOctsH Counter32, sapIgQosPlcyPStatOffLoPrioOcts Counter64, sapIgQosPlcyPStatOffLoPrioOctsL Counter32, sapIgQosPlcyPStatOffLoPrioOctsH Counter32, sapIgQosPlcyPStatDrpLoPrioOcts Counter64, sapIgQosPlcyPStatDrpLoPrioOctsL Counter32, sapIgQosPlcyPStatDrpLoPrioOctsH Counter32, sapIgQosPlcyPStatFwdInProfPkts Counter64, sapIgQosPlcyPStatFwdInProfPktsL Counter32, sapIgQosPlcyPStatFwdInProfPktsH Counter32, sapIgQosPlcyPStatFwdOutProfPkts Counter64, sapIgQosPlcyPStatFwdOutProfPktsL Counter32, sapIgQosPlcyPStatFwdOutProfPktsH Counter32, sapIgQosPlcyPStatFwdInProfOcts Counter64, sapIgQosPlcyPStatFwdInProfOctsL Counter32, sapIgQosPlcyPStatFwdInProfOctsH Counter32, sapIgQosPlcyPStatFwdOutProfOcts Counter64, sapIgQosPlcyPStatFwdOutProfOctsL Counter32, sapIgQosPlcyPStatFwdOutProfOctsH Counter32, sapIgQosPlcyPStatUncolPktsOff Counter64, sapIgQosPlcyPStatUncolPktsOffL Counter32, sapIgQosPlcyPStatUncolPktsOffH Counter32, sapIgQosPlcyPStatUncolOctsOff Counter64, sapIgQosPlcyPStatUncolOctsOffL Counter32, sapIgQosPlcyPStatUncolOctsOffH Counter32 } sapIgQosPlcyPStatPlcyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The row index in the tSapIngressTable corresponding to this ingress QoS policy." ::= { sapIngQosPlcyPolicerStatsEntry 1 } sapIgQosPlcyPStatPolId OBJECT-TYPE SYNTAX TIngPolicerId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The index of the ingress QoS policer of this SAP used by the policy indicated by sapIgQosPlcyPStatPlcyId." ::= { sapIngQosPlcyPolicerStatsEntry 2 } sapIgQosPlcyPStatCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapIgQosPlcyPStatCustId indicates the Customer ID for the associated service." ::= { sapIngQosPlcyPolicerStatsEntry 3 } sapIgQosPlcyPStatMode OBJECT-TYPE SYNTAX TmnxIngPolicerStatMode MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatMode indicates the stat mode used by the policer." ::= { sapIngQosPlcyPolicerStatsEntry 4 } sapIgQosPlcyPStatOffHiPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatOffHiPrioPkts indicates the number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyPolicerStatsEntry 5 } sapIgQosPlcyPStatOffHiPrioPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatOffHiPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 6 } sapIgQosPlcyPStatOffHiPrioPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatOffHiPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 7 } sapIgQosPlcyPStatDrpHiPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatDrpHiPrioPkts indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyPolicerStatsEntry 8 } sapIgQosPlcyPStatDrpHiPrioPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 9 } sapIgQosPlcyPStatDrpHiPrioPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 10 } sapIgQosPlcyPStatOffLoPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatOffLoPrioPkts indicates the number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyPolicerStatsEntry 11 } sapIgQosPlcyPStatOffLoPrioPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatOffLoPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 12 } sapIgQosPlcyPStatOffLoPrioPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatOffLoPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 13 } sapIgQosPlcyPStatDrpLoPrioPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatDrpLoPrioPkts indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyPolicerStatsEntry 14 } sapIgQosPlcyPStatDrpLoPrioPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 15 } sapIgQosPlcyPStatDrpLoPrioPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts." ::= { sapIngQosPlcyPolicerStatsEntry 16 } sapIgQosPlcyPStatOffHiPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatOffHiPrioOcts indicates the number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyPolicerStatsEntry 17 } sapIgQosPlcyPStatOffHiPrioOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatOffHiPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 18 } sapIgQosPlcyPStatOffHiPrioOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatOffHiPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 19 } sapIgQosPlcyPStatDrpHiPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatDrpHiPrioOcts indicates the number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyPolicerStatsEntry 20 } sapIgQosPlcyPStatDrpHiPrioOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 21 } sapIgQosPlcyPStatDrpHiPrioOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 22 } sapIgQosPlcyPStatOffLoPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatOffLoPrioOcts indicates the number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip." ::= { sapIngQosPlcyPolicerStatsEntry 23 } sapIgQosPlcyPStatOffLoPrioOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatOffLoPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 24 } sapIgQosPlcyPStatOffLoPrioOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatOffLoPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 25 } sapIgQosPlcyPStatDrpLoPrioOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatDrpLoPrioOcts indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapIngQosPlcyPolicerStatsEntry 26 } sapIgQosPlcyPStatDrpLoPrioOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 27 } sapIgQosPlcyPStatDrpLoPrioOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts." ::= { sapIngQosPlcyPolicerStatsEntry 28 } sapIgQosPlcyPStatFwdInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Pchip." ::= { sapIngQosPlcyPolicerStatsEntry 29 } sapIgQosPlcyPStatFwdInProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatFwdInProfPkts." ::= { sapIngQosPlcyPolicerStatsEntry 30 } sapIgQosPlcyPStatFwdInProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatFwdInProfPkts." ::= { sapIngQosPlcyPolicerStatsEntry 31 } sapIgQosPlcyPStatFwdOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Pchip." ::= { sapIngQosPlcyPolicerStatsEntry 32 } sapIgQosPlcyPStatFwdOutProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatFwdOutProfPkts." ::= { sapIngQosPlcyPolicerStatsEntry 33 } sapIgQosPlcyPStatFwdOutProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatFwdOutProfPkts." ::= { sapIngQosPlcyPolicerStatsEntry 34 } sapIgQosPlcyPStatFwdInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatFwdInProfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Pchip." ::= { sapIngQosPlcyPolicerStatsEntry 35 } sapIgQosPlcyPStatFwdInProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatFwdInProfOcts." ::= { sapIngQosPlcyPolicerStatsEntry 36 } sapIgQosPlcyPStatFwdInProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatFwdInProfOcts." ::= { sapIngQosPlcyPolicerStatsEntry 37 } sapIgQosPlcyPStatFwdOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatFwdOutProfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Pchip." ::= { sapIngQosPlcyPolicerStatsEntry 38 } sapIgQosPlcyPStatFwdOutProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatFwdOutProfOcts." ::= { sapIngQosPlcyPolicerStatsEntry 39 } sapIgQosPlcyPStatFwdOutProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatFwdOutProfOcts." ::= { sapIngQosPlcyPolicerStatsEntry 40 } sapIgQosPlcyPStatUncolPktsOff OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatUncolPktsOff indicates the number of uncolored packets offered to the ingress Pchip." ::= { sapIngQosPlcyPolicerStatsEntry 41 } sapIgQosPlcyPStatUncolPktsOffL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatUncolPktsOff." ::= { sapIngQosPlcyPolicerStatsEntry 42 } sapIgQosPlcyPStatUncolPktsOffH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatUncolPktsOff." ::= { sapIngQosPlcyPolicerStatsEntry 43 } sapIgQosPlcyPStatUncolOctsOff OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapIgQosPlcyPStatUncolOctsOff indicates the number of uncolored octets offered to the ingress Pchip." ::= { sapIngQosPlcyPolicerStatsEntry 44 } sapIgQosPlcyPStatUncolOctsOffL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapIgQosPlcyPStatUncolOctsOff." ::= { sapIngQosPlcyPolicerStatsEntry 45 } sapIgQosPlcyPStatUncolOctsOffH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapIgQosPlcyPStatUncolOctsOff." ::= { sapIngQosPlcyPolicerStatsEntry 46 } sapEgrQosPlcyPolicerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosPlcyPolicerStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains egress QoS policer SAP statistics per Egress QoS Policy the policer was used by. This table is obsoleted in 14.0 release." ::= { tmnxSapObjs 99 } sapEgrQosPlcyPolicerStatsEntry OBJECT-TYPE SYNTAX SapEgrQosPlcyPolicerStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Egress statistics about a specific SAP's QoS policer for a given Qos policy." INDEX { svcId, sapPortId, sapEncapValue, sapEgQosPlcyPStatPlcyId, sapEgQosPlcyPStatPolId } ::= { sapEgrQosPlcyPolicerStatsTable 1 } SapEgrQosPlcyPolicerStatsEntry ::= SEQUENCE { sapEgQosPlcyPStatPlcyId TSapEgressPolicyID, sapEgQosPlcyPStatPolId TEgrPolicerId, sapEgQosPlcyPStatCustId TmnxCustId, sapEgQosPlcyPStatMode TmnxEgrPolicerStatMode, sapEgQosPlcyPStatOffInProfPkts Counter64, sapEgQosPlcyPStatOffInProfPktsL Counter32, sapEgQosPlcyPStatOffInProfPktsH Counter32, sapEgQosPlcyPStatFwdInProfPkts Counter64, sapEgQosPlcyPStatFwdInProfPktsL Counter32, sapEgQosPlcyPStatFwdInProfPktsH Counter32, sapEgQosPlcyPStatDrpInProfPkts Counter64, sapEgQosPlcyPStatDrpInProfPktsL Counter32, sapEgQosPlcyPStatDrpInProfPktsH Counter32, sapEgQosPlcyPStatOffOutProfPkts Counter64, sapEgQosPlcyPStatOffOutProfPktsL Counter32, sapEgQosPlcyPStatOffOutProfPktsH Counter32, sapEgQosPlcyPStatFwdOutProfPkts Counter64, sapEgQosPlcyPStatFwdOutProfPktsL Counter32, sapEgQosPlcyPStatFwdOutProfPktsH Counter32, sapEgQosPlcyPStatDrpOutProfPkts Counter64, sapEgQosPlcyPStatDrpOutProfPktsL Counter32, sapEgQosPlcyPStatDrpOutProfPktsH Counter32, sapEgQosPlcyPStatOffInProfOcts Counter64, sapEgQosPlcyPStatOffInProfOctsL Counter32, sapEgQosPlcyPStatOffInProfOctsH Counter32, sapEgQosPlcyPStatFwdInProfOcts Counter64, sapEgQosPlcyPStatFwdInProfOctsL Counter32, sapEgQosPlcyPStatFwdInProfOctsH Counter32, sapEgQosPlcyPStatDrpInProfOcts Counter64, sapEgQosPlcyPStatDrpInProfOctsL Counter32, sapEgQosPlcyPStatDrpInProfOctsH Counter32, sapEgQosPlcyPStatOffOutProfOcts Counter64, sapEgQosPlcyPStatOffOutProfOctsL Counter32, sapEgQosPlcyPStatOffOutProfOctsH Counter32, sapEgQosPlcyPStatFwdOutProfOcts Counter64, sapEgQosPlcyPStatFwdOutProfOctsL Counter32, sapEgQosPlcyPStatFwdOutProfOctsH Counter32, sapEgQosPlcyPStatDrpOutProfOcts Counter64, sapEgQosPlcyPStatDrpOutProfOctsL Counter32, sapEgQosPlcyPStatDrpOutProfOctsH Counter32 } sapEgQosPlcyPStatPlcyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The row index in the tSapEgressTable corresponding to this egress QoS policy." ::= { sapEgrQosPlcyPolicerStatsEntry 1 } sapEgQosPlcyPStatPolId OBJECT-TYPE SYNTAX TEgrPolicerId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The index of the egress QoS policer of this SAP used by the policy indicated by sapEgQosPlcyPStatPlcyId." ::= { sapEgrQosPlcyPolicerStatsEntry 2 } sapEgQosPlcyPStatCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object sapEgQosPlcyPStatCustId indicates the Customer ID for the associated service." ::= { sapEgrQosPlcyPolicerStatsEntry 3 } sapEgQosPlcyPStatMode OBJECT-TYPE SYNTAX TmnxEgrPolicerStatMode MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatMode indicates the stat mode used by the policer." ::= { sapEgrQosPlcyPolicerStatsEntry 4 } sapEgQosPlcyPStatOffInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatOffInProfPkts indicates the number of in-profile packets (rate below CIR) offered by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 5 } sapEgQosPlcyPStatOffInProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatOffInProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 6 } sapEgQosPlcyPStatOffInProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatOffInProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 7 } sapEgQosPlcyPStatFwdInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 8 } sapEgQosPlcyPStatFwdInProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatFwdInProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 9 } sapEgQosPlcyPStatFwdInProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatFwdInProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 10 } sapEgQosPlcyPStatDrpInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatDrpInProfPkts indicates the number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyPolicerStatsEntry 11 } sapEgQosPlcyPStatDrpInProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatDrpInProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 12 } sapEgQosPlcyPStatDrpInProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatDrpInProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 13 } sapEgQosPlcyPStatOffOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatOffOutProfPkts indicates the number of out-of-profile packets (rate above CIR) offered by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 14 } sapEgQosPlcyPStatOffOutProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatOffOutProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 15 } sapEgQosPlcyPStatOffOutProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatOffOutProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 16 } sapEgQosPlcyPStatFwdOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 17 } sapEgQosPlcyPStatFwdOutProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatFwdOutProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 18 } sapEgQosPlcyPStatFwdOutProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatFwdOutProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 19 } sapEgQosPlcyPStatDrpOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatDrpOutProfPkts indicates the number out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyPolicerStatsEntry 20 } sapEgQosPlcyPStatDrpOutProfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatDrpOutProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 21 } sapEgQosPlcyPStatDrpOutProfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatDrpOutProfPkts." ::= { sapEgrQosPlcyPolicerStatsEntry 22 } sapEgQosPlcyPStatOffInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatOffInProfOcts indicates the number of in-profile octets (rate below CIR) offered by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 23 } sapEgQosPlcyPStatOffInProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatOffInProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 24 } sapEgQosPlcyPStatOffInProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatOffInProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 25 } sapEgQosPlcyPStatFwdInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatFwdInProfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 26 } sapEgQosPlcyPStatFwdInProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatFwdInProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 27 } sapEgQosPlcyPStatFwdInProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatFwdInProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 28 } sapEgQosPlcyPStatDrpInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatDrpInProfOcts indicates the number in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyPolicerStatsEntry 29 } sapEgQosPlcyPStatDrpInProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatDrpInProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 30 } sapEgQosPlcyPStatDrpInProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatDrpInProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 31 } sapEgQosPlcyPStatOffOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatOffOutProfOcts indicates the number of out-of-profile octets (rate above CIR) offered by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 32 } sapEgQosPlcyPStatOffOutProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatOffOutProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 33 } sapEgQosPlcyPStatOffOutProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatOffOutProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 34 } sapEgQosPlcyPStatFwdOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatFwdOutProfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrQosPlcyPolicerStatsEntry 35 } sapEgQosPlcyPStatFwdOutProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatFwdOutProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 36 } sapEgQosPlcyPStatFwdOutProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatFwdOutProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 37 } sapEgQosPlcyPStatDrpOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of sapEgQosPlcyPStatDrpOutProfOcts indicates the number out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrQosPlcyPolicerStatsEntry 38 } sapEgQosPlcyPStatDrpOutProfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Lower 32 bits of sapEgQosPlcyPStatDrpOutProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 39 } sapEgQosPlcyPStatDrpOutProfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Upper 32 bits of sapEgQosPlcyPStatDrpOutProfOcts." ::= { sapEgrQosPlcyPolicerStatsEntry 40 } tmnxSapNotifyObjs OBJECT IDENTIFIER ::= { tmnxSapObjs 100 } sapNotifyPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ID of the access port where a SAP is defined." ::= { tmnxSapNotifyObjs 1 } msapStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The status of the Managed SAP which is used by the msapStateChanged notification to indicate what state the Managed SAP has entered: 'created', 'modified', or 'deleted'." ::= { tmnxSapNotifyObjs 2 } svcManagedSapCreationError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object svcManagedSapCreationError indicates the reason why the system was unable to create the managed SAP." ::= { tmnxSapNotifyObjs 3 } sapTlsNotifyMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapTlsNotifyMacAddr indicates the MAC address associated with a VPLS SAP." ::= { tmnxSapNotifyObjs 4 } sapBGPPeeringHostIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapBGPPeeringHostIpAddrType indicates the address type of sapBGPPeeringHostIpAddr." ::= { tmnxSapNotifyObjs 5 } sapBGPPeeringHostIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapBGPPeeringHostIpAddr indicates the IP address of the host." ::= { tmnxSapNotifyObjs 6 } sapBGPPeeringNotifDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object sapBGPPeeringNotifDescription is a printable character string." ::= { tmnxSapNotifyObjs 7 } sapBGPPeeringAttrDiscarded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapBGPPeeringAttrDiscarded is equal to 'true' if the BGP Peering attributes have been discarded." ::= { tmnxSapNotifyObjs 8 } sapBGPPeeringVRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value that identifies a virtual router." ::= { tmnxSapNotifyObjs 9 } sapTunnelNotifyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapTunnelNotifyName specifies the name of the IPsec or GRE tunnel." ::= { tmnxSapNotifyObjs 10 } sapTunnelNotifyReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapTunnelNotifyReason indicates the reason for the tunnel notification." ::= { tmnxSapNotifyObjs 11 } sapTunnelNotifyState OBJECT-TYPE SYNTAX ServiceOperStatus MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapTunnelNotifyState indicates the operational state of the tunnel in the notification." ::= { tmnxSapNotifyObjs 12 } sapNotifyReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapNotifyReason indicates the reason for the SAP notification." ::= { tmnxSapNotifyObjs 13 } sapNotifyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapNotifyName specifies a name." ::= { tmnxSapNotifyObjs 14 } sapPppNcpFailureProtocol OBJECT-TYPE SYNTAX INTEGER { ipcp (1), ipv6cp (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapPppNcpFailureProtocol indicates the failing NCP protocol." ::= { tmnxSapNotifyObjs 15 } sapIpipeCeIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapIpipeCeIpAddrType indicates the type of CE IP address on an IPIPE SAP. The CE IP address is specified by sapIpipeCeIpAddress." ::= { tmnxSapNotifyObjs 16 } sapIpipeCeIpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapIpipeCeIpAddress indicates the CE IP address of type sapIpipeCeIpAddrType on an IPIPE SAP." ::= { tmnxSapNotifyObjs 17 } sapNotifyEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the label used to identify this SAP on the access port specified by sapNotifyPortId." ::= { tmnxSapNotifyObjs 18 } sapTunnelNotifyConfigIpMtu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapTunnelNotifyConfigIpMtu indicates the IP tunnel's configured IP MTU for packets entering the tunnel from the non-encapsulated side." ::= { tmnxSapNotifyObjs 19 } sapTunnelNotifyEncapOverhead OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapTunnelNotifyEncapOverhead indicates the IP Tunnel's encapsulation overhead." ::= { tmnxSapNotifyObjs 20 } sapTunnelNotifyConfigEncapIpMtu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapTunnelNotifyConfigEncapIpMtu indicates the IP Tunnel's configured encapsulated IP MTU." ::= { tmnxSapNotifyObjs 21 } sapRipListenerHostIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapRipListenerHostIpAddrType indicates the address type of sapRipListenerHostIpAddr." ::= { tmnxSapNotifyObjs 22 } sapRipListenerHostIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapRipListenerHostIpAddr indicates the IP address of the host." ::= { tmnxSapNotifyObjs 23 } sapRipListenerVRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object sapRipListenerVRtrID uniquely identifies a virtual router." ::= { tmnxSapNotifyObjs 24 } sapRipListenerNotifDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object sapRipListenerNotifDescription is a printable character string." ::= { tmnxSapNotifyObjs 25 } sapNotifyIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapNotifyIpAddrType indicates the address type of sapNotifyIpAddr." ::= { tmnxSapNotifyObjs 26 } sapNotifyIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapNotifyIpAddr indicates an IP address." ::= { tmnxSapNotifyObjs 27 } sapNotifyIfName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapNotifyIfName specifies the interface name used to refer to L3 interface." ::= { tmnxSapNotifyObjs 28 } sapNotifyPortState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), other (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object sapNotifyPortState specifies the status of the port for the particular sap as Up, Down, or Other." ::= { tmnxSapNotifyObjs 29 } sapTmplTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTmplTblLastChanged indicates the sysUpTime at the time of the last modification of sapTmplTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 101 } sapTmplTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTmplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic SAP template information." ::= { tmnxSapObjs 102 } sapTmplEntry OBJECT-TYPE SYNTAX SapTmplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic information about a specific SAP template." INDEX { sapTmplName } ::= { sapTmplTable 1 } SapTmplEntry ::= SEQUENCE { sapTmplName TNamedItem, sapTmplRowStatus RowStatus, sapTmplLastChanged TimeStamp, sapTmplSapCount Unsigned32, sapTmplType ServType, sapTmplIngressQosPolicyId TTmplPolicyID, sapTmplIngressMacFilterId TFilterID, sapTmplIngressIpFilterId TFilterID, sapTmplEgressQosPolicyId TTmplPolicyID, sapTmplEgressMacFilterId TFilterID, sapTmplEgressIpFilterId TFilterID, sapTmplCollectAcctStats TruthValue, sapTmplIngressQosSchedulerPolicy ServObjName, sapTmplEgressQosSchedulerPolicy ServObjName, sapTmplIngressSharedQueuePolicy ServObjName, sapTmplIngressMatchQinQDot1PBits INTEGER, sapTmplIngressIpv6FilterId TFilterID, sapTmplEgressIpv6FilterId TFilterID, sapTmplIngUseMultipointShared TruthValue, sapTmplEgressQinQMarkTopOnly TruthValue, sapTmplEgressAggRateLimit TPortSchedulerAggRateLimitPIR, sapTmplEgressFrameBasedAcctg TruthValue, sapTmplIngressAggRateLimit TPortSchedulerPIR, sapTmplIngPolicerPolicy TNamedItemOrEmpty, sapTmplEgrPolicerPolicy TNamedItemOrEmpty, sapTmplDot1agCfmMip TruthValue, sapTmplCpmProtPolicyId TCpmProtPolicyIDOrDefault, sapTmplCpmProtMonitorMac TruthValue, sapTmplCpmProtEthCfmMonitorFlags BITS, sapTmplEgrAggRateLUB TruthValue, sapTmplEthCfmSquelchIngress BITS, sapTmplEgrAggRateLimitHi TmnxQosRateHigh32, sapTmplEgrAggRateLimit TmnxQosRateLow32, sapTmplDCpuProtPolicy TNamedItemOrEmpty, sapTmplIngressQosPolicyName TLNamedItemOrEmpty, sapTmplEgressQosPolicyName TLNamedItemOrEmpty, sapTmplIngressIpFilterName TLNamedItemOrEmpty, sapTmplIngressIpv6FilterName TLNamedItemOrEmpty, sapTmplIngressMacFilterName TLNamedItemOrEmpty, sapTmplEgressIpFilterName TLNamedItemOrEmpty, sapTmplEgressIpv6FilterName TLNamedItemOrEmpty, sapTmplEgressMacFilterName TLNamedItemOrEmpty, sapTmplEthCfmSquelchIngressCtag BITS } sapTmplName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapTmplName specifies the SAP template name. This name should be unique within the SAP template domain." ::= { sapTmplEntry 1 } sapTmplRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This value of the object sapTmplRowStatus specifies the status of this row." ::= { sapTmplEntry 2 } sapTmplLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTmplLastChanged indicates the timestamp of last change to this row in sapTmplTable." ::= { sapTmplEntry 3 } sapTmplSapCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTmplSapCount indicates the number of instantiated SAPs created using this template." ::= { sapTmplEntry 4 } sapTmplType OBJECT-TYPE SYNTAX ServType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of service where this SAP is defined. An 'inconsistentValue' error is returned if an attempt is made to change the value of this object after row creation." ::= { sapTmplEntry 5 } sapTmplIngressQosPolicyId OBJECT-TYPE SYNTAX TTmplPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTmplIngressQosPolicyId specifies the row index in the tSapIngressTable corresponding to this ingress QoS policy. The value 0 is needed for mirror SAPs that cannot have a QoS policy assigned. The value of this object is ignored, when the value of sapTmplIngressQosPolicyName it set to non-default value." DEFVAL { 0 } ::= { sapTmplEntry 6 } sapTmplIngressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTmplIngressMacFilterId specifies the row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapTmplEntry 7 } sapTmplIngressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTmplIngressIpFilterId specifies the row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapTmplEntry 8 } sapTmplEgressQosPolicyId OBJECT-TYPE SYNTAX TTmplPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTmplEgressQosPolicyId specifies the row index in the tSapEgressTable corresponding to this egress QoS policy. The value of this object is ignored, when the value of sapTmplEgressQosPolicyName it set to non-default value." DEFVAL { 0 } ::= { sapTmplEntry 9 } sapTmplEgressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapTmplEntry 10 } sapTmplEgressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sapTmplEntry 11 } sapTmplCollectAcctStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the agent collects accounting statistics on this SAP." DEFVAL { false } ::= { sapTmplEntry 12 } sapTmplIngressQosSchedulerPolicy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplIngressQosSchedulerPolicy specifies the ingress QoS scheduler for this SAP." DEFVAL { "" } ::= { sapTmplEntry 13 } sapTmplEgressQosSchedulerPolicy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgressQosSchedulerPolicy specifies the egress QoS scheduler for this SAP." DEFVAL { "" } ::= { sapTmplEntry 14 } sapTmplIngressSharedQueuePolicy OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the ingress shared queue policy used by this SAP. When the value of this object is null it means that the SAP will use individual ingress QoS queues, instead of the shared ones." DEFVAL { "" } ::= { sapTmplEntry 15 } sapTmplIngressMatchQinQDot1PBits OBJECT-TYPE SYNTAX INTEGER { default (1), top (2), bottom (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object applies only to SAPs defined on a port configured for qinq service encapsulation. It specifies which 802.1P bits will be used to match a QoS or a MAC filter policy when a double-tagged frame is received on this SAP." DEFVAL { default } ::= { sapTmplEntry 16 } sapTmplIngressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTmplIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified." DEFVAL { 0 } ::= { sapTmplEntry 17 } sapTmplEgressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTmplEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified." DEFVAL { 0 } ::= { sapTmplEntry 18 } sapTmplIngUseMultipointShared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of sapIngressSharedQueuePolicy is not null, the value of the object sapTmplIngUseMultipointShared specifies whether this SAP uses the multipoint-shared queues of the shared policy." DEFVAL { false } ::= { sapTmplEntry 19 } sapTmplEgressQinQMarkTopOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the encapsulation type of the access port where this SAP is defined is qinq, the value of the object sapTmplEgressQinQMarkTopOnly specifies which P-bits to mark during packet egress. When the value is false both set of P-bits are marked. When the value is true, only the P-bits in the top Q-tag are marked." DEFVAL { false } ::= { sapTmplEntry 20 } sapTmplEgressAggRateLimit OBJECT-TYPE SYNTAX TPortSchedulerAggRateLimitPIR UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object sapTmplEgressAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit. This object is obsoleted in 13.0 release and replaced by sapTmplEgrAggRateLimit." DEFVAL { -1 } ::= { sapTmplEntry 21 } sapTmplEgressFrameBasedAcctg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgressFrameBasedAcctg specifies whether to use frame-based accounting when evaluating sapTmplEgrAggRateLimit for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used." DEFVAL { false } ::= { sapTmplEntry 22 } sapTmplIngressAggRateLimit OBJECT-TYPE SYNTAX TPortSchedulerPIR UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object sapTmplIngressAggRateLimit specifies the maximum total rate of all ingress queues for this SAP. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release." DEFVAL { -1 } ::= { sapTmplEntry 23 } sapTmplIngPolicerPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplIngPolicerPolicy specifies the ingress policer control policy applicable." DEFVAL { ''H } ::= { sapTmplEntry 24 } sapTmplEgrPolicerPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgrPolicerPolicy specifies the egress policer control policy applicable." DEFVAL { ''H } ::= { sapTmplEntry 25 } sapTmplDot1agCfmMip OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplDot1agCfmMip specifies whether Maintenance Intermediate Points (MIP) will be created." DEFVAL { false } ::= { sapTmplEntry 26 } sapTmplCpmProtPolicyId OBJECT-TYPE SYNTAX TCpmProtPolicyIDOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplCpmProtPolicyId associates a CPM Protection policy with a SAP. A value of '-1' specifies that the system will determine the CPM Protection policy for this SAP." DEFVAL { -1 } ::= { sapTmplEntry 27 } sapTmplCpmProtMonitorMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be applied. If the value of sapTmplCpmProtMonitorMac is 'true', the per-source rate limit must be applied. The sapTmplCpmProtMonitorMac will be ignored if the system derived CPM Protection Policy from sapTmplCpmProtPolicyId is set to 'zero' for the instantiated SAP. At most one of sapTmplCpmProtMonitorMac and the sapTmplCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)' can be enabled for this template." DEFVAL { false } ::= { sapTmplEntry 28 } sapTmplCpmProtEthCfmMonitorFlags OBJECT-TYPE SYNTAX BITS { ethCfmMonitor (0), ethCfmMonitorAggregate (1), ethCfmMonitorCommittedAccessRate (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by a SAP created using this template. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on the SAP. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on the SAP. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the template's sapTmplCpmProtPolicyId. At most one of 'ethCfmMonitor(0)' and sapTmplCpmProtMonitorMac can be enabled for this template. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SAP, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SAP, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting." DEFVAL { {} } ::= { sapTmplEntry 29 } sapTmplEgrAggRateLUB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgrAggRateLUB specifies whether to limit the unused bandwidth and allow a tighter control in allocation of bandwidth by HQos. When the value of sapTmplEgrAggRateLUB is set to 'true', HQos algorithm distributes any unused aggregate bandwidth between queues operating below their fair share rates. This allows a simplified aggregate rate protection while allocating bandwidth by HQos scheduling algorithm." DEFVAL { false } ::= { sapTmplEntry 30 } sapTmplEthCfmSquelchIngress OBJECT-TYPE SYNTAX BITS { level0 (0), level1 (1), level2 (2), level3 (3), level4 (4), level5 (5), level6 (6), level7 (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEthCfmSquelchIngress specifies the ETH-CFM level or levels that are silently discarded on ingress to the SAP. Any received ETH-CFM PDU matching a level that has been set will be dropped without regard for any other ETH-CFM criteria. No statistical information or drop count will be available for any ETH-CFM PDU that is silently discarded by this option." DEFVAL { {} } ::= { sapTmplEntry 31 } sapTmplEgrAggRateLimitHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgrAggRateLimitHi specifies the upper 32 bits of the maximum total rate of all egress queues for this SAP. This value should always be set along with sapTmplEgrAggRateLimit, otherwise an 'inconsistentValue' error is returned. When the value of sapTmplEgrAggRateLimitHi along with the value of sapTmplEgrAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for this SAP indicates maximum total rate of all egress queues." DEFVAL { 4294967295 } ::= { sapTmplEntry 33 } sapTmplEgrAggRateLimit OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgrAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value of 4294967295 (0xFFFFFFFF) means that there is no limit. When the value of sapTmplEgrAggRateLimitHi along with the value of sapTmplEgrAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for this SAP indicates maximum total rate of all egress queues." DEFVAL { 4294967295 } ::= { sapTmplEntry 34 } sapTmplDCpuProtPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplDCpuProtPolicy associates Distributed CPU Protection Policy with a SAP template." DEFVAL { ''H } ::= { sapTmplEntry 35 } sapTmplIngressQosPolicyName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplIngressQosPolicyName specifies the ingress QoS policy name. When the value of this object, it set to non-default, the value of object sapTmplIngressQosPolicyId is ignored." DEFVAL { "" } ::= { sapTmplEntry 36 } sapTmplEgressQosPolicyName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgressQosPolicyName specifies the egress QoS policy name. When the value of this object, it set to non-default, the value of object sapTmplEgressQosPolicyId is ignored." DEFVAL { "" } ::= { sapTmplEntry 37 } sapTmplIngressIpFilterName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplIngressIpFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object sapTmplIngressIpFilterId is ignored." DEFVAL { "" } ::= { sapTmplEntry 38 } sapTmplIngressIpv6FilterName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplIngressIpv6FilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object sapTmplIngressIpv6FilterId is ignored." DEFVAL { "" } ::= { sapTmplEntry 39 } sapTmplIngressMacFilterName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplIngressMacFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object sapTmplIngressMacFilterId is ignored." DEFVAL { "" } ::= { sapTmplEntry 40 } sapTmplEgressIpFilterName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgressIpFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object sapTmplEgressIpFilterId is ignored." DEFVAL { "" } ::= { sapTmplEntry 41 } sapTmplEgressIpv6FilterName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgressIpv6FilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object sapTmplEgressIpv6FilterId is ignored." DEFVAL { "" } ::= { sapTmplEntry 42 } sapTmplEgressMacFilterName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEgressMacFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object sapTmplEgressMacFilterId is ignored." DEFVAL { "" } ::= { sapTmplEntry 43 } sapTmplEthCfmSquelchIngressCtag OBJECT-TYPE SYNTAX BITS { level0 (0), level1 (1), level2 (2), level3 (3), level4 (4), level5 (5), level6 (6), level7 (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTmplEthCfmSquelchIngressCtag specifies the ETH-CFM level or levels of the ETH-CFM PDUs that are silently discarded using additional VLAN space immediately following ingress service delineation. Any received ETH-CFM PDU matching a level that has been set will be dropped without regard for the vlan-id in that additional space. No statistical information or drop count will be available for any ETH-CFM PDU that is silently discarded by this option." DEFVAL { {} } ::= { sapTmplEntry 44 } sapTmplTlsTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTmplTlsTblLastChanged indicates the sysUpTime at the time of the last modification of sapTmplTlsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 103 } sapTmplTlsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTmplTlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains VPLS SAP template information." ::= { tmnxSapObjs 104 } sapTmplTlsEntry OBJECT-TYPE SYNTAX SapTmplTlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains basic information about a specific VPLS SAP template. An entry in this table is created when an entry is created in the sapTmplTable with sapTmplType set to 'tls'. Entry is deleted when corresponding entry is deleted in sapTmplTable." INDEX { sapTmplName } ::= { sapTmplTlsTable 1 } SapTmplTlsEntry ::= SEQUENCE { sapTmplTlsLastChanged TimeStamp, sapTmplTlsMacAgeing TmnxEnabledDisabled, sapTmplTlsStpAdminStatus TmnxEnabledDisabled, sapTmplTlsStpPriority Integer32, sapTmplTlsStpPathCost Integer32, sapTmplTlsStpRapidStart TmnxEnabledDisabled, sapTmplTlsStpBpduEncap INTEGER, sapTmplTlsMacAddressLimit Integer32, sapTmplTlsMacLearning TmnxEnabledDisabled, sapTmplTlsStpAdminPointToPoint INTEGER, sapTmplTlsStpAutoEdge TmnxEnabledDisabled, sapTmplTlsDiscardUnknownSource TmnxEnabledDisabled, sapTmplTlsL2ptTermination TmnxEnabledDisabled, sapTmplTlsBpduTranslation TlsBpduTranslation, sapTmplTlsStpRootGuard TruthValue, sapTmplTlsL2ptProtocols L2ptProtocols, sapTmplTlsLimitMacMove TlsLimitMacMove, sapTmplTlsLimitMacMoveLevel TlsLimitMacMoveLevel } sapTmplTlsLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTmplTlsLastChanged indicates the timestamp of last change to this row in sapTmplTlsTable." ::= { sapTmplTlsEntry 1 } sapTmplTlsMacAgeing OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsMacAgeing specifies whether the MAC aging process is enabled for this SAP template. The value will be ignored if MAC aging is disabled on service level." DEFVAL { enabled } ::= { sapTmplTlsEntry 2 } sapTmplTlsStpAdminStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsStpAdminStatus specifies whether this SAP participates in the TLS's Spanning Tree Protocol." DEFVAL { enabled } ::= { sapTmplTlsEntry 3 } sapTmplTlsStpPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240." DEFVAL { 128 } ::= { sapTmplTlsEntry 4 } sapTmplTlsStpPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port." DEFVAL { 10 } ::= { sapTmplTlsEntry 5 } sapTmplTlsStpRapidStart OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsStpRapidStart specifies whether Rapid Start is enabled on this SAP. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SAP are driven by the value of the 'HelloTime' instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state. This parameter is also referred to as 'adminEdge'. " DEFVAL { disabled } ::= { sapTmplTlsEntry 6 } sapTmplTlsStpBpduEncap OBJECT-TYPE SYNTAX INTEGER { dynamic (1), dot1d (2), pvst (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SAP." DEFVAL { dynamic } ::= { sapTmplTlsEntry 7 } sapTmplTlsMacAddressLimit OBJECT-TYPE SYNTAX Integer32 (0..511999) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB of this SAP. The value 0 means: no limit for this SAP." DEFVAL { 0 } ::= { sapTmplTlsEntry 8 } sapTmplTlsMacLearning OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsMacLearning specifies whether the MAC learning process is enabled for this SAP. The value is ignored if MAC learning is disabled on service level." DEFVAL { enabled } ::= { sapTmplTlsEntry 9 } sapTmplTlsStpAdminPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue (0), forceFalse (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sap. The value 'forceTrue' means that this port should always be treated as if it is connected to a point-to-point link. The value of 'forceFalse' means that this port should be treated as having a shared media connection." REFERENCE "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" DEFVAL { forceTrue } ::= { sapTmplTlsEntry 10 } sapTmplTlsStpAutoEdge OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "sapTmplTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol." DEFVAL { enabled } ::= { sapTmplTlsEntry 11 } sapTmplTlsDiscardUnknownSource OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "with the object sapTmplTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SAP. When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sapTmplTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead." DEFVAL { disabled } ::= { sapTmplTlsEntry 12 } sapTmplTlsL2ptTermination OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsL2ptTermination specifies whether received Layer 2 Protocol Tunnel (L2PT) PDUs are terminated on this port or sap." DEFVAL { disabled } ::= { sapTmplTlsEntry 13 } sapTmplTlsBpduTranslation OBJECT-TYPE SYNTAX TlsBpduTranslation MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsBpduTranslation specifies whether received L2 Protocol Tunnel PDUs are translated before being sent out on this port or sap." DEFVAL { disabled } ::= { sapTmplTlsEntry 14 } sapTmplTlsStpRootGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity." DEFVAL { false } ::= { sapTmplTlsEntry 15 } sapTmplTlsL2ptProtocols OBJECT-TYPE SYNTAX L2ptProtocols MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsL2ptProtocols specifies which L2 Protocol Tunnel PDUs are terminated on this port or sap." DEFVAL { {stp} } ::= { sapTmplTlsEntry 16 } sapTmplTlsLimitMacMove OBJECT-TYPE SYNTAX TlsLimitMacMove MAX-ACCESS read-write STATUS current DESCRIPTION "When sapTmplTlsLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on this SAP, and it will block it when the relearn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SAP will not be blocked, and another blockable SAP will be blocked instead." DEFVAL { blockable } ::= { sapTmplTlsEntry 17 } sapTmplTlsLimitMacMoveLevel OBJECT-TYPE SYNTAX TlsLimitMacMoveLevel MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTmplTlsLimitMacMoveLevel specifies the hierarchy in which SAPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)" DEFVAL { tertiary } ::= { sapTmplTlsEntry 18 } sapTlsEsVidGrpTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsEsVidGrpTblLastChanged indicates the sysUpTime at the time of the last modification of sapTlsEsVidGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 105 } sapTlsEsVidGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsEsVidGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TLS SAP specific Multiple VLAN Registration Protocol (MVRP) end-station VLAN range group information." ::= { tmnxSapObjs 106 } sapTlsEsVidGrpEntry OBJECT-TYPE SYNTAX SapTlsEsVidGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TLS SAP specific MVRP end-station VLAN range group information." INDEX { svcId, sapPortId, sapEncapValue, sapTlsEsVidGrpId } ::= { sapTlsEsVidGrpTable 1 } SapTlsEsVidGrpEntry ::= SEQUENCE { sapTlsEsVidGrpId TmnxVlanGroupId, sapTlsEsVidGrpRowStatus RowStatus, sapTlsEsVidGrpLastChgd TimeStamp, sapTlsEsVidGrpStartVlanTag QTag, sapTlsEsVidGrpEndVlanTag QTag } sapTlsEsVidGrpId OBJECT-TYPE SYNTAX TmnxVlanGroupId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapTlsEsVidGrpId specifies the MVRP end-station VLAN range group identifier. This identifier should be unique within this SAP domain." ::= { sapTlsEsVidGrpEntry 1 } sapTlsEsVidGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This value of the object sapTlsEsVidGrpRowStatus specifies the status of this row." ::= { sapTlsEsVidGrpEntry 2 } sapTlsEsVidGrpLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsEsVidGrpLastChgd indicates the timestamp of last change to this row in sapTlsEsVidGrpTable." ::= { sapTlsEsVidGrpEntry 3 } sapTlsEsVidGrpStartVlanTag OBJECT-TYPE SYNTAX QTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTlsEsVidGrpStartVlanTag specifies the start of the VLAN tag range. An 'inconsistentValue' error is returned if value of this object is not specified at the time of row creation." ::= { sapTlsEsVidGrpEntry 4 } sapTlsEsVidGrpEndVlanTag OBJECT-TYPE SYNTAX QTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapTlsEsVidGrpEndVlanTag specifies the end of the VLAN tag range. An 'inconsistentValue' error is returned if value of this object is not specified at the time of row creation." ::= { sapTlsEsVidGrpEntry 5 } sapTmplUserTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTmplUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAPs which are created using SAP templates." ::= { tmnxSapObjs 107 } sapTmplUserEntry OBJECT-TYPE SYNTAX SapTmplUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information about SAP created using a SAP template. Entries are created and deleted by the system." INDEX { sapTmplName, svcId, sapPortId, sapEncapValue } ::= { sapTmplUserTable 1 } SapTmplUserEntry ::= SEQUENCE { sapTmplUserCreationOrigin INTEGER, sapTmplUserCreatorSvcId TmnxServId } sapTmplUserCreationOrigin OBJECT-TYPE SYNTAX INTEGER { mVpls (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapTmplUserCreationOrigin indicates how this SAP was created using this specific SAP template." ::= { sapTmplUserEntry 1 } sapTmplUserCreatorSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapTmplUserCreatorSvcId indicates the service identifier which created this particular SAP using this template. A value of zero indicates that the SAP is not created by a service." ::= { sapTmplUserEntry 2 } sapIngQosArbitStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapIngQosArbitStatsTable contains ingress QoS arbiter statistics about SAPs. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip." ::= { tmnxSapObjs 108 } sapIngQosArbitStatsEntry OBJECT-TYPE SYNTAX SapIngQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains ingress statistics about a particular SAP QoS arbiter." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosArbitStatsName } ::= { sapIngQosArbitStatsTable 1 } SapIngQosArbitStatsEntry ::= SEQUENCE { sapIngQosArbitStatsName TNamedItem, sapIngQosArbitStatsFwdPkts Counter64, sapIngQosArbitStatsFwdPktsLo Counter32, sapIngQosArbitStatsFwdPktsHi Counter32, sapIngQosArbitStatsFwdOcts Counter64, sapIngQosArbitStatsFwdOctsLo Counter32, sapIngQosArbitStatsFwdOctsHi Counter32 } sapIngQosArbitStatsName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapIngQosArbitStatsName specifies the ingress QoS arbiter of this SAP." ::= { sapIngQosArbitStatsEntry 1 } sapIngQosArbitStatsFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress policer control policy, offered by the Pchip to the Qchip." ::= { sapIngQosArbitStatsEntry 2 } sapIngQosArbitStatsFwdPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosArbitStatsFwdPktsLo indicates the lower 32 bits of sapIngQosArbitStatsFwdPkts." ::= { sapIngQosArbitStatsEntry 3 } sapIngQosArbitStatsFwdPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosArbitStatsFwdPktsHi indicates the upper 32 bits of sapIngQosArbitStatsFwdPkts." ::= { sapIngQosArbitStatsEntry 4 } sapIngQosArbitStatsFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the SAP ingress policer control policy, offered by the Pchip to the Qchip." ::= { sapIngQosArbitStatsEntry 5 } sapIngQosArbitStatsFwdOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosArbitStatsFwdOctsLo indicates the lower 32 bits of sapIngQosArbitStatsFwdOcts." ::= { sapIngQosArbitStatsEntry 6 } sapIngQosArbitStatsFwdOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosArbitStatsFwdOctsHi indicates the upper 32 bits of sapIngQosArbitStatsFwdOcts." ::= { sapIngQosArbitStatsEntry 7 } sapEgrQosArbitStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrQosArbitStatsTable contains egress QoS arbiter statistics about SAPs. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip." ::= { tmnxSapObjs 109 } sapEgrQosArbitStatsEntry OBJECT-TYPE SYNTAX SapEgrQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains egress statistics about a particular SAP QoS arbiter." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosArbitStatsName } ::= { sapEgrQosArbitStatsTable 1 } SapEgrQosArbitStatsEntry ::= SEQUENCE { sapEgrQosArbitStatsName TNamedItem, sapEgrQosArbitStatsFwdPkts Counter64, sapEgrQosArbitStatsFwdPktsLo Counter32, sapEgrQosArbitStatsFwdPktsHi Counter32, sapEgrQosArbitStatsFwdOcts Counter64, sapEgrQosArbitStatsFwdOctsLo Counter32, sapEgrQosArbitStatsFwdOctsHi Counter32 } sapEgrQosArbitStatsName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrQosArbitStatsName specifies the egress QoS arbiter of this SAP." ::= { sapEgrQosArbitStatsEntry 1 } sapEgrQosArbitStatsFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the SAP egress policer control policy, offered by the Pchip to the Qchip." ::= { sapEgrQosArbitStatsEntry 2 } sapEgrQosArbitStatsFwdPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosArbitStatsFwdPktsLo indicates the lower 32 bits of sapEgrQosArbitStatsFwdPkts." ::= { sapEgrQosArbitStatsEntry 3 } sapEgrQosArbitStatsFwdPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosArbitStatsFwdPktsHi indicates the upper 32 bits of sapEgrQosArbitStatsFwdPkts." ::= { sapEgrQosArbitStatsEntry 4 } sapEgrQosArbitStatsFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the SAP egress policer control policy, offered by the Pchip to the Qchip." ::= { sapEgrQosArbitStatsEntry 5 } sapEgrQosArbitStatsFwdOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosArbitStatsFwdOctsLo indicates the lower 32 bits of sapEgrQosArbitStatsFwdOcts." ::= { sapEgrQosArbitStatsEntry 6 } sapEgrQosArbitStatsFwdOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosArbitStatsFwdOctsHi indicates the upper 32 bits of sapEgrQosArbitStatsFwdOcts." ::= { sapEgrQosArbitStatsEntry 7 } sapTlsMvrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsMvrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each VLAN managed by Multiple VLAN Registration Protocol (MVRP) on the SAP for the TLS. Entries are dynamically created and destroyed by the system as the VLANs are registered or declared in MVRP." ::= { tmnxSapObjs 110 } sapTlsMvrpEntry OBJECT-TYPE SYNTAX SapTlsMvrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVRP specific information about a VLANs managed by MVRP on a SAP in a TLS." INDEX { svcId, sapPortId, sapEncapValue, sapTlsMvrpVlanId } ::= { sapTlsMvrpTable 1 } SapTlsMvrpEntry ::= SEQUENCE { sapTlsMvrpVlanId Unsigned32, sapTlsMvrpDeclared TruthValue, sapTlsMvrpRegistered TruthValue, sapTlsMvrpEndStation TruthValue } sapTlsMvrpVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapTlsMvrpVlanId indicates a VLAN which is being managed by MVRP on this SAP." ::= { sapTlsMvrpEntry 1 } sapTlsMvrpDeclared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvrpDeclared indicates whether the MVRP applicant on this SAP is declaring this VLAN on behalf of MVRP." ::= { sapTlsMvrpEntry 2 } sapTlsMvrpRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvrpRegistered indicates whether the MVRP registrant on this SAP has notified MVRP of a registration of this VLAN." ::= { sapTlsMvrpEntry 3 } sapTlsMvrpEndStation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsMvrpEndStation indicates whether the MVRP registrant on this SAP is registered per end station." ::= { sapTlsMvrpEntry 4 } sapPortIdIngQosArbitStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapPortIdIngQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdIngQosArbitStatsTable contains ingress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS." ::= { tmnxSapObjs 111 } sapPortIdIngQosArbitStatsEntry OBJECT-TYPE SYNTAX SapPortIdIngQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the ingress statistics about a specific SAP's QoS queue. Entries are created when a arbiter policy is applied to a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapPortIdIngQosArbitName, sapPortIdIngPortId } ::= { sapPortIdIngQosArbitStatsTable 1 } SapPortIdIngQosArbitStatsEntry ::= SEQUENCE { sapPortIdIngQosArbitName TNamedItem, sapPortIdIngQosArbitFwdPkts Counter64, sapPortIdIngQosArbitFwdOcts Counter64, sapPortIdIngQosArbitFwdPktsLo Counter32, sapPortIdIngQosArbitFwdPktsHi Counter32, sapPortIdIngQosArbitFwdOctsLo Counter32, sapPortIdIngQosArbitFwdOctsHi Counter32 } sapPortIdIngQosArbitName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapPortIdIngQosArbitName is used as an index of the ingress QoS arbiter of this SAP." ::= { sapPortIdIngQosArbitStatsEntry 1 } sapPortIdIngQosArbitFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosArbitFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress arbiter policy, offered by the Pchip to the Qchip." ::= { sapPortIdIngQosArbitStatsEntry 2 } sapPortIdIngQosArbitFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosArbitFwdOcts indicates the number of forwarded octets,as determined by the SAP ingress arbiter policy, offered by the Pchip to the Qchip." ::= { sapPortIdIngQosArbitStatsEntry 3 } sapPortIdIngQosArbitFwdPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosArbitFwdPktsLo indicates the lower 32 bits of sapPortIdIngQosArbitFwdPkts." ::= { sapPortIdIngQosArbitStatsEntry 4 } sapPortIdIngQosArbitFwdPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosArbitFwdPktsHi indicates the upper 32 bits of sapPortIdIngQosArbitFwdPkts." ::= { sapPortIdIngQosArbitStatsEntry 5 } sapPortIdIngQosArbitFwdOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosArbitFwdOctsLo indicates the lower 32 bits of sapPortIdIngQosArbitFwdOcts." ::= { sapPortIdIngQosArbitStatsEntry 6 } sapPortIdIngQosArbitFwdOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdIngQosArbitFwdOctsHi indicates the upper 32 bits of sapPortIdIngQosArbitFwdOcts." ::= { sapPortIdIngQosArbitStatsEntry 7 } sapPortIdEgrQosArbitStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapPortIdEgrQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdEgrQosArbitStatsTable contains egress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS." ::= { tmnxSapObjs 112 } sapPortIdEgrQosArbitStatsEntry OBJECT-TYPE SYNTAX SapPortIdEgrQosArbitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the egress statistics about a specific SAP's QoS queue. Entries are created when a arbiter policy is applied to a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapPortIdEgrQosArbitName, sapPortIdEgrPortId } ::= { sapPortIdEgrQosArbitStatsTable 1 } SapPortIdEgrQosArbitStatsEntry ::= SEQUENCE { sapPortIdEgrQosArbitName TNamedItem, sapPortIdEgrQosArbitFwdPkts Counter64, sapPortIdEgrQosArbitFwdOcts Counter64, sapPortIdEgrQosArbitFwdPktsLo Counter32, sapPortIdEgrQosArbitFwdPktsHi Counter32, sapPortIdEgrQosArbitFwdOctsLo Counter32, sapPortIdEgrQosArbitFwdOctsHi Counter32 } sapPortIdEgrQosArbitName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapPortIdEgrQosArbitName is used as an index of the egress QoS arbiter of this SAP." ::= { sapPortIdEgrQosArbitStatsEntry 1 } sapPortIdEgrQosArbitFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosArbitFwdPkts indicates the number of forwarded packets, as determined by the SAP egress arbiter policy, offered by the Pchip to the Qchip." ::= { sapPortIdEgrQosArbitStatsEntry 2 } sapPortIdEgrQosArbitFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosArbitFwdOcts indicates the number of forwarded octets,as determined by the SAP egress arbiter policy, offered by the Pchip to the Qchip." ::= { sapPortIdEgrQosArbitStatsEntry 3 } sapPortIdEgrQosArbitFwdPktsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosArbitFwdPktsLo indicates the lower 32 bits of sapPortIdEgrQosArbitFwdPkts." ::= { sapPortIdEgrQosArbitStatsEntry 4 } sapPortIdEgrQosArbitFwdPktsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosArbitFwdPktsHi indicates the upper 32 bits of sapPortIdEgrQosArbitFwdPkts." ::= { sapPortIdEgrQosArbitStatsEntry 5 } sapPortIdEgrQosArbitFwdOctsLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosArbitFwdOctsLo indicates the lower 32 bits of sapPortIdEgrQosArbitFwdOcts." ::= { sapPortIdEgrQosArbitStatsEntry 6 } sapPortIdEgrQosArbitFwdOctsHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrQosArbitFwdOctsHi indicates the upper 32 bits of sapPortIdEgrQosArbitFwdOcts." ::= { sapPortIdEgrQosArbitStatsEntry 7 } tmnxGreTunnelTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxGreTunnelTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 113 } tmnxGreTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxGreTunnelEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Table to store the GRE Tunnel entries." ::= { tmnxSapObjs 114 } tmnxGreTunnelEntry OBJECT-TYPE SYNTAX TmnxGreTunnelEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information about a single GRE Tunnel entry." INDEX { svcId, sapPortId, sapEncapValue, tmnxGreTunnelName } ::= { tmnxGreTunnelTable 1 } TmnxGreTunnelEntry ::= SEQUENCE { tmnxGreTunnelName TNamedItem, tmnxGreTunnelRowStatus RowStatus, tmnxGreTunnelLastChanged TimeStamp, tmnxGreTunnelDstIpAddrType InetAddressType, tmnxGreTunnelDstIpAddr InetAddress, tmnxGreTunnelDescription TItemDescription, tmnxGreTunnelLclIpAddrType InetAddressType, tmnxGreTunnelLclIpAddr InetAddress, tmnxGreTunnelRemIpAddrType InetAddressType, tmnxGreTunnelRemIpAddr InetAddress, tmnxGreTunnelBackupRemIpAddrType InetAddressType, tmnxGreTunnelBackupRemIpAddr InetAddress, tmnxGreTunnelOperRemIpAddrType InetAddressType, tmnxGreTunnelOperRemIpAddr InetAddress, tmnxGreTunnelDeliverySvcId TmnxServId, tmnxGreTunnelAdminState TmnxAdminState, tmnxGreTunnelOperState TmnxOperState, tmnxGreTunnelOperFlags BITS, tmnxGreTunnelDscp TDSCPNameOrEmpty, tmnxGreTunnelReassembly Integer32, tmnxGreTunnelClearDfBit TruthValue, tmnxGreTunnelIpMtu Unsigned32, tmnxGreTunnelHostISA TmnxHwIndexOrZero } tmnxGreTunnelName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelName specifies the name of the tunnel and is part of the index for the table tmnxGreTunnelTable." ::= { tmnxGreTunnelEntry 1 } tmnxGreTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The tmnxGreTunnelRowStatus object is used to create and delete rows in the tmnxGreTunnelTable." ::= { tmnxGreTunnelEntry 2 } tmnxGreTunnelLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelLastChanged indicates the sysUpTime at the time of the last modification of this entry." ::= { tmnxGreTunnelEntry 3 } tmnxGreTunnelDstIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelDstIpAddrType specifies the address type of address in tmnxGreTunnelDstIpAddr. This object must be set at the time of creation of an entry." ::= { tmnxGreTunnelEntry 4 } tmnxGreTunnelDstIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelDstIpAddr specifies the address of the destination of this GRE tunnel. This object must be set