ALCATEL-IND1-SERVICE-MGR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, Unsigned32, TimeTicks, Counter64, IpAddress FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF softentIND1serviceMgr FROM ALCATEL-IND1-BASE RowStatus, TEXTUAL-CONVENTION, DisplayString, TruthValue, MacAddress, TimeStamp, DateAndTime FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB AlaEServiceUNIProfileProtocolTreatment FROM ALCATEL-IND1-E-SERVICE-MIB svcId, SdpId, ServObjDesc FROM ALCATEL-IND1-TIMETRA-SERV-MIB sapPortId, sapEncapValue FROM ALCATEL-IND1-TIMETRA-SAP-MIB sdpBindId FROM ALCATEL-IND1-TIMETRA-SDP-MIB TmnxPortID, TmnxEncapVal, TmnxServId, TmnxVcIdOrNone, SdpBindId, ServiceAdminStatus, ServiceAdminStatus, ServiceOperStatus, TmnxServId, TmnxCustId, SdpBindId, TmnxVRtrID FROM ALCATEL-IND1-TIMETRA-TC-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB MplsLdpIdentifier FROM MPLS-LDP-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB ; alcatelIND1ServiceMgrMIB MODULE-IDENTITY LAST-UPDATED "201208090000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "The parameters for configuration of the service manager feature. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" ::= { softentIND1serviceMgr 1} -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Textual Conventions -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx AluLocation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The data type AluLocation represents the type of the local 'interface': - 'sap(1)': sap interface - 'sdp(2)': mesh-sdp or spoke-sdp interface." SYNTAX INTEGER { sap(1), sdp(2) } AluServiceId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A 16-bit number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID. The value from 1 to 32767 is for static range. The value from 32768 to 65534 is for dynamic range. The value 65535 is for all configured IDs." SYNTAX Unsigned32 (0|1..32767|32768..65534|65535) AluSdpId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A 16-bit number used to identify a Service Distribution Point. This ID must be unique only within the node where it is defined. The value 0 is used as the null ID. The value from 1 to 32767 is for static range. The value from 32768 to 65534 is for dynamic range. The value 65535 is for all configured IDs." SYNTAX Unsigned32 (0|1..32767|32768..65534|65535) AluServiceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is used to specify the type of a given service." SYNTAX INTEGER { unknown (0), -- Unknown service type epipe (1), -- Ethernet pipe p3pipe (2), -- POS pipe tls (3), -- Virtual private LAN service "VPLS" vprn (4), -- Virtual private routed network ies (5), -- Internet enhanced service mirror (6), -- Mirror service apipe (7), -- ATM pipe service fpipe (8), -- FR pipe service ipipe (9), -- IP interworking pipe service cpipe (10),-- Circuit Emulation pipe service spb (11),-- Shortest Path Bridging Mac service "SPBM" vxlan (12),-- Virtual Extensible LAN service "VxLAN" local (13), -- Local service for traffic between SAPs but no tunnel rfpoverspb (14) -- RFP over SPB } AluAllocationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Resource Allocation Type: Static (Manual) or Dynamic (Automatic)." SYNTAX INTEGER { static(1), dynamic(2) } AluSdpDynamicType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "SDP Type: Unicast or Multicast" SYNTAX INTEGER { unknown (0), -- Invalid static (1), -- Manually configured sdp dynamicUnicast (2), -- Dynamically created unicast path "*" dynamicMcastRemote (3), -- Dynamically created multicast path from remote node "+" dynamicMcastLocal (4) -- Dynamically created multicast path from local node "#" } AluSdpOriginType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "SDP Creation Origin" SYNTAX INTEGER { unknown (0), -- Invalid static (1), -- Manually configured sdp "VPLS" pbbDynamicUnicast (2), -- Dynamically created unicast path "*" for PBB Tunnel pbbDynamicMcastRemote (3), -- Dynamically created multicast path from remote node "+" for PBB Tunnel pbbDynamicMcastLocal (4), -- Dynamically created multicast path from local node "#" for PBB Tunnel vxlanUnicast (5), -- Far-end Unicast Ip Addr for VxLAN Tunnel vxlanMcast (6), -- Multicast Group for VxLAN Tunnel vxlanDynamicUnicast (7), -- Dynamically created Far-end Unicast for VxLAN Tunnel vxlanDynamicMcast (8) -- Dynamically created Multicast group for VxLAN Tunnel } AluDateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "ASCII string used to display date and time in MM/DD/YYYY HH:MM:SS format" SYNTAX OCTET STRING (SIZE (0..21)) -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1ServiceMgrMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Service Manager Managed Objects." ::= { alcatelIND1ServiceMgrMIB 1 } alcatelIND1ServiceMgrMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Service Manager Conformance Information." ::= { alcatelIND1ServiceMgrMIB 2 } alcatelIND1ServiceMgrMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Service Manager Units Of Conformance." ::= { alcatelIND1ServiceMgrMIBConformance 1 } alcatelIND1ServiceMgrMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Service Manager Compliance Statements." ::= { alcatelIND1ServiceMgrMIBConformance 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Service Manager Trap Group alaServiceMgrNotifications OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 0 } -- The Service Manager Group alaServiceMgr OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- The Service Manager Port Profile Table -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaServiceMgrPortProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaServiceMgrPortProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains service profiles containing performance and control attributes. An entry in this table is created when a new service profile is defined." ::= { alaServiceMgr 1 } alaServiceMgrPortProfileEntry OBJECT-TYPE SYNTAX AlaServiceMgrPortProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Service Manager Port Profile entry." INDEX { alaServiceMgrPortProfileID } ::= { alaServiceMgrPortProfileTable 1 } AlaServiceMgrPortProfileEntry ::= SEQUENCE { alaServiceMgrPortProfileID DisplayString, alaServiceMgrPortProfileStpBpduTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfile8021xTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfile8021ABTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfile8023adTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfileGvrpTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfileAmapTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfileRowStatus RowStatus, alaServiceMgrPortProfileMvrpTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfileCiscoPduTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfileCiscoVlanTreatment AlaEServiceUNIProfileProtocolTreatment, alaServiceMgrPortProfileCiscoUplinkTreatment AlaEServiceUNIProfileProtocolTreatment } alaServiceMgrPortProfileID OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A label given to uniquely identify this port profile. Must be at least one character long." ::= { alaServiceMgrPortProfileEntry 1 } alaServiceMgrPortProfileStpBpduTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the spanning tree protocol BPDU received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently Peer is not supported for Spanning Tree" DEFVAL { tunnel } ::= { alaServiceMgrPortProfileEntry 2 } alaServiceMgrPortProfile8021xTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol." DEFVAL { drop } ::= { alaServiceMgrPortProfileEntry 3 } alaServiceMgrPortProfile8021ABTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol." DEFVAL { drop } ::= { alaServiceMgrPortProfileEntry 4 } alaServiceMgrPortProfile8023adTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU (LACP) frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently Peer is only configurable for LACP frames." DEFVAL { peer } ::= { alaServiceMgrPortProfileEntry 5 } alaServiceMgrPortProfileGvrpTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the GVRP PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently peer is not supported for GVRP" DEFVAL { tunnel } ::= { alaServiceMgrPortProfileEntry 6 } alaServiceMgrPortProfileAmapTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the Alcatel propietary AMAP PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol." DEFVAL { drop } ::= { alaServiceMgrPortProfileEntry 7 } alaServiceMgrPortProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { alaServiceMgrPortProfileEntry 8 } alaServiceMgrPortProfileMvrpTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the MVRP PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently peer is not supported for MVRP" DEFVAL { tunnel } ::= { alaServiceMgrPortProfileEntry 9 } alaServiceMgrPortProfileCiscoPduTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the Cisco PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently peer is not supported for Cisco PDU" DEFVAL { drop } ::= { alaServiceMgrPortProfileEntry 10 } alaServiceMgrPortProfileCiscoVlanTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the Cisco Vlan PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently peer is not supported for Cisco Vlan PDU" DEFVAL { drop } ::= { alaServiceMgrPortProfileEntry 11 } alaServiceMgrPortProfileCiscoUplinkTreatment OBJECT-TYPE SYNTAX AlaEServiceUNIProfileProtocolTreatment MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the behavior of the bridge in regards to the Cisco Uplink PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently peer is not supported for Cisco Uplink PDU" DEFVAL { drop } ::= { alaServiceMgrPortProfileEntry 12 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- The Service Manager Port Table -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaServiceMgrPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaServiceMgrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port table has an entry for each port." ::= { alaServiceMgr 2 } alaServiceMgrPortEntry OBJECT-TYPE SYNTAX AlaServiceMgrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Service Manager Port entry." INDEX { alaServiceMgrPortID } ::= { alaServiceMgrPortTable 1 } AlaServiceMgrPortEntry ::= SEQUENCE { alaServiceMgrPortID InterfaceIndex, alaServiceMgrPortMode INTEGER, alaServiceMgrPortEncapType INTEGER, -- deprecated alaServiceMgrPortPortProfileID DisplayString, alaServiceMgrPortRowStatus RowStatus, alaServiceMgrPortLinkStatus ServiceAdminStatus, alaServiceMgrPortSapType AluAllocationType, alaServiceMgrPortSapCount Counter32, alaServiceMgrPortVlanXlation ServiceAdminStatus, alaServiceMgrPortDescription ServObjDesc } alaServiceMgrPortID OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfIndex uniquely identify this port table." ::= { alaServiceMgrPortEntry 1 } alaServiceMgrPortMode OBJECT-TYPE SYNTAX INTEGER { undefined (0), access (1), network (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The alaServiceMgrPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. Once the port's operation mode has been configured for 'access' mode, multiple services may be configured on the port. An access port can be created manually by Service Manager, UNP or EVB." DEFVAL { network } ::= { alaServiceMgrPortEntry 2 } alaServiceMgrPortEncapType OBJECT-TYPE SYNTAX INTEGER { unknown (0), nullEncap (1), qEncap (2), mplsEncap (3), bcpNullEncap (4), bcpDot1qEncap (5), ipcpEncap (6), frEncap (7), pppAutoEncap (8), atmEncap (9), qinqEncap (10), wanMirrorEncap (11), ciscoHDLCEncap (12), cemEncap (13) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Currently not required -- SAP configuration specifies the types of frame (untagged, tagged or qinq) that can ingress/egress this port." DEFVAL { nullEncap } ::= { alaServiceMgrPortEntry 3 } alaServiceMgrPortPortProfileID OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This Layer2 Profile associated with this port." ::= { alaServiceMgrPortEntry 4 } alaServiceMgrPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { alaServiceMgrPortEntry 5 } alaServiceMgrPortLinkStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Link Status up/down which will affect all the SAPs configured on this port." DEFVAL { down } ::= { alaServiceMgrPortEntry 6 } alaServiceMgrPortSapType OBJECT-TYPE SYNTAX AluAllocationType MAX-ACCESS read-only STATUS current DESCRIPTION "Resource Allocation Type: Static (Manual) or Dynamic (Automatic)." DEFVAL { static } ::= { alaServiceMgrPortEntry 7 } alaServiceMgrPortSapCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAPs configured on this port." ::= { alaServiceMgrPortEntry 8 } alaServiceMgrPortVlanXlation OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To enable/disable the vlan translation for all the SAPs configured on this port." DEFVAL { down } ::= { alaServiceMgrPortEntry 9 } alaServiceMgrPortDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "Generic information about this port." DEFVAL { "" } ::= { alaServiceMgrPortEntry 10 } -- --------------------------------------------------------------------- -- ***** OBSOLETE ***** -- SAP Extra Information Table -- -- This is an extension of the sapBaseInfoTable. -- -- Deletion of a row in the sapBaseInfoTable results in the -- same fate for the row in the alaSapExtraInfoTable. -- --------------------------------------------------------------------- alaSapExtraInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ASapExtraInfoEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains SAP information." ::= { alaServiceMgr 3 } alaSapExtraInfoEntry OBJECT-TYPE SYNTAX ASapExtraInfoEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information about a specific SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { alaSapExtraInfoTable 1 } ASapExtraInfoEntry ::= SEQUENCE { alaSapInfoTrusted INTEGER, alaSapInfoPriority Integer32 } alaSapInfoTrusted OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Indicates whether the SAP is trusted." DEFVAL { false } ::= { alaSapExtraInfoEntry 1 } alaSapInfoPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Priority for this SAP." DEFVAL { 0 } ::= { alaSapExtraInfoEntry 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- ALA Service Base Info Table -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaSvcBaseInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSvcBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic service information." ::= { alaServiceMgr 4 } alaSvcBaseInfoEntry OBJECT-TYPE SYNTAX AlaSvcBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic information about a specific service." INDEX { alaSvcId } ::= { alaSvcBaseInfoTable 1 } AlaSvcBaseInfoEntry ::= SEQUENCE { alaSvcId AluServiceId, alaSvcRowStatus RowStatus, alaSvcType AluServiceType, alaSvcDescription ServObjDesc, alaSvcMtu INTEGER, alaSvcAdminStatus ServiceAdminStatus, alaSvcOperStatus ServiceOperStatus, alaSvcNumSaps Integer32, alaSvcNumSdps Integer32, alaSvcLastMgmtChange AluDateAndTime, alaSvcLastStatusChange AluDateAndTime, alaSvcDefMeshVcId Unsigned32, alaSvcVFI INTEGER, alaSvcMcIndex INTEGER, alaSvcAllocationType AluAllocationType, alaSvcStatsAdminStatus ServiceAdminStatus, alaSvcRemoteFlushStatus ServiceAdminStatus, alaSvcIsid Integer32, alaSvcBVlan Integer32, alaSvcMulticastMode INTEGER, alaSvcIngressPacketCount Counter32, alaSvcIngressByteCount Counter64, alaSvcEgressPacketCount Counter32, alaSvcEgressByteCount Counter64, alaSvcClearCounters INTEGER, alaSvcSapVlanXlation ServiceAdminStatus, alaSvcVnid Integer32, -- VXLAN alaSvcRemoveIngressTag ServiceAdminStatus, alaSvcL3VpnIfIndex InterfaceIndexOrZero, -- L3-VPN alaSvcL3VpnIfName SnmpAdminString, -- L3-VPN alaSvcL3VpnVrfName SnmpAdminString, -- L3-VPN alaSvcL3VpnMtu Integer32 -- L3-VPN } alaSvcId OBJECT-TYPE SYNTAX AluServiceId MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object alaSvcId specifies the Service identifier. This value should be unique within the service domain." ::= { alaSvcBaseInfoEntry 1 } alaSvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This value of the object alaSvcRowStatus specifies the status of this row. To delete an entry from this table, the corresponding service must be administratively down, have no SAP's defined on it, and have no SDP bindings." ::= { alaSvcBaseInfoEntry 2 } alaSvcType OBJECT-TYPE SYNTAX AluServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object alaSvcType specifies the service type: e.g. vpls, spb, etc. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'." ::= { alaSvcBaseInfoEntry 3 } alaSvcDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object alaSvcDescription specifiers an optional, generic information about this service." DEFVAL { "" } ::= { alaSvcBaseInfoEntry 4 } alaSvcMtu OBJECT-TYPE SYNTAX INTEGER (0..9194) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object alaSvcMtu specifies the largest frame size (in octets) that this service can handle. The default value of this object depends on the service type: 1514 octets for epipe, p3pipe and tls, 1508 for apipe and fpipe, and 1500 octets for vprn, ipipe and ies, 1514 octets for cpipe." ::= { alaSvcBaseInfoEntry 5 } alaSvcAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object alaSvcAdminStatus specifies the desired state of this service." DEFVAL { down } ::= { alaSvcBaseInfoEntry 6 } alaSvcOperStatus OBJECT-TYPE SYNTAX ServiceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaSvcOperStatus indicates the operating state of this service. The requirements for a service to be operationally up depend on the service type: tls services are 'up' when the service is administratively up and either at least two SAP's or spoke SDP Bind's, or one SAP or spoke SDP Bind and at least one mesh SDP Bind are operationally up." ::= { alaSvcBaseInfoEntry 7 } alaSvcNumSaps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaSvcNumSaps indicates the number of SAPs defined on this service." ::= { alaSvcBaseInfoEntry 8 } alaSvcNumSdps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaSvcNumSdps indicates the number of SDPs bound to this service." ::= { alaSvcBaseInfoEntry 9 } alaSvcLastMgmtChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of of the object alaSvcLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this service." ::= { alaSvcBaseInfoEntry 10 } alaSvcLastStatusChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaSvcLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his service." ::= { alaSvcBaseInfoEntry 11 } alaSvcDefMeshVcId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object alaSvcDefMeshVcId specifies, only in services that accept mesh SDP bindings, the VC ID portion of the sdpBindId index of each mesh SDP binding defined in the service. The default value of this object is equal to the service ID." ::= { alaSvcBaseInfoEntry 12 } alaSvcVFI OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Forwarding Instance (VFI) allocated for a service on a LER or BEB switch. This service instance defines the forwarding plane for the data packets among virtual port members associated with the VFI. The VFI has one-to-one mapping relationship with the ServiceId for this service instance." ::= { alaSvcBaseInfoEntry 13 } alaSvcMcIndex OBJECT-TYPE SYNTAX INTEGER (3..