ALCATEL-IND1-AUTO-FABRIC-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE FROM SNMPv2-SMI InterfaceIndex FROM IF-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB softentIND1AutoFabric FROM ALCATEL-IND1-BASE; alcatelIND1AUTOFABRICMIB MODULE-IDENTITY LAST-UPDATED "201211260000Z" ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel Internetworking, Incorporated (Division 1, Formerly XYLAN Corporation) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://www.ind.alcatel.com File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE" REVISION "201211250000Z" DESCRIPTION "The AUTOFABRIC MIB defines a set of AUTOFABRIC related management objects for ports that support Autofabric feature. AUTOFABRIC as a feature provides mechanisms to automatically detect and configure LACP aggregates, SPB adjacencies and enables MVRP for automatically learning VLANs advertised by other switches This MIB comprises proprietary managed objects as well the objects required for conforming to the feature." ::= { softentIND1AutoFabric 1} -- -------------------------------------------------------------- alcatelIND1AUTOFABRICMIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIB 0 } alcatelIND1AUTOFABRICMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For AUTO-FABRIC Subsystem Managed Objects." ::= { alcatelIND1AUTOFABRICMIB 1 } alcatelIND1AUTOFABRICMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for AUTOFABRIC Module MIB Subsystem Conformance Information." ::= { alcatelIND1AUTOFABRICMIB 2 } alcatelIND1AUTOFABRICMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for AUTOFABRIC Module MIB Subsystem Units of Conformance." ::= { alcatelIND1AUTOFABRICMIBConformance 1 } alcatelIND1AUTOFABRICMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for AUTOFABRIC Module MIB Subsystem Compliance Statements." ::= { alcatelIND1AUTOFABRICMIBConformance 2 } -- -------------------------------------------------------------- -- -------------------------------------------------------------- -- AUTO-FABRIC MIB -- -------------------------------------------------------------- alaAutoFabricGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable Autofabric on the switch. The value enable (1) indicates that Autofabric should be enabled on the switch. The value disable (2) is used to disable Autofabric on the switch. By default, Autofabric is enabled on the switch." DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 1 } alaAutoFabricGlobalDiscovery OBJECT-TYPE SYNTAX INTEGER { default(1), restart(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global discovery window control for Autofabric. The value restart (2) indicates that Autofabric should restart global discovery window. By default, this object contains a zero value." DEFVAL { default } ::= { alcatelIND1AUTOFABRICMIBObjects 2 } alaAutoFabricGlobalLACPProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable AutoFabric LACP discovery. on the switch. The value enable (1) indicates that during discovery the switch will attempt to create LACP link aggregates. The value disable (2) indicates that there would be no attempt to create LACP link aggregates during the discovery phase. By default LACP is enabled on the switch" DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 3 } alaAutoFabricGlobalSPBProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable AutoFabric SPB discovery. on the switch. The value enable (1) indicates that during discovery the switch will attempt to create SPB adjacencies. The value disable (2) indicates that there would be no attempt to create SPB adjacencies during the discovery phase. By default SPB is enabled on the switch" DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 4 } alaAutoFabricGlobalMVRPProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable AutoFabric MVRP discovery. on the switch. The value enable (1) indicates that during discovery the switch will enable MVRP and attempt to propagate and learn VLANs. The value disable (2) indicates that MVRP would not be enabled in discovery phase. By default MVRP is enabled on the switch" DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 5 } alaAutoFabricGlobalConfigSaveTimer OBJECT-TYPE SYNTAX Unsigned32 ( 60 .. 