at the time of creation of an entry." ::= { tmnxGreTunnelEntry 5 } tmnxGreTunnelDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelDescription specifies the user-provided description for each tmnxGreTunnelEntry in the table tmnxGreTunnelTable." DEFVAL { "" } ::= { tmnxGreTunnelEntry 6 } tmnxGreTunnelLclIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelLclIpAddrType specifies the address type of address in tmnxGreTunnelLclIpAddr." DEFVAL { unknown } ::= { tmnxGreTunnelEntry 7 } tmnxGreTunnelLclIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelLclIpAddr specifies the address of the local endpoint of this GRE tunnel." DEFVAL { ''H } ::= { tmnxGreTunnelEntry 8 } tmnxGreTunnelRemIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelRemIpAddrType specifies the address type of address in tmnxGreTunnelRemIpAddr." DEFVAL { unknown } ::= { tmnxGreTunnelEntry 9 } tmnxGreTunnelRemIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelRemIpAddr specifies the address of the remote endpoint of this GRE tunnel." DEFVAL { ''H } ::= { tmnxGreTunnelEntry 10 } tmnxGreTunnelBackupRemIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBackupRemIpAddrType specifies the address type of address in tmnxGreTunnelBackupRemIpAddr." DEFVAL { unknown } ::= { tmnxGreTunnelEntry 11 } tmnxGreTunnelBackupRemIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBackupRemIpAddr specifies the address of the backup remote endpoint of this GRE tunnel." DEFVAL { ''H } ::= { tmnxGreTunnelEntry 12 } tmnxGreTunnelOperRemIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelOperRemIpAddrType indicates the address type of address in tmnxGreTunnelOperRemIpAddr." ::= { tmnxGreTunnelEntry 13 } tmnxGreTunnelOperRemIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelOperRemIpAddr indicates the address of the operational remote endpoint of this GRE tunnel." ::= { tmnxGreTunnelEntry 14 } tmnxGreTunnelDeliverySvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelDeliverySvcId specifies the service-id of the tunnel delivery service." DEFVAL { 0 } ::= { tmnxGreTunnelEntry 15 } tmnxGreTunnelAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelAdminState specifies the administrative state of the tmnxGreTunnelEntry." DEFVAL { outOfService } ::= { tmnxGreTunnelEntry 16 } tmnxGreTunnelOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelOperState indicates the operational status of tmnxGreTunnelEntry." ::= { tmnxGreTunnelEntry 17 } tmnxGreTunnelOperFlags OBJECT-TYPE SYNTAX BITS { unresolvedLocalIp (0), tunnelAdminDown (1), sapDown (2), unresolvedDeliverySvc (3), reserved (4), remIpUnreachable (5), unresolvedDstIp (6) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelOperFlags indicates the reason why the tunnel is operationally down." ::= { tmnxGreTunnelEntry 18 } tmnxGreTunnelDscp OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelDscp specifies DSCP value which will be used in the GRE tunnel carrying IP header in the delivery service." DEFVAL { "" } ::= { tmnxGreTunnelEntry 19 } tmnxGreTunnelReassembly OBJECT-TYPE SYNTAX Integer32 (-1 | 0..5000) UNITS "milliseconds" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelReassembly specifies the maximum number of seconds to wait to receive all fragments of a particular IPSec or GRE packet for reassembly. The tmnxGreTunnelReassembly value set to zero indicates that reassembly is disabled. The tmnxGreTunnelReassembly value set default indicates that this value will be derived from the value of TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object. An 'inconsistentValue' error is returned if the value is not a multiple of 100 milliseconds." DEFVAL { -1 } ::= { tmnxGreTunnelEntry 20 } tmnxGreTunnelClearDfBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelClearDfBit specifies whether to clear Do not Fragment (DF) bit in the outgoing packets in this GRE tunnel." DEFVAL { false } ::= { tmnxGreTunnelEntry 21 } tmnxGreTunnelIpMtu OBJECT-TYPE SYNTAX Unsigned32 (0 | 512..9000) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelIpMtu specifies the MTU size for IP packets for this GRE tunnel. A value set to zero indicates maximum supported MTU size on the SAP for this GRE tunnel." DEFVAL { 0 } ::= { tmnxGreTunnelEntry 22 } tmnxGreTunnelHostISA OBJECT-TYPE SYNTAX TmnxHwIndexOrZero MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelHostISA indicates the active ISA that is being used to host this GRE tunnel. This object will have a value of zero when this tunnel is operationally down." ::= { tmnxGreTunnelEntry 23 } tmnxGreTunnelStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxGreTunnelStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Table to store GRE Tunnel statistics" ::= { tmnxSapObjs 115 } tmnxGreTunnelStatsEntry OBJECT-TYPE SYNTAX TmnxGreTunnelStatsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Statistics for a single GRE Tunnel." INDEX { svcId, sapPortId, sapEncapValue, tmnxGreTunnelName } ::= { tmnxGreTunnelStatsTable 1 } TmnxGreTunnelStatsEntry ::= SEQUENCE { tmnxGreTunnelPktsTx Counter64, tmnxGreTunnelPktsTxLo Counter32, tmnxGreTunnelPktsTxHi Counter32, tmnxGreTunnelPktsRx Counter64, tmnxGreTunnelPktsRxLo Counter32, tmnxGreTunnelPktsRxHi Counter32, tmnxGreTunnelBytesTx Counter64, tmnxGreTunnelBytesTxLo Counter32, tmnxGreTunnelBytesTxHi Counter32, tmnxGreTunnelBytesRx Counter64, tmnxGreTunnelBytesRxLo Counter32, tmnxGreTunnelBytesRxHi Counter32, tmnxGreTunnelTxErrors Counter32, tmnxGreTunnelRxErrors Counter32, tmnxGreTunnelKeyIgnoredRx Counter64, tmnxGreTunnelKeyIgnoredRxLo Counter32, tmnxGreTunnelKeyIgnoredRxHi Counter32, tmnxGreTunnelSeqIgnoredRx Counter64, tmnxGreTunnelSeqIgnoredRxLo Counter32, tmnxGreTunnelSeqIgnoredRxHi Counter32, tmnxGreTunnelVersUnsupRx Counter64, tmnxGreTunnelVersUnsupRxLo Counter32, tmnxGreTunnelVersUnsupRxHi Counter32, tmnxGreTunnelInvalidChksumRx Counter64, tmnxGreTunnelInvalidChksumRxLo Counter32, tmnxGreTunnelInvalidChksumRxHi Counter32, tmnxGreTunnelLoopsRx Counter64, tmnxGreTunnelLoopsRxLo Counter32, tmnxGreTunnelLoopsRxHi Counter32, tmnxGreTunnelTooBigTx Counter64, tmnxGreTunnelTooBigTxLo Counter32, tmnxGreTunnelTooBigTxHi Counter32 } tmnxGreTunnelPktsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelPktsTx indicates the number of packets this GRE Tunnel has sent." ::= { tmnxGreTunnelStatsEntry 1 } tmnxGreTunnelPktsTxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelPktsTxLo indicates lower 32 bits of the value of tmnxGreTunnelPktsTx object." ::= { tmnxGreTunnelStatsEntry 2 } tmnxGreTunnelPktsTxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelPktsTxHi indicates higher 32 bits of the value of tmnxGreTunnelPktsTx object." ::= { tmnxGreTunnelStatsEntry 3 } tmnxGreTunnelPktsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelPktsRx indicates the number of packets this GRE Tunnel has received." ::= { tmnxGreTunnelStatsEntry 4 } tmnxGreTunnelPktsRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelPktsRxLo indicates lower 32 bits of the value of tmnxGreTunnelPktsRx object." ::= { tmnxGreTunnelStatsEntry 5 } tmnxGreTunnelPktsRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelPktsRxHi indicates higher 32 bits of the value of tmnxGreTunnelPktsRx object." ::= { tmnxGreTunnelStatsEntry 6 } tmnxGreTunnelBytesTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBytesTx indicates the number of bytes this GRE Tunnel has sent." ::= { tmnxGreTunnelStatsEntry 7 } tmnxGreTunnelBytesTxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBytesTxLo indicates lower 32 bits of the value of tmnxGreTunnelBytesTx object." ::= { tmnxGreTunnelStatsEntry 8 } tmnxGreTunnelBytesTxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBytesTxHi indicates higher 32 bits of the value of tmnxGreTunnelBytesTx object." ::= { tmnxGreTunnelStatsEntry 9 } tmnxGreTunnelBytesRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBytesRx indicates the number of bytes this GRE Tunnel has received." ::= { tmnxGreTunnelStatsEntry 10 } tmnxGreTunnelBytesRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBytesRxLo indicates lower 32 bits of the value of tmnxGreTunnelBytesRx object." ::= { tmnxGreTunnelStatsEntry 11 } tmnxGreTunnelBytesRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelBytesRxHi indicates higher 32 bits of the value of tmnxGreTunnelBytesRx object." ::= { tmnxGreTunnelStatsEntry 12 } tmnxGreTunnelTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelTxErrors indicates the number of packet transmit errors." ::= { tmnxGreTunnelStatsEntry 13 } tmnxGreTunnelRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelRxErrors indicates the number of packet receive errors." ::= { tmnxGreTunnelStatsEntry 14 } tmnxGreTunnelKeyIgnoredRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelKeyIgnoredRx indicates the number of packets this GRE Tunnel received and processed ignoring key field." ::= { tmnxGreTunnelStatsEntry 15 } tmnxGreTunnelKeyIgnoredRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelKeyIgnoredRxLo indicates lower 32 bits of the value of tmnxGreTunnelKeyIgnoredRx object." ::= { tmnxGreTunnelStatsEntry 16 } tmnxGreTunnelKeyIgnoredRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelKeyIgnoredRxHi indicates higher 32 bits of the value of tmnxGreTunnelKeyIgnoredRx object." ::= { tmnxGreTunnelStatsEntry 17 } tmnxGreTunnelSeqIgnoredRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelSeqIgnoredRx indicates the number of packets this GRE Tunnel and processed ignoring sequence field." ::= { tmnxGreTunnelStatsEntry 18 } tmnxGreTunnelSeqIgnoredRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelSeqIgnoredRxLo indicates lower 32 bits of the value of tmnxGreTunnelSeqIgnoredRx object." ::= { tmnxGreTunnelStatsEntry 19 } tmnxGreTunnelSeqIgnoredRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelSeqIgnoredRxHi indicates higher 32 bits of the value of tmnxGreTunnelSeqIgnoredRx object." ::= { tmnxGreTunnelStatsEntry 20 } tmnxGreTunnelVersUnsupRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelVersUnsupRx indicates the number of packets this GRE Tunnel received with unsupported GRE version and were dropped." ::= { tmnxGreTunnelStatsEntry 21 } tmnxGreTunnelVersUnsupRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelVersUnsupRxLo indicates lower 32 bits of the value of tmnxGreTunnelVersUnsupRx object." ::= { tmnxGreTunnelStatsEntry 22 } tmnxGreTunnelVersUnsupRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelVersUnsupRxHi indicates higher 32 bits of the value of tmnxGreTunnelVersUnsupRx object." ::= { tmnxGreTunnelStatsEntry 23 } tmnxGreTunnelInvalidChksumRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelInvalidChksumRx indicates the number of packets this GRE Tunnel received with invalid checksum and were dropped." ::= { tmnxGreTunnelStatsEntry 24 } tmnxGreTunnelInvalidChksumRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelInvalidChksumRxLo indicates lower 32 bits of the value of tmnxGreTunnelInvalidChksumRx object." ::= { tmnxGreTunnelStatsEntry 25 } tmnxGreTunnelInvalidChksumRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelInvalidChksumRxHi indicates higher 32 bits of the value of tmnxGreTunnelInvalidChksumRx object." ::= { tmnxGreTunnelStatsEntry 26 } tmnxGreTunnelLoopsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelLoopsRx indicates the number of packets this GRE Tunnel received with payload with destination address which could result in a loop and were dropped." ::= { tmnxGreTunnelStatsEntry 27 } tmnxGreTunnelLoopsRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelLoopsRxLo indicates lower 32 bits of the value of tmnxGreTunnelLoopsRx object." ::= { tmnxGreTunnelStatsEntry 28 } tmnxGreTunnelLoopsRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelLoopsRxHi indicates higher 32 bits of the value of tmnxGreTunnelLoopsRx object." ::= { tmnxGreTunnelStatsEntry 29 } tmnxGreTunnelTooBigTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelTooBigTx indicates the number of packets this GRE Tunnel received which were too big to transmit." ::= { tmnxGreTunnelStatsEntry 30 } tmnxGreTunnelTooBigTxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelTooBigTxLo indicates lower 32 bits of the value of tmnxGreTunnelTooBigTx object." ::= { tmnxGreTunnelStatsEntry 31 } tmnxGreTunnelTooBigTxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxGreTunnelTooBigTxHi indicates higher 32 bits of the value of tmnxGreTunnelTooBigTx object." ::= { tmnxGreTunnelStatsEntry 32 } sapAtmVcRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF SapAtmVcRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapAtmVcRangeTable contains ATM Virtual Circuit ranges for ATM Capture SAPs. Entries in this table can be created or deleted via SNMP operations. For a given ATM Capture SAP, the maximum number of ATM VC ranges is limited to 5." ::= { tmnxSapObjs 116 } sapAtmVcRangeEntry OBJECT-TYPE SYNTAX SapAtmVcRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents an ATM Virtual Circuit range." INDEX { svcId, sapPortId, sapEncapValue, sapAtmVcRangeIndex } ::= { sapAtmVcRangeTable 1 } SapAtmVcRangeEntry ::= SEQUENCE { sapAtmVcRangeIndex Unsigned32, sapAtmVcRangeRowStatus RowStatus, sapAtmVcRangeLastMgmtChange TimeStamp, sapAtmVcRangeVpiStart AtmVpIdentifier, sapAtmVcRangeVpiEnd AtmVpIdentifier, sapAtmVcRangeVciStart AtmVcIdentifier, sapAtmVcRangeVciEnd AtmVcIdentifier } sapAtmVcRangeIndex OBJECT-TYPE SYNTAX Unsigned32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapAtmVcRangeIndex specifies the identifier of this ATM Virtual Circuit Range." ::= { sapAtmVcRangeEntry 1 } sapAtmVcRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapAtmVcRangeRowStatus specifies the row status of this row." ::= { sapAtmVcRangeEntry 2 } sapAtmVcRangeLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapAtmVcRangeLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { sapAtmVcRangeEntry 3 } sapAtmVcRangeVpiStart OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapAtmVcRangeVpiStart specifies the start Virtual Path Identifier (VPI) of this range." ::= { sapAtmVcRangeEntry 4 } sapAtmVcRangeVpiEnd OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapAtmVcRangeVpiEnd specifies the end Virtual Path Identifier (VPI) of this range." ::= { sapAtmVcRangeEntry 5 } sapAtmVcRangeVciStart OBJECT-TYPE SYNTAX AtmVcIdentifier (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapAtmVcRangeVciStart specifies the start Virtual Circuit Identifier (VCI) of this range." ::= { sapAtmVcRangeEntry 6 } sapAtmVcRangeVciEnd OBJECT-TYPE SYNTAX AtmVcIdentifier (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapAtmVcRangeVciEnd specifies the end Virtual Circuit Identifier (VCI) of this range." ::= { sapAtmVcRangeEntry 7 } msapAtmPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF MsapAtmPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The msapAtmPlcyTable has an entry for each managed SAP (MSAP) policy configured in the system." ::= { tmnxSapObjs 117 } msapAtmPlcyEntry OBJECT-TYPE SYNTAX MsapAtmPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the ATM-related configuration for a managed SAP (MSAP) policy. Entries in this table are created and destroyed automatically by the system." AUGMENTS { msapPlcyEntry } ::= { msapAtmPlcyTable 1 } MsapAtmPlcyEntry ::= SEQUENCE { msapAtmPlcyLastChanged TimeStamp, msapAtmPlcyIngTrafficDescIndex AtmTrafficDescrParamIndex, msapAtmPlcyEgrTrafficDescIndex AtmTrafficDescrParamIndex, msapAtmPlcyOamAlarmCellHandling ServiceAdminStatus, msapAtmPlcyOamPeriodicLoopback ServiceAdminStatus } msapAtmPlcyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapAtmPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { msapAtmPlcyEntry 1 } msapAtmPlcyIngTrafficDescIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex (1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapAtmPlcyIngTrafficDescIndex specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used for the ingress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification." DEFVAL { 1 } ::= { msapAtmPlcyEntry 2 } msapAtmPlcyEgrTrafficDescIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex (1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapAtmPlcyEgrTrafficDescIndex specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used for the egress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification." DEFVAL { 1 } ::= { msapAtmPlcyEntry 3 } msapAtmPlcyOamAlarmCellHandling OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapAtmPlcyOamAlarmCellHandling specifies the administrative state of the OAM Alarm Cell handling. A value of 'up' specifies that the OAM status of a PVC (Permanent Virtual Circuit) affects the MSAP operational status and OAM AIS/RDI cell generation upon an MSAP operational status of down. A value of 'down' specifies that the OAM status of a PVC will not affect the operational status of the associated MSAP and no OAM AIS/RDI cells are generated." DEFVAL { up } ::= { msapAtmPlcyEntry 4 } msapAtmPlcyOamPeriodicLoopback OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapAtmPlcyOamPeriodicLoopback specifies if the MSAP will run periodic OAM loopbacks. If enabled, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod; if a response is not received and tAtmSysOamRetryDown consecutive retries also result in failure, the endpoint will transition to the eteAisLoc state; once in the eteAisLoc state, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod; if a response is received for the periodic loopback and tAtmSysOamRetryUp consecutive retries also each receive a response, the endpoint will transition back to the up state." DEFVAL { down } ::= { msapAtmPlcyEntry 5 } msapAtmPlcyTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of msapAtmPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapAtmPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 118 } sapEthCfmTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEthCfmTblLastChanged indicates the sysUpTime at the time of the last modification of the sapEthCfmTable." ::= { tmnxSapObjs 119 } sapEthCfmTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEthCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEthCfmTable consists of the information pertaining to Ethernet Connectivity Fault Management (CFM) for Service Access Points (SAPs). This table is a sparse dependent extension of the sapBaseInfoTable." ::= { tmnxSapObjs 120 } sapEthCfmEntry OBJECT-TYPE SYNTAX SapEthCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEthCfmEntry contains the Ethernet CFM information for a given Ethernet encapsulated SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapEthCfmTable 1 } SapEthCfmEntry ::= SEQUENCE { sapEthCfmRowLastChanged TimeStamp, sapEthCfmTunnelFaultNotification INTEGER, sapEthCfmMcLagPropHoldTimeRemain Unsigned32, sapEthCfmAisEnable TruthValue, sapEthCfmVMepFilter TruthValue, sapEthCfmSquelchIngress BITS, sapEthCfmCollectLmmStats TruthValue, sapEthCfmCollLmmFcSts TFCSet, sapEthCfmCollLmmFcStsInP TFCSet, sapEthCfmSquelchIngressCtag BITS } sapEthCfmRowLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEthCfmRowLastChanged indicates the sysUpTime at the time of the last modification to an object for this row. If no changes were made to the entry since the instantiation of the row, then this object contains a zero value." ::= { sapEthCfmEntry 1 } sapEthCfmTunnelFaultNotification OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), accept (1), ignore (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmTunnelFaultNotification specifies whether the SAP will 'accept (1)' CFM fault notifications from a Tunnel MEP and process the notifications (i.e. do fault handling and/or fault propagation), or 'ignore (2)' the notification. Both TIMETRA-SERV-MIB::svcEthCfmTunnelFaultNotification and this object MUST be set to 'accept (1)' for the SAP to process the notification. The value 'notApplicable (0)' is used by the system to represent a SAP which supports ETH-CFM, but not this object. An SNMP Set attempting to change this object to this value will result in an wrongValue error." DEFVAL { accept } ::= { sapEthCfmEntry 2 } sapEthCfmMcLagPropHoldTimeRemain OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEthCfmMcLagPropHoldTimeRemain indicates the remaining time, in seconds, until MEPs on this SAP will react to a Multi-Chassis LAG protocol or port change. The value zero (0) indicates there are no pending events, or the SAP is not a MC-LAG SAP. This object corresponds to the global configuration timer: TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime." ::= { sapEthCfmEntry 3 } sapEthCfmAisEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmAisEnable specifies whether or not AIS frames are generated for the SAP based on a facility fault." DEFVAL { false } ::= { sapEthCfmEntry 4 } sapEthCfmVMepFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmVMepFilter specifies whether ETH-CFM PDUs egressing the sap or sdp-binding at the same level or lower than that of the configured service MEP (the virtual MEP) should be discarded or continue to egress. Only PDUs that were originated from the virtual MEP or from the networks side of the service will be affected, local down MEP ETH-CFM transmission are not. When set to 'true' ETH-CFM PDUs with the same or lower level as the virtual MEP will be discarded. When set to 'false', egressing ETH-CFM PDUs will pass freely as per the existing ETH-CFM configuration." DEFVAL { false } ::= { sapEthCfmEntry 5 } sapEthCfmSquelchIngress OBJECT-TYPE SYNTAX BITS { level0 (0), level1 (1), level2 (2), level3 (3), level4 (4), level5 (5), level6 (6), level7 (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmSquelchIngress specifies the ETH-CFM level or levels that are silently discarded on ingress to the SAP. Any received ETH-CFM PDU matching a level that has been set will be dropped without regard for any other ETH-CFM criteria. No statistical information or drop count will be available for any ETH-CFM PDU that is silently discarded by this option." DEFVAL { {} } ::= { sapEthCfmEntry 6 } sapEthCfmCollectLmmStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmCollectLmmStats specifies whether or not to compute the Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame counters for the specified SAP. Note that when sapEthCfmCollectLmmStats is set to 'true', all data traffic regardless of forwarding class level, both in and out of profile, will be aggregated to a single stat counter. Configuration of sapEthCfmCollectLmmStats is mutually exclusive with the forwarding class level aware objects sapEthCfmCollLmmFcSts and sapEthCfmCollLmmFcStsInP. The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus." REFERENCE "ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'." DEFVAL { false } ::= { sapEthCfmEntry 7 } sapEthCfmCollLmmFcSts OBJECT-TYPE SYNTAX TFCSet MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmCollLmmFcSts specifies which forwarding class levels (in and out of profile combined) have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame counters for the specified SAP. If the bit corresponding to a forwarding class level is set, then a unique counter will be used to track all the combined in and out of profile traffic associated with that forwarding class. Note that no sapEthCfmCollLmmFcSts bits can be set if sapEthCfmCollectLmmStats is set to 'true' as the two are mutually exclusive. The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus." REFERENCE "ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'." DEFVAL { {} } ::= { sapEthCfmEntry 8 } sapEthCfmCollLmmFcStsInP OBJECT-TYPE SYNTAX TFCSet MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmCollLmmFcStsInP specifies which forwarding class levels (in profile only) have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame counters for the specified SAP. If the bit corresponding to a forwarding class level is set, then a unique counter will be used to track only all the in profile data traffic that is associated with that forwarding class. Note that no sapEthCfmCollLmmFcStsInP bits can be set if sapEthCfmCollectLmmStats is set to 'true' as the two are mutually exclusive. The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus." REFERENCE "ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'." DEFVAL { {} } ::= { sapEthCfmEntry 9 } sapEthCfmSquelchIngressCtag OBJECT-TYPE SYNTAX BITS { level0 (0), level1 (1), level2 (2), level3 (3), level4 (4), level5 (5), level6 (6), level7 (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEthCfmSquelchIngressCtag specifies the ETH-CFM level or levels of the ETH-CFM PDUs that are silently discarded using additional VLAN space immediately following ingress service delineation. Any received ETH-CFM PDU matching a level that has been set will be dropped without regard for the vlan-id in that additional space. No statistical information or drop count will be available for any ETH-CFM PDU that is silently discarded by this option." DEFVAL { {} } ::= { sapEthCfmEntry 10 } sapEgrEncapGroupTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapEgrEncapGroupTblLastChgd indicates the timestamp of last change to the sapEgrEncapGroupTable." ::= { tmnxSapObjs 121 } sapEgrEncapGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEncapGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP egress encapsulation group information." ::= { tmnxSapObjs 122 } sapEgrEncapGroupEntry OBJECT-TYPE SYNTAX SapEgrEncapGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Encapsulation group information about a specific group of the SAP on the egress side." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName } ::= { sapEgrEncapGroupTable 1 } SapEgrEncapGroupEntry ::= SEQUENCE { sapEgrEncapGroupName TNamedItem, sapEgrEncapGroupRowStatus RowStatus, sapEgrEncapGroupLastChanged TimeStamp, sapEgrEncapGroupType TSapEgrEncapGroupType, sapEgrEncapGroupQosPerMember TruthValue, sapEgrEncapGroupQosPolicyId TSapEgrEncapGrpQosPolicyIdOrZero, sapEgrEncapGroupSchedulerPolicy TNamedItemOrEmpty, sapEgrEncapGroupAggRateLimit TPortSchedulerAggRateLimitPIR, sapEgrEncapGrpFrameBasedAccnt TruthValue, sapEgrEncapGroupAggRateLUB TruthValue, sapEgrEncapGrpAggRateLimitHi TmnxQosRateHigh32, sapEgrEncapGrpAggRateLimit TmnxQosRateLow32 } sapEgrEncapGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEncapGroupName indicates the encapsulation group name on this SAP." ::= { sapEgrEncapGroupEntry 1 } sapEgrEncapGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Row Status of the entry. This allows creation/deletion of rows in this table. To create row entries in this table sapEgrEncapGroupType MUST be specified in the same SNMP SET PDU request as sapEgrEncapGroupRowStatus or a 'noCreation' error is returned." ::= { sapEgrEncapGroupEntry 2 } sapEgrEncapGroupLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapEgrEncapGroupLastChanged indicates the timestamp of last change to this row in sapEgrEncapGroupTable." ::= { sapEgrEncapGroupEntry 3 } sapEgrEncapGroupType OBJECT-TYPE SYNTAX TSapEgrEncapGroupType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGroupType specifies the encapsulation group type configured on this SAP on egress side. To create row entries in this table sapEgrEncapGroupType MUST be specified in the same SNMP SET PDU request as sapEgrEncapGroupRowStatus or a 'noCreation' error is returned." ::= { sapEgrEncapGroupEntry 4 } sapEgrEncapGroupQosPerMember OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGroupQosPerMember specifies how the QoS members will be added to or deleted from the encapsulation group. If the value of sapEgrEncapGroupQosPerMember is set to 'true', members are added or deleted one at a time. If the value of sapEgrEncapGroupQosPerMember is set to 'false', members are added to the encapsulation group as a range of contiguous values." DEFVAL { false } ::= { sapEgrEncapGroupEntry 5 } sapEgrEncapGroupQosPolicyId OBJECT-TYPE SYNTAX TSapEgrEncapGrpQosPolicyIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGroupQosPolicyId specifies the QoS policy id of the encapsulation group on this SAP on egress side. The value '0' for sapEgrEncapGroupQosPolicyId means that there is no QoS policy." DEFVAL { 0 } ::= { sapEgrEncapGroupEntry 6 } sapEgrEncapGroupSchedulerPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGroupSchedulerPolicy specifies the name of the encapsulation group scheduler policy on this SAP on egress side." DEFVAL { "" } ::= { sapEgrEncapGroupEntry 7 } sapEgrEncapGroupAggRateLimit OBJECT-TYPE SYNTAX TPortSchedulerAggRateLimitPIR UNITS "kilobps" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the object sapEgrEncapGroupAggRateLimit specifies the maximum total rate of all egress encapsulation groups for this SAP. The value '-1' for sapEgrEncapGroupAggRateLimit means that there is no limit. This object is obsoleted in 13.0 release and replaced by sapEgrEncapGrpAggRateLimit." DEFVAL { -1 } ::= { sapEgrEncapGroupEntry 8 } sapEgrEncapGrpFrameBasedAccnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGrpFrameBasedAccnt specifies whether to use frame-based accounting when evaluating sapEgrEncapGrpAggRateLimit for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used." DEFVAL { false } ::= { sapEgrEncapGroupEntry 9 } sapEgrEncapGroupAggRateLUB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGroupAggRateLUB specifies whether to limit the unused bandwidth and allow a tighter control in allocation of bandwidth by HQos. When the value of sapEgrEncapGroupAggRateLUB is set to 'true', HQos algorithm distributes any unused aggregate bandwidth between queues operating below their fair share rates. This allows a simplified aggregate rate protection while allocating bandwidth by HQos scheduling algorithm." DEFVAL { false } ::= { sapEgrEncapGroupEntry 10 } sapEgrEncapGrpAggRateLimitHi OBJECT-TYPE SYNTAX TmnxQosRateHigh32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGrpAggRateLimitHi specifies the upper 32 bits of the maximum total rate of all egress encapsulation groups for this SAP. This value should always be set along with sapEgrEncapGrpAggRateLimit, otherwise an 'inconsistentValue' error is returned. When the value of sapEgrEncapGrpAggRateLimitHi along with the value of sapEgrEncapGrpAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for this SAP indicates maximum total rate." DEFVAL { 4294967295 } ::= { sapEgrEncapGroupEntry 12 } sapEgrEncapGrpAggRateLimit OBJECT-TYPE SYNTAX TmnxQosRateLow32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrEncapGrpAggRateLimit specifies the maximum total rate of all egress encapsulation groups for this SAP. The value of 4294967295 (0xFFFFFFFF) means that there is no limit. When the value of sapEgrEncapGrpAggRateLimitHi along with the value of sapEgrEncapGrpAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for this SAP indicates maximum total rate." DEFVAL { 4294967295 } ::= { sapEgrEncapGroupEntry 13 } sapEgrEncapGrpMemActTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sapEgrEncapGrpMemActTblLastChgd indicates the timestamp of last change to the sapEgrEncapGrpMemberActTable." ::= { tmnxSapObjs 123 } sapEgrEncapGrpMemberActTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEncapGrpMemberActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sapEgrEncapGrpMemberActTable creates or deletes one or more SAP egress encapsulation group member row entries in the sapEgrEncapGrpMemberTable by setting a single row in this table. An SNMP GET on this table will always return a 'noSuchInstance' error." ::= { tmnxSapObjs 124 } sapEgrEncapGrpMemberActEntry OBJECT-TYPE SYNTAX SapEgrEncapGrpMemberActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Encapsulation group member action information about a specific or a range of groups of the SAP on the egress side. To create/delete row entries in the sapEgrEncapGrpMemberTable objects sapEgrEncapGroupBeginMember, sapEgrEncapGroupEndMember and sapEgrEncapGroupMemberAction MUST all be specified in the same SNMP SET PDU request or a 'noCreation' error is returned. To create/delete a single row entry in the sapEgrEncapGrpMemberTable sapEgrEncapGroupEndMember MUST be same as sapEgrEncapGroupBeginMember." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName } ::= { sapEgrEncapGrpMemberActTable 1 } SapEgrEncapGrpMemberActEntry ::= SEQUENCE { sapEgrEncapGroupBeginMember SvcISID, sapEgrEncapGroupEndMember SvcISID, sapEgrEncapGroupMemberAction TSapEgrEncapGroupActionType } sapEgrEncapGroupBeginMember OBJECT-TYPE SYNTAX SvcISID MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapEgrEncapGroupBeginMember specifies the single encapsulation member identifier or the start value of encapsulation member identifier range." ::= { sapEgrEncapGrpMemberActEntry 1 } sapEgrEncapGroupEndMember OBJECT-TYPE SYNTAX SvcISID MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapEgrEncapGroupEndMember specifies the end value of encapsulation member identifier range. The value of sapEgrEncapGroupEndMember MUST be greater than that of sapEgrEncapGroupBeginMember." ::= { sapEgrEncapGrpMemberActEntry 2 } sapEgrEncapGroupMemberAction OBJECT-TYPE SYNTAX TSapEgrEncapGroupActionType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapEgrEncapGroupMemberAction specifies whether members of encapsulation group are created or destroyed. An 'inconsistentValue' error is returned if sapEgrEncapGroupMemberAction is set and sapEgrEncapGroupBeginMember or sapEgrEncapGroupEndMember is not set. An 'inconsistentValue' error is returned if sapEgrEncapGroupEndMember is set to a value smaller than sapEgrEncapGroupBeginMember." ::= { sapEgrEncapGrpMemberActEntry 3 } sapEgrEncapGrpMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEncapGrpMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP egress encapsulation group member entry information. The row entries in this table are created or destroyed by SNMP SET operations on sapEgrEncapGrpMemberActTable." ::= { tmnxSapObjs 126 } sapEgrEncapGrpMemberEntry OBJECT-TYPE SYNTAX SapEgrEncapGrpMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Encapsulation group member entry information about a specific group of the SAP on the egress side." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapEgrEncapGrpMember } ::= { sapEgrEncapGrpMemberTable 1 } SapEgrEncapGrpMemberEntry ::= SEQUENCE { sapEgrEncapGrpMember SvcISID, sapEgrEncapGrpRangeEndId SvcISID, sapEgrEncapGrpMemberLastChanged TimeStamp } sapEgrEncapGrpMember OBJECT-TYPE SYNTAX SvcISID (0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrEncapGrpMember indicates the encapsulation member identifier of the SAP on the egress side." ::= { sapEgrEncapGrpMemberEntry 1 } sapEgrEncapGrpRangeEndId OBJECT-TYPE SYNTAX SvcISID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEncapGrpRangeEndId indicates the end value of encapsulation member identifier range. When the encapsulation group's qos-per-member object is set to true, the value of sapEgrEncapGrpRangeEndId is always equal to the sapEgrEncapGrpMember. This is because member ranges are not supported when qos-per-member is enabled." ::= { sapEgrEncapGrpMemberEntry 2 } sapEgrEncapGrpMemberLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEncapGrpMemberLastChanged indicates the timestamp of last change to this row in sapEgrEncapGrpMemberEntry." ::= { sapEgrEncapGrpMemberEntry 3 } sapAtmPppStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapAtmPppStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ATM SAP PPP statistics information." ::= { tmnxSapObjs 127 } sapAtmPppStatsEntry OBJECT-TYPE SYNTAX SapAtmPppStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PPP statistics about a specific ATM SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapAtmPppStatsTable 1 } SapAtmPppStatsEntry ::= SEQUENCE { sapAtmPppStatsRxPackets Counter32, sapAtmPppStatsRxDropped Counter32, sapAtmPppStatsTxPackets Counter32 } sapAtmPppStatsRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapAtmPppStatsRxPackets indicates the number of PPP packets received on this ATM SAP since the last re-initialization of the local network management subsystem, or the last time the statistics were cleared." ::= { sapAtmPppStatsEntry 1 } sapAtmPppStatsRxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapAtmPppStatsRxDropped indicates the number of PPP packets dropped on this ATM SAP since the last re-initialization of the local network management subsystem, or the last time the statistics were cleared." ::= { sapAtmPppStatsEntry 2 } sapAtmPppStatsTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapAtmPppStatsTxPackets indicates the number of PPP packets transmitted on this ATM SAP since the last re-initialization of the local network management subsystem, or the last time the statistics were cleared." ::= { sapAtmPppStatsEntry 3 } tmnxSapGlobalObjs OBJECT IDENTIFIER ::= { tmnxSapObjs 128 } tmnxSapGreTunnelCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapGreTunnelCount indicates the number of GRE tunnels operating in the system at this time." ::= { tmnxSapGlobalObjs 1 } sapEgrEGBaseStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEGBaseStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGBaseStTable contains egress Encap Group basic SAP statistics at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember. In the descriptions below 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip." ::= { tmnxSapObjs 129 } sapEgrEGBaseStEntry OBJECT-TYPE SYNTAX SapEgrEGBaseStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific Encap Group of a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName } ::= { sapEgrEGBaseStTable 1 } SapEgrEGBaseStEntry ::= SEQUENCE { sapEgrEGBaseStLastClearedTime TimeStamp, sapEgrEGBaseStCustId TmnxCustId, sapEgrEGBaseStQcDpdInPfPkts Counter64, sapEgrEGBaseStQcDpdInPfPktsL Counter32, sapEgrEGBaseStQcDpdInPfPktsH Counter32, sapEgrEGBaseStQcDpdInPfOcts Counter64, sapEgrEGBaseStQcDpdInPfOctsL Counter32, sapEgrEGBaseStQcDpdInPfOctsH Counter32, sapEgrEGBaseStQcDpdOutPfPkts Counter64, sapEgrEGBaseStQcDpdOutPfPktsL Counter32, sapEgrEGBaseStQcDpdOutPfPktsH Counter32, sapEgrEGBaseStQcDpdOutPfOcts Counter64, sapEgrEGBaseStQcDpdOutPfOctsL Counter32, sapEgrEGBaseStQcDpdOutPfOctsH Counter32, sapEgrEGBaseStQcFwdInPfPkts Counter64, sapEgrEGBaseStQcFwdInPfPktsL Counter32, sapEgrEGBaseStQcFwdInPfPktsH Counter32, sapEgrEGBaseStQcFwdInPfOcts Counter64, sapEgrEGBaseStQcFwdInPfOctsL Counter32, sapEgrEGBaseStQcFwdInPfOctsH Counter32, sapEgrEGBaseStQcFwdOutPfPkts Counter64, sapEgrEGBaseStQcFwdOutPfPktsL Counter32, sapEgrEGBaseStQcFwdOutPfPktsH Counter32, sapEgrEGBaseStQcFwdOutPfOcts Counter64, sapEgrEGBaseStQcFwdOutPfOctsL Counter32, sapEgrEGBaseStQcFwdOutPfOctsH Counter32 } sapEgrEGBaseStLastClearedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStLastClearedTime indicates the sysUpTime when the counters in this table were last cleared." ::= { sapEgrEGBaseStEntry 1 } sapEgrEGBaseStCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStCustId indicates the Customer ID for the associated service." ::= { sapEgrEGBaseStEntry 2 } sapEgrEGBaseStQcDpdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdInPfPkts indicates the number of in-profile packets dropped by the egress Qchip due to: SAP state,egress MAC, IP or IPv6 filter, same segment discard,bad checksum, etc." ::= { sapEgrEGBaseStEntry 3 } sapEgrEGBaseStQcDpdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdInPfPkts." ::= { sapEgrEGBaseStEntry 4 } sapEgrEGBaseStQcDpdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdInPfPkts." ::= { sapEgrEGBaseStEntry 5 } sapEgrEGBaseStQcDpdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdInPfOcts indicates the number of in-profile octets dropped by the egress Qchip due to: SAP state, egress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc." ::= { sapEgrEGBaseStEntry 6 } sapEgrEGBaseStQcDpdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdInPfOcts." ::= { sapEgrEGBaseStEntry 7 } sapEgrEGBaseStQcDpdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdInPfOcts." ::= { sapEgrEGBaseStEntry 8 } sapEgrEGBaseStQcDpdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGBaseStEntry 9 } sapEgrEGBaseStQcDpdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdOutPfPkts." ::= { sapEgrEGBaseStEntry 10 } sapEgrEGBaseStQcDpdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdOutPfPkts." ::= { sapEgrEGBaseStEntry 11 } sapEgrEGBaseStQcDpdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGBaseStEntry 12 } sapEgrEGBaseStQcDpdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdOutPfOcts." ::= { sapEgrEGBaseStEntry 13 } sapEgrEGBaseStQcDpdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcDpdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdOutPfOcts." ::= { sapEgrEGBaseStEntry 14 } sapEgrEGBaseStQcFwdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrEGBaseStEntry 15 } sapEgrEGBaseStQcFwdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdInPfPkts." ::= { sapEgrEGBaseStEntry 16 } sapEgrEGBaseStQcFwdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdInPfPkts." ::= { sapEgrEGBaseStEntry 17 } sapEgrEGBaseStQcFwdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrEGBaseStEntry 18 } sapEgrEGBaseStQcFwdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdInPfOcts." ::= { sapEgrEGBaseStEntry 19 } sapEgrEGBaseStQcFwdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdInPfOcts." ::= { sapEgrEGBaseStEntry 20 } sapEgrEGBaseStQcFwdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrEGBaseStEntry 21 } sapEgrEGBaseStQcFwdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdOutPfPkts." ::= { sapEgrEGBaseStEntry 22 } sapEgrEGBaseStQcFwdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdOutPfPkts." ::= { sapEgrEGBaseStEntry 23 } sapEgrEGBaseStQcFwdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrEGBaseStEntry 24 } sapEgrEGBaseStQcFwdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdOutPfOcts." ::= { sapEgrEGBaseStEntry 25 } sapEgrEGBaseStQcFwdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGBaseStQcFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdOutPfOcts." ::= { sapEgrEGBaseStEntry 26 } sapEgrEGMbrBaseStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEGMbrBaseStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGMbrBaseStTable that contains basic Encap Group statistics per member. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember. In the descriptions below 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip." ::= { tmnxSapObjs 130 } sapEgrEGMbrBaseStEntry OBJECT-TYPE SYNTAX SapEgrEGMbrBaseStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific Encap Group member of a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapEgrEncapGrpMember } ::= { sapEgrEGMbrBaseStTable 1 } SapEgrEGMbrBaseStEntry ::= SEQUENCE { sapEgrEGMbrBaseStLstClearedTime TimeStamp, sapEgrEGMbrBaseStCustId TmnxCustId, sapEgrEGMbrBaseStQcDpdInPfPkts Counter64, sapEgrEGMbrBaseStQcDpdInPfPktsL Counter32, sapEgrEGMbrBaseStQcDpdInPfPktsH Counter32, sapEgrEGMbrBaseStQcDpdInPfOcts Counter64, sapEgrEGMbrBaseStQcDpdInPfOctsL Counter32, sapEgrEGMbrBaseStQcDpdInPfOctsH Counter32, sapEgrEGMbrBaseStQcDpdOutPfPkts Counter64, sapEgrEGMbrBaseStQcDpdOutPfPktsL Counter32, sapEgrEGMbrBaseStQcDpdOutPfPktsH Counter32, sapEgrEGMbrBaseStQcDpdOutPfOcts Counter64, sapEgrEGMbrBaseStQcDpdOutPfOctsL Counter32, sapEgrEGMbrBaseStQcDpdOutPfOctsH Counter32, sapEgrEGMbrBaseStQcFwdInPfPkts Counter64, sapEgrEGMbrBaseStQcFwdInPfPktsL Counter32, sapEgrEGMbrBaseStQcFwdInPfPktsH Counter32, sapEgrEGMbrBaseStQcFwdInPfOcts Counter64, sapEgrEGMbrBaseStQcFwdInPfOctsL Counter32, sapEgrEGMbrBaseStQcFwdInPfOctsH Counter32, sapEgrEGMbrBaseStQcFwdOutPfPkts Counter64, sapEgrEGMbrBaseStQcFwdOutPfPktsL Counter32, sapEgrEGMbrBaseStQcFwdOutPfPktsH Counter32, sapEgrEGMbrBaseStQcFwdOutPfOcts Counter64, sapEgrEGMbrBaseStQcFwdOutPfOctsL Counter32, sapEgrEGMbrBaseStQcFwdOutPfOctsH Counter32 } sapEgrEGMbrBaseStLstClearedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStLstClearedTime indicates the sysUpTime when the counters in this table were last cleared." ::= { sapEgrEGMbrBaseStEntry 1 } sapEgrEGMbrBaseStCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStCustId indicates the Customer ID for the associated service." ::= { sapEgrEGMbrBaseStEntry 2 } sapEgrEGMbrBaseStQcDpdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdInPfPkts indicates the number of in-profile packets dropped by the egress Qchip due to: SAP state, egress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc." ::= { sapEgrEGMbrBaseStEntry 3 } sapEgrEGMbrBaseStQcDpdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts." ::= { sapEgrEGMbrBaseStEntry 4 } sapEgrEGMbrBaseStQcDpdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts." ::= { sapEgrEGMbrBaseStEntry 5 } sapEgrEGMbrBaseStQcDpdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdInPfOcts indicates the number of in-profile octets dropped by the egress Qchip due to: SAP state, egress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc." ::= { sapEgrEGMbrBaseStEntry 6 } sapEgrEGMbrBaseStQcDpdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts." ::= { sapEgrEGMbrBaseStEntry 7 } sapEgrEGMbrBaseStQcDpdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts." ::= { sapEgrEGMbrBaseStEntry 8 } sapEgrEGMbrBaseStQcDpdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGMbrBaseStEntry 9 } sapEgrEGMbrBaseStQcDpdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts." ::= { sapEgrEGMbrBaseStEntry 10 } sapEgrEGMbrBaseStQcDpdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts." ::= { sapEgrEGMbrBaseStEntry 11 } sapEgrEGMbrBaseStQcDpdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGMbrBaseStEntry 12 } sapEgrEGMbrBaseStQcDpdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts." ::= { sapEgrEGMbrBaseStEntry 13 } sapEgrEGMbrBaseStQcDpdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcDpdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts." ::= { sapEgrEGMbrBaseStEntry 14 } sapEgrEGMbrBaseStQcFwdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrEGMbrBaseStEntry 15 } sapEgrEGMbrBaseStQcFwdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts." ::= { sapEgrEGMbrBaseStEntry 16 } sapEgrEGMbrBaseStQcFwdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts." ::= { sapEgrEGMbrBaseStEntry 17 } sapEgrEGMbrBaseStQcFwdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip." ::= { sapEgrEGMbrBaseStEntry 18 } sapEgrEGMbrBaseStQcFwdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts." ::= { sapEgrEGMbrBaseStEntry 19 } sapEgrEGMbrBaseStQcFwdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts." ::= { sapEgrEGMbrBaseStEntry 20 } sapEgrEGMbrBaseStQcFwdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrEGMbrBaseStEntry 21 } sapEgrEGMbrBaseStQcFwdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts." ::= { sapEgrEGMbrBaseStEntry 22 } sapEgrEGMbrBaseStQcFwdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts." ::= { sapEgrEGMbrBaseStEntry 23 } sapEgrEGMbrBaseStQcFwdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip." ::= { sapEgrEGMbrBaseStEntry 24 } sapEgrEGMbrBaseStQcFwdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts." ::= { sapEgrEGMbrBaseStEntry 25 } sapEgrEGMbrBaseStQcFwdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrBaseStQcFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts." ::= { sapEgrEGMbrBaseStEntry 26 } sapEgrEGQueueStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEGQueueStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGQueueStTable contains egress Encap Group queue statistics at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember." ::= { tmnxSapObjs 131 } sapEgrEGQueueStEntry OBJECT-TYPE SYNTAX SapEgrEGQueueStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress QoS queue statistics about a specific Encap group of a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapEgrEGQueueId } ::= { sapEgrEGQueueStTable 1 } SapEgrEGQueueStEntry ::= SEQUENCE { sapEgrEGQueueId TSapEgrQueueId, sapEgrEGCustId TmnxCustId, sapEgrEGQueueStFwdInPfPkts Counter64, sapEgrEGQueueStFwdInPfPktsL Counter32, sapEgrEGQueueStFwdInPfPktsH Counter32, sapEgrEGQueueStDpdInPfPkts Counter64, sapEgrEGQueueStDpdInPfPktsL Counter32, sapEgrEGQueueStDpdInPfPktsH Counter32, sapEgrEGQueueStFwdOutPfPkts Counter64, sapEgrEGQueueStFwdOutPfPktsL Counter32, sapEgrEGQueueStFwdOutPfPktsH Counter32, sapEgrEGQueueStDpdOutPfPkts Counter64, sapEgrEGQueueStDpdOutPfPktsL Counter32, sapEgrEGQueueStDpdOutPfPktsH Counter32, sapEgrEGQueueStFwdInPfOcts Counter64, sapEgrEGQueueStFwdInPfOctsL Counter32, sapEgrEGQueueStFwdInPfOctsH Counter32, sapEgrEGQueueStDpdInPfOcts Counter64, sapEgrEGQueueStDpdInPfOctsL Counter32, sapEgrEGQueueStDpdInPfOctsH Counter32, sapEgrEGQueueStFwdOutPfOcts Counter64, sapEgrEGQueueStFwdOutPfOctsL Counter32, sapEgrEGQueueStFwdOutPfOctsH Counter32, sapEgrEGQueueStDpdOutPfOcts Counter64, sapEgrEGQueueStDpdOutPfOctsL Counter32, sapEgrEGQueueStDpdOutPfOctsH Counter32 } sapEgrEGQueueId OBJECT-TYPE SYNTAX TSapEgrQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrEGQueueId indicates the index of the egress QoS queue of this SAP." ::= { sapEgrEGQueueStEntry 1 } sapEgrEGCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGCustId indicates the Customer ID for the associated service." ::= { sapEgrEGQueueStEntry 2 } sapEgrEGQueueStFwdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress queue." ::= { sapEgrEGQueueStEntry 3 } sapEgrEGQueueStFwdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdInPfPkts." ::= { sapEgrEGQueueStEntry 4 } sapEgrEGQueueStFwdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGQueueStFwdInPfPkts." ::= { sapEgrEGQueueStEntry 5 } sapEgrEGQueueStDpdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdInPfPkts indicates the number of in-profile packets discarded by the egress Queue due to: MBS exceeded, buffer pool limit exceeded etc." ::= { sapEgrEGQueueStEntry 6 } sapEgrEGQueueStDpdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdInPfPkts." ::= { sapEgrEGQueueStEntry 7 } sapEgrEGQueueStDpdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdInPfPkts." ::= { sapEgrEGQueueStEntry 8 } sapEgrEGQueueStFwdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress queue." ::= { sapEgrEGQueueStEntry 9 } sapEgrEGQueueStFwdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdOutPfPkts." ::= { sapEgrEGQueueStEntry 10 } sapEgrEGQueueStFwdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGQueueStFwdOutPfPkts." ::= { sapEgrEGQueueStEntry 11 } sapEgrEGQueueStDpdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded etc." ::= { sapEgrEGQueueStEntry 12 } sapEgrEGQueueStDpdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdOutPfPkts." ::= { sapEgrEGQueueStEntry 13 } sapEgrEGQueueStDpdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdOutPfPkts." ::= { sapEgrEGQueueStEntry 14 } sapEgrEGQueueStFwdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress queue." ::= { sapEgrEGQueueStEntry 15 } sapEgrEGQueueStFwdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdInPfOcts." ::= { sapEgrEGQueueStEntry 16 } sapEgrEGQueueStFwdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStFwdInPfOcts." ::= { sapEgrEGQueueStEntry 17 } sapEgrEGQueueStDpdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdInPfOcts indicates the number of in-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded etc." ::= { sapEgrEGQueueStEntry 18 } sapEgrEGQueueStDpdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdInPfOcts." ::= { sapEgrEGQueueStEntry 19 } sapEgrEGQueueStDpdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdInPfOcts." ::= { sapEgrEGQueueStEntry 20 } sapEgrEGQueueStFwdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress queue." ::= { sapEgrEGQueueStEntry 21 } sapEgrEGQueueStFwdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdOutPfOcts." ::= { sapEgrEGQueueStEntry 22 } sapEgrEGQueueStFwdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStFwdOutPfOcts." ::= { sapEgrEGQueueStEntry 23 } sapEgrEGQueueStDpdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGQueueStEntry 24 } sapEgrEGQueueStDpdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdOutPfOcts." ::= { sapEgrEGQueueStEntry 25 } sapEgrEGQueueStDpdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGQueueStDpdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdOutPfOcts." ::= { sapEgrEGQueueStEntry 26 } sapEgrEGMbrQueueStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEGMbrQueueStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGMbrQueueStTable contains egress Encap Group member queue statistics per member. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember." ::= { tmnxSapObjs 132 } sapEgrEGMbrQueueStEntry OBJECT-TYPE SYNTAX SapEgrEGMbrQueueStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress QoS queue statistics about a specific Encap group member of a SAP." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapEgrEncapGrpMember, sapEgrEGMbrQueueId } ::= { sapEgrEGMbrQueueStTable 1 } SapEgrEGMbrQueueStEntry ::= SEQUENCE { sapEgrEGMbrQueueId TSapEgrQueueId, sapEgrEGMbrQueueCustId TmnxCustId, sapEgrEGMbrQueueStFwdInPfPkts Counter64, sapEgrEGMbrQueueStFwdInPfPktsL Counter32, sapEgrEGMbrQueueStFwdInPfPktsH Counter32, sapEgrEGMbrQueueStDpdInPfPkts Counter64, sapEgrEGMbrQueueStDpdInPfPktsL Counter32, sapEgrEGMbrQueueStDpdInPfPktsH Counter32, sapEgrEGMbrQueueStFwdOutPfPkts Counter64, sapEgrEGMbrQueueStFwdOutPfPktsL Counter32, sapEgrEGMbrQueueStFwdOutPfPktsH Counter32, sapEgrEGMbrQueueStDpdOutPfPkts Counter64, sapEgrEGMbrQueueStDpdOutPfPktsL Counter32, sapEgrEGMbrQueueStDpdOutPfPktsH Counter32, sapEgrEGMbrQueueStFwdInPfOcts Counter64, sapEgrEGMbrQueueStFwdInPfOctsL Counter32, sapEgrEGMbrQueueStFwdInPfOctsH Counter32, sapEgrEGMbrQueueStDpdInPfOcts Counter64, sapEgrEGMbrQueueStDpdInPfOctsL Counter32, sapEgrEGMbrQueueStDpdInPfOctsH Counter32, sapEgrEGMbrQueueStFwdOutPfOcts Counter64, sapEgrEGMbrQueueStFwdOutPfOctsL Counter32, sapEgrEGMbrQueueStFwdOutPfOctsH Counter32, sapEgrEGMbrQueueStDpdOutPfOcts Counter64, sapEgrEGMbrQueueStDpdOutPfOctsL Counter32, sapEgrEGMbrQueueStDpdOutPfOctsH Counter32 } sapEgrEGMbrQueueId OBJECT-TYPE SYNTAX TSapEgrQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueId indicates the index of the egress QoS queue of this SAP." ::= { sapEgrEGMbrQueueStEntry 1 } sapEgrEGMbrQueueCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueCustId indicates the Customer ID for the associated service." ::= { sapEgrEGMbrQueueStEntry 2 } sapEgrEGMbrQueueStFwdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress queue." ::= { sapEgrEGMbrQueueStEntry 3 } sapEgrEGMbrQueueStFwdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdInPfPkts." ::= { sapEgrEGMbrQueueStEntry 4 } sapEgrEGMbrQueueStFwdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdInPfPkts." ::= { sapEgrEGMbrQueueStEntry 5 } sapEgrEGMbrQueueStDpdInPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdInPfPkts indicates the number of in-profile packets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGMbrQueueStEntry 6 } sapEgrEGMbrQueueStDpdInPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdInPfPkts." ::= { sapEgrEGMbrQueueStEntry 7 } sapEgrEGMbrQueueStDpdInPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdInPfPkts." ::= { sapEgrEGMbrQueueStEntry 8 } sapEgrEGMbrQueueStFwdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress queue." ::= { sapEgrEGMbrQueueStEntry 9 } sapEgrEGMbrQueueStFwdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts." ::= { sapEgrEGMbrQueueStEntry 10 } sapEgrEGMbrQueueStFwdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts." ::= { sapEgrEGMbrQueueStEntry 11 } sapEgrEGMbrQueueStDpdOutPfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGMbrQueueStEntry 12 } sapEgrEGMbrQueueStDpdOutPfPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts." ::= { sapEgrEGMbrQueueStEntry 13 } sapEgrEGMbrQueueStDpdOutPfPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts." ::= { sapEgrEGMbrQueueStEntry 14 } sapEgrEGMbrQueueStFwdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress queue." ::= { sapEgrEGMbrQueueStEntry 15 } sapEgrEGMbrQueueStFwdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdInPfOcts." ::= { sapEgrEGMbrQueueStEntry 16 } sapEgrEGMbrQueueStFwdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdInPfOcts." ::= { sapEgrEGMbrQueueStEntry 17 } sapEgrEGMbrQueueStDpdInPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdInPfOcts indicates the number of in-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGMbrQueueStEntry 18 } sapEgrEGMbrQueueStDpdInPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdInPfOcts." ::= { sapEgrEGMbrQueueStEntry 19 } sapEgrEGMbrQueueStDpdInPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdInPfOcts." ::= { sapEgrEGMbrQueueStEntry 20 } sapEgrEGMbrQueueStFwdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress queue." ::= { sapEgrEGMbrQueueStEntry 21 } sapEgrEGMbrQueueStFwdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts." ::= { sapEgrEGMbrQueueStEntry 22 } sapEgrEGMbrQueueStFwdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts." ::= { sapEgrEGMbrQueueStEntry 23 } sapEgrEGMbrQueueStDpdOutPfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { sapEgrEGMbrQueueStEntry 24 } sapEgrEGMbrQueueStDpdOutPfOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts." ::= { sapEgrEGMbrQueueStEntry 25 } sapEgrEGMbrQueueStDpdOutPfOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrQueueStDpdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts." ::= { sapEgrEGMbrQueueStEntry 26 } sapEgrEGSchedStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEGSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGSchedStTable contains egress encapsulation group QoS scheduler SAP at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember." ::= { tmnxSapObjs 133 } sapEgrEGSchedStEntry OBJECT-TYPE SYNTAX SapEgrEGSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific QoS scheduler instantiated per encapsulation group of SAP." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapEgrEGSchedStName } ::= { sapEgrEGSchedStTable 1 } SapEgrEGSchedStEntry ::= SEQUENCE { sapEgrEGSchedStName TNamedItem, sapEgrEGSchedCustId TmnxCustId, sapEgrEGSchedStFwdPkts Counter64, sapEgrEGSchedStFwdPktsL Counter32, sapEgrEGSchedStFwdPktsH Counter32, sapEgrEGSchedStFwdOcts Counter64, sapEgrEGSchedStFwdOctsL Counter32, sapEgrEGSchedStFwdOctsH Counter32 } sapEgrEGSchedStName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGSchedStName specifies the name of the egress QoS scheduler of this SAP." ::= { sapEgrEGSchedStEntry 1 } sapEgrEGSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGSchedCustId indicates the Customer ID for the associated service." ::= { sapEgrEGSchedStEntry 2 } sapEgrEGSchedStFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGSchedStFwdPkts indicates thee number of packets forwarded by the egress QoS scheduler of this SAP." ::= { sapEgrEGSchedStEntry 3 } sapEgrEGSchedStFwdPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGSchedStFwdPktsL indicates the lower 32 bits of the value of sapEgrEGSchedStFwdPkts." ::= { sapEgrEGSchedStEntry 4 } sapEgrEGSchedStFwdPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGSchedStFwdPktsH indicates the higher 32 bits of the value of sapEgrEGSchedStFwdPkts." ::= { sapEgrEGSchedStEntry 5 } sapEgrEGSchedStFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGSchedStFwdOcts indicates the number of octets forwarded by the egress QoS scheduler of this SAP." ::= { sapEgrEGSchedStEntry 6 } sapEgrEGSchedStFwdOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGSchedStFwdOctsL indicates the lower 32 bits of the value of sapEgrEGSchedStFwdOcts." ::= { sapEgrEGSchedStEntry 7 } sapEgrEGSchedStFwdOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGSchedStFwdOctsH indicates the higher 32 bits of the value of sapEgrEGSchedStFwdOcts." ::= { sapEgrEGSchedStEntry 8 } sapEgrEGMbrSchedStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrEGMbrSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGMbrSchedStTable contains egress encapsulation group QoS scheduler SAP per member. