ALCATEL-IND1-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, Counter64, NOTIFICATION-TYPE, MODULE-IDENTITY, TimeTicks, Integer32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString, MacAddress, DateAndTime, TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex, ifInErrors, ifOutErrors, ifEntry, InterfaceIndex FROM IF-MIB softentIND1Port FROM ALCATEL-IND1-BASE alclnkaggAggIndex FROM ALCATEL-IND1-LAG-MIB; alcatelIND1PortMIB MODULE-IDENTITY LAST-UPDATED "201311220000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This group contains the configuration information data for the Ethernet and Fiber Channel Switching Module. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "201311220000Z" DESCRIPTION "Add support for Fiber Channel interface statistics" REVISION "201005130000Z" DESCRIPTION "Fixed the Notifications to use MIB Module OID.0 as Notifications root." REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { softentIND1Port 1} CableState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "an enumerated value used to indicate the status of a cable pair" SYNTAX INTEGER { ok(1), open(2), short(3), openShort(4), crossTalk(5), unknown(6) } alcatelIND1PortNotifications OBJECT IDENTIFIER ::= { alcatelIND1PortMIB 0 } alcatelIND1PortMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1PortMIB 1 } alcatelIND1PortMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1PortMIB 2 } -- -- alcatelIND1PortMIBObjects -- esmConfTrap OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 1 } physicalPort OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 2 } ddmConfiguration OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 4 } portViolations OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 5 } csmConfTrap OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 6 } interfaceCounters OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 7 } esmStormTrap OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 8 } linkAggPort OBJECT IDENTIFIER ::= { alcatelIND1PortMIBObjects 9 } -- Ethernet Driver object related to Trap ********************* esmDrvTrapDrops OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Partitioned port (separated due to errors)." ::= { esmConfTrap 1 } -- Dying Gasp Trap Object alaDyingGaspChassisId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the chassis id of the chassis whose NI is going down." ::= { csmConfTrap 1 } alaDyingGaspPowerSupplyType OBJECT-TYPE SYNTAX INTEGER { primary (1), backup (2), saps (3), all (4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the type of the power supply." ::= { csmConfTrap 2 } alaDyingGaspTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies the time of power failure." ::= { csmConfTrap 3 } -- Ethernet Storm Violation esmStormViolationThresholdNotificationType OBJECT-TYPE SYNTAX INTEGER { clearViolation(1), highAlarm(2), lowAlarm(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This type defines the trap genrated by storm control feature for high or low threshold." ::= { esmStormTrap 1 } esmStormViolationThresholdTrafficType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), multicast(2), uunicast(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This type defines the traffic for which the trap genrated by storm control feature for high or low threshold." ::= { esmStormTrap 2 } -- Ethernet Driver Tables ***************************** -- EsmConf group. This group contains the configuration -- information data for the Ethernet Switching Module. -- Implementation of this group is mandantory. -- -- Note that this MIB can NOT be used for row creation (this -- would imply that you could override the actual physical -- characteristics of the physical card!). esmConfTable OBJECT-TYPE SYNTAX SEQUENCE OF EsmConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ESM Physical Port instances." ::= { physicalPort 1 } esmConfEntry OBJECT-TYPE SYNTAX EsmConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A ESM Physical Port entry." INDEX { ifIndex } ::= { esmConfTable 1 } EsmConfEntry ::= SEQUENCE { esmPortSlot Integer32, esmPortIF Integer32, esmPortAutoSpeed INTEGER, esmPortAutoDuplexMode INTEGER, esmPortCfgSpeed INTEGER, esmPortCfgDuplexMode INTEGER, esmPortAdminStatus INTEGER, esmPortLinkUpDownTrapEnable INTEGER, esmPortCfgMaxFrameSize Integer32, esmPortAlias SnmpAdminString, esmPortCfgPause INTEGER, esmPortCfgAutoNegotiation INTEGER, esmPortCfgCrossover INTEGER, esmPortCfgHybridActiveType INTEGER, esmPortCfgHybridMode INTEGER, esmPortOperationalHybridType INTEGER, esmPortBcastRateLimitEnable INTEGER, esmPortBcastRateLimitType INTEGER, esmPortBcastRateLimit Integer32, esmPortMcastRateLimitEnable INTEGER, esmPortMcastRateLimitType INTEGER, esmPortMcastRateLimit Integer32, esmPortUucastRateLimitEnable INTEGER, esmPortUucastRateLimitType INTEGER, esmPortUucastRateLimit Integer32, esmPortIngressRateLimitEnable INTEGER, esmPortIngressRateLimit Integer32, esmPortIngressRateLimitBurst Integer32, esmPortEPPEnable INTEGER, esmPortEEEEnable INTEGER, esmPortIsFiberChannelCapable INTEGER, esmPortBcastThresholdAction INTEGER, esmPortMcastThresholdAction INTEGER, esmPortUucastThresholdAction INTEGER, esmPortMinBcastRateLimit Integer32, esmPortMinMcastRateLimit Integer32, esmPortMinUucastRateLimit Integer32, esmPortBcastStormState INTEGER, esmPortMcastStormState INTEGER, esmPortUucastStormState INTEGER } esmPortSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap." ::= { esmConfEntry 1 } esmPortIF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap." ::= { esmConfEntry 2 } esmPortAutoSpeed OBJECT-TYPE SYNTAX INTEGER { speed100(1), speed10(2), speedAuto(3), unknown(4), speed1000(5), speed10000(6), speed40000(7), speed20000(11), speed21000(12), speed2000(13), speed4000(14), speed8000(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The automatically detected port line speed of this ESM port." ::= { esmConfEntry 3 } esmPortAutoDuplexMode OBJECT-TYPE SYNTAX INTEGER { fullDuplex(1), halfDuplex(2), autoDuplex(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The automatically detected port duplex mode of this ESM port. Note: GigaEthernet supports only Full duplex mode. Default value for 10/100 = Half duplex mode." ::= { esmConfEntry 4 } esmPortCfgSpeed OBJECT-TYPE SYNTAX INTEGER { speed100(1), speed10(2), speedAuto(3), speed1000(5), speed10000(6), speed40000(7), speedMax100(8), speedMax1000(9), speed2000(13), speed4000(14), speed8000(15), speedMax4000(16), speedMax8000(17) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured port line speed of this ESM port." ::= { esmConfEntry 5 } esmPortCfgDuplexMode OBJECT-TYPE SYNTAX INTEGER { fullDuplex(1), halfDuplex(2), autoDuplex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex." ::= { esmConfEntry 6 } esmPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state)." ::= { esmConfEntry 7 } esmPortLinkUpDownTrapEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enable(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disable(2) otherwise." ::= { esmConfEntry 8 } esmPortCfgMaxFrameSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the value of the maximum frame size allow. For 10Mbps the range is upto 1518 bytes. For ports with speed > 10Mbps the value can extend upto 9216 bytes." ::= { esmConfEntry 11 } esmPortAlias OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces." ::= { esmConfEntry 12 } esmPortCfgPause OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode for this interface. If auto-negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode. If auto-negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by auto-negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when auto-negotiation is later disabled. For more information on what pause values will be autonegotiated based on settings on this object, please refer to the truth table in the users manual. Note that the value of this object is ignored when the interface is not operating in full-duplex mode." ::= { esmConfEntry 13 } esmPortCfgAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow the user to enable or disable the port auto negotiation." DEFVAL { disable } ::= { esmConfEntry 15 } esmPortCfgCrossover OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdix(2), auto(3), notapplicable(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow the user to configure port crossover. This object is applicable only to copper ports. For fiber ports notapplicable is returned as a status." DEFVAL { auto } ::= { esmConfEntry 16 } esmPortCfgHybridActiveType OBJECT-TYPE SYNTAX INTEGER { notapplicable(0), fiber(1), copper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be different if esmPortCfgHybridMode is configured to be preferredFiber or preferredCopper) For non hybrid ports notapplicable is returned as a status." ::= { esmConfEntry 18 } esmPortCfgHybridMode OBJECT-TYPE SYNTAX INTEGER { notapplicable(0), preferredCopper(1), forcedCopper(2), preferredFiber(3), forcedFiber(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port should come up. The user can configure the port to come as copper only or fiber only or either fiber/copper (with preference to one of them)." DEFVAL { preferredFiber } ::= { esmConfEntry 19 } esmPortOperationalHybridType OBJECT-TYPE SYNTAX INTEGER { none(0), fiber(1), copper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing traffic. If link is not present the object will return none(0) value." ::= { esmConfEntry 20 } esmPortBcastRateLimitEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable per port broadcast traffic rate limit. When 'enable' value from esmPortBcastRateLimit object will be applicable to the ingressing broadcast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming broadcast traffic which is limited by the port speed." DEFVAL { enable } ::= { esmConfEntry 21 } esmPortBcastRateLimitType OBJECT-TYPE SYNTAX INTEGER { mbps(1), percentage(2), pps(3), default(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unit applicable to the value in esmPortBcastRateLimit object." DEFVAL { mbps } ::= { esmConfEntry 22 } esmPortBcastRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the