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Multicast Index associated with a VFI which is used to setup the multicast replication logic for this service instance on the LER or BEB switch. The McIndex has one-to-one mapping relationship with the ServiceId for this service instance." ::= { alaSvcBaseInfoEntry 14 } alaSvcAllocationType OBJECT-TYPE SYNTAX AluAllocationType MAX-ACCESS read-only STATUS current DESCRIPTION "Resource Allocation Type: Static (Manual) or Dynamic (Automatic)." DEFVAL { static } ::= { alaSvcBaseInfoEntry 15 } alaSvcStatsAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To enable or disable ingress and egress statistics counters for packets flowing through the SAP or Sdp Bind objects for this service instance." DEFVAL { down } ::= { alaSvcBaseInfoEntry 16 } alaSvcRemoteFlushStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To enable or disable flushing C-Vlan MACs learned at the remote nodes." DEFVAL { down } ::= { alaSvcBaseInfoEntry 17 } alaSvcIsid OBJECT-TYPE SYNTAX Integer32 (256..16777214) MAX-ACCESS read-create STATUS current DESCRIPTION "The i-domain Service Indentifier (I-SID) which identifies the service instance in a PBB network on a BEB switch. For a customer packet flowing toward the b-domain, the I-SID is derived from the VFI and inserted into the packet. For a packet arrived from the b-domain, the I-SID is used to identify the VFI for the i-domain processing." ::= { alaSvcBaseInfoEntry 18 } alaSvcBVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The Backbone Vlan Id (BVlan) which defines the b-domain for the PBB traffic." ::= { alaSvcBaseInfoEntry 19 } alaSvcMulticastMode OBJECT-TYPE SYNTAX INTEGER { headend(1), tandem(2), hybrid (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "To configure the multicast replication mode for each service: Head-end(1) where a non-unicast packet entering the SAP port is replicated once for each receiver in the b-domain using its unicast BMAC. Tandem(2) where a non-unicast packet entering the SAP port is replicated once at each node using the multicast group address. Hybrid(3) combination of Head-end and Tandem replication." DEFVAL { headend } ::= { alaSvcBaseInfoEntry 20 } alaSvcIngressPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ingress packet count flowing through this service." ::= { alaSvcBaseInfoEntry 21 } alaSvcIngressByteCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ingress byte count flowing through this service." ::= { alaSvcBaseInfoEntry 22 } alaSvcEgressPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total egress packet count flowing through this service." ::= { alaSvcBaseInfoEntry 23 } alaSvcEgressByteCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total egress byte count flowing through this service." ::= { alaSvcBaseInfoEntry 24 } alaSvcClearCounters OBJECT-TYPE SYNTAX INTEGER { done (0), clear (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to clear (1), all ingress/egress stats counters of this service will be reset to 0. This object will be set to done (0) when all counters are cleared." DEFVAL { done } ::= { alaSvcBaseInfoEntry 25 } alaSvcSapVlanXlation OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To enable/disable the vlan translation for all the SAPs configured in this service if the corresponding access ports for the SAPs also has the vlan translation enabled." DEFVAL { down } ::= { alaSvcBaseInfoEntry 26 } alaSvcVnid OBJECT-TYPE SYNTAX Integer32 (-1 | 1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The virtual network identifier (VNID). A 24-bit value used to designate the individual VXLAN overlay network on which the communicating VMs are situated. VMs in different VXLAN overlay networks cannot communicate with each other. Value 0 and 0xfffffff are currently reserved. Value -1 indicates all VNIDs currently configured." ::= { alaSvcBaseInfoEntry 27 } alaSvcRemoveIngressTag OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To enable/disable the removal of the tag from the ingress pkts matching all SAPs configured in this service" DEFVAL { down } ::= { alaSvcBaseInfoEntry 28 } alaSvcL3VpnIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index of the L3-VPN IP interface associated with this service. Value 0 indicates no L3-VPN interface is associated with this service." DEFVAL { 0 } ::= { alaSvcBaseInfoEntry 29 } alaSvcL3VpnIfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name of the L3-VPN IP interface associated with this service" ::= { alaSvcBaseInfoEntry 30 } alaSvcL3VpnVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current VRF instance name for the L3-VPN interface associated with this service. The default VRF is assumed if not specifed." ::= { alaSvcBaseInfoEntry 31 } alaSvcL3VpnMtu OBJECT-TYPE SYNTAX Integer32 (0 | 1280..9198) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum packet size of a IP control packet that can be handled by the CPU for this service. Value 0 indicates the default mtu." DEFVAL { 1500 } ::= { alaSvcBaseInfoEntry 32 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- ALA Service Access Point (SAP) Base Info Table -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaSapBaseInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSapBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic SAP information." ::= { alaServiceMgr 5 } alaSapBaseInfoEntry OBJECT-TYPE SYNTAX AlaSapBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific SAP." INDEX { alaSvcId, alaSapPortId, alaSapEncapValue } ::= { alaSapBaseInfoTable 1 } AlaSapBaseInfoEntry ::= SEQUENCE { alaSapPortId InterfaceIndex, alaSapEncapValue TmnxEncapVal, alaSapRowStatus RowStatus, alaSapType AluServiceType, alaSapDescription ServObjDesc, alaSapAdminStatus ServiceAdminStatus, alaSapOperStatus INTEGER, alaSapLastMgmtChange AluDateAndTime, alaSapLastStatusChange AluDateAndTime, alaSapOperFlags BITS, alaSapTrusted TruthValue, alaSapPriority INTEGER, alaSapSvcId AluServiceId, alaSapSvcVFI INTEGER, alaSapVirtualPort INTEGER, alaSapAllocationType AluAllocationType, alaSapStatsAdminStatus ServiceAdminStatus, alaSapIngressPacketCount Counter32, alaSapIngressByteCount Counter64, alaSapEgressPacketCount Counter32, alaSapEgressByteCount Counter64, alaSapClearCounters INTEGER } alaSapPortId OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ID of the access port where this SAP is defined." ::= { alaSapBaseInfoEntry 1 } alaSapEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the label used to identify this SAP on the access port specified by sapPortId." ::= { alaSapBaseInfoEntry 2 } alaSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'." ::= { alaSapBaseInfoEntry 3 } alaSapType OBJECT-TYPE SYNTAX AluServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of service where this SAP is defined." ::= { alaSapBaseInfoEntry 4 } alaSapDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "Generic information about this SAP." DEFVAL { "" } ::= { alaSapBaseInfoEntry 5 } alaSapAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of this SAP." DEFVAL { down } ::= { alaSapBaseInfoEntry 6 } alaSapOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), ingressQosMismatch (3), egressQosMismatch (4), portMtuTooSmall (5), svcAdminDown (6), iesIfAdminDown (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapOperStatus indicates the operating state of this SAP." ::= { alaSapBaseInfoEntry 7 } alaSapLastMgmtChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent management-initiated change to this SAP." ::= { alaSapBaseInfoEntry 8 } alaSapLastStatusChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent operating status change to this SAP." ::= { alaSapBaseInfoEntry 9 } alaSapOperFlags OBJECT-TYPE SYNTAX BITS { sapAdminDown (0), -- SAP is admin down svcAdminDown (1), -- Service is admin down iesIfAdminDown (2), -- IP interface is admin down -- (IES and VPRN only) portOperDown (3), -- Access port is oper down portMtuTooSmall (4), -- Access port's MTU is less -- than Service MTU l2OperDown (5), -- L2 PVC/PVP is oper down -- (FR and ATM only) ingressQosMismatch (6), -- Mismatch between ingress -- QoS and Scheduler policies egressQosMismatch (7), -- Mismatch between egress -- QoS and Scheduler policies relearnLimitExceeded (8), -- MAC relearn limit was -- exceeded (TLS only) recProtSrcMac (9), -- Received a packet with a -- protected source MAC -- (TLS only) subIfAdminDown (10), -- Subscriber interface is -- admin down (group-interface -- SAP only) sapIpipeNoCeIpAddr (11), -- CE IP Address not -- configured for Ipipe SAP -- (IPIPE SAP only) sapTodResourceUnavail (12),-- SAP with ToD had -- insufficient resources -- at boot time and got -- default policies. sapTodMssResourceUnavail (13), -- MSS of this SAP uses -- ToD and due to -- insufficient resources -- at boot time got -- default scheduler -- policies. sapParamMismatch (14), -- Service specific local -- parameter mismatch sapCemNoEcidOrMacAddr (15), -- ECID or MAC address not -- configured (CEM SAP -- only) sapStandbyForMcRing (16), -- mc-ring keeps this SAP -- standby for the -- corresponding SAP on -- peer sapSvcMtuTooSmall (17), -- Service MTU is less -- than the SAP payload ingressNamedPoolMismatch (18), -- Invalid named-pool -- on the ingress side egressNamedPoolMismatch (19), -- Invalid named-pool -- on the egress side ipMirrorNoMacAddr (20), -- No MAC Address configured -- for the ip-mirror sapEpipeNoRingNode (21) -- No TIMETRA-MC-REDUNDANCY-MIB -- ::tmnxMcEpipeSapEntry object -- configured for Epipe SAP -- (EPIPE SAP only) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies all the conditions that affect the operating status of this SAP." ::= { alaSapBaseInfoEntry 10 } alaSapTrusted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the SAP is trusted." DEFVAL { true } ::= { alaSapBaseInfoEntry 11 } alaSapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Priority of this SAP." DEFVAL { 0 } ::= { alaSapBaseInfoEntry 12 } alaSapSvcId OBJECT-TYPE SYNTAX AluServiceId MAX-ACCESS read-only STATUS current DESCRIPTION "The Service Id where this SAP is attached to." ::= { alaSapBaseInfoEntry 13 } alaSapSvcVFI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The Service Virtual Forwarding Instance which defines the broadcast domain among SAPs and Sdp-Binds of this instance." ::= { alaSapBaseInfoEntry 14 } alaSapVirtualPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The logical representation of a SAP associated with a service instance where customer packets ingress and egress." ::= { alaSapBaseInfoEntry 15 } alaSapAllocationType OBJECT-TYPE SYNTAX AluAllocationType MAX-ACCESS read-only STATUS current DESCRIPTION "Resource Allocation Type: Static (Manual CLI) or Dynamic (through requests from UNP or EVB)." ::= { alaSapBaseInfoEntry 16 } alaSapStatsAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To enable/disable the ingress/egress stats counters on this SAP." ::= { alaSapBaseInfoEntry 17 } alaSapIngressPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ingress packet count flowing through this SAP." ::= { alaSapBaseInfoEntry 18 } alaSapIngressByteCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ingress byte count flowing through this SAP." ::= { alaSapBaseInfoEntry 19 } alaSapEgressPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total egress packet count flowing through this SAP." ::= { alaSapBaseInfoEntry 20 } alaSapEgressByteCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total egress byte count flowing through this SAP." ::= { alaSapBaseInfoEntry 21 } alaSapClearCounters OBJECT-TYPE SYNTAX INTEGER { done (0), clear (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to clear (1), all ingress/egress stats counters of this sap will be reset to 0. This object will be set to done (0) when all counters are cleared." DEFVAL { done } ::= { alaSapBaseInfoEntry 22 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- ALA Service Distribution Point (SDP) Base Info Table -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaSdpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSdpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SDP information." ::= { alaServiceMgr 6 } alaSdpInfoEntry OBJECT-TYPE SYNTAX AlaSdpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific SDP." INDEX { alaSdpId } ::= { alaSdpInfoTable 1 } AlaSdpInfoEntry ::= SEQUENCE { alaSdpId AluSdpId, alaSdpRowStatus RowStatus, alaSdpSvcType AluServiceType, alaSdpDelivery INTEGER, alaSdpFarEndIpAddress IpAddress, alaSdpDescription ServObjDesc, alaSdpLabelSignaling INTEGER, alaSdpAdminStatus ServiceAdminStatus, alaSdpOperStatus INTEGER, alaSdpAdminPathMtu INTEGER, alaSdpOperPathMtu Integer32, alaSdpLastMgmtChange AluDateAndTime, alaSdpLdpEnabled TruthValue, alaSdpVlanVcEtype Unsigned32, alaSdpAdvertisedVllMtuOverride TruthValue, alaSdpOperFlags BITS, alaSdpLastStatusChange AluDateAndTime, alaSdpNetworkPort InterfaceIndexOrZero, alaSdpBVlan INTEGER, alaSdpSystemId MacAddress, alaSdpSystemName DisplayString, alaSdpSpSourceId Unsigned32, alaSdpAllocationType AluAllocationType, alaSdpDynamicType AluSdpDynamicType, alaSdpBindCount INTEGER, alaSdpIsid INTEGER, alaSdpMcastPortList DisplayString, alaSdpCreationOrigin AluSdpOriginType, alaSdpAdminTTL OCTET STRING } alaSdpId OBJECT-TYPE SYNTAX AluSdpId MAX-ACCESS not-accessible STATUS current DESCRIPTION "SDP identifier." ::= { alaSdpInfoEntry 1 } alaSdpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, the corresponding SDP must be administratively down, not bound to any service, and not in use as a mirror destination." ::= { alaSdpInfoEntry 2 } alaSdpSvcType OBJECT-TYPE SYNTAX AluServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of service where this SDP is defined." ::= { alaSdpInfoEntry 3 } alaSdpDelivery OBJECT-TYPE SYNTAX INTEGER { gre (1), mpls (2), pbb (3), vxlan (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of delivery used by this SDP: e.g. GRE or MPLS. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'." ::= { alaSdpInfoEntry 4 } alaSdpFarEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address of the remote end of the MPLS or VxLAN tunnel defined by this SDP. For SPB, this object is not used. For VxLAN, the value of this object must be set for the row to become 'active', and can only be changed while the admin status of the SDP is 'down'. The value can be a unicast IP address of a single far-end node, or a multicast group address for multiple member nodes." ::= { alaSdpInfoEntry 5 } alaSdpDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "Generic information about this SDP." DEFVAL { "" } ::= { alaSdpInfoEntry 6 } alaSdpLabelSignaling OBJECT-TYPE SYNTAX INTEGER { none (1), tldp (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP. When the value of this object is 'none' then the labels are manually assigned at the time the SDP is bound to a service. The value of this object can only be changed while the admin status of the SDP is 'down'." DEFVAL { tldp } ::= { alaSdpInfoEntry 7 } alaSdpAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of this SDP." DEFVAL { down } ::= { alaSdpInfoEntry 8 } alaSdpOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), notAlive (2), notReady (3), invalidEgressInterface (4), transportTunnelDown (5), down (6), created (7), -- dynamically created for SPB destroyed (8) -- dynamically destroyed for SPB } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating state of this SDP. The value 'notAlive' is valid only when keep-alive is enabled, and it means that the keep-alive operating status is not alive. The value 'notReady' is valid only when this SDP uses a label signaling protocol (e.g. TLDP) and it means that the signaling session with the far-end peer has not been established. The value 'invalidEgressInterface' indicates that the IOM's have detected that the egress interface towards the far-end device is not a network port." ::= { alaSdpInfoEntry 9 } alaSdpAdminPathMtu OBJECT-TYPE SYNTAX INTEGER (0|576..9194) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates that the path MTU should be computed dynamically from the corresponding MTU of the tunnel." DEFVAL { 0 } ::= { alaSdpInfoEntry 10 } alaSdpOperPathMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. In order to be able to bind this SDP to a given service, the value of this object must be equal to or larger than the MTU of the service, as defined by its svcMtu." ::= { alaSdpInfoEntry 11 } alaSdpLastMgmtChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent management-initiated change to this SDP." ::= { alaSdpInfoEntry 12 } alaSdpLdpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the transport LSP's are signalled by LDP, as opposed to being provisioned static or RSVP-signalled LSP's. This object applies only to MPLS SDP's." DEFVAL { false } ::= { alaSdpInfoEntry 13 } alaSdpVlanVcEtype OBJECT-TYPE SYNTAX Unsigned32 ('600'H..'ffff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ethertype used in frames sent out this SDP, when the VC type is vlan." DEFVAL { '8100'H } ::= { alaSdpInfoEntry 14 } alaSdpAdvertisedVllMtuOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is backward compatible with pre-2.0 software." DEFVAL { false } ::= { alaSdpInfoEntry 15 } alaSdpOperFlags OBJECT-TYPE SYNTAX BITS { sdpAdminDown (0), signalingSessionDown (1), transportTunnelDown (2), keepaliveFailure (3), invalidEgressInterface (4), noSystemIpAddress (5), transportTunnelUnstable (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies all the conditions that affect the operating status of this SDP." ::= { alaSdpInfoEntry 16 } alaSdpLastStatusChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent operating status change to this SDP." ::= { alaSdpInfoEntry 17 } alaSdpNetworkPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the network port where isis discovered the neighbor node information (BVlan and BMac)." DEFVAL { 0 } ::= { alaSdpInfoEntry 18 } alaSdpBVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The Backbone Vlan Id (BVlan) where isis has discovered the neighbor node information (BVlan and BMac)." ::= { alaSdpInfoEntry 19 } alaSdpSystemId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Backbone MAC (B-MAC) where isis has discovered the neighbor node information (BVlan and BMac)." ::= { alaSdpInfoEntry 20 } alaSdpSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The neighbor host name associated with the SDP object." ::= { alaSdpInfoEntry 21 } alaSdpSpSourceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The neighbor Shortest Path Source Id (the LSB 20-bit of SystemId." ::= { alaSdpInfoEntry 22 } alaSdpAllocationType OBJECT-TYPE SYNTAX AluAllocationType