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember." ::= { tmnxSapObjs 134 } sapEgrEGMbrSchedStEntry OBJECT-TYPE SYNTAX SapEgrEGMbrSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific QoS scheduler instantiated per encapsulation group member of SAP." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapEgrEncapGrpMember, sapEgrEGMbrSchedStName } ::= { sapEgrEGMbrSchedStTable 1 } SapEgrEGMbrSchedStEntry ::= SEQUENCE { sapEgrEGMbrSchedStName TNamedItem, sapEgrEGMbrSchedCustId TmnxCustId, sapEgrEGMbrSchedStFwdPkts Counter64, sapEgrEGMbrSchedStFwdPktsL Counter32, sapEgrEGMbrSchedStFwdPktsH Counter32, sapEgrEGMbrSchedStFwdOcts Counter64, sapEgrEGMbrSchedStFwdOctsL Counter32, sapEgrEGMbrSchedStFwdOctsH Counter32 } sapEgrEGMbrSchedStName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrEGMbrSchedStName specifies the name of the egress QoS scheduler of this SAP." ::= { sapEgrEGMbrSchedStEntry 1 } sapEgrEGMbrSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrSchedCustId indicates the Customer ID for the associated service." ::= { sapEgrEGMbrSchedStEntry 2 } sapEgrEGMbrSchedStFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrSchedStFwdPkts indicates the number of packets forwarded by the egress QoS scheduler of this SAP." ::= { sapEgrEGMbrSchedStEntry 3 } sapEgrEGMbrSchedStFwdPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrSchedStFwdPktsL indicates the lower 32 bits of the value of sapEgrEGMbrSchedStFwdPkts." ::= { sapEgrEGMbrSchedStEntry 4 } sapEgrEGMbrSchedStFwdPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrSchedStFwdPktsH indicates the higher 32 bits of the value of sapEgrEGMbrSchedStFwdPkts." ::= { sapEgrEGMbrSchedStEntry 5 } sapEgrEGMbrSchedStFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrSchedStFwdOcts indicates the number of octets forwarded by the egress QoS scheduler of this SAP." ::= { sapEgrEGMbrSchedStEntry 6 } sapEgrEGMbrSchedStFwdOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrSchedStFwdOctsL indicates the lower 32 bits of the value of sapEgrEGMbrSchedStFwdOcts." ::= { sapEgrEGMbrSchedStEntry 7 } sapEgrEGMbrSchedStFwdOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrEGMbrSchedStFwdOctsH indicates the higher 32 bits of the value of sapEgrEGMbrSchedStFwdOcts." ::= { sapEgrEGMbrSchedStEntry 8 } sapPortIdEgrEGSchedStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapPortIdEgrEGSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdEgrEGSchedStTable contains egress QoS scheduler SAP statistics per port at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember. This table is used when the encap group's SAP is a CCAG or LAG in 'link' mode or an APS." ::= { tmnxSapObjs 135 } sapPortIdEgrEGSchedStEntry OBJECT-TYPE SYNTAX SapPortIdEgrEGSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific Encap Group's QoS scheduler port of a SAP. Entries are created when a scheduler policy is applied to an Encap Group." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapPortIdEgrEGSchedStName, sapPortIdEgrPortId } ::= { sapPortIdEgrEGSchedStTable 1 } SapPortIdEgrEGSchedStEntry ::= SEQUENCE { sapPortIdEgrEGSchedStName TNamedItem, sapPortIdEgrEGSchedCustId TmnxCustId, sapPortIdEgrEGSchedFwdPkts Counter64, sapPortIdEgrEGSchedFwdPktsL Counter32, sapPortIdEgrEGSchedFwdPktsH Counter32, sapPortIdEgrEGSchedFwdOcts Counter64, sapPortIdEgrEGSchedFwdOctsL Counter32, sapPortIdEgrEGSchedFwdOctsH Counter32 } sapPortIdEgrEGSchedStName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdEgrEGSchedStName specifies the name of the egress encapsulation group port scheduler of this SAP." ::= { sapPortIdEgrEGSchedStEntry 1 } sapPortIdEgrEGSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGSchedCustId indicates the Customer ID for the associated service." ::= { sapPortIdEgrEGSchedStEntry 2 } sapPortIdEgrEGSchedFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGSchedFwdPkts indicates the number of packets forwarded by the egress port scheduler of this SAP." ::= { sapPortIdEgrEGSchedStEntry 3 } sapPortIdEgrEGSchedFwdPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGSchedFwdPktsL indicates the lower 32 bits of the value of sapPortIdEgrEGSchedFwdPkts." ::= { sapPortIdEgrEGSchedStEntry 4 } sapPortIdEgrEGSchedFwdPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapPortIdEgrEGSchedFwdPktsH indicates the higher 32 bits of the value of sapPortIdEgrEGSchedFwdPkts." ::= { sapPortIdEgrEGSchedStEntry 5 } sapPortIdEgrEGSchedFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapPortIdEgrEGSchedFwdOcts indicates the number of octets forwarded by the egress port scheduler of this SAP." ::= { sapPortIdEgrEGSchedStEntry 6 } sapPortIdEgrEGSchedFwdOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGSchedFwdOctsL indicates the lower 32 bits of the value of sapPortIdEgrEGSchedFwdOcts." ::= { sapPortIdEgrEGSchedStEntry 7 } sapPortIdEgrEGSchedFwdOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapPortIdEgrEGSchedFwdOctsH indicates the higher 32 bits of the value of sapPortIdEgrEGSchedFwdOcts." ::= { sapPortIdEgrEGSchedStEntry 8 } sapPortIdEgrEGMbrSchedStTable OBJECT-TYPE SYNTAX SEQUENCE OF SapPortIdEgrEGMbrSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdEgrEGMbrSchedStTable contains egress QoS scheduler SAP statistics per port. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember. This table fetches statistics per member. This table is used when the Encap Group's SAP is a CCAG or LAG in 'link' mode or an APS." ::= { tmnxSapObjs 136 } sapPortIdEgrEGMbrSchedStEntry OBJECT-TYPE SYNTAX SapPortIdEgrEGMbrSchedStEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific Encap Group member QoS scheduler port of a SAP. Entries are created when a scheduler policy is applied to an Encap Group." INDEX { svcId, sapPortId, sapEncapValue, sapEgrEncapGroupName, sapEgrEncapGrpMember, sapPortIdEgrEGMbrSchedStName, sapPortIdEgrPortId } ::= { sapPortIdEgrEGMbrSchedStTable 1 } SapPortIdEgrEGMbrSchedStEntry ::= SEQUENCE { sapPortIdEgrEGMbrSchedStName TNamedItem, sapPortIdEgrEGMbrSchedCustId TmnxCustId, sapPortIdEgrEGMbrSchedFwdPkts Counter64, sapPortIdEgrEGMbrSchedFwdPktsL Counter32, sapPortIdEgrEGMbrSchedFwdPktsH Counter32, sapPortIdEgrEGMbrSchedFwdOcts Counter64, sapPortIdEgrEGMbrSchedFwdOctsL Counter32, sapPortIdEgrEGMbrSchedFwdOctsH Counter32 } sapPortIdEgrEGMbrSchedStName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapPortIdEgrEGMbrSchedStName specifies the name of the egress encapsulation group QOS port scheduler of this SAP." ::= { sapPortIdEgrEGMbrSchedStEntry 1 } sapPortIdEgrEGMbrSchedCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGMbrSchedCustId indicates the Customer ID for the associated service." ::= { sapPortIdEgrEGMbrSchedStEntry 2 } sapPortIdEgrEGMbrSchedFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGMbrSchedFwdPkts indicates the number of packets forwarded by the egress port scheduler of this SAP." ::= { sapPortIdEgrEGMbrSchedStEntry 3 } sapPortIdEgrEGMbrSchedFwdPktsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGMbrSchedFwdPktsL indicates the lower 32 bits of the value of sapPortIdEgrEGMbrSchedFwdPkts." ::= { sapPortIdEgrEGMbrSchedStEntry 4 } sapPortIdEgrEGMbrSchedFwdPktsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapPortIdEgrEGMbrSchedFwdPktsH indicates the higher 32 bits of the value of sapPortIdEgrEGMbrSchedFwdPkts." ::= { sapPortIdEgrEGMbrSchedStEntry 5 } sapPortIdEgrEGMbrSchedFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapPortIdEgrEGMbrSchedFwdOcts indicates the number of octets forwarded by the egress port scheduler of this SAP." ::= { sapPortIdEgrEGMbrSchedStEntry 6 } sapPortIdEgrEGMbrSchedFwdOctsL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapPortIdEgrEGMbrSchedFwdOctsL indicates the lower 32 bits of the value of sapPortIdEgrEGMbrSchedFwdOcts." ::= { sapPortIdEgrEGMbrSchedStEntry 7 } sapPortIdEgrEGMbrSchedFwdOctsH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value sapPortIdEgrEGMbrSchedFwdOctsH indicates the higher 32 bits of the value of sapPortIdEgrEGMbrSchedFwdOcts." ::= { sapPortIdEgrEGMbrSchedStEntry 8 } sapDefHostTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapDefHostTableLastChanged indicates the value of sysUpTime at the time of the last modification of an conceptual row in the sapDefHostTable." ::= { tmnxSapObjs 137 } sapDefHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SapDefHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP default host information. Entries in this table can be created or deleted via SNMP operations. A row in this table can only be created for a SAP in a group interface, that is each row in the sapBaseInfoTable where the value of sapIesIfIndex corresponds to a row in the vRtrIfTable where the value of vRtrIfType is equal to 'serviceIesGroup' or 'serviceVprnGroup'." ::= { tmnxSapObjs 138 } sapDefHostEntry OBJECT-TYPE SYNTAX SapDefHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SAP default host specific information." INDEX { svcId, sapPortId, sapEncapValue, sapDefHostIpv4SubnetAddr, sapDefHostIpv4SubnetMask } ::= { sapDefHostTable 1 } SapDefHostEntry ::= SEQUENCE { sapDefHostIpv4SubnetAddr IpAddress, sapDefHostIpv4SubnetMask IpAddress, sapDefHostLastChanged TimeStamp, sapDefHostRowStatus RowStatus, sapDefHostNextHopIpv4Addr IpAddress } sapDefHostIpv4SubnetAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapDefHostIpv4SubnetAddr specifies the IPv4 subnet address for this SAP default host. It must be equal to one of the addresses of the subscriber interface this SAP belongs to, that is one of its vRiaIpAddress values." DEFVAL { '00000000'H } ::= { sapDefHostEntry 1 } sapDefHostIpv4SubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDefHostIpv4SubnetMask specifies the subnet mask applicable to sapDefHostIpv4SubnetAddr. It must be equal to the netmask of the subscriber interface address associated with sapDefHostIpv4SubnetAddr, that is the vRiaNetMask of the same row in the vRtrIpAddrTable." DEFVAL { '00000000'H } ::= { sapDefHostEntry 2 } sapDefHostLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDefHostLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row." ::= { sapDefHostEntry 3 } sapDefHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapDefHostRowStatus specifies the row status of this row." ::= { sapDefHostEntry 4 } sapDefHostNextHopIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapDefHostNextHopIpv4Addr specifies the next-hop IP address for this SAP default host. The value all zeroes is not allowed. A value for sapDefHostNextHopIpv4Addr must be specified when a row is created and this value cannot be changed afterwards." ::= { sapDefHostEntry 5 } sapTlsSpbTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsSpbTblLastChanged indicates the sysUpTime at the time of the last modification of sapTlsSpbTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 139 } sapTlsSpbTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsSpbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TLS SAP specific Shortest Path Bridging (SPB) information." ::= { tmnxSapObjs 140 } sapTlsSpbEntry OBJECT-TYPE SYNTAX SapTlsSpbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry that contains TLS SAP specific SPB information." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapTlsSpbTable 1 } SapTlsSpbEntry ::= SEQUENCE { sapTlsSpbRowStatus RowStatus, sapTlsSpbLastChgd TimeStamp, sapTlsSpbIfIndex InterfaceIndexOrZero, sapTlsSpbAdminState TmnxAdminState } sapTlsSpbRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This value of the object sapTlsSpbRowStatus specifies the status of this row." ::= { sapTlsSpbEntry 1 } sapTlsSpbLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsSpbLastChgd indicates the timestamp of last change to this row in sapTlsSpbTable." ::= { sapTlsSpbEntry 2 } sapTlsSpbIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsSpbIfIndex indicates the interface index assigned to this SAP for Shortest Path Bridging." ::= { sapTlsSpbEntry 3 } sapTlsSpbAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The sapTlsSpbAdminState specifies the desired administrative state for Shortest Path Bridging on this sap." DEFVAL { outOfService } ::= { sapTlsSpbEntry 4 } tmnxIpTunnelTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxIpTunnelTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 141 } tmnxIpTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxIpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxIpTunnelTable contains IP Tunnel entries for each SAP. Entries are created/deleted by the user." ::= { tmnxSapObjs 142 } tmnxIpTunnelEntry OBJECT-TYPE SYNTAX TmnxIpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxIpTunnelEntry contains information about a single IP Tunnel entry." INDEX { svcId, sapPortId, sapEncapValue, tmnxIpTunnelName } ::= { tmnxIpTunnelTable 1 } TmnxIpTunnelEntry ::= SEQUENCE { tmnxIpTunnelName TNamedItem, tmnxIpTunnelRowStatus RowStatus, tmnxIpTunnelLastChanged TimeStamp, tmnxIpTunnelGreHeader TruthValue, tmnxIpTunnelDescription TItemDescription, tmnxIpTunnelLclIpAddrType InetAddressType, tmnxIpTunnelLclIpAddr InetAddress, tmnxIpTunnelRemIpAddrType InetAddressType, tmnxIpTunnelRemIpAddr InetAddress, tmnxIpTunnelBackupRemIpAddrType InetAddressType, tmnxIpTunnelBackupRemIpAddr InetAddress, tmnxIpTunnelOperRemIpAddrType InetAddressType, tmnxIpTunnelOperRemIpAddr InetAddress, tmnxIpTunnelDeliverySvcId TmnxServId, tmnxIpTunnelAdminState TmnxAdminState, tmnxIpTunnelOperState TmnxIpTunnelOperState, tmnxIpTunnelOperFlags BITS, tmnxIpTunnelDscp TDSCPNameOrEmpty, tmnxIpTunnelReassembly Integer32, tmnxIpTunnelClearDfBit TruthValue, tmnxIpTunnelIpMtu Unsigned32, tmnxIpTunnelHostISA TmnxHwIndexOrZero, tmnxIpTunnelEncapIpMtu Unsigned32, tmnxIpTunnelPropagateIpv6PMTU TruthValue, tmnxIpTunnelIcmp6Pkt2Big TruthValue, tmnxIpTunnelIcmp6NumPkt2Big Unsigned32, tmnxIpTunnelIcmp6Pkt2BigTime Unsigned32, tmnxIpTunnelGreHeaderSendKey Unsigned32, tmnxIpTunnelGreHeaderRcvKey Unsigned32, tmnxIpTunnelGreHeaderKeysSet TruthValue, tmnxIpTunnelOperChanged TimeStamp, tmnxIpTunnelPubTcpMssAdjust Integer32, tmnxIpTunnelPrivTcpMssAdjust Integer32, tmnxIpTunnelDeliverySvcName TLNamedItemOrEmpty, tmnxIpTunnelHostEsa TmnxEsaIdOrZero, tmnxIpTunnelHostEsaVm TmnxEsaVmIdOrZero, tmnxIpTunnelIPsecTransportMdProf TNamedItemOrEmpty, tmnxIpTunnelPropagateIpv4PMTU TruthValue, tmnxIpTunnelIcmpFragReq TruthValue, tmnxIpTunnelIcmpFragReqNum Unsigned32, tmnxIpTunnelIcmpFragReqTime Unsigned32, tmnxIpTunnelPMTUDiscoverAging Unsigned32 } tmnxIpTunnelName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxIpTunnelName specifies the name of the tunnel and is part of the index for the table tmnxIpTunnelTable." ::= { tmnxIpTunnelEntry 1 } tmnxIpTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The tmnxIpTunnelRowStatus object is used to create and delete rows in the tmnxIpTunnelTable." ::= { tmnxIpTunnelEntry 2 } tmnxIpTunnelLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelLastChanged indicates the sysUpTime at the time of the last modification of this entry." ::= { tmnxIpTunnelEntry 3 } tmnxIpTunnelGreHeader OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelGreHeader specifies whether the tunnel will include a GRE header in it." DEFVAL { false } ::= { tmnxIpTunnelEntry 4 } tmnxIpTunnelDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelDescription specifies the user-provided description for each tmnxIpTunnelEntry in the table tmnxIpTunnelTable." DEFVAL { "" } ::= { tmnxIpTunnelEntry 5 } tmnxIpTunnelLclIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelLclIpAddrType specifies the address type of address in tmnxIpTunnelLclIpAddr." DEFVAL { unknown } ::= { tmnxIpTunnelEntry 6 } tmnxIpTunnelLclIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelLclIpAddr specifies the address of the local endpoint of this IP tunnel." DEFVAL { ''H } ::= { tmnxIpTunnelEntry 7 } tmnxIpTunnelRemIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelRemIpAddrType specifies the address type of address in tmnxIpTunnelRemIpAddr." DEFVAL { unknown } ::= { tmnxIpTunnelEntry 8 } tmnxIpTunnelRemIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelRemIpAddr specifies the address of the remote endpoint of this IP tunnel." DEFVAL { ''H } ::= { tmnxIpTunnelEntry 9 } tmnxIpTunnelBackupRemIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelBackupRemIpAddrType specifies the address type of address in tmnxIpTunnelBackupRemIpAddr." DEFVAL { unknown } ::= { tmnxIpTunnelEntry 10 } tmnxIpTunnelBackupRemIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelBackupRemIpAddr specifies the address of the backup remote endpoint of this IP tunnel." DEFVAL { ''H } ::= { tmnxIpTunnelEntry 11 } tmnxIpTunnelOperRemIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelOperRemIpAddrType indicates the address type of address in tmnxIpTunnelOperRemIpAddr." ::= { tmnxIpTunnelEntry 12 } tmnxIpTunnelOperRemIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelOperRemIpAddr indicates the address of the operational remote endpoint of this IP tunnel." ::= { tmnxIpTunnelEntry 13 } tmnxIpTunnelDeliverySvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelDeliverySvcId specifies the ID of the tunnel delivery service. The value of tmnxIpTunnelDeliverySvcId must be zero when tmnxIpTunnelDeliverySvcName is not default and vice-versa." DEFVAL { 0 } ::= { tmnxIpTunnelEntry 14 } tmnxIpTunnelAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelAdminState specifies the administrative state of the tmnxIpTunnelEntry." DEFVAL { outOfService } ::= { tmnxIpTunnelEntry 15 } tmnxIpTunnelOperState OBJECT-TYPE SYNTAX TmnxIpTunnelOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelOperState indicates the operational status of tmnxIpTunnelEntry." ::= { tmnxIpTunnelEntry 16 } tmnxIpTunnelOperFlags OBJECT-TYPE SYNTAX BITS { unresolvedLocalIp (0), tunnelAdminDown (1), sapDown (2), unresolvedDeliverySvc (3), unregisteredLocalIp (4), remIpUnreachable (5), unresolvedDstIp (6), trustAnchorsDown (7), certProfileDown (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelOperFlags indicates the reason why the tunnel is operationally down." ::= { tmnxIpTunnelEntry 17 } tmnxIpTunnelDscp OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelDscp specifies DSCP value which will be used in the IP tunnel carrying IP header in the delivery service." DEFVAL { "" } ::= { tmnxIpTunnelEntry 18 } tmnxIpTunnelReassembly OBJECT-TYPE SYNTAX Integer32 (-1 | 0..5000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelReassembly specifies the maximum number of seconds to wait to receive all fragments of a particular IPSec or IP packet for reassembly. The tmnxIpTunnelReassembly value set to zero indicates that reassembly is disabled. The default tmnxIpTunnelReassembly value indicates that this value will be derived from the value of TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object. An 'inconsistentValue' error is returned if the value is not a multiple of 100 milliseconds." DEFVAL { -1 } ::= { tmnxIpTunnelEntry 19 } tmnxIpTunnelClearDfBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelClearDfBit specifies whether to clear Do not Fragment (DF) bit in the outgoing packets in this IP tunnel." DEFVAL { false } ::= { tmnxIpTunnelEntry 20 } tmnxIpTunnelIpMtu OBJECT-TYPE SYNTAX Unsigned32 (0 | 512..9000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIpMtu specifies the MTU size for IP packets for this IP tunnel. A value set to zero indicates maximum supported MTU size on the SAP for this IP tunnel." DEFVAL { 0 } ::= { tmnxIpTunnelEntry 21 } tmnxIpTunnelHostISA OBJECT-TYPE SYNTAX TmnxHwIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelHostISA indicates the active ISA MDA that is being used to host this tunnel. This object will contain a nonzero value only when the tunnel is both operationally up and being hosted by an MDA. When the tunnel is being hosted by an ESA virtual machine, the host will be indicated by the tmnxIpTunnelHostEsa and tmnxIpTunnelHostEsaVm objects." ::= { tmnxIpTunnelEntry 22 } tmnxIpTunnelEncapIpMtu OBJECT-TYPE SYNTAX Unsigned32 (0 | 512..9000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelEncapIpMtu specifies the MTU size for IP packets after tunnel encapsulation has been added. A value set to zero indicates maximum supported MTU size on the SAP for this tunnel." DEFVAL { 0 } ::= { tmnxIpTunnelEntry 23 } tmnxIpTunnelPropagateIpv6PMTU OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelPropagateIpv6PMTU specifies whether to propagate path MTU to IPv6 hosts." DEFVAL { true } ::= { tmnxIpTunnelEntry 24 } tmnxIpTunnelIcmp6Pkt2Big OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIcmp6Pkt2Big specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this ipsec tunnel. When tmnxIpTunnelIcmp6Pkt2Big is set to 'false', ICMPv6 packet-too-big messages are not sent." DEFVAL { true } ::= { tmnxIpTunnelEntry 25 } tmnxIpTunnelIcmp6NumPkt2Big OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIcmp6NumPkt2Big specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by tmnxIpTunnelIcmp6Pkt2BigTime." DEFVAL { 100 } ::= { tmnxIpTunnelEntry 26 } tmnxIpTunnelIcmp6Pkt2BigTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIcmp6Pkt2BigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { tmnxIpTunnelEntry 27 } tmnxIpTunnelGreHeaderSendKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelGreHeaderSendKey specifies the send-key value used while transmitting Gre Header. This value is considered only when tmnxIpTunnelGreHeaderKeysSet is enabled." DEFVAL { 0 } ::= { tmnxIpTunnelEntry 28 } tmnxIpTunnelGreHeaderRcvKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelGreHeaderRcvKey specifies the receive value in Gre Header used to validate the received packets. This value is considered only when tmnxIpTunnelGreHeaderKeysSet is enabled." DEFVAL { 0 } ::= { tmnxIpTunnelEntry 29 } tmnxIpTunnelGreHeaderKeysSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelGreHeaderKeysSet specifies whether to transmit the GRE header using the configured send-key, and whether to validate that the GRE headers of received packets contain the configured receive-key." DEFVAL { false } ::= { tmnxIpTunnelEntry 30 } tmnxIpTunnelOperChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelOperChanged indicates the sysUpTime at the time of the last operational status change of this entry." ::= { tmnxIpTunnelEntry 31 } tmnxIpTunnelPubTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelPubTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in an IP tunnel which is sent from the public network to the private network. The system may use this value to adjust or insert the MSS option in a TCP SYN packet. The TCP MSS adjustment functionality on the public side network is disabled when the following conditions are met. 1) The value of tmnxIpTunnelPubTcpMssAdjust is '-1' or 2) The values of tmnxIpTunnelPubTcpMssAdjust and tmnxIpTunnelEncapIpMtu are both '0'. When the system receives a TCP SYN packet from the public network and this packet contains an MSS option, the system replaces the MSS option value with a new MSS when the new MSS is smaller than the MSS option value. When the system receives a TCP SYN packet from the public network and this packet does not contain an MSS option, the system inserts one with a new MSS. The new MSS is calculated based on the following rules. 1) When the value of tmnxIpTunnelPubTcpMssAdjust is '0' and tmnxIpTunnelEncapIpMtu has a non-zero value, New MSS = tmnxIpTunnelEncapIpMtu - total header size (e.g., IP tunnel overhead, TCP and IP headers) 2) When the value of tmnxIpTunnelPubTcpMssAdjust is in the range of (512..9000) New MSS = tmnxIpTunnelPubTcpMssAdjust" REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -1 } ::= { tmnxIpTunnelEntry 32 } tmnxIpTunnelPrivTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-1 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelPrivTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in an IP tunnel which is sent from the private network to the public network. The system may use this value to adjust or insert the MSS option in a TCP SYN packet. The value of '-1' specifies that the TCP MSS adjustment functionality on the private side is disabled. When the system receives a TCP SYN packet from the private network and this packet contains an MSS option, the system replaces the MSS option value with tmnxIpTunnelPrivTcpMssAdjust when the value of tmnxIpTunnelPrivTcpMssAdjust is smaller than the MSS option value. When the system receives a TCP SYN packet from the private network and this packet does not contain an MSS option, the system inserts one whose MSS is equal to tmnxIpTunnelPrivTcpMssAdjust." REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -1 } ::= { tmnxIpTunnelEntry 33 } tmnxIpTunnelDeliverySvcName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelDeliverySvcName specifies the name of the tunnel delivery service. The value of tmnxIpTunnelDeliverySvcName must be an empty string when tmnxIpTunnelDeliverySvcId is not default and vice-versa." DEFVAL { ''H } ::= { tmnxIpTunnelEntry 34 } tmnxIpTunnelHostEsa OBJECT-TYPE SYNTAX TmnxEsaIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelHostEsa indicates the active ESA that is being used to host this tunnel. This object will contain a nonzero value only when the tunnel is both operationally up and being hosted by an ESA virtual machine. When the tunnel is being hosted by an ISA MDA, the host will be indicated by the tmnxIpTunnelHostISA object." ::= { tmnxIpTunnelEntry 35 } tmnxIpTunnelHostEsaVm OBJECT-TYPE SYNTAX TmnxEsaVmIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelHostEsaVm indicates the active ESA virtual machine that is being used to host this tunnel. This object will contain a nonzero value only when the tunnel is both operationally up and being hosted by an ESA virtual machine. When the tunnel is being hosted by an ISA MDA, the host will be indicated by the tmnxIpTunnelHostISA object." ::= { tmnxIpTunnelEntry 36 } tmnxIpTunnelIPsecTransportMdProf OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIPsecTransportMdProf indicates IPsec transport mode profile associated with this IP tunnel." DEFVAL { ''H } ::= { tmnxIpTunnelEntry 37 } tmnxIpTunnelPropagateIpv4PMTU OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelPropagateIpv4PMTU specifies whether or not to propagate a path MTU to IPv4 hosts." DEFVAL { true } ::= { tmnxIpTunnelEntry 38 } tmnxIpTunnelIcmpFragReq OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIcmpFragReq specifies whether or not 'Fragmentation required and DF flag set' ICMP messages should be sent. When it is set to 'true (1)', the ICMP messages are transmitted by this Ip tunnel. When tmnxIpTunnelIcmpFragReq is set to 'false (2)', the ICMP messages are not sent. When the value of tmnxIpTunnelIcmpFragReq is 'false (2)', it must be set in the same SNMP PDU as tmnxIpTunnelIcmpFragReqNum and tmnxIpTunnelIcmpFragReqTime. The value of tmnxIpTunnelIcmpFragReqNum and tmnxIpTunnelIcmpFragReqTime must be their default values." DEFVAL { true } ::= { tmnxIpTunnelEntry 39 } tmnxIpTunnelIcmpFragReqNum OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIcmpFragReqNum specifies how many 'Fragmentation required and DF flag set' ICMP messages are transmitted in the time frame specified by tmnxIpTunnelIcmpFragReqTime. This value must be set in the same SNMP SET PDU as tmnxIpTunnelIcmpFragReq." DEFVAL { 100 } ::= { tmnxIpTunnelEntry 40 } tmnxIpTunnelIcmpFragReqTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelIcmpFragReqTime specifies the time frame in seconds that is used to limit the number of 'Fragmentation required and DF flag set' ICMP messages transmitted per time frame. This value must be set in the same SNMP SET PDU as tmnxIpTunnelIcmpFragReq." DEFVAL { 10 } ::= { tmnxIpTunnelEntry 41 } tmnxIpTunnelPMTUDiscoverAging OBJECT-TYPE SYNTAX Unsigned32 (900..3600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxIpTunnelPMTUDiscoverAging specifies the number of seconds used to age out the learned MTU, which is obtained through path MTU discovery." DEFVAL { 900 } ::= { tmnxIpTunnelEntry 42 } tmnxIpTnlDstAddrTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlDstAddrTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxIpTnlDstAddrTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 143 } tmnxIpTnlDstAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxIpTnlDstAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxIpTnlDstAddrTable contains destination addresses for each IP tunnel in the system. Entries are created and deleted by the user." ::= { tmnxSapObjs 144 } tmnxIpTnlDstAddrEntry OBJECT-TYPE SYNTAX TmnxIpTnlDstAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxIpTnlDstAddrEntry contains information about a single destination address in an IP Tunnel." INDEX { svcId, sapPortId, sapEncapValue, tmnxIpTunnelName, tmnxIpTnlDstAddrType, tmnxIpTnlDstAddr } ::= { tmnxIpTnlDstAddrTable 1 } TmnxIpTnlDstAddrEntry ::= SEQUENCE { tmnxIpTnlDstAddrType InetAddressType, tmnxIpTnlDstAddr InetAddress, tmnxIpTnlDstAddrRowStatus RowStatus, tmnxIpTnlDstAddrLastChanged TimeStamp, tmnxIpTnlDstAddrResolved TruthValue } tmnxIpTnlDstAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxIpTnlDstAddrType specifies the address type of address in tmnxIpTnlDstAddr." ::= { tmnxIpTnlDstAddrEntry 1 } tmnxIpTnlDstAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxIpTnlDstAddr specifies the address of the destination of this IP tunnel." ::= { tmnxIpTnlDstAddrEntry 2 } tmnxIpTnlDstAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The tmnxIpTnlDstAddrRowStatus object is used to create and delete rows in the tmnxIpTnlDstAddrTable." ::= { tmnxIpTnlDstAddrEntry 3 } tmnxIpTnlDstAddrLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlDstAddrLastChanged indicates the sysUpTime at the time of the last modification of this entry." ::= { tmnxIpTnlDstAddrEntry 4 } tmnxIpTnlDstAddrResolved OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlDstAddrResolved indicates whether or not this IP tunnel destination address has been resolved as reachable by the virtual router." ::= { tmnxIpTnlDstAddrEntry 5 } tmnxIpTunnelStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxIpTunnelStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxIpTunnelStatsTable contains statistics entries per IP tunnel." ::= { tmnxSapObjs 145 } tmnxIpTunnelStatsEntry OBJECT-TYPE SYNTAX TmnxIpTunnelStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxIpTunnelStatsEntry contains statistics information for a single IP Tunnel." INDEX { svcId, sapPortId, sapEncapValue, tmnxIpTunnelName } ::= { tmnxIpTunnelStatsTable 1 } TmnxIpTunnelStatsEntry ::= SEQUENCE { tmnxIpTunnelPktsTx Counter64, tmnxIpTunnelPktsTxLo Counter32, tmnxIpTunnelPktsTxHi Counter32, tmnxIpTunnelPktsRx Counter64, tmnxIpTunnelPktsRxLo Counter32, tmnxIpTunnelPktsRxHi Counter32, tmnxIpTunnelBytesTx Counter64, tmnxIpTunnelBytesTxLo Counter32, tmnxIpTunnelBytesTxHi Counter32, tmnxIpTunnelBytesRx Counter64, tmnxIpTunnelBytesRxLo Counter32, tmnxIpTunnelBytesRxHi Counter32, tmnxIpTunnelTxErrors Counter32, tmnxIpTunnelRxErrors Counter32, tmnxIpTunnelKeyIgnoredRx Counter64, tmnxIpTunnelKeyIgnoredRxLo Counter32, tmnxIpTunnelKeyIgnoredRxHi Counter32, tmnxIpTunnelSeqIgnoredRx Counter64, tmnxIpTunnelSeqIgnoredRxLo Counter32, tmnxIpTunnelSeqIgnoredRxHi Counter32, tmnxIpTunnelVersUnsupRx Counter64, tmnxIpTunnelVersUnsupRxLo Counter32, tmnxIpTunnelVersUnsupRxHi Counter32, tmnxIpTunnelInvalidChksumRx Counter64, tmnxIpTunnelInvalidChksumRxLo Counter32, tmnxIpTunnelInvalidChksumRxHi Counter32, tmnxIpTunnelLoopsRx Counter64, tmnxIpTunnelLoopsRxLo Counter32, tmnxIpTunnelLoopsRxHi Counter32, tmnxIpTunnelTooBigTx Counter64, tmnxIpTunnelTooBigTxLo Counter32, tmnxIpTunnelTooBigTxHi Counter32, tmnxIpTunnelKeyMismatchRx Counter64, tmnxIpTunnelEncapOverhead Unsigned32, tmnxIpTunnelPreEncapFragCount Counter64, tmnxIpTunnelPreEncapFragLastSize Unsigned32, tmnxIpTunnelPostEncapFragCount Counter64, tmnxIpTunnelPostEncapFragLstSize Unsigned32, tmnxIpTunnelTempPrivMtu Unsigned32 } tmnxIpTunnelPktsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPktsTx indicates the number of packets this IP Tunnel has sent." ::= { tmnxIpTunnelStatsEntry 1 } tmnxIpTunnelPktsTxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPktsTxLo indicates lower 32 bits of the value of tmnxIpTunnelPktsTx object." ::= { tmnxIpTunnelStatsEntry 2 } tmnxIpTunnelPktsTxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPktsTxHi indicates higher 32 bits of the value of tmnxIpTunnelPktsTx object." ::= { tmnxIpTunnelStatsEntry 3 } tmnxIpTunnelPktsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPktsRx indicates the number of packets this IP Tunnel has received." ::= { tmnxIpTunnelStatsEntry 4 } tmnxIpTunnelPktsRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPktsRxLo indicates lower 32 bits of the value of tmnxIpTunnelPktsRx object." ::= { tmnxIpTunnelStatsEntry 5 } tmnxIpTunnelPktsRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPktsRxHi indicates higher 32 bits of the value of tmnxIpTunnelPktsRx object." ::= { tmnxIpTunnelStatsEntry 6 } tmnxIpTunnelBytesTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelBytesTx indicates the number of bytes this IP Tunnel has sent." ::= { tmnxIpTunnelStatsEntry 7 } tmnxIpTunnelBytesTxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelBytesTxLo indicates lower 32 bits of the value of tmnxIpTunnelBytesTx object." ::= { tmnxIpTunnelStatsEntry 8 } tmnxIpTunnelBytesTxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelBytesTxHi indicates higher 32 bits of the value of tmnxIpTunnelBytesTx object." ::= { tmnxIpTunnelStatsEntry 9 } tmnxIpTunnelBytesRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelBytesRx indicates the number of bytes this IP Tunnel has received." ::= { tmnxIpTunnelStatsEntry 10 } tmnxIpTunnelBytesRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelBytesRxLo indicates lower 32 bits of the value of tmnxIpTunnelBytesRx object." ::= { tmnxIpTunnelStatsEntry 11 } tmnxIpTunnelBytesRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelBytesRxHi indicates higher 32 bits of the value of tmnxIpTunnelBytesRx object." ::= { tmnxIpTunnelStatsEntry 12 } tmnxIpTunnelTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelTxErrors indicates the number of packet transmit errors." ::= { tmnxIpTunnelStatsEntry 13 } tmnxIpTunnelRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelRxErrors indicates the number of packet receive errors." ::= { tmnxIpTunnelStatsEntry 14 } tmnxIpTunnelKeyIgnoredRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelKeyIgnoredRx indicates the number of packets this IP Tunnel received and processed ignoring key field." ::= { tmnxIpTunnelStatsEntry 15 } tmnxIpTunnelKeyIgnoredRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelKeyIgnoredRxLo indicates lower 32 bits of the value of tmnxIpTunnelKeyIgnoredRx object." ::= { tmnxIpTunnelStatsEntry 16 } tmnxIpTunnelKeyIgnoredRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelKeyIgnoredRxHi indicates higher 32 bits of the value of tmnxIpTunnelKeyIgnoredRx object." ::= { tmnxIpTunnelStatsEntry 17 } tmnxIpTunnelSeqIgnoredRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelSeqIgnoredRx indicates the number of packets this IP Tunnel and processed ignoring sequence field." ::= { tmnxIpTunnelStatsEntry 18 } tmnxIpTunnelSeqIgnoredRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelSeqIgnoredRxLo indicates lower 32 bits of the value of tmnxIpTunnelSeqIgnoredRx object." ::= { tmnxIpTunnelStatsEntry 19 } tmnxIpTunnelSeqIgnoredRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelSeqIgnoredRxHi indicates higher 32 bits of the value of tmnxIpTunnelSeqIgnoredRx object." ::= { tmnxIpTunnelStatsEntry 20 } tmnxIpTunnelVersUnsupRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelVersUnsupRx indicates the number of packets this IP Tunnel received with unsupported IP version and were dropped." ::= { tmnxIpTunnelStatsEntry 21 } tmnxIpTunnelVersUnsupRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelVersUnsupRxLo indicates lower 32 bits of the value of tmnxIpTunnelVersUnsupRx object." ::= { tmnxIpTunnelStatsEntry 22 } tmnxIpTunnelVersUnsupRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelVersUnsupRxHi indicates higher 32 bits of the value of tmnxIpTunnelVersUnsupRx object." ::= { tmnxIpTunnelStatsEntry 23 } tmnxIpTunnelInvalidChksumRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelInvalidChksumRx indicates the number of packets this IP Tunnel received with invalid checksum and were dropped." ::= { tmnxIpTunnelStatsEntry 24 } tmnxIpTunnelInvalidChksumRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelInvalidChksumRxLo indicates lower 32 bits of the value of tmnxIpTunnelInvalidChksumRx object." ::= { tmnxIpTunnelStatsEntry 25 } tmnxIpTunnelInvalidChksumRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelInvalidChksumRxHi indicates higher 32 bits of the value of tmnxIpTunnelInvalidChksumRx object." ::= { tmnxIpTunnelStatsEntry 26 } tmnxIpTunnelLoopsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelLoopsRx indicates the number of packets this IP Tunnel received with payload with destination address which could result in a loop and were dropped." ::= { tmnxIpTunnelStatsEntry 27 } tmnxIpTunnelLoopsRxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelLoopsRxLo indicates lower 32 bits of the value of tmnxIpTunnelLoopsRx object." ::= { tmnxIpTunnelStatsEntry 28 } tmnxIpTunnelLoopsRxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelLoopsRxHi indicates higher 32 bits of the value of tmnxIpTunnelLoopsRx object." ::= { tmnxIpTunnelStatsEntry 29 } tmnxIpTunnelTooBigTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelTooBigTx indicates the number of packets this IP Tunnel received which were too big to transmit." ::= { tmnxIpTunnelStatsEntry 30 } tmnxIpTunnelTooBigTxLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelTooBigTxLo indicates lower 32 bits of the value of tmnxIpTunnelTooBigTx object." ::= { tmnxIpTunnelStatsEntry 31 } tmnxIpTunnelTooBigTxHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelTooBigTxHi indicates higher 32 bits of the value of tmnxIpTunnelTooBigTx object." ::= { tmnxIpTunnelStatsEntry 32 } tmnxIpTunnelKeyMismatchRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelKeyMismatchRx indicates the number of packets this IP Tunnel received with key mismatch." ::= { tmnxIpTunnelStatsEntry 33 } tmnxIpTunnelEncapOverhead OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelEncapOverhead indicates the encapsulation overhead for this IP Tunnel." ::= { tmnxIpTunnelStatsEntry 34 } tmnxIpTunnelPreEncapFragCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPreEncapFragCount indicates the number of fragmentations that occurred prior to encapsulation for this IP Tunnel. Pre-encapsulation fragmentation occurs for IPv4 packets whose size exceeds tmnxIpTunnelIpMtu." ::= { tmnxIpTunnelStatsEntry 35 } tmnxIpTunnelPreEncapFragLastSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPreEncapFragLastSize indicates the size of the last packet which caused a pre-encapsulation fragmentation to occur for this IP Tunnel." ::= { tmnxIpTunnelStatsEntry 36 } tmnxIpTunnelPostEncapFragCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPostEncapFragCount indicates the number of fragmentations that occurred after encapsulation for this IP Tunnel. Post-encapsulation fragmentation occurs when the encapsulated packet size exceeds tmnxIpTunnelEncapIpMtu." ::= { tmnxIpTunnelStatsEntry 37 } tmnxIpTunnelPostEncapFragLstSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelPostEncapFragLstSize indicates the size of the last encapsulated packet which caused a post-encapsulation fragmentation to occur for this IP Tunnel." ::= { tmnxIpTunnelStatsEntry 38 } tmnxIpTunnelTempPrivMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTunnelTempPrivMtu indicates the size of temporary private MTU for this IP Tunnel." ::= { tmnxIpTunnelStatsEntry 39 } sapExtTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapExtTableLastChanged indicates the sysUpTime at the time of the last modification to sapExtTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 146 } sapExtTable OBJECT-TYPE SYNTAX SEQUENCE OF SapExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapExtTable contains additional entries specific to SAPs in the system." ::= { tmnxSapObjs 147 } sapExtEntry OBJECT-TYPE SYNTAX SapExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapExtEntry contains additional information about a single SAP entry." AUGMENTS { sapBaseInfoEntry } ::= { sapExtTable 1 } SapExtEntry ::= SEQUENCE { sapExtLastChanged TimeStamp, sapExtLagActivePort TmnxPortID, sapDCpuProtPolicy TNamedItemOrEmpty, sapCflowd INTEGER, sapStatHostMacLearnOptions BITS, sapBandwidth Unsigned32, sapOperDCpuProtPolicy TNamedItemOrEmpty, sapIngQGrpRedirectList TNamedItemOrEmpty, sapEgrQGrpRedirectList TNamedItemOrEmpty, sapEgrQosQueueOvrHsSecShaper TNamedItemOrEmpty, sapFwdWhlSaleEpipeSvcId TmnxServId, sapIngressQinqTranslation INTEGER, sapIngressQinqInnerTranslationId Integer32, sapIngressQinqOuterTranslationId Integer32, sapBandwidthHi Unsigned32, sapEgressQosVlanQosPlcy TLNamedItemOrEmpty, sapIngQtagManipulationOuterTag Integer32, sapIngQtagManipulationInnerTag Integer32, sapIngQtagManipulationAction TmnxSapQtagManipulationAction, sapEgrQtagManipulationAction TmnxSapQtagManipulationAction, sapEgressQosEgrRemarkPlcy TLNamedItemOrEmpty, sapEgressAggRateCIRLmt Integer32, sapIngressAggregatePolicerRateHi TmnxHigh32, sapIngressAggregatePolicerRateLo TmnxLow32, sapIngressAggregatePolicerBurst Integer32, sapIngressAggregatePolicerCIRHi TmnxHigh32, sapIngressAggregatePolicerCIRLo TmnxLow32, sapIngressAggregatePolicerCBS Integer32, sapIngressIPCriteriaOvrTag Integer32, sapIngressIPv6CriteriaOvrTag Integer32, sapEgrVlanQosPlcyPortRedirect TruthValue, sapIngressIpFilterPair TruthValue } sapExtLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapExtLastChanged indicates the sysUpTime at the time of the last modification of this entry." ::= { sapExtEntry 1 } sapExtLagActivePort OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapExtLagActivePort indicates a port on the lag associated with this SAP, that is used when tLagPerLinkHash is enabled on the lag or when sapLagLinkMapProfile is configured on this SAP." ::= { sapExtEntry 2 } sapDCpuProtPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapDCpuProtPolicy associates Distributed CPU Protection Policy with a SAP." DEFVAL { ''H } ::= { sapExtEntry 3 } sapCflowd OBJECT-TYPE SYNTAX INTEGER { none (1), ingressOnly (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapCflowd specifies the type and direction of Cflowd analysis applied to this SAP. A Cflowd profile controls the sampling and analysis of data flows through the service. A value of 'none (1)' indicates that there is no Cflowd analysis associated with this SAP." DEFVAL { none } ::= { sapExtEntry 4 } sapStatHostMacLearnOptions OBJECT-TYPE SYNTAX BITS { singleMac (0), dataTriggered (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHostMacLearnOptions applies to the static hosts of this SAP. When the 'singleMac' option is set, this system ensures that there is at any time only a single MAC address per SAP, learned through ICMPv6. When the 'dataTriggered' option is set, MAC learning is also triggered by data packets, as opposed to only by subscriber control plane packets such as DHCP or ARP. A bit in this object can only be set for a SAP in a group interface, that is each row in the sapBaseInfoTable where the value of sapIesIfIndex corresponds to a row in the vRtrIfTable where the value of vRtrIfType is equal to 'serviceIesGroup' or 'serviceVprnGroup'." DEFVAL { {} } ::= { sapExtEntry 5 } sapBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapBandwidth specifies the administrative bandwidth assigned to this SAP entry." DEFVAL { 0 } ::= { sapExtEntry 6 } sapOperDCpuProtPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapOperDCpuProtPolicy indicates the Operational Distributed CPU Protection Policy." ::= { sapExtEntry 7 } sapIngQGrpRedirectList OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQGrpRedirectList specifies the queue-group redirect list applied to the ingress SAP. This object is only supported for interface SAP within an IES or VPRN service." DEFVAL { ''H } ::= { sapExtEntry 8 } sapEgrQGrpRedirectList OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQGrpRedirectList specifies the queue-group redirect list applied to the egress SAP. This object is only supported for interface SAP within an IES or VPRN service." DEFVAL { ''H } ::= { sapExtEntry 9 } sapEgrQosQueueOvrHsSecShaper OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosQueueOvrHsSecShaper specifies the HS secondary shaper applied to this SAP. The value must correspond to an entry in the TIMETRA-PORT-MIB::tPortHsSecShapTable. If the empty string (default value) is specified, then the default secondary shaper will be used." DEFVAL { "" } ::= { sapExtEntry 10 } sapFwdWhlSaleEpipeSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapFwdWhlSaleEpipeSvcId specifies the EPIPE service to which PPPoE packets on ingress with ether-types 0x8863 and 0x8864 will be redirected." DEFVAL { 0 } ::= { sapExtEntry 12 } sapIngressQinqTranslation OBJECT-TYPE SYNTAX INTEGER { none (1), qinqIds (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressQinqTranslation specifies the desired Ingress Qinq Vlan Translation. A value of 'qinqIds' specifies that the value of sapIngressQinqInnerTranslationId and sapIngressQinqOuterTranslationId is to be used to overwrite the preserved qinq id's in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressQinqTranslation to 'qinqIds' and sapIngressQinqInnerTranslationId and sapIngressQinqOuterTranslationId are set to '-1'." DEFVAL { none } ::= { sapExtEntry 13 } sapIngressQinqInnerTranslationId OBJECT-TYPE SYNTAX Integer32 (-1 | 0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressQinqInnerTranslationId specifies the inner ingress vlan translation for two service delimiting vlan values." DEFVAL { -1 } ::= { sapExtEntry 14 } sapIngressQinqOuterTranslationId OBJECT-TYPE SYNTAX Integer32 (-1 | 0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressQinqOuterTranslationId specifies the outer ingress vlan translation for two service delimiting vlan values." DEFVAL { -1 } ::= { sapExtEntry 15 } sapBandwidthHi OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapBandwidthHi specifies the upper 32-bit value of administrative bandwidth assigned to this SAP entry. An 'inconsistentValue' error is returned when this object is changed to non-default value and sapBandwidth value is not set in the same pdu." DEFVAL { 0 } ::= { sapExtEntry 16 } sapEgressQosVlanQosPlcy OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressQosVlanQosPlcy specifies the name to associate with this SAP." DEFVAL { "default" } ::= { sapExtEntry 17 } sapIngQtagManipulationOuterTag OBJECT-TYPE SYNTAX Integer32 (-1 | 0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQtagManipulationOuterTag specifies a valid outer q-tag to be used at SAP ingress by action indicated by sapIngQtagManipulationAction. Value -1 indicates sapIngQtagManipulationOuterTag is not applicable and should not be used." DEFVAL { -1 } ::= { sapExtEntry 18 } sapIngQtagManipulationInnerTag OBJECT-TYPE SYNTAX Integer32 (-1 | 0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQtagManipulationInnerTag specifies a valid inner q-tag to be used at SAP ingress by action indicated by sapIngQtagManipulationAction. Value -1 indicates sapIngQtagManipulationInnerTag is not applicable and should not be used." DEFVAL { -1 } ::= { sapExtEntry 19 } sapIngQtagManipulationAction OBJECT-TYPE SYNTAX TmnxSapQtagManipulationAction MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngQtagManipulationAction specifies the action to manipulate the q-tag(s) of the packets at SAP ingress. The action uses a valid value of sapIngQtagManipulationOuterTag for outer q-tag and and a valid value of sapIngQtagManipulationInnerTag for inner q-tag. Value replaceAndPushOuter (8) is not applicable to ingress, therefore it is not allowed to be assigned to sapIngQtagManipulationAction. sapIngQtagManipulationAction is initialized to notApplicable (0) on SAPs that don't support q-tag manipulation, and thus not allowed to change. sapIngQtagManipulationAction is only applicable and changeable when TIMETRA-SERV-MIB::svcType is epipe or vpls and TIMETRA-PORT-MIB::tmnxPortEncapType is nullEncap or qEncap or qinqEncap. The default depends on the value of the objects TIMETRA-PORT-MIB::tmnxPortEncapType and TIMETRA-SAP-MIB::sapEncapValue." ::= { sapExtEntry 20 } sapEgrQtagManipulationAction OBJECT-TYPE SYNTAX TmnxSapQtagManipulationAction MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQtagManipulationAction specifies the action to manipulate the q-tag(s) of the packets at SAP egress. Unlike ingress, at egress the action uses the vlan-id of the SAP for inner and outer q-tag to push or replace. Value popOuterAndReplaceInner (5) is not applicable to egress, therefore it is not allowed to be assigned to sapEgrQtagManipulationAction. sapEgrQtagManipulationAction is initialized to notApplicable (0) on SAPs that don't support q-tag manipulation, and thus not allowed to change. sapEgrQtagManipulationAction is only applicable and changeable when TIMETRA-SERV-MIB::svcType is epipe or vpls and TIMETRA-PORT-MIB::tmnxPortEncapType is nullEncap or qEncap or qinqEncap. The default depends on the value of the objects TIMETRA-PORT-MIB::tmnxPortEncapType and TIMETRA-SAP-MIB::sapEncapValue." ::= { sapExtEntry 21 } sapEgressQosEgrRemarkPlcy OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressQosEgrRemarkPlcy specifies the name to associate with this SAP." DEFVAL { "default" } ::= { sapExtEntry 22 } sapEgressAggRateCIRLmt OBJECT-TYPE SYNTAX Integer32 (-1..400000000) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgressAggRateCIRLmt specifies the aggregate CIR rate of all egress queues for this SAP." DEFVAL { 0 } ::= { sapExtEntry 23 } sapIngressAggregatePolicerRateHi OBJECT-TYPE SYNTAX TmnxHigh32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressAggregatePolicerRateHi specifies the upper 32 bits of the rate to be used in kbps. This value should always be set along with sapIngressAggregatePolicerRateLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngressAggregatePolicerRateHi along with the value of sapIngressAggregatePolicerRateLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate." DEFVAL { 4294967295 } ::= { sapExtEntry 82 } sapIngressAggregatePolicerRateLo OBJECT-TYPE SYNTAX TmnxLow32 (144..1000000000 | 4294967295) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressAggregatePolicerRateLo specifies the lower 32 bits of the rate to be used in kbps. This value should always be set along with sapIngressAggregatePolicerRateHi, otherwise an 'inconsistentValue' error is returned. When the value of sapIngressAggregatePolicerRateHi along with the value of sapIngressAggregatePolicerRateLo is set to 4294967295 (0xFFFFFFFF), rate for this policer indicates maximum rate." DEFVAL { 4294967295 } ::= { sapExtEntry 83 } sapIngressAggregatePolicerBurst OBJECT-TYPE SYNTAX Integer32 (-1 | 1..33292) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressAggregatePolicerBurst specifies the burst to be used. The value -1 means maximum burst." DEFVAL { -1 } ::= { sapExtEntry 84 } sapIngressAggregatePolicerCIRHi OBJECT-TYPE SYNTAX TmnxHigh32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressAggregatePolicerCIRHi specifies the upper 32 bits of the rate to be used in kbps. This value should always be set along with sapIngressAggregatePolicerCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngressAggregatePolicerCIRHi along with the value of sapIngressAggregatePolicerCIRLo is set to 4294967295 (0xFFFFFFFF), cir for this policer indicates maximum cir. When the value of sapIngressAggregatePolicerCIRHi is set to a value of 4294967295 (0xFFFFFFFF) along with sapIngressAggregatePolicerCIRLo is set to 4294967294 (0xFFFFFFFE), cir is not configured for this policer. Operational cir: +------------------+-------------+ | cir Hi/Lo | Oper cir | +------------------+-------------+ | 0xFFFFFFFF (Hi) | max rate | | 0xFFFFFFFF (Lo) | | +------------------+-------------+ | 0xFFFFFFFF (Hi) | cir = pir | | 0xFFFFFFFE (Lo) | | +------------------+-------------+" DEFVAL { 4294967295 } ::= { sapExtEntry 85 } sapIngressAggregatePolicerCIRLo OBJECT-TYPE SYNTAX TmnxLow32 (0..1000000000 | 4294967295 | 4294967294) UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressAggregatePolicerCIRLo specifies the lower 32 bits of the rate to be used in kbps. This value should always be set along with sapIngressAggregatePolicerCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of sapIngressAggregatePolicerCIRHi along with the value of sapIngressAggregatePolicerCIRLo is set to 4294967295 (0xFFFFFFFF), cir for this policer indicates maximum cir. When the value of sapIngressAggregatePolicerCIRHi is set to a value of 4294967295 (0xFFFFFFFF) along with sapIngressAggregatePolicerCIRLo is set to 4294967294 (0xFFFFFFFE), cir is not configured for this policer. Operational cir: +------------------+-------------+ | cir Hi/Lo | Oper cir | +------------------+-------------+ | 0xFFFFFFFF (Hi) | max rate | | 0xFFFFFFFF (Lo) | | +------------------+-------------+ | 0xFFFFFFFF (Hi) | cir = pir | | 0xFFFFFFFE (Lo) | | +------------------+-------------+" DEFVAL { 4294967294 } ::= { sapExtEntry 86 } sapIngressAggregatePolicerCBS OBJECT-TYPE SYNTAX Integer32 (-2 | -1 | 1..33292) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressAggregatePolicerCBS specifies the cbs to be used. The value -1 means maximum cbs, value -2 means sapIngressAggregatePolicerCBS is not configured for this policer Operational cbs: +------------------+-------------+ | cbs | Oper cbs | +------------------+-------------+ | -1 | max rate | +------------------+-------------+ | -2 | cbs = mbs | +------------------+-------------+" DEFVAL { -2 } ::= { sapExtEntry 87 } sapIngressIPCriteriaOvrTag OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressIPCriteriaOvrTag specifies the tag-id for the IP Criteria override. A value of 0 means no ip-criteria override." DEFVAL { 0 } ::= { sapExtEntry 88 } sapIngressIPv6CriteriaOvrTag OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapIngressIPv6CriteriaOvrTag specifies the tag-id for the IPv6 Criteria override. A value of 0 means no ipv6-criteria override." DEFVAL { 0 } ::= { sapExtEntry 89 } sapEgrVlanQosPlcyPortRedirect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrVlanQosPlcyPortRedirect specifies whether port redirect is enabled with the vlan qos policy configured in sapEgressQosVlanQosPlcy." DEFVAL { false } ::= { sapExtEntry 90 } sapIngressIpFilterPair OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapIngressIpFilterPair specifies if ip filter pair has been enabled or disabled." DEFVAL { false } ::= { sapExtEntry 91 } sapDcpFpStaticStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SapDcpFpStaticStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapDcpFpStaticStatTable has the statistics information of the static-policer configured on Distributed CPU Protection Policy per SAP per forwarding plane." ::= { tmnxSapObjs 148 } sapDcpFpStaticStatEntry OBJECT-TYPE SYNTAX SapDcpFpStaticStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDcpFpStaticStatEntry represents statistics information per SAP per forwarding plane for the static-policer configured on Distributed CPU Protection Policy." INDEX { svcId, sapPortId, sapEncapValue, tmnxChassisIndex, tmnxCardSlotNum, tmnxFPNum, sapDcpFpStaticPlcrName } ::= { sapDcpFpStaticStatTable 1 } SapDcpFpStaticStatEntry ::= SEQUENCE { sapDcpFpStaticPlcrName TNamedItem, sapDcpFpStaticState TmnxDistCpuProtState, sapDcpFpStaticExcdCount Counter64, sapDcpFpStaticExcdCountHi Counter32, sapDcpFpStaticExcdCountLo Counter32, sapDcpFpStaticHoldDown TmnxDistCpuProtActionDuration, sapDcpFpStaticDetectionTime Unsigned32 } sapDcpFpStaticPlcrName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDcpFpStaticPlcrName specifies the static-policer name for Distributed CPU Protection Policy." ::= { sapDcpFpStaticStatEntry 1 } sapDcpFpStaticState OBJECT-TYPE SYNTAX TmnxDistCpuProtState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpStaticState indicates the state of the static-policer configured on Distributed CPU Protection Policy." ::= { sapDcpFpStaticStatEntry 2 } sapDcpFpStaticExcdCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpStaticExcdCount indicates number of packets exceeding the policing parameters since the given static-policer was previously declared as conformant or newly instantiated." ::= { sapDcpFpStaticStatEntry 3 } sapDcpFpStaticExcdCountHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpStaticExcdCountHi indicates upper 32-bits of sapDcpFpStaticExcdCount." ::= { sapDcpFpStaticStatEntry 4 } sapDcpFpStaticExcdCountLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpStaticExcdCountLo indicates lower 32-bits of sapDcpFpStaticExcdCount." ::= { sapDcpFpStaticStatEntry 5 } sapDcpFpStaticHoldDown OBJECT-TYPE SYNTAX TmnxDistCpuProtActionDuration UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpStaticHoldDown indicates the remaining hold-down period for a given static-policer." ::= { sapDcpFpStaticStatEntry 6 } sapDcpFpStaticDetectionTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpStaticDetectionTime indicates the detection time remaining for a given static-policer." ::= { sapDcpFpStaticStatEntry 7 } sapDcpFpDynStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SapDcpFpDynStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapDcpFpDynStatTable has the statistics information of the dynamic policer for a particular protocol configured on Distributed CPU Protection Policy per SAP per forwarding plane." ::= { tmnxSapObjs 149 } sapDcpFpDynStatEntry OBJECT-TYPE SYNTAX SapDcpFpDynStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDcpFpDynStatEntry represents statistics information per SAP per forwarding plane for the dynamic policer for a particular protocol configured on Distributed CPU Protection Policy." INDEX { svcId, sapPortId, sapEncapValue, tmnxChassisIndex, tmnxCardSlotNum, tmnxFPNum, sapDcpFpProtocol } ::= { sapDcpFpDynStatTable 1 } SapDcpFpDynStatEntry ::= SEQUENCE { sapDcpFpProtocol TmnxDistCpuProtProtocolId, sapDcpFpDynState TmnxDistCpuProtState, sapDcpFpDynExcdCount Counter64, sapDcpFpDynExcdCountHi Counter32, sapDcpFpDynExcdCountLo Counter32, sapDcpFpDynHoldDown TmnxDistCpuProtActionDuration, sapDcpFpDynDetectionTime Unsigned32, sapDcpFpDynAllocated TruthValue } sapDcpFpProtocol OBJECT-TYPE SYNTAX TmnxDistCpuProtProtocolId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDcpFpProtocol specifies the protocol name to be monitored by Distributed CPU Protection Policy." ::= { sapDcpFpDynStatEntry 1 } sapDcpFpDynState OBJECT-TYPE SYNTAX TmnxDistCpuProtState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpDynState indicates the state of the dynamic policer for a particular protocol configured on Distributed CPU Protection Policy." ::= { sapDcpFpDynStatEntry 2 } sapDcpFpDynExcdCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpDynExcdCount indicates number of packets exceeding the policing parameters since the dynamic policer for the given protocol was previously declared as conformant or newly instantiated." ::= { sapDcpFpDynStatEntry 3 } sapDcpFpDynExcdCountHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpDynExcdCountHi indicates upper 32-bits of sapDcpFpDynExcdCount." ::= { sapDcpFpDynStatEntry 4 } sapDcpFpDynExcdCountLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpDynExcdCountLo indicates lower 32-bits of sapDcpFpDynExcdCount." ::= { sapDcpFpDynStatEntry 5 } sapDcpFpDynHoldDown OBJECT-TYPE SYNTAX TmnxDistCpuProtActionDuration UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpDynHoldDown indicates the remaining