3600 ) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum period of time after which configuration built up by AutoFabric would get written to the boot.cfg or vcboot.cfg. The range supported is 60-3600 seconds." DEFVAL { 300 } ::= { alcatelIND1AUTOFABRICMIBObjects 6 } alaAutoFabricGlobalConfigSaveTimerStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable AutoFabric config save timer on the switch. The value enable (1) indicates that after the expiry of the config save timer, all AutoFabric configurations would get written to the boot.cfg ot the vcboot.cfg The value disable (2) would disable the config save timer. By default it is enabled" DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 7 } alaAutoFabricGlobalDiscoveryTimer OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 3600 ) UNITS "Minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to specify auto-fabric auto discovery interval, zero disables it, configurable Value is from 2 to 3600 minutes." DEFVAL { 0 } ::= { alcatelIND1AUTOFABRICMIBObjects 8 } alaAutoFabricRemoveGlobalConfig OBJECT-TYPE SYNTAX INTEGER { default(1), removeGlobalConfig(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabric" DEFVAL { default } ::= { alcatelIND1AUTOFABRICMIBObjects 10 } alaAutoFabricGlobalOSPFv2ProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or disable auto configuration on the OSPFv2 IP Protocol on the switch. " DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 11 } alaAutoFabricGlobalOSPFv3ProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or disable auto configuration on the OSPFv3 IP Protocol on the switch. " DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 12 } alaAutoFabricGlobalISISProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or disable auto configuration on the ISIS IP Protocol on the switch. " DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 13 } alaAutoFabricSPBDefaultProfile OBJECT-TYPE SYNTAX INTEGER { singleService(1), autoVlan(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default SAP profile used in the Omni switch. singleService: defines single service SAP profiles. autoVlan: AOS will generate SAP bindings for VLANS concerned automatically" DEFVAL { autoVlan } ::= { alcatelIND1AUTOFABRICMIBObjects 14 } alaAutoFabricLBDProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or disable AutoFabric LBD on SAP port on the switch. The value enable (1) indicates that during discovery the switch will enable Loopback detection on UNP SAP port. The value disable (2) indicates that Loobback detection will not be enabled on UNP SAP port discovery" DEFVAL { enable } ::= { alcatelIND1AUTOFABRICMIBObjects 15 } alaAutoFabricRemoveVCReload OBJECT-TYPE SYNTAX INTEGER { default(1), removeVCReload(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is applicable only for Standalone configuration. It reloads the unit as a Standalone when the user chooses to disable auto fabric." DEFVAL { default } ::= { alcatelIND1AUTOFABRICMIBObjects 17 } -- ------------------------------------------------------------- -- AUTO-FABRIC Port Config Table -- ------------------------------------------------------------- -- DESCRIPTION: -- "Port configuration information -- data for the AUTO-FABRIC Module. -- Implementation of this group is mandantory" alaAutoFabricPortConfig OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 9 } alaAutoFabricPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaAutoFabricPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing Autofabric port configuration information." ::= { alaAutoFabricPortConfig 1 } alaAutoFabricPortConfigEntry OBJECT-TYPE SYNTAX AlaAutoFabricPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An AutoFabric port configuration entry." INDEX { alaAutoFabricPortConfigIfIndex } ::= { alaAutoFabricPortConfigTable 1 } AlaAutoFabricPortConfigEntry ::= SEQUENCE { alaAutoFabricPortConfigIfIndex InterfaceIndex, alaAutoFabricPortConfigStatus INTEGER, alaAutoFabricPortLACPProtocolStatus INTEGER, alaAutoFabricPortSPBProtocolStatus INTEGER, alaAutoFabricPortMVRPProtocolStatus INTEGER, alaAutoFabricPortStatus INTEGER, alaAutoFabricPortSPBDefaultProfile INTEGER } alaAutoFabricPortConfigIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of the port on which AutoFabric is running" ::= { alaAutoFabricPortConfigEntry 1 } alaAutoFabricPortConfigStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable or diable AutoFabric on the interface. The value enable (1) indicates that AutoFabric should be enabled on the interface. The value disable (2) is used to disable AutoFabric on the interface. By default, AutoFabric is enabled on the interface." DEFVAL { enable } ::= { alaAutoFabricPortConfigEntry 2 } alaAutoFabricPortLACPProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable LACP