ALCATEL-IND1-IPRM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32 FROM SNMPv2-SMI RowStatus,TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF IANAipRouteProtocol FROM IANA-RTPROTO-MIB routingIND1Iprm FROM ALCATEL-IND1-BASE ; alcatelIND1IPRMMIB MODULE-IDENTITY LAST-UPDATED "201212010000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IPRM global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2010 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "201002220000Z" DESCRIPTION "The latest version of this MIB Module." ::= { routingIND1Iprm 1 } alcatelIND1IPRMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIB 1 } alaIprmConfig OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIBObjects 1 } -- Textual Conventions AlaIprmAdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Admin status" SYNTAX INTEGER { enabled(1), disabled(2) } AlaIprmStaticRouteTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A mechanism for distinguishing the type of static route" SYNTAX INTEGER { regular(1), recursive(2), bfdEnabled(3), interface(4) } AlaMplsL3VpnRouteType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]." REFERENCE "[RFC4364]" SYNTAX INTEGER { import(1), export(2), both(3) } AlaIprmRtPrefType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to define the various types of routes along with their route preference values" SYNTAX INTEGER { local(1), static(2), ospf(3), rip(4), bgpExternal(5), bgpInternal(6), isisl1(7), isisl2(8), import(9) } -- Route Table alaIprmRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIprmRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPRM's Routing table." ::= { alaIprmConfig 1 } alaIprmRouteEntry OBJECT-TYPE SYNTAX AlaIprmRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination" INDEX { alaIprmRouteDest, alaIprmRouteMask, alaIprmRouteTos, alaIprmRouteNextHop } ::= { alaIprmRouteTable 1 } AlaIprmRouteEntry ::= SEQUENCE { alaIprmRouteDest IpAddress, alaIprmRouteMask IpAddress, alaIprmRouteTos Integer32, alaIprmRouteNextHop IpAddress, alaIprmRouteProto IANAipRouteProtocol, alaIprmRouteMetric Integer32, alaIprmRoutePriority Integer32 } alaIprmRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route." ::= { alaIprmRouteEntry 1 } alaIprmRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mask of this route" ::= { alaIprmRouteEntry 2 } alaIprmRouteTos OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TOS for this route" ::= { alaIprmRouteEntry 3 } alaIprmRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Gateway for this route" ::= { alaIprmRouteEntry 4 } alaIprmRouteProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol that this route was learned from" ::= { alaIprmRouteEntry 5 } alaIprmRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The metric for this route" ::= { alaIprmRouteEntry 6 } alaIprmRoutePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority for this route" ::= { alaIprmRouteEntry 7 } -- Static Route Table alaIprmStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIprmStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPRM's Static Route table." ::= { alaIprmConfig 2 } alaIprmStaticRouteEntry OBJECT-TYPE SYNTAX AlaIprmStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A route entered by the user" INDEX { alaIprmStaticRouteDest, alaIprmStaticRouteMask, alaIprmStaticRouteNextHop } ::= { alaIprmStaticRouteTable 1 } AlaIprmStaticRouteEntry ::= SEQUENCE { alaIprmStaticRouteDest IpAddress, alaIprmStaticRouteMask IpAddress, alaIprmStaticRouteNextHop IpAddress, alaIprmStaticRouteMetric Integer32, alaIprmStaticRouteStatus RowStatus, alaIprmStaticRouteBfdStatus AlaIprmAdminStatus, alaIprmStaticRouteType AlaIprmStaticRouteTypes, alaIprmStaticRouteTag Unsigned32, alaIprmStaticRouteName SnmpAdminString } alaIprmStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route." ::= { alaIprmStaticRouteEntry 1 } alaIprmStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mask of this route" ::= { alaIprmStaticRouteEntry 2 } alaIprmStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Gateway for this route" ::= { alaIprmStaticRouteEntry 3 } alaIprmStaticRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The metric for this route" ::= { alaIprmStaticRouteEntry 4 } alaIprmStaticRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Enabling causes a new static route to be created, disabled causes that static route to be deleted." ::= { alaIprmStaticRouteEntry 5 } alaIprmStaticRouteBfdStatus OBJECT-TYPE SYNTAX AlaIprmAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For enabling or disabling the BFD status on this static route." ::= { alaIprmStaticRouteEntry 6 } alaIprmStaticRouteType OBJECT-TYPE SYNTAX AlaIprmStaticRouteTypes MAX-ACCESS read-create STATUS current DESCRIPTION "Type of static route." ::= { alaIprmStaticRouteEntry 7 } alaIprmStaticRouteTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Tag associated with static route." ::= { alaIprmStaticRouteEntry 8 } alaIprmStaticRouteName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "A comment associated with the static route." ::= { alaIprmStaticRouteEntry 9 } -- BFD status for all static routes alaIprmStaticAllBfd OBJECT-TYPE SYNTAX AlaIprmAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "For attempting to enable/disable the BFD state on all static routes." DEFVAL { disabled } ::= { alaIprmConfig 3 } -- Primary Address alaIprmPrimaryAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Primary IP Address of this Router." ::= { alaIprmConfig 4 } -- Router ID alaIprmRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Router-id for this Router." ::= {alaIprmConfig 5 } -- Route Distinguisher alaIprmRouteDistinguisher OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (3..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Associates a route distinguisher to a VRF. Syntax for a route distinguisher and route target as defined in [RFC4364]." ::= { alaIprmConfig 6 } -- Route Target Table alaIprmRouteTargetTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIprmRouteTargetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN." ::= { alaIprmConfig 7 } alaIprmRouteTargetEntry OBJECT-TYPE SYNTAX AlaIprmRouteTargetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS L3VPN instance. See [RFC4364] for a complete definition of a route target." INDEX { alaIprmRouteTarget } ::= { alaIprmRouteTargetTable 1 } AlaIprmRouteTargetEntry ::= SEQUENCE { alaIprmRouteTarget SnmpAdminString, alaIprmRouteTargetType AlaMplsL3VpnRouteType, alaIprmRouteTargetRowStatus RowStatus } alaIprmRouteTarget OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (3..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Virtual Router Route Target. Syntax for a route distinguisher and route target as defined in [RFC4364]." ::= { alaIprmRouteTargetEntry 1 } alaIprmRouteTargetType OBJECT-TYPE SYNTAX AlaMplsL3VpnRouteType MAX-ACCESS read-create STATUS current DESCRIPTION "The route target distribution type." ::= { alaIprmRouteTargetEntry 2 } alaIprmRouteTargetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { alaIprmRouteTargetEntry 3 } -- Route Preference Table alaIprmRtPrefTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIprmRtPrefTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the route preference values for various types of routes." ::= { alaIprmConfig 8 } alaIprmRtPrefTableEntry OBJECT-TYPE SYNTAX AlaIprmRtPrefTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is in this table for each route preference type." INDEX { alaIprmRtPrefEntryType } ::= { alaIprmRtPrefTable 1 } AlaIprmRtPrefTableEntry ::= SEQUENCE { alaIprmRtPrefEntryType AlaIprmRtPrefType, alaIprmRtPrefEntryValue Integer32 } alaIprmRtPrefEntryType OBJECT-TYPE SYNTAX AlaIprmRtPrefType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of route (associated with a route preference value)" ::= { alaIprmRtPrefTableEntry 1 } alaIprmRtPrefEntryValue OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The route preference value used for this type of route." ::= { alaIprmRtPrefTableEntry 2 } -- Route Leaking Export route-map alaIprmExportRouteMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A route-map index representing the route-map used to filter routes exported to the Global Route Table. A