hold-down period for the dynamic policer for a given protocol." ::= { sapDcpFpDynStatEntry 6 } sapDcpFpDynDetectionTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpDynDetectionTime indicates the detection time remaining for the dynamic policer for a given protocol." ::= { sapDcpFpDynStatEntry 7 } sapDcpFpDynAllocated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpDynAllocated indicates whether dynamic policer has been allocated for this protocol." ::= { sapDcpFpDynStatEntry 8 } sapDcpFpLocMonStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SapDcpFpLocMonStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapDcpFpLocMonStatTable has the statistics information of the local-monitoring policer configured on Distributed CPU Protection Policy per SAP per forwarding plane." ::= { tmnxSapObjs 150 } sapDcpFpLocMonStatEntry OBJECT-TYPE SYNTAX SapDcpFpLocMonStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDcpFpLocMonStatTable represents statistics information per SAP per forwarding plane for the local-monitoring policer configured on Distributed CPU Protection Policy." INDEX { svcId, sapPortId, sapEncapValue, tmnxChassisIndex, tmnxCardSlotNum, tmnxFPNum, sapDcpFpLocMonPlcrName } ::= { sapDcpFpLocMonStatTable 1 } SapDcpFpLocMonStatEntry ::= SEQUENCE { sapDcpFpLocMonPlcrName TNamedItem, sapDcpFpLocMonState TmnxDistCpuProtState, sapDcpFpLocMonExcdCount Counter64, sapDcpFpLocMonExcdCountHi Counter32, sapDcpFpLocMonExcdCountLo Counter32, sapDcpFpLocMonAllDynAlloc TruthValue } sapDcpFpLocMonPlcrName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDcpFpLocMonPlcrName specifies the local monitoring policy name for Distributed CPU Protection Policy." ::= { sapDcpFpLocMonStatEntry 1 } sapDcpFpLocMonState OBJECT-TYPE SYNTAX TmnxDistCpuProtState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpLocMonState indicates the state of the local-monitoring policer configured on Distributed CPU Protection Policy." ::= { sapDcpFpLocMonStatEntry 2 } sapDcpFpLocMonExcdCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpLocMonExcdCount indicates number of packets exceeding the policing parameters since the given local-monitoring policer was previously declared as conformant or newly instantiated." ::= { sapDcpFpLocMonStatEntry 3 } sapDcpFpLocMonExcdCountHi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpLocMonExcdCountHi indicates upper 32-bits of sapDcpFpLocMonExcdCount." ::= { sapDcpFpLocMonStatEntry 4 } sapDcpFpLocMonExcdCountLo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpLocMonExcdCountLo indicates lower 32-bits of sapDcpFpLocMonExcdCount." ::= { sapDcpFpLocMonStatEntry 5 } sapDcpFpLocMonAllDynAlloc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDcpFpLocMonAllDynAlloc indicates whether all the dynamic policers associated with this local-monitor have been allocated." ::= { sapDcpFpLocMonStatEntry 6 } sapNotificationObjects OBJECT IDENTIFIER ::= { tmnxSapObjs 151 } sapDcpTimeEventOccured OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sapDcpTimeEventOccured indicates the actual time the event was detected in the system which may differ from the time that event was collected by the logging infrastructure." ::= { sapNotificationObjects 1 } sapTlsStaticIsidRngTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsStaticIsidRngEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the static ISID range information for SAPs." ::= { tmnxSapObjs 152 } sapTlsStaticIsidRngEntry OBJECT-TYPE SYNTAX SapTlsStaticIsidRngEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry maintains the static range information for a specific SAP in a specific VPLS service ." INDEX { svcId, sapPortId, sapEncapValue, sapTlsStaticIsidRngId } ::= { sapTlsStaticIsidRngTable 1 } SapTlsStaticIsidRngEntry ::= SEQUENCE { sapTlsStaticIsidRngId Unsigned32, sapTlsStaticIsidRngRowStatus RowStatus, sapTlsStaticIsidRngLastChanged TimeStamp, sapTlsStaticIsidRngLow TmnxISID, sapTlsStaticIsidRngHigh TmnxISID } sapTlsStaticIsidRngId OBJECT-TYPE SYNTAX Unsigned32 (1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapTlsStaticIsidRngId specifies the range identifier for the ISID policy." ::= { sapTlsStaticIsidRngEntry 1 } sapTlsStaticIsidRngRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTlsStaticIsidRngRowStatus is used for the creation and deletion of rows in this table." ::= { sapTlsStaticIsidRngEntry 2 } sapTlsStaticIsidRngLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsStaticIsidRngLastChanged indicates the timestamp of last change to this row in sapTlsStaticIsidRngTable." ::= { sapTlsStaticIsidRngEntry 3 } sapTlsStaticIsidRngLow OBJECT-TYPE SYNTAX TmnxISID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTlsStaticIsidRngLow specifies the low value of the range for this entry." DEFVAL { 0 } ::= { sapTlsStaticIsidRngEntry 4 } sapTlsStaticIsidRngHigh OBJECT-TYPE SYNTAX TmnxISID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapTlsStaticIsidRngHigh specifies the high value of the range for this entry." DEFVAL { 0 } ::= { sapTlsStaticIsidRngEntry 5 } sapTlsDhcp6InfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsDhcp6InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapTlsDhcp6InfoTable contains DHCP6 information related to a TLS SAP. This table augments the sapTlsDhcpInfoTable, and contains an entry for each TLS SAP. Rows in this table are created and deleted automatically by the system." ::= { tmnxSapObjs 153 } sapTlsDhcp6InfoEntry OBJECT-TYPE SYNTAX SapTlsDhcp6InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP6 specific information for a TLS SAP." AUGMENTS { sapTlsDhcpInfoEntry } ::= { sapTlsDhcp6InfoTable 1 } SapTlsDhcp6InfoEntry ::= SEQUENCE { sapTlsDhcp6AdminState TmnxEnabledDisabled, sapTlsDhcp6Description ServObjDesc, sapTlsDhcp6Snoop TmnxEnabledDisabled, sapTlsDhcp6InterfaceId INTEGER, sapTlsDhcp6RemoteId INTEGER, sapTlsDhcp6RemoteIdString DisplayString } sapTlsDhcp6AdminState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcp6AdminState specifies the overall enabled/disabled state of all DHCP6 related actions on this SAP. The value 'disabled' allows the user to configure individual DHCP6 commands but administratively disables them." DEFVAL { disabled } ::= { sapTlsDhcp6InfoEntry 1 } sapTlsDhcp6Description OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcp6Description specifies a user provided description for DHCP6 on this SAP. It consists of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } ::= { sapTlsDhcp6InfoEntry 2 } sapTlsDhcp6Snoop OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcp6Snoop specifies the enabled/disabled state for DHCP6 snooping on this SAP. Note that in order for snooping to be enabled the object sapTlsDhcp6AdminState must also have the value enabled." DEFVAL { disabled } ::= { sapTlsDhcp6InfoEntry 3 } sapTlsDhcp6InterfaceId OBJECT-TYPE SYNTAX INTEGER { asciiTuple (1), vlanAsciiTuple (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcp6InterfaceId specifies the content of the interface id option (18): - 'asciiTuple' the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - SAP ID is used. - 'vlanAsciiTuple' the format will include VLAN ID and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only." REFERENCE "Lightweight DHCPv6 Relay Agent draft-ietf-dhc-dhcpv6-ldra-03 paragraph 5.3.2" DEFVAL { asciiTuple } ::= { sapTlsDhcp6InfoEntry 4 } sapTlsDhcp6RemoteId OBJECT-TYPE SYNTAX INTEGER { none (1), mac (2), remote-id (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcp6RemoteId specifies the presence and contents of the remote-id option (37): - 'none' the remote-id option will not be included in the RELAY-FORW (12) message. - 'mac' the MAC address of the remote end. - 'remote-id' the value of the object sapTlsDhcp6RemoteIdString." REFERENCE "RFC 4649 paragraph 3" DEFVAL { none } ::= { sapTlsDhcp6InfoEntry 5 } sapTlsDhcp6RemoteIdString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sapTlsDhcp6RemoteIdString specifies the remote-id. This object has a non empty value only if the object sapTlsDhcp6RemoteId has a value of 'remote-id'." DEFVAL { "" } ::= { sapTlsDhcp6InfoEntry 6 } sapTlsStaticIsidTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsStaticIsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the information for each static ISID for SAPs." ::= { tmnxSapObjs 154 } sapTlsStaticIsidEntry OBJECT-TYPE SYNTAX SapTlsStaticIsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry maintains the information for a specific ISID associated with the specific SAP in a specific VPLS service. Entries are created and deleted by the system." INDEX { svcId, sapPortId, sapEncapValue, sapTlsStaticIsid } ::= { sapTlsStaticIsidTable 1 } SapTlsStaticIsidEntry ::= SEQUENCE { sapTlsStaticIsid TmnxISID, sapTlsStaticIsidStatus TmnxIsidMFibStatus } sapTlsStaticIsid OBJECT-TYPE SYNTAX TmnxISID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapTlsStaticIsid indicates ISID of this entry." ::= { sapTlsStaticIsidEntry 1 } sapTlsStaticIsidStatus OBJECT-TYPE SYNTAX TmnxIsidMFibStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsStaticIsidStatus indicates the MFIB status of this ISID." ::= { sapTlsStaticIsidEntry 2 } sapEthLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEthLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table sapEthLoopbackTable provides operators with the ability to provide loopback functions on a specific SAP in order to test Ethernet Virtual Circuits (EVC)." ::= { tmnxSapObjs 155 } sapEthLoopbackEntry OBJECT-TYPE SYNTAX SapEthLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an active SAP loopback. The SAP is placed in loopback by row creation and is removed by row destruction. Rows in table sapEthLoopbackTable are created and destroyed by SNMP set operations on the object sapEthLoopbackRowStatus. Rows in table sapEthLoopbackTable may be destroyed by the system when the associated SAP has been deleted. A maximum of 64 rows may be created. Rows are kept in volatile storage and lost upon a system reboot." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapEthLoopbackTable 1 } SapEthLoopbackEntry ::= SEQUENCE { sapEthLoopbackRowStatus RowStatus, sapEthLoopbackMode INTEGER, sapEthLoopbackMacSwap TmnxEnabledDisabled, sapEthLoopbackMacSwapAddr MacAddress, sapEthLoopbackMacSwapAddrAll TruthValue, sapEthLoopbackOperState ServiceOperStatus } sapEthLoopbackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapEthLoopbackRowStatus specifies the row status. It allows entries to be created and deleted in sapEthLoopbackTable. Rows are created by specifying the value 'createAndGo(4)' and deleted by specifying the value 'destroy(6)'. If the associated SAP is deleted, the sapEthLoopbackEntry row will be deleted by the system. Row creation will fail if the service identifier and the SAP do not exist in MIB table sapBaseInfoTable with a sapType of 'epipe(1)' or 'tls(3)', which encompasses EPIPE, PBB (Provider Backbone Bridging) EPIPE, VPLS (Virtual Private LAN Service), and I-VPLS services." ::= { sapEthLoopbackEntry 1 } sapEthLoopbackMode OBJECT-TYPE SYNTAX INTEGER { ingress (1), egress (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapEthLoopbackMode specifies how traffic will be reflected. If the value is set to 'ingress(1)', traffic arriving at the SAP ingress will be reflected back out the same SAP. If the value is set to 'egress(2)', traffic arriving at the SAP egress will be reflected back into the service in the direction of the original source." ::= { sapEthLoopbackEntry 2 } sapEthLoopbackMacSwap OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapEthLoopbackMacSwap specifies the enabling or disabling of source address and destination address swapping for the reflected packets when the arriving packet is unicast. With sapEthLoopbackMacSwap enabled, any broadcast or multicast packets arriving on a looped point will be dropped." DEFVAL { disabled } ::= { sapEthLoopbackEntry 3 } sapEthLoopbackMacSwapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapEthLoopbackMacSwapAddr specifies the source MAC address used in the reflected packet when the arriving packet is broadcast or multicast. This does not apply to arriving unicast packets." DEFVAL { '000000000000'H } ::= { sapEthLoopbackEntry 4 } sapEthLoopbackMacSwapAddrAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapEthLoopbackMacSwapAddrAll specifies whether or not to use the configured sapEthLoopbackMacSwapAddr as the source address for all reflected parameters." DEFVAL { false } ::= { sapEthLoopbackEntry 5 } sapEthLoopbackOperState OBJECT-TYPE SYNTAX ServiceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapEthLoopbackOperState indicates operational status of the active SAP loopback." ::= { sapEthLoopbackEntry 6 } sapTlsFdbMacStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapTlsFdbMacStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the count of MAC address entries per FDB type for the SAPs in VPLS services." ::= { tmnxSapObjs 156 } sapTlsFdbMacStatsEntry OBJECT-TYPE SYNTAX SapTlsFdbMacStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry maintains the count of MAC address entries per FDB type for the SAP in a VPLS service." INDEX { svcId, sapPortId, sapEncapValue, tlsFdbType } ::= { sapTlsFdbMacStatsTable 1 } SapTlsFdbMacStatsEntry ::= SEQUENCE { sapTlsFdbMacStatsNumEntries Unsigned32 } sapTlsFdbMacStatsNumEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsFdbMacStatsNumEntries indicates the number of MAC address entries of the FDB type in the SAP in this service." ::= { sapTlsFdbMacStatsEntry 1 } tmnxSapTlsExInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxSapTlsExInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an augment of the sapTlsInfoTable table. Rows are created and destroyed automatically by the system." ::= { tmnxSapObjs 157 } tmnxSapTlsExInfoEntry OBJECT-TYPE SYNTAX TmnxSapTlsExInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about a SAP." AUGMENTS { sapTlsInfoEntry } ::= { tmnxSapTlsExInfoTable 1 } TmnxSapTlsExInfoEntry ::= SEQUENCE { tmnxSapTlsExLastChanged TimeStamp, tmnxSapTlsExDhcpPythonPolicy TNamedItemOrEmpty, tmnxSapTlsExDhcp6PythonPolicy TNamedItemOrEmpty, tmnxSapTlsExRtrSolMsapTrigger TruthValue, tmnxSapTlsExRtrSolUserDb TNamedItemOrEmpty, tmnxSapTlsExProcCpmTrfcSapDn TmnxEnabledDisabled, tmnxSapTlsExDiameterAuthPolicy TNamedItemOrEmpty, tmnxSapTlsExPppoePythonPolicy TNamedItemOrEmpty, tmnxSapTlsExAllowDot1qMsap TruthValue, tmnxSapTlsExEgressDestMac MacAddress, sapTlsDisableSendBvplsEvpnFlush TruthValue, sapTlsAutoLrnMacProtectExcList TNamedItemOrEmpty, sapTlsExBgpVplsMhVeId TmnxVeId } tmnxSapTlsExLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value tmnxSapTlsExLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this row." ::= { tmnxSapTlsExInfoEntry 1 } tmnxSapTlsExDhcpPythonPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExDhcpPythonPolicy specifies the name of the Python policy used for DHCP discover on this SAP. The Python policy referenced here needs to exist in the TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable." DEFVAL { "" } ::= { tmnxSapTlsExInfoEntry 2 } tmnxSapTlsExDhcp6PythonPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExDhcp6PythonPolicy specifies the name of the Python policy used for DHCP6 solicit on this SAP. The Python policy referenced here needs to exist in the TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable." DEFVAL { "" } ::= { tmnxSapTlsExInfoEntry 3 } tmnxSapTlsExRtrSolMsapTrigger OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExRtrSolMsapTrigger specifies whether the receipt of router solicit trigger packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value tmnxSapTlsExRtrSolMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error." DEFVAL { false } ::= { tmnxSapTlsExInfoEntry 4 } tmnxSapTlsExRtrSolUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExRtrSolUserDb specifies the local user database to use for router solicit based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of tmnxSapTlsExRtrSolUserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { tmnxSapTlsExInfoEntry 5 } tmnxSapTlsExProcCpmTrfcSapDn OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExProcCpmTrfcSapDn is applicable to simple SAPs configured on simple LAGs that are not part of any 'endpoint' configurations or complicated resiliency schemes like MC-LAG with inter-chassis-backup (ICB) configurations. When enabled, a simple LAG SAP will not be removed from the forwarding plane and flooded traffic (unknown unicast, broadcast and multicast) will be dropped on egress rather than ingress.This allows control traffic to be extracted on egress and where applicable processed by the CPM. The value of tmnxSapTlsExProcCpmTrfcSapDn will not prevent a VPLS service from entering an Operational Down state if it is the last active connection to enter a non-operational state. By default, without this value, when a LAG enters a non-operational state it is removed from the forwarding plane and traffic is dropped on ingress." DEFVAL { disabled } ::= { tmnxSapTlsExInfoEntry 6 } tmnxSapTlsExDiameterAuthPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExDiameterAuthPolicy specifies the name of the Diameter NASREQ application policy used for authentication. A non empty value is only allowed for a SAP with a sapSubType value of 'capture'. A non empty value must correspond to a row in the TIMETRA-DIAMETER-MIB::tmnxDiamApNqTable." DEFVAL { "" } ::= { tmnxSapTlsExInfoEntry 7 } tmnxSapTlsExPppoePythonPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExPppoePythonPolicy specifies the Python policy used for modifying PPPoE packets on this SAP. A non empty value is only allowed for a SAP with a sapSubType value of 'capture'. A nonzero value must correspond to a row in the TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable." DEFVAL { "" } ::= { tmnxSapTlsExInfoEntry 8 } tmnxSapTlsExAllowDot1qMsap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapTlsExAllowDot1qMsap specifies if this system allows the creation of IEEE 802.1q encapsulated management SAPs while this capture SAP is on an IEEE 802.1ad port. An attempt to set the value tmnxSapTlsExAllowDot1qMsap to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error. If this SAP is a capture SAP on an IEEE 802.1q port, the value of tmnxSapTlsExAllowDot1qMsap is ignored." DEFVAL { false } ::= { tmnxSapTlsExInfoEntry 9 } tmnxSapTlsExEgressDestMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object tmnxSapTlsExEgressDestMac specifies the MAC address used to overwrite the destination mac address for all unicast packets egressing the given SAP." DEFVAL { '000000000000'H } ::= { tmnxSapTlsExInfoEntry 10 } sapTlsDisableSendBvplsEvpnFlush OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsDisableSendBvplsEvpnFlush specifies whether to send an ISID based CMAC flush indication when the sap goes oper-down." DEFVAL { false } ::= { tmnxSapTlsExInfoEntry 11 } sapTlsAutoLrnMacProtectExcList OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sapTlsAutoLrnMacProtectExcList specifies mac-list name which contains MAC addresses to be excluded from auto learn mac protect" DEFVAL { "" } ::= { tmnxSapTlsExInfoEntry 12 } sapTlsExBgpVplsMhVeId OBJECT-TYPE SYNTAX TmnxVeId MAX-ACCESS read-write STATUS current DESCRIPTION "The sapTlsExBgpVplsMhVeId specifies BGP-VPLS multi-homing virtual edge identifier range." DEFVAL { -1 } ::= { tmnxSapTlsExInfoEntry 13 } sapLagPerLinkHashTableLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapLagPerLinkHashTableLastChgd indicates the sysUpTime at the time of the last modification to sapLagPerLinkHashTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 158 } sapLagPerLinkHashTable OBJECT-TYPE SYNTAX SEQUENCE OF SapLagPerLinkHashEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapLagPerLinkHashTable maintains weighted per-link-hash related lag attributes per SAP. A LAG that has weighted per link hash enabled, will use the class and weight associated with the SAP to select a link for egress traffic over this SAP. Selection is done such that within each class the total weight of all SAPs/Users on each LAG link is as close as possible to other links in the LAG." ::= { tmnxSapObjs 159 } sapLagPerLinkHashEntry OBJECT-TYPE SYNTAX SapLagPerLinkHashEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapLagPerLinkHashEntry maintains weighted per-link-hash related lag attributes for specific SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapLagPerLinkHashTable 1 } SapLagPerLinkHashEntry ::= SEQUENCE { sapLagPerLinkHashLastChanged TimeStamp, sapLagPerLinkHashClass TmnxLagPerLinkHashClass, sapLagPerLinkHashWeight TmnxLagPerLinkHashWeight, sapLagPerLinkHashOperClass TmnxLagPerLinkHashClass, sapLagPerLinkHashOperWeight TmnxLagPerLinkHashWeight, sapLagPerLinkHashIsOverriden TruthValue } sapLagPerLinkHashLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapLagPerLinkHashLastChanged indicates the sysUpTime at the time of the last modification of this entry." ::= { sapLagPerLinkHashEntry 1 } sapLagPerLinkHashClass OBJECT-TYPE SYNTAX TmnxLagPerLinkHashClass MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapLagPerLinkHashClass specifies the class to be used to select a LAG link for this SAP." DEFVAL { 1 } ::= { sapLagPerLinkHashEntry 2 } sapLagPerLinkHashWeight OBJECT-TYPE SYNTAX TmnxLagPerLinkHashWeight MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapLagPerLinkHashWeight specifies the weight to be associated with this SAP when selecting a LAG link for this SAP." DEFVAL { 1 } ::= { sapLagPerLinkHashEntry 3 } sapLagPerLinkHashOperClass OBJECT-TYPE SYNTAX TmnxLagPerLinkHashClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapLagPerLinkHashOperClass indicates the operational value for class associated with this SAP." ::= { sapLagPerLinkHashEntry 4 } sapLagPerLinkHashOperWeight OBJECT-TYPE SYNTAX TmnxLagPerLinkHashWeight MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapLagPerLinkHashOperWeight indicates the operational value used for weight associated with this SAP." ::= { sapLagPerLinkHashEntry 5 } sapLagPerLinkHashIsOverriden OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapLagPerLinkHashIsOverriden indicates whether administrative values, subscriber management determined operational weight and class are used for this SAP." ::= { sapLagPerLinkHashEntry 6 } tmnxSapIpoeTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapIpoeTableLastChanged indicates the sysUpTime at the time of the most recent change to the tmnxSapIpoeTable." ::= { tmnxSapObjs 160 } tmnxSapIpoeTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxSapIpoeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxSapIpoeTable contains IPoE session information related to a SAP with a sapSubType value of 'capture'." ::= { tmnxSapObjs 161 } tmnxSapIpoeEntry OBJECT-TYPE SYNTAX TmnxSapIpoeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to IPoE session for a SAP with a sapSubType value of 'capture'." INDEX { svcId, sapPortId, sapEncapValue } ::= { tmnxSapIpoeTable 1 } TmnxSapIpoeEntry ::= SEQUENCE { tmnxSapIpoeLastChanged TimeStamp, tmnxSapIpoeAdminState TmnxEnabledDisabled, tmnxSapIpoeDescription TItemDescription, tmnxSapIpoePolicy TNamedItemOrEmpty, tmnxSapIpoeUserDb TNamedItemOrEmpty } tmnxSapIpoeLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapIpoeLastChanged indicates the sysUpTime at the time of the most recent change to this table row." ::= { tmnxSapIpoeEntry 1 } tmnxSapIpoeAdminState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object tmnxSapIpoeAdminState specifies the desired administrative state of this row." DEFVAL { disabled } ::= { tmnxSapIpoeEntry 2 } tmnxSapIpoeDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object tmnxSapIpoeDescription specifies a user provided description for IPoE on this Sap." DEFVAL { "" } ::= { tmnxSapIpoeEntry 3 } tmnxSapIpoePolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapIpoePolicy specifies the IPoE policy applicable on this SAP." DEFVAL { "" } ::= { tmnxSapIpoeEntry 4 } tmnxSapIpoeUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxSapIpoeUserDb specifies the local user database to use for authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string." DEFVAL { "" } ::= { tmnxSapIpoeEntry 5 } tmnxStaticHostIpv6Objs OBJECT IDENTIFIER ::= { tmnxSapObjs 162 } sapStatHost6Table OBJECT-TYPE SYNTAX SEQUENCE OF SapStatHost6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapStatHost6Table is used to configure IPv6 static hosts on a SAP." ::= { tmnxStaticHostIpv6Objs 1 } sapStatHost6Entry OBJECT-TYPE SYNTAX SapStatHost6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information on a statically configured IPv6 host. Entries can be created and deleted via SNMP SET operations." INDEX { svcId, sapPortId, sapEncapValue, sapStatHost6IpAddress, sapStatHost6MacAddress } ::= { sapStatHost6Table 1 } SapStatHost6Entry ::= SEQUENCE { sapStatHost6IpAddress InetAddressIPv6, sapStatHost6MacAddress MacAddress, sapStatHost6LastChanged TimeStamp, sapStatHost6RowStatus RowStatus, sapStatHost6AdminStatus ServiceAdminStatus, sapStatHost6PrefixLen InetAddressPrefixLength, sapStatHost6NextHopAddrType InetAddressType, sapStatHost6NextHopAddr InetAddress, sapStatHost6SubscrIdent TmnxSubIdentStringOrEmpty, sapStatHost6SubProfile ServObjName, sapStatHost6SlaProfile ServObjName, sapStatHost6ShcvOperState ServShcvOperState, sapStatHost6ShcvChecks Unsigned32, sapStatHost6ShcvReplies Unsigned32, sapStatHost6ShcvReplyTime TimeStamp, sapStatHost6DynMacAddress MacAddress, sapStatHost6RetailerSvcId TmnxServId, sapStatHost6RetailerIf InterfaceIndexOrZero, sapStatHost6FwdingState TmnxOperState, sapStatHost6AncpString TmnxAncpStringOrZero, sapStatHost6SubIdIsSapId TruthValue, sapStatHost6AppProfile ServObjName, sapStatHost6IntermediateDestId DisplayString, sapStatHost6AdminRetailSvcId TmnxServId, sapStatHost6AppProfileScope TmnxSapAASubScope } sapStatHost6IpAddress OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapStatHost6IpAddress specifies the IP address of this static host." ::= { sapStatHost6Entry 1 } sapStatHost6MacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapStatHost6MacAddress specifies the MAC address associated with this static host. The value 0:0:0:0:0:0 specifies 'no MAC address'." ::= { sapStatHost6Entry 2 } sapStatHost6LastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStatHost6LastChanged indicates the sysUpTime at the time of the last modification of this conceptual row." ::= { sapStatHost6Entry 3 } sapStatHost6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStatHost6RowStatus controls the creation and deletion of rows in this table." ::= { sapStatHost6Entry 4 } sapStatHost6AdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6AdminStatus specifies the administrative status of this host." DEFVAL { down } ::= { sapStatHost6Entry 5 } sapStatHost6PrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength (32..64 | 128) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStatHost6PrefixLen specifies the IPv6 address prefix length associated with this host. A value for this object must be specified when the conceptual row is created, and it cannot be modified afterwards." ::= { sapStatHost6Entry 6 } sapStatHost6NextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6NextHopAddrType specifies the address type of sapStatHost6NextHopAddr." DEFVAL { unknown } ::= { sapStatHost6Entry 7 } sapStatHost6NextHopAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6NextHopAddr specifies the IPv4 next hop address of this IPv6 static host. A non-empty value of this object refers to the associated IPv4 host in a dual stack model. A MAC address learned from either IPv6 or IPv4 host is also associated with the other ('mac-linking')." DEFVAL { ''H } ::= { sapStatHost6Entry 8 } sapStatHost6SubscrIdent OBJECT-TYPE SYNTAX TmnxSubIdentStringOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStatHost6SubscrIdent specifies the subscriber identification for this static host." DEFVAL { "" } ::= { sapStatHost6Entry 9 } sapStatHost6SubProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStatHost6SubProfile specifies the subscriber profile for this static host. A non-empty value of this object must correspond to a conceptual row in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable." DEFVAL { "" } ::= { sapStatHost6Entry 10 } sapStatHost6SlaProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStatHost6SlaProfile specifies the SLA profile for this static host. A non-empty value of this object must correspond to a conceptual row in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable." DEFVAL { "" } ::= { sapStatHost6Entry 11 } sapStatHost6ShcvOperState OBJECT-TYPE SYNTAX ServShcvOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStatHost6ShcvOperState indicates the state of the subscriber host connectivity check for this static host." ::= { sapStatHost6Entry 12 } sapStatHost6ShcvChecks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStatHost6ShcvChecks indicates the number of connectivity checks for this static host." ::= { sapStatHost6Entry 13 } sapStatHost6ShcvReplies OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStatHost6ShcvReplies indicates the number of host replies for this static host." ::= { sapStatHost6Entry 14 } sapStatHost6ShcvReplyTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStatHost6ShcvReplyTime indicates the timestamp of the last successful connectivity check for this static host." ::= { sapStatHost6Entry 15 } sapStatHost6DynMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStatHost6DynMacAddress indicates the learned MAC address while sapStatHost6MacAddress is equal to 0:0:0:0:0:0. The value 0:0:0:0:0:0 indicates that no MAC address is learned yet." ::= { sapStatHost6Entry 16 } sapStatHost6RetailerSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStatHost6RetailerSvcId indicates the service ID of the retailer VPRN service to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN." ::= { sapStatHost6Entry 17 } sapStatHost6RetailerIf OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapStatHost6RetailerIf indicates the interface index of the retailer VPRN interface to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN." ::= { sapStatHost6Entry 18 } sapStatHost6FwdingState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStatHost6FwdingState indicates the forwarding state of this static host. When the value is 'outOfService', host traffic is not forwarded; while it is 'inService', host traffic is forwarded." ::= { sapStatHost6Entry 19 } sapStatHost6AncpString OBJECT-TYPE SYNTAX TmnxAncpStringOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6AncpString specifies the ancp-string associated to this SAP host." DEFVAL { "" } ::= { sapStatHost6Entry 20 } sapStatHost6SubIdIsSapId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapStatHost6SubIdIsSapId specifies if the SAP ID is taken as subscriber identification for this static host." DEFVAL { false } ::= { sapStatHost6Entry 21 } sapStatHost6AppProfile OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6AppProfile specifies the application profile for this static host. A non-empty value of this object must correspond to a conceptual row in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable." DEFVAL { "" } ::= { sapStatHost6Entry 22 } sapStatHost6IntermediateDestId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6IntermediateDestId specifies to which intermediate destination (for example a DSLAM) this host belongs." DEFVAL { "" } ::= { sapStatHost6Entry 23 } sapStatHost6AdminRetailSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6AdminRetailSvcId specifies the forwarding service ID for an unnumbered static host in a wholesale/retail context." DEFVAL { 0 } ::= { sapStatHost6Entry 24 } sapStatHost6AppProfileScope OBJECT-TYPE SYNTAX TmnxSapAASubScope MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6AppProfileScope specifies the scope of IPv6 static host application profile. The value of sapStatHost6AppProfileScope can only be set along with sapStatHost6AppProfile object, optionally. The value of sapStatHost6AppProfileScope cannot be modified once set." DEFVAL { subscriber } ::= { sapStatHost6Entry 25 } sapStatHost6MRtTable OBJECT-TYPE SYNTAX SEQUENCE OF SapStatHost6MRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapStatHost6MRtTable contains managed routes of SAP static IPv6 hosts. Entries can be created and deleted via SNMP SET operations." ::= { tmnxStaticHostIpv6Objs 2 } sapStatHost6MRtEntry OBJECT-TYPE SYNTAX SapStatHost6MRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information on a specific managed route." INDEX { svcId, sapPortId, sapEncapValue, sapStatHost6IpAddress, sapStatHost6MacAddress, sapStatHost6MRtAddrType, sapStatHost6MRtAddr, sapStatHost6MRtPrefixLen } ::= { sapStatHost6MRtTable 1 } SapStatHost6MRtEntry ::= SEQUENCE { sapStatHost6MRtAddrType InetAddressType, sapStatHost6MRtAddr InetAddress, sapStatHost6MRtPrefixLen InetAddressPrefixLength, sapStatHost6MRtRowStatus RowStatus, sapStatHost6MRtLastMgmtChange TimeStamp, sapStatHost6MRtStatus TmnxManagedRouteStatus, sapStatHost6MRtMetric Unsigned32, sapStatHost6MRtPreference Unsigned32, sapStatHost6MRtTag Unsigned32 } sapStatHost6MRtAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapStatHost6MRtAddrType indicates the address type of sapStatHost6MRtAddr." ::= { sapStatHost6MRtEntry 1 } sapStatHost6MRtAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapStatHost6MRtAddr indicates the IP address of the managed route." ::= { sapStatHost6MRtEntry 2 } sapStatHost6MRtPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapStatHost6MRtPrefixLen indicates the prefix length of the subnet associated with sapStatHost6MRtAddr." ::= { sapStatHost6MRtEntry 3 } sapStatHost6MRtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6MRtRowStatus controls the creation and deletion of rows in this table." ::= { sapStatHost6MRtEntry 4 } sapStatHost6MRtLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStatHost6MRtLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row." ::= { sapStatHost6MRtEntry 5 } sapStatHost6MRtStatus OBJECT-TYPE SYNTAX TmnxManagedRouteStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStatHost6MRtStatus indicates the state of this managed route." ::= { sapStatHost6MRtEntry 6 } sapStatHost6MRtMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6MRtMetric specifies the route metric." DEFVAL { 0 } ::= { sapStatHost6MRtEntry 7 } sapStatHost6MRtPreference OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6MRtPreference specifies the route preference. The value of the preference is compared with the preference of the routes coming from routing protocols." DEFVAL { 0 } ::= { sapStatHost6MRtEntry 8 } sapStatHost6MRtTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapStatHost6MRtTag specifies the route tag." DEFVAL { 0 } ::= { sapStatHost6MRtEntry 9 } sapStatHost6TableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStatHost6TableLastChanged indicates the sysUpTime at the time of the last modification to the sapStatHost6Table by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 163 } sapStatHost6MRtTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStatHost6MRtTblLastChgd indicates the sysUpTime at the time of the last modification of sapStatHost6MRtTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, this object contains a zero value." ::= { tmnxSapObjs 164 } sapIngQosQueueDepthInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosQueueDepthInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapIngQosQueueDepthInfoTable has an entry for each SAP ingress override queue for which the value of sapIngQosQMonitorDepth is set to 'true (1)'." ::= { tmnxSapObjs 165 } sapIngQosQueueDepthInfoEntry OBJECT-TYPE SYNTAX SapIngQosQueueDepthInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapIngQosQueueDepthInfoEntry represents queue depth monitoring information for SAP ingress override queue for which the value of sapIngQosQMonitorDepth is set to 'true (1)'." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosQueueId } ::= { sapIngQosQueueDepthInfoTable 1 } SapIngQosQueueDepthInfoEntry ::= SEQUENCE { sapIngQosQueueDepthPollPrcnt1 Unsigned32, sapIngQosQueueDepthPollPrcnt2 Unsigned32, sapIngQosQueueDepthPollPrcnt3 Unsigned32, sapIngQosQueueDepthPollPrcnt4 Unsigned32, sapIngQosQueueDepthPollPrcnt5 Unsigned32, sapIngQosQueueDepthPollPrcnt6 Unsigned32, sapIngQosQueueDepthPollPrcnt7 Unsigned32, sapIngQosQueueDepthPollPrcnt8 Unsigned32, sapIngQosQueueDepthPollPrcnt9 Unsigned32, sapIngQosQueueDepthPollPrcnt10 Unsigned32, sapIngQosQueueDepthAvgPollInt Unsigned32, sapIngQosQueueDepthAvgElpsdTme TimeStamp } sapIngQosQueueDepthPollPrcnt1 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt1 represents the percentage of polls in occupancy range of 0 to 10 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 1 } sapIngQosQueueDepthPollPrcnt2 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt2 represents the percentage of polls in occupancy range of 11 to 20 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 2 } sapIngQosQueueDepthPollPrcnt3 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt3 represents the percentage of polls in occupancy range of 21 to 30 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 3 } sapIngQosQueueDepthPollPrcnt4 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt4 represents the percentage of polls in occupancy range of 31 to 40 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 4 } sapIngQosQueueDepthPollPrcnt5 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt5 represents the percentage of polls in occupancy range of 41 to 50 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 5 } sapIngQosQueueDepthPollPrcnt6 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt6 represents the percentage of polls in occupancy range of 51 to 60 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 6 } sapIngQosQueueDepthPollPrcnt7 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt7 represents the percentage of polls in occupancy range of 61 to 70 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 7 } sapIngQosQueueDepthPollPrcnt8 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt8 represents the percentage of polls in occupancy range of 71 to 80 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 8 } sapIngQosQueueDepthPollPrcnt9 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt9 represents the percentage of polls in occupancy range of 81 to 90 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 9 } sapIngQosQueueDepthPollPrcnt10 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthPollPrcnt10 represents the percentage of polls in occupancy range of 91 to 100 percent for the queue depths seen during the polling elapsed time." ::= { sapIngQosQueueDepthInfoEntry 10 } sapIngQosQueueDepthAvgPollInt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthAvgPollInt represents the weighted average polling interval for the elapsed time." ::= { sapIngQosQueueDepthInfoEntry 11 } sapIngQosQueueDepthAvgElpsdTme OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapIngQosQueueDepthAvgElpsdTme represents the average elapsed time since the start of queue depth monitoring or the last monitoring clear." ::= { sapIngQosQueueDepthInfoEntry 12 } sapEgrQosQueueDepthInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosQueueDepthInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthInfoTable has an entry for each SAP egress override queue for which the value of sapEgrQosQMonitorDepth is set to 'true (1)'." ::= { tmnxSapObjs 166 } sapEgrQosQueueDepthInfoEntry OBJECT-TYPE SYNTAX SapEgrQosQueueDepthInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthInfoEntry represents queue depth monitoring information for SAP egress override queue for which the value of sapEgrQosQMonitorDepth is set to 'true (1)'." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosQueueId } ::= { sapEgrQosQueueDepthInfoTable 1 } SapEgrQosQueueDepthInfoEntry ::= SEQUENCE { sapEgrQosQueueDepthPollPrcnt1 Unsigned32, sapEgrQosQueueDepthPollPrcnt2 Unsigned32, sapEgrQosQueueDepthPollPrcnt3 Unsigned32, sapEgrQosQueueDepthPollPrcnt4 Unsigned32, sapEgrQosQueueDepthPollPrcnt5 Unsigned32, sapEgrQosQueueDepthPollPrcnt6 Unsigned32, sapEgrQosQueueDepthPollPrcnt7 Unsigned32, sapEgrQosQueueDepthPollPrcnt8 Unsigned32, sapEgrQosQueueDepthPollPrcnt9 Unsigned32, sapEgrQosQueueDepthPollPrcnt10 Unsigned32, sapEgrQosQueueDepthAvgPollInt Unsigned32, sapEgrQosQueueDepthAvgElpsdTme TimeStamp, sapEgrQosQueueDepthViolTotCnt Unsigned32, sapEgrQosQueueDepthViolLast TimeStamp, sapEgrQosQueueDepthHWMPollInt Unsigned32 } sapEgrQosQueueDepthPollPrcnt1 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt1 represents the percentage of polls in occupancy range of 0 to 10 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 1 } sapEgrQosQueueDepthPollPrcnt2 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt2 represents the percentage of polls in occupancy range of 11 to 20 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 2 } sapEgrQosQueueDepthPollPrcnt3 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt3 represents the percentage of polls in occupancy range of 21 to 30 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 3 } sapEgrQosQueueDepthPollPrcnt4 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt4 represents the percentage of polls in occupancy range of 31 to 40 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 4 } sapEgrQosQueueDepthPollPrcnt5 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt5 represents the percentage of polls in occupancy range of 41 to 50 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 5 } sapEgrQosQueueDepthPollPrcnt6 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt6 represents the percentage of polls in occupancy range of 51 to 60 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 6 } sapEgrQosQueueDepthPollPrcnt7 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt7 represents the percentage of polls in occupancy range of 61 to 70 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 7 } sapEgrQosQueueDepthPollPrcnt8 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt8 represents the percentage of polls in occupancy range of 71 to 80 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 8 } sapEgrQosQueueDepthPollPrcnt9 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt9 represents the percentage of polls in occupancy range of 81 to 90 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 9 } sapEgrQosQueueDepthPollPrcnt10 OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "centipercent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthPollPrcnt10 represents the percentage of polls in occupancy range of 91 to 100 percent for the queue depths seen during the polling elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 10 } sapEgrQosQueueDepthAvgPollInt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthAvgPollInt represents the weighted average polling interval for the elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 11 } sapEgrQosQueueDepthAvgElpsdTme OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthAvgElpsdTme represents the average elapsed time since the start of queue depth monitoring or the last monitoring clear." ::= { sapEgrQosQueueDepthInfoEntry 12 } sapEgrQosQueueDepthViolTotCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthViolTotCnt represents the total number of per hardware queue violation counts of the component queues." ::= { sapEgrQosQueueDepthInfoEntry 13 } sapEgrQosQueueDepthViolLast OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthViolLast represents the most recent violation last seen timestamp of the component queues." ::= { sapEgrQosQueueDepthInfoEntry 14 } sapEgrQosQueueDepthHWMPollInt OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosQueueDepthHWMPollInt represents the weighted average high-watermark polling interval for the elapsed time." ::= { sapEgrQosQueueDepthInfoEntry 15 } sapStaticHostRipTable OBJECT-TYPE SYNTAX SEQUENCE OF SapStaticHostRipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapStaticHostRipTable augments the sapStaticHostTable. This table contains the parameters used for RIP." ::= { tmnxSapObjs 167 } sapStaticHostRipEntry OBJECT-TYPE SYNTAX SapStaticHostRipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains parameters used for RIP." AUGMENTS { sapStaticHostEntry } ::= { sapStaticHostRipTable 1 } SapStaticHostRipEntry ::= SEQUENCE { sapStaticHostRipPlcyName TNamedItemOrEmpty, sapStaticHostRipListenerStatus TmnxRipListenerStatus } sapStaticHostRipPlcyName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStaticHostRipPlcyName indicates the RIP policy which is used to set up the RIP listener for this static host." ::= { sapStaticHostRipEntry 1 } sapStaticHostRipListenerStatus OBJECT-TYPE SYNTAX TmnxRipListenerStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapStaticHostRipListenerStatus indicates the status of the RIP listener." ::= { sapStaticHostRipEntry 2 } sapEvpnMHEthSegTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEvpnMHEthSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEvpnMHEthSegTable contains entries for ethernet segment information associated with a SAP." ::= { tmnxSapObjs 168 } sapEvpnMHEthSegEntry OBJECT-TYPE SYNTAX SapEvpnMHEthSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ethernet segment entry in the sapEvpnMHEthSegTable." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapEvpnMHEthSegTable 1 } SapEvpnMHEthSegEntry ::= SEQUENCE { sapEvpnMHEthSegName TNamedItemOrEmpty, sapEvpnMHEthSegStatus TmnxEvpnMHEthSegStatus } sapEvpnMHEthSegName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEvpnMHEthSegName indicates the ethernet segment name associated with the given SAP." ::= { sapEvpnMHEthSegEntry 1 } sapEvpnMHEthSegStatus OBJECT-TYPE SYNTAX TmnxEvpnMHEthSegStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEvpnMHEthSegStatus indicates the status of the ethernet segment associated with the given SAP." ::= { sapEvpnMHEthSegEntry 2 } sapDefHostExTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapDefHostExTableLastChanged indicates the value of sysUpTime at the time of the last modification of an conceptual row in the sapDefHostExTable." ::= { tmnxSapObjs 169 } sapDefHostExTable OBJECT-TYPE SYNTAX SEQUENCE OF SapDefHostExEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP default host information. Entries in this table can be created or deleted via SNMP operations. A row in this table can only be created for a SAP in a group interface, that is each row in the sapBaseInfoTable where the value of sapIesIfIndex corresponds to a row in the vRtrIfTable where the value of vRtrIfType is equal to 'serviceIesGroup' or 'serviceVprnGroup'." ::= { tmnxSapObjs 170 } sapDefHostExEntry OBJECT-TYPE SYNTAX SapDefHostExEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SAP default host specific information." INDEX { svcId, sapPortId, sapEncapValue, sapDefHostExSubnetAddrType, sapDefHostExSubnetAddr, sapDefHostExSubnetAddrPfxLen } ::= { sapDefHostExTable 1 } SapDefHostExEntry ::= SEQUENCE { sapDefHostExSubnetAddrType InetAddressType, sapDefHostExSubnetAddr InetAddress, sapDefHostExSubnetAddrPfxLen InetAddressPrefixLength, sapDefHostExRowStatus RowStatus, sapDefHostExLastChanged TimeStamp, sapDefHostExNextHopAddrType InetAddressType, sapDefHostExNextHopAddr InetAddress } sapDefHostExSubnetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDefHostExSubnetAddrType indicates the address type of sapDefHostExSubnetAddr." ::= { sapDefHostExEntry 1 } sapDefHostExSubnetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object sapDefHostExSubnetAddr specifies the IPv4 Subnet or IPv6 Prefix address for this SAP default host. It must be equal to one of the addresses of the subscriber interface this SAP belongs to, that is one of its vRiaIpAddress values." ::= { sapDefHostExEntry 2 } sapDefHostExSubnetAddrPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapDefHostExSubnetAddrPfxLen indicates the IPv4 Subnet or IPv6 Prefix length of sapDefHostExSubnetAddr." ::= { sapDefHostExEntry 3 } sapDefHostExRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapDefHostExRowStatus specifies the row status of this row." ::= { sapDefHostExEntry 4 } sapDefHostExLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapDefHostExLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row." ::= { sapDefHostExEntry 5 } sapDefHostExNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapDefHostExNextHopAddrType specifies the address type of sapDefHostExNextHopAddr." ::= { sapDefHostExEntry 6 } sapDefHostExNextHopAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapDefHostExNextHopAddr specifies the next-hop IP address for this SAP default host. The value all zeroes is not allowed. A value for sapDefHostExNextHopAddr must be specified when a row is created and this value cannot be changed afterwards." ::= { sapDefHostExEntry 7 } tmnxSapDataTrigStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxSapDataTrigStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxSapDataTrigStatsTable contains detailed statistics information about the data triggers involved in creating data-triggered subscriber hosts. The typical usage of this table is to fill in the part of the index that identifies a SAP, and perform a partial walk to get all the statistics applicable to that SAP." ::= { tmnxSapObjs 171 } tmnxSapDataTrigStatsEntry OBJECT-TYPE SYNTAX TmnxSapDataTrigStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row contains detailed data trigger statistics information about a SAP. Entries in this table are created and removed automatically by the system The system creates conceptual rows in this table only for SAPs where the value of sapStatHostMacLearnOptions is equal to 'dataTriggered'. The system does not create rows unless there is at least one non-zero counter." INDEX { svcId, sapPortId, sapEncapValue, tmnxSapDataTrigStatsId } ::= { tmnxSapDataTrigStatsTable 1 } TmnxSapDataTrigStatsEntry ::= SEQUENCE { tmnxSapDataTrigStatsId Unsigned32, tmnxSapDataTrigStatsName DisplayString, tmnxSapDataTrigStatsVal Counter64 } tmnxSapDataTrigStatsId OBJECT-TYPE SYNTAX Unsigned32 (0..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxSapDataTrigStatsId indicates the identifier of the SAP data trigger statistics contained in this conceptual row. It is a meaningless number generated by this system." ::= { tmnxSapDataTrigStatsEntry 1 } tmnxSapDataTrigStatsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxSapDataTrigStatsName indicates the human-readable identifier of the statistics contained in this conceptual row." ::= { tmnxSapDataTrigStatsEntry 2 } tmnxSapDataTrigStatsVal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxSapDataTrigStatsVal indicates the value of the statistics contained in this conceptual row." ::= { tmnxSapDataTrigStatsEntry 3 } sapL3LoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF SapL3LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table sapL3LoopbackTable provides operators with the ability to provide loopback functions on a specific interface." ::= { tmnxSapObjs 172 } sapL3LoopbackEntry OBJECT-TYPE SYNTAX SapL3LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an active interface loopback. The interface is placed in loopback by row creation and is removed by row destruction. Rows in table sapL3LoopbackTable are created and destroyed by SNMP set operations on the object sapL3LoopbackRowStatus. Rows in table sapL3LoopbackTable may be destroyed by the system when the associated SAP has been deleted. A maximum of 64 rows may be created. Rows are kept in volatile storage and lost upon a system reboot." INDEX { svcId, sapIesIfIndex } ::= { sapL3LoopbackTable 1 } SapL3LoopbackEntry ::= SEQUENCE { sapL3LoopbackRowStatus RowStatus, sapL3LoopbackIgnrPortOpState ServiceOperStatus } sapL3LoopbackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sapL3LoopbackRowStatus specifies the row status. It allows entries to be created and deleted in sapL3LoopbackTable. Creation of an entry with VPRN or IES IP interface configured over an Ethernet SAP to mask a non-operational port state for the interface. When this entry is created with an interface, it will mask the ports non-operational state but continue to execute all other functions to determine if the IP interface should be considered operationally up for reachability testing. This is applicable to IP interfaces within a VPRN and IES service configured on an Ethernet SAP." ::= { sapL3LoopbackEntry 1 } sapL3LoopbackIgnrPortOpState OBJECT-TYPE SYNTAX ServiceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object specifies the operational state of the ignore sap port state operation." ::= { sapL3LoopbackEntry 2 } sapL2tpv3TableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapL2tpv3TableLastChanged indicates the value of sysUpTime at the time of the last modification of an conceptual row in the sapL2tpv3Table." ::= { tmnxSapObjs 173 } sapL2tpv3Table OBJECT-TYPE SYNTAX SEQUENCE OF SapL2tpv3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP L2TPV3 information. Entries in this table can be created or deleted via SNMP operations." ::= { tmnxSapObjs 174 } sapL2tpv3Entry OBJECT-TYPE SYNTAX SapL2tpv3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SAP L2TPV3 specific information." INDEX { svcId, sapPortId, sapEncapValue } ::= { sapL2tpv3Table 1 } SapL2tpv3Entry ::= SEQUENCE { sapL2tpv3RowStatus RowStatus, sapL2tpv3LastChanged TimeStamp, sapL2tpv3ServiceId TmnxServId, sapL2tpv3RouterId TmnxVRtrIDOrZero, sapL2tpv3TunnelGroupName TmnxL2tpTunnelGroupNameOrEmpty, sapL2tpv3VcId TmnxVcIdOrNone, sapL2tpv3PwType INTEGER, sapL2tpv3AdminState TmnxAdminState, sapL2tpv3OperState ServiceOperStatus, sapL2tpv3TunnelStatus INTEGER, sapL2tpv3OperFlags BITS, sapL2tpv3LastOperChgd TimeStamp, sapL2tpv3HostISA TmnxHwIndexOrZero, sapL2tpv3EthVlanQtag QTagFullRangeOrNone, sapL2tpv3ServiceName TLNamedItemOrEmpty } sapL2tpv3RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapL2tpv3RowStatus specifies the row status of this row." ::= { sapL2tpv3Entry 1 } sapL2tpv3LastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapL2tpv3LastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row." ::= { sapL2tpv3Entry 2 } sapL2tpv3ServiceId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The sapL2tpv3ServiceId specifies the routing context which provides reachability to the L2TPV3 tunnel group configured in the sapL2tpv3TunnelGroupName objects. While sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId are set to default, L2TPV3 tunnels will fail to come up. Only one of sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId may be set to non-default." DEFVAL { 0 } ::= { sapL2tpv3Entry 3 } sapL2tpv3RouterId OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The sapL2tpv3RouterId specifies the routing context that provides reachability to the L2TPV3 tunnel group configured in the sapL2tpv3TunnelGroupName object. While sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId are set to default, L2TPV3 tunnels will fail to come up. Only one of sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId may be set to non-default." DEFVAL { 0 } ::= { sapL2tpv3Entry 4 } sapL2tpv3TunnelGroupName OBJECT-TYPE SYNTAX TmnxL2tpTunnelGroupNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapL2tpv3TunnelGroupName specifies the L2TP tunnel-group name associated with this L2TPV3 entry." DEFVAL { ''H } ::= { sapL2tpv3Entry 5 } sapL2tpv3VcId OBJECT-TYPE SYNTAX TmnxVcIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapL2tpv3VcId specifies the virtual circuit identifier associated with this L2TPV3 entry." DEFVAL { 0 } ::= { sapL2tpv3Entry 6 } sapL2tpv3PwType OBJECT-TYPE SYNTAX INTEGER { none (0), ethernet (1), ethVlan (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The sapL2tpv3PwType specifies the pseudo-wire type associated with this L2TPV3 entry." DEFVAL { none } ::= { sapL2tpv3Entry 7 } sapL2tpv3AdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The sapL2tpv3AdminState specifies the adminstrative state of this entry." DEFVAL { outOfService } ::= { sapL2tpv3Entry 8 } sapL2tpv3OperState OBJECT-TYPE SYNTAX ServiceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The sapL2tpv3OperState indicates the operational status of this entry." ::= { sapL2tpv3Entry 9 } sapL2tpv3TunnelStatus OBJECT-TYPE SYNTAX INTEGER { down (1), inprogress (2), connected (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The sapL2tpv3TunnelStatus indicates the state of the L2tpv3 tunnel." ::= { sapL2tpv3Entry 10 } sapL2tpv3OperFlags OBJECT-TYPE SYNTAX BITS { sapDown (0), routerUnreachable (1), adminDown (2), tunnelNotUnique (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The sapL2tpv3OperFlags indicates the reason why the L2tpv3 tunnel is operationally down." ::= { sapL2tpv3Entry 11 } sapL2tpv3LastOperChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The sapL2tpv3LastOperChgd indicates the sysUpTime at the time of the last operational status change of this entry." ::= { sapL2tpv3Entry 12 } sapL2tpv3HostISA OBJECT-TYPE SYNTAX TmnxHwIndexOrZero MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The sapL2tpv3HostISA indicates the active ISA that is being used to host this L2tpv3 tunnel. This object will have a value of zero when this tunnel is operationally down." ::= { sapL2tpv3Entry 13 } sapL2tpv3EthVlanQtag OBJECT-TYPE SYNTAX QTagFullRangeOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The sapL2tpv3EthVlanQtag specifies the qtag id associated to the ethernet vlan pseudo-wire type." DEFVAL { -1 } ::= { sapL2tpv3Entry 14 } sapL2tpv3ServiceName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The sapL2tpv3ServiceName specifies the routing context which provides reachability to the L2TPV3 tunnel group configured in the sapL2tpv3TunnelGroupName objects. While sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId are set to default, L2TPV3 tunnels will fail to come up. Only one of sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId may be set to non-default." DEFVAL { ''H } ::= { sapL2tpv3Entry 15 } sapEgrQosHsWrrGrpTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosHsWrrGrpTblLastChanged indicates the sysUpTime at the time of the last modification of a row in sapEgrQosHsWrrGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSapObjs 175 } sapEgrQosHsWrrGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SapEgrQosHsWrrGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sapEgrQosHsWrrGrpTable is used to override the HS WRR (Weighted Round Robin) group information, as defined in the associated HS WRR Group on sap-egress policies." ::= { tmnxSapObjs 176 } sapEgrQosHsWrrGrpEntry OBJECT-TYPE SYNTAX SapEgrQosHsWrrGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of this table override the corresponding values defined for the specifies SAP of a particular HS WRR Group specified by sapEgrQosHsWrrGrpId." INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosHsWrrGrpId } ::= { sapEgrQosHsWrrGrpTable 1 } SapEgrQosHsWrrGrpEntry ::= SEQUENCE { sapEgrQosHsWrrGrpId Unsigned32, sapEgrQosHsWrrGrpRowStatus RowStatus, sapEgrQosHsWrrGrpLastChanged TimeStamp, sapEgrQosHsWrrGrpRate THPolPIRRateOverride, sapEgrQosHsWrrGrpRatePercent TPIRPercentOverride, sapEgrQosHsWrrGrpClassWeight Integer32 } sapEgrQosHsWrrGrpId OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sapEgrQosHsWrrGrpId specifies the identifier of the HS WRR Group whose objects are to be overridden." ::= { sapEgrQosHsWrrGrpEntry 1 } sapEgrQosHsWrrGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosHsWrrGrpRowStatus controls the creation and deletion of rows in this table." ::= { sapEgrQosHsWrrGrpEntry 2 } sapEgrQosHsWrrGrpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapEgrQosHsWrrGrpLastChanged indicates the value of sysUpTime at the time of the last management change of any writable object of