maximum broadcast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed. It is mandatory to set esmPortBcastRateLimitType object along with esmPortBcastRateLimit object to set the broadcast rate limit." ::= { esmConfEntry 23 } esmPortMcastRateLimitEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable per port multicast traffic rate limit. When 'enable' value from esmPortMcastRateLimit object will be applicable to the ingressing multicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming multicast traffic which is limited by the port speed." DEFVAL { enable } ::= { esmConfEntry 24 } esmPortMcastRateLimitType OBJECT-TYPE SYNTAX INTEGER { mbps(1), percentage(2), pps(3), default(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unit applicable to the value in esmPortMcastRateLimit object." DEFVAL { mbps } ::= { esmConfEntry 25 } esmPortMcastRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the maximum multicast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed. It is mandatory to set esmPortMcastRateLimitType object along with esmPortMcastRateLimit object to set the multicast rate limit." ::= { esmConfEntry 26 } esmPortUucastRateLimitEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable per port unknown unicast traffic rate limit. When 'enable' value from esmPortUucastRateLimit object will be applicable to the ingressing unknown unicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming unknown unicast traffic which is limited by the port speed." DEFVAL { enable } ::= { esmConfEntry 27 } esmPortUucastRateLimitType OBJECT-TYPE SYNTAX INTEGER { mbps(1), percentage(2), pps(3), default(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unit applicable to the value in esmPortUucastRate object." DEFVAL { mbps } ::= { esmConfEntry 28 } esmPortUucastRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the maximum unknown unicast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed. It is mandatory to set esmPortUucastRateLimitType object along with esmPortUucastRateLimit object to set the unknown unicast rate limit." ::= { esmConfEntry 29 } esmPortIngressRateLimitEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable per port ingress traffic rate limit. When 'enable' value from esmPortIngressRate object will be applicable to the ingressing traffic (BC, MC, UUC) if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming traffic which is limited by the port speed." DEFVAL { enable } ::= { esmConfEntry 30 } esmPortIngressRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the maximum ingress traffic that can flow through the port. The actual value depends on the port speed if the configured value is greater than the current port speed." ::= { esmConfEntry 31 } esmPortIngressRateLimitBurst OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of ingress traffic burst size in Mbits." ::= { esmConfEntry 32 } esmPortEPPEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "use for port diagnostics" DEFVAL { disable } ::= { esmConfEntry 33 } esmPortEEEEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "10Gbase-T Energy Efficent Ethernet port parameter." DEFVAL { disable } ::= { esmConfEntry 34 } esmPortIsFiberChannelCapable OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port can be configured as Fiber Channel interface (yes) or can not be configured as Fiber Channel interface." DEFVAL { no } ::= { esmConfEntry 35 } esmPortBcastThresholdAction OBJECT-TYPE SYNTAX INTEGER { default(1), trap(2), shutdown(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port can be configured to send trap/shutdown if the threshold limit is crossed for Bcast Frames" DEFVAL { default } ::= { esmConfEntry 36 } esmPortMcastThresholdAction OBJECT-TYPE SYNTAX INTEGER { default(1), trap(2), shutdown(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port can be configured to send trap/shutdown if the threshold limit is crossed for Mcast Frames" DEFVAL { default } ::= { esmConfEntry 37 } esmPortUucastThresholdAction OBJECT-TYPE SYNTAX INTEGER { default(1), trap(2), shutdown(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port can be configured to send trap/shutdown if the threshold limit is crossed Unknown Unicast Frames" DEFVAL { default } ::= { esmConfEntry 38 } esmPortMinBcastRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of low threshold for bcast." ::= { esmConfEntry 39 } esmPortMinMcastRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of low threshold for mcast." ::= { esmConfEntry 40 } esmPortMinUucastRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of low threshold for uucast." ::= { esmConfEntry 41 } esmPortBcastStormState OBJECT-TYPE SYNTAX INTEGER { normal(1), storm(2), trap(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the port for broadcast Storm Control." DEFVAL { normal } ::= { esmConfEntry 42 } esmPortMcastStormState OBJECT-TYPE SYNTAX INTEGER { normal(1), storm(2), trap(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the port for multi-cast Storm Control." DEFVAL { normal } ::= { esmConfEntry 43 } esmPortUucastStormState OBJECT-TYPE SYNTAX INTEGER { normal(1), storm(2), trap(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the port for uucast Storm Control." DEFVAL { normal } ::= { esmConfEntry 44 } -- The Ethernet Statistics Group -- -- The ethernet statistics group contains statistics -- measured by the probe for each monitored interface on -- this device. These statistics take the form of free -- running counters that start from zero when a valid entry -- is created. -- -- This group currently has statistics defined only for -- Ethernet interfaces. Each alcetherStatsEntry contains -- statistics for one Ethernet interface. The probe must -- create one alcetherStats entry for each monitored Ethernet -- interface on the device. alcetherStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlcetherStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Ethernet statistics entries." ::= { physicalPort 2 } alcetherStatsEntry OBJECT-TYPE SYNTAX AlcetherStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named alcetherStatsPkts.1" INDEX { ifIndex } ::= { alcetherStatsTable 1 } AlcetherStatsEntry ::= SEQUENCE { alcetherClearStats INTEGER, alcetherLastClearStats TimeTicks, alcetherStatsCRCAlignErrors Counter64, alcetherStatsRxUndersizePkts Counter64, alcetherStatsTxUndersizePkts Counter64, alcetherStatsTxOversizePkts Counter64, alcetherStatsRxJabbers Counter64, alcetherStatsRxCollisions Counter64, alcetherStatsTxCollisions Counter64, alcetherStatsPkts64Octets Counter64, alcetherStatsPkts65to127Octets Counter64, alcetherStatsPkts128to255Octets Counter64, alcetherStatsPkts256to511Octets Counter64, alcetherStatsPkts512to1023Octets Counter64, alcetherStatsPkts1024to1518Octets Counter64, gigaEtherStatsPkts1519to4095Octets Counter64, gigaEtherStatsPkts4096to9215Octets Counter64, alcetherStatsPkts1519to2047Octets Counter64, alcetherStatsPkts2048to4095Octets Counter64, alcetherStatsPkts4096Octets Counter64, alcetherStatsRxGiantPkts Counter64, alcetherStatsRxDribbleNibblePkts Counter64, alcetherStatsRxLongEventPkts Counter64, alcetherStatsRxVlanTagPkts Counter64, alcetherStatsRxControlPkts Counter64, alcetherStatsRxLenChkErrPkts Counter64, alcetherStatsRxCodeErrPkts Counter64, alcetherStatsRxDvEventPkts Counter64, alcetherStatsRxPrevPktDropped Counter64, alcetherStatsTx64Octets Counter64, alcetherStatsTx65to127Octets Counter64, alcetherStatsTx128to255Octets Counter64, alcetherStatsTx256to511Octets Counter64, alcetherStatsTx512to1023Octets Counter64, alcetherStatsTx1024to1518Octets Counter64, alcetherStatsTx1519to2047Octets Counter64, alcetherStatsTx2048to4095Octets Counter64, alcetherStatsTx4096Octets Counter64, alcetherStatsTxRetryCount Counter64, alcetherStatsTxVlanTagPkts Counter64, alcetherStatsTxControlPkts Counter64, alcetherStatsTxLatePkts Counter64, alcetherStatsTxTotalBytesOnWire Counter64, alcetherStatsTxLenChkErrPkts Counter64, alcetherStatsTxExcDeferPkts Counter64 } alcetherClearStats OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to Clear all Statistics counters. By default, this object contains zero value." ::= { alcetherStatsEntry 1 } alcetherLastClearStats OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value." ::= { alcetherStatsEntry 2 } alcetherStatsCRCAlignErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error)." ::= { alcetherStatsEntry 3 } alcetherStatsRxUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { alcetherStatsEntry 4 } alcetherStatsTxUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { alcetherStatsEntry 5 } alcetherStatsTxOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { alcetherStatsEntry 6 } alcetherStatsRxJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms." ::= { alcetherStatsEntry 7 } alcetherStatsRxCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment (in reception). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected." ::= { alcetherStatsEntry 8 } alcetherStatsTxCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment (in transmition). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected." ::= { alcetherStatsEntry 9 } alcetherStatsPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { alcetherStatsEntry 10 } alcetherStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { alcetherStatsEntry 11 } alcetherStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { alcetherStatsEntry 12 } alcetherStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { alcetherStatsEntry 13 } alcetherStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { alcetherStatsEntry 14 } alcetherStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). For both Ethernet and GigaEthernet." ::= { alcetherStatsEntry 15 } gigaEtherStatsPkts1519to4095Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 1519 and 4095 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces" ::= { alcetherStatsEntry 16 } gigaEtherStatsPkts4096to9215Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 4096 and 9215 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces" ::= { alcetherStatsEntry 17 } alcetherStatsPkts1519to2047Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames(including error packets) received that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). " ::= { alcetherStatsEntry 18 } alcetherStatsPkts2048to4095Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames(including error packets) received that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). " ::= { alcetherStatsEntry 19 } alcetherStatsPkts4096Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames(including error packets) received that were greater than or equal to 4096 bytes in length inclusive (excluding framing bits but including FCS bytes). " ::= { alcetherStatsEntry 20 } alcetherStatsRxGiantPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames that are greater than the specified Max length value, with a valid CRC, dropped because too long. " ::= { alcetherStatsEntry 21 } alcetherStatsRxDribbleNibblePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames for which a dribble nibble has been received and CRC is correct. " ::= { alcetherStatsEntry 22 } alcetherStatsRxLongEventPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames for which the Carrier sense exceeds 50000 bit times for 10 Mbits/sec or 80000 bit times for 100 Mbits/sec." ::= { alcetherStatsEntry 23 } alcetherStatsRxVlanTagPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames for which Type/Length field contains the VLAN protocol identifier (0x8100). " ::= { alcetherStatsEntry 24 } alcetherStatsRxControlPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames that were recognized as control frames." ::= { alcetherStatsEntry 25 } alcetherStatsRxLenChkErrPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a type field." ::= { alcetherStatsEntry 26 } alcetherStatsRxCodeErrPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames for which one or more nibbles were signaled as errors during reception of the frame." ::= { alcetherStatsEntry 27 } alcetherStatsRxDvEventPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames for which a RX_DV event (packet not too long enough to be valid packet) has been seen before the correct frame." ::= { alcetherStatsEntry 28 } alcetherStatsRxPrevPktDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames for which a packet has been dropped (because of too small IFG) before the correct frame." ::= { alcetherStatsEntry 29 } alcetherStatsTx64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames of 64 bytes." ::= { alcetherStatsEntry 30 } alcetherStatsTx65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 31 } alcetherStatsTx128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 32 } alcetherStatsTx256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 33 } alcetherStatsTx512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 34 } alcetherStatsTx1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 35 } alcetherStatsTx1519to2047Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 36 } alcetherStatsTx2048to4095Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 37 } alcetherStatsTx4096Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were greater than or equal to 4096 bytes in length and less than Max frame length (excluding framing bits but including FCS bytes)." ::= { alcetherStatsEntry 38 } alcetherStatsTxRetryCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of collisions that the frames faced during transmission attempts." ::= { alcetherStatsEntry 39 } alcetherStatsTxVlanTagPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames for which Type/Length field contains the VLAN protocol identifier (0x8100)." ::= { alcetherStatsEntry 40 } alcetherStatsTxControlPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames that were recognised as control frames." ::= { alcetherStatsEntry 41 } alcetherStatsTxLatePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of late collisions that occured beyond the collision window." ::= { alcetherStatsEntry 42 } alcetherStatsTxTotalBytesOnWire OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes transmitted on wire, including all bytes from collided attempts." ::= { alcetherStatsEntry 43 } alcetherStatsTxLenChkErrPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a Type field." ::= { alcetherStatsEntry 44 } alcetherStatsTxExcDeferPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames that were deferred in excess of 6071 nibble-times in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This stat is only in case of Half duplex and excessive defer bit reset)." ::= { alcetherStatsEntry 45 } -- Link Aggregation Statistics ***************************** -- The Link Aggregation Statistics Group -- -- The link aggregation statistics group contains statistics -- measured by the probe for each monitored Link Aggregation (lag) -- on this device. These statistics take the form of free -- running counters that start from zero when a valid entry -- is created. -- -- This group currently has statistics defined only for -- lag interfaces. Each alcLagStatsEntry contains -- statistics for one link aggregation interface. The probe must -- create one alcLagStats entry for each monitored link aggregation -- interface on the device. alcLagStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlcLagStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Aggregation statistics entries." ::= { linkAggPort 1 } alcLagStatsEntry OBJECT-TYPE SYNTAX AlcLagStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics kept for a particular Link Aggregation interface. alclnkaggAggIndex is defined in alclnkaggAggTable; it is of SYNTAX InterfaceIndex (aka ifIndex) starting at value 40000001 for link agg 1. Index values received outside of the range for link aggregation interfaces will return an error." INDEX { alclnkaggAggIndex } ::= { alcLagStatsTable 1 } AlcLagStatsEntry ::= SEQUENCE { alcLagClearStats INTEGER } alcLagClearStats OBJECT-TYPE SYNTAX INTEGER { none(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to Clear all Link Aggregation Statistics counters. New stats collection starts immediately. No meaningful read on this object." DEFVAL { none } ::= { alcLagStatsEntry 1 } -- Ethernet Driver Tables ***************************** -- EsmHybridConf table contains the configuration -- information about the configured inactive media for the -- hybrid port only. -- Implementation of this group is mandantory. -- -- Note that entries in this MIB Table can NOT be created by the user, only modified esmHybridConfTable OBJECT-TYPE SYNTAX SEQUENCE OF EsmHybridConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of inactive hybrid port instances." ::= { physicalPort 3 } esmHybridConfEntry OBJECT-TYPE SYNTAX EsmHybridConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A ESM Physical Port entry." INDEX { ifIndex } ::= { esmHybridConfTable 1 } EsmHybridConfEntry ::= SEQUENCE { esmHybridPortCfgSpeed INTEGER, esmHybridPortCfgDuplexMode INTEGER, esmHybridPortCfgAutoNegotiation INTEGER, esmHybridPortCfgCrossover INTEGER, esmHybridPortCfgFlow INTEGER, esmHybridPortCfgInactiveType INTEGER } esmHybridPortCfgSpeed OBJECT-TYPE SYNTAX INTEGER { speed100(1), speed10(2), speedAuto(3), speed1000(5), speed10000(6), speedMax100(8), speedMax1000(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured port line speed of this ESM port." ::= { esmHybridConfEntry 1 } esmHybridPortCfgDuplexMode OBJECT-TYPE SYNTAX INTEGER { fullDuplex(1), halfDuplex(2), autoDuplex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex." ::= { esmHybridConfEntry 2 } esmHybridPortCfgAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow the user to enable or disable the port auto negotiation." DEFVAL { disable } ::= { esmHybridConfEntry 3 } esmHybridPortCfgCrossover OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdix(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow the user to configure port crossover." DEFVAL { auto } ::= { esmHybridConfEntry 4 } esmHybridPortCfgFlow OBJECT-TYPE SYNTAX INTEGER { disable(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode object in dot3PauseTable. It is used to configure pause for fiber media." DEFVAL { disable } ::= { esmHybridConfEntry 5 } esmHybridPortCfgInactiveType OBJECT-TYPE SYNTAX INTEGER { fiber(1), copper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is only applicable to hybrid ports . It indicates the configured inactive media type." ::= { esmHybridConfEntry 6 } -- Digital Diagnostics Monitoring (DDM) ************************** ddmConfig OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables DDM software feature in the system." DEFVAL { disable } ::= { ddmConfiguration 1 } ddmTrapConfig OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This objects enables/disables traps for DDM warning/alarm threshold violations." DEFVAL { disable } ::= { ddmConfiguration 2 } ddmNotificationType OBJECT-TYPE SYNTAX INTEGER { clearViolation(1), highAlarm(2), highWarning(3), lowWarning(4), lowAlarm(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object defines the trap type for monitored DDM parameters." ::= { ddmConfiguration 3 } ddmInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF DdmEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The ddmInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components." ::= { physicalPort 5 } ddmInfoEntry OBJECT-TYPE SYNTAX DdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system." INDEX { ifIndex } ::= { ddmInfoTable 1} DdmEntry ::= SEQUENCE { ddmTemperature Integer32, ddmTempLowWarning Integer32, ddmTempLowAlarm Integer32, ddmTempHiWarning Integer32, ddmTempHiAlarm Integer32, ddmSupplyVoltage Integer32, ddmSupplyVoltageLowWarning Integer32, ddmSupplyVoltageLowAlarm Integer32, ddmSupplyVoltageHiWarning Integer32, ddmSupplyVoltageHiAlarm Integer32, ddmTxBiasCurrent Integer32, ddmTxBiasCurrentLowWarning Integer32, ddmTxBiasCurrentLowAlarm Integer32, ddmTxBiasCurrentHiWarning Integer32, ddmTxBiasCurrentHiAlarm Integer32, ddmTxOutputPower Integer32, ddmTxOutputPowerLowWarning Integer32, ddmTxOutputPowerLowAlarm Integer32, ddmTxOutputPowerHiWarning Integer32, ddmTxOutputPowerHiAlarm Integer32, ddmRxOpticalPower