in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will attempt to form LACP link aggregates. The value disable (2) indicates this port will not participate in LACP discovery phase. By default it is enabled" DEFVAL { enable } ::= { alaAutoFabricPortConfigEntry 3 } alaAutoFabricPortSPBProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable SPB in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will attempt to form SPB adjacencies. The value disable (2) indicates this port will not participate in SPB discovery phase. By default it is enabled" DEFVAL { enable } ::= { alaAutoFabricPortConfigEntry 4 } alaAutoFabricPortMVRPProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to enable MVRP in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will enable MVRP and attempt to learn and propagate VLANs. The value disable (2) indicates this port will not participate in MVRP discovery phase. By default it is enabled" DEFVAL { enable } ::= { alaAutoFabricPortConfigEntry 5 } alaAutoFabricPortStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), pending (2), complete (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Autofabric discovery window on the port." ::= { alaAutoFabricPortConfigEntry 6 } alaAutoFabricPortSPBDefaultProfile OBJECT-TYPE SYNTAX INTEGER { singleService(1), autoVlan(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default SAP profile used on a particular port in the switch. singleService: defines single service SAP profiles. autoVlan: AOS will generate SAP bindings for VLANS concerned automatically." DEFVAL { autoVlan } ::= { alaAutoFabricPortConfigEntry 7 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaAutoFabricTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 16 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaAutoFabricSTPMode OBJECT-TYPE SYNTAX INTEGER { flatMode(1), perVlan(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the change in STP Mode, to Flat or 1X1, due to the change in Auto-Fabric admin-status." ::= { alaAutoFabricTrapsObj 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Trap Description -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaAutoFabricSTPModeChangeAlert NOTIFICATION-TYPE OBJECTS { alaAutoFabricSTPMode } STATUS current DESCRIPTION "This trap is sent when auto-fabric changes STP mode." ::= { alcatelIND1AUTOFABRICMIBNotifications 1 } -- ------------------------------------------------------------- -- COMPLIANCE -- ------------------------------------------------------------- alcatelIND1AUTOFABRICMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for AUTOFABRIC." MODULE MANDATORY-GROUPS { alaAutoFabricBaseGroup, alaAutoFabricPortConfigGroup, alaAutoFabricNotificationGroup, alaAutoFabricTrapsObjGroup } ::= { alcatelIND1AUTOFABRICMIBCompliances 1 } -- ------------------------------------------------------------- -- UNITS OF CONFORMANCE -- ------------------------------------------------------------- alaAutoFabricBaseGroup OBJECT-GROUP OBJECTS { alaAutoFabricGlobalStatus, alaAutoFabricGlobalDiscovery, alaAutoFabricGlobalLACPProtocolStatus, alaAutoFabricGlobalSPBProtocolStatus, alaAutoFabricGlobalMVRPProtocolStatus, alaAutoFabricGlobalConfigSaveTimer, alaAutoFabricGlobalConfigSaveTimerStatus, alaAutoFabricGlobalDiscoveryTimer, alaAutoFabricRemoveGlobalConfig, alaAutoFabricGlobalOSPFv2ProtocolStatus, alaAutoFabricGlobalOSPFv3ProtocolStatus, alaAutoFabricGlobalISISProtocolStatus, alaAutoFabricSPBDefaultProfile, alaAutoFabricLBDProtocolStatus, alaAutoFabricRemoveVCReload } STATUS current DESCRIPTION "Collection of objects for management of AutoFabric Base Group." ::= { alcatelIND1AUTOFABRICMIBGroups 1 } alaAutoFabricPortConfigGroup OBJECT-GROUP OBJECTS { alaAutoFabricPortConfigStatus, alaAutoFabricPortLACPProtocolStatus, alaAutoFabricPortSPBProtocolStatus, alaAutoFabricPortMVRPProtocolStatus, alaAutoFabricPortStatus, alaAutoFabricPortSPBDefaultProfile } STATUS current DESCRIPTION "Collection of objects for management of AutoFabric Port Configuration Table." ::= { alcatelIND1AUTOFABRICMIBGroups 2 } alaAutoFabricNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { alaAutoFabricSTPModeChangeAlert } STATUS current DESCRIPTION "Collection of notifications for Auto-Fabric." ::= { alcatelIND1AUTOFABRICMIBGroups 3 } alaAutoFabricTrapsObjGroup OBJECT-GROUP OBJECTS { alaAutoFabricSTPMode } STATUS current DESCRIPTION "Collection of notificating objects for Auto-Fabric." ::= { alcatelIND1AUTOFABRICMIBGroups 4 } -- ------------------------------------------------------------- END