this row." ::= { sapEgrQosHsWrrGrpEntry 3 } sapEgrQosHsWrrGrpRate OBJECT-TYPE SYNTAX THPolPIRRateOverride UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosHsWrrGrpRate specifies the group rate. This object overrides TIMETRA-QOS-MIB::tSapEgressHsWrrGrpRate." DEFVAL { -2 } ::= { sapEgrQosHsWrrGrpEntry 4 } sapEgrQosHsWrrGrpRatePercent OBJECT-TYPE SYNTAX TPIRPercentOverride UNITS "centipercent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosHsWrrGrpRatePercent specifies the group rate percent. This object overrides TIMETRA-QOS-MIB::tSapEgressHsWrrGrpRatePercent." DEFVAL { -2 } ::= { sapEgrQosHsWrrGrpEntry 5 } sapEgrQosHsWrrGrpClassWeight OBJECT-TYPE SYNTAX Integer32 (-2 | 1 | 2 | 4 | 8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sapEgrQosHsWrrGrpClassWeight specifies the weight of scheduling class. This object overrides TIMETRA-QOS-MIB::tSapEgressHsWrrGrpClassWeight." DEFVAL { -2 } ::= { sapEgrQosHsWrrGrpEntry 6 } tmnxSapPfcpTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapPfcpTableLastChanged indicates the sysUpTime at the time of the most recent change to the tmnxSapPfcpTable." ::= { tmnxSapObjs 177 } tmnxSapPfcpTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxSapPfcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxSapPfcpTable contains Packet Forwarding Control Plane information related to a SAP with a sapSubType value of 'capture'." ::= { tmnxSapObjs 178 } tmnxSapPfcpEntry OBJECT-TYPE SYNTAX TmnxSapPfcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to PFCP for a SAP with a sapSubType value of 'capture'." INDEX { svcId, sapPortId, sapEncapValue } ::= { tmnxSapPfcpTable 1 } TmnxSapPfcpEntry ::= SEQUENCE { tmnxSapPfcpLastChanged TimeStamp, tmnxSapPfcpAssociation TNamedItemOrEmpty, tmnxSapPfcpL2AccessIdAlias DisplayString } tmnxSapPfcpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapPfcpLastChanged indicates the sysUpTime at the time of the most recent change to this table row." ::= { tmnxSapPfcpEntry 1 } tmnxSapPfcpAssociation OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxSapPfcpAssociation specifies the PFCP association for this SAP. A non-empty value must correspond to a conceptual row in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxPfcpAssocTable." DEFVAL { "" } ::= { tmnxSapPfcpEntry 3 } tmnxSapPfcpL2AccessIdAlias OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxSapPfcpL2AccessIdAlias specifies the string to use as Layer-2-Access-Id for this SAP." DEFVAL { "" } ::= { tmnxSapPfcpEntry 4 } tmnxSapOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxSapOperStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxSapOperStatusTable contains operational state information of a SAP." ::= { tmnxSapObjs 179 } tmnxSapOperStatusEntry OBJECT-TYPE SYNTAX TmnxSapOperStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to operational state a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { tmnxSapOperStatusTable 1 } TmnxSapOperStatusEntry ::= SEQUENCE { tmnxSapOperStatus INTEGER, tmnxSapOperFlags BITS } tmnxSapOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), ingressQosMismatch (3), egressQosMismatch (4), portMtuTooSmall (5), svcAdminDown (6), iesIfAdminDown (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxSapOperStatus indicates the operating state of this SAP." ::= { tmnxSapOperStatusEntry 1 } tmnxSapOperFlags OBJECT-TYPE SYNTAX BITS { sapAdminDown (0), svcAdminDown (1), iesIfAdminDown (2), portOperDown (3), portMtuTooSmall (4), l2OperDown (5), ingressQosMismatch (6), egressQosMismatch (7), relearnLimitExceeded (8), recProtSrcMac (9), subIfAdminDown (10), sapIpipeNoCeIpAddr (11), reserved12 (12), reserved13 (13), sapParamMismatch (14), sapCemNoEcidOrMacAddr (15), sapStandbyForMcRing (16), sapSvcMtuTooSmall (17), ingressNamedPoolMismatch (18), egressNamedPoolMismatch (19), ipMirrorNoMacAddr (20), sapEpipeNoRingNode (21), mcStandby (22), mhStandby (23), oamDownMepFault (24), oamUpMepFault (25), ethTunTagMisconfig (26), ingressPolicerMismatch (27), egressPolicerMismatch (28), sapTlsNoRingNode (29), ethRingPathBlocked (30), oamTunnelMepFault (31), operGrpDown (32), portBouncing (33), sapEgressHQosMgmtMismatch (34), evpnP2mpConflict (35), l2tpv3TunnelDown (36), labelStackLimitExceeded (37), sapIngQGrpRedirMismatch (38), sapEgrQGrpRedirMismatch (39) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates all the conditions that affect the operating status of this SAP. The bit values are: sapAdminDown (0) - SAP is admin down. svcAdminDown (1) - Service is admin down. iesIfAdminDown (2) - IP interface is admin down (IES and VPRN only). portOperDown (3) - Access port is oper down. portMtuTooSmall (4) - Access port's MTU is < Service MTU l2OperDown (5) - L2 PVC/PVP is oper down (FR and ATM only). ingressQosMismatch (6) - Mismatch between ingress QoS and Scheduler policies. egressQosMismatch (7) - Mismatch between egress QoS and Scheduler policies. relearnLimitExceeded (8) - MAC relearn limit was exceeded (TLS only). recProtSrcMac (9) - Received a packet with a protected source MAC (TLS only). subIfAdminDown (10) - Subscriber interface is admin down (group-interface SAP only). sapIpipeNoCeIpAddr (11) - CE IP Address not configured for Ipipe SAP (IPIPE SAP only). reserved12 (12) reserved13 (13) sapParamMismatch (14) - Service specific local parameter mismatch. sapCemNoEcidOrMacAddr (15) - ECID or MAC address not configured (CEM SAP only). sapStandbyForMcRing (16) - mc-ring keeps this SAP standby for the corresponding SAP on peer. sapSvcMtuTooSmall (17) - Service MTU is < SAP payload. ingressNamedPoolMismatch (18) - Invalid named pool on the ingress side. egressNamedPoolMismatch (19) - Invalid named pool on the egress side. ipMirrorNoMacAddr (20) - No MAC Address configured for the IP mirror. sapEpipeNoRingNode (21) - No TIMETRA-MC-REDUNDANCY-MIB ::tmnxMcEpipeSapEntry object configured for Epipe SAP (EPIPE SAP only). mcStandby (22) - indicates the SAP is standby because of a multi-chassis protocol. mhStandby (23) - indicates the SAP is standby because of a BGP multi-home protocol. oamDownMepFault (24) - ETH-CFM down MEP fault detected. oamUpMepFault (25) - ETH-CFM up MEP fault detected. ethTunTagMisconfig (26) - Missing Eth-tunnel SAP tag(s). ingressPolicerMismatch (27) - indicate ingress policer is parented to non-existent arbiter egressPolicerMismatch (28) - indicate egress policer is parented to non-existent arbiter. sapTlsNoRingNode (29) - No TIMETRA-MC-REDUNDANCY-MIB ::tmnxMcTlsSapEntry object configured for TLS SAP (VPLS SAP only). ethRingPathBlocked (30) - indicates eth-ring path is blocked. oamTunnelMepFault (31) - ETH-CFM Tunnel MEP fault detected. operGrpDown (32) - indicates operational-group is down. portBouncing (33) - indicates port is oper down and bouncing. sapEgressHQosMgmtMismatch (34) - indicates the policer is in orphaned operational state as scheduler policy does not exist. evpnP2mpConflict (35) - Conflict with evpn p2mp. l2tpv3TunnelDown (36) - indicates l2tpv3 tunnel status. labelStackLimitExceeded (37) - label stack overhead exceeding the egress IOM limitation. sapIngQGrpRedirMismatch (38) - indicates an instance in the SAP's ingress QGrp redirect list is not present on the FP. sapEgrQGrpRedirMismatch (39) - indicates an instance in the SAP's egress QGrp redirect list is not present on the port." ::= { tmnxSapOperStatusEntry 2 } tmnxMgSapNotifyObjs OBJECT IDENTIFIER ::= { tmnxSapObjs 181 } tmnxIpTnlIPsecStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxIpTnlIPsecStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to store IPsec statistics for Ip Tunnel" ::= { tmnxSapObjs 182 } tmnxIpTnlIPsecStatsEntry OBJECT-TYPE SYNTAX TmnxIpTnlIPsecStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPsec Statistics for a single Ip Tunnel." INDEX { svcId, sapPortId, sapEncapValue, tmnxIpTunnelName } ::= { tmnxIpTnlIPsecStatsTable 1 } TmnxIpTnlIPsecStatsEntry ::= SEQUENCE { tmnxIpTnlIPsecIsakmpState INTEGER, tmnxIpTnlIPsecIsakmpEstabTime TimeStamp, tmnxIpTnlIPsecIsakmpNegLifeTime Unsigned32, tmnxIpTnlIPsecNumDpdTx Counter32, tmnxIpTnlIPsecNumDpdRx Counter32, tmnxIpTnlIPsecNumDpdAckTx Counter32, tmnxIpTnlIPsecNumDpdAckRx Counter32, tmnxIpTnlIPsecNumExpRx Counter32, tmnxIpTnlIPsecNumInvalidDpdRx Counter32, tmnxIpTnlIPsecNumCtrlPktsTx Counter32, tmnxIpTnlIPsecNumCtrlPktsRx Counter32, tmnxIpTnlIPsecNumCtrlTxErrors Counter32, tmnxIpTnlIPsecNumCtrlRxErrors Counter32, tmnxIpTnlIPsecMatCertEntryId Integer32, tmnxIpTnlIPsecCertProfName TNamedItemOrEmpty, tmnxIpTnlIPsecIsakmpPathMtu Unsigned32, tmnxIpTnlIPsecStatIsakmpAuthAlg TmnxAuthAlgorithm, tmnxIpTnlIPsecStatIsakmpEncrAlg TmnxEncrAlgorithm, tmnxIpTnlIPsecStatIsakmpPfsDhGp TmnxIkePolicyDHGroupOrZero, tmnxIpTnlIPsecStatIkeTranPrfAlg INTEGER, tmnxIpTnlIPsecMatchTrustAnchor TNamedItemOrEmpty } tmnxIpTnlIPsecIsakmpState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecIsakmpState indicates the state of phase 1 IPsec negotiation." ::= { tmnxIpTnlIPsecStatsEntry 1 } tmnxIpTnlIPsecIsakmpEstabTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecIsakmpEstabTime indicates the sysUpTime at the time the IPsec phase 1 negotiation completed." ::= { tmnxIpTnlIPsecStatsEntry 2 } tmnxIpTnlIPsecIsakmpNegLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecIsakmpNegLifeTime indicates the lifetime negotiated for phase1 IKE key." ::= { tmnxIpTnlIPsecStatsEntry 3 } tmnxIpTnlIPsecNumDpdTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumDpdTx indicates the number of Dead-Peer-Detection packets transmitted." ::= { tmnxIpTnlIPsecStatsEntry 4 } tmnxIpTnlIPsecNumDpdRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumDpdRx indicates the number of Dead-Peer-Detection packets received." ::= { tmnxIpTnlIPsecStatsEntry 5 } tmnxIpTnlIPsecNumDpdAckTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumDpdAckTx indicates the number of Dead-Peer-Detection acknowledgement packets transmitted." ::= { tmnxIpTnlIPsecStatsEntry 6 } tmnxIpTnlIPsecNumDpdAckRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumDpdAckRx indicates the number of Dead-Peer-Detection acknowledgement packets received." ::= { tmnxIpTnlIPsecStatsEntry 7 } tmnxIpTnlIPsecNumExpRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumExpRx indicates the number of DPD R-U-THERE packets that have not been acknowledged." ::= { tmnxIpTnlIPsecStatsEntry 8 } tmnxIpTnlIPsecNumInvalidDpdRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumInvalidDpdRx indicates the number of malformed DPD R-U-THERE acknowledgement packets received." ::= { tmnxIpTnlIPsecStatsEntry 9 } tmnxIpTnlIPsecNumCtrlPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumCtrlPktsTx indicates the number of control packets this IPsec Tunnel has sent." ::= { tmnxIpTnlIPsecStatsEntry 10 } tmnxIpTnlIPsecNumCtrlPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumCtrlPktsRx indicates the number of control packets this IPsec Tunnel has received." ::= { tmnxIpTnlIPsecStatsEntry 11 } tmnxIpTnlIPsecNumCtrlTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumCtrlTxErrors indicates the number of control packet transmit errors." ::= { tmnxIpTnlIPsecStatsEntry 12 } tmnxIpTnlIPsecNumCtrlRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecNumCtrlRxErrors indicates the number of control packet receive errors." ::= { tmnxIpTnlIPsecStatsEntry 13 } tmnxIpTnlIPsecMatCertEntryId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecMatCertEntryId indicates the matching certificate profile entry id used for this tunnel." ::= { tmnxIpTnlIPsecStatsEntry 14 } tmnxIpTnlIPsecCertProfName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecCertProfName indicates a specific certificate profile name used for this tunnel." ::= { tmnxIpTnlIPsecStatsEntry 15 } tmnxIpTnlIPsecIsakmpPathMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecIsakmpPathMtu indicates the path MTU used between the local and remote endpoints for this IPsec SA." ::= { tmnxIpTnlIPsecStatsEntry 16 } tmnxIpTnlIPsecStatIsakmpAuthAlg OBJECT-TYPE SYNTAX TmnxAuthAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecStatIsakmpAuthAlg indicates the authentication algorithm of the IPsec phase 1 negotiation for this IPsec tunnel." ::= { tmnxIpTnlIPsecStatsEntry 17 } tmnxIpTnlIPsecStatIsakmpEncrAlg OBJECT-TYPE SYNTAX TmnxEncrAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecStatIsakmpEncrAlg indicates the encryption algorithm of the IPsec phase 1 negotiation for this IPsec tunnel." ::= { tmnxIpTnlIPsecStatsEntry 18 } tmnxIpTnlIPsecStatIsakmpPfsDhGp OBJECT-TYPE SYNTAX TmnxIkePolicyDHGroupOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecStatIsakmpPfsDhGp indicates the Diffie-Hellman (DH) group of the IPsec phase 1 negotiation for this IPsec tunnel. The Diffie-Hellman (DH) group is used by the IPsec tunnel to achieve Perfect Forward Secrecy (PFS)." ::= { tmnxIpTnlIPsecStatsEntry 19 } tmnxIpTnlIPsecStatIkeTranPrfAlg OBJECT-TYPE SYNTAX INTEGER { md5 (2), sha1 (3), sha256 (4), sha384 (5), sha512 (6), aesXcbc (7), sameAsAuth (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecStatIkeTranPrfAlg specifies the pseudo-random function (PRF)." ::= { tmnxIpTnlIPsecStatsEntry 20 } tmnxIpTnlIPsecMatchTrustAnchor OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecMatchTrustAnchor indicates the name for matched Certificate-Authority Profile name associated with this SAP Ip tunnel certificate." ::= { tmnxIpTnlIPsecStatsEntry 21 } tmnxIpTnlIPsecSATable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxIpTnlIPsecSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to store the IPsec SA entries for Ip Tunnel." ::= { tmnxSapObjs 183 } tmnxIpTnlIPsecSAEntry OBJECT-TYPE SYNTAX TmnxIpTnlIPsecSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single IPsec SA entry." INDEX { svcId, sapPortId, sapEncapValue, tmnxIpTunnelName, tmnxIpTnlIPsecSAId, tmnxIpTnlIPsecSADirection, tmnxIpTnlIPsecSAIndex } ::= { tmnxIpTnlIPsecSATable 1 } TmnxIpTnlIPsecSAEntry ::= SEQUENCE { tmnxIpTnlIPsecSAId Unsigned32, tmnxIpTnlIPsecSAIndex Unsigned32, tmnxIpTnlIPsecSADirection TmnxIPsecDirection, tmnxIpTnlIPsecSAType TmnxIPsecKeyingType, tmnxIpTnlIPsecSASpi Unsigned32, tmnxIpTnlIPsecSAAuthAlgorithm TmnxAuthAlgorithm, tmnxIpTnlIPsecSAEncrAlgorithm TmnxEncrAlgorithm, tmnxIpTnlIPsecSAEstablishedTime TimeStamp, tmnxIpTnlIPsecSANegLifeTime Unsigned32 } tmnxIpTnlIPsecSAId OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAId specifies the id of an SA entry and is part of the index for the tmnxIpTnlIPsecSATable." ::= { tmnxIpTnlIPsecSAEntry 1 } tmnxIpTnlIPsecSAIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAIndex specifies an additional index to uniquely identify the SA entry in the tmnxIpTnlIPsecSATable." ::= { tmnxIpTnlIPsecSAEntry 2 } tmnxIpTnlIPsecSADirection OBJECT-TYPE SYNTAX TmnxIPsecDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSADirection specifies the direction on the Ip tunnel to which this SA entry can be applied. The value of tmnxIpTnlIPsecSADirection is also part of the index for the table tmnxIpTnlIPsecSATable" ::= { tmnxIpTnlIPsecSAEntry 3 } tmnxIpTnlIPsecSAType OBJECT-TYPE SYNTAX TmnxIPsecKeyingType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAType indicates whether this SA entry is created manually by the user or dynamically by the IPsec subsystem." ::= { tmnxIpTnlIPsecSAEntry 4 } tmnxIpTnlIPsecSASpi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSASpi specifies the SPI (Security Parameter Index) used to lookup the instruction to verify and decrypt the incoming IPsec packets when the value of tmnxIpTnlIPsecSADirection is 'inbound'. The value of tmnxIpTnlIPsecSASpi specifies the SPI that will be used in the encoding of the outgoing packets when the value of tmnxIpTnlIPsecSADirection is 'outbound'. The remote node can use this SPI to lookup the instruction to verify and decrypt the packet." ::= { tmnxIpTnlIPsecSAEntry 5 } tmnxIpTnlIPsecSAAuthAlgorithm OBJECT-TYPE SYNTAX TmnxAuthAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAAuthAlgorithm indicates the authentication algorithm used with this SA." ::= { tmnxIpTnlIPsecSAEntry 6 } tmnxIpTnlIPsecSAEncrAlgorithm OBJECT-TYPE SYNTAX TmnxEncrAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAEncrAlgorithm indicates the encryption algorithm used with this SA." ::= { tmnxIpTnlIPsecSAEntry 7 } tmnxIpTnlIPsecSAEstablishedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAEstablishedTime indicates the sysUpTime at the time the IPsec phase 2 negotiation completed." ::= { tmnxIpTnlIPsecSAEntry 8 } tmnxIpTnlIPsecSANegLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSANegLifeTime indicates the lifetime negotiated for phase2 IKE key." ::= { tmnxIpTnlIPsecSAEntry 9 } tmnxIpTnlIPsecSAStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxIpTnlIPsecSAStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to retrieve the IPsec SA Statistics entries." ::= { tmnxSapObjs 184 } tmnxIpTnlIPsecSAStatsEntry OBJECT-TYPE SYNTAX TmnxIpTnlIPsecSAStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single IPsec SA Statistics entry." INDEX { svcId, sapPortId, sapEncapValue, tmnxIpTunnelName, tmnxIpTnlIPsecSAId, tmnxIpTnlIPsecSADirection, tmnxIpTnlIPsecSAIndex } ::= { tmnxIpTnlIPsecSAStatsTable 1 } TmnxIpTnlIPsecSAStatsEntry ::= SEQUENCE { tmnxIpTnlIPsecSAStBytesProcessed Counter64, tmnxIpTnlIPsecSAStBytesProcLow32 Counter32, tmnxIpTnlIPsecSAStBytesProcHgh32 Counter32, tmnxIpTnlIPsecSAStPktsProcessed Counter64, tmnxIpTnlIPsecSAStPktsProcLow32 Counter32, tmnxIpTnlIPsecSAStPktsProcHigh32 Counter32, tmnxIpTnlIPsecSAStCryptoErrors Counter32, tmnxIpTnlIPsecSAStReplayErrors Counter32, tmnxIpTnlIPsecSAStSAErrors Counter32, tmnxIpTnlIPsecSAStPolicyErrors Counter32, tmnxIpTnlIPsecSAStEncapOverhead Counter32, tmnxIpTnlIPsecSAStPfsDhGroup TmnxIkePolicyDHGroupOrZero, tmnxIpTnlIPsecSAStESN TruthValue } tmnxIpTnlIPsecSAStBytesProcessed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStBytesProcessed indicates the number of bytes successfully processed for this SA." ::= { tmnxIpTnlIPsecSAStatsEntry 1 } tmnxIpTnlIPsecSAStBytesProcLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStBytesProcLow32 indicates the lower 32 bits of the value of tmnxIpTnlIPsecSAStBytesProcessed." ::= { tmnxIpTnlIPsecSAStatsEntry 2 } tmnxIpTnlIPsecSAStBytesProcHgh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStBytesProcHgh32 indicates the higher 32 bits of the value of tmnxIpTnlIPsecSAStBytesProcessed." ::= { tmnxIpTnlIPsecSAStatsEntry 3 } tmnxIpTnlIPsecSAStPktsProcessed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStPktsProcessed indicates the number of packets successfully processed for this SA." ::= { tmnxIpTnlIPsecSAStatsEntry 4 } tmnxIpTnlIPsecSAStPktsProcLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStPktsProcLow32 indicates the lower 32 bits of the value of tmnxIpTnlIPsecSAStPktsProcessed." ::= { tmnxIpTnlIPsecSAStatsEntry 5 } tmnxIpTnlIPsecSAStPktsProcHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStPktsProcHigh32 indicates the higher 32 bits of the value of tmnxIpTnlIPsecSAStPktsProcessed." ::= { tmnxIpTnlIPsecSAStatsEntry 6 } tmnxIpTnlIPsecSAStCryptoErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStCryptoErrors indicates the number of crypto errors encountered on this SA. When the value of tmnxIpTnlIPsecSADirection is 'inbound (1)', the tmnxIpTnlIPsecSAStCryptoErrors will be set for the following errors: MAC miscompare Pad errors Illegal configure algorithm Illegal authentication algorithm Inner IP checksum errors Payload alignment errors Sequence number errors Protocol errors When the value of tmnxIpTnlIPsecSADirection is 'outbound (2)', the tmnxIpTnlIPsecSAStCryptoErrors will be set for the following errors: Sequence wrap errors Illegal configure algorithm Illegal authentication algorithm Expanded packet too big TTL decrement errors" ::= { tmnxIpTnlIPsecSAStatsEntry 7 } tmnxIpTnlIPsecSAStReplayErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStReplayErrors indicates the number of replay errors encountered on this SA." ::= { tmnxIpTnlIPsecSAStatsEntry 8 } tmnxIpTnlIPsecSAStSAErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStSAErrors indicates the number of SA errors encountered on this SA. The SA errors means ISA tried to use a CHILD SA that is marked for deletion." ::= { tmnxIpTnlIPsecSAStatsEntry 9 } tmnxIpTnlIPsecSAStPolicyErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStPolicyErrors indicates the number of policy errors encountered on this SA. The policy errors include bundled SA, selector check and policy direction error." ::= { tmnxIpTnlIPsecSAStatsEntry 10 } tmnxIpTnlIPsecSAStEncapOverhead OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStEncapOverhead indicates the encapsulation overhead for this outbound SA. This value is only significant when the value of tmnxIpTnlIPsecSADirection is 'outbound'." ::= { tmnxIpTnlIPsecSAStatsEntry 11 } tmnxIpTnlIPsecSAStPfsDhGroup OBJECT-TYPE SYNTAX TmnxIkePolicyDHGroupOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxIpTnlIPsecSAStPfsDhGroup indicates the Diffie-Hellman (DH) group used with this SA. The Diffie-Hellman (DH) group is used by the SA to achieve Perfect Forward Secrecy (PFS)." ::= { tmnxIpTnlIPsecSAStatsEntry 12 } tmnxIpTnlIPsecSAStESN OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The 'true' value of tmnxIpTnlIPsecSAStESN indicates Extended Sequence Number is enabled for the associated SA." ::= { tmnxIpTnlIPsecSAStatsEntry 13 } sapBaseTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapBaseTableLastChanged indicates the sysUpTime at the time of the most recent change to the sapBaseInfoTable." ::= { tmnxSapObjs 185 } sapTlsTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sapTlsTableLastChanged indicates the sysUpTime at the time of the most recent change to the sapTlsInfoTable." ::= { tmnxSapObjs 186 } tmnxSapSubMonOperGrpTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapSubMonOperGrpTableLastCh indicates the sysUpTime at the time of the most recent change to the tmnxSapSubMonOperGrpTable." ::= { tmnxSapObjs 187 } tmnxSapSubMonOperGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxSapSubMonOperGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxSapSubMonOperGrpTable contains objects to configure SAP multi-chassis redundancy monitor Operational-Groups." ::= { tmnxSapObjs 188 } tmnxSapSubMonOperGrpEntry OBJECT-TYPE SYNTAX TmnxSapSubMonOperGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents an Operational-Group associated with a capture SAP. Entries in this table can be created or deleted via SNMP operations in SAPs with a sapSubType value of 'capture'." INDEX { svcId, sapPortId, sapEncapValue, IMPLIED svcOperGrpName } ::= { tmnxSapSubMonOperGrpTable 1 } TmnxSapSubMonOperGrpEntry ::= SEQUENCE { tmnxSapSubMonOperGrpRowStatus RowStatus, tmnxSapSubMonOperGrpLastCh TimeStamp, tmnxSapSubMonOperGrpHlthDrop Unsigned32, tmnxSapSubMonOperGrpActHlthDrop Unsigned32 } tmnxSapSubMonOperGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxSapSubMonOperGrpRowStatus specifies the row status of this row." ::= { tmnxSapSubMonOperGrpEntry 1 } tmnxSapSubMonOperGrpLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapSubMonOperGrpLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxSapSubMonOperGrpEntry 2 } tmnxSapSubMonOperGrpHlthDrop OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxSapSubMonOperGrpHlthDrop specifies the value by which the health is decremented whenever a member of the monitoring operational-group goes down." DEFVAL { 1 } ::= { tmnxSapSubMonOperGrpEntry 3 } tmnxSapSubMonOperGrpActHlthDrop OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxSapSubMonOperGrpActHlthDrop indicates the actual health drop." ::= { tmnxSapSubMonOperGrpEntry 4 } tmnxSapConformance OBJECT IDENTIFIER ::= { tmnxServConformance 3 } tmnxSapCompliances OBJECT IDENTIFIER ::= { tmnxSapConformance 1 } tmnxSap7450V6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems." MODULE MANDATORY-GROUPS { tmnxSapV6v0Group, tmnxSapTlsV6v0Group, tmnxSapBaseV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapIppipeV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapNotificationObjV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group, tmnxSapBsxV6v0Group } ::= { tmnxSapCompliances 100 } tmnxSap7750V6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxSapV6v0Group, tmnxSapTlsV6v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapIppipeV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapNotificationObjV6v0Group, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group, tmnxSapBsxV6v0Group } ::= { tmnxSapCompliances 101 } tmnxSap7710V6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems." MODULE MANDATORY-GROUPS { tmnxSapV6v0Group, tmnxSapTlsV6v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapIppipeV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapNotifyGroup, tmnxSapNotificationObjV6v0Group, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group } ::= { tmnxSapCompliances 102 } tmnxSap7450V6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems." MODULE MANDATORY-GROUPS { tmnxSapV6v0Group, tmnxSapTlsV6v1Group, tmnxSapBaseV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapIppipeV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapNotificationObjV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group, tmnxSapBsxV6v0Group } ::= { tmnxSapCompliances 103 } tmnxSap7750V6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxSapV6v0Group, tmnxSapTlsV6v1Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapIppipeV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapNotificationObjV6v0Group, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group, tmnxSapBsxV6v0Group } ::= { tmnxSapCompliances 104 } tmnxSap7710V6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems." MODULE MANDATORY-GROUPS { tmnxSapV6v0Group, tmnxSapTlsV6v1Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapIppipeV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapMsapV6v1Group, tmnxSapNotifyGroup, tmnxSapNotificationObjV6v0Group, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group } ::= { tmnxSapCompliances 105 } tmnxSap7450V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems." MODULE MANDATORY-GROUPS { tmnxSapV7v0Group, tmnxSapTlsV6v1Group, tmnxSapBaseV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group, tmnxSapBsxV7v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIpipeV7v0Group, tmnxSapPbbGroup, tmnxSapTlsV7v0Group } ::= { tmnxSapCompliances 106 } tmnxSap7750V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxSapV7v0Group, tmnxSapTlsV6v1Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group, tmnxSapBsxV7v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapFrGroup, tmnxSapIpipeV7v0Group, tmnxSapPbbGroup, tmnxSapTlsV7v0Group } ::= { tmnxSapCompliances 107 } tmnxSap7710V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems." MODULE MANDATORY-GROUPS { tmnxSapV7v0Group, tmnxSapTlsV6v1Group, tmnxSapBaseV6v0Group, tmnxSapQosV6v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV6v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV6v0Group, tmnxSapMsapV6v1Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV6v0Group, tmnxSapMrpV6v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapFrGroup, tmnxSapIpipeV7v0Group, tmnxSapPbbGroup, tmnxSapTlsV7v0Group } ::= { tmnxSapCompliances 108 } tmnxSap7450V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems release 8.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapQosV8v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV8v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV8v0Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup } ::= { tmnxSapCompliances 109 } tmnxSap7750V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 8.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapQosV8v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV8v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup } ::= { tmnxSapCompliances 110 } tmnxSap7710V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems release 8.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapQosV8v0Group, tmnxSapStaticHostV6v1Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV8v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapOverrideV8v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group } ::= { tmnxSapCompliances 111 } tmnxSap7450V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems release 9.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapQosV8v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup } ::= { tmnxSapCompliances 112 } tmnxSap7750V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 9.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapQosV8v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapEgrEncapGrpV9v0Group, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup } ::= { tmnxSapCompliances 113 } tmnxSap7710V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems release 9.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapQosV8v0Group, tmnxSapStaticHostV9v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapOverrideV8v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmGroup, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup } ::= { tmnxSapCompliances 114 } tmnxSap7450V10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems release 10.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapV10v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapQosV8v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapGreV10v0Group, tmnxSapSpbGroup, tmnxSapIpTnlGroup, tmnxSapNotificationV10v0Group, tmnxSapStatsV10v0Group, tmnxSapMonitorIPGroup, tmnxIpTnlOperChgGroup } ::= { tmnxSapCompliances 115 } tmnxSap7750V10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 10.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapV10v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapQosV8v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV6v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapEgrEncapGrpV9v0Group, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapGreV10v0Group, tmnxSapSpbGroup, tmnxSapIpTnlGroup, tmnxSapNotificationV10v0Group, tmnxSapStatsV10v0Group, tmnxSapMonitorIPGroup, tmnxIpTnlOperChgGroup } ::= { tmnxSapCompliances 116 } tmnxSap7710V10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems release 10.0 ." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapV10v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapQosV8v0Group, tmnxSapStaticHostV9v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapMrpV8v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapOverrideV8v0Group, tmnxSapGreGroup, tmnxSapMvrpV8v0Group, tmnxSapNotificationV8v0Group, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmGroup, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapGreV10v0Group, tmnxSapNotificationV10v0Group, tmnxSapStatsV10v0Group, tmnxSapIpTnlGroup, tmnxIpTnlOperChgGroup } ::= { tmnxSapCompliances 117 } tmnxSap7450V11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems release 11.0." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapMvrpV10v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, tmnxSapQosV11v0Group, tmnxIpTnlOperChgGroup } ::= { tmnxSapCompliances 118 } tmnxSap7750V11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 11.0." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapMvrpV10v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapEgrEncapGrpV9v0Group, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, tmnxSapQosV11v0Group, tmnxIpTnlOperChgGroup } ::= { tmnxSapCompliances 119 } tmnxSap7710V11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems release 11.0." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapOverrideV8v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapMvrpV10v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapLagV11v0Group, tmnxSapV11v0Group, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, tmnxSapQosV11v0Group, tmnxIpTnlOperChgGroup } ::= { tmnxSapCompliances 120 } tmnxSap7450V12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems release 12.0." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapMvrpV10v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapQosV11v0Group, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group } ::= { tmnxSapCompliances 121 } tmnxSap7750V12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 12.0." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapMvrpV10v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapEgrEncapGrpV9v0Group, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapQosV11v0Group, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group } ::= { tmnxSapCompliances 122 } tmnxSap7710V12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems release 12.0." MODULE MANDATORY-GROUPS { tmnxSapV8v0Group, tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapOverrideV8v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapMvrpV10v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapLagV11v0Group, tmnxSapV11v0Group, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxSapQosV11v0Group, tmnxSapQosV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group } ::= { tmnxSapCompliances 123 } tmnxSap7450V13v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7450 ESS series systems release 13.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapQosV11v0Group, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapIpoeV13v0Group, tmnxSapQosSchedV13v0Group, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapV13v0Group, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxEvpnMplsMacMovNotifGroup } ::= { tmnxSapCompliances 124 } tmnxSap7750V13v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 13.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapQosV11v0Group, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapIpoeV13v0Group, tmnxSapQosSchedV13v0Group, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapV13v0Group, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxEvpnMplsMacMovNotifGroup } ::= { tmnxSapCompliances 125 } tmnxSap7710V13v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia 7710 SR series systems release 13.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapPolicyV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapIpV6FilterV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapOverrideV8v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapLagV11v0Group, tmnxSapV11v0Group, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxSapQosV11v0Group, tmnxSapQosV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapV13v0Group, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxEvpnMplsMacMovNotifGroup } ::= { tmnxSapCompliances 126 } tmnxSap7xxxV14v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 14.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapTlsV8v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV8v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapDefHostV14v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapMsapV14v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxSapV14v0Group, tmnxSapVplsV14v0Group, tmnxSapQosStatsGroup, tmnxSapStickyMsapGroup, tmnxSapInfoV14v0Group, tmnxSapQosV14v0Group, tmnxSapIpV6FilterV14v0Group, tmnxEvpnMplsMacMovNotifGroup, sapEthLoopbackV14v0Group, tmnxSapTlsPbbV14v0Group, tmnxSapVprnLoopbackV14v0Group, tmnxSapL2tpv3V14v0Group, tmnxSapBgpEvpnAlmpGroup, sapL3LoopbackNotifGroup, sapV14v0NotifyObjsGroup, tmnxSapEgrQosStatsGroup } ::= { tmnxSapCompliances 128 } tmnxSap7xxxV15v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 15.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapDefHostV14v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapMsapV14v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxSapV14v0Group, tmnxSapVplsV14v0Group, tmnxSapQosStatsGroup, tmnxSapStickyMsapGroup, tmnxSapInfoV14v0Group, tmnxSapIpV6FilterV14v0Group, tmnxEvpnMplsMacMovNotifGroup, sapEthLoopbackV14v0Group, tmnxSapTlsPbbV14v0Group, tmnxSapVprnLoopbackV14v0Group, tmnxSapL2tpv3V14v0Group, tmnxSapBgpEvpnAlmpGroup, sapL3LoopbackNotifGroup, sapV14v0NotifyObjsGroup, tmnxSapEgrQosStatsGroup, tmnxSapCfmLmmPerQosV15v0Group, tmnxSapQosQDropTailGroup, tmnxSapQosV15v0Group, tmnxSapEsmMacV15v0Group, tmnxSapQosRateGroup, tmnxSapQosHsQOvrGroup, tSapQosQGrpIngRedirectListGroup, tSapQosQGrpEgrRedirectListGroup, tmnxDDosDCpuProtPolicyGrp, tSapIpTnlTcpMssAdjustV15v0Grp, tmnxSapTlsV15v0Group, tmnxSapMsapV15v0Group, tmnxSapPlcrV15v0Group, tmnxSapQosHsWrrGrpOvrGroup, sapEvpnMhEthSegV15v0Group, tmnxSapQosQBurstLimitOvrGrp } ::= { tmnxSapCompliances 129 } tmnxSap7xxxV16v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 16.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapDefHostV14v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapMsapV14v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxSapV14v0Group, tmnxSapVplsV14v0Group, tmnxSapQosStatsGroup, tmnxSapStickyMsapGroup, tmnxSapInfoV14v0Group, tmnxSapIpV6FilterV14v0Group, tmnxEvpnMplsMacMovNotifGroup, sapEthLoopbackV14v0Group, tmnxSapTlsPbbV14v0Group, tmnxSapVprnLoopbackV14v0Group, tmnxSapL2tpv3V16v0Group, tmnxSapBgpEvpnAlmpGroup, sapL3LoopbackNotifGroup, sapV14v0NotifyObjsGroup, tmnxSapEgrQosStatsGroup, tmnxSapCfmLmmPerQosV15v0Group, tmnxSapQosQDropTailGroup, tmnxSapQosV15v0Group, tmnxSapEsmMacV15v0Group, tmnxSapQosRateGroup, tmnxSapQosHsQOvrGroup, tSapQosQGrpIngRedirectListGroup, tSapQosQGrpEgrRedirectListGroup, tmnxDDosDCpuProtPolicyGrp, tSapIpTnlTcpMssAdjustV15v0Grp, tmnxSapTlsV15v0Group, tmnxSapMsapV15v0Group, tmnxSapQosHsWrrGrpOvrGroup, sapEvpnMhEthSegV15v0Group, tmnxSapQosQBurstLimitOvrGrp, tmnxSapQosPlcrOvrV15v1Group, sapPppoeRedirectGroup, tmnxSapTemplateQosV16v0Group, tmnxIpTunnelV16v0Group, tmnxSapTmplFilterNameV16v0Group, tmnxSapL2tpv3ExtGroup, tmnxSapIngressQinqV16v0Group, tmnxSapBaseStatsAggregateGroup, sapNotifyObjsPortStateGroup } ::= { tmnxSapCompliances 130 } tmnxSap7xxxV15v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 15.1." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapDefHostV14v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapMsapV14v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxSapV14v0Group, tmnxSapVplsV14v0Group, tmnxSapQosStatsGroup, tmnxSapStickyMsapGroup, tmnxSapInfoV14v0Group, tmnxSapIpV6FilterV14v0Group, tmnxEvpnMplsMacMovNotifGroup, sapEthLoopbackV14v0Group, tmnxSapTlsPbbV14v0Group, tmnxSapVprnLoopbackV14v0Group, tmnxSapL2tpv3V14v0Group, tmnxSapBgpEvpnAlmpGroup, sapL3LoopbackNotifGroup, sapV14v0NotifyObjsGroup, tmnxSapEgrQosStatsGroup, tmnxSapCfmLmmPerQosV15v0Group, tmnxSapQosQDropTailGroup, tmnxSapQosV15v0Group, tmnxSapEsmMacV15v0Group, tmnxSapQosRateGroup, tmnxSapQosHsQOvrGroup, tSapQosQGrpIngRedirectListGroup, tSapQosQGrpEgrRedirectListGroup, tmnxDDosDCpuProtPolicyGrp, tSapIpTnlTcpMssAdjustV15v0Grp, tmnxSapTlsV15v0Group, tmnxSapMsapV15v0Group, tmnxSapQosHsWrrGrpOvrGroup, sapEvpnMhEthSegV15v0Group, tmnxSapQosQBurstLimitOvrGrp, tmnxSapQosPlcrOvrV15v1Group } ::= { tmnxSapCompliances 131 } tmnxSap7xxxV19v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 19.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV6v1Group, tmnxSapHsmdaV9v0Group, tmnxSapHsmdaV10v0Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapDefHostV14v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapMsapV14v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapQueueOvrV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxSapV14v0Group, tmnxSapVplsV14v0Group, tmnxSapQosStatsGroup, tmnxSapStickyMsapGroup, tmnxSapInfoV19v0Group, tmnxSapIpV6FilterV14v0Group, tmnxEvpnMplsMacMovNotifGroup, sapEthLoopbackV14v0Group, tmnxSapTlsPbbV14v0Group, tmnxSapVprnLoopbackV14v0Group, tmnxSapL2tpv3V16v0Group, tmnxSapBgpEvpnAlmpGroup, sapL3LoopbackNotifGroup, sapV14v0NotifyObjsGroup, tmnxSapEgrQosStatsGroup, tmnxSapCfmLmmPerQosV15v0Group, tmnxSapQosQDropTailGroup, tmnxSapQosV15v0Group, tmnxSapEsmMacV15v0Group, tmnxSapQosRateGroup, tmnxSapQosHsQOvrGroup, tSapQosQGrpIngRedirectListGroup, tSapQosQGrpEgrRedirectListGroup, tmnxDDosDCpuProtPolicyGrp, tSapIpTnlTcpMssAdjustV15v0Grp, tmnxSapTlsV15v0Group, tmnxSapMsapV15v0Group, tmnxSapQosHsWrrGrpOvrGroup, sapEvpnMhEthSegV15v0Group, tmnxSapQosQBurstLimitOvrGrp, tmnxSapQosPlcrOvrV15v1Group, sapPppoeRedirectGroup, tmnxSapTemplateQosV16v0Group, tmnxIpTunnelV16v0Group, tmnxSapTmplFilterNameV16v0Group, tmnxSapL2tpv3ExtGroup, tmnxSapIngressQinqV16v0Group, tmnxSapPfcpV19v0Group, tmnxSapBaseStatsAggregateGroup, tmnxSapOperStatusGroup, tmnxSapBWGroup, tmnxSapQtagV19v0Group, tmnxSapVlanQosPlcyV19v0Group, tmnxSapEgrAggRateCIRV19v0Group, tmnxSapIgPlcyPlcerStatV19v0Group, tmnxSapIngressAggRateV19v0Group, tmnxIpTunnelEsaVmV19v0Group, sapNotifyObjsPortStateGroup, tmnxSapQosStatsV19v0Group } ::= { tmnxSapCompliances 132 } tmnxSap7xxxV20v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 20.0." MODULE MANDATORY-GROUPS { sapNotifyV20v0Group, sapTlsMacListV20v0Group, sapTlsBgpVplsEvpnV20v0Group, tmnxSapStickyMsapV20v0Group, tmnxSapEgrQMonQDepthV20v0Group, sapIngTrtcm2AggRateV20v10Group, sapIngressIPCritOvrV20v10Group } ::= { tmnxSapCompliances 133 } tmnxSap7xxxV21v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 21.0." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV6v1Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapDefHostV14v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapMsapV14v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxSapV14v0Group, tmnxSapVplsV14v0Group, tmnxSapQosStatsGroup, tmnxSapStickyMsapGroup, tmnxSapInfoV19v0Group, tmnxSapIpV6FilterV14v0Group, tmnxEvpnMplsMacMovNotifGroup, sapEthLoopbackV14v0Group, tmnxSapTlsPbbV14v0Group, tmnxSapVprnLoopbackV14v0Group, tmnxSapL2tpv3V16v0Group, tmnxSapBgpEvpnAlmpGroup, sapL3LoopbackNotifGroup, sapV14v0NotifyObjsGroup, tmnxSapEgrQosStatsGroup, tmnxSapCfmLmmPerQosV15v0Group, tmnxSapQosQDropTailGroup, tmnxSapQosV15v0Group, tmnxSapEsmMacV15v0Group, tmnxSapQosRateGroup, tmnxSapQosHsQOvrGroup, tSapQosQGrpIngRedirectListGroup, tSapQosQGrpEgrRedirectListGroup, tmnxDDosDCpuProtPolicyGrp, tSapIpTnlTcpMssAdjustV15v0Grp, tmnxSapTlsV15v0Group, tmnxSapMsapV15v0Group, tmnxSapQosHsWrrGrpOvrGroup, sapEvpnMhEthSegV15v0Group, tmnxSapQosQBurstLimitOvrGrp, tmnxSapQosPlcrOvrV15v1Group, sapPppoeRedirectGroup, tmnxSapTemplateQosV16v0Group, tmnxIpTunnelV16v0Group, tmnxSapTmplFilterNameV16v0Group, tmnxSapL2tpv3ExtGroup, tmnxSapIngressQinqV16v0Group, tmnxSapPfcpV19v0Group, tmnxSapBaseStatsAggregateGroup, tmnxSapOperStatusGroup, tmnxSapBWGroup, tmnxSapQtagV19v0Group, tmnxSapVlanQosPlcyV19v0Group, tmnxSapEgrAggRateCIRV19v0Group, tmnxSapIgPlcyPlcerStatV19v0Group, tmnxSapIngressAggRateV19v0Group, tmnxIpTunnelEsaVmV19v0Group, sapNotifyObjsPortStateGroup, tmnxSapQosStatsV19v0Group, sapNotifyV20v0Group, sapTlsMacListV20v0Group, sapTlsBgpVplsEvpnV20v0Group, tmnxSapStickyMsapV20v0Group, tmnxSapEgrQMonQDepthV20v0Group, sapIngTrtcm2AggRateV20v10Group, sapIngressIPCritOvrV20v10Group, tmnxIpTnlTransProfV21v0Group, sapCfmSquelchInCtagGroup, tmnxIPTunnelPMTUV21v0Group, tmnxSapIngQMonQDepthV21v0Group, sapLastChangeV21v0Group, tmnxSapEgressHQosV21v0Group, tmnxSapSubV21v0Group, sapIPFilterPairV22v0Group, tmnxSapQueueOvrV22v0Group } ::= { tmnxSapCompliances 134 } tmnxSapV22v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of services SAPs on Nokia SROS series systems release 22." MODULE MANDATORY-GROUPS { tmnxSapV9v0Group, tmnxSapBaseV6v0Group, tmnxSapAtmV6v0Group, tmnxSapAtmV9v0Group, tmnxSapStaticHostV9v0Group, tmnxSapStaticHostV11v0Group, tmnxSapPortIdV6v0Group, tmnxSapSubMgmtV9v0Group, tmnxSapMstiV6v0Group, tmnxSapL2ptV6v0Group, tmnxSapMsapV11v0Group, tmnxSapMsapV9v0Group, tmnxSapMsapV6v1Group, tmnxSapNotifyGroup, tmnxSapCemNotificationV6v0Group, tmnxTlsMsapPppoeV6v0Group, tmnxSapCemV6v0Group, tmnxSapDhcpV8v0Group, tmnxSapDhcpV11v0Group, tmnxSapMrpV8v0Group, tmnxSapBsxV7v0Group, tmnxSapBsxV9v0Group, tmnxSapBsxV10v0Group, tmnxSapArpHostGroup, tmnxSapIgmpTrkGroup, tmnxSapIgmpTrkV8v0Group, tmnxSapIgmpTrkV11v0Group, tmnxSapFrGroupV8v0, tmnxSapIpipeV8v0Group, tmnxSapRadiusFallbackGroup, tmnxSapPbbGroup, tmnxSapPbbV12v0Group, tmnxSapTlsV7v0Group, tmnxSapFPropBMacV8v0Group, tmnxSapPlcrV9v0Group, tmnxSapEthRingGroup, tmnxSapOverrideV8v0Group, tmnxSapOverrideV9v0Group, tmnxSapGreObsoletedGroup, tmnxSapGreV11v0Group, tmnxSapNotificationV11v0Group, tmnxSapNotifObsoletedGroup, tmnxSapMvrpNotificationV8v0Group, tmnxSapEthCfmMonitorGroup, tmnxSapEthCfmGroup, tmnxSapCflowdGroupV11v0, tmnxSapNotificationV9v0Group, tmnxSapDefHostV9v0Group, tmnxSapDefHostV14v0Group, tmnxSapFilterProfileV9v0Group, tmnxSapIpipeNotificationGroup, tmnxSapSpbGroup, tmnxSapNotificationV10v0Group, tmnxSapIpTnlGroup, tmnxSapV11v0Group, tmnxSapLagV11v0Group, tmnxSapMonitorIPGroup, tmnxSapStatsV10v0Group, tmnxSapFlowSPecV11v0Group, tmnxSapDCpuProtV11v0Group, tmnxSapDcpNotifyObjsV11v0Group, tmnxSapDcpNotifyV11v0Group, tmnxSapEgrPortQGrpV11v0Group, tmnxSapSpbV11v0Group, tmnxSapSchedulerRateV11v0Group, tmnxSapEthLoopbackV11v0Group, tmnxSapEthLpbkNotifyV11v0Group, sapTlsFdbMacStatsGroup, sapTlsEtreeGroup, tmnxSapTlsV12v0Group, tmnxMsapPlcyCpmProtV12v0Group, tmnxSapQosV12v0Group, tmnxSapEthCfmV12v0Group, tmnxIpTunnelV12v0Group, sapLagV12v0Group, tmnxIPTunnelGreKeyV12v0Group, tmnxIpTunnelFragStatV12v0Group, tmnxIpTunnelEncapNotifyGroup, tmnxIpTunnelEncaNotifyObjsGroup, tmnxIpTnlOperChgGroup, tmnxMsapQosV12v0Group, tmnxSapMsapV12v0Group, tmnxSapMsapV14v0Group, tmnxSapStatHost6Group, tmnxSapStatHost6V13v0Group, tmnxSapIpoeV13v0Group, tmnxSapDnGroup, tmnxSapQosSchedV13v0Group, tmnxSapIpipeFaultPropGroup, tmnxSapStaticHostRipV13v0Group, tmnxSapBaseStatsV13v0Group, tmnxSapDiamNasreqGroup, tmnxSapRipNotifyGroup, tmnxSapQosRateV13v0Group, tmnxSapNotificationV13v0Group, tmnxSapDhcpV13v0Group, tmnxSapShcvPolicyGroup, tmnxSapMvrpV13v0Group, tmnxSapEgrEncapGrpV13v0Group, sapBgpEvpnMplsMhGroup, tmnxSapV14v0Group, tmnxSapVplsV14v0Group, tmnxSapQosStatsGroup, tmnxSapStickyMsapGroup, tmnxSapInfoV19v0Group, tmnxSapIpV6FilterV14v0Group, tmnxEvpnMplsMacMovNotifGroup, sapEthLoopbackV14v0Group, tmnxSapTlsPbbV14v0Group, tmnxSapVprnLoopbackV14v0Group, tmnxSapL2tpv3V16v0Group, tmnxSapBgpEvpnAlmpGroup, sapL3LoopbackNotifGroup, sapV14v0NotifyObjsGroup, tmnxSapEgrQosStatsGroup, tmnxSapCfmLmmPerQosV15v0Group, tmnxSapQosQDropTailGroup, tmnxSapQosV15v0Group, tmnxSapEsmMacV15v0Group, tmnxSapQosRateGroup, tmnxSapQosHsQOvrGroup, tSapQosQGrpIngRedirectListGroup, tSapQosQGrpEgrRedirectListGroup, tmnxDDosDCpuProtPolicyGrp, tSapIpTnlTcpMssAdjustV15v0Grp, tmnxSapTlsV15v0Group, tmnxSapMsapV15v0Group, tmnxSapQosHsWrrGrpOvrGroup, sapEvpnMhEthSegV15v0Group, tmnxSapQosQBurstLimitOvrGrp, tmnxSapQosPlcrOvrV15v1Group, sapPppoeRedirectGroup, tmnxSapTemplateQosV16v0Group, tmnxIpTunnelV16v0Group, tmnxSapTmplFilterNameV16v0Group, tmnxSapL2tpv3ExtGroup, tmnxSapIngressQinqV16v0Group, tmnxSapPfcpV19v0Group, tmnxSapBaseStatsAggregateGroup, tmnxSapOperStatusGroup, tmnxSapBWGroup, tmnxSapQtagV19v0Group, tmnxSapVlanQosPlcyV19v0Group, tmnxSapEgrAggRateCIRV19v0Group, tmnxSapIgPlcyPlcerStatV19v0Group, tmnxSapIngressAggRateV19v0Group, tmnxIpTunnelEsaVmV19v0Group, sapNotifyObjsPortStateGroup, tmnxSapQosStatsV19v0Group, sapNotifyV20v0Group, sapTlsMacListV20v0Group, sapTlsBgpVplsEvpnV20v0Group, tmnxSapStickyMsapV20v0Group, tmnxSapEgrQMonQDepthV20v0Group, sapIngTrtcm2AggRateV20v10Group, sapIngressIPCritOvrV20v10Group, tmnxIpTnlTransProfV21v0Group, sapCfmSquelchInCtagGroup, tmnxIPTunnelPMTUV21v0Group, tmnxSapIngQMonQDepthV21v0Group, sapLastChangeV21v0Group, tmnxSapEgressHQosV21v0Group, tmnxSapSubV21v0Group, sapIPFilterPairV22v0Group, tmnxSapQueueOvrV22v0Group, tmnxSapStaticHostV22v0Group } ::= { tmnxSapCompliances 135 } tmnxSapGroups OBJECT IDENTIFIER ::= { tmnxSapConformance 2 } tmnxSapV6v0Group OBJECT-GROUP OBJECTS { sapNumEntries, sapPortId, sapEncapValue, sapRowStatus, sapType, sapDescription, sapAdminStatus, sapOperStatus, sapIngressQosPolicyId, sapIngressMacFilterId, sapIngressIpFilterId, sapIngressVlanTranslationId, sapEgressQosPolicyId, sapEgressMacFilterId, sapEgressIpFilterId, sapMirrorStatus, sapIesIfIndex, sapLastMgmtChange, sapCollectAcctStats, sapAccountingPolicyId, sapVpnId, sapCustId, sapCustMultSvcSite, sapIngressQosSchedulerPolicy, sapEgressQosSchedulerPolicy, sapSplitHorizonGrp, sapIngressSharedQueuePolicy, sapIngressMatchQinQDot1PBits, sapOperFlags, sapLastStatusChange, sapAntiSpoofing, sapTodSuite, sapIngUseMultipointShared, sapEgressQinQMarkTopOnly, sapEgressAggRateLimit, sapEndPoint, sapIngressVlanTranslation, sapSubType, sapCpmProtPolicyId, sapCpmProtMonitorMac, sapEgressFrameBasedAccounting, sapEthernetLLFAdminStatus, sapEthernetLLFOperStatus, sapTlsMvplsRowStatus, sapAntiSpoofIpAddress, sapAntiSpoofMacAddress, sapEgressFrameBasedAccounting } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP general capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 100 } tmnxSapTlsV6v0Group OBJECT-GROUP OBJECTS { sapTlsStpAdminStatus, sapTlsStpPriority, sapTlsStpPortNum, sapTlsStpPathCost, sapTlsStpRapidStart, sapTlsStpBpduEncap, sapTlsStpPortState, sapTlsStpDesignatedBridge, sapTlsStpDesignatedPort, sapTlsStpForwardTransitions, sapTlsStpInConfigBpdus, sapTlsStpInTcnBpdus, sapTlsStpInBadBpdus, sapTlsStpOutConfigBpdus, sapTlsStpOutTcnBpdus, sapTlsStpOperBpduEncap, sapTlsVpnId, sapTlsCustId, sapTlsMacAddressLimit, sapTlsNumMacAddresses, sapTlsNumStaticMacAddresses, sapTlsMacLearning, sapTlsMacAgeing, sapTlsStpOperEdge, sapTlsStpAdminPointToPoint, sapTlsStpPortRole, sapTlsStpAutoEdge, sapTlsStpOperProtocol, sapTlsStpInRstBpdus, sapTlsStpOutRstBpdus, sapTlsLimitMacMove, sapTlsMacPinning, sapTlsDiscardUnknownSource, sapTlsMvplsPruneState, sapTlsMvplsMgmtService, sapTlsMvplsMgmtPortId, sapTlsMvplsMgmtEncapValue, sapTlsArpReplyAgent, sapTlsStpException, sapTlsAuthenticationPolicy, sapTlsL2ptTermination, sapTlsBpduTranslation, sapTlsStpRootGuard, sapTlsStpInsideRegion, sapTlsEgressMcastGroup, sapTlsStpInMstBpdus, sapTlsStpOutMstBpdus, sapTlsRestProtSrcMac, sapTlsRestProtSrcMacAction, sapTlsRestUnprotDstMac, sapTlsStpRxdDesigBridge, sapTlsStpRootGuardViolation, sapTlsShcvAction, sapTlsShcvSrcIp, sapTlsShcvSrcMac, sapTlsShcvInterval, sapTlsMvplsMgmtMsti, sapTlsMacMoveNextUpTime, sapTlsMacMoveRateExcdLeft, sapTlsL2ptForceBoundary, sapTlsLimitMacMoveLevel, sapTlsBpduTransOper, sapTlsDefMsapPolicy, sapTlsL2ptProtocols, sapTlsL2ptForceProtocols, sapTlsDhcpMsapTrigger, sapTlsDhcpProxyLeaseTime, sapTlsDhcpRemoteId, sapTlsMrpJoinTime, sapTlsMrpLeaveTime, sapTlsMrpLeaveAllTime, sapTlsMrpPeriodicTime, sapTlsMrpPeriodicEnabled } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP TLS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 101 } tmnxSapAtmV6v0Group OBJECT-GROUP OBJECTS { sapAtmEncapsulation, sapAtmIngressTrafficDescIndex, sapAtmEgressTrafficDescIndex, sapAtmOamAlarmCellHandling, sapAtmOamTerminate, sapAtmOamPeriodicLoopback, sapAtmLLFAdminStatus, sapAtmLLFOperStatus } STATUS current DESCRIPTION "The group of objects supporting management of SAP ATM capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 102 } tmnxSapBaseV6v0Group OBJECT-GROUP OBJECTS { sapBaseStatsIngressPchipDroppedPackets, sapBaseStatsIngressPchipDroppedOctets, sapBaseStatsIngressPchipOfferedHiPrioPackets, sapBaseStatsIngressPchipOfferedHiPrioOctets, sapBaseStatsIngressPchipOfferedLoPrioPackets, sapBaseStatsIngressPchipOfferedLoPrioOctets, sapBaseStatsIngressQchipDroppedHiPrioPackets, sapBaseStatsIngressQchipDroppedHiPrioOctets, sapBaseStatsIngressQchipDroppedLoPrioPackets, sapBaseStatsIngressQchipDroppedLoPrioOctets, sapBaseStatsIngressQchipForwardedInProfPackets, sapBaseStatsIngressQchipForwardedInProfOctets, sapBaseStatsIngressQchipForwardedOutProfPackets, sapBaseStatsIngressQchipForwardedOutProfOctets, sapBaseStatsEgressQchipDroppedInProfPackets, sapBaseStatsEgressQchipDroppedInProfOctets, sapBaseStatsEgressQchipDroppedOutProfPackets, sapBaseStatsEgressQchipDroppedOutProfOctets, sapBaseStatsEgressQchipForwardedInProfPackets, sapBaseStatsEgressQchipForwardedInProfOctets, sapBaseStatsEgressQchipForwardedOutProfPackets, sapBaseStatsEgressQchipForwardedOutProfOctets, sapBaseStatsCustId, sapBaseStatsIngressPchipOfferedUncoloredPackets, sapBaseStatsIngressPchipOfferedUncoloredOctets, sapBaseStatsAuthenticationPktsDiscarded, sapBaseStatsAuthenticationPktsSuccess, sapBaseStatsLastClearedTime } STATUS current DESCRIPTION "The group of objects supporting management of SAP Base capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 103 } tmnxSapQosV6v0Group OBJECT-GROUP OBJECTS { sapIngQosQueueId, sapIngQosQueueStatsOfferedHiPrioPackets, sapIngQosQueueStatsDroppedHiPrioPackets, sapIngQosQueueStatsOfferedLoPrioPackets, sapIngQosQueueStatsDroppedLoPrioPackets, sapIngQosQueueStatsOfferedHiPrioOctets, sapIngQosQueueStatsDroppedHiPrioOctets, sapIngQosQueueStatsOfferedLoPrioOctets, sapIngQosQueueStatsDroppedLoPrioOctets, sapIngQosQueueStatsForwardedInProfPackets, sapIngQosQueueStatsForwardedOutProfPackets, sapIngQosQueueStatsForwardedInProfOctets, sapIngQosQueueStatsForwardedOutProfOctets, sapIngQosCustId, sapIngQosQueueStatsUncoloredPacketsOffered, sapIngQosQueueStatsUncoloredOctetsOffered, sapEgrQosQueueId, sapEgrQosQueueStatsForwardedInProfPackets, sapEgrQosQueueStatsDroppedInProfPackets, sapEgrQosQueueStatsForwardedOutProfPackets, sapEgrQosQueueStatsDroppedOutProfPackets, sapEgrQosQueueStatsForwardedInProfOctets, sapEgrQosQueueStatsDroppedInProfOctets, sapEgrQosQueueStatsForwardedOutProfOctets, sapEgrQosQueueStatsDroppedOutProfOctets, sapEgrQosCustId, sapIngQosSchedStatsForwardedPackets, sapIngQosSchedStatsForwardedOctets, sapIngQosSchedCustId, sapEgrQosSchedStatsForwardedPackets, sapEgrQosSchedStatsForwardedOctets, sapEgrQosSchedCustId, sapIngQosQRowStatus, sapIngQosQLastMgmtChange, sapIngQosQOverrideFlags, sapIngQosQCBS, sapIngQosQMBS, sapIngQosQHiPrioOnly, sapIngQosQCIRAdaptation, sapIngQosQPIRAdaptation, sapIngQosQAdminPIR, sapIngQosQAdminCIR, sapEgrQosQRowStatus, sapEgrQosQLastMgmtChange, sapEgrQosQOverrideFlags, sapEgrQosQCBS, sapEgrQosQMBS, sapEgrQosQHiPrioOnly, sapEgrQosQCIRAdaptation, sapEgrQosQPIRAdaptation, sapEgrQosQAdminPIR, sapEgrQosQAdminCIR, sapEgrQosQAvgOverhead, sapIngQosSRowStatus, sapIngQosSLastMgmtChange, sapIngQosSOverrideFlags, sapIngQosSPIR, sapIngQosSCIR, sapIngQosSSummedCIR, sapEgrQosSRowStatus, sapEgrQosSLastMgmtChange, sapEgrQosSOverrideFlags, sapEgrQosSPIR, sapEgrQosSCIR, sapEgrQosSSummedCIR } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 104 } tmnxSapStaticHostV6v0Group OBJECT-GROUP OBJECTS { sapStaticHostRowStatus, sapStaticHostSubscrIdent, sapStaticHostSubProfile, sapStaticHostSlaProfile, sapStaticHostShcvOperState, sapStaticHostShcvChecks, sapStaticHostShcvReplies, sapStaticHostShcvReplyTime, sapStaticHostDynMacAddress, sapStaticHostRetailerSvcId, sapStaticHostRetailerIf, sapStaticHostFwdingState, sapStaticHostAncpString, sapStaticHostSubIdIsSapId, sapStaticHostIntermediateDestId } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP static host capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 105 } tmnxSapDhcpV6v0Group OBJECT-GROUP OBJECTS { sapTlsDhcpAdminState, sapTlsDhcpDescription, sapTlsDhcpSnoop, sapTlsDhcpLeasePopulate, sapTlsDhcpOperLeasePopulate, sapTlsDhcpInfoAction, sapTlsDhcpCircuitId, sapTlsDhcpRemoteIdString, sapTlsDhcpProxyAdminState, sapTlsDhcpProxyServerAddr, sapTlsDhcpProxyLTRadiusOverride, sapTlsDhcpVendorIncludeOptions, sapTlsDhcpVendorOptionString, sapTlsDhcpStatsClntSnoopdPckts, sapTlsDhcpStatsSrvrSnoopdPckts, sapTlsDhcpStatsClntForwdPckts, sapTlsDhcpStatsSrvrForwdPckts, sapTlsDhcpStatsClntDropdPckts, sapTlsDhcpStatsSrvrDropdPckts, sapTlsDhcpStatsClntProxRadPckts, sapTlsDhcpStatsClntProxLSPckts, sapTlsDhcpStatsGenReleasePckts, sapTlsDhcpStatsGenForceRenPckts, sapDhcpOperLeasePopulate } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP TLS DHCP capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 106 } tmnxSapPortIdV6v0Group OBJECT-GROUP OBJECTS { sapPortIdIngQosSchedFwdPkts, sapPortIdIngQosSchedFwdOctets, sapPortIdIngQosSchedCustId, sapPortIdEgrQosSchedFwdPkts, sapPortIdEgrQosSchedFwdOctets, sapPortIdEgrQosSchedCustId } STATUS current DESCRIPTION "The group of objects supporting management of SAP Port ID capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 107 } tmnxSapSubMgmtV6v0Group OBJECT-GROUP OBJECTS { sapSubMgmtAdminStatus, sapSubMgmtDefSubProfile, sapSubMgmtDefSlaProfile, sapSubMgmtSubIdentPolicy, sapSubMgmtSubscriberLimit, sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubIdent, sapSubMgmtNonSubTrafficSubProf, sapSubMgmtNonSubTrafficSlaProf, sapSubMgmtMacDaHashing, sapSubMgmtDefSubIdent, sapSubMgmtDefSubIdentString } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Sub-management capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 108 } tmnxSapMstiV6v0Group OBJECT-GROUP OBJECTS { sapTlsMstiPriority, sapTlsMstiPathCost, sapTlsMstiLastMgmtChange, sapTlsMstiPortRole, sapTlsMstiPortState, sapTlsMstiDesignatedBridge, sapTlsMstiDesignatedPort } STATUS current DESCRIPTION "The group of objects supporting management of SAP TLS MSTI capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 109 } tmnxSapIppipeV6v0Group OBJECT-GROUP OBJECTS { sapIpipeCeInetAddress, sapIpipeCeInetAddressType, sapIpipeMacRefreshInterval, sapIpipeMacAddress, sapIpipeArpedMacAddress, sapIpipeArpedMacAddressTimeout } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ipipe capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 110 } tmnxSapPolicyV6v0Group OBJECT-GROUP OBJECTS { sapCurrentIngressIpFilterId, sapCurrentIngressMacFilterId, sapCurrentIngressQosPolicyId, sapCurrentIngressQosSchedPlcy, sapCurrentEgressIpFilterId, sapCurrentEgressMacFilterId, sapCurrentEgressQosPolicyId, sapCurrentEgressQosSchedPlcy, sapIntendedIngressIpFilterId, sapIntendedIngressMacFilterId, sapIntendedIngressQosPolicyId, sapIntendedIngressQosSchedPlcy, sapIntendedEgressIpFilterId, sapIntendedEgressMacFilterId, sapIntendedEgressQosPolicyId, sapIntendedEgressQosSchedPlcy, sapIgQosPlcyDroppedHiPrioPackets, sapIgQosPlcyDroppedHiPrioOctets, sapIgQosPlcyDroppedLoPrioPackets, sapIgQosPlcyDroppedLoPrioOctets, sapIgQosPlcyForwardedInProfPackets, sapIgQosPlcyForwardedInProfOctets, sapIgQosPlcyForwardedOutProfPackets, sapIgQosPlcyForwardedOutProfOctets, sapEgQosPlcyDroppedInProfPackets, sapEgQosPlcyDroppedInProfOctets, sapEgQosPlcyDroppedOutProfPackets, sapEgQosPlcyDroppedOutProfOctets, sapEgQosPlcyForwardedInProfPackets, sapEgQosPlcyForwardedInProfOctets, sapEgQosPlcyForwardedOutProfPackets, sapEgQosPlcyForwardedOutProfOctets, sapIgQosPlcyQueueStatsOfferedHiPrioPackets, sapIgQosPlcyQueueStatsDroppedHiPrioPackets, sapIgQosPlcyQueueStatsOfferedLoPrioPackets, sapIgQosPlcyQueueStatsDroppedLoPrioPackets, sapIgQosPlcyQueueStatsOfferedHiPrioOctets, sapIgQosPlcyQueueStatsDroppedHiPrioOctets, sapIgQosPlcyQueueStatsOfferedLoPrioOctets, sapIgQosPlcyQueueStatsDroppedLoPrioOctets, sapIgQosPlcyQueueStatsForwardedInProfPackets, sapIgQosPlcyQueueStatsForwardedOutProfPackets, sapIgQosPlcyQueueStatsForwardedInProfOctets, sapIgQosPlcyQueueStatsForwardedOutProfOctets, sapIgQosPlcyQueueCustId, sapIgQosPlcyQueueStatsUncoloredPacketsOffered, sapIgQosPlcyQueueStatsUncoloredOctetsOffered, sapEgQosPlcyQueueStatsForwardedInProfPackets, sapEgQosPlcyQueueStatsDroppedInProfPackets, sapEgQosPlcyQueueStatsForwardedOutProfPackets, sapEgQosPlcyQueueStatsDroppedOutProfPackets, sapEgQosPlcyQueueStatsForwardedInProfOctets, sapEgQosPlcyQueueStatsDroppedInProfOctets, sapEgQosPlcyQueueStatsForwardedOutProfOctets, sapEgQosPlcyQueueStatsDroppedOutProfOctets, sapEgQosPlcyQueueCustId, sapIngSchedPlcyStatsFwdPkt, sapIngSchedPlcyStatsFwdOct, sapEgrSchedPlcyStatsFwdPkt, sapEgrSchedPlcyStatsFwdOct, sapIngSchedPlcyPortStatsFwdPkt, sapIngSchedPlcyPortStatsFwdOct, sapEgrSchedPlcyPortStatsFwdPkt, sapEgrSchedPlcyPortStatsFwdOct } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP ingress/egress capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 111 } tmnxSapCemV6v0Group OBJECT-GROUP OBJECTS { sapCemLastMgmtChange, sapCemEndpointType, sapCemBitrate, sapCemCasTrunkFraming, sapCemPayloadSize, sapCemJitterBuffer, sapCemUseRtpHeader, sapCemDifferential, sapCemTimestampFreq, sapCemReportAlarm, sapCemReportAlarmStatus, sapCemLocalEcid, sapCemRemoteMacAddr, sapCemRemoteEcid, sapCemJitterBufPackets, sapCemPlayoutBufPacketsThreshold, sapCemStatsIngressForwardedPkts, sapCemStatsIngressDroppedPkts, sapCemStatsEgressForwardedPkts, sapCemStatsEgressDroppedPkts, sapCemStatsEgressMissingPkts, sapCemStatsEgressPktsReOrder, sapCemStatsEgressJtrBfrUnderruns, sapCemStatsEgressJtrBfrOverruns, sapCemStatsEgressMisOrderDropped, sapCemStatsEgressMalformedPkts, sapCemStatsEgressLBitDropped, sapCemStatsEgressMultipleDropped, sapCemStatsEgressESs, sapCemStatsEgressSESs, sapCemStatsEgressUASs, sapCemStatsEgressFailureCounts, sapCemStatsEgressUnderrunCounts, sapCemStatsEgressOverrunCounts, sapCemStatsEgressJtrBfrDepth } STATUS current DESCRIPTION "The group of objects supporting management of SAP Cem capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 112 } tmnxSapL2ptV6v0Group OBJECT-GROUP OBJECTS { sapTlsL2ptStatsLastClearedTime, sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx, sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx, sapTlsL2ptStatsL2ptEncapStpRstBpdusRx, sapTlsL2ptStatsL2ptEncapStpRstBpdusTx, sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx, sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx, sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx, sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx, sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx, sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx, sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx, sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx, sapTlsL2ptStatsStpConfigBpdusRx, sapTlsL2ptStatsStpConfigBpdusTx, sapTlsL2ptStatsStpRstBpdusRx, sapTlsL2ptStatsStpRstBpdusTx, sapTlsL2ptStatsStpTcnBpdusRx, sapTlsL2ptStatsStpTcnBpdusTx, sapTlsL2ptStatsPvstConfigBpdusRx, sapTlsL2ptStatsPvstConfigBpdusTx, sapTlsL2ptStatsPvstRstBpdusRx, sapTlsL2ptStatsPvstRstBpdusTx, sapTlsL2ptStatsPvstTcnBpdusRx, sapTlsL2ptStatsPvstTcnBpdusTx, sapTlsL2ptStatsOtherBpdusRx, sapTlsL2ptStatsOtherBpdusTx, sapTlsL2ptStatsOtherL2ptBpdusRx, sapTlsL2ptStatsOtherL2ptBpdusTx, sapTlsL2ptStatsOtherInvalidBpdusRx, sapTlsL2ptStatsOtherInvalidBpdusTx, sapTlsL2ptStatsL2ptEncapCdpBpdusRx, sapTlsL2ptStatsL2ptEncapCdpBpdusTx, sapTlsL2ptStatsL2ptEncapVtpBpdusRx, sapTlsL2ptStatsL2ptEncapVtpBpdusTx, sapTlsL2ptStatsL2ptEncapDtpBpdusRx, sapTlsL2ptStatsL2ptEncapDtpBpdusTx, sapTlsL2ptStatsL2ptEncapPagpBpdusRx, sapTlsL2ptStatsL2ptEncapPagpBpdusTx, sapTlsL2ptStatsL2ptEncapUdldBpdusRx, sapTlsL2ptStatsL2ptEncapUdldBpdusTx, sapTlsL2ptStatsCdpBpdusRx, sapTlsL2ptStatsCdpBpdusTx, sapTlsL2ptStatsVtpBpdusRx, sapTlsL2ptStatsVtpBpdusTx, sapTlsL2ptStatsDtpBpdusRx, sapTlsL2ptStatsDtpBpdusTx, sapTlsL2ptStatsPagpBpdusRx, sapTlsL2ptStatsPagpBpdusTx, sapTlsL2ptStatsUdldBpdusRx, sapTlsL2ptStatsUdldBpdusTx } STATUS current DESCRIPTION "The group of objects supporting management of SAP TLS L2pt capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 113 } tmnxSapMsapV6v0Group OBJECT-GROUP OBJECTS { msapPlcyRowStatus, msapPlcyLastChanged, msapPlcyDescription, msapPlcyCpmProtPolicyId, msapPlcyCpmProtMonitorMac, msapPlcySubMgmtDefSubId, msapPlcySubMgmtDefSubIdStr, msapPlcySubMgmtDefSubProfile, msapPlcySubMgmtDefSlaProfile, msapPlcySubMgmtSubIdPlcy, msapPlcySubMgmtSubscriberLimit, msapPlcySubMgmtProfiledTrafOnly, msapPlcySubMgmtNonSubTrafSubId, msapPlcySubMgmtNonSubTrafSubProf, msapPlcySubMgmtNonSubTrafSlaProf, msapPlcyAssociatedMsaps, msapTlsPlcyLastChanged, msapTlsPlcySplitHorizonGrp, msapTlsPlcyArpReplyAgent, msapTlsPlcySubMgmtMacDaHashing, msapTlsPlcyDhcpLeasePopulate, msapTlsPlcyDhcpPrxyAdminState, msapTlsPlcyDhcpPrxyServAddr, msapTlsPlcyDhcpPrxyServAddrType, msapTlsPlcyDhcpPrxyLTRadOverride, msapTlsPlcyDhcpInfoAction, msapTlsPlcyDhcpCircuitId, msapTlsPlcyDhcpRemoteId, msapTlsPlcyDhcpRemoteIdString, msapTlsPlcyDhcpVendorInclOpts, msapTlsPlcyDhcpVendorOptStr, msapTlsPlcyDhcpPrxyLeaseTime, msapTlsPlcyEgressMcastGroup, msapTlsPlcyIgmpSnpgImportPlcy, msapTlsPlcyIgmpSnpgFastLeave, msapTlsPlcyIgmpSnpgSendQueries, msapTlsPlcyIgmpSnpgGenQueryIntv, msapTlsPlcyIgmpSnpgQueryRespIntv, msapTlsPlcyIgmpSnpgRobustCount, msapTlsPlcyIgmpSnpgLastMembIntvl, msapTlsPlcyIgmpSnpgMaxNbrGrps, msapTlsPlcyIgmpSnpgMvrFromVplsId, msapTlsPlcyIgmpSnpgVersion, msapTlsPlcyIgmpSnpgMcacPlcyName, msapTlsPlcyIgmpSnpgMcacPrRsvMnBW, msapTlsPlcyIgmpSnpgMcacUncnstBW, msapIgmpSnpgMcacLevelRowStatus, msapIgmpSnpgMcacLevelLastChanged, msapIgmpSnpgMcacLevelBW, msapIgmpSnpgMcacLagRowStatus, msapIgmpSnpgMcacLagLastChanged, msapIgmpSnpgMcacLagLevel, msapInfoCreationSapPortEncapVal, msapInfoCreationPlcyName, msapInfoReEvalPolicy, msapInfoLastChanged, msapCaptureSapStatsPktsRecvd, msapCaptureSapStatsPktsRedirect, msapCaptureSapStatsPktsDropped, msapPlcyTblLastChgd, msapTlsPlcyTblLastChgd, msapIgmpSnpgMcacLvlTblLastChgd, msapIgmpSnpgMcacLagTblLastChgd, msapInfoTblLastChgd } STATUS obsolete DESCRIPTION "The group of objects supporting management of managed SAP capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 114 } tmnxSapMrpV6v0Group OBJECT-GROUP OBJECTS { sapTlsMrpRxPdus, sapTlsMrpDroppedPdus, sapTlsMrpTxPdus, sapTlsMrpRxNewEvent, sapTlsMrpRxJoinInEvent, sapTlsMrpRxInEvent, sapTlsMrpRxJoinEmptyEvent, sapTlsMrpRxEmptyEvent, sapTlsMrpRxLeaveEvent, sapTlsMrpTxNewEvent, sapTlsMrpTxJoinInEvent, sapTlsMrpTxInEvent, sapTlsMrpTxJoinEmptyEvent, sapTlsMrpTxEmptyEvent, sapTlsMrpTxLeaveEvent, sapTlsMmrpDeclared, sapTlsMmrpRegistered } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP MRP capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 115 } tmnxSapHsmdaV6v0Group OBJECT-GROUP OBJECTS { sapIngressAggRateLimit, sapEgressHsmdaShaperOverride, sapIngressHsmdaPacketOffOvr, sapEgressHsmdaPacketOffOverride, sapIngQosHsmdaQueueRowStatus, sapIngQosHsmdaQueueLastChanged, sapIngQosHsmdaQueueAdminPIR, sapIngQosHsmdaQueueAdminCIR, sapIngQosHsmdaQueueSlopePolicy, sapEgrQosHsmdaQueueRowStatus, sapEgrQosHsmdaQueueLastChanged, sapEgrQosHsmdaQueueAdminPIR, sapEgrQosHsmdaQueueAdminCIR, sapEgrQosHsmdaQueueSlopePolicy, sapIngHsmdaQStatCustId, sapIngHsmdaQStatHiPktsDropped, sapIngHsmdaQStatLoPktsDropped, sapIngHsmdaQStatHiOctsDropped, sapIngHsmdaQStatLoOctsDropped, sapIngHsmdaQStatInProfPktsFwd, sapIngHsmdaQStatOutProfPktsFwd, sapIngHsmdaQStatInProfOctsFwd, sapIngHsmdaQStatOutProfOctsFwd, sapIngHsmdaQStatAllPktsOffered, sapIngHsmdaQStatAllOctsOffered, sapIngHsmdaCntrStCustId, sapIngHsmdaCntrStHiPktDrop, sapIngHsmdaCntrStLoPktDrop, sapIngHsmdaCntrStHiOctDrop, sapIngHsmdaCntrStLoOctDrop, sapIngHsmdaCntrStInProfPktFwd, sapIngHsmdaCntrStOutProfPktFwd, sapIngHsmdaCntrStInProfOctFwd, sapIngHsmdaCntrStOutProfOctFwd, sapIngHsmdaCntrStAllPktOffered, sapIngHsmdaCntrStAllOctOffered, sapEgrHsmdaQStatCustId, sapEgrHsmdaQStatInProfPktFwd, sapEgrHsmdaQStatInProfPktDropd, sapEgrHsmdaQStatOutProfPktFwd, sapEgrHsmdaQStatOutProfPktDropd, sapEgrHsmdaQStatInProfOctFwd, sapEgrHsmdaQStatInProfOctDropd, sapEgrHsmdaQStatOutProfOctFwd, sapEgrHsmdaQStatOutProfOctDropd, sapEgrHsmdaCntrStCustId, sapEgrHsmdaCntrStInProfPktFwd, sapEgrHsmdaCntrStInProfPktDrop, sapEgrHsmdaCntrStOutProfPktFwd, sapEgrHsmdaCntrStOutProfPktDrop, sapEgrHsmdaCntrStInProfOctFwd, sapEgrHsmdaCntrStInProfOctDrop, sapEgrHsmdaCntrStOutProfOctFwd, sapEgrHsmdaCntrStOutProfOctDrop } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS Hsmda capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 116 } tmnxTlsMsapPppoeV6v0Group OBJECT-GROUP OBJECTS { sapTlsPppoeMsapTrigger } STATUS current DESCRIPTION "The group of objects supporting PPPOE on Managed SAPs feature on the Nokia SROS series systems." ::= { tmnxSapGroups 117 } tmnxSapIpV6FilterV6v0Group OBJECT-GROUP OBJECTS { sapIngressIpv6FilterId, sapEgressIpv6FilterId, sapCurrentIngressIpv6FilterId, sapCurrentEgressIpv6FilterId, sapIntendedIngressIpv6FilterId, sapIntendedEgressIpv6FilterId } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ingress Policy capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 118 } tmnxSapBsxV6v0Group OBJECT-GROUP OBJECTS { sapStaticHostAppProfile, sapSubMgmtDefAppProfile, sapSubMgmtNonSubTrafficAppProf, msapPlcySubMgmtDefAppProfile, msapPlcySubMgmtNonSubTrafAppProf } STATUS obsolete DESCRIPTION "The group of objects supporting management of BSX (Application Assurance) capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 119 } tmnxSapMsapV6v1Group OBJECT-GROUP OBJECTS { msapL3PlcyTblLastChgd, msapL3PlcyLastChanged, msapL3PlcyAntiSpoof } STATUS current DESCRIPTION "The group of objects supporting management of managed SAP L3 capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 120 } tmnxSapStaticHostV6v1Group OBJECT-GROUP OBJECTS { sapStaticHostRowStatus, sapStaticHostSubscrIdent, sapStaticHostSubProfile, sapStaticHostSlaProfile, sapStaticHostShcvOperState, sapStaticHostShcvChecks, sapStaticHostShcvReplies, sapStaticHostShcvReplyTime, sapStaticHostDynMacAddress, sapStaticHostRetailerSvcId, sapStaticHostRetailerIf, sapStaticHostFwdingState, sapStaticHostAncpString, sapStaticHostSubIdIsSapId, sapStaticHostIntermediateDestId, sapStaticHostAdminStatus, sapStaticHostMRtTblLastChgd, sapStaticHostMRtRowStatus, sapStaticHostMRtLastMgmtChange, sapStaticHostMRtStatus } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP static host capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 121 } tmnxSapTlsV6v1Group OBJECT-GROUP OBJECTS { sapTlsStpAdminStatus, sapTlsStpPriority, sapTlsStpPortNum, sapTlsStpPathCost, sapTlsStpRapidStart, sapTlsStpBpduEncap, sapTlsStpPortState, sapTlsStpDesignatedBridge, sapTlsStpDesignatedPort, sapTlsStpForwardTransitions, sapTlsStpInConfigBpdus, sapTlsStpInTcnBpdus, sapTlsStpInBadBpdus, sapTlsStpOutConfigBpdus, sapTlsStpOutTcnBpdus, sapTlsStpOperBpduEncap, sapTlsVpnId, sapTlsCustId, sapTlsMacAddressLimit, sapTlsNumMacAddresses, sapTlsNumStaticMacAddresses, sapTlsMacLearning, sapTlsMacAgeing, sapTlsStpOperEdge, sapTlsStpAdminPointToPoint, sapTlsStpPortRole, sapTlsStpAutoEdge, sapTlsStpOperProtocol, sapTlsStpInRstBpdus, sapTlsStpOutRstBpdus, sapTlsLimitMacMove, sapTlsMacPinning, sapTlsDiscardUnknownSource, sapTlsMvplsPruneState, sapTlsMvplsMgmtService, sapTlsMvplsMgmtPortId, sapTlsMvplsMgmtEncapValue, sapTlsArpReplyAgent, sapTlsStpException, sapTlsAuthenticationPolicy, sapTlsL2ptTermination, sapTlsBpduTranslation, sapTlsStpRootGuard, sapTlsStpInsideRegion, sapTlsEgressMcastGroup, sapTlsStpInMstBpdus, sapTlsStpOutMstBpdus, sapTlsRestProtSrcMac, sapTlsRestProtSrcMacAction, sapTlsRestUnprotDstMac, sapTlsStpRxdDesigBridge, sapTlsStpRootGuardViolation, sapTlsShcvAction, sapTlsShcvSrcIp, sapTlsShcvSrcMac, sapTlsShcvInterval, sapTlsMvplsMgmtMsti, sapTlsMacMoveNextUpTime, sapTlsMacMoveRateExcdLeft, sapTlsL2ptForceBoundary, sapTlsLimitMacMoveLevel, sapTlsBpduTransOper, sapTlsDefMsapPolicy, sapTlsL2ptProtocols, sapTlsL2ptForceProtocols, sapTlsDhcpMsapTrigger, sapTlsDhcpProxyLeaseTime, sapTlsDhcpRemoteId, sapTlsMrpJoinTime, sapTlsMrpLeaveTime, sapTlsMrpLeaveAllTime, sapTlsMrpPeriodicTime, sapTlsMrpPeriodicEnabled, sapTlsPppoePolicy } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP TLS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 122 } tmnxSapArpHostGroup OBJECT-GROUP OBJECTS { sapTlsArpHostTableLastMgmtChange, sapTlsArpHostLastMgmtChange, sapTlsArpHostAdminState, sapTlsArpHostMaxNumHosts, sapTlsArpHostMinAuthIntvl, sapTlsArpMsapTrigger, msapTlsPlcyArpHostMaxNumHosts, msapTlsPlcyArpHostMinAuthIntvl, sapArpHostStatLastClearedTime, sapArpHostStatNumHosts, sapArpHostStatTriggersRx, sapArpHostStatTriggersIgnored, sapArpHostStatTrigIgnQFull, sapArpHostStatNumForcedVerif, sapArpHostStatNumCreated, sapArpHostStatNumDeleted, sapArpHostStatNumUpdated, sapArpHostStatNumAuthReq } STATUS current DESCRIPTION "The group of objects supporting management of ARP hosts' capabilities for SAPs on Nokia SROS series systems." ::= { tmnxSapGroups 123 } tmnxSapV7v0Group OBJECT-GROUP OBJECTS { sapNumEntries, sapPortId, sapEncapValue, sapRowStatus, sapType, sapDescription, sapAdminStatus, sapOperStatus, sapIngressQosPolicyId, sapIngressMacFilterId, sapIngressIpFilterId, sapIngressVlanTranslationId, sapEgressQosPolicyId, sapEgressMacFilterId, sapEgressIpFilterId, sapMirrorStatus, sapIesIfIndex, sapLastMgmtChange, sapCollectAcctStats, sapAccountingPolicyId, sapVpnId, sapCustId, sapCustMultSvcSite, sapIngressQosSchedulerPolicy, sapEgressQosSchedulerPolicy, sapSplitHorizonGrp, sapIngressSharedQueuePolicy, sapIngressMatchQinQDot1PBits, sapOperFlags, sapLastStatusChange, sapAntiSpoofing, sapTodSuite, sapIngUseMultipointShared, sapEgressQinQMarkTopOnly, sapEgressAggRateLimit, sapEndPoint, sapIngressVlanTranslation, sapSubType, sapCpmProtPolicyId, sapCpmProtMonitorMac, sapEgressFrameBasedAccounting, sapEthernetLLFAdminStatus, sapEthernetLLFOperStatus, sapTlsMvplsRowStatus, sapEgressFrameBasedAccounting, sapCallingStationId } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP general capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 124 } tmnxSapIgmpTrkGroup OBJECT-GROUP OBJECTS { sapIgmpTrkTableLastMgmtChange, sapIgmpTrkLastMgmtChange, sapIgmpTrkExpiryTime, sapIgmpTrkImportPlcy, sapIgmpTrkMaxNbrGrps, sapIgmpTrkNbrGrps, sapIgmpTrkMaxNbrSrcs } STATUS current DESCRIPTION "The group of objects supporting management of IGMP host tracking capabilities for SAPs on Nokia SROS series systems." ::= { tmnxSapGroups 125 } tmnxSapFrGroup OBJECT-GROUP OBJECTS { sapFrInfoFrf12Mode, sapFrInfoSchedulingClass, sapFrInfoLastChanged, sapFrf12InfoFragmentThreshold, sapFrf12InfoLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP FR capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 126 } tmnxSapIpipeV7v0Group OBJECT-GROUP OBJECTS { sapIpipeCeInetAddress, sapIpipeCeInetAddressType, sapIpipeMacRefreshInterval, sapIpipeMacAddress, sapIpipeArpedMacAddress, sapIpipeArpedMacAddressTimeout, sapIpipeDiscoveredCeInetAddrType, sapIpipeDiscoveredCeInetAddr, sapIpipeUseBroadcastMac, sapIpipeUsingBroadcastMac } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP IPIPE capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 127 } tmnxSapBsxV7v0Group OBJECT-GROUP OBJECTS { sapStaticHostAppProfile, sapSubMgmtDefAppProfile, sapSubMgmtNonSubTrafficAppProf, msapPlcySubMgmtDefAppProfile, msapPlcySubMgmtNonSubTrafAppProf, sapIsaAaApplicationProfile } STATUS current DESCRIPTION "The group of objects supporting management of BSX (Application Assurance) capabilities on Nokia SROS series systems in release R7.0" ::= { tmnxSapGroups 128 } tmnxSapRadiusFallbackGroup OBJECT-GROUP OBJECTS { sapTlsDefMsapService, sapTlsDefMsapGroupIf } STATUS current DESCRIPTION "The group of objects supporting management of RADIUS fallback capabilities for SAPs on Nokia SROS series systems." ::= { tmnxSapGroups 129 } tmnxSapPbbGroup OBJECT-GROUP OBJECTS { sapPbbRowStatus, sapPbbLastMgmtChange, sapPbbIgmpSnpgMRouter } STATUS current DESCRIPTION "The group of objects supporting management of Provider Backbone Bridging (PBB/IEEE 802.1ah) capabilities for SAPs on Nokia SROS series systems." ::= { tmnxSapGroups 130 } tmnxSapFrGroupV8v0 OBJECT-GROUP OBJECTS { sapFrInfoFrf12Mode, sapFrInfoSchedulingClass, sapFrInfoLastChanged, sapFrf12InfoFragmentThreshold, sapFrf12InfoLastChanged, sapFrf12InfoInterleave } STATUS current DESCRIPTION "The group of objects supporting management of SAP FR capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 131 } tmnxSapTlsV8v0Group OBJECT-GROUP OBJECTS { sapTlsStpAdminStatus, sapTlsStpPriority, sapTlsStpPortNum, sapTlsStpPathCost, sapTlsStpRapidStart, sapTlsStpBpduEncap, sapTlsStpPortState, sapTlsStpDesignatedBridge, sapTlsStpDesignatedPort, sapTlsStpForwardTransitions, sapTlsStpInConfigBpdus, sapTlsStpInTcnBpdus, sapTlsStpInBadBpdus, sapTlsStpOutConfigBpdus, sapTlsStpOutTcnBpdus, sapTlsStpOperBpduEncap, sapTlsVpnId, sapTlsCustId, sapTlsMacAddressLimit, sapTlsNumMacAddresses, sapTlsNumStaticMacAddresses, sapTlsMacLearning, sapTlsMacAgeing, sapTlsStpOperEdge, sapTlsStpAdminPointToPoint, sapTlsStpPortRole, sapTlsStpAutoEdge, sapTlsStpOperProtocol, sapTlsStpInRstBpdus, sapTlsStpOutRstBpdus, sapTlsLimitMacMove, sapTlsMacPinning, sapTlsDiscardUnknownSource, sapTlsMvplsPruneState, sapTlsMvplsMgmtService, sapTlsMvplsMgmtPortId, sapTlsMvplsMgmtEncapValue, sapTlsArpReplyAgent, sapTlsStpException, sapTlsAuthenticationPolicy, sapTlsL2ptTermination, sapTlsBpduTranslation, sapTlsStpRootGuard, sapTlsStpInsideRegion, sapTlsEgressMcastGroup, sapTlsStpInMstBpdus, sapTlsStpOutMstBpdus, sapTlsRestProtSrcMac, sapTlsRestProtSrcMacAction, sapTlsRestUnprotDstMac, sapTlsStpRxdDesigBridge, sapTlsStpRootGuardViolation, sapTlsShcvAction, sapTlsShcvSrcIp, sapTlsShcvSrcMac, sapTlsShcvInterval, sapTlsMvplsMgmtMsti, sapTlsMacMoveNextUpTime, sapTlsMacMoveRateExcdLeft, sapTlsL2ptForceBoundary, sapTlsLimitMacMoveLevel, sapTlsBpduTransOper, sapTlsDefMsapPolicy, sapTlsL2ptProtocols, sapTlsL2ptForceProtocols, sapTlsDhcpMsapTrigger, sapTlsDhcpProxyLeaseTime, sapTlsDhcpRemoteId, sapTlsMrpJoinTime, sapTlsMrpLeaveTime, sapTlsMrpLeaveAllTime, sapTlsMrpPeriodicTime, sapTlsMrpPeriodicEnabled, sapTlsPppoePolicy, sapTlsMrpPolicy, sapTlsSiteName, sapTlsDhcp6MsapTrigger, sapTlsInTcBitBpdus, sapTlsOutTcBitBpdus } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP TLS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 132 } tmnxSapDhcpV8v0Group OBJECT-GROUP OBJECTS { sapTlsDhcpAdminState, sapTlsDhcpDescription, sapTlsDhcpSnoop, sapTlsDhcpLeasePopulate, sapTlsDhcpOperLeasePopulate, sapTlsDhcpInfoAction, sapTlsDhcpCircuitId, sapTlsDhcpRemoteIdString, sapTlsDhcpProxyAdminState, sapTlsDhcpProxyServerAddr, sapTlsDhcpProxyLTRadiusOverride, sapTlsDhcpVendorIncludeOptions, sapTlsDhcpVendorOptionString, sapTlsDhcpStatsClntSnoopdPckts, sapTlsDhcpStatsSrvrSnoopdPckts, sapTlsDhcpStatsClntForwdPckts, sapTlsDhcpStatsSrvrForwdPckts, sapTlsDhcpStatsClntDropdPckts, sapTlsDhcpStatsSrvrDropdPckts, sapTlsDhcpStatsClntProxRadPckts, sapTlsDhcpStatsClntProxLSPckts, sapTlsDhcpStatsGenReleasePckts, sapTlsDhcpStatsGenForceRenPckts, sapDhcpOperLeasePopulate } STATUS current DESCRIPTION "The group of objects supporting management of SAP TLS DHCP capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 133 } tmnxSapV8v0Group OBJECT-GROUP OBJECTS { sapNumEntries, sapPortId, sapEncapValue, sapRowStatus, sapType, sapDescription, sapAdminStatus, sapOperStatus, sapIngressQosPolicyId, sapIngressMacFilterId, sapIngressIpFilterId, sapIngressVlanTranslationId, sapEgressQosPolicyId, sapEgressMacFilterId, sapEgressIpFilterId, sapMirrorStatus, sapIesIfIndex, sapLastMgmtChange, sapCollectAcctStats, sapAccountingPolicyId, sapVpnId, sapCustId, sapCustMultSvcSite, sapIngressQosSchedulerPolicy, sapEgressQosSchedulerPolicy, sapSplitHorizonGrp, sapIngressSharedQueuePolicy, sapIngressMatchQinQDot1PBits, sapOperFlags, sapLastStatusChange, sapAntiSpoofing, sapTodSuite, sapIngUseMultipointShared, sapEgressQinQMarkTopOnly, sapEgressAggRateLimit, sapEndPoint, sapIngressVlanTranslation, sapSubType, sapCpmProtPolicyId, sapCpmProtMonitorMac, sapEgressFrameBasedAccounting, sapEthernetLLFAdminStatus, sapEthernetLLFOperStatus, sapTlsMvplsRowStatus, sapEgressFrameBasedAccounting, sapCallingStationId, sapIngPolicerPolicy, sapEgrPolicerPolicy, sapIpv6HostInfoIpoeDhcp6Hosts, sapIpv6HostInfoPppDhcp6Hosts, sapIpv6HostInfoPppSLAACHosts, sapIngQosQMBSBytes, sapEgrQosQMBSBytes } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP general capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 134 } tmnxSapFPropBMacV8v0Group OBJECT-GROUP OBJECTS { sapFPropBMacAddrTblLastChgd, sapFPropBMacAddrRowStatus } STATUS current DESCRIPTION "The group of objects supporting management of SAP fault propagation BMac addresses on Nokia SROS series systems." ::= { tmnxSapGroups 135 } tmnxSapPlcrV8v0Group OBJECT-GROUP OBJECTS { sapIngPlcrCtrlOvrLastChgd, sapIngPlcrCtrlOvrLvlLastChgd, sapIngPlcrCtrlOvrLvlMBS, sapIngPlcrCtrlOvrLvlTblLastChgd, sapIngPlcrCtrlOvrMaxRate, sapIngPlcrCtrlOvrMinMBSSep, sapIngPlcrCtrlOvrRowStatus, sapIngPlcrCtrlOvrTblLastChgd, sapIngPlcrOvrAdminCIR, sapIngPlcrOvrAdminPIR, sapIngPlcrOvrCBS, sapIngPlcrOvrPktOffset, sapIngPlcrOvrLastChgd, sapIngPlcrOvrMBS, sapIngPlcrOvrRowStatus, sapIngPlcrOvrStatMode, sapIngPlcrOvrTblLastChgd, sapEgrPlcrCtrlOvrLastChgd, sapEgrPlcrCtrlOvrLvlLastChgd, sapEgrPlcrCtrlOvrLvlMBS, sapEgrPlcrCtrlOvrLvlTblLastChgd, sapEgrPlcrCtrlOvrMaxRate, sapEgrPlcrCtrlOvrMinMBSSep, sapEgrPlcrCtrlOvrRowStatus, sapEgrPlcrCtrlOvrTblLastChgd, sapEgrPlcrOvrAdminCIR, sapEgrPlcrOvrAdminPIR, sapEgrPlcrOvrCBS, sapEgrPlcrOvrPktOffset, sapEgrPlcrOvrLastChgd, sapEgrPlcrOvrMBS, sapEgrPlcrOvrRowStatus, sapEgrPlcrOvrStatMode, sapEgrPlcrOvrTblLastChgd } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Policer on Nokia SROS series systems." ::= { tmnxSapGroups 136 } tmnxSapTlsV7v0Group OBJECT-GROUP OBJECTS { sapTlsShcvRetryTimeout, sapTlsShcvRetryCount } STATUS current DESCRIPTION "The group of objects supporting management of SAP TLS capabilities on Nokia SROS series systems added in release 7.0." ::= { tmnxSapGroups 137 } tmnxSapSubMgmtV8v0Group OBJECT-GROUP OBJECTS { sapSubMgmtAdminStatus, sapSubMgmtDefSubProfile, sapSubMgmtDefSlaProfile, sapSubMgmtSubIdentPolicy, sapSubMgmtSubscriberLimit, sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubIdent, sapSubMgmtNonSubTrafficSubProf, sapSubMgmtNonSubTrafficSlaProf, sapSubMgmtMacDaHashing, sapSubMgmtDefSubIdent, sapSubMgmtDefSubIdentString, sapSubMgmtDefInterDestId, sapSubMgmtDefInterDestIdString } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Sub-management capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 138 } tmnxSapMsapV8v0Group OBJECT-GROUP OBJECTS { msapPlcyRowStatus, msapPlcyLastChanged, msapPlcyDescription, msapPlcyCpmProtPolicyId, msapPlcyCpmProtMonitorMac, msapPlcySubMgmtDefSubId, msapPlcySubMgmtDefSubIdStr, msapPlcySubMgmtDefSubProfile, msapPlcySubMgmtDefSlaProfile, msapPlcySubMgmtSubIdPlcy, msapPlcySubMgmtSubscriberLimit, msapPlcySubMgmtProfiledTrafOnly, msapPlcySubMgmtNonSubTrafSubId, msapPlcySubMgmtNonSubTrafSubProf, msapPlcySubMgmtNonSubTrafSlaProf, msapPlcySubMgmtDefInterDestId, msapPlcySubMgmtDefInterDestIdStr, msapPlcyAssociatedMsaps, msapPlcyIgmpTrkExpiryTime, msapPlcyIgmpTrkImportPlcy, msapPlcyIgmpTrkMaxNbrGrps, msapPlcyIgmpTrkMaxNbrSrcs, msapTlsPlcyLastChanged, msapTlsPlcySplitHorizonGrp, msapTlsPlcyArpReplyAgent, msapTlsPlcySubMgmtMacDaHashing, msapTlsPlcyDhcpLeasePopulate, msapTlsPlcyDhcpPrxyAdminState, msapTlsPlcyDhcpPrxyServAddr, msapTlsPlcyDhcpPrxyServAddrType, msapTlsPlcyDhcpPrxyLTRadOverride, msapTlsPlcyDhcpInfoAction, msapTlsPlcyDhcpCircuitId, msapTlsPlcyDhcpRemoteId, msapTlsPlcyDhcpRemoteIdString, msapTlsPlcyDhcpVendorInclOpts, msapTlsPlcyDhcpVendorOptStr, msapTlsPlcyDhcpPrxyLeaseTime, msapTlsPlcyEgressMcastGroup, msapTlsPlcyIgmpSnpgImportPlcy, msapTlsPlcyIgmpSnpgFastLeave, msapTlsPlcyIgmpSnpgSendQueries, msapTlsPlcyIgmpSnpgGenQueryIntv, msapTlsPlcyIgmpSnpgQueryRespIntv, msapTlsPlcyIgmpSnpgRobustCount, msapTlsPlcyIgmpSnpgLastMembIntvl, msapTlsPlcyIgmpSnpgMaxNbrGrps, msapTlsPlcyIgmpSnpgMvrFromVplsId, msapTlsPlcyIgmpSnpgVersion, msapTlsPlcyIgmpSnpgMcacPlcyName, msapTlsPlcyIgmpSnpgMcacPrRsvMnBW, msapTlsPlcyIgmpSnpgMcacUncnstBW, msapIgmpSnpgMcacLevelRowStatus, msapIgmpSnpgMcacLevelLastChanged, msapIgmpSnpgMcacLevelBW, msapIgmpSnpgMcacLagRowStatus, msapIgmpSnpgMcacLagLastChanged, msapIgmpSnpgMcacLagLevel, msapInfoCreationSapPortEncapVal, msapInfoCreationPlcyName, msapInfoReEvalPolicy, msapInfoLastChanged, msapCaptureSapStatsPktsRecvd, msapCaptureSapStatsPktsRedirect, msapCaptureSapStatsPktsDropped, msapPlcyTblLastChgd, msapTlsPlcyTblLastChgd, msapIgmpSnpgMcacLvlTblLastChgd, msapIgmpSnpgMcacLagTblLastChgd, msapInfoTblLastChgd } STATUS obsolete DESCRIPTION "The group of objects supporting management of managed SAP capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 139 } tmnxSapQosV8v0Group OBJECT-GROUP OBJECTS { sapIngQosQueueId, sapIngQosQueueStatsOfferedHiPrioPackets, sapIngQosQueueStatsDroppedHiPrioPackets, sapIngQosQueueStatsOfferedLoPrioPackets, sapIngQosQueueStatsDroppedLoPrioPackets, sapIngQosQueueStatsOfferedHiPrioOctets, sapIngQosQueueStatsDroppedHiPrioOctets, sapIngQosQueueStatsOfferedLoPrioOctets, sapIngQosQueueStatsDroppedLoPrioOctets, sapIngQosQueueStatsForwardedInProfPackets, sapIngQosQueueStatsForwardedOutProfPackets, sapIngQosQueueStatsForwardedInProfOctets, sapIngQosQueueStatsForwardedOutProfOctets, sapIngQosCustId, sapIngQosQueueStatsUncoloredPacketsOffered, sapIngQosQueueStatsUncoloredOctetsOffered, sapEgrQosQueueId, sapEgrQosQueueStatsForwardedInProfPackets, sapEgrQosQueueStatsDroppedInProfPackets, sapEgrQosQueueStatsForwardedOutProfPackets, sapEgrQosQueueStatsDroppedOutProfPackets, sapEgrQosQueueStatsForwardedInProfOctets, sapEgrQosQueueStatsDroppedInProfOctets, sapEgrQosQueueStatsForwardedOutProfOctets, sapEgrQosQueueStatsDroppedOutProfOctets, sapEgrQosCustId, sapIngQosSchedStatsForwardedPackets, sapIngQosSchedStatsForwardedOctets, sapIngQosSchedCustId, sapEgrQosSchedStatsForwardedPackets, sapEgrQosSchedStatsForwardedOctets, sapEgrQosSchedCustId, sapIngQosQRowStatus, sapIngQosQLastMgmtChange, sapIngQosQOverrideFlags, sapIngQosQCBS, sapIngQosQHiPrioOnly, sapIngQosQCIRAdaptation, sapIngQosQPIRAdaptation, sapIngQosQAdminPIR, sapIngQosQAdminCIR, sapEgrQosQRowStatus, sapEgrQosQLastMgmtChange, sapEgrQosQOverrideFlags, sapEgrQosQCBS, sapEgrQosQHiPrioOnly, sapEgrQosQCIRAdaptation, sapEgrQosQPIRAdaptation, sapEgrQosQAdminPIR, sapEgrQosQAdminCIR, sapEgrQosQAvgOverhead, sapIngQosSRowStatus, sapIngQosSLastMgmtChange, sapIngQosSOverrideFlags, sapIngQosSPIR, sapIngQosSCIR, sapIngQosSSummedCIR, sapEgrQosSRowStatus, sapEgrQosSLastMgmtChange, sapEgrQosSOverrideFlags, sapEgrQosSPIR, sapEgrQosSCIR, sapEgrQosSSummedCIR, sapIngQosPStatsCustId, sapIngQosPStatsMode, sapIngQosPStatsOffHiPrioPkts, sapIngQosPStatsOffHiPrioPktsLo, sapIngQosPStatsOffHiPrioPktsHi, sapIngQosPStatsDrpHiPrioPkts, sapIngQosPStatsDrpHiPrioPktsLo, sapIngQosPStatsDrpHiPrioPktsHi, sapIngQosPStatsOffLoPrioPkts, sapIngQosPStatsOffLoPrioPktsLo, sapIngQosPStatsOffLoPrioPktsHi, sapIngQosPStatsDrpLoPrioPkts, sapIngQosPStatsDrpLoPrioPktsLo, sapIngQosPStatsDrpLoPrioPktsHi, sapIngQosPStatsOffHiPrioOcts, sapIngQosPStatsOffHiPrioOctsLo, sapIngQosPStatsOffHiPrioOctsHi, sapIngQosPStatsDrpHiPrioOcts, sapIngQosPStatsDrpHiPrioOctsLo, sapIngQosPStatsDrpHiPrioOctsHi, sapIngQosPStatsOffLoPrioOcts, sapIngQosPStatsOffLoPrioOctsLo, sapIngQosPStatsOffLoPrioOctsHi, sapIngQosPStatsDrpLoPrioOcts, sapIngQosPStatsDrpLoPrioOctsLo, sapIngQosPStatsDrpLoPrioOctsHi, sapIngQosPStatsFwdInProfPkts, sapIngQosPStatsFwdInProfPktsLo, sapIngQosPStatsFwdInProfPktsHi, sapIngQosPStatsFwdOutProfPkts, sapIngQosPStatsFwdOutProfPktsLo, sapIngQosPStatsFwdOutProfPktsHi, sapIngQosPStatsFwdInProfOcts, sapIngQosPStatsFwdInProfOctsLo, sapIngQosPStatsFwdInProfOctsHi, sapIngQosPStatsFwdOutProfOcts, sapIngQosPStatsFwdOutProfOctsLo, sapIngQosPStatsFwdOutProfOctsHi, sapIngQosPStatsUncolPktsOff, sapIngQosPStatsUncolPktsOffLo, sapIngQosPStatsUncolPktsOffHi, sapIngQosPStatsUncolOctsOff, sapIngQosPStatsUncolOctsOffLo, sapIngQosPStatsUncolOctsOffHi, sapEgrQosPStatsCustId, sapEgrQosPStatsMode, sapEgrQosPStatsOffInProfPkts, sapEgrQosPStatsOffInProfPktsLo, sapEgrQosPStatsOffInProfPktsHi, sapEgrQosPStatsFwdInProfPkts, sapEgrQosPStatsFwdInProfPktsLo, sapEgrQosPStatsFwdInProfPktsHi, sapEgrQosPStatsDrpInProfPkts, sapEgrQosPStatsDrpInProfPktsLo, sapEgrQosPStatsDrpInProfPktsHi, sapEgrQosPStatsOffOutProfPkts, sapEgrQosPStatsOffOutProfPktsLo, sapEgrQosPStatsOffOutProfPktsHi, sapEgrQosPStatsFwdOutProfPkts, sapEgrQosPStatsFwdOutProfPktsLo, sapEgrQosPStatsFwdOutProfPktsHi, sapEgrQosPStatsDrpOutProfPkts, sapEgrQosPStatsDrpOutProfPktsLo, sapEgrQosPStatsDrpOutProfPktsHi, sapEgrQosPStatsOffInProfOcts, sapEgrQosPStatsOffInProfOctsLo, sapEgrQosPStatsOffInProfOctsHi, sapEgrQosPStatsFwdInProfOcts, sapEgrQosPStatsFwdInProfOctsLo, sapEgrQosPStatsFwdInProfOctsHi, sapEgrQosPStatsDrpInProfOcts, sapEgrQosPStatsDrpInProfOctsLo, sapEgrQosPStatsDrpInProfOctsHi, sapEgrQosPStatsOffOutProfOcts, sapEgrQosPStatsOffOutProfOctsLo, sapEgrQosPStatsOffOutProfOctsHi, sapEgrQosPStatsFwdOutProfOcts, sapEgrQosPStatsFwdOutProfOctsLo, sapEgrQosPStatsFwdOutProfOctsHi, sapEgrQosPStatsDrpOutProfOcts, sapEgrQosPStatsDrpOutProfOctsLo, sapEgrQosPStatsDrpOutProfOctsHi, sapEgrQosPStatsUncolPktsOff, sapEgrQosPStatsUncolPktsOffLo, sapEgrQosPStatsUncolPktsOffHi, sapEgrQosPStatsUncolOctsOff, sapEgrQosPStatsUncolOctsOffLo, sapEgrQosPStatsUncolOctsOffHi, sapIgQosPlcyPStatCustId, sapIgQosPlcyPStatMode, sapIgQosPlcyPStatOffHiPrioPkts, sapIgQosPlcyPStatDrpHiPrioPkts, sapIgQosPlcyPStatOffLoPrioPkts, sapIgQosPlcyPStatDrpLoPrioPkts, sapIgQosPlcyPStatOffHiPrioOcts, sapIgQosPlcyPStatDrpHiPrioOcts, sapIgQosPlcyPStatOffLoPrioOcts, sapIgQosPlcyPStatDrpLoPrioOcts, sapIgQosPlcyPStatFwdInProfPkts, sapIgQosPlcyPStatFwdOutProfPkts, sapIgQosPlcyPStatFwdInProfOcts, sapIgQosPlcyPStatFwdOutProfOcts, sapIgQosPlcyPStatUncolPktsOff, sapIgQosPlcyPStatUncolOctsOff, sapIgQosPlcyPStatOffHiPrioPkts, sapIgQosPlcyPStatOffHiPrioPktsL, sapIgQosPlcyPStatOffHiPrioPktsH, sapIgQosPlcyPStatDrpHiPrioPkts, sapIgQosPlcyPStatDrpHiPrioPktsL, sapIgQosPlcyPStatDrpHiPrioPktsH, sapIgQosPlcyPStatOffLoPrioPkts, sapIgQosPlcyPStatOffLoPrioPktsL, sapIgQosPlcyPStatOffLoPrioPktsH, sapIgQosPlcyPStatDrpLoPrioPkts, sapIgQosPlcyPStatDrpLoPrioPktsL, sapIgQosPlcyPStatDrpLoPrioPktsH, sapIgQosPlcyPStatOffHiPrioOcts, sapIgQosPlcyPStatOffHiPrioOctsL, sapIgQosPlcyPStatOffHiPrioOctsH, sapIgQosPlcyPStatDrpHiPrioOcts, sapIgQosPlcyPStatDrpHiPrioOctsL, sapIgQosPlcyPStatDrpHiPrioOctsH, sapIgQosPlcyPStatOffLoPrioOcts, sapIgQosPlcyPStatOffLoPrioOctsL, sapIgQosPlcyPStatOffLoPrioOctsH, sapIgQosPlcyPStatDrpLoPrioOcts, sapIgQosPlcyPStatDrpLoPrioOctsL, sapIgQosPlcyPStatDrpLoPrioOctsH, sapIgQosPlcyPStatFwdInProfPkts, sapIgQosPlcyPStatFwdInProfPktsL, sapIgQosPlcyPStatFwdInProfPktsH, sapIgQosPlcyPStatFwdOutProfPkts, sapIgQosPlcyPStatFwdOutProfPktsL, sapIgQosPlcyPStatFwdOutProfPktsH, sapIgQosPlcyPStatFwdInProfOcts, sapIgQosPlcyPStatFwdInProfOctsL, sapIgQosPlcyPStatFwdInProfOctsH, sapIgQosPlcyPStatFwdOutProfOcts, sapIgQosPlcyPStatFwdOutProfOctsL, sapIgQosPlcyPStatFwdOutProfOctsH, sapIgQosPlcyPStatUncolPktsOff, sapIgQosPlcyPStatUncolPktsOffL, sapIgQosPlcyPStatUncolPktsOffH, sapIgQosPlcyPStatUncolOctsOff, sapIgQosPlcyPStatUncolOctsOffL, sapIgQosPlcyPStatUncolOctsOffH, sapEgQosPlcyPStatCustId, sapEgQosPlcyPStatMode, sapEgQosPlcyPStatOffInProfPkts, sapEgQosPlcyPStatOffInProfPktsL, sapEgQosPlcyPStatOffInProfPktsH, sapEgQosPlcyPStatFwdInProfPkts, sapEgQosPlcyPStatFwdInProfPktsL, sapEgQosPlcyPStatFwdInProfPktsH, sapEgQosPlcyPStatDrpInProfPkts, sapEgQosPlcyPStatDrpInProfPktsL, sapEgQosPlcyPStatDrpInProfPktsH, sapEgQosPlcyPStatOffOutProfPkts, sapEgQosPlcyPStatOffOutProfPktsL, sapEgQosPlcyPStatOffOutProfPktsH, sapEgQosPlcyPStatFwdOutProfPkts, sapEgQosPlcyPStatFwdOutProfPktsL, sapEgQosPlcyPStatFwdOutProfPktsH, sapEgQosPlcyPStatDrpOutProfPkts, sapEgQosPlcyPStatDrpOutProfPktsL, sapEgQosPlcyPStatDrpOutProfPktsH, sapEgQosPlcyPStatOffInProfOcts, sapEgQosPlcyPStatOffInProfOctsL, sapEgQosPlcyPStatOffInProfOctsH, sapEgQosPlcyPStatFwdInProfOcts, sapEgQosPlcyPStatFwdInProfOctsL, sapEgQosPlcyPStatFwdInProfOctsH, sapEgQosPlcyPStatDrpInProfOcts, sapEgQosPlcyPStatDrpInProfOctsL, sapEgQosPlcyPStatDrpInProfOctsH, sapEgQosPlcyPStatOffOutProfOcts, sapEgQosPlcyPStatOffOutProfOctsL, sapEgQosPlcyPStatOffOutProfOctsH, sapEgQosPlcyPStatFwdOutProfOcts, sapEgQosPlcyPStatFwdOutProfOctsL, sapEgQosPlcyPStatFwdOutProfOctsH, sapEgQosPlcyPStatDrpOutProfOcts, sapEgQosPlcyPStatDrpOutProfOctsL, sapEgQosPlcyPStatDrpOutProfOctsH, sapEgrQosArbitStatsFwdOcts, sapEgrQosArbitStatsFwdOctsHi, sapEgrQosArbitStatsFwdOctsLo, sapEgrQosArbitStatsFwdPkts, sapEgrQosArbitStatsFwdPktsHi, sapEgrQosArbitStatsFwdPktsLo, sapIngQosArbitStatsFwdOcts, sapIngQosArbitStatsFwdOctsHi, sapIngQosArbitStatsFwdOctsLo, sapIngQosArbitStatsFwdPkts, sapIngQosArbitStatsFwdPktsHi, sapIngQosArbitStatsFwdPktsLo, sapPortIdEgrQosArbitFwdOcts, sapPortIdEgrQosArbitFwdOctsHi, sapPortIdEgrQosArbitFwdOctsLo, sapPortIdEgrQosArbitFwdPkts, sapPortIdEgrQosArbitFwdPktsHi, sapPortIdEgrQosArbitFwdPktsLo, sapPortIdIngQosArbitFwdOcts, sapPortIdIngQosArbitFwdOctsHi, sapPortIdIngQosArbitFwdOctsLo, sapPortIdIngQosArbitFwdPkts, sapPortIdIngQosArbitFwdPktsHi, sapPortIdIngQosArbitFwdPktsLo } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 140 } tmnxSapMrpV8v0Group OBJECT-GROUP OBJECTS { sapTlsMrpRxPdus, sapTlsMrpDroppedPdus, sapTlsMrpTxPdus, sapTlsMrpRxNewEvent, sapTlsMrpRxJoinInEvent, sapTlsMrpRxInEvent, sapTlsMrpRxJoinEmptyEvent, sapTlsMrpRxEmptyEvent, sapTlsMrpRxLeaveEvent, sapTlsMrpTxNewEvent, sapTlsMrpTxJoinInEvent, sapTlsMrpTxInEvent, sapTlsMrpTxJoinEmptyEvent, sapTlsMrpTxEmptyEvent, sapTlsMrpTxLeaveEvent, sapTlsMmrpDeclared, sapTlsMmrpRegistered, sapTlsMmrpEndStation } STATUS current DESCRIPTION "The group of objects supporting management of SAP MRP capabilities on release 8.0 of Nokia SROS series systems." ::= { tmnxSapGroups 141 } tmnxSapMvrpV8v0Group OBJECT-GROUP OBJECTS { sapTmplLastChanged, sapTmplRowStatus, sapTmplSapCount, sapTmplType, sapTmplTblLastChanged, sapTmplTlsLastChanged, sapTmplTlsMacAgeing, sapTmplTlsTblLastChanged, sapTlsEsVidGrpEndVlanTag, sapTlsEsVidGrpLastChgd, sapTlsEsVidGrpRowStatus, sapTlsEsVidGrpStartVlanTag, sapTlsEsVidGrpTblLastChanged, sapTmplUsed, sapTmplUserCreationOrigin, sapTmplUserCreatorSvcId, sapTmplCollectAcctStats, sapTmplEgrPolicerPolicy, sapTmplEgressAggRateLimit, sapTmplEgressFrameBasedAcctg, sapTmplEgressIpFilterId, sapTmplEgressIpv6FilterId, sapTmplEgressMacFilterId, sapTmplEgressQinQMarkTopOnly, sapTmplEgressQosPolicyId, sapTmplEgressQosSchedulerPolicy, sapTmplIngPolicerPolicy, sapTmplIngUseMultipointShared, sapTmplIngressAggRateLimit, sapTmplIngressIpFilterId, sapTmplIngressIpv6FilterId, sapTmplIngressMacFilterId, sapTmplIngressMatchQinQDot1PBits, sapTmplIngressQosPolicyId, sapTmplIngressQosSchedulerPolicy, sapTmplIngressSharedQueuePolicy, sapTmplTlsBpduTranslation, sapTmplTlsDiscardUnknownSource, sapTmplTlsL2ptProtocols, sapTmplTlsL2ptTermination, sapTmplTlsLimitMacMove, sapTmplTlsLimitMacMoveLevel, sapTmplTlsMacAddressLimit, sapTmplTlsMacLearning, sapTmplTlsStpAdminPointToPoint, sapTmplTlsStpAdminStatus, sapTmplTlsStpAutoEdge, sapTmplTlsStpBpduEncap, sapTmplTlsStpPathCost, sapTmplTlsStpPriority, sapTmplTlsStpRapidStart, sapTmplTlsStpRootGuard, sapTmplDot1agCfmMip, sapTmplCpmProtPolicyId, sapTmplCpmProtMonitorMac, sapTlsDataSapInstStatus, sapTlsDataSapInstLastErr, sapTlsMvrpDeclared, sapTlsMvrpEndStation, sapTlsMvrpRegistered, sapTlsMvrpAdminStatus, sapTlsMvrpOperStatus, sapTlsInTcBitBpdus, sapTlsOutTcBitBpdus } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP MVRP capabilities on release 8.0R4 of Nokia SROS series systems." ::= { tmnxSapGroups 142 } tmnxSapIpipeV8v0Group OBJECT-GROUP OBJECTS { sapIpipeCeInetAddress, sapIpipeCeInetAddressType, sapIpipeMacRefreshInterval, sapIpipeMacAddress, sapIpipeArpedMacAddress, sapIpipeArpedMacAddressTimeout, sapIpipeDiscoveredCeInetAddrType, sapIpipeDiscoveredCeInetAddr, sapIpipeUseBroadcastMac, sapIpipeUsingBroadcastMac, sapIpipeIpv6LinkLocalCeInetAddr, sapIpipeIpv6GlobalCeInetAddr, sapIpipeIpv6DiscoveredMacAddress } STATUS current DESCRIPTION "The group of objects supporting management of SAP IPIPE capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 143 } tmnxSapEthRingGroup OBJECT-GROUP OBJECTS { sapEthRingIndex } STATUS current DESCRIPTION "The group of objects supporting management of SAP ETH-RING capabilities on Nokia SROS systems." ::= { tmnxSapGroups 144 } tmnxSapOverrideV8v0Group OBJECT-GROUP OBJECTS { sapIngQosQWeight, sapIngQosQCIRWeight, sapEgrQosQWeight, sapEgrQosQCIRWeight } STATUS current DESCRIPTION "The group of objects supporting management of SAP override capabilities on release 8.0R4 of Nokia SROS series systems." ::= { tmnxSapGroups 145 } tmnxSapV9v0Group OBJECT-GROUP OBJECTS { sapOperGrp, sapMonitorOperGrp, sapIngressFlowspec, sapTlsPppMsapTrigger, sapTlsPppPolicy, sapTlsTrackSrrpInst, sapTlsPppUserDb, sapTlsPppoeUserDb, sapHostsAdminState } STATUS current DESCRIPTION "The group of objects supporting management of SAP general capabilities on release 9.0 of Nokia SROS series systems." ::= { tmnxSapGroups 146 } tmnxSapAtmV9v0Group OBJECT-GROUP OBJECTS { sapAtmSubPppIndex, sapAtmDetectedEncapsulation, sapAtmIngressTrafficDescIndexOvr, sapAtmEgressTrafficDescIndexOvr, sapAtmVcRangeRowStatus, sapAtmVcRangeLastMgmtChange, sapAtmVcRangeVpiStart, sapAtmVcRangeVpiEnd, sapAtmVcRangeVciStart, sapAtmVcRangeVciEnd, sapAtmPppStatsRxPackets, sapAtmPppStatsRxDropped, sapAtmPppStatsTxPackets } STATUS current DESCRIPTION "The group of objects supporting management of SAP ATM capabilities that were added in release 9.0 of Nokia SROS series systems." ::= { tmnxSapGroups 147 } tmnxSapEthCfmMonitorGroup OBJECT-GROUP OBJECTS { sapCpmProtEthCfmMonitorFlags, sapTmplCpmProtEthCfmMonitorFlags } STATUS current DESCRIPTION "The group of objects supporting management of SAP Ethernet Connectivity Fault Management Monitoring capabilities on release 8.0 R4 of Nokia SROS series systems." ::= { tmnxSapGroups 148 } tmnxSapGreGroup OBJECT-GROUP OBJECTS { tmnxGreTunnelAdminState, tmnxGreTunnelBackupRemIpAddr, tmnxGreTunnelBackupRemIpAddrType, tmnxGreTunnelOperRemIpAddr, tmnxGreTunnelOperRemIpAddrType, tmnxGreTunnelBytesRx, tmnxGreTunnelBytesRxHi, tmnxGreTunnelBytesRxLo, tmnxGreTunnelBytesTx, tmnxGreTunnelBytesTxHi, tmnxGreTunnelBytesTxLo, tmnxGreTunnelDeliverySvcId, tmnxGreTunnelDescription, tmnxGreTunnelDscp, tmnxGreTunnelLastChanged, tmnxGreTunnelDstIpAddr, tmnxGreTunnelDstIpAddrType, tmnxGreTunnelLclIpAddr, tmnxGreTunnelLclIpAddrType, tmnxGreTunnelOperFlags, tmnxGreTunnelOperState, tmnxGreTunnelPktsRx, tmnxGreTunnelPktsRxHi, tmnxGreTunnelPktsRxLo, tmnxGreTunnelPktsTx, tmnxGreTunnelPktsTxHi, tmnxGreTunnelPktsTxLo, tmnxGreTunnelRemIpAddr, tmnxGreTunnelRemIpAddrType, tmnxGreTunnelRowStatus, tmnxGreTunnelRxErrors, tmnxGreTunnelTableLastChanged, tmnxGreTunnelTxErrors, tmnxGreTunnelInvalidChksumRx, tmnxGreTunnelInvalidChksumRxHi, tmnxGreTunnelInvalidChksumRxLo, tmnxGreTunnelKeyIgnoredRx, tmnxGreTunnelKeyIgnoredRxHi, tmnxGreTunnelKeyIgnoredRxLo, tmnxGreTunnelLoopsRx, tmnxGreTunnelLoopsRxHi, tmnxGreTunnelLoopsRxLo, tmnxGreTunnelSeqIgnoredRx, tmnxGreTunnelSeqIgnoredRxHi, tmnxGreTunnelSeqIgnoredRxLo, tmnxGreTunnelTooBigTx, tmnxGreTunnelTooBigTxHi, tmnxGreTunnelTooBigTxLo, tmnxGreTunnelVersUnsupRx, tmnxGreTunnelVersUnsupRxHi, tmnxGreTunnelVersUnsupRxLo, tmnxSapGreTunnelCount } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP GRE specific capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 149 } tmnxSapIgmpTrkV8v0Group OBJECT-GROUP OBJECTS { sapIgmpTrkDisRtrAlertChk } STATUS current DESCRIPTION "The group of objects supporting management of IGMP host tracking capabilities for SAPs on release 8.0 Nokia SROS series systems." ::= { tmnxSapGroups 150 } tmnxSapBsxV9v0Group OBJECT-GROUP OBJECTS { sapTransitIpPolicyId, sapTransitPrefixPolicyId } STATUS current DESCRIPTION "The group of objects supporting management of BSX (Application Assurance) SAP capabilities on Nokia SROS series systems in release 9.0" ::= { tmnxSapGroups 151 } tmnxSapMsapV9v0Group OBJECT-GROUP OBJECTS { msapAtmPlcyLastChanged, msapAtmPlcyIngTrafficDescIndex, msapAtmPlcyEgrTrafficDescIndex, msapAtmPlcyOamAlarmCellHandling, msapAtmPlcyOamPeriodicLoopback, msapAtmPlcyTblLastChgd } STATUS current DESCRIPTION "The group of objects supporting management of managed SAP capabilities on Nokia SROS series systems added in release 9.0." ::= { tmnxSapGroups 152 } tmnxSapOverrideV9v0Group OBJECT-GROUP OBJECTS { sapIngQosQAdminPIRPercent, sapIngQosQAdminCIRPercent, sapEgrQosQAdminPIRPercent, sapEgrQosQAdminCIRPercent } STATUS current DESCRIPTION "The group of objects supporting management of SAP override capabilities on Nokia SROS series systems added in release 9.0." ::= { tmnxSapGroups 153 } tmnxSapPlcrV9v0Group OBJECT-GROUP OBJECTS { sapEgrPlcrOvrAdminPIRPercent, sapEgrPlcrOvrAdminCIRPercent, sapIngPlcrOvrAdminPIRPercent, sapIngPlcrOvrAdminCIRPercent } STATUS current DESCRIPTION "The group of objects supporting management of SAP Policer on Nokia SROS series systems in release 9.0." ::= { tmnxSapGroups 154 } tmnxSapEgrEncapGrpV9v0Group OBJECT-GROUP OBJECTS { sapEgrEncapGroupTblLastChgd, sapEgrEncapGroupRowStatus, sapEgrEncapGroupLastChanged, sapEgrEncapGroupType, sapEgrEncapGroupQosPerMember, sapEgrEncapGroupQosPolicyId, sapEgrEncapGroupSchedulerPolicy, sapEgrEncapGroupAggRateLimit, sapEgrEncapGrpFrameBasedAccnt, sapEgrEncapGrpMemActTblLastChgd, sapEgrEncapGroupBeginMember, sapEgrEncapGroupEndMember, sapEgrEncapGroupMemberAction, sapEgrEncapGrpRangeEndId, sapEgrEncapGrpMemberLastChanged, sapEgrEGBaseStLastClearedTime, sapEgrEGBaseStCustId, sapEgrEGBaseStQcDpdInPfPkts, sapEgrEGBaseStQcDpdInPfPkts, sapEgrEGBaseStQcDpdInPfPktsL, sapEgrEGBaseStQcDpdInPfPktsH, sapEgrEGBaseStQcDpdInPfOcts, sapEgrEGBaseStQcDpdInPfOctsL, sapEgrEGBaseStQcDpdInPfOctsH, sapEgrEGBaseStQcDpdOutPfPkts, sapEgrEGBaseStQcDpdOutPfPktsL, sapEgrEGBaseStQcDpdOutPfPktsH, sapEgrEGBaseStQcDpdOutPfOcts, sapEgrEGBaseStQcDpdOutPfOctsL, sapEgrEGBaseStQcDpdOutPfOctsH, sapEgrEGBaseStQcFwdInPfPkts, sapEgrEGBaseStQcFwdInPfPktsL, sapEgrEGBaseStQcFwdInPfPktsH, sapEgrEGBaseStQcFwdInPfOcts, sapEgrEGBaseStQcFwdInPfOctsL, sapEgrEGBaseStQcFwdInPfOctsH, sapEgrEGBaseStQcFwdOutPfPkts, sapEgrEGBaseStQcFwdOutPfPktsL, sapEgrEGBaseStQcFwdOutPfPktsH, sapEgrEGBaseStQcFwdOutPfOcts, sapEgrEGBaseStQcFwdOutPfOctsL, sapEgrEGBaseStQcFwdOutPfOctsH, sapEgrEGMbrBaseStQcDpdInPfPkts, sapEgrEGMbrBaseStQcDpdInPfPktsL, sapEgrEGMbrBaseStQcDpdInPfPktsH, sapEgrEGMbrBaseStQcDpdInPfOcts, sapEgrEGMbrBaseStQcDpdInPfOctsL, sapEgrEGMbrBaseStQcDpdInPfOctsH, sapEgrEGMbrBaseStQcDpdOutPfPkts, sapEgrEGMbrBaseStQcDpdOutPfPktsL, sapEgrEGMbrBaseStQcDpdOutPfPktsH, sapEgrEGMbrBaseStQcDpdOutPfOcts, sapEgrEGMbrBaseStQcDpdOutPfOctsL, sapEgrEGMbrBaseStQcDpdOutPfOctsH, sapEgrEGMbrBaseStQcFwdInPfPkts, sapEgrEGMbrBaseStQcFwdInPfPktsL, sapEgrEGMbrBaseStQcFwdInPfPktsH, sapEgrEGMbrBaseStQcFwdInPfOcts, sapEgrEGMbrBaseStQcFwdInPfOctsL, sapEgrEGMbrBaseStQcFwdInPfOctsH, sapEgrEGMbrBaseStQcFwdOutPfPkts, sapEgrEGMbrBaseStQcFwdOutPfPktsL, sapEgrEGMbrBaseStQcFwdOutPfPktsH, sapEgrEGMbrBaseStQcFwdOutPfOcts, sapEgrEGMbrBaseStQcFwdOutPfOctsL, sapEgrEGMbrBaseStQcFwdOutPfOctsH, sapEgrEGMbrBaseStLstClearedTime, sapEgrEGMbrBaseStCustId, sapEgrEGQueueStFwdInPfPkts, sapEgrEGQueueStFwdInPfPktsL, sapEgrEGQueueStFwdInPfPktsH, sapEgrEGQueueStDpdInPfPkts, sapEgrEGQueueStDpdInPfPktsL, sapEgrEGQueueStDpdInPfPktsH, sapEgrEGQueueStFwdOutPfPkts, sapEgrEGQueueStFwdOutPfPktsL, sapEgrEGQueueStFwdOutPfPktsH, sapEgrEGQueueStDpdOutPfPkts, sapEgrEGQueueStDpdOutPfPktsL, sapEgrEGQueueStDpdOutPfPktsH, sapEgrEGQueueStFwdInPfOcts, sapEgrEGQueueStFwdInPfOctsL, sapEgrEGQueueStFwdInPfOctsH, sapEgrEGQueueStDpdInPfOcts, sapEgrEGQueueStDpdInPfOctsL, sapEgrEGQueueStDpdInPfOctsH, sapEgrEGQueueStFwdOutPfOcts, sapEgrEGQueueStFwdOutPfOctsL, sapEgrEGQueueStFwdOutPfOctsH, sapEgrEGQueueStDpdOutPfOcts, sapEgrEGQueueStDpdOutPfOctsL, sapEgrEGQueueStDpdOutPfOctsH, sapEgrEGCustId, sapEgrEGMbrQueueStFwdInPfPkts, sapEgrEGMbrQueueStFwdInPfPktsL, sapEgrEGMbrQueueStFwdInPfPktsH, sapEgrEGMbrQueueStDpdInPfPkts, sapEgrEGMbrQueueStDpdInPfPktsL, sapEgrEGMbrQueueStDpdInPfPktsH, sapEgrEGMbrQueueStFwdOutPfPkts, sapEgrEGMbrQueueStFwdOutPfPktsL, sapEgrEGMbrQueueStFwdOutPfPktsH, sapEgrEGMbrQueueStDpdOutPfPkts, sapEgrEGMbrQueueStDpdOutPfPktsL, sapEgrEGMbrQueueStDpdOutPfPktsH, sapEgrEGMbrQueueStFwdInPfOcts, sapEgrEGMbrQueueStFwdInPfOctsL, sapEgrEGMbrQueueStFwdInPfOctsH, sapEgrEGMbrQueueStDpdInPfOcts, sapEgrEGMbrQueueStDpdInPfOctsL, sapEgrEGMbrQueueStDpdInPfOctsH, sapEgrEGMbrQueueStFwdOutPfOcts, sapEgrEGMbrQueueStFwdOutPfOctsL, sapEgrEGMbrQueueStFwdOutPfOctsH, sapEgrEGMbrQueueStDpdOutPfOcts, sapEgrEGMbrQueueStDpdOutPfOctsL, sapEgrEGMbrQueueStDpdOutPfOctsH, sapEgrEGMbrQueueCustId, sapEgrEGSchedStFwdPkts, sapEgrEGSchedStFwdPktsL, sapEgrEGSchedStFwdPktsH, sapEgrEGSchedStFwdOcts, sapEgrEGSchedStFwdOctsL, sapEgrEGSchedStFwdOctsH, sapEgrEGSchedCustId, sapEgrEGMbrSchedStFwdPkts, sapEgrEGMbrSchedStFwdPktsL, sapEgrEGMbrSchedStFwdPktsH, sapEgrEGMbrSchedStFwdOcts, sapEgrEGMbrSchedStFwdOctsL, sapEgrEGMbrSchedStFwdOctsH, sapEgrEGMbrSchedCustId, sapPortIdEgrEGSchedFwdPkts, sapPortIdEgrEGSchedFwdPktsL, sapPortIdEgrEGSchedFwdPktsH, sapPortIdEgrEGSchedFwdOcts, sapPortIdEgrEGSchedFwdOctsL, sapPortIdEgrEGSchedFwdOctsH, sapPortIdEgrEGSchedCustId, sapPortIdEgrEGMbrSchedFwdPkts, sapPortIdEgrEGMbrSchedFwdPktsL, sapPortIdEgrEGMbrSchedFwdPktsH, sapPortIdEgrEGMbrSchedFwdOcts, sapPortIdEgrEGMbrSchedFwdOctsL, sapPortIdEgrEGMbrSchedFwdOctsH, sapPortIdEgrEGMbrSchedCustId } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP encapsulation group on Nokia SROS series systems in release 9.0." ::= { tmnxSapGroups 155 } tmnxSapStaticHostV9v0Group OBJECT-GROUP OBJECTS { sapStaticHostRowStatus, sapStaticHostSubscrIdent, sapStaticHostSubProfile, sapStaticHostSlaProfile, sapStaticHostShcvOperState, sapStaticHostShcvChecks, sapStaticHostShcvReplies, sapStaticHostShcvReplyTime, sapStaticHostDynMacAddress, sapStaticHostRetailerSvcId, sapStaticHostRetailerIf, sapStaticHostFwdingState, sapStaticHostAncpString, sapStaticHostSubIdIsSapId, sapStaticHostIntermediateDestId, sapStaticHostAdminStatus, sapStaticHostMRtTblLastChgd, sapStaticHostMRtRowStatus, sapStaticHostMRtLastMgmtChange, sapStaticHostMRtStatus } STATUS current DESCRIPTION "The group of objects supporting management of SAP static host capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 156 } tmnxSapSubMgmtV9v0Group OBJECT-GROUP OBJECTS { sapSubMgmtAdminStatus, sapSubMgmtDefSubProfile, sapSubMgmtDefSlaProfile, sapSubMgmtSubIdentPolicy, sapSubMgmtSubscriberLimit, sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubIdent, sapSubMgmtNonSubTrafficSubProf, sapSubMgmtNonSubTrafficSlaProf, sapSubMgmtMacDaHashing, sapSubMgmtDefSubIdent, sapSubMgmtDefSubIdentString, sapSubMgmtDefInterDestId, sapSubMgmtDefInterDestIdString } STATUS current DESCRIPTION "The group of objects supporting management of SAP Sub-management capabilities on Nokia SROS series 9.x systems." ::= { tmnxSapGroups 157 } tmnxSapHsmdaV9v0Group OBJECT-GROUP OBJECTS { sapEgrQosHsmdaQueueMBS, sapEgrQosHsmdaQueueWrrWeight, sapEgressHsmdaWrrPolicyOvr } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Egress QOS Hsmda capabilities on Nokia SROS series systems release 9.0." ::= { tmnxSapGroups 158 } tmnxSapDefHostV9v0Group OBJECT-GROUP OBJECTS { sapDefHostTableLastChanged, sapDefHostLastChanged, sapDefHostRowStatus, sapDefHostNextHopIpv4Addr } STATUS current DESCRIPTION "The group of objects supporting management of Default Host SAP capabilities on Nokia SROS series 9.x systems." ::= { tmnxSapGroups 159 } tmnxSapFilterProfileV9v0Group OBJECT-GROUP OBJECTS { sapStaticHostFilterProfile, sapSubMgmtDefFilterProfile, msapPlcySubMgmtDefFilterProfile } STATUS current DESCRIPTION "The group of objects supporting management of SAP Filter Profiles on Nokia SROS series systems." ::= { tmnxSapGroups 160 } tmnxSapV10v0Group OBJECT-GROUP OBJECTS { sapSiteName, sapTlsDhcpUserDb, sapHostLockoutPolicy, sapTlsAutoLearnMacProtect, tmnxGreTunnelReassembly, tmnxGreTunnelClearDfBit, tmnxGreTunnelIpMtu, sapIngressFPQGrp, sapIngressFPQGrpInstanceId, sapIpv6HostInfoIpoeSLAACHosts } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP general capabilities on release 10.0 of Nokia SROS series systems." ::= { tmnxSapGroups 161 } tmnxSapBsxV10v0Group OBJECT-GROUP OBJECTS { sapAarpId, sapAarpServRefType } STATUS current DESCRIPTION "The group of objects supporting management of BSX (Application Assurance) SAP capabilities on Nokia SROS series systems in release 10.0" ::= { tmnxSapGroups 162 } tmnxSapIgmpTrkV11v0Group OBJECT-GROUP OBJECTS { sapIgmpTrkMaxNbrGrpSrcs } STATUS current DESCRIPTION "The group of objects supporting management of IGMP host tracking capabilities for SAPs on release 11.0 Nokia SROS series systems." ::= { tmnxSapGroups 163 } tmnxSapMsapV11v0Group OBJECT-GROUP OBJECTS { msapPlcyIgmpTrkMaxNbrGrpSrcs } STATUS current DESCRIPTION "The group of objects supporting management of managed SAP capabilities on Nokia SROS series systems added in release 11.0." ::= { tmnxSapGroups 164 } tmnxSapDhcpV11v0Group OBJECT-GROUP OBJECTS { sapTlsDhcpStatsClntProxUDBPckts } STATUS current DESCRIPTION "The group of objects supporting management of SAP TLS DHCP capabilities on Nokia SROS series systems added in release 11.0." ::= { tmnxSapGroups 165 } tmnxSapStaticHostV11v0Group OBJECT-GROUP OBJECTS { sapStaticHostAdminRetailSvcId } STATUS current DESCRIPTION "The group of objects supporting management of SAP static host capabilities on Nokia SROS series systems added in release 11.0." ::= { tmnxSapGroups 166 } tmnxSapNotificationObjV6v0Group OBJECT-GROUP OBJECTS { sapNotifyPortId, svcManagedSapCreationError, msapStatus } STATUS obsolete DESCRIPTION "The group of objects supporting management of notifications on Nokia SROS series systems." ::= { tmnxSapGroups 200 } tmnxSapNotificationObjV7v0Group OBJECT-GROUP OBJECTS { sapNotifyPortId, svcManagedSapCreationError, msapStatus, sapTlsNotifyMacAddr, sapBGPPeeringHostIpAddr, sapBGPPeeringHostIpAddrType, sapBGPPeeringAttrDiscarded, sapBGPPeeringNotifDescription, sapBGPPeeringVRtrID, sapNotifyEncapValue } STATUS current DESCRIPTION "The group of objects supporting management of notifications on Nokia SROS series systems." ::= { tmnxSapGroups 201 } tmnxSapNotifyObjsV8v0R5Group OBJECT-GROUP OBJECTS { sapTunnelNotifyName, sapTunnelNotifyReason, sapTunnelNotifyState } STATUS current DESCRIPTION "The group of objects supporting management of notifications on Nokia SROS series systems." ::= { tmnxSapGroups 202 } tmnxSapNotificationObjV9v0Group OBJECT-GROUP OBJECTS { sapNotifyReason, sapNotifyName, sapPppNcpFailureProtocol } STATUS current DESCRIPTION "The group of notification objects added in release 9.0 of Nokia SROS." ::= { tmnxSapGroups 203 } tmnxSapIpipeNotifyObjsGroup OBJECT-GROUP OBJECTS { sapIpipeCeIpAddrType, sapIpipeCeIpAddress } STATUS current DESCRIPTION "The group of objects supporting management of notifications for Ipipes on Nokia SROS series systems." ::= { tmnxSapGroups 204 } tmnxSapRipNotifyObjsGroup OBJECT-GROUP OBJECTS { sapRipListenerHostIpAddr, sapRipListenerHostIpAddrType, sapRipListenerVRtrID, sapRipListenerNotifDescription } STATUS current DESCRIPTION "The group of objects supporting management of notifications for RIP listener on Nokia SROS series systems." ::= { tmnxSapGroups 205 } tmnxSapDefHostV14v0Group OBJECT-GROUP OBJECTS { sapDefHostExTableLastChanged, sapDefHostExRowStatus, sapDefHostExLastChanged, sapDefHostExNextHopAddrType, sapDefHostExNextHopAddr } STATUS current DESCRIPTION "The group of objects supporting management of Default Host SAP capabilities on Nokia SROS series 14.x systems." ::= { tmnxSapGroups 206 } tmnxSapNotificationObjV13v0Group OBJECT-GROUP OBJECTS { sapNotifyIpAddrType, sapNotifyIpAddr } STATUS current DESCRIPTION "The group of notification objects added in release 13.0 of Nokia SROS." ::= { tmnxSapGroups 207 } tmnxSapObsoletedV6v0Group OBJECT-GROUP OBJECTS { sapTlsDhcpSnooping, sapTlsDhcpLseStateRemainLseTime, sapTlsDhcpLseStateOption82, sapTlsDhcpLseStatePersistKey } STATUS obsolete DESCRIPTION "The group of obsolete objects for the services feature on Nokia SROS series systems." ::= { tmnxSapGroups 300 } tmnxSapObsoletedV7v0Group OBJECT-GROUP OBJECTS { sapTlsDhcpSnooping, sapTlsDhcpLseStateRemainLseTime, sapTlsDhcpLseStateOption82, sapTlsDhcpLseStatePersistKey, sapAntiSpoofIpAddress, sapAntiSpoofMacAddress } STATUS current DESCRIPTION "The group of obsolete objects on Nokia SROS series systems." ::= { tmnxSapGroups 301 } tmnxSapObsoletedV8v0Group OBJECT-GROUP OBJECTS { sapIngQosQMBS, sapEgrQosQMBS } STATUS current DESCRIPTION "The group of obsolete objects on Nokia SROS series systems." ::= { tmnxSapGroups 302 } tmnxSapNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { sapStatusChanged, sapTlsMacAddrLimitAlarmRaised, sapTlsMacAddrLimitAlarmCleared, sapDHCPLeaseEntriesExceeded, sapDHCPLseStateOverride, sapDHCPSuspiciousPcktRcvd, sapDHCPLseStatePopulateErr, hostConnectivityLost, hostConnectivityRestored, sapReceivedProtSrcMac, sapStaticHostDynMacConflict, sapTlsMacMoveExceeded, sapDHCPProxyServerError, sapPortStateChangeProcessed, sapDHCPLseStateMobilityError, msapStateChanged, msapCreationFailure, topologyChangeSapMajorState, newRootSap, topologyChangeSapState, receivedTCN, higherPriorityBridge, sapEncapPVST, sapEncapDot1d, sapActiveProtocolChange, tmnxStpRootGuardViolation, tmnxSapStpExcepCondStateChng, sapHostBGPPeeringSetupFailed } STATUS current DESCRIPTION "The group of notifications for the Sap feature on Nokia SROS series systems." ::= { tmnxSapGroups 400 } tmnxSapCemNotificationV6v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapCemPacketDefectAlarm, sapCemPacketDefectAlarmClear } STATUS current DESCRIPTION "The group of notifications supporting the CEM Sap feature on Nokia 7710 SR series systems." ::= { tmnxSapGroups 401 } tmnxSapObsoletedNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { sapCreated, sapDeleted, sapTlsDHCPLseStEntriesExceeded, sapTlsDHCPLeaseStateOverride, sapTlsDHCPSuspiciousPcktRcvd, sapDHCPCoAError, sapDHCPSubAuthError, bridgedTLS, sapReceiveOwnBpdu } STATUS current DESCRIPTION "The group of obsolete notifications for the Sap feature on Nokia SROS series systems." ::= { tmnxSapGroups 402 } tmnxSapMvrpNotificationV8v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapTlsDataSapInstStatusChgd } STATUS current DESCRIPTION "The group of notifications supporting the MVRP Sap feature on Nokia 7710 SR series systems." ::= { tmnxSapGroups 403 } tmnxSapNotificationV8v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxGreTunnelOperRemIpChg, sapTunnelStateChange } STATUS obsolete DESCRIPTION "The group of notifications supporting the additional SAP feature on Nokia SROS series systems." ::= { tmnxSapGroups 404 } tmnxSapEthCfmGroup OBJECT-GROUP OBJECTS { sapEthCfmTblLastChanged, sapEthCfmRowLastChanged, sapEthCfmTunnelFaultNotification, sapEthCfmMcLagPropHoldTimeRemain, sapEthCfmAisEnable, sapEthCfmVMepFilter } STATUS current DESCRIPTION "The group of objects supporting Ethernet Connectivity Fault Management (CFM) for the SAP feature on Nokia SROS series systems for release 9.0." ::= { tmnxSapGroups 405 } tmnxSapNotificationV9v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapAtmPppSessionFailure, sapAtmPppNcpFailure } STATUS current DESCRIPTION "The group of SAP notifications added in release 9.0 of Nokia SROS series system." ::= { tmnxSapGroups 406 } tmnxSapIpipeNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sapIpipeCeIpAddrChange } STATUS current DESCRIPTION "The group of Ipipe SAP notifications for added in the Nokia SROS series system." ::= { tmnxSapGroups 407 } tmnxSapSpbGroup OBJECT-GROUP OBJECTS { sapTlsSpbAdminState, sapTlsSpbIfIndex, sapTlsSpbLastChgd, sapTlsSpbRowStatus, sapTlsSpbTblLastChanged } STATUS current DESCRIPTION "The group of objects supporting Shortest Path Bridging (SPB) for the SAP feature on Nokia SROS series systems." ::= { tmnxSapGroups 408 } tmnxSapMonitorIPGroup OBJECT-GROUP OBJECTS { sapCpmProtMonitorIP } STATUS current DESCRIPTION "The group of objects supporting per-source, per-SAP IP monitoring on Nokia SROS series release 9.0 systems." ::= { tmnxSapGroups 409 } tmnxSapV11v0Group OBJECT-GROUP OBJECTS { sapTlsDhcp6AdminState, sapTlsDhcp6Description, sapTlsDhcp6Snoop, sapTlsDhcp6InterfaceId, sapTlsDhcp6RemoteId, sapTlsDhcp6RemoteIdString, sapSiteName, sapTlsDhcpUserDb, sapHostLockoutPolicy, sapTlsAutoLearnMacProtect, sapIngressFPQGrp, sapIngressFPQGrpInstanceId, sapIpv6HostInfoIpoeSLAACHosts, sapIgnoreOperDown, sapTlsDhcp6UserDb } STATUS current DESCRIPTION "The group of objects supporting SAP feature on Nokia SROS series release 11.0 systems." ::= { tmnxSapGroups 410 } tmnxSapIpTnlGroup OBJECT-GROUP OBJECTS { tmnxIpTnlDstAddrLastChanged, tmnxIpTnlDstAddrRowStatus, tmnxIpTnlDstAddrTableLastChanged, tmnxIpTunnelAdminState, tmnxIpTunnelBackupRemIpAddr, tmnxIpTunnelBackupRemIpAddrType, tmnxIpTunnelBytesRx, tmnxIpTunnelBytesRxHi, tmnxIpTunnelBytesRxLo, tmnxIpTunnelBytesTx, tmnxIpTunnelBytesTxHi, tmnxIpTunnelBytesTxLo, tmnxIpTunnelClearDfBit, tmnxIpTunnelDeliverySvcId, tmnxIpTunnelDescription, tmnxIpTunnelDscp, tmnxIpTunnelGreHeader, tmnxIpTunnelInvalidChksumRx, tmnxIpTunnelInvalidChksumRxHi, tmnxIpTunnelInvalidChksumRxLo, tmnxIpTunnelIpMtu, tmnxIpTunnelKeyIgnoredRx, tmnxIpTunnelKeyIgnoredRxHi, tmnxIpTunnelKeyIgnoredRxLo, tmnxIpTunnelLastChanged, tmnxIpTunnelLclIpAddr, tmnxIpTunnelLclIpAddrType, tmnxIpTunnelLoopsRx, tmnxIpTunnelLoopsRxHi, tmnxIpTunnelLoopsRxLo, tmnxIpTunnelOperFlags, tmnxIpTunnelOperRemIpAddr, tmnxIpTunnelOperRemIpAddrType, tmnxIpTunnelOperState, tmnxIpTunnelPktsRx, tmnxIpTunnelPktsRxHi, tmnxIpTunnelPktsRxLo, tmnxIpTunnelPktsTx, tmnxIpTunnelPktsTxHi, tmnxIpTunnelPktsTxLo, tmnxIpTunnelReassembly, tmnxIpTunnelRemIpAddr, tmnxIpTunnelRemIpAddrType, tmnxIpTunnelRowStatus, tmnxIpTunnelRxErrors, tmnxIpTunnelSeqIgnoredRx, tmnxIpTunnelSeqIgnoredRxHi, tmnxIpTunnelSeqIgnoredRxLo, tmnxIpTunnelTableLastChanged, tmnxIpTunnelTooBigTx, tmnxIpTunnelTooBigTxHi, tmnxIpTunnelTooBigTxLo, tmnxIpTunnelTxErrors, tmnxIpTunnelVersUnsupRx, tmnxIpTunnelVersUnsupRxHi, tmnxIpTunnelVersUnsupRxLo, tmnxIpTunnelHostISA } STATUS current DESCRIPTION "The group of objects supporting SAP IP Tunnel feature on Nokia SROS series release 10.0 systems." ::= { tmnxSapGroups 411 } tmnxSapGreV10v0Group OBJECT-GROUP OBJECTS { tmnxGreTunnelHostISA } STATUS obsolete DESCRIPTION "The group of additional objects supporting SAP feature on Nokia SROS series release 10.0 systems." ::= { tmnxSapGroups 412 } tmnxSapNotificationV10v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxIpTunnelOperRemIpChg } STATUS current DESCRIPTION "The group of notifications supporting the additional SAP feature on Nokia SROS series systems." ::= { tmnxSapGroups 413 } tmnxSapHsmdaV10v0Group OBJECT-GROUP OBJECTS { sapEgressHsmdaShaperOverride, sapIngressHsmdaPacketOffOvr, sapEgressHsmdaPacketOffOverride, sapEgrQosHsmdaQueueRowStatus, sapEgrQosHsmdaQueueLastChanged, sapEgrQosHsmdaQueueAdminPIR, sapEgrQosHsmdaQueueAdminCIR, sapEgrQosHsmdaQueueSlopePolicy, sapEgrHsmdaQStatCustId, sapEgrHsmdaQStatInProfPktFwd, sapEgrHsmdaQStatInProfPktDropd, sapEgrHsmdaQStatOutProfPktFwd, sapEgrHsmdaQStatOutProfPktDropd, sapEgrHsmdaQStatInProfOctFwd, sapEgrHsmdaQStatInProfOctDropd, sapEgrHsmdaQStatOutProfOctFwd, sapEgrHsmdaQStatOutProfOctDropd, sapEgrHsmdaCntrStCustId, sapEgrHsmdaCntrStInProfPktFwd, sapEgrHsmdaCntrStInProfPktDrop, sapEgrHsmdaCntrStOutProfPktFwd, sapEgrHsmdaCntrStOutProfPktDrop, sapEgrHsmdaCntrStInProfOctFwd, sapEgrHsmdaCntrStInProfOctDrop, sapEgrHsmdaCntrStOutProfOctFwd, sapEgrHsmdaCntrStOutProfOctDrop } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS Hsmda capabilities on Nokia SROS series systems in 10.0 release." ::= { tmnxSapGroups 414 } tmnxSapObsoletedV10v0Group OBJECT-GROUP OBJECTS { sapIngressAggRateLimit, sapIngressHsmdaPacketOffOvr, sapEgrQosHsmdaQueueAdminCIR, sapIngHsmdaQStatCustId, sapIngHsmdaQStatHiPktsDropped, sapIngHsmdaQStatLoPktsDropped, sapIngHsmdaQStatHiOctsDropped, sapIngHsmdaQStatLoOctsDropped, sapIngHsmdaQStatInProfPktsFwd, sapIngHsmdaQStatOutProfPktsFwd, sapIngHsmdaQStatInProfOctsFwd, sapIngHsmdaQStatOutProfOctsFwd, sapIngHsmdaQStatAllPktsOffered, sapIngHsmdaQStatAllOctsOffered, sapIngHsmdaCntrStCustId, sapIngHsmdaCntrStHiPktDrop, sapIngHsmdaCntrStLoPktDrop, sapIngHsmdaCntrStHiOctDrop, sapIngHsmdaCntrStLoOctDrop, sapIngHsmdaCntrStInProfPktFwd, sapIngHsmdaCntrStOutProfPktFwd, sapIngHsmdaCntrStInProfOctFwd, sapIngHsmdaCntrStOutProfOctFwd, sapIngHsmdaCntrStAllPktOffered, sapIngHsmdaCntrStAllOctOffered, sapIngQosHsmdaQueueRowStatus, sapIngQosHsmdaQueueLastChanged, sapIngQosHsmdaQueueAdminPIR, sapIngQosHsmdaQueueAdminCIR, sapIngQosHsmdaQueueSlopePolicy, sapTmplIngressAggRateLimit } STATUS current DESCRIPTION "The group of obsolete objects on Nokia SROS series systems in 10.0 release." ::= { tmnxSapGroups 415 } tmnxSapLagV11v0Group OBJECT-GROUP OBJECTS { sapLagLinkMapProfile, sapExtLastChanged, sapExtLagActivePort, sapExtTableLastChanged, msapPlcyLagLinkMapProfile } STATUS current DESCRIPTION "The group of additional objects supporting SAP LAG feature on Nokia SROS series release 11.0 systems." ::= { tmnxSapGroups 416 } tmnxSapMvrpV10v0Group OBJECT-GROUP OBJECTS { sapTmplLastChanged, sapTmplRowStatus, sapTmplSapCount, sapTmplType, sapTmplTblLastChanged, sapTmplTlsLastChanged, sapTmplTlsMacAgeing, sapTmplTlsTblLastChanged, sapTlsEsVidGrpEndVlanTag, sapTlsEsVidGrpLastChgd, sapTlsEsVidGrpRowStatus, sapTlsEsVidGrpStartVlanTag, sapTlsEsVidGrpTblLastChanged, sapTmplUsed, sapTmplUserCreationOrigin, sapTmplUserCreatorSvcId, sapTmplCollectAcctStats, sapTmplEgrPolicerPolicy, sapTmplEgressAggRateLimit, sapTmplEgressFrameBasedAcctg, sapTmplEgressIpFilterId, sapTmplEgressIpv6FilterId, sapTmplEgressMacFilterId, sapTmplEgressQinQMarkTopOnly, sapTmplEgressQosPolicyId, sapTmplEgressQosSchedulerPolicy, sapTmplIngPolicerPolicy, sapTmplIngUseMultipointShared, sapTmplIngressIpFilterId, sapTmplIngressIpv6FilterId, sapTmplIngressMacFilterId, sapTmplIngressMatchQinQDot1PBits, sapTmplIngressQosPolicyId, sapTmplIngressQosSchedulerPolicy, sapTmplIngressSharedQueuePolicy, sapTmplTlsBpduTranslation, sapTmplTlsDiscardUnknownSource, sapTmplTlsL2ptProtocols, sapTmplTlsL2ptTermination, sapTmplTlsLimitMacMove, sapTmplTlsLimitMacMoveLevel, sapTmplTlsMacAddressLimit, sapTmplTlsMacLearning, sapTmplTlsStpAdminPointToPoint, sapTmplTlsStpAdminStatus, sapTmplTlsStpAutoEdge, sapTmplTlsStpBpduEncap, sapTmplTlsStpPathCost, sapTmplTlsStpPriority, sapTmplTlsStpRapidStart, sapTmplTlsStpRootGuard, sapTmplDot1agCfmMip, sapTmplCpmProtPolicyId, sapTmplCpmProtMonitorMac, sapTlsDataSapInstStatus, sapTlsDataSapInstLastErr, sapTlsMvrpDeclared, sapTlsMvrpEndStation, sapTlsMvrpRegistered, sapTlsMvrpAdminStatus, sapTlsMvrpOperStatus, sapTlsInTcBitBpdus, sapTlsOutTcBitBpdus } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP MVRP capabilities on release 10.0 of Nokia SROS series systems." ::= { tmnxSapGroups 417 } tmnxSapFlowSPecV11v0Group OBJECT-GROUP OBJECTS { sapIngressFlowspec, sapIngressIPv6Flowspec } STATUS current DESCRIPTION "The group of additional objects supporting SAP BGP Flow-Spec feature on Nokia SROS series release 11.0 systems." ::= { tmnxSapGroups 418 } tmnxSapGreObsoletedGroup OBJECT-GROUP OBJECTS { tmnxGreTunnelAdminState, tmnxGreTunnelBackupRemIpAddr, tmnxGreTunnelBackupRemIpAddrType, tmnxGreTunnelOperRemIpAddr, tmnxGreTunnelOperRemIpAddrType, tmnxGreTunnelBytesRx, tmnxGreTunnelBytesRxHi, tmnxGreTunnelBytesRxLo, tmnxGreTunnelBytesTx, tmnxGreTunnelBytesTxHi, tmnxGreTunnelBytesTxLo, tmnxGreTunnelDeliverySvcId, tmnxGreTunnelDescription, tmnxGreTunnelDscp, tmnxGreTunnelLastChanged, tmnxGreTunnelDstIpAddr, tmnxGreTunnelDstIpAddrType, tmnxGreTunnelLclIpAddr, tmnxGreTunnelLclIpAddrType, tmnxGreTunnelOperFlags, tmnxGreTunnelOperState, tmnxGreTunnelPktsRx, tmnxGreTunnelPktsRxHi, tmnxGreTunnelPktsRxLo, tmnxGreTunnelPktsTx, tmnxGreTunnelPktsTxHi, tmnxGreTunnelPktsTxLo, tmnxGreTunnelRemIpAddr, tmnxGreTunnelRemIpAddrType, tmnxGreTunnelRowStatus, tmnxGreTunnelRxErrors, tmnxGreTunnelTableLastChanged, tmnxGreTunnelTxErrors, tmnxGreTunnelInvalidChksumRx, tmnxGreTunnelInvalidChksumRxHi, tmnxGreTunnelInvalidChksumRxLo, tmnxGreTunnelKeyIgnoredRx, tmnxGreTunnelKeyIgnoredRxHi, tmnxGreTunnelKeyIgnoredRxLo, tmnxGreTunnelLoopsRx, tmnxGreTunnelLoopsRxHi, tmnxGreTunnelLoopsRxLo, tmnxGreTunnelSeqIgnoredRx, tmnxGreTunnelSeqIgnoredRxHi, tmnxGreTunnelSeqIgnoredRxLo, tmnxGreTunnelTooBigTx, tmnxGreTunnelTooBigTxHi, tmnxGreTunnelTooBigTxLo, tmnxGreTunnelVersUnsupRx, tmnxGreTunnelVersUnsupRxHi, tmnxGreTunnelVersUnsupRxLo, tmnxGreTunnelClearDfBit, tmnxGreTunnelHostISA, tmnxGreTunnelIpMtu, tmnxGreTunnelReassembly } STATUS current DESCRIPTION "The group of obsoleted objects supporting management of SAP GRE specific capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 419 } tmnxSapGreV11v0Group OBJECT-GROUP OBJECTS { tmnxSapGreTunnelCount } STATUS current DESCRIPTION "The group of objects supporting management of SAP GRE specific capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 420 } tmnxSapNotifObsoletedGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxGreTunnelOperRemIpChg } STATUS current DESCRIPTION "The group of obsoleted notifications supporting the additional SAP feature on Nokia SROS series systems." ::= { tmnxSapGroups 421 } tmnxSapNotificationV11v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapTunnelStateChange, tmnxIpTunnelOperStateChange } STATUS current DESCRIPTION "The group of notifications supporting additional SAP features on Nokia SROS series systems release 11.0." ::= { tmnxSapGroups 422 } tmnxSapStatsV10v0Group OBJECT-GROUP OBJECTS { sapBaseStatsIngressCPMPackets, sapBaseStatsIngressCPMPacketsHi, sapBaseStatsIngressCPMPacketsLo, sapBaseStatsIngressCPMOctets, sapBaseStatsIngressCPMOctetsHi, sapBaseStatsIngressCPMOctetsLo } STATUS current DESCRIPTION "The group of additional objects supporting SAP stats feature on Nokia SROS series release 10.0 systems." ::= { tmnxSapGroups 423 } tmnxSapDCpuProtV11v0Group OBJECT-GROUP OBJECTS { sapDCpuProtPolicy, msapPlcyDCpuProtPolicy, sapDcpFpStaticState, sapDcpFpStaticExcdCount, sapDcpFpStaticExcdCountHi, sapDcpFpStaticExcdCountLo, sapDcpFpStaticHoldDown, sapDcpFpStaticDetectionTime, sapDcpFpDynState, sapDcpFpDynExcdCount, sapDcpFpDynExcdCountHi, sapDcpFpDynExcdCountLo, sapDcpFpDynHoldDown, sapDcpFpDynDetectionTime, sapDcpFpDynAllocated, sapDcpFpLocMonState, sapDcpFpLocMonExcdCount, sapDcpFpLocMonExcdCountHi, sapDcpFpLocMonExcdCountLo, sapDcpFpLocMonAllDynAlloc } STATUS current DESCRIPTION "The group of additional objects supporting Distributed Cpu Protection feature for SAP on Nokia SROS series release 11.0 systems." ::= { tmnxSapGroups 424 } tmnxSapEgrPortQGrpV11v0Group OBJECT-GROUP OBJECTS { sapEgressPortQGrp, sapEgressPortQGrpInstanceId } STATUS current DESCRIPTION "The group of additional objects supporting egress port queue-group feature for SAP on Nokia SROS series release 11.0 systems." ::= { tmnxSapGroups 425 } tmnxSapDcpNotifyObjsV11v0Group OBJECT-GROUP OBJECTS { sapDcpTimeEventOccured } STATUS current DESCRIPTION "The group of objects supporting management of Distributed CPU Protection feature for SAP on Nokia SROS series release 11.0 systems." ::= { tmnxSapGroups 426 } tmnxSapDcpNotifyV11v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapTlsMacMoveExceedNonBlock, sapDcpStaticExcd, sapDcpDynamicExcd, sapDcpStaticHoldDownStart, sapDcpDynamicHoldDownStart, sapDcpStaticHoldDownEnd, sapDcpDynamicHoldDownEnd, sapDcpStaticConform, sapDcpDynamicConform, sapDcpLocMonExcd, sapDcpLocMonExcdDynResource, sapDcpLocMonExcdAllDynAlloc, sapDcpLocMonExcdAllDynFreed, sapDcpDynamicEnforceAlloc, sapDcpDynamicEnforceFreed } STATUS current DESCRIPTION "The group of notifications supporting management of Distributed CPU Protection feature for SAP on Nokia SROS series release 11.0 systems." ::= { tmnxSapGroups 427 } tmnxSapSchedulerRateV11v0Group OBJECT-GROUP OBJECTS { sapIngQosSPIRHi, sapIngQosSPIRLo, sapIngQosSCIRHi, sapIngQosSCIRLo, sapEgrQosSPIRHi, sapEgrQosSPIRLo, sapEgrQosSCIRHi, sapEgrQosSCIRLo } STATUS current DESCRIPTION "The group of objects supporting management of Scheduler policies on Nokia SROS series systems release 11.0." ::= { tmnxSapGroups 428 } tmnxSapSpbV11v0Group OBJECT-GROUP OBJECTS { sapTlsStaticIsidStatus, sapTlsStaticIsidRngRowStatus, sapTlsStaticIsidRngLastChanged, sapTlsStaticIsidRngLow, sapTlsStaticIsidRngHigh } STATUS current DESCRIPTION "The group of objects supporting management of SPB feature on Nokia SROS series systems release 11.0." ::= { tmnxSapGroups 429 } tmnxSapEthLoopbackV11v0Group OBJECT-GROUP OBJECTS { sapEthLoopbackRowStatus, sapEthLoopbackMode, sapEthLoopbackMacSwap, sapEthLoopbackMacSwapAddr, sapEthLoopbackMacSwapAddrAll } STATUS current DESCRIPTION "The group of objects supporting management of the SAP Ethernet Loopback feature on Nokia SROS series systems in release 11.0." ::= { tmnxSapGroups 430 } tmnxSapEthLpbkNotifyV11v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapEthLoopbackStarted, sapEthLoopbackStopped } STATUS current DESCRIPTION "The group of notifications supporting management of the SAP Ethernet Loopback feature on Nokia SROS series systems in release 11.0." ::= { tmnxSapGroups 431 } tmnxSapQosV11v0Group OBJECT-GROUP OBJECTS { sapIngQosQueueId, sapIngQosQueueStatsOfferedHiPrioPackets, sapIngQosQueueStatsDroppedHiPrioPackets, sapIngQosQueueStatsOfferedLoPrioPackets, sapIngQosQueueStatsDroppedLoPrioPackets, sapIngQosQueueStatsOfferedHiPrioOctets, sapIngQosQueueStatsDroppedHiPrioOctets, sapIngQosQueueStatsOfferedLoPrioOctets, sapIngQosQueueStatsDroppedLoPrioOctets, sapIngQosQueueStatsForwardedInProfPackets, sapIngQosQueueStatsForwardedOutProfPackets, sapIngQosQueueStatsForwardedInProfOctets, sapIngQosQueueStatsForwardedOutProfOctets, sapIngQosCustId, sapIngQosQueueStatsUncoloredPacketsOffered, sapIngQosQueueStatsUncoloredOctetsOffered, sapEgrQosQueueId, sapEgrQosQueueStatsForwardedInProfPackets, sapEgrQosQueueStatsDroppedInProfPackets, sapEgrQosQueueStatsForwardedOutProfPackets, sapEgrQosQueueStatsDroppedOutProfPackets, sapEgrQosQueueStatsForwardedInProfOctets, sapEgrQosQueueStatsDroppedInProfOctets, sapEgrQosQueueStatsForwardedOutProfOctets, sapEgrQosQueueStatsDroppedOutProfOctets, sapEgrQosCustId, sapIngQosSchedStatsForwardedPackets, sapIngQosSchedStatsForwardedOctets, sapIngQosSchedCustId, sapEgrQosSchedStatsForwardedPackets, sapEgrQosSchedStatsForwardedOctets, sapEgrQosSchedCustId, sapIngQosQRowStatus, sapIngQosQLastMgmtChange, sapIngQosQOverrideFlags, sapIngQosQCBS, sapIngQosQHiPrioOnly, sapIngQosQCIRAdaptation, sapIngQosQPIRAdaptation, sapIngQosQAdminPIR, sapIngQosQAdminCIR, sapEgrQosQRowStatus, sapEgrQosQLastMgmtChange, sapEgrQosQOverrideFlags, sapEgrQosQCBS, sapEgrQosQHiPrioOnly, sapEgrQosQCIRAdaptation, sapEgrQosQPIRAdaptation, sapEgrQosQAdminPIR, sapEgrQosQAdminCIR, sapEgrQosQAvgOverhead, sapIngQosSRowStatus, sapIngQosSLastMgmtChange, sapIngQosSOverrideFlags, sapIngQosSSummedCIR, sapEgrQosSRowStatus, sapEgrQosSLastMgmtChange, sapEgrQosSOverrideFlags, sapEgrQosSSummedCIR, sapIngQosPStatsCustId, sapIngQosPStatsMode, sapIngQosPStatsOffHiPrioPkts, sapIngQosPStatsOffHiPrioPktsLo, sapIngQosPStatsOffHiPrioPktsHi, sapIngQosPStatsDrpHiPrioPkts, sapIngQosPStatsDrpHiPrioPktsLo, sapIngQosPStatsDrpHiPrioPktsHi, sapIngQosPStatsOffLoPrioPkts, sapIngQosPStatsOffLoPrioPktsLo, sapIngQosPStatsOffLoPrioPktsHi, sapIngQosPStatsDrpLoPrioPkts, sapIngQosPStatsDrpLoPrioPktsLo, sapIngQosPStatsDrpLoPrioPktsHi, sapIngQosPStatsOffHiPrioOcts, sapIngQosPStatsOffHiPrioOctsLo, sapIngQosPStatsOffHiPrioOctsHi, sapIngQosPStatsDrpHiPrioOcts, sapIngQosPStatsDrpHiPrioOctsLo, sapIngQosPStatsDrpHiPrioOctsHi, sapIngQosPStatsOffLoPrioOcts, sapIngQosPStatsOffLoPrioOctsLo, sapIngQosPStatsOffLoPrioOctsHi, sapIngQosPStatsDrpLoPrioOcts, sapIngQosPStatsDrpLoPrioOctsLo, sapIngQosPStatsDrpLoPrioOctsHi, sapIngQosPStatsFwdInProfPkts, sapIngQosPStatsFwdInProfPktsLo, sapIngQosPStatsFwdInProfPktsHi, sapIngQosPStatsFwdOutProfPkts, sapIngQosPStatsFwdOutProfPktsLo, sapIngQosPStatsFwdOutProfPktsHi, sapIngQosPStatsFwdInProfOcts, sapIngQosPStatsFwdInProfOctsLo, sapIngQosPStatsFwdInProfOctsHi, sapIngQosPStatsFwdOutProfOcts, sapIngQosPStatsFwdOutProfOctsLo, sapIngQosPStatsFwdOutProfOctsHi, sapIngQosPStatsUncolPktsOff, sapIngQosPStatsUncolPktsOffLo, sapIngQosPStatsUncolPktsOffHi, sapIngQosPStatsUncolOctsOff, sapIngQosPStatsUncolOctsOffLo, sapIngQosPStatsUncolOctsOffHi, sapEgrQosPStatsCustId, sapEgrQosPStatsMode, sapEgrQosPStatsOffInProfPkts, sapEgrQosPStatsOffInProfPktsLo, sapEgrQosPStatsOffInProfPktsHi, sapEgrQosPStatsFwdInProfPkts, sapEgrQosPStatsFwdInProfPktsLo, sapEgrQosPStatsFwdInProfPktsHi, sapEgrQosPStatsDrpInProfPkts, sapEgrQosPStatsDrpInProfPktsLo, sapEgrQosPStatsDrpInProfPktsHi, sapEgrQosPStatsOffOutProfPkts, sapEgrQosPStatsOffOutProfPktsLo, sapEgrQosPStatsOffOutProfPktsHi, sapEgrQosPStatsFwdOutProfPkts, sapEgrQosPStatsFwdOutProfPktsLo, sapEgrQosPStatsFwdOutProfPktsHi, sapEgrQosPStatsDrpOutProfPkts, sapEgrQosPStatsDrpOutProfPktsLo, sapEgrQosPStatsDrpOutProfPktsHi, sapEgrQosPStatsOffInProfOcts, sapEgrQosPStatsOffInProfOctsLo, sapEgrQosPStatsOffInProfOctsHi, sapEgrQosPStatsFwdInProfOcts, sapEgrQosPStatsFwdInProfOctsLo, sapEgrQosPStatsFwdInProfOctsHi, sapEgrQosPStatsDrpInProfOcts, sapEgrQosPStatsDrpInProfOctsLo, sapEgrQosPStatsDrpInProfOctsHi, sapEgrQosPStatsOffOutProfOcts, sapEgrQosPStatsOffOutProfOctsLo, sapEgrQosPStatsOffOutProfOctsHi, sapEgrQosPStatsFwdOutProfOcts, sapEgrQosPStatsFwdOutProfOctsLo, sapEgrQosPStatsFwdOutProfOctsHi, sapEgrQosPStatsDrpOutProfOcts, sapEgrQosPStatsDrpOutProfOctsLo, sapEgrQosPStatsDrpOutProfOctsHi, sapEgrQosPStatsUncolPktsOff, sapEgrQosPStatsUncolPktsOffLo, sapEgrQosPStatsUncolPktsOffHi, sapEgrQosPStatsUncolOctsOff, sapEgrQosPStatsUncolOctsOffLo, sapEgrQosPStatsUncolOctsOffHi, sapIgQosPlcyPStatCustId, sapIgQosPlcyPStatMode, sapIgQosPlcyPStatOffHiPrioPkts, sapIgQosPlcyPStatDrpHiPrioPkts, sapIgQosPlcyPStatOffLoPrioPkts, sapIgQosPlcyPStatDrpLoPrioPkts, sapIgQosPlcyPStatOffHiPrioOcts, sapIgQosPlcyPStatDrpHiPrioOcts, sapIgQosPlcyPStatOffLoPrioOcts, sapIgQosPlcyPStatDrpLoPrioOcts, sapIgQosPlcyPStatFwdInProfPkts, sapIgQosPlcyPStatFwdOutProfPkts, sapIgQosPlcyPStatFwdInProfOcts, sapIgQosPlcyPStatFwdOutProfOcts, sapIgQosPlcyPStatUncolPktsOff, sapIgQosPlcyPStatUncolOctsOff, sapIgQosPlcyPStatOffHiPrioPkts, sapIgQosPlcyPStatOffHiPrioPktsL, sapIgQosPlcyPStatOffHiPrioPktsH, sapIgQosPlcyPStatDrpHiPrioPkts, sapIgQosPlcyPStatDrpHiPrioPktsL, sapIgQosPlcyPStatDrpHiPrioPktsH, sapIgQosPlcyPStatOffLoPrioPkts, sapIgQosPlcyPStatOffLoPrioPktsL, sapIgQosPlcyPStatOffLoPrioPktsH, sapIgQosPlcyPStatDrpLoPrioPkts, sapIgQosPlcyPStatDrpLoPrioPktsL, sapIgQosPlcyPStatDrpLoPrioPktsH, sapIgQosPlcyPStatOffHiPrioOcts, sapIgQosPlcyPStatOffHiPrioOctsL, sapIgQosPlcyPStatOffHiPrioOctsH, sapIgQosPlcyPStatDrpHiPrioOcts, sapIgQosPlcyPStatDrpHiPrioOctsL, sapIgQosPlcyPStatDrpHiPrioOctsH, sapIgQosPlcyPStatOffLoPrioOcts, sapIgQosPlcyPStatOffLoPrioOctsL, sapIgQosPlcyPStatOffLoPrioOctsH, sapIgQosPlcyPStatDrpLoPrioOcts, sapIgQosPlcyPStatDrpLoPrioOctsL, sapIgQosPlcyPStatDrpLoPrioOctsH, sapIgQosPlcyPStatFwdInProfPkts, sapIgQosPlcyPStatFwdInProfPktsL, sapIgQosPlcyPStatFwdInProfPktsH, sapIgQosPlcyPStatFwdOutProfPkts, sapIgQosPlcyPStatFwdOutProfPktsL, sapIgQosPlcyPStatFwdOutProfPktsH, sapIgQosPlcyPStatFwdInProfOcts, sapIgQosPlcyPStatFwdInProfOctsL, sapIgQosPlcyPStatFwdInProfOctsH, sapIgQosPlcyPStatFwdOutProfOcts, sapIgQosPlcyPStatFwdOutProfOctsL, sapIgQosPlcyPStatFwdOutProfOctsH, sapIgQosPlcyPStatUncolPktsOff, sapIgQosPlcyPStatUncolPktsOffL, sapIgQosPlcyPStatUncolPktsOffH, sapIgQosPlcyPStatUncolOctsOff, sapIgQosPlcyPStatUncolOctsOffL, sapIgQosPlcyPStatUncolOctsOffH, sapEgQosPlcyPStatCustId, sapEgQosPlcyPStatMode, sapEgQosPlcyPStatOffInProfPkts, sapEgQosPlcyPStatOffInProfPktsL, sapEgQosPlcyPStatOffInProfPktsH, sapEgQosPlcyPStatFwdInProfPkts, sapEgQosPlcyPStatFwdInProfPktsL, sapEgQosPlcyPStatFwdInProfPktsH, sapEgQosPlcyPStatDrpInProfPkts, sapEgQosPlcyPStatDrpInProfPktsL, sapEgQosPlcyPStatDrpInProfPktsH, sapEgQosPlcyPStatOffOutProfPkts, sapEgQosPlcyPStatOffOutProfPktsL, sapEgQosPlcyPStatOffOutProfPktsH, sapEgQosPlcyPStatFwdOutProfPkts, sapEgQosPlcyPStatFwdOutProfPktsL, sapEgQosPlcyPStatFwdOutProfPktsH, sapEgQosPlcyPStatDrpOutProfPkts, sapEgQosPlcyPStatDrpOutProfPktsL, sapEgQosPlcyPStatDrpOutProfPktsH, sapEgQosPlcyPStatOffInProfOcts, sapEgQosPlcyPStatOffInProfOctsL, sapEgQosPlcyPStatOffInProfOctsH, sapEgQosPlcyPStatFwdInProfOcts, sapEgQosPlcyPStatFwdInProfOctsL, sapEgQosPlcyPStatFwdInProfOctsH, sapEgQosPlcyPStatDrpInProfOcts, sapEgQosPlcyPStatDrpInProfOctsL, sapEgQosPlcyPStatDrpInProfOctsH, sapEgQosPlcyPStatOffOutProfOcts, sapEgQosPlcyPStatOffOutProfOctsL, sapEgQosPlcyPStatOffOutProfOctsH, sapEgQosPlcyPStatFwdOutProfOcts, sapEgQosPlcyPStatFwdOutProfOctsL, sapEgQosPlcyPStatFwdOutProfOctsH, sapEgQosPlcyPStatDrpOutProfOcts, sapEgQosPlcyPStatDrpOutProfOctsL, sapEgQosPlcyPStatDrpOutProfOctsH, sapEgrQosArbitStatsFwdOcts, sapEgrQosArbitStatsFwdOctsHi, sapEgrQosArbitStatsFwdOctsLo, sapEgrQosArbitStatsFwdPkts, sapEgrQosArbitStatsFwdPktsHi, sapEgrQosArbitStatsFwdPktsLo, sapIngQosArbitStatsFwdOcts, sapIngQosArbitStatsFwdOctsHi, sapIngQosArbitStatsFwdOctsLo, sapIngQosArbitStatsFwdPkts, sapIngQosArbitStatsFwdPktsHi, sapIngQosArbitStatsFwdPktsLo, sapPortIdEgrQosArbitFwdOcts, sapPortIdEgrQosArbitFwdOctsHi, sapPortIdEgrQosArbitFwdOctsLo, sapPortIdEgrQosArbitFwdPkts, sapPortIdEgrQosArbitFwdPktsHi, sapPortIdEgrQosArbitFwdPktsLo, sapPortIdIngQosArbitFwdOcts, sapPortIdIngQosArbitFwdOctsHi, sapPortIdIngQosArbitFwdOctsLo, sapPortIdIngQosArbitFwdPkts, sapPortIdIngQosArbitFwdPktsHi, sapPortIdIngQosArbitFwdPktsLo } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 432 } tmnxSapQosObsoletedV11v0Group OBJECT-GROUP OBJECTS { sapIngQosSPIR, sapIngQosSCIR, sapEgrQosSPIR, sapEgrQosSCIR } STATUS current DESCRIPTION "The group of objects obsoleted supporting management of SAP Ingress/Egress QoS capabilities on Nokia SROS series systems release 11.0." ::= { tmnxSapGroups 433 } tmnxSapCflowdGroupV11v0 OBJECT-GROUP OBJECTS { sapCflowd } STATUS current DESCRIPTION "The group of additional objects for the management of Cflowd sampling on SAPs for release 11.0 of the SROS series systems." ::= { tmnxSapGroups 435 } sapTlsFdbMacStatsGroup OBJECT-GROUP OBJECTS { sapTlsFdbMacStatsNumEntries } STATUS current DESCRIPTION "The group of additional objects for the management of Cflowd sampling on SAPs for release 11.0 of the SROS series systems." ::= { tmnxSapGroups 436 } sapTlsEtreeGroup OBJECT-GROUP OBJECTS { sapEtreeRootLeafTag, sapEtreeLeafTag, sapEtreeLeafAc } STATUS current DESCRIPTION "The group of objects supporting ETree feature for SAPs on Nokia SROS series systems." ::= { tmnxSapGroups 437 } tmnxMsapPlcyCpmProtV12v0Group OBJECT-GROUP OBJECTS { msapPlcyCpmProtMonitorIP } STATUS current DESCRIPTION "The group of objects supporting management of CPM Protection on MSAP Policy for release 12.0 of the SROS series systems." ::= { tmnxSapGroups 438 } tmnxSapTlsV12v0Group OBJECT-GROUP OBJECTS { tmnxSapTlsExLastChanged, tmnxSapTlsExDhcpPythonPolicy, tmnxSapTlsExDhcp6PythonPolicy, tmnxSapTlsExRtrSolMsapTrigger, tmnxSapTlsExRtrSolUserDb } STATUS current DESCRIPTION "The group of new objects supporting management of SAPS for release 12.0 of the SROS series systems." ::= { tmnxSapGroups 439 } tmnxSapQosV12v0Group OBJECT-GROUP OBJECTS { sapEgressAggRateLUB, sapEgrEncapGroupAggRateLUB, sapTmplEgrAggRateLUB } STATUS current DESCRIPTION "The group of objects supporting management of SAP QoS capabilities for release 12.0 on Nokia SROS series systems." ::= { tmnxSapGroups 440 } tmnxSapEthCfmV12v0Group OBJECT-GROUP OBJECTS { sapEthCfmSquelchIngress, sapTmplEthCfmSquelchIngress, sapEthCfmCollectLmmStats } STATUS current DESCRIPTION "The group of additional objects supporting Ethernet Connectivity Fault Management (ETH-CFM) for the SAP feature on Nokia SROS series systems for release 12.0." ::= { tmnxSapGroups 441 } tmnxIpTunnelV12v0Group OBJECT-GROUP OBJECTS { tmnxIpTunnelEncapIpMtu, tmnxIpTunnelIcmp6Pkt2Big, tmnxIpTunnelIcmp6NumPkt2Big, tmnxIpTunnelIcmp6Pkt2BigTime, tmnxIpTnlDstAddrResolved } STATUS current DESCRIPTION "The group of objects for IP Tunnel feature on Nokia SROS series systems in 12.0 release." ::= { tmnxSapGroups 442 } tmnxIPTunnelPMTUV21v0Group OBJECT-GROUP OBJECTS { tmnxIpTunnelPropagateIpv6PMTU, tmnxIpTunnelPropagateIpv4PMTU, tmnxIpTunnelIcmpFragReq, tmnxIpTunnelIcmpFragReqNum, tmnxIpTunnelIcmpFragReqTime, tmnxIpTunnelPMTUDiscoverAging, tmnxIpTunnelTempPrivMtu } STATUS current DESCRIPTION "The group of objects for IP Tunnel PMTU feature on Nokia SROS series systems in 21.0 release." ::= { tmnxSapGroups 443 } sapLagV12v0Group OBJECT-GROUP OBJECTS { sapLagPerLinkHashClass, sapLagPerLinkHashWeight, sapLagPerLinkHashOperClass, sapLagPerLinkHashOperWeight, sapLagPerLinkHashIsOverriden, sapLagPerLinkHashLastChanged, sapLagPerLinkHashTableLastChgd } STATUS current DESCRIPTION "The group of objects for SAP per-link-hash feature on Nokia SROS series systems in 12.0 release." ::= { tmnxSapGroups 444 } tmnxIPTunnelGreKeyV12v0Group OBJECT-GROUP OBJECTS { tmnxIpTunnelGreHeaderSendKey, tmnxIpTunnelGreHeaderRcvKey, tmnxIpTunnelGreHeaderKeysSet, tmnxIpTunnelKeyMismatchRx } STATUS current DESCRIPTION "The group of objects for SAP gre key feature on Nokia SROS series systems in 12.0 release." ::= { tmnxSapGroups 445 } tmnxIpTunnelFragStatV12v0Group OBJECT-GROUP OBJECTS { tmnxIpTunnelEncapOverhead, tmnxIpTunnelPreEncapFragCount, tmnxIpTunnelPreEncapFragLastSize, tmnxIpTunnelPostEncapFragCount, tmnxIpTunnelPostEncapFragLstSize } STATUS current DESCRIPTION "The group of objects for fragmentation statistics for Gre IP-in-IP tunnel feature on Nokia SROS series systems in 12.0 release." ::= { tmnxSapGroups 446 } tmnxIpTunnelEncapNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { sapTunnelEncapIpMtuTooSmall } STATUS current DESCRIPTION "The group of notifications supporting Gre/IP-in-IP Tunnels encapsulation feature on Nokia SROS series systems in release 12.0." ::= { tmnxSapGroups 447 } tmnxIpTunnelEncaNotifyObjsGroup OBJECT-GROUP OBJECTS { sapTunnelNotifyConfigIpMtu, sapTunnelNotifyEncapOverhead, sapTunnelNotifyConfigEncapIpMtu } STATUS current DESCRIPTION "The group of objects for Gre IP-in-IP tunnel encapsulation trap on Nokia SROS series systems in 12.0 release." ::= { tmnxSapGroups 448 } tmnxSapPbbV12v0Group OBJECT-GROUP OBJECTS { sapPbbMldSnpgMRouter } STATUS current DESCRIPTION "The group of objects supporting management of Provider Backbone Bridging (PBB/IEEE 802.1ah) capabilities for SAPs on Nokia SROS series systems in 12.0 release." ::= { tmnxSapGroups 449 } tmnxMsapQosV12v0Group OBJECT-GROUP OBJECTS { msapTlsPlcyIngQosPolicyId, msapTlsPlcyIngQosQueueingType, msapL3PlcyIngQosPolicyId, msapL3PlcyIngQosQueueingType } STATUS current DESCRIPTION "The group of objects supporting management of MSAP QoS capabilities for release 12.0 on Nokia SROS series systems." ::= { tmnxSapGroups 450 } tmnxIpTnlOperChgGroup OBJECT-GROUP OBJECTS { tmnxIpTunnelOperChanged } STATUS current DESCRIPTION "The group of objects for new statistics of outbound SA feature on Nokia SROS series systems in 10.0 release." ::= { tmnxSapGroups 451 } tmnxSapMsapV12v0Group OBJECT-GROUP OBJECTS { msapTlsPlcyIgmpSnpgMcacUsePortWt } STATUS current DESCRIPTION "The group of objects supporting management of MSAP added in release 12.0 on Nokia SROS series systems." ::= { tmnxSapGroups 452 } tmnxSapIpoeV13v0Group OBJECT-GROUP OBJECTS { tmnxSapIpoeTableLastChanged, tmnxSapIpoeLastChanged, tmnxSapIpoeAdminState, tmnxSapIpoeDescription, tmnxSapIpoePolicy, tmnxSapIpoeUserDb } STATUS current DESCRIPTION "The group of objects supporting management of IPoE session on SAP added in release 13.0 on Nokia SROS series systems." ::= { tmnxSapGroups 453 } tmnxSapStatHost6Group OBJECT-GROUP OBJECTS { sapStatHostMacLearnOptions, sapStatHost6TableLastChanged, sapStatHost6LastChanged, sapStatHost6RowStatus, sapStatHost6AdminStatus, sapStatHost6PrefixLen, sapStatHost6NextHopAddrType, sapStatHost6NextHopAddr, sapStatHost6SubscrIdent, sapStatHost6SubProfile, sapStatHost6SlaProfile, sapStatHost6ShcvOperState, sapStatHost6ShcvChecks, sapStatHost6ShcvReplies, sapStatHost6ShcvReplyTime, sapStatHost6DynMacAddress, sapStatHost6RetailerSvcId, sapStatHost6RetailerIf, sapStatHost6FwdingState, sapStatHost6AncpString, sapStatHost6SubIdIsSapId, sapStatHost6AppProfile, sapStatHost6IntermediateDestId, sapStatHost6MRtTblLastChgd, sapStatHost6MRtRowStatus, sapStatHost6MRtLastMgmtChange, sapStatHost6MRtStatus, sapStatHost6MRtMetric, sapIpv6HostInfoStaticHostsUp, tmnxSapDataTrigStatsName, tmnxSapDataTrigStatsVal } STATUS current DESCRIPTION "The group of objects supporting management of static IPv6 hosts on Nokia SROS series systems." ::= { tmnxSapGroups 454 } tmnxSapDnGroup OBJECT-GROUP OBJECTS { tmnxSapTlsExProcCpmTrfcSapDn } STATUS current DESCRIPTION "The tmnxSapDnGroup maintains additional vpls sap information on Nokia SROS series systems." ::= { tmnxSapGroups 455 } tmnxSapQosSchedV13v0Group OBJECT-GROUP OBJECTS { sapIngQosSParentWeight, sapIngQosSParentCIRWeight, sapEgrQosSParentWeight, sapEgrQosSParentCIRWeight } STATUS current DESCRIPTION "The group of objects supporting management of Qos scheduler overrides on SAP for release 13.0 on Nokia SROS series systems." ::= { tmnxSapGroups 456 } tmnxSapIpipeFaultPropGroup OBJECT-GROUP OBJECTS { sapIpipeLegacyFaultNotification, sapIpipeRemainRecoveryTimer } STATUS current DESCRIPTION "The group of objects supporting management of IPIPE fault propagation on SAP for release 13.0 on Nokia SROS series systems." ::= { tmnxSapGroups 457 } tmnxSapStaticHostRipV13v0Group OBJECT-GROUP OBJECTS { sapStaticHostRipPolicy, sapStaticHostRipPlcyName, sapStaticHostRipListenerStatus } STATUS current DESCRIPTION "The group of objects supporting management of SAP static host RIP/RIP-NG policies on Nokia SROS series systems added in release 13.0." ::= { tmnxSapGroups 458 } tmnxSapBaseStatsV13v0Group OBJECT-GROUP OBJECTS { sapBaseStatsIngPchipRcvdValidPkt, sapBaseStatsIngPchipRcvdValidOct } STATUS current DESCRIPTION "The group of objects supporting management of SAP base statistics on Nokia SROS series systems release 13.0." ::= { tmnxSapGroups 459 } tmnxSapQueueOvrV13v0Group OBJECT-GROUP OBJECTS { sapIngQosQMonitorDepth, sapEgrQosQMonitorDepth, sapIngQosQueueDepthPollPrcnt1, sapIngQosQueueDepthPollPrcnt2, sapIngQosQueueDepthPollPrcnt3, sapIngQosQueueDepthPollPrcnt4, sapIngQosQueueDepthPollPrcnt5, sapIngQosQueueDepthPollPrcnt6, sapIngQosQueueDepthPollPrcnt7, sapIngQosQueueDepthPollPrcnt8, sapIngQosQueueDepthPollPrcnt9, sapIngQosQueueDepthPollPrcnt10, sapIngQosQueueDepthAvgPollInt, sapIngQosQueueDepthAvgElpsdTme, sapEgrQosQueueDepthPollPrcnt1, sapEgrQosQueueDepthPollPrcnt2, sapEgrQosQueueDepthPollPrcnt3, sapEgrQosQueueDepthPollPrcnt4, sapEgrQosQueueDepthPollPrcnt5, sapEgrQosQueueDepthPollPrcnt6, sapEgrQosQueueDepthPollPrcnt7, sapEgrQosQueueDepthPollPrcnt8, sapEgrQosQueueDepthPollPrcnt9, sapEgrQosQueueDepthPollPrcnt10, sapEgrQosQueueDepthAvgPollInt, sapEgrQosQueueDepthAvgElpsdTme } STATUS obsolete DESCRIPTION "The group of objects supporting QoS queue-overrides on SAP in release 13.0 of Nokia SROS series systems." ::= { tmnxSapGroups 460 } tmnxSapStatHost6V13v0Group OBJECT-GROUP OBJECTS { sapStatHost6AdminRetailSvcId } STATUS current DESCRIPTION "The group of objects supporting management of static IPv6 hosts on release 13.0 Nokia SROS series systems." ::= { tmnxSapGroups 462 } tmnxSapDiamNasreqGroup OBJECT-GROUP OBJECTS { tmnxSapTlsExDiameterAuthPolicy } STATUS current DESCRIPTION "The group of objects supporting management of static IPv6 hosts on release 13.0 Nokia SROS series systems." ::= { tmnxSapGroups 463 } tmnxSapRipNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { sapHostRipListenerSetupFailed } STATUS current DESCRIPTION "The group of notifications for the Rip Listener feature on Nokia SROS series systems." ::= { tmnxSapGroups 464 } tmnxSapQosRateV13v0Group OBJECT-GROUP OBJECTS { sapEgressAggRateLmt, sapTmplEgrAggRateLimit, sapEgrEncapGrpAggRateLimit } STATUS current DESCRIPTION "The group of objects supporting management of SAP QoS capabilities for release 13.0 on Nokia SROS series systems." ::= { tmnxSapGroups 465 } tmnxSapDhcpV13v0Group OBJECT-GROUP OBJECTS { sapTlsDhcpStatsClntProxNqPckts, sapTlsDhcpRemoteIdHex, sapTlsDhcpCircuitIdHex } STATUS current DESCRIPTION "The group of objects supporting management of SAP TLS DHCP capabilities on Nokia SROS series systems added in release 13.0." ::= { tmnxSapGroups 466 } tmnxSapShcvPolicyGroup OBJECT-GROUP OBJECTS { sapTlsShcvPolicyIpv4 } STATUS current DESCRIPTION "The group of objects supporting management of Subscriber Host Connectivity Verification (SHCV) policies on Nokia SROS series systems." ::= { tmnxSapGroups 467 } tmnxSapNotificationV13v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapStatHost6DynMacConflict } STATUS current DESCRIPTION "The group of notifications about SAPs added in release 13.0 of the Nokia SROS series systems." ::= { tmnxSapGroups 476 } tmnxSapV13v0Group OBJECT-GROUP OBJECTS { sapNumEntries, sapPortId, sapEncapValue, sapRowStatus, sapType, sapDescription, sapAdminStatus, sapOperStatus, sapIngressQosPolicyId, sapIngressMacFilterId, sapIngressIpFilterId, sapIngressVlanTranslationId, sapEgressQosPolicyId, sapEgressMacFilterId, sapEgressIpFilterId, sapMirrorStatus, sapIesIfIndex, sapLastMgmtChange, sapCollectAcctStats, sapAccountingPolicyId, sapVpnId, sapCustId, sapCustMultSvcSite, sapIngressQosSchedulerPolicy, sapEgressQosSchedulerPolicy, sapSplitHorizonGrp, sapIngressSharedQueuePolicy, sapIngressMatchQinQDot1PBits, sapOperFlags, sapLastStatusChange, sapAntiSpoofing, sapTodSuite, sapIngUseMultipointShared, sapEgressQinQMarkTopOnly, sapEndPoint, sapIngressVlanTranslation, sapSubType, sapCpmProtPolicyId, sapCpmProtMonitorMac, sapEgressFrameBasedAccounting, sapEthernetLLFAdminStatus, sapEthernetLLFOperStatus, sapTlsMvplsRowStatus, sapEgressFrameBasedAccounting, sapCallingStationId, sapIngPolicerPolicy, sapEgrPolicerPolicy, sapIpv6HostInfoIpoeDhcp6Hosts, sapIpv6HostInfoPppDhcp6Hosts, sapIpv6HostInfoPppSLAACHosts, sapIngQosQMBSBytes, sapEgrQosQMBSBytes } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP capabilities for 13.0 release on Nokia SROS series systems." ::= { tmnxSapGroups 477 } tmnxSapMvrpV13v0Group OBJECT-GROUP OBJECTS { sapTmplLastChanged, sapTmplRowStatus, sapTmplSapCount, sapTmplType, sapTmplTblLastChanged, sapTmplTlsLastChanged, sapTmplTlsMacAgeing, sapTmplTlsTblLastChanged, sapTlsEsVidGrpEndVlanTag, sapTlsEsVidGrpLastChgd, sapTlsEsVidGrpRowStatus, sapTlsEsVidGrpStartVlanTag, sapTlsEsVidGrpTblLastChanged, sapTmplUsed, sapTmplUserCreationOrigin, sapTmplUserCreatorSvcId, sapTmplCollectAcctStats, sapTmplEgrPolicerPolicy, sapTmplEgressFrameBasedAcctg, sapTmplEgressIpFilterId, sapTmplEgressIpv6FilterId, sapTmplEgressMacFilterId, sapTmplEgressQinQMarkTopOnly, sapTmplEgressQosPolicyId, sapTmplEgressQosSchedulerPolicy, sapTmplIngPolicerPolicy, sapTmplIngUseMultipointShared, sapTmplIngressIpFilterId, sapTmplIngressIpv6FilterId, sapTmplIngressMacFilterId, sapTmplIngressMatchQinQDot1PBits, sapTmplIngressQosPolicyId, sapTmplIngressQosSchedulerPolicy, sapTmplIngressSharedQueuePolicy, sapTmplTlsBpduTranslation, sapTmplTlsDiscardUnknownSource, sapTmplTlsL2ptProtocols, sapTmplTlsL2ptTermination, sapTmplTlsLimitMacMove, sapTmplTlsLimitMacMoveLevel, sapTmplTlsMacAddressLimit, sapTmplTlsMacLearning, sapTmplTlsStpAdminPointToPoint, sapTmplTlsStpAdminStatus, sapTmplTlsStpAutoEdge, sapTmplTlsStpBpduEncap, sapTmplTlsStpPathCost, sapTmplTlsStpPriority, sapTmplTlsStpRapidStart, sapTmplTlsStpRootGuard, sapTmplDot1agCfmMip, sapTmplCpmProtPolicyId, sapTmplCpmProtMonitorMac, sapTlsDataSapInstStatus, sapTlsDataSapInstLastErr, sapTlsMvrpDeclared, sapTlsMvrpEndStation, sapTlsMvrpRegistered, sapTlsMvrpAdminStatus, sapTlsMvrpOperStatus, sapTlsInTcBitBpdus, sapTlsOutTcBitBpdus } STATUS current DESCRIPTION "The group of objects supporting management of SAP MVRP capabilities on release 13.0 of Nokia SROS series systems." ::= { tmnxSapGroups 478 } tmnxSapEgrEncapGrpV13v0Group OBJECT-GROUP OBJECTS { sapEgrEncapGroupTblLastChgd, sapEgrEncapGroupRowStatus, sapEgrEncapGroupLastChanged, sapEgrEncapGroupType, sapEgrEncapGroupQosPerMember, sapEgrEncapGroupQosPolicyId, sapEgrEncapGroupSchedulerPolicy, sapEgrEncapGrpFrameBasedAccnt, sapEgrEncapGrpMemActTblLastChgd, sapEgrEncapGroupBeginMember, sapEgrEncapGroupEndMember, sapEgrEncapGroupMemberAction, sapEgrEncapGrpRangeEndId, sapEgrEncapGrpMemberLastChanged, sapEgrEGBaseStLastClearedTime, sapEgrEGBaseStCustId, sapEgrEGBaseStQcDpdInPfPkts, sapEgrEGBaseStQcDpdInPfPkts, sapEgrEGBaseStQcDpdInPfPktsL, sapEgrEGBaseStQcDpdInPfPktsH, sapEgrEGBaseStQcDpdInPfOcts, sapEgrEGBaseStQcDpdInPfOctsL, sapEgrEGBaseStQcDpdInPfOctsH, sapEgrEGBaseStQcDpdOutPfPkts, sapEgrEGBaseStQcDpdOutPfPktsL, sapEgrEGBaseStQcDpdOutPfPktsH, sapEgrEGBaseStQcDpdOutPfOcts, sapEgrEGBaseStQcDpdOutPfOctsL, sapEgrEGBaseStQcDpdOutPfOctsH, sapEgrEGBaseStQcFwdInPfPkts, sapEgrEGBaseStQcFwdInPfPktsL, sapEgrEGBaseStQcFwdInPfPktsH, sapEgrEGBaseStQcFwdInPfOcts, sapEgrEGBaseStQcFwdInPfOctsL, sapEgrEGBaseStQcFwdInPfOctsH, sapEgrEGBaseStQcFwdOutPfPkts, sapEgrEGBaseStQcFwdOutPfPktsL, sapEgrEGBaseStQcFwdOutPfPktsH, sapEgrEGBaseStQcFwdOutPfOcts, sapEgrEGBaseStQcFwdOutPfOctsL, sapEgrEGBaseStQcFwdOutPfOctsH, sapEgrEGMbrBaseStQcDpdInPfPkts, sapEgrEGMbrBaseStQcDpdInPfPktsL, sapEgrEGMbrBaseStQcDpdInPfPktsH, sapEgrEGMbrBaseStQcDpdInPfOcts, sapEgrEGMbrBaseStQcDpdInPfOctsL, sapEgrEGMbrBaseStQcDpdInPfOctsH, sapEgrEGMbrBaseStQcDpdOutPfPkts, sapEgrEGMbrBaseStQcDpdOutPfPktsL, sapEgrEGMbrBaseStQcDpdOutPfPktsH, sapEgrEGMbrBaseStQcDpdOutPfOcts, sapEgrEGMbrBaseStQcDpdOutPfOctsL, sapEgrEGMbrBaseStQcDpdOutPfOctsH, sapEgrEGMbrBaseStQcFwdInPfPkts, sapEgrEGMbrBaseStQcFwdInPfPktsL, sapEgrEGMbrBaseStQcFwdInPfPktsH, sapEgrEGMbrBaseStQcFwdInPfOcts, sapEgrEGMbrBaseStQcFwdInPfOctsL, sapEgrEGMbrBaseStQcFwdInPfOctsH, sapEgrEGMbrBaseStQcFwdOutPfPkts, sapEgrEGMbrBaseStQcFwdOutPfPktsL, sapEgrEGMbrBaseStQcFwdOutPfPktsH, sapEgrEGMbrBaseStQcFwdOutPfOcts, sapEgrEGMbrBaseStQcFwdOutPfOctsL, sapEgrEGMbrBaseStQcFwdOutPfOctsH, sapEgrEGMbrBaseStLstClearedTime, sapEgrEGMbrBaseStCustId, sapEgrEGQueueStFwdInPfPkts, sapEgrEGQueueStFwdInPfPktsL, sapEgrEGQueueStFwdInPfPktsH, sapEgrEGQueueStDpdInPfPkts, sapEgrEGQueueStDpdInPfPktsL, sapEgrEGQueueStDpdInPfPktsH, sapEgrEGQueueStFwdOutPfPkts, sapEgrEGQueueStFwdOutPfPktsL, sapEgrEGQueueStFwdOutPfPktsH, sapEgrEGQueueStDpdOutPfPkts, sapEgrEGQueueStDpdOutPfPktsL, sapEgrEGQueueStDpdOutPfPktsH, sapEgrEGQueueStFwdInPfOcts, sapEgrEGQueueStFwdInPfOctsL, sapEgrEGQueueStFwdInPfOctsH, sapEgrEGQueueStDpdInPfOcts, sapEgrEGQueueStDpdInPfOctsL, sapEgrEGQueueStDpdInPfOctsH, sapEgrEGQueueStFwdOutPfOcts, sapEgrEGQueueStFwdOutPfOctsL, sapEgrEGQueueStFwdOutPfOctsH, sapEgrEGQueueStDpdOutPfOcts, sapEgrEGQueueStDpdOutPfOctsL, sapEgrEGQueueStDpdOutPfOctsH, sapEgrEGCustId, sapEgrEGMbrQueueStFwdInPfPkts, sapEgrEGMbrQueueStFwdInPfPktsL, sapEgrEGMbrQueueStFwdInPfPktsH, sapEgrEGMbrQueueStDpdInPfPkts, sapEgrEGMbrQueueStDpdInPfPktsL, sapEgrEGMbrQueueStDpdInPfPktsH, sapEgrEGMbrQueueStFwdOutPfPkts, sapEgrEGMbrQueueStFwdOutPfPktsL, sapEgrEGMbrQueueStFwdOutPfPktsH, sapEgrEGMbrQueueStDpdOutPfPkts, sapEgrEGMbrQueueStDpdOutPfPktsL, sapEgrEGMbrQueueStDpdOutPfPktsH, sapEgrEGMbrQueueStFwdInPfOcts, sapEgrEGMbrQueueStFwdInPfOctsL, sapEgrEGMbrQueueStFwdInPfOctsH, sapEgrEGMbrQueueStDpdInPfOcts, sapEgrEGMbrQueueStDpdInPfOctsL, sapEgrEGMbrQueueStDpdInPfOctsH, sapEgrEGMbrQueueStFwdOutPfOcts, sapEgrEGMbrQueueStFwdOutPfOctsL, sapEgrEGMbrQueueStFwdOutPfOctsH, sapEgrEGMbrQueueStDpdOutPfOcts, sapEgrEGMbrQueueStDpdOutPfOctsL, sapEgrEGMbrQueueStDpdOutPfOctsH, sapEgrEGMbrQueueCustId, sapEgrEGSchedStFwdPkts, sapEgrEGSchedStFwdPktsL, sapEgrEGSchedStFwdPktsH, sapEgrEGSchedStFwdOcts, sapEgrEGSchedStFwdOctsL, sapEgrEGSchedStFwdOctsH, sapEgrEGSchedCustId, sapEgrEGMbrSchedStFwdPkts, sapEgrEGMbrSchedStFwdPktsL, sapEgrEGMbrSchedStFwdPktsH, sapEgrEGMbrSchedStFwdOcts, sapEgrEGMbrSchedStFwdOctsL, sapEgrEGMbrSchedStFwdOctsH, sapEgrEGMbrSchedCustId, sapPortIdEgrEGSchedFwdPkts, sapPortIdEgrEGSchedFwdPktsL, sapPortIdEgrEGSchedFwdPktsH, sapPortIdEgrEGSchedFwdOcts, sapPortIdEgrEGSchedFwdOctsL, sapPortIdEgrEGSchedFwdOctsH, sapPortIdEgrEGSchedCustId, sapPortIdEgrEGMbrSchedFwdPkts, sapPortIdEgrEGMbrSchedFwdPktsL, sapPortIdEgrEGMbrSchedFwdPktsH, sapPortIdEgrEGMbrSchedFwdOcts, sapPortIdEgrEGMbrSchedFwdOctsL, sapPortIdEgrEGMbrSchedFwdOctsH, sapPortIdEgrEGMbrSchedCustId } STATUS current DESCRIPTION "The group of objects supporting management of SAP encapsulation group on Nokia SROS series systems in release 13.0." ::= { tmnxSapGroups 479 } tmnxSapObsoletedV13v0Group OBJECT-GROUP OBJECTS { sapEgressAggRateLimit, sapTmplEgressAggRateLimit, sapEgrEncapGroupAggRateLimit } STATUS current DESCRIPTION "The group of obsoleted objects supporting management of SAP capabilities for 13.0 release on Nokia SROS series systems." ::= { tmnxSapGroups 480 } sapBgpEvpnMplsMhGroup OBJECT-GROUP OBJECTS { sapEvpnMHEthSegName } STATUS current DESCRIPTION "The group of objects supporting SAP BGP EVPN (Ethernet - VPN) MPLS Multi Home feature on Nokia SROS series systems release 13.0." ::= { tmnxSapGroups 481 } tmnxSapV14v0Group OBJECT-GROUP OBJECTS { sapTlsDataMsapTrigger, tmnxSapTlsExPppoePythonPolicy, tmnxSapTlsExAllowDot1qMsap, sapBandwidth } STATUS current DESCRIPTION "The group of objects supporting management of SAP general capabilities added in release 14.0 of Nokia SROS series systems." ::= { tmnxSapGroups 482 } tmnxSapMsapV14v0Group OBJECT-GROUP OBJECTS { msapTlsPlcyIgmpSnpgMcIfPlcyName } STATUS current DESCRIPTION "The group of objects supporting management of MSAP added in release 14.0 on Nokia SROS series systems." ::= { tmnxSapGroups 483 } tmnxSapVplsV14v0Group OBJECT-GROUP OBJECTS { tmnxSapTlsExEgressDestMac } STATUS current DESCRIPTION "The group of objects supporting management of VPLS SAP capabilities added in release 14.0 of Nokia SROS series systems." ::= { tmnxSapGroups 484 } tmnxSapQosStatsGroup OBJECT-GROUP OBJECTS { sapEgrQosPStatsFwdExdProfPkts, sapEgrQosPStatsDrpExdProfPkts, sapEgrQosPStatsFwdExdProfOcts, sapEgrQosPStatsDrpExdProfOcts } STATUS current DESCRIPTION "The group of objects supporting management of SAP Egress QoS statistics capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 485 } tmnxSapStickyMsapGroup OBJECT-GROUP OBJECTS { msapPlcySticky, msapInfoIsIdle, msapInfoIsSticky } STATUS current DESCRIPTION "The group of objects supporting management of sticky managed SAPs on Nokia SROS series systems." ::= { tmnxSapGroups 486 } tmnxEvpnMplsMacMovNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { svcEvpnMplsMacMoveExceedNonBlock } STATUS current DESCRIPTION "The group notifications supporting BGP EVPN MPLS feature on Nokia SROS series systems release 13.0." ::= { tmnxSapGroups 487 } tmnxSapInfoV14v0Group OBJECT-GROUP OBJECTS { sapNumEntries, sapPortId, sapEncapValue, sapRowStatus, sapType, sapDescription, sapAdminStatus, sapOperStatus, sapIngressQosPolicyId, sapIngressMacFilterId, sapIngressIpFilterId, sapIngressVlanTranslationId, sapEgressQosPolicyId, sapEgressMacFilterId, sapEgressIpFilterId, sapMirrorStatus, sapIesIfIndex, sapLastMgmtChange, sapCollectAcctStats, sapAccountingPolicyId, sapVpnId, sapCustId, sapCustMultSvcSite, sapIngressQosSchedulerPolicy, sapEgressQosSchedulerPolicy, sapSplitHorizonGrp, sapIngressSharedQueuePolicy, sapIngressMatchQinQDot1PBits, sapOperFlags, sapLastStatusChange, sapAntiSpoofing, sapIngUseMultipointShared, sapEgressQinQMarkTopOnly, sapEndPoint, sapIngressVlanTranslation, sapSubType, sapCpmProtPolicyId, sapCpmProtMonitorMac, sapEgressFrameBasedAccounting, sapEthernetLLFAdminStatus, sapEthernetLLFOperStatus, sapTlsMvplsRowStatus, sapEgressFrameBasedAccounting, sapCallingStationId, sapIngPolicerPolicy, sapEgrPolicerPolicy, sapIpv6HostInfoIpoeDhcp6Hosts, sapIpv6HostInfoPppDhcp6Hosts, sapIpv6HostInfoPppSLAACHosts, sapIngQosQMBSBytes, sapEgrQosQMBSBytes } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP capabilities for 14.0 release on Nokia SROS series systems." ::= { tmnxSapGroups 488 } tmnxSapObsoletedV14v0Group OBJECT-GROUP OBJECTS { sapTodSuite, sapCurrentIngressIpFilterId, sapCurrentIngressMacFilterId, sapCurrentIngressQosPolicyId, sapCurrentIngressQosSchedPlcy, sapCurrentEgressIpFilterId, sapCurrentEgressMacFilterId, sapCurrentEgressQosPolicyId, sapCurrentEgressQosSchedPlcy, sapIntendedIngressIpFilterId, sapIntendedIngressMacFilterId, sapIntendedIngressQosPolicyId, sapIntendedIngressQosSchedPlcy, sapIntendedEgressIpFilterId, sapIntendedEgressMacFilterId, sapIntendedEgressQosPolicyId, sapIntendedEgressQosSchedPlcy, sapIgQosPlcyDroppedHiPrioPackets, sapIgQosPlcyDroppedHiPrioOctets, sapIgQosPlcyDroppedLoPrioPackets, sapIgQosPlcyDroppedLoPrioOctets, sapIgQosPlcyForwardedInProfPackets, sapIgQosPlcyForwardedInProfOctets, sapIgQosPlcyForwardedOutProfPackets, sapIgQosPlcyForwardedOutProfOctets, sapEgQosPlcyDroppedInProfPackets, sapEgQosPlcyDroppedInProfOctets, sapEgQosPlcyDroppedOutProfPackets, sapEgQosPlcyDroppedOutProfOctets, sapEgQosPlcyForwardedInProfPackets, sapEgQosPlcyForwardedInProfOctets, sapEgQosPlcyForwardedOutProfPackets, sapEgQosPlcyForwardedOutProfOctets, sapIgQosPlcyQueueStatsOfferedHiPrioPackets, sapIgQosPlcyQueueStatsDroppedHiPrioPackets, sapIgQosPlcyQueueStatsOfferedLoPrioPackets, sapIgQosPlcyQueueStatsDroppedLoPrioPackets, sapIgQosPlcyQueueStatsOfferedHiPrioOctets, sapIgQosPlcyQueueStatsDroppedHiPrioOctets, sapIgQosPlcyQueueStatsOfferedLoPrioOctets, sapIgQosPlcyQueueStatsDroppedLoPrioOctets, sapIgQosPlcyQueueStatsForwardedInProfPackets, sapIgQosPlcyQueueStatsForwardedOutProfPackets, sapIgQosPlcyQueueStatsForwardedInProfOctets, sapIgQosPlcyQueueStatsForwardedOutProfOctets, sapIgQosPlcyQueueCustId, sapIgQosPlcyQueueStatsUncoloredPacketsOffered, sapIgQosPlcyQueueStatsUncoloredOctetsOffered, sapEgQosPlcyQueueStatsForwardedInProfPackets, sapEgQosPlcyQueueStatsDroppedInProfPackets, sapEgQosPlcyQueueStatsForwardedOutProfPackets, sapEgQosPlcyQueueStatsDroppedOutProfPackets, sapEgQosPlcyQueueStatsForwardedInProfOctets, sapEgQosPlcyQueueStatsDroppedInProfOctets, sapEgQosPlcyQueueStatsForwardedOutProfOctets, sapEgQosPlcyQueueStatsDroppedOutProfOctets, sapEgQosPlcyQueueCustId, sapIngSchedPlcyStatsFwdPkt, sapIngSchedPlcyStatsFwdOct, sapEgrSchedPlcyStatsFwdPkt, sapEgrSchedPlcyStatsFwdOct, sapIngSchedPlcyPortStatsFwdPkt, sapIngSchedPlcyPortStatsFwdOct, sapEgrSchedPlcyPortStatsFwdPkt, sapEgrSchedPlcyPortStatsFwdOct, sapIgQosPlcyPStatCustId, sapIgQosPlcyPStatMode, sapIgQosPlcyPStatOffHiPrioPkts, sapIgQosPlcyPStatDrpHiPrioPkts, sapIgQosPlcyPStatOffLoPrioPkts, sapIgQosPlcyPStatDrpLoPrioPkts, sapIgQosPlcyPStatOffHiPrioOcts, sapIgQosPlcyPStatDrpHiPrioOcts, sapIgQosPlcyPStatOffLoPrioOcts, sapIgQosPlcyPStatDrpLoPrioOcts, sapIgQosPlcyPStatFwdInProfPkts, sapIgQosPlcyPStatFwdOutProfPkts, sapIgQosPlcyPStatFwdInProfOcts, sapIgQosPlcyPStatFwdOutProfOcts, sapIgQosPlcyPStatUncolPktsOff, sapIgQosPlcyPStatUncolOctsOff, sapIgQosPlcyPStatOffHiPrioPkts, sapIgQosPlcyPStatOffHiPrioPktsL, sapIgQosPlcyPStatOffHiPrioPktsH, sapIgQosPlcyPStatDrpHiPrioPkts, sapIgQosPlcyPStatDrpHiPrioPktsL, sapIgQosPlcyPStatDrpHiPrioPktsH, sapIgQosPlcyPStatOffLoPrioPkts, sapIgQosPlcyPStatOffLoPrioPktsL, sapIgQosPlcyPStatOffLoPrioPktsH, sapIgQosPlcyPStatDrpLoPrioPkts, sapIgQosPlcyPStatDrpLoPrioPktsL, sapIgQosPlcyPStatDrpLoPrioPktsH, sapIgQosPlcyPStatOffHiPrioOcts, sapIgQosPlcyPStatOffHiPrioOctsL, sapIgQosPlcyPStatOffHiPrioOctsH, sapIgQosPlcyPStatDrpHiPrioOcts, sapIgQosPlcyPStatDrpHiPrioOctsL, sapIgQosPlcyPStatDrpHiPrioOctsH, sapIgQosPlcyPStatOffLoPrioOcts, sapIgQosPlcyPStatOffLoPrioOctsL, sapIgQosPlcyPStatOffLoPrioOctsH, sapIgQosPlcyPStatDrpLoPrioOcts, sapIgQosPlcyPStatDrpLoPrioOctsL, sapIgQosPlcyPStatDrpLoPrioOctsH, sapIgQosPlcyPStatFwdInProfPkts, sapIgQosPlcyPStatFwdInProfPktsL, sapIgQosPlcyPStatFwdInProfPktsH, sapIgQosPlcyPStatFwdOutProfPkts, sapIgQosPlcyPStatFwdOutProfPktsL, sapIgQosPlcyPStatFwdOutProfPktsH, sapIgQosPlcyPStatFwdInProfOcts, sapIgQosPlcyPStatFwdInProfOctsL, sapIgQosPlcyPStatFwdInProfOctsH, sapIgQosPlcyPStatFwdOutProfOcts, sapIgQosPlcyPStatFwdOutProfOctsL, sapIgQosPlcyPStatFwdOutProfOctsH, sapIgQosPlcyPStatUncolPktsOff, sapIgQosPlcyPStatUncolPktsOffL, sapIgQosPlcyPStatUncolPktsOffH, sapIgQosPlcyPStatUncolOctsOff, sapIgQosPlcyPStatUncolOctsOffL, sapIgQosPlcyPStatUncolOctsOffH, sapEgQosPlcyPStatCustId, sapEgQosPlcyPStatMode, sapEgQosPlcyPStatOffInProfPkts, sapEgQosPlcyPStatOffInProfPktsL, sapEgQosPlcyPStatOffInProfPktsH, sapEgQosPlcyPStatFwdInProfPkts, sapEgQosPlcyPStatFwdInProfPktsL, sapEgQosPlcyPStatFwdInProfPktsH, sapEgQosPlcyPStatDrpInProfPkts, sapEgQosPlcyPStatDrpInProfPktsL, sapEgQosPlcyPStatDrpInProfPktsH, sapEgQosPlcyPStatOffOutProfPkts, sapEgQosPlcyPStatOffOutProfPktsL, sapEgQosPlcyPStatOffOutProfPktsH, sapEgQosPlcyPStatFwdOutProfPkts, sapEgQosPlcyPStatFwdOutProfPktsL, sapEgQosPlcyPStatFwdOutProfPktsH, sapEgQosPlcyPStatDrpOutProfPkts, sapEgQosPlcyPStatDrpOutProfPktsL, sapEgQosPlcyPStatDrpOutProfPktsH, sapEgQosPlcyPStatOffInProfOcts, sapEgQosPlcyPStatOffInProfOctsL, sapEgQosPlcyPStatOffInProfOctsH, sapEgQosPlcyPStatFwdInProfOcts, sapEgQosPlcyPStatFwdInProfOctsL, sapEgQosPlcyPStatFwdInProfOctsH, sapEgQosPlcyPStatDrpInProfOcts, sapEgQosPlcyPStatDrpInProfOctsL, sapEgQosPlcyPStatDrpInProfOctsH, sapEgQosPlcyPStatOffOutProfOcts, sapEgQosPlcyPStatOffOutProfOctsL, sapEgQosPlcyPStatOffOutProfOctsH, sapEgQosPlcyPStatFwdOutProfOcts, sapEgQosPlcyPStatFwdOutProfOctsL, sapEgQosPlcyPStatFwdOutProfOctsH, sapEgQosPlcyPStatDrpOutProfOcts, sapEgQosPlcyPStatDrpOutProfOctsL, sapEgQosPlcyPStatDrpOutProfOctsH, sapCurrentIngressIpv6FilterId, sapCurrentEgressIpv6FilterId, sapIntendedIngressIpv6FilterId, sapIntendedEgressIpv6FilterId } STATUS current DESCRIPTION "The group of obsoleted objects supporting management of SAP capabilities for 14.0 release on Nokia SROS series systems." ::= { tmnxSapGroups 489 } tmnxSapQosV14v0Group OBJECT-GROUP OBJECTS { sapIngQosQueueId, sapIngQosQueueStatsOfferedHiPrioPackets, sapIngQosQueueStatsDroppedHiPrioPackets, sapIngQosQueueStatsOfferedLoPrioPackets, sapIngQosQueueStatsDroppedLoPrioPackets, sapIngQosQueueStatsOfferedHiPrioOctets, sapIngQosQueueStatsDroppedHiPrioOctets, sapIngQosQueueStatsOfferedLoPrioOctets, sapIngQosQueueStatsDroppedLoPrioOctets, sapIngQosQueueStatsForwardedInProfPackets, sapIngQosQueueStatsForwardedOutProfPackets, sapIngQosQueueStatsForwardedInProfOctets, sapIngQosQueueStatsForwardedOutProfOctets, sapIngQosCustId, sapIngQosQueueStatsUncoloredPacketsOffered, sapIngQosQueueStatsUncoloredOctetsOffered, sapEgrQosQueueId, sapEgrQosQueueStatsForwardedInProfPackets, sapEgrQosQueueStatsDroppedInProfPackets, sapEgrQosQueueStatsForwardedOutProfPackets, sapEgrQosQueueStatsDroppedOutProfPackets, sapEgrQosQueueStatsForwardedInProfOctets, sapEgrQosQueueStatsDroppedInProfOctets, sapEgrQosQueueStatsForwardedOutProfOctets, sapEgrQosQueueStatsDroppedOutProfOctets, sapEgrQosCustId, sapIngQosSchedStatsForwardedPackets, sapIngQosSchedStatsForwardedOctets, sapIngQosSchedCustId, sapEgrQosSchedStatsForwardedPackets, sapEgrQosSchedStatsForwardedOctets, sapEgrQosSchedCustId, sapIngQosQRowStatus, sapIngQosQLastMgmtChange, sapIngQosQOverrideFlags, sapIngQosQCBS, sapIngQosQHiPrioOnly, sapIngQosQCIRAdaptation, sapIngQosQPIRAdaptation, sapIngQosQAdminPIR, sapIngQosQAdminCIR, sapEgrQosQRowStatus, sapEgrQosQLastMgmtChange, sapEgrQosQOverrideFlags, sapEgrQosQCBS, sapEgrQosQHiPrioOnly, sapEgrQosQCIRAdaptation, sapEgrQosQPIRAdaptation, sapEgrQosQAdminPIR, sapEgrQosQAdminCIR, sapEgrQosQAvgOverhead, sapIngQosSRowStatus, sapIngQosSLastMgmtChange, sapIngQosSOverrideFlags, sapIngQosSSummedCIR, sapEgrQosSRowStatus, sapEgrQosSLastMgmtChange, sapEgrQosSOverrideFlags, sapEgrQosSSummedCIR, sapIngQosPStatsCustId, sapIngQosPStatsMode, sapIngQosPStatsOffHiPrioPkts, sapIngQosPStatsOffHiPrioPktsLo, sapIngQosPStatsOffHiPrioPktsHi, sapIngQosPStatsDrpHiPrioPkts, sapIngQosPStatsDrpHiPrioPktsLo, sapIngQosPStatsDrpHiPrioPktsHi, sapIngQosPStatsOffLoPrioPkts, sapIngQosPStatsOffLoPrioPktsLo, sapIngQosPStatsOffLoPrioPktsHi, sapIngQosPStatsDrpLoPrioPkts, sapIngQosPStatsDrpLoPrioPktsLo, sapIngQosPStatsDrpLoPrioPktsHi, sapIngQosPStatsOffHiPrioOcts, sapIngQosPStatsOffHiPrioOctsLo, sapIngQosPStatsOffHiPrioOctsHi, sapIngQosPStatsDrpHiPrioOcts, sapIngQosPStatsDrpHiPrioOctsLo, sapIngQosPStatsDrpHiPrioOctsHi, sapIngQosPStatsOffLoPrioOcts, sapIngQosPStatsOffLoPrioOctsLo, sapIngQosPStatsOffLoPrioOctsHi, sapIngQosPStatsDrpLoPrioOcts, sapIngQosPStatsDrpLoPrioOctsLo, sapIngQosPStatsDrpLoPrioOctsHi, sapIngQosPStatsFwdInProfPkts, sapIngQosPStatsFwdInProfPktsLo, sapIngQosPStatsFwdInProfPktsHi, sapIngQosPStatsFwdOutProfPkts, sapIngQosPStatsFwdOutProfPktsLo, sapIngQosPStatsFwdOutProfPktsHi, sapIngQosPStatsFwdInProfOcts, sapIngQosPStatsFwdInProfOctsLo, sapIngQosPStatsFwdInProfOctsHi, sapIngQosPStatsFwdOutProfOcts, sapIngQosPStatsFwdOutProfOctsLo, sapIngQosPStatsFwdOutProfOctsHi, sapIngQosPStatsUncolPktsOff, sapIngQosPStatsUncolPktsOffLo, sapIngQosPStatsUncolPktsOffHi, sapIngQosPStatsUncolOctsOff, sapIngQosPStatsUncolOctsOffLo, sapIngQosPStatsUncolOctsOffHi, sapEgrQosPStatsCustId, sapEgrQosPStatsMode, sapEgrQosPStatsOffInProfPkts, sapEgrQosPStatsOffInProfPktsLo, sapEgrQosPStatsOffInProfPktsHi, sapEgrQosPStatsFwdInProfPkts, sapEgrQosPStatsFwdInProfPktsLo, sapEgrQosPStatsFwdInProfPktsHi, sapEgrQosPStatsDrpInProfPkts, sapEgrQosPStatsDrpInProfPktsLo, sapEgrQosPStatsDrpInProfPktsHi, sapEgrQosPStatsOffOutProfPkts, sapEgrQosPStatsOffOutProfPktsLo, sapEgrQosPStatsOffOutProfPktsHi, sapEgrQosPStatsFwdOutProfPkts, sapEgrQosPStatsFwdOutProfPktsLo, sapEgrQosPStatsFwdOutProfPktsHi, sapEgrQosPStatsDrpOutProfPkts, sapEgrQosPStatsDrpOutProfPktsLo, sapEgrQosPStatsDrpOutProfPktsHi, sapEgrQosPStatsOffInProfOcts, sapEgrQosPStatsOffInProfOctsLo, sapEgrQosPStatsOffInProfOctsHi, sapEgrQosPStatsFwdInProfOcts, sapEgrQosPStatsFwdInProfOctsLo, sapEgrQosPStatsFwdInProfOctsHi, sapEgrQosPStatsDrpInProfOcts, sapEgrQosPStatsDrpInProfOctsLo, sapEgrQosPStatsDrpInProfOctsHi, sapEgrQosPStatsOffOutProfOcts, sapEgrQosPStatsOffOutProfOctsLo, sapEgrQosPStatsOffOutProfOctsHi, sapEgrQosPStatsFwdOutProfOcts, sapEgrQosPStatsFwdOutProfOctsLo, sapEgrQosPStatsFwdOutProfOctsHi, sapEgrQosPStatsDrpOutProfOcts, sapEgrQosPStatsDrpOutProfOctsLo, sapEgrQosPStatsDrpOutProfOctsHi, sapEgrQosPStatsUncolPktsOff, sapEgrQosPStatsUncolPktsOffLo, sapEgrQosPStatsUncolPktsOffHi, sapEgrQosPStatsUncolOctsOff, sapEgrQosPStatsUncolOctsOffLo, sapEgrQosPStatsUncolOctsOffHi, sapEgrQosArbitStatsFwdOcts, sapEgrQosArbitStatsFwdOctsHi, sapEgrQosArbitStatsFwdOctsLo, sapEgrQosArbitStatsFwdPkts, sapEgrQosArbitStatsFwdPktsHi, sapEgrQosArbitStatsFwdPktsLo, sapIngQosArbitStatsFwdOcts, sapIngQosArbitStatsFwdOctsHi, sapIngQosArbitStatsFwdOctsLo, sapIngQosArbitStatsFwdPkts, sapIngQosArbitStatsFwdPktsHi, sapIngQosArbitStatsFwdPktsLo, sapPortIdEgrQosArbitFwdOcts, sapPortIdEgrQosArbitFwdOctsHi, sapPortIdEgrQosArbitFwdOctsLo, sapPortIdEgrQosArbitFwdPkts, sapPortIdEgrQosArbitFwdPktsHi, sapPortIdEgrQosArbitFwdPktsLo, sapPortIdIngQosArbitFwdOcts, sapPortIdIngQosArbitFwdOctsHi, sapPortIdIngQosArbitFwdOctsLo, sapPortIdIngQosArbitFwdPkts, sapPortIdIngQosArbitFwdPktsHi, sapPortIdIngQosArbitFwdPktsLo } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 490 } tmnxSapIpV6FilterV14v0Group OBJECT-GROUP OBJECTS { sapIngressIpv6FilterId, sapEgressIpv6FilterId } STATUS current DESCRIPTION "The group of objects supporting management of SAP Policy capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 491 } tmnxSapFlowSPecObsoletedV14v0Grp OBJECT-GROUP OBJECTS { sapIngressFlowspec, sapIngressIPv6Flowspec } STATUS current DESCRIPTION "The group of obsoleted objects supporting SAP BGP Flow-Spec feature on Nokia SROS series systems release 14.0." ::= { tmnxSapGroups 492 } sapEthLoopbackV14v0Group OBJECT-GROUP OBJECTS { sapEthLoopbackOperState } STATUS current DESCRIPTION "The group of additional objects supporting SAP Ethernet Loopback feature on Nokia SROS series systems release 14.0." ::= { tmnxSapGroups 493 } tmnxSapTlsPbbV14v0Group OBJECT-GROUP OBJECTS { sapTlsDisableSendBvplsEvpnFlush } STATUS current DESCRIPTION "The group of additional objects supporting SAP PBB feature on Nokia SROS series systems release 14.0." ::= { tmnxSapGroups 494 } tmnxSapVprnLoopbackV14v0Group OBJECT-GROUP OBJECTS { sapL3LoopbackRowStatus, sapL3LoopbackIgnrPortOpState } STATUS current DESCRIPTION "The group of objects supporting management of the SAP VPRN Loopback feature on Nokia SROS series systems in release 14.0." ::= { tmnxSapGroups 495 } tmnxSapL2tpv3V14v0Group OBJECT-GROUP OBJECTS { sapL2tpv3TableLastChanged, sapL2tpv3RowStatus, sapL2tpv3LastChanged, sapL2tpv3ServiceId, sapL2tpv3RouterId, sapL2tpv3TunnelGroupName, sapL2tpv3VcId, sapL2tpv3PwType, sapL2tpv3AdminState, sapL2tpv3OperState, sapL2tpv3TunnelStatus, sapL2tpv3OperFlags, sapL2tpv3LastOperChgd, sapL2tpv3HostISA, sapL2tpv3EthVlanQtag } STATUS obsolete DESCRIPTION "The group of objects supporting management of the SAP L2TPV3 feature on Nokia SROS series systems in release 14.0." ::= { tmnxSapGroups 496 } tmnxSapBgpEvpnAlmpGroup OBJECT-GROUP OBJECTS { sapTlsRestProtSrcMacOper, sapTlsRestProtSrcMacOperAct } STATUS current DESCRIPTION "The group of objects supporting management of the SAP BGP EVPN feature on Nokia SROS series systems in release 14.0." ::= { tmnxSapGroups 497 } sapL3LoopbackNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { sapIfIgnorePortStateStart, sapIfIgnorePortStateStop } STATUS current DESCRIPTION "The group notifications supporting SAP L3 Loopback feature on Nokia SROS series systems release 14.0." ::= { tmnxSapGroups 498 } sapV14v0NotifyObjsGroup OBJECT-GROUP OBJECTS { sapNotifyIfName } STATUS current DESCRIPTION "A group of notification objects added in release 14.0 of Nokia SROS series systems." ::= { tmnxSapGroups 499 } tmnxSapEgrQosStatsGroup OBJECT-GROUP OBJECTS { sapEgrQosPStatsOffExdProfPkts, sapEgrQosPStatsOffExdProfOcts, sapEgrQosPStatsOffInPlusProfPkts, sapEgrQosPStatsFwdInPlusProfPkts, sapEgrQosPStatsDrpInPlusProfPkts, sapEgrQosPStatsOffInPlusProfOcts, sapEgrQosPStatsFwdInPlusProfOcts, sapEgrQosPStatsDrpInPlusProfOcts } STATUS current DESCRIPTION "The group of objects supporting management of SAP Egress QoS statistics capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 500 } tmnxDDosDCpuProtPolicyGrp OBJECT-GROUP OBJECTS { sapOperDCpuProtPolicy, sapTmplDCpuProtPolicy } STATUS current DESCRIPTION "The group of objects supporting management of DDos Protection Enhancement feature on Nokia SROS series systems." ::= { tmnxSapGroups 501 } tmnxSapCfmLmmPerQosV15v0Group OBJECT-GROUP OBJECTS { sapEthCfmCollLmmFcSts, sapEthCfmCollLmmFcStsInP } STATUS current DESCRIPTION "The group of objects supporting the ETH-LMM per QoS Class feature on Nokia SROS series systems." ::= { tmnxSapGroups 502 } tmnxSapQosQDropTailGroup OBJECT-GROUP OBJECTS { sapIngQosQDrpTailLowReductnMbs, sapEgrQosQDrpTailLowReductnMbs } STATUS current DESCRIPTION "The group of objects supporting management of SAP QoS drop tail configuration on Nokia SROS series systems." ::= { tmnxSapGroups 503 } tmnxSapQosV15v0Group OBJECT-GROUP OBJECTS { sapIngQosQueueId, sapIngQosQueueStatsOfferedHiPrioPackets, sapIngQosQueueStatsDroppedHiPrioPackets, sapIngQosQueueStatsOfferedLoPrioPackets, sapIngQosQueueStatsDroppedLoPrioPackets, sapIngQosQueueStatsOfferedHiPrioOctets, sapIngQosQueueStatsDroppedHiPrioOctets, sapIngQosQueueStatsOfferedLoPrioOctets, sapIngQosQueueStatsDroppedLoPrioOctets, sapIngQosQueueStatsForwardedInProfPackets, sapIngQosQueueStatsForwardedOutProfPackets, sapIngQosQueueStatsForwardedInProfOctets, sapIngQosQueueStatsForwardedOutProfOctets, sapIngQosCustId, sapIngQosQueueStatsUncoloredPacketsOffered, sapIngQosQueueStatsUncoloredOctetsOffered, sapEgrQosQueueId, sapEgrQosQueueStatsForwardedInProfPackets, sapEgrQosQueueStatsDroppedInProfPackets, sapEgrQosQueueStatsForwardedOutProfPackets, sapEgrQosQueueStatsDroppedOutProfPackets, sapEgrQosQueueStatsForwardedInProfOctets, sapEgrQosQueueStatsDroppedInProfOctets, sapEgrQosQueueStatsForwardedOutProfOctets, sapEgrQosQueueStatsDroppedOutProfOctets, sapEgrQosCustId, sapIngQosSchedStatsForwardedPackets, sapIngQosSchedStatsForwardedOctets, sapIngQosSchedCustId, sapEgrQosSchedStatsForwardedPackets, sapEgrQosSchedStatsForwardedOctets, sapEgrQosSchedCustId, sapIngQosQRowStatus, sapIngQosQLastMgmtChange, sapIngQosQOverrideFlags, sapIngQosQCBS, sapIngQosQCIRAdaptation, sapIngQosQPIRAdaptation, sapIngQosQAdminPIR, sapIngQosQAdminCIR, sapEgrQosQRowStatus, sapEgrQosQLastMgmtChange, sapEgrQosQOverrideFlags, sapEgrQosQCBS, sapEgrQosQCIRAdaptation, sapEgrQosQPIRAdaptation, sapEgrQosQAdminPIR, sapEgrQosQAdminCIR, sapEgrQosQAvgOverhead, sapIngQosSRowStatus, sapIngQosSLastMgmtChange, sapIngQosSOverrideFlags, sapIngQosSSummedCIR, sapEgrQosSRowStatus, sapEgrQosSLastMgmtChange, sapEgrQosSOverrideFlags, sapEgrQosSSummedCIR, sapIngQosPStatsCustId, sapIngQosPStatsMode, sapIngQosPStatsOffHiPrioPkts, sapIngQosPStatsOffHiPrioPktsLo, sapIngQosPStatsOffHiPrioPktsHi, sapIngQosPStatsDrpHiPrioPkts, sapIngQosPStatsDrpHiPrioPktsLo, sapIngQosPStatsDrpHiPrioPktsHi, sapIngQosPStatsOffLoPrioPkts, sapIngQosPStatsOffLoPrioPktsLo, sapIngQosPStatsOffLoPrioPktsHi, sapIngQosPStatsDrpLoPrioPkts, sapIngQosPStatsDrpLoPrioPktsLo, sapIngQosPStatsDrpLoPrioPktsHi, sapIngQosPStatsOffHiPrioOcts, sapIngQosPStatsOffHiPrioOctsLo, sapIngQosPStatsOffHiPrioOctsHi, sapIngQosPStatsDrpHiPrioOcts, sapIngQosPStatsDrpHiPrioOctsLo, sapIngQosPStatsDrpHiPrioOctsHi, sapIngQosPStatsOffLoPrioOcts, sapIngQosPStatsOffLoPrioOctsLo, sapIngQosPStatsOffLoPrioOctsHi, sapIngQosPStatsDrpLoPrioOcts, sapIngQosPStatsDrpLoPrioOctsLo, sapIngQosPStatsDrpLoPrioOctsHi, sapIngQosPStatsFwdInProfPkts, sapIngQosPStatsFwdInProfPktsLo, sapIngQosPStatsFwdInProfPktsHi, sapIngQosPStatsFwdOutProfPkts, sapIngQosPStatsFwdOutProfPktsLo, sapIngQosPStatsFwdOutProfPktsHi, sapIngQosPStatsFwdInProfOcts, sapIngQosPStatsFwdInProfOctsLo, sapIngQosPStatsFwdInProfOctsHi, sapIngQosPStatsFwdOutProfOcts, sapIngQosPStatsFwdOutProfOctsLo, sapIngQosPStatsFwdOutProfOctsHi, sapIngQosPStatsUncolPktsOff, sapIngQosPStatsUncolPktsOffLo, sapIngQosPStatsUncolPktsOffHi, sapIngQosPStatsUncolOctsOff, sapIngQosPStatsUncolOctsOffLo, sapIngQosPStatsUncolOctsOffHi, sapEgrQosPStatsCustId, sapEgrQosPStatsMode, sapEgrQosPStatsOffInProfPkts, sapEgrQosPStatsOffInProfPktsLo, sapEgrQosPStatsOffInProfPktsHi, sapEgrQosPStatsFwdInProfPkts, sapEgrQosPStatsFwdInProfPktsLo, sapEgrQosPStatsFwdInProfPktsHi, sapEgrQosPStatsDrpInProfPkts, sapEgrQosPStatsDrpInProfPktsLo, sapEgrQosPStatsDrpInProfPktsHi, sapEgrQosPStatsOffOutProfPkts, sapEgrQosPStatsOffOutProfPktsLo, sapEgrQosPStatsOffOutProfPktsHi, sapEgrQosPStatsFwdOutProfPkts, sapEgrQosPStatsFwdOutProfPktsLo, sapEgrQosPStatsFwdOutProfPktsHi, sapEgrQosPStatsDrpOutProfPkts, sapEgrQosPStatsDrpOutProfPktsLo, sapEgrQosPStatsDrpOutProfPktsHi, sapEgrQosPStatsOffInProfOcts, sapEgrQosPStatsOffInProfOctsLo, sapEgrQosPStatsOffInProfOctsHi, sapEgrQosPStatsFwdInProfOcts, sapEgrQosPStatsFwdInProfOctsLo, sapEgrQosPStatsFwdInProfOctsHi, sapEgrQosPStatsDrpInProfOcts, sapEgrQosPStatsDrpInProfOctsLo, sapEgrQosPStatsDrpInProfOctsHi, sapEgrQosPStatsOffOutProfOcts, sapEgrQosPStatsOffOutProfOctsLo, sapEgrQosPStatsOffOutProfOctsHi, sapEgrQosPStatsFwdOutProfOcts, sapEgrQosPStatsFwdOutProfOctsLo, sapEgrQosPStatsFwdOutProfOctsHi, sapEgrQosPStatsDrpOutProfOcts, sapEgrQosPStatsDrpOutProfOctsLo, sapEgrQosPStatsDrpOutProfOctsHi, sapEgrQosPStatsUncolPktsOff, sapEgrQosPStatsUncolPktsOffLo, sapEgrQosPStatsUncolPktsOffHi, sapEgrQosPStatsUncolOctsOff, sapEgrQosPStatsUncolOctsOffLo, sapEgrQosPStatsUncolOctsOffHi, sapEgrQosArbitStatsFwdOcts, sapEgrQosArbitStatsFwdOctsHi, sapEgrQosArbitStatsFwdOctsLo, sapEgrQosArbitStatsFwdPkts, sapEgrQosArbitStatsFwdPktsHi, sapEgrQosArbitStatsFwdPktsLo, sapIngQosArbitStatsFwdOcts, sapIngQosArbitStatsFwdOctsHi, sapIngQosArbitStatsFwdOctsLo, sapIngQosArbitStatsFwdPkts, sapIngQosArbitStatsFwdPktsHi, sapIngQosArbitStatsFwdPktsLo, sapPortIdEgrQosArbitFwdOcts, sapPortIdEgrQosArbitFwdOctsHi, sapPortIdEgrQosArbitFwdOctsLo, sapPortIdEgrQosArbitFwdPkts, sapPortIdEgrQosArbitFwdPktsHi, sapPortIdEgrQosArbitFwdPktsLo, sapPortIdIngQosArbitFwdOcts, sapPortIdIngQosArbitFwdOctsHi, sapPortIdIngQosArbitFwdOctsLo, sapPortIdIngQosArbitFwdPkts, sapPortIdIngQosArbitFwdPktsHi, sapPortIdIngQosArbitFwdPktsLo } STATUS current DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Nokia SROS series systems." ::= { tmnxSapGroups 505 } tmnxSapObsoletedV15v0Group OBJECT-GROUP OBJECTS { sapIngQosQHiPrioOnly, sapEgrQosQHiPrioOnly, sapIngQosQAdminPIR, sapIngQosQAdminCIR, sapIngPlcrCtrlOvrMaxRate, sapEgrQosQAdminPIR, sapEgrQosQAdminCIR, sapEgrPlcrCtrlOvrMaxRate } STATUS current DESCRIPTION "The group of obsoleted objects supporting management of SAP capabilities for 15.0 release on Nokia SROS series systems." ::= { tmnxSapGroups 506 } tmnxSapEsmMacV15v0Group OBJECT-GROUP OBJECTS { sapStatHostAppProfileScope, sapStatHost6AppProfileScope } STATUS current DESCRIPTION "The group of objects supporting