ALCATEL-IND1-RIP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, TimeTicks, Integer32 FROM SNMPv2-SMI rip2IfConfEntry FROM RIPv2-MIB RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF routingIND1Rip FROM ALCATEL-IND1-BASE; alcatelIND1RIPMIB MODULE-IDENTITY LAST-UPDATED "201010260000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO " Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Of Global RIP Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { routingIND1Rip 1 } alcatelIND1RIPMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Routing Information Protocol (RIP) Subsystem Managed Objects." ::= { alcatelIND1RIPMIB 1 } alcatelIND1RIPMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Routing Information Protocol (RIP) Subsystem Conformance Information." ::= { alcatelIND1RIPMIB 2 } alcatelIND1RIPMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Routing Information Protocol (RIP) Subsystem Units Of Conformance." ::= { alcatelIND1RIPMIBConformance 1 } alcatelIND1RIPMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch for Routing Information Protocol (RIP) Subsystem Compliance Statements." ::= { alcatelIND1RIPMIBConformance 2 } --******************************************************************** --************************ Textual Conventions *********************** --******************************************************************** AlaAuthenticationEncryptKey ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The authentication encryption key that is used to decypher RIP simple passwords." SYNTAX OCTET STRING (SIZE(16)) -- ************************************************************************ -- RIP Global Protocol configuration -- ************************************************************************ alaProtocolRip OBJECT IDENTIFIER ::= { alcatelIND1RIPMIBObjects 1 } alaRipProtoStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Global administration status of RIP." DEFVAL { disable } ::= { alaProtocolRip 1 } alaRipHostRouteSupport OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable support for host routes." DEFVAL { enable } ::= { alaProtocolRip 2 } alaRipRedistRouteTag OBJECT-TYPE SYNTAX Integer32 ( 0 .. 2147483647 ) MAX-ACCESS read-write STATUS current DESCRIPTION "A 32-bit value tagged to each RIP internal route while it is redistributed in to other routing protocol domains. The lower 16-bits typically indicate the autonomous system number." DEFVAL { 0 } ::= { alaProtocolRip 4 } alaRipForceHolddownTimer OBJECT-TYPE SYNTAX Integer32 ( 0 .. 120 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in seconds during which routing information regarding better paths is suppressed. A route enters into a forced holddown state when an update packet is received that indicates the route is unreachable and when this timer value is nonzero. After this timer has expired, if the value is less that 120 - the route enters a holddown state for the rest of the period until 120. During this time advertisements for better paths are accepted if any." ::= { alaProtocolRip 5 } alaRipRouteNumber OBJECT-TYPE SYNTAX Integer32 ( 0 .. 2147483647 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of network routes in RIP routing table." ::= { alaProtocolRip 6 } alaRipUpdateInterval OBJECT-TYPE SYNTAX Integer32 (1 .. 120) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Interval (in seconds) that RIP routing updates will be sent out. The value must be less than or equal to one-third the value of the invalid timer." DEFVAL { 30 } ::= { alaProtocolRip 13 } alaRipInvalidTimer OBJECT-TYPE SYNTAX Integer32 (3 .. 360) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds that a route will remain active in RIB before being moved to the invalid state. The value must be at least three times the update interval." DEFVAL { 180 } ::= { alaProtocolRip 14 } alaRipHolddownTimer OBJECT-TYPE SYNTAX Integer32 (0 .. 120) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time to keep a route in the holddown state." DEFVAL { 0 } ::= { alaProtocolRip 15 } alaRipGarbageTimer OBJECT-TYPE SYNTAX Integer32 (0 .. 180) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time to keep a route before garbage collection." DEFVAL { 120 } ::= { alaProtocolRip 16 } -- ************************************************************************ -- Expansion of rip2IfCOnf -- ************************************************************************ alaRip2IfConfAugTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRip2IfConfAugEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Expansion for rip2ifconftable" ::= { alaProtocolRip 11 } alaRip2IfConfAugEntry OBJECT-TYPE SYNTAX AlaRip2IfConfAugEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of alaRip2IfConfAugTable" AUGMENTS { rip2IfConfEntry } ::= { alaRip2IfConfAugTable 1 } AlaRip2IfConfAugEntry ::= SEQUENCE { alaRip2IfConfEncryptKey AlaAuthenticationEncryptKey, alaRip2IfIpConfStatus INTEGER, alaRip2IfRecvPkts Integer32, alaRip2IfConfName SnmpAdminString, alaRip2IfConfType INTEGER, alaRip2IfConfPtoPPeer IpAddress, alaRip2IfConfIngressFilterRouteMapName SnmpAdminString, alaRip2IfConfEgressFilterRouteMapName SnmpAdminString } alaRip2IfConfEncryptKey OBJECT-TYPE SYNTAX AlaAuthenticationEncryptKey MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication encryption key that is used to decypher RIP passwords." ::= { alaRip2IfConfAugEntry 1 } alaRip2IfIpConfStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the associated IP interface" ::= { alaRip2IfConfAugEntry 2 } alaRip2IfRecvPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received on this interface" ::= { alaRip2IfConfAugEntry 3 } alaRip2IfConfName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The user defined name used to identify the IP interface" ::= { alaRip2IfConfAugEntry 4 } alaRip2IfConfType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), point2point(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the rip interface" ::= { alaRip2IfConfAugEntry 5 } alaRip2IfConfPtoPPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the peer for a point-to-point rip interface" ::= { alaRip2IfConfAugEntry 6 } alaRip2IfConfIngressFilterRouteMapName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of a Route Map to be applied when filtering RIP routing updates received on this RIP interface. RIP routes that are explicitly denied by a Route Map are filtered. An empty string indicates that no filtering action is performed (this is the default). If the Route Map is specified and a RIP route doesn't match any Route Map route or if there is a match that is permitted, the RIP route is not filtered. Route Map manipulators (SET commands configured for a Route Map) are not applied when filtering is performed. (cf. alaRouteMapNameTable.AlaRouteMapNameEntry.alaRouteMapName)" DEFVAL { ''H } -- the empty string ::= { alaRip2IfConfAugEntry 7 } alaRip2IfConfEgressFilterRouteMapName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of a Route Map to be applied when filtering RIP routing updates sent out this RIP interface. RIP routes that are explicitly denied by a Route Map are filtered. An empty string indicates that no filtering action is performed (this is the default). If the Route Map is specified and a RIP route doesn't match any Route Map route or if there is a match that is permitted, the RIP route is not filtered. Route Map manipulators (SET commands configured for a Route Map) are not applied when filtering is performed. (cf. alaRouteMapNameTable.AlaRouteMapNameEntry.alaRouteMapName)" DEFVAL { ''H } -- the empty string ::= { alaRip2IfConfAugEntry 8 } -- ************************************************************************ -- ************************************************************************ alaRipEcmpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRipEcmpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ECMP-enabled RIP routing table which contains the network routes." ::= { alaProtocolRip 12 } alaRipEcmpRouteEntry OBJECT-TYPE SYNTAX AlaRipEcmpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ECMP-enabled RIP routing table which contains the network routes." INDEX { alaRipEcmpRouteDest, alaRipEcmpRouteMask, alaRipEcmpRouteNextHop } ::= { alaRipEcmpRouteTable 1 } AlaRipEcmpRouteEntry ::= SEQUENCE { alaRipEcmpRouteDest IpAddress, alaRipEcmpRouteMask IpAddress, alaRipEcmpRouteNextHop IpAddress, alaRipEcmpRouteType INTEGER, alaRipEcmpRouteAge TimeTicks, alaRipEcmpRouteTag Integer32, alaRipEcmpRouteMetric Integer32, alaRipEcmpRouteStatus RowStatus, alaRipEcmpRouteState INTEGER } alaRipEcmpRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route." ::= { alaRipEcmpRouteEntry 1 } alaRipEcmpRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask for this route." ::= { alaRipEcmpRouteEntry 2 } alaRipEcmpRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next hop to reach this route." ::= { alaRipEcmpRouteEntry 3 } alaRipEcmpRouteType OBJECT-TYPE SYNTAX INTEGER { local (1), -- local route remote (2), -- remote route redistribute (3) -- redistributed route } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of route." ::= { alaRipEcmpRouteEntry 4 } alaRipEcmpRouteAge OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct." ::= { alaRipEcmpRouteEntry 5 } alaRipEcmpRouteTag OBJECT-TYPE SYNTAX Integer32 ( 0 .. 2147483647 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated route tag." DEFVAL { 0 } ::= { alaRipEcmpRouteEntry 6 } alaRipEcmpRouteMetric OBJECT-TYPE SYNTAX Integer32 ( 0 .. 15 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric for this route." ::= { alaRipEcmpRouteEntry 7 } alaRipEcmpRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { alaRipEcmpRouteEntry 8 } alaRipEcmpRouteState OBJECT-TYPE SYNTAX INTEGER { active (1), garbage (2), holddown (3), unknown (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The associated state for this route." ::= { alaRipEcmpRouteEntry 9 } -- ************************************************************************ -- ************************************************************************ -- -- Compliance Statements -- alcatelIND1RIPMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Routing Information Protocol (RIP) Subsystem." MODULE -- this module MANDATORY-GROUPS { alaRipMiscellaneousGroup, alaRipEcmpRouteGroup } ::= { alcatelIND1RIPMIBCompliances 1 } -- -- Units of Conformance -- alaRipMiscellaneousGroup OBJECT-GROUP OBJECTS { alaRipRedistRouteTag, alaRipForceHolddownTimer, alaRipRouteNumber } STATUS current DESCRIPTION "Collection of Miscellaneous objects for management of RIP." ::= { alcatelIND1RIPMIBGroups 1 } alaRip2IfConfAugGroup OBJECT-GROUP OBJECTS { alaRip2IfConfEncryptKey , alaRip2IfIpConfStatus , alaRip2IfRecvPkts , alaRip2IfConfName , alaRip2IfConfType , alaRip2IfConfPtoPPeer , alaRip2IfConfIngressFilterRouteMapName , alaRip2IfConfEgressFilterRouteMapName } STATUS current DESCRIPTION "Collection of RIP2 Interface objects." ::= { alcatelIND1RIPMIBGroups 2 } alaProtocolRipGroup OBJECT-GROUP OBJECTS { alaRipProtoStatus , alaRipHostRouteSupport , alaRipRedistRouteTag , alaRipForceHolddownTimer , alaRipRouteNumber , alaRipUpdateInterval , alaRipInvalidTimer , alaRipHolddownTimer , alaRipGarbageTimer } STATUS current DESCRIPTION "Collection of RIP Protocol objects." ::= { alcatelIND1RIPMIBGroups 3 } alaRipEcmpRouteGroup OBJECT-GROUP OBJECTS { alaRipRouteNumber, alaRipEcmpRouteType, alaRipEcmpRouteAge, alaRipEcmpRouteTag, alaRipEcmpRouteMetric, alaRipEcmpRouteStatus, alaRipEcmpRouteState } STATUS current DESCRIPTION "Collection of objects for management of Network Route configuration." ::= { alcatelIND1RIPMIBGroups 6 } -- -- Trap definitions -- alcatelIND1RIPTraps OBJECT IDENTIFIER ::= { alcatelIND1RIPMIB 3} alcatelIND1RIPTrapsRoot OBJECT IDENTIFIER ::= { alcatelIND1RIPTraps 0} ripRouteMaxLimitReached NOTIFICATION-TYPE STATUS current DESCRIPTION " This notification is generated as RIP database reached supported Maximum entries. RIP will discard any new updates." ::= {alcatelIND1RIPTrapsRoot 1} alcatelIND1RIPTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { ripRouteMaxLimitReached } STATUS current DESCRIPTION "Collection of RIP Trap Objects." ::= { alcatelIND1RIPMIBGroups 7 } END