MAX-ACCESS read-only STATUS current DESCRIPTION "Allocation Type: Static (Manual) or Dynamic (Automatic)." DEFVAL { static } ::= { alaSdpInfoEntry 23 } alaSdpDynamicType OBJECT-TYPE SYNTAX AluSdpDynamicType MAX-ACCESS read-only STATUS current DESCRIPTION "SDP type allocated for Unicast or Multicast Path according to the tunnel type." DEFVAL { static } ::= { alaSdpInfoEntry 24 } alaSdpBindCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bind-SDPs bound to this SDP." ::= { alaSdpInfoEntry 25 } alaSdpIsid OBJECT-TYPE SYNTAX INTEGER (256..16777214) MAX-ACCESS read-only STATUS current DESCRIPTION "The i-domain Service Indentifier (I-SID) for the Group Mac assigned to this Multicast SDP." ::= { alaSdpInfoEntry 26 } alaSdpMcastPortList OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "List of egress ports for this Multicast SDP." ::= { alaSdpInfoEntry 27 } -- VxLAN alaSdpCreationOrigin OBJECT-TYPE SYNTAX AluSdpOriginType MAX-ACCESS read-create STATUS current DESCRIPTION "SDP creation origin staticly or dynamically for the tunnel types (MPLS, PBB, VxLAN...)" ::= { alaSdpInfoEntry 28 } alaSdpAdminTTL OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of hops an IP packet travels through the VxLAN tunnel before being discarded. This value is inserted into the TTL field of the IP header in the VXLAN encapsulated header originating from this node." DEFVAL { "@" } ::= { alaSdpInfoEntry 29 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- ALA Service Distribution Point Bind (SDP-Bind) Base Info Table -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SDP binding information." ::= { alaServiceMgr 7 } alaSdpBindEntry OBJECT-TYPE SYNTAX AlaSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific SDP binding." INDEX { alaSvcId, alaSdpBindId } ::= { alaSdpBindTable 1 } AlaSdpBindEntry ::= SEQUENCE { alaSdpBindId SdpBindId, alaSdpBindRowStatus RowStatus, alaSdpBindSvcType AluServiceType, alaSdpBindAdminIngressLabel Unsigned32, alaSdpBindAdminEgressLabel Unsigned32, alaSdpBindOperIngressLabel Unsigned32, alaSdpBindOperEgressLabel Unsigned32, alaSdpBindAdminStatus ServiceAdminStatus, alaSdpBindOperStatus INTEGER, alaSdpBindLastMgmtChange AluDateAndTime, alaSdpBindType INTEGER, alaSdpBindOperFlags BITS, alaSdpBindLastStatusChange AluDateAndTime, alaSdpBindControlWordBit TruthValue, alaSdpBindOperControlWord TruthValue, alaSdpBindNetworkPort InterfaceIndexOrZero, alaSdpBindVirtualPort INTEGER, alaSdpBindIsid INTEGER, alaSdpBindBVlan INTEGER, alaSdpBindSystemId MacAddress, alaSdpBindSystemName DisplayString, alaSdpBindAllocationType AluAllocationType, alaSdpBindIngressPacketCount Counter32, alaSdpBindIngressByteCount Counter64, alaSdpBindEgressPacketCount Counter32, alaSdpBindEgressByteCount Counter64, -- VxLAN alaSdpBindCreationOrigin AluSdpOriginType, alaSdpBindFarEndIpAddress IpAddress, alaSdpBindVnid Integer32, alaSdpBindDescription ServObjDesc, alaSdpBindStatsAdminStatus ServiceAdminStatus } alaSdpBindId OBJECT-TYPE SYNTAX SdpBindId MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "SDP Binding identifier." ::= { alaSdpBindEntry 1 } alaSdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'." ::= { alaSdpBindEntry 2 } alaSdpBindSvcType OBJECT-TYPE SYNTAX AluServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of service where this Sdp Bind is defined." ::= { alaSdpBindEntry 3 } alaSdpBindAdminIngressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 1 | 2048..18431) MAX-ACCESS read-create STATUS current DESCRIPTION "The static MPLS VC label used by the far-end device to send packets to this device in this service via this SDP. The value of alaSdpBindAdminIngressLabel is 1 when it is used by a mirror service. All mirror SDPs use this label to avoid the unnecessary use of additional labels." DEFVAL { 0 } ::= { alaSdpBindEntry 4 } alaSdpBindAdminEgressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The static MPLS VC label used by this device to send packets to the far-end device in this service via this SDP." DEFVAL { 0 } ::= { alaSdpBindEntry 5 } alaSdpBindOperIngressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "The MPLS label used by the far-end device to send packets to this device in this service via this SDP. This label is either alaSdpBindAdminIngressLabel, if not null, or the one obtained via the SDP's signaling protocol." DEFVAL { 0 } ::= { alaSdpBindEntry 6 } alaSdpBindOperEgressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "The MPLS label used by this device to send packets to the far-end device in this service via this SDP. This label is either alaSdpBindAdminEgressLabel, if not null, or the one obtained via the SDP's signaling protocol." DEFVAL { 0 } ::= { alaSdpBindEntry 7 } alaSdpBindAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of this Service-SDP binding." DEFVAL { up } ::= { alaSdpBindEntry 8 } alaSdpBindOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), noEgressLabel (2), noIngressLabel (3), noLabels (4), down (5), svcMtuMismatch (6), sdpPathMtuTooSmall (7), sdpNotReady (8), sdpDown (9), sapDown (10), created (11), -- dynamically created for SPB destroyed (12) -- dynamically destroyed for SPB } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of alaSdpBindOperStatus indicates the operating status of this Service-SDP binding. 'up' The Service-SDP binding is operational. 'noEgressLabel' The ingress label is available but the egress one is missing. 'noIngressLabel' The egress label is available but the ingress one is not. 'noLabels' Both the ingress and the egress labels are missing. 'down' The binding is administratively down. 'svcMtuMismatch' Both labels are available, but a service MTU mismatch was detected between the local and the far-end devices. 'sdpPathMtuTooSmall' The operating path MTU of the corresponding SDP is smaller than the service MTU. 'sdpNotReady' The SDP's signaling session is down. 'sdpDown' The SDP is not operationally up. 'sapDown' The SAP associated with the service is down." ::= { alaSdpBindEntry 9 } alaSdpBindLastMgmtChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent management-initiated change to this Service-SDP binding." ::= { alaSdpBindEntry 10 } alaSdpBindType OBJECT-TYPE SYNTAX INTEGER { spoke (1), mesh (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether this Service SDP binding is a spoke or a mesh. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'." DEFVAL { mesh } ::= { alaSdpBindEntry 11 } alaSdpBindOperFlags OBJECT-TYPE SYNTAX BITS { sdpBindAdminDown (0), -- SDP Bind is admin down svcAdminDown (1), -- Service is admin down sapOperDown (2), -- SAP is oper down (VLL's only) sdpOperDown (3), -- SDP is oper down sdpPathMtuTooSmall (4), -- SDP's path MTU is less than Service MTU noIngressVcLabel (5), -- No ingress VC label noEgressVcLabel (6), -- No egress VC label svcMtuMismatch (7), -- Service MTU mismatch with the remote PE vcTypeMismatch (8), -- VC type mismatch with the remote PE relearnLimitExceeded (9), -- MAC relearn limit was exceeded (TLS only) iesIfAdminDown (10),-- IP interface is admin down (IES and VPRN only) releasedIngressVcLabel (11),-- Peer released our ingress VC label labelsExhausted (12),-- Label Manager has ran out of labels svcParamMismatch (13),-- Service-specific parameter mismatch insufficientBandwidth (14),-- Insufficient bandwidth to allocate to SDP binding pwPeerFaultStatusBits (15),-- Received PW fault status bits from peer meshSdpDown (16) -- Mesh SDP Down } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies all the conditions that affect the operating status of this SDP Bind." ::= { alaSdpBindEntry 12 } alaSdpBindLastStatusChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaSdpBindLastStatusChange specifies the value of sysUpTime at the time of the most recent operating status change to this SDP Bind." ::= { alaSdpBindEntry 13 } alaSdpBindControlWordBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "alaSdpBindControlWordBit specifies whether the use of the 'ControlWord' is preferred or not. The value of alaSdpBindControlWordBit is exchanged with LDP peer during pseudowire negotiation time. The default value is determined by alaSdpBindVcType. alaSdpBindVcType of atmSdu and frDlci must have default value of 'true'. Other values of alaSdpBindVcType must have default value of 'false'." ::= { alaSdpBindEntry 14 } alaSdpBindOperControlWord OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "alaSdpBindOperControlWord indicates whether the 'ControlWord' is used or not. The value of alaSdpBindOperControlWord is negotiated with the LDP peer. When both the local and the peer prefer the use of the 'ControlWord', alaSdpBindOperControlWord has the value of 'true'." ::= { alaSdpBindEntry 15 } alaSdpBindNetworkPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the network port associated with a service instance where mpls labeled or b-domain packets ingress and egress." DEFVAL { 0 } ::= { alaSdpBindEntry 16 } alaSdpBindVirtualPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The logical representation of a network port associated with a service instance where mpls labeled or b-domain packets ingress and egress." DEFVAL { 0 } ::= { alaSdpBindEntry 17 } alaSdpBindIsid OBJECT-TYPE SYNTAX INTEGER (256..16777214) MAX-ACCESS read-only STATUS current DESCRIPTION "The i-domain Service Indentifier (I-SID) for the Group Mac assigned to this Multicast SDP Bind." ::= { alaSdpBindEntry 18 } alaSdpBindBVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The Backbone VlanId (BVlan) associated with the Sdp Bind object." ::= { alaSdpBindEntry 19 } alaSdpBindSystemId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The neighbor Backbone MAC (B-MAC) associated with the Sdp Bind object." ::= { alaSdpBindEntry 20 } alaSdpBindSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The neighbor host name associated with the Sdp Bind object for SPB or the interface name to reach the far-end node for VxLAN." ::= { alaSdpBindEntry 21 } alaSdpBindAllocationType OBJECT-TYPE SYNTAX AluAllocationType MAX-ACCESS read-only STATUS current DESCRIPTION "Allocation Type: Static (Manual) or Dynamic (Automatic)." DEFVAL { static } ::= { alaSdpBindEntry 22 } alaSdpBindIngressPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ingress packet count flowing through this SDP Bind." ::= { alaSdpBindEntry 23 } alaSdpBindIngressByteCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ingress byte count flowing through this SDP Bind." ::= { alaSdpBindEntry 24 } alaSdpBindEgressPacketCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total egress packet count flowing through this SDP Bind." ::= { alaSdpBindEntry 25 } alaSdpBindEgressByteCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total egress byte count flowing through this SDP Bind." ::= { alaSdpBindEntry 26 } alaSdpBindCreationOrigin OBJECT-TYPE SYNTAX AluSdpOriginType MAX-ACCESS read-create STATUS current DESCRIPTION "SDP creation origin staticly or dynamically for the tunnel types (MPLS, PBB, VxLAN...)" ::= { alaSdpBindEntry 27 } alaSdpBindFarEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Unicast IP address or the Multicast Group Address of the the SDP" ::= { alaSdpBindEntry 28 } alaSdpBindVnid OBJECT-TYPE SYNTAX Integer32(1..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual network identifier (VNID). A 24-bit value used to designate the individual VXLAN overlay network on which the communicating VMs are situated. VMs in different VXLAN overlay networks cannot communicate with each other. Value 0 and 0xfffffff are currently reserved -- Propietary" ::= { alaSdpBindEntry 29 } alaSdpBindDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "Generic information about this SDP Bind." DEFVAL { "" } ::= { alaSdpBindEntry 30 } alaSdpBindStatsAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "To enable/disable the ingress/egress stats counters on this Bind SDP." ::= { alaSdpBindEntry 31 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Service Manager System Config Table -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaSvcMgrSysTable OBJECT IDENTIFIER ::= { alaServiceMgr 8 } -- SystemId & SystemName for this node alaSvcMgrSysId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "SystemId (System Mac) assigned for this node by chassis supervison after boot-up" ::= { alaSvcMgrSysTable 1 } alaSvcMgrSysName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "SystemName assigned for this node by chassis supervison after boot-up" ::= { alaSvcMgrSysTable 2 } alaSvcMgrSysLastMgmtChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent management-initiated change to this system configuration" ::= { alaSvcMgrSysTable 3 } alaSvcMgrSysLastStatusChange OBJECT-TYPE SYNTAX AluDateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent operating status change to the system configuration" ::= { alaSvcMgrSysTable 4 } -- Trap AdminState for status updates alaSvcMgrSvcTrapAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin state for trap generation upon a service status change" DEFVAL { disable } ::= { alaSvcMgrSysTable 5 } alaSvcMgrSapTrapAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin state for trap generation upon a SAP status change" DEFVAL { disable } ::= { alaSvcMgrSysTable 6 } alaSvcMgrSdpTrapAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin state for trap generation upon a SDP status change" DEFVAL { disable } ::= { alaSvcMgrSysTable 7 } alaSvcMgrSdpBindTrapAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin state for trap generation upon a Service Bind status change" DEFVAL { disable } ::= { alaSvcMgrSysTable 8 } alaSvcMgrMaxTrapPerMinute OBJECT-TYPE SYNTAX INTEGER (1..65534|65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Set maximum trap rate per minute. The value 65535 is for unlimited trap rate." DEFVAL { 60 } ::= { alaSvcMgrSysTable 9 } alaSvcMgrStatsAdminState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The global admin state for Service, SAP, and Sdp Bind statistics. When enabled, each Service/SAP/Bind object can reserve a set of packet/byte counters for ingress and egress flows. When disabled, all stats resources are released." DEFVAL { enable } ::= { alaSvcMgrSysTable 10 } alaSvcMgrVxlanDestUdpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The VXLAN well-known destination UDP Port in the outer UDP header. IANA has assigned the value 4789 for the VXLAN UDP port" DEFVAL { 4789 } ::= { alaSvcMgrSysTable 11 } alaSvcMgrVxlanVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The current VRF instance name associated with VxLAN L3 traffic. The default VRF is assumed if not specifed" ::= { alaSvcMgrSysTable 12 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- -- Service IGMP Configuration Table -- alaServiceMgrIgmp OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 2 } alaIgmpServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Service table contains the information on which IPv4 multicast switching and routing is configured." ::= { alaServiceMgrIgmp 1 } alaIgmpServiceEntry OBJECT-TYPE SYNTAX IgmpServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponds to a service on which IPv4 multicast switching and routing is configured." INDEX { svcId } ::= { alaIgmpServiceTable 1 } IgmpServiceEntry ::= SEQUENCE { alaIgmpServiceStatus INTEGER, alaIgmpServiceQuerying INTEGER, alaIgmpServiceSpoofing INTEGER, alaIgmpServiceZapping INTEGER, alaIgmpServiceVersion Unsigned32, alaIgmpServiceRobustness Unsigned32, alaIgmpServiceQueryInterval Unsigned32, alaIgmpServiceQueryResponseInterval Unsigned32, alaIgmpServiceLastMemberQueryInterval Unsigned32, alaIgmpServiceRouterTimeout Unsigned32, alaIgmpServiceSourceTimeout Unsigned32, alaIgmpServiceProxying INTEGER, alaIgmpServiceUnsolicitedReportInterval Unsigned32, alaIgmpServiceQuerierForwarding INTEGER, alaIgmpServiceMaxGroupLimit Unsigned32, alaIgmpServiceMaxGroupExceedAction INTEGER } alaIgmpServiceStatus OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable IPv4 multicast switching and routing on the Service." ::= { alaIgmpServiceEntry 1 } alaIgmpServiceQuerying OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable IGMP Querying on the Service." ::= { alaIgmpServiceEntry 2 } alaIgmpServiceSpoofing OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable IGMP Spoofing on the Service." ::= { alaIgmpServiceEntry 3 } alaIgmpServiceZapping OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable IGMP Zapping on the Service." ::= { alaIgmpServiceEntry 4 } alaIgmpServiceVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the default IGMP protocol Version running on the Service." ::= { alaIgmpServiceEntry 5 } alaIgmpServiceRobustness OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IGMP Robustness variable used on the Service." ::= { alaIgmpServiceEntry 6 } alaIgmpServiceQueryInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IGMP Query Interval used on the Service." ::= { alaIgmpServiceEntry 7 } alaIgmpServiceQueryResponseInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IGMP Query Response Interval on the Service." ::= { alaIgmpServiceEntry 8 } alaIgmpServiceLastMemberQueryInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IGMP Last Member Query Interval on the Service." ::= { alaIgmpServiceEntry 9 } alaIgmpServiceRouterTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IGMP Router Timeout on the Service." ::= { alaIgmpServiceEntry 10 } alaIgmpServiceSourceTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IGMP Source Timeout on the Service." ::= { alaIgmpServiceEntry 11 } alaIgmpServiceProxying OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable IGMP Proxying on the Service." ::= { alaIgmpServiceEntry 12 } alaIgmpServiceUnsolicitedReportInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the IGMP Unsolicited Report Interval on the Service." ::= { alaIgmpServiceEntry 13 } alaIgmpServiceQuerierForwarding OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable IGMP Querier Forwarding on the Service." ::= { alaIgmpServiceEntry 14 } alaIgmpServiceMaxGroupLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of IGMP Group memberships that can be learnt on the Service." DEFVAL {0} ::= { alaIgmpServiceEntry 15 } alaIgmpServiceMaxGroupExceedAction OBJECT-TYPE SYNTAX INTEGER { none(0), drop(1), replace(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be taken when the IGMP group membership limit is exceeded on the Service." DEFVAL { none } ::= { alaIgmpServiceEntry 16 } -- -- Service Group Membership Table -- alaIgmpMemberServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IGMP group membership information for SAPs." ::= { alaServiceMgrIgmp 2 } alaIgmpMemberServiceSapEntry OBJECT-TYPE SYNTAX IgmpMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IGMP group membership request." INDEX { svcId, sapPortId, sapEncapValue, alaIgmpMemberServiceSapGroupAddressType, alaIgmpMemberServiceSapGroupAddress, alaIgmpMemberServiceSapSourceAddressType, alaIgmpMemberServiceSapSourceAddress } ::= { alaIgmpMemberServiceSapTable 1 } IgmpMemberServiceSapEntry ::= SEQUENCE { alaIgmpMemberServiceSapGroupAddressType InetAddressType, alaIgmpMemberServiceSapGroupAddress InetAddress, alaIgmpMemberServiceSapSourceAddressType InetAddressType, alaIgmpMemberServiceSapSourceAddress InetAddress, alaIgmpMemberServiceSapMode INTEGER, alaIgmpMemberServiceSapCount Counter32, alaIgmpMemberServiceSapTimeout TimeTicks } alaIgmpMemberServiceSapGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpMemberServiceSapEntry 1 } alaIgmpMemberServiceSapGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv4 group address." ::= { alaIgmpMemberServiceSapEntry 2 } alaIgmpMemberServiceSapSourceAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpMemberServiceSapEntry 3 } alaIgmpMemberServiceSapSourceAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv4 source address." ::= { alaIgmpMemberServiceSapEntry 4 } alaIgmpMemberServiceSapMode OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's IGMP source filter mode." ::= { alaIgmpMemberServiceSapEntry 5 } alaIgmpMemberServiceSapCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's counter." ::= { alaIgmpMemberServiceSapEntry 6 } alaIgmpMemberServiceSapTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's timeout." ::= { alaIgmpMemberServiceSapEntry 7} alaIgmpMemberServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IGMP group membership information for SDP bindings." ::= { alaServiceMgrIgmp 3 } alaIgmpMemberServiceSdpBindEntry OBJECT-TYPE SYNTAX IgmpMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IGMP group membership request." INDEX { svcId, sdpBindId, alaIgmpMemberServiceSdpBindGroupAddressType, alaIgmpMemberServiceSdpBindGroupAddress, alaIgmpMemberServiceSdpBindSourceAddressType, alaIgmpMemberServiceSdpBindSourceAddress } ::= { alaIgmpMemberServiceSdpBindTable 1 } IgmpMemberServiceSdpBindEntry ::= SEQUENCE { alaIgmpMemberServiceSdpBindGroupAddressType InetAddressType, alaIgmpMemberServiceSdpBindGroupAddress InetAddress, alaIgmpMemberServiceSdpBindSourceAddressType InetAddressType, alaIgmpMemberServiceSdpBindSourceAddress InetAddress, alaIgmpMemberServiceSdpBindMode INTEGER, alaIgmpMemberServiceSdpBindCount Counter32, alaIgmpMemberServiceSdpBindTimeout TimeTicks } alaIgmpMemberServiceSdpBindGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpMemberServiceSdpBindEntry 1 } alaIgmpMemberServiceSdpBindGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv4 group address." ::= { alaIgmpMemberServiceSdpBindEntry 2 } alaIgmpMemberServiceSdpBindSourceAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpMemberServiceSdpBindEntry 3 } alaIgmpMemberServiceSdpBindSourceAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv4 source address." ::= { alaIgmpMemberServiceSdpBindEntry 4 } alaIgmpMemberServiceSdpBindMode OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's IGMP source filter mode." ::= { alaIgmpMemberServiceSdpBindEntry 5 } alaIgmpMemberServiceSdpBindCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's counter." ::= { alaIgmpMemberServiceSdpBindEntry 6 } alaIgmpMemberServiceSdpBindTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's timeout." ::= { alaIgmpMemberServiceSdpBindEntry 7 } -- -- Static Group Membership Table -- alaIgmpStaticMemberServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap static IGMP group membership information." ::= { alaServiceMgrIgmp 4 } alaIgmpStaticMemberServiceSapEntry OBJECT-TYPE SYNTAX IgmpStaticMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a ervice sap static IGMP group membership request." INDEX { svcId, sapPortId, sapEncapValue, alaIgmpStaticMemberServiceSapGroupAddressType, alaIgmpStaticMemberServiceSapGroupAddress } ::= { alaIgmpStaticMemberServiceSapTable 1 } IgmpStaticMemberServiceSapEntry ::= SEQUENCE { alaIgmpStaticMemberServiceSapGroupAddressType InetAddressType, alaIgmpStaticMemberServiceSapGroupAddress InetAddress, alaIgmpStaticMemberServiceSapRowStatus RowStatus } alaIgmpStaticMemberServiceSapGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpStaticMemberServiceSapEntry 1 } alaIgmpStaticMemberServiceSapGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The service sap static group membership request's IPv4 group address." ::= { alaIgmpStaticMemberServiceSapEntry 2 } alaIgmpStaticMemberServiceSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaIgmpStaticMemberServiceSapEntry 3} alaIgmpStaticMemberServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sdp binding static IGMP group membership information." ::= { alaServiceMgrIgmp 5 } alaIgmpStaticMemberServiceSdpBindEntry OBJECT-TYPE SYNTAX IgmpStaticMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a service sdp binding static IGMP group membership request." INDEX { svcId, sdpBindId, alaIgmpStaticMemberServiceSdpBindGroupAddressType, alaIgmpStaticMemberServiceSdpBindGroupAddress } ::= { alaIgmpStaticMemberServiceSdpBindTable 1 } IgmpStaticMemberServiceSdpBindEntry ::= SEQUENCE { alaIgmpStaticMemberServiceSdpBindGroupAddressType InetAddressType, alaIgmpStaticMemberServiceSdpBindGroupAddress InetAddress, alaIgmpStaticMemberServiceSdpBindRowStatus RowStatus } alaIgmpStaticMemberServiceSdpBindGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpStaticMemberServiceSdpBindEntry 1 } alaIgmpStaticMemberServiceSdpBindGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The service sdp binding static group membership request's IPv4 group address." ::= { alaIgmpStaticMemberServiceSdpBindEntry 2 } alaIgmpStaticMemberServiceSdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaIgmpStaticMemberServiceSdpBindEntry 3} -- -- Neighbor Table -- alaIgmpNeighborServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap neighboring IP multicast routers." ::= { alaServiceMgrIgmp 6 } alaIgmpNeighborServiceSapEntry OBJECT-TYPE SYNTAX IgmpNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast router." INDEX { svcId, sapPortId, sapEncapValue, alaIgmpNeighborServiceSapHostAddressType, alaIgmpNeighborServiceSapHostAddress } ::= { alaIgmpNeighborServiceSapTable 1 } IgmpNeighborServiceSapEntry ::= SEQUENCE { alaIgmpNeighborServiceSapHostAddressType InetAddressType, alaIgmpNeighborServiceSapHostAddress InetAddress, alaIgmpNeighborServiceSapCount Counter32, alaIgmpNeighborServiceSapTimeout TimeTicks } alaIgmpNeighborServiceSapHostAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpNeighborServiceSapEntry 1 } alaIgmpNeighborServiceSapHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast router's IPv4 host address." ::= { alaIgmpNeighborServiceSapEntry 2 } alaIgmpNeighborServiceSapCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's counter." ::= { alaIgmpNeighborServiceSapEntry 3 } alaIgmpNeighborServiceSapTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's timeout." ::= { alaIgmpNeighborServiceSapEntry 4 } alaIgmpNeighborServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind neighboring IP multicast routers." ::= { alaServiceMgrIgmp 7 } alaIgmpNeighborServiceSdpBindEntry OBJECT-TYPE SYNTAX IgmpNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast router." INDEX { svcId, sdpBindId, alaIgmpNeighborServiceSdpBindHostAddressType, alaIgmpNeighborServiceSdpBindHostAddress } ::= { alaIgmpNeighborServiceSdpBindTable 1 } IgmpNeighborServiceSdpBindEntry ::= SEQUENCE { alaIgmpNeighborServiceSdpBindHostAddressType InetAddressType, alaIgmpNeighborServiceSdpBindHostAddress InetAddress, alaIgmpNeighborServiceSdpBindCount Counter32, alaIgmpNeighborServiceSdpBindTimeout TimeTicks } alaIgmpNeighborServiceSdpBindHostAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpNeighborServiceSdpBindEntry 1 } alaIgmpNeighborServiceSdpBindHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast router's IPv4 host address." ::= { alaIgmpNeighborServiceSdpBindEntry 2 } alaIgmpNeighborServiceSdpBindCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's counter." ::= { alaIgmpNeighborServiceSdpBindEntry 3 } alaIgmpNeighborServiceSdpBindTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's timeout." ::= { alaIgmpNeighborServiceSdpBindEntry 4 } -- -- Static Neighbor Table -- alaIgmpStaticNeighborServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap static IP multicast routers." ::= { alaServiceMgrIgmp 8 } alaIgmpStaticNeighborServiceSapEntry OBJECT-TYPE SYNTAX IgmpStaticNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a service sap static IP multicast router." INDEX { svcId, sapPortId, sapEncapValue } ::= { alaIgmpStaticNeighborServiceSapTable 1 } IgmpStaticNeighborServiceSapEntry ::= SEQUENCE { alaIgmpStaticNeighborServiceSapRowStatus RowStatus } alaIgmpStaticNeighborServiceSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaIgmpStaticNeighborServiceSapEntry 1 } alaIgmpStaticNeighborServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind static IP multicast routers." ::= { alaServiceMgrIgmp 9 } alaIgmpStaticNeighborServiceSdpBindEntry OBJECT-TYPE SYNTAX IgmpStaticNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a service SdpBind static IP multicast router." INDEX { svcId, sdpBindId } ::= { alaIgmpStaticNeighborServiceSdpBindTable 1 } IgmpStaticNeighborServiceSdpBindEntry ::= SEQUENCE { alaIgmpStaticNeighborServiceSdpBindRowStatus RowStatus } alaIgmpStaticNeighborServiceSdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaIgmpStaticNeighborServiceSdpBindEntry 1 } -- -- Querier Table -- alaIgmpQuerierServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap neighboring IGMP queriers." ::= { alaServiceMgrIgmp 10 } alaIgmpQuerierServiceSapEntry OBJECT-TYPE SYNTAX IgmpQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IGMP querier." INDEX { svcId, sapPortId, sapEncapValue, alaIgmpQuerierServiceSapHostAddressType, alaIgmpQuerierServiceSapHostAddress } ::= { alaIgmpQuerierServiceSapTable 1 } IgmpQuerierServiceSapEntry ::= SEQUENCE { alaIgmpQuerierServiceSapHostAddressType InetAddressType, alaIgmpQuerierServiceSapHostAddress InetAddress, alaIgmpQuerierServiceSapCount Counter32, alaIgmpQuerierServiceSapTimeout TimeTicks } alaIgmpQuerierServiceSapHostAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpQuerierServiceSapEntry 1 } alaIgmpQuerierServiceSapHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP querier's IPv4 host address." ::= { alaIgmpQuerierServiceSapEntry 2 } alaIgmpQuerierServiceSapCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP querier's counter." ::= { alaIgmpQuerierServiceSapEntry 3 } alaIgmpQuerierServiceSapTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP querier's timeout." ::= { alaIgmpQuerierServiceSapEntry 4 } alaIgmpQuerierServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind neighboring IGMP queriers." ::= { alaServiceMgrIgmp 11 } alaIgmpQuerierServiceSdpBindEntry OBJECT-TYPE SYNTAX IgmpQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IGMP querier." INDEX { svcId, sdpBindId, alaIgmpQuerierServiceSdpBindHostAddressType, alaIgmpQuerierServiceSdpBindHostAddress } ::= { alaIgmpQuerierServiceSdpBindTable 1 } IgmpQuerierServiceSdpBindEntry ::= SEQUENCE { alaIgmpQuerierServiceSdpBindHostAddressType InetAddressType, alaIgmpQuerierServiceSdpBindHostAddress InetAddress, alaIgmpQuerierServiceSdpBindCount Counter32, alaIgmpQuerierServiceSdpBindTimeout TimeTicks } alaIgmpQuerierServiceSdpBindHostAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpQuerierServiceSdpBindEntry 1 } alaIgmpQuerierServiceSdpBindHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP querier's IPv4 host address." ::= { alaIgmpQuerierServiceSdpBindEntry 2 } alaIgmpQuerierServiceSdpBindCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP querier's counter." ::= { alaIgmpQuerierServiceSdpBindEntry 3 } alaIgmpQuerierServiceSdpBindTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The IGMP querier's timeout." ::= { alaIgmpQuerierServiceSdpBindEntry 4 } -- -- Static Querier Table -- alaIgmpStaticQuerierServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap static IGMP queriers." ::= { alaServiceMgrIgmp 12 } alaIgmpStaticQuerierServiceSapEntry OBJECT-TYPE SYNTAX IgmpStaticQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a static IGMP querier." INDEX { svcId, sapPortId, sapEncapValue } ::= { alaIgmpStaticQuerierServiceSapTable 1 } IgmpStaticQuerierServiceSapEntry ::= SEQUENCE { alaIgmpStaticQuerierServiceSapRowStatus RowStatus } alaIgmpStaticQuerierServiceSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaIgmpStaticQuerierServiceSapEntry 1 } alaIgmpStaticQuerierServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpStaticQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind static IGMP queriers." ::= { alaServiceMgrIgmp 13 } alaIgmpStaticQuerierServiceSdpBindEntry OBJECT-TYPE SYNTAX IgmpStaticQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a static IGMP querier." INDEX { svcId, sdpBindId } ::= { alaIgmpStaticQuerierServiceSdpBindTable 1 } IgmpStaticQuerierServiceSdpBindEntry ::= SEQUENCE { alaIgmpStaticQuerierServiceSdpBindRowStatus RowStatus } alaIgmpStaticQuerierServiceSdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaIgmpStaticQuerierServiceSdpBindEntry 1 } -- -- Source Table -- alaIgmpServiceSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpServiceSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the Service IP multicast source information." ::= { alaServiceMgrIgmp 14 } alaIgmpServiceSourceEntry OBJECT-TYPE SYNTAX IgmpServiceSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast source flow." INDEX { svcId, alaIgmpServiceSourceGroupAddressType, alaIgmpServiceSourceGroupAddress, alaIgmpServiceSourceHostAddressType, alaIgmpServiceSourceHostAddress, alaIgmpServiceSourceDestAddressType, alaIgmpServiceSourceDestAddress, alaIgmpServiceSourceOrigAddressType, alaIgmpServiceSourceOrigAddress } ::= { alaIgmpServiceSourceTable 1 } IgmpServiceSourceEntry ::= SEQUENCE { alaIgmpServiceSourceGroupAddressType InetAddressType, alaIgmpServiceSourceGroupAddress InetAddress, alaIgmpServiceSourceHostAddressType InetAddressType, alaIgmpServiceSourceHostAddress InetAddress, alaIgmpServiceSourceDestAddressType InetAddressType, alaIgmpServiceSourceDestAddress InetAddress, alaIgmpServiceSourceOrigAddressType InetAddressType, alaIgmpServiceSourceOrigAddress InetAddress, alaIgmpServiceSourceLocale AluLocation, alaIgmpServiceSourcePortId TmnxPortID, alaIgmpServiceSourceEncapValue TmnxEncapVal, alaIgmpServiceSourceSdpId SdpId, alaIgmpServiceSourceVcId TmnxVcIdOrNone, alaIgmpServiceSourceType INTEGER } alaIgmpServiceSourceGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpServiceSourceEntry 1 } alaIgmpServiceSourceGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv4 group address." ::= { alaIgmpServiceSourceEntry 2 } alaIgmpServiceSourceHostAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpServiceSourceEntry 3 } alaIgmpServiceSourceHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv4 host address." ::= { alaIgmpServiceSourceEntry 4 } alaIgmpServiceSourceDestAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpServiceSourceEntry 5 } alaIgmpServiceSourceDestAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv4 tunnel destination address." ::= { alaIgmpServiceSourceEntry 6 } alaIgmpServiceSourceOrigAddressType OBJECT-TYPE SYNTAX InetAddressType (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv4." ::= { alaIgmpServiceSourceEntry 7 } alaIgmpServiceSourceOrigAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv4 tunnel source address." ::= { alaIgmpServiceSourceEntry 8 } alaIgmpServiceSourceLocale OBJECT-TYPE SYNTAX AluLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSourceLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'." ::= { alaIgmpServiceSourceEntry 9 } alaIgmpServiceSourcePortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSourcePortId indicates, together with the object alaIgmpServiceSourceEncapValue, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgMRouterLocale is 'sap(1)'." ::= { alaIgmpServiceSourceEntry 10 } alaIgmpServiceSourceEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSourceEncapValue indicates, together with the objectalaIgmpServiceSourcePortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSourceLocale is 'sap(1)'." ::= { alaIgmpServiceSourceEntry 11 } alaIgmpServiceSourceSdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSourceSdpId indicates, together with the object alaIgmpServiceSourceVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSourceLocale is 'sdp(2)'." ::= { alaIgmpServiceSourceEntry 12 } alaIgmpServiceSourceVcId OBJECT-TYPE SYNTAX TmnxVcIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSourceVcId indicates, together with the object alaIgmpServiceSourceSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSourceLocale is 'sdp(2)'." ::= { alaIgmpServiceSourceEntry 13 } alaIgmpServiceSourceType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast source flow's encapsulation type." ::= { alaIgmpServiceSourceEntry 14 } -- -- Forward Table -- alaIgmpServiceSapForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpServiceSapForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast forward information." ::= { alaServiceMgrIgmp 15 } alaIgmpServiceSapForwardEntry OBJECT-TYPE SYNTAX IgmpServiceSapForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast forwarded flow." INDEX { svcId, alaIgmpServiceSapForwardGroupAddress, alaIgmpServiceSapForwardHostAddress, alaIgmpServiceSapForwardDestAddress, alaIgmpServiceSapForwardOrigAddress, alaIgmpServiceSapForwardNextSapPortId, alaIgmpServiceSapForwardNextSapEncapValue } ::= { alaIgmpServiceSapForwardTable 1 } IgmpServiceSapForwardEntry ::= SEQUENCE { alaIgmpServiceSapForwardLocale AluLocation, alaIgmpServiceSapForwardPortId TmnxPortID, alaIgmpServiceSapForwardEncapValue TmnxEncapVal, alaIgmpServiceSapForwardSdpId SdpId, alaIgmpServiceSapForwardVcId TmnxVcIdOrNone, alaIgmpServiceSapForwardGroupAddress MacAddress, alaIgmpServiceSapForwardHostAddress MacAddress, alaIgmpServiceSapForwardDestAddress MacAddress, alaIgmpServiceSapForwardOrigAddress MacAddress, alaIgmpServiceSapForwardType INTEGER, alaIgmpServiceSapForwardNextSapPortId TmnxPortID, alaIgmpServiceSapForwardNextSapEncapValue TmnxEncapVal, alaIgmpServiceSapForwardNextType INTEGER } alaIgmpServiceSapForwardLocale OBJECT-TYPE SYNTAX AluLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSapForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'." ::= { alaIgmpServiceSapForwardEntry 1 } alaIgmpServiceSapForwardPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSapForwardPortId indicates, together with the object alaIgmpServiceSapForwardEncapValue, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgMRouterLocale is 'sap(1)'." ::= { alaIgmpServiceSapForwardEntry 2 } alaIgmpServiceSapForwardEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSapForwardEncapValue indicates, together with the objectalaIgmpServiceSapForwardPortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSapForwardLocale