ALCATEL-IND1-DHCPV6-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, PhysAddress, DisplayString,RowStatus, TimeStamp, TruthValue, DateAndTime FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Ipv6Address, Ipv6IfIndexOrZero FROM IPV6-TC softentIND1Ipv6 FROM ALCATEL-IND1-BASE ipv6IfIndex FROM IPV6-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB; alcatelIND1DHCPv6MIB MODULE-IDENTITY LAST-UPDATED "201303220000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary DHCPv6 MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "201303220000Z" DESCRIPTION "The first version of this MIB Module." ::= { softentIND1Ipv6 2 } alcatelIND1DHCPv6MIBObjects OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIB 1 } -- -- Alcatel DHCPv6 configuration -- alaDHCPv6RelayConfig OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 1 } alaDHCPv6RelayAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Global DHCPv6 administrative status. This object provides a means to globally enable or disable the DHCPv6 relay feature. DHCPv6 Relay must still be enabled on individual interfaces in order for relay operation to occur." ::= { alaDHCPv6RelayConfig 1 } alaDHCPv6SrvConfig OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 2 } alaDHCPv6SrvGlobalConfigStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable(1) or disable(2) DHCPv6 Server on the switch." DEFVAL { disable } ::= { alaDHCPv6SrvConfig 1 } alaDHCPv6SrvGlobalRestart OBJECT-TYPE SYNTAX INTEGER { inactive(1), restart(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to restart(2) the DHCPv6 Server on the switch. Default value is inactive(1) which user can not set." DEFVAL { inactive } ::= { alaDHCPv6SrvConfig 2 } alaDHCPv6SrvGlobalClearStat OBJECT-TYPE SYNTAX INTEGER { default(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the global clear statistics control for DHCPv6 Server. default(1) - default value for this object, reset(2) - indicates that all statistic related to DHCPv6 server in the system should get cleared." DEFVAL { default } ::= { alaDHCPv6SrvConfig 3 } -- -- Alcatel DHCPv6 Relay Interface Table -- alaDHCPv6RelayInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDHCPv6RelayInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table controlling DHCPv6 Relay on IPv6 interfaces. This table extends the corresponding IPv6 interface entry in alaIPv6InterfaceTable." ::= { alcatelIND1DHCPv6MIBObjects 3 } alaDHCPv6RelayInterfaceEntry OBJECT-TYPE SYNTAX AlaDHCPv6RelayInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An DHCPv6 relay interface entry." INDEX { ipv6IfIndex } ::= { alaDHCPv6RelayInterfaceTable 1 } AlaDHCPv6RelayInterfaceEntry ::= SEQUENCE { alaDHCPv6RelayInterfaceAdminStatus INTEGER } alaDHCPv6RelayInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "DHCPv6 administrative status on the interface." ::= { alaDHCPv6RelayInterfaceEntry 1 } -- -- Alcatel DHCPv6 Relay Destination Table -- alaDHCPv6RelayDestinationTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDHCPv6RelayDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table allowing the creation and removal of DHCPv6 Relay destinations for an interface." ::= { alcatelIND1DHCPv6MIBObjects 4 } alaDHCPv6RelayDestinationEntry OBJECT-TYPE SYNTAX AlaDHCPv6RelayDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DHCPv6 relay destination entry." INDEX { ipv6IfIndex, alaDHCPv6RelayDestinationAddressType, alaDHCPv6RelayDestinationAddress } ::= { alaDHCPv6RelayDestinationTable 1 } AlaDHCPv6RelayDestinationEntry ::= SEQUENCE { alaDHCPv6RelayDestinationAddressType InetAddressType, alaDHCPv6RelayDestinationAddress InetAddress, alaDHCPv6RelayDestinationRowStatus RowStatus } alaDHCPv6RelayDestinationAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of a DHCPv6 relay destination. Only ipv6(2) or ipv6z(4) are allowed." ::= { alaDHCPv6RelayDestinationEntry 1 } alaDHCPv6RelayDestinationAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address of a DHCPv6 relay destination." ::= { alaDHCPv6RelayDestinationEntry 2 } alaDHCPv6RelayDestinationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to control the addition and removal of DHCPv6 relay destinations." ::= { alaDHCPv6RelayDestinationEntry 3 } -- -- Alcatel DHCPv6 Server Lease Table -- alaDHCPv6SrvLease OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 5 } alaDHCPv6SrvLeaseTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaDHCPv6SrvLeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCPv6 server lease table." ::= { alaDHCPv6SrvLease 1 } alaDHCPv6SrvLeaseEntry OBJECT-TYPE SYNTAX AlaDHCPv6SrvLeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCPv6 server lease entry." INDEX { alaDHCPv6SrvLeaseIpv6Address } ::= { alaDHCPv6SrvLeaseTable 1 } AlaDHCPv6SrvLeaseEntry ::= SEQUENCE { alaDHCPv6SrvLeaseIpv6Address Ipv6Address, alaDHCPv6SrvLeaseLeaseGrant DateAndTime, alaDHCPv6SrvLeasePrefLeaseExpiry DateAndTime, alaDHCPv6SrvLeaseValidLeaseExpiry DateAndTime, alaDHCPv6SrvLeaseType INTEGER } alaDHCPv6SrvLeaseIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 address assigned to the client" ::= { alaDHCPv6SrvLeaseEntry 1 } alaDHCPv6SrvLeaseLeaseGrant OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Lease granted time for the client." ::= { alaDHCPv6SrvLeaseEntry 2 } alaDHCPv6SrvLeasePrefLeaseExpiry OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Preferred Lease expiry of the client." ::= { alaDHCPv6SrvLeaseEntry 3 } alaDHCPv6SrvLeaseValidLeaseExpiry OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Lease expiry of the client." ::= { alaDHCPv6SrvLeaseEntry 4 } alaDHCPv6SrvLeaseType OBJECT-TYPE SYNTAX INTEGER { unavailable(1), dynamic(2), manual(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the lease." ::= { alaDHCPv6SrvLeaseEntry 5 } -- -- Notifications -- alcatelIND1DHCPv6MIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIB 0 } -- -------------------------------------------------------------- -- Trap Description -- -------------------------------------------------------------- alaDHCPv6SrvTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 6 } alaDHCPv6SrvLeaseUtilizationThresholdTrap NOTIFICATION-TYPE OBJECTS { alaDHCPv6SrvLeaseThresholdStatus, alaDHCPv6SrvSubnetDescriptor } STATUS current DESCRIPTION "When the lease utilization in a subnet exceeds or deceeds threshold value set by the application, a notification is sent to the Management Entity, with the DHCPv6 Server lease utilization information." ::= { alcatelIND1DHCPv6MIBNotifications 1 } alaDHCPv6SrvLeaseThresholdStatus OBJECT-TYPE SYNTAX INTEGER { crossedBelow80Threshold(1), crossedAbove80Threshold(2), reached100Threshold(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the threshold status of subnet utilization." ::= { alaDHCPv6SrvTrapsObj 1 } alaDHCPv6SrvSubnetDescriptor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the subnet Descriptor. Denotes the IPv6 address" ::= { alaDHCPv6SrvTrapsObj 2 } -- -- conformance information -- alcatelIND1DHCPv6MIBConformance OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIB 2 } alcatelIND1DHCPv6MIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBConformance 1 } alcatelIND1DHCPv6MIBGroups OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBConformance 2 } alaDHCPv6Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for switches implementing ALCATEL-IND1-DHCPV6-MIB." MODULE GROUP alaDHCPv6RelayGroup DESCRIPTION "The alaDHCPv6RelayGroup is mandatory when the managed entity supports DHCPv6 relay." GROUP alaDHCPv6SrvGroup DESCRIPTION "The alaDHCPv6SrvGroup is mandatory when the managed entity supports DHCPv6 server." GROUP alaDHCPv6SrvNotificationsGroup DESCRIPTION "The alaDHCPv6SrvNotificationsGroup is mandatory when the managed entity supports DHCPv6 server." GROUP alaDHCPv6SrvLeaseUtilizationThresholdGroup DESCRIPTION " The alaDHCPv6SrvLeaseUtilizationThresholdGroup is mandatory when the managed entity supports DHCPv6 server." ::= { alcatelIND1DHCPv6MIBCompliances 1 } -- -- units of conformance -- alaDHCPv6RelayGroup OBJECT-GROUP OBJECTS { alaDHCPv6RelayAdminStatus, alaDHCPv6RelayInterfaceAdminStatus, -- alaDHCPv6RelayDestinationAddressType, -- alaDHCPv6RelayDestinationAddress, alaDHCPv6RelayDestinationRowStatus } STATUS current DESCRIPTION "A collection of objects to support management of DHCPv6 Relay." ::= { alcatelIND1DHCPv6MIBGroups 1 } alaDHCPv6SrvGroup OBJECT-GROUP OBJECTS { alaDHCPv6SrvGlobalConfigStatus, alaDHCPv6SrvGlobalRestart, alaDHCPv6SrvGlobalClearStat, -- alaDHCPv6SrvLeaseIpv6Address, alaDHCPv6SrvLeaseLeaseGrant, alaDHCPv6SrvLeasePrefLeaseExpiry, alaDHCPv6SrvLeaseValidLeaseExpiry, alaDHCPv6SrvLeaseType } STATUS current DESCRIPTION "A collection of objects to support management of DHCPv6 server." ::= { alcatelIND1DHCPv6MIBGroups 2 } alaDHCPv6SrvNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { alaDHCPv6SrvLeaseUtilizationThresholdTrap } STATUS current DESCRIPTION "Notifications for DHCPv6 server." ::= { alcatelIND1DHCPv6MIBGroups 3 } alaDHCPv6SrvLeaseUtilizationThresholdGroup OBJECT-GROUP OBJECTS { alaDHCPv6SrvLeaseThresholdStatus, alaDHCPv6SrvSubnetDescriptor } STATUS current DESCRIPTION "When the lease utilization in a subnet exceeds or deceeds threshold value set by the application, a notification is sent to the Management Entity, with the DHCPv6 Server lease utilization information." ::= { alcatelIND1DHCPv6MIBGroups 4 } END