Integer32, ddmRxOpticalPowerLowWarning Integer32, ddmRxOpticalPowerLowAlarm Integer32, ddmRxOpticalPowerHiWarning Integer32, ddmRxOpticalPowerHiAlarm Integer32 } ddmTemperature OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTemperature indicates the current temperature of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 1 } ddmTempLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempLowWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 2 } ddmTempLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempLowAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 3 } ddmTempHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempHiWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 4 } ddmTempHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempHiAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 5 } ddmSupplyVoltage OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltage indicates the current supply voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 6 } ddmSupplyVoltageLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 7 } ddmSupplyVoltageLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 8 } ddmSupplyVoltageHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 9 } ddmSupplyVoltageHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 10 } ddmTxBiasCurrent OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 11 } ddmTxBiasCurrentLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 12 } ddmTxBiasCurrentLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 13 } ddmTxBiasCurrentHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 14 } ddmTxBiasCurrentHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 15 } ddmTxOutputPower OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPower indicates the current Output Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 16 } ddmTxOutputPowerLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 17 } ddmTxOutputPowerLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 18 } ddmTxOutputPowerHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 19 } ddmTxOutputPowerHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 20 } ddmRxOpticalPower OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 21 } ddmRxOpticalPowerLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 22 } ddmRxOpticalPowerLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 23 } ddmRxOpticalPowerHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 24 } ddmRxOpticalPowerHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmInfoEntry 25 } ddmPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF DdmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ddmPortInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex and port channel. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components." ::= { physicalPort 6 } ddmPortInfoEntry OBJECT-TYPE SYNTAX DdmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system." INDEX { ifIndex, ddmPortChannel } ::= { ddmPortInfoTable 1} DdmPortEntry ::= SEQUENCE { ddmPortChannel Integer32, ddmPortTemperature Integer32, ddmPortTempLowWarning Integer32, ddmPortTempLowAlarm Integer32, ddmPortTempHiWarning Integer32, ddmPortTempHiAlarm Integer32, ddmPortSupplyVoltage Integer32, ddmPortSupplyVoltageLowWarning Integer32, ddmPortSupplyVoltageLowAlarm Integer32, ddmPortSupplyVoltageHiWarning Integer32, ddmPortSupplyVoltageHiAlarm Integer32, ddmPortTxBiasCurrent Integer32, ddmPortTxBiasCurrentLowWarning Integer32, ddmPortTxBiasCurrentLowAlarm Integer32, ddmPortTxBiasCurrentHiWarning Integer32, ddmPortTxBiasCurrentHiAlarm Integer32, ddmPortTxOutputPower Integer32, ddmPortTxOutputPowerLowWarning Integer32, ddmPortTxOutputPowerLowAlarm Integer32, ddmPortTxOutputPowerHiWarning Integer32, ddmPortTxOutputPowerHiAlarm Integer32, ddmPortRxOpticalPower Integer32, ddmPortRxOpticalPowerLowWarning Integer32, ddmPortRxOpticalPowerLowAlarm Integer32, ddmPortRxOpticalPowerHiWarning Integer32, ddmPortRxOpticalPowerHiAlarm Integer32 } ddmPortChannel OBJECT-TYPE SYNTAX Integer32 (1..4) UNITS "QSFP/SFP channel number" MAX-ACCESS read-only STATUS current DESCRIPTION "The channel number of the data that is being read. In the case of a QSFP there will be 4 10 gigabyte channels, for SFP/XFP there will only be one." ::= { ddmPortInfoEntry 1 } ddmPortTemperature OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTemperature indicates the current temperature of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 2 } ddmPortTempLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempLowWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 3 } ddmPortTempLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempLowAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 4 } ddmPortTempHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempHiWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 5 } ddmPortTempHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -150000..150000) UNITS "thousandth of a degree celcius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTempHiAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 6 } ddmPortSupplyVoltage OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltage indicates the current supply voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 7 } ddmPortSupplyVoltageLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 8 } ddmPortSupplyVoltageLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 9 } ddmPortSupplyVoltageHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 10 } ddmPortSupplyVoltageHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 11 } ddmPortTxBiasCurrent OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 12 } ddmPortTxBiasCurrentLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 13 } ddmPortTxBiasCurrentLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 14 } ddmPortTxBiasCurrentHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 15 } ddmPortTxBiasCurrentHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | 0..10000) UNITS "thousandth of a milli-Ampere" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 16 } ddmPortTxOutputPower OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPower indicates the current Output Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 17 } ddmPortTxOutputPowerLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 18 } ddmPortTxOutputPowerLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 19 } ddmPortTxOutputPowerHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 20 } ddmPortTxOutputPowerHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 21 } ddmPortRxOpticalPower OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 22 } ddmPortRxOpticalPowerLowWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 23 } ddmPortRxOpticalPowerLowAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 24 } ddmPortRxOpticalPowerHiWarning OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 25 } ddmPortRxOpticalPowerHiAlarm OBJECT-TYPE SYNTAX Integer32 (-200000 | -40000..10000) UNITS "thousandth of a dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ddmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable." ::= { ddmPortInfoEntry 26 } -- The Fiber Channel Statistics Group -- -- The fiber channel statistics group contains statistics -- measured by the probe for each monitored interface on -- this device. These statistics take the form of free -- running counters that start from zero when a valid entry -- is created. -- -- This group currently has statistics defined only for -- Fiber Channel interfaces. Each alcfcStatsEntry contains -- statistics for one Fiber Channel interface. The probe must -- create one alcfcStats entry for each monitored Fiber Channel -- interface on the device. alcfcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlcfcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Fiber Channel statistics entries." ::= { physicalPort 7 } alcfcStatsEntry OBJECT-TYPE SYNTAX AlcfcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics kept for a particular Fiber Channel interface. As an example, an instance of the fcStatsPkts object might be named alcfcStatsPkts.1" INDEX { ifIndex } ::= { alcfcStatsTable 1 } AlcfcStatsEntry ::= SEQUENCE { alcfcClearStats INTEGER, alcfcLastClearStats TimeTicks, alcfcStatsRxUndersizePkts Counter64, alcfcStatsTxBBCreditZeros Counter64, alcfcStatsRxBBCreditZeros Counter64, alcfcStatsLinkFailures Counter64, alcfcStatsLossofSynchs Counter64, alcfcStatsLossofSignals Counter64, alcfcStatsPrimSeqProtocolErrors Counter64, alcfcStatsInvalidTxWords Counter64, alcfcStatsInvalidCRCs Counter64, alcfcStatsInvalidOrderedSets Counter64, alcfcStatsFrameTooLongs Counter64, alcfcStatsDelimiterErrors Counter64, alcfcStatsEncodingDisparityErrors Counter64, alcfcStatsOtherErrors Counter64 } alcfcClearStats OBJECT-TYPE SYNTAX INTEGER { default(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to Clear all Statistics counters. By default, this object contains zero value." ::= { alcfcStatsEntry 1 } alcfcLastClearStats OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value." ::= { alcfcStatsEntry 2 } alcfcStatsRxUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 36 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { alcfcStatsEntry 3 } alcfcStatsTxBBCreditZeros OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transitions in/out of the buffer-to-buffer credit zero state." ::= { alcfcStatsEntry 6 } alcfcStatsRxBBCreditZeros OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times RX BBCredit drops to zero." ::= { alcfcStatsEntry 7 } alcfcStatsLinkFailures OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link failures." ::= { alcfcStatsEntry 8 } alcfcStatsLossofSynchs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loss of word-sync detected." ::= { alcfcStatsEntry 9 } alcfcStatsLossofSignals OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loss of signals detected." ::= { alcfcStatsEntry 10 } alcfcStatsPrimSeqProtocolErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of primitive sequence protocol errors detected." ::= { alcfcStatsEntry 11 } alcfcStatsInvalidTxWords OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid transmission words. This includes invalid ordered sets and invalid data words." ::= { alcfcStatsEntry 12 } alcfcStatsInvalidCRCs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received with an invalid CRC." ::= { alcfcStatsEntry 13 } alcfcStatsInvalidOrderedSets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid ordered sets received at this port." ::= { alcfcStatsEntry 14 } alcfcStatsFrameTooLongs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received at this port for which the frame length was greater than what was agreed to in FLOGI/PLOGI." ::= { alcfcStatsEntry 15 } alcfcStatsDelimiterErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid delimiters received" ::= { alcfcStatsEntry 16 } alcfcStatsEncodingDisparityErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of detected running disparity at 10b/8b level." ::= { alcfcStatsEntry 17 } alcfcStatsOtherErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of errors detected but not counted by any other error counter. This only includes RX frames drops due to zero RX BBCredits" ::= { alcfcStatsEntry 18 } -- Ethernet Driver Trap ********************* esmDrvTrapDropsLink NOTIFICATION-TYPE OBJECTS { esmPortSlot, esmPortIF, ifInErrors, ifOutErrors, esmDrvTrapDrops } STATUS current DESCRIPTION "When the Ethernet code drops the link because of excessive errors, a Trap is sent." ::= { alcatelIND1PortNotifications 1 } -- DDM TRAPS **************************** ddmTemperatureThresholdViolated NOTIFICATION-TYPE OBJECTS { ifIndex, ddmNotificationType, ddmTemperature } STATUS current DESCRIPTION "This object notifies management station if an SFP/XFP/SFP+ temperature has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ temperature." ::= { alcatelIND1PortNotifications 2 } ddmVoltageThresholdViolated NOTIFICATION-TYPE OBJECTS { ifIndex, ddmNotificationType, ddmSupplyVoltage } STATUS current DESCRIPTION "This object notifies management station if an SFP/XFP/SFP+ supply voltage has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ supply voltage." ::= { alcatelIND1PortNotifications 3 } ddmCurrentThresholdViolated NOTIFICATION-TYPE OBJECTS { ifIndex, ddmNotificationType, ddmTxBiasCurrent } STATUS current DESCRIPTION "This object notifies management station if an SFP/XFP/SFP+ Tx bias current has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx bias current." ::= { alcatelIND1PortNotifications 4 } ddmTxPowerThresholdViolated NOTIFICATION-TYPE OBJECTS { ifIndex, ddmNotificationType, ddmTxOutputPower } STATUS current DESCRIPTION "This object notifies management station if an SFP/XFP/SFP+ Tx output power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx output power." ::= { alcatelIND1PortNotifications 5 } ddmRxPowerThresholdViolated NOTIFICATION-TYPE OBJECTS { ifIndex, ddmNotificationType, ddmRxOpticalPower } STATUS current DESCRIPTION "This object notifies management station if an SFP/XFP/SFP+ Rx optical power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Rx optical power." ::= { alcatelIND1PortNotifications 6 } -- -- The Port Violation Table shows if the table has any violations set -- portViolationTable OBJECT-TYPE SYNTAX SEQUENCE OF PortViolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the port Violations per port." ::= { portViolations 1 } portViolationEntry OBJECT-TYPE SYNTAX PortViolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Violation Entry. The entries in this table are indexed by 3 units, 1. ifIndex of the port for which the violation is set 2. source of the violation, the feature or module 3. reason for the violation (sub reason under each source)." INDEX { portViolationIfIndex, portViolationSource, portViolationReason } ::= { portViolationTable 1 } PortViolationEntry ::= SEQUENCE { portViolationIfIndex InterfaceIndex, portViolationSource INTEGER, portViolationReason INTEGER, portViolationAction INTEGER, portViolationTimer TimeTicks, portViolationTimerAction INTEGER, portViolationClearPort INTEGER, portViolationCfgRecoveryMax Integer32, portViolationCfgRetryTime Integer32, portViolationRetryRemain Integer32 } portViolationIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IfIndex of the port that has a violation." ::= { portViolationEntry 1 } portViolationSource OBJECT-TYPE SYNTAX INTEGER { ag (1), qos (2), netsec (3), udld (4), nisup (5), oam (6), lfp(8), lm(9), lbd(10), spb(11), storm(12), stormuucast(13), lldp(14) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the source of the port violation. The source is the feature or module that has caused the violation. The list is given below 1. Initiated by Access Guardian 2. Initiated by QOS Policy 3. Initiated by Net Sec 4. Initiated by UDLD 5. Initiated by NI supervison (Fabric Stability). 6. initiated by OAM 8. initiated by LFP 9. initiated by Link Monitor 10. initiated by LBD 11. initiated by SPB 12. initiated by ESM 13. initiated by ESM 14. initiated by LLDP When there is no value the value of this will be 0" ::= { portViolationEntry 2 } portViolationReason OBJECT-TYPE SYNTAX INTEGER { pvSLLpsShutDown(1), pvSLLpsRestrict(2), pvQosPolicy(3), pvQosSpoofed(4), pvQosBpdu(5), pvQosBgp(6), pvQosOspf(7), pvQosRip(8), pvQosVrrp(9), pvQosDhcp(10), pvQosPim(11), pvQosIsis(12), pvQosDnsReply(13), pvUdld(14), pvOamRfp(15), pvAgLpsDiscard(16), pvLfpShutDown(17), pvLmThreshold(18), pvLbd(19), pvQosDvmrp(20), pvSpbRfp(21), pvEsmStorm(22), pvEsmStormUucast(23), pvLldpShutDown(24), pvRemoteLbd(25) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Reason for the port violation. This will be application specific. The Reason indicate the violation for the 1st Violation that happened on this port." ::= { portViolationEntry 3 } portViolationAction OBJECT-TYPE SYNTAX INTEGER { portDown (1), portAdminDown(2), portTimerDown (3), portTimerAdminDown (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The action determines on violation, what action will taken. Either the port would be shutdown or Admin Down or wait for the timer to expire and the timerAction will determine what needs to be done. " ::= { portViolationEntry 4 } portViolationTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If any timer is associated with the violation This is Zero if no timer is associated." ::= { portViolationEntry 5 } portViolationTimerAction OBJECT-TYPE SYNTAX INTEGER { portNoTimerAction(0), portDownAfterTimer (1), portUpAfterTimer(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Timer related action. If set to portDownAfterTimer, no operation will be performed on the port and the port will be shutdown after timer expiry. If set to portUpAfterTimer the port will be shutdown immediately and after the timer expiry the port will brought up.." ::= { portViolationEntry 6 } portViolationClearPort OBJECT-TYPE SYNTAX INTEGER { inactive(0), set(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this MIB object is set all violation on the given port will be cleared. The Indices portViolationSource and portViolationReason should be set to 0" ::= { portViolationEntry 7 } portViolationCfgRecoveryMax OBJECT-TYPE SYNTAX Integer32 (-1..50) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum attempts for auto-recovery as configured for the ifindex in alaPvrRecoveryMax. Value 0 means auto recovery is disabled for this port. Value -1 means auto recovery will retry infinitely. " ::= { portViolationEntry 8 } portViolationCfgRetryTime OBJECT-TYPE SYNTAX Integer32 (30..600) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in seconds) between auto-recovery attempts as configured for the ifindex in alaPvrRetryTime. " ::= { portViolationEntry 9 } portViolationRetryRemain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remaining auto-recovery attempts. Value -1 means there are infinite retries remaining. " ::= { portViolationEntry 10 } alaLinkMonConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaLinkMonConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Monitoring Configuration Parameters" ::= { portViolations 2 } alaLinkMonConfigEntry OBJECT-TYPE SYNTAX AlaLinkMonConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of Link Monitoring configurations kept for a particular Ethernet interface." INDEX { ifIndex } ::= { alaLinkMonConfigTable 1 } AlaLinkMonConfigEntry ::= SEQUENCE { alaLinkMonStatus INTEGER, alaLinkMonTimeWindow Integer32, alaLinkMonLinkFlapThreshold Integer32, alaLinkMonLinkErrorThreshold Integer32, alaLinkMonWaitToRestoreTimer Integer32, alaLinkMonWaitToShutdownTimer Integer32 } alaLinkMonStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the user to enable or disable Link Monitoring on the port." DEFVAL { disable } ::= { alaLinkMonConfigEntry 1} alaLinkMonTimeWindow OBJECT-TYPE SYNTAX Integer32(10..