is 'sap(1)'." ::= { alaIgmpServiceSapForwardEntry 3 } alaIgmpServiceSapForwardSdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSapForwardSdpId indicates, together with the object alaIgmpServiceSapForwardVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSapForwardLocale is 'sdp(2)'." ::= { alaIgmpServiceSapForwardEntry 4 } alaIgmpServiceSapForwardVcId OBJECT-TYPE SYNTAX TmnxVcIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSapForwardVcId indicates, together with the object alaIgmpServiceSapForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSapForwardLocale is 'sdp(2)'." ::= { alaIgmpServiceSapForwardEntry 5 } alaIgmpServiceSapForwardGroupAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 group address." ::= { alaIgmpServiceSapForwardEntry 6 } alaIgmpServiceSapForwardHostAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 host address." ::= { alaIgmpServiceSapForwardEntry 7 } alaIgmpServiceSapForwardDestAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 tunnel destination address." ::= { alaIgmpServiceSapForwardEntry 8 } alaIgmpServiceSapForwardOrigAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 tunnel source address." ::= { alaIgmpServiceSapForwardEntry 9 } alaIgmpServiceSapForwardType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's encapsulation type." ::= { alaIgmpServiceSapForwardEntry 10 } alaIgmpServiceSapForwardNextSapPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's next SAP. The ID of the access port where this SAP is defined." ::= { alaIgmpServiceSapForwardEntry 11 } alaIgmpServiceSapForwardNextSapEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's next SAP. The value of the label used to identify this SAP on the access port specified by sapPortId." ::= { alaIgmpServiceSapForwardEntry 12 } alaIgmpServiceSapForwardNextType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's next encapsulation type." ::= { alaIgmpServiceSapForwardEntry 13 } alaIgmpServiceSdpBindForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpServiceSdpBindForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast forward information." ::= { alaServiceMgrIgmp 16 } alaIgmpServiceSdpBindForwardEntry OBJECT-TYPE SYNTAX IgmpServiceSdpBindForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast forwarded flow." INDEX { svcId, alaIgmpServiceSdpBindForwardGroupAddress, alaIgmpServiceSdpBindForwardHostAddress, alaIgmpServiceSdpBindForwardDestAddress, alaIgmpServiceSdpBindForwardOrigAddress, alaIgmpServiceSdpBindForwardNextSdpBindId } ::= { alaIgmpServiceSdpBindForwardTable 1 } IgmpServiceSdpBindForwardEntry ::= SEQUENCE { alaIgmpServiceSdpBindForwardLocale AluLocation, alaIgmpServiceSdpBindForwardPortId TmnxPortID, alaIgmpServiceSdpBindForwardEncapValue TmnxEncapVal, alaIgmpServiceSdpBindForwardSdpId SdpId, alaIgmpServiceSdpBindForwardVcId TmnxVcIdOrNone, alaIgmpServiceSdpBindForwardGroupAddress MacAddress, alaIgmpServiceSdpBindForwardHostAddress MacAddress, alaIgmpServiceSdpBindForwardDestAddress MacAddress, alaIgmpServiceSdpBindForwardOrigAddress MacAddress, alaIgmpServiceSdpBindForwardType INTEGER, alaIgmpServiceSdpBindForwardNextSdpBindId SdpBindId, alaIgmpServiceSdpBindForwardNextType INTEGER } alaIgmpServiceSdpBindForwardLocale OBJECT-TYPE SYNTAX AluLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSdpBindForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'." ::= { alaIgmpServiceSdpBindForwardEntry 1 } alaIgmpServiceSdpBindForwardPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSdpBindForwardPortId indicates, together with the object alaIgmpServiceSdpBindForwardEncapValue, the SdpBind on which this multicast router is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgMRouterLocale is 'sap(1)'." ::= { alaIgmpServiceSdpBindForwardEntry 2 } alaIgmpServiceSdpBindForwardEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSdpBindForwardEncapValue indicates, together with the object alaIgmpServiceSdpBindForwardPortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSdpBindForwardLocale is 'sap(1)'." ::= { alaIgmpServiceSdpBindForwardEntry 3 } alaIgmpServiceSdpBindForwardSdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSdpBindForwardSdpId indicates, together with the object alaIgmpServiceSdpBindForwardVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSdpBindForwardLocale is 'sdp(2)'." ::= { alaIgmpServiceSdpBindForwardEntry 4 } alaIgmpServiceSdpBindForwardVcId OBJECT-TYPE SYNTAX TmnxVcIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaIgmpServiceSdpBindForwardVcId indicates, together with the object alaIgmpServiceSdpBindForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaIgmpServiceSdpBindForwardLocale is 'sdp(2)'." ::= { alaIgmpServiceSdpBindForwardEntry 5 } alaIgmpServiceSdpBindForwardGroupAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 group address." ::= { alaIgmpServiceSdpBindForwardEntry 6 } alaIgmpServiceSdpBindForwardHostAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 host address." ::= { alaIgmpServiceSdpBindForwardEntry 7 } alaIgmpServiceSdpBindForwardDestAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 tunnel destination address." ::= { alaIgmpServiceSdpBindForwardEntry 8 } alaIgmpServiceSdpBindForwardOrigAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv4 tunnel source address." ::= { alaIgmpServiceSdpBindForwardEntry 9 } alaIgmpServiceSdpBindForwardType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's encapsulation type." ::= { alaIgmpServiceSdpBindForwardEntry 10 } alaIgmpServiceSdpBindForwardNextSdpBindId OBJECT-TYPE SYNTAX SdpBindId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's next sdpBind." ::= { alaIgmpServiceSdpBindForwardEntry 11 } alaIgmpServiceSdpBindForwardNextType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's next encapsulation type." ::= { alaIgmpServiceSdpBindForwardEntry 12 } -- -- SAP/SDPBIND Table for IP Multicast objects managed per SAP/SDPBIND -- alaIgmpServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIgmpServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast port information." ::= { alaServiceMgrIgmp 17 } alaIgmpServiceSapEntry OBJECT-TYPE SYNTAX AlaIgmpServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to IP multicast Service SAP information." INDEX { svcId, sapPortId, sapEncapValue } ::= { alaIgmpServiceSapTable 1 } AlaIgmpServiceSapEntry ::= SEQUENCE { alaIgmpServiceSapMaxGroupLimit Unsigned32, alaIgmpServiceSapMaxGroupExceedAction INTEGER, alaIgmpServiceSapCurrentGroupCount Unsigned32 } alaIgmpServiceSapMaxGroupLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of IGMP Group memberships that can be learnt on the sap." DEFVAL {0} ::= { alaIgmpServiceSapEntry 1 } alaIgmpServiceSapMaxGroupExceedAction OBJECT-TYPE SYNTAX INTEGER { none(0), drop(1), replace(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be taken when IGMP group membership limit is exceeded for the sap." DEFVAL { none } ::= { alaIgmpServiceSapEntry 2 } alaIgmpServiceSapCurrentGroupCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP multicast group memberships on a sap. instance." ::= { alaIgmpServiceSapEntry 3 } alaIgmpServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaIgmpServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast port information." ::= { alaServiceMgrIgmp 18 } alaIgmpServiceSdpBindEntry OBJECT-TYPE SYNTAX AlaIgmpServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to IP multicast Service SdpBind information." INDEX { svcId, sdpBindId } ::= { alaIgmpServiceSdpBindTable 1 } AlaIgmpServiceSdpBindEntry ::= SEQUENCE { alaIgmpServiceSdpBindMaxGroupLimit Unsigned32, alaIgmpServiceSdpBindMaxGroupExceedAction INTEGER, alaIgmpServiceSdpBindCurrentGroupCount Unsigned32 } alaIgmpServiceSdpBindMaxGroupLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of IGMP Group memberships that can be learnt on the SdpBind." DEFVAL {0} ::= { alaIgmpServiceSdpBindEntry 1 } alaIgmpServiceSdpBindMaxGroupExceedAction OBJECT-TYPE SYNTAX INTEGER { none(0), drop(1), replace(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be taken when IGMP group membership limit is exceeded for the SdpBind." DEFVAL { none } ::= { alaIgmpServiceSdpBindEntry 2 } alaIgmpServiceSdpBindCurrentGroupCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP multicast group memberships on a SdpBind. instance." ::= { alaIgmpServiceSdpBindEntry 3 } -- -- Service MLD Configuration Table -- alaServiceMgrMld OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 3 } alaMldServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF MldServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Service table contains the information on which IPv6 multicast switching and routing is configured." ::= { alaServiceMgrMld 1 } alaMldServiceEntry OBJECT-TYPE SYNTAX MldServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponds to a service on which IPv6 multicast switching and routing is configured." INDEX { svcId } ::= { alaMldServiceTable 1 } MldServiceEntry ::= SEQUENCE { alaMldServiceStatus INTEGER, alaMldServiceQuerying INTEGER, alaMldServiceSpoofing INTEGER, alaMldServiceZapping INTEGER, alaMldServiceVersion Unsigned32, alaMldServiceRobustness Unsigned32, alaMldServiceQueryInterval Unsigned32, alaMldServiceQueryResponseInterval Unsigned32, alaMldServiceLastMemberQueryInterval Unsigned32, alaMldServiceRouterTimeout Unsigned32, alaMldServiceSourceTimeout Unsigned32, alaMldServiceProxying INTEGER, alaMldServiceUnsolicitedReportInterval Unsigned32, alaMldServiceQuerierForwarding INTEGER, alaMldServiceMaxGroupLimit Unsigned32, alaMldServiceMaxGroupExceedAction INTEGER } alaMldServiceStatus OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable IPv6 multicast switching and routing on the Service." ::= { alaMldServiceEntry 1 } alaMldServiceQuerying OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable MLD Querying on the Service." ::= { alaMldServiceEntry 2 } alaMldServiceSpoofing OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable MLD Spoofing on the Service." ::= { alaMldServiceEntry 3 } alaMldServiceZapping OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable MLD Zapping on the Service." ::= { alaMldServiceEntry 4 } alaMldServiceVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the default MLD protocol Version running on the Service." ::= { alaMldServiceEntry 5 } alaMldServiceRobustness OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the MLD Robustness variable used on the Service." ::= { alaMldServiceEntry 6 } alaMldServiceQueryInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the MLD Query Interval used on the Service." ::= { alaMldServiceEntry 7 } alaMldServiceQueryResponseInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the MLD Query Response Interval on the Service." ::= { alaMldServiceEntry 8 } alaMldServiceLastMemberQueryInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the MLD Last Member Query Interval on the Service." ::= { alaMldServiceEntry 9 } alaMldServiceRouterTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the MLD Router Timeout on the Service." ::= { alaMldServiceEntry 10 } alaMldServiceSourceTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the MLD Source Timeout on the Service." ::= { alaMldServiceEntry 11 } alaMldServiceProxying OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable MLD Proxying on the Service." ::= { alaMldServiceEntry 12 } alaMldServiceUnsolicitedReportInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the MLD Unsolicited Report Interval on the Service." ::= { alaMldServiceEntry 13 } alaMldServiceQuerierForwarding OBJECT-TYPE SYNTAX INTEGER { none(0), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable MLD Querier Forwarding on the Service." ::= { alaMldServiceEntry 14 } alaMldServiceMaxGroupLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of MLD Group memberships that can be learnt on the Service." DEFVAL {0} ::= { alaMldServiceEntry 15 } alaMldServiceMaxGroupExceedAction OBJECT-TYPE SYNTAX INTEGER { none(0), drop(1), replace(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be taken when the MLD group membership limit is exceeded on the Service." DEFVAL { none } ::= { alaMldServiceEntry 16 } -- -- Service Group Membership Table -- alaMldMemberServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF MldMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the MLD group membership information for SAPs." ::= { alaServiceMgrMld 2 } alaMldMemberServiceSapEntry OBJECT-TYPE SYNTAX MldMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an MLD group membership request." INDEX { svcId, sapPortId, sapEncapValue, alaMldMemberServiceSapGroupAddressType, alaMldMemberServiceSapGroupAddress, alaMldMemberServiceSapSourceAddressType, alaMldMemberServiceSapSourceAddress } ::= { alaMldMemberServiceSapTable 1 } MldMemberServiceSapEntry ::= SEQUENCE { alaMldMemberServiceSapGroupAddressType InetAddressType, alaMldMemberServiceSapGroupAddress InetAddress, alaMldMemberServiceSapSourceAddressType InetAddressType, alaMldMemberServiceSapSourceAddress InetAddress, alaMldMemberServiceSapMode INTEGER, alaMldMemberServiceSapCount Counter32, alaMldMemberServiceSapTimeout TimeTicks } alaMldMemberServiceSapGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldMemberServiceSapEntry 1 } alaMldMemberServiceSapGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv6 group address." ::= { alaMldMemberServiceSapEntry 2 } alaMldMemberServiceSapSourceAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldMemberServiceSapEntry 3 } alaMldMemberServiceSapSourceAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv6 source address." ::= { alaMldMemberServiceSapEntry 4 } alaMldMemberServiceSapMode OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's MLD source filter mode." ::= { alaMldMemberServiceSapEntry 5 } alaMldMemberServiceSapCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's counter." ::= { alaMldMemberServiceSapEntry 6 } alaMldMemberServiceSapTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's timeout." ::= { alaMldMemberServiceSapEntry 7 } alaMldMemberServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF MldMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the MLD group membership information for SDP bindings." ::= { alaServiceMgrMld 3 } alaMldMemberServiceSdpBindEntry OBJECT-TYPE SYNTAX MldMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an MLD group membership request." INDEX { svcId, sdpBindId, alaMldMemberServiceSdpBindGroupAddressType, alaMldMemberServiceSdpBindGroupAddress, alaMldMemberServiceSdpBindSourceAddressType, alaMldMemberServiceSdpBindSourceAddress } ::= { alaMldMemberServiceSdpBindTable 1 } MldMemberServiceSdpBindEntry ::= SEQUENCE { alaMldMemberServiceSdpBindGroupAddressType InetAddressType, alaMldMemberServiceSdpBindGroupAddress InetAddress, alaMldMemberServiceSdpBindSourceAddressType InetAddressType, alaMldMemberServiceSdpBindSourceAddress InetAddress, alaMldMemberServiceSdpBindMode INTEGER, alaMldMemberServiceSdpBindCount Counter32, alaMldMemberServiceSdpBindTimeout TimeTicks } alaMldMemberServiceSdpBindGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldMemberServiceSdpBindEntry 1 } alaMldMemberServiceSdpBindGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv6 group address." ::= { alaMldMemberServiceSdpBindEntry 2 } alaMldMemberServiceSdpBindSourceAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldMemberServiceSdpBindEntry 3 } alaMldMemberServiceSdpBindSourceAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group membership request's IPv6 source address." ::= { alaMldMemberServiceSdpBindEntry 4 } alaMldMemberServiceSdpBindMode OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's MLD source filter mode." ::= { alaMldMemberServiceSdpBindEntry 5 } alaMldMemberServiceSdpBindCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's counter." ::= { alaMldMemberServiceSdpBindEntry 6 } alaMldMemberServiceSdpBindTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The group membership request's timeout." ::= { alaMldMemberServiceSdpBindEntry 7 } -- -- Static Group Membership Table -- alaMldStaticMemberServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF MldStaticMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap static MLD group membership information." ::= { alaServiceMgrMld 4 } alaMldStaticMemberServiceSapEntry OBJECT-TYPE SYNTAX MldStaticMemberServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a ervice sap static MLD group membership request." INDEX { svcId, sapPortId, sapEncapValue, alaMldStaticMemberServiceSapGroupAddressType, alaMldStaticMemberServiceSapGroupAddress } ::= { alaMldStaticMemberServiceSapTable 1 } MldStaticMemberServiceSapEntry ::= SEQUENCE { alaMldStaticMemberServiceSapGroupAddressType InetAddressType, alaMldStaticMemberServiceSapGroupAddress InetAddress, alaMldStaticMemberServiceSapRowStatus RowStatus } alaMldStaticMemberServiceSapGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldStaticMemberServiceSapEntry 1 } alaMldStaticMemberServiceSapGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The service sap static group membership request's IPv6 group address." ::= { alaMldStaticMemberServiceSapEntry 2 } alaMldStaticMemberServiceSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaMldStaticMemberServiceSapEntry 3} alaMldStaticMemberServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF MldStaticMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sdp binding static MLD group membership information." ::= { alaServiceMgrMld 5 } alaMldStaticMemberServiceSdpBindEntry OBJECT-TYPE SYNTAX MldStaticMemberServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a service sdp binding static MLD group membership request." INDEX { svcId, sdpBindId, alaMldStaticMemberServiceSdpBindGroupAddressType, alaMldStaticMemberServiceSdpBindGroupAddress } ::= { alaMldStaticMemberServiceSdpBindTable 1 } MldStaticMemberServiceSdpBindEntry ::= SEQUENCE { alaMldStaticMemberServiceSdpBindGroupAddressType InetAddressType, alaMldStaticMemberServiceSdpBindGroupAddress InetAddress, alaMldStaticMemberServiceSdpBindRowStatus RowStatus } alaMldStaticMemberServiceSdpBindGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldStaticMemberServiceSdpBindEntry 1 } alaMldStaticMemberServiceSdpBindGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The service sdp binding static group membership request's IPv6 group address." ::= { alaMldStaticMemberServiceSdpBindEntry 2 } alaMldStaticMemberServiceSdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaMldStaticMemberServiceSdpBindEntry 3} -- -- Neighbor Table -- alaMldNeighborServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF MldNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap neighboring IP multicast routers." ::= { alaServiceMgrMld 6 } alaMldNeighborServiceSapEntry OBJECT-TYPE SYNTAX MldNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast router." INDEX { svcId, sapPortId, sapEncapValue, alaMldNeighborServiceSapHostAddressType, alaMldNeighborServiceSapHostAddress } ::= { alaMldNeighborServiceSapTable 1 } MldNeighborServiceSapEntry ::= SEQUENCE { alaMldNeighborServiceSapHostAddressType InetAddressType, alaMldNeighborServiceSapHostAddress InetAddress, alaMldNeighborServiceSapCount Counter32, alaMldNeighborServiceSapTimeout TimeTicks } alaMldNeighborServiceSapHostAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldNeighborServiceSapEntry 1 } alaMldNeighborServiceSapHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast router's IPv6 host address." ::= { alaMldNeighborServiceSapEntry 2 } alaMldNeighborServiceSapCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's counter." ::= { alaMldNeighborServiceSapEntry 3 } alaMldNeighborServiceSapTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's timeout." ::= { alaMldNeighborServiceSapEntry 4 } alaMldNeighborServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF MldNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind neighboring IP multicast routers." ::= { alaServiceMgrMld 7 } alaMldNeighborServiceSdpBindEntry OBJECT-TYPE SYNTAX MldNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast router." INDEX { svcId, sdpBindId, alaMldNeighborServiceSdpBindHostAddressType, alaMldNeighborServiceSdpBindHostAddress } ::= { alaMldNeighborServiceSdpBindTable 1 } MldNeighborServiceSdpBindEntry ::= SEQUENCE { alaMldNeighborServiceSdpBindHostAddressType InetAddressType, alaMldNeighborServiceSdpBindHostAddress InetAddress, alaMldNeighborServiceSdpBindCount Counter32, alaMldNeighborServiceSdpBindTimeout TimeTicks } alaMldNeighborServiceSdpBindHostAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldNeighborServiceSdpBindEntry 1 } alaMldNeighborServiceSdpBindHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast router's IPv6 host address." ::= { alaMldNeighborServiceSdpBindEntry 2 } alaMldNeighborServiceSdpBindCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's counter." ::= { alaMldNeighborServiceSdpBindEntry 3 } alaMldNeighborServiceSdpBindTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast router's timeout." ::= { alaMldNeighborServiceSdpBindEntry 4 } -- -- Static Neighbor Table -- alaMldStaticNeighborServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF MldStaticNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap static IP multicast routers." ::= { alaServiceMgrMld 8 } alaMldStaticNeighborServiceSapEntry OBJECT-TYPE SYNTAX MldStaticNeighborServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a service sap static IP multicast router." INDEX { svcId, sapPortId, sapEncapValue } ::= { alaMldStaticNeighborServiceSapTable 1 } MldStaticNeighborServiceSapEntry ::= SEQUENCE { alaMldStaticNeighborServiceSapRowStatus RowStatus } alaMldStaticNeighborServiceSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaMldStaticNeighborServiceSapEntry 1 } alaMldStaticNeighborServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF MldStaticNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind static IP multicast routers." ::= { alaServiceMgrMld 9 } alaMldStaticNeighborServiceSdpBindEntry OBJECT-TYPE SYNTAX MldStaticNeighborServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a service SdpBind static IP multicast router." INDEX { svcId, sdpBindId } ::= { alaMldStaticNeighborServiceSdpBindTable 1 } MldStaticNeighborServiceSdpBindEntry ::= SEQUENCE { alaMldStaticNeighborServiceSdpBindRowStatus RowStatus } alaMldStaticNeighborServiceSdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaMldStaticNeighborServiceSdpBindEntry 1 } -- -- Querier Table -- alaMldQuerierServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF MldQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap neighboring MLD queriers." ::= { alaServiceMgrMld 10 } alaMldQuerierServiceSapEntry OBJECT-TYPE SYNTAX MldQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an MLD querier." INDEX { svcId, sapPortId, sapEncapValue, alaMldQuerierServiceSapHostAddressType, alaMldQuerierServiceSapHostAddress } ::= { alaMldQuerierServiceSapTable 1 } MldQuerierServiceSapEntry ::= SEQUENCE { alaMldQuerierServiceSapHostAddressType InetAddressType, alaMldQuerierServiceSapHostAddress InetAddress, alaMldQuerierServiceSapCount Counter32, alaMldQuerierServiceSapTimeout TimeTicks } alaMldQuerierServiceSapHostAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldQuerierServiceSapEntry 1 } alaMldQuerierServiceSapHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MLD querier's IPv6 host address." ::= { alaMldQuerierServiceSapEntry 2 } alaMldQuerierServiceSapCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MLD querier's counter." ::= { alaMldQuerierServiceSapEntry 3 } alaMldQuerierServiceSapTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The MLD querier's timeout." ::= { alaMldQuerierServiceSapEntry 4 } alaMldQuerierServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF MldQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind neighboring MLD queriers." ::= { alaServiceMgrMld 11 } alaMldQuerierServiceSdpBindEntry OBJECT-TYPE SYNTAX MldQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an MLD querier." INDEX { svcId, sdpBindId, alaMldQuerierServiceSdpBindHostAddressType, alaMldQuerierServiceSdpBindHostAddress } ::= { alaMldQuerierServiceSdpBindTable 1 } MldQuerierServiceSdpBindEntry ::= SEQUENCE { alaMldQuerierServiceSdpBindHostAddressType InetAddressType, alaMldQuerierServiceSdpBindHostAddress InetAddress, alaMldQuerierServiceSdpBindCount Counter32, alaMldQuerierServiceSdpBindTimeout TimeTicks } alaMldQuerierServiceSdpBindHostAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldQuerierServiceSdpBindEntry 1 } alaMldQuerierServiceSdpBindHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MLD querier's IPv6 host address." ::= { alaMldQuerierServiceSdpBindEntry 2 } alaMldQuerierServiceSdpBindCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MLD querier's counter." ::= { alaMldQuerierServiceSdpBindEntry 3 } alaMldQuerierServiceSdpBindTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The MLD querier's timeout." ::= { alaMldQuerierServiceSdpBindEntry 4 } -- -- Static Querier Table -- alaMldStaticQuerierServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF MldStaticQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service sap static MLD queriers." ::= { alaServiceMgrMld 12 } alaMldStaticQuerierServiceSapEntry OBJECT-TYPE SYNTAX MldStaticQuerierServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a static MLD querier." INDEX { svcId, sapPortId, sapEncapValue } ::= { alaMldStaticQuerierServiceSapTable 1 } MldStaticQuerierServiceSapEntry ::= SEQUENCE { alaMldStaticQuerierServiceSapRowStatus RowStatus } alaMldStaticQuerierServiceSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaMldStaticQuerierServiceSapEntry 1 } alaMldStaticQuerierServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF MldStaticQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the service SdpBind static MLD queriers." ::= { alaServiceMgrMld 13 } alaMldStaticQuerierServiceSdpBindEntry OBJECT-TYPE SYNTAX MldStaticQuerierServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a static MLD querier." INDEX { svcId, sdpBindId } ::= { alaMldStaticQuerierServiceSdpBindTable 1 } MldStaticQuerierServiceSdpBindEntry ::= SEQUENCE { alaMldStaticQuerierServiceSdpBindRowStatus RowStatus } alaMldStaticQuerierServiceSdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used in accordance with installation and removal conventions for conceptual rows." ::= { alaMldStaticQuerierServiceSdpBindEntry 1 } -- -- Source Table -- alaMldServiceSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF MldServiceSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the Service IP multicast source information." ::= { alaServiceMgrMld 14 } alaMldServiceSourceEntry OBJECT-TYPE SYNTAX MldServiceSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast source flow." INDEX { svcId, alaMldServiceSourceGroupAddressType, alaMldServiceSourceGroupAddress, alaMldServiceSourceHostAddressType, alaMldServiceSourceHostAddress, alaMldServiceSourceDestAddressType, alaMldServiceSourceDestAddress, alaMldServiceSourceOrigAddressType, alaMldServiceSourceOrigAddress } ::= { alaMldServiceSourceTable 1 } MldServiceSourceEntry ::= SEQUENCE { alaMldServiceSourceGroupAddressType InetAddressType, alaMldServiceSourceGroupAddress InetAddress, alaMldServiceSourceHostAddressType InetAddressType, alaMldServiceSourceHostAddress InetAddress, alaMldServiceSourceDestAddressType InetAddressType, alaMldServiceSourceDestAddress InetAddress, alaMldServiceSourceOrigAddressType InetAddressType, alaMldServiceSourceOrigAddress InetAddress, alaMldServiceSourceLocale AluLocation, alaMldServiceSourcePortId TmnxPortID, alaMldServiceSourceEncapValue TmnxEncapVal, alaMldServiceSourceSdpId SdpId, alaMldServiceSourceVcId TmnxVcIdOrNone, alaMldServiceSourceType INTEGER } alaMldServiceSourceGroupAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldServiceSourceEntry 1 } alaMldServiceSourceGroupAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv6 group address." ::= { alaMldServiceSourceEntry 2 } alaMldServiceSourceHostAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldServiceSourceEntry 3 } alaMldServiceSourceHostAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv6 host address." ::= { alaMldServiceSourceEntry 4 } alaMldServiceSourceDestAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldServiceSourceEntry 5 } alaMldServiceSourceDestAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv6 tunnel destination address." ::= { alaMldServiceSourceEntry 6 } alaMldServiceSourceOrigAddressType OBJECT-TYPE SYNTAX InetAddressType (2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type. This release only supports IPv6." ::= { alaMldServiceSourceEntry 7 } alaMldServiceSourceOrigAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast source flow's IPv6 tunnel source address." ::= { alaMldServiceSourceEntry 8 } alaMldServiceSourceLocale OBJECT-TYPE SYNTAX AluLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSourceLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'." ::= { alaMldServiceSourceEntry 9 } alaMldServiceSourcePortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSourcePortId indicates, together with the object alaMldServiceSourceEncapValue, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsMldSnpgMRouterLocale is 'sap(1)'." ::= { alaMldServiceSourceEntry 10 } alaMldServiceSourceEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSourceEncapValue indicates, together with the objectalaMldServiceSourcePortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSourceLocale is 'sap(1)'." ::= { alaMldServiceSourceEntry 11 } alaMldServiceSourceSdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSourceSdpId indicates, together with the object alaMldServiceSourceVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSourceLocale is 'sdp(2)'." ::= { alaMldServiceSourceEntry 12 } alaMldServiceSourceVcId OBJECT-TYPE SYNTAX TmnxVcIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSourceVcId indicates, together with the object alaMldServiceSourceSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSourceLocale is 'sdp(2)'." ::= { alaMldServiceSourceEntry 13 } alaMldServiceSourceType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast source flow's encapsulation type." ::= { alaMldServiceSourceEntry 14 } -- -- Forward Table -- alaMldServiceSapForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF MldServiceSapForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast forward information." ::= { alaServiceMgrMld 15 } alaMldServiceSapForwardEntry OBJECT-TYPE SYNTAX MldServiceSapForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast forwarded flow." INDEX { svcId, alaMldServiceSapForwardGroupAddress, alaMldServiceSapForwardHostAddress, alaMldServiceSapForwardDestAddress, alaMldServiceSapForwardOrigAddress, alaMldServiceSapForwardNextSapPortId, alaMldServiceSapForwardNextSapEncapValue } ::= { alaMldServiceSapForwardTable 1 } MldServiceSapForwardEntry ::= SEQUENCE { alaMldServiceSapForwardLocale AluLocation, alaMldServiceSapForwardPortId TmnxPortID, alaMldServiceSapForwardEncapValue TmnxEncapVal, alaMldServiceSapForwardSdpId SdpId, alaMldServiceSapForwardVcId TmnxVcIdOrNone, alaMldServiceSapForwardGroupAddress MacAddress, alaMldServiceSapForwardHostAddress MacAddress, alaMldServiceSapForwardDestAddress MacAddress, alaMldServiceSapForwardOrigAddress MacAddress, alaMldServiceSapForwardType INTEGER, alaMldServiceSapForwardNextSapPortId TmnxPortID, alaMldServiceSapForwardNextSapEncapValue TmnxEncapVal, alaMldServiceSapForwardNextType INTEGER } alaMldServiceSapForwardLocale OBJECT-TYPE SYNTAX AluLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSapForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'." ::= { alaMldServiceSapForwardEntry 1 } alaMldServiceSapForwardPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSapForwardPortId indicates, together with the object alaMldServiceSapForwardEncapValue, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsMldSnpgMRouterLocale is 'sap(1)'." ::= { alaMldServiceSapForwardEntry 2 } alaMldServiceSapForwardEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSapForwardEncapValue indicates, together with the objectalaMldServiceSapForwardPortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSapForwardLocale is 'sap(1)'." ::= { alaMldServiceSapForwardEntry 3 } alaMldServiceSapForwardSdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSapForwardSdpId indicates, together with the object alaMldServiceSapForwardVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSapForwardLocale is 'sdp(2)'." ::= { alaMldServiceSapForwardEntry 4 } alaMldServiceSapForwardVcId OBJECT-TYPE SYNTAX TmnxVcIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSapForwardVcId indicates, together with the object alaMldServiceSapForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSapForwardLocale is 'sdp(2)'." ::= { alaMldServiceSapForwardEntry 5 } alaMldServiceSapForwardGroupAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 group address." ::= { alaMldServiceSapForwardEntry 6 } alaMldServiceSapForwardHostAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 host address." ::= { alaMldServiceSapForwardEntry 7 } alaMldServiceSapForwardDestAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 tunnel destination address." ::= { alaMldServiceSapForwardEntry 8 } alaMldServiceSapForwardOrigAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 tunnel source address." ::= { alaMldServiceSapForwardEntry 9 } alaMldServiceSapForwardType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's encapsulation type." ::= { alaMldServiceSapForwardEntry 10 } alaMldServiceSapForwardNextSapPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's next SAP. The ID of the access port where this SAP is defined." ::= { alaMldServiceSapForwardEntry 11 } alaMldServiceSapForwardNextSapEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's next SAP. The value of the label used to identify this SAP on the access port specified by sapPortId." ::= { alaMldServiceSapForwardEntry 12 } alaMldServiceSapForwardNextType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's next encapsulation type." ::= { alaMldServiceSapForwardEntry 13 } alaMldServiceSdpBindForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF MldServiceSdpBindForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast forward information." ::= { alaServiceMgrMld 16 } alaMldServiceSdpBindForwardEntry OBJECT-TYPE SYNTAX MldServiceSdpBindForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to an IP multicast forwarded flow." INDEX { svcId, alaMldServiceSdpBindForwardGroupAddress, alaMldServiceSdpBindForwardHostAddress, alaMldServiceSdpBindForwardDestAddress, alaMldServiceSdpBindForwardOrigAddress, alaMldServiceSdpBindForwardNextSdpBindId } ::= { alaMldServiceSdpBindForwardTable 1 } MldServiceSdpBindForwardEntry ::= SEQUENCE { alaMldServiceSdpBindForwardLocale AluLocation, alaMldServiceSdpBindForwardPortId TmnxPortID, alaMldServiceSdpBindForwardEncapValue TmnxEncapVal, alaMldServiceSdpBindForwardSdpId SdpId, alaMldServiceSdpBindForwardVcId TmnxVcIdOrNone, alaMldServiceSdpBindForwardGroupAddress MacAddress, alaMldServiceSdpBindForwardHostAddress MacAddress, alaMldServiceSdpBindForwardDestAddress MacAddress, alaMldServiceSdpBindForwardOrigAddress MacAddress, alaMldServiceSdpBindForwardType INTEGER, alaMldServiceSdpBindForwardNextSdpBindId SdpBindId, alaMldServiceSdpBindForwardNextType INTEGER } alaMldServiceSdpBindForwardLocale OBJECT-TYPE SYNTAX AluLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSdpBindForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'." ::= { alaMldServiceSdpBindForwardEntry 1 } alaMldServiceSdpBindForwardPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSdpBindForwardPortId indicates, together with the object alaMldServiceSdpBindForwardEncapValue, the SdpBind on which this multicast router is detected. The value of this object is only meaningful when the value of tlsMldSnpgMRouterLocale is 'sap(1)'." ::= { alaMldServiceSdpBindForwardEntry 2 } alaMldServiceSdpBindForwardEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSdpBindForwardEncapValue indicates, together with the object alaMldServiceSdpBindForwardPortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSdpBindForwardLocale is 'sap(1)'." ::= { alaMldServiceSdpBindForwardEntry 3 } alaMldServiceSdpBindForwardSdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSdpBindForwardSdpId indicates, together with the object alaMldServiceSdpBindForwardVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSdpBindForwardLocale is 'sdp(2)'." ::= { alaMldServiceSdpBindForwardEntry 4 } alaMldServiceSdpBindForwardVcId OBJECT-TYPE SYNTAX TmnxVcIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object alaMldServiceSdpBindForwardVcId indicates, together with the object alaMldServiceSdpBindForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of alaMldServiceSdpBindForwardLocale is 'sdp(2)'." ::= { alaMldServiceSdpBindForwardEntry 5 } alaMldServiceSdpBindForwardGroupAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 group address." ::= { alaMldServiceSdpBindForwardEntry 6 } alaMldServiceSdpBindForwardHostAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 host address." ::= { alaMldServiceSdpBindForwardEntry 7 } alaMldServiceSdpBindForwardDestAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 tunnel destination address." ::= { alaMldServiceSdpBindForwardEntry 8 } alaMldServiceSdpBindForwardOrigAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's IPv6 tunnel source address." ::= { alaMldServiceSdpBindForwardEntry 9 } alaMldServiceSdpBindForwardType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's encapsulation type." ::= { alaMldServiceSdpBindForwardEntry 10 } alaMldServiceSdpBindForwardNextSdpBindId OBJECT-TYPE