management of SAP AA sub per-mac host divert feature on Nokia SROS series systems added in release 15.0." ::= { tmnxSapGroups 507 } tmnxSapQosRateGroup OBJECT-GROUP OBJECTS { sapIngQosQAdminPIRHi, sapIngQosQAdminPIRLo, sapIngQosQAdminCIRHi, sapIngQosQAdminCIRLo, sapEgrQosQAdminPIRHi, sapEgrQosQAdminPIRLo, sapEgrQosQAdminCIRHi, sapEgrQosQAdminCIRLo, sapIngPlcrCtrlOvrMaxRateHi, sapIngPlcrCtrlOvrMaxRateLo, sapEgrPlcrCtrlOvrMaxRateHi, sapEgrPlcrCtrlOvrMaxRateLo, sapEgrEncapGrpAggRateLimitHi, sapTmplEgrAggRateLimitHi, sapEgressAggRateLmtHi } STATUS current DESCRIPTION "The group of additional objects enhancing the management of SAP QOS rates configuration on Nokia SROS series systems in Release 15.0." ::= { tmnxSapGroups 508 } tmnxSapQosHsQOvrGroup OBJECT-GROUP OBJECTS { sapEgrQosQueueOvrHsSecShaper, sapEgrQosQHsWrrWeight, sapEgrQosQHsClassWeight, sapEgrQosQHsWredQSlopePlcy } STATUS current DESCRIPTION "The group of objects supporting management of SAP egress QoS queue override feature on Nokia SROS series systems added in release 15.0." ::= { tmnxSapGroups 509 } tmnxSapTlsV15v0Group OBJECT-GROUP OBJECTS { sapTlsStpAdminStatus, sapTlsStpPriority, sapTlsStpPortNum, sapTlsStpPathCost, sapTlsStpRapidStart, sapTlsStpBpduEncap, sapTlsStpPortState, sapTlsStpDesignatedBridge, sapTlsStpDesignatedPort, sapTlsStpForwardTransitions, sapTlsStpInConfigBpdus, sapTlsStpInTcnBpdus, sapTlsStpInBadBpdus, sapTlsStpOutConfigBpdus, sapTlsStpOutTcnBpdus, sapTlsStpOperBpduEncap, sapTlsVpnId, sapTlsCustId, sapTlsMacAddressLimit, sapTlsNumMacAddresses, sapTlsNumStaticMacAddresses, sapTlsMacLearning, sapTlsMacAgeing, sapTlsStpOperEdge, sapTlsStpAdminPointToPoint, sapTlsStpPortRole, sapTlsStpAutoEdge, sapTlsStpOperProtocol, sapTlsStpInRstBpdus, sapTlsStpOutRstBpdus, sapTlsLimitMacMove, sapTlsMacPinning, sapTlsDiscardUnknownSource, sapTlsMvplsPruneState, sapTlsMvplsMgmtService, sapTlsMvplsMgmtPortId, sapTlsMvplsMgmtEncapValue, sapTlsArpReplyAgent, sapTlsStpException, sapTlsAuthenticationPolicy, sapTlsL2ptTermination, sapTlsBpduTranslation, sapTlsStpRootGuard, sapTlsStpInsideRegion, sapTlsStpInMstBpdus, sapTlsStpOutMstBpdus, sapTlsRestProtSrcMac, sapTlsRestProtSrcMacAction, sapTlsRestUnprotDstMac, sapTlsStpRxdDesigBridge, sapTlsStpRootGuardViolation, sapTlsShcvAction, sapTlsShcvSrcIp, sapTlsShcvSrcMac, sapTlsShcvInterval, sapTlsMvplsMgmtMsti, sapTlsMacMoveNextUpTime, sapTlsMacMoveRateExcdLeft, sapTlsL2ptForceBoundary, sapTlsLimitMacMoveLevel, sapTlsBpduTransOper, sapTlsDefMsapPolicy, sapTlsL2ptProtocols, sapTlsL2ptForceProtocols, sapTlsDhcpMsapTrigger, sapTlsDhcpProxyLeaseTime, sapTlsDhcpRemoteId, sapTlsMrpJoinTime, sapTlsMrpLeaveTime, sapTlsMrpLeaveAllTime, sapTlsMrpPeriodicTime, sapTlsMrpPeriodicEnabled, sapTlsPppoePolicy, sapTlsMrpPolicy, sapTlsSiteName, sapTlsDhcp6MsapTrigger } STATUS current DESCRIPTION "The group of objects supporting management of SAP TLS capabilities on Nokia SROS series systems release 15.0." ::= { tmnxSapGroups 510 } tmnxSapTlsEgrMcastObsoletedGroup OBJECT-GROUP OBJECTS { sapTlsEgressMcastGroup } STATUS current DESCRIPTION "The group of obsoleted sap egress multicast group objects on Nokia SROS series systems." ::= { tmnxSapGroups 511 } tmnxSapMsapV15v0Group OBJECT-GROUP OBJECTS { msapPlcyRowStatus, msapPlcyLastChanged, msapPlcyDescription, msapPlcyCpmProtPolicyId, msapPlcyCpmProtMonitorMac, msapPlcySubMgmtDefSubId, msapPlcySubMgmtDefSubIdStr, msapPlcySubMgmtDefSubProfile, msapPlcySubMgmtDefSlaProfile, msapPlcySubMgmtSubIdPlcy, msapPlcySubMgmtSubscriberLimit, msapPlcySubMgmtProfiledTrafOnly, msapPlcySubMgmtNonSubTrafSubId, msapPlcySubMgmtNonSubTrafSubProf, msapPlcySubMgmtNonSubTrafSlaProf, msapPlcySubMgmtDefInterDestId, msapPlcySubMgmtDefInterDestIdStr, msapPlcyAssociatedMsaps, msapPlcyIgmpTrkExpiryTime, msapPlcyIgmpTrkImportPlcy, msapPlcyIgmpTrkMaxNbrGrps, msapPlcyIgmpTrkMaxNbrSrcs, msapTlsPlcyLastChanged, msapTlsPlcySplitHorizonGrp, msapTlsPlcyArpReplyAgent, msapTlsPlcySubMgmtMacDaHashing, msapTlsPlcyDhcpLeasePopulate, msapTlsPlcyDhcpPrxyAdminState, msapTlsPlcyDhcpPrxyServAddr, msapTlsPlcyDhcpPrxyServAddrType, msapTlsPlcyDhcpPrxyLTRadOverride, msapTlsPlcyDhcpInfoAction, msapTlsPlcyDhcpCircuitId, msapTlsPlcyDhcpRemoteId, msapTlsPlcyDhcpRemoteIdString, msapTlsPlcyDhcpVendorInclOpts, msapTlsPlcyDhcpVendorOptStr, msapTlsPlcyDhcpPrxyLeaseTime, msapTlsPlcyIgmpSnpgImportPlcy, msapTlsPlcyIgmpSnpgFastLeave, msapTlsPlcyIgmpSnpgSendQueries, msapTlsPlcyIgmpSnpgGenQueryIntv, msapTlsPlcyIgmpSnpgQueryRespIntv, msapTlsPlcyIgmpSnpgRobustCount, msapTlsPlcyIgmpSnpgLastMembIntvl, msapTlsPlcyIgmpSnpgMaxNbrGrps, msapTlsPlcyIgmpSnpgMvrFromVplsId, msapTlsPlcyIgmpSnpgVersion, msapTlsPlcyIgmpSnpgMcacPlcyName, msapTlsPlcyIgmpSnpgMcacPrRsvMnBW, msapTlsPlcyIgmpSnpgMcacUncnstBW, msapTlsPlcyEgrQosPolicyId, msapL3PlcyEgrQosPolicyId, msapIgmpSnpgMcacLevelRowStatus, msapIgmpSnpgMcacLevelLastChanged, msapIgmpSnpgMcacLevelBW, msapIgmpSnpgMcacLagRowStatus, msapIgmpSnpgMcacLagLastChanged, msapIgmpSnpgMcacLagLevel, msapInfoCreationSapPortEncapVal, msapInfoCreationPlcyName, msapInfoReEvalPolicy, msapInfoLastChanged, msapCaptureSapStatsPktsRecvd, msapCaptureSapStatsPktsRedirect, msapCaptureSapStatsPktsDropped, msapPlcyTblLastChgd, msapTlsPlcyTblLastChgd, msapIgmpSnpgMcacLvlTblLastChgd, msapIgmpSnpgMcacLagTblLastChgd, msapInfoTblLastChgd } STATUS current DESCRIPTION "The group of objects supporting management of managed SAP capabilities on Nokia SROS series systems release 15.0." ::= { tmnxSapGroups 512 } tmnxMsapTlsEgrObsoletedGroup OBJECT-GROUP OBJECTS { msapTlsPlcyEgressMcastGroup } STATUS current DESCRIPTION "The group of obsoleted managed sap egress multicast group objects on Nokia SROS series systems." ::= { tmnxSapGroups 513 } tSapQosQGrpIngRedirectListGroup OBJECT-GROUP OBJECTS { sapIngQGrpRedirectList } STATUS current DESCRIPTION "The group of objects supporting management of SAP QoS ingress queue-group redirect list configuration on Nokia SROS series systems 15.0." ::= { tmnxSapGroups 514 } tSapQosQGrpEgrRedirectListGroup OBJECT-GROUP OBJECTS { sapEgrQGrpRedirectList } STATUS current DESCRIPTION "The group of objects supporting management of SAP QoS egress queue-group redirect list configuration on Nokia SROS series systems 15.0." ::= { tmnxSapGroups 515 } tSapIpTnlTcpMssAdjustV15v0Grp OBJECT-GROUP OBJECTS { tmnxIpTunnelPubTcpMssAdjust, tmnxIpTunnelPrivTcpMssAdjust } STATUS current DESCRIPTION "The group of objects supporting management of the IP tunnel TCP MSS adjustment capability on Nokia SROS series systems for release 15.0." ::= { tmnxSapGroups 516 } tmnxSapPlcrV15v0Group OBJECT-GROUP OBJECTS { sapIngPlcrCtrlOvrLastChgd, sapIngPlcrCtrlOvrLvlLastChgd, sapIngPlcrCtrlOvrLvlMBS, sapIngPlcrCtrlOvrLvlTblLastChgd, sapIngPlcrCtrlOvrMinMBSSep, sapIngPlcrCtrlOvrRowStatus, sapIngPlcrCtrlOvrTblLastChgd, sapIngPlcrOvrAdminCIR, sapIngPlcrOvrAdminPIR, sapIngPlcrOvrCBS, sapIngPlcrOvrPktOffset, sapIngPlcrOvrLastChgd, sapIngPlcrOvrMBS, sapIngPlcrOvrRowStatus, sapIngPlcrOvrStatMode, sapIngPlcrOvrTblLastChgd, sapEgrPlcrCtrlOvrLastChgd, sapEgrPlcrCtrlOvrLvlLastChgd, sapEgrPlcrCtrlOvrLvlMBS, sapEgrPlcrCtrlOvrLvlTblLastChgd, sapEgrPlcrCtrlOvrMinMBSSep, sapEgrPlcrCtrlOvrRowStatus, sapEgrPlcrCtrlOvrTblLastChgd, sapEgrPlcrOvrAdminCIR, sapEgrPlcrOvrAdminPIR, sapEgrPlcrOvrCBS, sapEgrPlcrOvrPktOffset, sapEgrPlcrOvrLastChgd, sapEgrPlcrOvrMBS, sapEgrPlcrOvrRowStatus, sapEgrPlcrOvrStatMode, sapEgrPlcrOvrTblLastChgd } STATUS obsolete DESCRIPTION "The group of objects supporting management of SAP Policer on Nokia SROS series systems." ::= { tmnxSapGroups 517 } tmnxSapQosHsWrrGrpOvrGroup OBJECT-GROUP OBJECTS { sapEgrQosHsWrrGrpTblLastChanged, sapEgrQosHsWrrGrpRowStatus, sapEgrQosHsWrrGrpLastChanged, sapEgrQosHsWrrGrpRate, sapEgrQosHsWrrGrpRatePercent, sapEgrQosHsWrrGrpClassWeight } STATUS current DESCRIPTION "The group of objects supporting management of the SAP egress Hs Wrr Group override feature on Nokia SROS series systems added in release 15.0." ::= { tmnxSapGroups 518 } sapEvpnMhEthSegV15v0Group OBJECT-GROUP OBJECTS { sapEvpnMHEthSegStatus } STATUS current DESCRIPTION "The group of objects supporting VXLAN MH feature on Nokia SROS series systems release 15.0." ::= { tmnxSapGroups 520 } tmnxSapQosQBurstLimitOvrGrp OBJECT-GROUP OBJECTS { sapEgrQosQBurstLimit } STATUS current DESCRIPTION "The group of objects supporting management of SAP egress QoS queue override feature on Nokia SROS series systems added in release 15.4." ::= { tmnxSapGroups 521 } sapPppoeRedirectGroup OBJECT-GROUP OBJECTS { sapFwdWhlSaleEpipeSvcId } STATUS current DESCRIPTION "The group of objects supporting PPPoE redirect on subscriber SAP feature on Nokia SROS series systems release 16.0." ::= { tmnxSapGroups 522 } tmnxIpTunnelV16v0Group OBJECT-GROUP OBJECTS { tmnxIpTunnelDeliverySvcName } STATUS current DESCRIPTION "The group of objects supporting IP tunnel feature on Nokia SROS series systems release 16.0." ::= { tmnxSapGroups 523 } tmnxSapQosPlcrOvrV15v1Group OBJECT-GROUP OBJECTS { sapIngPlcrCtrlOvrLastChgd, sapIngPlcrCtrlOvrLvlLastChgd, sapIngPlcrCtrlOvrLvlMBS, sapIngPlcrCtrlOvrLvlTblLastChgd, sapIngPlcrCtrlOvrMinMBSSep, sapIngPlcrCtrlOvrRowStatus, sapIngPlcrCtrlOvrTblLastChgd, sapIngPlcrOvrCBS, sapIngPlcrOvrPktOffset, sapIngPlcrOvrLastChgd, sapIngPlcrOvrMBS, sapIngPlcrOvrRowStatus, sapIngPlcrOvrStatMode, sapIngPlcrOvrTblLastChgd, sapEgrPlcrCtrlOvrLastChgd, sapEgrPlcrCtrlOvrLvlLastChgd, sapEgrPlcrCtrlOvrLvlMBS, sapEgrPlcrCtrlOvrLvlTblLastChgd, sapEgrPlcrCtrlOvrMinMBSSep, sapEgrPlcrCtrlOvrRowStatus, sapEgrPlcrCtrlOvrTblLastChgd, sapEgrPlcrOvrCBS, sapEgrPlcrOvrPktOffset, sapEgrPlcrOvrLastChgd, sapEgrPlcrOvrMBS, sapEgrPlcrOvrRowStatus, sapEgrPlcrOvrStatMode, sapEgrPlcrOvrTblLastChgd, sapIngPlcrOvrAdminPIRHi, sapIngPlcrOvrAdminPIRLo, sapIngPlcrOvrAdminCIRHi, sapIngPlcrOvrAdminCIRLo, sapEgrPlcrOvrAdminPIRHi, sapEgrPlcrOvrAdminPIRLo, sapEgrPlcrOvrAdminCIRHi, sapEgrPlcrOvrAdminCIRLo } STATUS current DESCRIPTION "The group of objects supporting management of SAP QoS policer override feature on Nokia SROS series systems release 15.1." ::= { tmnxSapGroups 524 } tmnxSapQosPlcrOvrObsoletedGroup OBJECT-GROUP OBJECTS { sapIngPlcrOvrAdminPIR, sapIngPlcrOvrAdminCIR, sapEgrPlcrOvrAdminPIR, sapEgrPlcrOvrAdminCIR } STATUS current DESCRIPTION "The group of obsoleted objects supporting management of SAP QoS policer override feature on Nokia SROS series systems release 15.1." ::= { tmnxSapGroups 525 } tmnxSapTemplateQosV16v0Group OBJECT-GROUP OBJECTS { sapTmplIngressQosPolicyName, sapTmplEgressQosPolicyName } STATUS current DESCRIPTION "The group of objects supporting management of SAP templates QoS feature on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 526 } tmnxSapTmplFilterNameV16v0Group OBJECT-GROUP OBJECTS { sapTmplIngressIpFilterName, sapTmplEgressIpFilterName, sapTmplIngressIpv6FilterName, sapTmplEgressIpv6FilterName, sapTmplIngressMacFilterName, sapTmplEgressMacFilterName } STATUS current DESCRIPTION "The group of objects supporting management of SAP templates Filter feature on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 527 } tmnxSapL2tpv3ExtGroup OBJECT-GROUP OBJECTS { sapL2tpv3ServiceName } STATUS current DESCRIPTION "The group of additional objects supporting management of the SAP L2TPV3 feature on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 528 } tmnxSapIngressQinqV16v0Group OBJECT-GROUP OBJECTS { sapIngressQinqTranslation, sapIngressQinqInnerTranslationId, sapIngressQinqOuterTranslationId } STATUS current DESCRIPTION "The group of objects supporting management of Qinq preserve and translation feature on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 529 } tmnxSapL2tpv3V16v0Group OBJECT-GROUP OBJECTS { sapL2tpv3TableLastChanged, sapL2tpv3RowStatus, sapL2tpv3LastChanged, sapL2tpv3ServiceId, sapL2tpv3RouterId, sapL2tpv3TunnelGroupName, sapL2tpv3VcId, sapL2tpv3PwType, sapL2tpv3AdminState, sapL2tpv3OperState, sapL2tpv3TunnelStatus, sapL2tpv3OperFlags, sapL2tpv3LastOperChgd, sapL2tpv3EthVlanQtag } STATUS current DESCRIPTION "The group of objects supporting management of the SAP L2TPV3 feature on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 530 } tmnxSapL2tpv3ObsoletedGroup OBJECT-GROUP OBJECTS { sapL2tpv3HostISA } STATUS current DESCRIPTION "The group of obsoleted objects supporting management of the SAP L2TPV3 feature on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 531 } tmnxSapPfcpV19v0Group OBJECT-GROUP OBJECTS { tmnxSapPfcpTableLastChanged, tmnxSapPfcpLastChanged, tmnxSapPfcpAssociation } STATUS current DESCRIPTION "The group of objects supporting management of Qinq preserve and translation feature on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 532 } tmnxSapBaseStatsAggregateGroup OBJECT-GROUP OBJECTS { sapBaseStatsIngAggregateOffPkts, sapBaseStatsIngAggregateOffOcts, sapBaseStatsIngAggregateFwdPkts, sapBaseStatsIngAggregateFwdOcts, sapBaseStatsEgrAggregateFwdPkts, sapBaseStatsEgrAggregateFwdOcts, sapBaseStatsIngAggregateDropPkts, sapBaseStatsIngAggregateDropOcts, sapBaseStatsEgrAggregateDropPkts, sapBaseStatsEgrAggregateDropOcts } STATUS current DESCRIPTION "The group of objects supporting management of aggregate SAP statistics on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 533 } tmnxSapOperStatusGroup OBJECT-GROUP OBJECTS { tmnxSapOperStatus, tmnxSapOperFlags } STATUS current DESCRIPTION "The group of objects supporting management of SAP operational information on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 534 } tmnxSapInfoV19v0Group OBJECT-GROUP OBJECTS { sapNumEntries, sapPortId, sapEncapValue, sapRowStatus, sapType, sapDescription, sapAdminStatus, sapOperStatus, sapIngressQosPolicyId, sapIngressMacFilterId, sapIngressIpFilterId, sapIngressVlanTranslationId, sapEgressQosPolicyId, sapEgressMacFilterId, sapEgressIpFilterId, sapMirrorStatus, sapIesIfIndex, sapLastMgmtChange, sapCollectAcctStats, sapAccountingPolicyId, sapVpnId, sapCustId, sapCustMultSvcSite, sapIngressQosSchedulerPolicy, sapEgressQosSchedulerPolicy, sapSplitHorizonGrp, sapIngressSharedQueuePolicy, sapIngressMatchQinQDot1PBits, sapLastStatusChange, sapAntiSpoofing, sapIngUseMultipointShared, sapEgressQinQMarkTopOnly, sapEndPoint, sapIngressVlanTranslation, sapSubType, sapCpmProtPolicyId, sapCpmProtMonitorMac, sapEgressFrameBasedAccounting, sapEthernetLLFAdminStatus, sapEthernetLLFOperStatus, sapTlsMvplsRowStatus, sapEgressFrameBasedAccounting, sapCallingStationId, sapIngPolicerPolicy, sapEgrPolicerPolicy, sapIpv6HostInfoIpoeDhcp6Hosts, sapIpv6HostInfoPppDhcp6Hosts, sapIpv6HostInfoPppSLAACHosts, sapIngQosQMBSBytes, sapEgrQosQMBSBytes, sapEgressQosEgrRemarkPlcy, sapMulticastSource } STATUS current DESCRIPTION "The group of objects supporting management of SAP capabilities for 19.0 release on Nokia SROS series systems." ::= { tmnxSapGroups 535 } tmnxSapOperObsoletedGroup OBJECT-GROUP OBJECTS { sapOperFlags } STATUS current DESCRIPTION "The group of obsoleted objects supporting management of the SAP operational status feature on Nokia SROS series systems in release 16.0." ::= { tmnxSapGroups 536 } tmnxSapBWGroup OBJECT-GROUP OBJECTS { sapBandwidthHi } STATUS current DESCRIPTION "The group of objects supporting management of the SAP operational status feature on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 537 } tmnxSapQtagV19v0Group OBJECT-GROUP OBJECTS { sapIngQtagManipulationOuterTag, sapIngQtagManipulationInnerTag, sapIngQtagManipulationAction, sapEgrQtagManipulationAction } STATUS current DESCRIPTION "The group of objects supporting management of the SAP q-tag manipulation on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 538 } tmnxSapVlanQosPlcyV19v0Group OBJECT-GROUP OBJECTS { sapEgressQosVlanQosPlcy } STATUS current DESCRIPTION "The group of objects supporting management of the SAP Vlan QoS Policy on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 539 } tmnxSapEgrAggRateCIRV19v0Group OBJECT-GROUP OBJECTS { sapEgressAggRateCIRLmt } STATUS current DESCRIPTION "The group of objects supporting management of the SAP Egress Aggregate Rate CIR on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 540 } tmnxSapIgPlcyPlcerStatV19v0Group OBJECT-GROUP OBJECTS { sapIngQosPStatsDrpExdProfPkts, sapIngQosPStatsDrpExdProfOcts } STATUS current DESCRIPTION "The group of objects supporting management of the SAP Ingress Policy policer stats for drop counters on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 541 } tmnxSapIngressAggRateV19v0Group OBJECT-GROUP OBJECTS { sapIngressAggregatePolicerRateLo, sapIngressAggregatePolicerRateHi, sapIngressAggregatePolicerBurst } STATUS current DESCRIPTION "The group of objects supporting management of the SAP Ingress Aggregate Rate on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 542 } tmnxIpTunnelEsaVmV19v0Group OBJECT-GROUP OBJECTS { tmnxIpTunnelHostEsa, tmnxIpTunnelHostEsaVm } STATUS current DESCRIPTION "The group of objects supporting management of IP tunnel functions on ESA virtual machines in release 19.0" ::= { tmnxSapGroups 543 } sapNotifyObjsPortStateGroup OBJECT-GROUP OBJECTS { sapNotifyPortState } STATUS current DESCRIPTION "The group of objects supporting notifications of the state of the port on Nokia SROS systems." ::= { tmnxSapGroups 544 } tmnxSapQosStatsV19v0Group OBJECT-GROUP OBJECTS { sapEgrQosQStatsFwdExdProfPkts, sapEgrQosQStatsDrpExdProfPkts, sapEgrQosQStatsFwdExdProfOcts, sapEgrQosQStatsDrpExdProfOcts, sapEgrQosQStatsFwdInPlusProfPkts, sapEgrQosQStatsDrpInPlusProfPkts, sapEgrQosQStatsFwdInPlusProfOcts, sapEgrQosQStatsDrpInPlusProfOcts, sapEgrQosQStatsFwdPkts, sapEgrQosQStatsDrpPkts, sapEgrQosQStatsFwdOcts, sapEgrQosQStatsDrpOcts } STATUS current DESCRIPTION "The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Nokia SROS series systems in release 19.0." ::= { tmnxSapGroups 545 } sapNotifyV20v0Group NOTIFICATION-GROUP NOTIFICATIONS { sapReceivedPbbProtSrcMac } STATUS current DESCRIPTION "The group notification supporting Auto learn mac protect feature for EVPN feature on Nokia SROS series systems release 20.0." ::= { tmnxSapGroups 546 } sapTlsMacListV20v0Group OBJECT-GROUP OBJECTS { sapTlsAutoLrnMacProtectExcList } STATUS current DESCRIPTION "The group of objects supporting management of the auto learn Mac list exclusion feature on Nokia SROS series systems in release 20.0." ::= { tmnxSapGroups 547 } sapTlsBgpVplsEvpnV20v0Group OBJECT-GROUP OBJECTS { sapTlsExBgpVplsMhVeId } STATUS current DESCRIPTION "The group of objects supporting management of the BGP-VPLS EVPN interworking feature on Nokia SROS series systems in release 20.0." ::= { tmnxSapGroups 548 } tmnxSapStickyMsapV20v0Group OBJECT-GROUP OBJECTS { msapPlcyStickyTimeout, msapInfoStickyExpiryTime } STATUS current DESCRIPTION "The group of objects supporting management of sticky managed SAPs on Nokia SROS release 20 series systems." ::= { tmnxSapGroups 549 } tmnxSapEgrQMonQDepthV20v0Group OBJECT-GROUP OBJECTS { sapEgrQosQMonitorQueueDepth, sapEgrQosQFastPolling, sapEgrQosQViolationThreshold, sapEgrQosQueueDepthViolTotCnt, sapEgrQosQueueDepthViolLast, sapEgrQosQueueDepthHWMPollInt } STATUS current DESCRIPTION "The group of objects supporting Faster Polling Queue Depth Monitoring with Telemetry on Nokia SROS release 20 series systems." ::= { tmnxSapGroups 550 } sapIngTrtcm2AggRateV20v10Group OBJECT-GROUP OBJECTS { sapIngressAggregatePolicerCIRHi, sapIngressAggregatePolicerCIRLo, sapIngressAggregatePolicerCBS } STATUS current DESCRIPTION "The group of objects supporting management of the SAP Ingress trtcm2 aggregate policers on Nokia SROS series systems in release 20.10." ::= { tmnxSapGroups 551 } tmnxIpTnlTransProfV21v0Group OBJECT-GROUP OBJECTS { tmnxIpTunnelIPsecTransportMdProf, tmnxIpTnlIPsecIsakmpState, tmnxIpTnlIPsecIsakmpEstabTime, tmnxIpTnlIPsecIsakmpNegLifeTime, tmnxIpTnlIPsecNumDpdTx, tmnxIpTnlIPsecNumDpdRx, tmnxIpTnlIPsecNumDpdAckTx, tmnxIpTnlIPsecNumDpdAckRx, tmnxIpTnlIPsecNumExpRx, tmnxIpTnlIPsecNumInvalidDpdRx, tmnxIpTnlIPsecNumCtrlPktsTx, tmnxIpTnlIPsecNumCtrlPktsRx, tmnxIpTnlIPsecNumCtrlTxErrors, tmnxIpTnlIPsecNumCtrlRxErrors, tmnxIpTnlIPsecMatCertEntryId, tmnxIpTnlIPsecCertProfName, tmnxIpTnlIPsecIsakmpPathMtu, tmnxIpTnlIPsecStatIsakmpAuthAlg, tmnxIpTnlIPsecStatIsakmpEncrAlg, tmnxIpTnlIPsecStatIsakmpPfsDhGp, tmnxIpTnlIPsecStatIkeTranPrfAlg, tmnxIpTnlIPsecMatchTrustAnchor, tmnxIpTnlIPsecSAType, tmnxIpTnlIPsecSASpi, tmnxIpTnlIPsecSAAuthAlgorithm, tmnxIpTnlIPsecSAEncrAlgorithm, tmnxIpTnlIPsecSAEstablishedTime, tmnxIpTnlIPsecSANegLifeTime, tmnxIpTnlIPsecSAStBytesProcessed, tmnxIpTnlIPsecSAStBytesProcLow32, tmnxIpTnlIPsecSAStBytesProcHgh32, tmnxIpTnlIPsecSAStPktsProcessed, tmnxIpTnlIPsecSAStPktsProcLow32, tmnxIpTnlIPsecSAStPktsProcHigh32, tmnxIpTnlIPsecSAStCryptoErrors, tmnxIpTnlIPsecSAStReplayErrors, tmnxIpTnlIPsecSAStSAErrors, tmnxIpTnlIPsecSAStPolicyErrors, tmnxIpTnlIPsecSAStEncapOverhead, tmnxIpTnlIPsecSAStPfsDhGroup, tmnxIpTnlIPsecSAStESN } STATUS current DESCRIPTION "The group of objects supporting management of the IPsec transport mode on Nokia SROS series systems in release 21.0." ::= { tmnxSapGroups 552 } sapCfmSquelchInCtagGroup OBJECT-GROUP OBJECTS { sapEthCfmSquelchIngressCtag, sapTmplEthCfmSquelchIngressCtag } STATUS current DESCRIPTION "The group of objects supporting Ethernet Connectivity Fault Management (ETH-CFM) SAP squelching for the PVLAN space on Nokia SROS series systems." ::= { tmnxSapGroups 553 } sapIngressIPCritOvrV20v10Group OBJECT-GROUP OBJECTS { sapIngressIPCriteriaOvrTag, sapIngressIPv6CriteriaOvrTag } STATUS current DESCRIPTION "The group of objects supporting IP Criteria overrides for SAP ingress on Nokia SROS series systems." ::= { tmnxSapGroups 554 } sapHsmdaObsoleteV21v0Group OBJECT-GROUP OBJECTS { sapEgressHsmdaShaperOverride, sapEgressHsmdaPacketOffOverride, sapEgrQosHsmdaQueueRowStatus, sapEgrQosHsmdaQueueLastChanged, sapEgrQosHsmdaQueueAdminPIR, sapEgrQosHsmdaQueueAdminCIR, sapEgrQosHsmdaQueueSlopePolicy, sapEgrHsmdaQStatCustId, sapEgrHsmdaQStatInProfPktFwd, sapEgrHsmdaQStatInProfPktDropd, sapEgrHsmdaQStatOutProfPktFwd, sapEgrHsmdaQStatOutProfPktDropd, sapEgrHsmdaQStatInProfOctFwd, sapEgrHsmdaQStatInProfOctDropd, sapEgrHsmdaQStatOutProfOctFwd, sapEgrHsmdaQStatOutProfOctDropd, sapEgrHsmdaCntrStCustId, sapEgrHsmdaCntrStInProfPktFwd, sapEgrHsmdaCntrStInProfPktDrop, sapEgrHsmdaCntrStOutProfPktFwd, sapEgrHsmdaCntrStOutProfPktDrop, sapEgrHsmdaCntrStInProfOctFwd, sapEgrHsmdaCntrStInProfOctDrop, sapEgrHsmdaCntrStOutProfOctFwd, sapEgrHsmdaCntrStOutProfOctDrop, sapEgrQosHsmdaQueueMBS, sapEgrQosHsmdaQueueWrrWeight, sapEgressHsmdaWrrPolicyOvr } STATUS current DESCRIPTION "The group of objects supporting management of SAP Egress QOS Hsmda capabilities on Nokia SROS series systems release 9.0." ::= { tmnxSapGroups 556 } sapQueueOvrObsoleteV21v0Group OBJECT-GROUP OBJECTS { sapEgrQosQMonitorDepth } STATUS current DESCRIPTION "The group of objects supporting management of QOS queue-overrides capabilities on Nokia SROS series systems release 13.0." ::= { tmnxSapGroups 557 } tmnxSapQueueOvrV21v0Group OBJECT-GROUP OBJECTS { sapIngQosQMonitorDepth, sapIngQosQueueDepthPollPrcnt1, sapIngQosQueueDepthPollPrcnt2, sapIngQosQueueDepthPollPrcnt3, sapIngQosQueueDepthPollPrcnt4, sapIngQosQueueDepthPollPrcnt5, sapIngQosQueueDepthPollPrcnt6, sapIngQosQueueDepthPollPrcnt7, sapIngQosQueueDepthPollPrcnt8, sapIngQosQueueDepthPollPrcnt9, sapIngQosQueueDepthPollPrcnt10, sapIngQosQueueDepthAvgPollInt, sapIngQosQueueDepthAvgElpsdTme, sapEgrQosQueueDepthPollPrcnt1, sapEgrQosQueueDepthPollPrcnt2, sapEgrQosQueueDepthPollPrcnt3, sapEgrQosQueueDepthPollPrcnt4, sapEgrQosQueueDepthPollPrcnt5, sapEgrQosQueueDepthPollPrcnt6, sapEgrQosQueueDepthPollPrcnt7, sapEgrQosQueueDepthPollPrcnt8, sapEgrQosQueueDepthPollPrcnt9, sapEgrQosQueueDepthPollPrcnt10, sapEgrQosQueueDepthAvgPollInt, sapEgrQosQueueDepthAvgElpsdTme } STATUS obsolete DESCRIPTION "The group of objects supporting QoS queue-overrides on SAP in release 21.0 of Nokia SROS series systems." ::= { tmnxSapGroups 558 } tmnxSapIngQMonQDepthV21v0Group OBJECT-GROUP OBJECTS { sapIngQosQMonitorQueueDepth, sapIngQosQFastPolling } STATUS current DESCRIPTION "The group of objects supporting Faster Polling Queue Depth Monitoring with Telemetry on Nokia SROS release 21 series systems." ::= { tmnxSapGroups 559 } sapLastChangeV21v0Group OBJECT-GROUP OBJECTS { sapBaseTableLastChanged, sapTlsTableLastChanged, sapTlsLastMgmtChange } STATUS current DESCRIPTION "The group of objects supporting last-change objs on Nokia SROS release 21 series systems." ::= { tmnxSapGroups 560 } tmnxSapEgressHQosV21v0Group OBJECT-GROUP OBJECTS { sapEgrVlanQosPlcyPortRedirect } STATUS current DESCRIPTION "The group of objects supporting HQos on Nokia SROS release 21 series systems." ::= { tmnxSapGroups 561 } tmnxSapSubV21v0Group OBJECT-GROUP OBJECTS { tmnxSapSubMonOperGrpTableLastCh, tmnxSapSubMonOperGrpRowStatus, tmnxSapSubMonOperGrpLastCh, tmnxSapSubMonOperGrpHlthDrop, tmnxSapSubMonOperGrpActHlthDrop, tmnxSapPfcpL2AccessIdAlias } STATUS current DESCRIPTION "The group of objects supporting subscriber management added on Nokia SROS release 21 series systems." ::= { tmnxSapGroups 562 } sapIPFilterPairV22v0Group OBJECT-GROUP OBJECTS { sapIngressIpFilterPair } STATUS current DESCRIPTION "The group of objects supporting management of hardware aggregate shaping for SAP egress on Nokia SROS series systems." ::= { tmnxSapGroups 563 } sapQueueOvrObsoleteV22v0Group OBJECT-GROUP OBJECTS { sapIngQosQMonitorDepth } STATUS current DESCRIPTION "The group of objects supporting management of QOS queue-overrides capabilities on Nokia SROS series systems release 13.0." ::= { tmnxSapGroups 564 } tmnxSapQueueOvrV22v0Group OBJECT-GROUP OBJECTS { sapIngQosQueueDepthPollPrcnt1, sapIngQosQueueDepthPollPrcnt2, sapIngQosQueueDepthPollPrcnt3, sapIngQosQueueDepthPollPrcnt4, sapIngQosQueueDepthPollPrcnt5, sapIngQosQueueDepthPollPrcnt6, sapIngQosQueueDepthPollPrcnt7, sapIngQosQueueDepthPollPrcnt8, sapIngQosQueueDepthPollPrcnt9, sapIngQosQueueDepthPollPrcnt10, sapIngQosQueueDepthAvgPollInt, sapIngQosQueueDepthAvgElpsdTme, sapEgrQosQueueDepthPollPrcnt1, sapEgrQosQueueDepthPollPrcnt2, sapEgrQosQueueDepthPollPrcnt3, sapEgrQosQueueDepthPollPrcnt4, sapEgrQosQueueDepthPollPrcnt5, sapEgrQosQueueDepthPollPrcnt6, sapEgrQosQueueDepthPollPrcnt7, sapEgrQosQueueDepthPollPrcnt8, sapEgrQosQueueDepthPollPrcnt9, sapEgrQosQueueDepthPollPrcnt10, sapEgrQosQueueDepthAvgPollInt, sapEgrQosQueueDepthAvgElpsdTme } STATUS current DESCRIPTION "The group of objects supporting QoS queue-overrides on SAP in release 22.0 of Nokia SROS series systems." ::= { tmnxSapGroups 565 } tmnxSapStaticHostV22v0Group OBJECT-GROUP OBJECTS { sapStaticHostMRtMetric, sapStaticHostMRtPreference, sapStaticHostMRtTag, sapStatHost6MRtPreference, sapStatHost6MRtTag } STATUS current DESCRIPTION "The group of objects supporting management of SAP static hosts added in release 22 of the Nokia SROS series systems." ::= { tmnxSapGroups 566 } tmnxDCSapCompliances OBJECT IDENTIFIER ::= { tmnxSapConformance 3 } tmnxDCSapGroups OBJECT IDENTIFIER ::= { tmnxSapConformance 4 } tmnxMgSapCompliances OBJECT IDENTIFIER ::= { tmnxSapConformance 5 } tmnxMgSapGroups OBJECT IDENTIFIER ::= { tmnxSapConformance 6 } sapTrapsPrefix OBJECT IDENTIFIER ::= { tmnxServNotifications 3 } sapTraps OBJECT IDENTIFIER ::= { sapTrapsPrefix 0 } sapCreated NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue } STATUS obsolete DESCRIPTION "This trap is sent when a new row is created in the sapBaseInfoTable." ::= { sapTraps 1 } sapDeleted NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue } STATUS obsolete DESCRIPTION "This trap is sent when an existing row is deleted from the sapBaseInfoTable." ::= { sapTraps 2 } sapStatusChanged NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, sapAdminStatus, tmnxSapOperStatus, tmnxSapOperFlags } STATUS current DESCRIPTION "The sapStatusChanged notification is generated when there is a change in the administrative or operating status of an SAP. Notice that this trap is not generated whenever the SAP operating status change is caused by an operating status change on the associated access port." ::= { sapTraps 3 } sapTlsMacAddrLimitAlarmRaised NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue } STATUS current DESCRIPTION "The trap sapTlsMacAddrLimitAlarmRaised is sent whenever the number of MAC addresses stored in the FDB for this SAP increases to reach the watermark specified by the object svcTlsFdbTableFullHighWatermark." ::= { sapTraps 4 } sapTlsMacAddrLimitAlarmCleared NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue } STATUS current DESCRIPTION "The trap sapTlsMacAddrLimitAlarmCleared is sent whenever the number of MAC addresses stored in the FDB for this SAP drops to the watermark specified by the object svcTlsFdbTableFullLowWatermark." ::= { sapTraps 5 } sapTlsDHCPLseStEntriesExceeded NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, tlsDhcpLseStateNewCiAddr, tlsDhcpLseStateNewChAddr, tlsDHCPClientLease } STATUS obsolete DESCRIPTION "The sapTlsDHCPLseStEntriesExceeded notification is generated when the number of DHCP lease states entries on a given SAP reaches a user configurable upper limit given by sapTlsDhcpLeasePopulate." ::= { sapTraps 6 } sapTlsDHCPLeaseStateOverride NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, tlsDhcpLseStateNewCiAddr, tlsDhcpLseStateNewChAddr, tlsDhcpLseStateOldCiAddr, tlsDhcpLseStateOldChAddr } STATUS obsolete DESCRIPTION "The sapTlsDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address." ::= { sapTraps 7 } sapTlsDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, tlsDhcpPacketProblem } STATUS obsolete DESCRIPTION "The sapTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content." ::= { sapTraps 8 } sapDHCPLeaseEntriesExceeded NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpClientLease } STATUS current DESCRIPTION "The sapDHCPLeaseEntriesExceeded notification is generated when the number of DHCP lease state entries on a given SAP reaches a user configurable upper limit. This limit is given by sapTlsDhcpLeasePopulate for a TLS service and by TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate for an IES or VPRN service." ::= { sapTraps 9 } sapDHCPLseStateOverride NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpLseStateOldCiAddr, svcDhcpLseStateOldChAddr } STATUS current DESCRIPTION "The sapDHCPLseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address." ::= { sapTraps 10 } sapDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcDhcpPacketProblem } STATUS current DESCRIPTION "The sapDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content." ::= { sapTraps 11 } sapDHCPLseStatePopulateErr NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcDhcpLseStatePopulateError } STATUS current DESCRIPTION "The sapDHCPLseStatePopulateErr notification indicates that the system was unable to update the DHCP Lease State table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded." ::= { sapTraps 12 } hostConnectivityLost NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, hostConnectivityCiAddrType, hostConnectivityCiAddr, hostConnectivityChAddr, sapNotifyIpAddrType, sapNotifyIpAddr } STATUS current DESCRIPTION "The hostConnectivityLost notification indicates that the system lost the connectivity with the indicated host. The value of hostConnectivityCiAddr is the nominal IP address that identifies the host. The value of sapNotifyIpAddr is the IP address that was actually used for the host connectivity verification; the two may be different for a host with multiple IP addresses." ::= { sapTraps 13 } hostConnectivityRestored NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, hostConnectivityCiAddrType, hostConnectivityCiAddr, hostConnectivityChAddr, sapNotifyIpAddrType, sapNotifyIpAddr } STATUS current DESCRIPTION "The hostConnectivityRestored notification indicates that the system has restored the connectivity with the indicated host. The value of hostConnectivityCiAddr is the nominal IP address that identifies the host. The value of sapNotifyIpAddr is the IP address that was actually used for the host connectivity verification; the two may be different for a host with multiple IP addresses." ::= { sapTraps 14 } sapReceivedProtSrcMac NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, protectedMacForNotify, sapTlsRestProtSrcMacAction } STATUS current DESCRIPTION "The sapReceivedProtSrcMac notification is generated when a protected source MAC is received on a TLS SAP with sapTlsRestProtSrcMac 'true', or if the TLS SAP belongs to an SHG with tlsShgRestProtSrcMac 'true'." ::= { sapTraps 15 } sapStaticHostDynMacConflict NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, staticHostDynamicMacIpAddress, staticHostDynamicMacConflict } STATUS current DESCRIPTION "The sapStaticHostDynMacConflict notification indicates that the system is trying to learn a conflicting IP-only static host dynamic MAC address (sapStaticHostDynMacAddress)." ::= { sapTraps 16 } sapTlsMacMoveExceeded NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, sapAdminStatus, sapOperStatus, sapTlsMacMoveRateExcdLeft, sapTlsMacMoveNextUpTime, svcTlsMacMoveMaxRate, sapTlsNotifyMacAddr } STATUS current DESCRIPTION "The sapTlsMacMoveExceeded notification is generated when the SAP exceeds the TLS svcTlsMacMoveMaxRate." ::= { sapTraps 17 } sapDHCPProxyServerError NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcDhcpProxyError } STATUS current DESCRIPTION "The sapDHCPProxyServerError notification indicates that the system was unable to proxy DHCP requests." ::= { sapTraps 18 } sapDHCPCoAError NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcDhcpCoAError } STATUS obsolete DESCRIPTION "The sapDHCPCoAError notification indicates that the system was unable to process a Change of Authorization (CoA) request from a Radius server." ::= { sapTraps 19 } sapDHCPSubAuthError NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcDhcpSubAuthError } STATUS obsolete DESCRIPTION "The sapDHCPSubAuthError notification indicates that the system encountered a problem while trying to authenticate a subscriber." ::= { sapTraps 20 } sapPortStateChangeProcessed NOTIFICATION-TYPE OBJECTS { sapNotifyPortId, sapNotifyPortState } STATUS current DESCRIPTION "The sapPortStateChangeProcessed notification indicates that the agent has finished processing an access port state change event, and that the operating status of all the affected SAPs has been updated accordingly. The value of the sapNotifyPortId object indicates the ID of the port that experienced the state change. The value of the sapNotifyPortState object indicates the current state of the port." ::= { sapTraps 21 } sapDHCPLseStateMobilityError NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue } STATUS current DESCRIPTION "The sapDHCPLseStateMobilityError notification indicates that the system was unable to perform a mobility check for this lease state." ::= { sapTraps 22 } sapCemPacketDefectAlarm NOTIFICATION-TYPE OBJECTS { custId, svcVpnId, sapCemReportAlarmStatus, tmnxPortCemStatsReportAlarm } STATUS current DESCRIPTION "Generated when a CEM SAP alarm condition is detected. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' persists over a 3 second window. tmnxPortCemStatsReportAlarm specifies, in the case of APS Ports, the physical port raising the trap, otherwise it is the SAP's port." ::= { sapTraps 23 } sapCemPacketDefectAlarmClear NOTIFICATION-TYPE OBJECTS { custId, svcVpnId, sapCemReportAlarmStatus, tmnxPortCemStatsReportAlarm } STATUS current DESCRIPTION "Generated when a CEM SAP alarm condition is cleared. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' no longer persists over a 10 second window. tmnxPortCemStatsReportAlarm specifies, in the case of APS Ports, the physical port raising the trap, otherwise it is the SAP's port." ::= { sapTraps 24 } msapStateChanged NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, msapStatus } STATUS current DESCRIPTION "The msapStateChanged notification is generated when a Managed SAP is 'created', 'modified', or 'deleted', with the value of msapStatus indicated which state it has entered." ::= { sapTraps 25 } msapCreationFailure NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcManagedSapCreationError, sapNotifyPortId, sapNotifyEncapValue, sapTlsNotifyMacAddr } STATUS current DESCRIPTION "The trap msapCreationFailure is sent whenever the system fails to create a managed SAP. The svcId, svcVpnId, sapPortId and sapEncapValue are those of the capturing SAP. The values of sapNotifyPortId and sapNotifyEncapValue correspond to the managed SAP, and the value of sapTlsNotifyMacAddr is the MAC address that would have been associated with the managed SAP, if the creation would have succeeded." ::= { sapTraps 26 } sapHostBGPPeeringSetupFailed NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, sapBGPPeeringHostIpAddr, sapBGPPeeringHostIpAddrType, sapBGPPeeringVRtrID, sapBGPPeeringAttrDiscarded, sapBGPPeeringNotifDescription } STATUS current DESCRIPTION "The sapHostBGPPeeringSetupFailed notification indicates that the system was unable to create a BGP neighbor and set up BGP peering for the given host." ::= { sapTraps 27 } sapTlsDataSapInstStatusChgd NOTIFICATION-TYPE OBJECTS { sapTlsDataSapInstStatus, sapTlsDataSapInstLastErr } STATUS current DESCRIPTION "The sapTlsDataSapInstStatusChgd notification is generated when there is a change in the value of sapTlsDataSapInstStatus object. sapTlsDataSapInstLastErr provides information related to sapTlsDataSapInstStatus object." ::= { sapTraps 28 } tmnxGreTunnelOperRemIpChg NOTIFICATION-TYPE OBJECTS { tmnxGreTunnelOperRemIpAddrType, tmnxGreTunnelOperRemIpAddr } STATUS obsolete DESCRIPTION "[CAUSE] The tmnxGreTunnelOperRemIpChg notification is generated when there is a change in operational remote address 'tmnxGreTunnelOperRemIpAddr' of the tunnel. [EFFECT] Operational state of the tunnel is not affected. [RECOVERY] Operator needs to look at the configuration of tmnxGreTunnelRemIpAddr and tmnxGreTunnelBackupRemIpAddr." ::= { sapTraps 29 } sapTunnelStateChange NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, sapTunnelNotifyName, sapTunnelNotifyState, sapTunnelNotifyReason } STATUS current DESCRIPTION "[CAUSE] The sapTunnelStateChange notification is generated when IPsec/GRE tunnel indicated by sapTunnelNotifyName changes state to 'down' due to sapTunnelNotifyReason. [EFFECT] IPsec/GRE tunnel associated with the SAP will remain in this state until a corrective action is taken. [RECOVERY] Depending on the reason indicated by sapTunnelNotifyReason, corrective action should be taken." ::= { sapTraps 30 } sapAtmPppSessionFailure NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, sapNotifyName, sapNotifyReason } STATUS current DESCRIPTION "[CAUSE] The sapAtmPppSessionFailure notification indicates that the system could not create a new PPPoA session. The problem is described in the object sapNotifyReason. The PPP user name is specified in the sapNotifyName. [EFFECT] The user that attempted to set up the PPP session cannot establish the desired connection. [RECOVERY] Depending on the reason indicated by sapNotifyReason, corrective action may be necessary. However, it is possible that the failure is caused by the user's equipment configuration or by erroneous input by the user." ::= { sapTraps 31 } sapAtmPppNcpFailure NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, sapNotifyName, sapPppNcpFailureProtocol, sapNotifyReason } STATUS current DESCRIPTION "[CAUSE] The sapAtmPppNcpFailure notification indicates that there is a NCP phase setup problem. The problem is described in the object sapNotifyReason. The PPP user name is specified in the sapNotifyName. [EFFECT] The IP protocol cannot be configured for the user that attempted to set up the PPP session. [RECOVERY] Depending on the reason indicated by sapNotifyReason, corrective action may be necessary. However, it is possible that the failure is caused by the user's equipment configuration or by erroneous input by the user." ::= { sapTraps 32 } sapIpipeCeIpAddrChange NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue, sapIpipeCeIpAddrType, sapIpipeCeIpAddress } STATUS current DESCRIPTION "[CAUSE] The sapIpipeCeIpAddrChange notification indicates that an IP address has been discovered for the local end host of a specified IPIPE SAP. The IP address type is specified by sapIpipeCeIpAddrType. The IP address is specified by sapIpipeCeIpAddress. [EFFECT] The IP address specified by sapIpipeCeIpAddress and of type sapIpipeCeIpAddrType has been discovered for the local end host. [RECOVERY] No action is required" ::= { sapTraps 33 } tmnxIpTunnelOperRemIpChg NOTIFICATION-TYPE OBJECTS { tmnxIpTunnelOperRemIpAddrType, tmnxIpTunnelOperRemIpAddr } STATUS current DESCRIPTION "[CAUSE] The tmnxIpTunnelOperRemIpChg notification is generated when there is a change in operational remote address 'tmnxIpTunnelOperRemIpAddr' of the tunnel. [EFFECT] Operational state of the tunnel is not affected. [RECOVERY] Operator needs to look at the configuration of tmnxIpTunnelRemIpAddr and tmnxIpTunnelBackupRemIpAddr." ::= { sapTraps 38 } sapDcpStaticExcd NOTIFICATION-TYPE OBJECTS { sapDcpFpStaticExcdCountHi, sapDcpFpStaticExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpStaticExcd notification is generated when the static-policer on a particular SAP has been detected as non-conformant to the associated distributed CPU protection policy parameters. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured to 'enable' or 'verbose'. [EFFECT] The affected SAP may be using more resources than expected and cause the system to underperform. This notification may indicate a Denial of Service attack or a misconfiguration in the network. [RECOVERY] Appropriate configuration changes to the distributed CPU protection policy or to the affected SAP may be required." ::= { sapTraps 39 } sapDcpDynamicExcd NOTIFICATION-TYPE OBJECTS { sapDcpFpDynExcdCountHi, sapDcpFpDynExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpDynamicExcd notification is generated when the protocol on a particular SAP has been detected as non-conformant to the associated distributed CPU protection policy parameters. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is configured to 'enable' or 'verbose'. [EFFECT] The affected SAP may be using more resources than expected and cause the system to underperform. This notification may indicate a Denial of Service attack or a misconfiguration in the network. [RECOVERY] Appropriate configuration changes to the distributed CPU protection policy or to the affected SAP may be required." ::= { sapTraps 40 } sapDcpStaticHoldDownStart NOTIFICATION-TYPE OBJECTS { sapDcpFpStaticExcdCountHi, sapDcpFpStaticExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpStaticHoldDownStart notification is generated when a particular SAP starts hold-down period for an exceeding static-policer. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured to 'verbose'. [EFFECT] The static-policer will treat all packets as non-conformant during the hold-down period. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 41 } sapDcpDynamicHoldDownStart NOTIFICATION-TYPE OBJECTS { sapDcpFpDynExcdCountHi, sapDcpFpDynExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpDynamicHoldDownStart notification is generated when a particular SAP starts hold-down period for an exceeding protocol. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is configured to 'verbose'. [EFFECT] The protocol will treat all packets as non-conformant during the hold-down period. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 42 } sapDcpStaticHoldDownEnd NOTIFICATION-TYPE OBJECTS { sapDcpFpStaticExcdCountHi, sapDcpFpStaticExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpStaticHoldDownEnd notification is generated when a particular SAP completes hold-down period for an exceeding static-policer. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured to 'verbose'. [EFFECT] The static-policer for an affected SAP will transition to a detection-time countdown after the hold-down period is complete. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 43 } sapDcpDynamicHoldDownEnd NOTIFICATION-TYPE OBJECTS { sapDcpFpDynExcdCountHi, sapDcpFpDynExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpDynamicHoldDownEnd notification is generated when a particular SAP completes hold-down period for an exceeding protocol. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is configured to 'verbose'. [EFFECT] The protocol for an affected SAP will transition to a detection-time countdown after the hold-down period is complete. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 44 } sapDcpStaticConform NOTIFICATION-TYPE OBJECTS { sapDcpFpStaticExcdCountHi, sapDcpFpStaticExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpStaticConform notification is generated when the static-policer for a particular SAP has been detected as conformant for a period of the configured detection-time after having been previously detected as exceeding and completed any hold-down period. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured to 'enable' or 'verbose'. [EFFECT] The affected SAP is now in conformance with the parameters configured for the associated distributed CPU protection policy. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 45 } sapDcpDynamicConform NOTIFICATION-TYPE OBJECTS { sapDcpFpDynExcdCountHi, sapDcpFpDynExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpDynamicConform notification is generated when the protocol for a particular SAP has been detected as conformant for a period of the configured detection-time after having been previously detected as exceeding and completed any hold-down period. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured to 'enable' or 'verbose'. [EFFECT] The affected SAP is now in conformance with the parameters configured for the associated distributed CPU protection policy. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 46 } sapDcpLocMonExcd NOTIFICATION-TYPE OBJECTS { sapDcpFpLocMonExcdCountHi, sapDcpFpLocMonExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpLocMonExcd notification is generated when the local-monitoring-policer for a particular SAP has transitioned from a conformant state to a non-conformant state and the system will attempt to allocate dynamic enforcement policers. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is configured to 'verbose'. [EFFECT] The affected SAP may be using more resources than expected and cause the system to underperform. This notification may indicate a Denial of Service attack or a misconfiguration in the network. [RECOVERY] Appropriate configuration changes to the distributed CPU protection policy or to the affected SAP may be required." ::= { sapTraps 47 } sapDcpLocMonExcdDynResource NOTIFICATION-TYPE OBJECTS { sapDcpFpLocMonExcdCountHi, sapDcpFpLocMonExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpLocMonExcdDynResource notification is generated when the local-monitoring-policer for a particular SAP has transitioned from a conformant state to a non-conformant state and the system cannot allocate all the dynamic enforcements policers associated with the distributed CPU protection policy . This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is configured to 'enable' or 'verbose'. [EFFECT] The affected SAP may be using more resources than expected and cause the system to underperform. This notification may indicate a Denial of Service attack or a misconfiguration in the network. [RECOVERY] Appropriate configuration changes to the distributed CPU protection policy or to the affected SAP or to the dynamic enforcement policer pool(TIMETRA-CHASSIS-MIB.mib::tmnxFPDCpuProtDynEnfrcPlcrPool)." ::= { sapTraps 48 } sapDcpLocMonExcdAllDynAlloc NOTIFICATION-TYPE OBJECTS { sapDcpFpLocMonExcdCountHi, sapDcpFpLocMonExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpLocMonExcdAllDynAlloc notification is generated when all dynamic enforcement policers associated with a non-conformant local-monitoring-policer have been successfully allocated for a particular SAP. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is configure to 'verbose'. [EFFECT] The affected SAP may be using more resources than expected and cause the system to underperform. [RECOVERY] Appropriate configuration changes to the distributed CPU protection policy or to the affected SAP may be required." ::= { sapTraps 49 } sapDcpLocMonExcdAllDynFreed NOTIFICATION-TYPE OBJECTS { sapDcpFpLocMonState, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpLocMonExcdAllDynFreed notification is generated for a particular SAP when all the previously allocated dynamic enforcement policers for a particular local-monitoring-policer on the associated distributed CPU protection policy have been freed up and all the protocols are once again being monitored by local-monitor. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is configured to 'verbose'. [EFFECT] The affected SAP may be using more resources than expected and cause the system to underperform. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 50 } sapDcpDynamicEnforceAlloc NOTIFICATION-TYPE OBJECTS { sapDcpFpDynAllocated, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpDynamicEnforceAlloc notification is generated when a dynamic enforcement policer is allocated on a particular SAP. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is configured to 'verbose'. [EFFECT] The affected SAP is not in conformance with the configured parameters of the associated distributed CPU protection policy and may be using more resources than expected and cause the system to underperform. [RECOVERY] Appropriate configuration changes to the distributed CPU protection policy or to the affected SAP may be required." ::= { sapTraps 51 } sapDcpDynamicEnforceFreed NOTIFICATION-TYPE OBJECTS { sapDcpFpDynExcdCountHi, sapDcpFpDynExcdCountLo, sapDCpuProtPolicy, sapDcpTimeEventOccured } STATUS current DESCRIPTION "[CAUSE] The sapDcpDynamicEnforceFreed notification is generated when a dynamic enforcement policer is freed on a particular SAP. This notification is generated when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is configured to 'verbose'. [EFFECT] The affected SAP is now in conformance with the configured parameters of the associated distributed CPU protection policy. [RECOVERY] There is no recovery required for this notification." ::= { sapTraps 52 } sapTlsMacMoveExceedNonBlock NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, svcTlsMacMoveMaxRate, sapTlsNotifyMacAddr } STATUS current DESCRIPTION "[CAUSE] The sapTlsMacMoveExceedNonBlock notification is generated when the SAP exceeds the TLS svcTlsMacMoveMaxRate when sapTlsLimitMacMove is set to 'nonBlocking'. In case of Provider Backbone Bridging (PBB), if the MAC address that exceeds the rate is ISID-VPLS(iVpls) FDB and sap binding that detects the move is in Backbone-VPLS(bVpls), the notification will be generated with svcId, custId of I-VPLS and B-VPLS sapId. [EFFECT] This notification is informational only. [RECOVERY] User can adjust the value of svcTlsMacMoveMaxRate to reduce the frequency of this notification." ::= { sapTraps 53 } sapEthLoopbackStarted NOTIFICATION-TYPE OBJECTS { sapEthLoopbackMode, sapEthLoopbackMacSwap, sapEthLoopbackMacSwapAddr, sapEthLoopbackMacSwapAddrAll } STATUS current DESCRIPTION "[CAUSE] The sapEthLoopbackStarted notification is generated when the SAP is placed into loopback. [EFFECT] This notification is informational only." ::= { sapTraps 54 } sapEthLoopbackStopped NOTIFICATION-TYPE OBJECTS { sapEthLoopbackMode } STATUS current DESCRIPTION "[CAUSE] The sapEthLoopbackStopped notification is generated when the SAP is removed from loopback. [EFFECT] This notification is informational only." ::= { sapTraps 55 } sapTunnelEncapIpMtuTooSmall NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, sapTunnelNotifyName, sapTunnelNotifyConfigIpMtu, sapTunnelNotifyEncapOverhead, sapTunnelNotifyConfigEncapIpMtu } STATUS current DESCRIPTION "[CAUSE] The sapTunnelEncapIpMtuTooSmall notification is generated when the addition of tunnel encapsulation to a packet at or near the IP Tunnel's configured IP MTU may cause it to exceed the tunnel's configured encapsulated IP MTU. [EFFECT] The pre-encapsulated packet may be fragmented, and will require reassembly by the tunnel remote endpoint, causing a performance impact. [RECOVERY] Configured IP MTU and/or encapsulated IP MTU may need to be changed depending on the size of the encapsulation overhead as indicated in 'sapTunnelNotifyEncapOverhead', and the transmission capabilities of the tunnel's transport network." ::= { sapTraps 56 } sapHostRipListenerSetupFailed NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sapPortId, sapEncapValue, sapRipListenerHostIpAddr, sapRipListenerHostIpAddrType, sapRipListenerVRtrID, sapRipListenerNotifDescription } STATUS current DESCRIPTION "The sapHostRipListenerSetupFailed notification is generated when the system was unable to set up a RIP listener for the given host. [CAUSE] [EFFECT] [RECOVERY] No recovery is required on this system." ::= { sapTraps 57 } sapStatHost6DynMacConflict NOTIFICATION-TYPE OBJECTS { sapStatHost6DynMacAddress, sapNotifyReason } STATUS current DESCRIPTION "The sapStatHost6DynMacConflict notification is generated when the system was unable to update the MAC address of a static IPv6 host. [CAUSE] The system failed to update the MAC address of a static IPv6 host. [EFFECT] The static IPv6 host has a MAC address that is not up to date. [RECOVERY] The recovery action depends on the exact reason why the MAC update failed. This is clarified in the sapNotifyReason object." ::= { sapTraps 58 } tmnxIpTunnelOperStateChange NOTIFICATION-TYPE OBJECTS { tmnxIpTunnelAdminState, tmnxIpTunnelOperState, tmnxIpTunnelOperFlags } STATUS current DESCRIPTION "[CAUSE] The tmnxIpTunnelOperStateChange notification is generated when there is a change in tmnxIpTunnelOperState for an IP tunnel. [EFFECT] When the tunnel is operationally down, traffic arriving at the tunnel endpoints will not be encapsulated and transported." ::= { sapTraps 59 } svcEvpnMplsMacMoveExceedNonBlock NOTIFICATION-TYPE OBJECTS { tlsFdbEvpnMplsTEPAddrType, tlsFdbEvpnMplsTEPAddr, tlsFdbEvpnMplsLabel, tlsFdbEvpnMplsEthSegId, tlsFdbBackboneDstMac, svcId, custId, svcTlsMacMoveMaxRate, sapTlsNotifyMacAddr } STATUS current DESCRIPTION "[CAUSE] The svcEvpnMplsMacMoveExceedNonBlock notification is generated when the EVPN MPLS destination exceeds the TLS svcTlsMacMoveMaxRate when sapTlsLimitMacMove is set to 'nonBlocking'. [EFFECT] This notification is informational only. [RECOVERY] User can adjust the value of svcTlsMacMoveMaxRate to reduce the frequency of this notification." ::= { sapTraps 60 } sapIfIgnorePortStateStart NOTIFICATION-TYPE OBJECTS { svcId, sapNotifyIfName } STATUS current DESCRIPTION "[CAUSE] The sapIfIgnorePortStateStart notification is generated when system starts to ignore non-operational state of the port associated with the IP interface. [EFFECT] This notification is informational only. [RECOVERY] Set sapL3LoopbackRowStatus to 'destroy' to stop this." ::= { sapTraps 61 } sapIfIgnorePortStateStop NOTIFICATION-TYPE OBJECTS { svcId, sapNotifyIfName } STATUS current DESCRIPTION "[CAUSE] The sapIfIgnorePortStateStop notification is generated when system stops to ignore non-operational state of the port associated with the IP interface. [EFFECT] This notification is informational only. [RECOVERY] None required." ::= { sapTraps 62 } sapReceivedPbbProtSrcMac NOTIFICATION-TYPE OBJECTS { svcTlsBackboneVplsSvcId, sapPortId, sapEncapValue, protectedMacForNotify } STATUS current DESCRIPTION "[CAUSE] The sapReceivedPbbProtSrcMac notification is generated when a protected source MAC protected in i-vpls is received on SAP in b-vpls (svcTlsBackboneVplsSvcId) service. [EFFECT] The frame is discarded. [RECOVERY] None needed." ::= { sapTraps 63 } sapMgNotification OBJECT IDENTIFIER ::= { sapTrapsPrefix 1 } topologyChangeSapState NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue } STATUS current DESCRIPTION "The topologyChangeSapState notification is generated when a SAP has transitioned state to blocking or broken from a state other than forwarding. This event complements what is not covered by topologyChangeSapMajorState. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss." ::= { tstpTraps 5 } receivedTCN NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue } STATUS current DESCRIPTION "The receivedTCN notification is generated when a SAP has received TCN from another bridge. This bridge will either have its configured BPDU with the topology change flag set if it is a root bridge, or it will pass TCN to its root bridge. Eventually the address aging timer for the forwarding database will be made shorter for a short period of time. No recovery is needed." ::= { tstpTraps 6 } higherPriorityBridge NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue, tmnxCustomerBridgeId, tmnxCustomerRootBridgeId } STATUS current DESCRIPTION "The higherPriorityBridge notification is generated when a customer's device has been configured with a bridge priority equal to zero. The SAP that the customer's device is connected through will be blocked. Remove the customer's device or reconfigure the customer's bridge priority with a value greater than zero." ::= { tstpTraps 9 } bridgedTLS NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue } STATUS obsolete DESCRIPTION "The bridgedTLS notification is generated when a configuration BPDU has been received that identifies that another TLS with a different VPNID is attempting to bridge with this TLS. At least one ESR participating within one of the TLS that is locally connected must have an active VCP for this to be seen. The SAP that the configuration BPDU is received on will be blocked to prevent the TLS to TLS bridging. Reconfigure the bridged TLS into a single TLS or remove the connectivity." ::= { tstpTraps 10 } sapEncapPVST NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue, tmnxOtherBridgeId } STATUS current DESCRIPTION "The sapEncapPVST notification is generated when the SAP receives a BPDU that is PVST encapsulated, after having received BPDUs that were 802.d encapsulated. The SAP BPDUs will also be PVST encapsulated. No recovery is needed." ::= { tstpTraps 11 } sapEncapDot1d NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue, tmnxOtherBridgeId } STATUS current DESCRIPTION "The sapEncapDot1d notification is generated when the SAP receives a BPDU that is 802.1d encapsulated after having received BPDUs that were PVST encapsulated. The SAP BPDUs will also be 802.1d encapsulated. No recovery is needed." ::= { tstpTraps 12 } sapReceiveOwnBpdu NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue, tmnxOtherBridgeId } STATUS obsolete DESCRIPTION "The sapReceiveOwnBpdu notification is generated when the SAP STP received it's own BPDU." ::= { tstpTraps 13 } sapActiveProtocolChange NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue, sapTlsStpOperProtocol } STATUS current DESCRIPTION "The sapActiveProtocolChange notification is generated when the spanning tree protocol on this SAP changes from rstp to stp or vice versa. No recovery is needed." ::= { tstpTraps 30 } tmnxStpRootGuardViolation NOTIFICATION-TYPE OBJECTS { svcId, sapPortId, sapEncapValue, sapTlsStpRootGuardViolation } STATUS current DESCRIPTION "The tmnxStpRootGuardViolation notification is generated when a SAP which has root-guard configured is trying to become root (has a better STP priority vector). The SAP will become alternate and traffic will be blocked." ::= { tstpTraps 35 } tmnxSapStpExcepCondStateChng NOTIFICATION-TYPE OBJECTS { custId, svcId, sapPortId, sapEncapValue, sapTlsStpException } STATUS current DESCRIPTION "The tmnxSapStpExcepCondStateChng notification is generated when the value of the object sapTlsStpException has changed, i.e. when the exception condition changes on the indicated SAP." ::= { tstpTraps 37 } END