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of seconds the Link will be monitored for a port." DEFVAL { 300 } ::= { alaLinkMonConfigEntry 2} alaLinkMonLinkFlapThreshold OBJECT-TYPE SYNTAX Integer32(2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicaes the number of link flaps allowed for the specified port during the time window before the port is shutdown." DEFVAL { 5 } ::= { alaLinkMonConfigEntry 3} alaLinkMonLinkErrorThreshold OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of link errors allowed on Rx for the specified port during the time window before the port is shutdown. The errors are the MAC errors that include CRC, lost frames, error frames, alignment frames." DEFVAL { 5 } ::= { alaLinkMonConfigEntry 4 } alaLinkMonWaitToRestoreTimer OBJECT-TYPE SYNTAX Integer32(0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of seconds after which the link up event is notified to other applications. The timer is started whenever a Link Up is detected on a port being monitored." DEFVAL { 0 } ::= { alaLinkMonConfigEntry 5 } alaLinkMonWaitToShutdownTimer OBJECT-TYPE SYNTAX Integer32(0..3000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of milli seconds after which the link down event is notified to other applications. The timer is started whenever a Link down is detected on a port being monitored." DEFVAL { 0 } ::= { alaLinkMonConfigEntry 6 } alaLinkMonStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaLinkMonStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Monitoring Statistics" ::= { portViolations 3 } alaLinkMonStatsEntry OBJECT-TYPE SYNTAX AlaLinkMonStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of Link Monitoring statistics for a particular Ethernet interface." INDEX { ifIndex } ::= { alaLinkMonStatsTable 1 } AlaLinkMonStatsEntry ::= SEQUENCE { alaLinkMonStatsClearStats INTEGER, alaLinkMonStatsPortState INTEGER, alaLinkMonStatsCurrentLinkFlaps Counter64, alaLinkMonStatsCurrentErrorFrames Counter64, alaLinkMonStatsCurrentCRCErrors Counter64, alaLinkMonStatsCurrentLostFrames Counter64, alaLinkMonStatsCurrentAlignErrors Counter64, alaLinkMonStatsCurrentLinkErrors Counter64, alaLinkMonStatsTotalLinkFlaps Counter64, alaLinkMonStatsTotalLinkErrors Counter64 } alaLinkMonStatsClearStats OBJECT-TYPE SYNTAX INTEGER { default(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to Clear all Statistics counters. The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port. By default, this object contains zero value." DEFVAL {default} ::= { alaLinkMonStatsEntry 1 } alaLinkMonStatsPortState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), shutdown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the port. up(1) means the port is physically up, down(2) means the port is physically down, shutdown(3) means the interface is shutdown because of excessive link flaps or link errors." ::= { alaLinkMonStatsEntry 2 } alaLinkMonStatsCurrentLinkFlaps OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Link flaps in the current time window." ::= { alaLinkMonStatsEntry 3 } alaLinkMonStatsCurrentErrorFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of error frames in the current time window." ::= { alaLinkMonStatsEntry 4 } alaLinkMonStatsCurrentCRCErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of CRC errors in the current time window." ::= { alaLinkMonStatsEntry 5 } alaLinkMonStatsCurrentLostFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Rx Lost frames in the current time window." ::= { alaLinkMonStatsEntry 6 } alaLinkMonStatsCurrentAlignErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Rx alignment frames in the current time window." ::= { alaLinkMonStatsEntry 7 } alaLinkMonStatsCurrentLinkErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the sum of all the MAC Errors within the current time window. i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, alaLinkMonCurrentLosFrames, alaLinkMonStatsCurrentAlignErrors." ::= { alaLinkMonStatsEntry 8 } alaLinkMonStatsTotalLinkFlaps OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of link flaps across all the time windows." ::= { alaLinkMonStatsEntry 9 } alaLinkMonStatsTotalLinkErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of link errors across all the time windows." ::= { alaLinkMonStatsEntry 10 } alaLFPGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaLFPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Fault Propagation Grooups and their status" ::= { portViolations 4 } alaLFPGroupEntry OBJECT-TYPE SYNTAX AlaLFPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of Link Fault Propagation group id and status for each group" INDEX { alaLFPGroupId } ::= { alaLFPGroupTable 1 } AlaLFPGroupEntry ::= SEQUENCE { alaLFPGroupId Integer32, alaLFPGroupAdminStatus INTEGER, alaLFPGroupOperStatus INTEGER, alaLFPGroupWaitToShutdown Integer32, alaLFPGroupRowStatus RowStatus } alaLFPGroupId OBJECT-TYPE SYNTAX Integer32(1 .. 8 ) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the unique group id for Link Fault Propagation (LFP)." ::= { alaLFPGroupEntry 1 } alaLFPGroupAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the admin status of the group. disable(2) means link fault propagation, is disbaled. enable(1) means link fault propagation is enabled" DEFVAL { disable } ::= { alaLFPGroupEntry 2 } alaLFPGroupOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operational status of the group. down(2) means all the source ports are down, up(1) means atleast one source port in the group is up." ::= { alaLFPGroupEntry 3 } alaLFPGroupWaitToShutdown OBJECT-TYPE SYNTAX Integer32(0 .. 300) MAX-ACCESS read-create STATUS current DESCRIPTION "0 - Disable wait to shutdown timer 5 - 300 - after expiry of this timer all destination ports will be shutdown" DEFVAL { 0 } ::= { alaLFPGroupEntry 4 } alaLFPGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for initiating a MIB retrieval request." ::= { alaLFPGroupEntry 5 } alaLFPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaLFPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Fault Propagation port and port type of each LFP group" ::= { portViolations 5 } alaLFPConfigEntry OBJECT-TYPE SYNTAX AlaLFPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Fault Propagation port and port type of each LFP group" INDEX { alaLFPGroupId, alaLFPConfigPort } ::= { alaLFPConfigTable 1 } AlaLFPConfigEntry ::= SEQUENCE { alaLFPConfigPort InterfaceIndex, alaLFPConfigPortType INTEGER, alaLFPConfigRowStatus RowStatus } alaLFPConfigPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates ifindex of source/destination port for a LFP Group." ::= { alaLFPConfigEntry 1 } alaLFPConfigPortType OBJECT-TYPE SYNTAX INTEGER { destination (1), source (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of port, (1) means the port is destination port and (2) means the port is a destination port for a LFP Group." ::= { alaLFPConfigEntry 2 } alaLFPConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for initiating a MIB retrieval request." ::= { alaLFPConfigEntry 3 } alaPvrGlobalConfigObjects OBJECT IDENTIFIER ::= { portViolations 6 } alaPvrGlobalRecoveryMax OBJECT-TYPE SYNTAX Integer32 (-1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Auto violation recovery maximum attempts. Value 0 means auto recovery is disabled for any ports using this global value. Value -1 means auto recovery will retry infinitely for any ports using this global value. " DEFVAL { 10 } ::= { alaPvrGlobalConfigObjects 1 } alaPvrGlobalRetryTime OBJECT-TYPE SYNTAX Integer32 (30..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time (in seconds) between auto violation recovery attempts for any ports using this global value." DEFVAL { 300 } ::= { alaPvrGlobalConfigObjects 2 } alaPvrGlobalTrapEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto violation recovery global trap configuration" DEFVAL { enable } ::= { alaPvrGlobalConfigObjects 3 } alaPvrConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPvrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of auto violation recovery configuration parameters" ::= { portViolations 7 } alaPvrConfigEntry OBJECT-TYPE SYNTAX AlaPvrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Auto violation recovery configuration parameters" INDEX { ifIndex } ::= { alaPvrConfigTable 1 } AlaPvrConfigEntry ::= SEQUENCE { alaPvrRecoveryMax Integer32, alaPvrRetryTime Integer32 } alaPvrRecoveryMax OBJECT-TYPE SYNTAX Integer32 (-2..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Per port maximum auto violation recovery maximum attempts. Value -2 means use value from alaPvrGlobalRecoveryMax Value -1 means retry infinitely. Value 0 means disable this port. Values 1 to 50 mean 1 to 50 auto violation recovery attempts. " DEFVAL { -2 } ::= { alaPvrConfigEntry 1 } alaPvrRetryTime OBJECT-TYPE SYNTAX Integer32 (-2 | 30..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Per port time (in seconds) between auto violation recovery attempts. Value -2 means use value from alaPvrGlobalRetryTime. " DEFVAL { -2 } ::= { alaPvrConfigEntry 2 } alaPortViolationTrapObjects OBJECT IDENTIFIER ::= { portViolations 8 } portViolationRecoveryReason OBJECT-TYPE SYNTAX INTEGER { unknown (1), clearViolationCmd (2), recoveryTimer (3), adminUpDown (4), nativeRecoveryTimer (5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason for the recovery from port violation. It can be none (1): none. clearViolationCmd (2): Indicates that the port is recovered from clear violation command. recoveryTimer (3): Indicates that the port is recovered by Recovery Timer mechanism. adminUpDown (4): Indicates that the port is recovered from admin Up/Down. nativeRecoveryTimer (5): Indicates that the port is recovered from the feature that shutdown the interface." ::= { alaPortViolationTrapObjects 1 } -- -- Port Violation Traps -- portViolationTrap NOTIFICATION-TYPE OBJECTS { ifIndex, portViolationSource, portViolationReason } STATUS current DESCRIPTION "A Trap will be generated when a port violation occurs. The port violation trap will indicate the source of the violation and the reason for the violation." ::= { alcatelIND1PortNotifications 7 } portViolationNotificationTrap NOTIFICATION-TYPE OBJECTS { ifIndex, portViolationRecoveryReason } STATUS current DESCRIPTION "A Trap will be generated when a port violation is cleared. This trap will indicate the reason for the recovery from violation." ::= { alcatelIND1PortNotifications 8 } -- Dying Gasp Trap alaDyingGaspTrap NOTIFICATION-TYPE OBJECTS { alaDyingGaspChassisId, alaDyingGaspPowerSupplyType, alaDyingGaspTime } STATUS current DESCRIPTION "Dying Gasp trap." ::= { alcatelIND1PortNotifications 9 } -- Storm Control trap esmStormThresholdViolationStatus NOTIFICATION-TYPE OBJECTS { ifIndex, esmStormViolationThresholdNotificationType, esmStormViolationThresholdTrafficType } STATUS current DESCRIPTION "This object notifies management station if User-Port ports gets the ingress traffic inflow above the configured value." ::= { alcatelIND1PortNotifications 10 } -- TDR test Result Table -- This table stores the result of TDR test conducted on the copper port() -- The object esmTdrPortTest can be used by the user to initiate the TDR test -- All other objects are read only as length and states of the cable pairs can not be modified esmTdrPortTable OBJECT-TYPE SYNTAX SEQUENCE OF EsmTdrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the results of cable diagnostics." ::= {physicalPort 8} esmTdrPortEntry OBJECT-TYPE SYNTAX EsmTdrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to each port." INDEX { ifIndex } ::= { esmTdrPortTable 1 } EsmTdrPortEntry ::= SEQUENCE { esmTdrPortCableState CableState, esmTdrPortValidPairs Unsigned32, esmTdrPortPair1State CableState, esmTdrPortPair1Length Unsigned32, esmTdrPortPair2State CableState, esmTdrPortPair2Length Unsigned32, esmTdrPortPair3State CableState, esmTdrPortPair3Length Unsigned32, esmTdrPortPair4State CableState, esmTdrPortPair4Length Unsigned32, esmTdrPortFuzzLength Unsigned32, esmTdrPortTest INTEGER, esmTdrPortClearStats INTEGER, esmTdrPortResult INTEGER } esmTdrPortCableState OBJECT-TYPE SYNTAX CableState MAX-ACCESS read-only STATUS current DESCRIPTION "State of a cable as returned by the TDR test." ::= { esmTdrPortEntry 1 } esmTdrPortValidPairs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of wire pairs in the cable for which the results of this test are valid." ::= { esmTdrPortEntry 2 } esmTdrPortPair1State OBJECT-TYPE SYNTAX CableState MAX-ACCESS read-only STATUS current DESCRIPTION "The state for wire pair-1 of the cable as returned by the TDR test." ::= { esmTdrPortEntry 3 } esmTdrPortPair1Length OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length for wire pair-1 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise." ::= { esmTdrPortEntry 4 } esmTdrPortPair2State OBJECT-TYPE SYNTAX CableState MAX-ACCESS read-only STATUS current DESCRIPTION "The state for wire pair-2 of the cable as returned by the TDR test." ::= { esmTdrPortEntry 5 } esmTdrPortPair2Length OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length for wire pair-2 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise." ::= { esmTdrPortEntry 6 } esmTdrPortPair3State OBJECT-TYPE SYNTAX CableState MAX-ACCESS read-only STATUS current DESCRIPTION "The state for wire pair-3 of the cable as returned by the TDR test." ::= { esmTdrPortEntry 7 } esmTdrPortPair3Length OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length for wire pair-3 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise." ::= { esmTdrPortEntry 8 } esmTdrPortPair4State OBJECT-TYPE SYNTAX CableState MAX-ACCESS read-only STATUS current DESCRIPTION "The state for wire pair-4 of the cable as returned by the TDR test." ::= { esmTdrPortEntry 9 } esmTdrPortPair4Length OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length for wire pair-4 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise." ::= { esmTdrPortEntry 10 } esmTdrPortFuzzLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The error in the estimated length of the cable (as returned by TDR test)." ::= { esmTdrPortEntry 11 } esmTdrPortTest OBJECT-TYPE SYNTAX INTEGER{ off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Object used to start a TDR test on the port. When configured as on, it initiates a TDR test on the port. A read operation on this object always returns the value off." ::= { esmTdrPortEntry 12 } esmTdrPortClearStats OBJECT-TYPE SYNTAX INTEGER { default(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to Clear TDR stats. By default, this object contains zero value." ::= { esmTdrPortEntry 13 } esmTdrPortResult OBJECT-TYPE SYNTAX INTEGER { success(1), fail(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used to give the status of BCM API,whether API able to execute TDR test successfully or failed to executethe TDR test." ::= { esmTdrPortEntry 14 } -- ************************************************************************ -- Expansion of ifEntry -- ************************************************************************ interfaceStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF InterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Expansion for ifEntry." ::= { interfaceCounters 1 } interfaceStatsEntry OBJECT-TYPE SYNTAX InterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of interfaceStatsTable" AUGMENTS { ifEntry } ::= { interfaceStatsTable 1 } InterfaceStatsEntry ::= SEQUENCE { inBitsPerSec Counter64, outBitsPerSec Counter64, ifInPauseFrames Counter64, ifOutPauseFrames Counter64, ifInPktsPerSec Counter64, ifOutPktsPerSec Counter64 } inBitsPerSec OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of Bits Received per second" ::= { interfaceStatsEntry 1 } outBitsPerSec OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of Bits Transmitted per second" ::= { interfaceStatsEntry 2 } ifInPauseFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of Pause Frames Received per second" ::= { interfaceStatsEntry 3 } ifOutPauseFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of Pause Frames Transmitted per second" ::= { interfaceStatsEntry 4 } ifInPktsPerSec OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of Packet Received per second" ::= { interfaceStatsEntry 5 } ifOutPktsPerSec OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of Packets Transmitted per second" ::= { interfaceStatsEntry 6 } -- End of TDR Table -- This table holds the value of configured interface mode and -- operaional port mode. This table holds value for each port cage. esmPortModeTable OBJECT-TYPE SYNTAX SEQUENCE OF EsmPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface entries. This table contains Configured Port mode and operational port mode" ::= { physicalPort 9 } esmPortModeEntry OBJECT-TYPE SYNTAX EsmPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface with respect to port mode" INDEX { ifIndex } ::= { esmPortModeTable 1 } EsmPortModeEntry ::= SEQUENCE { esmConfiguredMode INTEGER, esmOperationalMode INTEGER } esmConfiguredMode OBJECT-TYPE SYNTAX INTEGER { mode40Gig(1), -- 40Gig mode mode4X10Gig(2), -- 10Gig mode, 4 ports modeAuto(3) -- 40G or 4X10G based on detection } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired mode of the interface. When a managed system initializes, all interfaces start with ifConfiguredMode in the Auto state. User is not allowed to configure this parameter for subport" DEFVAL { modeAuto } ::= { esmPortModeEntry 1 } esmOperationalMode OBJECT-TYPE SYNTAX INTEGER { mode40Gig(1), -- 40Gig mode mode4X10Gig(2) -- 10Gig mode, 4 ports } MAX-ACCESS read-only STATUS current DESCRIPTION " Operational mode of the port " ::= { esmPortModeEntry 2 } -- This table holds the value of configured interface beacon admin-state, Becon Led Color and -- Beacon Led Mode. This table holds value for each port cage. esmPortBeaconTable OBJECT-TYPE SYNTAX SEQUENCE OF EsmPortBeaconEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface entries. This table contains Beacon Admin State Beacon Led Color and Beacon Led mode" ::= { physicalPort 10 } esmPortBeaconEntry OBJECT-TYPE SYNTAX EsmPortBeaconEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface with respect to Beacon" INDEX { ifIndex } ::= { esmPortBeaconTable 1 } EsmPortBeaconEntry ::= SEQUENCE { esmBeaconAdminState INTEGER, esmBeaconLedColor INTEGER, esmBeaconLedMode INTEGER, esmBeaconRowStatus RowStatus } esmBeaconAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The beacon admin state of the interface. When a managed system initializes, all interfaces start with esmBeaconAdminState in disable state" DEFVAL { disable } ::= { esmPortBeaconEntry 1 } esmBeaconLedColor OBJECT-TYPE SYNTAX INTEGER { ledOff(1), -- Led in off state ledBlue(2), -- Led in Blue state ledGreen(3), -- Led in Green state ledAqua(4), -- Led in Aqua state ledRed(5), -- Led in Red state ledMagenta(6), -- Led in Magenta state ledYellow(7), -- Led in Yellow state ledWhite(8) -- Led in White state } MAX-ACCESS read-create STATUS current DESCRIPTION " Beacon Led Color of the port " DEFVAL { ledMagenta } ::= { esmPortBeaconEntry 2 } esmBeaconLedMode OBJECT-TYPE SYNTAX INTEGER { ledModeSolid(1), -- Led mode solid ledModeActivity(2) -- Led mode representing the normal mode operation } MAX-ACCESS read-create STATUS current DESCRIPTION " Beacon Led Mode of the port " DEFVAL { ledModeActivity } ::= { esmPortBeaconEntry 3 } esmBeaconRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status to control creation/deletion of the Beacon" ::= { esmPortBeaconEntry 4 } -- conformance information alcatelIND1PortMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1PortMIBConformance 1 } alcatelIND1PortMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1PortMIBConformance 2 } -- compliance statements esmConfPortCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the configuration of Ethernet ports." MODULE -- this module MANDATORY-GROUPS { esmConfMIBGroup, esmDetectedConfMIBGroup, alcPortNotificationGroup, ddmInfoGroup, ddmConfigGroup, ddmNotificationsGroup, esmConfTrapGroup, esmHybridConfEntryGroup, esmConfEntryGroup, csmConfTrapGroup, esmTdrPortGroup, portViolationEntryGroup, ddmPortInfoGroup, alaLinkMonConfigMIBGroup, alaLFPGroupMIBGroup, alaPvrGlobalConfigGroup, alaPvrConfigGroup, interfaceStatsMIBGroup, alaPortViolationTrapGroup } ::= { alcatelIND1PortMIBCompliances 1 } alcEtherStatsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the Statistics of the Ethernet ports." MODULE -- this module MANDATORY-GROUPS { alaLinkMonStatsMIBGroup, alaLFPConfigMIBGroup, alcEtherStatsMIBGroup, alcfcStatsGroup, esmPortFiberstatsGroup } ::= { alcatelIND1PortMIBCompliances 2 } alcLagStatsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the Statistics of the Link Aggregation ports." MODULE -- this module MANDATORY-GROUPS { alcLagStatsMIBGroup } ::= { alcatelIND1PortMIBCompliances 3 } -- units of conformance esmConfMIBGroup OBJECT-GROUP OBJECTS { esmPortCfgSpeed, esmPortCfgDuplexMode, esmPortCfgMaxFrameSize, esmPortCfgAutoNegotiation, esmPortCfgCrossover, esmPortCfgPause, esmPortBcastRateLimitEnable, esmPortBcastRateLimitType, esmPortBcastRateLimit, esmPortMcastRateLimitEnable, esmPortMcastRateLimitType, esmPortMcastRateLimit, esmPortUucastRateLimitEnable, esmPortUucastRateLimitType, esmPortUucastRateLimit, esmPortIngressRateLimitEnable, esmPortIngressRateLimit, esmPortIngressRateLimitBurst, esmPortEPPEnable, esmPortEEEEnable,esmPortBcastThresholdAction,esmPortMcastThresholdAction, esmPortUucastThresholdAction,esmPortMinBcastRateLimit,esmPortMinMcastRateLimit, esmPortMinUucastRateLimit,esmPortBcastStormState, esmPortMcastStormState, esmPortUucastStormState } STATUS current DESCRIPTION "A collection of objects to support the management of global configuration parameters of the Ethernet ports." ::= { alcatelIND1PortMIBGroups 1 } esmDetectedConfMIBGroup OBJECT-GROUP OBJECTS { esmPortAutoSpeed, esmPortAutoDuplexMode } STATUS current DESCRIPTION "A collection of objects to support the Detected configuration parameters of the Ethernet ports." ::= { alcatelIND1PortMIBGroups 2 } alcEtherStatsMIBGroup OBJECT-GROUP OBJECTS { alcetherClearStats, alcetherLastClearStats, alcetherStatsCRCAlignErrors, alcetherStatsRxUndersizePkts, alcetherStatsTxUndersizePkts, alcetherStatsTxOversizePkts, alcetherStatsRxJabbers, alcetherStatsRxCollisions, alcetherStatsTxCollisions, alcetherStatsPkts64Octets, alcetherStatsPkts65to127Octets, alcetherStatsPkts128to255Octets, alcetherStatsPkts256to511Octets, alcetherStatsPkts512to1023Octets, alcetherStatsPkts1024to1518Octets, gigaEtherStatsPkts1519to4095Octets, gigaEtherStatsPkts4096to9215Octets, alcetherStatsPkts1519to2047Octets, alcetherStatsPkts2048to4095Octets, alcetherStatsPkts4096Octets, alcetherStatsRxGiantPkts, alcetherStatsRxDribbleNibblePkts, alcetherStatsRxLongEventPkts, alcetherStatsRxVlanTagPkts, alcetherStatsRxControlPkts, alcetherStatsRxLenChkErrPkts, alcetherStatsRxCodeErrPkts, alcetherStatsRxDvEventPkts, alcetherStatsRxPrevPktDropped, alcetherStatsTx64Octets, alcetherStatsTx65to127Octets, alcetherStatsTx128to255Octets, alcetherStatsTx256to511Octets, alcetherStatsTx512to1023Octets, alcetherStatsTx1024to1518Octets, alcetherStatsTx1519to2047Octets, alcetherStatsTx2048to4095Octets, alcetherStatsTx4096Octets, alcetherStatsTxRetryCount, alcetherStatsTxVlanTagPkts, alcetherStatsTxControlPkts, alcetherStatsTxLatePkts, alcetherStatsTxTotalBytesOnWire, alcetherStatsTxLenChkErrPkts, alcetherStatsTxExcDeferPkts } STATUS current DESCRIPTION "A collection of objects to provide all the statistics related to the Ethernet and GigaEthernert ports." ::= { alcatelIND1PortMIBGroups 3 } alcPortNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { esmDrvTrapDropsLink, portViolationTrap, portViolationNotificationTrap, alaDyingGaspTrap, esmStormThresholdViolationStatus } STATUS current DESCRIPTION "The Port MIB Notification Group." ::= { alcatelIND1PortMIBGroups 4 } ddmInfoGroup OBJECT-GROUP OBJECTS { ddmTemperature, ddmTempLowWarning, ddmTempLowAlarm, ddmTempHiWarning, ddmTempHiAlarm, ddmSupplyVoltage, ddmSupplyVoltageLowWarning, ddmSupplyVoltageLowAlarm, ddmSupplyVoltageHiWarning, ddmSupplyVoltageHiAlarm, ddmTxBiasCurrent, ddmTxBiasCurrentLowWarning, ddmTxBiasCurrentLowAlarm, ddmTxBiasCurrentHiWarning, ddmTxBiasCurrentHiAlarm, ddmTxOutputPower, ddmTxOutputPowerLowWarning, ddmTxOutputPowerLowAlarm, ddmTxOutputPowerHiWarning, ddmTxOutputPowerHiAlarm, ddmRxOpticalPower, ddmRxOpticalPowerLowWarning, ddmRxOpticalPowerLowAlarm, ddmRxOpticalPowerHiWarning, ddmRxOpticalPowerHiAlarm, ddmPortChannel } STATUS current DESCRIPTION "A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s." ::= { alcatelIND1PortMIBGroups 6 } ddmConfigGroup OBJECT-GROUP OBJECTS { ddmConfig, ddmTrapConfig, ddmNotificationType } STATUS current DESCRIPTION "A collection of objects to allow configuration of DDM and DDM traps." ::= { alcatelIND1PortMIBGroups 7 } ddmNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { ddmTemperatureThresholdViolated, ddmVoltageThresholdViolated, ddmCurrentThresholdViolated, ddmTxPowerThresholdViolated, ddmRxPowerThresholdViolated } STATUS current DESCRIPTION "A collection of notifications used to indicate DDM threshold violations." ::= { alcatelIND1PortMIBGroups 8 } esmConfTrapGroup OBJECT-GROUP OBJECTS { esmDrvTrapDrops, alaDyingGaspChassisId, alaDyingGaspPowerSupplyType, alaDyingGaspTime, esmStormViolationThresholdNotificationType, esmStormViolationThresholdTrafficType } STATUS current DESCRIPTION "Partitioned port (separated due to errors)." ::= { alcatelIND1PortMIBGroups 9 } esmHybridConfEntryGroup OBJECT-GROUP OBJECTS { esmHybridPortCfgSpeed, esmHybridPortCfgDuplexMode, esmHybridPortCfgAutoNegotiation, esmHybridPortCfgCrossover, esmHybridPortCfgFlow, esmHybridPortCfgInactiveType } STATUS current DESCRIPTION "A list of inactive hybrid port instances." ::= { alcatelIND1PortMIBGroups 10 } esmConfEntryGroup OBJECT-GROUP OBJECTS { esmPortAdminStatus, esmPortAlias, esmPortCfgHybridActiveType, esmPortCfgHybridMode, esmPortIF, esmPortLinkUpDownTrapEnable, esmPortOperationalHybridType, esmPortSlot } STATUS current DESCRIPTION "A list of ESM Physical Port instances." ::= { alcatelIND1PortMIBGroups 11 } portViolationEntryGroup OBJECT-GROUP OBJECTS { portViolationAction, portViolationTimer, portViolationTimerAction, portViolationClearPort, portViolationCfgRecoveryMax, portViolationCfgRetryTime, portViolationRetryRemain } STATUS current DESCRIPTION "This table contains the port Violations per port." ::= { alcatelIND1PortMIBGroups 12 } ddmPortInfoGroup OBJECT-GROUP OBJECTS { ddmPortTemperature, ddmPortTempLowWarning, ddmPortTempLowAlarm, ddmPortTempHiWarning, ddmPortTempHiAlarm, ddmPortSupplyVoltage, ddmPortSupplyVoltageLowWarning, ddmPortSupplyVoltageLowAlarm, ddmPortSupplyVoltageHiWarning, ddmPortSupplyVoltageHiAlarm, ddmPortTxBiasCurrent, ddmPortTxBiasCurrentLowWarning, ddmPortTxBiasCurrentLowAlarm, ddmPortTxBiasCurrentHiWarning, ddmPortTxBiasCurrentHiAlarm, ddmPortTxOutputPower, ddmPortTxOutputPowerLowWarning, ddmPortTxOutputPowerLowAlarm, ddmPortTxOutputPowerHiWarning, ddmPortTxOutputPowerHiAlarm, ddmPortRxOpticalPower, ddmPortRxOpticalPowerLowWarning, ddmPortRxOpticalPowerLowAlarm, ddmPortRxOpticalPowerHiWarning, ddmPortRxOpticalPowerHiAlarm } STATUS current DESCRIPTION "A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s." ::= { alcatelIND1PortMIBGroups 13 } alaLinkMonConfigMIBGroup OBJECT-GROUP OBJECTS { alaLinkMonStatus, alaLinkMonTimeWindow, alaLinkMonLinkFlapThreshold, alaLinkMonLinkErrorThreshold, alaLinkMonWaitToRestoreTimer, alaLinkMonWaitToShutdownTimer } STATUS current DESCRIPTION "A collection of objects to support the Link Monitoring Configurations on the ports." ::= { alcatelIND1PortMIBGroups 14 } alaLinkMonStatsMIBGroup OBJECT-GROUP OBJECTS { alaLinkMonStatsClearStats, alaLinkMonStatsPortState, alaLinkMonStatsCurrentLinkFlaps, alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, alaLinkMonStatsCurrentLostFrames, alaLinkMonStatsCurrentAlignErrors, alaLinkMonStatsCurrentLinkErrors, alaLinkMonStatsTotalLinkFlaps, alaLinkMonStatsTotalLinkErrors } STATUS current DESCRIPTION "A collection of objects to provide all the statistics related to the Link Monitoring on the ports." ::= { alcatelIND1PortMIBGroups 15 } alaLFPGroupMIBGroup OBJECT-GROUP OBJECTS { alaLFPGroupId, alaLFPGroupAdminStatus, alaLFPGroupOperStatus, alaLFPGroupWaitToShutdown, alaLFPGroupRowStatus } STATUS current DESCRIPTION "A collection of objects to configure Link Fault Propagation Group, Wait to shutdown timer and admin staus of group." ::= { alcatelIND1PortMIBGroups 16 } alaLFPConfigMIBGroup OBJECT-GROUP OBJECTS { alaLFPConfigPort, alaLFPConfigPortType, alaLFPConfigRowStatus } STATUS current DESCRIPTION "A collection of objects to configure a port and port type for a Link Fault Propagation Group." ::= { alcatelIND1PortMIBGroups 17 } csmConfTrapGroup OBJECT-GROUP OBJECTS { alaDyingGaspChassisId, alaDyingGaspPowerSupplyType, alaDyingGaspTime } STATUS current DESCRIPTION "A collection of objects for chassis supervision traps" ::= { alcatelIND1PortMIBGroups 18 } esmTdrPortGroup OBJECT-GROUP OBJECTS { esmTdrPortCableState, esmTdrPortValidPairs, esmTdrPortPair1State, esmTdrPortPair1Length, esmTdrPortPair2State, esmTdrPortPair2Length, esmTdrPortPair3State, esmTdrPortPair3Length, esmTdrPortPair4State, esmTdrPortPair4Length, esmTdrPortFuzzLength, esmTdrPortTest, esmTdrPortClearStats, esmTdrPortResult } STATUS current DESCRIPTION "A collection of objects to provide TDR information" ::= { alcatelIND1PortMIBGroups 19 } alcfcStatsGroup OBJECT-GROUP OBJECTS { alcfcClearStats, alcfcLastClearStats, alcfcStatsDelimiterErrors, alcfcStatsEncodingDisparityErrors, alcfcStatsFrameTooLongs, alcfcStatsInvalidCRCs, alcfcStatsInvalidOrderedSets, alcfcStatsInvalidTxWords, alcfcStatsLinkFailures, alcfcStatsLossofSignals, alcfcStatsRxUndersizePkts, alcfcStatsTxBBCreditZeros, alcfcStatsLossofSynchs, alcfcStatsOtherErrors, alcfcStatsPrimSeqProtocolErrors, alcfcStatsRxBBCreditZeros } STATUS current DESCRIPTION "A collection of objects for chassis supervision traps" ::= { alcatelIND1PortMIBGroups 20 } esmPortFiberstatsGroup OBJECT-GROUP OBJECTS { esmPortIsFiberChannelCapable } STATUS current DESCRIPTION "A collection of objects for chassis supervision traps" ::= { alcatelIND1PortMIBGroups 21 } alaPvrGlobalConfigGroup OBJECT-GROUP OBJECTS { alaPvrGlobalRecoveryMax, alaPvrGlobalRetryTime, alaPvrGlobalTrapEnable } STATUS current DESCRIPTION "A collection of global pvr objects" ::= { alcatelIND1PortMIBGroups 22 } esmPortModeGroup OBJECT-GROUP OBJECTS { esmConfiguredMode, esmOperationalMode } STATUS current DESCRIPTION "A collection of objects for port splitter mode" ::= { alcatelIND1PortMIBGroups 23 } esmPortBeaconGroup OBJECT-GROUP OBJECTS { esmBeaconAdminState, esmBeaconLedColor, esmBeaconLedMode, esmBeaconRowStatus } STATUS current DESCRIPTION "A collection of objects for port Beacon " ::= { alcatelIND1PortMIBGroups 24 } alaPvrConfigGroup OBJECT-GROUP OBJECTS { alaPvrRecoveryMax, alaPvrRetryTime } STATUS current DESCRIPTION "A collection of pvr objects" ::= { alcatelIND1PortMIBGroups 25 } interfaceStatsMIBGroup OBJECT-GROUP OBJECTS { inBitsPerSec, outBitsPerSec, ifInPauseFrames, ifOutPauseFrames, ifInPktsPerSec, ifOutPktsPerSec } STATUS current DESCRIPTION "A collection of objects to display the interface counters details of the ports" ::= { alcatelIND1PortMIBGroups 26 } alaPortViolationTrapGroup OBJECT-GROUP OBJECTS { portViolationRecoveryReason } STATUS current DESCRIPTION "A collection of global pvr objects" ::= { alcatelIND1PortMIBGroups 27 } alcLagStatsMIBGroup OBJECT-GROUP OBJECTS { alcLagClearStats } STATUS current DESCRIPTION "A collection of link aggregation objects" ::= { alcatelIND1PortMIBGroups 28 } END