SYNTAX SdpBindId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast forwarded flow's next sdpBind." ::= { alaMldServiceSdpBindForwardEntry 11 } alaMldServiceSdpBindForwardNextType OBJECT-TYPE SYNTAX INTEGER { mcast(1), pim(2), ipip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast forwarded flow's next encapsulation type." ::= { alaMldServiceSdpBindForwardEntry 12 } -- -- SAP/SDPBIND Table for IP Multicast objects managed per SAP/SDPBIND -- alaMldServiceSapTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaMldServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast port information." ::= { alaServiceMgrMld 17 } alaMldServiceSapEntry OBJECT-TYPE SYNTAX AlaMldServiceSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to IP multicast Service SAP information." INDEX { svcId, sapPortId, sapEncapValue } ::= { alaMldServiceSapTable 1 } AlaMldServiceSapEntry ::= SEQUENCE { alaMldServiceSapMaxGroupLimit Unsigned32, alaMldServiceSapMaxGroupExceedAction INTEGER, alaMldServiceSapCurrentGroupCount Unsigned32 } alaMldServiceSapMaxGroupLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of MLD Group memberships that can be learnt on the sap." DEFVAL {0} ::= { alaMldServiceSapEntry 1 } alaMldServiceSapMaxGroupExceedAction OBJECT-TYPE SYNTAX INTEGER { none(0), drop(1), replace(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be taken when MLD group membership limit is exceeded for the sap." DEFVAL { none } ::= { alaMldServiceSapEntry 2 } alaMldServiceSapCurrentGroupCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP multicast group memberships on a sap. instance." ::= { alaMldServiceSapEntry 3 } alaMldServiceSdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaMldServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the IP multicast port information." ::= { alaServiceMgrMld 18 } alaMldServiceSdpBindEntry OBJECT-TYPE SYNTAX AlaMldServiceSdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to IP multicast Service SdpBind information." INDEX { svcId, sdpBindId } ::= { alaMldServiceSdpBindTable 1 } AlaMldServiceSdpBindEntry ::= SEQUENCE { alaMldServiceSdpBindMaxGroupLimit Unsigned32, alaMldServiceSdpBindMaxGroupExceedAction INTEGER, alaMldServiceSdpBindCurrentGroupCount Unsigned32 } alaMldServiceSdpBindMaxGroupLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of MLD Group memberships that can be learnt on the SdpBind." DEFVAL {0} ::= { alaMldServiceSdpBindEntry 1 } alaMldServiceSdpBindMaxGroupExceedAction OBJECT-TYPE SYNTAX INTEGER { none(0), drop(1), replace(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be taken when MLD group membership limit is exceeded for the SdpBind." DEFVAL { none } ::= { alaMldServiceSdpBindEntry 2 } alaMldServiceSdpBindCurrentGroupCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP multicast group memberships on a SdpBind. instance." ::= { alaMldServiceSdpBindEntry 3 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- AOS LDP related MIB -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaExtraLdp OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 4 } alaVRtrExtendedLdpGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVRtrExtendedLdpGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "alaVRtrExtendedLdpGeneralTable is an extension to vRtrLdpGeneralTable and it has an entry for each virtual router in the system capable of supporting an instance of the Label Distribution Protocol (LDP)." ::= { alaExtraLdp 1 } alaVRtrExtendedLdpGeneralEntry OBJECT-TYPE SYNTAX AlaVRtrExtendedLdpGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an instance of the Label Distribution Protocol (LDP) for a virtual router in the system. An entry in this table is created by the agent when vRtrLdpStatus in the vRtrConfTable is set to 'create'. The entry is destroyed when vRtrLdpStatus is set to 'delete' but only if vRtrLdpGenAdminState has a value of 'outOfService'." INDEX { alaVRtrLdpGenvRtrID } ::= { alaVRtrExtendedLdpGeneralTable 1 } AlaVRtrExtendedLdpGeneralEntry ::= SEQUENCE { alaVRtrLdpGenGracefulRestartSupport TruthValue, alaVRtrLdpGenGRReconnectTime Unsigned32, alaVRtrLdpGenGRFwdStateHoldTime Unsigned32, alaVRtrLdpGenvRtrID TmnxVRtrID } alaVRtrLdpGenGracefulRestartSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of alaVRtrLdpGenGracefulRestartSupport specifies whether restarting the LSR gracefully during a control plane restart is allowed. When this object has a value of 'true', graceful restart procedures are enabled. When its value is 'false', graceful restart procedures are disabled." DEFVAL { false } ::= { alaVRtrExtendedLdpGeneralEntry 1 } alaVRtrLdpGenGRReconnectTime OBJECT-TYPE SYNTAX Unsigned32 (5..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of alaVRtrLdpGenGRReconnectTime specifies the value of FT Reconnect timer. The FT Reconnect timeout is the time that the sender of the TLV would like the receiver of that TLV to wait after the receiver detects the failure of LDP communication with the sender. This object has meaning only when alaVRtrLdpGenGracefulRestartSupport is true." DEFVAL { 120 } ::= { alaVRtrExtendedLdpGeneralEntry 2 } alaVRtrLdpGenGRFwdStateHoldTime OBJECT-TYPE SYNTAX Unsigned32 (15..1800) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrLdpGenGRFwdStateHoldTime specifies the MPLS forwarding state hold timer. If the forwarding state has been preserved during a control plane restart, then the LSR starts this timer and marks all forwarding entries as stale. At the expiration of the timer all the entries that are still marked as stale are deleted. The value of Recovery Time advertised to the neighbors in the FT session TLV is set to the current value of the timer at the point in which the Initialization message carrying the FT session TLV is sent" DEFVAL { 120 } ::= { alaVRtrExtendedLdpGeneralEntry 3} alaVRtrLdpGenvRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router." ::= { alaVRtrExtendedLdpGeneralEntry 4 } alaVRtrLdpExtendedSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaVRtrLdpExtendedSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "alaVRtrLdpExtendedSessionTable is an extension to vRtrLdpSessionTable. This isa read-only table which parallels the mplsLdpSessionTable in the MPLS-LDP-MIB. The purpose of this table is to keep information about a single session between an LDP entity and an LDP Peer" ::= { alaExtraLdp 2 } alaVRtrLdpExtendedSessionEntry OBJECT-TYPE SYNTAX AlaVRtrLdpExtendedSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information about a single session between an LDP entity and an LDP Peer." INDEX { alaVRtrLdpSessvRtrID, alaVRtrLdpPeerLdpId } ::= { alaVRtrLdpExtendedSessionTable 1 } AlaVRtrLdpExtendedSessionEntry ::= SEQUENCE { alaVRtrLdpPeerLdpId MplsLdpIdentifier, alaVRtrLdpSessRestartInProgress TruthValue, alaVRtrLdpSessFtReconTimeAdvertised Unsigned32, alaVRtrLdpSessFtRecoveryTimeAdvertised Unsigned32, alaVRtrLdpSessvRtrID TmnxVRtrID } alaVRtrLdpPeerLdpId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of alaVRtrLdpSessLocalLdpId specifies the local LDP identifier for this LDP session." ::= { alaVRtrLdpExtendedSessionEntry 1 } alaVRtrLdpSessRestartInProgress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of alaVRtrLdpSessRestartInProgress indicates whether graceful restart is in progress for this session" ::= { alaVRtrLdpExtendedSessionEntry 2 } alaVRtrLdpSessFtReconTimeAdvertised OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of alaVRtrLdpSessFtReconTimeAdvertised indicates the session's Fault Tolerant(FT) Reconnect Timeout advertised to the peer" ::= { alaVRtrLdpExtendedSessionEntry 3 } alaVRtrLdpSessFtRecoveryTimeAdvertised OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of alaVRtrLdpSessFtRecoveryTimeAdvertised indicates the session's Fault Tolerant(FT) recovery timeout that was advertised to the peer." ::= { alaVRtrLdpExtendedSessionEntry 4 } alaVRtrLdpSessvRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router." ::= { alaVRtrLdpExtendedSessionEntry 5 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- AOS RFP OVER SPB related MIB -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaRfpSpb OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 5 } alaRfpSpbLocalEndPointTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRfpSpbLocalEndPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has the information about the local end points for the point to point service." ::= { alaRfpSpb 1 } alaRfpSpbLocalEndPointEntry OBJECT-TYPE SYNTAX AlaRfpSpbLocalEndPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local End Point Entry." INDEX { alaRfpSpbLocalEndPointRfp, alaRfpSpbLocalEndPoint } ::= { alaRfpSpbLocalEndPointTable 1 } AlaRfpSpbLocalEndPointEntry ::= SEQUENCE { alaRfpSpbLocalEndPointRfp Unsigned32, alaRfpSpbLocalEndPoint Unsigned32, alaRfpSpbLocalEndPointCcmInterval INTEGER, alaRfpSpbLocalEndPointAdminStatus INTEGER, alaRfpSpbLocalEndPointLevel Integer32, alaRfpSpbLocalEndPointCBVlan Integer32, alaRfpSpbLocalEndPointMaintDomain SnmpAdminString, alaRfpSpbLocalEndPointMaintAssociation SnmpAdminString, alaRfpSpbLocalEndPointRowStatus RowStatus } alaRfpSpbLocalEndPointRfp OBJECT-TYPE SYNTAX Unsigned32(1..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the id for the RFP domain." ::= { alaRfpSpbLocalEndPointEntry 1 } alaRfpSpbLocalEndPoint OBJECT-TYPE SYNTAX Unsigned32(1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the local end point number for Virtual UP MEP used in Ethernet OAM." ::= { alaRfpSpbLocalEndPointEntry 2 } alaRfpSpbLocalEndPointCcmInterval OBJECT-TYPE SYNTAX INTEGER { oneSecond(1), oneMinute(2), tenSeconds(3), tenMinutes(4), hundredMilliSeconds(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Continuity Check Messages Interval." DEFVAL { oneSecond } ::= { alaRfpSpbLocalEndPointEntry 3 } alaRfpSpbLocalEndPointAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The admin status of this local end point enable: This will trigger generation of CCM messages. disable: This will stop generation of CCM messages. " DEFVAL { enable } ::= { alaRfpSpbLocalEndPointEntry 4 } alaRfpSpbLocalEndPointLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This is the level at which the maintenance domain will be created." ::= { alaRfpSpbLocalEndPointEntry 5 } alaRfpSpbLocalEndPointCBVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the primary VLAN used in the maintenance association for OAM domain." ::= { alaRfpSpbLocalEndPointEntry 6 } alaRfpSpbLocalEndPointMaintDomain OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is the name used for OAM maintenance domain in a string format." ::= { alaRfpSpbLocalEndPointEntry 7 } alaRfpSpbLocalEndPointMaintAssociation OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is the name used for OAM maintenance association in a string format." ::= { alaRfpSpbLocalEndPointEntry 8 } alaRfpSpbLocalEndPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { alaRfpSpbLocalEndPointEntry 9 } alaRfpSpbRemoteEndPointTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaRfpRemoteEndPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has the information about the remote end points for the point to point service." ::= { alaRfpSpb 2 } alaRfpSpbRemoteEndPointEntry OBJECT-TYPE SYNTAX AlaRfpRemoteEndPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote End Point Entry." INDEX { alaRfpSpbRemoteEndPointRfp, alaRfpSpbRemoteEndPoint , alaRfpSpbRemoteEndPointServiceID } ::= { alaRfpSpbRemoteEndPointTable 1 } AlaRfpRemoteEndPointEntry ::= SEQUENCE { alaRfpSpbRemoteEndPointRfp Unsigned32, alaRfpSpbRemoteEndPoint Unsigned32, alaRfpSpbRemoteEndPointServiceID Unsigned32, alaRfpSpbRemoteEndPointStatus INTEGER, alaRfpSpbRemoteEndPointSystemName SnmpAdminString, alaRfpSpbRemoteEndPointISID Integer32, alaRfpSpbRemoteEndPointBVlan Integer32, alaRfpSpbRemoteEndPointRowStatus RowStatus } alaRfpSpbRemoteEndPointRfp OBJECT-TYPE SYNTAX Unsigned32(1..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the id for the RFP domain." ::= { alaRfpSpbRemoteEndPointEntry 1 } alaRfpSpbRemoteEndPoint OBJECT-TYPE SYNTAX Unsigned32(1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "These are the remote end point numbers allowed by the maintenance domain/level." ::= { alaRfpSpbRemoteEndPointEntry 2 } alaRfpSpbRemoteEndPointServiceID OBJECT-TYPE SYNTAX Unsigned32(1..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the service id learnt from remote end point." ::= { alaRfpSpbRemoteEndPointEntry 3 } alaRfpSpbRemoteEndPointStatus OBJECT-TYPE SYNTAX INTEGER { ok (1), failed(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the remote BEB (Back Bone Edge Bridge) status." ::= { alaRfpSpbRemoteEndPointEntry 4 } alaRfpSpbRemoteEndPointSystemName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is the system name of remote BEB." ::= { alaRfpSpbRemoteEndPointEntry 5 } alaRfpSpbRemoteEndPointISID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ISID value associated with service id from remote end point." ::= { alaRfpSpbRemoteEndPointEntry 6 } alaRfpSpbRemoteEndPointBVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the BVLAN value associated with a service Id from remote end point." ::= { alaRfpSpbRemoteEndPointEntry 7 } alaRfpSpbRemoteEndPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Remote End Point Entry Status." ::= { alaRfpSpbRemoteEndPointEntry 8 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Service Manager Trap Object Definition -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx smgrServiceError NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSvcType, alaSvcIsid, alaSvcBVlan, alaSvcMulticastMode} STATUS current DESCRIPTION "A major trap to indicate a failure to create/delete a service successfully." ::= { alaServiceMgrNotifications 1 } smgrServiceHwError NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSvcType, alaSvcVFI, alaSvcMcIndex } STATUS current DESCRIPTION "A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a service, or to program the hardware tables for a service successfully." ::= { alaServiceMgrNotifications 2 } smgrSapError NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSapPortId, alaSapEncapValue } STATUS current DESCRIPTION "A major trap to indicate a failure to create/delete a Service Access Point successfully." ::= { alaServiceMgrNotifications 3 } smgrSapHwError NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSapPortId, alaSapEncapValue, alaSvcVFI, alaSapVirtualPort } STATUS current DESCRIPTION "A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a SAP, or to program the hardware tables for a SAP successfully." ::= { alaServiceMgrNotifications 4 } smgrSdpError NOTIFICATION-TYPE OBJECTS { alaSdpId, alaSdpNetworkPort, alaSdpBVlan, alaSdpSystemId } STATUS current DESCRIPTION "A major trap to indicate a failure to create/delete a Service Distribution Point successfully." ::= { alaServiceMgrNotifications 5 } smgrSdpHwError NOTIFICATION-TYPE OBJECTS { alaSdpId, alaSdpNetworkPort, alaSdpBVlan, alaSdpSystemId } STATUS current DESCRIPTION "A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a SDP, or to program the hardware tables for a SDP successfully." ::= { alaServiceMgrNotifications 6 } smgrSdpBindError NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSdpBindId, alaSdpBindNetworkPort, alaSdpBindBVlan, alaSdpBindSystemId } STATUS current DESCRIPTION "A major trap to indicate a failure to create/delete a SDP Bind successfully." ::= { alaServiceMgrNotifications 7 } smgrSdpBindHwError NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSdpBindId, alaSdpBindNetworkPort, alaSdpBindBVlan, alaSdpBindSystemId, alaSdpBindVirtualPort } STATUS current DESCRIPTION "A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a SDP Bind, or to program the hardware tables for a SDP Bind successfully." ::= { alaServiceMgrNotifications 8 } smgrGeneralError NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSvcType } STATUS current DESCRIPTION "A major trap to indicate a general system failure detected during normal system operation." ::= { alaServiceMgrNotifications 9 } smgrStatusChange NOTIFICATION-TYPE OBJECTS { alaSvcId, alaSvcType, alaSvcOperStatus, alaSvcNumSaps, alaSvcNumSdps } STATUS deprecated DESCRIPTION "A trap to indicate a status change for a group of selected services." ::= { alaServiceMgrNotifications 10 } smgrServiceStatusChange NOTIFICATION-TYPE OBJECTS {alaSvcId, alaSvcType, alaSvcOperStatus, alaSvcIsid, alaSvcBVlan, alaSvcMulticastMode} STATUS current DESCRIPTION "A change in service operating status. A service is operationally up when it's admin-up and there's at least one active SAP or one active bind that is operationally up." ::= { alaServiceMgrNotifications 11} smgrSapStatusChange NOTIFICATION-TYPE OBJECTS {alaSvcId, alaSapPortId, alaSapEncapValue, alaSapOperStatus} STATUS current DESCRIPTION "A change in SAP operating status. A SAP is operationally up when it's admin-up and the link status of the physical or logical port of the SAP is operationally up." ::= { alaServiceMgrNotifications 12 } smgrSdpStatusChange NOTIFICATION-TYPE OBJECTS {alaSdpId, alaSdpOperStatus, alaSdpNetworkPort, alaSdpBVlan, alaSdpSystemId, alaSdpSystemName, alaSdpDynamicType, alaSdpIsid} STATUS current DESCRIPTION "A change in SDP operating status. For SPB, the SDP is dynamically created or destroyed as calculated by ISIS protocol when a unicast/multicast path to reach a neighbor node is determined." ::= { alaServiceMgrNotifications 13 } smgrSdpBindStatusChange NOTIFICATION-TYPE OBJECTS {alaSvcId, alaSdpBindId, alaSdpBindOperStatus, alaSdpBindNetworkPort, alaSdpBindBVlan, alaSdpBindSystemId, alaSdpBindSystemName, alaSdpBindIsid} STATUS current DESCRIPTION "A change in SDP Bind operating status. For SPB, the SDP Bind is dynamically created or destroyed as detected by ISIS when the same isid is configured in the neighbor node." ::= { alaServiceMgrNotifications 14 } smgrVxlanSdpBindStatusChange NOTIFICATION-TYPE OBJECTS {alaSvcId, alaSdpBindId, alaSdpBindOperStatus, alaSdpBindFarEndIpAddress, alaSdpBindVnid} STATUS current DESCRIPTION "A change in SDP Bind operating status. A SDP Bind is dynamically created as a VTEP is discovered, or destroyed when the reachability to the VTEP is gone." ::= { alaServiceMgrNotifications 15 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- COMPLIANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1ServiceMgrMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for service manager." MODULE MANDATORY-GROUPS { alaServiceMgrPortProfileGroup, alaServiceMgrPortGroup, alaSapExtraInfoGroup, alaIgmpServiceGroup, alaIgmpMemberServiceSapGroup, alaIgmpMemberServiceSdpBindGroup, alaIgmpStaticMemberServiceSapGroup, alaIgmpStaticMemberServiceSdpBindGroup, alaIgmpNeighborServiceSapGroup, alaIgmpNeighborServiceSdpBindGroup, alaIgmpStaticNeighborServiceSapGroup, alaIgmpStaticNeighborServiceSdpBindGroup, alaIgmpQuerierServiceSapGroup, alaIgmpQuerierServiceSdpBindGroup, alaIgmpStaticQuerierServiceSapGroup, alaIgmpStaticQuerierServiceSdpBindGroup, alaIgmpServiceSourceGroup, alaIgmpServiceSapForwardGroup, alaIgmpServiceSdpBindForwardGroup, alaIgmpServiceSapGroup, alaIgmpServiceSdpBindGroup, alaMldServiceGroup, alaMldMemberServiceSapGroup, alaMldMemberServiceSdpBindGroup, alaMldStaticMemberServiceSapGroup, alaMldStaticMemberServiceSdpBindGroup, alaMldNeighborServiceSapGroup, alaMldNeighborServiceSdpBindGroup, alaMldStaticNeighborServiceSapGroup, alaMldStaticNeighborServiceSdpBindGroup, alaMldQuerierServiceSapGroup, alaMldQuerierServiceSdpBindGroup, alaMldStaticQuerierServiceSapGroup, alaMldStaticQuerierServiceSdpBindGroup, alaMldServiceSourceGroup, alaMldServiceSapForwardGroup, alaMldServiceSdpBindForwardGroup, alaMldServiceSapGroup, alaMldServiceSdpBindGroup, alaVRtrExtendedLdpGeneralGroup, alaVRtrLdpExtendedSessionGroup, alaSvcBaseInfoEntryGroup, alaSapBaseInfoEntryGroup, alaSdpInfoTableGroup, alaSdpBindTableGroup, alaSvcMgrSysTableGroup, alaSvcMgrEndPointGroup } ::= { alcatelIND1ServiceMgrMIBCompliances 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- UNITS OF CONFORMANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaServiceMgrPortProfileGroup OBJECT-GROUP OBJECTS { alaServiceMgrPortProfileStpBpduTreatment, alaServiceMgrPortProfile8021xTreatment, alaServiceMgrPortProfile8021ABTreatment, alaServiceMgrPortProfile8023adTreatment, alaServiceMgrPortProfileGvrpTreatment, alaServiceMgrPortProfileAmapTreatment, alaServiceMgrPortProfileRowStatus, alaServiceMgrPortProfileMvrpTreatment, alaServiceMgrPortProfileCiscoPduTreatment, alaServiceMgrPortProfileCiscoVlanTreatment, alaServiceMgrPortProfileCiscoUplinkTreatment } STATUS current DESCRIPTION "Collection of objects for management of Service Manager Port Profiles." ::= { alcatelIND1ServiceMgrMIBGroups 1 } alaServiceMgrPortGroup OBJECT-GROUP OBJECTS { alaServiceMgrPortMode, alaServiceMgrPortEncapType, -- deprecated alaServiceMgrPortPortProfileID, alaServiceMgrPortRowStatus, alaServiceMgrPortLinkStatus, alaServiceMgrPortSapType, alaServiceMgrPortSapCount, alaServiceMgrPortVlanXlation, alaServiceMgrPortDescription } STATUS current DESCRIPTION "Collection of objects for management of Service Manager Access Port." ::= { alcatelIND1ServiceMgrMIBGroups 2 } alaSapExtraInfoGroup OBJECT-GROUP OBJECTS { alaSapInfoTrusted, alaSapInfoPriority } STATUS obsolete DESCRIPTION "Collection of objects for management of Sap extra info." ::= { alcatelIND1ServiceMgrMIBGroups 3 } alaIgmpServiceGroup OBJECT-GROUP OBJECTS { alaIgmpServiceStatus, alaIgmpServiceQuerying, alaIgmpServiceSpoofing, alaIgmpServiceZapping, alaIgmpServiceVersion, alaIgmpServiceRobustness, alaIgmpServiceQueryInterval, alaIgmpServiceQueryResponseInterval, alaIgmpServiceLastMemberQueryInterval, alaIgmpServiceRouterTimeout, alaIgmpServiceSourceTimeout, alaIgmpServiceProxying, alaIgmpServiceUnsolicitedReportInterval, alaIgmpServiceQuerierForwarding, alaIgmpServiceMaxGroupLimit, alaIgmpServiceMaxGroupExceedAction } STATUS current DESCRIPTION "Collection of objects for management of service igmp object." ::= { alcatelIND1ServiceMgrMIBGroups 4 } alaIgmpMemberServiceSapGroup OBJECT-GROUP OBJECTS { alaIgmpMemberServiceSapMode, alaIgmpMemberServiceSapCount, alaIgmpMemberServiceSapTimeout } STATUS current DESCRIPTION "Collection of objects for management of service igmp member sap object." ::= { alcatelIND1ServiceMgrMIBGroups 5 } alaIgmpMemberServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaIgmpMemberServiceSdpBindMode, alaIgmpMemberServiceSdpBindCount, alaIgmpMemberServiceSdpBindTimeout } STATUS current DESCRIPTION "Collection of objects for management of service igmp member sdp binding object." ::= { alcatelIND1ServiceMgrMIBGroups 6 } alaIgmpStaticMemberServiceSapGroup OBJECT-GROUP OBJECTS { alaIgmpStaticMemberServiceSapRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service igmp static member sap object." ::= { alcatelIND1ServiceMgrMIBGroups 7 } alaIgmpStaticMemberServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaIgmpStaticMemberServiceSdpBindRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service igmp static member sdp binding object." ::= { alcatelIND1ServiceMgrMIBGroups 8 } alaIgmpNeighborServiceSapGroup OBJECT-GROUP OBJECTS { alaIgmpNeighborServiceSapCount, alaIgmpNeighborServiceSapTimeout } STATUS current DESCRIPTION "Collection of objects for management of service igmp sap neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 9 } alaIgmpNeighborServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaIgmpNeighborServiceSdpBindCount, alaIgmpNeighborServiceSdpBindTimeout } STATUS current DESCRIPTION "Collection of objects for management of service igmp SdpBind neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 10 } alaIgmpStaticNeighborServiceSapGroup OBJECT-GROUP OBJECTS { alaIgmpStaticNeighborServiceSapRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service igmp sap static neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 11 } alaIgmpStaticNeighborServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaIgmpStaticNeighborServiceSdpBindRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service igmp SdpBind static neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 12 } alaIgmpQuerierServiceSapGroup OBJECT-GROUP OBJECTS { alaIgmpQuerierServiceSapCount, alaIgmpQuerierServiceSapTimeout } STATUS current DESCRIPTION "Collection of objects for management of service sap igmp querier object." ::= { alcatelIND1ServiceMgrMIBGroups 13 } alaIgmpQuerierServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaIgmpQuerierServiceSdpBindCount, alaIgmpQuerierServiceSdpBindTimeout } STATUS current DESCRIPTION "Collection of objects for management of service SdpBind igmp querier object." ::= { alcatelIND1ServiceMgrMIBGroups 14 } alaIgmpStaticQuerierServiceSapGroup OBJECT-GROUP OBJECTS { alaIgmpStaticQuerierServiceSapRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service sap igmp static querier object." ::= { alcatelIND1ServiceMgrMIBGroups 15 } alaIgmpStaticQuerierServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaIgmpStaticQuerierServiceSdpBindRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service SdpBind igmp static querier object." ::= { alcatelIND1ServiceMgrMIBGroups 16 } alaIgmpServiceSourceGroup OBJECT-GROUP OBJECTS { alaIgmpServiceSourceLocale, alaIgmpServiceSourcePortId, alaIgmpServiceSourceEncapValue, alaIgmpServiceSourceSdpId, alaIgmpServiceSourceVcId, alaIgmpServiceSourceType } STATUS current DESCRIPTION "Collection of objects for management of igmp service source object." ::= { alcatelIND1ServiceMgrMIBGroups 17 } alaIgmpServiceSapForwardGroup OBJECT-GROUP OBJECTS { alaIgmpServiceSapForwardLocale, alaIgmpServiceSapForwardPortId, alaIgmpServiceSapForwardEncapValue, alaIgmpServiceSapForwardSdpId, alaIgmpServiceSapForwardVcId, alaIgmpServiceSapForwardType, alaIgmpServiceSapForwardNextType } STATUS current DESCRIPTION "Collection of objects for management of igmp service sap forward object." ::= { alcatelIND1ServiceMgrMIBGroups 18 } alaIgmpServiceSdpBindForwardGroup OBJECT-GROUP OBJECTS { alaIgmpServiceSdpBindForwardLocale, alaIgmpServiceSdpBindForwardPortId, alaIgmpServiceSdpBindForwardEncapValue, alaIgmpServiceSdpBindForwardSdpId, alaIgmpServiceSdpBindForwardVcId, alaIgmpServiceSdpBindForwardType, alaIgmpServiceSdpBindForwardNextType } STATUS current DESCRIPTION "Collection of objects for management of igmp service SdpBind forward object." ::= { alcatelIND1ServiceMgrMIBGroups 19 } alaIgmpServiceSapGroup OBJECT-GROUP OBJECTS { alaIgmpServiceSapMaxGroupLimit, alaIgmpServiceSapMaxGroupExceedAction, alaIgmpServiceSapCurrentGroupCount } STATUS current DESCRIPTION "Collection of objects for management of igmp service sap object." ::= { alcatelIND1ServiceMgrMIBGroups 20 } alaIgmpServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaIgmpServiceSdpBindMaxGroupLimit, alaIgmpServiceSdpBindMaxGroupExceedAction, alaIgmpServiceSdpBindCurrentGroupCount } STATUS current DESCRIPTION "Collection of objects for management of igmp service SdpBind object." ::= { alcatelIND1ServiceMgrMIBGroups 21 } alaMldServiceGroup OBJECT-GROUP OBJECTS { alaMldServiceStatus, alaMldServiceQuerying, alaMldServiceSpoofing, alaMldServiceZapping, alaMldServiceVersion, alaMldServiceRobustness, alaMldServiceQueryInterval, alaMldServiceQueryResponseInterval, alaMldServiceLastMemberQueryInterval, alaMldServiceRouterTimeout, alaMldServiceSourceTimeout, alaMldServiceProxying, alaMldServiceUnsolicitedReportInterval, alaMldServiceQuerierForwarding, alaMldServiceMaxGroupLimit, alaMldServiceMaxGroupExceedAction } STATUS current DESCRIPTION "Collection of objects for management of service MLD object." ::= { alcatelIND1ServiceMgrMIBGroups 22 } alaMldMemberServiceSapGroup OBJECT-GROUP OBJECTS { alaMldMemberServiceSapMode, alaMldMemberServiceSapCount, alaMldMemberServiceSapTimeout } STATUS current DESCRIPTION "Collection of objects for management of service MLD member sap object." ::= { alcatelIND1ServiceMgrMIBGroups 23 } alaMldMemberServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaMldMemberServiceSdpBindMode, alaMldMemberServiceSdpBindCount, alaMldMemberServiceSdpBindTimeout } STATUS current DESCRIPTION "Collection of objects for management of service MLD member sdp binding object." ::= { alcatelIND1ServiceMgrMIBGroups 24 } alaMldStaticMemberServiceSapGroup OBJECT-GROUP OBJECTS { alaMldStaticMemberServiceSapRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service MLD static member sap object." ::= { alcatelIND1ServiceMgrMIBGroups 25 } alaMldStaticMemberServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaMldStaticMemberServiceSdpBindRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service MLD static member sdp binding object." ::= { alcatelIND1ServiceMgrMIBGroups 26 } alaMldNeighborServiceSapGroup OBJECT-GROUP OBJECTS { alaMldNeighborServiceSapCount, alaMldNeighborServiceSapTimeout } STATUS current DESCRIPTION "Collection of objects for management of service MLD sap neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 27 } alaMldNeighborServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaMldNeighborServiceSdpBindCount, alaMldNeighborServiceSdpBindTimeout } STATUS current DESCRIPTION "Collection of objects for management of service MLD SdpBind neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 28 } alaMldStaticNeighborServiceSapGroup OBJECT-GROUP OBJECTS { alaMldStaticNeighborServiceSapRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service MLD sap static neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 29 } alaMldStaticNeighborServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaMldStaticNeighborServiceSdpBindRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service MLD SdpBind static neighbor object." ::= { alcatelIND1ServiceMgrMIBGroups 30 } alaMldQuerierServiceSapGroup OBJECT-GROUP OBJECTS { alaMldQuerierServiceSapCount, alaMldQuerierServiceSapTimeout } STATUS current DESCRIPTION "Collection of objects for management of service sap MLD querier object." ::= { alcatelIND1ServiceMgrMIBGroups 31 } alaMldQuerierServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaMldQuerierServiceSdpBindCount, alaMldQuerierServiceSdpBindTimeout } STATUS current DESCRIPTION "Collection of objects for management of service SdpBind MLD querier object." ::= { alcatelIND1ServiceMgrMIBGroups 32 } alaMldStaticQuerierServiceSapGroup OBJECT-GROUP OBJECTS { alaMldStaticQuerierServiceSapRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service sap MLD static querier object." ::= { alcatelIND1ServiceMgrMIBGroups 33 } alaMldStaticQuerierServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaMldStaticQuerierServiceSdpBindRowStatus } STATUS current DESCRIPTION "Collection of objects for management of service SdpBind MLD static querier object." ::= { alcatelIND1ServiceMgrMIBGroups 34 } alaMldServiceSourceGroup OBJECT-GROUP OBJECTS { alaMldServiceSourceLocale, alaMldServiceSourcePortId, alaMldServiceSourceEncapValue, alaMldServiceSourceSdpId, alaMldServiceSourceVcId, alaMldServiceSourceType } STATUS current DESCRIPTION "Collection of objects for management of MLD service source object." ::= { alcatelIND1ServiceMgrMIBGroups 35 } alaMldServiceSapForwardGroup OBJECT-GROUP OBJECTS { alaMldServiceSapForwardLocale, alaMldServiceSapForwardPortId, alaMldServiceSapForwardEncapValue, alaMldServiceSapForwardSdpId, alaMldServiceSapForwardVcId, alaMldServiceSapForwardType, alaMldServiceSapForwardNextType } STATUS current DESCRIPTION "Collection of objects for management of MLD service sap forward object." ::= { alcatelIND1ServiceMgrMIBGroups 36 } alaMldServiceSdpBindForwardGroup OBJECT-GROUP OBJECTS { alaMldServiceSdpBindForwardLocale, alaMldServiceSdpBindForwardPortId, alaMldServiceSdpBindForwardEncapValue, alaMldServiceSdpBindForwardSdpId, alaMldServiceSdpBindForwardVcId, alaMldServiceSdpBindForwardType, alaMldServiceSdpBindForwardNextType } STATUS current DESCRIPTION "Collection of objects for management of MLD service SdpBind forward object." ::= { alcatelIND1ServiceMgrMIBGroups 37 } alaMldServiceSapGroup OBJECT-GROUP OBJECTS { alaMldServiceSapMaxGroupLimit, alaMldServiceSapMaxGroupExceedAction, alaMldServiceSapCurrentGroupCount } STATUS current DESCRIPTION "Collection of objects for management of MLD service sap object." ::= { alcatelIND1ServiceMgrMIBGroups 38 } alaMldServiceSdpBindGroup OBJECT-GROUP OBJECTS { alaMldServiceSdpBindMaxGroupLimit, alaMldServiceSdpBindMaxGroupExceedAction, alaMldServiceSdpBindCurrentGroupCount } STATUS current DESCRIPTION "Collection of objects for management of MLD service SdpBind object." ::= { alcatelIND1ServiceMgrMIBGroups 39 } alaVRtrExtendedLdpGeneralGroup OBJECT-GROUP OBJECTS { alaVRtrLdpGenGracefulRestartSupport, alaVRtrLdpGenGRReconnectTime, alaVRtrLdpGenGRFwdStateHoldTime, alaVRtrLdpGenvRtrID } STATUS current DESCRIPTION "Collection of objects for management of MLD service SdpBind object." ::= { alcatelIND1ServiceMgrMIBGroups 40 } alaVRtrLdpExtendedSessionGroup OBJECT-GROUP OBJECTS { alaVRtrLdpSessRestartInProgress, alaVRtrLdpSessFtReconTimeAdvertised, alaVRtrLdpSessFtRecoveryTimeAdvertised, alaVRtrLdpSessvRtrID } STATUS current DESCRIPTION "Collection of objects for management of MLD service SdpBind object." ::= { alcatelIND1ServiceMgrMIBGroups 41 } alaSvcBaseInfoEntryGroup OBJECT-GROUP OBJECTS { alaSvcId, alaSvcRowStatus, alaSvcType, alaSvcDescription, alaSvcMtu, alaSvcAdminStatus, alaSvcOperStatus, alaSvcNumSaps, alaSvcNumSdps, alaSvcLastMgmtChange, alaSvcLastStatusChange, alaSvcDefMeshVcId, alaSvcVFI, alaSvcMcIndex, alaSvcAllocationType, alaSvcStatsAdminStatus, alaSvcRemoteFlushStatus, alaSvcIsid, alaSvcBVlan, alaSvcMulticastMode, alaSvcIngressPacketCount, alaSvcIngressByteCount, alaSvcEgressPacketCount, alaSvcEgressByteCount, alaSvcClearCounters, alaSvcSapVlanXlation, alaSvcVnid, alaSvcRemoveIngressTag, alaSvcL3VpnIfIndex, alaSvcL3VpnIfName, alaSvcL3VpnVrfName, alaSvcL3VpnMtu } STATUS current DESCRIPTION "Collection of Service Manager management objects." ::= { alcatelIND1ServiceMgrMIBGroups 42 } alaSapBaseInfoEntryGroup OBJECT-GROUP OBJECTS { alaSapPortId, alaSapEncapValue, alaSapRowStatus, alaSapType, alaSapDescription, alaSapAdminStatus, alaSapOperStatus, alaSapLastMgmtChange, alaSapLastStatusChange, alaSapOperFlags, alaSapTrusted, alaSapPriority, alaSapSvcId, alaSapSvcVFI, alaSapVirtualPort, alaSapAllocationType, alaSapStatsAdminStatus, alaSapIngressPacketCount, alaSapIngressByteCount, alaSapEgressPacketCount, alaSapEgressByteCount, alaSapClearCounters } STATUS current DESCRIPTION "Collection of SAP management objects." ::= { alcatelIND1ServiceMgrMIBGroups 43 } alaSdpInfoTableGroup OBJECT-GROUP OBJECTS { alaSdpRowStatus, alaSdpSvcType, alaSdpDelivery, alaSdpFarEndIpAddress, alaSdpDescription, alaSdpLabelSignaling, alaSdpAdminStatus, alaSdpOperStatus, alaSdpAdminPathMtu, alaSdpOperPathMtu, alaSdpLastMgmtChange, alaSdpLdpEnabled, alaSdpVlanVcEtype, alaSdpAdvertisedVllMtuOverride, alaSdpOperFlags, alaSdpLastStatusChange, alaSdpNetworkPort, alaSdpBVlan, alaSdpSystemId, alaSdpSystemName, alaSdpSpSourceId, alaSdpAllocationType, alaSdpDynamicType, alaSdpBindCount, alaSdpIsid, alaSdpMcastPortList, alaSdpCreationOrigin, alaSdpAdminTTL } STATUS current DESCRIPTION "Collection of SDP management objects." ::= { alcatelIND1ServiceMgrMIBGroups 44 } alaSdpBindTableGroup OBJECT-GROUP OBJECTS { alaSdpBindId, alaSdpBindRowStatus, alaSdpBindSvcType, alaSdpBindAdminIngressLabel, alaSdpBindAdminEgressLabel, alaSdpBindOperIngressLabel, alaSdpBindOperEgressLabel, alaSdpBindAdminStatus, alaSdpBindOperStatus, alaSdpBindLastMgmtChange, alaSdpBindType, alaSdpBindOperFlags, alaSdpBindLastStatusChange, alaSdpBindControlWordBit, alaSdpBindOperControlWord, alaSdpBindNetworkPort, alaSdpBindVirtualPort, alaSdpBindIsid, alaSdpBindBVlan, alaSdpBindSystemId, alaSdpBindSystemName, alaSdpBindAllocationType, alaSdpBindIngressPacketCount, alaSdpBindIngressByteCount, alaSdpBindEgressPacketCount, alaSdpBindEgressByteCount, alaSdpBindCreationOrigin, alaSdpBindFarEndIpAddress, alaSdpBindVnid, alaSdpBindDescription, alaSdpBindStatsAdminStatus } STATUS current DESCRIPTION "Collection of SDP-Bind management objects." ::= { alcatelIND1ServiceMgrMIBGroups 45 } alaSmgrNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { smgrGeneralError, smgrSapError, smgrSdpBindError, smgrSdpError, smgrServiceError, smgrStatusChange, smgrServiceStatusChange, smgrSapStatusChange, smgrSdpStatusChange, smgrSdpBindStatusChange, smgrVxlanSdpBindStatusChange } STATUS current DESCRIPTION " Collection of Service Mgr errors." ::= { alcatelIND1ServiceMgrMIBGroups 46 } alaSmgrHwNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { smgrSapHwError, smgrSdpBindHwError, smgrSdpHwError, smgrServiceHwError } STATUS current DESCRIPTION " Collection of Service Mgr Hw errors." ::= { alcatelIND1ServiceMgrMIBGroups 47 } alaSvcMgrSysTableGroup OBJECT-GROUP OBJECTS { alaSvcMgrSysId, alaSvcMgrSysName, alaSvcMgrSdpTrapAdminState, alaSvcMgrSvcTrapAdminState, alaSvcMgrSapTrapAdminState, alaSvcMgrSdpBindTrapAdminState, alaSvcMgrMaxTrapPerMinute, alaSvcMgrSysLastMgmtChange, alaSvcMgrSysLastStatusChange, alaSvcMgrStatsAdminState, alaSvcMgrVxlanDestUdpPort, alaSvcMgrVxlanVrfName } STATUS current DESCRIPTION "Collection of Service Mgr System management objects." ::= { alcatelIND1ServiceMgrMIBGroups 48 } alaSvcMgrEndPointGroup OBJECT-GROUP OBJECTS { alaRfpSpbLocalEndPointCcmInterval, alaRfpSpbLocalEndPointAdminStatus, alaRfpSpbLocalEndPointLevel, alaRfpSpbLocalEndPointCBVlan, alaRfpSpbLocalEndPointMaintDomain, alaRfpSpbLocalEndPointMaintAssociation, alaRfpSpbLocalEndPointRowStatus, alaRfpSpbRemoteEndPointStatus, alaRfpSpbRemoteEndPointSystemName, alaRfpSpbRemoteEndPointISID, alaRfpSpbRemoteEndPointBVlan, alaRfpSpbRemoteEndPointRowStatus } STATUS current DESCRIPTION "Collection of Service Mgr System management objects." ::= { alcatelIND1ServiceMgrMIBGroups 49 } END