value of -1 indicates no routes should be exported. A value of 0 indicates all routes should be exported. Otherwise, the value is the route-map index to use for filtering." ::= { alaIprmConfig 9 } -- Route Leaking Import Vrf Table alaIprmImportVrfTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIprmImportVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies VRFs to import routes from." ::= { alaIprmConfig 10 } alaIprmImportVrfEntry OBJECT-TYPE SYNTAX AlaIprmImportVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created for each VRF to import routes from." INDEX { alaIprmImportVrfName } ::= { alaIprmImportVrfTable 1 } AlaIprmImportVrfEntry ::= SEQUENCE { alaIprmImportVrfName SnmpAdminString, alaIprmImportVrfRouteMap Integer32, alaIprmImportVrfRowStatus RowStatus } alaIprmImportVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the VRF that routes should be imported from. An empty string indicates the default VRF." ::= { alaIprmImportVrfEntry 1 } alaIprmImportVrfRouteMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "A route-map index representing the route-map used to filter imported routes." ::= { alaIprmImportVrfEntry 2 } alaIprmImportVrfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { alaIprmImportVrfEntry 3 } -- Route Leaking Import Isid Table alaIprmImportIsidTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIprmImportIsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies ISIS L3VPN ISIDs to import routes from." ::= { alaIprmConfig 11 } alaIprmImportIsidEntry OBJECT-TYPE SYNTAX AlaIprmImportIsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created for each ISID to import routes from." INDEX { alaIprmImportIsid } ::= { alaIprmImportIsidTable 1 } AlaIprmImportIsidEntry ::= SEQUENCE { alaIprmImportIsid Unsigned32, alaIprmImportIsidRouteMap Integer32, alaIprmImportIsidRowStatus RowStatus } alaIprmImportIsid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ISIS SPB L3VPN ISID that routes should be imported from." ::= { alaIprmImportIsidEntry 1 } alaIprmImportIsidRouteMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "A route-map index representing the route-map used to filter imported routes." ::= { alaIprmImportIsidEntry 2 } alaIprmImportIsidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { alaIprmImportIsidEntry 3 } -- Route Leaking Export All route-map alaIprmExportToAllVrfsRouteMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Used to export routes to all other VRFs that don't already have an entry in the Import Vrf Table. The object is a route-map index representing the route-map used to filter the exported routes. A value of -1 indicates no routes should be exported. A value of 0 indicates all routes should be exported. Otherwise, the value is the route-map index to use for filtering." ::= { alaIprmConfig 12 } -- conformance information alcatelIND1IPRMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIB 2 } alcatelIND1IPRMMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIBConformance 1 } alcatelIND1IPRMMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIBConformance 2 } -- compliance statements alaIprmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers running IPRM and implementing the ALCATEL-IND1-IPRM MIB." MODULE -- this module MANDATORY-GROUPS { alaIprmConfigMIBGroup } ::= { alcatelIND1IPRMMIBCompliances 1 } -- units of conformance alaIprmConfigMIBGroup OBJECT-GROUP OBJECTS { alaIprmRouteProto, alaIprmRouteMetric, alaIprmRoutePriority, alaIprmStaticRouteMetric, alaIprmStaticRouteStatus, alaIprmStaticRouteBfdStatus, alaIprmStaticRouteType, alaIprmStaticRouteTag, alaIprmStaticRouteName, alaIprmStaticAllBfd, alaIprmPrimaryAddress, alaIprmRouterId, alaIprmRouteDistinguisher, alaIprmRouteTargetType, alaIprmRouteTargetRowStatus, alaIprmRtPrefEntryValue, alaIprmExportRouteMap, alaIprmImportVrfRouteMap, alaIprmImportVrfRowStatus, alaIprmImportIsidRouteMap, alaIprmImportIsidRowStatus, alaIprmExportToAllVrfsRouteMap } STATUS current DESCRIPTION "A collection of objects to support management of global configuration parameters of the IPRM Module." ::= { alcatelIND1IPRMMIBGroups 1 } END